| /********************************************************************* |
| * |
| * Filename: netwave_cs.c |
| * Version: 0.4.1 |
| * Description: Netwave AirSurfer Wireless LAN PC Card driver |
| * Status: Experimental. |
| * Authors: John Markus Bjørndalen <johnm@cs.uit.no> |
| * Dag Brattli <dagb@cs.uit.no> |
| * David Hinds <dahinds@users.sourceforge.net> |
| * Created at: A long time ago! |
| * Modified at: Mon Nov 10 11:54:37 1997 |
| * Modified by: Dag Brattli <dagb@cs.uit.no> |
| * |
| * Copyright (c) 1997 University of Tromsø, Norway |
| * |
| * Revision History: |
| * |
| * 08-Nov-97 15:14:47 John Markus Bjørndalen <johnm@cs.uit.no> |
| * - Fixed some bugs in netwave_rx and cleaned it up a bit. |
| * (One of the bugs would have destroyed packets when receiving |
| * multiple packets per interrupt). |
| * - Cleaned up parts of newave_hw_xmit. |
| * - A few general cleanups. |
| * 24-Oct-97 13:17:36 Dag Brattli <dagb@cs.uit.no> |
| * - Fixed netwave_rx receive function (got updated docs) |
| * Others: |
| * - Changed name from xircnw to netwave, take a look at |
| * http://www.netwave-wireless.com |
| * - Some reorganizing of the code |
| * - Removed possible race condition between interrupt handler and transmit |
| * function |
| * - Started to add wireless extensions, but still needs some coding |
| * - Added watchdog for better handling of transmission timeouts |
| * (hopefully this works better) |
| ********************************************************************/ |
| |
| /* To have statistics (just packets sent) define this */ |
| #undef NETWAVE_STATS |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/interrupt.h> |
| #include <linux/ptrace.h> |
| #include <linux/ioport.h> |
| #include <linux/in.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/errno.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/bitops.h> |
| #include <linux/wireless.h> |
| #include <net/iw_handler.h> |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/cisreg.h> |
| #include <pcmcia/ds.h> |
| #include <pcmcia/mem_op.h> |
| |
| #include <asm/system.h> |
| #include <asm/io.h> |
| #include <asm/dma.h> |
| |
| #define NETWAVE_REGOFF 0x8000 |
| /* The Netwave IO registers, offsets to iobase */ |
| #define NETWAVE_REG_COR 0x0 |
| #define NETWAVE_REG_CCSR 0x2 |
| #define NETWAVE_REG_ASR 0x4 |
| #define NETWAVE_REG_IMR 0xa |
| #define NETWAVE_REG_PMR 0xc |
| #define NETWAVE_REG_IOLOW 0x6 |
| #define NETWAVE_REG_IOHI 0x7 |
| #define NETWAVE_REG_IOCONTROL 0x8 |
| #define NETWAVE_REG_DATA 0xf |
| /* The Netwave Extended IO registers, offsets to RamBase */ |
| #define NETWAVE_EREG_ASCC 0x114 |
| #define NETWAVE_EREG_RSER 0x120 |
| #define NETWAVE_EREG_RSERW 0x124 |
| #define NETWAVE_EREG_TSER 0x130 |
| #define NETWAVE_EREG_TSERW 0x134 |
| #define NETWAVE_EREG_CB 0x100 |
| #define NETWAVE_EREG_SPCQ 0x154 |
| #define NETWAVE_EREG_SPU 0x155 |
| #define NETWAVE_EREG_LIF 0x14e |
| #define NETWAVE_EREG_ISPLQ 0x156 |
| #define NETWAVE_EREG_HHC 0x158 |
| #define NETWAVE_EREG_NI 0x16e |
| #define NETWAVE_EREG_MHS 0x16b |
| #define NETWAVE_EREG_TDP 0x140 |
| #define NETWAVE_EREG_RDP 0x150 |
| #define NETWAVE_EREG_PA 0x160 |
| #define NETWAVE_EREG_EC 0x180 |
| #define NETWAVE_EREG_CRBP 0x17a |
| #define NETWAVE_EREG_ARW 0x166 |
| |
| /* |
| * Commands used in the extended command buffer |
| * NETWAVE_EREG_CB (0x100-0x10F) |
| */ |
| #define NETWAVE_CMD_NOP 0x00 |
| #define NETWAVE_CMD_SRC 0x01 |
| #define NETWAVE_CMD_STC 0x02 |
| #define NETWAVE_CMD_AMA 0x03 |
| #define NETWAVE_CMD_DMA 0x04 |
| #define NETWAVE_CMD_SAMA 0x05 |
| #define NETWAVE_CMD_ER 0x06 |
| #define NETWAVE_CMD_DR 0x07 |
| #define NETWAVE_CMD_TL 0x08 |
| #define NETWAVE_CMD_SRP 0x09 |
| #define NETWAVE_CMD_SSK 0x0a |
| #define NETWAVE_CMD_SMD 0x0b |
| #define NETWAVE_CMD_SAPD 0x0c |
| #define NETWAVE_CMD_SSS 0x11 |
| /* End of Command marker */ |
| #define NETWAVE_CMD_EOC 0x00 |
| |
| /* ASR register bits */ |
| #define NETWAVE_ASR_RXRDY 0x80 |
| #define NETWAVE_ASR_TXBA 0x01 |
| |
| #define TX_TIMEOUT ((32*HZ)/100) |
| |
| static const unsigned int imrConfRFU1 = 0x10; /* RFU interrupt mask, keep high */ |
| static const unsigned int imrConfIENA = 0x02; /* Interrupt enable */ |
| |
| static const unsigned int corConfIENA = 0x01; /* Interrupt enable */ |
| static const unsigned int corConfLVLREQ = 0x40; /* Keep high */ |
| |
| static const unsigned int rxConfRxEna = 0x80; /* Receive Enable */ |
| static const unsigned int rxConfMAC = 0x20; /* MAC host receive mode*/ |
| static const unsigned int rxConfPro = 0x10; /* Promiscuous */ |
| static const unsigned int rxConfAMP = 0x08; /* Accept Multicast Packets */ |
| static const unsigned int rxConfBcast = 0x04; /* Accept Broadcast Packets */ |
| |
| static const unsigned int txConfTxEna = 0x80; /* Transmit Enable */ |
| static const unsigned int txConfMAC = 0x20; /* Host sends MAC mode */ |
| static const unsigned int txConfEUD = 0x10; /* Enable Uni-Data packets */ |
| static const unsigned int txConfKey = 0x02; /* Scramble data packets */ |
| static const unsigned int txConfLoop = 0x01; /* Loopback mode */ |
| |
| /* |
| All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If |
| you do not define PCMCIA_DEBUG at all, all the debug code will be |
| left out. If you compile with PCMCIA_DEBUG=0, the debug code will |
| be present but disabled -- but it can then be enabled for specific |
