Merge commit 'gcl/next' into next
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5c10af6..ad6b1c0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -313,7 +313,7 @@
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on (PPC_PRPMC2800 || PPC_MULTIPLATFORM) && EXPERIMENTAL
+ depends on BOOK3S && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 08f7cc0..22091bb 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -129,7 +129,7 @@
config BOOTX_TEXT
bool "Support for early boot text console (BootX or OpenFirmware only)"
- depends on PPC_OF && PPC_MULTIPLATFORM
+ depends on PPC_OF && PPC_BOOK3S
help
Say Y here to see progress messages from the boot firmware in text
mode. Requires either BootX or Open Firmware.
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 72d17f5..551fc58 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -147,8 +147,8 @@
arch/powerpc/mm/ \
arch/powerpc/lib/ \
arch/powerpc/sysdev/ \
- arch/powerpc/platforms/
-core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/
+ arch/powerpc/platforms/ \
+ arch/powerpc/math-emu/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_KVM) += arch/powerpc/kvm/
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
new file mode 100644
index 0000000..0ddfdfc
--- /dev/null
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -0,0 +1,364 @@
+/*
+ * GE Fanuc PPC9A Device Tree Source
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
+ */
+
+/dts-v1/;
+
+/ {
+ model = "GEF_PPC9A";
+ compatible = "gef,ppc9a";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8641@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>; // set by uboot
+ };
+
+ localbus@fef05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-localbus", "simple-bus";
+ reg = <0xfef05000 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
+ 1 0 0xe8000000 0x08000000 // Paged Flash 0
+ 2 0 0xe0000000 0x08000000 // Paged Flash 1
+ 3 0 0xfc100000 0x00020000 // NVRAM
+ 4 0 0xfc000000 0x00008000 // FPGA
+ 5 0 0xfc008000 0x00008000 // AFIX FPGA
+ 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
+ 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
+
+ /* flash@0,0 is a mirror of part of the memory in flash@1,0
+ flash@0,0 {
+ compatible = "gef,ppc9a-firmware-mirror", "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "firmware";
+ reg = <0x0 0x1000000>;
+ read-only;
+ };
+ };
+ */
+
+ flash@1,0 {
+ compatible = "gef,ppc9a-paged-flash", "cfi-flash";
+ reg = <0x1 0x0 0x8000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "user";
+ reg = <0x0 0x7800000>;
+ };
+ partition@7800000 {
+ label = "firmware";
+ reg = <0x7800000 0x800000>;
+ read-only;
+ };
+ };
+
+ fpga@4,0 {
+ compatible = "gef,ppc9a-fpga-regs";
+ reg = <0x4 0x0 0x40>;
+ };
+
+ wdt@4,2000 {
+ compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
+ reg = <0x4 0x2000 0x8>;
+ interrupts = <0x1a 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+ /* Second watchdog available, driver currently supports one.
+ wdt@4,2010 {
+ compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+ "gef,fpga-wdt";
+ reg = <0x4 0x2010 0x8>;
+ interrupts = <0x1b 0x4>;
+ interrupt-parent = <&gef_pic>;
+ };
+ */
+ gef_pic: pic@4,4000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
+ reg = <0x4 0x4000 0x20>;
+ interrupts = <0x8
+ 0x9>;
+ interrupt-parent = <&mpic>;
+
+ };
+ gef_gpio: gpio@7,14000 {
+ #gpio-cells = <2>;
+ compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio";
+ reg = <0x7 0x14000 0x24>;
+ gpio-controller;
+ };
+ };
+
+ soc@fef00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ compatible = "fsl,mpc8641-soc", "simple-bus";
+ ranges = <0x0 0xfef00000 0x00100000>;
+ reg = <0xfef00000 0x100000>; // CCSRBAR 1M
+ bus-frequency = <33333333>;
+
+ i2c1: i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ hwmon@48 {
+ compatible = "national,lm92";
+ reg = <0x48>;
+ };
+
+ hwmon@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+
+ rtc@51 {
+ compatible = "epson,rx8581";
+ reg = <0x00000051>;
+ };
+
+ eti@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+ };
+
+ i2c2: i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "gmii";
+ };
+
+ enet1: ethernet@26000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "gmii";
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <0x2a 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <0x1c 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8641-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@fef08000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xfef08000 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+ 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <0x18 0x2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x40000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00400000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 15d9e35..32178bf 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -227,7 +227,7 @@
