Merge tag 'renesas-boards-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
From Simon Horman:
Renesas ARM-based SoC board updates for v3.12
* ape6evm: Add SDHI and MMCIF support
* lager: Add MMCIF support
* armadillo800eva: Add DMA support for MMCIF
* tag 'renesas-boards-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (54 commits)
ARM: shmobile: ape6evm: add SDHI interfaces
ARM: shmobile: ape6evm: add MMCIF support
ARM: shmobile: select the fixed regulator driver on BockW
ARM: shmobile: lager: add MMCIF support
ARM: shmobile: armadillo800eva: add DMA support to MMCIF
ARM: shmobile: Setup r8a7790 arch timer based on MD pins
ARM: shmobile: Introduce r8a7790_read_mode_pins()
ARM: shmobile: r8a7740: add MMCIF DMA definitions
ARM: shmobile: Disconnect EMEV2 SMP code from clocks
ARM: shmobile: Make r8a73a4 Arch timer optional
ARM: shmobile: Add r8a73a4 CMT10 clock event
ARM: shmobile: Make r8a7790 Arch timer optional
ARM: shmobile: Add r8a7790 CMT00 clock event
ARM: shmobile: Sort r8a7790 MSTP entries
ARM: shmobile: r8a73a4: add clocks for I2C controllers
ARM: shmobile: r8a73a4: add Z2 clock support
ARM: shmobile: r8a73a4: safeguard against wrong clk_set_rate() uses
ARM: shmobile: r8a73a4: implement CPU clock scaling for CPUFreq
ARM: shmobile: r8a73a4: wait for completion when kicking the clock
ARM: shmobile: r8a7790: add thermal driver support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 641b3c9..af19e38 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -183,6 +183,7 @@
ccu9540.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+ emev2-kzm9d-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7740-armadillo800eva-reference.dtb \
diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
new file mode 100644
index 0000000..bed676b
--- /dev/null
+++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
@@ -0,0 +1,57 @@
+/*
+ * Device Tree Source for the KZM9D board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/dts-v1/;
+
+/include/ "emev2.dtsi"
+
+/ {
+ model = "EMEV2 KZM9D Board";
+ compatible = "renesas,kzm9d-reference", "renesas,emev2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+ };
+
+ reg_1p8v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lan9220@20000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x20000000 0x10000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio0>;
+ interrupts = <1 1>; /* active high */
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vddvario-supply = <®_1p8v>;
+ vdd33a-supply = <®_3p3v>;
+ };
+};
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index b9b3241..dda13bc 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -21,6 +21,6 @@
};
chosen {
- bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+ bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
};
};
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index c8a8c08..99ad2b2 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -14,6 +14,14 @@
compatible = "renesas,emev2";
interrupt-parent = <&gic>;
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -67,4 +75,55 @@
reg = <0xe1050000 0x38>;
interrupts = <0 11 0>;
};
+
+ gpio0: gpio@e0050000 {
+ compatible = "renesas,em-gio";
+ reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+ interrupts = <0 67 0>, <0 68 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ gpio1: gpio@e0050080 {
+ compatible = "renesas,em-gio";
+ reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
+ interrupts = <0 69 0>, <0 70 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ gpio2: gpio@e0050100 {
+ compatible = "renesas,em-gio";
+ reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
+ interrupts = <0 71 0>, <0 72 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ gpio3: gpio@e0050180 {
+ compatible = "renesas,em-gio";
+ reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
+ interrupts = <0 73 0>, <0 74 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ gpio4: gpio@e0050200 {
+ compatible = "renesas,em-gio";
+ reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
+ interrupts = <0 75 0>, <0 76 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <31>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index f603c69..e657a9db 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -50,3 +50,25 @@
};
};
};
+
+&i2c5 {
+ vdd_dvfs: max8973@1b {
+ compatible = "maxim,max8973";
+ reg = <0x1b>;
+
+ regulator-min-microvolt = <935000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+ operating-points = <
+ /* kHz uV */
+ 1950000 1115000
+ 1462500 995000
+ >;
+ voltage-tolerance = <1>; /* 1% */
+};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4ff2019..6ce699b 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -85,4 +85,130 @@
interrupt-parent = <&gic>;
interrupts = <0 69 4>;
};
+
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 174 0x4>;
+ };
+
+ i2c1: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 175 0x4>;
+ };
+
+ i2c2: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6520000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 176 0x4>;
+ };
+
+ i2c3: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6530000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 177 0x4>;
+ };
+
+ i2c4: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6540000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 178 0x4>;
+ };
+
+ i2c5: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 179 0x4>;
+ };
+
+ i2c6: i2c@e6550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6550000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 184 0x4>;
+ };
+
+ i2c7: i2c@e6560000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6560000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 185 0x4>;
+ };
+
+ i2c8: i2c@e6570000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6570000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 173 0x4>;
+ };
+
+ mmcif0: mmcif@ee200000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 169 0x4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ mmcif1: mmcif@ee220000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee220000 0 0x80>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 170 0x4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ sdhi0: sdhi@ee100000 {
+ compatible = "renesas,r8a73a4-sdhi";
+ reg = <0 0xee100000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 165 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sdhi1: sdhi@ee120000 {
+ compatible = "renesas,r8a73a4-sdhi";
+ reg = <0 0xee120000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 166 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sdhi2: sdhi@ee140000 {
+ compatible = "renesas,r8a73a4-sdhi";
+ reg = <0 0xee140000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 167 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 339d9b1..9cd8820 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -54,4 +54,58 @@
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>;
};
+
+ mmcif0: mmcif@ee200000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 169 0x4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ mmcif1: mmcif@ee220000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee220000 0 0x80>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 170 0x4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ sdhi0: sdhi@ee100000 {
+ compatible = "renesas,r8a7790-sdhi";
+ reg = <0 0xee100000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 165 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sdhi1: sdhi@ee120000 {
+ compatible = "renesas,r8a7790-sdhi";
+ reg = <0 0xee120000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 166 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sdhi2: sdhi@ee140000 {
+ compatible = "renesas,r8a7790-sdhi";
+ reg = <0 0xee140000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 167 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sdhi3: sdhi@ee160000 {
+ compatible = "renesas,r8a7790-sdhi";
+ reg = <0 0xee160000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 168 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3912ce9..f76fca6 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -23,9 +23,10 @@
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
- select HAVE_ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
@@ -59,7 +60,6 @@
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
- select HAVE_ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
@@ -124,6 +124,7 @@
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select RENESAS_INTC_IRQPIN
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
config MACH_MARZEN
@@ -156,6 +157,18 @@
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
+config MACH_KZM9D_REFERENCE
+ bool "KZM9D board - Reference Device Tree Implementation"
+ depends on ARCH_EMEV2
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select USE_OF
+ ---help---
+ Use reference implementation of KZM9D board support
+ which makes a greater use of device tree at the expense
+ of not supporting a number of devices.
