diff --git a/drivers/acpi/parser/psloop.c b/drivers/acpi/parser/psloop.c
new file mode 100644
index 0000000..decb2e9
--- /dev/null
+++ b/drivers/acpi/parser/psloop.c
@@ -0,0 +1,775 @@
+/******************************************************************************
+ *
+ * Module Name: psloop - Main AML parse loop
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+/*
+ * Parse the AML and build an operation tree as most interpreters,
+ * like Perl, do.  Parsing is done by hand rather than with a YACC
+ * generated parser to tightly constrain stack and dynamic memory
+ * usage.  At the same time, parsing is kept flexible and the code
+ * fairly compact by parsing based on a list of AML opcode
+ * templates in aml_op_info[]
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/acdispat.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acinterp.h>
+
+#define _COMPONENT          ACPI_PARSER
+	 ACPI_MODULE_NAME    ("psloop")
+
+static u32                          acpi_gbl_depth = 0;
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_parse_loop
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Parse AML (pointed to by the current parser state) and return
+ *              a tree of ops.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ps_parse_loop (
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status = AE_OK;
+	acpi_status                     status2;
+	union acpi_parse_object         *op = NULL;     /* current op */
+	union acpi_parse_object         *arg = NULL;
+	union acpi_parse_object         *pre_op = NULL;
+	struct acpi_parse_state         *parser_state;
+	u8                              *aml_op_start = NULL;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ps_parse_loop", walk_state);
+
+	if (walk_state->descending_callback == NULL) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	parser_state = &walk_state->parser_state;
+	walk_state->arg_types = 0;
+
+#if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY))
+
+	if (walk_state->walk_type & ACPI_WALK_METHOD_RESTART) {
+		/* We are restarting a preempted control method */
+
+		if (acpi_ps_has_completed_scope (parser_state)) {
+			/*
+			 * We must check if a predicate to an IF or WHILE statement
+			 * was just completed
+			 */
+			if ((parser_state->scope->parse_scope.op) &&
+			   ((parser_state->scope->parse_scope.op->common.aml_opcode == AML_IF_OP) ||
+				(parser_state->scope->parse_scope.op->common.aml_opcode == AML_WHILE_OP)) &&
+				(walk_state->control_state) &&
+				(walk_state->control_state->common.state ==
+					ACPI_CONTROL_PREDICATE_EXECUTING)) {
+				/*
+				 * A predicate was just completed, get the value of the
+				 * predicate and branch based on that value
+				 */
+				walk_state->op = NULL;
+				status = acpi_ds_get_predicate_value (walk_state, ACPI_TO_POINTER (TRUE));
+				if (ACPI_FAILURE (status) &&
+					((status & AE_CODE_MASK) != AE_CODE_CONTROL)) {
+					if (status == AE_AML_NO_RETURN_VALUE) {
+						ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+							"Invoked method did not return a value, %s\n",
+							acpi_format_exception (status)));
+
+					}
+					ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+						"get_predicate Failed, %s\n",
+						acpi_format_exception (status)));
+					return_ACPI_STATUS (status);
+				}
+
+				status = acpi_ps_next_parse_state (walk_state, op, status);
+			}
+
+			acpi_ps_pop_scope (parser_state, &op,
+				&walk_state->arg_types, &walk_state->arg_count);
+			ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Popped scope, Op=%p\n", op));
+		}
+		else if (walk_state->prev_op) {
+			/* We were in the middle of an op */
+
+			op = walk_state->prev_op;
+			walk_state->arg_types = walk_state->prev_arg_types;
+		}
+	}
+#endif
+
+	/* Iterative parsing loop, while there is more AML to process: */
+
+	while ((parser_state->aml < parser_state->aml_end) || (op)) {
+		aml_op_start = parser_state->aml;
+		if (!op) {
+			/* Get the next opcode from the AML stream */
+
+			walk_state->aml_offset = (u32) ACPI_PTR_DIFF (parser_state->aml,
+					  parser_state->aml_start);
+			walk_state->opcode   = acpi_ps_peek_opcode (parser_state);
+
+			/*
+			 * First cut to determine what we have found:
+			 * 1) A valid AML opcode
+			 * 2) A name string
+			 * 3) An unknown/invalid opcode
+			 */
+			walk_state->op_info = acpi_ps_get_opcode_info (walk_state->opcode);
+			switch (walk_state->op_info->class) {
+			case AML_CLASS_ASCII:
+			case AML_CLASS_PREFIX:
+				/*
+				 * Starts with a valid prefix or ASCII char, this is a name
+				 * string.  Convert the bare name string to a namepath.
