| # |
| # PHY |
| # |
| |
| menu "PHY Subsystem" |
| |
| config GENERIC_PHY |
| bool "PHY Core" |
| help |
| Generic PHY support. |
| |
| This framework is designed to provide a generic interface for PHY |
| devices present in the kernel. This layer will have the generic |
| API by which phy drivers can create PHY using the phy framework and |
| phy users can obtain reference to the PHY. All the users of this |
| framework should select this config. |
| |
| config PHY_BERLIN_USB |
| tristate "Marvell Berlin USB PHY Driver" |
| depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF |
| select GENERIC_PHY |
| help |
| Enable this to support the USB PHY on Marvell Berlin SoCs. |
| |
| config PHY_BERLIN_SATA |
| tristate "Marvell Berlin SATA PHY driver" |
| depends on ARCH_BERLIN && HAS_IOMEM && OF |
| select GENERIC_PHY |
| help |
| Enable this to support the SATA PHY on Marvell Berlin SoCs. |
| |
| config ARMADA375_USBCLUSTER_PHY |
| def_bool y |
| depends on MACH_ARMADA_375 || COMPILE_TEST |
| depends on OF |
| select GENERIC_PHY |
| |
| config PHY_DM816X_USB |
| tristate "TI dm816x USB PHY driver" |
| depends on ARCH_OMAP2PLUS |
| select GENERIC_PHY |
| help |
| Enable this for dm816x USB to work. |
| |
| config PHY_EXYNOS_MIPI_VIDEO |
| tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" |
| depends on HAS_IOMEM |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| select GENERIC_PHY |
| default y if ARCH_S5PV210 || ARCH_EXYNOS |
| help |
| Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P |
| and EXYNOS SoCs. |
| |
| config PHY_MVEBU_SATA |
| def_bool y |
| depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD |
| depends on OF |
| select GENERIC_PHY |
| |
| config PHY_MIPHY28LP |
| tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" |
| depends on ARCH_STI |
| select GENERIC_PHY |
| help |
| Enable this to support the miphy transceiver (for SATA/PCIE/USB3) |
| that is part of STMicroelectronics STiH407 SoC. |
| |
| config PHY_MIPHY365X |
| tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" |
| depends on ARCH_STI |
| depends on HAS_IOMEM |
| depends on OF |
| select GENERIC_PHY |
| help |
| Enable this to support the miphy transceiver (for SATA/PCIE) |
| that is part of STMicroelectronics STiH41x SoC series. |
| |
| config PHY_RCAR_GEN2 |
| tristate "Renesas R-Car generation 2 USB PHY driver" |
| depends on ARCH_SHMOBILE |
| depends on GENERIC_PHY |
| help |
| Support for USB PHY found on Renesas R-Car generation 2 SoCs. |
| |
| config OMAP_CONTROL_PHY |
| tristate "OMAP CONTROL PHY Driver" |
| depends on ARCH_OMAP2PLUS || COMPILE_TEST |
| help |
| Enable this to add support for the PHY part present in the control |
| module. This driver has API to power on the USB2 PHY and to write to |
| the mailbox. The mailbox is present only in omap4 and the register to |
| power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an |
| additional register to power on USB3 PHY/SATA PHY/PCIE PHY |
| (PIPE3 PHY). |
| |
| config OMAP_USB2 |
| tristate "OMAP USB2 PHY Driver" |
| depends on ARCH_OMAP2PLUS |
| depends on USB_PHY |
| select GENERIC_PHY |
| select OMAP_CONTROL_PHY |
| depends on OMAP_OCP2SCP |
| help |
| Enable this to support the transceiver that is part of SOC. This |
| driver takes care of all the PHY functionality apart from comparator. |
| The USB OTG controller communicates with the comparator using this |
| driver. |
| |
| config TI_PIPE3 |
| tristate "TI PIPE3 PHY Driver" |
| depends on ARCH_OMAP2PLUS || COMPILE_TEST |
| select GENERIC_PHY |
| select OMAP_CONTROL_PHY |
| depends on OMAP_OCP2SCP |
| help |
| Enable this to support the PIPE3 PHY that is part of TI SOCs. This |
| driver takes care of all the PHY functionality apart from comparator. |
| This driver interacts with the "OMAP Control PHY Driver" to power |
| on/off the PHY. |
| |
| config TWL4030_USB |
| tristate "TWL4030 USB Transceiver Driver" |
| depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS |
| depends on USB_PHY |
| select GENERIC_PHY |
| help |
| Enable this to support the USB OTG transceiver on TWL4030 |
| family chips (including the TWL5030 and TPS659x0 devices). |
| This transceiver supports high and full speed devices plus, |
| in host mode, low speed. |
| |
| config PHY_EXYNOS_DP_VIDEO |
| tristate "EXYNOS SoC series Display Port PHY driver" |
| depends on OF |
| depends on ARCH_EXYNOS || COMPILE_TEST |
| default ARCH_EXYNOS |
| select GENERIC_PHY |
| help |
| Support for Display Port PHY found on Samsung EXYNOS SoCs. |
| |
| config BCM_KONA_USB2_PHY |
| tristate "Broadcom Kona USB2 PHY Driver" |
| depends on HAS_IOMEM |
| select GENERIC_PHY |
| help |
| Enable this to support the Broadcom Kona USB 2.0 PHY. |
| |
| config PHY_EXYNOS5250_SATA |
| tristate "Exynos5250 Sata SerDes/PHY driver" |
| depends on SOC_EXYNOS5250 |
| depends on HAS_IOMEM |
| depends on OF |
| select GENERIC_PHY |
