devfreq: spdm: Add snapshot of devfreq-spdm driver
This is a snapshot of the devfreq-spdm driver as of msm-3.18
'commit fa156811a90f ("ASoC: msm: enable group config for both
tx and rx").
Change-Id: I11fbcbfbca8b9bc30b9b43d08557fd5774e1444d
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
diff --git a/Documentation/devicetree/bindings/devfreq/devfreq-spdm.txt b/Documentation/devicetree/bindings/devfreq/devfreq-spdm.txt
new file mode 100644
index 0000000..16303f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/devfreq-spdm.txt
@@ -0,0 +1,84 @@
+MSM SPDM bandwidth monitor device
+
+devfreq-spdm is a device that represents a device that is monitored by the SPDM
+hardware to measure the traffic status of configured master ports on the bus.
+
+
+Required properties:
+-compatible: Must be "qcom,devfreq_spdm"
+-clock-names: Clocks used to measure current bus frequency.
+ Expected names are "cci_clk"
+-clocks: References to named clocks
+-qcom,spdm-client: Client id of the port being monitored
+-qcom,bw-upstep: Initial up vote size in MB/s
+-qcom,bw-dwnstep: Initial down vote size in MB/s
+-qcom,max-vote: Vote ceiling in MB/s
+-qcom,ports: SPDM ports used by this device
+-qcom,alpha-up: SPDM filter up alpha value
+-qcom,alpha-down: SPDM filter down alpha value
+-qcom,bucket-size: SPDM filter bucket size
+-qcom,pl-freqs: The driver supports different filter values at
+ three different performance levels. This value
+ defines the cut-over frequenices
+-qcom,reject-rate: Desired rejection rate used to calculate
+ SPDM threshold
+-qcom,response-time-us: Desired response time used to calculate
+ SPDM threshold
+-qcom,cci-response-time-us: Desired response time used to calculate
+ SPDM threshold when CCI is under heavy load
+-qcom,max-cci-freq: CCI frequency at which cci_response_time_us
+ is used
+-qcom,up-step-multp: used to increase rate of growth on up votes
+-qcom,spdm-interval: down-vote polling interval
+
+Example:
+devfreq_spdm_cpu {
+ compatible = "qcom,devfreq_spdm";
+ qcom,msm-bus,name = "devfreq_spdm";
+ qcom,msm-bus,num-cases = <2>;
+ qcom,msm-bus,num-paths = <1>;
+ qcom,msm-bus,vectors-KBps =
+ <1 512 0 0>,
+ <1 512 0 0>;
+ qcom,spdm-client = <0>;
+
+ clock-names = "cci_clk";
+ clocks = <&clock_cpu clk_cci_clk>;
+
+ qcom,bw-upstep = <100>;
+ qcom,bw-dwnstep = <100>;
+ qcom,max-vote = <10000>;
+ qcom,up-step-multp = <2>;
+ qcom,spdm-interval = <100>;
+
+ qcom,ports = <16>;
+ qcom,alpha-up = <7>;
+ qcom,alpha-down = <15>;
+ qcom,bucket-size = <8>;
+
+ /*max pl1 freq, max pl2 freq*/
+ qcom,pl-freqs = <149999999 150000000>;
+
+ /* pl1 low, pl1 high, pl2 low, pl2 high, pl3 low, pl3 high */
+ qcom,reject-rate = <5000 5000 5000 5000 5000 5000>;
+ /* pl1 low, pl1 high, pl2 low, pl2 high, pl3 low, pl3 high */
+ qcom,response-time-us = <220 220 2000 2000 900 900>;
+ /* pl1 low, pl1 high, pl2 low, pl2 high, pl3 low, pl3 high */
+ qcom,cci-response-time-us = <50 50 30 30 20 20>;
+ qcom,max-cci-freq = <600000000>;
+};
+
+This device is always used with the SPDM governor which requires a device tree
+entry to know what IRQ to respond to.
+
+Required properties:
+-compatible Must be "qcom,gov_spdm_hyp"
+-interrupt-names SPDM irq to handle. Name should be "spdm-irq"
+-interrupts The interrupt number the SPDM hw is assigned
+
+Example:
+devfreq_spdm_gov {
+ compatible = "qcom,gov_spdm_hyp";
+ interrupt-names = "spdm-irq";
+ interrupts = <0 192 0>;
+};
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index b8effac..3a2239c 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -135,6 +135,15 @@
it can conflict with existing profiling tools. This governor is
unlikely to be useful for other devices.
+config DEVFREQ_GOV_SPDM_HYP
+ bool "QTI SPDM Hypervisor Governor"
+ depends on ARCH_QCOM
+ help
+ Hypervisor based governor for CPU bandwidth voting
+ for QTI chipsets.
+ Sets the frequency using a "on-demand" algorithm.
+ This governor is unlikely to be useful for other devices.
+
config DEVFREQ_GOV_MEMLAT
tristate "HW monitor based governor for device BW"
depends on ARM_MEMLAT_MON
@@ -227,6 +236,24 @@
agnostic interface to so that some of the devfreq governors can be
shared across SoCs.
+config SPDM_SCM
+ bool "QTI SPDM SCM based call support"
+ depends on DEVFREQ_SPDM
+ help
+ SPDM driver support the dcvs algorithm logic being accessed via
+ scm or hvc calls. This adds the support for SPDM interaction to
+ tz via SCM based call. If not selected then Hypervior interaction
+ will be activated.
+
+config DEVFREQ_SPDM
+ bool "QTI SPDM based bandwidth voting"
+ depends on ARCH_QCOM
+ select DEVFREQ_GOV_SPDM_HYP
+ help
+ This adds the support for SPDM based bandwidth voting on QTI chipsets.
+ This driver allows any SPDM based client to vote for bandwidth.
+ Used with the QTI SPDM Hypervisor Governor.