+				 */
+				walk_state->opcode = AML_INT_NAMEPATH_OP;
+				walk_state->arg_types = ARGP_NAMESTRING;
+				break;
+
+			case AML_CLASS_UNKNOWN:
+
+				/* The opcode is unrecognized.  Just skip unknown opcodes */
+
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Found unknown opcode %X at AML address %p offset %X, ignoring\n",
+					walk_state->opcode, parser_state->aml, walk_state->aml_offset));
+
+				ACPI_DUMP_BUFFER (parser_state->aml, 128);
+
+				/* Assume one-byte bad opcode */
+
+				parser_state->aml++;
+				continue;
+
+			default:
+
+				/* Found opcode info, this is a normal opcode */
+
+				parser_state->aml += acpi_ps_get_opcode_size (walk_state->opcode);
+				walk_state->arg_types = walk_state->op_info->parse_args;
+				break;
+			}
+
+			/* Create Op structure and append to parent's argument list */
+
+			if (walk_state->op_info->flags & AML_NAMED) {
+				/* Allocate a new pre_op if necessary */
+
+				if (!pre_op) {
+					pre_op = acpi_ps_alloc_op (walk_state->opcode);
+					if (!pre_op) {
+						status = AE_NO_MEMORY;
+						goto close_this_op;
+					}
+				}
+
+				pre_op->common.value.arg = NULL;
+				pre_op->common.aml_opcode = walk_state->opcode;
+
+				/*
+				 * Get and append arguments until we find the node that contains
+				 * the name (the type ARGP_NAME).
+				 */
+				while (GET_CURRENT_ARG_TYPE (walk_state->arg_types) &&
+					  (GET_CURRENT_ARG_TYPE (walk_state->arg_types) != ARGP_NAME)) {
+					status = acpi_ps_get_next_arg (walk_state, parser_state,
+							 GET_CURRENT_ARG_TYPE (walk_state->arg_types), &arg);
+					if (ACPI_FAILURE (status)) {
+						goto close_this_op;
+					}
+
+					acpi_ps_append_arg (pre_op, arg);
+					INCREMENT_ARG_LIST (walk_state->arg_types);
+				}
+
+				/*
+				 * Make sure that we found a NAME and didn't run out of
+				 * arguments
+				 */
+				if (!GET_CURRENT_ARG_TYPE (walk_state->arg_types)) {
+					status = AE_AML_NO_OPERAND;
+					goto close_this_op;
+				}
+
+				/* We know that this arg is a name, move to next arg */
+
+				INCREMENT_ARG_LIST (walk_state->arg_types);
+
+				/*
+				 * Find the object.  This will either insert the object into
+				 * the namespace or simply look it up
+				 */
+				walk_state->op = NULL;
+
+				status = walk_state->descending_callback (walk_state, &op);
+				if (ACPI_FAILURE (status)) {
+					ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+						"During name lookup/catalog, %s\n",
+						acpi_format_exception (status)));
+					goto close_this_op;
+				}
+
+				if (!op) {
+					continue;
+				}
+
+				status = acpi_ps_next_parse_state (walk_state, op, status);
+				if (status == AE_CTRL_PENDING) {
+					status = AE_OK;
+					goto close_this_op;
+				}
+
+				if (ACPI_FAILURE (status)) {
+					goto close_this_op;
+				}
+
+				acpi_ps_append_arg (op, pre_op->common.value.arg);
+				acpi_gbl_depth++;
+
+				if (op->common.aml_opcode == AML_REGION_OP) {
+					/*
+					 * Defer final parsing of an operation_region body,
+					 * because we don't have enough info in the first pass
+					 * to parse it correctly (i.e., there may be method
+					 * calls within the term_arg elements of the body.)
+					 *
+					 * However, we must continue parsing because
+					 * the opregion is not a standalone package --
+					 * we don't know where the end is at this point.
