Merge tag 'at91-dt3' of git://github.com/at91linux/linux-at91 into next/dt
3.16 third DT series:
- move of both at91sam9n12 and at91sam9x5 to CCF
* tag 'at91-dt3' of git://github.com/at91linux/linux-at91:
ARM: at91: move sam9n12 SoC to the CCF
ARM: at91/dt: define sam9n12ek crystal frequencies
ARM: at91/dt: define sam9n12 clocks
ARM: at91: prepare common clk transition for sam9n12 SoC
ARM: at91: move sam9x5 SoCs to the CCF
ARM: at91/dt: define sam9x5ek's crystal frequencies
ARM: at91/dt: define sam9x5 clocks
ARM: at91: prepare common clk transition for sam9x5 SoCs
dt-bindings: clock: Move at91.h to dt-bindigs/clock
ARM: at91: fix spi cs on sama5d3 Xplained board
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt
new file mode 100644
index 0000000..4a0a4f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt
@@ -0,0 +1,38 @@
+Samsung Exynos SYSRAM for SMP bringup:
+------------------------------------
+
+Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup
+of the secondary cores. Once the core gets powered up it executes the
+code that is residing at some specific location of the SYSRAM.
+
+Therefore reserved section sub-nodes have to be added to the mmio-sram
+declaration. These nodes are of two types depending upon secure or
+non-secure execution environment.
+
+Required sub-node properties:
+- compatible : depending upon boot mode, should be
+ "samsung,exynos4210-sysram" : for Secure SYSRAM
+ "samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sysram.txt
+
+Example:
+
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x54000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x54000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@53000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x53000 0x1000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
new file mode 100644
index 0000000..857f126
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -0,0 +1,10 @@
+Rockchip platforms device tree bindings
+---------------------------------------
+
+- bq Curie 2 tablet:
+ Required root node properties:
+ - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
+
+- Radxa Rock board:
+ Required root node properties:
+ - compatible = "radxa,rock", "rockchip,rk3188";
diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
index 5dfd145..f72e80e 100644
--- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt
+++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
@@ -21,8 +21,8 @@
- fixed-divider : If clocks have a fixed divider value, use this property.
- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
and the bit index.
-- div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift,
- and width.
+- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains
+ the divider register, bit shift, and width.
- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
similarity index 85%
rename from Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt
rename to Documentation/devicetree/bindings/reset/socfpga-reset.txt
index ecdb57d..32c1c8b 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt
+++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
@@ -3,9 +3,11 @@
Required properties:
- compatible : "altr,rst-mgr"
- reg : Should contain 1 register ranges(address and length)
+- #reset-cells: 1
Example:
rstmgr@ffd05000 {
+ #reset-cells = <1>;
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x1000>;
};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index abc3080..15772f3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -79,6 +79,7 @@
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
mpl MPL AG
+mundoreader Mundo Reader S.L.
mxicy Macronix International Co., Ltd.
national National Semiconductor
neonode Neonode Inc.
@@ -98,6 +99,7 @@
qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc
qnap QNAP Systems, Inc.
+radxa Radxa
raidsonic RaidSonic Technology GmbH
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
@@ -123,6 +125,7 @@
synology Synology, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
+toradex Toradex AG
toshiba Toshiba Corporation
toumaz Toumaz
usi Universal Scientifc Industrial Co., Ltd.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c1fbbf..2bb6bce 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -843,6 +843,7 @@
select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_MEMORY_H
select SPARSE_IRQ
+ select SRAM
select USE_OF
help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 377b7c3..e095bd2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -73,6 +73,7 @@
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5420-arndale-octa.dtb \
+ exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb
@@ -157,10 +158,12 @@
imx27-phytec-phycard-s-rdk.dtb \
imx31-bug.dtb \
imx35-eukrea-mbimxsd35-baseboard.dtb \
+ imx35-pdk.dtb \
imx50-evk.dtb \
imx51-apf51.dtb \
imx51-apf51dev.dtb \
imx51-babbage.dtb \
+ imx51-digi-connectcore-jsk.dtb \
imx51-eukrea-mbimxsd51-baseboard.dtb \
imx53-ard.dtb \
imx53-m53evk.dtb \
@@ -179,6 +182,8 @@
imx6dl-gw54xx.dtb \
imx6dl-hummingboard.dtb \
imx6dl-nitrogen6x.dtb \
+ imx6dl-phytec-pbab01.dtb \
+ imx6dl-riotboard.dtb \
imx6dl-sabreauto.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
@@ -203,6 +208,7 @@
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6sl-evk.dtb \
+ vf610-colibri.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
@@ -315,11 +321,13 @@
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r7s72100-genmai-reference.dtb \
+ r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
+ socfpga_cyclone5_socrates.dtb \
socfpga_vt.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
spear1340-evb.dtb
@@ -328,10 +336,12 @@
spear320-evb.dtb \
spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
- stih416-b2000.dtb \
+dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
+ stih415-b2000.dtb \
stih415-b2020.dtb \
- stih416-b2020.dtb
+ stih416-b2000.dtb \
+ stih416-b2020.dtb \
+ stih416-b2020-revE.dtb
dtb-$(CONFIG_ARCH_SUNXI) += \
sun4i-a10-a1000.dtb \
sun4i-a10-cubieboard.dtb \
@@ -341,9 +351,12 @@
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb \
sun5i-a10s-olinuxino-micro.dtb \
+ sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
+ sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
+ sun6i-a31-m9.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-olinuxino-micro.dtb
@@ -360,7 +373,11 @@
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
+ tegra30-colibri-eval-v3.dtb \
tegra114-dalmore.dtb \
+ tegra114-roth.dtb \
+ tegra114-tn7.dtb \
+ tegra124-jetson-tk1.dtb \
tegra124-venice2.dtb
dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 82f238a..ba1a431 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -35,7 +35,6 @@
internal-regs {
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
sata@a0000 {
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 2354fe0..097df7d8 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -47,7 +47,6 @@
internal-regs {
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
timer@20300 {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 651aeb5..d6d572e 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -50,7 +50,6 @@
internal-regs {
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 4e27587..c5fe8b5 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -50,7 +50,6 @@
internal-regs {
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 3e2c857..4169f40 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -51,7 +51,6 @@
internal-regs {
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
sata@a0000 {
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index bb77970..23227e0 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -157,6 +157,7 @@
reg-shift = <2>;
interrupts = <41>;
reg-io-width = <1>;
+ clocks = <&coreclk 0>;
status = "disabled";
};
serial@12100 {
@@ -165,6 +166,7 @@
reg-shift = <2>;
interrupts = <42>;
reg-io-width = <1>;
+ clocks = <&coreclk 0>;
status = "disabled";
};
@@ -203,6 +205,11 @@
reg = <0x20300 0x34>, <0x20704 0x4>;
};
+ pmsu@22000 {
+ compatible = "marvell,armada-370-pmsu";
+ reg = <0x22000 0x1000>;
+ };
+
usb@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x500>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index af1f11e..21b588b 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -220,6 +220,11 @@
clocks = <&coreclk 2>;
};
+ cpurst@20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x8>;
+ };
+
audio_controller: audio-controller@30000 {
compatible = "marvell,armada370-audio";
reg = <0x30000 0x4000>;
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 9378d31..2f26b96 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -68,7 +68,6 @@
};
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 3877693..3b6de4c 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -39,6 +39,8 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "marvell,armada-375-smp";
+
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
@@ -128,6 +130,11 @@
cache-level = <2>;
};
+ scu@c000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xc000 0x58>;
+ };
+
timer@c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
@@ -194,6 +201,7 @@
reg-shift = <2>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
+ clocks = <&coreclk 0>;
status = "disabled";
};
@@ -203,6 +211,7 @@
reg-shift = <2>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
+ clocks = <&coreclk 0>;
status = "disabled";
};
@@ -320,6 +329,22 @@
clocks = <&coreclk 0>;
};
+ watchdog@20300 {
+ compatible = "marvell,armada-375-wdt";
+ reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
+ clocks = <&coreclk 0>;
+ };
+
+ cpurst@20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x10>;
+ };
+
+ coherency-fabric@21010 {
+ compatible = "marvell,armada-375-coherency-fabric";
+ reg = <0x21010 0x1c>;
+ };
+
xor@60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
@@ -391,6 +416,12 @@
status = "disabled";
};
+ thermal@e8078 {
+ compatible = "marvell,armada375-thermal";
+ reg = <0xe8078 0x4>, <0xe807c 0x8>;
+ status = "okay";
+ };
+
coreclk: mvebu-sar@e8204 {
compatible = "marvell,armada-375-core-clock";
reg = <0xe8204 0x04>;
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index 068031f..aa71718 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -21,6 +21,8 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "marvell,armada-380-smp";
+
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index 6828d77..7fcbc0d 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -55,7 +55,6 @@
};
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
@@ -81,6 +80,14 @@
};
};
+ sata@a8000 {
+ status = "okay";
+ };
+
+ sata@e0000 {
+ status = "okay";
+ };
+
flash@d0000 {
status = "okay";
num-cs = <1>;
@@ -101,6 +108,14 @@
reg = <0x1000000 0x3f000000>;
};
};
+
+ sdhci@d8000 {
+ clock-frequency = <200000000>;
+ broken-cd;
+ wp-inverted;
+ bus-width = <8>;
+ status = "okay";
+ };
};
pcie-controller {
diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts
index 45250c8..4b39bed 100644
--- a/arch/arm/boot/dts/armada-385-rd.dts
+++ b/arch/arm/boot/dts/armada-385-rd.dts
@@ -51,7 +51,6 @@
};
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index e2919f0..2c7990d 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -21,6 +21,8 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "marvell,armada-380-smp";
+
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index ca8813b..6ee59a3 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -108,6 +108,11 @@
cache-level = <2>;
};
+ scu@c000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xc000 0x58>;
+ };
+
timer@c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
@@ -174,6 +179,7 @@
reg-shift = <2>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
+ clocks = <&coreclk 0>;
status = "disabled";
};
@@ -183,6 +189,7 @@
reg-shift = <2>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
+ clocks = <&coreclk 0>;
status = "disabled";
};
@@ -267,6 +274,28 @@
clock-names = "nbclk", "fixed";
};
+ watchdog@20300 {
+ compatible = "marvell,armada-380-wdt";
+ reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+ };
+
+ cpurst@20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x10>;
+ };
+
+ coherency-fabric@21010 {
+ compatible = "marvell,armada-380-coherency-fabric";
+ reg = <0x21010 0x1c>;
+ };
+
+ pmsu@22000 {
+ compatible = "marvell,armada-380-pmsu";
+ reg = <0x22000 0x1000>;
+ };
+
eth1: ethernet@30000 {
compatible = "marvell,armada-370-neta";
reg = <0x30000 0x4000>;
@@ -339,6 +368,22 @@
clocks = <&gateclk 4>;
};
+ sata@a8000 {
+ compatible = "marvell,armada-380-ahci";
+ reg = <0xa8000 0x2000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 15>;
+ status = "disabled";
+ };
+
+ sata@e0000 {
+ compatible = "marvell,armada-380-ahci";
+ reg = <0xe0000 0x2000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 30>;
+ status = "disabled";
+ };
+
coredivclk: clock@e4250 {
compatible = "marvell,armada-380-corediv-clock";
reg = <0xe4250 0xc>;
@@ -347,6 +392,12 @@
clock-output-names = "nand";
};
+ thermal@e8078 {
+ compatible = "marvell,armada380-thermal";
+ reg = <0xe4078 0x4>, <0xe4074 0x4>;
+ status = "okay";
+ };
+
flash@d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
@@ -356,6 +407,15 @@
clocks = <&coredivclk 0>;
status = "disabled";
};
+
+ sdhci@d8000 {
+ compatible = "marvell,armada-380-sdhci";
+ reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+ interrupts = <0 25 0x4>;
+ clocks = <&gateclk 17>;
+ mrvl,clk-delay-cycles = <0x1F>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index d83d7d6..a55a97a 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -95,12 +95,10 @@
};
serial@12000 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12100 {
- clock-frequency = <250000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 448373c..2b598ef 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -106,19 +106,15 @@
internal-regs {
serial@12000 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12100 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12200 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12300 {
- clock-frequency = <250000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 61bda68..eb0013f 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -104,19 +104,15 @@
internal-regs {
serial@12000 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12100 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12200 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12300 {
- clock-frequency = <250000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index c224274..25674fe 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -37,19 +37,15 @@
internal-regs {
serial@12000 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12100 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12200 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12300 {
- clock-frequency = <250000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 98335fb..1257ff1 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -27,6 +27,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "marvell,armada-xp-smp";
cpu@0 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 9480cf8..3396b25 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -29,6 +29,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "marvell,armada-xp-smp";
cpu@0 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 31ba6d8..6da84bf 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -30,6 +30,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "marvell,armada-xp-smp";
cpu@0 {
device_type = "cpu";
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index ff049ee..0cf999a 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -138,7 +138,6 @@
};
serial@12000 {
- clocks = <&coreclk 0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 985948c..cf26d13 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -72,11 +72,9 @@
internal-regs {
serial@12000 {
- clock-frequency = <250000000>;
status = "okay";
};
serial@12100 {
- clock-frequency = <250000000>;
status = "okay";
};
pinctrl {
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index abb9f9d..5902e83 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -58,6 +58,7 @@
reg-shift = <2>;
interrupts = <43>;
reg-io-width = <1>;
+ clocks = <&coreclk 0>;
status = "disabled";
};
serial@12300 {
@@ -66,6 +67,7 @@
reg-shift = <2>;
interrupts = <44>;
reg-io-width = <1>;
+ clocks = <&coreclk 0>;
status = "disabled";
};
@@ -117,9 +119,9 @@
clock-names = "nbclk", "fixed";
};
- armada-370-xp-pmsu@22000 {
- compatible = "marvell,armada-370-xp-pmsu";
- reg = <0x22100 0x400>, <0x20800 0x20>;
+ cpurst@20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x20>;
};
eth2: ethernet@30000 {
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 099111b..5b8e404 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -51,11 +51,54 @@
};
i2c0: i2c@f0014000 {
+ pinctrl-0 = <&pinctrl_i2c0_pu>;
status = "okay";
};
i2c1: i2c@f0018000 {
status = "okay";
+
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ status = "okay";
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddfuse_reg: LDO_REG1 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ vddana_reg: LDO_REG2 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
};
macb0: ethernet@f0028000 {
@@ -63,6 +106,12 @@
status = "okay";
};
+ pwm0: pwm@f002c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
+ status = "okay";
+ };
+
usart0: serial@f001c000 {
status = "okay";
};
@@ -110,6 +159,7 @@
i2c2: i2c@f801c000 {
dmas = <0>, <0>; /* Do not use DMA for i2c2 */
+ pinctrl-0 = <&pinctrl_i2c2_pu>;
status = "okay";
};
@@ -124,6 +174,18 @@
pinctrl@fffff200 {
board {
+ pinctrl_i2c0_pu: i2c0_pu {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_i2c2_pu: i2c2_pu {
+ atmel,pins =
+ <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+ };
+
pinctrl_mmc0_cd: mmc0_cd {
atmel,pins =
<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 80cdcec..b309c1c 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -29,6 +29,7 @@
i2c0 = &i2c0;
ssc0 = &ssc0;
ssc1 = &ssc1;
+ ssc2 = &ssc2;
};
cpus {
@@ -194,6 +195,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -203,6 +206,19 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
+ ssc2: ssc@fffc4000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffc4000 0x4000>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+ clocks = <&ssc2_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -397,6 +413,22 @@
};
};
+ ssc2 {
+ pinctrl_ssc2_tx: ssc2_tx-0 {
+ atmel,pins =
+ <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_ssc2_rx: ssc2_rx-0 {
+ atmel,pins =
+ <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
spi0 {
pinctrl_spi0: spi0-0 {
atmel,pins =
@@ -564,7 +596,8 @@
reg = <0>;
atmel,clk-input-range = <1000000 32000000>;
#atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
+ atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+ <190000000 240000000 2 1>;
};
pllb: pllbck {
@@ -573,9 +606,9 @@
interrupts-extended = <&pmc AT91_PMC_LOCKB>;
clocks = <&main>;
reg = <1>;
- atmel,clk-input-range = <1000000 32000000>;
+ atmel,clk-input-range = <1000000 5000000>;
#atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
+ atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
};
mck: masterck {
@@ -584,16 +617,48 @@
interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
atmel,clk-output-range = <0 94000000>;
- atmel,clk-divisors = <1 2 4 3>;
+ atmel,clk-divisors = <1 2 4 0>;
};
usb: usbck {
compatible = "atmel,at91rm9200-clk-usb";
#clock-cells = <0>;
- atmel,clk-divisors = <1 2 4 3>;
+ atmel,clk-divisors = <1 2 4 0>;
clocks = <&pllb>;
};
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+
+ prog3: prog3 {
+ #clock-cells = <0>;
+ reg = <3>;
+ interrupts = <AT91_PMC_PCKRDY(3)>;
+ };
+ };
+
systemck {
compatible = "atmel,at91rm9200-clk-system";
#address-cells = <1>;
@@ -611,6 +676,30 @@
clocks = <&usb>;
};
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+
+ pck3: pck3 {
+ #clock-cells = <0>;
+ reg = <11>;
+ clocks = <&prog3>;
+ };
+
hclk0: hclk0 {
#clock-cells = <0>;
reg = <16>;
@@ -685,6 +774,21 @@
reg = <13>;
};
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc2_clk: ssc2_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
tc0_clk: tc0_clk {
#clock-cells = <0>;
reg = <17>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 9cdaecf..ace6bf1 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -136,6 +136,36 @@
>;
/* shared pinctrl settings */
+ adc0 {
+ pinctrl_adc0_adtrg: adc0_adtrg {
+ atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad0: adc0_ad0 {
+ atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad1: adc0_ad1 {
+ atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad2: adc0_ad2 {
+ atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad3: adc0_ad3 {
+ atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad4: adc0_ad4 {
+ atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad5: adc0_ad5 {
+ atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad6: adc0_ad6 {
+ atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_adc0_ad7: adc0_ad7 {
+ atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
@@ -634,10 +664,9 @@
adc0: adc@fffb0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "atmel,at91sam9260-adc";
+ compatible = "atmel,at91sam9g45-adc";
reg = <0xfffb0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
- atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 7ff665a..9f5b0a6 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -8,6 +8,7 @@
*/
/dts-v1/;
#include "at91sam9g45.dtsi"
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Atmel AT91SAM9M10G45-EK";
@@ -130,6 +131,21 @@
status = "okay";
};
+ adc0: adc@fffb0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_ad6
+ &pinctrl_adc0_ad7>;
+ atmel,adc-ts-wires = <4>;
+ status = "okay";
+ };
+
pwm0: pwm@fffb8000 {
status = "okay";
@@ -216,14 +232,14 @@
d6 {
label = "d6";
- pwms = <&pwm0 3 5000 0>;
+ pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "nand-disk";
};
d7 {
label = "d7";
- pwms = <&pwm0 1 5000 0>;
+ pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "mmc0";
};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index ae9c39a..1da1831 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Atmel AT91SAM9RL family SoC";
@@ -32,6 +33,7 @@
i2c1 = &i2c1;
ssc0 = &ssc0;
ssc1 = &ssc1;
+ pwm0 = &pwm0;
};
cpus {
@@ -60,12 +62,31 @@
clock-frequency = <0>;
};
+ clocks {
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ fb0: fb@00500000 {
+ compatible = "atmel,at91sam9rl-lcdc";
+ reg = <0x00500000 0x1000>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fb>;
+ clocks = <&lcd_clk>, <&lcd_clk>;
+ clock-names = "hclk", "lcdc_clk";
+ status = "disabled";
+ };
+
nand0: nand@40000000 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
@@ -199,6 +220,16 @@
status = "disabled";
};
+ pwm0: pwm@fffc8000 {
+ compatible = "atmel,at91sam9rl-pwm";
+ reg = <0xfffc8000 0x300>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+ #pwm-cells = <3>;
+ clocks = <&pwm_clk>;
+ clock-names = "pwm_clk";
+ status = "disabled";
+ };
+
spi0: spi@fffcc000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -212,6 +243,111 @@
status = "disabled";
};
+ adc0: adc@fffd0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9rl-adc";
+ reg = <0xfffd0000 0x100>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&adc_clk>, <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
+ atmel,adc-use-external-triggers;
+ atmel,adc-channels-used = <0x3f>;
+ atmel,adc-vref = <3300>;
+ atmel,adc-startup-time = <40>;
+ atmel,adc-res = <8 10>;
+ atmel,adc-res-names = "lowres", "highres";
+ atmel,adc-use-res = "highres";
+
+ trigger@0 {
+ reg = <0>;
+ trigger-name = "timer-counter-0";
+ trigger-value = <0x1>;
+ };
+ trigger@1 {
+ reg = <1>;
+ trigger-name = "timer-counter-1";
+ trigger-value = <0x3>;
+ };
+
+ trigger@2 {
+ reg = <2>;
+ trigger-name = "timer-counter-2";
+ trigger-value = <0x5>;
+ };
+
+ trigger@3 {
+ reg = <3>;
+ trigger-name = "external";
+ trigger-value = <0x13>;
+ trigger-external;
+ };
+ };
+
+ usb0: gadget@fffd4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9rl-udc";
+ reg = <0x00600000 0x100000>,
+ <0xfffd4000 0x4000>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udphs_clk>, <&utmi>;
+ clock-names = "pclk", "hclk";
+ status = "disabled";
+
+ ep0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+ };
+
ramc0: ramc@ffffea00 {
compatible = "atmel,at91sam9260-sdramc";
reg = <0xffffea00 0x200>;
@@ -250,6 +386,44 @@
<0x003fffff 0x0001ff3c>; /* pioD */
/* shared pinctrl settings */
+ adc0 {
+ pinctrl_adc0_ts: adc0_ts-0 {
+ atmel,pins =
+ <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adc0_ad0: adc0_ad0-0 {
+ atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adc0_ad1: adc0_ad1-0 {
+ atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adc0_ad2: adc0_ad2-0 {
+ atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adc0_ad3: adc0_ad3-0 {
+ atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adc0_ad4: adc0_ad4-0 {
+ atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adc0_ad5: adc0_ad5-0 {
+ atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adc0_adtrg: adc0_adtrg-0 {
+ atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
@@ -258,6 +432,33 @@
};
};
+ fb {
+ pinctrl_fb: fb-0 {
+ atmel,pins =
+ <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
i2c_gpio0 {
pinctrl_i2c_gpio0: i2c_gpio0-0 {
atmel,pins =
@@ -319,6 +520,61 @@
};
};
+ pwm0 {
+ pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+ atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+ atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+ atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+ atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+ atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+ atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+ atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+ atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
+ atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+ atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+ atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
@@ -351,15 +607,6 @@
};
};
- spi0 {
- pinctrl_spi0: spi0-0 {
- atmel,pins =
- <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
- <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
- <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
- };
- };
-
tcb0 {
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
@@ -574,8 +821,9 @@
clocks = <&main>;
reg = <0>;
atmel,clk-input-range = <1000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
+ #atmel,pll-clk-output-range-cells = <3>;
+ atmel,pll-clk-output-ranges = <80000000 200000000 0>,
+ <190000000 240000000 2>;
};
utmi: utmick {
@@ -592,7 +840,7 @@
interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
atmel,clk-output-range = <0 94000000>;
- atmel,clk-divisors = <1 2 4 3>;
+ atmel,clk-divisors = <1 2 4 0>;
};
prog: progck {
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index b3b89ba..d4a010e 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -41,6 +41,37 @@
};
ahb {
+ fb0: fb@00500000 {
+ display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <16>;
+ atmel,lcdcon-backlight;
+ atmel,dmacon = <0x1>;
+ atmel,lcdcon2 = <0x80008002>;
+ atmel,guard-time = <1>;
+ atmel,lcd-wiring-mode = "RGB";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <4965000>;
+ hactive = <240>;
+ vactive = <320>;
+ hback-porch = <1>;
+ hfront-porch = <33>;
+ vback-porch = <1>;
+ vfront-porch = <0>;
+ hsync-len = <5>;
+ vsync-len = <1>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
+ };
+
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
@@ -101,6 +132,43 @@
status = "okay";
};
+ adc0: adc@fffd0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_adtrg>;
+ atmel,adc-ts-wires = <4>;
+ status = "okay";
+ };
+
+ usb0: gadget@fffd4000 {
+ atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ spi0: spi@fffcc000 {
+ status = "okay";
+ cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <15000000>;
+ reg = <0>;
+ };
+ };
+
+ pwm0: pwm@fffc8000 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
+ <&pinctrl_pwm0_pwm2_2>;
+ };
+
dbgu: serial@fffff200 {
status = "okay";
};
@@ -126,18 +194,24 @@
};
};
- leds {
- compatible = "gpio-leds";
+ pwmleds {
+ compatible = "pwm-leds";
ds1 {
label = "ds1";
- gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
+ pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
};
ds2 {
label = "ds2";
- gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
+ pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
};
+ };
+
+ leds {
+ compatible = "gpio-leds";
ds3 {
label = "ds3";
@@ -163,4 +237,12 @@
gpio-key,wakeup;
};
};
+
+ i2c@0 {
+ status = "okay";
+ };
+
+ i2c@1 {
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 2f8bcd0..58ff8e2 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -129,12 +129,10 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
+ #clock-cells = <1>;
+ clock-output-names = "cam_a_clkout", "cam_b_clkout";
ranges;
- clock_cam: clock-controller {
- #clock-cells = <1>;
- };
-
fimc_0: fimc@11800000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
@@ -371,6 +369,8 @@
interrupts = <0 60 0>;
clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
status = "disabled";
};
@@ -382,6 +382,8 @@
interrupts = <0 61 0>;
clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_bus>;
status = "disabled";
};
@@ -393,6 +395,8 @@
interrupts = <0 62 0>;
clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_bus>;
status = "disabled";
};
@@ -404,6 +408,8 @@
interrupts = <0 63 0>;
clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_bus>;
status = "disabled";
};
@@ -415,6 +421,8 @@
interrupts = <0 64 0>;
clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_bus>;
status = "disabled";
};
@@ -426,6 +434,8 @@
interrupts = <0 65 0>;
clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_bus>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 63e34b2..9296dee 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -28,6 +28,21 @@
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
};
+ sysram@02020000 {
+ smp-sysram@0 {
+ status = "disabled";
+ };
+
+ smp-sysram@5000 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x5000 0x1000>;
+ };
+
+ smp-sysram@1f000 {
+ status = "disabled";
+ };
+ };
+
mct@10050000 {
compatible = "none";
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index cacf614..ee3001f 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -31,6 +31,24 @@
pinctrl2 = &pinctrl_2;
};
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x20000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@1f000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x1f000 0x1000>;
+ };
+ };
+
pd_lcd1: lcd1-power-domain@10023CA0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 9583563..f621fd9 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -20,7 +20,7 @@
compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
aliases {
- i2c8 = &i2c_ak8975;
+ i2c9 = &i2c_ak8975;
};
memory {
@@ -80,7 +80,24 @@
enable-active-high;
};
- /* More to come */
+ cam_af_reg: voltage-regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAM_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpm0 4 0>;
+ enable-active-high;
+ };
+
+ cam_isp_core_reg: voltage-regulator-4 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAM_ISP_CORE_1.2V_EN";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&gpm0 3 0>;
+ enable-active-high;
+ regulator-always-on;
+ };
};
gpio-keys {
@@ -140,6 +157,38 @@
};
};
+ i2c_0: i2c@13860000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ s5c73m3@3c {
+ compatible = "samsung,s5c73m3";
+ reg = <0x3c>;
+ standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
+ xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+ vdd-int-supply = <&buck9_reg>;
+ vddio-cis-supply = <&ldo9_reg>;
+ vdda-supply = <&ldo17_reg>;
+ vddio-host-supply = <&ldo18_reg>;
+ vdd-af-supply = <&cam_af_reg>;
+ vdd-reg-supply = <&cam_io_reg>;
+ clock-frequency = <24000000>;
+ /* CAM_A_CLKOUT */
+ clocks = <&camera 0>;
+ clock-names = "cis_extclk";
+ port {
+ s5c73m3_ep: endpoint {
+ remote-endpoint = <&csis0_ep>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+ };
+
i2c@138D0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
@@ -586,8 +635,8 @@
status = "okay";
};
- camera {
- pinctrl-0 = <&cam_port_b_clk_active>;
+ camera: camera {
+ pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
pinctrl-names = "default";
status = "okay";
@@ -607,6 +656,23 @@
status = "okay";
};
+ csis_0: csis@11880000 {
+ status = "okay";
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ clock-frequency = <176000000>;
+
+ /* Camera C (3) MIPI CSI-2 (CSIS0) */
+ port@3 {
+ reg = <3>;
+ csis0_ep: endpoint {
+ remote-endpoint = <&s5c73m3_ep>;
+ data-lanes = <1 2 3 4>;
+ samsung,csis-hs-settle = <12>;
+ };
+ };
+ };
+
csis_1: csis@11890000 {
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
@@ -647,10 +713,11 @@
reg = <0x10>;
svdda-supply = <&cam_io_reg>;
svddio-supply = <&ldo19_reg>;
+ afvdd-supply = <&ldo19_reg>;
clock-frequency = <24000000>;
/* CAM_B_CLKOUT */
- clocks = <&clock_cam 1>;
- clock-names = "mclk";
+ clocks = <&camera 1>;
+ clock-names = "extclk";
samsung,camclk-out = <1>;
gpios = <&gpm1 6 0>;
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index c4a9306..70e3765 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -37,6 +37,24 @@
interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
};
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x40000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@2f000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x2f000 0x1000>;
+ };
+ };
+
pd_isp: isp-power-domain@10023CA0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 2c1560d..89ac90f 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -240,7 +240,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- hdmiphy@38 {
+ hdmiphy: hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
@@ -304,6 +304,10 @@
hdmi {
hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
};
gpio-keys {
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 9a49e68..886cfca 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -351,6 +351,34 @@
samsung,pin-drv = <0>;
};
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpb2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpb2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpb2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpb2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
i2c7_bus: i2c7-bus {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <3>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1ce1088..079fdf9 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -25,6 +25,13 @@
};
pinctrl@11400000 {
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
sd3_clk: sd3-clk {
samsung,pin-drv = <0>;
};
@@ -37,6 +44,50 @@
sd3_bus4: sd3-bus-width4 {
samsung,pin-drv = <0>;
};
+
+ max98095_en: max98095-en {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@13400000 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
gpio-keys {
@@ -52,6 +103,12 @@
};
};
+ vbat: vbat-fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat-supply";
+ regulator-boot-on;
+ };
+
i2c-arbitrator {
compatible = "i2c-arb-gpio-challenge";
#address-cells = <1>;
@@ -65,6 +122,9 @@
wait-retry-us = <3000>;
wait-free-us = <50000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
/* Use ID 104 as a hint that we're on physical bus 4 */
i2c_104: i2c@0 {
reg = <0>;
@@ -82,6 +142,8 @@
reg = <0x1e>;
interrupts = <6 0>;
interrupt-parent = <&gpx1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
wakeup-source;
keyboard-controller {
@@ -173,6 +235,83 @@
0x070c0069>; /* LEFT */
};
};
+
+ power-regulator {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+
+ /*
+ * Config irq to disable internal pulls
+ * even though we run in polling mode.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65090_irq>;
+
+ vsys1-supply = <&vbat>;
+ vsys2-supply = <&vbat>;
+ vsys3-supply = <&vbat>;
+ infet1-supply = <&vbat>;
+ infet2-supply = <&vbat>;
+ infet3-supply = <&vbat>;
+ infet4-supply = <&vbat>;
+ infet5-supply = <&vbat>;
+ infet6-supply = <&vbat>;
+ infet7-supply = <&vbat>;
+ vsys-l1-supply = <&vbat>;
+ vsys-l2-supply = <&vbat>;
+
+ regulators {
+ dcdc1 {
+ ti,enable-ext-control;
+ };
+ dcdc2 {
+ ti,enable-ext-control;
+ };
+ dcdc3 {
+ ti,enable-ext-control;
+ };
+ fet1 {
+ regulator-name = "vcd_led";
+ ti,overcurrent-wait = <3>;
+ };
+ tps65090_fet2: fet2 {
+ regulator-name = "video_mid";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet3 {
+ regulator-name = "wwan_r";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet4 {
+ regulator-name = "sdcard";
+ ti,overcurrent-wait = <3>;
+ };
+ fet5 {
+ regulator-name = "camout";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet6 {
+ regulator-name = "lcd_vdd";
+ ti,overcurrent-wait = <3>;
+ };
+ tps65090_fet7: fet7 {
+ regulator-name = "video_mid_1a";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ ldo1 {
+ };
+ ldo2 {
+ };
+ };
+
+ charger {
+ compatible = "ti,tps65090-charger";
+ };
+ };
};
};
@@ -196,6 +335,41 @@
};
};
+ i2c@12CD0000 {
+ max98095: codec@11 {
+ compatible = "maxim,max98095";
+ reg = <0x11>;
+ pinctrl-0 = <&max98095_en>;
+ pinctrl-names = "default";
+ };
+ };
+
+ i2s0: i2s@03830000 {
+ status = "okay";
+ };
+
+ sound {
+ compatible = "google,snow-audio-max98095";
+
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&max98095>;
+ };
+
+ usb3_vbus_reg: regulator-usb3 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5.0V_USB3CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpx2 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_vbus_en>;
+ enable-active-high;
+ };
+
+ phy@12100000 {
+ vbus-supply = <&usb3_vbus_reg>;
+ };
+
usb@12110000 {
samsung,vbus-gpio = <&gpx1 1 0>;
};
@@ -206,4 +380,54 @@
clock-frequency = <24000000>;
};
};
+
+ hdmi {
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 1000000 0>;
+ brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+ default-brightness-level = <7>;
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ };
+
+ fimd@14400000 {
+ status = "okay";
+ samsung,invert-vclk;
+ };
+
+ dp-controller@145B0000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 0>;
+
+ display-timings {
+ native-mode = <&timing1>;
+
+ timing1: timing@1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 3742331..68a3e6f 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -72,6 +72,24 @@
};
};
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x30000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x30000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@2f000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x2f000 0x1000>;
+ };
+ };
+
pd_gsc: gsc-power-domain@10044000 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044000 0x20>;
@@ -533,22 +551,18 @@
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <0 72 0>;
- usb-phy = <&usb2_phy &usb3_phy>;
+ phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+ phy-names = "usb2-phy", "usb3-phy";
};
};
- usb3_phy: usbphy@12100000 {
- compatible = "samsung,exynos5250-usb3phy";
+ usbdrd_phy: phy@12100000 {
+ compatible = "samsung,exynos5250-usbdrd-phy";
reg = <0x12100000 0x100>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>;
- clock-names = "ext_xtal", "usbdrd30";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- usbphy-sys {
- reg = <0x10040704 0x8>;
- };
+ clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
};
usb@12110000 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 80a3bf4..6ee8149 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -37,6 +37,11 @@
status = "okay";
};
+ codec@11000000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ };
+
mmc@12200000 {
status = "okay";
broken-cd;
@@ -364,16 +369,4 @@
gpio-key,wakeup;
};
};
-
- amba {
- mdma1: mdma@11C10000 {
- /*
- * MDMA1 can support both secure and non-secure
- * AXI transactions. When this is enabled in the kernel
- * for boards that run in secure mode, we are getting
- * imprecise external aborts causing the kernel to oops.
- */
- status = "disabled";
- };
- };
};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
new file mode 100644
index 0000000..d4127b0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -0,0 +1,287 @@
+/*
+ * Google Peach Pit Rev 6+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5420.dtsi"
+
+/ {
+ model = "Google Peach Pit Rev 6+";
+
+ compatible = "google,pit-rev16",
+ "google,pit-rev15", "google,pit-rev14",
+ "google,pit-rev13", "google,pit-rev12",
+ "google,pit-rev11", "google,pit-rev10",
+ "google,pit-rev9", "google,pit-rev8",
+ "google,pit-rev7", "google,pit-rev6",
+ "google,pit", "google,peach","samsung,exynos5420",
+ "samsung,exynos5";
+
+ memory {
+ reg = <0x20000000 0x80000000>;
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,exynos5420-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 1000000 0>;
+ brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+ default-brightness-level = <7>;
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ };
+
+ sound {
+ compatible = "google,snow-audio-max98090";
+
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&max98090>;
+ };
+
+ usb300_vbus_reg: regulator-usb300 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5.0V_USB3CON0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gph0 0 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb300_vbus_en>;
+ enable-active-high;
+ };
+
+ usb301_vbus_reg: regulator-usb301 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5.0V_USB3CON1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gph0 1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb301_vbus_en>;
+ enable-active-high;
+ };
+};
+
+&pinctrl_0 {
+ max98090_irq: max98090-irq {
+ samsung,pins = "gpx0-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ tpm_irq: tpm-irq {
+ samsung,pins = "gpx1-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_3 {
+ usb300_vbus_en: usb300-vbus-en {
+ samsung,pins = "gph0-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb301_vbus_en: usb301-vbus-en {
+ samsung,pins = "gph0-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ dp_hpd_gpio: dp_hpd_gpio {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&uart_3 {
+ status = "okay";
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ caps2-mmc-hs200-1_8v;
+ supports-highspeed;
+ non-removable;
+ card-detect-delay = <200>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&hsi2c_7 {
+ status = "okay";
+
+ max98090: codec@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupts = <2 0>;
+ interrupt-parent = <&gpx0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max98090_irq>;
+ };
+};
+
+&hsi2c_9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+
+ /* Unused irq; but still need to configure the pins */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpm_irq>;
+ };
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+};
+
+&hdmi {
+ status = "okay";
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ ddc = <&i2c_2>;
+};
+
+&usbdrd3_0 {
+ vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd3_1 {
+ vbus-supply = <&usb301_vbus_reg>;
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+ timeout-sec = <32>;
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd_gpio>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x06>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx2 6 0>;
+
+ display-timings {
+ native-mode = <&timing1>;
+
+ timing1: timing@1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index e62c8eb..ba686e4 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -624,6 +624,34 @@
samsung,pin-drv = <0>;
};
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpb2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpb2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpb2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpb2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
i2c7_hs_bus: i2c7-hs-bus {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <3>;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 6910485..6052aa9 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -68,6 +68,11 @@
status = "okay";
};
+ codec@11000000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ };
+
mmc@12200000 {
status = "okay";
broken-cd;
@@ -140,6 +145,22 @@
};
};
+ pinctrl@14000000 {
+ usb300_vbus_en: usb300-vbus-en {
+ samsung,pins = "gpg0-5";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb301_vbus_en: usb301-vbus-en {
+ samsung,pins = "gpg1-4";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
hdmi@14530000 {
status = "okay";
hpd-gpio = <&gpx3 7 0>;
@@ -147,6 +168,36 @@
pinctrl-0 = <&hdmi_hpd_irq>;
};
+ usb300_vbus_reg: regulator-usb300 {
+ compatible = "regulator-fixed";
+ regulator-name = "VBUS0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpg0 5 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb300_vbus_en>;
+ enable-active-high;
+ };
+
+ usb301_vbus_reg: regulator-usb301 {
+ compatible = "regulator-fixed";
+ regulator-name = "VBUS1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpg1 4 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb301_vbus_en>;
+ enable-active-high;
+ };
+
+ phy@12100000 {
+ vbus-supply = <&usb300_vbus_reg>;
+ };
+
+ phy@12500000 {
+ vbus-supply = <&usb301_vbus_reg>;
+ };
+
i2c_2: i2c@12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index c3a9a66..9b6414a 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -47,6 +47,8 @@
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
+ usbdrdphy0 = &usbdrd_phy0;
+ usbdrdphy1 = &usbdrd_phy1;
};
cpus {
@@ -110,6 +112,24 @@
};
};
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x54000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x54000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@53000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x53000 0x1000>;
+ };
+ };
+
clock: clock-controller@10010000 {
compatible = "samsung,exynos5420-clock";
reg = <0x10010000 0x30000>;
@@ -125,12 +145,13 @@
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
- codec@11000000 {
+ mfc: codec@11000000 {
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
+ samsung,power-domain = <&mfc_pd>;
};
mmc_0: mmc@12200000 {
@@ -169,7 +190,7 @@
status = "disabled";
};
- mct@101C0000 {
+ mct: mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-controller;
@@ -219,16 +240,6 @@
reg = <0x100440C0 0x20>;
};
- mau_pd: power-domain@100440E0 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x100440E0 0x20>;
- };
-
- g2d_pd: power-domain@10044100 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10044100 0x20>;
- };
-
msc_pd: power-domain@10044120 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044120 0x20>;
@@ -270,7 +281,7 @@
interrupts = <0 47 0>;
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -336,6 +347,13 @@
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
+ /*
+ * MDMA1 can support both secure and non-secure
+ * AXI transactions. When this is enabled in the kernel
+ * for boards that run in secure mode, we are getting
+ * imprecise external aborts causing the kernel to oops.