device_type = "open-pic";
protected-sources = <
31 32 33 37 38 39 /* enet2 enet3 */
- 76 77 78 79 27 42 /* dma2 pci2 serial*/
+ 76 77 78 79 26 42 /* dma2 pci2 serial*/
0xe0 0xe1 0xe2 0xe3 /* msi */
0xe4 0xe5 0xe6 0xe7
>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index eace811..159cb3a 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -186,7 +186,7 @@
protected-sources = <
18 16 10 42 45 58 /* MEM L2 mdio serial crypto */
29 30 34 35 36 40 /* enet0 enet1 */
- 24 26 20 21 22 23 /* pcie0 pcie1 dma1 */
+ 24 25 20 21 22 23 /* pci0 pci1 dma1 */
43 /* i2c */
0x1 0x2 0x3 0x4 /* pci slot */
0x9 0xa 0xb 0xc /* usb */
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
new file mode 100644
index 0000000..df2c163
--- /dev/null
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -0,0 +1,1889 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc7
+# Fri Mar 13 15:36:11 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_MPC8641_HPCN is not set
+# CONFIG_SBC8641D is not set
+# CONFIG_MPC8610_HPCD is not set
+CONFIG_GEF_PPC9A=y
+# CONFIG_GEF_SBC310 is not set
+# CONFIG_GEF_SBC610 is not set
+CONFIG_MPC8641=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_MULTIQ is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_DS1682=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM92=y
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_GEF_WDT=y
+# CONFIG_8xxx_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+CONFIG_RTC_DRV_RX8581=y
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index f75a5fc..b7e034b 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -129,7 +129,7 @@
* interrupt-retrigger: should we handle this via lost interrupts and IPIs
* or should we not care like we do now ? --BenH.
*/
-struct hw_interrupt_type;
+struct irq_chip;
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HW_IRQ_H */
diff --git a/arch/powerpc/include/asm/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h
deleted file mode 100644
index 1dbca4e7..0000000
--- a/arch/powerpc/include/asm/pgtable-4k.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_4K_H
-#define _ASM_POWERPC_PGTABLE_4K_H
-/*
- * Entries per page directory level. The PTE level must use a 64b record
- * for each page table entry. The PMD and PGD level use a 32b record for
- * each entry by assuming that each entry is page aligned.
- */
-#define PTE_INDEX_SIZE 9
-#define PMD_INDEX_SIZE 7
-#define PUD_INDEX_SIZE 7
-#define PGD_INDEX_SIZE 9
-
-#ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE)
-#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE)
-#define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE)
-#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE)
-#endif /* __ASSEMBLY__ */
-
-#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE)
-#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PUD (1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE)
-
-/* PMD_SHIFT determines what a second-level page table entry can map */
-#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE)
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-/* With 4k base page size, hugepage PTEs go at the PMD level */
-#define MIN_HUGEPTE_SHIFT PMD_SHIFT
-
-/* PUD_SHIFT determines what a third-level page table entry can map */
-#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE)
-#define PUD_SIZE (1UL << PUD_SHIFT)
-#define PUD_MASK (~(PUD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
-#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE)
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/* PTE bits */
-#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */
-#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
-#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */
-#define _PAGE_F_SECOND _PAGE_SECONDARY
-#define _PAGE_F_GIX _PAGE_GROUP_IX
-#define _PAGE_SPECIAL 0x10000 /* software: special page */
-#define __HAVE_ARCH_PTE_SPECIAL
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
- _PAGE_SECONDARY | _PAGE_GROUP_IX)
-
-/* There is no 4K PFN hack on 4K pages */
-#define _PAGE_4K_PFN 0
-
-/* PAGE_MASK gives the right answer below, but only by accident */
-/* It should be preserving the high 48 bits and then specifically */
-/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
- _PAGE_HPTEFLAGS | _PAGE_SPECIAL)
-
-/* Bits to mask out from a PMD to get to the PTE page */
-#define PMD_MASKED_BITS 0
-/* Bits to mask out from a PUD to get to the PMD page */
-#define PUD_MASKED_BITS 0
-/* Bits to mask out from a PGD to get to the PUD page */
-#define PGD_MASKED_BITS 0
-
-/* shift to put page number into pte */
-#define PTE_RPN_SHIFT (17)
-
-#ifdef STRICT_MM_TYPECHECKS
-#define __real_pte(e,p) ((real_pte_t){(e)})
-#define __rpte_to_pte(r) ((r).pte)
-#else
-#define __real_pte(e,p) (e)
-#define __rpte_to_pte(r) (__pte(r))
-#endif
-#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12)
