| /* exynos_drm_fimd.c |
| * |
| * Copyright (C) 2011 Samsung Electronics Co.Ltd |
| * Authors: |
| * Joonyoung Shim <jy0922.shim@samsung.com> |
| * Inki Dae <inki.dae@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| #include <drm/drmP.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/component.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regmap.h> |
| |
| #include <video/of_display_timing.h> |
| #include <video/of_videomode.h> |
| #include <video/samsung_fimd.h> |
| #include <drm/exynos_drm.h> |
| |
| #include "exynos_drm_drv.h" |
| #include "exynos_drm_fb.h" |
| #include "exynos_drm_fbdev.h" |
| #include "exynos_drm_crtc.h" |
| #include "exynos_drm_plane.h" |
| #include "exynos_drm_iommu.h" |
| |
| /* |
| * FIMD stands for Fully Interactive Mobile Display and |
| * as a display controller, it transfers contents drawn on memory |
| * to a LCD Panel through Display Interfaces such as RGB or |
| * CPU Interface. |
| */ |
| |
| #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 |
| |
| /* position control register for hardware window 0, 2 ~ 4.*/ |
| #define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16) |
| #define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16) |
| /* |
| * size control register for hardware windows 0 and alpha control register |
| * for hardware windows 1 ~ 4 |
| */ |
| #define VIDOSD_C(win) (VIDOSD_BASE + 0x08 + (win) * 16) |
| /* size control register for hardware windows 1 ~ 2. */ |
| #define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16) |
| |
| #define VIDWnALPHA0(win) (VIDW_ALPHA + 0x00 + (win) * 8) |
| #define VIDWnALPHA1(win) (VIDW_ALPHA + 0x04 + (win) * 8) |
| |
| #define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8) |
| #define VIDWx_BUF_START_S(win, buf) (VIDW_BUF_START_S(buf) + (win) * 8) |
| #define VIDWx_BUF_END(win, buf) (VIDW_BUF_END(buf) + (win) * 8) |
| #define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4) |
| |
| /* color key control register for hardware window 1 ~ 4. */ |
| #define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + ((x - 1) * 8)) |
| /* color key value register for hardware window 1 ~ 4. */ |
| #define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8)) |
| |
| /* I80 / RGB trigger control register */ |
| #define TRIGCON 0x1A4 |
| #define TRGMODE_I80_RGB_ENABLE_I80 (1 << 0) |
| #define SWTRGCMD_I80_RGB_ENABLE (1 << 1) |
| |
| /* display mode change control register except exynos4 */ |
| #define VIDOUT_CON 0x000 |
| #define VIDOUT_CON_F_I80_LDI0 (0x2 << 8) |
| |
| /* I80 interface control for main LDI register */ |
| #define I80IFCONFAx(x) (0x1B0 + (x) * 4) |
| #define I80IFCONFBx(x) (0x1B8 + (x) * 4) |
| #define LCD_CS_SETUP(x) ((x) << 16) |
| #define LCD_WR_SETUP(x) ((x) << 12) |
| #define LCD_WR_ACTIVE(x) ((x) << 8) |
| #define LCD_WR_HOLD(x) ((x) << 4) |
| #define I80IFEN_ENABLE (1 << 0) |
| |
| /* FIMD has totally five hardware windows. */ |
| #define WINDOWS_NR 5 |
| |
| struct fimd_driver_data { |
| unsigned int timing_base; |
| unsigned int lcdblk_offset; |
| unsigned int lcdblk_vt_shift; |
| unsigned int lcdblk_bypass_shift; |
| |
| unsigned int has_shadowcon:1; |
| unsigned int has_clksel:1; |
| unsigned int has_limited_fmt:1; |
| unsigned int has_vidoutcon:1; |
| unsigned int has_vtsel:1; |
| }; |
| |
| static struct fimd_driver_data s3c64xx_fimd_driver_data = { |
| .timing_base = 0x0, |
| .has_clksel = 1, |
| .has_limited_fmt = 1, |
| }; |
| |
| static struct fimd_driver_data exynos3_fimd_driver_data = { |
| .timing_base = 0x20000, |
| .lcdblk_offset = 0x210, |
| .lcdblk_bypass_shift = 1, |
| .has_shadowcon = 1, |
| .has_vidoutcon = 1, |
| }; |
| |
| static struct fimd_driver_data exynos4_fimd_driver_data = { |
| .timing_base = 0x0, |
| .lcdblk_offset = 0x210, |
| .lcdblk_vt_shift = 10, |
| .lcdblk_bypass_shift = 1, |
| .has_shadowcon = 1, |
| .has_vtsel = 1, |
| }; |
| |
| static struct fimd_driver_data exynos4415_fimd_driver_data = { |
| .timing_base = 0x20000, |
| .lcdblk_offset = 0x210, |
| .lcdblk_vt_shift = 10, |
| .lcdblk_bypass_shift = 1, |
| .has_shadowcon = 1, |
