Merge tag 'pm-3.13-rc3-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixup from Rafael Wysocki:
"This reverts two cpufreq commits that fixed issues for some people,
but broke things for others, so revert them and we'll need to fix the
original problems differently"
* tag 'pm-3.13-rc3-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "cpufreq: fix garbage kobjects on errors during suspend/resume"
Revert "cpufreq: suspend governors on system suspend/hibernate"
diff --git a/CREDITS b/CREDITS
index 4fc997d..4c7738f 100644
--- a/CREDITS
+++ b/CREDITS
@@ -655,6 +655,11 @@
S: Stanford, California 94305
S: USA
+N: Carlos Chinea
+E: carlos.chinea@nokia.com
+E: cch.devel@gmail.com
+D: Author of HSI Subsystem
+
N: Randolph Chung
E: tausq@debian.org
D: Linux/PA-RISC hacker
diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c
index 0c980ad..4d17487 100644
--- a/Documentation/mic/mpssd/mpssd.c
+++ b/Documentation/mic/mpssd/mpssd.c
@@ -313,7 +313,7 @@
int i;
void *dp = get_dp(mic, type);
- for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
+ for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE;
i += mic_total_desc_size(d)) {
d = dp + i;
@@ -445,8 +445,8 @@
__func__, mic->name, vr0->va, vr0->info, vr_size,
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
mpsslog("magic 0x%x expected 0x%x\n",
- vr0->info->magic, MIC_MAGIC + type);
- assert(vr0->info->magic == MIC_MAGIC + type);
+ le32toh(vr0->info->magic), MIC_MAGIC + type);
+ assert(le32toh(vr0->info->magic) == MIC_MAGIC + type);
if (vr1) {
vr1->va = (struct mic_vring *)
&va[MIC_DEVICE_PAGE_END + vr_size];
@@ -458,8 +458,8 @@
__func__, mic->name, vr1->va, vr1->info, vr_size,
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
mpsslog("magic 0x%x expected 0x%x\n",
- vr1->info->magic, MIC_MAGIC + type + 1);
- assert(vr1->info->magic == MIC_MAGIC + type + 1);
+ le32toh(vr1->info->magic), MIC_MAGIC + type + 1);
+ assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1);
}
done:
return va;
@@ -520,7 +520,7 @@
virtio_net(void *arg)
{
static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
- static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
+ static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64)));
struct iovec vnet_iov[2][2] = {
{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
{ .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
@@ -1412,6 +1412,12 @@
}
do {
+ ret = lseek(fd, 0, SEEK_SET);
+ if (ret < 0) {
+ mpsslog("%s: Failed to seek to file start '%s': %s\n",
+ mic->name, pathname, strerror(errno));
+ goto close_error1;
+ }
ret = read(fd, value, sizeof(value));
if (ret < 0) {
mpsslog("%s: Failed to read sysfs entry '%s': %s\n",
diff --git a/MAINTAINERS b/MAINTAINERS
index 13c15c8..9486fb6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2138,7 +2138,8 @@
F: Documentation/zh_CN/
CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
-M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+M: Peter Chen <Peter.Chen@freescale.com>
+T: git://github.com/hzpeterchen/linux-usb.git
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/chipidea/
@@ -4044,6 +4045,14 @@
S: Maintained
F: fs/hpfs/
+HSI SUBSYSTEM
+M: Sebastian Reichel <sre@debian.org>
+S: Maintained
+F: Documentation/ABI/testing/sysfs-bus-hsi
+F: drivers/hsi/
+F: include/linux/hsi/
+F: include/uapi/linux/hsi/
+
HSO 3G MODEM DRIVER
M: Jan Dumon <j.dumon@option.com>
W: http://www.pharscape.org
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 88c8b6c1..6d4dd22 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -159,8 +159,7 @@
range 2 32
depends on SMP
# These have to remain sorted largest to smallest
- default "8" if ARCH_XGENE
- default "4"
+ default "8"
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 4cc813e..5727697 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -229,7 +229,7 @@
extern void __iounmap(volatile void __iomem *addr);
extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
-#define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
+#define PROT_DEFAULT (pgprot_default | PTE_DIRTY)
#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
#define PROT_NORMAL (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL))
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index 755f861..b1d2e26 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -43,7 +43,7 @@
* Section
*/
#define PMD_SECT_VALID (_AT(pmdval_t, 1) << 0)
-#define PMD_SECT_PROT_NONE (_AT(pmdval_t, 1) << 2)
+#define PMD_SECT_PROT_NONE (_AT(pmdval_t, 1) << 58)
#define PMD_SECT_USER (_AT(pmdval_t, 1) << 6) /* AP[1] */
#define PMD_SECT_RDONLY (_AT(pmdval_t, 1) << 7) /* AP[2] */
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 7009387..c68cca5 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -282,8 +282,9 @@
* be used where CPUs are brought online dynamically by the kernel.
*/
ENTRY(secondary_entry)
- bl __calc_phys_offset // x2=phys offset
bl el2_setup // Drop to EL1
+ bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
+ bl set_cpu_boot_mode_flag
b secondary_startup
ENDPROC(secondary_entry)
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 421b99f..0f7fec5 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -111,12 +111,12 @@
bl __flush_dcache_all
mov lr, x28
ic iallu // I+BTB cache invalidate
+ tlbi vmalle1is // invalidate I + D TLBs
dsb sy
mov x0, #3 << 20
msr cpacr_el1, x0 // Enable FP/ASIMD
msr mdscr_el1, xzr // Reset mdscr_el1
- tlbi vmalle1is // invalidate I + D TLBs
/*
* Memory region attributes for LPAE:
*
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index 40cc0cf2..e6939e1 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -664,6 +664,13 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro"),
},
},
+ {
+ .ident = "Dell XPS421",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS L421X"),
+ },
+ },
{ }
};
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 3c55ec8..a287cec 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -1082,7 +1082,7 @@
static int arizona_extcon_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
- struct arizona_pdata *pdata;
+ struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_extcon_info *info;
unsigned int val;
int jack_irq_fall, jack_irq_rise;
@@ -1091,8 +1091,6 @@
if (!arizona->dapm || !arizona->dapm->card)
return -EPROBE_DEFER;
- pdata = dev_get_platdata(arizona->dev);
-
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "Failed to allocate memory\n");
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
index 15443d3..7632233 100644
--- a/drivers/extcon/extcon-class.c
+++ b/drivers/extcon/extcon-class.c
@@ -792,6 +792,8 @@
return;
}
+ device_unregister(&edev->dev);
+
if (edev->mutually_exclusive && edev->max_supported) {
for (index = 0; edev->mutually_exclusive[index];
index++)
@@ -812,7 +814,6 @@
if (switch_class)
class_compat_remove_link(switch_class, &edev->dev, NULL);
#endif
- device_unregister(&edev->dev);
put_device(&edev->dev);
}
EXPORT_SYMBOL_GPL(extcon_dev_unregister);
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index a184e19..d87f7cb 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -112,13 +112,15 @@
static void sensor_hub_fill_attr_info(
struct hid_sensor_hub_attribute_info *info,
- s32 index, s32 report_id, s32 units, s32 unit_expo, s32 size)
+ s32 index, s32 report_id, struct hid_field *field)
{
info->index = index;
info->report_id = report_id;
- info->units = units;
- info->unit_expo = unit_expo;
- info->size = size/8;
+ info->units = field->unit;
+ info->unit_expo = field->unit_exponent;
+ info->size = (field->report_size * field->report_count)/8;
+ info->logical_minimum = field->logical_minimum;
+ info->logical_maximum = field->logical_maximum;
}
static struct hid_sensor_hub_callbacks *sensor_hub_get_callback(
@@ -325,9 +327,7 @@
if (field->physical == usage_id &&
field->logical == attr_usage_id) {
sensor_hub_fill_attr_info(info, i, report->id,
- field->unit, field->unit_exponent,
- field->report_size *
- field->report_count);
+ field);
ret = 0;
} else {
for (j = 0; j < field->maxusage; ++j) {
@@ -336,11 +336,7 @@
field->usage[j].collection_index ==
collection_index) {
sensor_hub_fill_attr_info(info,
- i, report->id,
- field->unit,
- field->unit_exponent,
- field->report_size *
- field->report_count);
+ i, report->id, field);
ret = 0;
break;
}
diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
index 1178121..39188b7 100644
--- a/drivers/iio/common/hid-sensors/Kconfig
+++ b/drivers/iio/common/hid-sensors/Kconfig
@@ -25,13 +25,4 @@
If this driver is compiled as a module, it will be named
hid-sensor-trigger.
-config HID_SENSOR_ENUM_BASE_QUIRKS
- bool "ENUM base quirks for HID Sensor IIO drivers"
- depends on HID_SENSOR_IIO_COMMON
- help
- Say yes here to build support for sensor hub FW using
- enumeration, which is using 1 as base instead of 0.
- Since logical minimum is still set 0 instead of 1,
- there is no easy way to differentiate.
-
endmenu
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index bbd6426..7dcf839 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -33,24 +33,34 @@
{
struct hid_sensor_common *st = iio_trigger_get_drvdata(trig);
int state_val;
+ int report_val;
if (state) {
if (sensor_hub_device_open(st->hsdev))
return -EIO;
- } else
- sensor_hub_device_close(st->hsdev);
+ state_val =
+ HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM;
+ report_val =
+ HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM;
- state_val = state ? 1 : 0;
- if (IS_ENABLED(CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS))
- ++state_val;
+ } else {
+ sensor_hub_device_close(st->hsdev);
+ state_val =
+ HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM;
+ report_val =
+ HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM;
+ }
+
st->data_ready = state;
+ state_val += st->power_state.logical_minimum;
+ report_val += st->report_state.logical_minimum;
sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
st->power_state.index,
(s32)state_val);
sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
st->report_state.index,
- (s32)state_val);
+ (s32)report_val);
return 0;
}
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index b0d65df..a022f27 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -43,6 +43,7 @@
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
+ select IRQ_WORK
help
Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
hooked to an I2C bus.