+ */
+ status = "disabled";
};
};
@@ -430,22 +448,22 @@
status = "disabled";
};
- serial@12C00000 {
+ uart_0: serial@12C00000 {
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C10000 {
+ uart_1: serial@12C10000 {
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C20000 {
+ uart_2: serial@12C20000 {
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
- serial@12C30000 {
+ uart_3: serial@12C30000 {
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -465,14 +483,14 @@
#phy-cells = <0>;
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
clocks = <&clock CLK_DP1>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
samsung,power-domain = <&disp_pd>;
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
@@ -632,8 +650,8 @@
status = "disabled";
};
- hdmi@14530000 {
- compatible = "samsung,exynos4212-hdmi";
+ hdmi: hdmi@14530000 {
+ compatible = "samsung,exynos5420-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
@@ -641,10 +659,15 @@
<&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
+ phy = <&hdmiphy>;
status = "disabled";
};
- mixer@14450000 {
+ hdmiphy: hdmiphy@145D0000 {
+ reg = <0x145D0000 0x20>;
+ };
+
+ mixer: mixer@14450000 {
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
@@ -715,7 +738,7 @@
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
- watchdog@101D0000 {
+ watchdog: watchdog@101D0000 {
compatible = "samsung,exynos5420-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
@@ -724,12 +747,63 @@
samsung,syscon-phandle = <&pmu_system_controller>;
};
- sss@10830000 {
+ sss: sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x10000>;
interrupts = <0 112 0>;
clocks = <&clock 471>;
clock-names = "secss";
- samsung,power-domain = <&g2d_pd>;
+ };
+
+ usbdrd3_0: usb@12000000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&clock CLK_USBD300>;
+ clock-names = "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x12000000 0x10000>;
+ interrupts = <0 72 0>;
+ phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usbdrd_phy0: phy@12100000 {
+ compatible = "samsung,exynos5420-usbdrd-phy";
+ reg = <0x12100000 0x100>;
+ clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
+ };
+
+ usbdrd3_1: usb@12400000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&clock CLK_USBD301>;
+ clock-names = "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x12400000 0x10000>;
+ interrupts = <0 73 0>;
+ phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usbdrd_phy1: phy@12500000 {
+ compatible = "samsung,exynos5420-usbdrd-phy";
+ reg = <0x12500000 0x100>;
+ clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
};
};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index 62fb3da..ad12da3 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -172,3 +172,16 @@
fsl,uart-has-rtscts;
status = "okay";
};
+
+&usbhost1 {
+ phy_type = "serial";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ phy_type = "utmi";
+ dr_mode = "otg";
+ external-vbus-divider;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
index f8db366..9b31faa 100644
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -16,21 +16,98 @@
model = "Ka-Ro TX25";
compatible = "karo,imx25-tx25", "fsl,imx25";
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_fec_phy: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "fec-phy";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 9 0>;
+ enable-active-high;
+ };
+ };
+
memory {
reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
};
};
+&iomuxc {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+ MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
+ MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
+ MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX25_PAD_D11__GPIO_4_9 0x80000000 /* FEC PHY power on pin */
+ MX25_PAD_D13__GPIO_4_7 0x80000000 /* FEC reset */
+ MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX25_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX25_PAD_NF_CE0__NF_CE0 0x80000000
+ MX25_PAD_NFWE_B__NFWE_B 0x80000000
+ MX25_PAD_NFRE_B__NFRE_B 0x80000000
+ MX25_PAD_NFALE__NFALE 0x80000000
+ MX25_PAD_NFCLE__NFCLE 0x80000000
+ MX25_PAD_NFWP_B__NFWP_B 0x80000000
+ MX25_PAD_NFRB__NFRB 0x80000000
+ MX25_PAD_D7__D7 0x80000000
+ MX25_PAD_D6__D6 0x80000000
+ MX25_PAD_D5__D5 0x80000000
+ MX25_PAD_D4__D4 0x80000000
+ MX25_PAD_D3__D3 0x80000000
+ MX25_PAD_D2__D2 0x80000000
+ MX25_PAD_D1__D1 0x80000000
+ MX25_PAD_D0__D0 0x80000000
+ >;
+ };
+};
+
&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-reset-gpios = <&gpio3 7 0>;
phy-mode = "rmii";
+ phy-supply = <®_fec_phy>;
status = "okay";
};
&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
nand-on-flash-bbt;
+ nand-ecc-mode = "hw";
+ nand-bus-width = <8>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index f607ce5..c608942 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -10,6 +10,7 @@
*/
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "imx25.dtsi"
/ {
@@ -19,18 +20,232 @@
memory {
reg = <0x80000000 0x4000000>;
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_fec_3v3: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "fec-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 3 0>;
+ enable-active-high;
+ };
+
+ reg_2p5v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ reg_3p3v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_can_3v3: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "can-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 6 0>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx25-pdk-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx25-pdk-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
};
-&uart1 {
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_3v3>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio2 1 0>;
+ wp-gpios = <&gpio2 0 0>;
status = "okay";
};
&fec {
phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-supply = <®_fec_3v3>;
+ phy-reset-gpios = <&gpio4 8 0>;
status = "okay";
};
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 129>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&iomuxc {
+ imx25-pdk {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX25_PAD_RW__AUD4_TXFS 0xe0
+ MX25_PAD_OE__AUD4_TXC 0xe0
+ MX25_PAD_EB0__AUD4_TXD 0xe0
+ MX25_PAD_EB1__AUD4_RXD 0xe0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX25_PAD_GPIO_A__CAN1_TX 0x0
+ MX25_PAD_GPIO_B__CAN1_RX 0x0
+ MX25_PAD_D14__GPIO_4_6 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX25_PAD_SD1_CMD__SD1_CMD 0x80000000
+ MX25_PAD_SD1_CLK__SD1_CLK 0x80000000
+ MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000
+ MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000
+ MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000
+ MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000
+ MX25_PAD_A14__GPIO_2_0 0x80000000
+ MX25_PAD_A15__GPIO_2_1 0x80000000
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
+ MX25_PAD_A17__GPIO_2_3 0x80000000
+ MX25_PAD_D12__GPIO_4_8 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
+ MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
+ >;
+ };
+
+ pinctrl_kpp: kppgrp {
+ fsl,pins = <
+ MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000
+ MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000
+ MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000
+ MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000
+ MX25_PAD_KPP_COL0__KPP_COL0 0x80000000
+ MX25_PAD_KPP_COL1__KPP_COL1 0x80000000
+ MX25_PAD_KPP_COL2__KPP_COL2 0x80000000
+ MX25_PAD_KPP_COL3__KPP_COL3 0x80000000
+ >;
+ };
+
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX25_PAD_UART1_RTS__UART1_RTS 0xe0
+ MX25_PAD_UART1_CTS__UART1_CTS 0xe0
+ MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+ MX25_PAD_UART1_RXD__UART1_RXD 0xc0
+ >;
+ };
+ };
+};
+
&nfc {
nand-on-flash-bbt;
status = "okay";
};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp>;
+ linux,keymap = <
+ MATRIX_KEY(0x0, 0x0, KEY_UP)
+ MATRIX_KEY(0x0, 0x1, KEY_DOWN)
+ MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x0, 0x3, KEY_HOME)
+ MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
+ MATRIX_KEY(0x1, 0x1, KEY_LEFT)
+ MATRIX_KEY(0x1, 0x2, KEY_ENTER)
+ MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
+ MATRIX_KEY(0x2, 0x0, KEY_F6)
+ MATRIX_KEY(0x2, 0x1, KEY_F8)
+ MATRIX_KEY(0x2, 0x2, KEY_F9)
+ MATRIX_KEY(0x2, 0x3, KEY_F10)
+ MATRIX_KEY(0x3, 0x0, KEY_F1)
+ MATRIX_KEY(0x3, 0x1, KEY_F2)
+ MATRIX_KEY(0x3, 0x2, KEY_F3)
+ MATRIX_KEY(0x3, 0x2, KEY_POWER)
+ >;
+ status = "okay";
+};
+
+&ssi1 {
+ codec-handle = <&codec>;
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbhost1 {
+ phy_type = "serial";
+ dr_mode = "host";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index ea323f0..bb74d95 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -14,6 +14,7 @@
/ {
aliases {
+ ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -21,6 +22,8 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
+ mmc0 = &esdhc1;
+ mmc1 = &esdhc2;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -165,9 +168,10 @@
status = "disabled";
};
- kpp@43fa8000 {
+ kpp: kpp@43fa8000 {
#address-cells = <1>;
#size-cells = <0>;
+ compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
reg = <0x43fa8000 0x4000>;
clocks = <&clks 102>;
clock-names = "";
@@ -482,23 +486,13 @@
clocks = <&clks 99>;
};
- usbphy1: usbphy@1 {
- compatible = "nop-usbphy";
- status = "disabled";
- };
-
- usbphy2: usbphy@2 {
- compatible = "nop-usbphy";
- status = "disabled";
- };
-
usbotg: usb@53ff4000 {
compatible = "fsl,imx25-usb", "fsl,imx27-usb";
reg = <0x53ff4000 0x0200>;
interrupts = <37>;
- clocks = <&clks 9>, <&clks 70>, <&clks 8>;
- clock-names = "ipg", "ahb", "per";
+ clocks = <&clks 70>;
fsl,usbmisc = <&usbmisc 0>;
+ fsl,usbphy = <&usbphy0>;
status = "disabled";
};
@@ -506,9 +500,9 @@
compatible = "fsl,imx25-usb", "fsl,imx27-usb";
reg = <0x53ff4400 0x0200>;
interrupts = <35>;
- clocks = <&clks 9>, <&clks 70>, <&clks 8>;
- clock-names = "ipg", "ahb", "per";
+ clocks = <&clks 70>;
fsl,usbmisc = <&usbmisc 1>;
+ fsl,usbphy = <&usbphy1>;
status = "disabled";
};
@@ -518,7 +512,6 @@
clocks = <&clks 9>, <&clks 70>, <&clks 8>;
clock-names = "ipg", "ahb", "per";
reg = <0x53ff4600 0x00f>;
- status = "disabled";
};
dryice@53ffc000 {
@@ -530,6 +523,11 @@
};
};
+ iram: sram@78000000 {
+ compatible = "mmio-sram";
+ reg = <0x78000000 0x20000>;
+ };
+
emi@80000000 {
compatible = "fsl,emi-bus", "simple-bus";
#address-cells = <1>;
@@ -550,4 +548,20 @@
};
};
};
+
+ usbphy {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usb-phy@0 {
+ reg = <0>;
+ compatible = "usb-nop-xceiv";
+ };
+
+ usbphy1: usb-phy@1 {
+ reg = <1>;
+ compatible = "usb-nop-xceiv";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 5ce89aa..4c31771 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -17,15 +17,181 @@
compatible = "fsl,imx27-pdk", "fsl,imx27";
memory {
- reg = <0x0 0x0>;
+ reg = <0xa0000000 0x08000000>;
};
+
+ usbphy {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usbphy@0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ clocks = <&clks 0>;
+ clock-names = "main_clk";
+ };
+ };
+};
+
+&cspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi2>;
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ pmic: mc13783@0 {
+ compatible = "fsl,mc13783";
+ reg = <0>;
+ spi-cs-high;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+ regulators {
+ vgen_reg: vgen {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vmmc1_reg: vmmc1 {
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ gpo1_reg: gpo1 {
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ gpo3_reg: gpo3 {
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&fec {
+ phy-mode = "mii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&kpp {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_UP)
+ MATRIX_KEY(0, 1, KEY_DOWN)
+ MATRIX_KEY(1, 0, KEY_RIGHT)
+ MATRIX_KEY(1, 1, KEY_LEFT)
+ MATRIX_KEY(1, 2, KEY_ENTER)
+ MATRIX_KEY(2, 0, KEY_F6)
+ MATRIX_KEY(2, 1, KEY_F8)
+ MATRIX_KEY(2, 2, KEY_F9)
+ MATRIX_KEY(2, 3, KEY_F10)
+ >;
+ status = "okay";
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
};
&uart1 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
-&fec {
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ dr_mode = "otg";
+ fsl,usbphy = <&usbphy0>;
+ phy_type = "ulpi";
status = "okay";
};
+
+&iomuxc {
+ imx27-pdk {
+ pinctrl_cspi2: cspi2grp {
+ fsl,pins = <
+ MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+ MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+ MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+ MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 /* SPI2 CS0 */
+ MX27_PAD_TOUT__GPIO3_14 0x0 /* PMIC IRQ */
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <
+ MX27_PAD_NFRB__NFRB 0x0
+ MX27_PAD_NFCLE__NFCLE 0x0
+ MX27_PAD_NFWP_B__NFWP_B 0x0
+ MX27_PAD_NFCE_B__NFCE_B 0x0
+ MX27_PAD_NFALE__NFALE 0x0
+ MX27_PAD_NFRE_B__NFRE_B 0x0
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+ MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+ MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+ MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+ MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+ MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+ MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+ MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+ MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+ MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+ MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+ MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 3c3964a..7c869fe 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -15,6 +15,10 @@
model = "Phytec pca100 rapid development kit";
compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
+ chosen {
+ stdout-path = &uart1;
+ };
+
display: display {
model = "Primeview-PD050VL1";
native-mode = <&timing0>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index df3b2e7..fe02bc7 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -12,14 +12,79 @@
/ {
model = "Phytec pcm970";
compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ display0: LQ035Q7 {
+ model = "Sharp-LQ035Q7";
+ native-mode = <&timing0>;
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xf00080c0>;
+
+ display-timings {
+ timing0: 240x320 {
+ clock-frequency = <5500000>;
+ hactive = <240>;
+ vactive = <320>;
+ hback-porch = <5>;
+ hsync-len = <7>;
+ hfront-porch = <16>;
+ vback-porch = <7>;
+ vsync-len = <1>;
+ vfront-porch = <9>;
+ pixelclk-active = <1>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ de-active = <0>;
+ };
+ };
+ };
+
+ regulators {
+ regulator@2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_csien>;
+ reg = <2>;
+ regulator-name = "CSI_EN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ regulator-always-on;
+ };
+ };
+
+ usbphy {
+ usbphy2: usbphy@2 {
+ compatible = "usb-nop-xceiv";
+ reg = <2>;
+ vcc-supply = <®_5v0>;
+ clocks = <&clks 0>;
+ clock-names = "main_clk";
+ };
+ };
};
&cspi1 {
+ pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
<&gpio4 27 GPIO_ACTIVE_LOW>;
};
+&fb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_imxfb1>;
+ display = <&display0>;
+ lcd-supply = <®_5v0>;
+ fsl,dmacr = <0x00020010>;
+ fsl,lscr1 = <0x00120300>;
+ fsl,lpccr = <0x00a903ff>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -36,6 +101,50 @@
&iomuxc {
imx27_phycore_rdk {
+ pinctrl_csien: csiengrp {
+ fsl,pins = <
+ MX27_PAD_USB_OC_B__GPIO2_24 0x0
+ >;
+ };
+
+ pinctrl_cspi1cs1: cspi1cs1grp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+ >;
+ };
+
+ pinctrl_imxfb1: imxfbgrp {
+ fsl,pins = <
+ MX27_PAD_LD0__LD0 0x0
+ MX27_PAD_LD1__LD1 0x0
+ MX27_PAD_LD2__LD2 0x0
+ MX27_PAD_LD3__LD3 0x0
+ MX27_PAD_LD4__LD4 0x0
+ MX27_PAD_LD5__LD5 0x0
+ MX27_PAD_LD6__LD6 0x0
+ MX27_PAD_LD7__LD7 0x0
+ MX27_PAD_LD8__LD8 0x0
+ MX27_PAD_LD9__LD9 0x0
+ MX27_PAD_LD10__LD10 0x0
+ MX27_PAD_LD11__LD11 0x0
+ MX27_PAD_LD12__LD12 0x0
+ MX27_PAD_LD13__LD13 0x0
+ MX27_PAD_LD14__LD14 0x0
+ MX27_PAD_LD15__LD15 0x0
+ MX27_PAD_LD16__LD16 0x0
+ MX27_PAD_LD17__LD17 0x0
+ MX27_PAD_CLS__CLS 0x0
+ MX27_PAD_CONTRAST__CONTRAST 0x0
+ MX27_PAD_LSCLK__LSCLK 0x0
+ MX27_PAD_OE_ACD__OE_ACD 0x0
+ MX27_PAD_PS__PS 0x0
+ MX27_PAD_REV__REV 0x0
+ MX27_PAD_SPL_SPR__SPL_SPR 0x0
+ MX27_PAD_HSYNC__HSYNC 0x0
+ MX27_PAD_VSYNC__VSYNC 0x0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
/* Add pullup to DATA line */
fsl,pins = <
@@ -193,19 +302,16 @@
dr_mode = "host";
phy_type = "ulpi";
vbus-supply = <®_5v0>;
+ fsl,usbphy = <&usbphy2>;
disable-over-current;
status = "okay";
};
-&usbphy2 {
- vcc-supply = <®_5v0>;
-};
-
&weim {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_weim>;
- can@d4000000 {
+ can@4,0 {
compatible = "nxp,sja1000";
reg = <4 0x00000000 0x00000100>;
interrupt-parent = <&gpio5>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index cefaa69..31e9f70 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -41,6 +41,20 @@
regulator-max-microvolt = <5000000>;
};
};
+
+ usbphy {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usbphy@0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ vcc-supply = <&sw3_reg>;
+ clocks = <&clks 0>;
+ clock-names = "main_clk";
+ };
+ };
};
&audmux {
@@ -66,9 +80,9 @@
status = "okay";
pmic: mc13783@0 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "fsl,mc13783";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
reg = <0>;
spi-cs-high;
spi-max-frequency = <20000000>;
@@ -166,7 +180,7 @@
&fec {
phy-mode = "mii";
- phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
phy-supply = <®_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
@@ -204,7 +218,6 @@
MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */
- MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */
>;
};
@@ -251,6 +264,21 @@
>;
};
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */
+ >;
+ };
+
+ pinctrl_ssi1: ssi1grp {
+ fsl,pins = <
+ MX27_PAD_SSI1_FS__SSI1_FS 0x0
+ MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
+ MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
+ MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
+ >;
+ };
+
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
@@ -279,23 +307,28 @@
status = "okay";
};
+&ssi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssi1>;
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
dr_mode = "otg";
phy_type = "ulpi";
+ fsl,usbphy = <&usbphy0>;
vbus-supply = <&sw3_reg>;
+ disable-over-current;
status = "okay";
};
-&usbphy0 {
- vcc-supply = <&sw3_reg>;
-};
-
&weim {
status = "okay";
- nor: nor@c0000000 {
+ nor: nor@0,0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x02000000>;
bank-width = <2>;
@@ -305,7 +338,7 @@
#size-cells = <1>;
};
- sram: sram@c8000000 {
+ sram: sram@1,0 {
compatible = "mtd-ram";
reg = <1 0x00000000 0x00800000>;
bank-width = <2>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 137e010..a75555c 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -11,11 +11,13 @@
#include "skeleton.dtsi"
#include "imx27-pinfunc.h"
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
+ ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -71,26 +73,6 @@
};
};
- usbphy {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usbphy@0 {
- compatible = "usb-nop-xceiv";
- reg = <0>;
- clocks = <&clks 75>;
- clock-names = "main_clk";
- };
-
- usbphy2: usbphy@2 {
- compatible = "usb-nop-xceiv";
- reg = <2>;
- clocks = <&clks 75>;
- clock-names = "main_clk";
- };
- };
-
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -464,9 +446,8 @@
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
- clocks = <&clks 15>;
+ clocks = <&clks 75>;
fsl,usbmisc = <&usbmisc 0>;
- fsl,usbphy = <&usbphy0>;
status = "disabled";
};
@@ -474,7 +455,7 @@
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
- clocks = <&clks 15>;
+ clocks = <&clks 75>;
fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
@@ -483,9 +464,8 @@
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
- clocks = <&clks 15>;
+ clocks = <&clks 75>;
fsl,usbmisc = <&usbmisc 2>;
- fsl,usbphy = <&usbphy2>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index 5f326c1..ce1a7ef 100644
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -25,9 +25,9 @@
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_8bit_pins_a
+ pinctrl-0 = <&mmc0_4bit_pins_a
&mmc0_cd_cfg &mmc0_sck_cfg>;
- bus-width = <8>;
+ bus-width = <4>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -39,7 +39,7 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
- MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */
+ MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
>;
fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <MXS_VOLTAGE_HIGH>;
@@ -82,7 +82,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
phy-supply = <®_3p3v>;
- phy-reset-gpios = <&gpio4 13 0>;
+ phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
status = "okay";
};
@@ -110,12 +110,12 @@
status {
label = "duckbill:green:status";
- gpios = <&gpio3 5 0>;
+ gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
};
failure {
label = "duckbill:red:status";
- gpios = <&gpio3 4 0>;
+ gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 90a5795..a95cc53 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -9,6 +9,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
#include "imx28-pinfunc.h"
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
index 906ae93..9c2b715 100644
--- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -37,6 +37,17 @@
compatible = "nxp,pcf8563";
reg = <0x51>;
};
+
+ tsc2007: tsc2007@48 {
+ compatible = "ti,tsc2007";
+ gpios = <&gpio3 2 0>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <0x2 0x8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc2007_1>;
+ reg = <0x48>;
+ ti,x-plate-ohms = <180>;
+ };
};
&iomuxc {
@@ -70,6 +81,10 @@
MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000
>;
};
+
+ pinctrl_tsc2007_1: tsc2007grp-1 {
+ fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
index 1bdec21..f04ae91 100644
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -46,6 +46,14 @@
linux,default-trigger = "heartbeat";
};
};
+
+ sound {
+ compatible = "eukrea,asoc-tlv320";
+ eukrea,model = "imx35-eukrea-tlv320aic23";
+ ssi-controller = <&ssi1>;
+ fsl,mux-int-port = <1>;
+ fsl,mux-ext-port = <4>;
+ };
};
&audmux {
@@ -124,6 +132,7 @@
};
&ssi1 {
+ codec-handle = <&tlv320aic23>;
fsl,mode = "i2s-slave";
status = "okay";
};
@@ -141,3 +150,16 @@
fsl,uart-has-rtscts;
status = "okay";
};
+
+&usbhost1 {
+ phy_type = "serial";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ phy_type = "utmi";
+ dr_mode = "otg";
+ external-vbus-divider;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
new file mode 100644
index 0000000..8d71552
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-pdk.dts
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx35.dtsi"
+
+/ {
+ model = "Freescale i.MX35 Product Development Kit";
+ compatible = "fsl,imx35-pdk", "fsl,imx35";
+
+ memory {
+ reg = <0x80000000 0x8000000>,
+ <0x90000000 0x8000000>;
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx35-pdk {
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000
+ MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5
+ MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5
+ MX35_PAD_CTS1__UART1_CTS 0x1c5
+ MX35_PAD_RTS1__UART1_RTS 0x1c5
+ >;
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <16>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 88b218f..4759abb 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -13,6 +13,7 @@
/ {
aliases {
+ ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -295,9 +296,9 @@
compatible = "fsl,imx35-usb", "fsl,imx27-usb";
reg = <0x53ff4000 0x0200>;
interrupts = <37>;
- clocks = <&clks 9>, <&clks 73>, <&clks 28>;
- clock-names = "ipg", "ahb", "per";
+ clocks = <&clks 73>;
fsl,usbmisc = <&usbmisc 0>;
+ fsl,usbphy = <&usbphy0>;
status = "disabled";
};
@@ -305,9 +306,9 @@
compatible = "fsl,imx35-usb", "fsl,imx27-usb";
reg = <0x53ff4400 0x0200>;
interrupts = <35>;
- clocks = <&clks 9>, <&clks 73>, <&clks 28>;
- clock-names = "ipg", "ahb", "per";
+ clocks = <&clks 73>;
fsl,usbmisc = <&usbmisc 1>;
+ fsl,usbphy = <&usbphy1>;
status = "disabled";
};
@@ -356,4 +357,20 @@
};
};
};
+
+ usbphy {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usb-phy@0 {
+ reg = <0>;
+ compatible = "usb-nop-xceiv";
+ };
+
+ usbphy1: usb-phy@1 {
+ reg = <1>;
+ compatible = "usb-nop-xceiv";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 9c89d1c..6a201cf 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -17,6 +17,7 @@
/ {
aliases {
+ ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 9e9deb2..6bc3243 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -17,10 +17,28 @@
model = "Freescale i.MX51 Babbage Board";
compatible = "fsl,imx51-babbage", "fsl,imx51";
+ chosen {
+ stdout-path = &uart1;
+ };
+
memory {
reg = <0x90000000 0x20000000>;
};
+ clocks {
+ ckih1 {
+ clock-frequency = <22579200>;
+ };
+
+ clk_26M: codec_clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ };
+ };
+
display0: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
@@ -82,11 +100,13 @@
gpio-keys {
compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
power {
label = "Power Button";
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
- linux,code = <116>; /* KEY_POWER */
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
};
@@ -102,6 +122,36 @@
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usbh1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1reg>;
+ reg = <0>;
+ regulator-name = "usbh1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usbotg_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotgreg>;
+ reg = <1>;
+ regulator-name = "usbotg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
sound {
compatible = "fsl,imx51-babbage-sgtl5000",
"fsl,imx-audio-sgtl5000";
@@ -116,41 +166,23 @@
mux-ext-port = <3>;
};
- clocks {
- ckih1 {
- clock-frequency = <22579200>;
- };
+ usbphy {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-bus";
- clk_26M: codec_clock {
- compatible = "fixed-clock";
- reg=<0>;
- #clock-cells = <0>;
- clock-frequency = <26000000>;
- gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ usbh1phy: usbh1phy@0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ clock-names = "main_clk";
};
};
};
-&esdhc1 {
+&audmux {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1>;
- fsl,cd-controller;
- fsl,wp-controller;
- status = "okay";
-};
-
-&esdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2>;
- cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
@@ -163,9 +195,9 @@
status = "okay";
pmic: mc13892@0 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "fsl,mc13892";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
spi-max-frequency = <6000000>;
spi-cs-high;
reg = <0>;
@@ -280,6 +312,53 @@
};
};
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ fsl,cd-controller;
+ fsl,wp-controller;
+ status = "okay";
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_clkcodec>;
+ reg = <0x0a>;
+ clocks = <&clk_26M>;
+ VDDA-supply = <&vdig_reg>;
+ VDDIO-supply = <&vvideo_reg>;
+ };
+};
+
&ipu_di0_disp0 {
remote-endpoint = <&display0_in>;
};
@@ -288,29 +367,74 @@
remote-endpoint = <&display1_in>;
};
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp>;
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_UP)
+ MATRIX_KEY(0, 1, KEY_DOWN)
+ MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0, 3, KEY_HOME)
+ MATRIX_KEY(1, 0, KEY_RIGHT)
+ MATRIX_KEY(1, 1, KEY_LEFT)
+ MATRIX_KEY(1, 2, KEY_ENTER)
+ MATRIX_KEY(1, 3, KEY_VOLUMEUP)
+ MATRIX_KEY(2, 0, KEY_F6)
+ MATRIX_KEY(2, 1, KEY_F8)
+ MATRIX_KEY(2, 2, KEY_F9)
+ MATRIX_KEY(2, 3, KEY_F10)
+ MATRIX_KEY(3, 0, KEY_F1)
+ MATRIX_KEY(3, 1, KEY_F2)
+ MATRIX_KEY(3, 2, KEY_F3)
+ MATRIX_KEY(3, 3, KEY_POWER)
+ >;
+ status = "okay";
+};
+
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
};
-&iomuxc {
+&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ vbus-supply = <®_usbh1_vbus>;
+ fsl,usbphy = <&usbh1phy>;
+ phy_type = "ulpi";
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "otg";
+ disable-over-current;
+ phy_type = "utmi_wide";
+ vbus-supply = <®_usbotg_vbus>;
+ status = "okay";
+};
+
+&iomuxc {
imx51-babbage {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX51_PAD_GPIO1_0__SD1_CD 0x20d5
- MX51_PAD_GPIO1_1__SD1_WP 0x20d5
- MX51_PAD_GPIO1_5__GPIO1_5 0x100
- MX51_PAD_GPIO1_6__GPIO1_6 0x100
- MX51_PAD_EIM_A27__GPIO2_21 0x5
- MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
- MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
- MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
- >;
- };
-
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
@@ -320,11 +444,19 @@
>;
};
+ pinctrl_clkcodec: clkcodecgrp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
+ >;
+ };
+
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */
+ MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */
>;
};
@@ -336,6 +468,8 @@
MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ MX51_PAD_GPIO1_0__SD1_CD 0x20d5
+ MX51_PAD_GPIO1_1__SD1_WP 0x20d5
>;
};
@@ -347,29 +481,38 @@
MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
+ MX51_PAD_GPIO1_5__GPIO1_5 0x100 /* WP */
+ MX51_PAD_GPIO1_6__GPIO1_6 0x100 /* CD */
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
- MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000
- MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000
- MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000
- MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000
- MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000
- MX51_PAD_EIM_CS5__FEC_CRS 0x80000000
- MX51_PAD_NANDF_RB2__FEC_COL 0x80000000
- MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000
- MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000
- MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000
- MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000
- MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000
- MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000
- MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000
- MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000
- MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000
- MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
- MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */
+ MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5
+ MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085
+ MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085
+ MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085
+ MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180
+ MX51_PAD_EIM_CS5__FEC_CRS 0x00000180
+ MX51_PAD_NANDF_RB2__FEC_COL 0x00000180
+ MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x00000180
+ MX51_PAD_NANDF_D9__FEC_RDATA0 0x00002180
+ MX51_PAD_NANDF_D8__FEC_TDATA0 0x00002004
+ MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004
+ MX51_PAD_NANDF_CS3__FEC_MDC 0x00002004
+ MX51_PAD_NANDF_CS4__FEC_TDATA1 0x00002004
+ MX51_PAD_NANDF_CS5__FEC_TDATA2 0x00002004
+ MX51_PAD_NANDF_CS6__FEC_TDATA3 0x00002004
+ MX51_PAD_NANDF_CS7__FEC_TX_EN 0x00002004
+ MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x00002180
+ MX51_PAD_NANDF_D11__FEC_RX_DV 0x000020a4
+ MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_A27__GPIO2_21 0x5
>;
};
@@ -379,6 +522,13 @@
>;
};
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX51_PAD_EIM_D19__I2C1_SCL 0x400001ed
+ MX51_PAD_EIM_D16__I2C1_SDA 0x400001ed
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
@@ -455,6 +605,12 @@
>;
};
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* IRQ */
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
@@ -479,71 +635,33 @@
MX51_PAD_EIM_D24__UART3_CTS 0x1c5
>;
};
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX51_PAD_USBH1_CLK__USBH1_CLK 0x80000000
+ MX51_PAD_USBH1_DIR__USBH1_DIR 0x80000000
+ MX51_PAD_USBH1_NXT__USBH1_NXT 0x80000000
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x80000000
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x80000000
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x80000000
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x80000000
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x80000000
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x80000000
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x80000000
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x80000000
+ >;
+ };
+
+ pinctrl_usbh1reg: usbh1reggrp {
+ fsl,pins = <
+ MX51_PAD_EIM_D21__GPIO2_5 0x85
+ >;
+ };
+
+ pinctrl_usbotgreg: usbotgreggrp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_7__GPIO1_7 0x85
+ >;
+ };
};
};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
- sgtl5000: codec@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clk_26M>;
- VDDA-supply = <&vdig_reg>;
- VDDIO-supply = <&vvideo_reg>;
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux>;
- status = "okay";
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec>;
- phy-mode = "mii";
- phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <1>;
- status = "okay";
-};
-
-&kpp {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_kpp>;
- linux,keymap = <
- MATRIX_KEY(0, 0, KEY_UP)
- MATRIX_KEY(0, 1, KEY_DOWN)
- MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
- MATRIX_KEY(0, 3, KEY_HOME)
- MATRIX_KEY(1, 0, KEY_RIGHT)
- MATRIX_KEY(1, 1, KEY_LEFT)
- MATRIX_KEY(1, 2, KEY_ENTER)
- MATRIX_KEY(1, 3, KEY_VOLUMEUP)
- MATRIX_KEY(2, 0, KEY_F6)
- MATRIX_KEY(2, 1, KEY_F8)
- MATRIX_KEY(2, 2, KEY_F9)
- MATRIX_KEY(2, 3, KEY_F10)
- MATRIX_KEY(3, 0, KEY_F1)
- MATRIX_KEY(3, 1, KEY_F2)
- MATRIX_KEY(3, 2, KEY_F3)
- MATRIX_KEY(3, 3, KEY_POWER)
- >;
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
new file mode 100644
index 0000000..1db517d
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx51-digi-connectcore-som.dtsi"
+
+/ {
+ model = "Digi ConnectCore CC(W)-MX51 JSK";
+ compatible = "digi,connectcore-ccxmx51-jsk",
+ "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+ chosen {
+ linux,stdout-path = &uart1;
+ };
+};
+
+&owire {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_owire>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ disable-over-current;
+ status = "okay";
+};
+
+&iomuxc {
+ imx51-digi-connectcore-jsk {
+ pinctrl_owire: owiregrp {
+ fsl,pins = <
+ MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x40000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
+ MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
+ MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+ MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5
+ MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5
+ MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5
+ MX51_PAD_USBH1_STP__USBH1_STP 0x1e5
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
new file mode 100644
index 0000000..321662f5
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -0,0 +1,377 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+ model = "Digi ConnectCore CC(W)-MX51";
+ compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+ memory {
+ reg = <0x90000000 0x08000000>;
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ pmic: mc13892@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mc13892>;
+ compatible = "fsl,mc13892";
+ spi-max-frequency = <16000000>;
+ spi-cs-high;
+ reg = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,mc13xxx-uses-rtc;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst { };
+
+ viohi_reg: viohi {
+ regulator-always-on;
+ };
+
+ vpll_reg: vpll {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdig_reg: vdig {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ };
+
+ vsd_reg: vsd {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vusb2_reg: vusb2 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2600000>;
+ regulator-always-on;
+ };
+
+ vvideo_reg: vvideo {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-always-on;
+ };
+
+ vaudio_reg: vaudio {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vcam_reg: vcam {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vusb_reg: vusb {
+ regulator-always-on;
+ };
+
+ gpo1_reg: gpo1 { };
+
+ gpo2_reg: gpo2 { };
+
+ gpo3_reg: gpo3 { };
+
+ gpo4_reg: gpo4 { };
+
+ pwgt2spi_reg: pwgt2spi {
+ regulator-always-on;
+ };
+
+ vcoincell_reg: vcoincell {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ cap-sdio-irq;
+ enable-sdio-wakeup;
+ keep-power-in-suspend;
+ max-frequency = <50000000>;
+ no-1-8-v;
+ non-removable;
+ vmmc-supply = <&gpo4_reg>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "mii";
+ phy-supply = <&gpo3_reg>;
+ /* Pins shared with LCD2, keep status disabled */
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ mma7455l@1d {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mma7455l>;
+ compatible = "fsl,mma7455l";
+ reg = <0x1d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&usbotg {
+ phy_type = "utmi_wide";
+ disable-over-current;
+ /* Device role is not known, keep status disabled */
+};
+
+&weim {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_weim>;
+ status = "okay";
+
+ lan9221: lan9221@5,0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lan9221>;
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ reg = <5 0x00000000 0x1000>;
+ fsl,weim-cs-timing = <
+ 0x00420081 0x00000000
+ 0x32260000 0x00000000
+ 0x72080f00 0x00000000
+ >;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ phy-mode = "mii";
+ reg-io-width = <2>;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&gpo2_reg>;
+ vddvario-supply = <&gpo2_reg>;
+ };
+};
+
+&iomuxc {
+ imx51-digi-connectcore-som {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
+ MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
+ MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
+ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
+ MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
+ MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
+ MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
+ MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
+ MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
+ MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
+ MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
+ MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
+ MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
+ MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
+ MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
+ MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
+ MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
+ MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed
+ MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX51_PAD_NANDF_D0__NANDF_D0 0x80000000
+ MX51_PAD_NANDF_D1__NANDF_D1 0x80000000
+ MX51_PAD_NANDF_D2__NANDF_D2 0x80000000
+ MX51_PAD_NANDF_D3__NANDF_D3 0x80000000
+ MX51_PAD_NANDF_D4__NANDF_D4 0x80000000
+ MX51_PAD_NANDF_D5__NANDF_D5 0x80000000
+ MX51_PAD_NANDF_D6__NANDF_D6 0x80000000
+ MX51_PAD_NANDF_D7__NANDF_D7 0x80000000
+ MX51_PAD_NANDF_ALE__NANDF_ALE 0x80000000
+ MX51_PAD_NANDF_CLE__NANDF_CLE 0x80000000
+ MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x80000000
+ MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x80000000
+ MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x80000000
+ MX51_PAD_NANDF_CS0__NANDF_CS0 0x80000000
+ MX51_PAD_NANDF_RB0__NANDF_RB0 0x80000000
+ >;
+ };
+
+ pinctrl_lan9221: lan9221grp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_9__GPIO1_9 0xe5 /* IRQ */
