| /** |
| * core.c - DesignWare USB3 DRD Controller Core file |
| * |
| * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com |
| * |
| * Authors: Felipe Balbi <balbi@ti.com>, |
| * Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 of |
| * the License as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/io.h> |
| #include <linux/list.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/of.h> |
| |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/of.h> |
| #include <linux/usb/otg.h> |
| |
| #include "platform_data.h" |
| #include "core.h" |
| #include "gadget.h" |
| #include "io.h" |
| |
| #include "debug.h" |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| void dwc3_set_mode(struct dwc3 *dwc, u32 mode) |
| { |
| u32 reg; |
| |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); |
| reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); |
| reg |= DWC3_GCTL_PRTCAPDIR(mode); |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); |
| } |
| |
| /** |
| * dwc3_core_soft_reset - Issues core soft reset and PHY reset |
| * @dwc: pointer to our context structure |
| */ |
| static int dwc3_core_soft_reset(struct dwc3 *dwc) |
| { |
| u32 reg; |
| int ret; |
| |
| /* Before Resetting PHY, put Core in Reset */ |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); |
| reg |= DWC3_GCTL_CORESOFTRESET; |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); |
| |
| /* Assert USB3 PHY reset */ |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); |
| reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; |
| dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); |
| |
| /* Assert USB2 PHY reset */ |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); |
| reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; |
| dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); |
| |
| usb_phy_init(dwc->usb2_phy); |
| usb_phy_init(dwc->usb3_phy); |
| ret = phy_init(dwc->usb2_generic_phy); |
| if (ret < 0) |
| return ret; |
| |
| ret = phy_init(dwc->usb3_generic_phy); |
| if (ret < 0) { |
| phy_exit(dwc->usb2_generic_phy); |
| return ret; |
| } |
| mdelay(100); |
| |
| /* Clear USB3 PHY reset */ |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); |
| reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; |
| dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); |
| |
| /* Clear USB2 PHY reset */ |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); |
| reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; |
| dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); |
| |
| mdelay(100); |
| |
| /* After PHYs are stable we can take Core out of reset state */ |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); |
| reg &= ~DWC3_GCTL_CORESOFTRESET; |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); |
| |
| return 0; |
| } |
| |
| /** |
| * dwc3_free_one_event_buffer - Frees one event buffer |
| * @dwc: Pointer to our controller context structure |
| * @evt: Pointer to event buffer to be freed |
| */ |
| static void dwc3_free_one_event_buffer(struct dwc3 *dwc, |
| struct dwc3_event_buffer *evt) |
| { |
| dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma); |
| } |
| |
| /** |
| * dwc3_alloc_one_event_buffer - Allocates one event buffer structure |
| * @dwc: Pointer to our controller context structure |
| * @length: size of the event buffer |
| * |
| * Returns a pointer to the allocated event buffer structure on success |
| * otherwise ERR_PTR(errno). |
| */ |
| static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, |
| unsigned length) |
| { |
| struct dwc3_event_buffer *evt; |
| |
| evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL); |
| if (!evt) |
| return ERR_PTR(-ENOMEM); |
| |
| evt->dwc = dwc; |
| evt->length = length; |
| evt->buf = dma_alloc_coherent(dwc->dev, length, |
| &evt->dma, GFP_KERNEL); |
| if (!evt->buf) |
| return ERR_PTR(-ENOMEM); |
| |
| return evt; |
| } |
| |
| /** |
| * dwc3_free_event_buffers - frees all allocated event buffers |
| * @dwc: Pointer to our controller context structure |
| */ |
| static void dwc3_free_event_buffers(struct dwc3 *dwc) |
