| /* |
| * linux/include/asm-arm/hardware/serial_amba.h |
| * |
| * Internal header file for AMBA serial ports |
| * |
| * Copyright (C) ARM Limited |
| * Copyright (C) 2000 Deep Blue Solutions Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H |
| #define ASM_ARM_HARDWARE_SERIAL_AMBA_H |
| |
| #include <linux/types.h> |
| |
| /* ------------------------------------------------------------------------------- |
| * From AMBA UART (PL010) Block Specification |
| * ------------------------------------------------------------------------------- |
| * UART Register Offsets. |
| */ |
| #define UART01x_DR 0x00 /* Data read or written from the interface. */ |
| #define UART01x_RSR 0x04 /* Receive status register (Read). */ |
| #define UART01x_ECR 0x04 /* Error clear register (Write). */ |
| #define UART010_LCRH 0x08 /* Line control register, high byte. */ |
| #define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */ |
| #define UART010_LCRM 0x0C /* Line control register, middle byte. */ |
| #define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */ |
| #define UART010_LCRL 0x10 /* Line control register, low byte. */ |
| #define UART010_CR 0x14 /* Control register. */ |
| #define UART01x_FR 0x18 /* Flag register (Read only). */ |
| #define UART010_IIR 0x1C /* Interrupt indentification register (Read). */ |
| #define UART010_ICR 0x1C /* Interrupt clear register (Write). */ |
| #define ST_UART011_LCRH_RX 0x1C /* Rx line control register. */ |
| #define UART01x_ILPR 0x20 /* IrDA low power counter register. */ |
| #define UART011_IBRD 0x24 /* Integer baud rate divisor register. */ |
| #define UART011_FBRD 0x28 /* Fractional baud rate divisor register. */ |
| #define UART011_LCRH 0x2c /* Line control register. */ |
| #define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */ |
| #define UART011_CR 0x30 /* Control register. */ |
| #define UART011_IFLS 0x34 /* Interrupt fifo level select. */ |
| #define UART011_IMSC 0x38 /* Interrupt mask. */ |
| #define UART011_RIS 0x3c /* Raw interrupt status. */ |
| #define UART011_MIS 0x40 /* Masked interrupt status. */ |
| #define UART011_ICR 0x44 /* Interrupt clear register. */ |
| #define UART011_DMACR 0x48 /* DMA control register. */ |
| #define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */ |
| #define ST_UART011_XON1 0x54 /* XON1 register. */ |
| #define ST_UART011_XON2 0x58 /* XON2 register. */ |
| #define ST_UART011_XOFF1 0x5C /* XON1 register. */ |
| #define ST_UART011_XOFF2 0x60 /* XON2 register. */ |
| #define ST_UART011_ITCR 0x80 /* Integration test control register. */ |
| #define ST_UART011_ITIP 0x84 /* Integration test input register. */ |
| #define ST_UART011_ABCR 0x100 /* Autobaud control register. */ |
| #define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */ |
| |
| #define UART011_DR_OE (1 << 11) |
| #define UART011_DR_BE (1 << 10) |
| #define UART011_DR_PE (1 << 9) |
| #define UART011_DR_FE (1 << 8) |
| |
| #define UART01x_RSR_OE 0x08 |
| #define UART01x_RSR_BE 0x04 |
| #define UART01x_RSR_PE 0x02 |
| #define UART01x_RSR_FE 0x01 |
| |
| #define UART011_FR_RI 0x100 |
| #define UART011_FR_TXFE 0x080 |
| #define UART011_FR_RXFF 0x040 |
| #define UART01x_FR_TXFF 0x020 |
| #define UART01x_FR_RXFE 0x010 |
| #define UART01x_FR_BUSY 0x008 |
| #define UART01x_FR_DCD 0x004 |
| #define UART01x_FR_DSR 0x002 |
| #define UART01x_FR_CTS 0x001 |
| #define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) |
| |
| #define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ |
| #define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */ |
| #define UART011_CR_OUT2 0x2000 /* OUT2 */ |
| #define UART011_CR_OUT1 0x1000 /* OUT1 */ |
| #define UART011_CR_RTS 0x0800 /* RTS */ |
| #define UART011_CR_DTR 0x0400 /* DTR */ |
| #define UART011_CR_RXE 0x0200 /* receive enable */ |
| #define UART011_CR_TXE 0x0100 /* transmit enable */ |
| #define UART011_CR_LBE 0x0080 /* loopback enable */ |
| #define UART010_CR_RTIE 0x0040 |
| #define UART010_CR_TIE 0x0020 |
| #define UART010_CR_RIE 0x0010 |
| #define UART010_CR_MSIE 0x0008 |
| #define ST_UART011_CR_OVSFACT 0x0008 /* Oversampling factor */ |
| #define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */ |
| #define UART01x_CR_SIREN 0x0002 /* SIR enable */ |
| #define UART01x_CR_UARTEN 0x0001 /* UART enable */ |
| |
| #define UART011_LCRH_SPS 0x80 |
| #define UART01x_LCRH_WLEN_8 0x60 |
| #define UART01x_LCRH_WLEN_7 0x40 |
| #define UART01x_LCRH_WLEN_6 0x20 |
