mfd: ab8500-gpadc: Add gpadc hw conversion
Add the support of gpacd hw conversion and make the number of
sample configurable.
Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 45fe3c5..59ecd8c 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -101,6 +101,11 @@
static struct device_attribute **dev_attr;
static char **event_name;
+static u8 avg_sample = SAMPLE_16;
+static u8 trig_edge = RISING_EDGE;
+static u8 conv_type = ADC_SW;
+static u8 trig_timer;
+
/**
* struct ab8500_reg_range
* @first: the first address of the range
@@ -808,9 +813,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL);
+ bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL,
+ avg_sample, trig_edge, trig_timer, conv_type);
bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- BAT_CTRL, bat_ctrl_raw);
+ BAT_CTRL, bat_ctrl_raw);
return seq_printf(s, "%d,0x%X\n",
bat_ctrl_convert, bat_ctrl_raw);
@@ -836,9 +842,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL);
+ btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL,
+ avg_sample, trig_edge, trig_timer, conv_type);
btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
- btemp_ball_raw);
+ btemp_ball_raw);
return seq_printf(s,
"%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
@@ -865,9 +872,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V);
+ main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V,
+ avg_sample, trig_edge, trig_timer, conv_type);
main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- MAIN_CHARGER_V, main_charger_v_raw);
+ MAIN_CHARGER_V, main_charger_v_raw);
return seq_printf(s, "%d,0x%X\n",
main_charger_v_convert, main_charger_v_raw);
@@ -895,9 +903,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1);
+ acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1,
+ avg_sample, trig_edge, trig_timer, conv_type);
acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1,
- acc_detect1_raw);
+ acc_detect1_raw);
return seq_printf(s, "%d,0x%X\n",
acc_detect1_convert, acc_detect1_raw);
@@ -925,9 +934,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2);
+ acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2,
+ avg_sample, trig_edge, trig_timer, conv_type);
acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- ACC_DETECT2, acc_detect2_raw);
+ ACC_DETECT2, acc_detect2_raw);
return seq_printf(s, "%d,0x%X\n",
acc_detect2_convert, acc_detect2_raw);
@@ -955,9 +965,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1);
+ aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1,
+ avg_sample, trig_edge, trig_timer, conv_type);
aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1,
- aux1_raw);
+ aux1_raw);
return seq_printf(s, "%d,0x%X\n",
aux1_convert, aux1_raw);
@@ -983,9 +994,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2);
+ aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2,
+ avg_sample, trig_edge, trig_timer, conv_type);
aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2,
- aux2_raw);
+ aux2_raw);
return seq_printf(s, "%d,0x%X\n",
aux2_convert, aux2_raw);
@@ -1011,9 +1023,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V);
+ main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V,
+ avg_sample, trig_edge, trig_timer, conv_type);
main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
- main_bat_v_raw);
+ main_bat_v_raw);
return seq_printf(s, "%d,0x%X\n",
main_bat_v_convert, main_bat_v_raw);
@@ -1040,9 +1053,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V);
+ vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V,
+ avg_sample, trig_edge, trig_timer, conv_type);
vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V,
- vbus_v_raw);
+ vbus_v_raw);
return seq_printf(s, "%d,0x%X\n",
vbus_v_convert, vbus_v_raw);
@@ -1068,9 +1082,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C);
+ main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C,
+ avg_sample, trig_edge, trig_timer, conv_type);
main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- MAIN_CHARGER_C, main_charger_c_raw);
+ MAIN_CHARGER_C, main_charger_c_raw);
return seq_printf(s, "%d,0x%X\n",
main_charger_c_convert, main_charger_c_raw);
@@ -1098,9 +1113,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C);
+ usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C,
+ avg_sample, trig_edge, trig_timer, conv_type);
usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- USB_CHARGER_C, usb_charger_c_raw);
+ USB_CHARGER_C, usb_charger_c_raw);
return seq_printf(s, "%d,0x%X\n",
usb_charger_c_convert, usb_charger_c_raw);
@@ -1128,9 +1144,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V);
+ bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V,
+ avg_sample, trig_edge, trig_timer, conv_type);
bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
- BK_BAT_V, bk_bat_v_raw);
+ BK_BAT_V, bk_bat_v_raw);
return seq_printf(s, "%d,0x%X\n",
bk_bat_v_convert, bk_bat_v_raw);
@@ -1156,9 +1173,10 @@
struct ab8500_gpadc *gpadc;
gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP);
+ die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP,
+ avg_sample, trig_edge, trig_timer, conv_type);
die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP,
- die_temp_raw);
+ die_temp_raw);
return seq_printf(s, "%d,0x%X\n",
die_temp_convert, die_temp_raw);
@@ -1177,6 +1195,208 @@
.owner = THIS_MODULE,
};
+static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p)
+{
+ return seq_printf(s, "%d\n", avg_sample);
+}
+
+static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_avg_sample_print,
+ inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_avg_sample_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct device *dev = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_avg_sample;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_avg_sample);
+ if (err)
+ return -EINVAL;
+ if ((user_avg_sample == SAMPLE_1) || (user_avg_sample == SAMPLE_4)
+ || (user_avg_sample == SAMPLE_8)
+ || (user_avg_sample == SAMPLE_16)) {
+ avg_sample = (u8) user_avg_sample;
+ } else {
+ dev_err(dev, "debugfs error input: "
+ "should be egal to 1, 4, 8 or 16\n");
+ return -EINVAL;
+ }
+ return buf_size;
+}
+
+static const struct file_operations ab8500_gpadc_avg_sample_fops = {
+ .open = ab8500_gpadc_avg_sample_open,
+ .read = seq_read,
+ .write = ab8500_gpadc_avg_sample_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p)
+{
+ return seq_printf(s, "%d\n", trig_edge);
+}
+
+static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_trig_edge_print,
+ inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_trig_edge_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct device *dev = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_trig_edge;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_trig_edge);
+ if (err)
+ return -EINVAL;
+ if ((user_trig_edge == RISING_EDGE)
+ || (user_trig_edge == FALLING_EDGE)) {
+ trig_edge = (u8) user_trig_edge;
+ } else {
+ dev_err(dev, "Wrong input:\n"
+ "Enter 0. Rising edge\n"
+ "Enter 1. Falling edge\n");
+ return -EINVAL;
+ }
+ return buf_size;
+}
+
+static const struct file_operations ab8500_gpadc_trig_edge_fops = {
+ .open = ab8500_gpadc_trig_edge_open,
+ .read = seq_read,
+ .write = ab8500_gpadc_trig_edge_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p)
+{
+ return seq_printf(s, "%d\n", trig_timer);
+}
+
+static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_trig_timer_print,
+ inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_trig_timer_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct device *dev = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_trig_timer;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_trig_timer);
+ if (err)
+ return -EINVAL;
+ if ((user_trig_timer >= 0) && (user_trig_timer <= 255)) {
+ trig_timer = (u8) user_trig_timer;
+ } else {
+ dev_err(dev, "debugfs error input: "
+ "should be beetween 0 to 255\n");
+ return -EINVAL;
+ }
+ return buf_size;
+}
+
+static const struct file_operations ab8500_gpadc_trig_timer_fops = {
+ .open = ab8500_gpadc_trig_timer_open,
+ .read = seq_read,
+ .write = ab8500_gpadc_trig_timer_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p)
+{
+ return seq_printf(s, "%d\n", conv_type);
+}
+
+static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_conv_type_print,
+ inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_conv_type_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct device *dev = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_conv_type;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_conv_type);
+ if (err)
+ return -EINVAL;
+ if ((user_conv_type == ADC_SW)
+ || (user_conv_type == ADC_HW)) {
+ conv_type = (u8) user_conv_type;
+ } else {
+ dev_err(dev, "Wrong input:\n"
+ "Enter 0. ADC SW conversion\n"
+ "Enter 1. ADC HW conversion\n");
+ return -EINVAL;
+ }
+ return buf_size;
+}
+
+static const struct file_operations ab8500_gpadc_conv_type_fops = {
+ .open = ab8500_gpadc_conv_type_open,
+ .read = seq_read,
+ .write = ab8500_gpadc_conv_type_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
/*
* return length of an ASCII numerical value, 0 is string is not a
* numerical value.