| { |
| struct dwc3_event_buffer *evt; |
| int i; |
| |
| for (i = 0; i < dwc->num_event_buffers; i++) { |
| evt = dwc->ev_buffs[i]; |
| if (evt) |
| dwc3_free_one_event_buffer(dwc, evt); |
| } |
| } |
| |
| /** |
| * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length |
| * @dwc: pointer to our controller context structure |
| * @length: size of event buffer |
| * |
| * Returns 0 on success otherwise negative errno. In the error case, dwc |
| * may contain some buffers allocated but not all which were requested. |
| */ |
| static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) |
| { |
| int num; |
| int i; |
| |
| num = DWC3_NUM_INT(dwc->hwparams.hwparams1); |
| dwc->num_event_buffers = num; |
| |
| dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num, |
| GFP_KERNEL); |
| if (!dwc->ev_buffs) |
| return -ENOMEM; |
| |
| for (i = 0; i < num; i++) { |
| struct dwc3_event_buffer *evt; |
| |
| evt = dwc3_alloc_one_event_buffer(dwc, length); |
| if (IS_ERR(evt)) { |
| dev_err(dwc->dev, "can't allocate event buffer\n"); |
| return PTR_ERR(evt); |
| } |
| dwc->ev_buffs[i] = evt; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * dwc3_event_buffers_setup - setup our allocated event buffers |
| * @dwc: pointer to our controller context structure |
| * |
| * Returns 0 on success otherwise negative errno. |
| */ |
| static int dwc3_event_buffers_setup(struct dwc3 *dwc) |
| { |
| struct dwc3_event_buffer *evt; |
| int n; |
| |
| for (n = 0; n < dwc->num_event_buffers; n++) { |
| evt = dwc->ev_buffs[n]; |
| dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", |
| evt->buf, (unsigned long long) evt->dma, |
| evt->length); |
| |
| evt->lpos = 0; |
| |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), |
| lower_32_bits(evt->dma)); |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), |
| upper_32_bits(evt->dma)); |
| dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), |
| DWC3_GEVNTSIZ_SIZE(evt->length)); |
| dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); |
| } |
| |
| return 0; |
| } |
| |
| static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) |
| { |
| struct dwc3_event_buffer *evt; |
| int n; |
| |
| for (n = 0; n < dwc->num_event_buffers; n++) { |
| evt = dwc->ev_buffs[n]; |
| |
| evt->lpos = 0; |
| |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0); |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0); |
| dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_INTMASK |
| | DWC3_GEVNTSIZ_SIZE(0)); |
| dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); |
| } |
| } |
| |
| static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc) |
| { |
| if (!dwc->has_hibernation) |
| return 0; |
| |
| if (!dwc->nr_scratch) |
| return 0; |
| |
| dwc->scratchbuf = kmalloc_array(dwc->nr_scratch, |
| DWC3_SCRATCHBUF_SIZE, GFP_KERNEL); |
| if (!dwc->scratchbuf) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static int dwc3_setup_scratch_buffers(struct dwc3 *dwc) |
| { |
| dma_addr_t scratch_addr; |
| u32 param; |
| int ret; |
| |
| if (!dwc->has_hibernation) |
| return 0; |
| |
| if (!dwc->nr_scratch) |
| return 0; |
| |
| /* should never fall here */ |
| if (!WARN_ON(dwc->scratchbuf)) |
| return 0; |
| |
| scratch_addr = dma_map_single(dwc->dev, dwc->scratchbuf, |
| dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE, |
| DMA_BIDIRECTIONAL); |
| if (dma_mapping_error(dwc->dev, scratch_addr)) { |
| dev_err(dwc->dev, "failed to map scratch buffer\n"); |
| ret = -EFAULT; |
| goto err0; |
| } |
| |
| dwc->scratch_addr = scratch_addr; |
| |
| param = lower_32_bits(scratch_addr); |
| |
| ret = dwc3_send_gadget_generic_command(dwc, |
| DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param); |
| if (ret < 0) |
| goto err1; |
| |
| param = upper_32_bits(scratch_addr); |
| |
| ret = dwc3_send_gadget_generic_command(dwc, |
| DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param); |
| if (ret < 0) |
| goto err1; |
| |
| return 0; |
| |
| err1: |
| dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * |
| DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); |
| |
| err0: |