| .has_vidoutcon = 1, |
| .has_vtsel = 1, |
| }; |
| |
| static struct fimd_driver_data exynos5_fimd_driver_data = { |
| .timing_base = 0x20000, |
| .lcdblk_offset = 0x214, |
| .lcdblk_vt_shift = 24, |
| .lcdblk_bypass_shift = 15, |
| .has_shadowcon = 1, |
| .has_vidoutcon = 1, |
| .has_vtsel = 1, |
| }; |
| |
| struct fimd_context { |
| struct device *dev; |
| struct drm_device *drm_dev; |
| struct exynos_drm_crtc *crtc; |
| struct exynos_drm_plane planes[WINDOWS_NR]; |
| struct exynos_drm_plane_config configs[WINDOWS_NR]; |
| struct clk *bus_clk; |
| struct clk *lcd_clk; |
| void __iomem *regs; |
| struct regmap *sysreg; |
| unsigned long irq_flags; |
| u32 vidcon0; |
| u32 vidcon1; |
| u32 vidout_con; |
| u32 i80ifcon; |
| bool i80_if; |
| bool suspended; |
| int pipe; |
| wait_queue_head_t wait_vsync_queue; |
| atomic_t wait_vsync_event; |
| atomic_t win_updated; |
| atomic_t triggering; |
| |
| struct exynos_drm_panel_info panel; |
| struct fimd_driver_data *driver_data; |
| struct drm_encoder *encoder; |
| }; |
| |
| static const struct of_device_id fimd_driver_dt_match[] = { |
| { .compatible = "samsung,s3c6400-fimd", |
| .data = &s3c64xx_fimd_driver_data }, |
| { .compatible = "samsung,exynos3250-fimd", |
| .data = &exynos3_fimd_driver_data }, |
| { .compatible = "samsung,exynos4210-fimd", |
| .data = &exynos4_fimd_driver_data }, |
| { .compatible = "samsung,exynos4415-fimd", |
| .data = &exynos4415_fimd_driver_data }, |
| { .compatible = "samsung,exynos5250-fimd", |
| .data = &exynos5_fimd_driver_data }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, fimd_driver_dt_match); |
| |
| static const enum drm_plane_type fimd_win_types[WINDOWS_NR] = { |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_OVERLAY, |
| DRM_PLANE_TYPE_OVERLAY, |
| DRM_PLANE_TYPE_OVERLAY, |
| DRM_PLANE_TYPE_CURSOR, |
| }; |
| |
| static const uint32_t fimd_formats[] = { |
| DRM_FORMAT_C8, |
| DRM_FORMAT_XRGB1555, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_ARGB8888, |
| }; |
| |
| static inline struct fimd_driver_data *drm_fimd_get_driver_data( |
| struct platform_device *pdev) |
| { |
| const struct of_device_id *of_id = |
| of_match_device(fimd_driver_dt_match, &pdev->dev); |
| |
| return (struct fimd_driver_data *)of_id->data; |
| } |
| |
| static int fimd_enable_vblank(struct exynos_drm_crtc *crtc) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| u32 val; |
| |
| if (ctx->suspended) |
| return -EPERM; |
| |
| if (!test_and_set_bit(0, &ctx->irq_flags)) { |
| val = readl(ctx->regs + VIDINTCON0); |
| |
| val |= VIDINTCON0_INT_ENABLE; |
| |
| if (ctx->i80_if) { |
| val |= VIDINTCON0_INT_I80IFDONE; |
| val |= VIDINTCON0_INT_SYSMAINCON; |
| val &= ~VIDINTCON0_INT_SYSSUBCON; |
| } else { |
| val |= VIDINTCON0_INT_FRAME; |
| |
| val &= ~VIDINTCON0_FRAMESEL0_MASK; |
| val |= VIDINTCON0_FRAMESEL0_VSYNC; |
| val &= ~VIDINTCON0_FRAMESEL1_MASK; |
| val |= VIDINTCON0_FRAMESEL1_NONE; |
| } |
| |
| writel(val, ctx->regs + VIDINTCON0); |
| } |
| |
| return 0; |
| } |
| |
| static void fimd_disable_vblank(struct exynos_drm_crtc *crtc) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| u32 val; |
| |
| if (ctx->suspended) |
| return; |
| |
| if (test_and_clear_bit(0, &ctx->irq_flags)) { |
| val = readl(ctx->regs + VIDINTCON0); |
| |
| val &= ~VIDINTCON0_INT_ENABLE; |
| |
| if (ctx->i80_if) { |
| val &= ~VIDINTCON0_INT_I80IFDONE; |
| val &= ~VIDINTCON0_INT_SYSMAINCON; |
| val &= ~VIDINTCON0_INT_SYSSUBCON; |
| } else |
| val &= ~VIDINTCON0_INT_FRAME; |
| |
| writel(val, ctx->regs + VIDINTCON0); |
| } |
| } |
| |
| static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| |
| if (ctx->suspended) |
| return; |
| |
| atomic_set(&ctx->wait_vsync_event, 1); |
| |
| /* |
| * wait for FIMD to signal VSYNC interrupt or return after |
| * timeout which is set to 50ms (refresh rate of 20). |
| */ |
| if (!wait_event_timeout(ctx->wait_vsync_queue, |
| !atomic_read(&ctx->wait_vsync_event), |
| HZ/20)) |
| DRM_DEBUG_KMS("vblank wait timed out.\n"); |
| } |
| |
| static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win, |
