drivers/pwm/pwm-imx.c - kernel/msm-4.9 - Gitiles

 /*
  * simple driver for PWM (Pulse Width Modulator) controller
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
  */

 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
 #include <linux/of_device.h>

 /* i.MX1 and i.MX21 share the same PWM function block: */

 #define MX1_PWMC    0x00   /* PWM Control Register */
 #define MX1_PWMS    0x04   /* PWM Sample Register */
 #define MX1_PWMP    0x08   /* PWM Period Register */

 #define MX1_PWMC_EN		(1 << 4)

 /* i.MX27, i.MX31, i.MX35 share the same PWM function block: */

 #define MX3_PWMCR                 0x00    /* PWM Control Register */
 #define MX3_PWMSAR                0x0C    /* PWM Sample Register */
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
 #define MX3_PWMCR_DOZEEN                (1 << 24)
 #define MX3_PWMCR_WAITEN                (1 << 23)
 #define MX3_PWMCR_DBGEN			(1 << 22)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
 #define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)

 struct imx_chip {
 	struct clk	*clk_per;
 	struct clk	*clk_ipg;

 	void __iomem	*mmio_base;

 	struct pwm_chip	chip;

 	int (*config)(struct pwm_chip *chip,
 		struct pwm_device *pwm, int duty_ns, int period_ns);
 	void (*set_enable)(struct pwm_chip *chip, bool enable);
 };

 #define to_imx_chip(chip)	container_of(chip, struct imx_chip, chip)

 static int imx_pwm_config_v1(struct pwm_chip *chip,
 		struct pwm_device *pwm, int duty_ns, int period_ns)
 {
 	struct imx_chip *imx = to_imx_chip(chip);

 	/*
 	 * The PWM subsystem allows for exact frequencies. However,
 	 * I cannot connect a scope on my device to the PWM line and
 	 * thus cannot provide the program the PWM controller
 	 * exactly. Instead, I'm relying on the fact that the
 	 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
 	 * function group already. So I'll just modify the PWM sample
 	 * register to follow the ratio of duty_ns vs. period_ns
 	 * accordingly.
 	 *
 	 * This is good enough for programming the brightness of
 	 * the LCD backlight.
 	 *
 	 * The real implementation would divide PERCLK[0] first by
 	 * both the prescaler (/1 .. /128) and then by CLKSEL
 	 * (/2 .. /16).
 	 */
 	u32 max = readl(imx->mmio_base + MX1_PWMP);
 	u32 p = max * duty_ns / period_ns;
 	writel(max - p, imx->mmio_base + MX1_PWMS);

 	return 0;
 }

 static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 	u32 val;

 	val = readl(imx->mmio_base + MX1_PWMC);

 	if (enable)
 		val |= MX1_PWMC_EN;
 	else
 		val &= ~MX1_PWMC_EN;

 	writel(val, imx->mmio_base + MX1_PWMC);
 }

 static int imx_pwm_config_v2(struct pwm_chip *chip,
 		struct pwm_device *pwm, int duty_ns, int period_ns)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 	unsigned long long c;
 	unsigned long period_cycles, duty_cycles, prescale;
 	u32 cr;

 	c = clk_get_rate(imx->clk_per);
 	c = c * period_ns;
 	do_div(c, 1000000000);
 	period_cycles = c;

 	prescale = period_cycles / 0x10000 + 1;

 	period_cycles /= prescale;
 	c = (unsigned long long)period_cycles * duty_ns;
 	do_div(c, period_ns);
 	duty_cycles = c;

 	/*
 	 * according to imx pwm RM, the real period value should be
 	 * PERIOD value in PWMPR plus 2.
 	 */
 	if (period_cycles > 2)
 		period_cycles -= 2;
 	else
 		period_cycles = 0;

 	writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
 	writel(period_cycles, imx->mmio_base + MX3_PWMPR);

 	cr = MX3_PWMCR_PRESCALER(prescale) |
 		MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
 		MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;

 	if (test_bit(PWMF_ENABLED, &pwm->flags))
 		cr |= MX3_PWMCR_EN;

 	writel(cr, imx->mmio_base + MX3_PWMCR);

 	return 0;
 }

 static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 	u32 val;

 	val = readl(imx->mmio_base + MX3_PWMCR);

 	if (enable)
 		val |= MX3_PWMCR_EN;
 	else
 		val &= ~MX3_PWMCR_EN;