+
source "drivers/devfreq/event/Kconfig"
endif # PM_DEVFREQ
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index f248e02..0202f66 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_QCOM_M4M_HWMON) += m4m-hwmon.o
obj-$(CONFIG_DEVFREQ_GOV_QCOM_BW_HWMON) += governor_bw_hwmon.o
obj-$(CONFIG_DEVFREQ_GOV_QCOM_CACHE_HWMON) += governor_cache_hwmon.o
+obj-$(CONFIG_DEVFREQ_GOV_SPDM_HYP) += governor_spdm_bw_hyp.o
obj-$(CONFIG_DEVFREQ_GOV_MEMLAT) += governor_memlat.o
# DEVFREQ Drivers
@@ -23,6 +24,7 @@
obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra-devfreq.o
obj-$(CONFIG_QCOM_DEVFREQ_DEVBW) += devfreq_devbw.o
obj-$(CONFIG_DEVFREQ_SIMPLE_DEV) += devfreq_simple_dev.o
+obj-$(CONFIG_DEVFREQ_SPDM) += devfreq_spdm.o devfreq_spdm_debugfs.o
# DEVFREQ Event Drivers
obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/
diff --git a/drivers/devfreq/devfreq_spdm.c b/drivers/devfreq/devfreq_spdm.c
new file mode 100644
index 0000000..3290a2a
--- /dev/null
+++ b/drivers/devfreq/devfreq_spdm.c
@@ -0,0 +1,444 @@
+/*
+ *Copyright (c) 2014-2015, 2017, The Linux Foundation. All rights reserved.
+ *
+ *This program is free software; you can redistribute it and/or modify
+ *it under the terms of the GNU General Public License version 2 and
+ *only version 2 as published by the Free Software Foundation.
+ *
+ *This program is distributed in the hope that it will be useful,
+ *but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/devfreq.h>
+#include <linux/init.h>
+#include <linux/ipc_logging.h>
+#include <linux/gfp.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/msm-bus.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "governor.h"
+#include "devfreq_spdm.h"
+
+static void *spdm_ipc_log_ctxt;
+#define DEVFREQ_SPDM_DEFAULT_WINDOW_MS 100
+#define SPDM_IPC_LOG_PAGES 5
+
+#define SPDM_IPC_LOG(x...) do { \
+ pr_debug(x); \
+ if (spdm_ipc_log_ctxt) \
+ ipc_log_string(spdm_ipc_log_ctxt, x); \
+} while (0)
+
+#define COPY_SIZE(x, y) ((x) <= (y) ? (x) : (y))
+
+static int change_bw(struct device *dev, unsigned long *freq, u32 flags)
+{
+ struct spdm_data *data = 0;
+ int i;
+ int next_idx;
+ int ret = 0;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (!dev || !freq)
+ return -EINVAL;
+
+ data = dev_get_drvdata(dev);
+ if (!data)
+ return -EINVAL;
+
+ if (data->devfreq->previous_freq == *freq)
+ goto update_thresholds;
+
+ next_idx = data->cur_idx + 1;
+ next_idx = next_idx % 2;
+
+ for (i = 0; i < data->pdata->usecase[next_idx].num_paths; i++)
+ data->pdata->usecase[next_idx].vectors[i].ab = (*freq) << 6;
+
+ data->cur_idx = next_idx;
+ ret = msm_bus_scale_client_update_request(data->bus_scale_client_id,
+ data->cur_idx);
+
+update_thresholds:
+ desc.arg[0] = SPDM_CMD_ENABLE;
+ desc.arg[1] = data->spdm_client;
+ desc.arg[2] = (clk_get_rate(data->cci_clk)) / 1000;
+ ext_status = spdm_ext_call(&desc, 3);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ return ret;
+}
+
+static int get_cur_bw(struct device *dev, unsigned long *freq)
+{
+ struct spdm_data *data = 0;
+
+ if (!dev || !freq)
+ return -EINVAL;
+
+ data = dev_get_drvdata(dev);
+ if (!data)
+ return -EINVAL;
+
+ *freq = data->pdata->usecase[data->cur_idx].vectors[0].ab >> 6;
+
+ return 0;
+}
+
+static int get_dev_status(struct device *dev, struct devfreq_dev_status *status)
+{
+ struct spdm_data *data = 0;
+ int ret;
+
+ if (!dev || !status)
+ return -EINVAL;
+
+ data = dev_get_drvdata(dev);
+ if (!data)
+ return -EINVAL;
+
+ /*
+ * determine if we want to go up or down based on the notification.
+ */
+ if (data->action == SPDM_UP)
+ status->busy_time = 255;
+ else
+ status->busy_time = 0;
+ status->total_time = 255;
+ ret = get_cur_bw(dev, &status->current_frequency);
+ if (ret)
+ return ret;
+
+ return 0;
+
+}
+
+static int populate_config_data(struct spdm_data *data,
+ struct platform_device *pdev)
+{
+ int ret = -EINVAL;
+ struct device_node *node = pdev->dev.of_node;
+ struct property *prop = 0;
+
+ ret = of_property_read_u32(node, "qcom,max-vote",
+ &data->config_data.max_vote);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(node, "qcom,bw-upstep",
+ &data->config_data.upstep);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(node, "qcom,bw-dwnstep",
+ &data->config_data.downstep);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(node, "qcom,alpha-up",
+ &data->config_data.aup);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(node, "qcom,alpha-down",
+ &data->config_data.adown);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(node, "qcom,bucket-size",
+ &data->config_data.bucket_size);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32_array(node, "qcom,pl-freqs",
+ data->config_data.pl_freqs,
+ SPDM_PL_COUNT - 1);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32_array(node, "qcom,reject-rate",
+ data->config_data.reject_rate,
+ SPDM_PL_COUNT * 2);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32_array(node, "qcom,response-time-us",
+ data->config_data.response_time_us,
+ SPDM_PL_COUNT * 2);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32_array(node, "qcom,cci-response-time-us",
+ data->config_data.cci_response_time_us,
+ SPDM_PL_COUNT * 2);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(node, "qcom,max-cci-freq",
+ &data->config_data.max_cci_freq);
+ if (ret)
+ return ret;
+ ret = of_property_read_u32(node, "qcom,up-step-multp",
+ &data->config_data.up_step_multp);
+ if (ret)
+ return ret;
+
+ prop = of_find_property(node, "qcom,ports", 0);
+ if (!prop)
+ return -EINVAL;
+ data->config_data.num_ports = prop->length / sizeof(u32);
+ data->config_data.ports =
+ devm_kzalloc(&pdev->dev, prop->length, GFP_KERNEL);
+ if (!data->config_data.ports)
+ return -ENOMEM;
+ ret = of_property_read_u32_array(node, "qcom,ports",
+ data->config_data.ports,
+ data->config_data.num_ports);
+ if (ret) {
+ devm_kfree(&pdev->dev, data->config_data.ports);
