| /* |
| * Copyright © 2006-2016 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "intel_drv.h" |
| |
| struct intel_shared_dpll * |
| skl_find_link_pll(struct drm_i915_private *dev_priv, int clock) |
| { |
| struct intel_shared_dpll *pll = NULL; |
| struct intel_dpll_hw_state dpll_hw_state; |
| enum intel_dpll_id i; |
| bool found = false; |
| |
| if (!skl_ddi_dp_set_dpll_hw_state(clock, &dpll_hw_state)) |
| return pll; |
| |
| for (i = DPLL_ID_SKL_DPLL1; i <= DPLL_ID_SKL_DPLL3; i++) { |
| pll = &dev_priv->shared_dplls[i]; |
| |
| /* Only want to check enabled timings first */ |
| if (pll->config.crtc_mask == 0) |
| continue; |
| |
| if (memcmp(&dpll_hw_state, &pll->config.hw_state, |
| sizeof(pll->config.hw_state)) == 0) { |
| found = true; |
| break; |
| } |
| } |
| |
| /* Ok no matching timings, maybe there's a free one? */ |
| for (i = DPLL_ID_SKL_DPLL1; |
| ((found == false) && (i <= DPLL_ID_SKL_DPLL3)); i++) { |
| pll = &dev_priv->shared_dplls[i]; |
| if (pll->config.crtc_mask == 0) { |
| pll->config.hw_state = dpll_hw_state; |
| break; |
| } |
| } |
| |
| return pll; |
| } |
| |
| struct intel_shared_dpll * |
| intel_get_shared_dpll_by_id(struct drm_i915_private *dev_priv, |
| enum intel_dpll_id id) |
| { |
| return &dev_priv->shared_dplls[id]; |
| } |
| |
| enum intel_dpll_id |
| intel_get_shared_dpll_id(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| if (WARN_ON(pll < dev_priv->shared_dplls|| |
| pll > &dev_priv->shared_dplls[dev_priv->num_shared_dpll])) |
| return -1; |
| |
| return (enum intel_dpll_id) (pll - dev_priv->shared_dplls); |
| } |
| |
| void |
| intel_shared_dpll_config_get(struct intel_shared_dpll_config *config, |
| struct intel_shared_dpll *pll, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum intel_dpll_id id = intel_get_shared_dpll_id(dev_priv, pll); |
| |
| config[id].crtc_mask |= 1 << crtc->pipe; |
| } |
| |
| void |
| intel_shared_dpll_config_put(struct intel_shared_dpll_config *config, |
| struct intel_shared_dpll *pll, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum intel_dpll_id id = intel_get_shared_dpll_id(dev_priv, pll); |
| |
| config[id].crtc_mask &= ~(1 << crtc->pipe); |
| } |
| |
| /* For ILK+ */ |
| void assert_shared_dpll(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| bool state) |
| { |
| bool cur_state; |
| struct intel_dpll_hw_state hw_state; |
| |
| if (WARN(!pll, "asserting DPLL %s with no DPLL\n", onoff(state))) |
| return; |
| |
| cur_state = pll->funcs.get_hw_state(dev_priv, pll, &hw_state); |
| I915_STATE_WARN(cur_state != state, |
| "%s assertion failure (expected %s, current %s)\n", |
| pll->name, onoff(state), onoff(cur_state)); |
| } |
| |
| void intel_prepare_shared_dpll(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_shared_dpll *pll = crtc->config->shared_dpll; |
| |
| if (WARN_ON(pll == NULL)) |
| return; |
| |
| mutex_lock(&dev_priv->dpll_lock); |
| WARN_ON(!pll->config.crtc_mask); |
| if (!pll->active_mask) { |
| DRM_DEBUG_DRIVER("setting up %s\n", pll->name); |
| WARN_ON(pll->on); |
| assert_shared_dpll_disabled(dev_priv, pll); |
| |
| pll->funcs.mode_set(dev_priv, pll); |
| } |
| mutex_unlock(&dev_priv->dpll_lock); |
| } |
| |
| /** |
| * intel_enable_shared_dpll - enable PCH PLL |
| * @dev_priv: i915 private structure |
| * @pipe: pipe PLL to enable |
| * |
| * The PCH PLL needs to be enabled before the PCH transcoder, since it |
| * drives the transcoder clock. |
| */ |
| void intel_enable_shared_dpll(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_shared_dpll *pll = crtc->config->shared_dpll; |
| unsigned crtc_mask = 1 << drm_crtc_index(&crtc->base); |
| unsigned old_mask; |
| |
| if (WARN_ON(pll == NULL)) |
| return; |
| |
| mutex_lock(&dev_priv->dpll_lock); |
| old_mask = pll->active_mask; |
| |
| if (WARN_ON(!(pll->config.crtc_mask & crtc_mask)) || |
| WARN_ON(pll->active_mask & crtc_mask)) |
| goto out; |
| |
| pll->active_mask |= crtc_mask; |
| |
| DRM_DEBUG_KMS("enable %s (active %x, on? %d) for crtc %d\n", |
| pll->name, pll->active_mask, pll->on, |
| crtc->base.base.id); |
| |
| if (old_mask) { |
| WARN_ON(!pll->on); |
| assert_shared_dpll_enabled(dev_priv, pll); |
| goto out; |
| } |
| WARN_ON(pll->on); |
| |
| DRM_DEBUG_KMS("enabling %s\n", pll->name); |
| pll->funcs.enable(dev_priv, pll); |
| pll->on = true; |
| |
| out: |
| mutex_unlock(&dev_priv->dpll_lock); |
| } |
| |
| void intel_disable_shared_dpll(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_shared_dpll *pll = crtc->config->shared_dpll; |
| unsigned crtc_mask = 1 << drm_crtc_index(&crtc->base); |
| |
| /* PCH only available on ILK+ */ |
| if (INTEL_INFO(dev)->gen < 5) |
| return; |
| |
| if (pll == NULL) |
| return; |
| |
| mutex_lock(&dev_priv->dpll_lock); |
| if (WARN_ON(!(pll->active_mask & crtc_mask))) |
| goto out; |
| |
| DRM_DEBUG_KMS("disable %s (active %x, on? %d) for crtc %d\n", |
| pll->name, pll->active_mask, pll->on, |
| crtc->base.base.id); |
| |
| assert_shared_dpll_enabled(dev_priv, pll); |
| WARN_ON(!pll->on); |
| |
| pll->active_mask &= ~crtc_mask; |
| if (pll->active_mask) |
| goto out; |
| |
| DRM_DEBUG_KMS("disabling %s\n", pll->name); |
| pll->funcs.disable(dev_priv, pll); |
| pll->on = false; |
| |
| out: |
| mutex_unlock(&dev_priv->dpll_lock); |
| } |
| |
| static struct intel_shared_dpll * |
| intel_find_shared_dpll(struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state, |
| enum intel_dpll_id range_min, |
| enum intel_dpll_id range_max) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_shared_dpll *pll; |
| struct intel_shared_dpll_config *shared_dpll; |
| enum intel_dpll_id i; |
| |
| shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state); |
| |
| for (i = range_min; i <= range_max; i++) { |
| pll = &dev_priv->shared_dplls[i]; |
| |
| /* Only want to check enabled timings first */ |
| if (shared_dpll[i].crtc_mask == 0) |
| continue; |
| |
| if (memcmp(&crtc_state->dpll_hw_state, |
| &shared_dpll[i].hw_state, |
| sizeof(crtc_state->dpll_hw_state)) == 0) { |
| DRM_DEBUG_KMS("[CRTC:%d:%s] sharing existing %s (crtc mask 0x%08x, active %x)\n", |
| crtc->base.base.id, crtc->base.name, pll->name, |
| shared_dpll[i].crtc_mask, |
| pll->active_mask); |
| return pll; |
| } |
| } |
| |
| /* Ok no matching timings, maybe there's a free one? */ |