| bool enable) |
| { |
| u32 val = readl(ctx->regs + WINCON(win)); |
| |
| if (enable) |
| val |= WINCONx_ENWIN; |
| else |
| val &= ~WINCONx_ENWIN; |
| |
| writel(val, ctx->regs + WINCON(win)); |
| } |
| |
| static void fimd_enable_shadow_channel_path(struct fimd_context *ctx, |
| unsigned int win, |
| bool enable) |
| { |
| u32 val = readl(ctx->regs + SHADOWCON); |
| |
| if (enable) |
| val |= SHADOWCON_CHx_ENABLE(win); |
| else |
| val &= ~SHADOWCON_CHx_ENABLE(win); |
| |
| writel(val, ctx->regs + SHADOWCON); |
| } |
| |
| static void fimd_clear_channels(struct exynos_drm_crtc *crtc) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| unsigned int win, ch_enabled = 0; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| /* Hardware is in unknown state, so ensure it gets enabled properly */ |
| pm_runtime_get_sync(ctx->dev); |
| |
| clk_prepare_enable(ctx->bus_clk); |
| clk_prepare_enable(ctx->lcd_clk); |
| |
| /* Check if any channel is enabled. */ |
| for (win = 0; win < WINDOWS_NR; win++) { |
| u32 val = readl(ctx->regs + WINCON(win)); |
| |
| if (val & WINCONx_ENWIN) { |
| fimd_enable_video_output(ctx, win, false); |
| |
| if (ctx->driver_data->has_shadowcon) |
| fimd_enable_shadow_channel_path(ctx, win, |
| false); |
| |
| ch_enabled = 1; |
| } |
| } |
| |
| /* Wait for vsync, as disable channel takes effect at next vsync */ |
| if (ch_enabled) { |
| int pipe = ctx->pipe; |
| |
| /* ensure that vblank interrupt won't be reported to core */ |
| ctx->suspended = false; |
| ctx->pipe = -1; |
| |
| fimd_enable_vblank(ctx->crtc); |
| fimd_wait_for_vblank(ctx->crtc); |
| fimd_disable_vblank(ctx->crtc); |
| |
| ctx->suspended = true; |
| ctx->pipe = pipe; |
| } |
| |
| clk_disable_unprepare(ctx->lcd_clk); |
| clk_disable_unprepare(ctx->bus_clk); |
| |
| pm_runtime_put(ctx->dev); |
| } |
| |
| static u32 fimd_calc_clkdiv(struct fimd_context *ctx, |
| const struct drm_display_mode *mode) |
| { |
| unsigned long ideal_clk = mode->htotal * mode->vtotal * mode->vrefresh; |
| u32 clkdiv; |
| |
| if (ctx->i80_if) { |
| /* |
| * The frame done interrupt should be occurred prior to the |
| * next TE signal. |
| */ |
| ideal_clk *= 2; |
| } |
| |
| /* Find the clock divider value that gets us closest to ideal_clk */ |
| clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->lcd_clk), ideal_clk); |
| |
| return (clkdiv < 0x100) ? clkdiv : 0xff; |
| } |
| |
| static void fimd_commit(struct exynos_drm_crtc *crtc) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| struct drm_display_mode *mode = &crtc->base.state->adjusted_mode; |
| struct fimd_driver_data *driver_data = ctx->driver_data; |
| void *timing_base = ctx->regs + driver_data->timing_base; |
| u32 val, clkdiv; |
| |
| if (ctx->suspended) |
| return; |
| |
| /* nothing to do if we haven't set the mode yet */ |
| if (mode->htotal == 0 || mode->vtotal == 0) |
| return; |
| |
| if (ctx->i80_if) { |
| val = ctx->i80ifcon | I80IFEN_ENABLE; |
| writel(val, timing_base + I80IFCONFAx(0)); |
| |
| /* disable auto frame rate */ |
| writel(0, timing_base + I80IFCONFBx(0)); |
| |
| /* set video type selection to I80 interface */ |
| if (driver_data->has_vtsel && ctx->sysreg && |
| regmap_update_bits(ctx->sysreg, |
| driver_data->lcdblk_offset, |
| 0x3 << driver_data->lcdblk_vt_shift, |
| 0x1 << driver_data->lcdblk_vt_shift)) { |
| DRM_ERROR("Failed to update sysreg for I80 i/f.\n"); |
| return; |
| } |
| } else { |
| int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd; |
| u32 vidcon1; |
| |
| /* setup polarity values */ |
| vidcon1 = ctx->vidcon1; |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| vidcon1 |= VIDCON1_INV_VSYNC; |
| if (mode->flags & DRM_MODE_FLAG_NHSYNC) |
| vidcon1 |= VIDCON1_INV_HSYNC; |
| writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1); |
| |
| /* setup vertical timing values. */ |
| vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; |
| vbpd = mode->crtc_vtotal - mode->crtc_vsync_end; |
| vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay; |
| |
| val = VIDTCON0_VBPD(vbpd - 1) | |