+ data->config_data.ports = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int populate_spdm_data(struct spdm_data *data,
+ struct platform_device *pdev)
+{
+ int ret = -EINVAL;
+ struct device_node *node = pdev->dev.of_node;
+
+ ret = populate_config_data(data, pdev);
+ if (ret)
+ return ret;
+
+ ret =
+ of_property_read_u32(node, "qcom,spdm-client", &data->spdm_client);
+ if (ret)
+ goto no_client;
+
+ ret = of_property_read_u32(node, "qcom,spdm-interval", &data->window);
+ if (ret)
+ data->window = DEVFREQ_SPDM_DEFAULT_WINDOW_MS;
+
+ data->pdata = msm_bus_cl_get_pdata(pdev);
+ if (!data->pdata) {
+ ret = -EINVAL;
+ goto no_pdata;
+ }
+
+ return 0;
+
+no_client:
+no_pdata:
+ devm_kfree(&pdev->dev, data->config_data.ports);
+ data->config_data.ports = NULL;
+ return ret;
+}
+
+#ifdef CONFIG_MSM_HVC
+int __spdm_hyp_call(struct spdm_args *args, int num_args)
+{
+ struct hvc_desc desc = { { 0 } };
+ int status;
+
+ memcpy(desc.arg, args->arg,
+ COPY_SIZE(sizeof(desc.arg), sizeof(args->arg)));
+ SPDM_IPC_LOG("hvc call fn:0x%x, cmd:%llu, num_args:%d\n",
+ HVC_FN_SIP(SPDM_HYP_FNID), desc.arg[0], num_args);
+
+ status = hvc(HVC_FN_SIP(SPDM_HYP_FNID), &desc);
+
+ memcpy(args->ret, desc.ret,
+ COPY_SIZE(sizeof(args->ret), sizeof(desc.ret)));
+ SPDM_IPC_LOG("hvc return fn:0x%x cmd:%llu Ret[0]:%llu Ret[1]:%llu\n",
+ HVC_FN_SIP(SPDM_HYP_FNID), desc.arg[0],
+ desc.ret[0], desc.ret[1]);
+ return status;
+}
+#endif
+
+int __spdm_scm_call(struct spdm_args *args, int num_args)
+{
+ int status = 0;
+
+ SPDM_IPC_LOG("%s:svc_id:%d,cmd_id:%d,cmd:%llu,num_args:%d\n",
+ __func__, SPDM_SCM_SVC_ID, SPDM_SCM_CMD_ID,
+ args->arg[0], num_args);
+
+ if (!is_scm_armv8()) {
+ status = scm_call(SPDM_SCM_SVC_ID, SPDM_SCM_CMD_ID, args->arg,
+ sizeof(args->arg), args->ret,
+ sizeof(args->ret));
+ } else {
+ struct scm_desc desc = {0};
+ /*
+ * Need to hard code this, this is a requirement from TZ syscall
+ * interface.
+ */
+ desc.arginfo = SCM_ARGS(6);
+ memcpy(desc.args, args->arg,
+ COPY_SIZE(sizeof(desc.args), sizeof(args->arg)));
+
+ status = scm_call2(SCM_SIP_FNID(SPDM_SCM_SVC_ID,
+ SPDM_SCM_CMD_ID), &desc);
+
+ memcpy(args->ret, desc.ret,
+ COPY_SIZE(sizeof(args->ret), sizeof(desc.ret)));
+ }
+ SPDM_IPC_LOG("%s:svc_id:%d,cmd_id:%d,cmd:%llu,Ret[0]:%llu,Ret[1]:%llu\n"
+ , __func__, SPDM_SCM_SVC_ID, SPDM_SCM_CMD_ID, args->arg[0],
+ args->ret[0], args->ret[1]);
+ return status;
+}
+
+static int probe(struct platform_device *pdev)
+{
+ struct spdm_data *data = 0;
+ int ret = -EINVAL;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->action = SPDM_DOWN;
+
+ platform_set_drvdata(pdev, data);
+
+ ret = populate_spdm_data(data, pdev);
+ if (ret)
+ goto bad_of;
+
+ desc.arg[0] = SPDM_CMD_GET_VERSION;
+ ext_status = spdm_ext_call(&desc, 1);
+ if (ext_status) {
+ pr_err("%s:External command %u failed with error %u\n",
+ __func__, (int)desc.arg[0], ext_status);
+ goto bad_of;
+ }
+
+ if (desc.ret[0] < SPDM_TZ_VERSION) {
+ pr_err("%s: Version mismatch expected 0x%x got 0x%x", __func__,
+ SPDM_TZ_VERSION, (int)desc.arg[0]);
+ goto bad_of;
+ }
+
+ data->bus_scale_client_id = msm_bus_scale_register_client(data->pdata);
+ if (!data->bus_scale_client_id) {
+ ret = -EINVAL;
+ goto no_bus_scaling;
+ }
+
+ data->cci_clk = clk_get(&pdev->dev, "cci_clk");
+ if (IS_ERR(data->cci_clk)) {
+ ret = PTR_ERR(data->cci_clk);
+ goto no_clock;
+ }
+
+ data->profile =
+ devm_kzalloc(&pdev->dev, sizeof(*(data->profile)), GFP_KERNEL);
+ if (!data->profile) {
+ ret = -ENOMEM;
+ goto no_profile;
+ }
+ data->profile->target = change_bw;
+ data->profile->get_dev_status = get_dev_status;
+ data->profile->get_cur_freq = get_cur_bw;
+ data->profile->polling_ms = data->window;
+
+ data->devfreq =
+ devfreq_add_device(&pdev->dev, data->profile, "spdm_bw_hyp", data);
+ if (IS_ERR(data->devfreq)) {
+ ret = PTR_ERR(data->devfreq);
+ goto no_spdm_device;
+ }
+
+ spdm_init_debugfs(&pdev->dev);
+ spdm_ipc_log_ctxt = ipc_log_context_create(SPDM_IPC_LOG_PAGES,
+ "devfreq_spdm", 0);
+
+ if (IS_ERR_OR_NULL(spdm_ipc_log_ctxt)) {
+ pr_err("%s: Failed to create IPC log context\n", __func__);
+ spdm_ipc_log_ctxt = NULL;
+ }
+
+
+ return 0;
+
+no_spdm_device:
+ devm_kfree(&pdev->dev, data->profile);
+no_profile:
+no_clock:
+ msm_bus_scale_unregister_client(data->bus_scale_client_id);
+no_bus_scaling:
+ devm_kfree(&pdev->dev, data->config_data.ports);
+bad_of:
+ devm_kfree(&pdev->dev, data);
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+}
+
+static int remove(struct platform_device *pdev)
+{
+ struct spdm_data *data = 0;
+
+ data = platform_get_drvdata(pdev);
+
+ spdm_remove_debugfs(data);
+
+ if (data->devfreq)
+ devfreq_remove_device(data->devfreq);
+
+ if (data->profile)
+ devm_kfree(&pdev->dev, data->profile);
+
+ if (data->bus_scale_client_id)
+ msm_bus_scale_unregister_client(data->bus_scale_client_id);
+
+ if (data->config_data.ports)
+ devm_kfree(&pdev->dev, data->config_data.ports);
+
+ devm_kfree(&pdev->dev, data);
+ platform_set_drvdata(pdev, NULL);
+
+ if (spdm_ipc_log_ctxt)
+ ipc_log_context_destroy(spdm_ipc_log_ctxt);
+
+ return 0;
+}
+
+static const struct of_device_id devfreq_spdm_match[] = {
+ {.compatible = "qcom,devfreq_spdm"},
+ {}
+};
+
+static struct platform_driver devfreq_spdm_drvr = {
+ .driver = {
+ .name = "devfreq_spdm",
+ .owner = THIS_MODULE,
+ .of_match_table = devfreq_spdm_match,
+ },
+ .probe = probe,
+ .remove = remove,
+};
+
+static int __init devfreq_spdm_init(void)
+{
+ return platform_driver_register(&devfreq_spdm_drvr);
+}
+
+module_init(devfreq_spdm_init);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/devfreq/devfreq_spdm.h b/drivers/devfreq/devfreq_spdm.h
new file mode 100644
index 0000000..1e5ab03
--- /dev/null
+++ b/drivers/devfreq/devfreq_spdm.h
@@ -0,0 +1,131 @@
+/*
+ *Copyright (c) 2014-2015, 2017, The Linux Foundation. All rights reserved.
