Bluetooth: btbcm: Add helper functions for UART setup
Firmware loading may reset the controller UART speed and needs to set
host UART speed back to init speed.
UART drivers setup is split in 3 parts:
- btbcm_initialize() resets the controller and returns the firmware
name based on controller revision and sub_version.
- btbtcm_patchram() (already existing and public), which takes the
firmware name as parameter, requests the firmware and loads it to
the controller.
- btbcm_finalize() which resets the controller, reads local version
and checks if the controller address is a default one or not.
Remove firmware name retrieval for UART controllers from
btbcm_setup_patchram().
Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 14e4647..8e2f6b6 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -246,6 +246,95 @@
{ }
};
+int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len)
+{
+ u16 subver, rev;
+ const char *hw_name = NULL;
+ struct sk_buff *skb;
+ struct hci_rp_read_local_version *ver;
+ int i, err;
+
+ /* Reset */
+ err = btbcm_reset(hdev);
+ if (err)
+ return err;
+
+ /* Read Local Version Info */
+ skb = btbcm_read_local_version(hdev);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ ver = (struct hci_rp_read_local_version *)skb->data;
+ rev = le16_to_cpu(ver->hci_rev);
+ subver = le16_to_cpu(ver->lmp_subver);
+ kfree_skb(skb);
+
+ /* Read Verbose Config Version Info */
+ skb = btbcm_read_verbose_config(hdev);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
+ kfree_skb(skb);
+
+ switch ((rev & 0xf000) >> 12) {
+ case 0:
+ case 3:
+ for (i = 0; bcm_uart_subver_table[i].name; i++) {
+ if (subver == bcm_uart_subver_table[i].subver) {
+ hw_name = bcm_uart_subver_table[i].name;
+ break;
+ }
+ }
+
+ snprintf(fw_name, len, "brcm/%s.hcd", hw_name ? : "BCM");
+ break;
+ default:
+ return 0;
+ }
+
+ BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+ hw_name ? : "BCM", (subver & 0x7000) >> 13,
+ (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_initialize);
+
+int btbcm_finalize(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ struct hci_rp_read_local_version *ver;
+ u16 subver, rev;
+ int err;
+
+ /* Reset */
+ err = btbcm_reset(hdev);
+ if (err)
+ return err;
+
+ /* Read Local Version Info */
+ skb = btbcm_read_local_version(hdev);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ ver = (struct hci_rp_read_local_version *)skb->data;
+ rev = le16_to_cpu(ver->hci_rev);
+ subver = le16_to_cpu(ver->lmp_subver);
+ kfree_skb(skb);
+
+ BT_INFO("%s: BCM (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+ (subver & 0x7000) >> 13, (subver & 0x1f00) >> 8,
+ (subver & 0x00ff), rev & 0x0fff);
+
+ btbcm_check_bdaddr(hdev);
+
+ set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_finalize);
+
static const struct {
u16 subver;
const char *name;