| /* |
| * Copyright (C) 2014 Hauke Mehrtens <hauke@hauke-m.de> |
| * Copyright (C) 2015 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/msi.h> |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/mbus.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/of_address.h> |
| #include <linux/of_pci.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| #include <linux/phy/phy.h> |
| |
| #include "pcie-iproc.h" |
| |
| #define EP_PERST_SOURCE_SELECT_SHIFT 2 |
| #define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT) |
| #define EP_MODE_SURVIVE_PERST_SHIFT 1 |
| #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT) |
| #define RC_PCIE_RST_OUTPUT_SHIFT 0 |
| #define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT) |
| #define PAXC_RESET_MASK 0x7f |
| |
| #define CFG_IND_ADDR_MASK 0x00001ffc |
| |
| #define CFG_ADDR_BUS_NUM_SHIFT 20 |
| #define CFG_ADDR_BUS_NUM_MASK 0x0ff00000 |
| #define CFG_ADDR_DEV_NUM_SHIFT 15 |
| #define CFG_ADDR_DEV_NUM_MASK 0x000f8000 |
| #define CFG_ADDR_FUNC_NUM_SHIFT 12 |
| #define CFG_ADDR_FUNC_NUM_MASK 0x00007000 |
| #define CFG_ADDR_REG_NUM_SHIFT 2 |
| #define CFG_ADDR_REG_NUM_MASK 0x00000ffc |
| #define CFG_ADDR_CFG_TYPE_SHIFT 0 |
| #define CFG_ADDR_CFG_TYPE_MASK 0x00000003 |
| |
| #define SYS_RC_INTX_MASK 0xf |
| |
| #define PCIE_PHYLINKUP_SHIFT 3 |
| #define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT) |
| #define PCIE_DL_ACTIVE_SHIFT 2 |
| #define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT) |
| |
| #define OARR_VALID_SHIFT 0 |
| #define OARR_VALID BIT(OARR_VALID_SHIFT) |
| #define OARR_SIZE_CFG_SHIFT 1 |
| #define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT) |
| |
| #define PCI_EXP_CAP 0xac |
| |
| #define MAX_NUM_OB_WINDOWS 2 |
| |
| #define IPROC_PCIE_REG_INVALID 0xffff |
| |
| enum iproc_pcie_reg { |
| IPROC_PCIE_CLK_CTRL = 0, |
| IPROC_PCIE_CFG_IND_ADDR, |
| IPROC_PCIE_CFG_IND_DATA, |
| IPROC_PCIE_CFG_ADDR, |
| IPROC_PCIE_CFG_DATA, |
| IPROC_PCIE_INTX_EN, |
| IPROC_PCIE_OARR_LO, |
| IPROC_PCIE_OARR_HI, |
| IPROC_PCIE_OMAP_LO, |
| IPROC_PCIE_OMAP_HI, |
| IPROC_PCIE_LINK_STATUS, |
| }; |
| |
| /* iProc PCIe PAXB registers */ |
| static const u16 iproc_pcie_reg_paxb[] = { |
| [IPROC_PCIE_CLK_CTRL] = 0x000, |
| [IPROC_PCIE_CFG_IND_ADDR] = 0x120, |
| [IPROC_PCIE_CFG_IND_DATA] = 0x124, |
| [IPROC_PCIE_CFG_ADDR] = 0x1f8, |
| [IPROC_PCIE_CFG_DATA] = 0x1fc, |
| [IPROC_PCIE_INTX_EN] = 0x330, |
| [IPROC_PCIE_OARR_LO] = 0xd20, |
| [IPROC_PCIE_OARR_HI] = 0xd24, |
| [IPROC_PCIE_OMAP_LO] = 0xd40, |
| [IPROC_PCIE_OMAP_HI] = 0xd44, |
| [IPROC_PCIE_LINK_STATUS] = 0xf0c, |
| }; |
| |
| /* iProc PCIe PAXC v1 registers */ |
| static const u16 iproc_pcie_reg_paxc[] = { |
| [IPROC_PCIE_CLK_CTRL] = 0x000, |
| [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0, |
| [IPROC_PCIE_CFG_IND_DATA] = 0x1f4, |
| [IPROC_PCIE_CFG_ADDR] = 0x1f8, |
| [IPROC_PCIE_CFG_DATA] = 0x1fc, |
| [IPROC_PCIE_INTX_EN] = IPROC_PCIE_REG_INVALID, |
| [IPROC_PCIE_OARR_LO] = IPROC_PCIE_REG_INVALID, |
| [IPROC_PCIE_OARR_HI] = IPROC_PCIE_REG_INVALID, |
| [IPROC_PCIE_OMAP_LO] = IPROC_PCIE_REG_INVALID, |
