OMAP: GPIO: Implement GPIO as a platform device
Implement GPIO as a platform device.
GPIO APIs are used in machine_init functions. Hence it is
required to complete GPIO probe before board_init. Therefore
GPIO device register and driver register are implemented as
postcore_initcalls.
omap_gpio_init() does nothing now and this function would be
removed in the next patch as it's usage is spread across most
of the board files.
Inorder to convert GPIO as platform device, modifications are
required in clockxxxx_data.c file for OMAP1 so that device names
can be used to obtain clock instead of getting clocks by
name/NULL ptr.
Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling
or disabling the clocks, modify sysconfig settings and remove usage
of clock FW APIs.
Note 1: Converting GPIO driver to use runtime PM APIs is not done as a
separate patch because GPIO clock names are different for various OMAPs
and are different for some of the banks in the same CPU. This would need
usage of cpu_is checks and bank id checks while using clock FW APIs in
the gpio driver. Hence while making GPIO a platform driver framework,
PM runtime APIs are used directly.
Note 2: While implementing GPIO as a platform device, pm runtime APIs
are used as mentioned above and modification is not done in gpio's
prepare for idle/ resume after idle functions. This would be done
in the next patch series and GPIO driver would be made to use dev_pm_ops
instead of sysdev_class in that series only.
Due to the above, the GPIO driver implicitly relies on
CM_AUTOIDLE = 1 on its iclk for power management to work, since the
driver never disables its iclk.
This would be taken care in the next patch series (see Note 3 below).
Refer to
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html
for more details.
Note 3: only pm_runtime_get_sync is called in gpio's probe() and
pm_runtime_put* is never called. This is to make the implementation
similar to the existing GPIO code. Another patch series would be sent
to correct this.
In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They
are enabled/ disabled whenever required using clock framework APIs
TODO:
1. Cleanup the GPIO driver. Use function pointers and register
offest pointers instead of using hardcoded values
2. Remove all cpu_is_ checks and OMAP specific macros
3. Remove usage of gpio_bank array so that only
instance specific information is used in driver code
4. Rename 'method'/ avoid it's usage
5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4
6. Modify gpio's prepare for idle/ resume after idle functions
to use runtime pm implentation.
Signed-off-by: Charulatha V <charu@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Basak, Partha <p-basak2@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
[tony@atomide.com: updated for bank specific revision and updated boards]
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index de3cc13..0b1c07f 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -49,6 +49,12 @@
obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o
endif
+# GPIO
+obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
+obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
+
# LEDs support
led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 9d97a72..ce4d69c 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -141,7 +141,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
}
static struct map_desc ams_delta_io_desc[] __initdata = {
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 295ab67..0c3f396 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -327,7 +327,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index dd35efd..082a73c 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -374,7 +374,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
}
static struct omap_usb_config h2_usb_config __initdata = {
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7871919..d2cff50 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -437,7 +437,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
}
static void __init h3_map_io(void)
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 071af3e..faa344f 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -577,8 +577,6 @@
printk(KERN_INFO "HTC Herald init.\n");
/* Do board initialization before we register all the devices */
