| /* |
| * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * EXYNOS - Power Management support |
| * |
| * Based on arch/arm/mach-s3c2410/pm.c |
| * Copyright (c) 2006 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/suspend.h> |
| #include <linux/cpu_pm.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/soc/samsung/exynos-regs-pmu.h> |
| #include <linux/soc/samsung/exynos-pmu.h> |
| |
| #include <asm/firmware.h> |
| #include <asm/smp_scu.h> |
| #include <asm/suspend.h> |
| #include <asm/cacheflush.h> |
| |
| #include <mach/map.h> |
| |
| #include "common.h" |
| |
| static inline void __iomem *exynos_boot_vector_addr(void) |
| { |
| if (samsung_rev() == EXYNOS4210_REV_1_1) |
| return pmu_base_addr + S5P_INFORM7; |
| else if (samsung_rev() == EXYNOS4210_REV_1_0) |
| return sysram_base_addr + 0x24; |
| return pmu_base_addr + S5P_INFORM0; |
| } |
| |
| static inline void __iomem *exynos_boot_vector_flag(void) |
| { |
| if (samsung_rev() == EXYNOS4210_REV_1_1) |
| return pmu_base_addr + S5P_INFORM6; |
| else if (samsung_rev() == EXYNOS4210_REV_1_0) |
| return sysram_base_addr + 0x20; |
| return pmu_base_addr + S5P_INFORM1; |
| } |
| |
| #define S5P_CHECK_AFTR 0xFCBA0D10 |
| |
| /* For Cortex-A9 Diagnostic and Power control register */ |
| static unsigned int save_arm_register[2]; |
| |
| void exynos_cpu_save_register(void) |
| { |
| unsigned long tmp; |
| |
| /* Save Power control register */ |
| asm ("mrc p15, 0, %0, c15, c0, 0" |
| : "=r" (tmp) : : "cc"); |
| |
| save_arm_register[0] = tmp; |
| |
| /* Save Diagnostic register */ |
| asm ("mrc p15, 0, %0, c15, c0, 1" |
| : "=r" (tmp) : : "cc"); |
| |
| save_arm_register[1] = tmp; |
| } |
| |
| void exynos_cpu_restore_register(void) |
| { |
| unsigned long tmp; |
| |
| /* Restore Power control register */ |
| tmp = save_arm_register[0]; |
| |
| asm volatile ("mcr p15, 0, %0, c15, c0, 0" |
| : : "r" (tmp) |
| : "cc"); |
| |
| /* Restore Diagnostic register */ |
| tmp = save_arm_register[1]; |
| |
| asm volatile ("mcr p15, 0, %0, c15, c0, 1" |
| : : "r" (tmp) |
| : "cc"); |
| } |
| |
| void exynos_pm_central_suspend(void) |
| { |
| unsigned long tmp; |
| |
| /* Setting Central Sequence Register for power down mode */ |
| tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); |
| tmp &= ~S5P_CENTRAL_LOWPWR_CFG; |
| pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); |
| } |
| |
| int exynos_pm_central_resume(void) |
| { |
| unsigned long tmp; |
| |
| /* |
| * If PMU failed while entering sleep mode, WFI will be |
| * ignored by PMU and then exiting cpu_do_idle(). |
| * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically |
| * in this situation. |
| */ |
| tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); |
| if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { |
| tmp |= S5P_CENTRAL_LOWPWR_CFG; |
| pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); |
| /* clear the wakeup state register */ |
| pmu_raw_writel(0x0, S5P_WAKEUP_STAT); |
| /* No need to perform below restore code */ |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ |
| static void exynos_set_wakeupmask(long mask) |
| { |
| pmu_raw_writel(mask, S5P_WAKEUP_MASK); |
| if (soc_is_exynos3250()) |
| pmu_raw_writel(0x0, S5P_WAKEUP_MASK2); |
| } |
| |
| static void exynos_cpu_set_boot_vector(long flags) |
| { |
| writel_relaxed(virt_to_phys(exynos_cpu_resume), |
| exynos_boot_vector_addr()); |
| writel_relaxed(flags, exynos_boot_vector_flag()); |
| } |
| |
| static int exynos_aftr_finisher(unsigned long flags) |
| { |
| int ret; |
| |
| exynos_set_wakeupmask(soc_is_exynos3250() ? 0x40003ffe : 0x0000ff3e); |
| /* Set value of power down register for aftr mode */ |
| exynos_sys_powerdown_conf(SYS_AFTR); |
| |
| ret = call_firmware_op(do_idle, FW_DO_IDLE_AFTR); |
| if (ret == -ENOSYS) { |
| if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) |
| exynos_cpu_save_register(); |
| exynos_cpu_set_boot_vector(S5P_CHECK_AFTR); |
| cpu_do_idle(); |
| } |
| |
| return 1; |
| } |
| |
| void exynos_enter_aftr(void) |
| { |
| unsigned int cpuid = smp_processor_id(); |
| |
| cpu_pm_enter(); |
