MIPS: TXx9: Add ACLC support
Add platform support for ACLC of TXx9 SoCs.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 6b681cd..3418b2a 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -265,6 +265,49 @@
TXX9_IRQ_BASE + TX4927_IR_DMA(0), &plat_data);
}
+void __init tx4927_aclc_init(unsigned int dma_chan_out,
+ unsigned int dma_chan_in)
+{
+ u64 pcfg = __raw_readq(&tx4927_ccfgptr->pcfg);
+ __u64 dmasel_mask = 0, dmasel = 0;
+ unsigned long flags;
+
+ if (!(pcfg & TX4927_PCFG_SEL2))
+ return;
+ /* setup DMASEL (playback:ACLC ch0, capture:ACLC ch1) */
+ switch (dma_chan_out) {
+ case 0:
+ dmasel_mask |= TX4927_PCFG_DMASEL0_MASK;
+ dmasel |= TX4927_PCFG_DMASEL0_ACL0;
+ break;
+ case 2:
+ dmasel_mask |= TX4927_PCFG_DMASEL2_MASK;
+ dmasel |= TX4927_PCFG_DMASEL2_ACL0;
+ break;
+ default:
+ return;
+ }
+ switch (dma_chan_in) {
+ case 1:
+ dmasel_mask |= TX4927_PCFG_DMASEL1_MASK;
+ dmasel |= TX4927_PCFG_DMASEL1_ACL1;
+ break;
+ case 3:
+ dmasel_mask |= TX4927_PCFG_DMASEL3_MASK;
+ dmasel |= TX4927_PCFG_DMASEL3_ACL1;
+ break;
+ default:
+ return;
+ }
+ local_irq_save(flags);
+ txx9_clear64(&tx4927_ccfgptr->pcfg, dmasel_mask);
+ txx9_set64(&tx4927_ccfgptr->pcfg, dmasel);
+ local_irq_restore(flags);
+ txx9_aclc_init(TX4927_ACLC_REG & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4927_IR_ACLC,
+ 0, dma_chan_out, dma_chan_in);
+}
+
static void __init tx4927_stop_unused_modules(void)
{
__u64 pcfg, rst = 0, ckd = 0;