+ >;
+ };
+
+ pinctrl_mc13892: mc13892grp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_5__GPIO1_5 0xe5 /* IRQ */
+ >;
+ };
+
+ pinctrl_mma7455l: mma7455lgrp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_7__GPIO1_7 0xe5 /* IRQ1 */
+ MX51_PAD_GPIO1_6__GPIO1_6 0xe5 /* IRQ2 */
+ >;
+ };
+
+ pinctrl_weim: weimgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_DA0__EIM_DA0 0x80000000
+ MX51_PAD_EIM_DA1__EIM_DA1 0x80000000
+ MX51_PAD_EIM_DA2__EIM_DA2 0x80000000
+ MX51_PAD_EIM_DA3__EIM_DA3 0x80000000
+ MX51_PAD_EIM_DA4__EIM_DA4 0x80000000
+ MX51_PAD_EIM_DA5__EIM_DA5 0x80000000
+ MX51_PAD_EIM_DA6__EIM_DA6 0x80000000
+ MX51_PAD_EIM_DA7__EIM_DA7 0x80000000
+ MX51_PAD_EIM_DA8__EIM_DA8 0x80000000
+ MX51_PAD_EIM_DA9__EIM_DA9 0x80000000
+ MX51_PAD_EIM_DA10__EIM_DA10 0x80000000
+ MX51_PAD_EIM_DA11__EIM_DA11 0x80000000
+ MX51_PAD_EIM_DA12__EIM_DA12 0x80000000
+ MX51_PAD_EIM_DA13__EIM_DA13 0x80000000
+ MX51_PAD_EIM_DA14__EIM_DA14 0x80000000
+ MX51_PAD_EIM_DA15__EIM_DA15 0x80000000
+ MX51_PAD_EIM_A16__EIM_A16 0x80000000
+ MX51_PAD_EIM_A17__EIM_A17 0x80000000
+ MX51_PAD_EIM_A18__EIM_A18 0x80000000
+ MX51_PAD_EIM_A19__EIM_A19 0x80000000
+ MX51_PAD_EIM_A20__EIM_A20 0x80000000
+ MX51_PAD_EIM_A21__EIM_A21 0x80000000
+ MX51_PAD_EIM_A22__EIM_A22 0x80000000
+ MX51_PAD_EIM_A23__EIM_A23 0x80000000
+ MX51_PAD_EIM_A24__EIM_A24 0x80000000
+ MX51_PAD_EIM_A25__EIM_A25 0x80000000
+ MX51_PAD_EIM_A26__EIM_A26 0x80000000
+ MX51_PAD_EIM_A27__EIM_A27 0x80000000
+ MX51_PAD_EIM_D16__EIM_D16 0x80000000
+ MX51_PAD_EIM_D17__EIM_D17 0x80000000
+ MX51_PAD_EIM_D18__EIM_D18 0x80000000
+ MX51_PAD_EIM_D19__EIM_D19 0x80000000
+ MX51_PAD_EIM_D20__EIM_D20 0x80000000
+ MX51_PAD_EIM_D21__EIM_D21 0x80000000
+ MX51_PAD_EIM_D22__EIM_D22 0x80000000
+ MX51_PAD_EIM_D23__EIM_D23 0x80000000
+ MX51_PAD_EIM_D24__EIM_D24 0x80000000
+ MX51_PAD_EIM_D25__EIM_D25 0x80000000
+ MX51_PAD_EIM_D26__EIM_D26 0x80000000
+ MX51_PAD_EIM_D27__EIM_D27 0x80000000
+ MX51_PAD_EIM_D28__EIM_D28 0x80000000
+ MX51_PAD_EIM_D29__EIM_D29 0x80000000
+ MX51_PAD_EIM_D30__EIM_D30 0x80000000
+ MX51_PAD_EIM_D31__EIM_D31 0x80000000
+ MX51_PAD_EIM_OE__EIM_OE 0x80000000
+ MX51_PAD_EIM_DTACK__EIM_DTACK 0x80000000
+ MX51_PAD_EIM_LBA__EIM_LBA 0x80000000
+ MX51_PAD_EIM_CS5__EIM_CS5 0x80000000 /* CS5 */
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
index 9b3acf6..6316426 100644
--- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
+++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
@@ -42,6 +42,17 @@
compatible = "nxp,pcf8563";
reg = <0x51>;
};
+
+ tsc2007: tsc2007@49 {
+ compatible = "ti,tsc2007";
+ gpios = <&gpio4 0 1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <0x0 0x8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc2007_1>;
+ reg = <0x49>;
+ ti,x-plate-ohms = <180>;
+ };
};
&iomuxc {
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index 5cec4f3..75e66c9 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -24,6 +24,14 @@
model = "Eukrea CPUIMX51";
compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+ clocks {
+ clk24M: can_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+ };
+
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -50,6 +58,23 @@
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_can: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "CAN_RST";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <20000>;
+ enable-active-high;
+ };
+ };
+
sound {
compatible = "eukrea,asoc-tlv320";
eukrea,model = "imx51-eukrea-tlv320aic23";
@@ -57,6 +82,20 @@
fsl,mux-int-port = <2>;
fsl,mux-ext-port = <3>;
};
+
+ usbphy {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-bus";
+
+ usbh1phy: usbh1phy@0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+ clock-names = "main_clk";
+ clock-frequency = <19200000>;
+ };
+ };
};
&audmux {
@@ -72,6 +111,26 @@
status = "okay";
};
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ can0: can@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can>;
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk24M>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <®_can>;
+ };
+};
+
&i2c1 {
tlv320aic23: codec@1a {
compatible = "ti,tlv320aic23";
@@ -90,6 +149,23 @@
>;
};
+
+ pinctrl_can: cangrp {
+ fsl,pins = <
+ MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x80000000 /* nReset */
+ MX51_PAD_GPIO1_1__GPIO1_1 0x80000000 /* IRQ */
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ MX51_PAD_CSPI1_SS0__GPIO4_24 0x80000000 /* CS0 */
+ >;
+ };
+
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
@@ -151,6 +227,29 @@
MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
>;
};
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5
+ MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5
+ MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5
+ MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+ MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+ MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+ MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+ MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+ MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+ MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+ MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+ MX51_PAD_USBH1_STP__USBH1_STP 0x1e5
+ >;
+ };
+
+ pinctrl_usbh1_vbus: usbh1-vbusgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
+ >;
+ };
};
};
@@ -173,3 +272,24 @@
fsl,uart-has-rtscts;
status = "okay";
};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ fsl,usbphy = <&usbh1phy>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ status = "okay";
+};
+
+&usbphy0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_vbus>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 150bb4e..bebbf3b 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -19,6 +19,7 @@
/ {
aliases {
+ ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -537,6 +538,8 @@
};
nfc: nand@83fdb000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,imx51-nand";
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
interrupts = <8>;
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 7c8c129..3f2400b 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -17,6 +17,10 @@
model = "TQ MBa53 starter kit";
compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+ chosen {
+ stdout-path = &uart2;
+ };
+
backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 50000>;
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index ede04fa..fd8c60d 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -13,6 +13,10 @@
#include "imx53.dtsi"
/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
memory {
reg = <0x70000000 0x20000000>,
<0xb0000000 0x20000000>;
@@ -272,6 +276,14 @@
>;
};
+ pinctrl_vga_sync: vgasync-grp {
+ fsl,pins = <
+ /* VGA_HSYNC, VSYNC with max drive strength */
+ MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+ MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
@@ -281,6 +293,15 @@
};
};
+&tve {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vga_sync>;
+ fsl,tve-mode = "vga";
+ fsl,hsync-pin = <4>;
+ fsl,vsync-pin = <6>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 9c2bff2..375e66f 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -18,6 +18,7 @@
/ {
aliases {
+ ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -726,8 +727,8 @@
clocks = <&clks IMX5_CLK_VPU_GATE>,
<&clks IMX5_CLK_VPU_GATE>;
clock-names = "per", "ahb";
+ resets = <&src 1>;
iram = <&ocram>;
- status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index 5bfae54..5373a5f2 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -11,6 +11,10 @@
model = "SolidRun HummingBoard DL/Solo";
compatible = "solidrun,hummingboard", "fsl,imx6dl";
+ chosen {
+ stdout-path = &uart1;
+ };
+
ir_recv: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio1 2 1>;
@@ -67,6 +71,13 @@
status = "okay";
};
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
@@ -82,6 +93,13 @@
*/
};
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
+ status = "okay";
+};
+
&iomuxc {
hummingboard {
pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
@@ -97,6 +115,12 @@
>;
};
+ pinctrl_hummingboard_hdmi: hummingboard-hdmi {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
@@ -104,6 +128,13 @@
>;
};
+ pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
pinctrl_hummingboard_spdif: hummingboard-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
new file mode 100644
index 0000000..08e9780
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
+
+/ {
+ model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board";
+ compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
new file mode 100644
index 0000000..964bc2a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-pfla02.dtsi"
+
+/ {
+ model = "Phytec phyFLEX-i.MX6 DualLite/Solo";
+ compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
new file mode 100644
index 0000000..909fafc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -0,0 +1,539 @@
+/*
+ * Copyright 2014 Iain Paton <ipaton0@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "RIoTboard i.MX6S";
+ compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6-riotboard-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 31 0>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ pmic: pf0100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 8>;
+
+ regulators {
+ reg_vddcore: sw1ab { /* VDDARM_IN */
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ reg_vddsoc: sw1c { /* VDDSOC_IN */
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ reg_gen_3v3: sw2 { /* VDDHIGH_IN */
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_ddr_1v5a: sw3a { /* NVCC_DRAM, NVCC_RGMII */
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ reg_ddr_1v5b: sw3b { /* NVCC_DRAM, NVCC_RGMII */
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ reg_ddr_vtt: sw4 { /* MIPI conn */
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ reg_5v_600mA: swbst { /* not used */
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ reg_snvs_3v: vsnvs { /* VDD_SNVS_IN */
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr { /* VREF_DDR */
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vgen1_1v5: vgen1 { /* not used */
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ reg_vgen2_1v2_eth: vgen2 { /* pcie ? */
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ reg_vgen3_2v8: vgen3 { /* not used */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ reg_vgen4_1v8: vgen4 { /* NVCC_SD3 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen5_2v5_sgtl: vgen5 { /* Pwr LED & 5V0_delayed enable */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen6_3v3: vgen6 { /* #V#_DELAYED enable, MIPI */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ clocks = <&clks 116>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbh1 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 4 0>;
+ wp-gpios = <&gpio1 2 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 0>;
+ wp-gpios = <&gpio7 1 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ vmmc-supply = <®_3p3v>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ imx6-riotboard {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x8000000
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x8000000
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x8000000
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x8000000
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x000b1 /* CS0 */
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x000b1 /* CS1 */
+ MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 /* CS0 */
+ MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 /* CS0 */
+ MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x000b1 /* CS1 */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 /* AR8035 pin strapping: IO voltage: pull up */
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 /* AR8035 pin strapping: PHYADDR#0: pull down */
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 /* AR8035 pin strapping: PHYADDR#1: pull down */
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 /* AR8035 pin strapping: MODE#1: pull up */
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 /* AR8035 pin strapping: MODE#3: pull up */
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 /* GPIO16 -> AR8035 25MHz */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* AR8035 interrupt */
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* user led0 */
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 /* user led1 */
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x80000000
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* SD2 CD */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* SD2 WP */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3 CD */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x80000000 /* SD3 WP */
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 /* SD4 RST (eMMC) */
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 5c5f574..0a9c49d 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -84,9 +84,10 @@
i2c4: i2c@021f8000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx1-i2c";
+ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021f8000 0x4000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 116>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index e4ae38f..e030263 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -18,6 +18,10 @@
model = "Data Modul eDM-QMX6 Board";
compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+ chosen {
+ stdout-path = &uart2;
+ };
+
aliases {
gpio7 = &stmpe_gpio1;
gpio8 = &stmpe_gpio2;
@@ -91,6 +95,20 @@
};
};
+&ecspi5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi5>;
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio1 12 0>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "m25p80";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -105,7 +123,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2
&pinctrl_stmpe1
- &pinctrl_stmpe2>;
+ &pinctrl_stmpe2
+ &pinctrl_pfuze>;
status = "okay";
pmic: pfuze100@08 {
@@ -216,6 +235,8 @@
reg = <0x40>;
interrupts = <30 0>;
interrupt-parent = <&gpio3>;
+ vcc-supply = <&sw2_reg>;
+ vio-supply = <&sw2_reg>;
stmpe_gpio1: stmpe_gpio {
#gpio-cells = <2>;
@@ -228,6 +249,8 @@
reg = <0x44>;
interrupts = <2 0>;
interrupt-parent = <&gpio5>;
+ vcc-supply = <&sw2_reg>;
+ vio-supply = <&sw2_reg>;
stmpe_gpio2: stmpe_gpio {
#gpio-cells = <2>;
@@ -263,6 +286,15 @@
>;
};
+ pinctrl_ecspi5: ecspi5rp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
+ MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
+ MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
@@ -291,6 +323,12 @@
>;
};
+ pinctrl_pfuze: pfuze100grp1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
+ >;
+ };
+
pinctrl_stmpe1: stmpe1grp {
fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 4a9b4dc..703539c 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -14,7 +14,7 @@
compatible = "zealz,imx6q-gk802", "fsl,imx6q";
chosen {
- linux,stdout-path = &uart4;
+ stdout-path = &uart4;
};
memory {
@@ -48,6 +48,11 @@
};
};
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
/* Internal I2C */
&i2c2 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index e51bb3f..3689eaa 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -157,6 +157,11 @@
status = "okay";
};
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
index 5607c33..c139ac0 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
@@ -11,40 +11,17 @@
/dts-v1/;
#include "imx6q-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
/ {
model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
-};
-&fec {
- status = "okay";
-};
-
-&gpmi {
- status = "okay";
+ chosen {
+ stdout-path = &uart4;
+ };
};
&sata {
- status = "okay";
-};
-
-&uart4 {
- status = "okay";
-};
-
-&usbh1 {
- status = "okay";
-};
-
-&usbotg {
- status = "okay";
-};
-
-&usdhc2 {
- status = "okay";
-};
-
-&usdhc3 {
- status = "okay";
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
index 324f155..cd20d0a 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -10,316 +10,13 @@
*/
#include "imx6q.dtsi"
+#include "imx6qdl-phytec-pfla02.dtsi"
/ {
- model = "Phytec phyFLEX-i.MX6 Ouad";
+ model = "Phytec phyFLEX-i.MX6 Quad";
compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
memory {
reg = <0x10000000 0x80000000>;
};
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb_otg_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 15 0>;
- };
-
- reg_usb_h1_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 0 0>;
- };
- };
-};
-
-&ecspi3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi3>;
- status = "okay";
- fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio4 24 0>;
-
- flash@0 {
- compatible = "m25p80";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c32";
- reg = <0x50>;
- };
-
- pmic@58 {
- compatible = "dialog,da9063";
- reg = <0x58>;
- interrupt-parent = <&gpio4>;
- interrupts = <17 0x8>; /* active-low GPIO4_17 */
-
- regulators {
- vddcore_reg: bcore1 {
- regulator-min-microvolt = <730000>;
- regulator-max-microvolt = <1380000>;
- regulator-always-on;
- };
-
- vddsoc_reg: bcore2 {
- regulator-min-microvolt = <730000>;
- regulator-max-microvolt = <1380000>;
- regulator-always-on;
- };
-
- vdd_ddr3_reg: bpro {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- };
-
- vdd_3v3_reg: bperi {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_buckmem_reg: bmem {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_eth_reg: bio {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vdd_eth_io_reg: ldo4 {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- vdd_mx6_snvs_reg: ldo5 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- vdd_3v3_pmic_io_reg: ldo6 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_sd0_reg: ldo9 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vdd_sd1_reg: ldo10 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vdd_mx6_high_reg: ldo11 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- imx6q-phytec-pfla02 {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
- MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
- MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */
- >;
- };
-
- pinctrl_ecspi3: ecspi3grp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
- MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
- MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
- >;
- };
-
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
- >;
- };
-
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
- >;
- };
-
- pinctrl_usbh1: usbh1grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000
- >;
- };
-
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc3_cdwp: usdhc3cdwp {
- fsl,pins = <
- MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
- >;
- };
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 23 0>;
- status = "disabled";
-};
-
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- nand-on-flash-bbt;
- status = "disabled";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
- status = "disabled";
-};
-
-&usbh1 {
- vbus-supply = <®_usb_h1_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1>;
- status = "disabled";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
- disable-over-current;
- status = "disabled";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio1 4 0>;
- wp-gpios = <&gpio1 2 0>;
- status = "disabled";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3
- &pinctrl_usdhc3_cdwp>;
- cd-gpios = <&gpio1 27 0>;
- wp-gpios = <&gpio1 29 0>;
- status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
index ed397d1..6c56106 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -16,6 +16,10 @@
model = "Udoo i.MX6 Quad Board";
compatible = "udoo,imx6q-udoo", "fsl,imx6q";
+ chosen {
+ stdout-path = &uart2;
+ };
+
memory {
reg = <0x10000000 0x40000000>;
};
@@ -28,6 +32,18 @@
status = "okay";
};
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
&iomuxc {
imx6q-udoo {
pinctrl_enet: enetgrp {
@@ -51,6 +67,13 @@
>;
};
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index c2a2488..25da82a 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -55,6 +55,20 @@
};
};
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
+ status = "okay";
+};
+
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
@@ -69,6 +83,19 @@
&iomuxc {
cubox_i {
+ pinctrl_cubox_i_hdmi: cubox-i-hdmi {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
fsl,pins = <
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 25cf035..2c253d6 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -22,7 +22,7 @@
};
chosen {
- linux,stdout-path = &uart1;
+ stdout-path = &uart1;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 98a4221..31665ad 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -101,6 +101,11 @@
status = "okay";
};
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 035d3a8..367af3e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -27,6 +27,13 @@
bootargs = "console=ttymxc1,115200";
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+
leds {
compatible = "gpio-leds";
@@ -148,6 +155,11 @@
status = "okay";
};
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -394,6 +406,12 @@
>;
};
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
@@ -436,6 +454,27 @@
&ldb {
status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
};
&pcie {
@@ -443,6 +482,12 @@
status = "okay";
};
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index c8e5ae0..c91b5a6 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -30,6 +30,13 @@
bootargs = "console=ttymxc1,115200";
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+
leds {
compatible = "gpio-leds";
@@ -157,6 +164,11 @@
status = "okay";
};
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -434,6 +446,12 @@
>;
};
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
@@ -508,6 +526,12 @@
};
};
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 2795dfc..698d306 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -30,6 +30,13 @@
bootargs = "console=ttymxc1,115200";
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+
leds {
compatible = "gpio-leds";
@@ -147,6 +154,11 @@
status = "okay";
};
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -456,6 +468,12 @@
>;
};
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
@@ -530,6 +548,12 @@
};
};
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 99be301..4c4b175 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -14,6 +14,10 @@
#include <dt-bindings/input/input.h>
/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
memory {
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
new file mode 100644
index 0000000..5847212
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ chosen {
+ linux,stdout-path = &uart4;
+ };
+};
+
+&fec {
+ status = "okay";
+};
+
+&gpmi {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ tlv320@18 {
+ compatible = "ti,tlv320aic3x";
+ reg = <0x18>;
+ };
+
+ stmpe@41 {
+ compatible = "st,stmpe811";
+ reg = <0x41>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,rtc8564";
+ reg = <0x51>;
+ };
+
+ adc@64 {
+ compatible = "maxim,max1037";
+ reg = <0x64>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc2 {
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
new file mode 100644
index 0000000..faa3494
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -0,0 +1,356 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Phytec phyFLEX-i.MX6 Ouad";
+ compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 15 0>;
+ };
+
+ reg_usb_h1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 0 0>;
+ };
+ };
+
+ gpio_leds: leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "phyflex:green";
+ gpios = <&gpio1 30 0>;
+ };
+
+ red {
+ label = "phyflex:red";
+ gpios = <&gpio2 31 0>;
+ };
+ };
+};
+
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 24 0>;
+
+ flash@0 {
+ compatible = "m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ pmic@58 {
+ compatible = "dialog,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <17 0x8>; /* active-low GPIO4_17 */
+
+ regulators {
+ vddcore_reg: bcore1 {
+ regulator-min-microvolt = <730000>;
+ regulator-max-microvolt = <1380000>;
+ regulator-always-on;
+ };
+
+ vddsoc_reg: bcore2 {
+ regulator-min-microvolt = <730000>;
+ regulator-max-microvolt = <1380000>;
+ regulator-always-on;
+ };
+
+ vdd_ddr3_reg: bpro {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: bperi {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_buckmem_reg: bmem {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_eth_reg: bio {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd_eth_io_reg: ldo4 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_mx6_snvs_reg: ldo5 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_pmic_io_reg: ldo6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_sd0_reg: ldo9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_sd1_reg: ldo10 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_mx6_high_reg: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-phytec-pfla02 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_cdwp: usdhc3cdwp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+ >;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "disabled";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "disabled";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ status = "disabled";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "disabled";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 4 0>;
+ wp-gpios = <&gpio1 2 0>;
+ status = "disabled";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3
+ &pinctrl_usdhc3_cdwp>;
+ cd-gpios = <&gpio1 27 0>;
+ wp-gpios = <&gpio1 29 0>;
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 3bec128..6df6127 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -13,6 +13,10 @@
#include <dt-bindings/input/input.h>
/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
memory {
reg = <0x10000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 0d816d3..40ea365 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -14,6 +14,10 @@
#include <dt-bindings/input/input.h>
/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
memory {
reg = <0x10000000 0x40000000>;
};
@@ -105,6 +109,17 @@
default-brightness-level = <7>;
status = "okay";
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ red {
+ gpios = <&gpio1 2 0>;
+ default-state = "on";
+ };
+ };
};
&audmux {
@@ -137,6 +152,11 @@
status = "okay";
};
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -373,6 +393,12 @@
>;
};
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -421,6 +447,29 @@
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>;
};
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+ };
+
+ gpio_leds {
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
+ >;
+ };
};
};
@@ -449,6 +498,13 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio7 12 0>;
+ status = "okay";
+};
+
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
@@ -496,3 +552,12 @@
wp-gpios = <&gpio2 1 0>;
status = "okay";
};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index bdfdf89..5c6f10c 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -62,6 +62,18 @@
status = "okay";
};
+&hdmi {
+ ddc-i2c-bus = <&i2c1>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -127,6 +139,13 @@
>;
};
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index eca0971..ce05991 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -16,6 +16,7 @@
/ {
aliases {
+ ethernet0 = &fec;
can0 = &can1;
can1 = &can2;
gpio0 = &gpio1;
@@ -140,15 +141,16 @@
0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
- interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
- clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
+ clocks = <&clks 144>, <&clks 206>, <&clks 189>;
+ clock-names = "pcie", "pcie_bus", "pcie_phy";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index d26b099..2d4e528 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -14,6 +14,7 @@
/ {
aliases {
+ ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts
index 74b3b63..c568f06 100644
--- a/arch/arm/boot/dts/k2e-evm.dts
+++ b/arch/arm/boot/dts/k2e-evm.dts
@@ -58,3 +58,84 @@
&usb1 {
status = "okay";
};
+
+&i2c0 {
+ dtt@50 {
+ compatible = "at,24c1024";
+ reg = <0x50>;
+ };
+};
+
+&aemif {
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <0>;
+ /* all timings in nanoseconds */
+ ti,cs-min-turnaround-ns = <12>;
+ ti,cs-read-hold-ns = <6>;
+ ti,cs-read-strobe-ns = <23>;
+ ti,cs-read-setup-ns = <9>;
+ ti,cs-write-hold-ns = <8>;
+ ti,cs-write-strobe-ns = <23>;
+ ti,cs-write-setup-ns = <8>;
+
+ nand@0,0 {
+ compatible = "ti,keystone-nand","ti,davinci-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x4000000
+ 1 0 0x0000100>;
+
+ ti,davinci-chipselect = <0>;
+ ti,davinci-mask-ale = <0x2000>;
+ ti,davinci-mask-cle = <0x4000>;
+ ti,davinci-mask-chipsel = <0>;
+ nand-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "params";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "ubifs";
+ reg = <0x180000 0x1FE80000>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ nor_flash: n25q128a11@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "Micron,n25q128a11";
+ spi-max-frequency = <54000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "misc";
+ reg = <0x80000 0xf80000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts
index c93d06f..1f90cbf 100644
--- a/arch/arm/boot/dts/k2hk-evm.dts
+++ b/arch/arm/boot/dts/k2hk-evm.dts
@@ -138,3 +138,32 @@
};
};
};
+
+&i2c0 {
+ dtt@50 {
+ compatible = "at,24c1024";
+ reg = <0x50>;
+ };
+};
+
+&spi0 {
+ nor_flash: n25q128a11@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "Micron,n25q128a11";
+ spi-max-frequency = <54000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "misc";
+ reg = <0x80000 0xf80000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts
index 50a7013..fec4312 100644
--- a/arch/arm/boot/dts/k2l-evm.dts
+++ b/arch/arm/boot/dts/k2l-evm.dts
@@ -35,3 +35,84 @@
&usb {
status = "okay";
};
+
+&i2c0 {
+ dtt@50 {
+ compatible = "at,24c1024";
+ reg = <0x50>;
+ };
+};
+
+&aemif {
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <0>;
+ /* all timings in nanoseconds */
+ ti,cs-min-turnaround-ns = <12>;
+ ti,cs-read-hold-ns = <6>;
+ ti,cs-read-strobe-ns = <23>;
+ ti,cs-read-setup-ns = <9>;
+ ti,cs-write-hold-ns = <8>;
+ ti,cs-write-strobe-ns = <23>;
+ ti,cs-write-setup-ns = <8>;
+
+ nand@0,0 {
+ compatible = "ti,keystone-nand","ti,davinci-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x4000000
+ 1 0 0x0000100>;
+
+ ti,davinci-chipselect = <0>;
+ ti,davinci-mask-ale = <0x2000>;
+ ti,davinci-mask-cle = <0x4000>;
+ ti,davinci-mask-chipsel = <0>;
+ nand-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "params";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "ubifs";
+ reg = <0x180000 0x7FE80000>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ nor_flash: n25q128a11@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "Micron,n25q128a11";
+ spi-max-frequency = <54000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "misc";
+ reg = <0x80000 0xf80000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 90823eb..d9f99e7 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -28,8 +28,6 @@
gic: interrupt-controller {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
- #size-cells = <0>;
- #address-cells = <1>;
interrupt-controller;
reg = <0x0 0x02561000 0x0 0x1000>,
<0x0 0x02562000 0x0 0x2000>,
@@ -66,6 +64,7 @@
compatible = "ti,keystone","simple-bus";
interrupt-parent = <&gic>;
ranges = <0x0 0x0 0x0 0xc0000000>;
+ dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
rstctrl: reset-controller {
compatible = "ti,keystone-reset";
@@ -102,11 +101,6 @@
interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
-
- dtt@50 {
- compatible = "at,24c1024";
- reg = <0x50>;
- };
};
i2c1: i2c@2530400 {
@@ -115,6 +109,8 @@
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c2: i2c@2530800 {
@@ -123,6 +119,8 @@
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spi0: spi@21000400 {
@@ -132,6 +130,8 @@
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spi1: spi@21000600 {
@@ -141,6 +141,8 @@
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spi2: spi@21000800 {
@@ -150,6 +152,8 @@
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usb_phy: usb_phy@2620738 {
@@ -169,6 +173,8 @@
clock-names = "usb";
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
ranges;
+ dma-coherent;
+ dma-ranges;
status = "disabled";
dwc3@2690000 {
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
index 3916937..dd81508 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -1,6 +1,6 @@
/ {
mbus {
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
@@ -15,7 +15,7 @@
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
- pcie@1,0 {
+ pcie0: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -35,16 +35,9 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
compatible = "marvell,88f6192-pinctrl";
- reg = <0x10000 0x20>;
- pmx_nand: pmx-nand {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp18",
- "mpp19";
- marvell,function = "nand";
- };
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp5", "mpp21", "mpp23";
marvell,function = "sata0";
@@ -53,22 +46,6 @@
marvell,pins = "mpp4", "mpp20", "mpp22";
marvell,function = "sata1";
};
- pmx_spi: pmx-spi {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
- marvell,function = "spi";
- };
- pmx_twsi0: pmx-twsi0 {
- marvell,pins = "mpp8", "mpp9";
- marvell,function = "twsi0";
- };
- pmx_uart0: pmx-uart0 {
- marvell,pins = "mpp10", "mpp11";
- marvell,function = "uart0";
- };
- pmx_uart1: pmx-uart1 {
- marvell,pins = "mpp13", "mpp14";
- marvell,function = "uart1";
- };
pmx_sdio: pmx-sdio {
marvell,pins = "mpp12", "mpp13", "mpp14",
"mpp15", "mpp16", "mpp17";
@@ -76,14 +53,14 @@
};
};
- rtc@10300 {
+ rtc: rtc@10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
- sata@80000 {
+ sata: sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
@@ -92,7 +69,7 @@
status = "disabled";
};
- mvsdio@90000 {
+ sdio: mvsdio@90000 {
compatible = "marvell,orion-sdio";
reg = <0x90000 0x200>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 416d96e..7dc7d67 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -1,6 +1,6 @@
/ {
mbus {
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
@@ -15,7 +15,7 @@
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
- pcie@1,0 {
+ pcie0: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -35,16 +35,9 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
compatible = "marvell,88f6281-pinctrl";
- reg = <0x10000 0x20>;
- pmx_nand: pmx-nand {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp18",
- "mpp19";
- marvell,function = "nand";
- };
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp5", "mpp21", "mpp23";
marvell,function = "sata0";
@@ -53,22 +46,6 @@
marvell,pins = "mpp4", "mpp20", "mpp22";
marvell,function = "sata1";
};
- pmx_spi: pmx-spi {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
- marvell,function = "spi";
- };
- pmx_twsi0: pmx-twsi0 {
- marvell,pins = "mpp8", "mpp9";
- marvell,function = "twsi0";
- };
- pmx_uart0: pmx-uart0 {
- marvell,pins = "mpp10", "mpp11";
- marvell,function = "uart0";
- };
- pmx_uart1: pmx-uart1 {
- marvell,pins = "mpp13", "mpp14";
- marvell,function = "uart1";
- };
pmx_sdio: pmx-sdio {
marvell,pins = "mpp12", "mpp13", "mpp14",
"mpp15", "mpp16", "mpp17";
@@ -76,14 +53,14 @@
};
};
- rtc@10300 {
+ rtc: rtc@10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
- sata@80000 {
+ sata: sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
@@ -94,7 +71,7 @@
status = "disabled";
};
- mvsdio@90000 {
+ sdio: mvsdio@90000 {
compatible = "marvell,orion-sdio";
reg = <0x90000 0x200>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 2902e0d..4680eec 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -1,6 +1,6 @@
/ {
mbus {
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
@@ -19,7 +19,7 @@
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>;
- pcie@1,0 {
+ pcie0: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -36,7 +36,7 @@
status = "disabled";
};
- pcie@2,0 {
+ pcie1: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
@@ -56,15 +56,8 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
compatible = "marvell,88f6282-pinctrl";
- reg = <0x10000 0x20>;
-
- pmx_nand: pmx-nand {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp18", "mpp19";
- marvell,function = "nand";
- };
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp5", "mpp21", "mpp23";
@@ -74,29 +67,16 @@
marvell,pins = "mpp4", "mpp20", "mpp22";
marvell,function = "sata1";
};
- pmx_spi: pmx-spi {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
- marvell,function = "spi";
- };
- pmx_twsi0: pmx-twsi0 {
- marvell,pins = "mpp8", "mpp9";
- marvell,function = "twsi0";
- };
+ /*
+ * Default I2C1 pinctrl setting on mpp36/mpp37,
+ * overwrite marvell,pins on board level if required.
+ */
pmx_twsi1: pmx-twsi1 {
marvell,pins = "mpp36", "mpp37";
marvell,function = "twsi1";
};
- pmx_uart0: pmx-uart0 {
- marvell,pins = "mpp10", "mpp11";
- marvell,function = "uart0";
- };
-
- pmx_uart1: pmx-uart1 {
- marvell,pins = "mpp13", "mpp14";
- marvell,function = "uart1";
- };
pmx_sdio: pmx-sdio {
marvell,pins = "mpp12", "mpp13", "mpp14",
"mpp15", "mpp16", "mpp17";
@@ -104,20 +84,20 @@
};
};
- thermal@10078 {
+ thermal: thermal@10078 {
compatible = "marvell,kirkwood-thermal";
reg = <0x10078 0x4>;
status = "okay";
};
- rtc@10300 {
+ rtc: rtc@10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
- i2c@11100 {
+ i2c1: i2c@11100 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11100 0x20>;
#address-cells = <1>;
@@ -125,10 +105,12 @@
interrupts = <32>;
clock-frequency = <100000>;
clocks = <&gate_clk 7>;
+ pinctrl-0 = <&pmx_twsi1>;
+ pinctrl-names = "default";
status = "disabled";
};
- sata@80000 {
+ sata: sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
@@ -139,7 +121,7 @@
status = "disabled";
};
- mvsdio@90000 {
+ sdio: mvsdio@90000 {
compatible = "marvell,orion-sdio";
reg = <0x90000 0x200>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
index 3271e4c..2e8e412 100644
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -1,31 +1,8 @@
/ {
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
compatible = "marvell,98dx4122-pinctrl";
- reg = <0x10000 0x20>;
- pmx_nand: pmx-nand {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp18",
- "mpp19";
- marvell,function = "nand";
- };
- pmx_spi: pmx-spi {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
- marvell,function = "spi";
- };
- pmx_twsi0: pmx-twsi0 {
- marvell,pins = "mpp8", "mpp9";
- marvell,function = "twsi0";
- };
- pmx_uart0: pmx-uart0 {
- marvell,pins = "mpp10", "mpp11";
- marvell,function = "uart0";
- };
- pmx_uart1: pmx-uart1 {
- marvell,pins = "mpp13", "mpp14";
- marvell,function = "uart1";
- };
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts
index 6becede..c9247f8 100644
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/kirkwood-b3.dts
@@ -30,6 +30,7 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
mbus {
@@ -44,7 +45,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_button_power: pmx-button-power {
marvell,pins = "mpp39";
marvell,function = "gpio";
@@ -69,8 +70,6 @@
spi@10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
m25p16@0 {
#address-cells = <1>;
@@ -113,8 +112,6 @@
* UART0_TX = Testpoint 66
* See the Excito Wiki for more details.