| modules at load time with a 'pc_debug=#' option to insmod. |
| */ |
| |
| #ifdef PCMCIA_DEBUG |
| static int pc_debug = PCMCIA_DEBUG; |
| module_param(pc_debug, int, 0); |
| #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) |
| static char *version = |
| "netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n"; |
| #else |
| #define DEBUG(n, args...) |
| #endif |
| |
| /*====================================================================*/ |
| |
| /* Parameters that can be set with 'insmod' */ |
| |
| /* Choose the domain, default is 0x100 */ |
| static u_int domain = 0x100; |
| |
| /* Scramble key, range from 0x0 to 0xffff. |
| * 0x0 is no scrambling. |
| */ |
| static u_int scramble_key = 0x0; |
| |
| /* Shared memory speed, in ns. The documentation states that |
| * the card should not be read faster than every 400ns. |
| * This timing should be provided by the HBA. If it becomes a |
| * problem, try setting mem_speed to 400. |
| */ |
| static int mem_speed; |
| |
| module_param(domain, int, 0); |
| module_param(scramble_key, int, 0); |
| module_param(mem_speed, int, 0); |
| |
| /*====================================================================*/ |
| |
| /* PCMCIA (Card Services) related functions */ |
| static void netwave_release(struct pcmcia_device *link); /* Card removal */ |
| static int netwave_pcmcia_config(struct pcmcia_device *arg); /* Runs after card |
| insertion */ |
| static void netwave_detach(struct pcmcia_device *p_dev); /* Destroy instance */ |
| |
| /* Hardware configuration */ |
| static void netwave_doreset(unsigned int iobase, u_char __iomem *ramBase); |
| static void netwave_reset(struct net_device *dev); |
| |
| /* Misc device stuff */ |
| static int netwave_open(struct net_device *dev); /* Open the device */ |
| static int netwave_close(struct net_device *dev); /* Close the device */ |
| |
| /* Packet transmission and Packet reception */ |
| static int netwave_start_xmit( struct sk_buff *skb, struct net_device *dev); |
| static int netwave_rx( struct net_device *dev); |
| |
| /* Interrupt routines */ |
| static irqreturn_t netwave_interrupt(int irq, void *dev_id); |
| static void netwave_watchdog(struct net_device *); |
| |
| /* Statistics */ |
| static void update_stats(struct net_device *dev); |
| static struct net_device_stats *netwave_get_stats(struct net_device *dev); |
| |
| /* Wireless extensions */ |
| static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev); |
| |
| static void set_multicast_list(struct net_device *dev); |
| |
| /* |
| A struct pcmcia_device structure has fields for most things that are needed |
| to keep track of a socket, but there will usually be some device |
| specific information that also needs to be kept track of. The |
| 'priv' pointer in a struct pcmcia_device structure can be used to point to |
| a device-specific private data structure, like this. |
| |
| A driver needs to provide a dev_node_t structure for each device |
| on a card. In some cases, there is only one device per card (for |
| example, ethernet cards, modems). In other cases, there may be |
| many actual or logical devices (SCSI adapters, memory cards with |
| multiple partitions). The dev_node_t structures need to be kept |
| in a linked list starting at the 'dev' field of a struct pcmcia_device |
| structure. We allocate them in the card's private data structure, |
| because they generally can't be allocated dynamically. |
| */ |
| |
| static const struct iw_handler_def netwave_handler_def; |
| |
| #define SIOCGIPSNAP SIOCIWFIRSTPRIV + 1 /* Site Survey Snapshot */ |
| |
| #define MAX_ESA 10 |
| |
| typedef struct net_addr { |
| u_char addr48[6]; |
| } net_addr; |
| |
| struct site_survey { |
| u_short length; |
| u_char struct_revision; |
| u_char roaming_state; |
| |
| u_char sp_existsFlag; |
| u_char sp_link_quality; |
| u_char sp_max_link_quality; |
| u_char linkQualityGoodFairBoundary; |
| u_char linkQualityFairPoorBoundary; |
| u_char sp_utilization; |
| u_char sp_goodness; |
| u_char sp_hotheadcount; |
| u_char roaming_condition; |
| |
| net_addr sp; |
| u_char numAPs; |
| net_addr nearByAccessPoints[MAX_ESA]; |
| }; |
| |
| typedef struct netwave_private { |
| struct pcmcia_device *p_dev; |
| spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ |
| dev_node_t node; |
| u_char __iomem *ramBase; |
| int timeoutCounter; |
| int lastExec; |
| struct timer_list watchdog; /* To avoid blocking state */ |
| struct site_survey nss; |
| struct net_device_stats stats; |
| struct iw_statistics iw_stats; /* Wireless stats */ |
| } netwave_private; |
| |
| #ifdef NETWAVE_STATS |
| static struct net_device_stats *netwave_get_stats(struct net_device *dev); |
| #endif |
| |
| /* |
| * The Netwave card is little-endian, so won't work for big endian |
| * systems. |
| */ |
| static inline unsigned short get_uint16(u_char __iomem *staddr) |
| { |
| return readw(staddr); /* Return only 16 bits */ |
| } |
| |
| static inline short get_int16(u_char __iomem * staddr) |
| { |
| return readw(staddr); |
| } |
| |
| /* |
| * Wait until the WOC (Write Operation Complete) bit in the |
| * ASR (Adapter Status Register) is asserted. |
| * This should have aborted if it takes too long time. |
| */ |
| static inline void wait_WOC(unsigned int iobase) |
| { |
| /* Spin lock */ |
| while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ; |
| } |
| |
| static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, |