| #define UART01x_LCRH_WLEN_5 0x00 |
| #define UART01x_LCRH_FEN 0x10 |
| #define UART01x_LCRH_STP2 0x08 |
| #define UART01x_LCRH_EPS 0x04 |
| #define UART01x_LCRH_PEN 0x02 |
| #define UART01x_LCRH_BRK 0x01 |
| |
| #define ST_UART011_DMAWM_RX_1 (0 << 3) |
| #define ST_UART011_DMAWM_RX_2 (1 << 3) |
| #define ST_UART011_DMAWM_RX_4 (2 << 3) |
| #define ST_UART011_DMAWM_RX_8 (3 << 3) |
| #define ST_UART011_DMAWM_RX_16 (4 << 3) |
| #define ST_UART011_DMAWM_RX_32 (5 << 3) |
| #define ST_UART011_DMAWM_RX_48 (6 << 3) |
| #define ST_UART011_DMAWM_TX_1 0 |
| #define ST_UART011_DMAWM_TX_2 1 |
| #define ST_UART011_DMAWM_TX_4 2 |
| #define ST_UART011_DMAWM_TX_8 3 |
| #define ST_UART011_DMAWM_TX_16 4 |
| #define ST_UART011_DMAWM_TX_32 5 |
| #define ST_UART011_DMAWM_TX_48 6 |
| |
| #define UART010_IIR_RTIS 0x08 |
| #define UART010_IIR_TIS 0x04 |
| #define UART010_IIR_RIS 0x02 |
| #define UART010_IIR_MIS 0x01 |
| |
| #define UART011_IFLS_RX1_8 (0 << 3) |
| #define UART011_IFLS_RX2_8 (1 << 3) |
| #define UART011_IFLS_RX4_8 (2 << 3) |
| #define UART011_IFLS_RX6_8 (3 << 3) |
| #define UART011_IFLS_RX7_8 (4 << 3) |
| #define UART011_IFLS_TX1_8 (0 << 0) |
| #define UART011_IFLS_TX2_8 (1 << 0) |
| #define UART011_IFLS_TX4_8 (2 << 0) |
| #define UART011_IFLS_TX6_8 (3 << 0) |
| #define UART011_IFLS_TX7_8 (4 << 0) |
| /* special values for ST vendor with deeper fifo */ |
| #define UART011_IFLS_RX_HALF (5 << 3) |
| #define UART011_IFLS_TX_HALF (5 << 0) |
| |
| #define UART011_OEIM (1 << 10) /* overrun error interrupt mask */ |
| #define UART011_BEIM (1 << 9) /* break error interrupt mask */ |
| #define UART011_PEIM (1 << 8) /* parity error interrupt mask */ |
| #define UART011_FEIM (1 << 7) /* framing error interrupt mask */ |
| #define UART011_RTIM (1 << 6) /* receive timeout interrupt mask */ |
| #define UART011_TXIM (1 << 5) /* transmit interrupt mask */ |
| #define UART011_RXIM (1 << 4) /* receive interrupt mask */ |
| #define UART011_DSRMIM (1 << 3) /* DSR interrupt mask */ |
| #define UART011_DCDMIM (1 << 2) /* DCD interrupt mask */ |
| #define UART011_CTSMIM (1 << 1) /* CTS interrupt mask */ |
| #define UART011_RIMIM (1 << 0) /* RI interrupt mask */ |
| |
| #define UART011_OEIS (1 << 10) /* overrun error interrupt status */ |
| #define UART011_BEIS (1 << 9) /* break error interrupt status */ |
| #define UART011_PEIS (1 << 8) /* parity error interrupt status */ |
| #define UART011_FEIS (1 << 7) /* framing error interrupt status */ |
| #define UART011_RTIS (1 << 6) /* receive timeout interrupt status */ |
| #define UART011_TXIS (1 << 5) /* transmit interrupt status */ |
| #define UART011_RXIS (1 << 4) /* receive interrupt status */ |
| #define UART011_DSRMIS (1 << 3) /* DSR interrupt status */ |
| #define UART011_DCDMIS (1 << 2) /* DCD interrupt status */ |
| #define UART011_CTSMIS (1 << 1) /* CTS interrupt status */ |
| #define UART011_RIMIS (1 << 0) /* RI interrupt status */ |
| |
| #define UART011_OEIC (1 << 10) /* overrun error interrupt clear */ |
| #define UART011_BEIC (1 << 9) /* break error interrupt clear */ |
| #define UART011_PEIC (1 << 8) /* parity error interrupt clear */ |
| #define UART011_FEIC (1 << 7) /* framing error interrupt clear */ |
| #define UART011_RTIC (1 << 6) /* receive timeout interrupt clear */ |
| #define UART011_TXIC (1 << 5) /* transmit interrupt clear */ |
| #define UART011_RXIC (1 << 4) /* receive interrupt clear */ |
| #define UART011_DSRMIC (1 << 3) /* DSR interrupt clear */ |
| #define UART011_DCDMIC (1 << 2) /* DCD interrupt clear */ |
| #define UART011_CTSMIC (1 << 1) /* CTS interrupt clear */ |
| #define UART011_RIMIC (1 << 0) /* RI interrupt clear */ |
| |
| #define UART011_DMAONERR (1 << 2) /* disable dma on error */ |
| #define UART011_TXDMAE (1 << 1) /* enable transmit dma */ |
| #define UART011_RXDMAE (1 << 0) /* enable receive dma */ |
| |
| #define UART01x_RSR_ANY (UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE) |
| #define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS) |
| |
| #ifndef __ASSEMBLY__ |
| struct amba_device; /* in uncompress this is included but amba/bus.h is not */ |
| struct amba_pl010_data { |
| void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl); |
| }; |
| |
| struct dma_chan; |
| struct amba_pl011_data { |
| bool (*dma_filter)(struct dma_chan *chan, void *filter_param); |
| void *dma_rx_param; |
| void *dma_tx_param; |
| void (*init) (void); |
| void (*exit) (void); |
| }; |
| #endif |
| |
| #endif |