+
+ This is intended to aid developers
+
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 6165a51..e8d0a2c 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -46,6 +46,7 @@
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o
+obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 84c6868..7785c52 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -7,6 +7,7 @@
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
+loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 5eb0caa..ccf8b04 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -20,8 +20,11 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
-#include <linux/irqchip.h>
#include <linux/kernel.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
@@ -55,6 +58,53 @@
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
};
+/*
+ * On APE6EVM power is supplied to MMCIF by a tps80032 regulator. For now we
+ * model a VDD supply to MMCIF, using a fixed 3.3V regulator. Also use the
+ * static power supply for SDHI0 and SDHI1, whereas SDHI0's VccQ is also
+ * supplied by the same tps80032 regulator and thus can also be adjusted
+ * dynamically.
+ */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+};
+
+/* MMCIF */
+static struct sh_mmcif_plat_data mmcif0_pdata = {
+ .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct resource mmcif0_resources[] = {
+ DEFINE_RES_MEM_NAMED(0xee200000, 0x100, "MMCIF0"),
+ DEFINE_RES_IRQ(gic_spi(169)),
+};
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_pdata = {
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+};
+
+static struct resource sdhi0_resources[] = {
+ DEFINE_RES_MEM_NAMED(0xee100000, 0x100, "SDHI0"),
+ DEFINE_RES_IRQ(gic_spi(165)),
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_pdata = {
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_NEEDS_POLL,
+};
+
+static struct resource sdhi1_resources[] = {
+ DEFINE_RES_MEM_NAMED(0xee120000, 0x100, "SDHI1"),
+ DEFINE_RES_IRQ(gic_spi(166)),
+};
+
static const struct pinctrl_map ape6evm_pinctrl_map[] = {
/* SCIFA0 console */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4",
@@ -62,6 +112,23 @@
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4",
"irqc_irq40", "irqc"),
+ /* MMCIF0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
+ "mmc0_data8", "mmc0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
+ "mmc0_ctrl", "mmc0"),
+ /* SDHI0: uSD: no WP */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
+ "sdhi0_data4", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
+ "sdhi0_ctrl", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
+ "sdhi0_cd", "sdhi0"),
+ /* SDHI1 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
+ "sdhi1_data4", "sdhi1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
+ "sdhi1_ctrl", "sdhi1"),
};
static void __init ape6evm_add_standard_devices(void)
@@ -94,6 +161,17 @@
platform_device_register_resndata(&platform_bus, "smsc911x", -1,
lan9220_res, ARRAY_SIZE(lan9220_res),
&lan9220_data, sizeof(lan9220_data));
+ regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+ platform_device_register_resndata(&platform_bus, "sh_mmcif", 0,
+ mmcif0_resources, ARRAY_SIZE(mmcif0_resources),
+ &mmcif0_pdata, sizeof(mmcif0_pdata));
+ platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
+ sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+ &sdhi0_pdata, sizeof(sdhi0_pdata));
+ platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1,
+ sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
+ &sdhi1_pdata, sizeof(sdhi1_pdata));
}
static const char *ape6evm_boards_compat_dt[] __initdata = {
@@ -102,7 +180,7 @@
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_irq = irqchip_init,
+ .init_early = r8a73a4_init_delay,
.init_time = shmobile_timer_init,
.init_machine = ape6evm_add_standard_devices,
.dt_compat = ape6evm_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 9457c76..2412fca 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -724,15 +724,6 @@
};
/* SDHI0 */
-/*
- * FIXME
- *
- * It use polling mode here, since
- * CD (= Card Detect) pin is not connected to SDHI0_CD.
- * We can use IRQ31 as card detect irq,
- * but it needs chattering removal operation
- */
-#define IRQ31 irq_pin(31)
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
@@ -833,6 +824,8 @@
.caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_8_BIT_DATA |
MMC_CAP_NONREMOVABLE,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct resource sh_mmcif_resources[] = {
diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c
new file mode 100644
index 0000000..a7b28b2
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c
@@ -0,0 +1,46 @@
+/*
+ * kzm9d board support - Reference DT implementation
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <mach/emev2.h>
+#include <mach/common.h>
+#include <asm/mach/arch.h>
+
+static void __init kzm9d_add_standard_devices(void)
+{
+ emev2_clock_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *kzm9d_boards_compat_dt[] __initdata = {
+ "renesas,kzm9d-reference",
+ NULL,
+};
+
+DT_MACHINE_START(KZM9D_DT, "kzm9d")
+ .smp = smp_ops(emev2_smp_ops),
+ .map_io = emev2_map_io,
+ .init_early = emev2_init_delay,
+ .init_machine = kzm9d_add_standard_devices,
+ .init_late = shmobile_init_late,
+ .dt_compat = kzm9d_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 4368000..30c2cc6 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -85,9 +85,7 @@
DT_MACHINE_START(KZM9D_DT, "kzm9d")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
- .init_early = emev2_add_early_devices,
- .nr_irqs = NR_IRQS_LEGACY,
- .init_irq = emev2_init_irq,
+ .init_early = emev2_init_delay,
.init_machine = kzm9d_add_standard_devices,
.init_late = shmobile_init_late,
.dt_compat = kzm9d_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 44055fe..41092bb 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -24,7 +24,6 @@
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/irqchip.h>
#include <linux/input.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/machine.h>
@@ -99,7 +98,6 @@
.map_io = sh73a0_map_io,
.init_early = sh73a0_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
- .init_irq = irqchip_init,
.init_machine = kzm_init,
.init_time = shmobile_timer_init,
.dt_compat = kzm9g_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index d73e21d..3c67b2a 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -22,13 +22,17 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/interrupt.h>
-#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <mach/common.h>
+#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -71,6 +75,22 @@
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
+/* Fixed 3.3V regulator to be used by MMCIF */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
+};
+
+/* MMCIF */
+static struct sh_mmcif_plat_data mmcif1_pdata = {
+ .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct resource mmcif1_resources[] = {
+ DEFINE_RES_MEM_NAMED(0xee220000, 0x80, "MMCIF1"),
+ DEFINE_RES_IRQ(gic_spi(170)),
+};
+
static const struct pinctrl_map lager_pinctrl_map[] = {
/* SCIF0 (CN19: DEBUG SERIAL0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
@@ -78,6 +98,11 @@
/* SCIF1 (CN20: DEBUG SERIAL1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
"scif1_data", "scif1"),
+ /* MMCIF1 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
+ "mmc1_data8", "mmc1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
+ "mmc1_ctrl", "mmc1"),
};
static void __init lager_add_standard_devices(void)
@@ -95,6 +120,11 @@
platform_device_register_data(&platform_bus, "gpio-keys", -1,
&lager_keys_pdata,
sizeof(lager_keys_pdata));
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+ platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
+ mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
+ &mmcif1_pdata, sizeof(mmcif1_pdata));
}
static const char *lager_boards_compat_dt[] __initdata = {
@@ -103,7 +133,7 @@
};
DT_MACHINE_START(LAGER_DT, "lager")
- .init_irq = irqchip_init,
+ .init_early = r8a7790_init_delay,
.init_time = r8a7790_timer_init,
.init_machine = lager_add_standard_devices,
.dt_compat = lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c
index 4710f18..5ac13ba 100644
--- a/arch/arm/mach-shmobile/clock-emev2.c
+++ b/arch/arm/mach-shmobile/clock-emev2.c
@@ -40,7 +40,6 @@
#define USIB2SCLKDIV 0x65c
#define USIB3SCLKDIV 0x660
#define STI_CLKSEL 0x688
-#define SMU_GENERAL_REG0 0x7c0
/* not pretty, but hey */
static void __iomem *smu_base;
@@ -51,11 +50,6 @@
iowrite32(value, smu_base + offs);
}
-void emev2_set_boot_vector(unsigned long value)
-{
- emev2_smu_write(value, SMU_GENERAL_REG0);
-}
-
static struct clk_mapping smu_mapping = {
.phys = EMEV2_SMU_BASE,
.len = PAGE_SIZE,
@@ -205,23 +199,11 @@
void __init emev2_clock_init(void)
{
int k, ret = 0;
- static int is_setup;
-
- /* yuck, this is ugly as hell, but the non-smp case of clocks
- * code is now designed to rely on ioremap() instead of static
- * entity maps. in the case of smp we need access to the SMU
- * register earlier than ioremap() is actually working without
- * any static maps. to enable SMP in ugly but with dynamic
- * mappings we have to call emev2_clock_init() from different
- * places depending on UP and SMP...