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index dbd2047..3ed2351 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -536,7 +536,8 @@
__set_bit(EV_REP, input->evbit);
for (i = 0; i < input->keycodemax; i++)
- __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
+ if (kpad->keycode[i] <= KEY_MAX)
+ __set_bit(kpad->keycode[i], input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
if (kpad->gpimapsize)
diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c
index 67d12b3..60dafd4 100644
--- a/drivers/input/keyboard/adp5589-keys.c
+++ b/drivers/input/keyboard/adp5589-keys.c
@@ -992,7 +992,8 @@
__set_bit(EV_REP, input->evbit);
for (i = 0; i < input->keycodemax; i++)
- __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
+ if (kpad->keycode[i] <= KEY_MAX)
+ __set_bit(kpad->keycode[i], input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
if (kpad->gpimapsize)
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index fc88fb4..09b91d0 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -289,7 +289,8 @@
__set_bit(EV_REP, input->evbit);
for (i = 0; i < input->keycodemax; i++)
- __set_bit(bf54x_kpad->keycode[i] & KEY_MAX, input->keybit);
+ if (bf54x_kpad->keycode[i] <= KEY_MAX)
+ __set_bit(bf54x_kpad->keycode[i], input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
error = input_register_device(input);
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index e373929..0deca5a 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -113,9 +113,12 @@
idev->keycodemax = ARRAY_SIZE(lp->btncode);
for (i = 0; i < ARRAY_SIZE(pcf8574_kp_btncode); i++) {
- lp->btncode[i] = pcf8574_kp_btncode[i];
- __set_bit(lp->btncode[i] & KEY_MAX, idev->keybit);
+ if (lp->btncode[i] <= KEY_MAX) {
+ lp->btncode[i] = pcf8574_kp_btncode[i];
+ __set_bit(lp->btncode[i], idev->keybit);
+ }
}
+ __clear_bit(KEY_RESERVED, idev->keybit);
sprintf(lp->name, DRV_NAME);
sprintf(lp->phys, "kp_data/input0");
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index ca7a26f..5cf62e3 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -70,6 +70,25 @@
{ PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
};
+static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
+ { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */
+ { PSMOUSE_CMD_SETRATE, 0x0a }, /* 1 */
+ { PSMOUSE_CMD_SETRATE, 0x14 }, /* 2 */
+ { PSMOUSE_CMD_SETRATE, 0x28 }, /* 3 */
+ { PSMOUSE_CMD_SETRATE, 0x3c }, /* 4 */
+ { PSMOUSE_CMD_SETRATE, 0x50 }, /* 5 */
+ { PSMOUSE_CMD_SETRATE, 0x64 }, /* 6 */
+ { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 7 */
+ { PSMOUSE_CMD_GETID, 0x00 }, /* 8 */
+ { PSMOUSE_CMD_GETINFO, 0x00 }, /* 9 */
+ { PSMOUSE_CMD_SETRES, 0x00 }, /* a */
+ { PSMOUSE_CMD_SETRES, 0x01 }, /* b */
+ { PSMOUSE_CMD_SETRES, 0x02 }, /* c */
+ { PSMOUSE_CMD_SETRES, 0x03 }, /* d */
+ { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* e */
+ { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
+};
+
#define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */
#define ALPS_PASS 0x04 /* device has a pass-through port */
@@ -103,6 +122,7 @@
/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
{ { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
+ { { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT }, /* Dell XT2 */
{ { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
{ { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
@@ -645,6 +665,76 @@
alps_process_touchpad_packet_v3(psmouse);
}
+static void alps_process_packet_v6(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ struct input_dev *dev = psmouse->dev;
+ struct input_dev *dev2 = priv->dev2;
+ int x, y, z, left, right, middle;
+
+ /*
+ * We can use Byte5 to distinguish if the packet is from Touchpad
+ * or Trackpoint.
+ * Touchpad: 0 - 0x7E
+ * Trackpoint: 0x7F
+ */
+ if (packet[5] == 0x7F) {
+ /* It should be a DualPoint when received Trackpoint packet */
+ if (!(priv->flags & ALPS_DUALPOINT))
+ return;
+
+ /* Trackpoint packet */
+ x = packet[1] | ((packet[3] & 0x20) << 2);
+ y = packet[2] | ((packet[3] & 0x40) << 1);
+ z = packet[4];
+ left = packet[3] & 0x01;
+ right = packet[3] & 0x02;
+ middle = packet[3] & 0x04;
+
+ /* To prevent the cursor jump when finger lifted */
+ if (x == 0x7F && y == 0x7F && z == 0x7F)
+ x = y = z = 0;
+
+ /* Divide 4 since trackpoint's speed is too fast */
+ input_report_rel(dev2, REL_X, (char)x / 4);
+ input_report_rel(dev2, REL_Y, -((char)y / 4));
+
+ input_report_key(dev2, BTN_LEFT, left);
+ input_report_key(dev2, BTN_RIGHT, right);
+ input_report_key(dev2, BTN_MIDDLE, middle);
+
+ input_sync(dev2);
+ return;
+ }
+
+ /* Touchpad packet */
+ x = packet[1] | ((packet[3] & 0x78) << 4);
+ y = packet[2] | ((packet[4] & 0x78) << 4);
+ z = packet[5];
+ left = packet[3] & 0x01;
+ right = packet[3] & 0x02;
+
+ if (z > 30)
+ input_report_key(dev, BTN_TOUCH, 1);
+ if (z < 25)
+ input_report_key(dev, BTN_TOUCH, 0);
+
+ if (z > 0) {
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ }
+
+ input_report_abs(dev, ABS_PRESSURE, z);
+ input_report_key(dev, BTN_TOOL_FINGER, z > 0);
+
+ /* v6 touchpad does not have middle button */
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_RIGHT, right);
+
+ input_sync(dev);
+}
+
static void alps_process_packet_v4(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
@@ -897,7 +987,7 @@
}
/* Bytes 2 - pktsize should have 0 in the highest bit */
- if (priv->proto_version != ALPS_PROTO_V5 &&
+ if ((priv->proto_version < ALPS_PROTO_V5) &&
psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
@@ -1085,6 +1175,80 @@
return ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETPOLL);
}
+static int alps_monitor_mode_send_word(struct psmouse *psmouse, u16 word)
+{
+ int i, nibble;
+
+ /*
+ * b0-b11 are valid bits, send sequence is inverse.
+ * e.g. when word = 0x0123, nibble send sequence is 3, 2, 1
+ */
+ for (i = 0; i <= 8; i += 4) {
+ nibble = (word >> i) & 0xf;
+ if (alps_command_mode_send_nibble(psmouse, nibble))
+ return -1;
+ }
+
+ return 0;
+}
+
+static int alps_monitor_mode_write_reg(struct psmouse *psmouse,
+ u16 addr, u16 value)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+ /* 0x0A0 is the command to write the word */
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE) ||
+ alps_monitor_mode_send_word(psmouse, 0x0A0) ||
+ alps_monitor_mode_send_word(psmouse, addr) ||
+ alps_monitor_mode_send_word(psmouse, value) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
+ return -1;
+
+ return 0;
+}
+
+static int alps_monitor_mode(struct psmouse *psmouse, bool enable)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+ if (enable) {
+ /* EC E9 F5 F5 E7 E6 E7 E9 to enter monitor mode */
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO))
+ return -1;
+ } else {
+ /* EC to exit monitor mode */
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP))
+ return -1;
+ }
+
+ return 0;
+}
+
+static int alps_absolute_mode_v6(struct psmouse *psmouse)
+{
+ u16 reg_val = 0x181;
+ int ret = -1;
+
+ /* enter monitor mode, to write the register */
+ if (alps_monitor_mode(psmouse, true))
+ return -1;
+
+ ret = alps_monitor_mode_write_reg(psmouse, 0x000, reg_val);
+
+ if (alps_monitor_mode(psmouse, false))
+ ret = -1;
+
+ return ret;
+}
+
static int alps_get_status(struct psmouse *psmouse, char *param)
{
/* Get status: 0xF5 0xF5 0xF5 0xE9 */
@@ -1189,6 +1353,32 @@
return 0;
}
+static int alps_hw_init_v6(struct psmouse *psmouse)
+{
+ unsigned char param[2] = {0xC8, 0x14};
+
+ /* Enter passthrough mode to let trackpoint enter 6byte raw mode */
+ if (alps_passthrough_mode_v2(psmouse, true))
+ return -1;
+
+ if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(&psmouse->ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
+ ps2_command(&psmouse->ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE))
+ return -1;
+
+ if (alps_passthrough_mode_v2(psmouse, false))
+ return -1;
+
+ if (alps_absolute_mode_v6(psmouse)) {
+ psmouse_err(psmouse, "Failed to enable absolute mode\n");
+ return -1;
+ }
+
+ return 0;
+}
+
/*
* Enable or disable passthrough mode to the trackstick.
*/
@@ -1553,6 +1743,8 @@
priv->hw_init = alps_hw_init_v1_v2;
priv->process_packet = alps_process_packet_v1_v2;
priv->set_abs_params = alps_set_abs_params_st;
+ priv->x_max = 1023;
+ priv->y_max = 767;
break;
case ALPS_PROTO_V3:
priv->hw_init = alps_hw_init_v3;
@@ -1584,6 +1776,14 @@
priv->x_bits = 23;
priv->y_bits = 12;
break;
+ case ALPS_PROTO_V6:
+ priv->hw_init = alps_hw_init_v6;
+ priv->process_packet = alps_process_packet_v6;
+ priv->set_abs_params = alps_set_abs_params_st;
+ priv->nibble_commands = alps_v6_nibble_commands;
+ priv->x_max = 2047;
+ priv->y_max = 1535;
+ break;
}
}
@@ -1705,8 +1905,8 @@
static void alps_set_abs_params_st(struct alps_data *priv,
struct input_dev *dev1)
{
- input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
- input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
+ input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
}
static void alps_set_abs_params_mt(struct alps_data *priv,
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index eee5985..704f0f9 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -17,6 +17,7 @@
#define ALPS_PROTO_V3 3
#define ALPS_PROTO_V4 4
#define ALPS_PROTO_V5 5
+#define ALPS_PROTO_V6 6
/**
* struct alps_model_info - touchpad ID table
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 8551dca..597e9b8 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1313,6 +1313,7 @@
break;
case 6:
case 7:
+ case 8:
etd->hw_version = 4;
break;
default:
diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c
index cfd1b7e..f1cb051 100644
--- a/drivers/input/touchscreen/sur40.c
+++ b/drivers/input/touchscreen/sur40.c
@@ -251,7 +251,7 @@
struct sur40_state *sur40 = polldev->private;
struct input_dev *input = polldev->input;
int result, bulk_read, need_blobs, packet_blobs, i;
- u32 packet_id;
+ u32 uninitialized_var(packet_id);
struct sur40_header *header = &sur40->bulk_in_buffer->header;
struct sur40_blob *inblob = &sur40->bulk_in_buffer->blobs[0];
@@ -286,7 +286,7 @@
if (need_blobs == -1) {
need_blobs = le16_to_cpu(header->count);
dev_dbg(sur40->dev, "need %d blobs\n", need_blobs);
- packet_id = header->packet_id;
+ packet_id = le32_to_cpu(header->packet_id);
}
/*
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index ae4b6b9..5f87bed 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -106,6 +106,7 @@
struct usbtouch_usb {
unsigned char *data;
dma_addr_t data_dma;
+ int data_size;
unsigned char *buffer;
int buf_len;
struct urb *irq;
@@ -1521,7 +1522,7 @@
static void usbtouch_free_buffers(struct usb_device *udev,
struct usbtouch_usb *usbtouch)
{
- usb_free_coherent(udev, usbtouch->type->rept_size,
+ usb_free_coherent(udev, usbtouch->data_size,
usbtouch->data, usbtouch->data_dma);
kfree(usbtouch->buffer);
}
@@ -1566,7 +1567,20 @@
if (!type->process_pkt)
type->process_pkt = usbtouch_process_pkt;
- usbtouch->data = usb_alloc_coherent(udev, type->rept_size,
+ usbtouch->data_size = type->rept_size;
+ if (type->get_pkt_len) {
+ /*
+ * When dealing with variable-length packets we should
+ * not request more than wMaxPacketSize bytes at once
+ * as we do not know if there is more data coming or
+ * we filled exactly wMaxPacketSize bytes and there is
+ * nothing else.
