diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo b/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo
index d54827d..55e281b0 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-arvo
@@ -6,6 +6,7 @@
 		profile which is also the profile that's active on device startup.
 		When written this attribute activates the selected profile
 		immediately.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/button
 Date:		Januar 2011
@@ -16,6 +17,7 @@
 		button for a specific profile. Button and profile numbers are
 		included in written data. The data has to be 24 bytes long.
 		This file is writeonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/info
 Date:		Januar 2011
@@ -24,6 +26,7 @@
 		installed firmware version.
 		The size of the data is 8 bytes in size.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/key_mask
 Date:		Januar 2011
@@ -36,6 +39,7 @@
 		When read, this file returns the current state of the buttons.
 		When written, the given buttons are activated/deactivated
 		immediately.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/mode_key
 Date:		Januar 2011
@@ -45,4 +49,5 @@
 		the assignment of the number block changes.
 		The integer value of this attribute ranges from 0 (OFF) to 1 (ON).
 		When read, this file returns the actual state of the key.
-		When written, the key is activated/deactivated immediately.
\ No newline at end of file
+		When written, the key is activated/deactivated immediately.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
index 698b808..b4c4f15 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -16,12 +16,14 @@
 		6     3200
 
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/actual_profile
 Date:		March 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	When read, this file returns the number of the actual profile.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/firmware_version
 Date:		March 2010
@@ -32,6 +34,7 @@
 		number the decimal point has to be shifted 2 positions to the
 		left. E.g. a returned value of 138 means 1.38
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/profile[1-5]
 Date:		March 2010
@@ -47,6 +50,7 @@
 		The mouse will reject invalid data, whereas the profile number
 		stored in the profile doesn't need to fit the number of the
 		store.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/settings
 Date:		March 2010
@@ -57,6 +61,7 @@
 		When written, this file lets write settings back to the mouse.
 		The data has to be 36 bytes long. The mouse will reject invalid
 		data.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/startup_profile
 Date:		March 2010
@@ -66,6 +71,7 @@
                 that's active when the mouse is powered on.
 		When written, this file sets the number of the startup profile
 		and the mouse activates this profile immediately.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/tcu
 Date:		March 2010
@@ -77,6 +83,7 @@
 		Writing 0 in this file will switch the TCU off.
 		Writing 1 in this file will start the calibration which takes
 		around 6 seconds to complete and activates the TCU.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/weight
 Date:		March 2010
@@ -96,3 +103,4 @@
 		4     20g
 
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
index 0f9f30e..00efced 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
@@ -4,6 +4,7 @@
 Description:	When read, this file returns the number of the actual profile in
 		range 0-4.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
 Date:		October 2010
@@ -14,6 +15,7 @@
 		number the decimal point has to be shifted 2 positions to the
 		left. E.g. a returned value of 121 means 1.21
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro
 Date:		October 2010
@@ -24,6 +26,7 @@
 		button for a specific profile. Button and profile numbers are
 		included in written data. The data has to be 2082 bytes long.
 		This file is writeonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons
 Date:		August 2010
@@ -37,6 +40,7 @@
 		Which profile to write is determined by the profile number
 		contained in the data.
 		This file is writeonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
 Date:		August 2010
@@ -47,6 +51,7 @@
 		When read, these files return the respective profile buttons.
 		The returned data is 77 bytes in size.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings
 Date:		October 2010
@@ -61,6 +66,7 @@
 		Which profile to write is determined by the profile number
 		contained in the data.
 		This file is writeonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
 Date:		August 2010
@@ -72,6 +78,7 @@
 		When read, these files return the respective profile settings.
 		The returned data is 43 bytes in size.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor
 Date:		October 2010
@@ -80,6 +87,7 @@
 		can be activated/deactivated and the lift-off distance can be
 		set. The data has to be 6 bytes long.
 		This file is writeonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile
 Date:		October 2010
@@ -89,6 +97,7 @@
                 that's active when the mouse is powered on.
 		When written, this file sets the number of the startup profile
 		and the mouse activates this profile immediately.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu
 Date:		October 2010
@@ -97,6 +106,7 @@
 		can be initiated/cancelled.
 		The data has to be 3 bytes long.
 		This file is writeonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image
 Date:		October 2010
@@ -106,3 +116,4 @@
 		calibration process initiated with tcu.
 		The returned data is 1028 bytes in size.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
index 9e54af4..fdfa16f 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus
@@ -5,6 +5,7 @@
 		When read, this attribute returns the number of the active
 		cpi level.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile
 Date:		January 2011
@@ -15,6 +16,7 @@
 		When written, the mouse activates this profile immediately.
 		The profile that's active when powered down is the same that's
 		active when the mouse is powered on.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
 Date:		January 2011
@@ -23,6 +25,7 @@
 		When read, this attribute returns the number of the actual
 		sensitivity in x direction.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y
 Date:		January 2011
@@ -31,6 +34,7 @@
 		When read, this attribute returns the number of the actual
 		sensitivity in y direction.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version
 Date:		January 2011
@@ -41,6 +45,7 @@
 		number the decimal point has to be shifted 2 positions to the
 		left. E.g. a returned value of 121 means 1.21
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons
 Date:		January 2011
@@ -54,6 +59,7 @@
 		Which profile to write is determined by the profile number
 		contained in the data.
 		This file is writeonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
 Date:		January 2011
@@ -64,6 +70,7 @@
 		When read, these files return the respective profile buttons.
 		The returned data is 23 bytes in size.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings
 Date:		January 2011
@@ -78,6 +85,7 @@
 		Which profile to write is determined by the profile number
 		contained in the data.
 		This file is writeonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
 Date:		January 2011
@@ -89,3 +97,4 @@
 		When read, these files return the respective profile settings.
 		The returned data is 16 bytes in size.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
index 1c37b82..5fab71a 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
@@ -13,6 +13,7 @@
 		4     1600
 
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile
 Date:		August 2010
@@ -20,6 +21,7 @@
 Description:	When read, this file returns the number of the actual profile in
 		range 0-4.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version
 Date:		August 2010
@@ -30,6 +32,7 @@
 		number the decimal point has to be shifted 2 positions to the
 		left. E.g. a returned value of 138 means 1.38
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings
 Date:		August 2010
@@ -44,6 +47,7 @@
 		Which profile to write is determined by the profile number
 		contained in the data.
 		This file is writeonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
 Date:		August 2010
@@ -55,6 +59,7 @@
 		When read, these files return the respective profile settings.
 		The returned data is 13 bytes in size.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons
 Date:		August 2010
@@ -68,6 +73,7 @@
 		Which profile to write is determined by the profile number
 		contained in the data.
 		This file is writeonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
 Date:		August 2010
@@ -78,6 +84,7 @@
 		When read, these files return the respective profile buttons.
 		The returned data is 19 bytes in size.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
 Date:		August 2010
@@ -86,6 +93,7 @@
                 When read, this attribute returns the number of the profile
                 that's active when the mouse is powered on.
 		This file is readonly.
+Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings
 Date:		August 2010
@@ -96,3 +104,4 @@
 		When written, this file lets write settings back to the mouse.
 		The data has to be 3 bytes long. The mouse will reject invalid
 		data.
+Users:		http://roccat.sourceforge.net