@@ -1722,6 +1942,26 @@
if (!file)
goto err;
+ file = debugfs_create_file("avg_sample", (S_IRUGO | S_IWUGO),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_avg_sample_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("trig_edge", (S_IRUGO | S_IWUGO),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_edge_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("trig_timer", (S_IRUGO | S_IWUGO),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_timer_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("conv_type", (S_IRUGO | S_IWUGO),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_conv_type_fops);
+ if (!file)
+ goto err;
+
return 0;
err:
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 7f39479..8673bf6 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -55,13 +55,18 @@
#define EN_VTVOUT 0x02
#define EN_GPADC 0x01
#define DIS_GPADC 0x00
-#define SW_AVG_16 0x60
+#define AVG_1 0x00
+#define AVG_4 0x20
+#define AVG_8 0x40
+#define AVG_16 0x60
#define ADC_SW_CONV 0x04
#define EN_ICHAR 0x80
#define BTEMP_PULL_UP 0x08
#define EN_BUF 0x40
#define DIS_ZERO 0x00
#define GPADC_BUSY 0x01
+#define EN_FALLING 0x10
+#define EN_TRIG_EDGE 0x02
/* GPADC constants from AB8500 spec, UM0836 */
#define ADC_RESOLUTION 1024
@@ -116,7 +121,10 @@
* the completion of gpadc conversion
* @ab8500_gpadc_lock: structure of type mutex
* @regu: pointer to the struct regulator
- * @irq: interrupt number that is used by gpadc
+ * @irq_sw: interrupt number that is used by gpadc for Sw
+ * conversion
+ * @irq_hw: interrupt number that is used by gpadc for Hw
+ * conversion
* @cal_data array of ADC calibration data structs
*/
struct ab8500_gpadc {
@@ -126,7 +134,8 @@
struct completion ab8500_gpadc_complete;
struct mutex ab8500_gpadc_lock;
struct regulator *regu;
- int irq;
+ int irq_sw;
+ int irq_hw;
struct adc_cal_data cal_data[NBR_CAL_INPUTS];
};
@@ -244,30 +253,35 @@
EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
/**
- * ab8500_gpadc_convert() - gpadc conversion
+ * ab8500_gpadc_sw_hw_convert() - gpadc conversion
* @channel: analog channel to be converted to digital data
+ * @avg_sample: number of ADC sample to average
+ * @trig_egde: selected ADC trig edge
+ * @trig_timer: selected ADC trigger delay timer
+ * @conv_type: selected conversion type (HW or SW conversion)
*
* This function converts the selected analog i/p to digital
* data.