| for (i = range_min; i <= range_max; i++) { |
| pll = &dev_priv->shared_dplls[i]; |
| if (shared_dpll[i].crtc_mask == 0) { |
| DRM_DEBUG_KMS("[CRTC:%d:%s] allocated %s\n", |
| crtc->base.base.id, crtc->base.name, pll->name); |
| return pll; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static void |
| intel_reference_shared_dpll(struct intel_shared_dpll *pll, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_shared_dpll_config *shared_dpll; |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); |
| enum intel_dpll_id i = pll->id; |
| |
| shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state); |
| |
| if (shared_dpll[i].crtc_mask == 0) |
| shared_dpll[i].hw_state = |
| crtc_state->dpll_hw_state; |
| |
| crtc_state->shared_dpll = pll; |
| DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name, |
| pipe_name(crtc->pipe)); |
| |
| intel_shared_dpll_config_get(shared_dpll, pll, crtc); |
| } |
| |
| void intel_shared_dpll_commit(struct drm_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->dev); |
| struct intel_shared_dpll_config *shared_dpll; |
| struct intel_shared_dpll *pll; |
| enum intel_dpll_id i; |
| |
| if (!to_intel_atomic_state(state)->dpll_set) |
| return; |
| |
| shared_dpll = to_intel_atomic_state(state)->shared_dpll; |
| for (i = 0; i < dev_priv->num_shared_dpll; i++) { |
| pll = &dev_priv->shared_dplls[i]; |
| pll->config = shared_dpll[i]; |
| } |
| } |
| |
| static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| struct intel_dpll_hw_state *hw_state) |
| { |
| uint32_t val; |
| |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) |
| return false; |
| |
| val = I915_READ(PCH_DPLL(pll->id)); |
| hw_state->dpll = val; |
| hw_state->fp0 = I915_READ(PCH_FP0(pll->id)); |
| hw_state->fp1 = I915_READ(PCH_FP1(pll->id)); |
| |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); |
| |
| return val & DPLL_VCO_ENABLE; |
| } |
| |
| static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| I915_WRITE(PCH_FP0(pll->id), pll->config.hw_state.fp0); |
| I915_WRITE(PCH_FP1(pll->id), pll->config.hw_state.fp1); |
| } |
| |
| static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv) |
| { |
| u32 val; |
| bool enabled; |
| |
| I915_STATE_WARN_ON(!(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))); |
| |
| val = I915_READ(PCH_DREF_CONTROL); |
| enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK | |
| DREF_SUPERSPREAD_SOURCE_MASK)); |
| I915_STATE_WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n"); |
| } |
| |
| static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| /* PCH refclock must be enabled first */ |
| ibx_assert_pch_refclk_enabled(dev_priv); |
| |
| I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll); |
| |
| /* Wait for the clocks to stabilize. */ |
| POSTING_READ(PCH_DPLL(pll->id)); |
| udelay(150); |
| |
| /* The pixel multiplier can only be updated once the |
| * DPLL is enabled and the clocks are stable. |
| * |
| * So write it again. |
| */ |
| I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll); |
| POSTING_READ(PCH_DPLL(pll->id)); |
| udelay(200); |
| } |
| |
| static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| struct intel_crtc *crtc; |
| |
| /* Make sure no transcoder isn't still depending on us. */ |
| for_each_intel_crtc(dev, crtc) { |
| if (crtc->config->shared_dpll == pll) |
| assert_pch_transcoder_disabled(dev_priv, crtc->pipe); |
| } |
| |
| I915_WRITE(PCH_DPLL(pll->id), 0); |
| POSTING_READ(PCH_DPLL(pll->id)); |
| udelay(200); |
| } |
| |
| static struct intel_shared_dpll * |
| ibx_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, |
| struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_shared_dpll *pll; |
| enum intel_dpll_id i; |
| |
| if (HAS_PCH_IBX(dev_priv)) { |
| /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */ |
| i = (enum intel_dpll_id) crtc->pipe; |
| pll = &dev_priv->shared_dplls[i]; |
| |
| DRM_DEBUG_KMS("[CRTC:%d:%s] using pre-allocated %s\n", |
| crtc->base.base.id, crtc->base.name, pll->name); |
| } else { |
| pll = intel_find_shared_dpll(crtc, crtc_state, |
| DPLL_ID_PCH_PLL_A, |
| DPLL_ID_PCH_PLL_B); |
| } |
| |
| if (!pll) |
| return NULL; |
| |
| /* reference the pll */ |
| intel_reference_shared_dpll(pll, crtc_state); |
| |
| return pll; |
| } |
| |
| static const struct intel_shared_dpll_funcs ibx_pch_dpll_funcs = { |
| .mode_set = ibx_pch_dpll_mode_set, |
| .enable = ibx_pch_dpll_enable, |
| .disable = ibx_pch_dpll_disable, |
| .get_hw_state = ibx_pch_dpll_get_hw_state, |
| }; |
| |
| static void hsw_ddi_wrpll_enable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| I915_WRITE(WRPLL_CTL(pll->id), pll->config.hw_state.wrpll); |
| POSTING_READ(WRPLL_CTL(pll->id)); |
| udelay(20); |
| } |
| |
| static void hsw_ddi_spll_enable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| I915_WRITE(SPLL_CTL, pll->config.hw_state.spll); |
| POSTING_READ(SPLL_CTL); |
| udelay(20); |
| } |
| |
| static void hsw_ddi_wrpll_disable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| uint32_t val; |
| |
| val = I915_READ(WRPLL_CTL(pll->id)); |
| I915_WRITE(WRPLL_CTL(pll->id), val & ~WRPLL_PLL_ENABLE); |
| POSTING_READ(WRPLL_CTL(pll->id)); |
| } |
| |
| static void hsw_ddi_spll_disable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| uint32_t val; |
| |
| val = I915_READ(SPLL_CTL); |
| I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE); |
| POSTING_READ(SPLL_CTL); |
| } |
| |
| static bool hsw_ddi_wrpll_get_hw_state(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| struct intel_dpll_hw_state *hw_state) |
| { |
| uint32_t val; |
| |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) |
| return false; |
| |
| val = I915_READ(WRPLL_CTL(pll->id)); |
| hw_state->wrpll = val; |
| |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); |
| |
| return val & WRPLL_PLL_ENABLE; |
| } |
| |
| static bool hsw_ddi_spll_get_hw_state(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| struct intel_dpll_hw_state *hw_state) |
| { |
| uint32_t val; |
| |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) |
| return false; |
| |
| val = I915_READ(SPLL_CTL); |
| hw_state->spll = val; |
| |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); |
| |
| return val & SPLL_PLL_ENABLE; |
| } |
| |
| #define LC_FREQ 2700 |
| #define LC_FREQ_2K U64_C(LC_FREQ * 2000) |
| |