 	writel(val, imx->mmio_base + MX3_PWMCR);
 }

 static int imx_pwm_config(struct pwm_chip *chip,
 		struct pwm_device *pwm, int duty_ns, int period_ns)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 	int ret;

 	ret = clk_prepare_enable(imx->clk_ipg);
 	if (ret)
 		return ret;

 	ret = imx->config(chip, pwm, duty_ns, period_ns);

 	clk_disable_unprepare(imx->clk_ipg);

 	return ret;
 }

 static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct imx_chip *imx = to_imx_chip(chip);
 	int ret;

 	ret = clk_prepare_enable(imx->clk_per);
 	if (ret)
 		return ret;

 	imx->set_enable(chip, true);

 	return 0;
 }

 static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct imx_chip *imx = to_imx_chip(chip);

 	imx->set_enable(chip, false);

 	clk_disable_unprepare(imx->clk_per);
 }

 static struct pwm_ops imx_pwm_ops = {
 	.enable = imx_pwm_enable,
 	.disable = imx_pwm_disable,
 	.config = imx_pwm_config,
 	.owner = THIS_MODULE,
 };

 struct imx_pwm_data {
 	int (*config)(struct pwm_chip *chip,
 		struct pwm_device *pwm, int duty_ns, int period_ns);
 	void (*set_enable)(struct pwm_chip *chip, bool enable);
 };

 static struct imx_pwm_data imx_pwm_data_v1 = {
 	.config = imx_pwm_config_v1,
 	.set_enable = imx_pwm_set_enable_v1,
 };

 static struct imx_pwm_data imx_pwm_data_v2 = {
 	.config = imx_pwm_config_v2,
 	.set_enable = imx_pwm_set_enable_v2,
 };

 static const struct of_device_id imx_pwm_dt_ids[] = {
 	{ .compatible = "fsl,imx1-pwm", .data = &imx_pwm_data_v1, },
 	{ .compatible = "fsl,imx27-pwm", .data = &imx_pwm_data_v2, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids);

 static int imx_pwm_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id =
 			of_match_device(imx_pwm_dt_ids, &pdev->dev);
 	const struct imx_pwm_data *data;
 	struct imx_chip *imx;
 	struct resource *r;
 	int ret = 0;

 	if (!of_id)
 		return -ENODEV;

 	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
 	if (imx == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
 		return -ENOMEM;
 	}

 	imx->clk_per = devm_clk_get(&pdev->dev, "per");
 	if (IS_ERR(imx->clk_per)) {
 		dev_err(&pdev->dev, "getting per clock failed with %ld\n",
 				PTR_ERR(imx->clk_per));
 		return PTR_ERR(imx->clk_per);
 	}

 	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
 	if (IS_ERR(imx->clk_ipg)) {
 		dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
 				PTR_ERR(imx->clk_ipg));
 		return PTR_ERR(imx->clk_ipg);
 	}

 	imx->chip.ops = &imx_pwm_ops;
 	imx->chip.dev = &pdev->dev;
 	imx->chip.base = -1;
 	imx->chip.npwm = 1;

 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
 		return -ENODEV;
 	}

 	imx->mmio_base = devm_ioremap_resource(&pdev->dev, r);
 	if (IS_ERR(imx->mmio_base))
 		return PTR_ERR(imx->mmio_base);

 	data = of_id->data;
 	imx->config = data->config;
 	imx->set_enable = data->set_enable;

 	ret = pwmchip_add(&imx->chip);
 	if (ret < 0)
 		return ret;

 	platform_set_drvdata(pdev, imx);
 	return 0;
 }

 static int imx_pwm_remove(struct platform_device *pdev)
 {
 	struct imx_chip *imx;

 	imx = platform_get_drvdata(pdev);
 	if (imx == NULL)
 		return -ENODEV;

 	return pwmchip_remove(&imx->chip);
 }

 static struct platform_driver imx_pwm_driver = {
 	.driver		= {
 		.name	= "imx-pwm",
 		.of_match_table = of_match_ptr(imx_pwm_dt_ids),
 	},
 	.probe		= imx_pwm_probe,
 	.remove		= imx_pwm_remove,
 };

 module_platform_driver(imx_pwm_driver);

 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
	/*
	* simple driver for PWM (Pulse Width Modulator) controller
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
	*/

	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/platform_device.h>
	#include <linux/slab.h>
	#include <linux/err.h>
	#include <linux/clk.h>
	#include <linux/io.h>
	#include <linux/pwm.h>
	#include <linux/of_device.h>