+ */
+ usbtouch->data_size = min(usbtouch->data_size,
+ usb_endpoint_maxp(endpoint));
+ }
+
+ usbtouch->data = usb_alloc_coherent(udev, usbtouch->data_size,
GFP_KERNEL, &usbtouch->data_dma);
if (!usbtouch->data)
goto out_free;
@@ -1626,12 +1640,12 @@
if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT)
usb_fill_int_urb(usbtouch->irq, udev,
usb_rcvintpipe(udev, endpoint->bEndpointAddress),
- usbtouch->data, type->rept_size,
+ usbtouch->data, usbtouch->data_size,
usbtouch_irq, usbtouch, endpoint->bInterval);
else
usb_fill_bulk_urb(usbtouch->irq, udev,
usb_rcvbulkpipe(udev, endpoint->bEndpointAddress),
- usbtouch->data, type->rept_size,
+ usbtouch->data, usbtouch->data_size,
usbtouch_irq, usbtouch);
usbtouch->irq->dev = udev;
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 6c0fde5..66f411a 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -109,9 +109,12 @@
#define MEI_DEV_ID_PPT_2 0x1CBA /* Panther Point */
#define MEI_DEV_ID_PPT_3 0x1DBA /* Panther Point */
-#define MEI_DEV_ID_LPT 0x8C3A /* Lynx Point */
+#define MEI_DEV_ID_LPT_H 0x8C3A /* Lynx Point H */
#define MEI_DEV_ID_LPT_W 0x8D3A /* Lynx Point - Wellsburg */
#define MEI_DEV_ID_LPT_LP 0x9C3A /* Lynx Point LP */
+#define MEI_DEV_ID_LPT_HR 0x8CBA /* Lynx Point H Refresh */
+
+#define MEI_DEV_ID_WPT_LP 0x9CBA /* Wildcat Point LP */
/*
* MEI HW Section
*/
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index b96205a..2cab3c0 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -76,9 +76,11 @@
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_1)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_2)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_3)},
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_H)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_W)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_LP)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_HR)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_WPT_LP)},
/* required last entry */
{0, }
diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c
index 8aa42e7..653799b 100644
--- a/drivers/misc/mic/card/mic_virtio.c
+++ b/drivers/misc/mic/card/mic_virtio.c
@@ -154,14 +154,14 @@
{
struct mic_vdev *mvdev = to_micvdev(vdev);
struct mic_device_ctrl __iomem *dc = mvdev->dc;
- int retry = 100, i;
+ int retry;
iowrite8(0, &dc->host_ack);
iowrite8(1, &dc->vdev_reset);
mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db);
/* Wait till host completes all card accesses and acks the reset */
- for (i = retry; i--;) {
+ for (retry = 100; retry--;) {
if (ioread8(&dc->host_ack))
break;
msleep(100);
@@ -187,11 +187,12 @@
/*
* The virtio_ring code calls this API when it wants to notify the Host.
*/
-static void mic_notify(struct virtqueue *vq)
+static bool mic_notify(struct virtqueue *vq)
{
struct mic_vdev *mvdev = vq->priv;
mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db);
+ return true;
}
static void mic_del_vq(struct virtqueue *vq, int n)
@@ -247,17 +248,17 @@
/* First assign the vring's allocated in host memory */
vqconfig = mic_vq_config(mvdev->desc) + index;
memcpy_fromio(&config, vqconfig, sizeof(config));
- _vr_size = vring_size(config.num, MIC_VIRTIO_RING_ALIGN);
+ _vr_size = vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN);
vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info));
- va = mic_card_map(mvdev->mdev, config.address, vr_size);
+ va = mic_card_map(mvdev->mdev, le64_to_cpu(config.address), vr_size);
if (!va)
return ERR_PTR(-ENOMEM);
mvdev->vr[index] = va;
memset_io(va, 0x0, _vr_size);
- vq = vring_new_virtqueue(index,
- config.num, MIC_VIRTIO_RING_ALIGN, vdev,
- false,
- va, mic_notify, callback, name);
+ vq = vring_new_virtqueue(index, le16_to_cpu(config.num),
+ MIC_VIRTIO_RING_ALIGN, vdev, false,
+ (void __force *)va, mic_notify, callback,
+ name);
if (!vq) {
err = -ENOMEM;
goto unmap;
@@ -272,7 +273,8 @@
/* Allocate and reassign used ring now */
mvdev->used_size[index] = PAGE_ALIGN(sizeof(__u16) * 3 +
- sizeof(struct vring_used_elem) * config.num);
+ sizeof(struct vring_used_elem) *
+ le16_to_cpu(config.num));
used = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
get_order(mvdev->used_size[index]));
if (!used) {
@@ -309,7 +311,7 @@
{
struct mic_vdev *mvdev = to_micvdev(vdev);
struct mic_device_ctrl __iomem *dc = mvdev->dc;
- int i, err, retry = 100;
+ int i, err, retry;
/* We must have this many virtqueues. */
if (nvqs > ioread8(&mvdev->desc->num_vq))
@@ -331,7 +333,7 @@
* rings have been re-assigned.
*/
mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db);
- for (i = retry; i--;) {
+ for (retry = 100; retry--;) {
if (!ioread8(&dc->used_address_updated))
break;
msleep(100);
@@ -519,8 +521,8 @@
struct device *dev;
int ret;
- for (i = mic_aligned_size(struct mic_bootparam);
- i < MIC_DP_SIZE; i += mic_total_desc_size(d)) {
+ for (i = sizeof(struct mic_bootparam); i < MIC_DP_SIZE;
+ i += mic_total_desc_size(d)) {
d = mdrv->dp + i;
dc = (void __iomem *)d + mic_aligned_desc_size(d);
/*
@@ -539,7 +541,8 @@
continue;
/* device already exists */
- dev = device_find_child(mdrv->dev, d, mic_match_desc);
+ dev = device_find_child(mdrv->dev, (void __force *)d,
+ mic_match_desc);
if (dev) {
if (remove)
iowrite8(MIC_VIRTIO_PARAM_DEV_REMOVE,
diff --git a/drivers/misc/mic/card/mic_virtio.h b/drivers/misc/mic/card/mic_virtio.h
index 2c5c22c..d0407ba 100644
--- a/drivers/misc/mic/card/mic_virtio.h
+++ b/drivers/misc/mic/card/mic_virtio.h
@@ -42,8 +42,8 @@
static inline unsigned mic_desc_size(struct mic_device_desc __iomem *desc)
{
- return mic_aligned_size(*desc)
- + ioread8(&desc->num_vq) * mic_aligned_size(struct mic_vqconfig)
+ return sizeof(*desc)
+ + ioread8(&desc->num_vq) * sizeof(struct mic_vqconfig)
+ ioread8(&desc->feature_len) * 2
+ ioread8(&desc->config_len);
}
@@ -67,8 +67,7 @@
}
static inline unsigned mic_total_desc_size(struct mic_device_desc __iomem *desc)
{
- return mic_aligned_desc_size(desc) +
- mic_aligned_size(struct mic_device_ctrl);
+ return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl);
}
int mic_devices_init(struct mic_driver *mdrv);
diff --git a/drivers/misc/mic/host/mic_boot.c b/drivers/misc/mic/host/mic_boot.c
index 7558d91..b75c6b5 100644
--- a/drivers/misc/mic/host/mic_boot.c
+++ b/drivers/misc/mic/host/mic_boot.c
@@ -62,7 +62,7 @@
{
struct mic_bootparam *bootparam = mdev->dp;
- bootparam->magic = MIC_MAGIC;
+ bootparam->magic = cpu_to_le32(MIC_MAGIC);
bootparam->c2h_shutdown_db = mdev->shutdown_db;
bootparam->h2c_shutdown_db = -1;
bootparam->h2c_config_db = -1;
diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c
index 5b8494b..e04bb4f 100644
--- a/drivers/misc/mic/host/mic_virtio.c
+++ b/drivers/misc/mic/host/mic_virtio.c
@@ -41,7 +41,7 @@
* We are copying from IO below an should ideally use something
* like copy_to_user_fromio(..) if it existed.
*/
- if (copy_to_user(ubuf, dbuf, len)) {
+ if (copy_to_user(ubuf, (void __force *)dbuf, len)) {
err = -EFAULT;
dev_err(mic_dev(mvdev), "%s %d err %d\n",
__func__, __LINE__, err);
@@ -66,7 +66,7 @@
* We are copying to IO below and should ideally use something
* like copy_from_user_toio(..) if it existed.
