B43: Handle DMA RX descriptor underrun
Add handling of rx descriptor underflow. This fixes a fault that could
happen on slow machines, where data is received faster than the CPU can
handle. In such a case the device will use up all rx descriptors and
refuse to send any more data before confirming that it is ok. This
patch enables necessary interrupt to discover such a situation and will
handle them by dropping everything in the ring buffer.
Reviewed-by: Michael Buesch <m@bues.ch>
Signed-off-by: Thommy Jakobsson <thommyj@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index d377f77..6dd07e2 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1902,30 +1902,18 @@
}
}
- if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK |
- B43_DMAIRQ_NONFATALMASK))) {
- if (merged_dma_reason & B43_DMAIRQ_FATALMASK) {
- b43err(dev->wl, "Fatal DMA error: "
- "0x%08X, 0x%08X, 0x%08X, "
- "0x%08X, 0x%08X, 0x%08X\n",
- dma_reason[0], dma_reason[1],
- dma_reason[2], dma_reason[3],
- dma_reason[4], dma_reason[5]);
- b43err(dev->wl, "This device does not support DMA "
+ if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK))) {
+ b43err(dev->wl,
+ "Fatal DMA error: 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X\n",
+ dma_reason[0], dma_reason[1],
+ dma_reason[2], dma_reason[3],
+ dma_reason[4], dma_reason[5]);
+ b43err(dev->wl, "This device does not support DMA "
"on your system. It will now be switched to PIO.\n");
- /* Fall back to PIO transfers if we get fatal DMA errors! */
- dev->use_pio = true;
- b43_controller_restart(dev, "DMA error");
- return;
- }
- if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
- b43err(dev->wl, "DMA error: "
- "0x%08X, 0x%08X, 0x%08X, "
- "0x%08X, 0x%08X, 0x%08X\n",
- dma_reason[0], dma_reason[1],
- dma_reason[2], dma_reason[3],
- dma_reason[4], dma_reason[5]);
- }
+ /* Fall back to PIO transfers if we get fatal DMA errors! */
+ dev->use_pio = true;
+ b43_controller_restart(dev, "DMA error");
+ return;
}
if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
@@ -1944,6 +1932,11 @@
handle_irq_noise(dev);
/* Check the DMA reason registers for received data. */
+ if (dma_reason[0] & B43_DMAIRQ_RDESC_UFLOW) {
+ if (B43_DEBUG)
+ b43warn(dev->wl, "RX descriptor underrun\n");
+ b43_dma_handle_rx_overflow(dev->dma.rx_ring);
+ }
if (dma_reason[0] & B43_DMAIRQ_RX_DONE) {
if (b43_using_pio_transfers(dev))
b43_pio_rx(dev->pio.rx_queue);
@@ -2001,7 +1994,7 @@
return IRQ_NONE;
dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
- & 0x0001DC00;
+ & 0x0001FC00;
dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
& 0x0000DC00;
dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
@@ -3130,7 +3123,7 @@
b43_write32(dev, 0x018C, 0x02000000);
}
b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
- b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
+ b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001FC00);
b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);