	/* i.MX1 and i.MX21 share the same PWM function block: */

	#define MX1_PWMC 0x00 /* PWM Control Register */
	#define MX1_PWMS 0x04 /* PWM Sample Register */
	#define MX1_PWMP 0x08 /* PWM Period Register */

	#define MX1_PWMC_EN (1 << 4)

	/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */

	#define MX3_PWMCR 0x00 /* PWM Control Register */
	#define MX3_PWMSAR 0x0C /* PWM Sample Register */
	#define MX3_PWMPR 0x10 /* PWM Period Register */
	#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
	#define MX3_PWMCR_DOZEEN (1 << 24)
	#define MX3_PWMCR_WAITEN (1 << 23)
	#define MX3_PWMCR_DBGEN (1 << 22)
	#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
	#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
	#define MX3_PWMCR_EN (1 << 0)

	struct imx_chip {
	struct clk *clk_per;
	struct clk *clk_ipg;

	void __iomem *mmio_base;

	struct pwm_chip chip;

	int (config)(struct pwm_chip chip,
	struct pwm_device *pwm, int duty_ns, int period_ns);
	void (set_enable)(struct pwm_chip chip, bool enable);
	};

	#define to_imx_chip(chip) container_of(chip, struct imx_chip, chip)

	static int imx_pwm_config_v1(struct pwm_chip *chip,
	struct pwm_device *pwm, int duty_ns, int period_ns)
	{
	struct imx_chip *imx = to_imx_chip(chip);

	/*
	* The PWM subsystem allows for exact frequencies. However,
	* I cannot connect a scope on my device to the PWM line and
	* thus cannot provide the program the PWM controller
	* exactly. Instead, I'm relying on the fact that the
	* Bootloader (u-boot or WinCE+haret) has programmed the PWM
	* function group already. So I'll just modify the PWM sample
	* register to follow the ratio of duty_ns vs. period_ns
	* accordingly.
	*
	* This is good enough for programming the brightness of
	* the LCD backlight.
	*
	* The real implementation would divide PERCLK[0] first by
	* both the prescaler (/1 .. /128) and then by CLKSEL
	* (/2 .. /16).
	*/
	u32 max = readl(imx->mmio_base + MX1_PWMP);
	u32 p = max * duty_ns / period_ns;
	writel(max - p, imx->mmio_base + MX1_PWMS);

	return 0;
	}

	static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
	{
	struct imx_chip *imx = to_imx_chip(chip);
	u32 val;

	val = readl(imx->mmio_base + MX1_PWMC);

	if (enable)
	val \|= MX1_PWMC_EN;
	else
	val &= ~MX1_PWMC_EN;

	writel(val, imx->mmio_base + MX1_PWMC);
	}

	static int imx_pwm_config_v2(struct pwm_chip *chip,
	struct pwm_device *pwm, int duty_ns, int period_ns)
	{
	struct imx_chip *imx = to_imx_chip(chip);
	unsigned long long c;
	unsigned long period_cycles, duty_cycles, prescale;
	u32 cr;

	c = clk_get_rate(imx->clk_per);
	c = c * period_ns;
	do_div(c, 1000000000);
	period_cycles = c;

	prescale = period_cycles / 0x10000 + 1;

	period_cycles /= prescale;
	c = (unsigned long long)period_cycles * duty_ns;
	do_div(c, period_ns);
	duty_cycles = c;

	/*
	* according to imx pwm RM, the real period value should be
	* PERIOD value in PWMPR plus 2.
	*/
	if (period_cycles > 2)
	period_cycles -= 2;
	else
	period_cycles = 0;

	writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
	writel(period_cycles, imx->mmio_base + MX3_PWMPR);

	cr = MX3_PWMCR_PRESCALER(prescale) \|
	MX3_PWMCR_DOZEEN \| MX3_PWMCR_WAITEN \|
	MX3_PWMCR_DBGEN \| MX3_PWMCR_CLKSRC_IPG_HIGH;

	if (test_bit(PWMF_ENABLED, &pwm->flags))
	cr \|= MX3_PWMCR_EN;

	writel(cr, imx->mmio_base + MX3_PWMCR);

	return 0;
	}

	static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
	{
	struct imx_chip *imx = to_imx_chip(chip);
	u32 val;

	val = readl(imx->mmio_base + MX3_PWMCR);

	if (enable)
	val \|= MX3_PWMCR_EN;
	else
	val &= ~MX3_PWMCR_EN;