- omap_gpio_init();
-
omap_board_config = htcherald_config;
omap_board_config_size = ARRAY_SIZE(htcherald_config);
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 0feaa67..a051acd 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -290,7 +290,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
omap1510_fpga_init_irq();
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index aa8375b..605495b 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -246,7 +246,6 @@
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
- omap_gpio_init();
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
hwa742_dev_init();
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 30bdbdb..d44e717 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -283,7 +283,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
}
static struct omap_usb_config osk_usb_config __initdata = {
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index f32738b..994dc6f 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -63,7 +63,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
}
static const int palmte_keymap[] = {
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index d7a245c..2afac59 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -62,7 +62,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
}
static int palmz71_keymap[] = {
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 07660be..69fda21 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -295,7 +295,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index d25f59e..463862c6 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -409,7 +409,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
}
/*----------------------------------------*/
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index f5992c2..789f5ba 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -158,7 +158,6 @@
{
omap1_init_common_hw();
omap_init_irq();
- omap_gpio_init();
}
static void __init voiceblue_init(void)
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index af54114..423d21d 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -143,7 +143,7 @@
* activation. [ GPIO code for 1510 ]
*/
static struct clk arm_gpio_ck = {
- .name = "arm_gpio_ck",
+ .name = "ick",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.flags = ENABLE_ON_INIT,
@@ -684,7 +684,7 @@
CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
- CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310),
+ CLK("omap_gpio.0", "ick", &arm_gpio_ck, CK_1510 | CK_310),
CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ce7b1f0..fbc8739 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
- common.o
+ common.o gpio.o
omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o
hwmod-common = omap_hwmod.o \
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index b527f8d..0f14001 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -145,7 +145,6 @@
omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
- omap_gpio_init();
}
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 4e3742c..5cb23f3 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -328,7 +328,6 @@
omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
- omap_gpio_init();
}
static int sdp3430_batt_table[] = {
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index bbcf580..b23f401 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -76,7 +76,6 @@
omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);
omap_init_irq();
- omap_gpio_init();
}
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 94d989b..8842ec5 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -223,7 +223,6 @@
omap2_gp_clockevent_set_gptimer(1);
#endif
gic_init_irq();
- omap_gpio_init();
}
static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 13ead33..8ba4047 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -50,7 +49,6 @@
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
- omap_gpio_init();
}
static void __init am3517_crane_init(void)
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 0739950..df6900e 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -392,7 +392,6 @@
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
- omap_gpio_init();
}
static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 6ae777e..f51f4f1 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -280,7 +280,6 @@