| return ret; |
| } |
| |
| static void dwc3_free_scratch_buffers(struct dwc3 *dwc) |
| { |
| if (!dwc->has_hibernation) |
| return; |
| |
| if (!dwc->nr_scratch) |
| return; |
| |
| /* should never fall here */ |
| if (!WARN_ON(dwc->scratchbuf)) |
| return; |
| |
| dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * |
| DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); |
| kfree(dwc->scratchbuf); |
| } |
| |
| static void dwc3_core_num_eps(struct dwc3 *dwc) |
| { |
| struct dwc3_hwparams *parms = &dwc->hwparams; |
| |
| dwc->num_in_eps = DWC3_NUM_IN_EPS(parms); |
| dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps; |
| |
| dev_vdbg(dwc->dev, "found %d IN and %d OUT endpoints\n", |
| dwc->num_in_eps, dwc->num_out_eps); |
| } |
| |
| static void dwc3_cache_hwparams(struct dwc3 *dwc) |
| { |
| struct dwc3_hwparams *parms = &dwc->hwparams; |
| |
| parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0); |
| parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1); |
| parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2); |
| parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3); |
| parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4); |
| parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5); |
| parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6); |
| parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7); |
| parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); |
| } |
| |
| /** |
| * dwc3_core_init - Low-level initialization of DWC3 Core |
| * @dwc: Pointer to our controller context structure |
| * |
| * Returns 0 on success otherwise negative errno. |
| */ |
| static int dwc3_core_init(struct dwc3 *dwc) |
| { |
| unsigned long timeout; |
| u32 hwparams4 = dwc->hwparams.hwparams4; |
| u32 reg; |
| int ret; |
| |
| reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); |
| /* This should read as U3 followed by revision number */ |
| if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) { |
| dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); |
| ret = -ENODEV; |
| goto err0; |
| } |
| dwc->revision = reg; |
| |
| /* Handle USB2.0-only core configuration */ |
| if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == |
| DWC3_GHWPARAMS3_SSPHY_IFC_DIS) { |
| if (dwc->maximum_speed == USB_SPEED_SUPER) |
| dwc->maximum_speed = USB_SPEED_HIGH; |
| } |
| |
| /* issue device SoftReset too */ |
| timeout = jiffies + msecs_to_jiffies(500); |
| dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); |
| do { |
| reg = dwc3_readl(dwc->regs, DWC3_DCTL); |
| if (!(reg & DWC3_DCTL_CSFTRST)) |
| break; |
| |
| if (time_after(jiffies, timeout)) { |
| dev_err(dwc->dev, "Reset Timed Out\n"); |
| ret = -ETIMEDOUT; |
| goto err0; |
| } |
| |
| cpu_relax(); |
| } while (true); |
| |
| ret = dwc3_core_soft_reset(dwc); |
| if (ret) |
| goto err0; |
| |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); |
| reg &= ~DWC3_GCTL_SCALEDOWN_MASK; |
| reg &= ~DWC3_GCTL_DISSCRAMBLE; |
| |
| switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { |
| case DWC3_GHWPARAMS1_EN_PWROPT_CLK: |
| /** |
| * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an |
| * issue which would cause xHCI compliance tests to fail. |
| * |
| * Because of that we cannot enable clock gating on such |
| * configurations. |
| * |
| * Refers to: |
| * |
| * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based |
| * SOF/ITP Mode Used |
| */ |
| if ((dwc->dr_mode == USB_DR_MODE_HOST || |
| dwc->dr_mode == USB_DR_MODE_OTG) && |
| (dwc->revision >= DWC3_REVISION_210A && |
| dwc->revision <= DWC3_REVISION_250A)) |
| reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC; |
| else |
| reg &= ~DWC3_GCTL_DSBLCLKGTNG; |
| break; |
| case DWC3_GHWPARAMS1_EN_PWROPT_HIB: |
| /* enable hibernation here */ |
| dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4); |
| break; |
| default: |
| dev_dbg(dwc->dev, "No power optimization available\n"); |
| } |
| |
| /* |
| * WORKAROUND: DWC3 revisions <1.90a have a bug |
| * where the device can fail to connect at SuperSpeed |
| * and falls back to high-speed mode which causes |