+					 *
+					 * (Length is unknown until parse of the body complete)
+					 */
+					op->named.data    = aml_op_start;
+					op->named.length  = 0;
+				}
+			}
+			else {
+				/* Not a named opcode, just allocate Op and append to parent */
+
+				walk_state->op_info = acpi_ps_get_opcode_info (walk_state->opcode);
+				op = acpi_ps_alloc_op (walk_state->opcode);
+				if (!op) {
+					status = AE_NO_MEMORY;
+					goto close_this_op;
+				}
+
+				if (walk_state->op_info->flags & AML_CREATE) {
+					/*
+					 * Backup to beginning of create_xXXfield declaration
+					 * body_length is unknown until we parse the body
+					 */
+					op->named.data    = aml_op_start;
+					op->named.length  = 0;
+				}
+
+				acpi_ps_append_arg (acpi_ps_get_parent_scope (parser_state), op);
+
+				if ((walk_state->descending_callback != NULL)) {
+					/*
+					 * Find the object. This will either insert the object into
+					 * the namespace or simply look it up
+					 */
+					walk_state->op = op;
+
+					status = walk_state->descending_callback (walk_state, &op);
+					status = acpi_ps_next_parse_state (walk_state, op, status);
+					if (status == AE_CTRL_PENDING) {
+						status = AE_OK;
+						goto close_this_op;
+					}
+
+					if (ACPI_FAILURE (status)) {
+						goto close_this_op;
+					}
+				}
+			}
+
+			op->common.aml_offset = walk_state->aml_offset;
+
+			if (walk_state->op_info) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
+					"Opcode %4.4X [%s] Op %p Aml %p aml_offset %5.5X\n",
+					 (u32) op->common.aml_opcode, walk_state->op_info->name,
+					 op, parser_state->aml, op->common.aml_offset));
+			}
+		}
+
+
+		/*
+		 * Start arg_count at zero because we don't know if there are
+		 * any args yet
+		 */
+		walk_state->arg_count = 0;
+
+		/* Are there any arguments that must be processed? */
+
+		if (walk_state->arg_types) {
+			/* Get arguments */
+
+			switch (op->common.aml_opcode) {
+			case AML_BYTE_OP:       /* AML_BYTEDATA_ARG */
+			case AML_WORD_OP:       /* AML_WORDDATA_ARG */
+			case AML_DWORD_OP:      /* AML_DWORDATA_ARG */
+			case AML_QWORD_OP:      /* AML_QWORDATA_ARG */
+			case AML_STRING_OP:     /* AML_ASCIICHARLIST_ARG */
+
+				/* Fill in constant or string argument directly */
+
+				acpi_ps_get_next_simple_arg (parser_state,
+					GET_CURRENT_ARG_TYPE (walk_state->arg_types), op);
+				break;
+
+			case AML_INT_NAMEPATH_OP:   /* AML_NAMESTRING_ARG */
+
+				status = acpi_ps_get_next_namepath (walk_state, parser_state, op, 1);
+				if (ACPI_FAILURE (status)) {
+					goto close_this_op;
+				}
+
+				walk_state->arg_types = 0;
+				break;
+
+			default:
+				/*
+				 * Op is not a constant or string, append each argument
+				 * to the Op
+				 */
+				while (GET_CURRENT_ARG_TYPE (walk_state->arg_types) &&
+						!walk_state->arg_count) {
+					walk_state->aml_offset = (u32)
+						ACPI_PTR_DIFF (parser_state->aml, parser_state->aml_start);
+
+					status = acpi_ps_get_next_arg (walk_state, parser_state,
+							 GET_CURRENT_ARG_TYPE (walk_state->arg_types),
+							 &arg);
+					if (ACPI_FAILURE (status)) {
+						goto close_this_op;
+					}
+
+					if (arg) {
+						arg->common.aml_offset = walk_state->aml_offset;
+						acpi_ps_append_arg (op, arg);
+					}
+					INCREMENT_ARG_LIST (walk_state->arg_types);
+				}
+
+				/* Special processing for certain opcodes */
+
+				if ((walk_state->pass_number <= ACPI_IMODE_LOAD_PASS1) &&
+				   ((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) == 0)) {
+					/*
+					 * We want to skip If/Else/While constructs during Pass1
+					 * because we want to actually conditionally execute the
+					 * code during Pass2.
+					 *
+					 * Except for disassembly, where we always want to
+					 * walk the If/Else/While packages
+					 */
+					switch (op->common.aml_opcode) {
+					case AML_IF_OP:
+					case AML_ELSE_OP:
+					case AML_WHILE_OP:
+
+						/* Skip body of if/else/while in pass 1 */
+
+						parser_state->aml   = parser_state->pkg_end;
+						walk_state->arg_count = 0;
+						break;
+
+					default:
+						break;
+					}
+				}
+
+				switch (op->common.aml_opcode) {
+				case AML_METHOD_OP:
+
+					/*
+					 * Skip parsing of control method
+					 * because we don't have enough info in the first pass
+					 * to parse it correctly.
+					 *
+					 * Save the length and address of the body
+					 */
+					op->named.data   = parser_state->aml;
+					op->named.length = (u32) (parser_state->pkg_end -
+							   parser_state->aml);
+
+					/* Skip body of method */
+
+					parser_state->aml   = parser_state->pkg_end;
+					walk_state->arg_count = 0;
+					break;
+
+				case AML_BUFFER_OP:
+				case AML_PACKAGE_OP:
+				case AML_VAR_PACKAGE_OP:
+
+					if ((op->common.parent) &&
+						(op->common.parent->common.aml_opcode == AML_NAME_OP) &&
+						(walk_state->pass_number <= ACPI_IMODE_LOAD_PASS2)) {
+						/*
+						 * Skip parsing of Buffers and Packages
+						 * because we don't have enough info in the first pass
+						 * to parse them correctly.