*/
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
{
int ad_value;
int voltage;
- ad_value = ab8500_gpadc_read_raw(gpadc, channel);
-
- /* On failure retry a second time */
+ ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
+ trig_edge, trig_timer, conv_type);
+/* On failure retry a second time */
if (ad_value < 0)
- ad_value = ab8500_gpadc_read_raw(gpadc, channel);
-
- if (ad_value < 0) {
- dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel);
+ ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
+ trig_edge, trig_timer, conv_type);
+if (ad_value < 0) {
+ dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
+ channel);
return ad_value;
}
voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
-
if (voltage < 0)
dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
" %d AD: 0x%x\n", channel, ad_value);
@@ -279,11 +293,16 @@
/**
* ab8500_gpadc_read_raw() - gpadc read
* @channel: analog channel to be read
+ * @avg_sample: number of ADC sample to average
+ * @trig_edge: selected trig edge
+ * @trig_timer: selected ADC trigger delay timer
+ * @conv_type: selected conversion type (HW or SW conversion)
*
- * This function obtains the raw ADC value, this then needs
- * to be converted by calling ab8500_gpadc_ad_to_voltage()
+ * This function obtains the raw ADC value for an hardware conversion,
+ * this then needs to be converted by calling ab8500_gpadc_ad_to_voltage()
*/
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
{
int ret;
int looplimit = 0;
@@ -293,7 +312,6 @@
return -ENODEV;
mutex_lock(&gpadc->ab8500_gpadc_lock);
-
/* Enable VTVout LDO this is required for GPADC */
pm_runtime_get_sync(gpadc->dev);
@@ -321,9 +339,29 @@
goto out;
}
- /* Select the channel source and set average samples to 16 */
- ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_CTRL2_REG, (channel | SW_AVG_16));
+ /* Select the channel source and set average samples */
+ switch (avg_sample) {
+ case SAMPLE_1:
+ val = channel | AVG_1;
+ break;
+ case SAMPLE_4:
+ val = channel | AVG_4;
+ break;
+ case SAMPLE_8:
+ val = channel | AVG_8;
+ break;
+ default:
+ val = channel | AVG_16;
+ break;
+
+ }
+
+ if (conv_type == ADC_HW)
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val);
+ else
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: set avg samples failed\n");
@@ -335,22 +373,43 @@
* charging current sense if it needed, ABB 3.0 needs some special
* treatment too.
*/
+ if ((conv_type == ADC_HW) && (trig_edge)) {
+ ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+ EN_FALLING, EN_FALLING);
+
+ }
switch (channel) {
case MAIN_CHARGER_C:
case USB_CHARGER_C:
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | EN_ICHAR,
- EN_BUF | EN_ICHAR);
- break;
- case BTEMP_BALL:
- if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
- /* Turn on btemp pull-up on ABB 3.0 */
+ if (conv_type == ADC_HW)
ret = abx500_mask_and_set_register_interruptible(
gpadc->dev,
AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | BTEMP_PULL_UP,
- EN_BUF | BTEMP_PULL_UP);
+ EN_BUF | EN_ICHAR | EN_TRIG_EDGE,
+ EN_BUF | EN_ICHAR | EN_TRIG_EDGE);
+ else
+ ret = abx500_mask_and_set_register_interruptible(
+ gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+ EN_BUF | EN_ICHAR,
+ EN_BUF | EN_ICHAR);
+ break;
+ case BTEMP_BALL:
+ if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
+ if (conv_type == ADC_HW)
+ /* Turn on btemp pull-up on ABB 3.0 */
+ ret = abx500_mask_and_set_register_interruptible
+ (gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+ EN_BUF | BTEMP_PULL_UP | EN_TRIG_EDGE,
+ EN_BUF | BTEMP_PULL_UP | EN_TRIG_EDGE);
+ else
+ ret = abx500_mask_and_set_register_interruptible
+ (gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+ EN_BUF | BTEMP_PULL_UP,
+ EN_BUF | BTEMP_PULL_UP);
/*
* Delay might be needed for ABB8500 cut 3.0, if not, remove
@@ -361,8 +420,17 @@
}