| unsigned int iobase) { |
| u_short resultBuffer; |
| |
| /* if time since last snapshot is > 1 sec. (100 jiffies?) then take |
| * new snapshot, else return cached data. This is the recommended rate. |
| */ |
| if ( jiffies - priv->lastExec > 100) { |
| /* Take site survey snapshot */ |
| /*printk( KERN_DEBUG "Taking new snapshot. %ld\n", jiffies - |
| priv->lastExec); */ |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_SSS, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); |
| wait_WOC(iobase); |
| |
| /* Get result and copy to cach */ |
| resultBuffer = readw(ramBase + NETWAVE_EREG_CRBP); |
| copy_from_pc( &priv->nss, ramBase+resultBuffer, |
| sizeof(struct site_survey)); |
| } |
| } |
| |
| /* |
| * Function netwave_get_wireless_stats (dev) |
| * |
| * Wireless extensions statistics |
| * |
| */ |
| static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev) |
| { |
| unsigned long flags; |
| unsigned int iobase = dev->base_addr; |
| netwave_private *priv = netdev_priv(dev); |
| u_char __iomem *ramBase = priv->ramBase; |
| struct iw_statistics* wstats; |
| |
| wstats = &priv->iw_stats; |
| |
| spin_lock_irqsave(&priv->spinlock, flags); |
| |
| netwave_snapshot( priv, ramBase, iobase); |
| |
| wstats->status = priv->nss.roaming_state; |
| wstats->qual.qual = readb( ramBase + NETWAVE_EREG_SPCQ); |
| wstats->qual.level = readb( ramBase + NETWAVE_EREG_ISPLQ); |
| wstats->qual.noise = readb( ramBase + NETWAVE_EREG_SPU) & 0x3f; |
| wstats->discard.nwid = 0L; |
| wstats->discard.code = 0L; |
| wstats->discard.misc = 0L; |
| |
| spin_unlock_irqrestore(&priv->spinlock, flags); |
| |
| return &priv->iw_stats; |
| } |
| |
| /* |
| * Function netwave_attach (void) |
| * |
| * Creates an "instance" of the driver, allocating local data |
| * structures for one device. The device is registered with Card |
| * Services. |
| * |
| * The dev_link structure is initialized, but we don't actually |
| * configure the card at this point -- we wait until we receive a |
| * card insertion event. |
| */ |
| static int netwave_probe(struct pcmcia_device *link) |
| { |
| struct net_device *dev; |
| netwave_private *priv; |
| |
| DEBUG(0, "netwave_attach()\n"); |
| |
| /* Initialize the struct pcmcia_device structure */ |
| dev = alloc_etherdev(sizeof(netwave_private)); |
| if (!dev) |
| return -ENOMEM; |
| priv = netdev_priv(dev); |
| priv->p_dev = link; |
| link->priv = dev; |
| |
| /* The io structure describes IO port mapping */ |
| link->io.NumPorts1 = 16; |
| link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; |
| /* link->io.NumPorts2 = 16; |
| link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */ |
| link->io.IOAddrLines = 5; |
| |
| /* Interrupt setup */ |
| link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; |
| link->irq.IRQInfo1 = IRQ_LEVEL_ID; |
| link->irq.Handler = &netwave_interrupt; |
| |
| /* General socket configuration */ |
| link->conf.Attributes = CONF_ENABLE_IRQ; |
| link->conf.IntType = INT_MEMORY_AND_IO; |
| link->conf.ConfigIndex = 1; |
| |
| /* Netwave private struct init. link/dev/node already taken care of, |
| * other stuff zero'd - Jean II */ |
| spin_lock_init(&priv->spinlock); |
| |
| /* Netwave specific entries in the device structure */ |
| dev->hard_start_xmit = &netwave_start_xmit; |
| dev->get_stats = &netwave_get_stats; |
| dev->set_multicast_list = &set_multicast_list; |
| /* wireless extensions */ |
| dev->wireless_handlers = (struct iw_handler_def *)&netwave_handler_def; |
| |
| dev->tx_timeout = &netwave_watchdog; |
| dev->watchdog_timeo = TX_TIMEOUT; |
| |
| dev->open = &netwave_open; |
| dev->stop = &netwave_close; |
| link->irq.Instance = dev; |
| |
| return netwave_pcmcia_config( link); |
| } /* netwave_attach */ |
| |
| /* |
| * Function netwave_detach (link) |
| * |
| * This deletes a driver "instance". The device is de-registered |
| * with Card Services. If it has been released, all local data |
| * structures are freed. Otherwise, the structures will be freed |
| * when the device is released. |
| */ |
| static void netwave_detach(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| |
| DEBUG(0, "netwave_detach(0x%p)\n", link); |
| |
| netwave_release(link); |
| |
| if (link->dev_node) |
| unregister_netdev(dev); |
| |
| free_netdev(dev); |
| } /* netwave_detach */ |
| |
| /* |
| * Wireless Handler : get protocol name |
| */ |
| static int netwave_get_name(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| strcpy(wrqu->name, "Netwave"); |
| return 0; |
| } |
| |
| /* |
| * Wireless Handler : set Network ID |
| */ |
| static int netwave_set_nwid(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| unsigned long flags; |
| unsigned int iobase = dev->base_addr; |
| netwave_private *priv = netdev_priv(dev); |
| u_char __iomem *ramBase = priv->ramBase; |
| |
| /* Disable interrupts & save flags */ |
| spin_lock_irqsave(&priv->spinlock, flags); |
| |
| if(!wrqu->nwid.disabled) { |
| domain = wrqu->nwid.value; |
| printk( KERN_DEBUG "Setting domain to 0x%x%02x\n", |
| (domain >> 8) & 0x01, domain & 0xff); |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0); |
| writeb( domain & 0xff, ramBase + NETWAVE_EREG_CB + 1); |
| writeb((domain >>8 ) & 0x01,ramBase + NETWAVE_EREG_CB+2); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); |
| } |
| |
| /* ReEnable interrupts & restore flags */ |