+						 */
+						op->named.data   = aml_op_start;
+						op->named.length = (u32) (parser_state->pkg_end -
+								   aml_op_start);
+
+						/* Skip body */
+
+						parser_state->aml   = parser_state->pkg_end;
+						walk_state->arg_count = 0;
+					}
+					break;
+
+				case AML_WHILE_OP:
+
+					if (walk_state->control_state) {
+						walk_state->control_state->control.package_end =
+							parser_state->pkg_end;
+					}
+					break;
+
+				default:
+
+					/* No action for all other opcodes */
+					break;
+				}
+				break;
+			}
+		}
+
+		/* Check for arguments that need to be processed */
+
+		if (walk_state->arg_count) {
+			/*
+			 * There are arguments (complex ones), push Op and
+			 * prepare for argument
+			 */
+			status = acpi_ps_push_scope (parser_state, op,
+					 walk_state->arg_types, walk_state->arg_count);
+			if (ACPI_FAILURE (status)) {
+				goto close_this_op;
+			}
+			op = NULL;
+			continue;
+		}
+
+		/*
+		 * All arguments have been processed -- Op is complete,
+		 * prepare for next
+		 */
+		walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode);
+		if (walk_state->op_info->flags & AML_NAMED) {
+			if (acpi_gbl_depth) {
+				acpi_gbl_depth--;
+			}
+
+			if (op->common.aml_opcode == AML_REGION_OP) {
+				/*
+				 * Skip parsing of control method or opregion body,
+				 * because we don't have enough info in the first pass
+				 * to parse them correctly.
+				 *
+				 * Completed parsing an op_region declaration, we now
+				 * know the length.
+				 */
+				op->named.length = (u32) (parser_state->aml - op->named.data);
+			}
+		}
+
+		if (walk_state->op_info->flags & AML_CREATE) {
+			/*
+			 * Backup to beginning of create_xXXfield declaration (1 for
+			 * Opcode)
+			 *
+			 * body_length is unknown until we parse the body
+			 */
+			op->named.length = (u32) (parser_state->aml - op->named.data);
+		}
+
+		/* This op complete, notify the dispatcher */
+
+		if (walk_state->ascending_callback != NULL) {
+			walk_state->op    = op;
+			walk_state->opcode = op->common.aml_opcode;
+
+			status = walk_state->ascending_callback (walk_state);
+			status = acpi_ps_next_parse_state (walk_state, op, status);
+			if (status == AE_CTRL_PENDING) {
+				status = AE_OK;
+				goto close_this_op;
+			}
+		}
+
+
+close_this_op:
+		/*
+		 * Finished one argument of the containing scope
+		 */
+		parser_state->scope->parse_scope.arg_count--;
+
+		/* Finished with pre_op */
+
+		if (pre_op) {
+			acpi_ps_free_op (pre_op);
+			pre_op = NULL;
+		}
+
+		/* Close this Op (will result in parse subtree deletion) */
+
+		status2 = acpi_ps_complete_this_op (walk_state, op);
+		if (ACPI_FAILURE (status2)) {
+			return_ACPI_STATUS (status2);
+		}
+		op = NULL;
+
+		switch (status) {
+		case AE_OK:
+			break;
+
+
+		case AE_CTRL_TRANSFER:
+
+			/* We are about to transfer to a called method. */
+
+			walk_state->prev_op = op;
+			walk_state->prev_arg_types = walk_state->arg_types;
+			return_ACPI_STATUS (status);
+
+
+		case AE_CTRL_END:
+
+			acpi_ps_pop_scope (parser_state, &op,
+				&walk_state->arg_types, &walk_state->arg_count);
+
+			if (op) {
+				walk_state->op    = op;
+				walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode);
+				walk_state->opcode = op->common.aml_opcode;
+
+				status = walk_state->ascending_callback (walk_state);
+				status = acpi_ps_next_parse_state (walk_state, op, status);
+
+				status2 = acpi_ps_complete_this_op (walk_state, op);
+				if (ACPI_FAILURE (status2)) {
+					return_ACPI_STATUS (status2);
+				}
+				op = NULL;
+			}
+			status = AE_OK;
+			break;
+
+
+		case AE_CTRL_BREAK:
+		case AE_CTRL_CONTINUE:
+
+			/* Pop off scopes until we find the While */
+
+			while (!op || (op->common.aml_opcode != AML_WHILE_OP)) {