| [IPROC_PCIE_OMAP_HI] = IPROC_PCIE_REG_INVALID, |
| [IPROC_PCIE_LINK_STATUS] = IPROC_PCIE_REG_INVALID, |
| }; |
| |
| static inline struct iproc_pcie *iproc_data(struct pci_bus *bus) |
| { |
| struct iproc_pcie *pcie; |
| #ifdef CONFIG_ARM |
| struct pci_sys_data *sys = bus->sysdata; |
| |
| pcie = sys->private_data; |
| #else |
| pcie = bus->sysdata; |
| #endif |
| return pcie; |
| } |
| |
| static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset) |
| { |
| return !!(reg_offset == IPROC_PCIE_REG_INVALID); |
| } |
| |
| static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie, |
| enum iproc_pcie_reg reg) |
| { |
| return pcie->reg_offsets[reg]; |
| } |
| |
| static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie, |
| enum iproc_pcie_reg reg) |
| { |
| u16 offset = iproc_pcie_reg_offset(pcie, reg); |
| |
| if (iproc_pcie_reg_is_invalid(offset)) |
| return 0; |
| |
| return readl(pcie->base + offset); |
| } |
| |
| static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie, |
| enum iproc_pcie_reg reg, u32 val) |
| { |
| u16 offset = iproc_pcie_reg_offset(pcie, reg); |
| |
| if (iproc_pcie_reg_is_invalid(offset)) |
| return; |
| |
| writel(val, pcie->base + offset); |
| } |
| |
| static inline void iproc_pcie_ob_write(struct iproc_pcie *pcie, |
| enum iproc_pcie_reg reg, |
| unsigned window, u32 val) |
| { |
| u16 offset = iproc_pcie_reg_offset(pcie, reg); |
| |
| if (iproc_pcie_reg_is_invalid(offset)) |
| return; |
| |
| writel(val, pcie->base + offset + (window * 8)); |
| } |
| |
| /** |
| * Note access to the configuration registers are protected at the higher layer |
| * by 'pci_lock' in drivers/pci/access.c |
| */ |
| static void __iomem *iproc_pcie_map_cfg_bus(struct pci_bus *bus, |
| unsigned int devfn, |
| int where) |
| { |
| struct iproc_pcie *pcie = iproc_data(bus); |
| unsigned slot = PCI_SLOT(devfn); |
| unsigned fn = PCI_FUNC(devfn); |
| unsigned busno = bus->number; |
| u32 val; |
| u16 offset; |
| |
| /* root complex access */ |
| if (busno == 0) { |
| if (slot > 0 || fn > 0) |
| return NULL; |
| |
| iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR, |
| where & CFG_IND_ADDR_MASK); |
| offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA); |
| if (iproc_pcie_reg_is_invalid(offset)) |
| return NULL; |
| else |
| return (pcie->base + offset); |
| } |
| |
| /* |
| * PAXC is connected to an internally emulated EP within the SoC. It |
| * allows only one device. |
| */ |
| if (pcie->type == IPROC_PCIE_PAXC) |
| if (slot > 0) |
| return NULL; |
| |
| /* EP device access */ |
| val = (busno << CFG_ADDR_BUS_NUM_SHIFT) | |
| (slot << CFG_ADDR_DEV_NUM_SHIFT) | |
| (fn << CFG_ADDR_FUNC_NUM_SHIFT) | |
| (where & CFG_ADDR_REG_NUM_MASK) | |
| (1 & CFG_ADDR_CFG_TYPE_MASK); |
| iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val); |
| offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA); |
| if (iproc_pcie_reg_is_invalid(offset)) |
| return NULL; |
| else |
| return (pcie->base + offset); |
| } |
| |
| static struct pci_ops iproc_pcie_ops = { |
| .map_bus = iproc_pcie_map_cfg_bus, |