| #define P_MIN 2 |
| #define P_MAX 64 |
| #define P_INC 2 |
| |
| /* Constraints for PLL good behavior */ |
| #define REF_MIN 48 |
| #define REF_MAX 400 |
| #define VCO_MIN 2400 |
| #define VCO_MAX 4800 |
| |
| struct hsw_wrpll_rnp { |
| unsigned p, n2, r2; |
| }; |
| |
| static unsigned hsw_wrpll_get_budget_for_freq(int clock) |
| { |
| unsigned budget; |
| |
| switch (clock) { |
| case 25175000: |
| case 25200000: |
| case 27000000: |
| case 27027000: |
| case 37762500: |
| case 37800000: |
| case 40500000: |
| case 40541000: |
| case 54000000: |
| case 54054000: |
| case 59341000: |
| case 59400000: |
| case 72000000: |
| case 74176000: |
| case 74250000: |
| case 81000000: |
| case 81081000: |
| case 89012000: |
| case 89100000: |
| case 108000000: |
| case 108108000: |
| case 111264000: |
| case 111375000: |
| case 148352000: |
| case 148500000: |
| case 162000000: |
| case 162162000: |
| case 222525000: |
| case 222750000: |
| case 296703000: |
| case 297000000: |
| budget = 0; |
| break; |
| case 233500000: |
| case 245250000: |
| case 247750000: |
| case 253250000: |
| case 298000000: |
| budget = 1500; |
| break; |
| case 169128000: |
| case 169500000: |
| case 179500000: |
| case 202000000: |
| budget = 2000; |
| break; |
| case 256250000: |
| case 262500000: |
| case 270000000: |
| case 272500000: |
| case 273750000: |
| case 280750000: |
| case 281250000: |
| case 286000000: |
| case 291750000: |
| budget = 4000; |
| break; |
| case 267250000: |
| case 268500000: |
| budget = 5000; |
| break; |
| default: |
| budget = 1000; |
| break; |
| } |
| |
| return budget; |
| } |
| |
| static void hsw_wrpll_update_rnp(uint64_t freq2k, unsigned budget, |
| unsigned r2, unsigned n2, unsigned p, |
| struct hsw_wrpll_rnp *best) |
| { |
| uint64_t a, b, c, d, diff, diff_best; |
| |
| /* No best (r,n,p) yet */ |
| if (best->p == 0) { |
| best->p = p; |
| best->n2 = n2; |
| best->r2 = r2; |
| return; |
| } |
| |
| /* |
| * Output clock is (LC_FREQ_2K / 2000) * N / (P * R), which compares to |
| * freq2k. |
| * |
| * delta = 1e6 * |
| * abs(freq2k - (LC_FREQ_2K * n2/(p * r2))) / |
| * freq2k; |
| * |
| * and we would like delta <= budget. |
| * |
| * If the discrepancy is above the PPM-based budget, always prefer to |
| * improve upon the previous solution. However, if you're within the |
| * budget, try to maximize Ref * VCO, that is N / (P * R^2). |
| */ |
| a = freq2k * budget * p * r2; |
| b = freq2k * budget * best->p * best->r2; |
| diff = abs_diff(freq2k * p * r2, LC_FREQ_2K * n2); |
| diff_best = abs_diff(freq2k * best->p * best->r2, |
| LC_FREQ_2K * best->n2); |
| c = 1000000 * diff; |
| d = 1000000 * diff_best; |
| |
| if (a < c && b < d) { |
| /* If both are above the budget, pick the closer */ |
| if (best->p * best->r2 * diff < p * r2 * diff_best) { |
| best->p = p; |
| best->n2 = n2; |
| best->r2 = r2; |
| } |
| } else if (a >= c && b < d) { |
| /* If A is below the threshold but B is above it? Update. */ |
| best->p = p; |
| best->n2 = n2; |
| best->r2 = r2; |
| } else if (a >= c && b >= d) { |
| /* Both are below the limit, so pick the higher n2/(r2*r2) */ |
| if (n2 * best->r2 * best->r2 > best->n2 * r2 * r2) { |
| best->p = p; |
| best->n2 = n2; |
| best->r2 = r2; |
| } |
| } |
| /* Otherwise a < c && b >= d, do nothing */ |
| } |
| |
| static void |
| hsw_ddi_calculate_wrpll(int clock /* in Hz */, |
| unsigned *r2_out, unsigned *n2_out, unsigned *p_out) |
| { |
| uint64_t freq2k; |
| unsigned p, n2, r2; |
| struct hsw_wrpll_rnp best = { 0, 0, 0 }; |
| unsigned budget; |
| |
| freq2k = clock / 100; |
| |
| budget = hsw_wrpll_get_budget_for_freq(clock); |
| |
| /* Special case handling for 540 pixel clock: bypass WR PLL entirely |
| * and directly pass the LC PLL to it. */ |
| if (freq2k == 5400000) { |
| *n2_out = 2; |
| *p_out = 1; |
| *r2_out = 2; |
| return; |
| } |
| |
| /* |
| * Ref = LC_FREQ / R, where Ref is the actual reference input seen by |
| * the WR PLL. |
| * |
| * We want R so that REF_MIN <= Ref <= REF_MAX. |
| * Injecting R2 = 2 * R gives: |
| * REF_MAX * r2 > LC_FREQ * 2 and |
| * REF_MIN * r2 < LC_FREQ * 2 |
| * |
| * Which means the desired boundaries for r2 are: |
| * LC_FREQ * 2 / REF_MAX < r2 < LC_FREQ * 2 / REF_MIN |
| * |
| */ |
| for (r2 = LC_FREQ * 2 / REF_MAX + 1; |
| r2 <= LC_FREQ * 2 / REF_MIN; |
| r2++) { |
| |
| /* |
| * VCO = N * Ref, that is: VCO = N * LC_FREQ / R |
| * |
| * Once again we want VCO_MIN <= VCO <= VCO_MAX. |
| * Injecting R2 = 2 * R and N2 = 2 * N, we get: |
| * VCO_MAX * r2 > n2 * LC_FREQ and |
| * VCO_MIN * r2 < n2 * LC_FREQ) |
| * |
| * Which means the desired boundaries for n2 are: |
| * VCO_MIN * r2 / LC_FREQ < n2 < VCO_MAX * r2 / LC_FREQ |
| */ |
| for (n2 = VCO_MIN * r2 / LC_FREQ + 1; |
| n2 <= VCO_MAX * r2 / LC_FREQ; |
| n2++) { |
| |
| for (p = P_MIN; p <= P_MAX; p += P_INC) |
| hsw_wrpll_update_rnp(freq2k, budget, |
| r2, n2, p, &best); |
| } |
| } |
| |
| *n2_out = best.n2; |
| *p_out = best.p; |
| *r2_out = best.r2; |
| } |
| |
| static struct intel_shared_dpll *hsw_ddi_hdmi_get_dpll(int clock, |
| struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_shared_dpll *pll; |
| uint32_t val; |
| unsigned int p, n2, r2; |
| |
| hsw_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p); |
| |
| val = WRPLL_PLL_ENABLE | WRPLL_PLL_LCPLL | |
| WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) | |
| WRPLL_DIVIDER_POST(p); |
| |
| crtc_state->dpll_hw_state.wrpll = val; |
| |
| pll = intel_find_shared_dpll(crtc, crtc_state, |
| DPLL_ID_WRPLL1, DPLL_ID_WRPLL2); |
| |
| if (!pll) |
| return NULL; |
| |
| return pll; |
| } |
| |
| struct intel_shared_dpll *hsw_ddi_dp_get_dpll(struct intel_encoder *encoder, |
| int clock) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_shared_dpll *pll; |
| enum intel_dpll_id pll_id; |
| |
| switch (clock / 2) { |
| case 81000: |
| pll_id = DPLL_ID_LCPLL_810; |
| break; |
| case 135000: |
| pll_id = DPLL_ID_LCPLL_1350; |
| break; |
| case 270000: |
| pll_id = DPLL_ID_LCPLL_2700; |
| break; |
| default: |
| DRM_DEBUG_KMS("Invalid clock for DP: %d\n", clock); |
| return NULL; |
| } |
| |
| pll = intel_get_shared_dpll_by_id(dev_priv, pll_id); |
| |
| if (!pll) |
| return NULL; |
| |
| return pll; |
| } |
| |
| static struct intel_shared_dpll * |
| hsw_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, |