*/
- if (copy_from_user(dbuf, ubuf, len)) {
+ if (copy_from_user((void __force *)dbuf, ubuf, len)) {
err = -EFAULT;
dev_err(mic_dev(mvdev), "%s %d err %d\n",
__func__, __LINE__, err);
@@ -293,7 +293,7 @@
continue;
}
mvdev->mvr[i].vrh.vring.used =
- mvdev->mdev->aper.va +
+ (void __force *)mvdev->mdev->aper.va +
le64_to_cpu(vqconfig[i].used_address);
}
@@ -378,7 +378,7 @@
void __user *argp)
{
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
- int ret = 0, retry = 100, i;
+ int ret = 0, retry, i;
struct mic_bootparam *bootparam = mvdev->mdev->dp;
s8 db = bootparam->h2c_config_db;
@@ -401,7 +401,7 @@
mvdev->dc->config_change = MIC_VIRTIO_PARAM_CONFIG_CHANGED;
mvdev->mdev->ops->send_intr(mvdev->mdev, db);
- for (i = retry; i--;) {
+ for (retry = 100; retry--;) {
ret = wait_event_timeout(wake,
mvdev->dc->guest_ack, msecs_to_jiffies(100));
if (ret)
@@ -467,7 +467,7 @@
}
/* Find the first free device page entry */
- for (i = mic_aligned_size(struct mic_bootparam);
+ for (i = sizeof(struct mic_bootparam);
i < MIC_DP_SIZE - mic_total_desc_size(dd_config);
i += mic_total_desc_size(devp)) {
devp = mdev->dp + i;
@@ -525,6 +525,7 @@
char irqname[10];
struct mic_bootparam *bootparam = mdev->dp;
u16 num;
+ dma_addr_t vr_addr;
mutex_lock(&mdev->mic_mutex);
@@ -559,17 +560,16 @@
}
vr->len = vr_size;
vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN);
- vr->info->magic = MIC_MAGIC + mvdev->virtio_id + i;
- vqconfig[i].address = mic_map_single(mdev,
- vr->va, vr_size);
- if (mic_map_error(vqconfig[i].address)) {
+ vr->info->magic = cpu_to_le32(MIC_MAGIC + mvdev->virtio_id + i);
+ vr_addr = mic_map_single(mdev, vr->va, vr_size);
+ if (mic_map_error(vr_addr)) {
free_pages((unsigned long)vr->va, get_order(vr_size));
ret = -ENOMEM;
dev_err(mic_dev(mvdev), "%s %d err %d\n",
__func__, __LINE__, ret);
goto err;
}
- vqconfig[i].address = cpu_to_le64(vqconfig[i].address);
+ vqconfig[i].address = cpu_to_le64(vr_addr);
vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN);
ret = vringh_init_kern(&mvr->vrh,
@@ -639,7 +639,7 @@
struct mic_vdev *tmp_mvdev;
struct mic_device *mdev = mvdev->mdev;
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
- int i, ret, retry = 100;
+ int i, ret, retry;
struct mic_vqconfig *vqconfig;
struct mic_bootparam *bootparam = mdev->dp;
s8 db;
@@ -652,16 +652,16 @@
"Requesting hot remove id %d\n", mvdev->virtio_id);
mvdev->dc->config_change = MIC_VIRTIO_PARAM_DEV_REMOVE;
mdev->ops->send_intr(mdev, db);
- for (i = retry; i--;) {
+ for (retry = 100; retry--;) {
ret = wait_event_timeout(wake,
mvdev->dc->guest_ack, msecs_to_jiffies(100));
if (ret)
break;
}
dev_dbg(mdev->sdev->parent,
- "Device id %d config_change %d guest_ack %d\n",
+ "Device id %d config_change %d guest_ack %d retry %d\n",
mvdev->virtio_id, mvdev->dc->config_change,
- mvdev->dc->guest_ack);
+ mvdev->dc->guest_ack, retry);
mvdev->dc->config_change = 0;
mvdev->dc->guest_ack = 0;
skip_hot_remove:
diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c
index 81e9541..0dfa8a8 100644
--- a/drivers/misc/mic/host/mic_x100.c
+++ b/drivers/misc/mic/host/mic_x100.c
@@ -397,8 +397,8 @@
* so copy over the ramdisk @ 128M.
*/
memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size);
- iowrite32(cpu_to_le32(mdev->bootaddr << 1), &bp->hdr.ramdisk_image);
- iowrite32(cpu_to_le32(fw->size), &bp->hdr.ramdisk_size);
+ iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image);
+ iowrite32(fw->size, &bp->hdr.ramdisk_size);
release_firmware(fw);
error:
return rc;
diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c
index 1aa4a3f..56e355b 100644
--- a/drivers/staging/tidspbridge/rmgr/drv_interface.c
+++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c
@@ -258,7 +258,8 @@
/* This function maps kernel space memory to user space memory. */
static int bridge_mmap(struct file *filp, struct vm_area_struct *vma)
{
- u32 status;
+ struct omap_dsp_platform_data *pdata =
+ omap_dspbridge_dev->dev.platform_data;
/* VM_IO | VM_DONTEXPAND | VM_DONTDUMP are set by remap_pfn_range() */
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
@@ -268,13 +269,9 @@
vma->vm_start, vma->vm_end, vma->vm_page_prot,
vma->vm_flags);
- status = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
- if (status != 0)
- status = -EAGAIN;
-
- return status;
+ return vm_iomap_memory(vma,
+ pdata->phys_mempool_base,
+ pdata->phys_mempool_size);
}
static const struct file_operations bridge_fops = {
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0f74945..268b627 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -810,7 +810,8 @@
struct n_tty_data *ldata = tty->disc_data;
size_t echoed;
- if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_tail)
+ if ((!L_ECHO(tty) && !L_ECHONL(tty)) ||
+ ldata->echo_commit == ldata->echo_tail)
return;
mutex_lock(&ldata->output_lock);
@@ -825,7 +826,8 @@
{
struct n_tty_data *ldata = tty->disc_data;
- if (!L_ECHO(tty) || ldata->echo_commit == ldata->echo_head)
+ if ((!L_ECHO(tty) && !L_ECHONL(tty)) ||
+ ldata->echo_commit == ldata->echo_head)
return;
mutex_lock(&ldata->output_lock);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 3e7560f..e840431 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1515,6 +1515,8 @@
static const struct usb_device_id acm_ids[] = {
/* quirky and broken devices */
+ { USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */
+ .driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
{ USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a7c04e2..bd9dc35 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4832,8 +4832,9 @@
hub->ports[i - 1]->child;
dev_dbg(hub_dev, "warm reset port %d\n", i);
- if (!udev || !(portstatus &
- USB_PORT_STAT_CONNECTION)) {
+ if (!udev ||
+ !(portstatus & USB_PORT_STAT_CONNECTION) ||
+ udev->state == USB_STATE_NOTATTACHED) {
status = hub_port_reset(hub, i,
NULL, HUB_BH_RESET_TIME,
true);
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 95f7649..21a3520 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -459,6 +459,8 @@
dep = dwc3_wIndex_to_dep(dwc, wIndex);
if (!dep)
return -EINVAL;
+ if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
+ break;
ret = __dwc3_gadget_ep_set_halt(dep, set);
if (ret)
return -EINVAL;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 5452c0f..02e44fc 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1200,9 +1200,6 @@
else
dep->flags |= DWC3_EP_STALL;
} else {
- if (dep->flags & DWC3_EP_WEDGE)
- return 0;
-
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
DWC3_DEPCMD_CLEARSTALL, ¶ms);
if (ret)
@@ -1210,7 +1207,7 @@
value ? "set" : "clear",
dep->name);
else
- dep->flags &= ~DWC3_EP_STALL;
+ dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
}
return ret;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index a91e642..f66d96a 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -682,6 +682,7 @@
config USB_CONFIGFS_MASS_STORAGE
boolean "Mass storage"
depends on USB_CONFIGFS
+ depends on BLOCK
select USB_F_MASS_STORAGE
help
The Mass Storage Gadget acts as a USB Mass Storage disk drive.
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 3e7ae70..2018ba1 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -593,6 +593,7 @@
bitmap_zero(f->endpoints, 32);
}
cdev->config = NULL;
+ cdev->delayed_status = 0;
}
static int set_config(struct usb_composite_dev *cdev,
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 774e8b8..241fc87 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1304,7 +1304,7 @@
{
struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL);
if (unlikely(!ffs))
- return 0;
+ return NULL;
ENTER();
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index a03ba2c..b963939 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -523,7 +523,7 @@
*/
DBG(fsg, "bulk reset request\n");
raise_exception(fsg->common, FSG_STATE_RESET);
- return DELAYED_STATUS;
+ return USB_GADGET_DELAYED_STATUS;
case US_BULK_GET_MAX_LUN:
if (ctrl->bRequestType !=
@@ -602,13 +602,14 @@
return true;
}
-static int sleep_thread(struct fsg_common *common)
+static int sleep_thread(struct fsg_common *common, bool can_freeze)
{
int rc = 0;
/* Wait until a signal arrives or we are woken up */
for (;;) {
- try_to_freeze();
+ if (can_freeze)
+ try_to_freeze();
set_current_state(TASK_INTERRUPTIBLE);
if (signal_pending(current)) {
rc = -EINTR;
@@ -682,7 +683,7 @@
/* Wait for the next buffer to become available */
bh = common->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
- rc = sleep_thread(common);
+ rc = sleep_thread(common, false);
if (rc)
return rc;
}
@@ -937,7 +938,7 @@
}
/* Wait for something to happen */
- rc = sleep_thread(common);
+ rc = sleep_thread(common, false);
if (rc)
return rc;
}
@@ -1504,7 +1505,7 @@
}
/* Otherwise wait for something to happen */
- rc = sleep_thread(common);
+ rc = sleep_thread(common, true);
if (rc)
return rc;
}
@@ -1625,7 +1626,7 @@
/* Wait for the next buffer to become available */
bh = common->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
- rc = sleep_thread(common);
+ rc = sleep_thread(common, true);
if (rc)
return rc;
}
@@ -1828,7 +1829,7 @@
bh = common->next_buffhd_to_fill;
common->next_buffhd_to_drain = bh;
while (bh->state != BUF_STATE_EMPTY) {
- rc = sleep_thread(common);
+ rc = sleep_thread(common, true);
if (rc)
return rc;
}
@@ -2174,7 +2175,7 @@
/* Wait for the next buffer to become available */
bh = common->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
- rc = sleep_thread(common);
+ rc = sleep_thread(common, true);
if (rc)
return rc;
}
@@ -2193,7 +2194,7 @@
/* Wait for the CBW to arrive */
while (bh->state != BUF_STATE_FULL) {
- rc = sleep_thread(common);
+ rc = sleep_thread(common, true);
if (rc)
return rc;
}
@@ -2379,7 +2380,7 @@
}
if (num_active == 0)
break;
- if (sleep_thread(common))
+ if (sleep_thread(common, true))
return;
}
@@ -2516,7 +2517,7 @@
}
if (!common->running) {
- sleep_thread(common);
+ sleep_thread(common, true);
continue;
}
@@ -3111,7 +3112,7 @@
fsg->common->can_stall);
if (ret)
return ret;
- fsg_common_set_inquiry_string(fsg->common, 0, 0);
+ fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
ret = fsg_common_run_thread(fsg->common);
if (ret)
return ret;
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 0ac6064..409a3c4 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -54,6 +54,7 @@
*/
#ifdef CONFIG_ARCH_PXA
#include <mach/pxa25x-udc.h>
+#include <mach/hardware.h>
#endif
#ifdef CONFIG_ARCH_LUBBOCK
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 9875d9c..e20bc10 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -1180,6 +1180,7 @@
}
static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
+static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg);
/**
* s3c_hsotg_process_control - process a control request
@@ -1221,6 +1222,7 @@
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
switch (ctrl->bRequest) {
case USB_REQ_SET_ADDRESS:
+ s3c_hsotg_disconnect(hsotg);
dcfg = readl(hsotg->regs + DCFG);
dcfg &= ~DCFG_DevAddr_MASK;
dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT;
@@ -1245,7 +1247,9 @@
/* as a fallback, try delivering it to the driver to deal with */
if (ret == 0 && hsotg->driver) {
+ spin_unlock(&hsotg->lock);
ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
+ spin_lock(&hsotg->lock);
if (ret < 0)
dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
}
@@ -1308,10 +1312,12 @@
return;
}
+ spin_lock(&hsotg->lock);
if (req->actual == 0)
s3c_hsotg_enqueue_setup(hsotg);
else
s3c_hsotg_process_control(hsotg, req->buf);
+ spin_unlock(&hsotg->lock);
}
/**
@@ -2533,7 +2539,6 @@
writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS);
call_gadget(hsotg, suspend);
- s3c_hsotg_disconnect(hsotg);
}
if (gintsts & GINTSTS_WkUpInt) {
diff --git a/drivers/usb/gadget/storage_common.h b/drivers/usb/gadget/storage_common.h
index c74c2fd..70c8914 100644
--- a/drivers/usb/gadget/storage_common.h
+++ b/drivers/usb/gadget/storage_common.h
@@ -119,10 +119,6 @@
return curlun->filp != NULL;
}
-/* Big enough to hold our biggest descriptor */
-#define EP0_BUFSIZE 256
-#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */
-
/* Default size of buffer length. */
#define FSG_BUFLEN ((u32)16384)
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 6c3d795..0f8aad7 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -370,7 +370,7 @@
return -ENOMEM;
}
-void bot_cleanup_old_alt(struct f_uas *fu)
+static void bot_cleanup_old_alt(struct f_uas *fu)
{
if (!(fu->flags & USBG_ENABLED))
return;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 0dd07ae..f49b0b6 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -91,17 +91,17 @@
* functional coverage for the "USBCV" test harness from USB-IF.