omap_board_config_size = ARRAY_SIZE(apollon_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
- omap_gpio_init();
}
static void __init apollon_led_init(void)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 63f764e..78b67fb 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -686,7 +686,6 @@
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
- omap_gpio_init();
}
static struct omap_board_mux board_mux[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 1dd303e..7ee23da 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -250,7 +250,6 @@
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
- omap_gpio_init();
}
static struct omap_board_mux board_mux[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 53ac762..a30a7fc 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -450,7 +450,6 @@
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
- omap_gpio_init();
}
static void __init devkit8000_ads7846_init(void)
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 929993b..68e6f4c 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -293,7 +293,6 @@
omap_board_config_size = ARRAY_SIZE(h4_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
- omap_gpio_init();
h4_init_flash();
}
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index fe76b59..3bda186 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -484,7 +484,6 @@
{
omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
omap_init_irq();
- omap_gpio_init();
}
static struct twl4030_codec_audio_data igep2_audio_data = {
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index 22b0b25..c7c57cd 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -291,7 +291,6 @@
{
omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
omap_init_irq();
- omap_gpio_init();
}
static struct twl4030_platform_data igep3_twl4030_pdata = {
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 3dab44e..d97e3ca 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -294,7 +294,6 @@
omap_board_config_size = ARRAY_SIZE(ldp_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
- omap_gpio_init();
}
static struct twl4030_usb_data ldp_usb_data = {
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e823c70..d8a4893 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -641,7 +641,6 @@
{
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
- omap_gpio_init();
}
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 14f4224..a4131be 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -490,7 +490,6 @@
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
- omap_gpio_init();
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b04365c..5ca0220 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -625,7 +625,6 @@
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
omap_init_irq();
- omap_gpio_init();
}
static struct platform_device *omap3_evm_devices[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 5f7d2c1..2632940 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -199,7 +199,6 @@
{
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
- omap_gpio_init();
}
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 89ed1be..1031d7c 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -639,7 +639,6 @@
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
- omap_gpio_init();
}
static void pandora_wl1251_set_power(bool enable)
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index f252721..ea13e2a 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -589,7 +589,6 @@
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
- omap_gpio_init();
}
static struct platform_device *omap3_stalker_devices[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 41104bb..2339964 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -428,7 +428,6 @@
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
- omap_gpio_init();
}
static struct platform_device *omap3_touchbook_devices[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 801f814..38f942b 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -79,7 +79,6 @@
{
omap2_init_common_hw(NULL, NULL);
gic_init_irq();
- omap_gpio_init();
}
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 7053bc0..805b783 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -416,7 +416,6 @@
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