| VIDTCON0_VFPD(vfpd - 1) | |
| VIDTCON0_VSPW(vsync_len - 1); |
| writel(val, ctx->regs + driver_data->timing_base + VIDTCON0); |
| |
| /* setup horizontal timing values. */ |
| hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; |
| hbpd = mode->crtc_htotal - mode->crtc_hsync_end; |
| hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay; |
| |
| val = VIDTCON1_HBPD(hbpd - 1) | |
| VIDTCON1_HFPD(hfpd - 1) | |
| VIDTCON1_HSPW(hsync_len - 1); |
| writel(val, ctx->regs + driver_data->timing_base + VIDTCON1); |
| } |
| |
| if (driver_data->has_vidoutcon) |
| writel(ctx->vidout_con, timing_base + VIDOUT_CON); |
| |
| /* set bypass selection */ |
| if (ctx->sysreg && regmap_update_bits(ctx->sysreg, |
| driver_data->lcdblk_offset, |
| 0x1 << driver_data->lcdblk_bypass_shift, |
| 0x1 << driver_data->lcdblk_bypass_shift)) { |
| DRM_ERROR("Failed to update sysreg for bypass setting.\n"); |
| return; |
| } |
| |
| /* setup horizontal and vertical display size. */ |
| val = VIDTCON2_LINEVAL(mode->vdisplay - 1) | |
| VIDTCON2_HOZVAL(mode->hdisplay - 1) | |
| VIDTCON2_LINEVAL_E(mode->vdisplay - 1) | |
| VIDTCON2_HOZVAL_E(mode->hdisplay - 1); |
| writel(val, ctx->regs + driver_data->timing_base + VIDTCON2); |
| |
| /* |
| * fields of register with prefix '_F' would be updated |
| * at vsync(same as dma start) |
| */ |
| val = ctx->vidcon0; |
| val |= VIDCON0_ENVID | VIDCON0_ENVID_F; |
| |
| if (ctx->driver_data->has_clksel) |
| val |= VIDCON0_CLKSEL_LCD; |
| |
| clkdiv = fimd_calc_clkdiv(ctx, mode); |
| if (clkdiv > 1) |
| val |= VIDCON0_CLKVAL_F(clkdiv - 1) | VIDCON0_CLKDIR; |
| |
| writel(val, ctx->regs + VIDCON0); |
| } |
| |
| |
| static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win, |
| uint32_t pixel_format, int width) |
| { |
| unsigned long val; |
| |
| val = WINCONx_ENWIN; |
| |
| /* |
| * In case of s3c64xx, window 0 doesn't support alpha channel. |
| * So the request format is ARGB8888 then change it to XRGB8888. |
| */ |
| if (ctx->driver_data->has_limited_fmt && !win) { |
| if (pixel_format == DRM_FORMAT_ARGB8888) |
| pixel_format = DRM_FORMAT_XRGB8888; |
| } |
| |
| switch (pixel_format) { |
| case DRM_FORMAT_C8: |
| val |= WINCON0_BPPMODE_8BPP_PALETTE; |
| val |= WINCONx_BURSTLEN_8WORD; |
| val |= WINCONx_BYTSWP; |
| break; |
| case DRM_FORMAT_XRGB1555: |
| val |= WINCON0_BPPMODE_16BPP_1555; |
| val |= WINCONx_HAWSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_RGB565: |
| val |= WINCON0_BPPMODE_16BPP_565; |
| val |= WINCONx_HAWSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| val |= WINCON0_BPPMODE_24BPP_888; |
| val |= WINCONx_WSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_ARGB8888: |
| val |= WINCON1_BPPMODE_25BPP_A1888 |
| | WINCON1_BLD_PIX | WINCON1_ALPHA_SEL; |
| val |= WINCONx_WSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| default: |
| DRM_DEBUG_KMS("invalid pixel size so using unpacked 24bpp.\n"); |
| |
| val |= WINCON0_BPPMODE_24BPP_888; |
| val |= WINCONx_WSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| } |
| |
| /* |
| * Setting dma-burst to 16Word causes permanent tearing for very small |
| * buffers, e.g. cursor buffer. Burst Mode switching which based on |
| * plane size is not recommended as plane size varies alot towards the |
| * end of the screen and rapid movement causes unstable DMA, but it is |
| * still better to change dma-burst than displaying garbage. |
| */ |
| |
| if (width < MIN_FB_WIDTH_FOR_16WORD_BURST) { |
| val &= ~WINCONx_BURSTLEN_MASK; |
| val |= WINCONx_BURSTLEN_4WORD; |
| } |
| |
| writel(val, ctx->regs + WINCON(win)); |
| |
| /* hardware window 0 doesn't support alpha channel. */ |
| if (win != 0) { |
| /* OSD alpha */ |
| val = VIDISD14C_ALPHA0_R(0xf) | |
| VIDISD14C_ALPHA0_G(0xf) | |
| VIDISD14C_ALPHA0_B(0xf) | |
| VIDISD14C_ALPHA1_R(0xf) | |
| VIDISD14C_ALPHA1_G(0xf) | |
| VIDISD14C_ALPHA1_B(0xf); |
| |
| writel(val, ctx->regs + VIDOSD_C(win)); |
| |
| val = VIDW_ALPHA_R(0xf) | VIDW_ALPHA_G(0xf) | |
| VIDW_ALPHA_G(0xf); |
| writel(val, ctx->regs + VIDWnALPHA0(win)); |
| writel(val, ctx->regs + VIDWnALPHA1(win)); |