+ *
+ *This program is free software; you can redistribute it and/or modify
+ *it under the terms of the GNU General Public License version 2 and
+ *only version 2 as published by the Free Software Foundation.
+ *
+ *This program is distributed in the hope that it will be useful,
+ *but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *GNU General Public License for more details.
+ */
+
+#ifndef DEVFREQ_SPDM_H
+#define DEVFREQ_SPDM_H
+
+#include <linux/list.h>
+#ifdef CONFIG_MSM_HVC
+#include <soc/qcom/hvc.h>
+#endif
+#include <soc/qcom/scm.h>
+
+enum pl_levels { SPDM_PL1, SPDM_PL2, SPDM_PL3, SPDM_PL_COUNT };
+enum actions { SPDM_UP, SPDM_DOWN };
+enum spdm_client { SPDM_CLIENT_CPU, SPDM_CLIENT_GPU, SPDM_CLIENT_COUNT };
+
+struct spdm_config_data {
+ /* in MB/s */
+ u32 upstep;
+ u32 downstep;
+ u32 up_step_multp;
+
+ u32 num_ports;
+ u32 *ports;
+ u32 aup;
+ u32 adown;
+ u32 bucket_size;
+
+ /*
+ * If We define n PL levels we need n-1 frequencies to tell
+ * where to change from one pl to another
+ */
+ /* hz */
+ u32 pl_freqs[SPDM_PL_COUNT - 1];
+ /*
+ * We have a low threshold and a high threhold for each pl to support
+ * the two port solution so we need twice as many entries as
+ * performance levels
+ */
+ /* in 100th's of a percent */
+ u32 reject_rate[SPDM_PL_COUNT * 2];
+ u32 response_time_us[SPDM_PL_COUNT * 2];
+ u32 cci_response_time_us[SPDM_PL_COUNT * 2];
+ /* hz */
+ u32 max_cci_freq;
+ /* in MB/s */
+ u32 max_vote;
+
+};
+
+struct spdm_data {
+ /* bus scaling data */
+ int cur_idx;
+ struct msm_bus_scale_pdata *pdata;
+ u32 bus_scale_client_id;
+ /* in mb/s */
+ u32 new_bw;
+
+ /* devfreq data */
+ struct devfreq *devfreq;
+ struct devfreq_dev_profile *profile;
+ unsigned long action;
+ int window;
+ struct clk *cci_clk;
+
+ /* spdm hw/gov data */
+ struct spdm_config_data config_data;
+
+ enum spdm_client spdm_client;
+ /* list used by governor to keep track of spdm devices */
+ struct list_head list;
+
+ struct dentry *debugfs_dir;
+
+ bool enabled;
+};
+
+extern void spdm_init_debugfs(struct device *dev);
+extern void spdm_remove_debugfs(struct spdm_data *data);
+
+#define SPDM_HYP_FNID 5
+#define SPDM_SCM_SVC_ID 0x9
+#define SPDM_SCM_CMD_ID 0x4
+#define SPDM_TZ_VERSION 0x20000 /* TZ SPDM driver version */
+/* SPDM CMD ID's for hypervisor/SCM */
+#define SPDM_CMD_GET_VERSION 0
+#define SPDM_CMD_GET_BW_ALL 1
+#define SPDM_CMD_GET_BW_SPECIFIC 2
+#define SPDM_CMD_ENABLE 3
+#define SPDM_CMD_DISABLE 4
+#define SPDM_CMD_CFG_PORTS 5
+#define SPDM_CMD_CFG_FLTR 6
+#define SPDM_CMD_CFG_PL 7
+#define SPDM_CMD_CFG_REJRATE_LOW 8
+#define SPDM_CMD_CFG_REJRATE_MED 9
+#define SPDM_CMD_CFG_REJRATE_HIGH 10
+#define SPDM_CMD_CFG_RESPTIME_LOW 11
+#define SPDM_CMD_CFG_RESPTIME_MED 12
+#define SPDM_CMD_CFG_RESPTIME_HIGH 13
+#define SPDM_CMD_CFG_CCIRESPTIME_LOW 14
+#define SPDM_CMD_CFG_CCIRESPTIME_MED 15
+#define SPDM_CMD_CFG_CCIRESPTIME_HIGH 16
+#define SPDM_CMD_CFG_MAXCCI 17
+#define SPDM_CMD_CFG_VOTES 18
+
+#define SPDM_MAX_ARGS 6
+#define SPDM_MAX_RETS 3
+
+struct spdm_args {
+ u64 arg[SPDM_MAX_ARGS];
+ u64 ret[SPDM_MAX_RETS];
+};
+
+#ifdef CONFIG_SPDM_SCM
+extern int __spdm_scm_call(struct spdm_args *args, int num_args);
+#define spdm_ext_call __spdm_scm_call
+#else
+extern int __spdm_hyp_call(struct spdm_args *args, int num_args);
+#define spdm_ext_call __spdm_hyp_call
+#endif
+#endif
diff --git a/drivers/devfreq/devfreq_spdm_debugfs.c b/drivers/devfreq/devfreq_spdm_debugfs.c
new file mode 100644
index 0000000..4e49d5b
--- /dev/null
+++ b/drivers/devfreq/devfreq_spdm_debugfs.c
@@ -0,0 +1,848 @@
+/*
+ *Copyright (c) 2014-2015, 2017, The Linux Foundation. All rights reserved.