* It's always set if OTG mode is enabled.
*/
-unsigned autoresume = DEFAULT_AUTORESUME;
+static unsigned autoresume = DEFAULT_AUTORESUME;
module_param(autoresume, uint, S_IRUGO);
MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
/* Maximum Autoresume time */
-unsigned max_autoresume;
+static unsigned max_autoresume;
module_param(max_autoresume, uint, S_IRUGO);
MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup");
/* Interval between two remote wakeups */
-unsigned autoresume_interval_ms;
+static unsigned autoresume_interval_ms;
module_param(autoresume_interval_ms, uint, S_IRUGO);
MODULE_PARM_DESC(autoresume_interval_ms,
"milliseconds to increase successive wakeup delays");
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index e89ac4d..9b7435f 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/device.h>
+#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1e2f3f4..53c2e29 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2973,8 +2973,58 @@
}
while (1) {
- if (room_on_ring(xhci, ep_ring, num_trbs))
- break;
+ if (room_on_ring(xhci, ep_ring, num_trbs)) {
+ union xhci_trb *trb = ep_ring->enqueue;
+ unsigned int usable = ep_ring->enq_seg->trbs +
+ TRBS_PER_SEGMENT - 1 - trb;
+ u32 nop_cmd;
+
+ /*
+ * Section 4.11.7.1 TD Fragments states that a link
+ * TRB must only occur at the boundary between
+ * data bursts (eg 512 bytes for 480M).
+ * While it is possible to split a large fragment
+ * we don't know the size yet.
+ * Simplest solution is to fill the trb before the
+ * LINK with nop commands.
+ */
+ if (num_trbs == 1 || num_trbs <= usable || usable == 0)
+ break;
+
+ if (ep_ring->type != TYPE_BULK)
+ /*
+ * While isoc transfers might have a buffer that
+ * crosses a 64k boundary it is unlikely.
+ * Since we can't add NOPs without generating
+ * gaps in the traffic just hope it never
+ * happens at the end of the ring.
+ * This could be fixed by writing a LINK TRB
+ * instead of the first NOP - however the
+ * TRB_TYPE_LINK_LE32() calls would all need
+ * changing to check the ring length.
+ */
+ break;
+
+ if (num_trbs >= TRBS_PER_SEGMENT) {
+ xhci_err(xhci, "Too many fragments %d, max %d\n",
+ num_trbs, TRBS_PER_SEGMENT - 1);
+ return -ENOMEM;
+ }
+
+ nop_cmd = cpu_to_le32(TRB_TYPE(TRB_TR_NOOP) |
+ ep_ring->cycle_state);
+ ep_ring->num_trbs_free -= usable;
+ do {
+ trb->generic.field[0] = 0;
+ trb->generic.field[1] = 0;
+ trb->generic.field[2] = 0;
+ trb->generic.field[3] = nop_cmd;
+ trb++;
+ } while (--usable);
+ ep_ring->enqueue = trb;
+ if (room_on_ring(xhci, ep_ring, num_trbs))
+ break;
+ }
if (ep_ring == xhci->cmd_ring) {
xhci_err(xhci, "Do not support expand command ring\n");
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 0a43329..4d4499b 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1809,7 +1809,6 @@
disable_irq_wake(musb->nIrq);
free_irq(musb->nIrq, musb);
}
- cancel_work_sync(&musb->irq_work);
musb_host_free(musb);
}
@@ -1896,6 +1895,9 @@
musb_platform_disable(musb);
musb_generic_disable(musb);
+ /* Init IRQ workqueue before request_irq */
+ INIT_WORK(&musb->irq_work, musb_irq_work);
+
/* setup musb parts of the core (especially endpoints) */
status = musb_core_init(plat->config->multipoint
? MUSB_CONTROLLER_MHDRC
@@ -1905,9 +1907,6 @@
setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
- /* Init IRQ workqueue before request_irq */
- INIT_WORK(&musb->irq_work, musb_irq_work);
-
/* attach to the IRQ */
if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
dev_err(dev, "request_irq %d failed!\n", nIrq);
@@ -1981,6 +1980,7 @@
musb_host_cleanup(musb);
fail3:
+ cancel_work_sync(&musb->irq_work);
if (musb->dma_controller)
dma_controller_destroy(musb->dma_controller);
fail2_5:
@@ -2043,6 +2043,7 @@
if (musb->dma_controller)
dma_controller_destroy(musb->dma_controller);
+ cancel_work_sync(&musb->irq_work);
musb_free(musb);
device_init_wakeup(dev, 0);
return 0;
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index ff9d6de..a12bd30 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -38,6 +38,7 @@
u32 prog_len;
u32 transferred;
u32 packet_sz;
+ struct list_head tx_check;
};
#define MUSB_DMA_NUM_CHANNELS 15
@@ -47,6 +48,8 @@
struct cppi41_dma_channel rx_channel[MUSB_DMA_NUM_CHANNELS];
struct cppi41_dma_channel tx_channel[MUSB_DMA_NUM_CHANNELS];
struct musb *musb;
+ struct hrtimer early_tx;
+ struct list_head early_tx_list;
u32 rx_mode;
u32 tx_mode;
u32 auto_req;
@@ -96,31 +99,27 @@
cppi41_channel->usb_toggle = toggle;
}
-static void cppi41_dma_callback(void *private_data)
+static bool musb_is_tx_fifo_empty(struct musb_hw_ep *hw_ep)
{
- struct dma_channel *channel = private_data;
- struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+ u8 epnum = hw_ep->epnum;
+ struct musb *musb = hw_ep->musb;
+ void __iomem *epio = musb->endpoints[epnum].regs;
+ u16 csr;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (csr & MUSB_TXCSR_TXPKTRDY)
+ return false;
+ return true;
+}
+
+static void cppi41_dma_callback(void *private_data);
+
+static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel)
+{
struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
struct musb *musb = hw_ep->musb;
- unsigned long flags;
- struct dma_tx_state txstate;
- u32 transferred;
- spin_lock_irqsave(&musb->lock, flags);
-
- dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
- &txstate);
- transferred = cppi41_channel->prog_len - txstate.residue;
- cppi41_channel->transferred += transferred;
-
- dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n",
- hw_ep->epnum, cppi41_channel->transferred,
- cppi41_channel->total_len);
-
- update_rx_toggle(cppi41_channel);
-
- if (cppi41_channel->transferred == cppi41_channel->total_len ||
- transferred < cppi41_channel->packet_sz) {
+ if (!cppi41_channel->prog_len) {
/* done, complete */
cppi41_channel->channel.actual_len =
@@ -150,13 +149,11 @@
remain_bytes,
direction,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (WARN_ON(!dma_desc)) {
- spin_unlock_irqrestore(&musb->lock, flags);
+ if (WARN_ON(!dma_desc))
return;
- }
dma_desc->callback = cppi41_dma_callback;
- dma_desc->callback_param = channel;
+ dma_desc->callback_param = &cppi41_channel->channel;
cppi41_channel->cookie = dma_desc->tx_submit(dma_desc);
dma_async_issue_pending(dc);
@@ -166,6 +163,117 @@
musb_writew(epio, MUSB_RXCSR, csr);
}
}
+}
+
+static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer)
+{
+ struct cppi41_dma_controller *controller;
+ struct cppi41_dma_channel *cppi41_channel, *n;
+ struct musb *musb;
+ unsigned long flags;
+ enum hrtimer_restart ret = HRTIMER_NORESTART;
+
+ controller = container_of(timer, struct cppi41_dma_controller,
+ early_tx);
+ musb = controller->musb;
+
+ spin_lock_irqsave(&musb->lock, flags);
+ list_for_each_entry_safe(cppi41_channel, n, &controller->early_tx_list,
+ tx_check) {
+ bool empty;
+ struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+
+ empty = musb_is_tx_fifo_empty(hw_ep);
+ if (empty) {
+ list_del_init(&cppi41_channel->tx_check);
+ cppi41_trans_done(cppi41_channel);
+ }
+ }
+
+ if (!list_empty(&controller->early_tx_list)) {
+ ret = HRTIMER_RESTART;
+ hrtimer_forward_now(&controller->early_tx,
+ ktime_set(0, 150 * NSEC_PER_USEC));
+ }
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+ return ret;
+}
+
+static void cppi41_dma_callback(void *private_data)
+{
+ struct dma_channel *channel = private_data;
+ struct cppi41_dma_channel *cppi41_channel = channel->private_data;
+ struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+ struct musb *musb = hw_ep->musb;
+ unsigned long flags;
+ struct dma_tx_state txstate;
+ u32 transferred;
+ bool empty;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
+ &txstate);
+ transferred = cppi41_channel->prog_len - txstate.residue;
+ cppi41_channel->transferred += transferred;
+
+ dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n",
+ hw_ep->epnum, cppi41_channel->transferred,
+ cppi41_channel->total_len);
+
+ update_rx_toggle(cppi41_channel);
+
+ if (cppi41_channel->transferred == cppi41_channel->total_len ||
+ transferred < cppi41_channel->packet_sz)
+ cppi41_channel->prog_len = 0;
+
+ empty = musb_is_tx_fifo_empty(hw_ep);
+ if (empty) {
+ cppi41_trans_done(cppi41_channel);
+ } else {
+ struct cppi41_dma_controller *controller;
+ /*
+ * On AM335x it has been observed that the TX interrupt fires
+ * too early that means the TXFIFO is not yet empty but the DMA
+ * engine says that it is done with the transfer. We don't
+ * receive a FIFO empty interrupt so the only thing we can do is
+ * to poll for the bit. On HS it usually takes 2us, on FS around
+ * 110us - 150us depending on the transfer size.
+ * We spin on HS (no longer than than 25us and setup a timer on
+ * FS to check for the bit and complete the transfer.