| * the device to enter a Connect/Disconnect loop |
| */ |
| if (dwc->revision < DWC3_REVISION_190A) |
| reg |= DWC3_GCTL_U2RSTECN; |
| |
| dwc3_core_num_eps(dwc); |
| |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); |
| |
| ret = dwc3_alloc_scratch_buffers(dwc); |
| if (ret) |
| goto err1; |
| |
| ret = dwc3_setup_scratch_buffers(dwc); |
| if (ret) |
| goto err2; |
| |
| return 0; |
| |
| err2: |
| dwc3_free_scratch_buffers(dwc); |
| |
| err1: |
| usb_phy_shutdown(dwc->usb2_phy); |
| usb_phy_shutdown(dwc->usb3_phy); |
| phy_exit(dwc->usb2_generic_phy); |
| phy_exit(dwc->usb3_generic_phy); |
| |
| err0: |
| return ret; |
| } |
| |
| static void dwc3_core_exit(struct dwc3 *dwc) |
| { |
| dwc3_free_scratch_buffers(dwc); |
| usb_phy_shutdown(dwc->usb2_phy); |
| usb_phy_shutdown(dwc->usb3_phy); |
| phy_exit(dwc->usb2_generic_phy); |
| phy_exit(dwc->usb3_generic_phy); |
| } |
| |
| static int dwc3_core_get_phy(struct dwc3 *dwc) |
| { |
| struct device *dev = dwc->dev; |
| struct device_node *node = dev->of_node; |
| int ret; |
| |
| if (node) { |
| dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); |
| dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1); |
| } else { |
| dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); |
| dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); |
| } |
| |
| if (IS_ERR(dwc->usb2_phy)) { |
| ret = PTR_ERR(dwc->usb2_phy); |
| if (ret == -ENXIO || ret == -ENODEV) { |
| dwc->usb2_phy = NULL; |
| } else if (ret == -EPROBE_DEFER) { |
| return ret; |
| } else { |
| dev_err(dev, "no usb2 phy configured\n"); |
| return ret; |
| } |
| } |
| |
| if (IS_ERR(dwc->usb3_phy)) { |
| ret = PTR_ERR(dwc->usb3_phy); |
| if (ret == -ENXIO || ret == -ENODEV) { |
| dwc->usb3_phy = NULL; |
| } else if (ret == -EPROBE_DEFER) { |
| return ret; |
| } else { |
| dev_err(dev, "no usb3 phy configured\n"); |
| return ret; |
| } |
| } |
| |
| dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); |
| if (IS_ERR(dwc->usb2_generic_phy)) { |
| ret = PTR_ERR(dwc->usb2_generic_phy); |
| if (ret == -ENOSYS || ret == -ENODEV) { |
| dwc->usb2_generic_phy = NULL; |
| } else if (ret == -EPROBE_DEFER) { |
| return ret; |
| } else { |
| dev_err(dev, "no usb2 phy configured\n"); |
| return ret; |
| } |
| } |
| |
| dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); |
| if (IS_ERR(dwc->usb3_generic_phy)) { |
| ret = PTR_ERR(dwc->usb3_generic_phy); |
| if (ret == -ENOSYS || ret == -ENODEV) { |
| dwc->usb3_generic_phy = NULL; |
| } else if (ret == -EPROBE_DEFER) { |
| return ret; |
| } else { |
| dev_err(dev, "no usb3 phy configured\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int dwc3_core_init_mode(struct dwc3 *dwc) |
| { |
| struct device *dev = dwc->dev; |
| int ret; |
| |
| switch (dwc->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); |
| ret = dwc3_gadget_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize gadget\n"); |
| return ret; |
| } |
| break; |
| case USB_DR_MODE_HOST: |
| dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); |
| ret = dwc3_host_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize host\n"); |
| return ret; |
| } |
| break; |
| case USB_DR_MODE_OTG: |
| dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); |
| ret = dwc3_host_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize host\n"); |
| return ret; |
| } |
| |
| ret = dwc3_gadget_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize gadget\n"); |
| return ret; |
| } |
| break; |
| default: |
| dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void dwc3_core_exit_mode(struct dwc3 *dwc) |
| { |
| switch (dwc->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| dwc3_gadget_exit(dwc); |
| break; |
| case USB_DR_MODE_HOST: |
| dwc3_host_exit(dwc); |
| break; |
| case USB_DR_MODE_OTG: |
| dwc3_host_exit(dwc); |
| dwc3_gadget_exit(dwc); |
| break; |
| default: |
| /* do nothing */ |
| break; |
| } |
| } |
| |
| #define DWC3_ALIGN_MASK (16 - 1) |
| |
| static int dwc3_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct dwc3_platform_data *pdata = dev_get_platdata(dev); |