| spin_unlock_irqrestore(&priv->spinlock, flags); |
| |
| return 0; |
| } |
| |
| /* |
| * Wireless Handler : get Network ID |
| */ |
| static int netwave_get_nwid(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| wrqu->nwid.value = domain; |
| wrqu->nwid.disabled = 0; |
| wrqu->nwid.fixed = 1; |
| return 0; |
| } |
| |
| /* |
| * Wireless Handler : set scramble key |
| */ |
| static int netwave_set_scramble(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *key) |
| { |
| unsigned long flags; |
| unsigned int iobase = dev->base_addr; |
| netwave_private *priv = netdev_priv(dev); |
| u_char __iomem *ramBase = priv->ramBase; |
| |
| /* Disable interrupts & save flags */ |
| spin_lock_irqsave(&priv->spinlock, flags); |
| |
| scramble_key = (key[0] << 8) | key[1]; |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1); |
| writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); |
| |
| /* ReEnable interrupts & restore flags */ |
| spin_unlock_irqrestore(&priv->spinlock, flags); |
| |
| return 0; |
| } |
| |
| /* |
| * Wireless Handler : get scramble key |
| */ |
| static int netwave_get_scramble(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *key) |
| { |
| key[1] = scramble_key & 0xff; |
| key[0] = (scramble_key>>8) & 0xff; |
| wrqu->encoding.flags = IW_ENCODE_ENABLED; |
| wrqu->encoding.length = 2; |
| return 0; |
| } |
| |
| /* |
| * Wireless Handler : get mode |
| */ |
| static int netwave_get_mode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| if(domain & 0x100) |
| wrqu->mode = IW_MODE_INFRA; |
| else |
| wrqu->mode = IW_MODE_ADHOC; |
| |
| return 0; |
| } |
| |
| /* |
| * Wireless Handler : get range info |
| */ |
| static int netwave_get_range(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| struct iw_range *range = (struct iw_range *) extra; |
| int ret = 0; |
| |
| /* Set the length (very important for backward compatibility) */ |
| wrqu->data.length = sizeof(struct iw_range); |
| |
| /* Set all the info we don't care or don't know about to zero */ |
| memset(range, 0, sizeof(struct iw_range)); |
| |
| /* Set the Wireless Extension versions */ |
| range->we_version_compiled = WIRELESS_EXT; |
| range->we_version_source = 9; /* Nothing for us in v10 and v11 */ |
| |
| /* Set information in the range struct */ |
| range->throughput = 450 * 1000; /* don't argue on this ! */ |
| range->min_nwid = 0x0000; |
| range->max_nwid = 0x01FF; |
| |
| range->num_channels = range->num_frequency = 0; |
| |
| range->sensitivity = 0x3F; |
| range->max_qual.qual = 255; |
| range->max_qual.level = 255; |
| range->max_qual.noise = 0; |
| |
| range->num_bitrates = 1; |
| range->bitrate[0] = 1000000; /* 1 Mb/s */ |
| |
| range->encoding_size[0] = 2; /* 16 bits scrambling */ |
| range->num_encoding_sizes = 1; |
| range->max_encoding_tokens = 1; /* Only one key possible */ |
| |
| return ret; |
| } |
| |
| /* |
| * Wireless Private Handler : get snapshot |
| */ |
| static int netwave_get_snap(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| unsigned long flags; |
| unsigned int iobase = dev->base_addr; |
| netwave_private *priv = netdev_priv(dev); |
| u_char __iomem *ramBase = priv->ramBase; |
| |
| /* Disable interrupts & save flags */ |
| spin_lock_irqsave(&priv->spinlock, flags); |
| |
| /* Take snapshot of environment */ |
| netwave_snapshot( priv, ramBase, iobase); |
| wrqu->data.length = priv->nss.length; |
| memcpy(extra, (u_char *) &priv->nss, sizeof( struct site_survey)); |
| |
| priv->lastExec = jiffies; |
| |
| /* ReEnable interrupts & restore flags */ |
| spin_unlock_irqrestore(&priv->spinlock, flags); |
| |
| return(0); |
| } |
| |
| /* |
| * Structures to export the Wireless Handlers |
| * This is the stuff that are treated the wireless extensions (iwconfig) |
| */ |
| |
| static const struct iw_priv_args netwave_private_args[] = { |
| /*{ cmd, set_args, get_args, name } */ |
| { SIOCGIPSNAP, 0, |
| IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof(struct site_survey), |
| "getsitesurvey" }, |
| }; |
| |
| static const iw_handler netwave_handler[] = |
| { |
| NULL, /* SIOCSIWNAME */ |
| netwave_get_name, /* SIOCGIWNAME */ |
| netwave_set_nwid, /* SIOCSIWNWID */ |
| netwave_get_nwid, /* SIOCGIWNWID */ |
| NULL, /* SIOCSIWFREQ */ |
| NULL, /* SIOCGIWFREQ */ |
| NULL, /* SIOCSIWMODE */ |
| netwave_get_mode, /* SIOCGIWMODE */ |
| NULL, /* SIOCSIWSENS */ |
| NULL, /* SIOCGIWSENS */ |
| NULL, /* SIOCSIWRANGE */ |
| netwave_get_range, /* SIOCGIWRANGE */ |
| NULL, /* SIOCSIWPRIV */ |
| NULL, /* SIOCGIWPRIV */ |
| NULL, /* SIOCSIWSTATS */ |
| NULL, /* SIOCGIWSTATS */ |
| NULL, /* SIOCSIWSPY */ |
| NULL, /* SIOCGIWSPY */ |
| NULL, /* -- hole -- */ |
| NULL, /* -- hole -- */ |
| NULL, /* SIOCSIWAP */ |
| NULL, /* SIOCGIWAP */ |
| NULL, /* -- hole -- */ |
| NULL, /* SIOCGIWAPLIST */ |
| NULL, /* -- hole -- */ |
| NULL, /* -- hole -- */ |
| NULL, /* SIOCSIWESSID */ |
| NULL, /* SIOCGIWESSID */ |
| NULL, /* SIOCSIWNICKN */ |
| NULL, /* SIOCGIWNICKN */ |
| NULL, /* -- hole -- */ |
| NULL, /* -- hole -- */ |
| NULL, /* SIOCSIWRATE */ |
| NULL, /* SIOCGIWRATE */ |
| NULL, /* SIOCSIWRTS */ |
| NULL, /* SIOCGIWRTS */ |
| NULL, /* SIOCSIWFRAG */ |
| NULL, /* SIOCGIWFRAG */ |
| NULL, /* SIOCSIWTXPOW */ |
| NULL, /* SIOCGIWTXPOW */ |
| NULL, /* SIOCSIWRETRY */ |
| NULL, /* SIOCGIWRETRY */ |
| netwave_set_scramble, /* SIOCSIWENCODE */ |
| netwave_get_scramble, /* SIOCGIWENCODE */ |
| }; |
| |