| } |
| } |
| |
| static void fimd_win_set_colkey(struct fimd_context *ctx, unsigned int win) |
| { |
| unsigned int keycon0 = 0, keycon1 = 0; |
| |
| keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F | |
| WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0); |
| |
| keycon1 = WxKEYCON1_COLVAL(0xffffffff); |
| |
| writel(keycon0, ctx->regs + WKEYCON0_BASE(win)); |
| writel(keycon1, ctx->regs + WKEYCON1_BASE(win)); |
| } |
| |
| /** |
| * shadow_protect_win() - disable updating values from shadow registers at vsync |
| * |
| * @win: window to protect registers for |
| * @protect: 1 to protect (disable updates) |
| */ |
| static void fimd_shadow_protect_win(struct fimd_context *ctx, |
| unsigned int win, bool protect) |
| { |
| u32 reg, bits, val; |
| |
| /* |
| * SHADOWCON/PRTCON register is used for enabling timing. |
| * |
| * for example, once only width value of a register is set, |
| * if the dma is started then fimd hardware could malfunction so |
| * with protect window setting, the register fields with prefix '_F' |
| * wouldn't be updated at vsync also but updated once unprotect window |
| * is set. |
| */ |
| |
| if (ctx->driver_data->has_shadowcon) { |
| reg = SHADOWCON; |
| bits = SHADOWCON_WINx_PROTECT(win); |
| } else { |
| reg = PRTCON; |
| bits = PRTCON_PROTECT; |
| } |
| |
| val = readl(ctx->regs + reg); |
| if (protect) |
| val |= bits; |
| else |
| val &= ~bits; |
| writel(val, ctx->regs + reg); |
| } |
| |
| static void fimd_atomic_begin(struct exynos_drm_crtc *crtc) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| int i; |
| |
| if (ctx->suspended) |
| return; |
| |
| for (i = 0; i < WINDOWS_NR; i++) |
| fimd_shadow_protect_win(ctx, i, true); |
| } |
| |
| static void fimd_atomic_flush(struct exynos_drm_crtc *crtc) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| int i; |
| |
| if (ctx->suspended) |
| return; |
| |
| for (i = 0; i < WINDOWS_NR; i++) |
| fimd_shadow_protect_win(ctx, i, false); |
| } |
| |
| static void fimd_update_plane(struct exynos_drm_crtc *crtc, |
| struct exynos_drm_plane *plane) |
| { |
| struct exynos_drm_plane_state *state = |
| to_exynos_plane_state(plane->base.state); |
| struct fimd_context *ctx = crtc->ctx; |
| struct drm_framebuffer *fb = state->base.fb; |
| dma_addr_t dma_addr; |
| unsigned long val, size, offset; |
| unsigned int last_x, last_y, buf_offsize, line_size; |
| unsigned int win = plane->index; |
| unsigned int bpp = fb->bits_per_pixel >> 3; |
| unsigned int pitch = fb->pitches[0]; |
| |
| if (ctx->suspended) |
| return; |
| |
| offset = state->src.x * bpp; |
| offset += state->src.y * pitch; |
| |
| /* buffer start address */ |
| dma_addr = exynos_drm_fb_dma_addr(fb, 0) + offset; |
| val = (unsigned long)dma_addr; |
| writel(val, ctx->regs + VIDWx_BUF_START(win, 0)); |
| |
| /* buffer end address */ |
| size = pitch * state->crtc.h; |
| val = (unsigned long)(dma_addr + size); |
| writel(val, ctx->regs + VIDWx_BUF_END(win, 0)); |
| |
| DRM_DEBUG_KMS("start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n", |
| (unsigned long)dma_addr, val, size); |
| DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n", |
| state->crtc.w, state->crtc.h); |
| |
| /* buffer size */ |
| buf_offsize = pitch - (state->crtc.w * bpp); |
| line_size = state->crtc.w * bpp; |
| val = VIDW_BUF_SIZE_OFFSET(buf_offsize) | |
| VIDW_BUF_SIZE_PAGEWIDTH(line_size) | |
| VIDW_BUF_SIZE_OFFSET_E(buf_offsize) | |
| VIDW_BUF_SIZE_PAGEWIDTH_E(line_size); |
| writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0)); |
| |
| /* OSD position */ |
| val = VIDOSDxA_TOPLEFT_X(state->crtc.x) | |
| VIDOSDxA_TOPLEFT_Y(state->crtc.y) | |
| VIDOSDxA_TOPLEFT_X_E(state->crtc.x) | |
| VIDOSDxA_TOPLEFT_Y_E(state->crtc.y); |
| writel(val, ctx->regs + VIDOSD_A(win)); |
| |
| last_x = state->crtc.x + state->crtc.w; |
| if (last_x) |
| last_x--; |
| last_y = state->crtc.y + state->crtc.h; |
| if (last_y) |
| last_y--; |
| |
| val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y) | |
| VIDOSDxB_BOTRIGHT_X_E(last_x) | VIDOSDxB_BOTRIGHT_Y_E(last_y); |
| |