| .read = pci_generic_config_read32, |
| .write = pci_generic_config_write32, |
| }; |
| |
| static void iproc_pcie_reset(struct iproc_pcie *pcie) |
| { |
| u32 val; |
| |
| if (pcie->type == IPROC_PCIE_PAXC) { |
| val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL); |
| val &= ~PAXC_RESET_MASK; |
| iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); |
| udelay(100); |
| val |= PAXC_RESET_MASK; |
| iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); |
| udelay(100); |
| return; |
| } |
| |
| /* |
| * Select perst_b signal as reset source. Put the device into reset, |
| * and then bring it out of reset |
| */ |
| val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL); |
| val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST & |
| ~RC_PCIE_RST_OUTPUT; |
| iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); |
| udelay(250); |
| |
| val |= RC_PCIE_RST_OUTPUT; |
| iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); |
| msleep(100); |
| } |
| |
| static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus) |
| { |
| struct device *dev = pcie->dev; |
| u8 hdr_type; |
| u32 link_ctrl, class, val; |
| u16 pos = PCI_EXP_CAP, link_status; |
| bool link_is_active = false; |
| |
| /* |
| * PAXC connects to emulated endpoint devices directly and does not |
| * have a Serdes. Therefore skip the link detection logic here. |
| */ |
| if (pcie->type == IPROC_PCIE_PAXC) |
| return 0; |
| |
| val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS); |
| if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) { |
| dev_err(dev, "PHY or data link is INACTIVE!\n"); |
| return -ENODEV; |
| } |
| |
| /* make sure we are not in EP mode */ |
| pci_bus_read_config_byte(bus, 0, PCI_HEADER_TYPE, &hdr_type); |
| if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) { |
| dev_err(dev, "in EP mode, hdr=%#02x\n", hdr_type); |
| return -EFAULT; |
| } |
| |
| /* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */ |
| #define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c |
| #define PCI_CLASS_BRIDGE_MASK 0xffff00 |
| #define PCI_CLASS_BRIDGE_SHIFT 8 |
| pci_bus_read_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, &class); |
| class &= ~PCI_CLASS_BRIDGE_MASK; |
| class |= (PCI_CLASS_BRIDGE_PCI << PCI_CLASS_BRIDGE_SHIFT); |
| pci_bus_write_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, class); |
| |
| /* check link status to see if link is active */ |
| pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, &link_status); |
| if (link_status & PCI_EXP_LNKSTA_NLW) |
| link_is_active = true; |
| |
| if (!link_is_active) { |
| /* try GEN 1 link speed */ |
| #define PCI_TARGET_LINK_SPEED_MASK 0xf |
| #define PCI_TARGET_LINK_SPEED_GEN2 0x2 |
| #define PCI_TARGET_LINK_SPEED_GEN1 0x1 |
| pci_bus_read_config_dword(bus, 0, |
| pos + PCI_EXP_LNKCTL2, |
| &link_ctrl); |
| if ((link_ctrl & PCI_TARGET_LINK_SPEED_MASK) == |
| PCI_TARGET_LINK_SPEED_GEN2) { |
| link_ctrl &= ~PCI_TARGET_LINK_SPEED_MASK; |
| link_ctrl |= PCI_TARGET_LINK_SPEED_GEN1; |
| pci_bus_write_config_dword(bus, 0, |
| pos + PCI_EXP_LNKCTL2, |