-
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \
- do { \
- index = 0; \
- shift = mmu_psize_defs[psize].shift; \
-
-#define pte_iterate_hashed_end() } while(0)
-
-#ifdef CONFIG_PPC_HAS_HASH_64K
-#define pte_pagesize_index(mm, addr, pte) get_slice_psize(mm, addr)
-#else
-#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K
-#endif
-
-/*
- * 4-level page tables related bits
- */
-
-#define pgd_none(pgd) (!pgd_val(pgd))
-#define pgd_bad(pgd) (pgd_val(pgd) == 0)
-#define pgd_present(pgd) (pgd_val(pgd) != 0)
-#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0)
-#define pgd_page_vaddr(pgd) (pgd_val(pgd) & ~PGD_MASKED_BITS)
-#define pgd_page(pgd) virt_to_page(pgd_page_vaddr(pgd))
-
-#define pud_offset(pgdp, addr) \
- (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
- (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
-
-#define pud_ERROR(e) \
- printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
-
-#define remap_4k_pfn(vma, addr, pfn, prot) \
- remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
-#endif /* _ASM_POWERPC_PGTABLE_4K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 98bd7c5..67ceffc 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -19,55 +19,6 @@
#endif /* __ASSEMBLY__ */
/*
- * The PowerPC MMU uses a hash table containing PTEs, together with
- * a set of 16 segment registers (on 32-bit implementations), to define
- * the virtual to physical address mapping.
- *
- * We use the hash table as an extended TLB, i.e. a cache of currently
- * active mappings. We maintain a two-level page table tree, much
- * like that used by the i386, for the sake of the Linux memory
- * management code. Low-level assembler code in hashtable.S
- * (procedure hash_page) is responsible for extracting ptes from the
- * tree and putting them into the hash table when necessary, and
- * updating the accessed and modified bits in the page table tree.
- */
-
-/*
- * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
- * We also use the two level tables, but we can put the real bits in them
- * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
- * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
- * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
- * based upon user/super access. The TLB does not have accessed nor write
- * protect. We assume that if the TLB get loaded with an entry it is
- * accessed, and overload the changed bit for write protect. We use
- * two bits in the software pte that are supposed to be set to zero in
- * the TLB entry (24 and 25) for these indicators. Although the level 1
- * descriptor contains the guarded and writethrough/copyback bits, we can
- * set these at the page level since they get copied from the Mx_TWC
- * register when the TLB entry is loaded. We will use bit 27 for guard, since
- * that is where it exists in the MD_TWC, and bit 26 for writethrough.
- * These will get masked from the level 2 descriptor at TLB load time, and
- * copied to the MD_TWC before it gets loaded.
- * Large page sizes added. We currently support two sizes, 4K and 8M.
- * This also allows a TLB hander optimization because we can directly
- * load the PMD into MD_TWC. The 8M pages are only used for kernel
- * mapping of well known areas. The PMD (PGD) entries contain control
- * flags in addition to the address, so care must be taken that the
- * software no longer assumes these are only pointers.
- */
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully-associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively (see "mmu.h" for definitions).
- */
-
-/*
* The normal case is that PTEs are 32-bits and we have a 1-page
* 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
*
@@ -135,261 +86,25 @@
*/
#if defined(CONFIG_40x)
-
-/* There are several potential gotchas here. The 40x hardware TLBLO
- field looks like this:
-
- 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- RPN..................... 0 0 EX WR ZSEL....... W I M G
-
- Where possible we make the Linux PTE bits match up with this
-
- - bits 20 and 21 must be cleared, because we use 4k pages (40x can
- support down to 1k pages), this is done in the TLBMiss exception
- handler.
- - We use only zones 0 (for kernel pages) and 1 (for user pages)
- of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
- miss handler. Bit 27 is PAGE_USER, thus selecting the correct
- zone.
- - PRESENT *must* be in the bottom two bits because swap cache
- entries use the top 30 bits. Because 40x doesn't support SMP
- anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
- is cleared in the TLB miss handler before the TLB entry is loaded.
- - All other bits of the PTE are loaded into TLBLO without
- modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
- software PTE bits. We actually use use bits 21, 24, 25, and
- 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
- PRESENT.