| struct intel_encoder *encoder) |
| { |
| struct intel_shared_dpll *pll; |
| int clock = crtc_state->port_clock; |
| |
| memset(&crtc_state->dpll_hw_state, 0, |
| sizeof(crtc_state->dpll_hw_state)); |
| |
| if (encoder->type == INTEL_OUTPUT_HDMI) { |
| pll = hsw_ddi_hdmi_get_dpll(clock, crtc, crtc_state); |
| |
| } else if (encoder->type == INTEL_OUTPUT_DP || |
| encoder->type == INTEL_OUTPUT_DP_MST || |
| encoder->type == INTEL_OUTPUT_EDP) { |
| pll = hsw_ddi_dp_get_dpll(encoder, clock); |
| |
| } else if (encoder->type == INTEL_OUTPUT_ANALOG) { |
| if (WARN_ON(crtc_state->port_clock / 2 != 135000)) |
| return NULL; |
| |
| crtc_state->dpll_hw_state.spll = |
| SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC; |
| |
| pll = intel_find_shared_dpll(crtc, crtc_state, |
| DPLL_ID_SPLL, DPLL_ID_SPLL); |
| } else { |
| return NULL; |
| } |
| |
| if (!pll) |
| return NULL; |
| |
| intel_reference_shared_dpll(pll, crtc_state); |
| |
| return pll; |
| } |
| |
| static const struct intel_shared_dpll_funcs hsw_ddi_wrpll_funcs = { |
| .enable = hsw_ddi_wrpll_enable, |
| .disable = hsw_ddi_wrpll_disable, |
| .get_hw_state = hsw_ddi_wrpll_get_hw_state, |
| }; |
| |
| static const struct intel_shared_dpll_funcs hsw_ddi_spll_funcs = { |
| .enable = hsw_ddi_spll_enable, |
| .disable = hsw_ddi_spll_disable, |
| .get_hw_state = hsw_ddi_spll_get_hw_state, |
| }; |
| |
| static void hsw_ddi_lcpll_enable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| } |
| |
| static void hsw_ddi_lcpll_disable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| } |
| |
| static bool hsw_ddi_lcpll_get_hw_state(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| struct intel_dpll_hw_state *hw_state) |
| { |
| return true; |
| } |
| |
| static const struct intel_shared_dpll_funcs hsw_ddi_lcpll_funcs = { |
| .enable = hsw_ddi_lcpll_enable, |
| .disable = hsw_ddi_lcpll_disable, |
| .get_hw_state = hsw_ddi_lcpll_get_hw_state, |
| }; |
| |
| struct skl_dpll_regs { |
| i915_reg_t ctl, cfgcr1, cfgcr2; |
| }; |
| |
| /* this array is indexed by the *shared* pll id */ |
| static const struct skl_dpll_regs skl_dpll_regs[4] = { |
| { |
| /* DPLL 0 */ |
| .ctl = LCPLL1_CTL, |
| /* DPLL 0 doesn't support HDMI mode */ |
| }, |
| { |
| /* DPLL 1 */ |
| .ctl = LCPLL2_CTL, |
| .cfgcr1 = DPLL_CFGCR1(SKL_DPLL1), |
| .cfgcr2 = DPLL_CFGCR2(SKL_DPLL1), |
| }, |
| { |
| /* DPLL 2 */ |
| .ctl = WRPLL_CTL(0), |
| .cfgcr1 = DPLL_CFGCR1(SKL_DPLL2), |
| .cfgcr2 = DPLL_CFGCR2(SKL_DPLL2), |
| }, |
| { |
| /* DPLL 3 */ |
| .ctl = WRPLL_CTL(1), |
| .cfgcr1 = DPLL_CFGCR1(SKL_DPLL3), |
| .cfgcr2 = DPLL_CFGCR2(SKL_DPLL3), |
| }, |
| }; |
| |
| static void skl_ddi_pll_write_ctrl1(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| uint32_t val; |
| |
| val = I915_READ(DPLL_CTRL1); |
| |
| val &= ~(DPLL_CTRL1_HDMI_MODE(pll->id) | DPLL_CTRL1_SSC(pll->id) | |
| DPLL_CTRL1_LINK_RATE_MASK(pll->id)); |
| val |= pll->config.hw_state.ctrl1 << (pll->id * 6); |
| |
| I915_WRITE(DPLL_CTRL1, val); |
| POSTING_READ(DPLL_CTRL1); |
| } |
| |
| static void skl_ddi_pll_enable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| const struct skl_dpll_regs *regs = skl_dpll_regs; |
| |
| skl_ddi_pll_write_ctrl1(dev_priv, pll); |
| |
| I915_WRITE(regs[pll->id].cfgcr1, pll->config.hw_state.cfgcr1); |
| I915_WRITE(regs[pll->id].cfgcr2, pll->config.hw_state.cfgcr2); |
| POSTING_READ(regs[pll->id].cfgcr1); |
| POSTING_READ(regs[pll->id].cfgcr2); |
| |
| /* the enable bit is always bit 31 */ |
| I915_WRITE(regs[pll->id].ctl, |
| I915_READ(regs[pll->id].ctl) | LCPLL_PLL_ENABLE); |
| |
| if (intel_wait_for_register(dev_priv, |
| DPLL_STATUS, |
| DPLL_LOCK(pll->id), |
| DPLL_LOCK(pll->id), |
| 5)) |
| DRM_ERROR("DPLL %d not locked\n", pll->id); |
| } |
| |
| static void skl_ddi_dpll0_enable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| skl_ddi_pll_write_ctrl1(dev_priv, pll); |
| } |
| |
| static void skl_ddi_pll_disable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| const struct skl_dpll_regs *regs = skl_dpll_regs; |
| |
| /* the enable bit is always bit 31 */ |
| I915_WRITE(regs[pll->id].ctl, |
| I915_READ(regs[pll->id].ctl) & ~LCPLL_PLL_ENABLE); |
| POSTING_READ(regs[pll->id].ctl); |
| } |
| |
| static void skl_ddi_dpll0_disable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| } |
| |
| static bool skl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| struct intel_dpll_hw_state *hw_state) |
| { |
| uint32_t val; |
| const struct skl_dpll_regs *regs = skl_dpll_regs; |
| bool ret; |
| |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) |
| return false; |
| |
| ret = false; |
| |
| val = I915_READ(regs[pll->id].ctl); |
| if (!(val & LCPLL_PLL_ENABLE)) |
| goto out; |
| |
| val = I915_READ(DPLL_CTRL1); |
| hw_state->ctrl1 = (val >> (pll->id * 6)) & 0x3f; |
| |
| /* avoid reading back stale values if HDMI mode is not enabled */ |
| if (val & DPLL_CTRL1_HDMI_MODE(pll->id)) { |
| hw_state->cfgcr1 = I915_READ(regs[pll->id].cfgcr1); |
| hw_state->cfgcr2 = I915_READ(regs[pll->id].cfgcr2); |
| } |
| ret = true; |
| |
| out: |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); |
| |
| return ret; |
| } |
| |
| static bool skl_ddi_dpll0_get_hw_state(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| struct intel_dpll_hw_state *hw_state) |
| { |
| uint32_t val; |
| const struct skl_dpll_regs *regs = skl_dpll_regs; |
| bool ret; |
| |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) |
| return false; |
| |
| ret = false; |
| |
| /* DPLL0 is always enabled since it drives CDCLK */ |
| val = I915_READ(regs[pll->id].ctl); |
| if (WARN_ON(!(val & LCPLL_PLL_ENABLE))) |
| goto out; |
| |
| val = I915_READ(DPLL_CTRL1); |
| hw_state->ctrl1 = (val >> (pll->id * 6)) & 0x3f; |
| |
| ret = true; |
| |
| out: |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); |
| |
| return ret; |
| } |
| |
| struct skl_wrpll_context { |
| uint64_t min_deviation; /* current minimal deviation */ |
| uint64_t central_freq; /* chosen central freq */ |
| uint64_t dco_freq; /* chosen dco freq */ |
| unsigned int p; /* chosen divider */ |
| }; |
| |
| static void skl_wrpll_context_init(struct skl_wrpll_context *ctx) |
| { |
| memset(ctx, 0, sizeof(*ctx)); |
| |
| ctx->min_deviation = U64_MAX; |
| } |
| |
| /* DCO freq must be within +1%/-6% of the DCO central freq */ |