- omap_gpio_init();
}
static struct platform_device *overo_devices[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 36f2cf4..1c3b079 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -108,7 +108,6 @@
sdrc_params = rx51_get_sdram_timings();
omap2_init_common_hw(sdrc_params, sdrc_params);
omap_init_irq();
- omap_gpio_init();
}
extern void __init rx51_peripherals_init(void);
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 3da69e4..abd864a 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -43,7 +43,6 @@
h8mbx00u0mer0em_sdrc_params);
omap_init_irq();
- omap_gpio_init();
}
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 2b0d901..6f53dee 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -21,6 +21,8 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -32,7 +34,6 @@
/*
* OMAP1510 GPIO registers
*/
-#define OMAP1510_GPIO_BASE 0xfffce000
#define OMAP1510_GPIO_DATA_INPUT 0x00
#define OMAP1510_GPIO_DATA_OUTPUT 0x04
#define OMAP1510_GPIO_DIR_CONTROL 0x08
@@ -46,10 +47,6 @@
/*
* OMAP1610 specific GPIO registers
*/
-#define OMAP1610_GPIO1_BASE 0xfffbe400
-#define OMAP1610_GPIO2_BASE 0xfffbec00
-#define OMAP1610_GPIO3_BASE 0xfffbb400
-#define OMAP1610_GPIO4_BASE 0xfffbbc00
#define OMAP1610_GPIO_REVISION 0x0000
#define OMAP1610_GPIO_SYSCONFIG 0x0010
#define OMAP1610_GPIO_SYSSTATUS 0x0014
@@ -71,12 +68,6 @@
/*
* OMAP7XX specific GPIO registers
*/
-#define OMAP7XX_GPIO1_BASE 0xfffbc000
-#define OMAP7XX_GPIO2_BASE 0xfffbc800
-#define OMAP7XX_GPIO3_BASE 0xfffbd000
-#define OMAP7XX_GPIO4_BASE 0xfffbd800
-#define OMAP7XX_GPIO5_BASE 0xfffbe000
-#define OMAP7XX_GPIO6_BASE 0xfffbe800
#define OMAP7XX_GPIO_DATA_INPUT 0x00
#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
#define OMAP7XX_GPIO_DIR_CONTROL 0x08
@@ -84,25 +75,10 @@
#define OMAP7XX_GPIO_INT_MASK 0x10
#define OMAP7XX_GPIO_INT_STATUS 0x14
-#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
-
/*
- * omap24xx specific GPIO registers
+ * omap2+ specific GPIO registers
*/
-#define OMAP242X_GPIO1_BASE 0x48018000
-#define OMAP242X_GPIO2_BASE 0x4801a000
-#define OMAP242X_GPIO3_BASE 0x4801c000
-#define OMAP242X_GPIO4_BASE 0x4801e000
-
-#define OMAP243X_GPIO1_BASE 0x4900C000
-#define OMAP243X_GPIO2_BASE 0x4900E000
-#define OMAP243X_GPIO3_BASE 0x49010000
-#define OMAP243X_GPIO4_BASE 0x49012000
-#define OMAP243X_GPIO5_BASE 0x480B6000
-
#define OMAP24XX_GPIO_REVISION 0x0000
-#define OMAP24XX_GPIO_SYSCONFIG 0x0010
-#define OMAP24XX_GPIO_SYSSTATUS 0x0014
#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
#define OMAP24XX_GPIO_IRQENABLE2 0x002c
@@ -126,7 +102,6 @@
#define OMAP24XX_GPIO_SETDATAOUT 0x0094
#define OMAP4_GPIO_REVISION 0x0000
-#define OMAP4_GPIO_SYSCONFIG 0x0010
#define OMAP4_GPIO_EOI 0x0020
#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
@@ -138,7 +113,6 @@
#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
#define OMAP4_GPIO_IRQWAKEN0 0x0044
#define OMAP4_GPIO_IRQWAKEN1 0x0048
-#define OMAP4_GPIO_SYSSTATUS 0x0114
#define OMAP4_GPIO_IRQENABLE1 0x011c
#define OMAP4_GPIO_WAKE_EN 0x0120
#define OMAP4_GPIO_IRQSTATUS2 0x0128
@@ -159,26 +133,6 @@
#define OMAP4_GPIO_SETWKUENA 0x0184
#define OMAP4_GPIO_CLEARDATAOUT 0x0190
#define OMAP4_GPIO_SETDATAOUT 0x0194
-/*
- * omap34xx specific GPIO registers
- */
-
-#define OMAP34XX_GPIO1_BASE 0x48310000
-#define OMAP34XX_GPIO2_BASE 0x49050000
-#define OMAP34XX_GPIO3_BASE 0x49052000
-#define OMAP34XX_GPIO4_BASE 0x49054000
-#define OMAP34XX_GPIO5_BASE 0x49056000
-#define OMAP34XX_GPIO6_BASE 0x49058000
-
-/*
- * OMAP44XX specific GPIO registers
- */
-#define OMAP44XX_GPIO1_BASE 0x4a310000
-#define OMAP44XX_GPIO2_BASE 0x48055000
-#define OMAP44XX_GPIO3_BASE 0x48057000
-#define OMAP44XX_GPIO4_BASE 0x48059000
-#define OMAP44XX_GPIO5_BASE 0x4805B000
-#define OMAP44XX_GPIO6_BASE 0x4805D000
struct gpio_bank {
unsigned long pbase;
@@ -203,97 +157,12 @@
struct clk *dbck;
u32 mod_usage;
u32 dbck_enable_mask;
+ struct device *dev;
+ bool dbck_flag;
};
-#ifdef CONFIG_ARCH_OMAP16XX
-static struct gpio_bank gpio_bank_1610[5] = {
- { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
- METHOD_MPUIO },
- { OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
- METHOD_GPIO_1610 },
- { OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16,
- METHOD_GPIO_1610 },
- { OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32,