-*/
-
-/* Definitions for 40x embedded chips. */
-#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
-#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
-#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
-#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
-#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
-#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
-#define _PAGE_RW 0x040 /* software: Writes permitted */
-#define _PAGE_DIRTY 0x080 /* software: dirty page */
-#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
-#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
-#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
-
-#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
-#define _PMD_BAD 0x802
-#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
-#define _PMD_SIZE_4M 0x0c0
-#define _PMD_SIZE_16M 0x0e0
-#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
-
-/* Until my rework is finished, 40x still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES 1
-
+#include <asm/pte-40x.h>
#elif defined(CONFIG_44x)
-/*
- * Definitions for PPC440
- *
- * Because of the 3 word TLB entries to support 36-bit addressing,
- * the attribute are difficult to map in such a fashion that they
- * are easily loaded during exception processing. I decided to
- * organize the entry so the ERPN is the only portion in the
- * upper word of the PTE and the attribute bits below are packed
- * in as sensibly as they can be in the area below a 4KB page size
- * oriented RPN. This at least makes it easy to load the RPN and
- * ERPN fields in the TLB. -Matt
- *
- * Note that these bits preclude future use of a page size
- * less than 4KB.
- *
- *
- * PPC 440 core has following TLB attribute fields;
- *
- * TLB1:
- * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * RPN................................. - - - - - - ERPN.......
- *
- * TLB2:
- * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
- *
- * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
- * TLB2 storage attibute fields. Those are:
- *
- * TLB2:
- * 0...10 11 12 13 14 15 16...31
- * no change WL1 IL1I IL1D IL2I IL2D no change
- *
- * There are some constrains and options, to decide mapping software bits
- * into TLB entry.
- *
- * - PRESENT *must* be in the bottom three bits because swap cache
- * entries use the top 29 bits for TLB2.
- *
- * - FILE *must* be in the bottom three bits because swap cache
- * entries use the top 29 bits for TLB2.
- *
- * - CACHE COHERENT bit (M) has no effect on original PPC440 cores,
- * because it doesn't support SMP. However, some later 460 variants
- * have -some- form of SMP support and so I keep the bit there for
- * future use
- *
- * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
- * for memory protection related functions (see PTE structure in
- * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
- * above bits. Note that the bit values are CPU specific, not architecture
- * specific.
- *
- * The kernel PTE entry holds an arch-dependent swp_entry structure under
- * certain situations. In other words, in such situations some portion of
- * the PTE bits are used as a swp_entry. In the PPC implementation, the
- * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
- * hold protection values. That means the three protection bits are
- * reserved for both PTE and SWAP entry at the most significant three
- * LSBs.
- *
- * There are three protection bits available for SWAP entry:
- * _PAGE_PRESENT
- * _PAGE_FILE
- * _PAGE_HASHPTE (if HW has)
- *
- * So those three bits have to be inside of 0-2nd LSB of PTE.
- *
- */
-
-#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
-#define _PAGE_RW 0x00000002 /* S: Write permission */
-#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
-#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */
-#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
-#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */
-#define _PAGE_SPECIAL 0x00000020 /* S: Special page */
-#define _PAGE_USER 0x00000040 /* S: User page */
-#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
-#define _PAGE_GUARDED 0x00000100 /* H: G bit */
-#define _PAGE_COHERENT 0x00000200 /* H: M bit */
-#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
-#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
-
-/* TODO: Add large page lowmem mapping support */
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK 0xffffffff00000000ULL
-
-#define __HAVE_ARCH_PTE_SPECIAL
-
+#include <asm/pte-44x.h>
#elif defined(CONFIG_FSL_BOOKE)
-/*
- MMU Assist Register 3:
-
- 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
- RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR
-
- - PRESENT *must* be in the bottom three bits because swap cache
- entries use the top 29 bits.
-
- - FILE *must* be in the bottom three bits because swap cache
- entries use the top 29 bits.
-*/
-
-/* Definitions for FSL Book-E Cores */
-#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */
-#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */
-#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */
-#define _PAGE_RW 0x00004 /* S: Write permission (SW) */
-#define _PAGE_DIRTY 0x00008 /* S: Page dirty */
-#define _PAGE_HWEXEC 0x00010 /* H: SX permission */
-#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */
-
-#define _PAGE_ENDIAN 0x00040 /* H: E bit */
-#define _PAGE_GUARDED 0x00080 /* H: G bit */
-#define _PAGE_COHERENT 0x00100 /* H: M bit */
-#define _PAGE_NO_CACHE 0x00200 /* H: I bit */
-#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
-#define _PAGE_SPECIAL 0x00800 /* S: Special page */
-
-#ifdef CONFIG_PTE_64BIT
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK 0xffffffffffff0000ULL
-#endif
-
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-#define __HAVE_ARCH_PTE_SPECIAL
-
+#include <asm/pte-fsl-booke.h>
#elif defined(CONFIG_8xx)
-/* Definitions for 8xx embedded chips. */
-#define _PAGE_PRESENT 0x0001 /* Page is valid */
-#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
-#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
-#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
-
-/* These five software bits must be masked out when the entry is loaded
- * into the TLB.