| #define SKL_DCO_MAX_PDEVIATION 100 |
| #define SKL_DCO_MAX_NDEVIATION 600 |
| |
| static void skl_wrpll_try_divider(struct skl_wrpll_context *ctx, |
| uint64_t central_freq, |
| uint64_t dco_freq, |
| unsigned int divider) |
| { |
| uint64_t deviation; |
| |
| deviation = div64_u64(10000 * abs_diff(dco_freq, central_freq), |
| central_freq); |
| |
| /* positive deviation */ |
| if (dco_freq >= central_freq) { |
| if (deviation < SKL_DCO_MAX_PDEVIATION && |
| deviation < ctx->min_deviation) { |
| ctx->min_deviation = deviation; |
| ctx->central_freq = central_freq; |
| ctx->dco_freq = dco_freq; |
| ctx->p = divider; |
| } |
| /* negative deviation */ |
| } else if (deviation < SKL_DCO_MAX_NDEVIATION && |
| deviation < ctx->min_deviation) { |
| ctx->min_deviation = deviation; |
| ctx->central_freq = central_freq; |
| ctx->dco_freq = dco_freq; |
| ctx->p = divider; |
| } |
| } |
| |
| static void skl_wrpll_get_multipliers(unsigned int p, |
| unsigned int *p0 /* out */, |
| unsigned int *p1 /* out */, |
| unsigned int *p2 /* out */) |
| { |
| /* even dividers */ |
| if (p % 2 == 0) { |
| unsigned int half = p / 2; |
| |
| if (half == 1 || half == 2 || half == 3 || half == 5) { |
| *p0 = 2; |
| *p1 = 1; |
| *p2 = half; |
| } else if (half % 2 == 0) { |
| *p0 = 2; |
| *p1 = half / 2; |
| *p2 = 2; |
| } else if (half % 3 == 0) { |
| *p0 = 3; |
| *p1 = half / 3; |
| *p2 = 2; |
| } else if (half % 7 == 0) { |
| *p0 = 7; |
| *p1 = half / 7; |
| *p2 = 2; |
| } |
| } else if (p == 3 || p == 9) { /* 3, 5, 7, 9, 15, 21, 35 */ |
| *p0 = 3; |
| *p1 = 1; |
| *p2 = p / 3; |
| } else if (p == 5 || p == 7) { |
| *p0 = p; |
| *p1 = 1; |
| *p2 = 1; |
| } else if (p == 15) { |
| *p0 = 3; |
| *p1 = 1; |
| *p2 = 5; |
| } else if (p == 21) { |
| *p0 = 7; |
| *p1 = 1; |
| *p2 = 3; |
| } else if (p == 35) { |
| *p0 = 7; |
| *p1 = 1; |
| *p2 = 5; |
| } |
| } |
| |
| struct skl_wrpll_params { |
| uint32_t dco_fraction; |
| uint32_t dco_integer; |
| uint32_t qdiv_ratio; |
| uint32_t qdiv_mode; |
| uint32_t kdiv; |
| uint32_t pdiv; |
| uint32_t central_freq; |
| }; |
| |
| static void skl_wrpll_params_populate(struct skl_wrpll_params *params, |
| uint64_t afe_clock, |
| uint64_t central_freq, |
| uint32_t p0, uint32_t p1, uint32_t p2) |
| { |
| uint64_t dco_freq; |
| |
| switch (central_freq) { |
| case 9600000000ULL: |
| params->central_freq = 0; |
| break; |
| case 9000000000ULL: |
| params->central_freq = 1; |
| break; |
| case 8400000000ULL: |
| params->central_freq = 3; |
| } |
| |
| switch (p0) { |
| case 1: |
| params->pdiv = 0; |
| break; |
| case 2: |
| params->pdiv = 1; |
| break; |
| case 3: |
| params->pdiv = 2; |
| break; |
| case 7: |
| params->pdiv = 4; |
| break; |
| default: |
| WARN(1, "Incorrect PDiv\n"); |
| } |
| |
| switch (p2) { |
| case 5: |
| params->kdiv = 0; |
| break; |
| case 2: |
| params->kdiv = 1; |
| break; |
| case 3: |
| params->kdiv = 2; |
| break; |
| case 1: |
| params->kdiv = 3; |
| break; |
| default: |
| WARN(1, "Incorrect KDiv\n"); |
| } |
| |
| params->qdiv_ratio = p1; |
| params->qdiv_mode = (params->qdiv_ratio == 1) ? 0 : 1; |
| |
| dco_freq = p0 * p1 * p2 * afe_clock; |
| |
| /* |
| * Intermediate values are in Hz. |
| * Divide by MHz to match bsepc |
| */ |
| params->dco_integer = div_u64(dco_freq, 24 * MHz(1)); |
| params->dco_fraction = |
| div_u64((div_u64(dco_freq, 24) - |
| params->dco_integer * MHz(1)) * 0x8000, MHz(1)); |
| } |
| |
| static bool |
| skl_ddi_calculate_wrpll(int clock /* in Hz */, |
| struct skl_wrpll_params *wrpll_params) |
| { |
| uint64_t afe_clock = clock * 5; /* AFE Clock is 5x Pixel clock */ |
| uint64_t dco_central_freq[3] = {8400000000ULL, |
| 9000000000ULL, |
| 9600000000ULL}; |
| static const int even_dividers[] = { 4, 6, 8, 10, 12, 14, 16, 18, 20, |
| 24, 28, 30, 32, 36, 40, 42, 44, |
| 48, 52, 54, 56, 60, 64, 66, 68, |
| 70, 72, 76, 78, 80, 84, 88, 90, |
| 92, 96, 98 }; |
| static const int odd_dividers[] = { 3, 5, 7, 9, 15, 21, 35 }; |
| static const struct { |
| const int *list; |
| int n_dividers; |
| } dividers[] = { |
| { even_dividers, ARRAY_SIZE(even_dividers) }, |
| { odd_dividers, ARRAY_SIZE(odd_dividers) }, |
| }; |
| struct skl_wrpll_context ctx; |
| unsigned int dco, d, i; |
| unsigned int p0, p1, p2; |
| |
| skl_wrpll_context_init(&ctx); |
| |
| for (d = 0; d < ARRAY_SIZE(dividers); d++) { |
| for (dco = 0; dco < ARRAY_SIZE(dco_central_freq); dco++) { |
| for (i = 0; i < dividers[d].n_dividers; i++) { |
| unsigned int p = dividers[d].list[i]; |
| uint64_t dco_freq = p * afe_clock; |
| |
| skl_wrpll_try_divider(&ctx, |
| dco_central_freq[dco], |
| dco_freq, |
| p); |
| /* |
| * Skip the remaining dividers if we're sure to |
| * have found the definitive divider, we can't |
| * improve a 0 deviation. |
| */ |
| if (ctx.min_deviation == 0) |
| goto skip_remaining_dividers; |
| } |
| } |
| |
| skip_remaining_dividers: |
| /* |
| * If a solution is found with an even divider, prefer |
| * this one. |
| */ |
| if (d == 0 && ctx.p) |
| break; |
| } |
| |
| if (!ctx.p) { |
| DRM_DEBUG_DRIVER("No valid divider found for %dHz\n", clock); |
| return false; |
| } |
| |
| /* |
| * gcc incorrectly analyses that these can be used without being |
| * initialized. To be fair, it's hard to guess. |
| */ |
| p0 = p1 = p2 = 0; |
| skl_wrpll_get_multipliers(ctx.p, &p0, &p1, &p2); |
| skl_wrpll_params_populate(wrpll_params, afe_clock, ctx.central_freq, |
| p0, p1, p2); |
| |
| return true; |
| } |
| |
| static bool skl_ddi_hdmi_pll_dividers(struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state, |
| int clock) |
| { |
| uint32_t ctrl1, cfgcr1, cfgcr2; |
| struct skl_wrpll_params wrpll_params = { 0, }; |
| |
| /* |
| * See comment in intel_dpll_hw_state to understand why we always use 0 |
| * as the DPLL id in this function. |
| */ |
| ctrl1 = DPLL_CTRL1_OVERRIDE(0); |
| |
| ctrl1 |= DPLL_CTRL1_HDMI_MODE(0); |
| |
| if (!skl_ddi_calculate_wrpll(clock * 1000, &wrpll_params)) |
| return false; |
| |
| cfgcr1 = DPLL_CFGCR1_FREQ_ENABLE | |
| DPLL_CFGCR1_DCO_FRACTION(wrpll_params.dco_fraction) | |
| wrpll_params.dco_integer; |
| |
| cfgcr2 = DPLL_CFGCR2_QDIV_RATIO(wrpll_params.qdiv_ratio) | |
| DPLL_CFGCR2_QDIV_MODE(wrpll_params.qdiv_mode) | |
| DPLL_CFGCR2_KDIV(wrpll_params.kdiv) | |
| DPLL_CFGCR2_PDIV(wrpll_params.pdiv) | |