*/
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
index 3b62aee..ab6ab49 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -14,10 +14,11 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
marvell,pins = "mpp15";
marvell,function = "sata0";
@@ -25,9 +26,6 @@
};
serial@12000 {
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
- clock-frequency = <166666667>;
status = "okay";
};
@@ -39,8 +37,6 @@
};
spi@10600 {
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
status = "okay";
flash@0 {
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
index 02d1225..812df69 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -22,10 +22,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl@10000 {
+ pin-controller@10000 {
pmx_sdio_gpios: pmx-sdio-gpios {
marvell,pins = "mpp37", "mpp38";
marvell,function = "gpio";
@@ -33,10 +34,7 @@
};
serial@12000 {
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
- clock-frequency = <200000000>;
- status = "ok";
+ status = "okay";
};
sata@80000 {
@@ -59,8 +57,6 @@
};
&nand {
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
chip-delay = <25>;
status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index bf7fe8a..d85ef0a9 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -13,6 +13,7 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
gpio-leds {
@@ -51,8 +52,6 @@
};
serial@12100 {
- pinctrl-0 = <&pmx_uart1>;
- pinctrl-names = "default";
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index cb9978c..5e586ed 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -13,6 +13,7 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
gpio-leds {
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index d5aa956..113dcf0 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -50,7 +50,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
&pmx_present_sata1 &pmx_fan_tacho
@@ -183,8 +183,6 @@
};
&nand {
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
status = "okay";
chip-delay = <35>;
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index f31312e..8497363 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -14,10 +14,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 28b3ee36..6467c79 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -14,10 +14,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_led_bluetooth: pmx-led-bluetooth {
marvell,pins = "mpp47";
marvell,function = "gpio";
@@ -37,8 +38,6 @@
spi@10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
m25p40@0 {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts
index 772092c..d4bcc1c 100644
--- a/arch/arm/boot/dts/kirkwood-ds109.dts
+++ b/arch/arm/boot/dts/kirkwood-ds109.dts
@@ -25,6 +25,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-150-32-35 {
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
index aabafbe..95bf83b 100644
--- a/arch/arm/boot/dts/kirkwood-ds110jv10.dts
+++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
@@ -25,6 +25,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-150-32-35 {
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
index 16ec7fb..61f47fb 100644
--- a/arch/arm/boot/dts/kirkwood-ds111.dts
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-100-15-35-1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
index cff1b23..bf4143c 100644
--- a/arch/arm/boot/dts/kirkwood-ds112.dts
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-100-15-35-1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts
index 3304119..6d25093 100644
--- a/arch/arm/boot/dts/kirkwood-ds209.dts
+++ b/arch/arm/boot/dts/kirkwood-ds209.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-150-32-35 {
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts
index 6052eaa..2f1933e 100644
--- a/arch/arm/boot/dts/kirkwood-ds210.dts
+++ b/arch/arm/boot/dts/kirkwood-ds210.dts
@@ -26,6 +26,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-150-32-35 {
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
index 7f76cd3..99afd46 100644
--- a/arch/arm/boot/dts/kirkwood-ds212.dts
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -27,6 +27,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-100-15-35-1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts
index 1f83a00..f5c4213 100644
--- a/arch/arm/boot/dts/kirkwood-ds212j.dts
+++ b/arch/arm/boot/dts/kirkwood-ds212j.dts
@@ -25,6 +25,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-100-32-35 {
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts
index 0a573ad..e80a962e 100644
--- a/arch/arm/boot/dts/kirkwood-ds409.dts
+++ b/arch/arm/boot/dts/kirkwood-ds409.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-150-15-18 {
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
index 1848a62..cae5af4 100644
--- a/arch/arm/boot/dts/kirkwood-ds409slim.dts
+++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-150-32-35 {
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
index a1737b4..623cd4a 100644
--- a/arch/arm/boot/dts/kirkwood-ds411.dts
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-100-15-35-1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts
index 0cde914..3348e33 100644
--- a/arch/arm/boot/dts/kirkwood-ds411j.dts
+++ b/arch/arm/boot/dts/kirkwood-ds411j.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-150-15-18 {
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
index aef0cad..a0a1fad 100644
--- a/arch/arm/boot/dts/kirkwood-ds411slim.dts
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-100-15-35-1 {
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index eb93294..aa60a0b 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -14,10 +14,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index 2d51fce..c5a1fc7 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -14,10 +14,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_led_health_r: pmx-led-health-r {
marvell,pins = "mpp46";
marvell,function = "gpio";
@@ -36,7 +37,6 @@
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
@@ -101,13 +101,19 @@
status = "okay";
ethphy0: ethernet-phy@0 {
- compatible = "marvell,88e1121";
+ /* Marvell 88E1121R */
+ compatible = "ethernet-phy-id0141.0cb0",
+ "ethernet-phy-ieee802.3-c22";
reg = <0>;
+ phy-connection-type = "rgmii-id";
};
ethphy1: ethernet-phy@1 {
- compatible = "marvell,88e1121";
+ /* Marvell 88E1121R */
+ compatible = "ethernet-phy-id0141.0cb0",
+ "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ phy-connection-type = "rgmii-id";
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index a1add3f..bfa5edd 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -14,10 +14,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_led_os_red: pmx-led-os-red {
marvell,pins = "mpp22";
marvell,function = "gpio";
@@ -104,8 +105,6 @@
&nand {
status = "okay";
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
partition@0 {
label = "u-boot";
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 8d8c80e..38e31d1 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -14,6 +14,7 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
linux,initrd-start = <0x4500040>;
linux,initrd-end = <0x4800000>;
};
@@ -29,7 +30,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp12";
marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 59e7a5a..05291f3 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -14,10 +14,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
&pmx_led_sata_brt_ctrl_2
&pmx_led_backup_brt_ctrl_1
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 04a1e44..61139bf 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -14,10 +14,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
pinctrl-names = "default";
@@ -45,9 +46,7 @@
};
&nand {
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
- status = "ok";
+ status = "okay";
chip-delay = <25>;
};
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts
index 6761ffa..2442566 100644
--- a/arch/arm/boot/dts/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/kirkwood-laplug.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
mbus {
@@ -37,14 +38,10 @@
ocp@f1000000 {
serial@12000 {
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
status = "okay";
};
i2c@11000 {
- pinctrl-0 = <&pmx_twsi0>;
- pinctrl-names = "default";
status = "okay";
eeprom@50 {
@@ -54,7 +51,7 @@
};
};
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp14";
marvell,function = "gpio";
@@ -139,7 +136,6 @@
&nand {
/* Total size : 512MB */
status = "okay";
- pinctrl-0 = <&pmx_nand>;
partition@0 {
label = "u-boot";
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 1656653..5348447 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -4,10 +4,11 @@
/ {
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_power_hdd: pmx-power-hdd {
marvell,pins = "mpp10";
marvell,function = "gpo";
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 73722c0..f3a9918 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -12,9 +12,10 @@
reg = <0x00000000 0x20000000>;
};
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- };
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
mbus {
pcie-controller {
@@ -27,7 +28,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_led_health: pmx-led-health {
marvell,pins = "mpp7";
marvell,function = "gpo";
@@ -89,11 +90,9 @@
};
- serial@12000 {
- status = "ok";
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
- };
+ serial@12000 {
+ status = "okay";
+ };
rtc@10300 {
status = "disabled";
@@ -163,8 +162,6 @@
};
&nand {
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
status = "okay";
partition@0 {
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 32c6fb4..49f9295 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -28,10 +28,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl@10000 {
+ pin-controller@10000 {
pmx_usb_led: pmx-usb-led {
marvell,pins = "mpp12";
marvell,function = "gpo";
@@ -49,8 +50,6 @@
};
spi@10600 {
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
status = "okay";
flash@0 {
@@ -64,10 +63,7 @@
};
serial@12000 {
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
- clock-frequency = <200000000>;
- status = "ok";
+ status = "okay";
};
ehci@50000 {
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index 4838478..fd733c6 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -25,6 +25,7 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
mbus {
@@ -38,7 +39,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_button_power: pmx-button-power {
marvell,pins = "mpp47";
marvell,function = "gpio";
@@ -112,8 +113,6 @@
};
serial@12000 {
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
index 7c8a0d9..b514d64 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -25,6 +25,7 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
mbus {
@@ -40,7 +41,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_button_power: pmx-button-power {
marvell,pins = "mpp47";
marvell,function = "gpio";
@@ -119,8 +120,6 @@
};
serial@12000 {
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index e6e5ec4..fe6c024 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -4,10 +4,11 @@
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_ns2_sata0: pmx-ns2-sata0 {
marvell,pins = "mpp21";
marvell,function = "sata0";
@@ -19,14 +20,10 @@
};
serial@12000 {
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
status = "okay";
};
spi@10600 {
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
status = "okay";
flash@0 {
@@ -45,8 +42,6 @@
};
i2c@11000 {
- pinctrl-0 = <&pmx_twsi0>;
- pinctrl-names = "default";
status = "okay";
eeprom@50 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
deleted file mode 100644
index aa78c2d..0000000
--- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
+++ /dev/null
@@ -1,107 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "ZyXEL NSA310";
-
- ocp@f1000000 {
- pinctrl: pinctrl@10000 {
-
- pmx_usb_power_off: pmx-usb-power-off {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
- pmx_pwr_off: pmx-pwr-off {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
-
- };
-
- serial@12000 {
- status = "ok";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
- };
-
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_pwr_off>;
- pinctrl-names = "default";
- gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power_off>;
- pinctrl-names = "default";
-
- usb0_power_off: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power Off";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&nand {
- status = "okay";
- chip-delay = <35>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x0100000>;
- read-only;
- };
- partition@100000 {
- label = "uboot_env";
- reg = <0x0100000 0x0080000>;
- };
- partition@180000 {
- label = "key_store";
- reg = <0x0180000 0x0080000>;
- };
- partition@200000 {
- label = "info";
- reg = <0x0200000 0x0080000>;
- };
- partition@280000 {
- label = "etc";
- reg = <0x0280000 0x0a00000>;
- };
- partition@c80000 {
- label = "kernel_1";
- reg = <0x0c80000 0x0a00000>;
- };
- partition@1680000 {
- label = "rootfs1";
- reg = <0x1680000 0x2fc0000>;
- };
- partition@4640000 {
- label = "kernel_2";
- reg = <0x4640000 0x0a00000>;
- };
- partition@5040000 {
- label = "rootfs2";
- reg = <0x5040000 0x2fc0000>;
- };
-};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 0a07af9..6139df0 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-#include "kirkwood-nsa310-common.dtsi"
+#include "kirkwood-nsa3x0-common.dtsi"
/ {
compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
@@ -12,6 +12,7 @@
chosen {
bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
};
mbus {
@@ -25,7 +26,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_unknown>;
pinctrl-names = "default";
@@ -59,26 +60,6 @@
marvell,function = "gpio";
};
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp37";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
pmx_led_hdd_green: pmx-led-hdd-green {
marvell,pins = "mpp41";
marvell,function = "gpio";
@@ -94,10 +75,6 @@
marvell,function = "gpio";
};
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
};
i2c@11000 {
@@ -110,30 +87,6 @@
};
};
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
- pinctrl-names = "default";
-
- button@1 {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- button@2 {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- button@3 {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
index 27ca6a7..3d2b3d4 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-#include "kirkwood-nsa310-common.dtsi"
+#include "kirkwood-nsa3x0-common.dtsi"
/*
* There are at least two different NSA310 designs. This variant does
@@ -17,10 +17,11 @@
chosen {
bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-names = "default";
pmx_led_esata_green: pmx-led-esata-green {
@@ -38,11 +39,6 @@
marvell,function = "gpio";
};
- pmx_usb_power_off: pmx-usb-power-off {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
@@ -53,26 +49,6 @@
marvell,function = "gpio";
};
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp37";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
pmx_led_hdd_green: pmx-led-hdd-green {
marvell,pins = "mpp41";
marvell,function = "gpio";
@@ -83,11 +59,6 @@
marvell,function = "gpio";
};
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
-
};
i2c@11000 {
@@ -100,28 +71,6 @@
};
};
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- button@1 {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- button@2 {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- button@3 {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
new file mode 100644
index 0000000..24f686d1
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -0,0 +1,215 @@
+/* Device tree file for the Zyxel NSA 320 NAS box.
+ *
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+ model = "Zyxel NSA320";
+ compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-names = "default";
+
+ /* SATA Activity and Present pins are not connected */
+ pmx_sata0: pmx-sata0 {
+ marvell,pins ;
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins ;
+ marvell,function = "sata1";
+ };
+
+ pmx_led_hdd2_green: pmx-led-hdd2-green {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd2_red: pmx-led-hdd2-red {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_data: pmx-mcu-data {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_green: pmx-led-usb-green {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_clk: pmx-mcu-clk {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_act: pmx-mcu-act {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_green: pmx-led-sys-green {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_orange: pmx-led-sys-orange {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_green: pmx-led-hdd1-green {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_red: pmx-led-hdd1-red {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ pmx_htp: pmx-htp {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ /* Buzzer needs to be switched at around 1kHz so is
+ not compatible with the gpio-beeper driver. */
+ pmx_buzzer: pmx-buzzer {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_vid_b1: pmx-vid-b1 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_resume_data: pmx-power-resume-data {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_resume_clk: pmx-power-resume-clk {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+
+ pcf8563: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+ };
+
+ regulators {
+ usb0_power: regulator@1 {
+ enable-active-high;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+ &pmx_led_usb_green
+ &pmx_led_sys_green &pmx_led_sys_orange
+ &pmx_led_copy_green &pmx_led_copy_red
+ &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+ pinctrl-names = "default";
+
+ green-sys {
+ label = "nsa320:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
+ orange-sys {
+ label = "nsa320:orange:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd1 {
+ label = "nsa320:green:hdd1";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd1 {
+ label = "nsa320:red:hdd1";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd2 {
+ label = "nsa320:green:hdd2";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd2 {
+ label = "nsa320:red:hdd2";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ green-usb {
+ label = "nsa320:green:usb";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+ green-copy {
+ label = "nsa320:green:copy";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+ red-copy {
+ label = "nsa320:red:copy";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ /* The following pins are currently not assigned to a driver,
+ some of them should be configured as inputs.
+ pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+ &pmx_htp &pmx_vid_b1
+ &pmx_power_resume_data &pmx_power_resume_clk>; */
+};
+
+&mdio {
+ status = "okay";
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
new file mode 100644
index 0000000..9cb083b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
@@ -0,0 +1,157 @@
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "ZyXEL NSA310";
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+
+ pmx_usb_power: pmx-usb-power {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_pwr_off: pmx-pwr-off {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_reset: pmx-btn-reset {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_copy: pmx-btn-copy {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_power: pmx-btn-power {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_green: pmx-led-copy-green {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_red: pmx-led-copy-red {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ status = "ok";
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_pwr_off>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ button@2 {
+ label = "Copy Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ button@3 {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power>;
+ pinctrl-names = "default";
+
+ usb0_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+ chip-delay = <35>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0000000 0x0100000>;
+ read-only;
+ };
+ partition@100000 {
+ label = "uboot_env";
+ reg = <0x0100000 0x0080000>;
+ };
+ partition@180000 {
+ label = "key_store";
+ reg = <0x0180000 0x0080000>;
+ };
+ partition@200000 {
+ label = "info";
+ reg = <0x0200000 0x0080000>;
+ };
+ partition@280000 {
+ label = "etc";
+ reg = <0x0280000 0x0a00000>;
+ };
+ partition@c80000 {
+ label = "kernel_1";
+ reg = <0x0c80000 0x0a00000>;
+ };
+ partition@1680000 {
+ label = "rootfs1";
+ reg = <0x1680000 0x2fc0000>;
+ };
+ partition@4640000 {
+ label = "kernel_2";
+ reg = <0x4640000 0x0a00000>;
+ };
+ partition@5040000 {
+ label = "rootfs2";
+ reg = <0x5040000 0x2fc0000>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 0650bea..fb9dc22 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -14,19 +14,16 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
serial@12000 {
- status = "ok";
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
+ status = "okay";
};
serial@12100 {
- status = "ok";
- pinctrl-0 = <&pmx_uart1>;
- pinctrl-names = "default";
+ status = "okay";
};
sata@80000 {
@@ -36,8 +33,6 @@
i2c@11100 {
status = "okay";
- pinctrl-0 = <&pmx_twsi1>;
- pinctrl-names = "default";
s35390a: s35390a@30 {
compatible = "sii,s35390a";
@@ -45,7 +40,7 @@
};
};
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
pinctrl-names = "default";
@@ -133,8 +128,6 @@
&nand {
chip-delay = <25>;
status = "okay";
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
partition@0 {
label = "uboot";
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
index 38520a2..d5e3bc5 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -26,19 +26,16 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
serial@12000 {
- status = "ok";
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
+ status = "okay";
};
serial@12100 {
- status = "ok";
- pinctrl-0 = <&pmx_uart1>;
- pinctrl-names = "default";
+ status = "okay";
};
sata@80000 {
@@ -48,8 +45,6 @@
i2c@11100 {
status = "okay";
- pinctrl-0 = <&pmx_twsi1>;
- pinctrl-names = "default";
s24c02: s24c02@50 {
compatible = "atmel,24c02";
@@ -57,7 +52,7 @@
};
};
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
pinctrl-names = "default";
@@ -109,13 +104,6 @@
marvell,pins = "mpp41", "mpp42", "mpp43";
marvell,function = "gpio";
};
-
- pmx_ge1: pmx-ge1 {
- marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
- "mpp24", "mpp25", "mpp26", "mpp27",
- "mpp30", "mpp31", "mpp32", "mpp33";
- marvell,function = "ge1";
- };
};
};
@@ -158,8 +146,6 @@
&nand {
chip-delay = <25>;
status = "okay";
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
partition@0 {
label = "uboot";
@@ -213,8 +199,6 @@
ð1 {
status = "okay";
- pinctrl-0 = <&pmx_ge1>;
- pinctrl-names = "default";
ethernet1-port@0 {
phy-handle = <ðphy1>;
};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
index e9dd850..35a29de 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
@@ -26,6 +26,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
mbus {
@@ -39,7 +40,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_usb_power>;
pinctrl-names = "default";
@@ -56,8 +57,6 @@
spi@10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
m25p128@0 {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index d6368c3..26cf0e0 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -22,6 +22,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
mbus {
@@ -35,7 +36,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_sdio_cd>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
index 93ec3d0..3b19f1f 100644
--- a/arch/arm/boot/dts/kirkwood-rs212.dts
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-100-15-35-3 {
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts
index 311df4e..921ca49 100644
--- a/arch/arm/boot/dts/kirkwood-rs409.dts
+++ b/arch/arm/boot/dts/kirkwood-rs409.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-150-15-18 {
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts
index f90da85..02852b0 100644
--- a/arch/arm/boot/dts/kirkwood-rs411.dts
+++ b/arch/arm/boot/dts/kirkwood-rs411.dts
@@ -24,6 +24,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
gpio-fan-100-15-35-3 {
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
index 1ff848d..7196c7f 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -17,10 +17,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
@@ -44,8 +45,6 @@
};
};
serial@12000 {
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
status = "okay";
};
};
@@ -72,8 +71,6 @@
};
&nand {
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
status = "okay";
partition@0 {
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 4227c97..811e097 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -25,7 +25,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pmx_alarmled_12: pmx-alarmled-12 {
marvell,pins = "mpp12";
marvell,function = "gpio";
@@ -213,8 +213,6 @@
spi@10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
m25p80@0 {
#address-cells = <1>;
@@ -259,8 +257,6 @@
i2c@11000 {
status = "okay";
clock-frequency = <400000>;
- pinctrl-0 = <&pmx_twsi0>;
- pinctrl-names = "default";
rs5c372: rs5c372@32 {
status = "disabled";
@@ -277,14 +273,10 @@
serial@12000 {
status = "okay";
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
};
serial@12100 {
status = "okay";
- pinctrl-0 = <&pmx_uart1>;
- pinctrl-names = "default";
};
poweroff@12100 {
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index 7d1c767..610ec0f 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -27,6 +27,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
mbus {
@@ -40,7 +41,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
pinctrl-names = "default";
@@ -64,10 +65,6 @@
marvell,function = "gpio";
};
- /*
- * Redefined from kirkwood-6281.dtsi, because
- * we don't use SPI CS on MPP0, but on MPP7.
- */
pmx_spi: pmx-spi {
marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
marvell,function = "spi";
@@ -86,8 +83,6 @@
};
spi@10600 {
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
status = "okay";
flash@0 {
@@ -131,6 +126,9 @@
alc5621: alc5621@1a {
compatible = "realtek,alc5621";
reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ add-ctrl = <0x3700>;
+ jack-det-ctrl = <0x4810>;
};
};
@@ -189,6 +187,31 @@
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
};
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Speaker", "SPKOUT",
+ "Speaker", "SPKOUTN",
+ "MIC1", "Mic Jack",
+ "MIC2", "Mic Jack";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker",
+ "Microphone", "Mic Jack";
+
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&audio>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&alc5621>;
+ };
+ };
};
&mdio {
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index 5fc817c..f5c8c0d 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -14,10 +14,11 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
/*
* Switch positions
*
@@ -85,9 +86,7 @@
};
serial@12000 {
- status = "ok";
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
+ status = "okay";
};
sata@80000 {
@@ -96,9 +95,7 @@
};
i2c@11000 {
- status = "ok";
- pinctrl-0 = <&pmx_twsi0>;
- pinctrl-names = "default";
+ status = "okay";
};
mvsdio@90000 {
@@ -175,8 +172,6 @@
&nand {
status = "okay";
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
partition@0 {
label = "u-boot";
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index c17ae45..9767d73 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -6,7 +6,7 @@
/ {
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index 0713d072..bfc1a32 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -16,7 +16,7 @@
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 911f3a8..df7f152 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -9,6 +9,7 @@
chosen {
bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
};
mbus {
@@ -25,8 +26,6 @@
i2c@11000 {
status = "okay";
clock-frequency = <400000>;
- pinctrl-0 = <&pmx_twsi0>;
- pinctrl-names = "default";
s35390a: s35390a@30 {
compatible = "s35390a";
@@ -34,16 +33,10 @@
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
- pinctrl-0 = <&pmx_uart0>;
- pinctrl-names = "default";
};
serial@12100 {
- clock-frequency = <200000000>;
status = "okay";
- pinctrl-0 = <&pmx_uart1>;
- pinctrl-names = "default";
};
poweroff@12100 {
compatible = "qnap,power-off";
@@ -52,8 +45,6 @@
};
spi@10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
m25p128@0 {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi
index 1a9c624..30ab93b 100644
--- a/arch/arm/boot/dts/kirkwood-ts419.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi
@@ -14,7 +14,7 @@
compatible = "qnap,ts419", "marvell,kirkwood";
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-names = "default";
pmx_USB_copy_button: pmx-USB-copy-button {
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 9038458..afc640c 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -40,7 +40,7 @@
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
- crypto@0301 {
+ cesa: crypto@0301 {
compatible = "marvell,orion-crypto";
reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
<MBUS_ID(0x03, 0x01) 0 0x800>;
@@ -61,6 +61,8 @@
chip-delay = <25>;
/* set partition map and/or chip-delay in board dts */
clocks = <&gate_clk 7>;
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
status = "disabled";
};
};
@@ -71,13 +73,59 @@
#address-cells = <1>;
#size-cells = <1>;
+ pinctrl: pin-controller@10000 {
+ /* set compatible property in SoC file */
+ reg = <0x10000 0x20>;
+
+ pmx_ge1: pmx-ge1 {
+ marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
+ "mpp24", "mpp25", "mpp26", "mpp27",
+ "mpp30", "mpp31", "mpp32", "mpp33";
+ marvell,function = "ge1";
+ };
+
+ pmx_nand: pmx-nand {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp18", "mpp19";
+ marvell,function = "nand";
+ };
+
+ /*
+ * Default SPI0 pinctrl setting with CSn on mpp0,
+ * overwrite marvell,pins on board level if required.
+ */
+ pmx_spi: pmx-spi {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+ marvell,function = "spi";
+ };
+
+ pmx_twsi0: pmx-twsi0 {
+ marvell,pins = "mpp8", "mpp9";
+ marvell,function = "twsi0";
+ };
+
+ /*
+ * Default UART pinctrl setting without RTS/CTS,
+ * overwrite marvell,pins on board level if required.
+ */
+ pmx_uart0: pmx-uart0 {
+ marvell,pins = "mpp10", "mpp11";
+ marvell,function = "uart0";
+ };
+
+ pmx_uart1: pmx-uart1 {
+ marvell,pins = "mpp13", "mpp14";
+ marvell,function = "uart1";
+ };
+ };
+
core_clk: core-clocks@10030 {
compatible = "marvell,kirkwood-core-clock";
reg = <0x10030 0x4>;
#clock-cells = <1>;
};
- spi@10600 {
+ spi0: spi@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -85,6 +133,8 @@
interrupts = <23>;
reg = <0x10600 0x28>;
clocks = <&gate_clk 7>;
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
status = "disabled";
};
@@ -120,24 +170,30 @@
interrupts = <29>;
clock-frequency = <100000>;
clocks = <&gate_clk 7>;
+ pinctrl-0 = <&pmx_twsi0>;
+ pinctrl-names = "default";
status = "disabled";
};
- serial@12000 {
+ uart0: serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <33>;
clocks = <&gate_clk 7>;
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
status = "disabled";
};
- serial@12100 {
+ uart1: serial@12100 {
compatible = "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <34>;
clocks = <&gate_clk 7>;
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
status = "disabled";
};
@@ -146,7 +202,7 @@
reg = <0x20000 0x80>, <0x1500 0x20>;
};
- system-controller@20000 {
+ sysc: system-controller@20000 {
compatible = "marvell,orion-system-controller";
reg = <0x20000 0x120>;
};
@@ -196,7 +252,7 @@
status = "okay";
};
- ehci@50000 {
+ usb0: ehci@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
interrupts = <19>;
@@ -204,7 +260,7 @@
status = "okay";
};
- xor@60800 {
+ dma0: xor@60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
@@ -224,7 +280,7 @@
};
};
- xor@60900 {
+ dma1: xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60B00 0x100>;
@@ -282,6 +338,8 @@
reg = <0x76000 0x4000>;
clocks = <&gate_clk 19>;
marvell,tx-checksum-limit = <1600>;
+ pinctrl-0 = <&pmx_ge1>;
+ pinctrl-names = "default";
status = "disabled";
ethernet1-port@0 {
@@ -314,6 +372,7 @@
audio0: audio-controller@a0000 {
compatible = "marvell,kirkwood-audio";
+ #sound-dai-cells = <0>;
reg = <0xa0000 0x2210>;
interrupts = <24>;
clocks = <&gate_clk 9>;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 62d0211..82c5ac8 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -55,7 +55,6 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupt-parent = <&gic>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
<0 1 IRQ_TYPE_LEVEL_HIGH>,
<0 2 IRQ_TYPE_LEVEL_HIGH>,
@@ -95,7 +94,6 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0200 0 0x200>;
- interrupt-parent = <&gic>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
<0 33 IRQ_TYPE_LEVEL_HIGH>,
<0 34 IRQ_TYPE_LEVEL_HIGH>,
@@ -136,7 +134,6 @@
dma0: dma-controller@e6700020 {
compatible = "renesas,shdma-r8a73a4";
reg = <0 0xe6700020 0 0x89e0>;
- interrupt-parent = <&gic>;
interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
0 200 IRQ_TYPE_LEVEL_HIGH
0 201 IRQ_TYPE_LEVEL_HIGH
@@ -171,7 +168,6 @@
compatible = "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
- interrupt-parent = <&gic>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -180,7 +176,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x428>;
- interrupt-parent = <&gic>;
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -190,7 +185,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x428>;
- interrupt-parent = <&gic>;
interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -200,7 +194,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x428>;
- interrupt-parent = <&gic>;
interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -210,7 +203,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6530000 0 0x428>;
- interrupt-parent = <&gic>;
interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -220,7 +212,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6540000 0 0x428>;
- interrupt-parent = <&gic>;
interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -230,7 +221,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x428>;
- interrupt-parent = <&gic>;
interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -240,7 +230,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6550000 0 0x428>;
- interrupt-parent = <&gic>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -250,7 +239,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6560000 0 0x428>;
- interrupt-parent = <&gic>;
interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -260,7 +248,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6570000 0 0x428>;
- interrupt-parent = <&gic>;
interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -268,7 +255,6 @@
mmcif0: mmc@ee200000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
- interrupt-parent = <&gic>;
interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <4>;
status = "disabled";
@@ -277,7 +263,6 @@
mmcif1: mmc@ee220000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
- interrupt-parent = <&gic>;
interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <4>;
status = "disabled";
@@ -309,7 +294,6 @@
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
status = "disabled";
@@ -318,7 +302,6 @@
sdhi1: sd@ee120000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee120000 0 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
status = "disabled";
@@ -327,7 +310,6 @@
sdhi2: sd@ee140000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee140000 0 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
status = "disabled";
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 95a849b..486007d 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "r8a7740.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
@@ -77,26 +78,26 @@
power-key {
gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
- linux,code = <116>;
+ linux,code = <KEY_POWER>;
label = "SW3";
gpio-key,wakeup;
};
back-key {
gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
- linux,code = <158>;
+ linux,code = <KEY_BACK>;
label = "SW4";
};
menu-key {
gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
- linux,code = <139>;
+ linux,code = <KEY_MENU>;
label = "SW5";
};
home-key {
gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
- linux,code = <102>;
+ linux,code = <KEY_HOME>;
label = "SW6";
};
};
@@ -117,6 +118,16 @@
};
};
+ i2c2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
+ &pfc 91 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
backlight {
compatible = "pwm-backlight";
pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
@@ -147,6 +158,18 @@
};
};
+ðer {
+ pinctrl-0 = <ðer_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy0>;
+ status = "ok";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
&i2c0 {
status = "okay";
touchscreen@55 {
@@ -166,10 +189,23 @@
};
};
+&i2c2 {
+ status = "okay";
+ rtc@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+};
+
&pfc {
pinctrl-0 = <&scifa1_pins>;
pinctrl-names = "default";
+ ether_pins: ether {
+ renesas,groups = "gether_mii", "gether_int";
+ renesas,function = "gether";
+ };
+
scifa1_pins: serial1 {
renesas,groups = "scifa1_data";
renesas,function = "scifa1";
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 2551e94..636251b 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -14,6 +14,7 @@
/ {
compatible = "renesas,r8a7740";
+ interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
@@ -48,7 +49,6 @@
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
- interrupt-parent = <&gic>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
@@ -69,7 +69,6 @@
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
- interrupt-parent = <&gic>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
@@ -90,7 +89,6 @@
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
- interrupt-parent = <&gic>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
@@ -111,7 +109,6 @@
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
- interrupt-parent = <&gic>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
@@ -122,12 +119,23 @@
0 149 IRQ_TYPE_LEVEL_HIGH>;
};
+ ether: ethernet@e9a00000 {
+ compatible = "renesas,gether-r8a7740";
+ reg = <0xe9a00000 0x800>,
+ <0xe9a01800 0x800>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ /* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */
+ phy-mode = "mii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c0: i2c@fff20000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
reg = <0xfff20000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
0 202 IRQ_TYPE_LEVEL_HIGH
0 203 IRQ_TYPE_LEVEL_HIGH
@@ -138,9 +146,8 @@
i2c1: i2c@e6c20000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
reg = <0xe6c20000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
0 71 IRQ_TYPE_LEVEL_HIGH
0 72 IRQ_TYPE_LEVEL_HIGH
@@ -173,9 +180,8 @@
};
mmcif0: mmc@e6bd0000 {
- compatible = "renesas,sh-mmcif";
+ compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
0 57 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -184,7 +190,6 @@
sdhi0: sd@e6850000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6850000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
0 118 IRQ_TYPE_LEVEL_HIGH
0 119 IRQ_TYPE_LEVEL_HIGH>;
@@ -196,7 +201,6 @@
sdhi1: sd@e6860000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6860000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
0 122 IRQ_TYPE_LEVEL_HIGH
0 123 IRQ_TYPE_LEVEL_HIGH>;
@@ -208,7 +212,6 @@
sdhi2: sd@e6870000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6870000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
0 126 IRQ_TYPE_LEVEL_HIGH
0 127 IRQ_TYPE_LEVEL_HIGH>;
@@ -219,9 +222,8 @@
sh_fsi2: sound@fe1f0000 {
#sound-dai-cells = <1>;
- compatible = "renesas,sh_fsi2";
+ compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
reg = <0xfe1f0000 0x400>;
- interrupt-parent = <&gic>;
interrupts = <0 9 0x4>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
index 06cda19..f76f6ec 100644
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
@@ -109,4 +109,18 @@
pinctrl-0 = <&hspi0_pins>;
pinctrl-names = "default";
status = "okay";
+
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl008k";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "data(spi)";
+ reg = <0x00000000 0x00100000>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 85c5b3b..3af0a21 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -20,6 +20,7 @@
/ {
compatible = "renesas,r8a7778";
+ interrupt-parent = <&gic>;
cpus {
cpu@0 {
@@ -52,7 +53,6 @@
<0xfe780024 4>,
<0xfe780044 4>,
<0xfe780064 4>;
- interrupt-parent = <&gic>;
interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
0 28 IRQ_TYPE_LEVEL_HIGH
0 29 IRQ_TYPE_LEVEL_HIGH
@@ -63,7 +63,6 @@
gpio0: gpio@ffc40000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc40000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -75,7 +74,6 @@
gpio1: gpio@ffc41000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc41000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -87,7 +85,6 @@
gpio2: gpio@ffc42000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc42000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -99,7 +96,6 @@
gpio3: gpio@ffc43000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc43000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -111,7 +107,6 @@
gpio4: gpio@ffc44000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc44000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -130,7 +125,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc70000 0x1000>;
- interrupt-parent = <&gic>;
interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -140,7 +134,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc71000 0x1000>;
- interrupt-parent = <&gic>;
interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -150,7 +143,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc72000 0x1000>;
- interrupt-parent = <&gic>;
interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -160,7 +152,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc73000 0x1000>;
- interrupt-parent = <&gic>;
interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -168,7 +159,6 @@
mmcif: mmc@ffe4e000 {
compatible = "renesas,sh-mmcif";
reg = <0xffe4e000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -176,7 +166,6 @@
sdhi0: sd@ffe4c000 {
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4c000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
cap-sdio-irq;
@@ -186,7 +175,6 @@
sdhi1: sd@ffe4d000 {
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4d000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
cap-sdio-irq;
@@ -196,7 +184,6 @@
sdhi2: sd@ffe4f000 {
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4f000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
cap-sdio-irq;
@@ -204,26 +191,29 @@
};
hspi0: spi@fffc7000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc7000 0x18>;
- interrupt-controller = <&gic>;
interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi1: spi@fffc8000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc8000 0x18>;
- interrupt-controller = <&gic>;
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi2: spi@fffc6000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc6000 0x18>;
- interrupt-controller = <&gic>;
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index 76f5eef..b27c637 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -45,6 +45,7 @@
phy-mode = "mii";
interrupt-parent = <&irqpin0>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ smsc,irq-push-pull;
reg-io-width = <4>;
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index d0561d4..b517c8e 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -15,6 +15,7 @@
/ {
compatible = "renesas,r8a7779";
+ interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
@@ -59,7 +60,6 @@
gpio0: gpio@ffc40000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc40000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -71,7 +71,6 @@
gpio1: gpio@ffc41000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc41000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -83,7 +82,6 @@
gpio2: gpio@ffc42000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc42000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -95,7 +93,6 @@
gpio3: gpio@ffc43000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc43000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -107,7 +104,6 @@
gpio4: gpio@ffc44000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc44000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -119,7 +115,6 @@
gpio5: gpio@ffc45000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc45000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -131,7 +126,6 @@
gpio6: gpio@ffc46000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc46000 0x2c>;
- interrupt-parent = <&gic>;
interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -150,7 +144,6 @@
<0xfe780024 4>,
<0xfe780044 4>,
<0xfe780064 4>;
- interrupt-parent = <&gic>;
interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
0 28 IRQ_TYPE_LEVEL_HIGH
0 29 IRQ_TYPE_LEVEL_HIGH
@@ -163,7 +156,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7779";
reg = <0xffc70000 0x1000>;
- interrupt-parent = <&gic>;
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -173,7 +165,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7779";
reg = <0xffc71000 0x1000>;
- interrupt-parent = <&gic>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -183,7 +174,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7779";
reg = <0xffc72000 0x1000>;
- interrupt-parent = <&gic>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -193,7 +183,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7779";
reg = <0xffc73000 0x1000>;
- interrupt-parent = <&gic>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -211,14 +200,12 @@
sata: sata@fc600000 {
compatible = "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
- interrupt-parent = <&gic>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
};
sdhi0: sd@ffe4c000 {
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4c000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
cap-sdio-irq;
@@ -228,7 +215,6 @@
sdhi1: sd@ffe4d000 {
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4d000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
cap-sdio-irq;
@@ -238,7 +224,6 @@
sdhi2: sd@ffe4e000 {
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4e000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
cap-sdio-irq;
@@ -248,7 +233,6 @@
sdhi3: sd@ffe4f000 {
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4f000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
cap-sdio-irq;
@@ -256,26 +240,29 @@
};
hspi0: spi@fffc7000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc7000 0x18>;
- interrupt-controller = <&gic>;
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi1: spi@fffc8000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc8000 0x18>;
- interrupt-controller = <&gic>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi2: spi@fffc6000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc6000 0x18>;
- interrupt-controller = <&gic>;
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index d01048a..86d676f 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "r8a7790.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Lager";
@@ -36,6 +37,39 @@
#size-cells = <1>;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button@1 {
+ linux,code = <KEY_1>;
+ label = "SW2-1";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+ button@2 {
+ linux,code = <KEY_2>;
+ label = "SW2-2";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ };
+ button@3 {
+ linux,code = <KEY_3>;
+ label = "SW2-3";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+ };
+ button@4 {
+ linux,code = <KEY_4>;
+ label = "SW2-4";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
led6 {
@@ -155,10 +189,16 @@
renesas,function = "mmc1";
};
- qspi_pins: spi {
+ qspi_pins: spi0 {
renesas,groups = "qspi_ctrl", "qspi_data4";
renesas,function = "qspi";
};
+
+ msiof1_pins: spi2 {
+ renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
+ "msiof1_tx";
+ renesas,function = "msiof1";
+ };
};
ðer {
@@ -173,6 +213,7 @@