- */
-#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
-#define _PAGE_GUARDED 0x0010 /* software: guarded access */
-#define _PAGE_DIRTY 0x0020 /* software: page changed */
-#define _PAGE_RW 0x0040 /* software: user write access allowed */
-#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
-
-/* Setting any bits in the nibble with the follow two controls will
- * require a TLB exception handler change. It is assumed unused bits
- * are always zero.
- */
-#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
-#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
-
-#define _PMD_PRESENT 0x0001
-#define _PMD_BAD 0x0ff0
-#define _PMD_PAGE_MASK 0x000c
-#define _PMD_PAGE_8M 0x000c
-
-#define _PTE_NONE_MASK _PAGE_ACCESSED
-
-/* Until my rework is finished, 8xx still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES 1
-
+#include <asm/pte-8xx.h>
#else /* CONFIG_6xx */
-/* Definitions for 60x, 740/750, etc. */
-#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
-#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
-#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
-#define _PAGE_USER 0x004 /* usermode access allowed */
-#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
-#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
-#define _PAGE_DIRTY 0x080 /* C: page changed */
-#define _PAGE_ACCESSED 0x100 /* R: page referenced */
-#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
-#define _PAGE_RW 0x400 /* software: user write access allowed */
-#define _PAGE_SPECIAL 0x800 /* software: Special page */
-
-#ifdef CONFIG_PTE_64BIT
-/* We never clear the high word of the pte */
-#define _PTE_NONE_MASK (0xffffffff00000000ULL | _PAGE_HASHPTE)
-#else
-#define _PTE_NONE_MASK _PAGE_HASHPTE
+#include <asm/pte-hash32.h>
#endif
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-/* Hash table based platforms need atomic updates of the linux PTE */
-#define PTE_ATOMIC_UPDATES 1
-
+/* If _PAGE_SPECIAL is defined, then we advertise our support for it */
+#ifdef _PAGE_SPECIAL
#define __HAVE_ARCH_PTE_SPECIAL
-
#endif
/*
- * Some bits are only used on some cpu families...
+ * Some bits are only used on some cpu families... Make sure that all
+ * the undefined gets defined as 0
*/
#ifndef _PAGE_HASHPTE
#define _PAGE_HASHPTE 0
@@ -431,9 +146,29 @@
#define _PAGE_HPTEFLAGS _PAGE_HASHPTE
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
- _PAGE_SPECIAL)
+/* Location of the PFN in the PTE. Most platforms use the same as _PAGE_SHIFT
+ * here (ie, naturally aligned). Platform who don't just pre-define the
+ * value so we don't override it here
+ */
+#ifndef PTE_RPN_SHIFT
+#define PTE_RPN_SHIFT (PAGE_SHIFT)
+#endif
+#ifdef CONFIG_PTE_64BIT
+#define PTE_RPN_MAX (1ULL << (64 - PTE_RPN_SHIFT))
+#define PTE_RPN_MASK (~((1ULL<<PTE_RPN_SHIFT)-1))
+#else
+#define PTE_RPN_MAX (1UL << (32 - PTE_RPN_SHIFT))
+#define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1))
+#endif
+
+/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
+ * pgprot changes
+ */
+#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+ _PAGE_ACCESSED | _PAGE_SPECIAL)
+
+/* Mask of bits returned by pte_pgprot() */
#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
_PAGE_WRITETHRU | _PAGE_ENDIAN | \
_PAGE_USER | _PAGE_ACCESSED | \
@@ -521,18 +256,10 @@
* Conversions between PTE values and page frame numbers.
*/
-/* in some case we want to additionaly adjust where the pfn is in the pte to
- * allow room for more flags */
-#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
-#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8)
-#else
-#define PFN_SHIFT_OFFSET (PAGE_SHIFT)
-#endif
-
-#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
+#define pte_pfn(x) (pte_val(x) >> PTE_RPN_SHIFT)
#define pte_page(x) pfn_to_page(pte_pfn(x))
-#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
+#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |\
pgprot_val(prot))
#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
#endif /* __ASSEMBLY__ */
@@ -600,11 +327,19 @@
unsigned long address);
/*
- * Atomic PTE updates.