| static const iw_handler netwave_private_handler[] = |
| { |
| NULL, /* SIOCIWFIRSTPRIV */ |
| netwave_get_snap, /* SIOCIWFIRSTPRIV + 1 */ |
| }; |
| |
| static const struct iw_handler_def netwave_handler_def = |
| { |
| .num_standard = ARRAY_SIZE(netwave_handler), |
| .num_private = ARRAY_SIZE(netwave_private_handler), |
| .num_private_args = ARRAY_SIZE(netwave_private_args), |
| .standard = (iw_handler *) netwave_handler, |
| .private = (iw_handler *) netwave_private_handler, |
| .private_args = (struct iw_priv_args *) netwave_private_args, |
| .get_wireless_stats = netwave_get_wireless_stats, |
| }; |
| |
| /* |
| * Function netwave_pcmcia_config (link) |
| * |
| * netwave_pcmcia_config() is scheduled to run after a CARD_INSERTION |
| * event is received, to configure the PCMCIA socket, and to make the |
| * device available to the system. |
| * |
| */ |
| |
| #define CS_CHECK(fn, ret) \ |
| do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) |
| |
| static int netwave_pcmcia_config(struct pcmcia_device *link) { |
| struct net_device *dev = link->priv; |
| netwave_private *priv = netdev_priv(dev); |
| int i, j, last_ret, last_fn; |
| win_req_t req; |
| memreq_t mem; |
| u_char __iomem *ramBase = NULL; |
| |
| DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link); |
| |
| /* |
| * Try allocating IO ports. This tries a few fixed addresses. |
| * If you want, you can also read the card's config table to |
| * pick addresses -- see the serial driver for an example. |
| */ |
| for (i = j = 0x0; j < 0x400; j += 0x20) { |
| link->io.BasePort1 = j ^ 0x300; |
| i = pcmcia_request_io(link, &link->io); |
| if (i == 0) |
| break; |
| } |
| if (i != 0) { |
| cs_error(link, RequestIO, i); |
| goto failed; |
| } |
| |
| /* |
| * Now allocate an interrupt line. Note that this does not |
| * actually assign a handler to the interrupt. |
| */ |
| CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); |
| |
| /* |
| * This actually configures the PCMCIA socket -- setting up |
| * the I/O windows and the interrupt mapping. |
| */ |
| CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); |
| |
| /* |
| * Allocate a 32K memory window. Note that the struct pcmcia_device |
| * structure provides space for one window handle -- if your |
| * device needs several windows, you'll need to keep track of |
| * the handles in your private data structure, dev->priv. |
| */ |
| DEBUG(1, "Setting mem speed of %d\n", mem_speed); |
| |
| req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE; |
| req.Base = 0; req.Size = 0x8000; |
| req.AccessSpeed = mem_speed; |
| CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win)); |
| mem.CardOffset = 0x20000; mem.Page = 0; |
| CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem)); |
| |
| /* Store base address of the common window frame */ |
| ramBase = ioremap(req.Base, 0x8000); |
| priv->ramBase = ramBase; |
| |
| dev->irq = link->irq.AssignedIRQ; |
| dev->base_addr = link->io.BasePort1; |
| SET_NETDEV_DEV(dev, &handle_to_dev(link)); |
| |
| if (register_netdev(dev) != 0) { |
| printk(KERN_DEBUG "netwave_cs: register_netdev() failed\n"); |
| goto failed; |
| } |
| |
| strcpy(priv->node.dev_name, dev->name); |
| link->dev_node = &priv->node; |
| |
| /* Reset card before reading physical address */ |
| netwave_doreset(dev->base_addr, ramBase); |
| |
| /* Read the ethernet address and fill in the Netwave registers. */ |
| for (i = 0; i < 6; i++) |
| dev->dev_addr[i] = readb(ramBase + NETWAVE_EREG_PA + i); |
| |
| printk(KERN_INFO "%s: Netwave: port %#3lx, irq %d, mem %lx, " |
| "id %c%c, hw_addr %pM\n", |
| dev->name, dev->base_addr, dev->irq, |
| (u_long) ramBase, |
| (int) readb(ramBase+NETWAVE_EREG_NI), |
| (int) readb(ramBase+NETWAVE_EREG_NI+1), |
| dev->dev_addr); |
| |
| /* get revision words */ |
| printk(KERN_DEBUG "Netwave_reset: revision %04x %04x\n", |
| get_uint16(ramBase + NETWAVE_EREG_ARW), |
| get_uint16(ramBase + NETWAVE_EREG_ARW+2)); |
| return 0; |
| |
| cs_failed: |
| cs_error(link, last_fn, last_ret); |
| failed: |
| netwave_release(link); |
| return -ENODEV; |
| } /* netwave_pcmcia_config */ |
| |
| /* |
| * Function netwave_release (arg) |
| * |
| * After a card is removed, netwave_release() will unregister the net |
| * device, and release the PCMCIA configuration. If the device is |
| * still open, this will be postponed until it is closed. |
| */ |
| static void netwave_release(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| netwave_private *priv = netdev_priv(dev); |
| |
| DEBUG(0, "netwave_release(0x%p)\n", link); |
| |
| pcmcia_disable_device(link); |
| if (link->win) |
| iounmap(priv->ramBase); |
| } |
| |
| static int netwave_suspend(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| |
| if (link->open) |
| netif_device_detach(dev); |
| |
| return 0; |
| } |
| |
| static int netwave_resume(struct pcmcia_device *link) |
| { |
| struct net_device *dev = link->priv; |
| |
| if (link->open) { |
| netwave_reset(dev); |
| netif_device_attach(dev); |
| } |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Function netwave_doreset (ioBase, ramBase) |
| * |
| * Proper hardware reset of the card. |
| */ |
| static void netwave_doreset(unsigned int ioBase, u_char __iomem *ramBase) |
| { |
| /* Reset card */ |
| wait_WOC(ioBase); |
| outb(0x80, ioBase + NETWAVE_REG_PMR); |
| writeb(0x08, ramBase + NETWAVE_EREG_ASCC); /* Bit 3 is WOC */ |
