powerpc/83xx: add mmc-spi support via the device tree for MPC8323E-RDB
- Add gpio-controller node to manage QE GPIO Bank D;
- Add mmc-spi node;
- Modify board file so that it won't use legacy SPI support with the new
device trees.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index dea3091..4319bd7 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -152,10 +152,21 @@
};
par_io@1400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
reg = <0x1400 0x100>;
+ ranges = <3 0x1448 0x18>;
+ compatible = "fsl,mpc8323-qe-pario";
device_type = "par_io";
num-ports = <7>;
+ qe_pio_d: gpio-controller@1448 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8323-qe-pario-bank";
+ reg = <3 0x18>;
+ gpio-controller;
+ };
+
ucc2pio:ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
@@ -225,12 +236,25 @@
};
spi@4c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x4c0 0x40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
+ gpios = <&qe_pio_d 13 0>;
mode = "cpu-qe";
+
+ mmc-slot@0 {
+ compatible = "fsl,mpc8323rdb-mmc-slot",
+ "mmc-spi-slot";
+ reg = <0>;
+ gpios = <&qe_pio_d 14 1
+ &qe_pio_d 15 0>;
+ voltage-ranges = <3300 3300>;
+ spi-max-frequency = <50000000>;
+ };
};
spi@500 {