| writel(val, ctx->regs + VIDOSD_B(win)); |
| |
| DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n", |
| state->crtc.x, state->crtc.y, last_x, last_y); |
| |
| /* OSD size */ |
| if (win != 3 && win != 4) { |
| u32 offset = VIDOSD_D(win); |
| if (win == 0) |
| offset = VIDOSD_C(win); |
| val = state->crtc.w * state->crtc.h; |
| writel(val, ctx->regs + offset); |
| |
| DRM_DEBUG_KMS("osd size = 0x%x\n", (unsigned int)val); |
| } |
| |
| fimd_win_set_pixfmt(ctx, win, fb->pixel_format, state->src.w); |
| |
| /* hardware window 0 doesn't support color key. */ |
| if (win != 0) |
| fimd_win_set_colkey(ctx, win); |
| |
| fimd_enable_video_output(ctx, win, true); |
| |
| if (ctx->driver_data->has_shadowcon) |
| fimd_enable_shadow_channel_path(ctx, win, true); |
| |
| if (ctx->i80_if) |
| atomic_set(&ctx->win_updated, 1); |
| } |
| |
| static void fimd_disable_plane(struct exynos_drm_crtc *crtc, |
| struct exynos_drm_plane *plane) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| unsigned int win = plane->index; |
| |
| if (ctx->suspended) |
| return; |
| |
| fimd_enable_video_output(ctx, win, false); |
| |
| if (ctx->driver_data->has_shadowcon) |
| fimd_enable_shadow_channel_path(ctx, win, false); |
| } |
| |
| static void fimd_enable(struct exynos_drm_crtc *crtc) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| |
| if (!ctx->suspended) |
| return; |
| |
| ctx->suspended = false; |
| |
| pm_runtime_get_sync(ctx->dev); |
| |
| /* if vblank was enabled status, enable it again. */ |
| if (test_and_clear_bit(0, &ctx->irq_flags)) |
| fimd_enable_vblank(ctx->crtc); |
| |
| fimd_commit(ctx->crtc); |
| } |
| |
| static void fimd_disable(struct exynos_drm_crtc *crtc) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| int i; |
| |
| if (ctx->suspended) |
| return; |
| |
| /* |
| * We need to make sure that all windows are disabled before we |
| * suspend that connector. Otherwise we might try to scan from |
| * a destroyed buffer later. |
| */ |
| for (i = 0; i < WINDOWS_NR; i++) |
| fimd_disable_plane(crtc, &ctx->planes[i]); |
| |
| fimd_enable_vblank(crtc); |
| fimd_wait_for_vblank(crtc); |
| fimd_disable_vblank(crtc); |
| |
| writel(0, ctx->regs + VIDCON0); |
| |
| pm_runtime_put_sync(ctx->dev); |
| ctx->suspended = true; |
| } |
| |
| static void fimd_trigger(struct device *dev) |
| { |
| struct fimd_context *ctx = dev_get_drvdata(dev); |
| struct fimd_driver_data *driver_data = ctx->driver_data; |
| void *timing_base = ctx->regs + driver_data->timing_base; |
| u32 reg; |
| |
| /* |
| * Skips triggering if in triggering state, because multiple triggering |
| * requests can cause panel reset. |
| */ |
| if (atomic_read(&ctx->triggering)) |
| return; |
| |
| /* Enters triggering mode */ |
| atomic_set(&ctx->triggering, 1); |
| |
| reg = readl(timing_base + TRIGCON); |
| reg |= (TRGMODE_I80_RGB_ENABLE_I80 | SWTRGCMD_I80_RGB_ENABLE); |
| writel(reg, timing_base + TRIGCON); |
| |
| /* |
| * Exits triggering mode if vblank is not enabled yet, because when the |
| * VIDINTCON0 register is not set, it can not exit from triggering mode. |
| */ |
| if (!test_bit(0, &ctx->irq_flags)) |
| atomic_set(&ctx->triggering, 0); |
| } |
| |
| static void fimd_te_handler(struct exynos_drm_crtc *crtc) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| |
| /* Checks the crtc is detached already from encoder */ |
| if (ctx->pipe < 0 || !ctx->drm_dev) |
| return; |
| |
| /* |
| * If there is a page flip request, triggers and handles the page flip |
| * event so that current fb can be updated into panel GRAM. |
| */ |
| if (atomic_add_unless(&ctx->win_updated, -1, 0)) |
| fimd_trigger(ctx->dev); |
| |
| /* Wakes up vsync event queue */ |
| if (atomic_read(&ctx->wait_vsync_event)) { |
| atomic_set(&ctx->wait_vsync_event, 0); |
| wake_up(&ctx->wait_vsync_queue); |
| } |
| |
| if (test_bit(0, &ctx->irq_flags)) |
| drm_crtc_handle_vblank(&ctx->crtc->base); |
| } |
| |
| static void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable) |
| { |
| struct fimd_context *ctx = crtc->ctx; |
| u32 val; |
| |
| /* |