| select I2C |
| select I2C_S3C2410 |
| select MFD_SYSCON |
| help |
| Enable this to support SATA SerDes/Phy found on Samsung's |
| Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, |
| SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host |
| port to accept one SATA device. |
| |
| config PHY_HIX5HD2_SATA |
| tristate "HIX5HD2 SATA PHY Driver" |
| depends on ARCH_HIX5HD2 && OF && HAS_IOMEM |
| select GENERIC_PHY |
| select MFD_SYSCON |
| help |
| Support for SATA PHY on Hisilicon hix5hd2 Soc. |
| |
| config PHY_SUN4I_USB |
| tristate "Allwinner sunxi SoC USB PHY driver" |
| depends on ARCH_SUNXI && HAS_IOMEM && OF |
| depends on RESET_CONTROLLER |
| select GENERIC_PHY |
| help |
| Enable this to support the transceiver that is part of Allwinner |
| sunxi SoCs. |
| |
| This driver controls the entire USB PHY block, both the USB OTG |
| parts, as well as the 2 regular USB 2 host PHYs. |
| |
| config PHY_SUN9I_USB |
| tristate "Allwinner sun9i SoC USB PHY driver" |
| depends on ARCH_SUNXI && HAS_IOMEM && OF |
| depends on RESET_CONTROLLER |
| select GENERIC_PHY |
| help |
| Enable this to support the transceiver that is part of Allwinner |
| sun9i SoCs. |
| |
| This driver controls each individual USB 2 host PHY. |
| |
| config PHY_SAMSUNG_USB2 |
| tristate "Samsung USB 2.0 PHY driver" |
| depends on HAS_IOMEM |
| depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 |
| select GENERIC_PHY |
| select MFD_SYSCON |
| default ARCH_EXYNOS |
| help |
| Enable this to support the Samsung USB 2.0 PHY driver for Samsung |
| SoCs. This driver provides the interface for USB 2.0 PHY. Support |
| for particular PHYs will be enabled based on the SoC type in addition |
| to this driver. |
| |
| config PHY_S5PV210_USB2 |
| bool "Support for S5PV210" |
| depends on PHY_SAMSUNG_USB2 |
| depends on ARCH_S5PV210 |
| help |
| Enable USB PHY support for S5PV210. This option requires that Samsung |
| USB 2.0 PHY driver is enabled and means that support for this |
| particular SoC is compiled in the driver. In case of S5PV210 two phys |
| are available - device and host. |
| |
| config PHY_EXYNOS4210_USB2 |
| bool |
| depends on PHY_SAMSUNG_USB2 |
| default CPU_EXYNOS4210 |
| |
| config PHY_EXYNOS4X12_USB2 |
| bool |
| depends on PHY_SAMSUNG_USB2 |
| default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 |
| |
| config PHY_EXYNOS5250_USB2 |
| bool |
| depends on PHY_SAMSUNG_USB2 |
| default SOC_EXYNOS5250 || SOC_EXYNOS5420 |
| |
| config PHY_EXYNOS5_USBDRD |
| tristate "Exynos5 SoC series USB DRD PHY driver" |
| depends on ARCH_EXYNOS && OF |
| depends on HAS_IOMEM |
| depends on USB_DWC3_EXYNOS |
| select GENERIC_PHY |
| select MFD_SYSCON |
| default y |
| help |
| Enable USB DRD PHY support for Exynos 5 SoC series. |
| This driver provides PHY interface for USB 3.0 DRD controller |
| present on Exynos5 SoC series. |
| |
| config PHY_QCOM_APQ8064_SATA |
| tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" |
| depends on ARCH_QCOM |
| depends on HAS_IOMEM |
| depends on OF |
| select GENERIC_PHY |
| |
| config PHY_QCOM_IPQ806X_SATA |
| tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" |
| depends on ARCH_QCOM |
| depends on HAS_IOMEM |
| depends on OF |
| select GENERIC_PHY |
| |
| config PHY_ROCKCHIP_USB |
| tristate "Rockchip USB2 PHY Driver" |
| depends on ARCH_ROCKCHIP && OF |
| select GENERIC_PHY |
| help |
| Enable this to support the Rockchip USB 2.0 PHY. |
| |
| config PHY_ST_SPEAR1310_MIPHY |
| tristate "ST SPEAR1310-MIPHY driver" |
| select GENERIC_PHY |
| depends on MACH_SPEAR1310 || COMPILE_TEST |
| help |
| Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. |
| |
| config PHY_ST_SPEAR1340_MIPHY |
| tristate "ST SPEAR1340-MIPHY driver" |
| select GENERIC_PHY |
| depends on MACH_SPEAR1340 || COMPILE_TEST |
| help |
| Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. |
| |
| config PHY_XGENE |
| tristate "APM X-Gene 15Gbps PHY support" |
| depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) |
| select GENERIC_PHY |
| help |
| This option enables support for APM X-Gene SoC multi-purpose PHY. |
| |
| config PHY_STIH407_USB |
| tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" |
| depends on RESET_CONTROLLER |
| depends on ARCH_STI || COMPILE_TEST |
| select GENERIC_PHY |
| help |
| Enable this support to enable the picoPHY device used by USB2 |
| and USB3 controllers on STMicroelectronics STiH407 SoC families. |
| |
| config PHY_STIH41X_USB |
| tristate "STMicroelectronics USB2 PHY driver for STiH41x series" |
| depends on ARCH_STI |
| select GENERIC_PHY |
| help |
| Enable this to support the USB transceiver that is part of |
| STMicroelectronics STiH41x SoC series. |
| |
| config PHY_QCOM_UFS |
| tristate "Qualcomm UFS PHY driver" |
| depends on OF && ARCH_MSM |
| select GENERIC_PHY |
| help |
| Support for UFS PHY on QCOM chipsets. |
| |
| endmenu |