+ */
+ controller = cppi41_channel->controller;
+
+ if (musb->g.speed == USB_SPEED_HIGH) {
+ unsigned wait = 25;
+
+ do {
+ empty = musb_is_tx_fifo_empty(hw_ep);
+ if (empty)
+ break;
+ wait--;
+ if (!wait)
+ break;
+ udelay(1);
+ } while (1);
+
+ empty = musb_is_tx_fifo_empty(hw_ep);
+ if (empty) {
+ cppi41_trans_done(cppi41_channel);
+ goto out;
+ }
+ }
+ list_add_tail(&cppi41_channel->tx_check,
+ &controller->early_tx_list);
+ if (!hrtimer_active(&controller->early_tx)) {
+ hrtimer_start_range_ns(&controller->early_tx,
+ ktime_set(0, 140 * NSEC_PER_USEC),
+ 40 * NSEC_PER_USEC,
+ HRTIMER_MODE_REL);
+ }
+ }
+out:
spin_unlock_irqrestore(&musb->lock, flags);
}
@@ -364,6 +472,8 @@
WARN_ON(1);
return 1;
}
+ if (cppi41_channel->hw_ep->ep_in.type != USB_ENDPOINT_XFER_BULK)
+ return 0;
if (cppi41_channel->is_tx)
return 1;
/* AM335x Advisory 1.0.13. No workaround for device RX mode */
@@ -388,6 +498,7 @@
if (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)
return 0;
+ list_del_init(&cppi41_channel->tx_check);
if (is_tx) {
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~MUSB_TXCSR_DMAENAB;
@@ -495,6 +606,7 @@
cppi41_channel->controller = controller;
cppi41_channel->port_num = port;
cppi41_channel->is_tx = is_tx;
+ INIT_LIST_HEAD(&cppi41_channel->tx_check);
musb_dma = &cppi41_channel->channel;
musb_dma->private_data = cppi41_channel;
@@ -520,6 +632,7 @@
struct cppi41_dma_controller *controller = container_of(c,
struct cppi41_dma_controller, controller);
+ hrtimer_cancel(&controller->early_tx);
cppi41_dma_controller_stop(controller);
kfree(controller);
}
@@ -539,6 +652,9 @@
if (!controller)
goto kzalloc_fail;
+ hrtimer_init(&controller->early_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ controller->early_tx.function = cppi41_recheck_tx_req;
+ INIT_LIST_HEAD(&controller->early_tx_list);
controller->musb = musb;
controller->controller.channel_alloc = cppi41_dma_channel_allocate;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d2d3a17..32fb057c 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1796,7 +1796,11 @@
/* this "gadget" abstracts/virtualizes the controller */
musb->g.name = musb_driver_name;
+#if IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE)
musb->g.is_otg = 1;
+#elif IS_ENABLED(CONFIG_USB_MUSB_GADGET)
+ musb->g.is_otg = 0;
+#endif
musb_g_init_endpoints(musb);
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index 6370e50..0e3c60cb 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -52,8 +52,7 @@
return am_phy->id;
}
- ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen,
- USB_PHY_TYPE_USB2, 0, false);
+ ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
if (ret)
return ret;
@@ -66,8 +65,6 @@
platform_set_drvdata(pdev, am_phy);
return 0;
-
- return ret;
}
static int am335x_phy_remove(struct platform_device *pdev)
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index fce3a9e..aa6d37b 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -48,8 +48,9 @@
if (pd)
return;
pd = platform_device_register_simple("usb_phy_gen_xceiv", -1, NULL, 0);
- if (!pd) {
+ if (IS_ERR(pd)) {
pr_err("Unable to register generic usb transceiver\n");
+ pd = NULL;
return;
}
}
@@ -150,10 +151,40 @@
}
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
- enum usb_phy_type type, u32 clk_rate, bool needs_vcc)
+ struct usb_phy_gen_xceiv_platform_data *pdata)
{
+ enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err;
+ u32 clk_rate = 0;
+ bool needs_vcc = false;
+
+ nop->reset_active_low = true; /* default behaviour */
+
+ if (dev->of_node) {
+ struct device_node *node = dev->of_node;
+ enum of_gpio_flags flags = 0;
+
+ if (of_property_read_u32(node, "clock-frequency", &clk_rate))
+ clk_rate = 0;
+
+ needs_vcc = of_property_read_bool(node, "vcc-supply");
+ nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
+ 0, &flags);
+ if (nop->gpio_reset == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+ } else if (pdata) {
+ type = pdata->type;
+ clk_rate = pdata->clk_rate;
+ needs_vcc = pdata->needs_vcc;
+ nop->gpio_reset = pdata->gpio_reset;
+ } else {
+ nop->gpio_reset = -1;
+ }
+
nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
GFP_KERNEL);
if (!nop->phy.otg)
@@ -218,43 +249,14 @@
static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct usb_phy_gen_xceiv_platform_data *pdata =
- dev_get_platdata(&pdev->dev);
struct usb_phy_gen_xceiv *nop;
- enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err;
- u32 clk_rate = 0;
- bool needs_vcc = false;
nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
if (!nop)
return -ENOMEM;
- nop->reset_active_low = true; /* default behaviour */
-
- if (dev->of_node) {
- struct device_node *node = dev->of_node;
- enum of_gpio_flags flags;
-
- if (of_property_read_u32(node, "clock-frequency", &clk_rate))
- clk_rate = 0;
-
- needs_vcc = of_property_read_bool(node, "vcc-supply");
- nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
- 0, &flags);
- if (nop->gpio_reset == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
- nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
-
- } else if (pdata) {
- type = pdata->type;
- clk_rate = pdata->clk_rate;
- needs_vcc = pdata->needs_vcc;
- nop->gpio_reset = pdata->gpio_reset;
- }
-
- err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc);
+ err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
if (err)
return err;
@@ -271,8 +273,6 @@
platform_set_drvdata(pdev, nop);
return 0;
-
- return err;
}
static int usb_phy_gen_xceiv_remove(struct platform_device *pdev)
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
index d2a220d..38a81f3 100644
--- a/drivers/usb/phy/phy-generic.h
+++ b/drivers/usb/phy/phy-generic.h
@@ -1,6 +1,8 @@
#ifndef _PHY_GENERIC_H_
#define _PHY_GENERIC_H_
+#include <linux/usb/usb_phy_gen_xceiv.h>
+
struct usb_phy_gen_xceiv {
struct usb_phy phy;
struct device *dev;
@@ -14,6 +16,6 @@
void usb_gen_phy_shutdown(struct usb_phy *phy);
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
- enum usb_phy_type type, u32 clk_rate, bool needs_vcc);
+ struct usb_phy_gen_xceiv_platform_data *pdata);
#endif
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index fdd33b4..545844b 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -164,7 +164,7 @@
mxs_phy->clk = clk;
- platform_set_drvdata(pdev, &mxs_phy->phy);
+ platform_set_drvdata(pdev, mxs_phy);
ret = usb_add_phy_dev(&mxs_phy->phy);
if (ret)
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c
index a99a695..db3ab34 100644
--- a/drivers/usb/phy/phy-rcar-gen2-usb.c
+++ b/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -107,10 +107,10 @@
clk_prepare_enable(priv->clk);
/* Set USB channels in the USBHS UGCTRL2 register */
- val = ioread32(priv->base);
+ val = ioread32(priv->base + USBHS_UGCTRL2_REG);
val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS);
val |= priv->ugctrl2;
- iowrite32(val, priv->base);
+ iowrite32(val, priv->base + USBHS_UGCTRL2_REG);
}
/* Shutdown USB channels */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9ced893..fb0d5374 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2123,6 +2123,20 @@
termios->c_cflag |= CRTSCTS;
}
+ /*
+ * All FTDI UART chips are limited to CS7/8. We won't pretend to
+ * support CS5/6 and revert the CSIZE setting instead.
+ */
+ if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) {
+ dev_warn(ddev, "requested CSIZE setting not supported\n");
+
+ termios->c_cflag &= ~CSIZE;
+ if (old_termios)
+ termios->c_cflag |= old_termios->c_cflag & CSIZE;
+ else
+ termios->c_cflag |= CS8;
+ }
+
cflag = termios->c_cflag;
if (!old_termios)
@@ -2159,19 +2173,16 @@
} else {
urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
}
- if (cflag & CSIZE) {
- switch (cflag & CSIZE) {
- case CS7:
- urb_value |= 7;
- dev_dbg(ddev, "Setting CS7\n");
- break;
- case CS8:
- urb_value |= 8;
- dev_dbg(ddev, "Setting CS8\n");
- break;
- default:
- dev_err(ddev, "CSIZE was set but not CS7-CS8\n");
- }
+ switch (cflag & CSIZE) {
+ case CS7:
+ urb_value |= 7;
+ dev_dbg(ddev, "Setting CS7\n");
+ break;
+ default:
+ case CS8:
+ urb_value |= 8;
+ dev_dbg(ddev, "Setting CS8\n");
+ break;
}
/* This is needed by the break command since it uses the same command
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 2b01ec8..b63ce02 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -173,16 +173,8 @@
clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
return result;
}
- /*
- * Try sending off another urb, unless called from completion handler
- * (in which case there will be no free urb or no data).