- METHOD_GPIO_1610 },
- { OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48,
- METHOD_GPIO_1610 },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct gpio_bank gpio_bank_1510[2] = {
- { OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
- METHOD_MPUIO },
- { OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
- METHOD_GPIO_1510 }
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct gpio_bank gpio_bank_7xx[7] = {
- { OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE,
- METHOD_MPUIO },
- { OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE,
- METHOD_GPIO_7XX },
- { OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32,
- METHOD_GPIO_7XX },
- { OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64,
- METHOD_GPIO_7XX },
- { OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96,
- METHOD_GPIO_7XX },
- { OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128,
- METHOD_GPIO_7XX },
- { OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160,
- METHOD_GPIO_7XX },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-
-static struct gpio_bank gpio_bank_242x[4] = {
- { OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
- METHOD_GPIO_24XX },
- { OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
- METHOD_GPIO_24XX },
- { OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
- METHOD_GPIO_24XX },
- { OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
- METHOD_GPIO_24XX },
-};
-
-static struct gpio_bank gpio_bank_243x[5] = {
- { OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
- METHOD_GPIO_24XX },
- { OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
- METHOD_GPIO_24XX },
- { OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
- METHOD_GPIO_24XX },
- { OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
- METHOD_GPIO_24XX },
- { OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
- METHOD_GPIO_24XX },
-};
-
-#endif
-
#ifdef CONFIG_ARCH_OMAP3
-static struct gpio_bank gpio_bank_34xx[6] = {
- { OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
- METHOD_GPIO_24XX },
- { OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,
- METHOD_GPIO_24XX },
- { OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,
- METHOD_GPIO_24XX },
- { OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,
- METHOD_GPIO_24XX },
- { OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128,
- METHOD_GPIO_24XX },
- { OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160,
- METHOD_GPIO_24XX },
-};
-
struct omap3_gpio_regs {
- u32 sysconfig;
u32 irqenable1;
u32 irqenable2;
u32 wake_en;
@@ -309,25 +178,14 @@
static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
#endif
-#ifdef CONFIG_ARCH_OMAP4
-static struct gpio_bank gpio_bank_44xx[6] = {
- { OMAP44XX_GPIO1_BASE, NULL, OMAP44XX_IRQ_GPIO1, IH_GPIO_BASE,
- METHOD_GPIO_44XX },
- { OMAP44XX_GPIO2_BASE, NULL, OMAP44XX_IRQ_GPIO2, IH_GPIO_BASE + 32,
- METHOD_GPIO_44XX },
- { OMAP44XX_GPIO3_BASE, NULL, OMAP44XX_IRQ_GPIO3, IH_GPIO_BASE + 64,
- METHOD_GPIO_44XX },
- { OMAP44XX_GPIO4_BASE, NULL, OMAP44XX_IRQ_GPIO4, IH_GPIO_BASE + 96,
- METHOD_GPIO_44XX },
- { OMAP44XX_GPIO5_BASE, NULL, OMAP44XX_IRQ_GPIO5, IH_GPIO_BASE + 128,
- METHOD_GPIO_44XX },
- { OMAP44XX_GPIO6_BASE, NULL, OMAP44XX_IRQ_GPIO6, IH_GPIO_BASE + 160,
- METHOD_GPIO_44XX },
-};
-
-#endif
-
+/*
+ * TODO: Cleanup gpio_bank usage as it is having information
+ * related to all instances of the device
+ */
static struct gpio_bank *gpio_bank;
+
+static int bank_width;
+
/* TODO: Analyze removing gpio_bank_count usage from driver code */
int gpio_bank_count;
@@ -634,6 +492,9 @@
u32 val;
u32 l;
+ if (!bank->dbck_flag)
+ return;
+
if (debounce < 32)
debounce = 0x01;
else if (debounce > 7936)
@@ -643,7 +504,7 @@
l = 1 << get_gpio_index(gpio);
- if (cpu_is_omap44xx())
+ if (bank->method == METHOD_GPIO_44XX)
reg += OMAP4_GPIO_DEBOUNCINGTIME;
else
reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
@@ -651,7 +512,7 @@
__raw_writel(debounce, reg);
reg = bank->base;
- if (cpu_is_omap44xx())
+ if (bank->method == METHOD_GPIO_44XX)
reg += OMAP4_GPIO_DEBOUNCENABLE;
else
reg += OMAP24XX_GPIO_DEBOUNCE_EN;
@@ -660,12 +521,10 @@
if (debounce) {
val |= l;
- if (cpu_is_omap34xx() || cpu_is_omap44xx())
- clk_enable(bank->dbck);
+ clk_enable(bank->dbck);
} else {