/* Intentional fallthrough */
default:
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF);
+ if (conv_type == ADC_HW)
+ ret = abx500_mask_and_set_register_interruptible(
+ gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+ EN_BUF | EN_TRIG_EDGE,
+ EN_BUF | EN_TRIG_EDGE);
+ else
+ ret = abx500_mask_and_set_register_interruptible(
+ gpadc->dev,
+ AB8500_GPADC,
+ AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF);
break;
}
if (ret < 0) {
@@ -371,36 +439,83 @@
goto out;
}
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ADC_SW_CONV, ADC_SW_CONV);
- if (ret < 0) {
- dev_err(gpadc->dev,
- "gpadc_conversion: start s/w conversion failed\n");
- goto out;
+ /* Set trigger delay timer */
+ if (conv_type == ADC_HW) {
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: trig timer failed\n");
+ goto out;
+ }
}
+
+ /* Start SW conversion */
+ if (conv_type == ADC_SW) {
+ ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+ ADC_SW_CONV, ADC_SW_CONV);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: start s/w conv failed\n");
+ goto out;
+ }
+ }
+
/* wait for completion of conversion */
- if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
- msecs_to_jiffies(CONVERSION_TIME))) {
- dev_err(gpadc->dev,
- "timeout: didn't receive GPADC conversion interrupt\n");
- ret = -EINVAL;
- goto out;
+ if (conv_type == ADC_HW) {
+ if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
+ 2*HZ)) {
+ dev_err(gpadc->dev,
+ "timeout didn't receive"
+ " hw GPADC conv interrupt\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ } else {
+ if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
+ msecs_to_jiffies(CONVERSION_TIME))) {
+ dev_err(gpadc->dev,
+ "timeout didn't receive"
+ " sw GPADC conv interrupt\n");
+ ret = -EINVAL;
+ goto out;
+ }
}
/* Read the converted RAW data */
- ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_MANDATAL_REG, &low_data);
- if (ret < 0) {
- dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
- goto out;
- }
+ if (conv_type == ADC_HW) {
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_AUTODATAL_REG, &low_data);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read hw low data failed\n");
+ goto out;
+ }
- ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_MANDATAH_REG, &high_data);
- if (ret < 0) {
- dev_err(gpadc->dev,
- "gpadc_conversion: read high data failed\n");
- goto out;
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_AUTODATAH_REG, &high_data);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read hw high data failed\n");
+ goto out;
+ }
+ } else {
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_MANDATAL_REG, &low_data);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read sw low data failed\n");
+ goto out;
+ }
+
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_MANDATAH_REG, &high_data);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read sw high data failed\n");
+ goto out;
+ }
}
/* Disable GPADC */
@@ -411,6 +526,7 @@
goto out;
}
+ /* Disable VTVout LDO this is required for GPADC */
pm_runtime_mark_last_busy(gpadc->dev);
pm_runtime_put_autosuspend(gpadc->dev);
@@ -427,9 +543,7 @@
*/
(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-
pm_runtime_put(gpadc->dev);
-
mutex_unlock(&gpadc->ab8500_gpadc_lock);
dev_err(gpadc->dev,
"gpadc_conversion: Failed to AD convert channel %d\n", channel);
@@ -438,16 +552,16 @@
EXPORT_SYMBOL(ab8500_gpadc_read_raw);
/**
- * ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
+ * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
* @irq: irq number
* @data: pointer to the data passed during request irq
*
- * This is a interrupt service routine for s/w gpadc conversion completion.
+ * This is a interrupt service routine for gpadc conversion completion.
* Notifies the gpadc completion is completed and the converted raw value
* can be read from the registers.