| wrpll_params.central_freq; |
| |
| memset(&crtc_state->dpll_hw_state, 0, |
| sizeof(crtc_state->dpll_hw_state)); |
| |
| crtc_state->dpll_hw_state.ctrl1 = ctrl1; |
| crtc_state->dpll_hw_state.cfgcr1 = cfgcr1; |
| crtc_state->dpll_hw_state.cfgcr2 = cfgcr2; |
| return true; |
| } |
| |
| |
| bool skl_ddi_dp_set_dpll_hw_state(int clock, |
| struct intel_dpll_hw_state *dpll_hw_state) |
| { |
| uint32_t ctrl1; |
| |
| /* |
| * See comment in intel_dpll_hw_state to understand why we always use 0 |
| * as the DPLL id in this function. |
| */ |
| ctrl1 = DPLL_CTRL1_OVERRIDE(0); |
| switch (clock / 2) { |
| case 81000: |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 0); |
| break; |
| case 135000: |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, 0); |
| break; |
| case 270000: |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0); |
| break; |
| /* eDP 1.4 rates */ |
| case 162000: |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, 0); |
| break; |
| case 108000: |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, 0); |
| break; |
| case 216000: |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, 0); |
| break; |
| } |
| |
| dpll_hw_state->ctrl1 = ctrl1; |
| return true; |
| } |
| |
| static struct intel_shared_dpll * |
| skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, |
| struct intel_encoder *encoder) |
| { |
| struct intel_shared_dpll *pll; |
| int clock = crtc_state->port_clock; |
| bool bret; |
| struct intel_dpll_hw_state dpll_hw_state; |
| |
| memset(&dpll_hw_state, 0, sizeof(dpll_hw_state)); |
| |
| if (encoder->type == INTEL_OUTPUT_HDMI) { |
| bret = skl_ddi_hdmi_pll_dividers(crtc, crtc_state, clock); |
| if (!bret) { |
| DRM_DEBUG_KMS("Could not get HDMI pll dividers.\n"); |
| return NULL; |
| } |
| } else if (encoder->type == INTEL_OUTPUT_DP || |
| encoder->type == INTEL_OUTPUT_DP_MST || |
| encoder->type == INTEL_OUTPUT_EDP) { |
| bret = skl_ddi_dp_set_dpll_hw_state(clock, &dpll_hw_state); |
| if (!bret) { |
| DRM_DEBUG_KMS("Could not set DP dpll HW state.\n"); |
| return NULL; |
| } |
| crtc_state->dpll_hw_state = dpll_hw_state; |
| } else { |
| return NULL; |
| } |
| |
| if (encoder->type == INTEL_OUTPUT_EDP) |
| pll = intel_find_shared_dpll(crtc, crtc_state, |
| DPLL_ID_SKL_DPLL0, |
| DPLL_ID_SKL_DPLL0); |
| else |
| pll = intel_find_shared_dpll(crtc, crtc_state, |
| DPLL_ID_SKL_DPLL1, |
| DPLL_ID_SKL_DPLL3); |
| if (!pll) |
| return NULL; |
| |
| intel_reference_shared_dpll(pll, crtc_state); |
| |
| return pll; |
| } |
| |
| static const struct intel_shared_dpll_funcs skl_ddi_pll_funcs = { |
| .enable = skl_ddi_pll_enable, |
| .disable = skl_ddi_pll_disable, |
| .get_hw_state = skl_ddi_pll_get_hw_state, |
| }; |
| |
| static const struct intel_shared_dpll_funcs skl_ddi_dpll0_funcs = { |
| .enable = skl_ddi_dpll0_enable, |
| .disable = skl_ddi_dpll0_disable, |
| .get_hw_state = skl_ddi_dpll0_get_hw_state, |
| }; |
| |
| static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| uint32_t temp; |
| enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */ |
| |
| /* Non-SSC reference */ |
| temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); |
| temp |= PORT_PLL_REF_SEL; |
| I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); |
| |
| /* Disable 10 bit clock */ |
| temp = I915_READ(BXT_PORT_PLL_EBB_4(port)); |
| temp &= ~PORT_PLL_10BIT_CLK_ENABLE; |
| I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp); |
| |
| /* Write P1 & P2 */ |
| temp = I915_READ(BXT_PORT_PLL_EBB_0(port)); |
| temp &= ~(PORT_PLL_P1_MASK | PORT_PLL_P2_MASK); |
| temp |= pll->config.hw_state.ebb0; |
| I915_WRITE(BXT_PORT_PLL_EBB_0(port), temp); |
| |
| /* Write M2 integer */ |
| temp = I915_READ(BXT_PORT_PLL(port, 0)); |
| temp &= ~PORT_PLL_M2_MASK; |
| temp |= pll->config.hw_state.pll0; |
| I915_WRITE(BXT_PORT_PLL(port, 0), temp); |
| |
| /* Write N */ |
| temp = I915_READ(BXT_PORT_PLL(port, 1)); |
| temp &= ~PORT_PLL_N_MASK; |
| temp |= pll->config.hw_state.pll1; |
| I915_WRITE(BXT_PORT_PLL(port, 1), temp); |
| |
| /* Write M2 fraction */ |
| temp = I915_READ(BXT_PORT_PLL(port, 2)); |
| temp &= ~PORT_PLL_M2_FRAC_MASK; |
| temp |= pll->config.hw_state.pll2; |
| I915_WRITE(BXT_PORT_PLL(port, 2), temp); |
| |
| /* Write M2 fraction enable */ |
| temp = I915_READ(BXT_PORT_PLL(port, 3)); |
| temp &= ~PORT_PLL_M2_FRAC_ENABLE; |
| temp |= pll->config.hw_state.pll3; |
| I915_WRITE(BXT_PORT_PLL(port, 3), temp); |
| |
| /* Write coeff */ |
| temp = I915_READ(BXT_PORT_PLL(port, 6)); |
| temp &= ~PORT_PLL_PROP_COEFF_MASK; |
| temp &= ~PORT_PLL_INT_COEFF_MASK; |
| temp &= ~PORT_PLL_GAIN_CTL_MASK; |
| temp |= pll->config.hw_state.pll6; |
| I915_WRITE(BXT_PORT_PLL(port, 6), temp); |
| |
| /* Write calibration val */ |
| temp = I915_READ(BXT_PORT_PLL(port, 8)); |
| temp &= ~PORT_PLL_TARGET_CNT_MASK; |
| temp |= pll->config.hw_state.pll8; |
| I915_WRITE(BXT_PORT_PLL(port, 8), temp); |
| |
| temp = I915_READ(BXT_PORT_PLL(port, 9)); |
| temp &= ~PORT_PLL_LOCK_THRESHOLD_MASK; |
| temp |= pll->config.hw_state.pll9; |
| I915_WRITE(BXT_PORT_PLL(port, 9), temp); |
| |
| temp = I915_READ(BXT_PORT_PLL(port, 10)); |
| temp &= ~PORT_PLL_DCO_AMP_OVR_EN_H; |
| temp &= ~PORT_PLL_DCO_AMP_MASK; |
| temp |= pll->config.hw_state.pll10; |
| I915_WRITE(BXT_PORT_PLL(port, 10), temp); |
| |
| /* Recalibrate with new settings */ |
| temp = I915_READ(BXT_PORT_PLL_EBB_4(port)); |
| temp |= PORT_PLL_RECALIBRATE; |
| I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp); |
| temp &= ~PORT_PLL_10BIT_CLK_ENABLE; |
| temp |= pll->config.hw_state.ebb4; |
| I915_WRITE(BXT_PORT_PLL_EBB_4(port), temp); |
| |
| /* Enable PLL */ |
| temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); |
| temp |= PORT_PLL_ENABLE; |
| I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); |
| POSTING_READ(BXT_PORT_PLL_ENABLE(port)); |
| |
| if (wait_for_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & PORT_PLL_LOCK), |
| 200)) |
| DRM_ERROR("PLL %d not locked\n", port); |
| |
| /* |
| * While we write to the group register to program all lanes at once we |
| * can read only lane registers and we pick lanes 0/1 for that. |
| */ |
| temp = I915_READ(BXT_PORT_PCS_DW12_LN01(port)); |
| temp &= ~LANE_STAGGER_MASK; |
| temp &= ~LANESTAGGER_STRAP_OVRD; |
| temp |= pll->config.hw_state.pcsdw12; |