+ *
+ *This program is free software; you can redistribute it and/or modify
+ *it under the terms of the GNU General Public License version 2 and
+ *only version 2 as published by the Free Software Foundation.
+ *
+ *This program is distributed in the hope that it will be useful,
+ *but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *GNU General Public License for more details.
+ */
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/msm-bus.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include "devfreq_spdm.h"
+#include "governor.h"
+
+static int spdm_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static char buf[PAGE_SIZE];
+
+static ssize_t enable_write(struct file *file, const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i;
+ int next_idx;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ goto err;
+ size = -EINVAL;
+ }
+
+ if (sscanf(buf, "%u\n", &i) != 1) {
+ size = -EINVAL;
+ goto err;
+ }
+ i = !!i;
+
+ if (i == spdm_data->enabled)
+ goto out;
+
+ spdm_data->devfreq->governor->event_handler(spdm_data->devfreq,
+ i ? DEVFREQ_GOV_START :
+ DEVFREQ_GOV_STOP, NULL);
+
+ if (!i) {
+ next_idx = spdm_data->cur_idx + 1;
+ next_idx = next_idx % 2;
+
+ for (i = 0; i < spdm_data->pdata->usecase[next_idx].num_paths;
+ i++)
+ spdm_data->pdata->usecase[next_idx].vectors[i].ab = 0;
+
+ spdm_data->cur_idx = next_idx;
+ msm_bus_scale_client_update_request
+ (spdm_data->bus_scale_client_id, spdm_data->cur_idx);
+ }
+
+out:
+ *offset += size;
+err:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t enable_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int len = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ len = scnprintf(buf, size, "%u\n", spdm_data->enabled);
+ len = simple_read_from_buffer(data, size, offset, buf, len);
+
+ memset(buf, 0, sizeof(buf));
+ return len;
+}
+
+static const struct file_operations enable_fops = {
+ .open = spdm_open,
+ .write = enable_write,
+ .read = enable_read,
+};
+
+static ssize_t pl_write(struct file *file, const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+ int i;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ if (sscanf(buf, "%u %u\n", &spdm_data->config_data.pl_freqs[0],
+ &spdm_data->config_data.pl_freqs[1]) != 2) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_PL;
+ desc.arg[1] = spdm_data->spdm_client;
+ for (i = 0; i < SPDM_PL_COUNT - 1; i++)
+ desc.arg[i+2] = spdm_data->config_data.pl_freqs[i];
+ ext_status = spdm_ext_call(&desc, SPDM_PL_COUNT + 1);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+
+}
+
+static ssize_t pl_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u\n", spdm_data->config_data.pl_freqs[0],
+ spdm_data->config_data.pl_freqs[1]);
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations pl_fops = {
+ .open = spdm_open,
+ .write = pl_write,
+ .read = pl_read,
+};
+
+static ssize_t rejrate_low_write(struct file *file, const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ if (sscanf(buf, "%u %u\n", &spdm_data->config_data.reject_rate[0],
+ &spdm_data->config_data.reject_rate[1]) != 2) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_REJRATE_LOW;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.reject_rate[0];
+ desc.arg[3] = spdm_data->config_data.reject_rate[1];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t rejrate_low_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u\n",
+ spdm_data->config_data.reject_rate[0],
+ spdm_data->config_data.reject_rate[1]);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations rrl_fops = {
+ .open = spdm_open,
+ .write = rejrate_low_write,
+ .read = rejrate_low_read,
+};
+
+static ssize_t rejrate_med_write(struct file *file, const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (sscanf(buf, "%u %u\n", &spdm_data->config_data.reject_rate[2],
+ &spdm_data->config_data.reject_rate[3]) != 2) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_REJRATE_MED;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.reject_rate[2];
+ desc.arg[3] = spdm_data->config_data.reject_rate[3];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t rejrate_med_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u\n",
+ spdm_data->config_data.reject_rate[2],
+ spdm_data->config_data.reject_rate[3]);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations rrm_fops = {
+ .open = spdm_open,
+ .write = rejrate_med_write,
+ .read = rejrate_med_read,
+};
+
+static ssize_t rejrate_high_write(struct file *file, const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (sscanf(buf, "%u %u\n", &spdm_data->config_data.reject_rate[4],
+ &spdm_data->config_data.reject_rate[5]) != 2) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_REJRATE_HIGH;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.reject_rate[4];
+ desc.arg[3] = spdm_data->config_data.reject_rate[5];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t rejrate_high_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u\n",
+ spdm_data->config_data.reject_rate[4],
+ spdm_data->config_data.reject_rate[5]);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations rrh_fops = {
+ .open = spdm_open,
+ .write = rejrate_high_write,
+ .read = rejrate_high_read,
+};
+
+static ssize_t resptime_low_write(struct file *file, const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (sscanf(buf, "%u %u\n", &spdm_data->config_data.response_time_us[0],
+ &spdm_data->config_data.response_time_us[1]) != 2) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_RESPTIME_LOW;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.response_time_us[0];
+ desc.arg[3] = spdm_data->config_data.response_time_us[1];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t resptime_low_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u\n",
+ spdm_data->config_data.response_time_us[0],
+ spdm_data->config_data.response_time_us[1]);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations rtl_fops = {
+ .open = spdm_open,
+ .write = resptime_low_write,
+ .read = resptime_low_read,
+};
+
+static ssize_t resptime_med_write(struct file *file, const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (sscanf(buf, "%u %u\n", &spdm_data->config_data.response_time_us[2],
+ &spdm_data->config_data.response_time_us[3]) != 2) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_RESPTIME_MED;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.response_time_us[2];
+ desc.arg[3] = spdm_data->config_data.response_time_us[3];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t resptime_med_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u\n",
+ spdm_data->config_data.response_time_us[2],
+ spdm_data->config_data.response_time_us[3]);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations rtm_fops = {
+ .open = spdm_open,
+ .write = resptime_med_write,
+ .read = resptime_med_read,
+};
+
+static ssize_t resptime_high_write(struct file *file, const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (sscanf(buf, "%u %u\n", &spdm_data->config_data.response_time_us[4],
+ &spdm_data->config_data.response_time_us[5]) != 2) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_RESPTIME_HIGH;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.response_time_us[4];