| outb(0x0, ioBase + NETWAVE_REG_PMR); /* release reset */ |
| } |
| |
| /* |
| * Function netwave_reset (dev) |
| * |
| * Reset and restore all of the netwave registers |
| */ |
| static void netwave_reset(struct net_device *dev) { |
| /* u_char state; */ |
| netwave_private *priv = netdev_priv(dev); |
| u_char __iomem *ramBase = priv->ramBase; |
| unsigned int iobase = dev->base_addr; |
| |
| DEBUG(0, "netwave_reset: Done with hardware reset\n"); |
| |
| priv->timeoutCounter = 0; |
| |
| /* Reset card */ |
| netwave_doreset(iobase, ramBase); |
| printk(KERN_DEBUG "netwave_reset: Done with hardware reset\n"); |
| |
| /* Write a NOP to check the card */ |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_NOP, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); |
| |
| /* Set receive conf */ |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(rxConfRxEna + rxConfBcast, ramBase + NETWAVE_EREG_CB + 1); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2); |
| |
| /* Set transmit conf */ |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_STC, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(txConfTxEna, ramBase + NETWAVE_EREG_CB + 1); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2); |
| |
| /* Now set the MU Domain */ |
| printk(KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff); |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(domain & 0xff, ramBase + NETWAVE_EREG_CB + 1); |
| writeb((domain>>8) & 0x01, ramBase + NETWAVE_EREG_CB + 2); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); |
| |
| /* Set scramble key */ |
| printk(KERN_DEBUG "Setting scramble key to 0x%x\n", scramble_key); |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1); |
| writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); |
| |
| /* Enable interrupts, bit 4 high to keep unused |
| * source from interrupting us, bit 2 high to |
| * set interrupt enable, 567 to enable TxDN, |
| * RxErr and RxRdy |
| */ |
| wait_WOC(iobase); |
| outb(imrConfIENA+imrConfRFU1, iobase + NETWAVE_REG_IMR); |
| |
| /* Hent 4 bytes fra 0x170. Skal vaere 0a,29,88,36 |
| * waitWOC |
| * skriv 80 til d000:3688 |
| * sjekk om det ble 80 |
| */ |
| |
| /* Enable Receiver */ |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_ER, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); |
| |
| /* Set the IENA bit in COR */ |
| wait_WOC(iobase); |
| outb(corConfIENA + corConfLVLREQ, iobase + NETWAVE_REG_COR); |
| } |
| |
| /* |
| * Function netwave_hw_xmit (data, len, dev) |
| */ |
| static int netwave_hw_xmit(unsigned char* data, int len, |
| struct net_device* dev) { |
| unsigned long flags; |
| unsigned int TxFreeList, |
| curBuff, |
| MaxData, |
| DataOffset; |
| int tmpcount; |
| |
| netwave_private *priv = netdev_priv(dev); |
| u_char __iomem * ramBase = priv->ramBase; |
| unsigned int iobase = dev->base_addr; |
| |
| /* Disable interrupts & save flags */ |
| spin_lock_irqsave(&priv->spinlock, flags); |
| |
| /* Check if there are transmit buffers available */ |
| wait_WOC(iobase); |
| if ((inb(iobase+NETWAVE_REG_ASR) & NETWAVE_ASR_TXBA) == 0) { |
| /* No buffers available */ |
| printk(KERN_DEBUG "netwave_hw_xmit: %s - no xmit buffers available.\n", |
| dev->name); |
| spin_unlock_irqrestore(&priv->spinlock, flags); |
| return 1; |
| } |
| |
| priv->stats.tx_bytes += len; |
| |
| DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n", |
| readb(ramBase + NETWAVE_EREG_SPCQ), |
| readb(ramBase + NETWAVE_EREG_SPU), |
| readb(ramBase + NETWAVE_EREG_LIF), |
| readb(ramBase + NETWAVE_EREG_ISPLQ)); |
| |
| /* Now try to insert it into the adapters free memory */ |
| wait_WOC(iobase); |
| TxFreeList = get_uint16(ramBase + NETWAVE_EREG_TDP); |
| MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2); |
| DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4); |
| |
| DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n", |
| TxFreeList, MaxData, DataOffset); |
| |
| /* Copy packet to the adapter fragment buffers */ |
| curBuff = TxFreeList; |
| tmpcount = 0; |
| while (tmpcount < len) { |
| int tmplen = len - tmpcount; |
| copy_to_pc(ramBase + curBuff + DataOffset, data + tmpcount, |
| (tmplen < MaxData) ? tmplen : MaxData); |
| tmpcount += MaxData; |
| |
| /* Advance to next buffer */ |
| curBuff = get_uint16(ramBase + curBuff); |
| } |
| |
| /* Now issue transmit list */ |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_TL, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(len & 0xff, ramBase + NETWAVE_EREG_CB + 1); |
| writeb((len>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3); |
| |
| spin_unlock_irqrestore(&priv->spinlock, flags); |
| return 0; |
| } |
| |
| static int netwave_start_xmit(struct sk_buff *skb, struct net_device *dev) { |
| /* This flag indicate that the hardware can't perform a transmission. |
| * Theoritically, NET3 check it before sending a packet to the driver, |
| * but in fact it never do that and pool continuously. |
| * As the watchdog will abort too long transmissions, we are quite safe... |
| */ |
| |
| netif_stop_queue(dev); |
| |
| { |
| short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; |
| unsigned char* buf = skb->data; |
| |
| if (netwave_hw_xmit( buf, length, dev) == 1) { |
| /* Some error, let's make them call us another time? */ |
| netif_start_queue(dev); |
| } |
| dev->trans_start = jiffies; |
| } |
| dev_kfree_skb(skb); |
| |
| return 0; |