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
};
};
@@ -190,7 +231,7 @@
status = "okay";
};
-&spi {
+&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
@@ -202,6 +243,8 @@
compatible = "spansion,s25fl512s";
reg = <0>;
spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
m25p,fast-read;
partition@0 {
@@ -221,6 +264,22 @@
};
};
+&msiof1 {
+ pinctrl-0 = <&msiof1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ pmic: pmic@0 {
+ compatible = "renesas,r2a11302ft";
+ reg = <0>;
+ spi-max-frequency = <6000000>;
+ spi-cpol;
+ spi-cpha;
+ };
+
+};
+
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 618e5b5..e6130d6 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -24,6 +24,15 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
+ i2c4 = &iic0;
+ i2c5 = &iic1;
+ i2c6 = &iic2;
+ i2c7 = &iic3;
+ spi0 = &qspi;
+ spi1 = &msiof0;
+ spi2 = &msiof1;
+ spi3 = &msiof2;
+ spi4 = &msiof3;
};
cpus {
@@ -108,6 +117,7 @@
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
};
gpio1: gpio@e6051000 {
@@ -119,6 +129,7 @@
gpio-ranges = <&pfc 0 32 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
};
gpio2: gpio@e6052000 {
@@ -130,6 +141,7 @@
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
};
gpio3: gpio@e6053000 {
@@ -141,6 +153,7 @@
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
};
gpio4: gpio@e6054000 {
@@ -152,6 +165,7 @@
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
};
gpio5: gpio@e6055000 {
@@ -163,6 +177,7 @@
gpio-ranges = <&pfc 0 160 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
};
thermal@e61f0000 {
@@ -231,6 +246,46 @@
status = "disabled";
};
+ iic0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+ status = "disabled";
+ };
+
+ iic1: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
+ status = "disabled";
+ };
+
+ iic2: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+ reg = <0 0xe6520000 0 0x425>;
+ interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
+ status = "disabled";
+ };
+
+ iic3: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
+ status = "disabled";
+ };
+
mmcif0: mmcif@ee200000 {
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
@@ -697,18 +752,19 @@
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
- <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
- <&mmc0_clk>, <&rclk_clk>;
+ clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
+ <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
+ <&hp_clk>, <&hp_clk>, <&rclk_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
- R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
- R8A7790_CLK_MMCIF0 R8A7790_CLK_CMT1
+ R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+ R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
+ R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_CMT1
>;
clock-output-names =
- "tpu0", "mmcif1", "sdhi3", "sdhi2",
- "sdhi1", "sdhi0", "mmcif0", "cmt1";
+ "iic2", "tpu0", "mmcif1", "sdhi3",
+ "sdhi2", "sdhi1", "sdhi0", "mmcif0",
+ "iic0", "iic1", "cmt1";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -752,20 +808,25 @@
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>,
- <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+ clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
+ <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD
- R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1
- R8A7790_CLK_I2C0
+ R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3
+ R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0
+ R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS
+ R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0
>;
clock-output-names =
- "rcan1", "rcan0", "qspi_mod", "i2c3", "i2c2", "i2c1", "i2c0";
+ "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
+ "rcan1", "rcan0", "qspi_mod", "iic3",
+ "i2c3", "i2c2", "i2c1", "i2c0";
};
};
- spi: spi@e6b10000 {
+ qspi: spi@e6b10000 {
compatible = "renesas,qspi-r8a7790", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
@@ -775,4 +836,44 @@
#size-cells = <0>;
status = "disabled";
};
+
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-r8a7790";
+ reg = <0 0xe6e20000 0 0x0064>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6e10000 {
+ compatible = "renesas,msiof-r8a7790";
+ reg = <0 0xe6e10000 0 0x0064>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6e00000 {
+ compatible = "renesas,msiof-r8a7790";
+ reg = <0 0xe6e00000 0 0x0064>;
+ interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c90000 {
+ compatible = "renesas,msiof-r8a7790";
+ reg = <0 0xe6c90000 0 0x0064>;
+ interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
new file mode 100644
index 0000000..cc6d992
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -0,0 +1,219 @@
+/*
+ * Device Tree Source for the Henninger board
+ *
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Henninger";
+ compatible = "renesas,henninger", "renesas,r8a7791";
+
+ aliases {
+ serial0 = &scif0;
+ };
+
+ chosen {
+ bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ memory@200000000 {
+ device_type = "memory";
+ reg = <2 0x00000000 0 0x40000000>;
+ };
+
+ vcc_sdhi0: regulator@0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccq_sdhi0: regulator@1 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi2: regulator@2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccq_sdhi2: regulator@3 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI2 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&pfc {
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data_d";
+ renesas,function = "scif0";
+ };
+
+ ether_pins: ether {
+ renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+ renesas,function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ renesas,groups = "intc_irq0";
+ renesas,function = "intc";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sd2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+
+ qspi_pins: spi0 {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+
+ msiof0_pins: spi1 {
+ renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+ "msiof0_tx";
+ renesas,function = "msiof0";
+ };
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+ðer {
+ pinctrl-0 = <ðer_pins &phy1_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "ok";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi2>;
+ vqmmc-supply = <&vccq_sdhi2>;
+ cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl512s";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "loader_prg";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user_prg";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash_fs";
+ reg = <0x00440000 0x03bc0000>;
+ };
+ };
+};
+
+&msiof0 {
+ pinctrl-0 = <&msiof0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ pmic@0 {
+ compatible = "renesas,r2a11302ft";
+ reg = <0>;
+ spi-max-frequency = <6000000>;
+ spi-cpol;
+ spi-cpha;
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index de1b697..0d69813 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -13,6 +13,7 @@
/dts-v1/;
#include "r8a7791.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Koelsch";
@@ -40,51 +41,79 @@
gpio-keys {
compatible = "gpio-keys";
+ key-1 {
+ gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW2-1";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-2 {
+ gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW2-2";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-3 {
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW2-3";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-4 {
+ gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_4>;
+ label = "SW2-4";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
key-a {
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
- linux,code = <30>;
+ linux,code = <KEY_A>;
label = "SW30";
gpio-key,wakeup;
debounce-interval = <20>;
};
key-b {
gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
- linux,code = <48>;
+ linux,code = <KEY_B>;
label = "SW31";
gpio-key,wakeup;
debounce-interval = <20>;
};
key-c {
gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
- linux,code = <46>;
+ linux,code = <KEY_C>;
label = "SW32";
gpio-key,wakeup;
debounce-interval = <20>;
};
key-d {
gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
- linux,code = <32>;
+ linux,code = <KEY_D>;
label = "SW33";
gpio-key,wakeup;
debounce-interval = <20>;
};
key-e {
gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
- linux,code = <18>;
+ linux,code = <KEY_E>;
label = "SW34";
gpio-key,wakeup;
debounce-interval = <20>;
};
key-f {
gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
- linux,code = <33>;
+ linux,code = <KEY_F>;
label = "SW35";
gpio-key,wakeup;
debounce-interval = <20>;
};
key-g {
gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
- linux,code = <34>;
+ linux,code = <KEY_G>;
label = "SW36";
gpio-key,wakeup;
debounce-interval = <20>;
@@ -195,11 +224,16 @@
};
};
+&i2c6 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
&pfc {
pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>;
pinctrl-names = "default";
- i2c2_pins: i2c {
+ i2c2_pins: i2c2 {
renesas,groups = "i2c2";
renesas,function = "i2c2";
};
@@ -244,10 +278,16 @@
renesas,function = "sdhi2";
};
- qspi_pins: spi {
+ qspi_pins: spi0 {
renesas,groups = "qspi_ctrl", "qspi_data4";
renesas,function = "qspi";
};
+
+ msiof0_pins: spi1 {
+ renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+ "msiof0_tx";
+ renesas,function = "msiof0";
+ };
};
ðer {
@@ -262,6 +302,7 @@
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
};
};
@@ -301,7 +342,7 @@
status = "okay";
};
-&spi {
+&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
@@ -313,6 +354,8 @@
compatible = "spansion,s25fl512s";
reg = <0>;
spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
m25p,fast-read;
partition@0 {
@@ -331,3 +374,18 @@
};
};
};
+
+&msiof0 {
+ pinctrl-0 = <&msiof0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ pmic: pmic@0 {
+ compatible = "renesas,r2a11302ft";
+ reg = <0>;
+ spi-max-frequency = <6000000>;
+ spi-cpol;
+ spi-cpha;
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 4618170..5eea08f 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -27,6 +27,13 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ spi0 = &qspi;
+ spi1 = &msiof0;
+ spi2 = &msiof1;
+ spi3 = &msiof2;
};
cpus {
@@ -37,14 +44,14 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
- clock-frequency = <1300000000>;
+ clock-frequency = <1500000000>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
- clock-frequency = <1300000000>;
+ clock-frequency = <1500000000>;
};
};
@@ -69,6 +76,7 @@
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
};
gpio1: gpio@e6051000 {
@@ -80,6 +88,7 @@
gpio-ranges = <&pfc 0 32 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
};
gpio2: gpio@e6052000 {
@@ -91,6 +100,7 @@
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
};
gpio3: gpio@e6053000 {
@@ -102,6 +112,7 @@
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
};
gpio4: gpio@e6054000 {
@@ -113,6 +124,7 @@
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
};
gpio5: gpio@e6055000 {
@@ -124,6 +136,7 @@
gpio-ranges = <&pfc 0 160 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
};
gpio6: gpio@e6055400 {
@@ -135,6 +148,7 @@
gpio-ranges = <&pfc 0 192 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
};
gpio7: gpio@e6055800 {
@@ -146,6 +160,7 @@
gpio-ranges = <&pfc 0 224 26>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
};
thermal@e61f0000 {
@@ -180,6 +195,7 @@
<0 17 IRQ_TYPE_LEVEL_HIGH>;
};
+ /* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -231,6 +247,7 @@
};
i2c5: i2c@e6528000 {
+ /* doesn't need pinmux */
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,i2c-r8a7791";
@@ -240,6 +257,37 @@
status = "disabled";
};
+ i2c6: i2c@e60b0000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
+ status = "disabled";
+ };
+
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7791";
reg = <0 0xe6060000 0 0x250>;
@@ -249,7 +297,6 @@
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee100000 0 0x200>;
- interrupt-parent = <&gic>;
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
status = "disabled";
@@ -258,7 +305,6 @@
sdhi1: sd@ee140000 {
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee140000 0 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
status = "disabled";
@@ -267,7 +313,6 @@
sdhi2: sd@ee160000 {
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee160000 0 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
status = "disabled";
@@ -712,15 +757,16 @@
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>,
- <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>;
+ clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
+ <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1
- R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1
+ R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
+ R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1
>;
clock-output-names =
- "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1";
+ "tpu0", "sdhi2", "sdhi1", "sdhi0",
+ "mmcif0", "i2c7", "i2c8", "cmt1";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -733,19 +779,19 @@
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+ clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
<&zx_clk>, <&zx_clk>, <&zx_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
+ R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0
R8A7791_CLK_LVDS0
>;
clock-output-names =
- "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
+ "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
"scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0";
};
mstp8_clks: mstp8_clks@e6150990 {
@@ -764,18 +810,23 @@
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>,
- <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
- <&p_clk>;
+ clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
+ <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD
- R8A7791_CLK_I2C5 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3
- R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
+ R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4
+ R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0
+ R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
+ R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2
+ R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
>;
clock-output-names =
- "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3",
- "i2c2", "i2c1", "i2c0";
+ "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
+ "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2",
+ "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -789,7 +840,7 @@
};
};
- spi: spi@e6b10000 {
+ qspi: spi@e6b10000 {
compatible = "renesas,qspi-r8a7791", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
@@ -799,4 +850,34 @@
#size-cells = <0>;
status = "disabled";
};
+
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-r8a7791";
+ reg = <0 0xe6e20000 0 0x0064>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6e10000 {
+ compatible = "renesas,msiof-r8a7791";
+ reg = <0 0xe6e10000 0 0x0064>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6e00000 {
+ compatible = "renesas,msiof-r8a7791";
+ reg = <0 0xe6e00000 0 0x0064>;
+ interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 035df40..afb3273 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -18,6 +18,7 @@
/ {
model = "bq Curie 2";
+ compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
memory {
reg = <0x60000000 0x40000000>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 4d4dfbb..048c5de 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -79,7 +79,7 @@
pinctrl@20008000 {
compatible = "rockchip,rk3066a-pinctrl";
- reg = <0x20008000 0x150>;
+ rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 3ba1968..a5eee55 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -17,6 +17,7 @@
/ {
model = "Radxa Rock";
+ compatible = "radxa,rock", "rockchip,rk3188";
memory {
reg = <0x60000000 0x80000000>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ed9a70a..a494fb0 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -75,17 +75,16 @@
pinctrl@20008000 {
compatible = "rockchip,rk3188-pinctrl";
- reg = <0x20008000 0xa0>,
- <0x20008164 0x1a0>;
- reg-names = "base", "pull";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmu>;
+
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@0x2000a000 {
compatible = "rockchip,rk3188-gpio-bank0";
- reg = <0x2000a000 0x100>,
- <0x20004064 0x8>;
+ reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 9>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 26e5a96..2adf1cc9e 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -31,11 +31,16 @@
reg = <0x1013c000 0x100>;
};
- pmu@20004000 {
- compatible = "rockchip,rk3066-pmu";
+ pmu: pmu@20004000 {
+ compatible = "rockchip,rk3066-pmu", "syscon";
reg = <0x20004000 0x100>;
};
+ grf: grf@20008000 {
+ compatible = "syscon";
+ reg = <0x20008000 0x200>;
+ };
+
gic: interrupt-controller@1013d000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 3f260b9..e0b15a6 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -125,6 +125,9 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0008000 0x4000>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
+ <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
clocks = <&ssc0_clk>;
@@ -243,6 +246,9 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf800c000 0x4000>;
interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
clocks = <&ssc1_clk>;
@@ -589,6 +595,84 @@
};
};
+ pwm0 {
+ pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
+ atmel,pins =
+ <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */
+ };
+ pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX0 */
+ };
+ pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
+ atmel,pins =
+ <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */
+ };
+ pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
+ atmel,pins =
+ <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX1 */
+ };
+
+ pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
+ atmel,pins =
+ <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */
+ };
+ pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
+ atmel,pins =
+ <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX0 */
+ };
+ pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
+ atmel,pins =
+ <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */
+ };
+ pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
+ atmel,pins =
+ <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */
+ };
+ pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
+ atmel,pins =
+ <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX1 */
+ };
+ pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
+ atmel,pins =
+ <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */
+ };
+
+ pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
+ atmel,pins =
+ <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXCK */
+ };
+ pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
+ atmel,pins =
+ <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA4 and TIOA0 */
+ };
+ pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
+ atmel,pins =
+ <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXEN */
+ };
+ pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA5 and TIOB0 */
+ };
+
+ pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
+ atmel,pins =
+ <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */
+ };
+ pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
+ atmel,pins =
+ <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA6 and TCLK0 */
+ };
+ pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
+ atmel,pins =
+ <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */
+ };
+ pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
+ atmel,pins =
+ <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA7 */
+ };
+ };
+
spi0 {
pinctrl_spi0: spi0-0 {
atmel,pins =
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index dba739b..306eef0 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -32,6 +32,10 @@
};
};
+ ssc0: ssc@f0008000 {
+ atmel,clk-from-rk-pin;
+ };
+
/*
* i2c0 conflicts with ISI:
* disable it to allow the use of ISI
@@ -156,7 +160,7 @@
};
sound {
- compatible = "atmel,sama5d3ek-wm8904";
+ compatible = "atmel,asoc-wm8904";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
@@ -166,9 +170,12 @@
"Headphone Jack", "HPOUTR",
"IN2L", "Line In Jack",
"IN2R", "Line In Jack",
+ "MICBIAS", "IN1L",
"IN1L", "Mic";
atmel,ssc-controller = <&ssc0>;
atmel,audio-codec = <&wm8904>;
+
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index eb8886b..a99171c 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "sh73a0.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -112,43 +113,43 @@
back-key {
gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
- linux,code = <158>;
+ linux,code = <KEY_BACK>;
label = "SW3";
};
right-key {
gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
- linux,code = <106>;
+ linux,code = <KEY_RIGHT>;
label = "SW2-R";
};
left-key {
gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
- linux,code = <105>;
+ linux,code = <KEY_LEFT>;
label = "SW2-L";
};
enter-key {
gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
- linux,code = <28>;
+ linux,code = <KEY_ENTER>;
label = "SW2-P";
};
up-key {
gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
- linux,code = <103>;
+ linux,code = <KEY_UP>;
label = "SW2-U";
};
down-key {
gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
- linux,code = <108>;
+ linux,code = <KEY_DOWN>;
label = "SW2-D";
};
home-key {
gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
- linux,code = <102>;
+ linux,code = <KEY_HOME>;
label = "SW1";
};
};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 56fc214..280966b 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -15,7 +15,8 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/reset/altr,rst-mgr.h>
/ {
#address-cells = <1>;
@@ -75,7 +76,14 @@
pdma: pdma@ffe01000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xffe01000 0x1000>;
- interrupts = <0 180 4>;
+ interrupts = <0 104 4>,
+ <0 105 4>,
+ <0 106 4>,
+ <0 107 4>,
+ <0 108 4>,
+ <0 109 4>,
+ <0 110 4>,
+ <0 111 4>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
@@ -84,6 +92,22 @@
};
};
+ can0: can@ffc00000 {
+ compatible = "bosch,d_can";
+ reg = <0xffc00000 0x1000>;
+ interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+ clocks = <&can0_clk>;
+ status = "disabled";
+ };
+
+ can1: can@ffc01000 {
+ compatible = "bosch,d_can";
+ reg = <0xffc01000 0x1000>;
+ interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
+ clocks = <&can1_clk>;
+ status = "disabled";
+ };
+
clkmgr@ffd04000 {
compatible = "altr,clk-mgr";
reg = <0xffd04000 0x1000>;
@@ -124,7 +148,7 @@
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
- fixed-divider = <2>;
+ div-reg = <0xe0 0 9>;
reg = <0x48>;
};
@@ -132,7 +156,7 @@
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
- fixed-divider = <4>;
+ div-reg = <0xe4 0 9>;
reg = <0x4C>;
};
@@ -140,7 +164,7 @@
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
clocks = <&main_pll>;
- fixed-divider = <4>;
+ div-reg = <0xe8 0 9>;
reg = <0x50>;
};
@@ -460,6 +484,8 @@
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
clocks = <&emac0_clk>;
clock-names = "stmmaceth";
+ resets = <&rst EMAC0_RESET>;
+ reset-names = "stmmaceth";
status = "disabled";
};
@@ -472,6 +498,48 @@
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
clocks = <&emac1_clk>;
clock-names = "stmmaceth";
+ resets = <&rst EMAC1_RESET>;
+ reset-names = "stmmaceth";
+ status = "disabled";
+ };
+
+ i2c0: i2c@ffc04000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc04000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 158 0x4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc05000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc05000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 159 0x4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc06000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc06000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 160 0x4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc07000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc07000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 161 0x4>;
status = "disabled";
};
@@ -508,24 +576,32 @@
compatible = "snps,dw-apb-timer";
interrupts = <0 167 4>;
reg = <0xffc08000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
};
timer1: timer1@ffc09000 {
compatible = "snps,dw-apb-timer";
interrupts = <0 168 4>;
reg = <0xffc09000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
};
timer2: timer2@ffd00000 {
compatible = "snps,dw-apb-timer";
interrupts = <0 169 4>;
reg = <0xffd00000 0x1000>;
+ clocks = <&osc1>;
+ clock-names = "timer";
};
timer3: timer3@ffd01000 {
compatible = "snps,dw-apb-timer";
interrupts = <0 170 4>;
reg = <0xffd01000 0x1000>;
+ clocks = <&osc1>;
+ clock-names = "timer";
};
uart0: serial0@ffc02000 {
@@ -534,6 +610,7 @@
interrupts = <0 162 4>;
reg-shift = <2>;
reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
};
uart1: serial1@ffc03000 {
@@ -542,13 +619,42 @@
interrupts = <0 163 4>;
reg-shift = <2>;
reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
};
- rstmgr@ffd05000 {
+ rst: rstmgr@ffd05000 {
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x1000>;
};
+ usbphy0: usbphy@0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb00000 0xffff>;
+ interrupts = <0 125 4>;
+ clocks = <&usb_mp_clk>;
+ clock-names = "otg";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ffb40000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb40000 0xffff>;
+ interrupts = <0 128 4>;
+ clocks = <&usb_mp_clk>;
+ clock-names = "otg";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
sysmgr: sysmgr@ffd08000 {
compatible = "altr,sys-mgr", "syscon";
reg = <0xffd08000 0x4000>;
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index 6c87b70..12d1c2c 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -15,7 +15,7 @@
*/
/dts-v1/;
-/include/ "socfpga.dtsi"
+#include "socfpga.dtsi"
/ {
soc {
@@ -38,32 +38,8 @@
};
};
- serial0@ffc02000 {
- clock-frequency = <100000000>;
- };
-
- serial1@ffc03000 {
- clock-frequency = <100000000>;
- };
-
sysmgr@ffd08000 {
cpu1-start-addr = <0xffd080c4>;
};
-
- timer0@ffc08000 {
- clock-frequency = <100000000>;
- };
-
- timer1@ffc09000 {
- clock-frequency = <100000000>;
- };
-
- timer2@ffd00000 {
- clock-frequency = <25000000>;
- };
-
- timer3@ffd01000 {
- clock-frequency = <25000000>;
- };
};
};
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index a87ee1c..d532d17 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -15,7 +15,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/include/ "socfpga_arria5.dtsi"
+#include "socfpga_arria5.dtsi"
/ {
model = "Altera SOCFPGA Arria V SoC Development Kit";
@@ -59,3 +59,22 @@
rxdv-skew-ps = <0>;
rxc-skew-ps = <2000>;
};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index ca41b0e..bf51182 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -16,7 +16,7 @@
*/
/dts-v1/;
-/include/ "socfpga.dtsi"
+#include "socfpga.dtsi"
/ {
soc {
@@ -45,30 +45,6 @@
status = "okay";
};
- timer0@ffc08000 {
- clock-frequency = <100000000>;
- };
-
- timer1@ffc09000 {
- clock-frequency = <100000000>;
- };
-
- timer2@ffd00000 {
- clock-frequency = <25000000>;
- };
-
- timer3@ffd01000 {
- clock-frequency = <25000000>;
- };
-
- serial0@ffc02000 {
- clock-frequency = <100000000>;
- };
-
- serial1@ffc03000 {
- clock-frequency = <100000000>;
- };
-
sysmgr@ffd08000 {
cpu1-start-addr = <0xffd080c4>;
};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index ae16d97..45de151 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -15,7 +15,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/include/ "socfpga_cyclone5.dtsi"
+#include "socfpga_cyclone5.dtsi"
/ {
model = "Altera SOCFPGA Cyclone V SoC Development Kit";
@@ -52,3 +52,22 @@
rxdv-skew-ps = <0>;
rxc-skew-ps = <2000>;
};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index b79e2a2..d26f155 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -15,7 +15,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/include/ "socfpga_cyclone5.dtsi"
+#include "socfpga_cyclone5.dtsi"
/ {
model = "Terasic SoCkit";
@@ -52,3 +52,7 @@
rxdv-skew-ps = <0>;
rxc-skew-ps = <2000>;
};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
new file mode 100644
index 0000000..a1814b4
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "EBV SOCrates";
+ compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+};
+
+&gmac1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rtc: rtc@68 {
+ compatible = "stm,m41t82";
+ reg = <0x68>;
+ };
+};
+
+&mmc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index 87d6f75..09792b4 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -16,7 +16,7 @@
*/
/dts-v1/;
-/include/ "socfpga.dtsi"
+#include "socfpga.dtsi"
/ {
model = "Altera SOCFPGA VT";
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
new file mode 100644
index 0000000..fe69f92
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih407.dtsi"
+/ {
+ model = "STiH407 B2120";
+ compatible = "st,stih407-b2120", "st,stih407";
+
+ chosen {
+ bootargs = "console=ttyAS0,115200";
+ linux,stdout-path = &sbc_serial0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x80000000>;
+ };
+
+ aliases {
+ ttyAS0 = &sbc_serial0;
+ };
+
+ soc {
+ sbc_serial0: serial@9530000 {
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ red {
+ #gpio-cells = <2>;
+ label = "Front Panel LED";
+ gpios = <&pio4 1 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ #gpio-cells = <2>;
+ gpios = <&pio1 3 0>;
+ default-state = "off";
+ };
+ };
+
+ i2c@9842000 {
+ status = "okay";
+ };
+
+ i2c@9843000 {
+ status = "okay";
+ };
+
+ i2c@9844000 {
+ status = "okay";
+ };
+
+ i2c@9845000 {
+ status = "okay";
+ };
+
+ i2c@9540000 {
+ status = "okay";
+ };
+
+ /* SSC11 to HDMI */
+ i2c@9541000 {
+ status = "okay";
+ /* HDMI V1.3a supports Standard mode only */
+ clock-frequency = <100000>;
+ st,i2c-min-scl-pulse-width-us = <0>;
+ st,i2c-min-sda-pulse-width-us = <5>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
new file mode 100644
index 0000000..800f46f
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+ clocks {
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: arm-periph-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <600000000>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ clk_ext2f_a9: clockgen-c0@13 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ clock-output-names = "clk-s-icn-reg-0";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
new file mode 100644
index 0000000..402844c
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -0,0 +1,615 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+ aliases {
+ /* 0-5: PIO_SBC */
+ gpio0 = &pio0;
+ gpio1 = &pio1;
+ gpio2 = &pio2;
+ gpio3 = &pio3;
+ gpio4 = &pio4;
+ gpio5 = &pio5;
+ /* 10-19: PIO_FRONT0 */
+ gpio6 = &pio10;
+ gpio7 = &pio11;
+ gpio8 = &pio12;
+ gpio9 = &pio13;
+ gpio10 = &pio14;
+ gpio11 = &pio15;
+ gpio12 = &pio16;
+ gpio13 = &pio17;
+ gpio14 = &pio18;
+ gpio15 = &pio19;
+ /* 20: PIO_FRONT1 */
+ gpio16 = &pio20;
+ /* 30-35: PIO_REAR */
+ gpio17 = &pio30;
+ gpio18 = &pio31;
+ gpio19 = &pio32;
+ gpio20 = &pio33;
+ gpio21 = &pio34;
+ gpio22 = &pio35;
+ /* 40-42: PIO_FLASH */
+ gpio23 = &pio40;
+ gpio24 = &pio41;
+ gpio25 = &pio42;
+ };
+
+ soc {
+ pin-controller-sbc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-sbc-pinctrl";
+ st,syscfg = <&syscfg_sbc>;
+ reg = <0x0961f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09610000 0x6000>;
+
+ pio0: gpio@09610000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO0";
+ };
+ pio1: gpio@09611000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO1";
+ };
+ pio2: gpio@09612000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO2";
+ };
+ pio3: gpio@09613000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO3";
+ };
+ pio4: gpio@09614000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO4";
+ };
+
+ pio5: gpio@09615000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO5";
+ };
+
+ rc {
+ pinctrl_ir: ir0 {
+ st,pins {
+ ir = <&pio4 0 ALT2 IN>;
+ };
+ };
+ };
+
+ /* SBC_ASC0 - UART10 */
+ sbc_serial0 {
+ pinctrl_sbc_serial0: sbc_serial0-0 {
+ st,pins {
+ tx = <&pio3 4 ALT1 OUT>;
+ rx = <&pio3 5 ALT1 IN>;
+ };
+ };
+ };
+ /* SBC_ASC1 - UART11 */
+ sbc_serial1 {
+ pinctrl_sbc_serial1: sbc_serial1-0 {
+ st,pins {
+ tx = <&pio2 6 ALT3 OUT>;
+ rx = <&pio2 7 ALT3 IN>;
+ };
+ };
+ };
+
+ i2c10 {
+ pinctrl_i2c10_default: i2c10-default {
+ st,pins {
+ sda = <&pio4 6 ALT1 BIDIR>;
+ scl = <&pio4 5 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ i2c11 {
+ pinctrl_i2c11_default: i2c11-default {
+ st,pins {
+ sda = <&pio5 1 ALT1 BIDIR>;
+ scl = <&pio5 0 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ keyscan {
+ pinctrl_keyscan: keyscan {
+ st,pins {
+ keyin0 = <&pio4 0 ALT6 IN>;
+ keyin1 = <&pio4 5 ALT4 IN>;
+ keyin2 = <&pio0 4 ALT2 IN>;
+ keyin3 = <&pio2 6 ALT2 IN>;
+
+ keyout0 = <&pio4 6 ALT4 OUT>;
+ keyout1 = <&pio1 7 ALT2 OUT>;
+ keyout2 = <&pio0 6 ALT2 OUT>;
+ keyout3 = <&pio2 7 ALT2 OUT>;
+ };
+ };
+ };
+
+ gmac1 {
+ /*
+ * Almost all the boards based on STiH407 SoC have an embedded
+ * switch where the mdio/mdc have been used for managing the SMI
+ * iface via I2C. For this reason these lines can be allocated
+ * by using dedicated configuration (in case of there will be a
+ * standard PHY transceiver on-board).
+ */
+ pinctrl_rgmii1: rgmii1-0 {
+ st,pins {
+
+ txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+ rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
+ clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
+ };
+ };
+
+ pinctrl_rgmii1_mdio: rgmii1-mdio {
+ st,pins {
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ };
+ };
+
+ pinctrl_mii1: mii1 {
+ st,pins {
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+ mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+ };
+ };
+ };
+
+ pwm1 {
+ pinctrl_pwm1_chan0_default: pwm1-0-default {
+ st,pins {
+ pwm-out = <&pio3 0 ALT1 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan1_default: pwm1-1-default {
+ st,pins {
+ pwm-out = <&pio4 4 ALT1 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan2_default: pwm1-2-default {
+ st,pins {
+ pwm-out = <&pio4 6 ALT3 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan3_default: pwm1-3-default {
+ st,pins {
+ pwm-out = <&pio4 7 ALT3 OUT>;
+ };
+ };
+ };
+ };
+
+ pin-controller-front0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-front-pinctrl";
+ st,syscfg = <&syscfg_front>;
+ reg = <0x0920f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09200000 0x10000>;
+
+ pio10: pio@09200000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO10";
+ };
+ pio11: pio@09201000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO11";
+ };
+ pio12: pio@09202000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO12";
+ };
+ pio13: pio@09203000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO13";
+ };
+ pio14: pio@09204000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO14";
+ };
+ pio15: pio@09205000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO15";
+ };
+ pio16: pio@09206000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x100>;
+ st,bank-name = "PIO16";
+ };
+ pio17: pio@09207000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x100>;
+ st,bank-name = "PIO17";
+ };
+ pio18: pio@09208000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x100>;
+ st,bank-name = "PIO18";
+ };
+ pio19: pio@09209000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x100>;
+ st,bank-name = "PIO19";
+ };
+
+ /* Comms */
+ serial0 {
+ pinctrl_serial0: serial0-0 {
+ st,pins {
+ tx = <&pio17 0 ALT1 OUT>;
+ rx = <&pio17 1 ALT1 IN>;
+ };
+ };
+ };
+
+ serial1 {
+ pinctrl_serial1: serial1-0 {
+ st,pins {
+ tx = <&pio16 0 ALT1 OUT>;
+ rx = <&pio16 1 ALT1 IN>;
+ };
+ };
+ };
+
+ serial2 {
+ pinctrl_serial2: serial2-0 {
+ st,pins {
+ tx = <&pio15 0 ALT1 OUT>;
+ rx = <&pio15 1 ALT1 IN>;
+ };
+ };
+ };
+
+ mmc1 {
+ pinctrl_sd1: sd1-0 {
+ st,pins {
+ sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+ sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
+ sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
+ sd_led = <&pio16 6 ALT6 OUT>;
+ sd_pwren = <&pio16 7 ALT6 OUT>;
+ sd_cd = <&pio19 0 ALT6 IN>;
+ sd_wp = <&pio19 1 ALT6 IN>;
+ };
+ };
+ };
+
+
+ i2c0 {
+ pinctrl_i2c0_default: i2c0-default {
+ st,pins {
+ sda = <&pio10 6 ALT2 BIDIR>;
+ scl = <&pio10 5 ALT2 BIDIR>;
+ };
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_default: i2c1-default {
+ st,pins {
+ sda = <&pio11 1 ALT2 BIDIR>;
+ scl = <&pio11 0 ALT2 BIDIR>;
+ };
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_default: i2c2-default {
+ st,pins {
+ sda = <&pio15 6 ALT2 BIDIR>;
+ scl = <&pio15 5 ALT2 BIDIR>;
+ };
+ };
+ };
+
+ i2c3 {
+ pinctrl_i2c3_default: i2c3-default {
+ st,pins {
+ sda = <&pio18 6 ALT1 BIDIR>;
+ scl = <&pio18 5 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ spi0 {
+ pinctrl_spi0_default: spi0-default {
+ st,pins {
+ mtsr = <&pio12 6 ALT2 BIDIR>;
+ mrst = <&pio12 7 ALT2 BIDIR>;
+ scl = <&pio12 5 ALT2 BIDIR>;
+ };
+ };
+ };
+ };
+
+ pin-controller-front1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-front-pinctrl";
+ st,syscfg = <&syscfg_front>;
+ reg = <0x0921f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09210000 0x10000>;
+
+ pio20: pio@09210000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO20";
+ };
+ };
+
+ pin-controller-rear {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-rear-pinctrl";
+ st,syscfg = <&syscfg_rear>;
+ reg = <0x0922f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09220000 0x6000>;
+
+ pio30: gpio@09220000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO30";
+ };
+ pio31: gpio@09221000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO31";
+ };
+ pio32: gpio@09222000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO32";
+ };
+ pio33: gpio@09223000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x100>;
+ st,bank-name = "PIO33";
+ };
+ pio34: gpio@09224000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x100>;
+ st,bank-name = "PIO34";
+ };
+ pio35: gpio@09225000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x100>;
+ st,bank-name = "PIO35";
+ };
+
+ i2c4 {
+ pinctrl_i2c4_default: i2c4-default {
+ st,pins {
+ sda = <&pio30 1 ALT1 BIDIR>;
+ scl = <&pio30 0 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ i2c5 {
+ pinctrl_i2c5_default: i2c5-default {
+ st,pins {
+ sda = <&pio34 4 ALT1 BIDIR>;
+ scl = <&pio34 3 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ usb3 {
+ pinctrl_usb3: usb3-2 {
+ st,pins {
+ usb-oc-detect = <&pio35 4 ALT1 IN>;
+ usb-pwr-enable = <&pio35 5 ALT1 OUT>;
+ usb-vbus-valid = <&pio35 6 ALT1 IN>;
+ };
+ };
+ };
+
+ pwm0 {
+ pinctrl_pwm0_chan0_default: pwm0-0-default {
+ st,pins {
+ pwm-out = <&pio31 1 ALT1 OUT>;
+ };
+ };
+ };
+ };
+
+ pin-controller-flash {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-flash-pinctrl";
+ st,syscfg = <&syscfg_flash>;
+ reg = <0x0923f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+ interrupts-names = "irqmux";
+ ranges = <0 0x09230000 0x3000>;
+
+ pio40: gpio@09230000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x100>;
+ st,bank-name = "PIO40";
+ };
+ pio41: gpio@09231000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x100>;
+ st,bank-name = "PIO41";
+ };
+ pio42: gpio@09232000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x100>;
+ st,bank-name = "PIO42";
+ };
+
+ mmc0 {
+ pinctrl_mmc0: mmc0-0 {
+ st,pins {
+ emmc_clk = <&pio40 6 ALT1 BIDIR>;
+ emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+ emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
+ emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
+ emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
+ emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
+ emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
+ emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
+ emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
+ emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
new file mode 100644
index 0000000..4f9024f
--- /dev/null
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-clock.dtsi"
+#include "stih407-pinctrl.dtsi"
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ intc: interrupt-controller@08761000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+ };
+
+ scu@08760000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x08760000 0x1000>;
+ };
+
+ timer@08760200 {
+ interrupt-parent = <&intc>;
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x08760200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&arm_periph_clk>;
+ };
+
+ l2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0x08762000 0x1000>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+ compatible = "simple-bus";
+
+ syscfg_sbc: sbc-syscfg@9620000 {
+ compatible = "st,stih407-sbc-syscfg", "syscon";
+ reg = <0x9620000 0x1000>;
+ };
+
+ syscfg_front: front-syscfg@9280000 {
+ compatible = "st,stih407-front-syscfg", "syscon";
+ reg = <0x9280000 0x1000>;
+ };
+
+ syscfg_rear: rear-syscfg@9290000 {
+ compatible = "st,stih407-rear-syscfg", "syscon";
+ reg = <0x9290000 0x1000>;
+ };
+
+ syscfg_flash: flash-syscfg@92a0000 {
+ compatible = "st,stih407-flash-syscfg", "syscon";
+ reg = <0x92a0000 0x1000>;
+ };
+
+ syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
+ compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+ reg = <0x9600000 0x1000>;
+ };
+
+ syscfg_core: core-syscfg@92b0000 {
+ compatible = "st,stih407-core-syscfg", "syscon";
+ reg = <0x92b0000 0x1000>;
+ };
+
+ syscfg_lpm: lpm-syscfg@94b5100 {
+ compatible = "st,stih407-lpm-syscfg", "syscon";
+ reg = <0x94b5100 0x1000>;
+ };
+
+ serial@9830000 {
+ compatible = "st,asc";
+ reg = <0x9830000 0x2c>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial0>;
+ clocks = <&clk_ext2f_a9>;
+
+ status = "disabled";
+ };
+
+ serial@9831000 {
+ compatible = "st,asc";
+ reg = <0x9831000 0x2c>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial1>;
+ clocks = <&clk_ext2f_a9>;
+
+ status = "disabled";
+ };
+
+ serial@9832000 {
+ compatible = "st,asc";
+ reg = <0x9832000 0x2c>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial2>;
+ clocks = <&clk_ext2f_a9>;
+
+ status = "disabled";
+ };
+
+ /* SBC_ASC0 - UART10 */
+ sbc_serial0: serial@9530000 {
+ compatible = "st,asc";
+ reg = <0x9530000 0x2c>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial0>;
+ clocks = <&clk_sysin>;
+
+ status = "disabled";
+ };
+
+ serial@9531000 {
+ compatible = "st,asc";
+ reg = <0x9531000 0x2c>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial1>;
+ clocks = <&clk_sysin>;
+
+ status = "disabled";
+ };
+
+ i2c@9840000 {
+ compatible = "st,comms-ssc4-i2c";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x9840000 0x110>;
+ clocks = <&clk_ext2f_a9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9841000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9841000 0x110>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_ext2f_a9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9842000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9842000 0x110>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_ext2f_a9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9843000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9843000 0x110>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_ext2f_a9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9844000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9844000 0x110>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_ext2f_a9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9845000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9845000 0x110>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_ext2f_a9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+
+ status = "disabled";
+ };
+
+
+ /* SSCs on SBC */
+ i2c@9540000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9540000 0x110>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9541000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9541000 0x110>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih415-b2000.dts b/arch/arm/boot/dts/stih415-b2000.dts
index d4af531..bdfbd37 100644
--- a/arch/arm/boot/dts/stih415-b2000.dts
+++ b/arch/arm/boot/dts/stih415-b2000.dts
@@ -11,5 +11,5 @@
#include "stih41x-b2000.dtsi"
/ {
model = "STiH415 B2000 Board";
- compatible = "st,stih415", "st,stih415-b2000";
+ compatible = "st,stih415-b2000", "st,stih415";
};
diff --git a/arch/arm/boot/dts/stih415-b2020.dts b/arch/arm/boot/dts/stih415-b2020.dts
index 442b019..71903a8 100644
--- a/arch/arm/boot/dts/stih415-b2020.dts
+++ b/arch/arm/boot/dts/stih415-b2020.dts
@@ -11,5 +11,5 @@
#include "stih41x-b2020.dtsi"
/ {
model = "STiH415 B2020 Board";
- compatible = "st,stih415", "st,stih415-b2020";
+ compatible = "st,stih415-b2020", "st,stih415";
};
diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi
index d047dbc..3ee3451 100644
--- a/arch/arm/boot/dts/stih415-clock.dtsi
+++ b/arch/arm/boot/dts/stih415-clock.dtsi
@@ -5,48 +5,529 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#include <dt-bindings/clock/stih415-clks.h>
+
/ {
clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
/*
* Fixed 30MHz oscillator input to SoC
*/
- CLK_SYSIN: CLK_SYSIN {
+ clk_sysin: clk-sysin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <30000000>;
};
/*
- * ARM Peripheral clock for timers
+ * ClockGenAs on SASG1
*/
- arm_periph_clk: arm_periph_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <500000000>;
+ clockgen-a@fee62000 {
+ reg = <0xfee62000 0xb48>;
+
+ clk_s_a0_pll: clk-s-a0-pll {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-plls-c65";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-pll0-hs",
+ "clk-s-a0-pll0-ls",
+ "clk-s-a0-pll1";
+ };
+
+ clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
+ #clock-cells = <0>;
+ compatible = "st,clkgena-prediv-c65",
+ "st,clkgena-prediv";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-osc-prediv";
+ };
+
+ clk_s_a0_hs: clk-s-a0-hs {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c65-hs",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_s_a0_osc_prediv>,
+ <&clk_s_a0_pll 0>, /* PLL0 HS */
+ <&clk_s_a0_pll 2>; /* PLL1 */
+
+ clock-output-names = "clk-s-fdma-0",
+ "clk-s-fdma-1",
+ ""; /* clk-s-jit-sense */
+ /* Fourth output unused */
+ };
+
+ clk_s_a0_ls: clk-s-a0-ls {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c65-ls",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_s_a0_osc_prediv>,
+ <&clk_s_a0_pll 1>, /* PLL0 LS */
+ <&clk_s_a0_pll 2>; /* PLL1 */
+
+ clock-output-names = "clk-s-icn-reg-0",
+ "clk-s-icn-if-0",
+ "clk-s-icn-reg-lp-0",
+ "clk-s-emiss",
+ "clk-s-eth1-phy",
+ "clk-s-mii-ref-out";
+ /* Remaining outputs unused */
+ };
+ };
+
+ clockgen-a@fee81000 {
+ reg = <0xfee81000 0xb48>;
+
+ clk_s_a1_pll: clk-s-a1-pll {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-plls-c65";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a1-pll0-hs",
+ "clk-s-a1-pll0-ls",
+ "clk-s-a1-pll1";
+ };
+
+ clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
+ #clock-cells = <0>;
+ compatible = "st,clkgena-prediv-c65",
+ "st,clkgena-prediv";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a1-osc-prediv";
+ };
+
+ clk_s_a1_hs: clk-s-a1-hs {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c65-hs",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_s_a1_osc_prediv>,
+ <&clk_s_a1_pll 0>, /* PLL0 HS */
+ <&clk_s_a1_pll 2>; /* PLL1 */
+
+ clock-output-names = "", /* Reserved */
+ "", /* Reserved */
+ "clk-s-stac-phy",
+ "clk-s-vtac-tx-phy";
+ };
+
+ clk_s_a1_ls: clk-s-a1-ls {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c65-ls",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_s_a1_osc_prediv>,
+ <&clk_s_a1_pll 1>, /* PLL0 LS */
+ <&clk_s_a1_pll 2>; /* PLL1 */
+
+ clock-output-names = "clk-s-icn-if-2",
+ "clk-s-card-mmc",
+ "clk-s-icn-if-1",
+ "clk-s-gmac0-phy",
+ "clk-s-nand-ctrl",
+ "", /* Reserved */
+ "clk-s-mii0-ref-out",
+ ""; /* clk-s-stac-sys */
+ /* Remaining outputs unused */
+ };
};
/*
- * Bootloader initialized system infrastructure clock for
- * serial devices.