| * Only Exynos 5250, 5260, 5410 and 542x requires enabling DP/MIE |
| * clock. On these SoCs the bootloader may enable it but any |
| * power domain off/on will reset it to disable state. |
| */ |
| if (ctx->driver_data != &exynos5_fimd_driver_data) |
| return; |
| |
| val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE; |
| writel(val, ctx->regs + DP_MIE_CLKCON); |
| } |
| |
| static const struct exynos_drm_crtc_ops fimd_crtc_ops = { |
| .enable = fimd_enable, |
| .disable = fimd_disable, |
| .commit = fimd_commit, |
| .enable_vblank = fimd_enable_vblank, |
| .disable_vblank = fimd_disable_vblank, |
| .wait_for_vblank = fimd_wait_for_vblank, |
| .atomic_begin = fimd_atomic_begin, |
| .update_plane = fimd_update_plane, |
| .disable_plane = fimd_disable_plane, |
| .atomic_flush = fimd_atomic_flush, |
| .te_handler = fimd_te_handler, |
| .clock_enable = fimd_dp_clock_enable, |
| }; |
| |
| static irqreturn_t fimd_irq_handler(int irq, void *dev_id) |
| { |
| struct fimd_context *ctx = (struct fimd_context *)dev_id; |
| u32 val, clear_bit, start, start_s; |
| int win; |
| |
| val = readl(ctx->regs + VIDINTCON1); |
| |
| clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME; |
| if (val & clear_bit) |
| writel(clear_bit, ctx->regs + VIDINTCON1); |
| |
| /* check the crtc is detached already from encoder */ |
| if (ctx->pipe < 0 || !ctx->drm_dev) |
| goto out; |
| |
| if (!ctx->i80_if) |
| drm_crtc_handle_vblank(&ctx->crtc->base); |
| |
| for (win = 0 ; win < WINDOWS_NR ; win++) { |
| struct exynos_drm_plane *plane = &ctx->planes[win]; |
| |
| if (!plane->pending_fb) |
| continue; |
| |
| start = readl(ctx->regs + VIDWx_BUF_START(win, 0)); |
| start_s = readl(ctx->regs + VIDWx_BUF_START_S(win, 0)); |
| if (start == start_s) |
| exynos_drm_crtc_finish_update(ctx->crtc, plane); |
| } |
| |
| if (ctx->i80_if) { |
| /* Exits triggering mode */ |
| atomic_set(&ctx->triggering, 0); |
| } else { |
| /* set wait vsync event to zero and wake up queue. */ |
| if (atomic_read(&ctx->wait_vsync_event)) { |
| atomic_set(&ctx->wait_vsync_event, 0); |
| wake_up(&ctx->wait_vsync_queue); |
| } |
| } |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static int fimd_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct fimd_context *ctx = dev_get_drvdata(dev); |
| struct drm_device *drm_dev = data; |
| struct exynos_drm_private *priv = drm_dev->dev_private; |
| struct exynos_drm_plane *exynos_plane; |
| unsigned int i; |
| int ret; |
| |
| ctx->drm_dev = drm_dev; |
| ctx->pipe = priv->pipe++; |
| |
| for (i = 0; i < WINDOWS_NR; i++) { |
| ctx->configs[i].pixel_formats = fimd_formats; |
| ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_formats); |
| ctx->configs[i].zpos = i; |
| ctx->configs[i].type = fimd_win_types[i]; |
| ret = exynos_plane_init(drm_dev, &ctx->planes[i], i, |
| 1 << ctx->pipe, &ctx->configs[i]); |
| if (ret) |
| return ret; |
| } |
| |
| exynos_plane = &ctx->planes[DEFAULT_WIN]; |
| ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base, |
| ctx->pipe, EXYNOS_DISPLAY_TYPE_LCD, |
| &fimd_crtc_ops, ctx); |
| if (IS_ERR(ctx->crtc)) |
| return PTR_ERR(ctx->crtc); |
| |
| if (ctx->encoder) |
| exynos_dpi_bind(drm_dev, ctx->encoder); |
| |
| if (is_drm_iommu_supported(drm_dev)) |
| fimd_clear_channels(ctx->crtc); |
| |
| ret = drm_iommu_attach_device(drm_dev, dev); |
| if (ret) |
| priv->pipe--; |
| |
| return ret; |
| } |
| |
| static void fimd_unbind(struct device *dev, struct device *master, |
| void *data) |
| { |
| struct fimd_context *ctx = dev_get_drvdata(dev); |
| |
| fimd_disable(ctx->crtc); |
| |
| drm_iommu_detach_device(ctx->drm_dev, ctx->dev); |
| |
| if (ctx->encoder) |
| exynos_dpi_remove(ctx->encoder); |
| } |
| |
| static const struct component_ops fimd_component_ops = { |
| .bind = fimd_bind, |
| .unbind = fimd_unbind, |
| }; |
| |
| static int fimd_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct fimd_context *ctx; |
| struct device_node *i80_if_timings; |
| struct resource *res; |
| int ret; |
| |
| if (!dev->of_node) |
| return -ENODEV; |
| |
| ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| ctx->dev = dev; |
| ctx->suspended = true; |
| ctx->driver_data = drm_fimd_get_driver_data(pdev); |
| |
| if (of_property_read_bool(dev->of_node, "samsung,invert-vden")) |
| ctx->vidcon1 |= VIDCON1_INV_VDEN; |
| if (of_property_read_bool(dev->of_node, "samsung,invert-vclk")) |
| ctx->vidcon1 |= VIDCON1_INV_VCLK; |
| |
| i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings"); |
| if (i80_if_timings) { |
| u32 val; |
| |
| ctx->i80_if = true; |
| |
| if (ctx->driver_data->has_vidoutcon) |
| ctx->vidout_con |= VIDOUT_CON_F_I80_LDI0; |
| else |
| ctx->vidcon0 |= VIDCON0_VIDOUT_I80_LDI0; |
| /* |
| * The user manual describes that this "DSI_EN" bit is required |
| * to enable I80 24-bit data interface. |
| */ |
| ctx->vidcon0 |= VIDCON0_DSI_EN; |
| |
| if (of_property_read_u32(i80_if_timings, "cs-setup", &val)) |
| val = 0; |
| ctx->i80ifcon = LCD_CS_SETUP(val); |
| if (of_property_read_u32(i80_if_timings, "wr-setup", &val)) |
| val = 0; |
| ctx->i80ifcon |= LCD_WR_SETUP(val); |
| if (of_property_read_u32(i80_if_timings, "wr-active", &val)) |
| val = 1; |
| ctx->i80ifcon |= LCD_WR_ACTIVE(val); |
| if (of_property_read_u32(i80_if_timings, "wr-hold", &val)) |
| val = 0; |
| ctx->i80ifcon |= LCD_WR_HOLD(val); |
| } |
| of_node_put(i80_if_timings); |
| |
| ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, |
| "samsung,sysreg"); |
| if (IS_ERR(ctx->sysreg)) { |
| dev_warn(dev, "failed to get system register.\n"); |
| ctx->sysreg = NULL; |
| } |
| |
| ctx->bus_clk = devm_clk_get(dev, "fimd"); |
| if (IS_ERR(ctx->bus_clk)) { |
| dev_err(dev, "failed to get bus clock\n"); |
| return PTR_ERR(ctx->bus_clk); |
| } |
| |
| ctx->lcd_clk = devm_clk_get(dev, "sclk_fimd"); |
| if (IS_ERR(ctx->lcd_clk)) { |
| dev_err(dev, "failed to get lcd clock\n"); |
| return PTR_ERR(ctx->lcd_clk); |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| ctx->regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(ctx->regs)) |
| return PTR_ERR(ctx->regs); |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, |
| ctx->i80_if ? "lcd_sys" : "vsync"); |
| if (!res) { |
| dev_err(dev, "irq request failed.\n"); |
| return -ENXIO; |
| } |
| |
| ret = devm_request_irq(dev, res->start, fimd_irq_handler, |
| 0, "drm_fimd", ctx); |
| if (ret) { |
| dev_err(dev, "irq request failed.\n"); |
| return ret; |
| } |
| |
| init_waitqueue_head(&ctx->wait_vsync_queue); |
| atomic_set(&ctx->wait_vsync_event, 0); |
| |
| platform_set_drvdata(pdev, ctx); |
| |
| ctx->encoder = exynos_dpi_probe(dev); |
| if (IS_ERR(ctx->encoder)) |
| return PTR_ERR(ctx->encoder); |
| |
| pm_runtime_enable(dev); |
| |
| ret = component_add(dev, &fimd_component_ops); |
| if (ret) |
| goto err_disable_pm_runtime; |
| |
| return ret; |
| |
| err_disable_pm_runtime: |
| pm_runtime_disable(dev); |
| |
| return ret; |
| } |
| |
| static int fimd_remove(struct platform_device *pdev) |
| { |
| pm_runtime_disable(&pdev->dev); |
| |
| component_del(&pdev->dev, &fimd_component_ops); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int exynos_fimd_suspend(struct device *dev) |
| { |
| struct fimd_context *ctx = dev_get_drvdata(dev); |
| |
| clk_disable_unprepare(ctx->lcd_clk); |
| clk_disable_unprepare(ctx->bus_clk); |
| |
| return 0; |
| } |
| |
| static int exynos_fimd_resume(struct device *dev) |
| { |
| struct fimd_context *ctx = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = clk_prepare_enable(ctx->bus_clk); |
| if (ret < 0) { |
| DRM_ERROR("Failed to prepare_enable the bus clk [%d]\n", ret); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(ctx->lcd_clk); |
| if (ret < 0) { |
| DRM_ERROR("Failed to prepare_enable the lcd clk [%d]\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops exynos_fimd_pm_ops = { |
| SET_RUNTIME_PM_OPS(exynos_fimd_suspend, exynos_fimd_resume, NULL) |
| }; |
| |
| struct platform_driver fimd_driver = { |
| .probe = fimd_probe, |
| .remove = fimd_remove, |
| .driver = { |
| .name = "exynos4-fb", |
| .owner = THIS_MODULE, |
| .pm = &exynos_fimd_pm_ops, |
| .of_match_table = fimd_driver_dt_match, |
| }, |
| }; |