blob: 1eca1dbca7f1a10c94cb5bd6ae95a5cac8f35998 [file] [log] [blame]
/*
* drivers/net/gianfar_mii.c
*
* Gianfar Ethernet Driver -- MIIM bus implementation
* Provides Bus interface for MIIM regs
*
* Author: Andy Fleming
* Maintainer: Kumar Gala (kumar.gala@freescale.com)
*
* Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/version.h>
#include <asm/ocp.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include "gianfar.h"
#include "gianfar_mii.h"
/* Write value to the PHY at mii_id at register regnum,
* on the bus, waiting until the write is done before returning.
* All PHY configuration is done through the TSEC1 MIIM regs */
int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
{
struct gfar_mii *regs = bus->priv;
/* Set the PHY address and the register address we want to write */
gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
/* Write out the value we want */
gfar_write(&regs->miimcon, value);
/* Wait for the transaction to finish */
while (gfar_read(&regs->miimind) & MIIMIND_BUSY)
cpu_relax();
return 0;
}
/* Read the bus for PHY at addr mii_id, register regnum, and
* return the value. Clears miimcom first. All PHY
* configuration has to be done through the TSEC1 MIIM regs */
int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
struct gfar_mii *regs = bus->priv;
u16 value;
/* Set the PHY address and the register address we want to read */
gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
/* Clear miimcom, and then initiate a read */
gfar_write(&regs->miimcom, 0);
gfar_write(&regs->miimcom, MII_READ_COMMAND);
/* Wait for the transaction to finish */
while (gfar_read(&regs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
cpu_relax();
/* Grab the value of the register from miimstat */
value = gfar_read(&regs->miimstat);
return value;
}
/* Reset the MIIM registers, and wait for the bus to free */
int gfar_mdio_reset(struct mii_bus *bus)
{
struct gfar_mii *regs = bus->priv;
unsigned int timeout = PHY_INIT_TIMEOUT;
spin_lock_bh(&bus->mdio_lock);
/* Reset the management interface */
gfar_write(&regs->miimcfg, MIIMCFG_RESET);
/* Setup the MII Mgmt clock speed */
gfar_write(&regs->miimcfg, MIIMCFG_INIT_VALUE);
/* Wait until the bus is free */
while ((gfar_read(&regs->miimind) & MIIMIND_BUSY) &&
timeout--)
cpu_relax();
spin_unlock_bh(&bus->mdio_lock);
if(timeout <= 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n",
bus->name);
return -EBUSY;
}
return 0;
}
int gfar_mdio_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct gianfar_mdio_data *pdata;
struct gfar_mii *regs;
struct mii_bus *new_bus;
int err = 0;
if (NULL == dev)
return -EINVAL;
new_bus = kmalloc(sizeof(struct mii_bus), GFP_KERNEL);
if (NULL == new_bus)
return -ENOMEM;
new_bus->name = "Gianfar MII Bus",
new_bus->read = &gfar_mdio_read,
new_bus->write = &gfar_mdio_write,
new_bus->reset = &gfar_mdio_reset,
new_bus->id = pdev->id;
pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
if (NULL == pdata) {
printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
return -ENODEV;
}
/* Set the PHY base address */
regs = (struct gfar_mii *) ioremap(pdata->paddr,
sizeof (struct gfar_mii));
if (NULL == regs) {
err = -ENOMEM;
goto reg_map_fail;
}
new_bus->priv = regs;
new_bus->irq = pdata->irq;
new_bus->dev = dev;
dev_set_drvdata(dev, new_bus);
err = mdiobus_register(new_bus);
if (0 != err) {
printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
new_bus->name);
goto bus_register_fail;
}
return 0;
bus_register_fail:
iounmap((void *) regs);
reg_map_fail:
kfree(new_bus);
return err;
}
int gfar_mdio_remove(struct device *dev)
{
struct mii_bus *bus = dev_get_drvdata(dev);
mdiobus_unregister(bus);
dev_set_drvdata(dev, NULL);
iounmap((void *) (&bus->priv));
bus->priv = NULL;
kfree(bus);
return 0;
}
static struct device_driver gianfar_mdio_driver = {
.name = "fsl-gianfar_mdio",
.bus = &platform_bus_type,
.probe = gfar_mdio_probe,
.remove = gfar_mdio_remove,
};
int __init gfar_mdio_init(void)
{
return driver_register(&gianfar_mdio_driver);
}
void __exit gfar_mdio_exit(void)
{
driver_unregister(&gianfar_mdio_driver);
}