+				acpi_ps_pop_scope (parser_state, &op,
+					&walk_state->arg_types, &walk_state->arg_count);
+			}
+
+			/* Close this iteration of the While loop */
+
+			walk_state->op    = op;
+			walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode);
+			walk_state->opcode = op->common.aml_opcode;
+
+			status = walk_state->ascending_callback (walk_state);
+			status = acpi_ps_next_parse_state (walk_state, op, status);
+
+			status2 = acpi_ps_complete_this_op (walk_state, op);
+			if (ACPI_FAILURE (status2)) {
+				return_ACPI_STATUS (status2);
+			}
+			op = NULL;
+
+			status = AE_OK;
+			break;
+
+
+		case AE_CTRL_TERMINATE:
+
+			status = AE_OK;
+
+			/* Clean up */
+			do {
+				if (op) {
+					status2 = acpi_ps_complete_this_op (walk_state, op);
+					if (ACPI_FAILURE (status2)) {
+						return_ACPI_STATUS (status2);
+					}
+				}
+				acpi_ps_pop_scope (parser_state, &op,
+					&walk_state->arg_types, &walk_state->arg_count);
+
+			} while (op);
+
+			return_ACPI_STATUS (status);
+
+
+		default:  /* All other non-AE_OK status */
+
+			do {
+				if (op) {
+					status2 = acpi_ps_complete_this_op (walk_state, op);
+					if (ACPI_FAILURE (status2)) {
+						return_ACPI_STATUS (status2);
+					}
+				}
+				acpi_ps_pop_scope (parser_state, &op,
+					&walk_state->arg_types, &walk_state->arg_count);
+
+			} while (op);
+
+
+			/*
+			 * TBD: Cleanup parse ops on error
+			 */
+#if 0
+			if (op == NULL) {
+				acpi_ps_pop_scope (parser_state, &op,
+					&walk_state->arg_types, &walk_state->arg_count);
+			}
+#endif
+			walk_state->prev_op = op;
+			walk_state->prev_arg_types = walk_state->arg_types;
+			return_ACPI_STATUS (status);
+		}
+
+		/* This scope complete? */
+
+		if (acpi_ps_has_completed_scope (parser_state)) {
+			acpi_ps_pop_scope (parser_state, &op,
+				&walk_state->arg_types, &walk_state->arg_count);
+			ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "Popped scope, Op=%p\n", op));
+		}
+		else {
+			op = NULL;
+		}
+
+	} /* while parser_state->Aml */
+
+
+	/*
+	 * Complete the last Op (if not completed), and clear the scope stack.
+	 * It is easily possible to end an AML "package" with an unbounded number
+	 * of open scopes (such as when several ASL blocks are closed with
+	 * sequential closing braces).  We want to terminate each one cleanly.
+	 */
+	ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, "AML package complete at Op %p\n", op));
+	do {
+		if (op) {
+			if (walk_state->ascending_callback != NULL) {
+				walk_state->op    = op;
+				walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode);
+				walk_state->opcode = op->common.aml_opcode;
+
+				status = walk_state->ascending_callback (walk_state);
+				status = acpi_ps_next_parse_state (walk_state, op, status);
+				if (status == AE_CTRL_PENDING) {
+					status = AE_OK;
+					goto close_this_op;
+				}
+
+				if (status == AE_CTRL_TERMINATE) {
+					status = AE_OK;
+
+					/* Clean up */
+					do {
+						if (op) {
+							status2 = acpi_ps_complete_this_op (walk_state, op);
+							if (ACPI_FAILURE (status2)) {
+								return_ACPI_STATUS (status2);
+							}
+						}
+
+						acpi_ps_pop_scope (parser_state, &op,
+							&walk_state->arg_types, &walk_state->arg_count);
+
+					} while (op);
+
+					return_ACPI_STATUS (status);
+				}
+
+				else if (ACPI_FAILURE (status)) {
+					/* First error is most important */
+
+					(void) acpi_ps_complete_this_op (walk_state, op);
+					return_ACPI_STATUS (status);
+				}
+			}
+
+			status2 = acpi_ps_complete_this_op (walk_state, op);
+			if (ACPI_FAILURE (status2)) {
+				return_ACPI_STATUS (status2);
+			}
+		}
+
+		acpi_ps_pop_scope (parser_state, &op, &walk_state->arg_types,
+			&walk_state->arg_count);
+
+	} while (op);
+
+	return_ACPI_STATUS (status);
+}
+
+