- */
- if (is_setup++)
- return;
smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
BUG_ON(!smu_base);
- /* setup STI timer to run on 37.768 kHz and deassert reset */
+ /* setup STI timer to run on 32.768 kHz and deassert reset */
emev2_smu_write(0, STI_CLKSEL);
emev2_smu_write(1, STI_RSTCTRL);
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 5f7fe62..8ea5ef6 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -30,10 +30,12 @@
#define SMSTPCR2 0xe6150138
#define SMSTPCR3 0xe615013c
+#define SMSTPCR4 0xe6150140
#define SMSTPCR5 0xe6150144
#define FRQCRA 0xE6150000
#define FRQCRB 0xE6150004
+#define FRQCRC 0xE61500E0
#define VCLKCR1 0xE6150008
#define VCLKCR2 0xE615000C
#define VCLKCR3 0xE615001C
@@ -52,6 +54,7 @@
#define HSICKCR 0xE615026C
#define M4CKCR 0xE6150098
#define PLLECR 0xE61500D0
+#define PLL0CR 0xE61500D8
#define PLL1CR 0xE6150028
#define PLL2CR 0xE615002C
#define PLL2SCR 0xE61501F4
@@ -177,6 +180,7 @@
.mapping = &cpg_mapping, \
}
+PLL_CLOCK(pll0_clk, &main_clk, pll_parent_main, 1, 20, PLL0CR, 0);
PLL_CLOCK(pll1_clk, &main_clk, pll_parent_main, 1, 7, PLL1CR, 1);
PLL_CLOCK(pll2_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR, 2);
PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4);
@@ -184,6 +188,157 @@
SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2);
+static atomic_t frqcr_lock;
+
+/* Several clocks need to access FRQCRB, have to lock */
+static bool frqcr_kick_check(struct clk *clk)
+{
+ return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31));
+}
+
+static int frqcr_kick_do(struct clk *clk)
+{
+ int i;
+
+ /* set KICK bit in FRQCRB to update hardware setting, check success */
+ iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB));
+ for (i = 1000; i; i--)
+ if (ioread32(CPG_MAP(FRQCRB)) & BIT(31))
+ cpu_relax();
+ else
+ return 0;
+
+ return -ETIMEDOUT;
+}
+
+static int zclk_set_rate(struct clk *clk, unsigned long rate)
+{
+ void __iomem *frqcrc;
+ int ret;
+ unsigned long step, p_rate;
+ u32 val;
+
+ if (!clk->parent || !__clk_get(clk->parent))
+ return -ENODEV;
+
+ if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) {
+ ret = -EBUSY;
+ goto done;
+ }
+
+ /*
+ * Users are supposed to first call clk_set_rate() only with
+ * clk_round_rate() results. So, we don't fix wrong rates here, but
+ * guard against them anyway
+ */
+
+ p_rate = clk_get_rate(clk->parent);
+ if (rate == p_rate) {
+ val = 0;
+ } else {
+ step = DIV_ROUND_CLOSEST(p_rate, 32);
+
+ if (rate > p_rate || rate < step) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ val = 32 - rate / step;
+ }
+
+ frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg);
+
+ iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) |
+ (val << clk->enable_bit), frqcrc);
+
+ ret = frqcr_kick_do(clk);
+
+done:
+ atomic_dec(&frqcr_lock);
+ __clk_put(clk->parent);
+ return ret;
+}
+
+static long zclk_round_rate(struct clk *clk, unsigned long rate)
+{
+ /*
+ * theoretical rate = parent rate * multiplier / 32,
+ * where 1 <= multiplier <= 32. Therefore we should do
+ * multiplier = rate * 32 / parent rate
+ * rounded rate = parent rate * multiplier / 32.
+ * However, multiplication before division won't fit in 32 bits, so
+ * we sacrifice some precision by first dividing and then multiplying.
+ * To find the nearest divisor we calculate both and pick up the best
+ * one. This avoids 64-bit arithmetics.