| } /* netwave_start_xmit */ |
| |
| /* |
| * Function netwave_interrupt (irq, dev_id) |
| * |
| * This function is the interrupt handler for the Netwave card. This |
| * routine will be called whenever: |
| * 1. A packet is received. |
| * 2. A packet has successfully been transferred and the unit is |
| * ready to transmit another packet. |
| * 3. A command has completed execution. |
| */ |
| static irqreturn_t netwave_interrupt(int irq, void* dev_id) |
| { |
| unsigned int iobase; |
| u_char __iomem *ramBase; |
| struct net_device *dev = (struct net_device *)dev_id; |
| struct netwave_private *priv = netdev_priv(dev); |
| struct pcmcia_device *link = priv->p_dev; |
| int i; |
| |
| if (!netif_device_present(dev)) |
| return IRQ_NONE; |
| |
| iobase = dev->base_addr; |
| ramBase = priv->ramBase; |
| |
| /* Now find what caused the interrupt, check while interrupts ready */ |
| for (i = 0; i < 10; i++) { |
| u_char status; |
| |
| wait_WOC(iobase); |
| if (!(inb(iobase+NETWAVE_REG_CCSR) & 0x02)) |
| break; /* None of the interrupt sources asserted (normal exit) */ |
| |
| status = inb(iobase + NETWAVE_REG_ASR); |
| |
| if (!pcmcia_dev_present(link)) { |
| DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x " |
| "from removed or suspended card!\n", status); |
| break; |
| } |
| |
| /* RxRdy */ |
| if (status & 0x80) { |
| netwave_rx(dev); |
| /* wait_WOC(iobase); */ |
| /* RxRdy cannot be reset directly by the host */ |
| } |
| /* RxErr */ |
| if (status & 0x40) { |
| u_char rser; |
| |
| rser = readb(ramBase + NETWAVE_EREG_RSER); |
| |
| if (rser & 0x04) { |
| ++priv->stats.rx_dropped; |
| ++priv->stats.rx_crc_errors; |
| } |
| if (rser & 0x02) |
| ++priv->stats.rx_frame_errors; |
| |
| /* Clear the RxErr bit in RSER. RSER+4 is the |
| * write part. Also clear the RxCRC (0x04) and |
| * RxBig (0x02) bits if present */ |
| wait_WOC(iobase); |
| writeb(0x40 | (rser & 0x06), ramBase + NETWAVE_EREG_RSER + 4); |
| |
| /* Write bit 6 high to ASCC to clear RxErr in ASR, |
| * WOC must be set first! |
| */ |
| wait_WOC(iobase); |
| writeb(0x40, ramBase + NETWAVE_EREG_ASCC); |
| |
| /* Remember to count up priv->stats on error packets */ |
| ++priv->stats.rx_errors; |
| } |
| /* TxDN */ |
| if (status & 0x20) { |
| int txStatus; |
| |
| txStatus = readb(ramBase + NETWAVE_EREG_TSER); |
| DEBUG(3, "Transmit done. TSER = %x id %x\n", |
| txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1)); |
| |
| if (txStatus & 0x20) { |
| /* Transmitting was okay, clear bits */ |
| wait_WOC(iobase); |
| writeb(0x2f, ramBase + NETWAVE_EREG_TSER + 4); |
| ++priv->stats.tx_packets; |
| } |
| |
| if (txStatus & 0xd0) { |
| if (txStatus & 0x80) { |
| ++priv->stats.collisions; /* Because of /proc/net/dev*/ |
| /* ++priv->stats.tx_aborted_errors; */ |
| /* printk("Collision. %ld\n", jiffies - dev->trans_start); */ |
| } |
| if (txStatus & 0x40) |
| ++priv->stats.tx_carrier_errors; |
| /* 0x80 TxGU Transmit giveup - nine times and no luck |
| * 0x40 TxNOAP No access point. Discarded packet. |
| * 0x10 TxErr Transmit error. Always set when |
| * TxGU and TxNOAP is set. (Those are the only ones |
| * to set TxErr). |
| */ |
| DEBUG(3, "netwave_interrupt: TxDN with error status %x\n", |
| txStatus); |
| |
| /* Clear out TxGU, TxNOAP, TxErr and TxTrys */ |
| wait_WOC(iobase); |
| writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4); |
| ++priv->stats.tx_errors; |
| } |
| DEBUG(3, "New status is TSER %x ASR %x\n", |
| readb(ramBase + NETWAVE_EREG_TSER), |
| inb(iobase + NETWAVE_REG_ASR)); |
| |
| netif_wake_queue(dev); |
| } |
| /* TxBA, this would trigger on all error packets received */ |
| /* if (status & 0x01) { |
| DEBUG(4, "Transmit buffers available, %x\n", status); |
| } |
| */ |
| } |
| /* Handled if we looped at least one time - Jean II */ |
| return IRQ_RETVAL(i); |
| } /* netwave_interrupt */ |
| |
| /* |
| * Function netwave_watchdog (a) |
| * |
| * Watchdog : when we start a transmission, we set a timer in the |
| * kernel. If the transmission complete, this timer is disabled. If |
| * it expire, we reset the card. |
| * |
| */ |
| static void netwave_watchdog(struct net_device *dev) { |
| |
| DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name); |
| netwave_reset(dev); |
| dev->trans_start = jiffies; |
| netif_wake_queue(dev); |
| } /* netwave_watchdog */ |
| |
| static struct net_device_stats *netwave_get_stats(struct net_device *dev) { |
| netwave_private *priv = netdev_priv(dev); |
| |
| update_stats(dev); |
| |
| DEBUG(2, "netwave: SPCQ %x SPU %x LIF %x ISPLQ %x MHS %x rxtx %x" |
| " %x tx %x %x %x %x\n", |
| readb(priv->ramBase + NETWAVE_EREG_SPCQ), |
| readb(priv->ramBase + NETWAVE_EREG_SPU), |
| readb(priv->ramBase + NETWAVE_EREG_LIF), |
| readb(priv->ramBase + NETWAVE_EREG_ISPLQ), |
| readb(priv->ramBase + NETWAVE_EREG_MHS), |
| readb(priv->ramBase + NETWAVE_EREG_EC + 0xe), |
| readb(priv->ramBase + NETWAVE_EREG_EC + 0xf), |
| readb(priv->ramBase + NETWAVE_EREG_EC + 0x18), |
| readb(priv->ramBase + NETWAVE_EREG_EC + 0x19), |
| readb(priv->ramBase + NETWAVE_EREG_EC + 0x1a), |
| readb(priv->ramBase + NETWAVE_EREG_EC + 0x1b)); |
| |
| return &priv->stats; |
| } |
| |
| static void update_stats(struct net_device *dev) { |
| //unsigned long flags; |
| /* netwave_private *priv = netdev_priv(dev); */ |
| |
| //spin_lock_irqsave(&priv->spinlock, flags); |
| |
| /* priv->stats.rx_packets = readb(priv->ramBase + 0x18e); |