	writel(val, imx->mmio_base + MX3_PWMCR);
	}

	static int imx_pwm_config(struct pwm_chip *chip,
	struct pwm_device *pwm, int duty_ns, int period_ns)
	{
	struct imx_chip *imx = to_imx_chip(chip);
	int ret;

	ret = clk_prepare_enable(imx->clk_ipg);
	if (ret)
	return ret;

	ret = imx->config(chip, pwm, duty_ns, period_ns);

	clk_disable_unprepare(imx->clk_ipg);

	return ret;
	}

	static int imx_pwm_enable(struct pwm_chip chip, struct pwm_device pwm)
	{
	struct imx_chip *imx = to_imx_chip(chip);
	int ret;

	ret = clk_prepare_enable(imx->clk_per);
	if (ret)
	return ret;

	imx->set_enable(chip, true);

	return 0;
	}

	static void imx_pwm_disable(struct pwm_chip chip, struct pwm_device pwm)
	{
	struct imx_chip *imx = to_imx_chip(chip);

	imx->set_enable(chip, false);

	clk_disable_unprepare(imx->clk_per);
	}

	static struct pwm_ops imx_pwm_ops = {
	.enable = imx_pwm_enable,
	.disable = imx_pwm_disable,
	.config = imx_pwm_config,
	.owner = THIS_MODULE,
	};

	struct imx_pwm_data {
	int (config)(struct pwm_chip chip,
	struct pwm_device *pwm, int duty_ns, int period_ns);
	void (set_enable)(struct pwm_chip chip, bool enable);
	};

	static struct imx_pwm_data imx_pwm_data_v1 = {
	.config = imx_pwm_config_v1,
	.set_enable = imx_pwm_set_enable_v1,
	};

	static struct imx_pwm_data imx_pwm_data_v2 = {
	.config = imx_pwm_config_v2,
	.set_enable = imx_pwm_set_enable_v2,
	};

	static const struct of_device_id imx_pwm_dt_ids[] = {
	{ .compatible = "fsl,imx1-pwm", .data = &imx_pwm_data_v1, },
	{ .compatible = "fsl,imx27-pwm", .data = &imx_pwm_data_v2, },
	{ /* sentinel */ }
	};
	MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids);

	static int imx_pwm_probe(struct platform_device *pdev)
	{
	const struct of_device_id *of_id =
	of_match_device(imx_pwm_dt_ids, &pdev->dev);
	const struct imx_pwm_data *data;
	struct imx_chip *imx;
	struct resource *r;
	int ret = 0;

	if (!of_id)
	return -ENODEV;

	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
	if (imx == NULL) {
	dev_err(&pdev->dev, "failed to allocate memory\n");
	return -ENOMEM;
	}

	imx->clk_per = devm_clk_get(&pdev->dev, "per");
	if (IS_ERR(imx->clk_per)) {
	dev_err(&pdev->dev, "getting per clock failed with %ld\n",
	PTR_ERR(imx->clk_per));
	return PTR_ERR(imx->clk_per);
	}

	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
	if (IS_ERR(imx->clk_ipg)) {
	dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
	PTR_ERR(imx->clk_ipg));
	return PTR_ERR(imx->clk_ipg);
	}

	imx->chip.ops = &imx_pwm_ops;
	imx->chip.dev = &pdev->dev;
	imx->chip.base = -1;
	imx->chip.npwm = 1;

	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (r == NULL) {
	dev_err(&pdev->dev, "no memory resource defined\n");
	return -ENODEV;
	}

	imx->mmio_base = devm_ioremap_resource(&pdev->dev, r);
	if (IS_ERR(imx->mmio_base))
	return PTR_ERR(imx->mmio_base);

	data = of_id->data;
	imx->config = data->config;
	imx->set_enable = data->set_enable;

	ret = pwmchip_add(&imx->chip);
	if (ret < 0)
	return ret;

	platform_set_drvdata(pdev, imx);
	return 0;
	}

	static int imx_pwm_remove(struct platform_device *pdev)
	{
	struct imx_chip *imx;

	imx = platform_get_drvdata(pdev);
	if (imx == NULL)
	return -ENODEV;

	return pwmchip_remove(&imx->chip);
	}

	static struct platform_driver imx_pwm_driver = {
	.driver = {
	.name = "imx-pwm",
	.of_match_table = of_match_ptr(imx_pwm_dt_ids),
	},
	.probe = imx_pwm_probe,
	.remove = imx_pwm_remove,
	};

	module_platform_driver(imx_pwm_driver);

	MODULE_LICENSE("GPL v2");
	MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");