+ */
+ unsigned long step, mul_min, mul_max, rate_min, rate_max;
+
+ rate_max = clk_get_rate(clk->parent);
+
+ /* output freq <= parent */
+ if (rate >= rate_max)
+ return rate_max;
+
+ step = DIV_ROUND_CLOSEST(rate_max, 32);
+ /* output freq >= parent / 32 */
+ if (step >= rate)
+ return step;
+
+ mul_min = rate / step;
+ mul_max = DIV_ROUND_UP(rate, step);
+ rate_min = step * mul_min;
+ if (mul_max == mul_min)
+ return rate_min;
+
+ rate_max = step * mul_max;
+
+ if (rate_max - rate < rate - rate_min)
+ return rate_max;
+
+ return rate_min;
+}
+
+static unsigned long zclk_recalc(struct clk *clk)
+{
+ void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg;
+ unsigned int max = clk->div_mask + 1;
+ unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) &
+ clk->div_mask);
+
+ return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) *
+ (max - val);
+}
+
+static struct sh_clk_ops zclk_ops = {
+ .recalc = zclk_recalc,
+ .set_rate = zclk_set_rate,
+ .round_rate = zclk_round_rate,
+};
+
+static struct clk z_clk = {
+ .parent = &pll0_clk,
+ .div_mask = 0x1f,
+ .enable_bit = 8,
+ /* We'll need to access FRQCRB and FRQCRC */
+ .enable_reg = (void __iomem *)FRQCRB,
+ .ops = &zclk_ops,
+};
+
+/*
+ * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3
+ * switching is only available in auto-DVFS mode
+ */
+SH_FIXED_RATIO_CLK(pll0_div2_clk, pll0_clk, div2);
+
+static struct clk z2_clk = {
+ .parent = &pll0_div2_clk,
+ .div_mask = 0x1f,
+ .enable_bit = 0,
+ /* We'll need to access FRQCRB and FRQCRC */
+ .enable_reg = (void __iomem *)FRQCRB,
+ .ops = &zclk_ops,
+};
+
static struct clk *main_clks[] = {
&extalr_clk,
&extal1_clk,
@@ -195,22 +350,23 @@
&main_div2_clk,
&fsiack_clk,
&fsibck_clk,
+ &pll0_clk,
&pll1_clk,
&pll1_div2_clk,
&pll2_clk,
&pll2s_clk,
&pll2h_clk,
+ &z_clk,
+ &pll0_div2_clk,
+ &z2_clk,
};
/* DIV4 */
static void div4_kick(struct clk *clk)
{
- unsigned long value;
-
- /* set KICK bit in FRQCRB to update hardware setting */
- value = ioread32(CPG_MAP(FRQCRB));
- value |= (1 << 31);
- iowrite32(value, CPG_MAP(FRQCRB));
+ if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n"))
+ frqcr_kick_do(clk);
+ atomic_dec(&frqcr_lock);
}
static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10};
@@ -349,8 +505,10 @@
/* MSTP */
enum {
MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
- MSTP315, MSTP314, MSTP313, MSTP312, MSTP305,
- MSTP522,
+ MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
+ MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
+ MSTP411, MSTP410, MSTP409,
+ MSTP522, MSTP515,
MSTP_NR
};
@@ -361,12 +519,22 @@
[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */
[MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */
[MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */
+ [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 0, 0), /* IIC2 */
[MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */
[MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */
[MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */
+ [MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 16, 0), /* IIC6 */
+ [MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 17, 0), /* IIC7 */
+ [MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* IIC0 */
+ [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
+ [MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */
+ [MSTP409] = SH_CLK_MSTP32(&main_div2_clk, SMSTPCR4, 9, 0), /* IIC5 */
+ [MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
+ [MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
[MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
+ [MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR5, 15, 0), /* IIC8 */
};
static struct clk_lookup lookups[] = {
@@ -386,6 +554,9 @@
CLKDEV_CON_ID("pll2s", &pll2s_clk),
CLKDEV_CON_ID("pll2h", &pll2h_clk),
+ /* CPU clock */
+ CLKDEV_DEV_ID("cpufreq-cpu0", &z_clk),
+
/* DIV6 */
CLKDEV_CON_ID("zb", &div6_clks[DIV6_ZB]),
CLKDEV_CON_ID("vck1", &div6_clks[DIV6_VCK1]),
@@ -408,6 +579,7 @@
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
@@ -418,6 +590,15 @@
CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
+ CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]),
+ CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
+ CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
+ CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
+ CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
+ CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
+ CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
+ CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]),
/* for DT */
CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
@@ -429,6 +610,8 @@
int k, ret = 0;
u32 ckscr;
+ atomic_set(&frqcr_lock, -1);
+
reg = ioremap_nocache(CKSCR, PAGE_SIZE);
BUG_ON(!reg);
ckscr = ioread32(reg);
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 5d71313..50d96f9 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -24,6 +24,7 @@
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
+#include <mach/r8a7790.h>
/*
* MD EXTAL PLL0 PLL1 PLL3
@@ -42,16 +43,15 @@
* see "p1 / 2" on R8A7790_CLOCK_ROOT() below
*/
-#define MD(nr) (1 << nr)
-
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x1000
+#define SMSTPCR1 0xe6150134
#define SMSTPCR2 0xe6150138
#define SMSTPCR3 0xe615013c
+#define SMSTPCR5 0xe6150144
#define SMSTPCR7 0xe615014c
-#define MODEMR 0xE6160060
#define SDCKCR 0xE6150074
#define SD2CKCR 0xE6150078
#define SD3CKCR 0xE615007C
@@ -182,14 +182,19 @@
enum {
MSTP721, MSTP720,
MSTP717, MSTP716,
+ MSTP522,
MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
+ MSTP124,
MSTP_NR
};
static struct clk mstp_clks[MSTP_NR] = {
[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+ [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
+ [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+ [MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */
@@ -203,8 +208,7 @@
[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
- [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
- [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+ [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
};
static struct clk_lookup lookups[] = {
@@ -254,6 +258,7 @@
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
+ CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
@@ -266,6 +271,7 @@
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
+ CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
};
#define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
@@ -280,14 +286,9 @@
void __init r8a7790_clock_init(void)
{
- void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
- u32 mode;
+ u32 mode = r8a7790_read_mode_pins();
int k, ret = 0;
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
switch (mode & (MD(14) | MD(13))) {
case 0:
R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h
deleted file mode 100644
index 40a8c178..0000000
--- a/arch/arm/mach-shmobile/include/mach/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index ac37517..c2eb756 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -2,11 +2,9 @@
#define __ASM_EMEV2_H__
extern void emev2_map_io(void);
-extern void emev2_init_irq(void);
-extern void emev2_add_early_devices(void);