- */
- if (mem_flags != GFP_ATOMIC)
- goto retry;
- clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
-
- return 0;
+ goto retry; /* try sending off another urb */
}
EXPORT_SYMBOL_GPL(usb_serial_generic_write_start);
@@ -208,7 +200,7 @@
return 0;
count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
- result = usb_serial_generic_write_start(port, GFP_KERNEL);
+ result = usb_serial_generic_write_start(port, GFP_ATOMIC);
if (result)
return result;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index e5bdd98..a69da83 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1813,25 +1813,25 @@
iflag = tty->termios.c_iflag;
/* Change the number of bits */
- if (cflag & CSIZE) {
- switch (cflag & CSIZE) {
- case CS5:
- lData = LCR_BITS_5;
- break;
+ switch (cflag & CSIZE) {
+ case CS5:
+ lData = LCR_BITS_5;
+ break;
- case CS6:
- lData = LCR_BITS_6;
- break;
+ case CS6:
+ lData = LCR_BITS_6;
+ break;
- case CS7:
- lData = LCR_BITS_7;
- break;
- default:
- case CS8:
- lData = LCR_BITS_8;
- break;
- }
+ case CS7:
+ lData = LCR_BITS_7;
+ break;
+
+ default:
+ case CS8:
+ lData = LCR_BITS_8;
+ break;
}
+
/* Change the Parity bit */
if (cflag & PARENB) {
if (cflag & PARODD) {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c3d9485..496b7e39 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -85,6 +85,7 @@
#define HUAWEI_PRODUCT_K4505 0x1464
#define HUAWEI_PRODUCT_K3765 0x1465
#define HUAWEI_PRODUCT_K4605 0x14C6
+#define HUAWEI_PRODUCT_E173S6 0x1C07
#define QUANTA_VENDOR_ID 0x0408
#define QUANTA_PRODUCT_Q101 0xEA02
@@ -572,6 +573,8 @@
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S6, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) },
@@ -634,6 +637,10 @@
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x72) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x73) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x74) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) },
@@ -688,6 +695,10 @@
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x72) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x73) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x74) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) },
@@ -742,6 +753,10 @@
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x72) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x73) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x74) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7A) },
@@ -796,6 +811,10 @@
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x72) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x73) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x74) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7A) },
@@ -850,6 +869,10 @@
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x72) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x73) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x74) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7A) },
@@ -904,6 +927,10 @@
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x72) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x73) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x74) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7A) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1e6de4c..1e3318d 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -361,23 +361,21 @@
0, 0, buf, 7, 100);
dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf);
- if (C_CSIZE(tty)) {
- switch (C_CSIZE(tty)) {
- case CS5:
- buf[6] = 5;
- break;
- case CS6:
- buf[6] = 6;
- break;
- case CS7:
- buf[6] = 7;
- break;
- default:
- case CS8:
- buf[6] = 8;
- }
- dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ buf[6] = 5;
+ break;
+ case CS6:
+ buf[6] = 6;
+ break;
+ case CS7:
+ buf[6] = 7;
+ break;
+ default:
+ case CS8:
+ buf[6] = 8;
}
+ dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
/* For reference buf[0]:buf[3] baud rate value */
pl2303_encode_baudrate(tty, port, &buf[0]);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 4abac28..5b793c3 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -348,22 +348,20 @@
}
/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
- if (cflag & CSIZE) {
- switch (cflag & CSIZE) {
- case CS5:
- buf[1] |= SET_UART_FORMAT_SIZE_5;
- break;
- case CS6:
- buf[1] |= SET_UART_FORMAT_SIZE_6;
- break;
- case CS7:
- buf[1] |= SET_UART_FORMAT_SIZE_7;
- break;
- default:
- case CS8:
- buf[1] |= SET_UART_FORMAT_SIZE_8;
- break;
- }
+ switch (cflag & CSIZE) {
+ case CS5:
+ buf[1] |= SET_UART_FORMAT_SIZE_5;
+ break;
+ case CS6:
+ buf[1] |= SET_UART_FORMAT_SIZE_6;
+ break;
+ case CS7:
+ buf[1] |= SET_UART_FORMAT_SIZE_7;
+ break;
+ default:
+ case CS8:
+ buf[1] |= SET_UART_FORMAT_SIZE_8;
+ break;
}
/* Set Stop bit2 : 0:1bit 1:2bit */
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index e538b72..f14e792 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -97,18 +97,12 @@
static void wusb_dev_free(struct wusb_dev *wusb_dev)
{
- if (wusb_dev) {
- kfree(wusb_dev->set_gtk_req);
- usb_free_urb(wusb_dev->set_gtk_urb);
- kfree(wusb_dev);
- }
+ kfree(wusb_dev);
}
static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc)
{
struct wusb_dev *wusb_dev;
- struct urb *urb;
- struct usb_ctrlrequest *req;
wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL);
if (wusb_dev == NULL)
@@ -118,22 +112,6 @@
INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work);
- urb = usb_alloc_urb(0, GFP_KERNEL);
- if (urb == NULL)
- goto err;
- wusb_dev->set_gtk_urb = urb;
-
- req = kmalloc(sizeof(*req), GFP_KERNEL);
- if (req == NULL)
- goto err;
- wusb_dev->set_gtk_req = req;
-
- req->bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
- req->bRequest = USB_REQ_SET_DESCRIPTOR;
- req->wValue = cpu_to_le16(USB_DT_KEY << 8 | wusbhc->gtk_index);
- req->wIndex = 0;
- req->wLength = cpu_to_le16(wusbhc->gtk.descr.bLength);
-
return wusb_dev;
err:
wusb_dev_free(wusb_dev);
@@ -411,9 +389,6 @@
/*
* Refresh the list of keep alives to emit in the MMC
*
- * Some devices don't respond to keep alives unless they've been
- * authenticated, so skip unauthenticated devices.
- *
* We only publish the first four devices that have a coming timeout
* condition. Then when we are done processing those, we go for the
* next ones. We ignore the ones that have timed out already (they'll
@@ -448,7 +423,7 @@
if (wusb_dev == NULL)
continue;
- if (wusb_dev->usb_dev == NULL || !wusb_dev->usb_dev->authenticated)
+ if (wusb_dev->usb_dev == NULL)
continue;
if (time_after(jiffies, wusb_dev->entry_ts + tt)) {
@@ -524,11 +499,19 @@
*
* @wusbhc shall be referenced and unlocked
*/
-static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, u8 srcaddr)
{
+ struct wusb_dev *wusb_dev;
+
mutex_lock(&wusbhc->mutex);
- wusb_dev->entry_ts = jiffies;
- __wusbhc_keep_alive(wusbhc);
+ wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
+ if (wusb_dev == NULL) {
+ dev_dbg(wusbhc->dev, "ignoring DN_Alive from unconnected device %02x\n",
+ srcaddr);
+ } else {
+ wusb_dev->entry_ts = jiffies;
+ __wusbhc_keep_alive(wusbhc);
+ }
mutex_unlock(&wusbhc->mutex);
}
@@ -582,14 +565,22 @@
*
* @wusbhc shall be referenced and unlocked
*/
-static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, u8 srcaddr)
{
struct device *dev = wusbhc->dev;
-
- dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n", wusb_dev->addr);
+ struct wusb_dev *wusb_dev;
mutex_lock(&wusbhc->mutex);
- __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, wusb_dev->port_idx));
+ wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
+ if (wusb_dev == NULL) {
+ dev_dbg(dev, "ignoring DN DISCONNECT from unconnected device %02x\n",
+ srcaddr);
+ } else {
+ dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n",
+ wusb_dev->addr);
+ __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc,
+ wusb_dev->port_idx));
+ }
mutex_unlock(&wusbhc->mutex);
}
@@ -611,30 +602,21 @@
struct wusb_dn_hdr *dn_hdr, size_t size)
{
struct device *dev = wusbhc->dev;
- struct wusb_dev *wusb_dev;
if (size < sizeof(struct wusb_dn_hdr)) {
dev_err(dev, "DN data shorter than DN header (%d < %d)\n",
(int)size, (int)sizeof(struct wusb_dn_hdr));
return;
}
-
- wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
- if (wusb_dev == NULL && dn_hdr->bType != WUSB_DN_CONNECT) {
- dev_dbg(dev, "ignoring DN %d from unconnected device %02x\n",
- dn_hdr->bType, srcaddr);
- return;
- }
-
switch (dn_hdr->bType) {
case WUSB_DN_CONNECT:
wusbhc_handle_dn_connect(wusbhc, dn_hdr, size);
break;
case WUSB_DN_ALIVE:
- wusbhc_handle_dn_alive(wusbhc, wusb_dev);
+ wusbhc_handle_dn_alive(wusbhc, srcaddr);
break;
case WUSB_DN_DISCONNECT:
- wusbhc_handle_dn_disconnect(wusbhc, wusb_dev);
+ wusbhc_handle_dn_disconnect(wusbhc, srcaddr);
break;
case WUSB_DN_MASAVAILCHANGED:
case WUSB_DN_RWAKE:
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
index dd88441..4c40d0d 100644
--- a/drivers/usb/wusbcore/security.c
+++ b/drivers/usb/wusbcore/security.c
@@ -29,19 +29,16 @@
#include <linux/export.h>
#include "wusbhc.h"
-static void wusbhc_set_gtk_callback(struct urb *urb);
-static void wusbhc_gtk_rekey_done_work(struct work_struct *work);
+static void wusbhc_gtk_rekey_work(struct work_struct *work);
int wusbhc_sec_create(struct wusbhc *wusbhc)
{
wusbhc->gtk.descr.bLength = sizeof(wusbhc->gtk.descr) + sizeof(wusbhc->gtk.data);
wusbhc->gtk.descr.bDescriptorType = USB_DT_KEY;
wusbhc->gtk.descr.bReserved = 0;
+ wusbhc->gtk_index = 0;
- wusbhc->gtk_index = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK,
- WUSB_KEY_INDEX_ORIGINATOR_HOST);
-
- INIT_WORK(&wusbhc->gtk_rekey_done_work, wusbhc_gtk_rekey_done_work);
+ INIT_WORK(&wusbhc->gtk_rekey_work, wusbhc_gtk_rekey_work);
return 0;
}
@@ -113,7 +110,7 @@
wusbhc_generate_gtk(wusbhc);
result = wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid,
- &wusbhc->gtk.descr.bKeyData, key_size);
+ &wusbhc->gtk.descr.bKeyData, key_size);
if (result < 0)
dev_err(wusbhc->dev, "cannot set GTK for the host: %d\n",
result);
@@ -129,7 +126,7 @@
*/
void wusbhc_sec_stop(struct wusbhc *wusbhc)
{
- cancel_work_sync(&wusbhc->gtk_rekey_done_work);
+ cancel_work_sync(&wusbhc->gtk_rekey_work);
}
@@ -185,12 +182,14 @@
static int wusb_dev_set_gtk(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
{
struct usb_device *usb_dev = wusb_dev->usb_dev;
+ u8 key_index = wusb_key_index(wusbhc->gtk_index,
+ WUSB_KEY_INDEX_TYPE_GTK, WUSB_KEY_INDEX_ORIGINATOR_HOST);
return usb_control_msg(
usb_dev, usb_sndctrlpipe(usb_dev, 0),
USB_REQ_SET_DESCRIPTOR,
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- USB_DT_KEY << 8 | wusbhc->gtk_index, 0,
+ USB_DT_KEY << 8 | key_index, 0,
&wusbhc->gtk.descr, wusbhc->gtk.descr.bLength,
1000);
}
@@ -520,24 +519,55 @@
* Once all connected and authenticated devices have received the new
* GTK, switch the host to using it.
*/
-static void wusbhc_gtk_rekey_done_work(struct work_struct *work)
+static void wusbhc_gtk_rekey_work(struct work_struct *work)
{
- struct wusbhc *wusbhc = container_of(work, struct wusbhc, gtk_rekey_done_work);
+ struct wusbhc *wusbhc = container_of(work,
+ struct wusbhc, gtk_rekey_work);
size_t key_size = sizeof(wusbhc->gtk.data);
+ int port_idx;
+ struct wusb_dev *wusb_dev, *wusb_dev_next;
+ LIST_HEAD(rekey_list);
mutex_lock(&wusbhc->mutex);
+ /* generate the new key */
+ wusbhc_generate_gtk(wusbhc);
+ /* roll the gtk index. */
+ wusbhc->gtk_index = (wusbhc->gtk_index + 1) % (WUSB_KEY_INDEX_MAX + 1);
+ /*
+ * Save all connected devices on a list while holding wusbhc->mutex and
+ * take a reference to each one. Then submit the set key request to
+ * them after releasing the lock in order to avoid a deadlock.