| link_ctrl); |
| msleep(100); |
| |
| pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, |
| &link_status); |
| if (link_status & PCI_EXP_LNKSTA_NLW) |
| link_is_active = true; |
| } |
| } |
| |
| dev_info(dev, "link: %s\n", link_is_active ? "UP" : "DOWN"); |
| |
| return link_is_active ? 0 : -ENODEV; |
| } |
| |
| static void iproc_pcie_enable(struct iproc_pcie *pcie) |
| { |
| iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK); |
| } |
| |
| /** |
| * Some iProc SoCs require the SW to configure the outbound address mapping |
| * |
| * Outbound address translation: |
| * |
| * iproc_pcie_address = axi_address - axi_offset |
| * OARR = iproc_pcie_address |
| * OMAP = pci_addr |
| * |
| * axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address |
| */ |
| static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr, |
| u64 pci_addr, resource_size_t size) |
| { |
| struct iproc_pcie_ob *ob = &pcie->ob; |
| struct device *dev = pcie->dev; |
| unsigned i; |
| u64 max_size = (u64)ob->window_size * MAX_NUM_OB_WINDOWS; |
| u64 remainder; |
| |
| if (size > max_size) { |
| dev_err(dev, |
| "res size %pap exceeds max supported size 0x%llx\n", |
| &size, max_size); |
| return -EINVAL; |
| } |
| |
| div64_u64_rem(size, ob->window_size, &remainder); |
| if (remainder) { |
| dev_err(dev, |
| "res size %pap needs to be multiple of window size %pap\n", |
| &size, &ob->window_size); |
| return -EINVAL; |
| } |
| |
| if (axi_addr < ob->axi_offset) { |
| dev_err(dev, "axi address %pap less than offset %pap\n", |
| &axi_addr, &ob->axi_offset); |
| return -EINVAL; |
| } |
| |
| /* |
| * Translate the AXI address to the internal address used by the iProc |
| * PCIe core before programming the OARR |
| */ |
| axi_addr -= ob->axi_offset; |
| |
| for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) { |
| iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_LO, i, |
| lower_32_bits(axi_addr) | OARR_VALID | |
| (ob->set_oarr_size ? 1 : 0)); |
| iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_HI, i, |
| upper_32_bits(axi_addr)); |
| iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_LO, i, |
| lower_32_bits(pci_addr)); |
| iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_HI, i, |
| upper_32_bits(pci_addr)); |
| |
| size -= ob->window_size; |
| if (size == 0) |
| break; |
| |
| axi_addr += ob->window_size; |
| pci_addr += ob->window_size; |
| } |
| |
| return 0; |
| } |
| |
| static int iproc_pcie_map_ranges(struct iproc_pcie *pcie, |
| struct list_head *resources) |
| { |
| struct device *dev = pcie->dev; |
| struct resource_entry *window; |
| int ret; |
| |
| resource_list_for_each_entry(window, resources) { |
| struct resource *res = window->res; |
| u64 res_type = resource_type(res); |
| |
| switch (res_type) { |
| case IORESOURCE_IO: |
| case IORESOURCE_BUS: |
| break; |
| case IORESOURCE_MEM: |
| ret = iproc_pcie_setup_ob(pcie, res->start, |
| res->start - window->offset, |
| resource_size(res)); |
| if (ret) |
| return ret; |
| break; |
| default: |