| I915_WRITE(BXT_PORT_PCS_DW12_GRP(port), temp); |
| } |
| |
| static void bxt_ddi_pll_disable(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll) |
| { |
| enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */ |
| uint32_t temp; |
| |
| temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); |
| temp &= ~PORT_PLL_ENABLE; |
| I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); |
| POSTING_READ(BXT_PORT_PLL_ENABLE(port)); |
| } |
| |
| static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv, |
| struct intel_shared_dpll *pll, |
| struct intel_dpll_hw_state *hw_state) |
| { |
| enum port port = (enum port)pll->id; /* 1:1 port->PLL mapping */ |
| uint32_t val; |
| bool ret; |
| |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) |
| return false; |
| |
| ret = false; |
| |
| val = I915_READ(BXT_PORT_PLL_ENABLE(port)); |
| if (!(val & PORT_PLL_ENABLE)) |
| goto out; |
| |
| hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(port)); |
| hw_state->ebb0 &= PORT_PLL_P1_MASK | PORT_PLL_P2_MASK; |
| |
| hw_state->ebb4 = I915_READ(BXT_PORT_PLL_EBB_4(port)); |
| hw_state->ebb4 &= PORT_PLL_10BIT_CLK_ENABLE; |
| |
| hw_state->pll0 = I915_READ(BXT_PORT_PLL(port, 0)); |
| hw_state->pll0 &= PORT_PLL_M2_MASK; |
| |
| hw_state->pll1 = I915_READ(BXT_PORT_PLL(port, 1)); |
| hw_state->pll1 &= PORT_PLL_N_MASK; |
| |
| hw_state->pll2 = I915_READ(BXT_PORT_PLL(port, 2)); |
| hw_state->pll2 &= PORT_PLL_M2_FRAC_MASK; |
| |
| hw_state->pll3 = I915_READ(BXT_PORT_PLL(port, 3)); |
| hw_state->pll3 &= PORT_PLL_M2_FRAC_ENABLE; |
| |
| hw_state->pll6 = I915_READ(BXT_PORT_PLL(port, 6)); |
| hw_state->pll6 &= PORT_PLL_PROP_COEFF_MASK | |
| PORT_PLL_INT_COEFF_MASK | |
| PORT_PLL_GAIN_CTL_MASK; |
| |
| hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8)); |
| hw_state->pll8 &= PORT_PLL_TARGET_CNT_MASK; |
| |
| hw_state->pll9 = I915_READ(BXT_PORT_PLL(port, 9)); |
| hw_state->pll9 &= PORT_PLL_LOCK_THRESHOLD_MASK; |
| |
| hw_state->pll10 = I915_READ(BXT_PORT_PLL(port, 10)); |
| hw_state->pll10 &= PORT_PLL_DCO_AMP_OVR_EN_H | |
| PORT_PLL_DCO_AMP_MASK; |
| |
| /* |
| * While we write to the group register to program all lanes at once we |
| * can read only lane registers. We configure all lanes the same way, so |
| * here just read out lanes 0/1 and output a note if lanes 2/3 differ. |
| */ |
| hw_state->pcsdw12 = I915_READ(BXT_PORT_PCS_DW12_LN01(port)); |
| if (I915_READ(BXT_PORT_PCS_DW12_LN23(port)) != hw_state->pcsdw12) |
| DRM_DEBUG_DRIVER("lane stagger config different for lane 01 (%08x) and 23 (%08x)\n", |
| hw_state->pcsdw12, |
| I915_READ(BXT_PORT_PCS_DW12_LN23(port))); |
| hw_state->pcsdw12 &= LANE_STAGGER_MASK | LANESTAGGER_STRAP_OVRD; |
| |
| ret = true; |
| |
| out: |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); |
| |
| return ret; |
| } |
| |
| /* bxt clock parameters */ |
| struct bxt_clk_div { |
| int clock; |
| uint32_t p1; |
| uint32_t p2; |
| uint32_t m2_int; |
| uint32_t m2_frac; |
| bool m2_frac_en; |
| uint32_t n; |
| |
| int vco; |
| }; |
| |
| /* pre-calculated values for DP linkrates */ |
| static const struct bxt_clk_div bxt_dp_clk_val[] = { |
| {162000, 4, 2, 32, 1677722, 1, 1}, |
| {270000, 4, 1, 27, 0, 0, 1}, |
| {540000, 2, 1, 27, 0, 0, 1}, |
| {216000, 3, 2, 32, 1677722, 1, 1}, |
| {243000, 4, 1, 24, 1258291, 1, 1}, |
| {324000, 4, 1, 32, 1677722, 1, 1}, |
| {432000, 3, 1, 32, 1677722, 1, 1} |
| }; |
| |
| static bool |
| bxt_ddi_hdmi_pll_dividers(struct intel_crtc *intel_crtc, |
| struct intel_crtc_state *crtc_state, int clock, |
| struct bxt_clk_div *clk_div) |
| { |
| struct dpll best_clock; |
| |
| /* Calculate HDMI div */ |
| /* |
| * FIXME: tie the following calculation into |
| * i9xx_crtc_compute_clock |
| */ |
| if (!bxt_find_best_dpll(crtc_state, clock, &best_clock)) { |
| DRM_DEBUG_DRIVER("no PLL dividers found for clock %d pipe %c\n", |
| clock, pipe_name(intel_crtc->pipe)); |
| return false; |
| } |
| |
| clk_div->p1 = best_clock.p1; |
| clk_div->p2 = best_clock.p2; |
| WARN_ON(best_clock.m1 != 2); |
| clk_div->n = best_clock.n; |
| clk_div->m2_int = best_clock.m2 >> 22; |
| clk_div->m2_frac = best_clock.m2 & ((1 << 22) - 1); |
| clk_div->m2_frac_en = clk_div->m2_frac != 0; |
| |
| clk_div->vco = best_clock.vco; |
| |
| return true; |
| } |
| |
| static void bxt_ddi_dp_pll_dividers(int clock, struct bxt_clk_div *clk_div) |
| { |
| int i; |
| |
| *clk_div = bxt_dp_clk_val[0]; |
| for (i = 0; i < ARRAY_SIZE(bxt_dp_clk_val); ++i) { |
| if (bxt_dp_clk_val[i].clock == clock) { |
| *clk_div = bxt_dp_clk_val[i]; |
| break; |
| } |
| } |
| |
| clk_div->vco = clock * 10 / 2 * clk_div->p1 * clk_div->p2; |
| } |
| |
| static bool bxt_ddi_set_dpll_hw_state(int clock, |
| struct bxt_clk_div *clk_div, |
| struct intel_dpll_hw_state *dpll_hw_state) |
| { |
| int vco = clk_div->vco; |
| uint32_t prop_coef, int_coef, gain_ctl, targ_cnt; |
| uint32_t lanestagger; |
| |
| if (vco >= 6200000 && vco <= 6700000) { |
| prop_coef = 4; |
| int_coef = 9; |
| gain_ctl = 3; |
| targ_cnt = 8; |
| } else if ((vco > 5400000 && vco < 6200000) || |
| (vco >= 4800000 && vco < 5400000)) { |
| prop_coef = 5; |
| int_coef = 11; |
| gain_ctl = 3; |
| targ_cnt = 9; |
| } else if (vco == 5400000) { |
| prop_coef = 3; |
| int_coef = 8; |
| gain_ctl = 1; |
| targ_cnt = 9; |
| } else { |
| DRM_ERROR("Invalid VCO\n"); |
| return false; |
| } |
| |
| if (clock > 270000) |
| lanestagger = 0x18; |
| else if (clock > 135000) |
| lanestagger = 0x0d; |
| else if (clock > 67000) |
| lanestagger = 0x07; |
| else if (clock > 33000) |
| lanestagger = 0x04; |
| else |
| lanestagger = 0x02; |
| |
| dpll_hw_state->ebb0 = PORT_PLL_P1(clk_div->p1) | PORT_PLL_P2(clk_div->p2); |
| dpll_hw_state->pll0 = clk_div->m2_int; |
| dpll_hw_state->pll1 = PORT_PLL_N(clk_div->n); |
| dpll_hw_state->pll2 = clk_div->m2_frac; |
| |
| if (clk_div->m2_frac_en) |
| dpll_hw_state->pll3 = PORT_PLL_M2_FRAC_ENABLE; |
| |
| dpll_hw_state->pll6 = prop_coef | PORT_PLL_INT_COEFF(int_coef); |
| dpll_hw_state->pll6 |= PORT_PLL_GAIN_CTL(gain_ctl); |
| |
| dpll_hw_state->pll8 = targ_cnt; |
| |
| dpll_hw_state->pll9 = 5 << PORT_PLL_LOCK_THRESHOLD_SHIFT; |
| |
| dpll_hw_state->pll10 = |
| PORT_PLL_DCO_AMP(PORT_PLL_DCO_AMP_DEFAULT) |
| | PORT_PLL_DCO_AMP_OVR_EN_H; |
| |
| dpll_hw_state->ebb4 = PORT_PLL_10BIT_CLK_ENABLE; |
| |