+ desc.arg[3] = spdm_data->config_data.response_time_us[5];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t resptime_high_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u\n",
+ spdm_data->config_data.response_time_us[4],
+ spdm_data->config_data.response_time_us[5]);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations rth_fops = {
+ .open = spdm_open,
+ .write = resptime_high_write,
+ .read = resptime_high_read,
+};
+
+static ssize_t cciresptime_low_write(struct file *file,
+ const char __user *data, size_t size,
+ loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (sscanf(buf, "%u %u\n",
+ &spdm_data->config_data.cci_response_time_us[0],
+ &spdm_data->config_data.cci_response_time_us[1]) != 2) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_CCIRESPTIME_LOW;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.cci_response_time_us[0];
+ desc.arg[3] = spdm_data->config_data.cci_response_time_us[1];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t cciresptime_low_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u\n",
+ spdm_data->config_data.cci_response_time_us[0],
+ spdm_data->config_data.cci_response_time_us[1]);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations ccil_fops = {
+ .open = spdm_open,
+ .write = cciresptime_low_write,
+ .read = cciresptime_low_read,
+};
+
+static ssize_t cciresptime_med_write(struct file *file,
+ const char __user *data, size_t size,
+ loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (sscanf(buf, "%u %u\n",
+ &spdm_data->config_data.cci_response_time_us[2],
+ &spdm_data->config_data.cci_response_time_us[3]) != 2) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_CCIRESPTIME_MED;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.cci_response_time_us[2];
+ desc.arg[3] = spdm_data->config_data.cci_response_time_us[3];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t cciresptime_med_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u\n",
+ spdm_data->config_data.cci_response_time_us[2],
+ spdm_data->config_data.cci_response_time_us[3]);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations ccim_fops = {
+ .open = spdm_open,
+ .write = cciresptime_med_write,
+ .read = cciresptime_med_read,
+};
+
+static ssize_t cciresptime_high_write(struct file *file,
+ const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (sscanf(buf, "%u %u\n",
+ &spdm_data->config_data.cci_response_time_us[4],
+ &spdm_data->config_data.cci_response_time_us[5]) != 2){
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_CCIRESPTIME_HIGH;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.cci_response_time_us[4];
+ desc.arg[3] = spdm_data->config_data.cci_response_time_us[5];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t cciresptime_high_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u\n",
+ spdm_data->config_data.cci_response_time_us[4],
+ spdm_data->config_data.cci_response_time_us[5]);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations ccih_fops = {
+ .open = spdm_open,
+ .write = cciresptime_high_write,
+ .read = cciresptime_high_read,
+};
+
+static ssize_t cci_max_write(struct file *file, const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (sscanf(buf, "%u\n", &spdm_data->config_data.max_cci_freq) != 1) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_MAXCCI;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.max_cci_freq;
+ ext_status = spdm_ext_call(&desc, 3);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t cci_max_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u\n", spdm_data->config_data.max_cci_freq);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations ccimax_fops = {
+ .open = spdm_open,
+ .write = cci_max_write,
+ .read = cci_max_read,
+};
+
+static ssize_t vote_cfg_write(struct file *file, const char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ if (copy_from_user(buf, data, size)) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (sscanf(buf, "%u %u %u %u\n", &spdm_data->config_data.upstep,
+ &spdm_data->config_data.downstep,
+ &spdm_data->config_data.max_vote,
+ &spdm_data->config_data.up_step_multp) != 4) {
+ size = -EINVAL;
+ goto out;
+ }
+
+ desc.arg[0] = SPDM_CMD_CFG_VOTES;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.upstep;
+ desc.arg[3] = spdm_data->config_data.downstep;
+ desc.arg[4] = spdm_data->config_data.max_vote;
+ desc.arg[5] = spdm_data->config_data.up_step_multp;
+ ext_status = spdm_ext_call(&desc, 6);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ *offset += size;
+out:
+ memset(buf, 0, sizeof(buf));
+ return size;
+}
+
+static ssize_t vote_cfg_read(struct file *file, char __user *data,
+ size_t size, loff_t *offset)
+{
+ struct spdm_data *spdm_data = file->private_data;
+ int i = 32;
+
+ if (size > sizeof(buf))
+ return -EINVAL;
+
+ i = scnprintf(buf, size, "%u %u %u %u\n",
+ spdm_data->config_data.upstep,
+ spdm_data->config_data.downstep,
+ spdm_data->config_data.max_vote,
+ spdm_data->config_data.up_step_multp);
+
+ i = simple_read_from_buffer(data, size, offset, buf, i);
+ memset(buf, 0, sizeof(buf));
+ return i;
+}
+
+static const struct file_operations vote_fops = {
+ .open = spdm_open,
+ .write = vote_cfg_write,
+ .read = vote_cfg_read,
+};
+
+void spdm_init_debugfs(struct device *dev)
+{
+ struct spdm_data *data = 0;
+
+ data = dev_get_drvdata(dev);
+ data->debugfs_dir = debugfs_create_dir(dev_name(dev), NULL);
+
+ debugfs_create_file("enable", 0600, data->debugfs_dir, data,
+ &enable_fops);
+ debugfs_create_file("pl_freqs", 0600, data->debugfs_dir, data,
+ &pl_fops);
+ debugfs_create_file("rej_rate_low", 0600, data->debugfs_dir, data,
+ &rrl_fops);
+ debugfs_create_file("rej_rate_med", 0600, data->debugfs_dir, data,
+ &rrm_fops);
+ debugfs_create_file("rej_rate_high", 0600, data->debugfs_dir, data,
+ &rrh_fops);
+ debugfs_create_file("resp_time_low", 0600, data->debugfs_dir, data,
+ &rtl_fops);
+ debugfs_create_file("resp_time_med", 0600, data->debugfs_dir, data,
+ &rtm_fops);
+ debugfs_create_file("resp_time_high", 0600, data->debugfs_dir, data,
+ &rth_fops);
+ debugfs_create_file("cci_resp_time_low", 0600, data->debugfs_dir, data,
+ &ccil_fops);
+ debugfs_create_file("cci_resp_time_med", 0600, data->debugfs_dir, data,
+ &ccim_fops);
+ debugfs_create_file("cci_resp_time_high", 0600, data->debugfs_dir,
+ data, &ccih_fops);
+ debugfs_create_file("cci_max", 0600, data->debugfs_dir, data,
+ &ccimax_fops);
+ debugfs_create_file("vote_cfg", 0600, data->debugfs_dir, data,
+ &vote_fops);
+}
+
+void spdm_remove_debugfs(struct spdm_data *data)
+{
+ debugfs_remove_recursive(data->debugfs_dir);
+}
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/devfreq/governor_spdm_bw_hyp.c b/drivers/devfreq/governor_spdm_bw_hyp.c
new file mode 100644
index 0000000..5751ab6
--- /dev/null
+++ b/drivers/devfreq/governor_spdm_bw_hyp.c
@@ -0,0 +1,419 @@
+/*
+ *Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
+ *
+ *This program is free software; you can redistribute it and/or modify
+ *it under the terms of the GNU General Public License version 2 and
+ *only version 2 as published by the Free Software Foundation.