| struct device_node *node = dev->of_node; |
| struct resource *res; |
| struct dwc3 *dwc; |
| |
| int ret; |
| |
| void __iomem *regs; |
| void *mem; |
| |
| mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); |
| if (!mem) |
| return -ENOMEM; |
| |
| dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); |
| dwc->mem = mem; |
| dwc->dev = dev; |
| |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res) { |
| dev_err(dev, "missing IRQ\n"); |
| return -ENODEV; |
| } |
| dwc->xhci_resources[1].start = res->start; |
| dwc->xhci_resources[1].end = res->end; |
| dwc->xhci_resources[1].flags = res->flags; |
| dwc->xhci_resources[1].name = res->name; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "missing memory resource\n"); |
| return -ENODEV; |
| } |
| |
| dwc->xhci_resources[0].start = res->start; |
| dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + |
| DWC3_XHCI_REGS_END; |
| dwc->xhci_resources[0].flags = res->flags; |
| dwc->xhci_resources[0].name = res->name; |
| |
| res->start += DWC3_GLOBALS_REGS_START; |
| |
| /* |
| * Request memory region but exclude xHCI regs, |
| * since it will be requested by the xhci-plat driver. |
| */ |
| regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| |
| dwc->regs = regs; |
| dwc->regs_size = resource_size(res); |
| /* |
| * restore res->start back to its original value so that, |
| * in case the probe is deferred, we don't end up getting error in |
| * request the memory region the next time probe is called. |
| */ |
| res->start -= DWC3_GLOBALS_REGS_START; |
| |
| if (node) { |
| dwc->maximum_speed = of_usb_get_maximum_speed(node); |
| |
| dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); |
| dwc->dr_mode = of_usb_get_dr_mode(node); |
| } else if (pdata) { |
| dwc->maximum_speed = pdata->maximum_speed; |
| |
| dwc->needs_fifo_resize = pdata->tx_fifo_resize; |
| dwc->dr_mode = pdata->dr_mode; |
| } |
| |
| /* default to superspeed if no maximum_speed passed */ |
| if (dwc->maximum_speed == USB_SPEED_UNKNOWN) |
| dwc->maximum_speed = USB_SPEED_SUPER; |
| |
| ret = dwc3_core_get_phy(dwc); |
| if (ret) |
| return ret; |
| |
| spin_lock_init(&dwc->lock); |
| platform_set_drvdata(pdev, dwc); |
| |
| dev->dma_mask = dev->parent->dma_mask; |
| dev->dma_parms = dev->parent->dma_parms; |
| dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask); |
| |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| pm_runtime_forbid(dev); |
| |
| dwc3_cache_hwparams(dwc); |
| |
| ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); |
| if (ret) { |
| dev_err(dwc->dev, "failed to allocate event buffers\n"); |
| ret = -ENOMEM; |
| goto err0; |
| } |
| |
| if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) |
| dwc->dr_mode = USB_DR_MODE_HOST; |
| else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) |
| dwc->dr_mode = USB_DR_MODE_PERIPHERAL; |
| |
| if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) |
| dwc->dr_mode = USB_DR_MODE_OTG; |
| |
| ret = dwc3_core_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize core\n"); |
| goto err0; |
| } |
| |
| usb_phy_set_suspend(dwc->usb2_phy, 0); |
| usb_phy_set_suspend(dwc->usb3_phy, 0); |
| ret = phy_power_on(dwc->usb2_generic_phy); |
| if (ret < 0) |
| goto err1; |
| |
| ret = phy_power_on(dwc->usb3_generic_phy); |
| if (ret < 0) |
| goto err_usb2phy_power; |
| |
| ret = dwc3_event_buffers_setup(dwc); |
| if (ret) { |
| dev_err(dwc->dev, "failed to setup event buffers\n"); |
| goto err_usb3phy_power; |
| } |
| |
| ret = dwc3_core_init_mode(dwc); |
| if (ret) |
| goto err2; |
| |
| ret = dwc3_debugfs_init(dwc); |
| if (ret) { |
| dev_err(dev, "failed to initialize debugfs\n"); |
| goto err3; |
| } |
| |
| pm_runtime_allow(dev); |
| |
| return 0; |
| |
| err3: |
| dwc3_core_exit_mode(dwc); |
| |
| err2: |
| dwc3_event_buffers_cleanup(dwc); |
| |
| err_usb3phy_power: |
| phy_power_off(dwc->usb3_generic_phy); |
| |
| err_usb2phy_power: |
| phy_power_off(dwc->usb2_generic_phy); |
| |
| err1: |
| usb_phy_set_suspend(dwc->usb2_phy, 1); |
| usb_phy_set_suspend(dwc->usb3_phy, 1); |
| dwc3_core_exit(dwc); |
| |
| err0: |