+ * ClockGenAs on MPE41
*/
- CLKS_ICN_REG_0: CLKS_ICN_REG_0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
+ clockgen-a@fde12000 {
+ reg = <0xfde12000 0xb50>;
+
+ clk_m_a0_pll0: clk-m-a0-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a0-pll0-phi0",
+ "clk-m-a0-pll0-phi1",
+ "clk-m-a0-pll0-phi2",
+ "clk-m-a0-pll0-phi3";
+ };
+
+ clk_m_a0_pll1: clk-m-a0-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a0-pll1-phi0",
+ "clk-m-a0-pll1-phi1",
+ "clk-m-a0-pll1-phi2",
+ "clk-m-a0-pll1-phi3";
+ };
+
+ clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
+ #clock-cells = <0>;
+ compatible = "st,clkgena-prediv-c32",
+ "st,clkgena-prediv";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a0-osc-prediv";
+ };
+
+ clk_m_a0_div0: clk-m-a0-div0 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf0",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a0_osc_prediv>,
+ <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
+ <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
+
+ clock-output-names = "clk-m-apb-pm", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "clk-m-pp-dmu-0",
+ "clk-m-pp-dmu-1",
+ "clk-m-icm-disp",
+ ""; /* Unused */
+ };
+
+ clk_m_a0_div1: clk-m-a0-div1 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf1",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a0_osc_prediv>,
+ <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
+ <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
+
+ clock-output-names = "", /* Unused */
+ "", /* Unused */
+ "clk-m-a9-ext2f",
+ "clk-m-st40rt",
+ "clk-m-st231-dmu-0",
+ "clk-m-st231-dmu-1",
+ "clk-m-st231-aud",
+ "clk-m-st231-gp-0";
+ };
+
+ clk_m_a0_div2: clk-m-a0-div2 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf2",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a0_osc_prediv>,
+ <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
+ <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
+
+ clock-output-names = "clk-m-st231-gp-1",
+ "clk-m-icn-cpu",
+ "clk-m-icn-stac",
+ "clk-m-icn-dmu-0",
+ "clk-m-icn-dmu-1",
+ "", /* Unused */
+ "", /* Unused */
+ ""; /* Unused */
+ };
+
+ clk_m_a0_div3: clk-m-a0-div3 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf3",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a0_osc_prediv>,
+ <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
+ <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
+
+ clock-output-names = "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "clk-m-icn-eram",
+ "clk-m-a9-trace";
+ };
};
- CLKS_GMAC0_PHY: clockgenA1@7 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- clock-output-names = "CLKS_GMAC0_PHY";
+ clockgen-a@fd6db000 {
+ reg = <0xfd6db000 0xb50>;
+
+ clk_m_a1_pll0: clk-m-a1-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a1-pll0-phi0",
+ "clk-m-a1-pll0-phi1",
+ "clk-m-a1-pll0-phi2",
+ "clk-m-a1-pll0-phi3";
+ };
+
+ clk_m_a1_pll1: clk-m-a1-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a1-pll1-phi0",
+ "clk-m-a1-pll1-phi1",
+ "clk-m-a1-pll1-phi2",
+ "clk-m-a1-pll1-phi3";
+ };
+
+ clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
+ #clock-cells = <0>;
+ compatible = "st,clkgena-prediv-c32",
+ "st,clkgena-prediv";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a1-osc-prediv";
+ };
+
+ clk_m_a1_div0: clk-m-a1-div0 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf0",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a1_osc_prediv>,
+ <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
+ <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
+
+ clock-output-names = "clk-m-fdma-12",
+ "clk-m-fdma-10",
+ "clk-m-fdma-11",
+ "clk-m-hva-lmi",
+ "clk-m-proc-sc",
+ "clk-m-tp",
+ "clk-m-icn-gpu",
+ "clk-m-icn-vdp-0";
+ };
+
+ clk_m_a1_div1: clk-m-a1-div1 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf1",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a1_osc_prediv>,
+ <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+ <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+ clock-output-names = "clk-m-icn-vdp-1",
+ "clk-m-icn-vdp-2",
+ "clk-m-icn-vdp-3",
+ "clk-m-prv-t1-bus",
+ "clk-m-icn-vdp-4",
+ "clk-m-icn-reg-10",
+ "", /* Unused */
+ ""; /* clk-m-icn-st231 */
+ };
+
+ clk_m_a1_div2: clk-m-a1-div2 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf2",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a1_osc_prediv>,
+ <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
+ <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
+
+ clock-output-names = "clk-m-fvdp-proc-alt",
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ ""; /* Unused */
+ };
+
+ clk_m_a1_div3: clk-m-a1-div3 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf3",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a1_osc_prediv>,
+ <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
+ <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
+
+ clock-output-names = "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ ""; /* Unused */
+ };
};
- CLKS_ETH1_PHY: clockgenA0@7 {
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
#clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- clock-output-names = "CLKS_ETH1_PHY";
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a0_div1 2>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ clockgen-a@fd345000 {
+ reg = <0xfd345000 0xb50>;
+
+ clk_m_a2_pll0: clk-m-a2-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a2-pll0-phi0",
+ "clk-m-a2-pll0-phi1",
+ "clk-m-a2-pll0-phi2",
+ "clk-m-a2-pll0-phi3";
+ };
+
+ clk_m_a2_pll1: clk-m-a2-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a2-pll1-phi0",
+ "clk-m-a2-pll1-phi1",
+ "clk-m-a2-pll1-phi2",
+ "clk-m-a2-pll1-phi3";
+ };
+
+ clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
+ #clock-cells = <0>;
+ compatible = "st,clkgena-prediv-c32",
+ "st,clkgena-prediv";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a2-osc-prediv";
+ };
+
+ clk_m_a2_div0: clk-m-a2-div0 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf0",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a2_osc_prediv>,
+ <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
+ <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
+
+ clock-output-names = "clk-m-vtac-main-phy",
+ "clk-m-vtac-aux-phy",
+ "clk-m-stac-phy",
+ "clk-m-stac-sys",
+ "", /* clk-m-mpestac-pg */
+ "", /* clk-m-mpestac-wc */
+ "", /* clk-m-mpevtacaux-pg*/
+ ""; /* clk-m-mpevtacmain-pg*/
+ };
+
+ clk_m_a2_div1: clk-m-a2-div1 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf1",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a2_osc_prediv>,
+ <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
+ <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
+
+ clock-output-names = "", /* clk-m-mpevtacrx0-wc */
+ "", /* clk-m-mpevtacrx1-wc */
+ "clk-m-compo-main",
+ "clk-m-compo-aux",
+ "clk-m-bdisp-0",
+ "clk-m-bdisp-1",
+ "clk-m-icn-bdisp-0",
+ "clk-m-icn-bdisp-1";
+ };
+
+ clk_m_a2_div2: clk-m-a2-div2 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf2",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a2_osc_prediv>,
+ <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
+ <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
+
+ clock-output-names = "", /* clk-m-icn-hqvdp0 */
+ "", /* clk-m-icn-hqvdp1 */
+ "clk-m-icn-compo",
+ "", /* clk-m-icn-vdpaux */
+ "clk-m-icn-ts",
+ "clk-m-icn-reg-lp-10",
+ "clk-m-dcephy-impctrl",
+ ""; /* Unused */
+ };
+
+ clk_m_a2_div3: clk-m-a2-div3 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf3",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a2_osc_prediv>,
+ <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
+ <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
+
+ clock-output-names = ""; /* Unused */
+ /* Remaining outputs unused */
+ };
+ };
+
+ /*
+ * A9 PLL
+ */
+ clockgen-a9@fdde00d8 {
+ reg = <0xfdde00d8 0x70>;
+
+ clockgen_a9_pll: clockgen-a9-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+ clock-output-names = "clockgen-a9-pll-odf";
+ };
+ };
+
+ /*
+ * ARM CPU related clocks
+ */
+ clk_m_a9: clk-m-a9@fdde00d8 {
+ #clock-cells = <0>;
+ compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux";
+ reg = <0xfdde00d8 0x4>;
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_m_a0_div1 2>,
+ <&clk_m_a9_ext2f_div2>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
};
};
diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index 81df870..8509a03 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -102,6 +102,22 @@
};
};
+ keyscan {
+ pinctrl_keyscan: keyscan {
+ st,pins {
+ keyin0 = <&PIO0 2 ALT2 IN>;
+ keyin1 = <&PIO0 3 ALT2 IN>;
+ keyin2 = <&PIO0 4 ALT2 IN>;
+ keyin3 = <&PIO2 6 ALT2 IN>;
+
+ keyout0 = <&PIO1 6 ALT2 OUT>;
+ keyout1 = <&PIO1 7 ALT2 OUT>;
+ keyout2 = <&PIO0 6 ALT2 OUT>;
+ keyout3 = <&PIO2 7 ALT2 OUT>;
+ };
+ };
+ };
+
sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins {
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
index d89064c..d6f254f 100644
--- a/arch/arm/boot/dts/stih415.dtsi
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -82,7 +82,7 @@
interrupts = <0 197 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial2>;
- clocks = <&CLKS_ICN_REG_0>;
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
};
/* SBC comms block ASCs in SASG1 */
@@ -91,7 +91,7 @@
status = "disabled";
reg = <0xfe531000 0x2c>;
interrupts = <0 210 0>;
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
};
@@ -100,7 +100,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0xfed40000 0x110>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CLKS_ICN_REG_0>;
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -113,7 +113,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0xfed41000 0x110>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CLKS_ICN_REG_0>;
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -126,7 +126,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0xfe540000 0x110>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -139,7 +139,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0xfe541000 0x110>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -170,7 +170,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
clock-names = "stmmaceth";
- clocks = <&CLKS_GMAC0_PHY>;
+ clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>;
};
ethernet1: dwmac@fef08000 {
@@ -193,18 +193,30 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii1>;
clock-names = "stmmaceth";
- clocks = <&CLKS_ETH1_PHY>;
+ clocks = <&clk_s_a0_ls CLK_ETH1_PHY>;
};
rc: rc@fe518000 {
compatible = "st,comms-irb";
reg = <0xfe518000 0x234>;
interrupts = <0 203 0>;
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
rx-mode = "infrared";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ir>;
resets = <&softreset STIH415_IRB_SOFTRESET>;
};
+
+ keyscan: keyscan@fe4b0000 {
+ compatible = "st,sti-keyscan";
+ status = "disabled";
+ reg = <0xfe4b0000 0x2000>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+ clocks = <&clk_sysin>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_keyscan>;
+ resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>,
+ <&softreset STIH415_KEYSCAN_SOFTRESET>;
+ };
};
};
diff --git a/arch/arm/boot/dts/stih416-b2000.dts b/arch/arm/boot/dts/stih416-b2000.dts
index a5eb6ee..488e80a 100644
--- a/arch/arm/boot/dts/stih416-b2000.dts
+++ b/arch/arm/boot/dts/stih416-b2000.dts
@@ -9,8 +9,7 @@
/dts-v1/;
#include "stih416.dtsi"
#include "stih41x-b2000.dtsi"
-
/ {
- compatible = "st,stih416", "st,stih416-b2000";
model = "STiH416 B2000";
+ compatible = "st,stih416-b2000", "st,stih416";
};
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
new file mode 100644
index 0000000..ba0fa2c
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih416.dtsi"
+#include "stih41x-b2020.dtsi"
+/ {
+ model = "STiH416 B2020 REV-E";
+ compatible = "st,stih416-b2020", "st,stih416";
+
+ soc {
+ leds {
+ compatible = "gpio-leds";
+ red {
+ #gpio-cells = <1>;
+ label = "Front Panel LED";
+ gpios = <&PIO4 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ gpios = <&PIO1 3>;
+ default-state = "off";
+ };
+ };
+
+ ethernet1: dwmac@fef08000 {
+ snps,reset-gpio = <&PIO0 7>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts
index 276f28d..4e2df66 100644
--- a/arch/arm/boot/dts/stih416-b2020.dts
+++ b/arch/arm/boot/dts/stih416-b2020.dts
@@ -11,6 +11,5 @@
#include "stih41x-b2020.dtsi"
/ {
model = "STiH416 B2020";
- compatible = "st,stih416", "st,stih416-b2020";
-
+ compatible = "st,stih416-b2020", "st,stih416";
};
diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi
index a6942c7..5b4fb83 100644
--- a/arch/arm/boot/dts/stih416-clock.dtsi
+++ b/arch/arm/boot/dts/stih416-clock.dtsi
@@ -6,50 +6,751 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#include <dt-bindings/clock/stih416-clks.h>
+
/ {
clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
/*
* Fixed 30MHz oscillator inputs to SoC
*/
- CLK_SYSIN: CLK_SYSIN {
+ clk_sysin: clk-sysin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <30000000>;
- clock-output-names = "CLK_SYSIN";
+ };
+
+ /*
+ * ClockGenAs on SASG2
+ */
+ clockgen-a@fee62000 {
+ reg = <0xfee62000 0xb48>;
+
+ clk_s_a0_pll: clk-s-a0-pll {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-plls-c65";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-pll0-hs",
+ "clk-s-a0-pll0-ls",
+ "clk-s-a0-pll1";
+ };
+
+ clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
+ #clock-cells = <0>;
+ compatible = "st,clkgena-prediv-c65",
+ "st,clkgena-prediv";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-osc-prediv";
+ };
+
+ clk_s_a0_hs: clk-s-a0-hs {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c65-hs",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_s_a0_osc_prediv>,
+ <&clk_s_a0_pll 0>, /* PLL0 HS */
+ <&clk_s_a0_pll 2>; /* PLL1 */
+
+ clock-output-names = "clk-s-fdma-0",
+ "clk-s-fdma-1",
+ ""; /* clk-s-jit-sense */
+ /* Fourth output unused */
+ };
+
+ clk_s_a0_ls: clk-s-a0-ls {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c65-ls",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_s_a0_osc_prediv>,
+ <&clk_s_a0_pll 1>, /* PLL0 LS */
+ <&clk_s_a0_pll 2>; /* PLL1 */
+
+ clock-output-names = "clk-s-icn-reg-0",
+ "clk-s-icn-if-0",
+ "clk-s-icn-reg-lp-0",
+ "clk-s-emiss",
+ "clk-s-eth1-phy",
+ "clk-s-mii-ref-out";
+ /* Remaining outputs unused */
+ };
+ };
+
+ clockgen-a@fee81000 {
+ reg = <0xfee81000 0xb48>;
+
+ clk_s_a1_pll: clk-s-a1-pll {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-plls-c65";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a1-pll0-hs",
+ "clk-s-a1-pll0-ls",
+ "clk-s-a1-pll1";
+ };
+
+ clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
+ #clock-cells = <0>;
+ compatible = "st,clkgena-prediv-c65",
+ "st,clkgena-prediv";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a1-osc-prediv";
+ };
+
+ clk_s_a1_hs: clk-s-a1-hs {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c65-hs",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_s_a1_osc_prediv>,
+ <&clk_s_a1_pll 0>, /* PLL0 HS */
+ <&clk_s_a1_pll 2>; /* PLL1 */
+
+ clock-output-names = "", /* Reserved */
+ "", /* Reserved */
+ "clk-s-stac-phy",
+ "clk-s-vtac-tx-phy";
+ };
+
+ clk_s_a1_ls: clk-s-a1-ls {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c65-ls",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_s_a1_osc_prediv>,
+ <&clk_s_a1_pll 1>, /* PLL0 LS */
+ <&clk_s_a1_pll 2>; /* PLL1 */
+
+ clock-output-names = "clk-s-icn-if-2",
+ "clk-s-card-mmc-0",
+ "clk-s-icn-if-1",
+ "clk-s-gmac0-phy",
+ "clk-s-nand-ctrl",
+ "", /* Reserved */
+ "clk-s-mii0-ref-out",
+ "clk-s-stac-sys",
+ "clk-s-card-mmc-1";
+ /* Remaining outputs unused */
+ };
+ };
+
+ /*
+ * ClockGenAs on MPE42
+ */
+ clockgen-a@fde12000 {
+ reg = <0xfde12000 0xb50>;
+
+ clk_m_a0_pll0: clk-m-a0-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a0-pll0-phi0",
+ "clk-m-a0-pll0-phi1",
+ "clk-m-a0-pll0-phi2",
+ "clk-m-a0-pll0-phi3";
+ };
+
+ clk_m_a0_pll1: clk-m-a0-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a0-pll1-phi0",
+ "clk-m-a0-pll1-phi1",
+ "clk-m-a0-pll1-phi2",
+ "clk-m-a0-pll1-phi3";
+ };
+
+ clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
+ #clock-cells = <0>;
+ compatible = "st,clkgena-prediv-c32",
+ "st,clkgena-prediv";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a0-osc-prediv";
+ };
+
+ clk_m_a0_div0: clk-m-a0-div0 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf0",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a0_osc_prediv>,
+ <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
+ <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
+
+ clock-output-names = "", /* Unused */
+ "", /* Unused */
+ "clk-m-fdma-12",
+ "", /* Unused */
+ "clk-m-pp-dmu-0",
+ "clk-m-pp-dmu-1",
+ "clk-m-icm-lmi",
+ "clk-m-vid-dmu-0";
+ };
+
+ clk_m_a0_div1: clk-m-a0-div1 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf1",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a0_osc_prediv>,
+ <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
+ <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
+
+ clock-output-names = "clk-m-vid-dmu-1",
+ "", /* Unused */
+ "clk-m-a9-ext2f",
+ "clk-m-st40rt",
+ "clk-m-st231-dmu-0",
+ "clk-m-st231-dmu-1",
+ "clk-m-st231-aud",
+ "clk-m-st231-gp-0";
+ };
+
+ clk_m_a0_div2: clk-m-a0-div2 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf2",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a0_osc_prediv>,
+ <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
+ <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
+
+ clock-output-names = "clk-m-st231-gp-1",
+ "clk-m-icn-cpu",
+ "clk-m-icn-stac",
+ "clk-m-tx-icn-dmu-0",
+ "clk-m-tx-icn-dmu-1",
+ "clk-m-tx-icn-ts",
+ "clk-m-icn-vdp-0",
+ "clk-m-icn-vdp-1";
+ };
+
+ clk_m_a0_div3: clk-m-a0-div3 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf3",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a0_osc_prediv>,
+ <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
+ <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
+
+ clock-output-names = "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "clk-m-icn-vp8",
+ "", /* Unused */
+ "clk-m-icn-reg-11",
+ "clk-m-a9-trace";
+ };
+ };
+
+ clockgen-a@fd6db000 {
+ reg = <0xfd6db000 0xb50>;
+
+ clk_m_a1_pll0: clk-m-a1-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a1-pll0-phi0",
+ "clk-m-a1-pll0-phi1",
+ "clk-m-a1-pll0-phi2",
+ "clk-m-a1-pll0-phi3";
+ };
+
+ clk_m_a1_pll1: clk-m-a1-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a1-pll1-phi0",
+ "clk-m-a1-pll1-phi1",
+ "clk-m-a1-pll1-phi2",
+ "clk-m-a1-pll1-phi3";
+ };
+
+ clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
+ #clock-cells = <0>;
+ compatible = "st,clkgena-prediv-c32",
+ "st,clkgena-prediv";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a1-osc-prediv";
+ };
+
+ clk_m_a1_div0: clk-m-a1-div0 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf0",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a1_osc_prediv>,
+ <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
+ <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
+
+ clock-output-names = "", /* Unused */
+ "clk-m-fdma-10",
+ "clk-m-fdma-11",
+ "clk-m-hva-alt",
+ "clk-m-proc-sc",
+ "clk-m-tp",
+ "clk-m-rx-icn-dmu-0",
+ "clk-m-rx-icn-dmu-1";
+ };
+
+ clk_m_a1_div1: clk-m-a1-div1 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf1",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a1_osc_prediv>,
+ <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+ <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+ clock-output-names = "clk-m-rx-icn-ts",
+ "clk-m-rx-icn-vdp-0",
+ "", /* Unused */
+ "clk-m-prv-t1-bus",
+ "clk-m-icn-reg-12",
+ "clk-m-icn-reg-10",
+ "", /* Unused */
+ "clk-m-icn-st231";
+ };
+
+ clk_m_a1_div2: clk-m-a1-div2 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf2",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a1_osc_prediv>,
+ <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
+ <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
+
+ clock-output-names = "clk-m-fvdp-proc-alt",
+ "clk-m-icn-reg-13",
+ "clk-m-tx-icn-gpu",
+ "clk-m-rx-icn-gpu",
+ "", /* Unused */
+ "", /* Unused */
+ "", /* clk-m-apb-pm-12 */
+ ""; /* Unused */
+ };
+
+ clk_m_a1_div3: clk-m-a1-div3 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf3",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a1_osc_prediv>,
+ <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
+ <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
+
+ clock-output-names = "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ "", /* Unused */
+ ""; /* clk-m-gpu-alt */
+ };
+ };
+
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a0_div1 2>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ clockgen-a@fd345000 {
+ reg = <0xfd345000 0xb50>;
+
+ clk_m_a2_pll0: clk-m-a2-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a2-pll0-phi0",
+ "clk-m-a2-pll0-phi1",
+ "clk-m-a2-pll0-phi2",
+ "clk-m-a2-pll0-phi3";
+ };
+
+ clk_m_a2_pll1: clk-m-a2-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a2-pll1-phi0",
+ "clk-m-a2-pll1-phi1",
+ "clk-m-a2-pll1-phi2",
+ "clk-m-a2-pll1-phi3";
+ };
+
+ clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
+ #clock-cells = <0>;
+ compatible = "st,clkgena-prediv-c32",
+ "st,clkgena-prediv";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-m-a2-osc-prediv";
+ };
+
+ clk_m_a2_div0: clk-m-a2-div0 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf0",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a2_osc_prediv>,
+ <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
+ <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
+
+ clock-output-names = "clk-m-vtac-main-phy",
+ "clk-m-vtac-aux-phy",
+ "clk-m-stac-phy",
+ "clk-m-stac-sys",
+ "", /* clk-m-mpestac-pg */
+ "", /* clk-m-mpestac-wc */
+ "", /* clk-m-mpevtacaux-pg*/
+ ""; /* clk-m-mpevtacmain-pg*/
+ };
+
+ clk_m_a2_div1: clk-m-a2-div1 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf1",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a2_osc_prediv>,
+ <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
+ <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
+
+ clock-output-names = "", /* clk-m-mpevtacrx0-wc */
+ "", /* clk-m-mpevtacrx1-wc */
+ "clk-m-compo-main",
+ "clk-m-compo-aux",
+ "clk-m-bdisp-0",
+ "clk-m-bdisp-1",
+ "clk-m-icn-bdisp",
+ "clk-m-icn-compo";
+ };
+
+ clk_m_a2_div2: clk-m-a2-div2 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf2",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a2_osc_prediv>,
+ <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
+ <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
+
+ clock-output-names = "clk-m-icn-vdp-2",
+ "", /* Unused */
+ "clk-m-icn-reg-14",
+ "clk-m-mdtp",
+ "clk-m-jpegdec",
+ "", /* Unused */
+ "clk-m-dcephy-impctrl",
+ ""; /* Unused */
+ };
+
+ clk_m_a2_div3: clk-m-a2-div3 {
+ #clock-cells = <1>;
+ compatible = "st,clkgena-divmux-c32-odf3",
+ "st,clkgena-divmux";
+
+ clocks = <&clk_m_a2_osc_prediv>,
+ <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
+ <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
+
+ clock-output-names = "", /* Unused */
+ ""; /* clk-m-apb-pm-11 */
+ /* Remaining outputs unused */
+ };
+ };
+
+ /*
+ * A9 PLL
+ */
+ clockgen-a9@fdde08b0 {
+ reg = <0xfdde08b0 0x70>;
+
+ clockgen_a9_pll: clockgen-a9-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+ clock-output-names = "clockgen-a9-pll-odf";
+ };
+ };
+
+ /*
+ * ARM CPU related clocks
+ */
+ clk_m_a9: clk-m-a9@fdde08ac {
+ #clock-cells = <0>;
+ compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux";
+ reg = <0xfdde08ac 0x4>;
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_m_a0_div1 2>,
+ <&clk_m_a9_ext2f_div2>;
};
/*
* ARM Peripheral clock for timers
*/
- arm_periph_clk: arm_periph_clk {
+ arm_periph_clk: clk-m-a9-periphs {
#clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <600000000>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
/*
- * Bootloader initialized system infrastructure clock for
- * serial devices.
+ * Frequency synthesizers on the SASG2
*/
- CLK_S_ICN_REG_0: clockgenA0@4 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- clock-output-names = "CLK_S_ICN_REG_0";
+ clockgen_b0: clockgen-b0@fee108b4 {
+ #clock-cells = <1>;
+ compatible = "st,stih416-quadfs216", "st,quadfs";
+ reg = <0xfee108b4 0x44>;
+
+ clocks = <&clk_sysin>;
+ clock-output-names = "clk-s-usb48",
+ "clk-s-dss",
+ "clk-s-stfe-frc-2",
+ "clk-s-thsens-scard";
};
- CLK_S_GMAC0_PHY: clockgenA1@7 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- clock-output-names = "CLK_S_GMAC0_PHY";
+ clockgen_b1: clockgen-b1@fe8308c4 {
+ #clock-cells = <1>;
+ compatible = "st,stih416-quadfs216", "st,quadfs";
+ reg = <0xfe8308c4 0x44>;
+
+ clocks = <&clk_sysin>;
+ clock-output-names = "clk-s-pcm-0",
+ "clk-s-pcm-1",
+ "clk-s-pcm-2",
+ "clk-s-pcm-3";
};
- CLK_S_ETH1_PHY: clockgenA0@7 {
+ clockgen_c: clockgen-c@fe8307d0 {
+ #clock-cells = <1>;
+ compatible = "st,stih416-quadfs432", "st,quadfs";
+ reg = <0xfe8307d0 0x44>;
+
+ clocks = <&clk_sysin>;
+ clock-output-names = "clk-s-c-fs0-ch0",
+ "clk-s-c-vcc-sd",
+ "clk-s-c-fs0-ch2";
+ };
+
+ clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 {
+ #clock-cells = <0>;
+ compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux";
+ reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */
+
+ clocks = <&clk_sysin>,
+ <&clockgen_c 0>;
+ };
+
+ /*
+ * Add a dummy clock for the HDMI PHY for the VCC input mux
+ */
+ clk_s_tmds_fromphy: clk-s-tmds-fromphy {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <25000000>;
- clock-output-names = "CLK_S_ETH1_PHY";
+ clock-frequency = <0>;
+ };
+
+ clockgen_c_vcc: clockgen-c-vcc@fe8308ac {
+ #clock-cells = <1>;
+ compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
+ reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */
+
+ clocks = <&clk_s_vcc_hd>,
+ <&clockgen_c 1>,
+ <&clk_s_tmds_fromphy>,
+ <&clockgen_c 2>;
+
+ clock-output-names = "clk-s-pix-hdmi",
+ "clk-s-pix-dvo",
+ "clk-s-out-dvo",
+ "clk-s-pix-hd",
+ "clk-s-hddac",
+ "clk-s-denc",
+ "clk-s-sddac",
+ "clk-s-pix-main",
+ "clk-s-pix-aux",
+ "clk-s-stfe-frc-0",
+ "clk-s-ref-mcru",
+ "clk-s-slave-mcru",
+ "clk-s-tmds-hdmi",
+ "clk-s-hdmi-reject-pll",
+ "clk-s-thsens";
+ };
+
+ clockgen_d: clockgen-d@fee107e0 {
+ #clock-cells = <1>;
+ compatible = "st,stih416-quadfs216", "st,quadfs";
+ reg = <0xfee107e0 0x44>;
+
+ clocks = <&clk_sysin>;
+ clock-output-names = "clk-s-ccsc",
+ "clk-s-stfe-frc-1",
+ "clk-s-tsout-1",
+ "clk-s-mchi";
+ };
+
+ /*
+ * Frequency synthesizers on the MPE42
+ */
+ clockgen_e: clockgen-e@fd3208bc {
+ #clock-cells = <1>;
+ compatible = "st,stih416-quadfs660-E", "st,quadfs";
+ reg = <0xfd3208bc 0xb0>;
+
+ clocks = <&clk_sysin>;
+ clock-output-names = "clk-m-pix-mdtp-0",
+ "clk-m-pix-mdtp-1",
+ "clk-m-pix-mdtp-2",
+ "clk-m-mpelpc";
+ };
+
+ clockgen_f: clockgen-f@fd320878 {
+ #clock-cells = <1>;
+ compatible = "st,stih416-quadfs660-F", "st,quadfs";
+ reg = <0xfd320878 0xf0>;
+
+ clocks = <&clk_sysin>;
+ clock-output-names = "clk-m-main-vidfs",
+ "clk-m-hva-fs",
+ "clk-m-fvdp-vcpu",
+ "clk-m-fvdp-proc-fs";
+ };
+
+ clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 {
+ #clock-cells = <0>;
+ compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux";
+ reg = <0xfd320910 0x4>; /* SYSCFG8580 */
+
+ clocks = <&clk_m_a1_div2 0>,
+ <&clockgen_f 3>;
+ };
+
+ clk_m_hva: clk-m-hva@fd690868 {
+ #clock-cells = <0>;
+ compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
+ reg = <0xfd690868 0x4>; /* SYSCFG9538 */
+
+ clocks = <&clockgen_f 1>,
+ <&clk_m_a1_div0 3>;
+ };
+
+ clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c {
+ #clock-cells = <0>;
+ compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux";
+ reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
+
+ clocks = <&clockgen_c_vcc 7>,
+ <&clockgen_f 0>;
+ };
+
+ clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c {
+ #clock-cells = <0>;
+ compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux";
+ reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
+
+ clocks = <&clockgen_c_vcc 8>,
+ <&clockgen_f 1>;
+ };
+
+ /*
+ * Add a dummy clock for the HDMIRx external signal clock
+ */
+ clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clockgen_f_vcc: clockgen-f-vcc@fd32086c {
+ #clock-cells = <1>;
+ compatible = "st,stih416-clkgenf", "st,clkgen-vcc";
+ reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */
+
+ clocks = <&clk_m_f_vcc_hd>,
+ <&clk_m_f_vcc_sd>,
+ <&clockgen_f 0>,
+ <&clk_m_pix_hdmirx_sas>;
+
+ clock-output-names = "clk-m-pix-main-pipe",
+ "clk-m-pix-aux-pipe",
+ "clk-m-pix-main-cru",
+ "clk-m-pix-aux-cru",
+ "clk-m-xfer-be-compo",
+ "clk-m-xfer-pip-compo",
+ "clk-m-xfer-aux-compo",
+ "clk-m-vsens",
+ "clk-m-pix-hdmirx-0",
+ "clk-m-pix-hdmirx-1";
+ };
+
+ /*
+ * DDR PLL
+ */
+ clockgen-ddr@0xfdde07d8 {
+ reg = <0xfdde07d8 0x110>;
+
+ clockgen_ddr_pll: clockgen-ddr-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+ clock-output-names = "clockgen-ddr0",
+ "clockgen-ddr1";
+ };
+ };
+
+ /*
+ * GPU PLL
+ */
+ clockgen-gpu@fd68ff00 {
+ reg = <0xfd68ff00 0x910>;
+
+ clockgen_gpu_pll: clockgen-gpu-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32";
+
+ clocks = <&clk_sysin>;
+ clock-output-names = "clockgen-gpu-pll";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 250d5ec..ee6c119 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -122,6 +122,22 @@
};
};
+ keyscan {
+ pinctrl_keyscan: keyscan {
+ st,pins {
+ keyin0 = <&PIO0 2 ALT2 IN>;
+ keyin1 = <&PIO0 3 ALT2 IN>;
+ keyin2 = <&PIO0 4 ALT2 IN>;
+ keyin3 = <&PIO2 6 ALT2 IN>;
+
+ keyout0 = <&PIO1 6 ALT2 OUT>;
+ keyout1 = <&PIO1 7 ALT2 OUT>;
+ keyout2 = <&PIO0 6 ALT2 OUT>;
+ keyout3 = <&PIO2 7 ALT2 OUT>;
+ };
+ };
+ };
+
sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins {
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 78746d2..06473c5 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -89,7 +89,7 @@
status = "disabled";
reg = <0xfed32000 0x2c>;
interrupts = <0 197 0>;
- clocks = <&CLK_S_ICN_REG_0>;
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>;
};
@@ -102,14 +102,14 @@
interrupts = <0 210 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
};
i2c@fed40000 {
compatible = "st,comms-ssc4-i2c";
reg = <0xfed40000 0x110>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CLK_S_ICN_REG_0>;
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -122,7 +122,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0xfed41000 0x110>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CLK_S_ICN_REG_0>;
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -135,7 +135,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0xfe540000 0x110>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -148,7 +148,7 @@
compatible = "st,comms-ssc4-i2c";
reg = <0xfe541000 0x110>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
clock-names = "ssc";
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -176,7 +176,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
clock-names = "stmmaceth";
- clocks = <&CLK_S_GMAC0_PHY>;
+ clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>;
};
ethernet1: dwmac@fef08000 {
@@ -198,7 +198,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii1>;
clock-names = "stmmaceth";
- clocks = <&CLK_S_ETH1_PHY>;
+ clocks = <&clk_s_a0_ls CLK_ETH1_PHY>;
};
rc: rc@fe518000 {
@@ -206,7 +206,7 @@
reg = <0xfe518000 0x234>;
interrupts = <0 203 0>;
rx-mode = "infrared";
- clocks = <&CLK_SYSIN>;
+ clocks = <&clk_sysin>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ir>;
resets = <&softreset STIH416_IRB_SOFTRESET>;
@@ -224,5 +224,17 @@
status = "disabled";
};
+
+ keyscan: keyscan@fe4b0000 {
+ compatible = "st,sti-keyscan";
+ status = "disabled";
+ reg = <0xfe4b0000 0x2000>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+ clocks = <&clk_sysin>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_keyscan>;
+ resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
+ <&softreset STIH416_KEYSCAN_SOFTRESET>;
+ };
};
};
diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
index bf65c49..b3dd6ca 100644
--- a/arch/arm/boot/dts/stih41x-b2000.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
@@ -6,6 +6,7 @@
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
+#include <dt-bindings/input/input.h>
/ {
memory{
@@ -14,7 +15,7 @@
};
chosen {
- bootargs = "console=ttyAS0,115200";
+ bootargs = "console=ttyAS0,115200 clk_ignore_unused";
linux,stdout-path = &serial2;
};
@@ -68,5 +69,27 @@
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
};
+
+ keyscan: keyscan@fe4b0000 {
+ keypad,num-rows = <4>;
+ keypad,num-columns = <4>;
+ st,debounce-us = <5000>;
+ linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
+ MATRIX_KEY(0x00, 0x01, KEY_F9)
+ MATRIX_KEY(0x00, 0x02, KEY_F5)
+ MATRIX_KEY(0x00, 0x03, KEY_F1)
+ MATRIX_KEY(0x01, 0x00, KEY_F14)
+ MATRIX_KEY(0x01, 0x01, KEY_F10)
+ MATRIX_KEY(0x01, 0x02, KEY_F6)
+ MATRIX_KEY(0x01, 0x03, KEY_F2)
+ MATRIX_KEY(0x02, 0x00, KEY_F15)
+ MATRIX_KEY(0x02, 0x01, KEY_F11)
+ MATRIX_KEY(0x02, 0x02, KEY_F7)
+ MATRIX_KEY(0x02, 0x03, KEY_F3)
+ MATRIX_KEY(0x03, 0x00, KEY_F16)
+ MATRIX_KEY(0x03, 0x01, KEY_F12)
+ MATRIX_KEY(0x03, 0x02, KEY_F8)
+ MATRIX_KEY(0x03, 0x03, KEY_F4) >;
+ };
};
};
diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
index 838513f..d8a8429 100644
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -14,7 +14,7 @@
};
chosen {
- bootargs = "console=ttyAS0,115200";
+ bootargs = "console=ttyAS0,115200 clk_ignore_unused";
linux,stdout-path = &sbc_serial1;
};
diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi
index f5b9898..5cb0e63 100644
--- a/arch/arm/boot/dts/stih41x.dtsi
+++ b/arch/arm/boot/dts/stih41x.dtsi
@@ -1,3 +1,10 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
/ {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index fa746aea..0b97c07 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -36,6 +36,16 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 4684cbe..c200eac 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -34,6 +34,16 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index d7c17e4..547fadc 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -36,6 +36,16 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index fe9272e..f13723e 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -24,6 +24,16 @@
};
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index dd84a9e..c01cea5 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -20,6 +20,16 @@
compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 66cf0c7..d46a7db 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -33,6 +33,16 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 255b47e..fb03bcc 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -34,6 +34,16 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 9174724..c7b794e 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -377,6 +377,42 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <34>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun4i-a10-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <35>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
@@ -477,6 +513,20 @@
#size-cells = <0>;
#gpio-cells = <3>;
+ pwm0_pins_a: pwm0@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "pwm";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ pwm1_pins_a: pwm1@0 {
+ allwinner,pins = "PI3";
+ allwinner,function = "pwm";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
@@ -529,6 +579,20 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
};
timer@01c20c00 {
@@ -549,6 +613,14 @@
interrupts = <24>;
};
+ pwm: pwm@01c20e00 {
+ compatible = "allwinner,sun4i-a10-pwm";
+ reg = <0x01c20e00 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
@@ -647,6 +719,8 @@
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c1: i2c@01c2b000 {
@@ -656,6 +730,8 @@
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c2: i2c@01c2b400 {
@@ -665,6 +741,8 @@
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
};
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 23611b7..ea9519d 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -35,6 +35,26 @@
};
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 0>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ mmc1: mmc@01c10000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 13 0>; /* PG13 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
status = "okay";
@@ -49,6 +69,20 @@
};
pinctrl@01c20800 {
+ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+ allwinner,pins = "PG13";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PE3";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
new file mode 100644
index 0000000..43a9376
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a10s.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "R7 A10s hdmi tv-stick";
+ compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
+
+ soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 0>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ mmc1: mmc@01c10000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+ };
+
+ usbphy: phy@01c13400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c14000 {
+ status = "okay";
+ };
+
+ ohci0: usb@01c14400 {
+ status = "okay";
+ };
+
+ pinctrl@01c20800 {
+ mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ led_pins_r7: led_pins@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <1>;
+ allwinner,pull = <0>;
+ };
+
+ usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+ allwinner,pins = "PG13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_r7>;
+
+ green {
+ label = "r7-tv-dongle:green:usr";
+ gpios = <&pio 1 2 0>;
+ default-state = "on";
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ pinctrl-0 = <&usb1_vbus_pin_r7>;
+ gpio = <&pio 6 13 0>;
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 79989ed..aa1dd59 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -338,6 +338,33 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <34>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun5i-a13-usb-phy";
@@ -451,6 +478,20 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
+ allwinner,function = "mmc1";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index 11169d5..fa44b02 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -21,6 +21,16 @@
compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 0>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
status = "okay";
@@ -35,6 +45,13 @@
};
pinctrl@01c20800 {
+ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxinom: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 7a9187b..429994e 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -20,6 +20,16 @@
compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 0>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
status = "okay";
@@ -34,6 +44,13 @@
};
pinctrl@01c20800 {
+ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index f01c315..c9fdb7b 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -320,6 +320,24 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <34>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun5i-a13-usb-phy";
@@ -415,6 +433,13 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
@@ -467,6 +492,8 @@
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c1: i2c@01c2b000 {
@@ -476,6 +503,8 @@
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c2: i2c@01c2b400 {
@@ -485,6 +514,8 @@
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
timer@01c60000 {
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
new file mode 100644
index 0000000..2bbf886
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2014 Boris Brezillon
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Allwinner A31 APP4 EVB1 Evaluation Board";
+ compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS0,115200";
+ };
+
+ soc@01c00000 {
+ pio: pinctrl@01c20800 {
+ usb1_vbus_pin_a: usb1_vbus_pin@0 {
+ allwinner,pins = "PH27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ usbphy: phy@01c19400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c1a000 {
+ status = "okay";
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ pinctrl-0 = <&usb1_vbus_pin_a>;
+ gpio = <&pio 7 27 0>;
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
new file mode 100644
index 0000000..bc6115d
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Mele M9 / A1000G Quad top set box";
+ compatible = "mele,m9", "allwinner,sun6i-a31";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS0,115200";
+ };
+
+ soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 22 0>; /* PH22 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ pio: pinctrl@01c20800 {
+ mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index d45efa7..2ad880c 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -59,6 +59,14 @@
reg = <0x40000000 0x80000000>;
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+ interrupts = <0 120 4>,
+ <0 121 4>,
+ <0 122 4>,
+ <0 123 4>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -198,6 +206,38 @@