+ *
+ *This program is distributed in the hope that it will be useful,
+ *but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *GNU General Public License for more details.
+ */
+
+#include <linux/devfreq.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <soc/qcom/rpm-smd.h>
+#include "governor.h"
+#include "devfreq_spdm.h"
+
+enum msm_spdm_rt_res {
+ SPDM_RES_ID = 1,
+ SPDM_RES_TYPE = 0x63707362,
+ SPDM_KEY = 0x00006e65,
+ SPDM_SIZE = 4,
+};
+
+static LIST_HEAD(devfreqs);
+static DEFINE_MUTEX(devfreqs_lock);
+
+static int enable_clocks(void)
+{
+ struct msm_rpm_request *rpm_req;
+ int id;
+ const int one = 1;
+
+ rpm_req = msm_rpm_create_request(MSM_RPM_CTX_ACTIVE_SET, SPDM_RES_TYPE,
+ SPDM_RES_ID, 1);
+ if (!rpm_req)
+ return -ENODEV;
+ msm_rpm_add_kvp_data(rpm_req, SPDM_KEY, (const uint8_t *)&one,
+ sizeof(int));
+ id = msm_rpm_send_request(rpm_req);
+ msm_rpm_wait_for_ack(id);
+ msm_rpm_free_request(rpm_req);
+
+ return 0;
+}
+
+static int disable_clocks(void)
+{
+ struct msm_rpm_request *rpm_req;
+ int id;
+ const int zero = 0;
+
+ rpm_req = msm_rpm_create_request(MSM_RPM_CTX_ACTIVE_SET, SPDM_RES_TYPE,
+ SPDM_RES_ID, 1);
+ if (!rpm_req)
+ return -ENODEV;
+ msm_rpm_add_kvp_data(rpm_req, SPDM_KEY, (const uint8_t *)&zero,
+ sizeof(int));
+ id = msm_rpm_send_request(rpm_req);
+ msm_rpm_wait_for_ack(id);
+ msm_rpm_free_request(rpm_req);
+
+ return 0;
+}
+
+static irqreturn_t threaded_isr(int irq, void *dev_id)
+{
+ struct spdm_data *data;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+
+ /* call hyp to get bw_vote */
+ desc.arg[0] = SPDM_CMD_GET_BW_ALL;
+ ext_status = spdm_ext_call(&desc, 1);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ mutex_lock(&devfreqs_lock);
+ list_for_each_entry(data, &devfreqs, list) {
+ if (data == NULL || data->devfreq == NULL) {
+ pr_err("Spurious interrupts\n");
+ break;
+ }
+ if (data->spdm_client == desc.ret[0]) {
+ devfreq_monitor_suspend(data->devfreq);
+ mutex_lock(&data->devfreq->lock);
+ data->action = SPDM_UP;
+ data->new_bw =
+ (desc.ret[1] * 1000) >> 6;
+ update_devfreq(data->devfreq);
+ data->action = SPDM_DOWN;
+ mutex_unlock(&data->devfreq->lock);
+ devfreq_monitor_resume(data->devfreq);
+ break;
+ }
+ }
+ mutex_unlock(&devfreqs_lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t isr(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
+static int gov_spdm_hyp_target_bw(struct devfreq *devfreq, unsigned long *freq)
+{
+ struct devfreq_dev_status status;
+ int ret = -EINVAL;
+ int usage;
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+ u64 bw_ret;
+
+ if (!devfreq || !devfreq->profile || !devfreq->profile->get_dev_status)
+ return ret;
+
+ ret = devfreq->profile->get_dev_status(devfreq->dev.parent, &status);
+ if (ret)
+ return ret;
+
+ usage = (status.busy_time * 100) / status.total_time;
+
+ if (usage > 0) {
+ /* up was already called as part of hyp, so just use the
+ * already stored values.