| dwc3_free_event_buffers(dwc); |
| |
| return ret; |
| } |
| |
| static int dwc3_remove(struct platform_device *pdev) |
| { |
| struct dwc3 *dwc = platform_get_drvdata(pdev); |
| |
| usb_phy_set_suspend(dwc->usb2_phy, 1); |
| usb_phy_set_suspend(dwc->usb3_phy, 1); |
| phy_power_off(dwc->usb2_generic_phy); |
| phy_power_off(dwc->usb3_generic_phy); |
| |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| dwc3_debugfs_exit(dwc); |
| dwc3_core_exit_mode(dwc); |
| dwc3_event_buffers_cleanup(dwc); |
| dwc3_free_event_buffers(dwc); |
| dwc3_core_exit(dwc); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int dwc3_prepare(struct device *dev) |
| { |
| struct dwc3 *dwc = dev_get_drvdata(dev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dwc->lock, flags); |
| |
| switch (dwc->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| case USB_DR_MODE_OTG: |
| dwc3_gadget_prepare(dwc); |
| /* FALLTHROUGH */ |
| case USB_DR_MODE_HOST: |
| default: |
| dwc3_event_buffers_cleanup(dwc); |
| break; |
| } |
| |
| spin_unlock_irqrestore(&dwc->lock, flags); |
| |
| return 0; |
| } |
| |
| static void dwc3_complete(struct device *dev) |
| { |
| struct dwc3 *dwc = dev_get_drvdata(dev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dwc->lock, flags); |
| |
| dwc3_event_buffers_setup(dwc); |
| switch (dwc->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| case USB_DR_MODE_OTG: |
| dwc3_gadget_complete(dwc); |
| /* FALLTHROUGH */ |
| case USB_DR_MODE_HOST: |
| default: |
| break; |
| } |
| |
| spin_unlock_irqrestore(&dwc->lock, flags); |
| } |
| |
| static int dwc3_suspend(struct device *dev) |
| { |
| struct dwc3 *dwc = dev_get_drvdata(dev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dwc->lock, flags); |
| |
| switch (dwc->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| case USB_DR_MODE_OTG: |
| dwc3_gadget_suspend(dwc); |
| /* FALLTHROUGH */ |
| case USB_DR_MODE_HOST: |
| default: |
| /* do nothing */ |
| break; |
| } |
| |
| dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL); |
| spin_unlock_irqrestore(&dwc->lock, flags); |
| |
| usb_phy_shutdown(dwc->usb3_phy); |
| usb_phy_shutdown(dwc->usb2_phy); |
| phy_exit(dwc->usb2_generic_phy); |
| phy_exit(dwc->usb3_generic_phy); |
| |
| return 0; |
| } |
| |
| static int dwc3_resume(struct device *dev) |
| { |
| struct dwc3 *dwc = dev_get_drvdata(dev); |
| unsigned long flags; |
| int ret; |
| |
| usb_phy_init(dwc->usb3_phy); |
| usb_phy_init(dwc->usb2_phy); |
| ret = phy_init(dwc->usb2_generic_phy); |
| if (ret < 0) |
| return ret; |
| |
| ret = phy_init(dwc->usb3_generic_phy); |
| if (ret < 0) |
| goto err_usb2phy_init; |
| |
| spin_lock_irqsave(&dwc->lock, flags); |
| |
| dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl); |
| |
| switch (dwc->dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| case USB_DR_MODE_OTG: |
| dwc3_gadget_resume(dwc); |
| /* FALLTHROUGH */ |
| case USB_DR_MODE_HOST: |
| default: |
| /* do nothing */ |
| break; |
| } |
| |
| spin_unlock_irqrestore(&dwc->lock, flags); |
| |
| pm_runtime_disable(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| return 0; |
| |
| err_usb2phy_init: |
| phy_exit(dwc->usb2_generic_phy); |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops dwc3_dev_pm_ops = { |
| .prepare = dwc3_prepare, |
| .complete = dwc3_complete, |
| |
| SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume) |
| }; |
| |
| #define DWC3_PM_OPS &(dwc3_dev_pm_ops) |
| #else |
| #define DWC3_PM_OPS NULL |
| #endif |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id of_dwc3_match[] = { |
| { |
| .compatible = "snps,dwc3" |
| }, |
| { |
| .compatible = "synopsys,dwc3" |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, of_dwc3_match); |
| #endif |
| |
| static struct platform_driver dwc3_driver = { |
| .probe = dwc3_probe, |
| .remove = dwc3_remove, |
| .driver = { |
| .name = "dwc3", |
| .of_match_table = of_match_ptr(of_dwc3_match), |
| .pm = DWC3_PM_OPS, |
| }, |
| }; |
| |
| module_platform_driver(dwc3_driver); |
| |
| MODULE_ALIAS("platform:dwc3"); |
| MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver"); |