+extern void emev2_init_delay(void);
extern void emev2_add_standard_devices(void);
extern void emev2_clock_init(void);
-extern void emev2_set_boot_vector(unsigned long value);
#define EMEV2_GPIO_BASE 200
#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index f043103..144a85e 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -4,5 +4,6 @@
void r8a73a4_add_standard_devices(void);
void r8a73a4_clock_init(void);
void r8a73a4_pinmux_init(void);
+void r8a73a4_init_delay(void);
#endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index b34d19b..56f3750 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -42,6 +42,8 @@
SHDMA_SLAVE_FSIB_TX,
SHDMA_SLAVE_USBHS_TX,
SHDMA_SLAVE_USBHS_RX,
+ SHDMA_SLAVE_MMCIF_TX,
+ SHDMA_SLAVE_MMCIF_RX,
};
extern void r8a7740_meram_workaround(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index 851d027..9b561bf 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -33,7 +33,6 @@
extern void r8a7778_init_late(void);
extern void r8a7778_init_delay(void);
-extern void r8a7778_init_irq(void);
extern void r8a7778_init_irq_dt(void);
extern void r8a7778_clock_init(void);
extern void r8a7778_init_irq_extpin(int irlm);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 2e919e6..7aaef40 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -4,6 +4,10 @@
void r8a7790_add_standard_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
+void r8a7790_init_delay(void);
void r8a7790_timer_init(void);
+#define MD(nr) BIT(nr)
+u32 r8a7790_read_mode_pins(void);
+
#endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 1ccddd2..19980be 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -20,7 +20,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/irqchip.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-em.h>
#include <linux/of_platform.h>
@@ -39,13 +38,6 @@
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
- /* 128K entity map for 0xe0100000 (SMU) */
- {
- .virtual = 0xe0100000,
- .pfn = __phys_to_pfn(0xe0100000),
- .length = SZ_128K,
- .type = MT_DEVICE
- },
/* 2M mapping for SCU + L2 controller */
{
.virtual = 0xf0000000,
@@ -63,102 +55,40 @@
/* UART */
static struct resource uart0_resources[] = {
- [0] = {
- .start = 0xe1020000,
- .end = 0xe1020037,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 40,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device uart0_device = {
- .name = "serial8250-em",
- .id = 0,
- .num_resources = ARRAY_SIZE(uart0_resources),
- .resource = uart0_resources,
+ DEFINE_RES_MEM(0xe1020000, 0x38),
+ DEFINE_RES_IRQ(40),
};
static struct resource uart1_resources[] = {
- [0] = {
- .start = 0xe1030000,
- .end = 0xe1030037,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 41,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device uart1_device = {
- .name = "serial8250-em",
- .id = 1,
- .num_resources = ARRAY_SIZE(uart1_resources),
- .resource = uart1_resources,
+ DEFINE_RES_MEM(0xe1030000, 0x38),
+ DEFINE_RES_IRQ(41),
};
static struct resource uart2_resources[] = {
- [0] = {
- .start = 0xe1040000,
- .end = 0xe1040037,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 42,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device uart2_device = {
- .name = "serial8250-em",
- .id = 2,
- .num_resources = ARRAY_SIZE(uart2_resources),
- .resource = uart2_resources,
+ DEFINE_RES_MEM(0xe1040000, 0x38),
+ DEFINE_RES_IRQ(42),
};
static struct resource uart3_resources[] = {
- [0] = {
- .start = 0xe1050000,
- .end = 0xe1050037,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 43,
- .flags = IORESOURCE_IRQ,
- }
+ DEFINE_RES_MEM(0xe1050000, 0x38),
+ DEFINE_RES_IRQ(43),
};
-static struct platform_device uart3_device = {
- .name = "serial8250-em",
- .id = 3,
- .num_resources = ARRAY_SIZE(uart3_resources),
- .resource = uart3_resources,
-};
+#define emev2_register_uart(idx) \
+ platform_device_register_simple("serial8250-em", idx, \
+ uart##idx##_resources, \
+ ARRAY_SIZE(uart##idx##_resources))
/* STI */
static struct resource sti_resources[] = {
- [0] = {
- .name = "STI",
- .start = 0xe0180000,
- .end = 0xe0180053,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 157,
- .flags = IORESOURCE_IRQ,
- },
+ DEFINE_RES_MEM(0xe0180000, 0x54),
+ DEFINE_RES_IRQ(157),
};
-static struct platform_device sti_device = {
- .name = "em_sti",
- .id = 0,
- .resource = sti_resources,
- .num_resources = ARRAY_SIZE(sti_resources),
-};
-
+#define emev2_register_sti() \
+ platform_device_register_simple("em_sti", 0, \
+ sti_resources, \
+ ARRAY_SIZE(sti_resources))
/* GIO */
static struct gpio_em_config gio0_config = {
@@ -168,36 +98,10 @@
};
static struct resource gio0_resources[] = {
- [0] = {
- .name = "GIO_000",
- .start = 0xe0050000,
- .end = 0xe005002b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "GIO_000",
- .start = 0xe0050040,
- .end = 0xe005005f,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 99,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 100,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gio0_device = {
- .name = "em_gio",
- .id = 0,
- .resource = gio0_resources,
- .num_resources = ARRAY_SIZE(gio0_resources),
- .dev = {
- .platform_data = &gio0_config,
- },
+ DEFINE_RES_MEM(0xe0050000, 0x2c),
+ DEFINE_RES_MEM(0xe0050040, 0x20),
+ DEFINE_RES_IRQ(99),
+ DEFINE_RES_IRQ(100),
};
static struct gpio_em_config gio1_config = {
@@ -207,36 +111,10 @@
};
static struct resource gio1_resources[] = {
- [0] = {
- .name = "GIO_032",
- .start = 0xe0050080,
- .end = 0xe00500ab,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "GIO_032",
- .start = 0xe00500c0,
- .end = 0xe00500df,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 101,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 102,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gio1_device = {
- .name = "em_gio",
- .id = 1,
- .resource = gio1_resources,
- .num_resources = ARRAY_SIZE(gio1_resources),
- .dev = {
- .platform_data = &gio1_config,
- },
+ DEFINE_RES_MEM(0xe0050080, 0x2c),
+ DEFINE_RES_MEM(0xe00500c0, 0x20),
+ DEFINE_RES_IRQ(101),
+ DEFINE_RES_IRQ(102),
};
static struct gpio_em_config gio2_config = {
@@ -246,36 +124,10 @@
};
static struct resource gio2_resources[] = {
- [0] = {
- .name = "GIO_064",
- .start = 0xe0050100,
- .end = 0xe005012b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "GIO_064",
- .start = 0xe0050140,
- .end = 0xe005015f,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 103,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 104,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gio2_device = {
- .name = "em_gio",
- .id = 2,
- .resource = gio2_resources,
- .num_resources = ARRAY_SIZE(gio2_resources),
- .dev = {
- .platform_data = &gio2_config,
- },
+ DEFINE_RES_MEM(0xe0050100, 0x2c),
+ DEFINE_RES_MEM(0xe0050140, 0x20),
+ DEFINE_RES_IRQ(103),
+ DEFINE_RES_IRQ(104),
};
static struct gpio_em_config gio3_config = {
@@ -285,36 +137,10 @@
};
static struct resource gio3_resources[] = {
- [0] = {
- .name = "GIO_096",
- .start = 0xe0050180,
- .end = 0xe00501ab,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "GIO_096",
- .start = 0xe00501c0,
- .end = 0xe00501df,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 105,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 106,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gio3_device = {