+ * PTE updates. This function is called whenever an existing
+ * valid PTE is updated. This does -not- include set_pte_at()
+ * which nowadays only sets a new PTE.
*
- * pte_update clears and sets bit atomically, and returns
- * the old pte value. In the 64-bit PTE case we lock around the
- * low PTE word since we expect ALL flag bits to be there
+ * Depending on the type of MMU, we may need to use atomic updates
+ * and the PTE may be either 32 or 64 bit wide. In the later case,
+ * when using atomic updates, only the low part of the PTE is
+ * accessed atomically.
+ *
+ * In addition, on 44x, we also maintain a global flag indicating
+ * that an executable user mapping was modified, which is needed
+ * to properly flush the virtually tagged instruction cache of
+ * those implementations.
*/
#ifndef CONFIG_PTE_64BIT
static inline unsigned long pte_update(pte_t *p,
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-4k.h b/arch/powerpc/include/asm/pgtable-ppc64-4k.h
new file mode 100644
index 0000000..6eefdcf
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-ppc64-4k.h
@@ -0,0 +1,74 @@
+#ifndef _ASM_POWERPC_PGTABLE_PPC64_4K_H
+#define _ASM_POWERPC_PGTABLE_PPC64_4K_H
+/*
+ * Entries per page directory level. The PTE level must use a 64b record
+ * for each page table entry. The PMD and PGD level use a 32b record for
+ * each entry by assuming that each entry is page aligned.
+ */
+#define PTE_INDEX_SIZE 9
+#define PMD_INDEX_SIZE 7
+#define PUD_INDEX_SIZE 7
+#define PGD_INDEX_SIZE 9
+
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE)
+#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif /* __ASSEMBLY__ */
+
+#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PUD (1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE)
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT PMD_SHIFT
+
+/* PUD_SHIFT determines what a third-level page table entry can map */
+#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE)
+#define PUD_SIZE (1UL << PUD_SHIFT)
+#define PUD_MASK (~(PUD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
+#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE)
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS 0
+/* Bits to mask out from a PUD to get to the PMD page */
+#define PUD_MASKED_BITS 0
+/* Bits to mask out from a PGD to get to the PUD page */
+#define PGD_MASKED_BITS 0
+
+
+/*
+ * 4-level page tables related bits
+ */
+
+#define pgd_none(pgd) (!pgd_val(pgd))
+#define pgd_bad(pgd) (pgd_val(pgd) == 0)
+#define pgd_present(pgd) (pgd_val(pgd) != 0)
+#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0)
+#define pgd_page_vaddr(pgd) (pgd_val(pgd) & ~PGD_MASKED_BITS)
+#define pgd_page(pgd) virt_to_page(pgd_page_vaddr(pgd))
+
+#define pud_offset(pgdp, addr) \
+ (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
+ (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
+
+#define pud_ERROR(e) \
+ printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+
+/*
+ * On all 4K setups, remap_4k_pfn() equates to remap_pfn_range() */
+#define remap_4k_pfn(vma, addr, pfn, prot) \
+ remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC64_4K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
new file mode 100644
index 0000000..6cc085b
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_POWERPC_PGTABLE_PPC64_64K_H
+#define _ASM_POWERPC_PGTABLE_PPC64_64K_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+
+#define PTE_INDEX_SIZE 12
+#define PMD_INDEX_SIZE 12
+#define PUD_INDEX_SIZE 0
+#define PGD_INDEX_SIZE 4
+
+#ifndef __ASSEMBLY__
+
+#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE)
+
+#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE)
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT PAGE_SHIFT
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE)
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+#endif /* __ASSEMBLY__ */
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS 0x1ff
+/* Bits to mask out from a PGD/PUD to get to the PMD page */
+#define PUD_MASKED_BITS 0x1ff
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC64_64K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index c627877..5420738 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -11,9 +11,9 @@
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_PPC_64K_PAGES
-#include <asm/pgtable-64k.h>
+#include <asm/pgtable-ppc64-64k.h>
#else
-#include <asm/pgtable-4k.h>
+#include <asm/pgtable-ppc64-4k.h>
#endif
#define FIRST_USER_ADDRESS 0
@@ -25,6 +25,8 @@
PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE)
+
+/* Some sanity checking */
#if TASK_SIZE_USER64 > PGTABLE_RANGE
#error TASK_SIZE_USER64 exceeds pagetable range
#endif
@@ -33,7 +35,6 @@
#error TASK_SIZE_USER64 exceeds user VSID range
#endif
-
/*
* Define the address range of the vmalloc VM area.