"apb2_uart4", "apb2_uart5";
};
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "mmc2";
+ };
+
+ mmc3_clk: clk@01c20094 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20094 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "mmc3";
+ };
+
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
@@ -229,6 +269,17 @@
clocks = <&osc24M>, <&pll6>;
clock-output-names = "spi3";
};
+
+ usb_clk: clk@01c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
+ "usb_ohci0", "usb_ohci1",
+ "usb_ohci2";
+ };
};
soc@01c00000 {
@@ -237,12 +288,134 @@
#size-cells = <1>;
ranges;
- nmi_intc: interrupt-controller@01f00c0c {
- compatible = "allwinner,sun6i-a31-sc-nmi";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x01f00c0c 0x38>;
- interrupts = <0 32 4>;
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun6i-a31-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <0 50 4>;
+ clocks = <&ahb1_gates 6>;
+ resets = <&ahb1_rst 6>;
+ #dma-cells = <1>;
+ };
+
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb1_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ resets = <&ahb1_rst 8>;
+ reset-names = "ahb";
+ interrupts = <0 60 4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb1_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mmc";
+ resets = <&ahb1_rst 9>;
+ reset-names = "ahb";
+ interrupts = <0 61 4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb1_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mmc";
+ resets = <&ahb1_rst 10>;
+ reset-names = "ahb";
+ interrupts = <0 62 4>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb1_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mmc";
+ resets = <&ahb1_rst 11>;
+ reset-names = "ahb";
+ interrupts = <0 63 4>;
+ status = "disabled";
+ };
+
+ usbphy: phy@01c19400 {
+ compatible = "allwinner,sun6i-a31-usb-phy";
+ reg = <0x01c19400 0x10>,
+ <0x01c1a800 0x4>,
+ <0x01c1b800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu1",
+ "pmu2";
+ clocks = <&usb_clk 8>,
+ <&usb_clk 9>,
+ <&usb_clk 10>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy";
+ resets = <&usb_clk 0>,
+ <&usb_clk 1>,
+ <&usb_clk 2>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci0: usb@01c1a000 {
+ compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <0 72 4>;
+ clocks = <&ahb1_gates 26>;
+ resets = <&ahb1_rst 26>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@01c1a400 {
+ compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <0 73 4>;
+ clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+ resets = <&ahb1_rst 29>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci1: usb@01c1b000 {
+ compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+ reg = <0x01c1b000 0x100>;
+ interrupts = <0 74 4>;
+ clocks = <&ahb1_gates 27>;
+ resets = <&ahb1_rst 27>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@01c1b400 {
+ compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+ reg = <0x01c1b400 0x100>;
+ interrupts = <0 75 4>;
+ clocks = <&ahb1_gates 30>, <&usb_clk 17>;
+ resets = <&ahb1_rst 30>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@01c1c000 {
+ compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <0 77 4>;
+ clocks = <&ahb1_gates 31>, <&usb_clk 18>;
+ resets = <&ahb1_rst 31>;
+ status = "disabled";
};
pio: pinctrl@01c20800 {
@@ -286,6 +459,13 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
ahb1_rst: reset@01c202c0 {
@@ -330,6 +510,8 @@
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
resets = <&apb2_rst 16>;
+ dmas = <&dma 6>, <&dma 6>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -341,6 +523,8 @@
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
resets = <&apb2_rst 17>;
+ dmas = <&dma 7>, <&dma 7>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -352,6 +536,8 @@
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
resets = <&apb2_rst 18>;
+ dmas = <&dma 8>, <&dma 8>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -363,6 +549,8 @@
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
resets = <&apb2_rst 19>;
+ dmas = <&dma 9>, <&dma 9>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -374,6 +562,8 @@
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
resets = <&apb2_rst 20>;
+ dmas = <&dma 10>, <&dma 10>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -385,6 +575,8 @@
reg-io-width = <4>;
clocks = <&apb2_gates 21>;
resets = <&apb2_rst 21>;
+ dmas = <&dma 22>, <&dma 22>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -434,6 +626,8 @@
interrupts = <0 65 4>;
clocks = <&ahb1_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
resets = <&ahb1_rst 20>;
status = "disabled";
};
@@ -444,6 +638,8 @@
interrupts = <0 66 4>;
clocks = <&ahb1_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
+ dmas = <&dma 24>, <&dma 24>;
+ dma-names = "rx", "tx";
resets = <&ahb1_rst 21>;
status = "disabled";
};
@@ -454,6 +650,8 @@
interrupts = <0 67 4>;
clocks = <&ahb1_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
+ dmas = <&dma 25>, <&dma 25>;
+ dma-names = "rx", "tx";
resets = <&ahb1_rst 22>;
status = "disabled";
};
@@ -464,6 +662,8 @@
interrupts = <0 68 4>;
clocks = <&ahb1_gates 23>, <&spi3_clk>;
clock-names = "ahb", "mod";
+ dmas = <&dma 26>, <&dma 26>;
+ dma-names = "rx", "tx";
resets = <&ahb1_rst 23>;
status = "disabled";
};
@@ -479,14 +679,74 @@
interrupts = <1 9 0xf04>;
};
+ nmi_intc: interrupt-controller@01f00c0c {
+ compatible = "allwinner,sun6i-a31-sc-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01f00c0c 0x38>;
+ interrupts = <0 32 4>;
+ };
+
+ prcm@01f01400 {
+ compatible = "allwinner,sun6i-a31-prcm";
+ reg = <0x01f01400 0x200>;
+
+ ar100: ar100_clk {
+ compatible = "allwinner,sun6i-a31-ar100-clk";
+ #clock-cells = <0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+ clock-output-names = "ar100";
+ };
+
+ ahb0: ahb0_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&ar100>;
+ clock-output-names = "ahb0";
+ };
+
+ apb0: apb0_clk {
+ compatible = "allwinner,sun6i-a31-apb0-clk";
+ #clock-cells = <0>;
+ clocks = <&ahb0>;
+ clock-output-names = "apb0";
+ };
+
+ apb0_gates: apb0_gates_clk {
+ compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+ #clock-cells = <1>;
+ clocks = <&apb0>;
+ clock-output-names = "apb0_pio", "apb0_ir",
+ "apb0_timer", "apb0_p2wi",
+ "apb0_uart", "apb0_1wire",
+ "apb0_i2c";
+ };
+
+ apb0_rst: apb0_rst {
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ #reset-cells = <1>;
+ };
+ };
+
cpucfg@01f01c00 {
compatible = "allwinner,sun6i-a31-cpuconfig";
reg = <0x01f01c00 0x300>;
};
- prcm@01f01c00 {
- compatible = "allwinner,sun6i-a31-prcm";
- reg = <0x01f01400 0x200>;
+ r_pio: pinctrl@01f02c00 {
+ compatible = "allwinner,sun6i-a31-r-pinctrl";
+ reg = <0x01f02c00 0x400>;
+ interrupts = <0 45 4>,
+ <0 46 4>;
+ clocks = <&apb0_gates 0>;
+ resets = <&apb0_rst 0>;
+ gpio-controller;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
};
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 68de89f..a5ad945 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -20,6 +20,16 @@
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index cb25d3c..b7e79d0 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -20,6 +20,24 @@
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ mmc3: mmc@01c12000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <®_vmmc3>;
+ non-removable;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
@@ -48,6 +66,18 @@
};
pinctrl@01c20800 {
+ mmc3_pins_a: mmc3@0 {
+ /* AP6210 requires pull-up */
+ allwinner,pull = <1>;
+ };
+
+ vmmc3_pin_cubietruck: vmmc3_pin@0 {
+ allwinner,pins = "PH9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
@@ -63,6 +93,12 @@
};
};
+ pwm: pwm@01c20e00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+ status = "okay";
+ };
+
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
@@ -139,4 +175,15 @@
reg_usb2_vbus: usb2-vbus {
status = "okay";
};
+
+ reg_vmmc3: vmmc3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc3_pin_cubietruck>;
+ regulator-name = "vmmc3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 7 9 0>;
+ };
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index eeadf76..b759630 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -31,6 +31,26 @@
status = "okay";
};
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ mmc3: mmc@01c12000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 11 0>; /* PH11 */
+ cd-inverted;
+ status = "okay";
+ };
+
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
@@ -65,6 +85,13 @@
};
pinctrl@01c20800 {
+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 32efc10..56df970 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -57,6 +57,12 @@
<1 10 0xf08>;
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+ interrupts = <0 120 4>,
+ <0 121 4>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -447,6 +453,42 @@
#size-cells = <0>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 32 4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 33 4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 34 4>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
+ clock-names = "ahb", "mmc";
+ interrupts = <0 35 4>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
@@ -540,6 +582,20 @@
#size-cells = <0>;
#gpio-cells = <3>;
+ pwm0_pins_a: pwm0@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "pwm";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ pwm1_pins_a: pwm1@0 {
+ allwinner,pins = "PI3";
+ allwinner,function = "pwm";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
@@ -653,6 +709,27 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ mmc3_pins_a: mmc3@0 {
+ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+ allwinner,function = "mmc3";
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
@@ -678,6 +755,14 @@
interrupts = <0 24 4>;
};
+ pwm: pwm@01c20e00 {
+ compatible = "allwinner,sun7i-a20-pwm";
+ reg = <0x01c20e00 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
@@ -776,6 +861,8 @@
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c1: i2c@01c2b000 {
@@ -785,6 +872,8 @@
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c2: i2c@01c2b400 {
@@ -794,6 +883,8 @@
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c3: i2c@01c2b800 {
@@ -803,6 +894,8 @@
clocks = <&apb1_gates 3>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
i2c4: i2c@01c2bc00 {
@@ -812,6 +905,8 @@
clocks = <&apb1_gates 15>;
clock-frequency = <100000>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
gmac: ethernet@01c50000 {
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index 18eeac0..026bd83 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -72,4 +72,11 @@
gpio = <&pio 7 3 0>;
status = "disabled";
};
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index a288a128..5c21d21 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -25,6 +25,7 @@
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <&vdd_5v0_hdmi>;
vdd-supply = <&vdd_hdmi_reg>;
pll-supply = <&palmas_smps3_reg>;
@@ -36,6 +37,8 @@
dsi@54300000 {
status = "okay";
+ avdd-dsi-csi-supply = <&avdd_1v2_reg>;
+
panel@0 {
compatible = "panasonic,vvx10f004b00",
"simple-panel";
@@ -982,12 +985,10 @@
regulator-max-microvolt = <2800000>;
};
- ldo3 {
+ avdd_1v2_reg: ldo3 {
regulator-name = "avdd-dsi-csi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
};
ldo4 {
@@ -1105,6 +1106,7 @@
sdhci@78000400 {
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "okay";
};
@@ -1231,8 +1233,6 @@
regulator-name = "vdd_hdmi_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
vin-supply = <&tps65090_dcdc1_reg>;
};
@@ -1245,6 +1245,17 @@
enable-active-high;
gpio = <&palmas_gpio 6 0>;
};
+
+ vdd_5v0_hdmi: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "VDD_5V0_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&tps65090_dcdc1_reg>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
new file mode 100644
index 0000000..0b0e8e0
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -0,0 +1,1113 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+ model = "NVIDIA SHIELD";
+ compatible = "nvidia,roth", "nvidia,tegra114";
+
+ chosen {
+ /* SHIELD's bootloader's arguments need to be overridden */
+ bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1";
+ /* SHIELD's bootloader will place initrd at this address */
+ linux,initrd-start = <0x82000000>;
+ linux,initrd-end = <0x82800000>;
+ };
+
+ firmware {
+ trusted-foundations {
+ compatible = "tlm,trusted-foundations";
+ tlm,version-major = <2>;
+ tlm,version-minor = <8>;
+ };
+ };
+
+ memory {
+ /* memory >= 0x79600000 is reserved for firmware usage */
+ reg = <0x80000000 0x79600000>;
+ };
+
+ pinmux@70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ clk1_out_pw4 {
+ nvidia,pins = "clk1_out_pw4";
+ nvidia,function = "extperiph1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap1_din_pn1 {
+ nvidia,pins = "dap1_din_pn1";
+ nvidia,function = "i2s0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap1_dout_pn2 {
+ nvidia,pins = "dap1_dout_pn2",
+ "dap1_fs_pn0",
+ "dap1_sclk_pn3";
+ nvidia,function = "i2s0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap2_din_pa4 {
+ nvidia,pins = "dap2_din_pa4";
+ nvidia,function = "i2s1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap2_dout_pa5 {
+ nvidia,pins = "dap2_dout_pa5",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3";
+ nvidia,function = "i2s1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap4_din_pp5 {
+ nvidia,pins = "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7";
+ nvidia,function = "i2s3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dvfs_pwm_px0 {
+ nvidia,pins = "dvfs_pwm_px0",
+ "dvfs_clk_px2";
+ nvidia,function = "cldvfs";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ulpi_clk_py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi_dir_py1 {
+ nvidia,pins = "ulpi_dir_py1",
+ "ulpi_nxt_py2";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi_stp_py3 {
+ nvidia,pins = "ulpi_stp_py3";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ cam_i2c_scl_pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ cam_mclk_pcc0 {
+ nvidia,pins = "cam_mclk_pcc0",
+ "pbb0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ pbb4 {
+ nvidia,pins = "pbb4";
+ nvidia,function = "vgp4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ gen2_i2c_scl_pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6";
+ nvidia,function = "i2c2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ gmi_a16_pj7 {
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a19_pk7";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi_a17_pb0 {
+ nvidia,pins = "gmi_a17_pb0",
+ "gmi_a18_pb1";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi_ad5_pg5 {
+ nvidia,pins = "gmi_ad5_pg5",
+ "gmi_wr_n_pi0";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi_ad6_pg6 {
+ nvidia,pins = "gmi_ad6_pg6",
+ "gmi_ad7_pg7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi_ad12_ph4 {
+ nvidia,pins = "gmi_ad12_ph4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi_cs6_n_pi13 {
+ nvidia,pins = "gmi_cs6_n_pi3";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi_ad9_ph1 {
+ nvidia,pins = "gmi_ad9_ph1";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi_cs1_n_pj2 {
+ nvidia,pins = "gmi_cs1_n_pj2",
+ "gmi_oe_n_pi1";
+ nvidia,function = "soc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi_rst_n_pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi_iordy_pi5 {
+ nvidia,pins = "gmi_iordy_pi5";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk2_out_pw5 {
+ nvidia,pins = "clk2_out_pw5";
+ nvidia,function = "extperiph2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1_clk_pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc1_cmd_pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3_cmd_pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_cd_n_pv2",
+ "sdmmc3_clk_lb_out_pee4",
+ "sdmmc3_clk_lb_in_pee5";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_col4_pq4 {
+ nvidia,pins = "kb_col4_pq4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc4_cmd_pt7 {
+ nvidia,pins = "sdmmc4_cmd_pt7",
+ "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk_32k_out_pa0 {
+ nvidia,pins = "clk_32k_out_pa0";
+ nvidia,function = "blink";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_col0_pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_col2_pq2",
+ "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row8_ps0";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row7_pr7 {
+ nvidia,pins = "kb_row7_pr7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row10_ps2 {
+ nvidia,pins = "kb_row10_ps2";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row9_ps1 {
+ nvidia,pins = "kb_row9_ps1";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pwr_i2c_scl_pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ sys_clk_req_pz5 {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "sysclk";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ core_pwr_req {
+ nvidia,pins = "core_pwr_req";
+ nvidia,function = "pwron";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ cpu_pwr_req {
+ nvidia,pins = "cpu_pwr_req";
+ nvidia,function = "cpu";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pwr_int_n {
+ nvidia,pins = "pwr_int_n";
+ nvidia,function = "pmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ reset_out_n {
+ nvidia,pins = "reset_out_n";
+ nvidia,function = "reset_out_n";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ clk3_out_pee0 {
+ nvidia,pins = "clk3_out_pee0";
+ nvidia,function = "extperiph3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gen1_i2c_scl_pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ uart2_cts_n_pj5 {
+ nvidia,pins = "uart2_cts_n_pj5";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ uart2_rts_n_pj6 {
+ nvidia,pins = "uart2_rts_n_pj6";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart2_rxd_pc3 {
+ nvidia,pins = "uart2_rxd_pc3";
+ nvidia,function = "irda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ uart2_txd_pc2 {
+ nvidia,pins = "uart2_txd_pc2";
+ nvidia,function = "irda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart3_cts_n_pa1 {
+ nvidia,pins = "uart3_cts_n_pa1",
+ "uart3_rxd_pw7";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ uart3_rts_n_pc0 {
+ nvidia,pins = "uart3_rts_n_pc0",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "owr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ hdmi_cec_pee3 {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ ddc_scl_pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+ };
+ spdif_in_pk6 {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "usb";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ usb_vbus_en0_pn4 {
+ nvidia,pins = "usb_vbus_en0_pn4";
+ nvidia,function = "usb";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ gpio_x6_aud_px6 {
+ nvidia,pins = "gpio_x6_aud_px6";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gpio_x1_aud_px1 {
+ nvidia,pins = "gpio_x1_aud_px1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gpio_x7_aud_px7 {
+ nvidia,pins = "gpio_x7_aud_px7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi_adv_n_pk0 {
+ nvidia,pins = "gmi_adv_n_pk0";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi_cs0_n_pj0 {
+ nvidia,pins = "gmi_cs0_n_pj0";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pu3 {
+ nvidia,pins = "pu3";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gpio_x4_aud_px4 {
+ nvidia,pins = "gpio_x4_aud_px4",
+ "gpio_x5_aud_px5";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gpio_x3_aud_px3 {
+ nvidia,pins = "gpio_x3_aud_px3";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gpio_w2_aud_pw2 {
+ nvidia,pins = "gpio_w2_aud_pw2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gpio_w3_aud_pw3 {
+ nvidia,pins = "gpio_w3_aud_pw3";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap3_fs_pp0 {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_din_pp1",
+ "dap3_dout_pp2",
+ "dap3_sclk_pp3";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pv0 {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pv1 {
+ nvidia,pins = "pv1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3",
+ "pbb5",
+ "pbb6",
+ "pbb7";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pcc1 {
+ nvidia,pins = "pcc1",
+ "pcc2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi_ad0_pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad1_pg1";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi_ad10_ph2 {
+ nvidia,pins = "gmi_ad10_ph2",
+ "gmi_ad12_ph4",
+ "gmi_ad15_ph7",
+ "gmi_cs3_n_pk4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi_ad11_ph3 {
+ nvidia,pins = "gmi_ad11_ph3",
+ "gmi_ad13_ph5",
+ "gmi_ad8_ph0",
+ "gmi_clk_pk1",
+ "gmi_cs2_n_pk3";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi_ad14_ph6 {
+ nvidia,pins = "gmi_ad14_ph6",
+ "gmi_cs0_n_pj0",
+ "gmi_cs4_n_pk2",
+ "gmi_cs7_n_pi6",
+ "gmi_dqs_p_pj3",
+ "gmi_wp_n_pc7";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi_ad2_pg2 {
+ nvidia,pins = "gmi_ad2_pg2",
+ "gmi_ad3_pg3";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1_wp_n_pv3 {
+ nvidia,pins = "sdmmc1_wp_n_pv3";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ clk2_req_pcc5 {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_col3_pq3 {
+ nvidia,pins = "kb_col3_pq3";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_col5_pq5 {
+ nvidia,pins = "kb_col5_pq5";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_col6_pq6 {
+ nvidia,pins = "kb_col6_pq6",
+ "kb_col7_pq7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row3_pr3 {
+ nvidia,pins = "kb_row3_pr3",
+ "kb_row4_pr4",
+ "kb_row6_pr6";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk3_req_pee1 {
+ nvidia,pins = "clk3_req_pee1";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pu2 {
+ nvidia,pins = "pu2";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ hdmi_int_pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ drive_sdio1 {
+ nvidia,pins = "drive_sdio1";
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <36>;
+ nvidia,pull-up-strength = <20>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+ };
+ drive_sdio3 {
+ nvidia,pins = "drive_sdio3";
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <36>;
+ nvidia,pull-up-strength = <20>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ };
+ drive_gma {
+ nvidia,pins = "drive_gma";
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <2>;
+ nvidia,pull-up-strength = <2>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,drive-type = <1>;
+ };
+ };
+ };
+
+ /* Usable on reworked devices only */
+ serial@70006300 {
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ regulator@43 {
+ compatible = "ti,tps51632";
+ reg = <0x43>;
+ regulator-name = "vdd-cpu";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1520000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ palmas: pmic@58 {
+ compatible = "ti,palmas";
+ reg = <0x58>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ palmas_gpio: gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pmic {
+ compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+ regulators {
+ smps12 {
+ regulator-name = "vdd-ddr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8: smps3 {
+ regulator-name = "vdd-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps457 {
+ regulator-name = "vdd-soc";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8 {
+ regulator-name = "avdd-pll-1v05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9 {
+ regulator-name = "vdd-2v85-emmc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ smps10_out1 {
+ regulator-name = "vdd-fan";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps10_out2 {
+ regulator-name = "vdd-5v0-sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2 {
+ regulator-name = "vdd-2v8-display";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ };
+
+ ldo3 {
+ regulator-name = "avdd-1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4 {
+ regulator-name = "vpp-fuse";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5 {
+ regulator-name = "avdd-hdmi-pll";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo6 {
+ regulator-name = "vdd-sensor-2v8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ ldo8 {
+ regulator-name = "vdd-rtc";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,enable-ldo8-tracking;
+ };
+
+ vddio_sdmmc3: ldo9 {
+ regulator-name = "vddio-sdmmc3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb {
+ regulator-name = "avdd-usb-hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3_sys: regen1 {
+ regulator-name = "rail-3v3";
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ regen2 {
+ regulator-name = "rail-5v0";
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ };
+ };
+
+ rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&palmas>;
+ interrupts = <8 0>;
+ };
+
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ };
+
+ /* SD card */
+ sdhci@78000400 {
+ status = "okay";
+ bus-width = <4>;
+ vmmc-supply = <&vddio_sdmmc3>;
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+ };
+
+ /* eMMC */
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ vmmc-supply = <&vdd_1v8>;
+ non-removable;
+ };
+
+ /* External USB port (must be powered) */
+ usb@7d000000 {
+ status = "okay";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ nvidia,xcvr-setup = <7>;
+ nvidia,xcvr-lsfslew = <2>;
+ nvidia,xcvr-lsrslew = <2>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ /* Should be changed to "otg" once we have vbus_supply */
+ /* As of now, USB devices need to be powered externally */
+ dr_mode = "host";
+ };
+
+ /* SHIELD controller */
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ nvidia,xcvr-setup = <7>;
+ nvidia,xcvr-lsfslew = <2>;
+ nvidia,xcvr-lsrslew = <2>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 1 40000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+
+ power-supply = <&lcd_bl_en>;
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ back {
+ label = "Back";
+ gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd_bl_en: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "lcd_bl_en";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_lcd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vdd_1v8>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_1v8_ts";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
+ regulator-boot-on;
+ };
+
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd_3v3_ts";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ };
+
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "vdd_1v8_com";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vdd_1v8>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ };
+
+ regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vdd_3v3_com";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3_sys>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
new file mode 100644
index 0000000..9636621
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -0,0 +1,348 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+ model = "Tegra Note 7";
+ compatible = "nvidia,tn7", "nvidia,tegra114";
+
+ chosen {
+ /* TN7's bootloader's arguments need to be overridden */
+ bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
+ /* TN7's bootloader will place initrd at this address */
+ linux,initrd-start = <0x82000000>;
+ linux,initrd-end = <0x82800000>;
+ };
+
+ firmware {
+ trusted-foundations {
+ compatible = "tlm,trusted-foundations";
+ tlm,version-major = <2>;
+ tlm,version-minor = <8>;
+ };
+ };
+
+ memory {
+ /* memory >= 0x37e00000 is reserved for firmware usage */
+ reg = <0x80000000 0x37e00000>;
+ };
+
+ host1x@50000000 {
+ dsi@54300000 {
+ status = "okay";
+
+ vdd-supply = <&vdd_1v2_ap>;
+
+ panel@0 {
+ compatible = "lg,ld070wx3-sl01";
+ reg = <0>;
+
+ power-supply = <&vdd_lcd>;
+ backlight = <&backlight>;
+ };
+ };
+ };
+
+ serial@70006300 {
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ palmas: pmic@58 {
+ compatible = "ti,palmas";
+ reg = <0x58>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ palmas_gpio: gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pmic {
+ compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+ ldoln-in-supply = <&vdd_smps10_out2>;
+
+ regulators {
+ smps123 {
+ regulator-name = "vd-cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45 {
+ regulator-name = "vd-soc";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6 {
+ regulator-name = "va-lcd-hv";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7 {
+ regulator-name = "vd-ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8: smps8 {
+ regulator-name = "vs-pmu-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_2v9_sys: smps9 {
+ regulator-name = "vs-sys-2v9";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_smps10_out1: smps10_out1 {
+ regulator-name = "vd-smps10-out1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_smps10_out2: smps10_out2 {
+ regulator-name = "vd-smps10-out2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1 {
+ regulator-name = "va-pllx";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v2_ap: ldo2 {
+ regulator-name = "va-ap-1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3 {
+ regulator-name = "vd-fuse";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4 {
+ regulator-name = "vd-ts-hv";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo5 {
+ regulator-name = "va-cam2-hv";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ ldo6 {
+ regulator-name = "va-sns-hv";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ ldo7 {
+ regulator-name = "va-cam1-hv";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ ldo8 {
+ regulator-name = "va-ap-rtc";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ ti,enable-ldo8-tracking;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9 {
+ regulator-name = "vi-sdcard";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ ldousb {
+ regulator-name = "avdd-usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln {
+ regulator-name = "va-hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&palmas>;
+ interrupts = <8 0>;
+ };
+
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ };
+
+ /* eMMC */
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ vmmc-supply = <&vdd_1v8>;
+ non-removable;
+ };
+
+ usb@7d000000 {
+ status = "okay";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ nvidia,xcvr-setup = <7>;
+ nvidia,xcvr-lsfslew = <2>;
+ nvidia,xcvr-lsrslew = <2>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ /* Should be changed to "otg" once we have vbus_supply */
+ /* As of now, USB devices need to be powered externally */
+ dr_mode = "host";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 1 40000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+
+ power-supply = <&lcd_bl_en>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ volume_down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ volume_up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* FIXME: output of BQ24192 */
+ vs_sys: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "VS_SYS";
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lcd_bl_en: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "VDD_LCD_BL";
+ regulator-min-microvolt = <16500000>;
+ regulator-max-microvolt = <16500000>;
+ gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vs_sys>;
+ regulator-boot-on;
+ };
+
+ vdd_lcd: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "VD_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_1v8>;
+ regulator-boot-on;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
new file mode 100644
index 0000000..e31fb61
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -0,0 +1,1827 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+ model = "NVIDIA Tegra124 Jetson TK1";
+ compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
+
+ aliases {
+ rtc0 = "/i2c@0,7000d000/pmic@40";
+ rtc1 = "/rtc@0,7000e000";
+ };
+
+ memory {
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+ host1x@0,50000000 {
+ hdmi@0,54280000 {
+ status = "okay";
+
+ hdmi-supply = <&vdd_5v0_hdmi>;
+ pll-supply = <&vdd_hdmi_pll>;
+ vdd-supply = <&vdd_3v3_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ pinmux: pinmux@0,70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ clk_32k_out_pa0 {
+ nvidia,pins = "clk_32k_out_pa0";
+ nvidia,function = "soc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ uart3_cts_n_pa1 {
+ nvidia,pins = "uart3_cts_n_pa1";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap2_fs_pa2 {
+ nvidia,pins = "dap2_fs_pa2";
+ nvidia,function = "i2s1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap2_sclk_pa3 {
+ nvidia,pins = "dap2_sclk_pa3";
+ nvidia,function = "i2s1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap2_din_pa4 {
+ nvidia,pins = "dap2_din_pa4";
+ nvidia,function = "i2s1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap2_dout_pa5 {
+ nvidia,pins = "dap2_dout_pa5";
+ nvidia,function = "i2s1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3_cmd_pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pb0 {
+ nvidia,pins = "pb0";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pb1 {
+ nvidia,pins = "pb1";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3_dat3_pb4 {
+ nvidia,pins = "sdmmc3_dat3_pb4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3_dat2_pb5 {
+ nvidia,pins = "sdmmc3_dat2_pb5";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3_dat1_pb6 {
+ nvidia,pins = "sdmmc3_dat1_pb6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3_dat0_pb7 {
+ nvidia,pins = "sdmmc3_dat0_pb7";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ uart3_rts_n_pc0 {
+ nvidia,pins = "uart3_rts_n_pc0";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart2_txd_pc2 {
+ nvidia,pins = "uart2_txd_pc2";
+ nvidia,function = "irda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart2_rxd_pc3 {
+ nvidia,pins = "uart2_rxd_pc3";
+ nvidia,function = "irda";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gen1_i2c_scl_pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ gen1_i2c_sda_pc5 {
+ nvidia,pins = "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ pc7 {
+ nvidia,pins = "pc7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pg0 {
+ nvidia,pins = "pg0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pg1 {
+ nvidia,pins = "pg1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pg2 {
+ nvidia,pins = "pg2";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pg3 {
+ nvidia,pins = "pg3";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pg4 {
+ nvidia,pins = "pg4";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pg5 {
+ nvidia,pins = "pg5";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pg6 {
+ nvidia,pins = "pg6";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pg7 {
+ nvidia,pins = "pg7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ph0 {
+ nvidia,pins = "ph0";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ph1 {
+ nvidia,pins = "ph1";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ph2 {
+ nvidia,pins = "ph2";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ph3 {
+ nvidia,pins = "ph3";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ph4 {
+ nvidia,pins = "ph4";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ph5 {
+ nvidia,pins = "ph5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ph6 {
+ nvidia,pins = "ph6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ph7 {
+ nvidia,pins = "ph7";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pi0 {
+ nvidia,pins = "pi0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pi1 {
+ nvidia,pins = "pi1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pi2 {
+ nvidia,pins = "pi2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pi3 {
+ nvidia,pins = "pi3";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pi4 {
+ nvidia,pins = "pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pi5 {
+ nvidia,pins = "pi5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pi6 {
+ nvidia,pins = "pi6";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pi7 {
+ nvidia,pins = "pi7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pj0 {
+ nvidia,pins = "pj0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pj2 {
+ nvidia,pins = "pj2";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ uart2_cts_n_pj5 {
+ nvidia,pins = "uart2_cts_n_pj5";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ uart2_rts_n_pj6 {
+ nvidia,pins = "uart2_rts_n_pj6";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pj7 {
+ nvidia,pins = "pj7";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pk0 {
+ nvidia,pins = "pk0";
+ nvidia,function = "soc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pk1 {
+ nvidia,pins = "pk1";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pk2 {
+ nvidia,pins = "pk2";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pk3 {
+ nvidia,pins = "pk3";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pk4 {
+ nvidia,pins = "pk4";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ spdif_out_pk5 {
+ nvidia,pins = "spdif_out_pk5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ spdif_in_pk6 {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pk7 {
+ nvidia,pins = "pk7";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap1_fs_pn0 {
+ nvidia,pins = "dap1_fs_pn0";
+ nvidia,function = "i2s0";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap1_din_pn1 {
+ nvidia,pins = "dap1_din_pn1";
+ nvidia,function = "i2s0";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap1_dout_pn2 {
+ nvidia,pins = "dap1_dout_pn2";
+ nvidia,function = "sata";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap1_sclk_pn3 {
+ nvidia,pins = "dap1_sclk_pn3";
+ nvidia,function = "i2s0";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ usb_vbus_en0_pn4 {
+ nvidia,pins = "usb_vbus_en0_pn4";
+ nvidia,function = "usb";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ usb_vbus_en1_pn5 {
+ nvidia,pins = "usb_vbus_en1_pn5";
+ nvidia,function = "usb";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ hdmi_int_pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+ };
+ ulpi_data7_po0 {
+ nvidia,pins = "ulpi_data7_po0";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi_data0_po1 {
+ nvidia,pins = "ulpi_data0_po1";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi_data1_po2 {
+ nvidia,pins = "ulpi_data1_po2";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi_data2_po3 {
+ nvidia,pins = "ulpi_data2_po3";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi_data3_po4 {
+ nvidia,pins = "ulpi_data3_po4";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi_data4_po5 {
+ nvidia,pins = "ulpi_data4_po5";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi_data5_po6 {
+ nvidia,pins = "ulpi_data5_po6";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ulpi_data6_po7 {
+ nvidia,pins = "ulpi_data6_po7";
+ nvidia,function = "ulpi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap3_fs_pp0 {
+ nvidia,pins = "dap3_fs_pp0";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap3_din_pp1 {
+ nvidia,pins = "dap3_din_pp1";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap3_dout_pp2 {
+ nvidia,pins = "dap3_dout_pp2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap3_sclk_pp3 {
+ nvidia,pins = "dap3_sclk_pp3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap4_fs_pp4 {
+ nvidia,pins = "dap4_fs_pp4";
+ nvidia,function = "i2s3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap4_din_pp5 {
+ nvidia,pins = "dap4_din_pp5";
+ nvidia,function = "i2s3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap4_dout_pp6 {
+ nvidia,pins = "dap4_dout_pp6";
+ nvidia,function = "i2s3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap4_sclk_pp7 {
+ nvidia,pins = "dap4_sclk_pp7";
+ nvidia,function = "i2s3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_col0_pq0 {
+ nvidia,pins = "kb_col0_pq0";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_col1_pq1 {
+ nvidia,pins = "kb_col1_pq1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_col2_pq2 {
+ nvidia,pins = "kb_col2_pq2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_col3_pq3 {
+ nvidia,pins = "kb_col3_pq3";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_col4_pq4 {
+ nvidia,pins = "kb_col4_pq4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_col5_pq5 {
+ nvidia,pins = "kb_col5_pq5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_col6_pq6 {
+ nvidia,pins = "kb_col6_pq6";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_col7_pq7 {
+ nvidia,pins = "kb_col7_pq7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row0_pr0 {
+ nvidia,pins = "kb_row0_pr0";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row1_pr1 {
+ nvidia,pins = "kb_row1_pr1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row2_pr2 {
+ nvidia,pins = "kb_row2_pr2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row3_pr3 {
+ nvidia,pins = "kb_row3_pr3";
+ nvidia,function = "sys";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row4_pr4 {