- .name = "em_gio",
- .id = 3,
- .resource = gio3_resources,
- .num_resources = ARRAY_SIZE(gio3_resources),
- .dev = {
- .platform_data = &gio3_config,
- },
+ DEFINE_RES_MEM(0xe0050180, 0x2c),
+ DEFINE_RES_MEM(0xe00501c0, 0x20),
+ DEFINE_RES_IRQ(105),
+ DEFINE_RES_IRQ(106),
};
static struct gpio_em_config gio4_config = {
@@ -324,126 +150,52 @@
};
static struct resource gio4_resources[] = {
- [0] = {
- .name = "GIO_128",
- .start = 0xe0050200,
- .end = 0xe005022b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "GIO_128",
- .start = 0xe0050240,
- .end = 0xe005025f,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 107,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 108,
- .flags = IORESOURCE_IRQ,
- },
+ DEFINE_RES_MEM(0xe0050200, 0x2c),
+ DEFINE_RES_MEM(0xe0050240, 0x20),
+ DEFINE_RES_IRQ(107),
+ DEFINE_RES_IRQ(108),
};
-static struct platform_device gio4_device = {
- .name = "em_gio",
- .id = 4,
- .resource = gio4_resources,
- .num_resources = ARRAY_SIZE(gio4_resources),
- .dev = {
- .platform_data = &gio4_config,
- },
-};
+#define emev2_register_gio(idx) \
+ platform_device_register_resndata(&platform_bus, "em_gio", \
+ idx, gio##idx##_resources, \
+ ARRAY_SIZE(gio##idx##_resources), \
+ &gio##idx##_config, \
+ sizeof(struct gpio_em_config))
static struct resource pmu_resources[] = {
- [0] = {
- .start = 152,
- .end = 152,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = 153,
- .end = 153,
- .flags = IORESOURCE_IRQ,
- },
+ DEFINE_RES_IRQ(152),
+ DEFINE_RES_IRQ(153),
};
-static struct platform_device pmu_device = {
- .name = "arm-pmu",
- .id = -1,
- .num_resources = ARRAY_SIZE(pmu_resources),
- .resource = pmu_resources,
-};
-
-static struct platform_device *emev2_early_devices[] __initdata = {
- &uart0_device,
- &uart1_device,
- &uart2_device,
- &uart3_device,
-};
-
-static struct platform_device *emev2_late_devices[] __initdata = {
- &sti_device,
- &gio0_device,
- &gio1_device,
- &gio2_device,
- &gio3_device,
- &gio4_device,
- &pmu_device,
-};
+#define emev2_register_pmu() \
+ platform_device_register_simple("arm-pmu", -1, \
+ pmu_resources, \
+ ARRAY_SIZE(pmu_resources))
void __init emev2_add_standard_devices(void)
{
emev2_clock_init();
- platform_add_devices(emev2_early_devices,
- ARRAY_SIZE(emev2_early_devices));
-
- platform_add_devices(emev2_late_devices,
- ARRAY_SIZE(emev2_late_devices));
+ emev2_register_uart(0);
+ emev2_register_uart(1);
+ emev2_register_uart(2);
+ emev2_register_uart(3);
+ emev2_register_sti();
+ emev2_register_gio(0);
+ emev2_register_gio(1);
+ emev2_register_gio(2);
+ emev2_register_gio(3);
+ emev2_register_gio(4);
+ emev2_register_pmu();
}
-static void __init emev2_init_delay(void)
+void __init emev2_init_delay(void)
{
shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
}
-void __init emev2_add_early_devices(void)
-{
- emev2_init_delay();
-
- early_platform_add_devices(emev2_early_devices,
- ARRAY_SIZE(emev2_early_devices));
-
- /* setup early console here as well */
- shmobile_setup_console();
-}
-
-void __init emev2_init_irq(void)
-{
- void __iomem *gic_dist_base;
- void __iomem *gic_cpu_base;
-
- /* Static mappings, never released */
- gic_dist_base = ioremap(0xe0028000, PAGE_SIZE);
- gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE);
- BUG_ON(!gic_dist_base || !gic_cpu_base);
-
- /* Use GIC to handle interrupts */
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
-}
-
#ifdef CONFIG_USE_OF
-static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = {
- { }
-};
-
-static void __init emev2_add_standard_devices_dt(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table,
- emev2_auxdata_lookup, NULL);
-}
static const char *emev2_boards_compat_dt[] __initdata = {
"renesas,emev2",
@@ -452,10 +204,8 @@
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
+ .map_io = emev2_map_io,
.init_early = emev2_init_delay,
- .nr_irqs = NR_IRQS_LEGACY,
- .init_irq = irqchip_init,
- .init_machine = emev2_add_standard_devices_dt,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 7f45c2e..d533bd2 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -18,11 +18,11 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/irq.h>
-#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a73a4.h>
@@ -169,6 +169,25 @@
thermal0_resources, \
ARRAY_SIZE(thermal0_resources))
+static struct sh_timer_config cmt10_platform_data = {
+ .name = "CMT10",
+ .timer_bit = 0,
+ .clockevent_rating = 80,
+};
+
+static struct resource cmt10_resources[] = {
+ DEFINE_RES_MEM(0xe6130010, 0x0c),
+ DEFINE_RES_MEM(0xe6130000, 0x04),
+ DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */
+};
+
+#define r8a7790_register_cmt(idx) \
+ platform_device_register_resndata(&platform_bus, "sh_cmt", \
+ idx, cmt##idx##_resources, \
+ ARRAY_SIZE(cmt##idx##_resources), \
+ &cmt##idx##_platform_data, \
+ sizeof(struct sh_timer_config))
+
void __init r8a73a4_add_standard_devices(void)
{
r8a73a4_register_scif(SCIFA0);
@@ -180,11 +199,20 @@
r8a73a4_register_irqc(0);
r8a73a4_register_irqc(1);
r8a73a4_register_thermal();
+ r8a7790_register_cmt(10);
+}
+
+void __init r8a73a4_init_delay(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+ shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
+#endif
}
#ifdef CONFIG_USE_OF
void __init r8a73a4_add_standard_devices_dt(void)
{
+ platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -194,7 +222,7 @@
};
DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
- .init_irq = irqchip_init,
+ .init_early = r8a73a4_init_delay,
.init_machine = r8a73a4_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = r8a73a4_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 00c5a70..84c5bb6 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -588,6 +588,16 @@
.addr = 0xfe1f0064,
.chcr = CHCR_TX(XMIT_SZ_32BIT),
.mid_rid = 0xb5,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF_TX,
+ .addr = 0xe6bd0034,
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd1,
+ }, {
+ .slave_id = SHDMA_SLAVE_MMCIF_RX,
+ .addr = 0xe6bd0034,
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd2,
},
};
@@ -986,16 +996,22 @@
#ifdef CONFIG_USE_OF
-static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
- { }
-};
+void __init r8a7740_add_early_devices_dt(void)
+{
+ shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+
+ early_platform_add_devices(r8a7740_early_devices,
+ ARRAY_SIZE(r8a7740_early_devices));
+
+ /* setup early console here as well */
+ shmobile_setup_console();
+}
void __init r8a7740_add_standard_devices_dt(void)
{
platform_add_devices(r8a7740_devices_dt,
ARRAY_SIZE(r8a7740_devices_dt));
- of_platform_populate(NULL, of_default_bus_match_table,
- r8a7740_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
void __init r8a7740_init_delay(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 80c2039..a3a2e37 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -53,7 +53,7 @@
.irqs = SCIx_IRQ_MUXED(irq), \
}
-static struct plat_sci_port scif_platform_data[] = {
+static struct plat_sci_port scif_platform_data[] __initdata = {
SCIF_INFO(0xffe40000, gic_iid(0x66)),
SCIF_INFO(0xffe41000, gic_iid(0x67)),
SCIF_INFO(0xffe42000, gic_iid(0x68)),