* Returns IRQ status(IRQ_HANDLED)
*/
-static irqreturn_t ab8500_bm_gpswadcconvend_handler(int irq, void *_gpadc)
+static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc)
{
struct ab8500_gpadc *gpadc = _gpadc;
@@ -646,11 +760,19 @@
return -ENOMEM;
}
- gpadc->irq = platform_get_irq_byname(pdev, "SW_CONV_END");
- if (gpadc->irq < 0) {
- dev_err(&pdev->dev, "failed to get platform irq-%d\n",
- gpadc->irq);
- ret = gpadc->irq;
+ gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
+ if (gpadc->irq_sw < 0) {
+ dev_err(gpadc->dev, "failed to get platform irq-%d\n",
+ gpadc->irq_sw);
+ ret = gpadc->irq_sw;
+ goto fail;
+ }
+
+ gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
+ if (gpadc->irq_hw < 0) {
+ dev_err(gpadc->dev, "failed to get platform irq-%d\n",
+ gpadc->irq_hw);
+ ret = gpadc->irq_hw;
goto fail;
}
@@ -661,14 +783,21 @@
/* Initialize completion used to notify completion of conversion */
init_completion(&gpadc->ab8500_gpadc_complete);
- /* Register interrupt - SwAdcComplete */
- ret = request_threaded_irq(gpadc->irq, NULL,
- ab8500_bm_gpswadcconvend_handler,
- IRQF_ONESHOT | IRQF_NO_SUSPEND | IRQF_SHARED,
- "ab8500-gpadc", gpadc);
+ /* Register interrupts */
+ ret = request_threaded_irq(gpadc->irq_sw, NULL,
+ ab8500_bm_gpadcconvend_handler,
+ IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-sw", gpadc);
if (ret < 0) {
dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n",
- gpadc->irq);
+ gpadc->irq_sw);
+ goto fail;
+ }
+ ret = request_threaded_irq(gpadc->irq_hw, NULL,
+ ab8500_bm_gpadcconvend_handler,
+ IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-hw", gpadc);
+ if (ret < 0) {
+ dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n",
+ gpadc->irq_hw);
goto fail;
}
@@ -694,7 +823,8 @@
dev_dbg(gpadc->dev, "probe success\n");
return 0;
fail_irq:
- free_irq(gpadc->irq, gpadc);
+ free_irq(gpadc->irq_sw, gpadc);
+ free_irq(gpadc->irq_hw, gpadc);
fail:
kfree(gpadc);
gpadc = NULL;
@@ -708,7 +838,8 @@
/* remove this gpadc entry from the list */
list_del(&gpadc->node);
/* remove interrupt - completion of Sw ADC conversion */
- free_irq(gpadc->irq, gpadc);
+ free_irq(gpadc->irq_sw, gpadc);
+ free_irq(gpadc->irq_hw, gpadc);
pm_runtime_get_sync(gpadc->dev);
pm_runtime_disable(gpadc->dev);
@@ -757,6 +888,7 @@
module_exit(ab8500_gpadc_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson");
+MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
+ "M'boumba Cedric Madianga");
MODULE_ALIAS("platform:ab8500_gpadc");
MODULE_DESCRIPTION("AB8500 GPADC driver");
diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h
index 2529667..7694e7a 100644
--- a/include/linux/mfd/abx500/ab8500-gpadc.h
+++ b/include/linux/mfd/abx500/ab8500-gpadc.h
@@ -4,12 +4,14 @@
*
* Author: Arun R Murthy <arun.murthy@stericsson.com>
* Author: Daniel Willerud <daniel.willerud@stericsson.com>
+ * Author: M'boumba Cedric Madianga <cedric.madianga@stericsson.com>
*/
#ifndef _AB8500_GPADC_H
#define _AB8500_GPADC_H
-/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */
+/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2
+ * and ADCHwSel[4:0] in GPADCCtrl3 ) */
#define BAT_CTRL 0x01
#define BTEMP_BALL 0x02
#define MAIN_CHARGER_V 0x03
@@ -24,12 +26,32 @@
#define BK_BAT_V 0x0C
#define DIE_TEMP 0x0D
+#define SAMPLE_1 1
+#define SAMPLE_4 4
+#define SAMPLE_8 8
+#define SAMPLE_16 16
+#define RISING_EDGE 0
+#define FALLING_EDGE 1
+
+/* Arbitrary ADC conversion type constants */
+#define ADC_SW 0
+#define ADC_HW 1
+
+
struct ab8500_gpadc;
struct ab8500_gpadc *ab8500_gpadc_get(char *name);
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel);
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
+static inline int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+{
+ return ab8500_gpadc_sw_hw_convert(gpadc, channel,
+ SAMPLE_16, 0, 0, ADC_SW);
+}
+
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+ u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
- u8 channel, int ad_value);
+ u8 channel, int ad_value);
#endif /* _AB8500_GPADC_H */