drivers/leds: add driver for PCA9633 I2C chip
Driver for the PCA9633 I2C chip supporting four LEDs and 255 brightness
levels.
[akpm@linux-foundation.org: fix kcalloc() call]
[axel.lin@gmail.com: fix kcalloc parameters swapped]
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 8c7a75d..e2ac190 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -234,6 +234,14 @@
LED driver chips accessed via the I2C bus. Supported
devices include PCA9550, PCA9551, PCA9552, and PCA9553.
+config LEDS_PCA9633
+ tristate "LED support for PCA9633 I2C chip"
+ depends on LEDS_CLASS
+ depends on I2C
+ help
+ This option enables support for LEDs connected to the PCA9633
+ LED driver chip accessed via the I2C bus.
+
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 6bcf4f6..fa0f428 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -30,6 +30,7 @@
obj-$(CONFIG_LEDS_OT200) += leds-ot200.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
+obj-$(CONFIG_LEDS_PCA9633) += leds-pca9633.o
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
diff --git a/drivers/leds/leds-pca9633.c b/drivers/leds/leds-pca9633.c
new file mode 100644
index 0000000..80cb61a
--- /dev/null
+++ b/drivers/leds/leds-pca9633.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright 2011 bct electronic GmbH
+ *
+ * Author: Peter Meerwald <p.meerwald@bct-electronic.com>
+ *
+ * Based on leds-pca955x.c
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+/* LED select registers determine the source that drives LED outputs */
+#define PCA9633_LED_OFF 0x0 /* LED driver off */
+#define PCA9633_LED_ON 0x1 /* LED driver on */
+#define PCA9633_LED_PWM 0x2 /* Controlled through PWM */
+#define PCA9633_LED_GRP_PWM 0x3 /* Controlled through PWM/GRPPWM */
+
+#define PCA9633_MODE1 0x00
+#define PCA9633_MODE2 0x01
+#define PCA9633_PWM_BASE 0x02
+#define PCA9633_LEDOUT 0x08
+
+static const struct i2c_device_id pca9633_id[] = {
+ { "pca9633", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pca9633_id);
+
+struct pca9633_led {
+ struct i2c_client *client;
+ struct work_struct work;
+ enum led_brightness brightness;
+ struct led_classdev led_cdev;
+ int led_num; /* 0 .. 3 potentially */
+ char name[32];
+};
+
+static void pca9633_led_work(struct work_struct *work)
+{
+ struct pca9633_led *pca9633 = container_of(work,
+ struct pca9633_led, work);
+ u8 ledout = i2c_smbus_read_byte_data(pca9633->client, PCA9633_LEDOUT);
+ int shift = 2 * pca9633->led_num;
+ u8 mask = 0x3 << shift;
+
+ switch (pca9633->brightness) {
+ case LED_FULL:
+ i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
+ (ledout & ~mask) | (PCA9633_LED_ON << shift));
+ break;
+ case LED_OFF:
+ i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
+ ledout & ~mask);
+ break;
+ default:
+ i2c_smbus_write_byte_data(pca9633->client,
+ PCA9633_PWM_BASE + pca9633->led_num,
+ pca9633->brightness);
+ i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
+ (ledout & ~mask) | (PCA9633_LED_PWM << shift));
+ break;
+ }
+}
+
+static void pca9633_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct pca9633_led *pca9633;
+
+ pca9633 = container_of(led_cdev, struct pca9633_led, led_cdev);
+
+ pca9633->brightness = value;
+
+ /*
+ * Must use workqueue for the actual I/O since I2C operations
+ * can sleep.
+ */
+ schedule_work(&pca9633->work);
+}
+
+static int __devinit pca9633_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pca9633_led *pca9633;
+ struct i2c_adapter *adapter;
+ struct led_platform_data *pdata;
+ int i, err;
+
+ adapter = to_i2c_adapter(client->dev.parent);
+ pdata = client->dev.platform_data;
+
+ if (pdata) {
+ if (pdata->num_leds <= 0 || pdata->num_leds > 4) {
+ dev_err(&client->dev, "board info must claim at most 4 LEDs");
+ return -EINVAL;
+ }
+ }
+
+ pca9633 = kcalloc(4, sizeof(*pca9633), GFP_KERNEL);
+ if (!pca9633)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, pca9633);
+
+ for (i = 0; i < 4; i++) {
+ pca9633[i].client = client;
+ pca9633[i].led_num = i;
+
+ /* Platform data can specify LED names and default triggers */
+ if (pdata && i < pdata->num_leds) {
+ if (pdata->leds[i].name)
+ snprintf(pca9633[i].name,
+ sizeof(pca9633[i].name), "pca9633:%s",
+ pdata->leds[i].name);
+ if (pdata->leds[i].default_trigger)
+ pca9633[i].led_cdev.default_trigger =
+ pdata->leds[i].default_trigger;
+ } else {
+ snprintf(pca9633[i].name, sizeof(pca9633[i].name),
+ "pca9633:%d", i);
+ }
+
+ pca9633[i].led_cdev.name = pca9633[i].name;
+ pca9633[i].led_cdev.brightness_set = pca9633_led_set;
+
+ INIT_WORK(&pca9633[i].work, pca9633_led_work);
+
+ err = led_classdev_register(&client->dev, &pca9633[i].led_cdev);
+ if (err < 0)
+ goto exit;
+ }
+
+ /* Disable LED all-call address and set normal mode */
+ i2c_smbus_write_byte_data(client, PCA9633_MODE1, 0x00);
+
+ /* Turn off LEDs */
+ i2c_smbus_write_byte_data(client, PCA9633_LEDOUT, 0x00);
+
+ return 0;
+
+exit:
+ while (i--) {
+ led_classdev_unregister(&pca9633[i].led_cdev);
+ cancel_work_sync(&pca9633[i].work);
+ }
+
+ kfree(pca9633);
+
+ return err;
+}
+
+static int __devexit pca9633_remove(struct i2c_client *client)
+{
+ struct pca9633_led *pca9633 = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ led_classdev_unregister(&pca9633[i].led_cdev);
+ cancel_work_sync(&pca9633[i].work);
+ }
+
+ kfree(pca9633);
+
+ return 0;
+}
+
+static struct i2c_driver pca9633_driver = {
+ .driver = {
+ .name = "leds-pca9633",
+ .owner = THIS_MODULE,
+ },
+ .probe = pca9633_probe,
+ .remove = __devexit_p(pca9633_remove),
+ .id_table = pca9633_id,
+};
+
+module_i2c_driver(pca9633_driver);
+
+MODULE_AUTHOR("Peter Meerwald <p.meerwald@bct-electronic.com>");
+MODULE_DESCRIPTION("PCA9633 LED driver");
+MODULE_LICENSE("GPL v2");