+ nvidia,pins = "kb_row4_pr4";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row5_pr5 {
+ nvidia,pins = "kb_row5_pr5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row6_pr6 {
+ nvidia,pins = "kb_row6_pr6";
+ nvidia,function = "displaya_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row7_pr7 {
+ nvidia,pins = "kb_row7_pr7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row8_ps0 {
+ nvidia,pins = "kb_row8_ps0";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row9_ps1 {
+ nvidia,pins = "kb_row9_ps1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row10_ps2 {
+ nvidia,pins = "kb_row10_ps2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row11_ps3 {
+ nvidia,pins = "kb_row11_ps3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row12_ps4 {
+ nvidia,pins = "kb_row12_ps4";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row13_ps5 {
+ nvidia,pins = "kb_row13_ps5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row14_ps6 {
+ nvidia,pins = "kb_row14_ps6";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row15_ps7 {
+ nvidia,pins = "kb_row15_ps7";
+ nvidia,function = "soc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row16_pt0 {
+ nvidia,pins = "kb_row16_pt0";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row17_pt1 {
+ nvidia,pins = "kb_row17_pt1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gen2_i2c_scl_pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5";
+ nvidia,function = "i2c2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ gen2_i2c_sda_pt6 {
+ nvidia,pins = "gen2_i2c_sda_pt6";
+ nvidia,function = "i2c2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_cmd_pt7 {
+ nvidia,pins = "sdmmc4_cmd_pt7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pu0 {
+ nvidia,pins = "pu0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pu1 {
+ nvidia,pins = "pu1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pu2 {
+ nvidia,pins = "pu2";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pu3 {
+ nvidia,pins = "pu3";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pu4 {
+ nvidia,pins = "pu4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pu5 {
+ nvidia,pins = "pu5";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pu6 {
+ nvidia,pins = "pu6";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pv0 {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pv1 {
+ nvidia,pins = "pv1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3_cd_n_pv2 {
+ nvidia,pins = "sdmmc3_cd_n_pv2";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1_wp_n_pv3 {
+ nvidia,pins = "sdmmc1_wp_n_pv3";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ddc_scl_pv4 {
+ nvidia,pins = "ddc_scl_pv4";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+ };
+ ddc_sda_pv5 {
+ nvidia,pins = "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+ };
+ gpio_w2_aud_pw2 {
+ nvidia,pins = "gpio_w2_aud_pw2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gpio_w3_aud_pw3 {
+ nvidia,pins = "gpio_w3_aud_pw3";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap_mclk1_pw4 {
+ nvidia,pins = "dap_mclk1_pw4";
+ nvidia,function = "extperiph1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ clk2_out_pw5 {
+ nvidia,pins = "clk2_out_pw5";
+ nvidia,function = "extperiph2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart3_txd_pw6 {
+ nvidia,pins = "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart3_rxd_pw7 {
+ nvidia,pins = "uart3_rxd_pw7";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dvfs_pwm_px0 {
+ nvidia,pins = "dvfs_pwm_px0";
+ nvidia,function = "cldvfs";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gpio_x1_aud_px1 {
+ nvidia,pins = "gpio_x1_aud_px1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dvfs_clk_px2 {
+ nvidia,pins = "dvfs_clk_px2";
+ nvidia,function = "cldvfs";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gpio_x3_aud_px3 {
+ nvidia,pins = "gpio_x3_aud_px3";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gpio_x4_aud_px4 {
+ nvidia,pins = "gpio_x4_aud_px4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gpio_x5_aud_px5 {
+ nvidia,pins = "gpio_x5_aud_px5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gpio_x6_aud_px6 {
+ nvidia,pins = "gpio_x6_aud_px6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gpio_x7_aud_px7 {
+ nvidia,pins = "gpio_x7_aud_px7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ulpi_clk_py0 {
+ nvidia,pins = "ulpi_clk_py0";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ulpi_dir_py1 {
+ nvidia,pins = "ulpi_dir_py1";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi_nxt_py2 {
+ nvidia,pins = "ulpi_nxt_py2";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ulpi_stp_py3 {
+ nvidia,pins = "ulpi_stp_py3";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc1_dat3_py4 {
+ nvidia,pins = "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1_dat2_py5 {
+ nvidia,pins = "sdmmc1_dat2_py5";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1_dat1_py6 {
+ nvidia,pins = "sdmmc1_dat1_py6";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1_dat0_py7 {
+ nvidia,pins = "sdmmc1_dat0_py7";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1_clk_pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1_cmd_pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pwr_i2c_scl_pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ pwr_i2c_sda_pz7 {
+ nvidia,pins = "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_dat1_paa1 {
+ nvidia,pins = "sdmmc4_dat1_paa1";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_dat2_paa2 {
+ nvidia,pins = "sdmmc4_dat2_paa2";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_dat3_paa3 {
+ nvidia,pins = "sdmmc4_dat3_paa3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_dat4_paa4 {
+ nvidia,pins = "sdmmc4_dat4_paa4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_dat5_paa5 {
+ nvidia,pins = "sdmmc4_dat5_paa5";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_dat6_paa6 {
+ nvidia,pins = "sdmmc4_dat6_paa6";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_dat7_paa7 {
+ nvidia,pins = "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb0 {
+ nvidia,pins = "pbb0";
+ nvidia,function = "vimclk2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ cam_i2c_scl_pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ cam_i2c_sda_pbb2 {
+ nvidia,pins = "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3";
+ nvidia,function = "vgp3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb4 {
+ nvidia,pins = "pbb4";
+ nvidia,function = "vgp4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb5 {
+ nvidia,pins = "pbb5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb6 {
+ nvidia,pins = "pbb6";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb7 {
+ nvidia,pins = "pbb7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ cam_mclk_pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pcc1 {
+ nvidia,pins = "pcc1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pcc2 {
+ nvidia,pins = "pcc2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk2_req_pcc5 {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ clk3_out_pee0 {
+ nvidia,pins = "clk3_out_pee0";
+ nvidia,function = "extperiph3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ clk3_req_pee1 {
+ nvidia,pins = "clk3_req_pee1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap_mclk1_req_pee2 {
+ nvidia,pins = "dap_mclk1_req_pee2";
+ nvidia,function = "sata";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ hdmi_cec_pee3 {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3_clk_lb_out_pee4 {
+ nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3_clk_lb_in_pee5 {
+ nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dp_hpd_pff0 {
+ nvidia,pins = "dp_hpd_pff0";
+ nvidia,function = "dp";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ usb_vbus_en2_pff1 {
+ nvidia,pins = "usb_vbus_en2_pff1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ pff2 {
+ nvidia,pins = "pff2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ core_pwr_req {
+ nvidia,pins = "core_pwr_req";
+ nvidia,function = "pwron";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ cpu_pwr_req {
+ nvidia,pins = "cpu_pwr_req";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pwr_int_n {
+ nvidia,pins = "pwr_int_n";
+ nvidia,function = "pmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ reset_out_n {
+ nvidia,pins = "reset_out_n";
+ nvidia,function = "reset_out_n";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+ };
+ clk_32k_in {
+ nvidia,pins = "clk_32k_in";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ jtag_rtck {
+ nvidia,pins = "jtag_rtck";
+ nvidia,function = "rtck";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ };
+
+ /* DB9 serial port */
+ serial@0,70006300 {
+ status = "okay";
+ };
+
+ /* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
+ i2c@0,7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ rt5639: audio-codec@1c {
+ compatible = "realtek,rt5639";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp451";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c02";
+ reg = <0x56>;
+ pagesize = <8>;
+ };
+ };
+
+ /* Expansion GEN2_I2C_* */
+ i2c@0,7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ /* Expansion CAM_I2C_* */
+ i2c@0,7000c500 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ /* HDMI DDC */
+ hdmi_ddc: i2c@0,7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ /* Expansion PWR_I2C_*, on-board components */
+ i2c@0,7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: pmic@40 {
+ compatible = "ams,as3722";
+ reg = <0x40>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ ams,system-power-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&as3722_default>;
+
+ as3722_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ gpio1_2_4_7 {
+ pins = "gpio1", "gpio2", "gpio4", "gpio7";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio3_5_6 {
+ pins = "gpio3", "gpio5", "gpio6";
+ bias-high-impedance;
+ };
+ };
+
+ regulators {
+ vsup-sd2-supply = <&vdd_5v0_sys>;
+ vsup-sd3-supply = <&vdd_5v0_sys>;
+ vsup-sd4-supply = <&vdd_5v0_sys>;
+ vsup-sd5-supply = <&vdd_5v0_sys>;
+ vin-ldo0-supply = <&vdd_1v35_lp0>;
+ vin-ldo1-6-supply = <&vdd_3v3_run>;
+ vin-ldo2-5-7-supply = <&vddio_1v8>;
+ vin-ldo3-4-supply = <&vdd_3v3_sys>;
+ vin-ldo9-10-supply = <&vdd_5v0_sys>;
+ vin-ldo11-supply = <&vdd_3v3_run>;
+
+ sd0 {
+ regulator-name = "+VDD_CPU_AP";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <3500000>;
+ regulator-max-microamp = <3500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ams,external-control = <2>;
+ };
+
+ sd1 {
+ regulator-name = "+VDD_CORE";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microamp = <2500000>;
+ regulator-max-microamp = <2500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ams,external-control = <1>;
+ };
+
+ vdd_1v35_lp0: sd2 {
+ regulator-name = "+1.35V_LP0(sd2)";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd3 {
+ regulator-name = "+1.35V_LP0(sd3)";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v05_run: sd4 {
+ regulator-name = "+1.05V_RUN";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vddio_1v8: sd5 {
+ regulator-name = "+1.8V_VDDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sd6 {
+ regulator-name = "+VDD_GPU_AP";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microamp = <3500000>;
+ regulator-max-microamp = <3500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0 {
+ regulator-name = "+1.05V_RUN_AVDD";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ams,external-control = <1>;
+ };
+
+ ldo1 {
+ regulator-name = "+1.8V_RUN_CAM";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2 {
+ regulator-name = "+1.2V_GEN_AVDD";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3 {
+ regulator-name = "+1.05V_LP0_VDD_RTC";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ams,enable-tracking;
+ };
+
+ ldo4 {
+ regulator-name = "+2.8V_RUN_CAM";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo5 {
+ regulator-name = "+1.2V_RUN_CAM_FRONT";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vddio_sdmmc3: ldo6 {
+ regulator-name = "+VDDIO_SDMMC3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7 {
+ regulator-name = "+1.05V_RUN_CAM_REAR";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo9 {
+ regulator-name = "+3.3V_RUN_TOUCH";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo10 {
+ regulator-name = "+2.8V_RUN_CAM_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo11 {
+ regulator-name = "+1.8V_RUN_VPP_FUSE";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
+ };
+
+ /* Expansion TS_SPI_* */
+ spi@0,7000d400 {
+ status = "okay";
+ };
+
+ /* Internal SPI */
+ spi@0,7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ spi-flash@0 {
+ compatible = "winbond,w25q32dw";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+ };
+
+ pmc@0,7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <500>;
+ nvidia,cpu-pwr-off-time = <300>;
+ nvidia,core-pwr-good-time = <641 3845>;
+ nvidia,core-pwr-off-time = <61036>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ /* SD card */
+ sdhci@0,700b0400 {
+ status = "okay";
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ vqmmc-supply = <&vddio_sdmmc3>;
+ };
+
+ /* eMMC */
+ sdhci@0,700b0600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
+ ahub@0,70300000 {
+ i2s@0,70301100 {
+ status = "okay";
+ };
+ };
+
+ /* mini-PCIe USB */
+ usb@0,7d004000 {
+ status = "okay";
+ };
+
+ usb-phy@0,7d004000 {
+ status = "okay";
+ };
+
+ /* USB A connector */
+ usb@0,7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@0,7d008000 {
+ status = "okay";
+ vbus-supply = <&vdd_usb3_vbus>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_mux: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "+VDD_MUX";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_5v0_sys: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "+5V_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
+
+ vdd_3v3_sys: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "+3.3V_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_mux>;
+ };
+
+ vdd_3v3_run: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "+3.3V_RUN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_3v3_hdmi: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vdd_3v3_run>;
+ };
+
+ vdd_usb1_vbus: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "+USB0_VBUS_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_usb3_vbus: regulator@8 {
+ compatible = "regulator-fixed";
+ reg = <8>;
+ regulator-name = "+5V_USB_HS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_3v3_lp0: regulator@10 {
+ compatible = "regulator-fixed";
+ reg = <10>;
+ regulator-name = "+3.3V_LP0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_hdmi_pll: regulator@11 {
+ compatible = "regulator-fixed";
+ reg = <11>;
+ regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_1v05_run>;
+ };
+
+ vdd_5v0_hdmi: regulator@12 {
+ compatible = "regulator-fixed";
+ reg = <12>;
+ regulator-name = "+5V_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-rt5640-jetson-tk1",
+ "nvidia,tegra-audio-rt5640";
+ nvidia,model = "NVIDIA Tegra Jetson TK1";
+
+ nvidia,audio-routing =
+ "Headphones", "HPOR",
+ "Headphones", "HPOL",
+ "Mic Jack", "MICBIAS1",
+ "IN2P", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&rt5639>;
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+
+ clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+ <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA124_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
+};
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index c17283c..f0bb842 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -17,6 +17,18 @@
};
host1x@0,50000000 {
+ hdmi@0,54280000 {
+ status = "okay";
+
+ vdd-supply = <&vdd_3v3_hdmi>;
+ pll-supply = <&vdd_hdmi_pll>;
+ hdmi-supply = <&vdd_5v0_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ };
+
sor@0,54540000 {
status = "okay";
@@ -601,7 +613,7 @@
clock-frequency = <100000>;
};
- i2c@0,7000c700 {
+ hdmi_ddc: i2c@0,7000c700 {
status = "okay";
clock-frequency = <100000>;
};
@@ -700,7 +712,7 @@
regulator-boot-on;
};
- sd4 {
+ vdd_1v05_run: sd4 {
regulator-name = "+1.05V_RUN";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
@@ -931,9 +943,10 @@
sdhci@0,700b0400 {
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
status = "okay";
bus-width = <4>;
- vmmc-supply = <&vddio_sdmmc3>;
+ vqmmc-supply = <&vddio_sdmmc3>;
};
sdhci@0,700b0600 {
@@ -1060,6 +1073,8 @@
regulator-name = "+3.3V_RUN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
@@ -1145,6 +1160,27 @@
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
+
+ vdd_hdmi_pll: regulator@11 {
+ compatible = "regulator-fixed";
+ reg = <11>;
+ regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ vin-supply = <&vdd_1v05_run>;
+ };
+
+ vdd_5v0_hdmi: regulator@12 {
+ compatible = "regulator-fixed";
+ reg = <12>;
+ regulator-name = "+5V_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 6d540a0..6e6bc4e 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -51,6 +51,18 @@
nvidia,head = <1>;
};
+ hdmi@0,54280000 {
+ compatible = "nvidia,tegra124-hdmi";
+ reg = <0x0 0x54280000 0x0 0x00040000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+ <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+ clock-names = "hdmi", "parent";
+ resets = <&tegra_car 51>;
+ reset-names = "hdmi";
+ status = "disabled";
+ };
+
sor@0,54540000 {
compatible = "nvidia,tegra124-sor";
reg = <0x0 0x54540000 0x0 0x00040000>;
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 3fb1f50..f45aad6 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -28,6 +28,7 @@
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <&vdd_5v0_hdmi>;
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
@@ -724,6 +725,17 @@
gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ vdd_5v0_hdmi: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "VDDIO_HDMI";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_reg>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index e93fe45b..3189791 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -40,6 +40,7 @@
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <&vdd_5v0_hdmi>;
vdd-supply = <&sys_3v3_reg>;
pll-supply = <&vio_reg>;
@@ -478,6 +479,17 @@
gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
+
+ vdd_5v0_hdmi: regulator@8 {
+ compatible = "regulator-fixed";
+ reg = <8>;
+ regulator-name = "+VDD_5V_HDMI";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&sys_3v3_reg>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
new file mode 100644
index 0000000..7793abd
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -0,0 +1,205 @@
+/dts-v1/;
+
+#include "tegra30-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri T30 on Colibri Evaluation Board";
+ compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
+
+ aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/tps65911@2d";
+ rtc2 = "/rtc@7000e000";
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+ hdmi@54280000 {
+ status = "okay";
+ };
+ };
+
+ serial@70006000 {
+ status = "okay";
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "stm,m41t00";
+ reg = <0x68>;
+ };
+ };
+
+ /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+ hdmiddc: i2c@7000c700 {
+ status = "okay";
+ };
+
+ /* SPI1: Colibri SSP */
+ spi@7000d400 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ can0: can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+ spidev0: spi@1 {
+ compatible = "spidev";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+ };
+ };
+
+ sdhci@78000200 {
+ status = "okay";
+ bus-width = <4>;
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ };
+
+ /* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+ usb@7d000000 {
+ status = "okay";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ vbus-supply = <&usbc_vbus_reg>;
+ };
+
+ /* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ vbus-supply = <&usbh_vbus_reg>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ /* PWM<A> */
+ pwms = <&pwm 0 5000000>;
+ brightness-levels = <255 128 64 32 16 8 4 0>;
+ default-brightness-level = <6>;
+ /* BL_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ clocks {
+ clk16m: clk@1 {
+ compatible = "fixed-clock";
+ reg=<1>;
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ clock-output-names = "clk16m";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+
+ backlight = <&backlight>;
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ pwmb {
+ label = "PWM<B>";
+ pwms = <&pwm 1 19600>;
+ max-brightness = <255>;
+ };
+ pwmc {
+ label = "PWM<C>";
+ pwms = <&pwm 2 19600>;
+ max-brightness = <255>;
+ };
+ pwmd {
+ label = "PWM<D>";
+ pwms = <&pwm 3 19600>;
+ max-brightness = <255>;
+ };
+ };
+
+ regulators {
+ sys_5v0_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ usbc_vbus_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usbc_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&sys_5v0_reg>;
+ };
+
+ /* USBH_PEN */
+ usbh_vbus_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usbh_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <&sys_5v0_reg>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
new file mode 100644
index 0000000..bf16f8e
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -0,0 +1,377 @@
+#include <dt-bindings/input/input.h>
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Colibri T30 Device Tree
+ * Compatible for Revisions 1.1B/1.1C/1.1D
+ */
+/ {
+ model = "Toradex Colibri T30";
+ compatible = "toradex,colibri_t30", "nvidia,tegra30";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ host1x@50000000 {
+ hdmi@54280000 {
+ vdd-supply = <&sys_3v3_reg>;
+ pll-supply = <&vio_reg>;
+
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,ddc-i2c-bus = <&hdmiddc>;
+ };
+ };
+
+ pinmux@70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ /* Colibri BL_ON */
+ pv2 {
+ nvidia,pins = "pv2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri Backlight PWM<A> */
+ sdmmc3_dat3_pb4 {
+ nvidia,pins = "sdmmc3_dat3_pb4";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri CAN_INT */
+ kb_row8_ps0 {
+ nvidia,pins = "kb_row8_ps0";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+ * todays display need DE, disable LCD_M1
+ */
+ lcd_m1_pw1 {
+ nvidia,pins = "lcd_m1_pw1";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Thermal alert, need to be disabled */
+ lcd_dc1_pd2 {
+ nvidia,pins = "lcd_dc1_pd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri MMC */
+ kb_row10_ps2 {
+ nvidia,pins = "kb_row10_ps2";
+ nvidia,function = "sdmmc2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row11_ps3 {
+ nvidia,pins = "kb_row11_ps3",
+ "kb_row12_ps4",
+ "kb_row13_ps5",
+ "kb_row14_ps6",
+ "kb_row15_ps7";
+ nvidia,function = "sdmmc2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri SSP */
+ ulpi_clk_py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3_dat6_pd3 {
+ nvidia,pins = "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
+ nvidia,function = "spdif";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri UART_A */
+ ulpi_data0 {
+ nvidia,pins = "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri UART_B */
+ gmi_a16_pj7 {
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri UART_C */
+ uart2_rxd {
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_txd_pc2";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* eMMC */
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ };
+
+ hdmiddc: i2c@7000c700 {
+ clock-frequency = <100000>;
+ };
+
+ /*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic: tps65911@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&sys_3v3_reg>;
+ vcc2-supply = <&sys_3v3_reg>;
+ vcc3-supply = <&vio_reg>;
+ vcc4-supply = <&sys_3v3_reg>;
+ vcc5-supply = <&sys_3v3_reg>;
+ vcc6-supply = <&vio_reg>;
+ vcc7-supply = <&sys_5v0_reg>;
+ vccio-supply = <&sys_3v3_reg>;
+
+ regulators {
+ /* SW1: +V1.35_VDDIO_DDR */
+ vdd1_reg: vdd1 {
+ regulator-name = "vddio_ddr_1v35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ /* SW2: unused */
+
+ /* SW CTRL: +V1.0_VDD_CPU */
+ vddctrl_reg: vddctrl {
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ };
+
+ /* SWIO: +V1.8 */
+ vio_reg: vio {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /* LDO1: unused */
+
+ /*
+ * EN_+V3.3 switching via FET:
+ * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+ * see also v3_3 fixed supply
+ */
+ ldo2_reg: ldo2 {
+ regulator-name = "en_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* LDO3: unused */
+
+ /* +V1.2_VDD_RTC */
+ ldo4_reg: ldo4 {
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V2.8_AVDD_VDAC:
+ * only required for analog RGB
+ */
+ ldo5_reg: ldo5 {
+ regulator-name = "avdd_vdac";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+ * but LDO6 can't set voltage in 50mV
+ * granularity
+ */
+ ldo6_reg: ldo6 {
+ regulator-name = "avdd_plle";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ /* +V1.2_AVDD_PLL */
+ ldo7_reg: ldo7 {
+ regulator-name = "avdd_pll";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /* +V1.0_VDD_DDR_HS */
+ ldo8_reg: ldo8 {
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ /*
+ * LM95245 temperature sensor
+ * Note: OVERT_N directly connected to PMIC PWRDN
+ */
+ temp-sensor@4c {
+ compatible = "national,lm95245";
+ reg = <0x4c>;
+ };
+
+ /* SW: +V1.2_VDD_CORE */
+ tps62362@60 {
+ compatible = "ti,tps62362";
+ reg = <0x60>;
+
+ regulator-name = "tps62362-vout";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-low;
+ /* VSEL1: EN_CORE_DVFS_N low for DVFS */
+ ti,vsel1-state-low;
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ emmc: sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ /* EHCI instance 1: USB2_DP/N -> AX88772B */
+ usb@7d004000 {
+ status = "okay";
+ };
+
+ usb-phy@7d004000 {
+ status = "okay";
+ nvidia,is-wired = <1>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clk@0 {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_3v3_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts
new file mode 100644
index 0000000..aecc7db
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-colibri.dts
@@ -0,0 +1,123 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "Toradex Colibri VF61 COM";
+ compatible = "toradex,vf610-colibri", "fsl,vf610";
+
+ chosen {
+ bootargs = "console=ttyLP0,115200";
+ };
+
+ memory {
+ reg = <0x80000000 0x10000000>;
+ };
+
+ clocks {
+ enet_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+};
+
+&L2 {
+ arm,data-latency = <2 1 2>;
+ arm,tag-latency = <3 2 3>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB20__GPIO_42 0x219d
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD2__UART2_RTS 0x21a2
+ VF610_PAD_PTD3__UART2_CTS 0x21a1
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index ded3610..11d7334 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -113,6 +113,13 @@
};
};
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
&fec0 {
phy-mode = "rmii";
pinctrl-names = "default";
@@ -160,6 +167,18 @@
>;
};
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTA7__GPIO_134 0x219d
+ >;
+ };
+
pinctrl_fec0: fec0grp {
fsl,pins = <
VF610_PAD_PTA6__RMII_CLKIN 0x30d1
@@ -196,6 +215,17 @@
>;
};
+ pinctrl_pwm0: pwm0grp {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x1582
+ VF610_PAD_PTB1__FTM0_CH1 0x1582
+ VF610_PAD_PTB2__FTM0_CH2 0x1582
+ VF610_PAD_PTB3__FTM0_CH3 0x1582
+ VF610_PAD_PTB6__FTM0_CH6 0x1582
+ VF610_PAD_PTB7__FTM0_CH7 0x1582
+ >;
+ };
+
pinctrl_sai2: sai2grp {
fsl,pins = <
VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
@@ -217,6 +247,12 @@
};
};
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0>;
+ status = "okay";
+};
+
&sai2 {
#sound-dai-cells = <0>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index b8ce0aa7..73355dd 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -183,6 +183,19 @@
clock-names = "pit";
};
+ pwm0: pwm@40038000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x40038000 0x1000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks VF610_CLK_FTM0>,
+ <&clks VF610_CLK_FTM0_EXT_SEL>,
+ <&clks VF610_CLK_FTM0_FIX_SEL>,
+ <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+ status = "disabled";
+ };
+
adc0: adc@4003b000 {
compatible = "fsl,vf610-adc";
reg = <0x4003b000 0x1000>;
@@ -347,6 +360,17 @@
status = "disabled";
};
+ esdhc1: esdhc@400b2000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x400b2000 0x4000>;
+ interrupts = <0 28 0x04>;
+ clocks = <&clks VF610_CLK_IPG_BUS>,
+ <&clks VF610_CLK_PLATFORM_BUS>,
+ <&clks VF610_CLK_ESDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 4ce7b70..e07a227 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -65,6 +65,7 @@
CONFIG_I2C=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_S3C2410=y
CONFIG_DEBUG_GPIO=y
# CONFIG_HWMON is not set
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 9ef3f83..963c51f 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -18,6 +18,7 @@
void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
struct map_desc;
+extern void __iomem *sysram_ns_base_addr;
void exynos_init_io(void);
void exynos_restart(enum reboot_mode mode, const char *cmd);
void exynos_cpuidle_init(void);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index b32a907..e973ff5 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -114,51 +114,6 @@
},
};
-static struct map_desc exynos4_iodesc0[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4210_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM_NS,
- .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4x12_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM_NS,
- .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos5250_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM_NS,
- .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
static struct map_desc exynos5_iodesc[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_SYS,
@@ -181,11 +136,6 @@
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
.length = 144 * SZ_1K,
@@ -280,20 +230,6 @@
if (soc_is_exynos5())
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
-
- if (soc_is_exynos4210()) {
- if (samsung_rev() == EXYNOS4210_REV_0)
- iotable_init(exynos4_iodesc0,
- ARRAY_SIZE(exynos4_iodesc0));
- else
- iotable_init(exynos4_iodesc1,
- ARRAY_SIZE(exynos4_iodesc1));
- iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc));
- }
- if (soc_is_exynos4212() || soc_is_exynos4412())
- iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc));
- if (soc_is_exynos5250())
- iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
}
void __init exynos_init_io(void)
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 932129e..4135edb 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -18,6 +18,9 @@
#include <mach/map.h>
+#include <plat/cpu.h>
+
+#include "common.h"
#include "smc.h"
static int exynos_do_idle(void)
@@ -28,13 +31,29 @@
static int exynos_cpu_boot(int cpu)
{
+ /*
+ * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+ * But, Exynos4212 has only one secondary CPU so second parameter
+ * isn't used for informing secure firmware about CPU id.
+ */
+ if (soc_is_exynos4212())
+ cpu = 0;
+
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
return 0;
}
static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
{
- void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
+ void __iomem *boot_reg;
+
+ if (!sysram_ns_base_addr)
+ return -ENODEV;
+
+ boot_reg = sysram_ns_base_addr + 0x1c;
+
+ if (!soc_is_exynos4212())
+ boot_reg += 4*cpu;
__raw_writel(boot_addr, boot_reg);
return 0;
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 7b046b5..548269a 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -23,13 +23,6 @@
#include <plat/map-s5p.h>
-#define EXYNOS4_PA_SYSRAM0 0x02025000
-#define EXYNOS4_PA_SYSRAM1 0x02020000
-#define EXYNOS5_PA_SYSRAM 0x02020000
-#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000
-#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000
-#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000
-
#define EXYNOS_PA_CHIPID 0x10000000
#define EXYNOS4_PA_SYSCON 0x10010000
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 03e5e9f..c11c541 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -20,6 +20,7 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
@@ -33,11 +34,33 @@
extern void exynos4_secondary_startup(void);
+static void __iomem *sysram_base_addr;
+void __iomem *sysram_ns_base_addr;
+
+static void __init exynos_smp_prepare_sysram(void)
+{
+ struct device_node *node;
+
+ for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+ if (!of_device_is_available(node))
+ continue;
+ sysram_base_addr = of_iomap(node, 0);
+ break;
+ }
+
+ for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
+ if (!of_device_is_available(node))
+ continue;
+ sysram_ns_base_addr = of_iomap(node, 0);
+ break;
+ }
+}
+
static inline void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
return S5P_INFORM5;
- return S5P_VA_SYSRAM;
+ return sysram_base_addr;
}
static inline void __iomem *cpu_boot_reg(int cpu)
@@ -45,6 +68,8 @@
void __iomem *boot_reg;
boot_reg = cpu_boot_reg_base();
+ if (!boot_reg)
+ return ERR_PTR(-ENODEV);
if (soc_is_exynos4412())
boot_reg += 4*cpu;
else if (soc_is_exynos5420())
@@ -90,6 +115,7 @@
{
unsigned long timeout;
unsigned long phys_cpu = cpu_logical_map(cpu);
+ int ret = -ENOSYS;
/*
* Set synchronisation state between this boot processor
@@ -146,8 +172,18 @@
* Try to set boot address using firmware first
* and fall back to boot register if it fails.
*/
- if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
+ ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+ if (ret && ret != -ENOSYS)
+ goto fail;
+ if (ret == -ENOSYS) {
+ void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+
+ if (IS_ERR(boot_reg)) {
+ ret = PTR_ERR(boot_reg);
+ goto fail;
+ }
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+ }
call_firmware_op(cpu_boot, phys_cpu);
@@ -163,9 +199,10 @@
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
+fail:
spin_unlock(&boot_lock);
- return pen_release != -1 ? -ENOSYS : 0;
+ return pen_release != -1 ? ret : 0;
}
/*
@@ -205,6 +242,8 @@
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
scu_enable(scu_base_addr());
+ exynos_smp_prepare_sysram();
+
/*
* Write the address of secondary startup into the
* system-wide flags register. The boot monitor waits
@@ -217,12 +256,21 @@
for (i = 1; i < max_cpus; ++i) {
unsigned long phys_cpu;
unsigned long boot_addr;
+ int ret;
phys_cpu = cpu_logical_map(i);
boot_addr = virt_to_phys(exynos4_secondary_startup);
- if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
+ ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+ if (ret && ret != -ENOSYS)
+ break;
+ if (ret == -ENOSYS) {
+ void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+
+ if (IS_ERR(boot_reg))
+ break;
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+ }
}
}
diff --git a/drivers/reset/sti/reset-stih415.c b/drivers/reset/sti/reset-stih415.c
index e6f6c41..c93fd26 100644
--- a/drivers/reset/sti/reset-stih415.c
+++ b/drivers/reset/sti/reset-stih415.c
@@ -73,6 +73,7 @@
[STIH415_USB0_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 9),
[STIH415_USB1_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 10),
[STIH415_USB2_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 11),
+ [STIH415_KEYSCAN_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 8),
};
static struct syscfg_reset_controller_data stih415_powerdown_controller = {
diff --git a/drivers/reset/sti/reset-stih416.c b/drivers/reset/sti/reset-stih416.c
index fe3bf02..5fc9870 100644
--- a/drivers/reset/sti/reset-stih416.c
+++ b/drivers/reset/sti/reset-stih416.c
@@ -104,6 +104,7 @@
[STIH416_COMPO_A_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 4),
[STIH416_VP8_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 10),
[STIH416_VTG_MAIN_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 16),
+ [STIH416_KEYSCAN_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 8),
};
static struct syscfg_reset_controller_data stih416_powerdown_controller = {
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index 6548a5f..4d3e935 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -50,6 +50,7 @@
#define R8A7790_CLK_SYS_DMAC0 19
/* MSTP3 */
+#define R8A7790_CLK_IIC2 0
#define R8A7790_CLK_TPU0 4
#define R8A7790_CLK_MMCIF1 5
#define R8A7790_CLK_SDHI3 11
@@ -57,6 +58,8 @@
#define R8A7790_CLK_SDHI1 13
#define R8A7790_CLK_SDHI0 14
#define R8A7790_CLK_MMCIF0 15
+#define R8A7790_CLK_IIC0 18
+#define R8A7790_CLK_IIC1 23
#define R8A7790_CLK_SSUSB 28
#define R8A7790_CLK_CMT1 29
#define R8A7790_CLK_USBDMAC0 30
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index 30f82f2..6023543 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -51,6 +51,8 @@
#define R8A7791_CLK_SDHI1 12
#define R8A7791_CLK_SDHI0 14
#define R8A7791_CLK_MMCIF0 15
+#define R8A7791_CLK_IIC0 18
+#define R8A7791_CLK_IIC1 23
#define R8A7791_CLK_SSUSB 28
#define R8A7791_CLK_CMT1 29
#define R8A7791_CLK_USBDMAC0 30
@@ -61,6 +63,7 @@
#define R8A7791_CLK_PWM 23
/* MSTP7 */
+#define R8A7791_CLK_EHCI 3
#define R8A7791_CLK_HSUSB 4
#define R8A7791_CLK_HSCIF2 13
#define R8A7791_CLK_SCIF5 14
diff --git a/include/dt-bindings/clock/stih415-clks.h b/include/dt-bindings/clock/stih415-clks.h
new file mode 100644
index 0000000..0d2c739
--- /dev/null
+++ b/include/dt-bindings/clock/stih415-clks.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH415 SoC.
+ */
+#ifndef _CLK_STIH415
+#define _CLK_STIH415
+
+/* CLOCKGEN A0 */
+#define CLK_ICN_REG 0
+#define CLK_ETH1_PHY 4
+
+/* CLOCKGEN A1 */
+#define CLK_GMAC0_PHY 3
+
+#endif
diff --git a/include/dt-bindings/clock/stih416-clks.h b/include/dt-bindings/clock/stih416-clks.h
new file mode 100644
index 0000000..552c779
--- /dev/null
+++ b/include/dt-bindings/clock/stih416-clks.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH416 SoC.
+ */
+#ifndef _CLK_STIH416
+#define _CLK_STIH416
+
+/* CLOCKGEN A0 */
+#define CLK_ICN_REG 0
+#define CLK_ETH1_PHY 4
+
+/* CLOCKGEN A1 */
+#define CLK_GMAC0_PHY 3
+
+#endif
diff --git a/include/dt-bindings/reset-controller/stih415-resets.h b/include/dt-bindings/reset-controller/stih415-resets.h
index c2f8a66..c2329fe 100644
--- a/include/dt-bindings/reset-controller/stih415-resets.h
+++ b/include/dt-bindings/reset-controller/stih415-resets.h
@@ -22,5 +22,6 @@
#define STIH415_USB0_SOFTRESET 3
#define STIH415_USB1_SOFTRESET 4
#define STIH415_USB2_SOFTRESET 5
+#define STIH415_KEYSCAN_SOFTRESET 6
#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */
diff --git a/include/dt-bindings/reset-controller/stih416-resets.h b/include/dt-bindings/reset-controller/stih416-resets.h
index 2127743..fcf9af1 100644
--- a/include/dt-bindings/reset-controller/stih416-resets.h
+++ b/include/dt-bindings/reset-controller/stih416-resets.h
@@ -46,5 +46,6 @@
#define STIH416_COMPO_A_SOFTRESET 25
#define STIH416_VP8_DEC_SOFTRESET 26
#define STIH416_VTG_MAIN_SOFTRESET 27
+#define STIH416_KEYSCAN_SOFTRESET 28
#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH416 */
diff --git a/include/dt-bindings/reset/altr,rst-mgr.h b/include/dt-bindings/reset/altr,rst-mgr.h
new file mode 100644
index 0000000..3f04908
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+
+/* MPUMODRST */
+#define CPU0_RESET 0
+#define CPU1_RESET 1
+#define WDS_RESET 2
+#define SCUPER_RESET 3
+#define L2_RESET 4
+
+/* PERMODRST */
+#define EMAC0_RESET 32
+#define EMAC1_RESET 33
+#define USB0_RESET 34
+#define USB1_RESET 35
+#define NAND_RESET 36
+#define QSPI_RESET 37
+#define L4WD0_RESET 38
+#define L4WD1_RESET 39
+#define OSC1TIMER0_RESET 40
+#define OSC1TIMER1_RESET 41
+#define SPTIMER0_RESET 42
+#define SPTIMER1_RESET 43
+#define I2C0_RESET 44
+#define I2C1_RESET 45
+#define I2C2_RESET 46
+#define I2C3_RESET 47
+#define UART0_RESET 48
+#define UART1_RESET 49
+#define SPIM0_RESET 50
+#define SPIM1_RESET 51
+#define SPIS0_RESET 52
+#define SPIS1_RESET 53
+#define SDMMC_RESET 54
+#define CAN0_RESET 55
+#define CAN1_RESET 56
+#define GPIO0_RESET 57
+#define GPIO1_RESET 58
+#define GPIO2_RESET 59
+#define DMA_RESET 60
+#define SDR_RESET 61
+
+/* PER2MODRST */
+#define DMAIF0_RESET 64
+#define DMAIF1_RESET 65
+#define DMAIF2_RESET 66
+#define DMAIF3_RESET 67
+#define DMAIF4_RESET 68
+#define DMAIF5_RESET 69
+#define DMAIF6_RESET 70
+#define DMAIF7_RESET 71
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET 96
+#define LWHPS2FPGA_RESET 97
+#define FPGA2HPS_RESET 98
+
+/* MISCMODRST*/
+#define ROM_RESET 128
+#define OCRAM_RESET 129
+#define SYSMGR_RESET 130
+#define SYSMGRCOLD_RESET 131
+#define FPGAMGR_RESET 132
+#define ACPIDMAP_RESET 133
+#define S2F_RESET 134
+#define S2FCOLD_RESET 135
+#define NRSTPIN_RESET 136
+#define TIMESTAMPCOLD_RESET 137
+#define CLKMGRCOLD_RESET 138
+#define SCANMGR_RESET 139
+#define FRZCTRLCOLD_RESET 140
+#define SYSDBG_RESET 141
+#define DBG_RESET 142
+#define TAPCOLD_RESET 143
+#define SDRCOLD_RESET 144
+
+#endif