val &= ~l;
- if (cpu_is_omap34xx() || cpu_is_omap44xx())
- clk_disable(bank->dbck);
+ clk_disable(bank->dbck);
}
bank->dbck_enable_mask = val;
@@ -1537,7 +1396,8 @@
static inline void mpuio_init(void)
{
- platform_set_drvdata(&omap_mpuio_device, &gpio_bank_1610[0]);
+ struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0));
+ platform_set_drvdata(&omap_mpuio_device, bank);
if (platform_driver_register(&omap_mpuio_driver) == 0)
(void) platform_device_register(&omap_mpuio_device);
@@ -1642,6 +1502,13 @@
unsigned long flags;
bank = container_of(chip, struct gpio_bank, chip);
+
+ if (!bank->dbck) {
+ bank->dbck = clk_get(bank->dev, "dbclk");
+ if (IS_ERR(bank->dbck))
+ dev_err(bank->dev, "Could not get gpio dbck\n");
+ }
+
spin_lock_irqsave(&bank->lock, flags);
_set_gpio_debounce(bank, offset, debounce);
spin_unlock_irqrestore(&bank->lock, flags);
@@ -1670,24 +1537,6 @@
/*---------------------------------------------------------------------*/
-static int initialized;
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
-static struct clk * gpio_ick;
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-static struct clk * gpio_fck;
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2430)
-static struct clk * gpio5_ick;
-static struct clk * gpio5_fck;
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
-#endif
-
static void __init omap_gpio_show_rev(struct gpio_bank *bank)
{
u32 rev;
@@ -1710,6 +1559,19 @@
*/
static struct lock_class_key gpio_lock_class;
+static inline int init_gpio_info(struct platform_device *pdev)
+{
+ /* TODO: Analyze removing gpio_bank_count usage from driver code */
+ gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank),
+ GFP_KERNEL);
+ if (!gpio_bank) {
+ dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/* TODO: Cleanup cpu_is_* checks */
static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
{
if (cpu_class_is_omap2()) {
@@ -1773,16 +1635,9 @@
static void __init omap_gpio_chip_init(struct gpio_bank *bank)
{
- int j, bank_width = 16;
+ int j;
static int gpio;
- if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX)
- bank_width = 32; /* 7xx has 32-bit GPIOs */
-
- if ((bank->method == METHOD_GPIO_24XX) ||
- (bank->method == METHOD_GPIO_44XX))
- bank_width = 32;
-
bank->mod_usage = 0;
/*
* REVISIT eventually switch from OMAP-specific gpio structs
@@ -1826,139 +1681,68 @@
set_irq_data(bank->irq, bank);
}
-static int __init _omap_gpio_init(void)
+static int __devinit omap_gpio_probe(struct platform_device *pdev)
{
- int i;
+ static int gpio_init_done;
+ struct omap_gpio_platform_data *pdata;
+ struct resource *res;
+ int id;
struct gpio_bank *bank;
- int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
- char clk_name[11];
- initialized = 1;
+ if (!pdev->dev.platform_data)
+ return -EINVAL;
-#if defined(CONFIG_ARCH_OMAP1)
- if (cpu_is_omap15xx()) {
- gpio_ick = clk_get(NULL, "arm_gpio_ck");
- if (IS_ERR(gpio_ick))
- printk("Could not get arm_gpio_ck\n");
- else
- clk_enable(gpio_ick);
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP2)
- if (cpu_class_is_omap2()) {
- gpio_ick = clk_get(NULL, "gpios_ick");
- if (IS_ERR(gpio_ick))
- printk("Could not get gpios_ick\n");
- else
- clk_enable(gpio_ick);
- gpio_fck = clk_get(NULL, "gpios_fck");
- if (IS_ERR(gpio_fck))
- printk("Could not get gpios_fck\n");
- else
- clk_enable(gpio_fck);
+ pdata = pdev->dev.platform_data;
- /*
- * On 2430 & 3430 GPIO 5 uses CORE L4 ICLK
- */
-#if defined(CONFIG_ARCH_OMAP2430)
- if (cpu_is_omap2430()) {
- gpio5_ick = clk_get(NULL, "gpio5_ick");
- if (IS_ERR(gpio5_ick))
- printk("Could not get gpio5_ick\n");
- else
- clk_enable(gpio5_ick);
- gpio5_fck = clk_get(NULL, "gpio5_fck");
- if (IS_ERR(gpio5_fck))
- printk("Could not get gpio5_fck\n");
- else
- clk_enable(gpio5_fck);
- }
-#endif
- }
-#endif
+ if (!gpio_init_done) {
+ int ret;
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
- sprintf(clk_name, "gpio%d_ick", i + 1);
- gpio_iclks[i] = clk_get(NULL, clk_name);
- if (IS_ERR(gpio_iclks[i]))
- printk(KERN_ERR "Could not get %s\n", clk_name);
- else
- clk_enable(gpio_iclks[i]);
- }
- }
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP15XX
- if (cpu_is_omap15xx()) {
- gpio_bank_count = 2;
- gpio_bank = gpio_bank_1510;
- bank_size = SZ_2K;
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