+ */
+ for (port_idx = 0; port_idx < wusbhc->ports_max; port_idx++) {
+ wusb_dev = wusbhc->port[port_idx].wusb_dev;
+ if (!wusb_dev || !wusb_dev->usb_dev
+ || !wusb_dev->usb_dev->authenticated)
+ continue;
- if (--wusbhc->pending_set_gtks == 0)
- wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size);
-
+ wusb_dev_get(wusb_dev);
+ list_add_tail(&wusb_dev->rekey_node, &rekey_list);
+ }
mutex_unlock(&wusbhc->mutex);
-}
-static void wusbhc_set_gtk_callback(struct urb *urb)
-{
- struct wusbhc *wusbhc = urb->context;
+ /* Submit the rekey requests without holding wusbhc->mutex. */
+ list_for_each_entry_safe(wusb_dev, wusb_dev_next, &rekey_list,
+ rekey_node) {
+ list_del_init(&wusb_dev->rekey_node);
+ dev_dbg(&wusb_dev->usb_dev->dev, "%s: rekey device at port %d\n",
+ __func__, wusb_dev->port_idx);
- queue_work(wusbd, &wusbhc->gtk_rekey_done_work);
+ if (wusb_dev_set_gtk(wusbhc, wusb_dev) < 0) {
+ dev_err(&wusb_dev->usb_dev->dev, "%s: rekey device at port %d failed\n",
+ __func__, wusb_dev->port_idx);
+ }
+ wusb_dev_put(wusb_dev);
+ }
+
+ /* Switch the host controller to use the new GTK. */
+ mutex_lock(&wusbhc->mutex);
+ wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid,
+ &wusbhc->gtk.descr.bKeyData, key_size);
+ mutex_unlock(&wusbhc->mutex);
}
/**
@@ -553,26 +583,12 @@
*/
void wusbhc_gtk_rekey(struct wusbhc *wusbhc)
{
- static const size_t key_size = sizeof(wusbhc->gtk.data);
- int p;
-
- wusbhc_generate_gtk(wusbhc);
-
- for (p = 0; p < wusbhc->ports_max; p++) {
- struct wusb_dev *wusb_dev;
-
- wusb_dev = wusbhc->port[p].wusb_dev;
- if (!wusb_dev || !wusb_dev->usb_dev || !wusb_dev->usb_dev->authenticated)
- continue;
-
- usb_fill_control_urb(wusb_dev->set_gtk_urb, wusb_dev->usb_dev,
- usb_sndctrlpipe(wusb_dev->usb_dev, 0),
- (void *)wusb_dev->set_gtk_req,
- &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength,
- wusbhc_set_gtk_callback, wusbhc);
- if (usb_submit_urb(wusb_dev->set_gtk_urb, GFP_KERNEL) == 0)
- wusbhc->pending_set_gtks++;
- }
- if (wusbhc->pending_set_gtks == 0)
- wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size);
+ /*
+ * We need to submit a URB to the downstream WUSB devices in order to
+ * change the group key. This can't be done while holding the
+ * wusbhc->mutex since that is also taken in the urb_enqueue routine
+ * and will cause a deadlock. Instead, queue a work item to do
+ * it when the lock is not held
+ */
+ queue_work(wusbd, &wusbhc->gtk_rekey_work);
}
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 711b195..6bd3b81 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -97,6 +97,7 @@
struct kref refcnt;
struct wusbhc *wusbhc;
struct list_head cack_node; /* Connect-Ack list */
+ struct list_head rekey_node; /* GTK rekey list */
u8 port_idx;
u8 addr;
u8 beacon_type:4;
@@ -107,8 +108,6 @@
struct usb_wireless_cap_descriptor *wusb_cap_descr;
struct uwb_mas_bm availability;
struct work_struct devconnect_acked_work;
- struct urb *set_gtk_urb;
- struct usb_ctrlrequest *set_gtk_req;
struct usb_device *usb_dev;
};
@@ -296,8 +295,7 @@
} __attribute__((packed)) gtk;
u8 gtk_index;
u32 gtk_tkid;
- struct work_struct gtk_rekey_done_work;
- int pending_set_gtks;
+ struct work_struct gtk_rekey_work;
struct usb_encryption_descriptor *ccm1_etd;
};
diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h
index 64ebede..6a626a5 100644
--- a/include/crypto/scatterwalk.h
+++ b/include/crypto/scatterwalk.h
@@ -44,7 +44,7 @@
if (sg_is_last(sg))
return NULL;
- return (++sg)->length ? sg : (void *)sg_page(sg);
+ return (++sg)->length ? sg : sg_chain_ptr(sg);
}
static inline void scatterwalk_crypto_chain(struct scatterlist *head,
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index 206a2af..b914ca3 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -42,6 +42,8 @@
s32 units;
s32 unit_expo;
s32 size;
+ s32 logical_minimum;
+ s32 logical_maximum;
};
/**
diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h
index 4f945d3..8323775 100644
--- a/include/linux/hid-sensor-ids.h
+++ b/include/linux/hid-sensor-ids.h
@@ -117,4 +117,16 @@
#define HID_USAGE_SENSOR_PROP_REPORT_STATE 0x200316
#define HID_USAGE_SENSOR_PROY_POWER_STATE 0x200319
+/* Power state enumerations */
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x00
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM 0x01
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM 0x02
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM 0x03
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM 0x04
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM 0x05
+
+/* Report State enumerations */
+#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x00
+#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x01
+
#endif
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 7454865..512ab16 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1264,6 +1264,8 @@
* @sg: scatter gather buffer list, the buffer size of each element in
* the list (except the last) must be divisible by the endpoint's
* max packet size if no_sg_constraint isn't set in 'struct usb_bus'
+ * (FIXME: scatter-gather under xHCI is broken for periodic transfers.
+ * Do not use urb->sg for interrupt endpoints for now, only bulk.)
* @num_mapped_sgs: (internal) number of mapped sg entries
* @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h
index 0c4d4ca..eeb2832 100644
--- a/include/linux/usb/wusb.h
+++ b/include/linux/usb/wusb.h
@@ -271,6 +271,8 @@
#define WUSB_KEY_INDEX_TYPE_GTK 2
#define WUSB_KEY_INDEX_ORIGINATOR_HOST 0
#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE 1
+/* bits 0-3 used for the key index. */
+#define WUSB_KEY_INDEX_MAX 15
/* A CCM Nonce, defined in WUSB1.0[6.4.1] */
struct aes_ccm_nonce {
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index a372627..ecc8859 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -719,6 +719,8 @@
#define BTN_DPAD_LEFT 0x222
#define BTN_DPAD_RIGHT 0x223
+#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
+
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
@@ -856,6 +858,7 @@
#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
#define SW_LINEIN_INSERT 0x0d /* set = inserted */
+#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
#define SW_MAX 0x0f
#define SW_CNT (SW_MAX+1)
diff --git a/include/uapi/linux/mic_common.h b/include/uapi/linux/mic_common.h
index 17e7d95..6eb4024 100644
--- a/include/uapi/linux/mic_common.h
+++ b/include/uapi/linux/mic_common.h
@@ -23,12 +23,7 @@
#include <linux/virtio_ring.h>
-#ifndef __KERNEL__
-#define ALIGN(a, x) (((a) + (x) - 1) & ~((x) - 1))
-#define __aligned(x) __attribute__ ((aligned(x)))
-#endif
-
-#define mic_aligned_size(x) ALIGN(sizeof(x), 8)
+#define __mic_align(a, x) (((a) + (x) - 1) & ~((x) - 1))
/**
* struct mic_device_desc: Virtio device information shared between the
@@ -48,8 +43,8 @@
__u8 feature_len;
__u8 config_len;
__u8 status;
- __u64 config[0];
-} __aligned(8);
+ __le64 config[0];
+} __attribute__ ((aligned(8)));
/**
* struct mic_device_ctrl: Per virtio device information in the device page
@@ -66,7 +61,7 @@
* @h2c_vdev_db: The doorbell number to be used by host. Set by guest.
*/
struct mic_device_ctrl {
- __u64 vdev;
+ __le64 vdev;
__u8 config_change;
__u8 vdev_reset;
__u8 guest_ack;
@@ -74,7 +69,7 @@
__u8 used_address_updated;
__s8 c2h_vdev_db;
__s8 h2c_vdev_db;
-} __aligned(8);
+} __attribute__ ((aligned(8)));
/**
* struct mic_bootparam: Virtio device independent information in device page
@@ -87,13 +82,13 @@
* @shutdown_card: Set to 1 by the host when a card shutdown is initiated
*/
struct mic_bootparam {
- __u32 magic;
+ __le32 magic;
__s8 c2h_shutdown_db;
__s8 h2c_shutdown_db;
__s8 h2c_config_db;
__u8 shutdown_status;
__u8 shutdown_card;
-} __aligned(8);
+} __attribute__ ((aligned(8)));
/**
* struct mic_device_page: High level representation of the device page
@@ -116,10 +111,10 @@
* @num: The number of entries in the virtio_ring
*/
struct mic_vqconfig {
- __u64 address;
- __u64 used_address;
- __u16 num;
-} __aligned(8);
+ __le64 address;
+ __le64 used_address;
+ __le16 num;
+} __attribute__ ((aligned(8)));
/*
* The alignment to use between consumer and producer parts of vring.
@@ -154,7 +149,7 @@
*/
struct _mic_vring_info {
__u16 avail_idx;
- int magic;
+ __le32 magic;
};
/**
@@ -173,15 +168,13 @@
int len;
};
-#define mic_aligned_desc_size(d) ALIGN(mic_desc_size(d), 8)
+#define mic_aligned_desc_size(d) __mic_align(mic_desc_size(d), 8)
#ifndef INTEL_MIC_CARD
static inline unsigned mic_desc_size(const struct mic_device_desc *desc)
{
- return mic_aligned_size(*desc)
- + desc->num_vq * mic_aligned_size(struct mic_vqconfig)
- + desc->feature_len * 2
- + desc->config_len;
+ return sizeof(*desc) + desc->num_vq * sizeof(struct mic_vqconfig)
+ + desc->feature_len * 2 + desc->config_len;
}
static inline struct mic_vqconfig *
@@ -201,8 +194,7 @@
}
static inline unsigned mic_total_desc_size(struct mic_device_desc *desc)
{
- return mic_aligned_desc_size(desc) +
- mic_aligned_size(struct mic_device_ctrl);
+ return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl);
}
#endif
diff --git a/tools/usb/Makefile b/tools/usb/Makefile
index 396d6c4..acf2165 100644
--- a/tools/usb/Makefile
+++ b/tools/usb/Makefile
@@ -3,11 +3,12 @@
CC = $(CROSS_COMPILE)gcc
PTHREAD_LIBS = -lpthread
WARNINGS = -Wall -Wextra
-CFLAGS = $(WARNINGS) -g $(PTHREAD_LIBS) -I../include
+CFLAGS = $(WARNINGS) -g -I../include
+LDFLAGS = $(PTHREAD_LIBS)
all: testusb ffs-test
%: %.c
- $(CC) $(CFLAGS) -o $@ $^
+ $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS)
clean:
$(RM) testusb ffs-test