| dpll_hw_state->pcsdw12 = LANESTAGGER_STRAP_OVRD | lanestagger; |
| |
| return true; |
| } |
| |
| bool bxt_ddi_dp_set_dpll_hw_state(int clock, |
| struct intel_dpll_hw_state *dpll_hw_state) |
| { |
| struct bxt_clk_div clk_div = {0}; |
| |
| bxt_ddi_dp_pll_dividers(clock, &clk_div); |
| |
| return bxt_ddi_set_dpll_hw_state(clock, &clk_div, dpll_hw_state); |
| } |
| |
| static struct intel_shared_dpll * |
| bxt_get_dpll(struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state, |
| struct intel_encoder *encoder) |
| { |
| struct bxt_clk_div clk_div = {0}; |
| struct intel_dpll_hw_state dpll_hw_state = {0}; |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_digital_port *intel_dig_port; |
| struct intel_shared_dpll *pll; |
| int i, clock = crtc_state->port_clock; |
| |
| if (encoder->type == INTEL_OUTPUT_HDMI |
| && !bxt_ddi_hdmi_pll_dividers(crtc, crtc_state, |
| clock, &clk_div)) |
| return NULL; |
| |
| if ((encoder->type == INTEL_OUTPUT_DP || |
| encoder->type == INTEL_OUTPUT_EDP) && |
| !bxt_ddi_dp_set_dpll_hw_state(clock, &dpll_hw_state)) |
| return NULL; |
| |
| memset(&crtc_state->dpll_hw_state, 0, |
| sizeof(crtc_state->dpll_hw_state)); |
| |
| crtc_state->dpll_hw_state = dpll_hw_state; |
| |
| if (encoder->type == INTEL_OUTPUT_DP_MST) { |
| struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base); |
| |
| intel_dig_port = intel_mst->primary; |
| } else |
| intel_dig_port = enc_to_dig_port(&encoder->base); |
| |
| /* 1:1 mapping between ports and PLLs */ |
| i = (enum intel_dpll_id) intel_dig_port->port; |
| pll = intel_get_shared_dpll_by_id(dev_priv, i); |
| |
| DRM_DEBUG_KMS("[CRTC:%d:%s] using pre-allocated %s\n", |
| crtc->base.base.id, crtc->base.name, pll->name); |
| |
| intel_reference_shared_dpll(pll, crtc_state); |
| |
| return pll; |
| } |
| |
| static const struct intel_shared_dpll_funcs bxt_ddi_pll_funcs = { |
| .enable = bxt_ddi_pll_enable, |
| .disable = bxt_ddi_pll_disable, |
| .get_hw_state = bxt_ddi_pll_get_hw_state, |
| }; |
| |
| static void intel_ddi_pll_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| if (INTEL_GEN(dev_priv) < 9) { |
| uint32_t val = I915_READ(LCPLL_CTL); |
| |
| /* |
| * The LCPLL register should be turned on by the BIOS. For now |
| * let's just check its state and print errors in case |
| * something is wrong. Don't even try to turn it on. |
| */ |
| |
| if (val & LCPLL_CD_SOURCE_FCLK) |
| DRM_ERROR("CDCLK source is not LCPLL\n"); |
| |
| if (val & LCPLL_PLL_DISABLE) |
| DRM_ERROR("LCPLL is disabled\n"); |
| } |
| } |
| |
| struct dpll_info { |
| const char *name; |
| const int id; |
| const struct intel_shared_dpll_funcs *funcs; |
| uint32_t flags; |
| }; |
| |
| struct intel_dpll_mgr { |
| const struct dpll_info *dpll_info; |
| |
| struct intel_shared_dpll *(*get_dpll)(struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state, |
| struct intel_encoder *encoder); |
| }; |
| |
| static const struct dpll_info pch_plls[] = { |
| { "PCH DPLL A", DPLL_ID_PCH_PLL_A, &ibx_pch_dpll_funcs, 0 }, |
| { "PCH DPLL B", DPLL_ID_PCH_PLL_B, &ibx_pch_dpll_funcs, 0 }, |
| { NULL, -1, NULL, 0 }, |
| }; |
| |
| static const struct intel_dpll_mgr pch_pll_mgr = { |
| .dpll_info = pch_plls, |
| .get_dpll = ibx_get_dpll, |
| }; |
| |
| static const struct dpll_info hsw_plls[] = { |
| { "WRPLL 1", DPLL_ID_WRPLL1, &hsw_ddi_wrpll_funcs, 0 }, |
| { "WRPLL 2", DPLL_ID_WRPLL2, &hsw_ddi_wrpll_funcs, 0 }, |
| { "SPLL", DPLL_ID_SPLL, &hsw_ddi_spll_funcs, 0 }, |
| { "LCPLL 810", DPLL_ID_LCPLL_810, &hsw_ddi_lcpll_funcs, INTEL_DPLL_ALWAYS_ON }, |
| { "LCPLL 1350", DPLL_ID_LCPLL_1350, &hsw_ddi_lcpll_funcs, INTEL_DPLL_ALWAYS_ON }, |
| { "LCPLL 2700", DPLL_ID_LCPLL_2700, &hsw_ddi_lcpll_funcs, INTEL_DPLL_ALWAYS_ON }, |
| { NULL, -1, NULL, }, |
| }; |
| |
| static const struct intel_dpll_mgr hsw_pll_mgr = { |
| .dpll_info = hsw_plls, |
| .get_dpll = hsw_get_dpll, |
| }; |
| |
| static const struct dpll_info skl_plls[] = { |
| { "DPLL 0", DPLL_ID_SKL_DPLL0, &skl_ddi_dpll0_funcs, INTEL_DPLL_ALWAYS_ON }, |
| { "DPLL 1", DPLL_ID_SKL_DPLL1, &skl_ddi_pll_funcs, 0 }, |
| { "DPLL 2", DPLL_ID_SKL_DPLL2, &skl_ddi_pll_funcs, 0 }, |
| { "DPLL 3", DPLL_ID_SKL_DPLL3, &skl_ddi_pll_funcs, 0 }, |
| { NULL, -1, NULL, }, |
| }; |
| |
| static const struct intel_dpll_mgr skl_pll_mgr = { |
| .dpll_info = skl_plls, |
| .get_dpll = skl_get_dpll, |
| }; |
| |
| static const struct dpll_info bxt_plls[] = { |
| { "PORT PLL A", DPLL_ID_SKL_DPLL0, &bxt_ddi_pll_funcs, 0 }, |
| { "PORT PLL B", DPLL_ID_SKL_DPLL1, &bxt_ddi_pll_funcs, 0 }, |
| { "PORT PLL C", DPLL_ID_SKL_DPLL2, &bxt_ddi_pll_funcs, 0 }, |
| { NULL, -1, NULL, }, |
| }; |
| |
| static const struct intel_dpll_mgr bxt_pll_mgr = { |
| .dpll_info = bxt_plls, |
| .get_dpll = bxt_get_dpll, |
| }; |
| |
| void intel_shared_dpll_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| const struct intel_dpll_mgr *dpll_mgr = NULL; |
| const struct dpll_info *dpll_info; |
| int i; |
| |
| if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) |
| dpll_mgr = &skl_pll_mgr; |
| else if (IS_BROXTON(dev)) |
| dpll_mgr = &bxt_pll_mgr; |
| else if (HAS_DDI(dev)) |
| dpll_mgr = &hsw_pll_mgr; |
| else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) |
| dpll_mgr = &pch_pll_mgr; |
| |
| if (!dpll_mgr) { |
| dev_priv->num_shared_dpll = 0; |
| return; |
| } |
| |
| dpll_info = dpll_mgr->dpll_info; |
| |
| for (i = 0; dpll_info[i].id >= 0; i++) { |
| WARN_ON(i != dpll_info[i].id); |
| |
| dev_priv->shared_dplls[i].id = dpll_info[i].id; |
| dev_priv->shared_dplls[i].name = dpll_info[i].name; |
| dev_priv->shared_dplls[i].funcs = *dpll_info[i].funcs; |
| dev_priv->shared_dplls[i].flags = dpll_info[i].flags; |
| } |
| |
| dev_priv->dpll_mgr = dpll_mgr; |
| dev_priv->num_shared_dpll = i; |
| mutex_init(&dev_priv->dpll_lock); |
| |
| BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS); |
| |
| /* FIXME: Move this to a more suitable place */ |
| if (HAS_DDI(dev)) |
| intel_ddi_pll_init(dev); |
| } |
| |
| struct intel_shared_dpll * |
| intel_get_shared_dpll(struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state, |
| struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| const struct intel_dpll_mgr *dpll_mgr = dev_priv->dpll_mgr; |
| |
| if (WARN_ON(!dpll_mgr)) |
| return NULL; |
| |
| return dpll_mgr->get_dpll(crtc, crtc_state, encoder); |
| } |