| dev_err(dev, "invalid resource %pR\n", res); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int iproc_pcie_msi_enable(struct iproc_pcie *pcie) |
| { |
| struct device_node *msi_node; |
| |
| msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0); |
| if (!msi_node) |
| return -ENODEV; |
| |
| /* |
| * If another MSI controller is being used, the call below should fail |
| * but that is okay |
| */ |
| return iproc_msi_init(pcie, msi_node); |
| } |
| |
| static void iproc_pcie_msi_disable(struct iproc_pcie *pcie) |
| { |
| iproc_msi_exit(pcie); |
| } |
| |
| int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res) |
| { |
| struct device *dev; |
| int ret; |
| void *sysdata; |
| struct pci_bus *bus; |
| |
| dev = pcie->dev; |
| ret = devm_request_pci_bus_resources(dev, res); |
| if (ret) |
| return ret; |
| |
| ret = phy_init(pcie->phy); |
| if (ret) { |
| dev_err(dev, "unable to initialize PCIe PHY\n"); |
| return ret; |
| } |
| |
| ret = phy_power_on(pcie->phy); |
| if (ret) { |
| dev_err(dev, "unable to power on PCIe PHY\n"); |
| goto err_exit_phy; |
| } |
| |
| switch (pcie->type) { |
| case IPROC_PCIE_PAXB: |
| pcie->reg_offsets = iproc_pcie_reg_paxb; |
| break; |
| case IPROC_PCIE_PAXC: |
| pcie->reg_offsets = iproc_pcie_reg_paxc; |
| break; |
| default: |
| dev_err(dev, "incompatible iProc PCIe interface\n"); |
| ret = -EINVAL; |
| goto err_power_off_phy; |
| } |
| |
| iproc_pcie_reset(pcie); |
| |
| if (pcie->need_ob_cfg) { |
| ret = iproc_pcie_map_ranges(pcie, res); |
| if (ret) { |
| dev_err(dev, "map failed\n"); |
| goto err_power_off_phy; |
| } |
| } |
| |
| #ifdef CONFIG_ARM |
| pcie->sysdata.private_data = pcie; |
| sysdata = &pcie->sysdata; |
| #else |
| sysdata = pcie; |
| #endif |
| |
| bus = pci_create_root_bus(dev, 0, &iproc_pcie_ops, sysdata, res); |
| if (!bus) { |
| dev_err(dev, "unable to create PCI root bus\n"); |
| ret = -ENOMEM; |
| goto err_power_off_phy; |
| } |
| pcie->root_bus = bus; |
| |
| ret = iproc_pcie_check_link(pcie, bus); |
| if (ret) { |
| dev_err(dev, "no PCIe EP device detected\n"); |
| goto err_rm_root_bus; |
| } |
| |
| iproc_pcie_enable(pcie); |
| |
| if (IS_ENABLED(CONFIG_PCI_MSI)) |
| if (iproc_pcie_msi_enable(pcie)) |
| dev_info(dev, "not using iProc MSI\n"); |
| |
| pci_scan_child_bus(bus); |
| pci_assign_unassigned_bus_resources(bus); |
| pci_fixup_irqs(pci_common_swizzle, pcie->map_irq); |
| pci_bus_add_devices(bus); |
| |
| return 0; |
| |
| err_rm_root_bus: |
| pci_stop_root_bus(bus); |
| pci_remove_root_bus(bus); |
| |
| err_power_off_phy: |
| phy_power_off(pcie->phy); |
| err_exit_phy: |
| phy_exit(pcie->phy); |
| return ret; |
| } |
| EXPORT_SYMBOL(iproc_pcie_setup); |
| |
| int iproc_pcie_remove(struct iproc_pcie *pcie) |
| { |
| pci_stop_root_bus(pcie->root_bus); |
| pci_remove_root_bus(pcie->root_bus); |
| |
| iproc_pcie_msi_disable(pcie); |
| |
| phy_power_off(pcie->phy); |
| phy_exit(pcie->phy); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(iproc_pcie_remove); |
| |
| MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); |
| MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver"); |
| MODULE_LICENSE("GPL v2"); |