| |
| if (soc_is_exynos3250()) |
| exynos_set_boot_flag(cpuid, C2_STATE); |
| |
| exynos_pm_central_suspend(); |
| |
| if (of_machine_is_compatible("samsung,exynos4212") || |
| of_machine_is_compatible("samsung,exynos4412")) { |
| /* Setting SEQ_OPTION register */ |
| pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0, |
| S5P_CENTRAL_SEQ_OPTION); |
| } |
| |
| cpu_suspend(0, exynos_aftr_finisher); |
| |
| if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { |
| scu_enable(S5P_VA_SCU); |
| if (call_firmware_op(resume) == -ENOSYS) |
| exynos_cpu_restore_register(); |
| } |
| |
| exynos_pm_central_resume(); |
| |
| if (soc_is_exynos3250()) |
| exynos_clear_boot_flag(cpuid, C2_STATE); |
| |
| cpu_pm_exit(); |
| } |
| |
| #if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE) |
| static atomic_t cpu1_wakeup = ATOMIC_INIT(0); |
| |
| static int exynos_cpu0_enter_aftr(void) |
| { |
| int ret = -1; |
| |
| /* |
| * If the other cpu is powered on, we have to power it off, because |
| * the AFTR state won't work otherwise |
| */ |
| if (cpu_online(1)) { |
| /* |
| * We reach a sync point with the coupled idle state, we know |
| * the other cpu will power down itself or will abort the |
| * sequence, let's wait for one of these to happen |
| */ |
| while (exynos_cpu_power_state(1)) { |
| unsigned long boot_addr; |
| |
| /* |
| * The other cpu may skip idle and boot back |
| * up again |
| */ |
| if (atomic_read(&cpu1_wakeup)) |
| goto abort; |
| |
| /* |
| * The other cpu may bounce through idle and |
| * boot back up again, getting stuck in the |
| * boot rom code |
| */ |
| ret = exynos_get_boot_addr(1, &boot_addr); |
| if (ret) |
| goto fail; |
| ret = -1; |
| if (boot_addr == 0) |
| goto abort; |
| |
| cpu_relax(); |
| } |
| } |
| |
| exynos_enter_aftr(); |
| ret = 0; |
| |
| abort: |
| if (cpu_online(1)) { |
| unsigned long boot_addr = virt_to_phys(exynos_cpu_resume); |
| |
| /* |
| * Set the boot vector to something non-zero |
| */ |
| ret = exynos_set_boot_addr(1, boot_addr); |
| if (ret) |
| goto fail; |
| dsb(); |
| |
| /* |
| * Turn on cpu1 and wait for it to be on |
| */ |
| exynos_cpu_power_up(1); |
| while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN) |
| cpu_relax(); |
| |
| if (soc_is_exynos3250()) { |
| while (!pmu_raw_readl(S5P_PMU_SPARE2) && |
| !atomic_read(&cpu1_wakeup)) |
| cpu_relax(); |
| |
| if (!atomic_read(&cpu1_wakeup)) |
| exynos_core_restart(1); |
| } |
| |
| while (!atomic_read(&cpu1_wakeup)) { |
| smp_rmb(); |
| |
| /* |
| * Poke cpu1 out of the boot rom |
| */ |
| |
| ret = exynos_set_boot_addr(1, boot_addr); |
| if (ret) |
| goto fail; |
| |
| call_firmware_op(cpu_boot, 1); |
| |
| if (soc_is_exynos3250()) |
| dsb_sev(); |
| else |
| arch_send_wakeup_ipi_mask(cpumask_of(1)); |
| } |
| } |
| fail: |
| return ret; |
| } |
| |
| static int exynos_wfi_finisher(unsigned long flags) |
| { |
| if (soc_is_exynos3250()) |
| flush_cache_all(); |
| cpu_do_idle(); |
| |
| return -1; |
| } |
| |
| static int exynos_cpu1_powerdown(void) |
| { |
| int ret = -1; |
| |
| /* |
| * Idle sequence for cpu1 |
| */ |
| if (cpu_pm_enter()) |
| goto cpu1_aborted; |
| |
| /* |
| * Turn off cpu 1 |
| */ |
| exynos_cpu_power_down(1); |
| |
| if (soc_is_exynos3250()) |
| pmu_raw_writel(0, S5P_PMU_SPARE2); |
| |
| ret = cpu_suspend(0, exynos_wfi_finisher); |
| |
| cpu_pm_exit(); |
| |
| cpu1_aborted: |
| dsb(); |
| /* |
| * Notify cpu 0 that cpu 1 is awake |
| */ |
| atomic_set(&cpu1_wakeup, 1); |
| |
| return ret; |
| } |
| |
| static void exynos_pre_enter_aftr(void) |
| { |
| unsigned long boot_addr = virt_to_phys(exynos_cpu_resume); |
| |
| (void)exynos_set_boot_addr(1, boot_addr); |
| } |
| |
| static void exynos_post_enter_aftr(void) |
| { |
| atomic_set(&cpu1_wakeup, 0); |
| } |
| |
| struct cpuidle_exynos_data cpuidle_coupled_exynos_data = { |
| .cpu0_enter_aftr = exynos_cpu0_enter_aftr, |
| .cpu1_powerdown = exynos_cpu1_powerdown, |
| .pre_enter_aftr = exynos_pre_enter_aftr, |
| .post_enter_aftr = exynos_post_enter_aftr, |
| }; |
| #endif /* CONFIG_SMP && CONFIG_ARM_EXYNOS_CPUIDLE */ |