+ */
+ *freq = ((struct spdm_data *)devfreq->data)->new_bw;
+ } else {
+ desc.arg[0] = SPDM_CMD_GET_BW_SPECIFIC;
+ desc.arg[1] = ((struct spdm_data *)devfreq->data)->spdm_client;
+ ext_status = spdm_ext_call(&desc, 2);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ bw_ret = desc.ret[0] * 1000;
+ *freq = bw_ret >> 6;
+ }
+
+ return 0;
+}
+
+static int gov_spdm_hyp_eh(struct devfreq *devfreq, unsigned int event,
+ void *data)
+{
+ struct spdm_args desc = { { 0 } };
+ int ext_status = 0;
+ struct spdm_data *spdm_data = (struct spdm_data *)devfreq->data;
+ int i;
+
+ switch (event) {
+ case DEVFREQ_GOV_START:
+ mutex_lock(&devfreqs_lock);
+ list_add(&spdm_data->list, &devfreqs);
+ mutex_unlock(&devfreqs_lock);
+ /* call hyp with config data */
+ desc.arg[0] = SPDM_CMD_CFG_PORTS;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.num_ports;
+ for (i = 0; i < spdm_data->config_data.num_ports; i++)
+ desc.arg[i+3] = spdm_data->config_data.ports[i];
+ ext_status = spdm_ext_call(&desc,
+ spdm_data->config_data.num_ports + 3);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+
+ desc.arg[0] = SPDM_CMD_CFG_FLTR;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.aup;
+ desc.arg[3] = spdm_data->config_data.adown;
+ desc.arg[4] = spdm_data->config_data.bucket_size;
+ ext_status = spdm_ext_call(&desc, 5);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+
+ desc.arg[0] = SPDM_CMD_CFG_PL;
+ desc.arg[1] = spdm_data->spdm_client;
+ for (i = 0; i < SPDM_PL_COUNT - 1; i++)
+ desc.arg[i+2] = spdm_data->config_data.pl_freqs[i];
+ ext_status = spdm_ext_call(&desc, SPDM_PL_COUNT + 1);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+
+ desc.arg[0] = SPDM_CMD_CFG_REJRATE_LOW;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.reject_rate[0];
+ desc.arg[3] = spdm_data->config_data.reject_rate[1];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ desc.arg[0] = SPDM_CMD_CFG_REJRATE_MED;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.reject_rate[2];
+ desc.arg[3] = spdm_data->config_data.reject_rate[3];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ desc.arg[0] = SPDM_CMD_CFG_REJRATE_HIGH;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.reject_rate[4];
+ desc.arg[3] = spdm_data->config_data.reject_rate[5];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+
+ desc.arg[0] = SPDM_CMD_CFG_RESPTIME_LOW;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.response_time_us[0];
+ desc.arg[3] = spdm_data->config_data.response_time_us[1];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ desc.arg[0] = SPDM_CMD_CFG_RESPTIME_MED;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.response_time_us[2];
+ desc.arg[3] = spdm_data->config_data.response_time_us[3];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ desc.arg[0] = SPDM_CMD_CFG_RESPTIME_HIGH;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.response_time_us[4];
+ desc.arg[3] = spdm_data->config_data.response_time_us[5];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+
+ desc.arg[0] = SPDM_CMD_CFG_CCIRESPTIME_LOW;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.cci_response_time_us[0];
+ desc.arg[3] = spdm_data->config_data.cci_response_time_us[1];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ desc.arg[0] = SPDM_CMD_CFG_CCIRESPTIME_MED;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.cci_response_time_us[2];
+ desc.arg[3] = spdm_data->config_data.cci_response_time_us[3];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ desc.arg[0] = SPDM_CMD_CFG_CCIRESPTIME_HIGH;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.cci_response_time_us[4];
+ desc.arg[3] = spdm_data->config_data.cci_response_time_us[5];
+ ext_status = spdm_ext_call(&desc, 4);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+
+ desc.arg[0] = SPDM_CMD_CFG_MAXCCI;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.max_cci_freq;
+ ext_status = spdm_ext_call(&desc, 3);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+
+ desc.arg[0] = SPDM_CMD_CFG_VOTES;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = spdm_data->config_data.upstep;
+ desc.arg[3] = spdm_data->config_data.downstep;
+ desc.arg[4] = spdm_data->config_data.max_vote;
+ desc.arg[5] = spdm_data->config_data.up_step_multp;
+ ext_status = spdm_ext_call(&desc, 6);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+
+ /* call hyp enable/commit */
+ desc.arg[0] = SPDM_CMD_ENABLE;
+ desc.arg[1] = spdm_data->spdm_client;
+ desc.arg[2] = 0;
+ ext_status = spdm_ext_call(&desc, 3);
+ if (ext_status) {
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ mutex_lock(&devfreqs_lock);
+ /*
+ * the spdm device probe will fail so remove it from
+ * the list to prevent accessing a deleted pointer in
+ * the future
+ */
+ list_del(&spdm_data->list);
+ mutex_unlock(&devfreqs_lock);
+ return -EINVAL;
+ }
+ spdm_data->enabled = true;
+ devfreq_monitor_start(devfreq);
+ break;
+
+ case DEVFREQ_GOV_STOP:
+ devfreq_monitor_stop(devfreq);
+ /* find devfreq in list and remove it */
+ mutex_lock(&devfreqs_lock);
+ list_del(&spdm_data->list);
+ mutex_unlock(&devfreqs_lock);
+
+ /* call hypvervisor to disable */
+ desc.arg[0] = SPDM_CMD_DISABLE;
+ desc.arg[1] = spdm_data->spdm_client;
+ ext_status = spdm_ext_call(&desc, 2);
+ if (ext_status)
+ pr_err("External command %u failed with error %u",
+ (int)desc.arg[0], ext_status);
+ spdm_data->enabled = false;
+ break;
+
+ case DEVFREQ_GOV_INTERVAL:
+ devfreq_interval_update(devfreq, (unsigned int *)data);
+ break;
+
+ case DEVFREQ_GOV_SUSPEND:
+ devfreq_monitor_suspend(devfreq);
+ break;
+
+ case DEVFREQ_GOV_RESUME:
+ devfreq_monitor_resume(devfreq);
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static struct devfreq_governor spdm_hyp_gov = {
+ .name = "spdm_bw_hyp",
+ .get_target_freq = gov_spdm_hyp_target_bw,
+ .event_handler = gov_spdm_hyp_eh,
+};
+
+static int probe(struct platform_device *pdev)
+{
+ int ret = -EINVAL;
+ int *irq = 0;
+
+ irq = devm_kzalloc(&pdev->dev, sizeof(int), GFP_KERNEL);
+ if (!irq)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, irq);
+
+ ret = devfreq_add_governor(&spdm_hyp_gov);
+ if (ret)
+ goto nogov;
+
+ *irq = platform_get_irq_byname(pdev, "spdm-irq");
+ ret = request_threaded_irq(*irq, isr, threaded_isr,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ spdm_hyp_gov.name, pdev);
+ if (ret)
+ goto no_irq;
+
+ enable_clocks();
+ return 0;
+
+no_irq:
+ devfreq_remove_governor(&spdm_hyp_gov);
+nogov:
+ devm_kfree(&pdev->dev, irq);
+ return ret;
+}
+
+static int remove(struct platform_device *pdev)
+{
+ int *irq = 0;
+
+ disable_clocks();
+ irq = platform_get_drvdata(pdev);
+ free_irq(*irq, pdev);
+ devfreq_remove_governor(&spdm_hyp_gov);
+ devm_kfree(&pdev->dev, irq);
+ return 0;
+}
+
+static const struct of_device_id gov_spdm_match[] = {
+ {.compatible = "qcom,gov_spdm_hyp"},
+ {}
+};
+
+static struct platform_driver gov_spdm_hyp_drvr = {
+ .driver = {
+ .name = "gov_spdm_hyp",
+ .owner = THIS_MODULE,
+ .of_match_table = gov_spdm_match,
+ },
+ .probe = probe,
+ .remove = remove,
+};
+
+static int __init governor_spdm_bw_hyp(void)
+{
+ return platform_driver_register(&gov_spdm_hyp_drvr);
+}
+
+module_init(governor_spdm_bw_hyp);
+
+MODULE_LICENSE("GPL v2");