@@ -63,24 +63,24 @@
};
/* TMU */
-static struct resource sh_tmu0_resources[] = {
+static struct resource sh_tmu0_resources[] __initdata = {
DEFINE_RES_MEM(0xffd80008, 12),
DEFINE_RES_IRQ(gic_iid(0x40)),
};
-static struct sh_timer_config sh_tmu0_platform_data = {
+static struct sh_timer_config sh_tmu0_platform_data __initdata = {
.name = "TMU00",
.channel_offset = 0x4,
.timer_bit = 0,
.clockevent_rating = 200,
};
-static struct resource sh_tmu1_resources[] = {
+static struct resource sh_tmu1_resources[] __initdata = {
DEFINE_RES_MEM(0xffd80014, 12),
DEFINE_RES_IRQ(gic_iid(0x41)),
};
-static struct sh_timer_config sh_tmu1_platform_data = {
+static struct sh_timer_config sh_tmu1_platform_data __initdata = {
.name = "TMU01",
.channel_offset = 0x10,
.timer_bit = 1,
@@ -189,7 +189,7 @@
USB_PLATFORM_INFO(ohci);
/* Ether */
-static struct resource ether_resources[] = {
+static struct resource ether_resources[] __initdata = {
DEFINE_RES_MEM(0xfde00000, 0x400),
DEFINE_RES_IRQ(gic_iid(0x89)),
};
@@ -203,17 +203,17 @@
}
/* PFC/GPIO */
-static struct resource pfc_resources[] = {
+static struct resource pfc_resources[] __initdata = {
DEFINE_RES_MEM(0xfffc0000, 0x118),
};
#define R8A7778_GPIO(idx) \
-static struct resource r8a7778_gpio##idx##_resources[] = { \
+static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \
DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \
DEFINE_RES_IRQ(gic_iid(0x87)), \
}; \
\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = { \
+static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
.gpio_base = 32 * (idx), \
.irq_base = GPIO_IRQ_BASE(idx), \
.number_of_pins = 32, \
@@ -249,7 +249,7 @@
};
/* SDHI */
-static struct resource sdhi_resources[] = {
+static struct resource sdhi_resources[] __initdata = {
/* SDHI0 */
DEFINE_RES_MEM(0xFFE4C000, 0x100),
DEFINE_RES_IRQ(gic_iid(0x77)),
@@ -365,12 +365,12 @@
platform_device_register_full(&ohci_info);
}
-static struct renesas_intc_irqpin_config irqpin_platform_data = {
+static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
.sense_bitfield_width = 2,
};
-static struct resource irqpin_resources[] = {
+static struct resource irqpin_resources[] __initdata = {
DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
@@ -408,17 +408,25 @@
&irqpin_platform_data, sizeof(irqpin_platform_data));
}
+void __init r8a7778_init_delay(void)
+{
+ shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+}
+
+#ifdef CONFIG_USE_OF
#define INT2SMSKCR0 0x82288 /* 0xfe782288 */
#define INT2SMSKCR1 0x8228c /* 0xfe78228c */
#define INT2NTSR0 0x00018 /* 0xfe700018 */
#define INT2NTSR1 0x0002c /* 0xfe70002c */
-static void __init r8a7778_init_irq_common(void)
+void __init r8a7778_init_irq_dt(void)
{
void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
BUG_ON(!base);
+ irqchip_init();
+
/* route all interrupts to ARM */
__raw_writel(0x73ffffff, base + INT2NTSR0);
__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -430,43 +438,6 @@
iounmap(base);
}
-void __init r8a7778_init_irq(void)
-{
- void __iomem *gic_dist_base;
- void __iomem *gic_cpu_base;
-
- gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE);
- gic_cpu_base = ioremap_nocache(0xfe430000, PAGE_SIZE);
- BUG_ON(!gic_dist_base || !gic_cpu_base);
-
- /* use GIC to handle interrupts */
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
- r8a7778_init_irq_common();
-}
-
-void __init r8a7778_init_delay(void)
-{
- shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-}
-
-#ifdef CONFIG_USE_OF
-void __init r8a7778_init_irq_dt(void)
-{
- irqchip_init();
- r8a7778_init_irq_common();
-}
-
-static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = {
- {},
-};
-
-void __init r8a7778_add_standard_devices_dt(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table,
- r8a7778_auxdata_lookup, NULL);
-}
-
static const char *r8a7778_compat_dt[] __initdata = {
"renesas,r8a7778",
NULL,
@@ -475,7 +446,6 @@
DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
.init_early = r8a7778_init_delay,
.init_irq = r8a7778_init_irq_dt,
- .init_machine = r8a7778_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = r8a7778_compat_dt,
.init_late = r8a7778_init_late,
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 3986877..66d3826 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -665,10 +665,6 @@
shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
}
-static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = {
- {},
-};
-
void __init r8a7779_add_standard_devices_dt(void)
{
/* clocks are setup late during boot in the case of DT */
@@ -676,8 +672,7 @@
platform_add_devices(r8a7779_devices_dt,
ARRAY_SIZE(r8a7779_devices_dt));
- of_platform_populate(NULL, of_default_bus_match_table,
- r8a7779_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *r8a7779_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 28f9475..4c96dad 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -19,12 +19,12 @@
*/
#include <linux/irq.h>
-#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
-#include <linux/serial_sci.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/irq-renesas-irqc.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
@@ -149,6 +149,36 @@
&irqc##idx##_data, \
sizeof(struct renesas_irqc_config))
+static struct resource thermal_resources[] __initdata = {
+ DEFINE_RES_MEM(0xe61f0000, 0x14),
+ DEFINE_RES_MEM(0xe61f0100, 0x38),
+ DEFINE_RES_IRQ(gic_spi(69)),
+};
+
+#define r8a7790_register_thermal() \
+ platform_device_register_simple("rcar_thermal", -1, \
+ thermal_resources, \
+ ARRAY_SIZE(thermal_resources))
+
+static struct sh_timer_config cmt00_platform_data = {
+ .name = "CMT00",
+ .timer_bit = 0,
+ .clockevent_rating = 80,
+};
+
+static struct resource cmt00_resources[] = {
+ DEFINE_RES_MEM(0xffca0510, 0x0c),
+ DEFINE_RES_MEM(0xffca0500, 0x04),
+ DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7790_register_cmt(idx) \
+ platform_device_register_resndata(&platform_bus, "sh_cmt", \
+ idx, cmt##idx##_resources, \
+ ARRAY_SIZE(cmt##idx##_resources), \
+ &cmt##idx##_platform_data, \
+ sizeof(struct sh_timer_config))
+
void __init r8a7790_add_standard_devices(void)
{
r8a7790_register_scif(SCIFA0);
@@ -162,34 +192,91 @@
r8a7790_register_scif(HSCIF0);
r8a7790_register_scif(HSCIF1);
r8a7790_register_irqc(0);
+ r8a7790_register_thermal();
+ r8a7790_register_cmt(00);
}
+#define MODEMR 0xe6160060
+
+u32 __init r8a7790_read_mode_pins(void)
+{
+ void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+ u32 mode;
+
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+
+ return mode;
+}
+
+#define CNTCR 0
+#define CNTFID0 0x20
+
void __init r8a7790_timer_init(void)
{
- void __iomem *cntcr;
+#ifdef CONFIG_ARM_ARCH_TIMER
+ u32 mode = r8a7790_read_mode_pins();
+ void __iomem *base;
+ int extal_mhz = 0;
+ u32 freq;
- /* make sure arch timer is started by setting bit 0 of CNTCT */
- cntcr = ioremap(0xe6080000, PAGE_SIZE);
- iowrite32(1, cntcr);
- iounmap(cntcr);
+ /* At Linux boot time the r8a7790 arch timer comes up
+ * with the counter disabled. Moreover, it may also report
+ * a potentially incorrect fixed 13 MHz frequency. To be
+ * correct these registers need to be updated to use the
+ * frequency EXTAL / 2 which can be determined by the MD pins.
