MIPS: BMIPS: Add early CPU initialization code
Port the stblinux-3.3 code to perform a bunch of CPU-specific initialization,
make it compatible with run-time detection of the CPU, and unroll the
brcmstb-specific macros: BDEV_RB(), BDEV_UNSET.
The "pref 30" disabling is done as a quirk. This is a preliminary change to
allow the use of the "rotr" instruction gated by cpu_has_rixi.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: pgynther@google.com
Cc: paul.burton@imgtec.com
Cc: ddaney.cavm@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12504/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 6d11788..e02addc 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -566,3 +566,90 @@
* once the wired entries are present.
*/
}
+
+void __init bmips_cpu_setup(void)
+{
+ void __iomem __maybe_unused *cbr = BMIPS_GET_CBR();
+ u32 __maybe_unused cfg;
+
+ switch (current_cpu_type()) {
+ case CPU_BMIPS3300:
+ /* Set BIU to async mode */
+ set_c0_brcm_bus_pll(BIT(22));
+ __sync();
+
+ /* put the BIU back in sync mode */
+ clear_c0_brcm_bus_pll(BIT(22));
+
+ /* clear BHTD to enable branch history table */
+ clear_c0_brcm_reset(BIT(16));
+
+ /* Flush and enable RAC */
+ cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
+ __raw_writel(cfg | 0x100, BMIPS_RAC_CONFIG);
+ __raw_readl(cbr + BMIPS_RAC_CONFIG);
+
+ cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
+ __raw_writel(cfg | 0xf, BMIPS_RAC_CONFIG);
+ __raw_readl(cbr + BMIPS_RAC_CONFIG);
+
+ cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
+ __raw_writel(cfg | 0x0fff0000, cbr + BMIPS_RAC_ADDRESS_RANGE);
+ __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
+ break;
+
+ case CPU_BMIPS4380:
+ /* CBG workaround for early BMIPS4380 CPUs */
+ switch (read_c0_prid()) {
+ case 0x2a040:
+ case 0x2a042:
+ case 0x2a044:
+ case 0x2a060:
+ cfg = __raw_readl(cbr + BMIPS_L2_CONFIG);
+ __raw_writel(cfg & ~0x07000000, cbr + BMIPS_L2_CONFIG);
+ __raw_readl(cbr + BMIPS_L2_CONFIG);
+ }
+
+ /* clear BHTD to enable branch history table */
+ clear_c0_brcm_config_0(BIT(21));
+
+ /* XI/ROTR enable */
+ set_c0_brcm_config_0(BIT(23));
+ set_c0_brcm_cmt_ctrl(BIT(15));
+ break;
+
+ case CPU_BMIPS5000:
+ /* enable RDHWR, BRDHWR */
+ set_c0_brcm_config(BIT(17) | BIT(21));
+
+ /* Disable JTB */
+ __asm__ __volatile__(
+ " .set noreorder\n"
+ " li $8, 0x5a455048\n"
+ " .word 0x4088b00f\n" /* mtc0 t0, $22, 15 */
+ " .word 0x4008b008\n" /* mfc0 t0, $22, 8 */
+ " li $9, 0x00008000\n"
+ " or $8, $8, $9\n"
+ " .word 0x4088b008\n" /* mtc0 t0, $22, 8 */
+ " sync\n"
+ " li $8, 0x0\n"
+ " .word 0x4088b00f\n" /* mtc0 t0, $22, 15 */
+ " .set reorder\n"
+ : : : "$8", "$9");
+
+ /* XI enable */
+ set_c0_brcm_config(BIT(27));
+
+ /* enable MIPS32R2 ROR instruction for XI TLB handlers */
+ __asm__ __volatile__(
+ " li $8, 0x5a455048\n"
+ " .word 0x4088b00f\n" /* mtc0 $8, $22, 15 */
+ " nop; nop; nop\n"
+ " .word 0x4008b008\n" /* mfc0 $8, $22, 8 */
+ " lui $9, 0x0100\n"
+ " or $8, $9\n"
+ " .word 0x4088b008\n" /* mtc0 $8, $22, 8 */
+ : : : "$8", "$9");
+ break;
+ }
+}