*/
@@ -76,29 +77,26 @@
/*
- * Common bits in a linux-style PTE. These match the bits in the
- * (hardware-defined) PowerPC PTE as closely as possible. Additional
- * bits may be defined in pgtable-*.h
+ * Include the PTE bits definitions
*/
-#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */
-#define _PAGE_USER 0x0002 /* matches one of the PP bits */
-#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */
-#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */
-#define _PAGE_GUARDED 0x0008
-#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */
-#define _PAGE_DIRTY 0x0080 /* C: page changed */
-#define _PAGE_ACCESSED 0x0100 /* R: page referenced */
-#define _PAGE_RW 0x0200 /* software: user write access allowed */
-#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */
+#include <asm/pte-hash64.h>
-/* Strong Access Ordering */
-#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
+/* To make some generic powerpc code happy */
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC 0
+#endif
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
+/* Some other useful definitions */
+#define PTE_RPN_MAX (1UL << (64 - PTE_RPN_SHIFT))
+#define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1))
-#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY)
+/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
+ * pgprot changes
+ */
+#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+ _PAGE_ACCESSED | _PAGE_SPECIAL)
+
+
/* __pgprot defined in arch/powerpc/include/asm/page.h */
#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
@@ -117,16 +115,9 @@
#define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
#define HAVE_PAGE_AGP
-#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | \
- _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
- _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
- _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
-/* PTEIDX nibble */
-#define _PTEIDX_SECONDARY 0x8
-#define _PTEIDX_GROUP_IX 0x7
+/* We always have _PAGE_SPECIAL on 64 bit */
+#define __HAVE_ARCH_PTE_SPECIAL
-/* To make some generic powerpc code happy */
-#define _PAGE_HWEXEC 0
/*
* POWER4 and newer have per page execute protection, older chips can only
@@ -163,6 +154,38 @@
#ifndef __ASSEMBLY__
/*
+ * This is the default implementation of various PTE accessors, it's
+ * used in all cases except Book3S with 64K pages where we have a
+ * concept of sub-pages
+ */
+#ifndef __real_pte
+
+#ifdef STRICT_MM_TYPECHECKS
+#define __real_pte(e,p) ((real_pte_t){(e)})
+#define __rpte_to_pte(r) ((r).pte)
+#else
+#define __real_pte(e,p) (e)
+#define __rpte_to_pte(r) (__pte(r))
+#endif
+#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12)
+
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \
+ do { \
+ index = 0; \
+ shift = mmu_psize_defs[psize].shift; \
+
+#define pte_iterate_hashed_end() } while(0)
+
+#ifdef CONFIG_PPC_HAS_HASH_64K
+#define pte_pagesize_index(mm, addr, pte) get_slice_psize(mm, addr)
+#else
+#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K
+#endif
+
+#endif /* __real_pte */
+
+
+/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*
diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h
new file mode 100644
index 0000000..07630fa
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-40x.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_POWERPC_PTE_40x_H
+#define _ASM_POWERPC_PTE_40x_H
+#ifdef __KERNEL__
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully-associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively (see "mmu.h" for definitions).
+ *
+ * There are several potential gotchas here. The 40x hardware TLBLO
+ * field looks like this:
+ *
+ * 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN..................... 0 0 EX WR ZSEL....... W I M G
+ *
+ * Where possible we make the Linux PTE bits match up with this
+ *
+ * - bits 20 and 21 must be cleared, because we use 4k pages (40x can
+ * support down to 1k pages), this is done in the TLBMiss exception
+ * handler.
+ * - We use only zones 0 (for kernel pages) and 1 (for user pages)
+ * of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
+ * miss handler. Bit 27 is PAGE_USER, thus selecting the correct
+ * zone.
+ * - PRESENT *must* be in the bottom two bits because swap cache
+ * entries use the top 30 bits. Because 40x doesn't support SMP
+ * anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
+ * is cleared in the TLB miss handler before the TLB entry is loaded.
+ * - All other bits of the PTE are loaded into TLBLO without
+ * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+ * software PTE bits. We actually use use bits 21, 24, 25, and
+ * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+ * PRESENT.