+ */
+
+ switch (mode & (MD(14) | MD(13))) {
+ case 0:
+ extal_mhz = 15;
+ break;
+ case MD(13):
+ extal_mhz = 20;
+ break;
+ case MD(14):
+ extal_mhz = 26;
+ break;
+ case MD(13) | MD(14):
+ extal_mhz = 30;
+ break;
+ }
+
+ /* The arch timer frequency equals EXTAL / 2 */
+ freq = extal_mhz * (1000000 / 2);
+
+ /* Remap "armgcnt address map" space */
+ base = ioremap(0xe6080000, PAGE_SIZE);
+
+ /* Update registers with correct frequency */
+ iowrite32(freq, base + CNTFID0);
+ asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+ /* make sure arch timer is started by setting bit 0 of CNTCR */
+ iowrite32(1, base + CNTCR);
+ iounmap(base);
+#endif /* CONFIG_ARM_ARCH_TIMER */
shmobile_timer_init();
}
-#ifdef CONFIG_USE_OF
-void __init r8a7790_add_standard_devices_dt(void)
+void __init r8a7790_init_delay(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+#ifndef CONFIG_ARM_ARCH_TIMER
+ shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
}
+#ifdef CONFIG_USE_OF
+
static const char *r8a7790_boards_compat_dt[] __initdata = {
"renesas,r8a7790",
NULL,
};
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
- .init_irq = irqchip_init,
- .init_machine = r8a7790_add_standard_devices_dt,
+ .init_early = r8a7790_init_delay,
.init_time = r8a7790_timer_init,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 5502d62..13e6fdb 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1147,10 +1147,6 @@
shmobile_setup_console();
}
-static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
- { }
-};
-
void __init sh7372_add_standard_devices_dt(void)
{
/* clocks are setup late during boot in the case of DT */
@@ -1159,8 +1155,7 @@
platform_add_devices(sh7372_early_devices,
ARRAY_SIZE(sh7372_early_devices));
- of_platform_populate(NULL, of_default_bus_match_table,
- sh7372_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *sh7372_boards_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 96e7ca1..516c239 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -22,7 +22,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/irqchip.h>
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
@@ -61,29 +60,16 @@
iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
}
-static struct resource sh73a0_pfc_resources[] = {
- [0] = {
- .start = 0xe6050000,
- .end = 0xe6057fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0xe605801c,
- .end = 0xe6058027,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device sh73a0_pfc_device = {
- .name = "pfc-sh73a0",
- .id = -1,
- .resource = sh73a0_pfc_resources,
- .num_resources = ARRAY_SIZE(sh73a0_pfc_resources),
+/* PFC */
+static struct resource pfc_resources[] __initdata = {
+ DEFINE_RES_MEM(0xe6050000, 0x8000),
+ DEFINE_RES_MEM(0xe605801c, 0x000c),
};
void __init sh73a0_pinmux_init(void)
{
- platform_device_register(&sh73a0_pfc_device);
+ platform_device_register_simple("pfc-sh73a0", -1, pfc_resources,
+ ARRAY_SIZE(pfc_resources));
}
static struct plat_sci_port scif0_platform_data = {
@@ -958,10 +944,6 @@
#ifdef CONFIG_USE_OF
-static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
- {},
-};
-
void __init sh73a0_add_standard_devices_dt(void)
{
struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, };
@@ -971,8 +953,7 @@
platform_add_devices(sh73a0_devices_dt,
ARRAY_SIZE(sh73a0_devices_dt));
- of_platform_populate(NULL, of_default_bus_match_table,
- sh73a0_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
/* Instantiate cpufreq-cpu0 */
platform_device_register_full(&devinfo);
@@ -988,7 +969,6 @@
.map_io = sh73a0_map_io,
.init_early = sh73a0_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
- .init_irq = irqchip_init,
.init_machine = sh73a0_add_standard_devices_dt,
.dt_compat = sh73a0_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 22a05a8..78e84c5 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -29,6 +29,8 @@
#include <asm/smp_scu.h>
#define EMEV2_SCU_BASE 0x1e000000
+#define EMEV2_SMU_BASE 0xe0110000
+#define SMU_GENERAL_REG0 0x7c0
static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
@@ -38,10 +40,18 @@
static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
{
+ void __iomem *smu;
+
+ /* setup EMEV2 specific SCU base, enable */
+ shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
scu_enable(shmobile_scu_base);
/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
- emev2_set_boot_vector(__pa(shmobile_boot_vector));
+ smu = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
+ if (smu) {
+ iowrite32(__pa(shmobile_boot_vector), smu + SMU_GENERAL_REG0);
+ iounmap(smu);
+ }
shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
shmobile_boot_arg = (unsigned long)shmobile_scu_base;
@@ -49,21 +59,7 @@
scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
}
-static void __init emev2_smp_init_cpus(void)
-{
- unsigned int ncores;
-
- /* setup EMEV2 specific SCU base */
- shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
- emev2_clock_init(); /* need ioremapped SMU */
-
- ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1;
-
- shmobile_smp_init_cpus(ncores);
-}
-
struct smp_operations emev2_smp_ops __initdata = {
- .smp_init_cpus = emev2_smp_init_cpus,
.smp_prepare_cpus = emev2_smp_prepare_cpus,
.smp_boot_secondary = emev2_boot_secondary,
};