- if (cpu_is_omap16xx()) {
- gpio_bank_count = 5;
- gpio_bank = gpio_bank_1610;
- bank_size = SZ_2K;
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- if (cpu_is_omap7xx()) {
- gpio_bank_count = 7;
- gpio_bank = gpio_bank_7xx;
- bank_size = SZ_2K;
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP2
- if (cpu_is_omap242x()) {
- gpio_bank_count = 4;
- gpio_bank = gpio_bank_242x;
- }
- if (cpu_is_omap243x()) {
- gpio_bank_count = 5;
- gpio_bank = gpio_bank_243x;
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP3
- if (cpu_is_omap34xx()) {
- gpio_bank_count = OMAP34XX_NR_GPIOS;
- gpio_bank = gpio_bank_34xx;
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- if (cpu_is_omap44xx()) {
- gpio_bank_count = OMAP34XX_NR_GPIOS;
- gpio_bank = gpio_bank_44xx;
- }
-#endif
- for (i = 0; i < gpio_bank_count; i++) {
-
- bank = &gpio_bank[i];
- spin_lock_init(&bank->lock);
-
- /* Static mapping, never released */
- bank->base = ioremap(bank->pbase, bank_size);
- if (!bank->base) {
- printk(KERN_ERR "Could not ioremap gpio bank%i\n", i);
- continue;
- }
-
- omap_gpio_mod_init(bank, i);
- omap_gpio_chip_init(bank);
-
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- sprintf(clk_name, "gpio%d_dbck", i + 1);
- bank->dbck = clk_get(NULL, clk_name);
- if (IS_ERR(bank->dbck))
- printk(KERN_ERR "Could not get %s\n", clk_name);
- }
+ ret = init_gpio_info(pdev);
+ if (ret)
+ return ret;
}
+ id = pdev->id;
+ bank = &gpio_bank[id];
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (unlikely(!res)) {
+ dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id);
+ return -ENODEV;
+ }
+
+ bank->irq = res->start;
+ bank->virtual_irq_start = pdata->virtual_irq_start;
+ bank->method = pdata->bank_type;
+ bank->dev = &pdev->dev;
+ bank->dbck_flag = pdata->dbck_flag;
+ bank_width = pdata->bank_width;
+
+ spin_lock_init(&bank->lock);
+
+ /* Static mapping, never released */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!res)) {
+ dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id);
+ return -ENODEV;
+ }
+
+ bank->base = ioremap(res->start, resource_size(res));
+ if (!bank->base) {
+ dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id);
+ return -ENOMEM;
+ }
+
+ pm_runtime_enable(bank->dev);
+ pm_runtime_get_sync(bank->dev);
+
+ omap_gpio_mod_init(bank, id);
+ omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
+ if (!gpio_init_done)
+ gpio_init_done = 1;
+
return 0;
}
@@ -2252,8 +2036,6 @@
/* saving banks from 2-6 only since GPIO1 is in WKUP */
for (i = 1; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
- gpio_context[i].sysconfig =
- __raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG);
gpio_context[i].irqenable1 =
__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
gpio_context[i].irqenable2 =
@@ -2284,8 +2066,6 @@
for (i = 1; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
- __raw_writel(gpio_context[i].sysconfig,
- bank->base + OMAP24XX_GPIO_SYSCONFIG);
__raw_writel(gpio_context[i].irqenable1,
bank->base + OMAP24XX_GPIO_IRQENABLE1);
__raw_writel(gpio_context[i].irqenable2,
@@ -2310,25 +2090,28 @@
}
#endif
+static struct platform_driver omap_gpio_driver = {
+ .probe = omap_gpio_probe,
+ .driver = {
+ .name = "omap_gpio",
+ },
+};
+
/*
- * This may get called early from board specific init
- * for boards that have interrupts routed via FPGA.
+ * gpio driver register needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap_gpio_drv_reg() is a postcore_initcall.
*/
-int __init omap_gpio_init(void)
+static int __init omap_gpio_drv_reg(void)
{
- if (!initialized)
- return _omap_gpio_init();
- else
- return 0;
+ return platform_driver_register(&omap_gpio_driver);
}
+postcore_initcall(omap_gpio_drv_reg);
static int __init omap_gpio_sysinit(void)
{
int ret = 0;
- if (!initialized)
- ret = _omap_gpio_init();
-
mpuio_init();
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 24892a6..5f118ff 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -94,7 +94,6 @@
/* TODO: Analyze removing gpio_bank_count usage from driver code */
extern int gpio_bank_count;
-extern int omap_gpio_init(void); /* Call from board init only */
extern void omap2_gpio_prepare_for_idle(int power_state);
extern void omap2_gpio_resume_after_idle(void);
extern void omap_set_gpio_debounce(int gpio, int enable);