| priv->stats.tx_packets = readb(priv->ramBase + 0x18f); */ |
| |
| //spin_unlock_irqrestore(&priv->spinlock, flags); |
| } |
| |
| static int netwave_rx(struct net_device *dev) |
| { |
| netwave_private *priv = netdev_priv(dev); |
| u_char __iomem *ramBase = priv->ramBase; |
| unsigned int iobase = dev->base_addr; |
| u_char rxStatus; |
| struct sk_buff *skb = NULL; |
| unsigned int curBuffer, |
| rcvList; |
| int rcvLen; |
| int tmpcount = 0; |
| int dataCount, dataOffset; |
| int i; |
| u_char *ptr; |
| |
| DEBUG(3, "xinw_rx: Receiving ... \n"); |
| |
| /* Receive max 10 packets for now. */ |
| for (i = 0; i < 10; i++) { |
| /* Any packets? */ |
| wait_WOC(iobase); |
| rxStatus = readb(ramBase + NETWAVE_EREG_RSER); |
| if ( !( rxStatus & 0x80)) /* No more packets */ |
| break; |
| |
| /* Check if multicast/broadcast or other */ |
| /* multicast = (rxStatus & 0x20); */ |
| |
| /* The receive list pointer and length of the packet */ |
| wait_WOC(iobase); |
| rcvLen = get_int16( ramBase + NETWAVE_EREG_RDP); |
| rcvList = get_uint16( ramBase + NETWAVE_EREG_RDP + 2); |
| |
| if (rcvLen < 0) { |
| printk(KERN_DEBUG "netwave_rx: Receive packet with len %d\n", |
| rcvLen); |
| return 0; |
| } |
| |
| skb = dev_alloc_skb(rcvLen+5); |
| if (skb == NULL) { |
| DEBUG(1, "netwave_rx: Could not allocate an sk_buff of " |
| "length %d\n", rcvLen); |
| ++priv->stats.rx_dropped; |
| /* Tell the adapter to skip the packet */ |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); |
| return 0; |
| } |
| |
| skb_reserve( skb, 2); /* Align IP on 16 byte */ |
| skb_put( skb, rcvLen); |
| |
| /* Copy packet fragments to the skb data area */ |
| ptr = (u_char*) skb->data; |
| curBuffer = rcvList; |
| tmpcount = 0; |
| while ( tmpcount < rcvLen) { |
| /* Get length and offset of current buffer */ |
| dataCount = get_uint16( ramBase+curBuffer+2); |
| dataOffset = get_uint16( ramBase+curBuffer+4); |
| |
| copy_from_pc( ptr + tmpcount, |
| ramBase+curBuffer+dataOffset, dataCount); |
| |
| tmpcount += dataCount; |
| |
| /* Point to next buffer */ |
| curBuffer = get_uint16(ramBase + curBuffer); |
| } |
| |
| skb->protocol = eth_type_trans(skb,dev); |
| /* Queue packet for network layer */ |
| netif_rx(skb); |
| |
| priv->stats.rx_packets++; |
| priv->stats.rx_bytes += rcvLen; |
| |
| /* Got the packet, tell the adapter to skip it */ |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); |
| DEBUG(3, "Packet reception ok\n"); |
| } |
| return 0; |
| } |
| |
| static int netwave_open(struct net_device *dev) { |
| netwave_private *priv = netdev_priv(dev); |
| struct pcmcia_device *link = priv->p_dev; |
| |
| DEBUG(1, "netwave_open: starting.\n"); |
| |
| if (!pcmcia_dev_present(link)) |
| return -ENODEV; |
| |
| link->open++; |
| |
| netif_start_queue(dev); |
| netwave_reset(dev); |
| |
| return 0; |
| } |
| |
| static int netwave_close(struct net_device *dev) { |
| netwave_private *priv = netdev_priv(dev); |
| struct pcmcia_device *link = priv->p_dev; |
| |
| DEBUG(1, "netwave_close: finishing.\n"); |
| |
| link->open--; |
| netif_stop_queue(dev); |
| |
| return 0; |
| } |
| |
| static struct pcmcia_device_id netwave_ids[] = { |
| PCMCIA_DEVICE_PROD_ID12("Xircom", "CreditCard Netwave", 0x2e3ee845, 0x54e28a28), |
| PCMCIA_DEVICE_NULL, |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, netwave_ids); |
| |
| static struct pcmcia_driver netwave_driver = { |
| .owner = THIS_MODULE, |
| .drv = { |
| .name = "netwave_cs", |
| }, |
| .probe = netwave_probe, |
| .remove = netwave_detach, |
| .id_table = netwave_ids, |
| .suspend = netwave_suspend, |
| .resume = netwave_resume, |
| }; |
| |
| static int __init init_netwave_cs(void) |
| { |
| return pcmcia_register_driver(&netwave_driver); |
| } |
| |
| static void __exit exit_netwave_cs(void) |
| { |
| pcmcia_unregister_driver(&netwave_driver); |
| } |
| |
| module_init(init_netwave_cs); |
| module_exit(exit_netwave_cs); |
| |
| /* Set or clear the multicast filter for this adaptor. |
| num_addrs == -1 Promiscuous mode, receive all packets |
| num_addrs == 0 Normal mode, clear multicast list |
| num_addrs > 0 Multicast mode, receive normal and MC packets, and do |
| best-effort filtering. |
| */ |
| static void set_multicast_list(struct net_device *dev) |
| { |
| unsigned int iobase = dev->base_addr; |
| netwave_private *priv = netdev_priv(dev); |
| u_char __iomem * ramBase = priv->ramBase; |
| u_char rcvMode = 0; |
| |
| #ifdef PCMCIA_DEBUG |
| if (pc_debug > 2) { |
| static int old; |
| if (old != dev->mc_count) { |
| old = dev->mc_count; |
| DEBUG(0, "%s: setting Rx mode to %d addresses.\n", |
| dev->name, dev->mc_count); |
| } |
| } |
| #endif |
| |
| if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) { |
| /* Multicast Mode */ |
| rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast; |
| } else if (dev->flags & IFF_PROMISC) { |
| /* Promiscous mode */ |
| rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast; |
| } else { |
| /* Normal mode */ |
| rcvMode = rxConfRxEna + rxConfBcast; |
| } |
| |
| /* printk("netwave set_multicast_list: rcvMode to %x\n", rcvMode);*/ |
| /* Now set receive mode */ |
| wait_WOC(iobase); |
| writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0); |
| writeb(rcvMode, ramBase + NETWAVE_EREG_CB + 1); |
| writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2); |
| } |
| MODULE_LICENSE("GPL"); |