+ */
+
+#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
+#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
+#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
+#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
+#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
+#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
+#define _PAGE_RW 0x040 /* software: Writes permitted */
+#define _PAGE_DIRTY 0x080 /* software: dirty page */
+#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
+#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
+
+#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
+#define _PMD_BAD 0x802
+#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
+#define _PMD_SIZE_4M 0x0c0
+#define _PMD_SIZE_16M 0x0e0
+
+#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
+
+/* Until my rework is finished, 40x still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES 1
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_40x_H */
diff --git a/arch/powerpc/include/asm/pte-44x.h b/arch/powerpc/include/asm/pte-44x.h
new file mode 100644
index 0000000..37e98bc
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-44x.h
@@ -0,0 +1,102 @@
+#ifndef _ASM_POWERPC_PTE_44x_H
+#define _ASM_POWERPC_PTE_44x_H
+#ifdef __KERNEL__
+
+/*
+ * Definitions for PPC440
+ *
+ * Because of the 3 word TLB entries to support 36-bit addressing,
+ * the attribute are difficult to map in such a fashion that they
+ * are easily loaded during exception processing. I decided to
+ * organize the entry so the ERPN is the only portion in the
+ * upper word of the PTE and the attribute bits below are packed
+ * in as sensibly as they can be in the area below a 4KB page size
+ * oriented RPN. This at least makes it easy to load the RPN and
+ * ERPN fields in the TLB. -Matt
+ *
+ * This isn't entirely true anymore, at least some bits are now
+ * easier to move into the TLB from the PTE. -BenH.
+ *
+ * Note that these bits preclude future use of a page size
+ * less than 4KB.
+ *
+ *
+ * PPC 440 core has following TLB attribute fields;
+ *
+ * TLB1:
+ * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN................................. - - - - - - ERPN.......
+ *
+ * TLB2:
+ * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
+ *
+ * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
+ * TLB2 storage attibute fields. Those are:
+ *
+ * TLB2:
+ * 0...10 11 12 13 14 15 16...31
+ * no change WL1 IL1I IL1D IL2I IL2D no change
+ *
+ * There are some constrains and options, to decide mapping software bits
+ * into TLB entry.
+ *
+ * - PRESENT *must* be in the bottom three bits because swap cache
+ * entries use the top 29 bits for TLB2.
+ *
+ * - FILE *must* be in the bottom three bits because swap cache
+ * entries use the top 29 bits for TLB2.
+ *
+ * - CACHE COHERENT bit (M) has no effect on original PPC440 cores,
+ * because it doesn't support SMP. However, some later 460 variants
+ * have -some- form of SMP support and so I keep the bit there for
+ * future use
+ *
+ * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
+ * for memory protection related functions (see PTE structure in
+ * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
+ * above bits. Note that the bit values are CPU specific, not architecture
+ * specific.
+ *
+ * The kernel PTE entry holds an arch-dependent swp_entry structure under
+ * certain situations. In other words, in such situations some portion of
+ * the PTE bits are used as a swp_entry. In the PPC implementation, the
+ * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
+ * hold protection values. That means the three protection bits are
+ * reserved for both PTE and SWAP entry at the most significant three
+ * LSBs.
+ *
+ * There are three protection bits available for SWAP entry:
+ * _PAGE_PRESENT
+ * _PAGE_FILE
+ * _PAGE_HASHPTE (if HW has)
+ *
+ * So those three bits have to be inside of 0-2nd LSB of PTE.
+ *
+ */
+
+#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
+#define _PAGE_RW 0x00000002 /* S: Write permission */
+#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
+#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */
+#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
+#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */
+#define _PAGE_SPECIAL 0x00000020 /* S: Special page */
+#define _PAGE_USER 0x00000040 /* S: User page */
+#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
+#define _PAGE_GUARDED 0x00000100 /* H: G bit */
+#define _PAGE_COHERENT 0x00000200 /* H: M bit */
+#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
+#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
+
+/* TODO: Add large page lowmem mapping support */
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK 0xffffffff00000000ULL
+
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_44x_H */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
new file mode 100644
index 0000000..b07acfd
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_POWERPC_PTE_8xx_H
+#define _ASM_POWERPC_PTE_8xx_H
+#ifdef __KERNEL__
+
+/*
+ * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
+ * We also use the two level tables, but we can put the real bits in them
+ * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
+ * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
+ * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
+ * based upon user/super access. The TLB does not have accessed nor write
+ * protect. We assume that if the TLB get loaded with an entry it is
+ * accessed, and overload the changed bit for write protect. We use
+ * two bits in the software pte that are supposed to be set to zero in
+ * the TLB entry (24 and 25) for these indicators. Although the level 1
+ * descriptor contains the guarded and writethrough/copyback bits, we can
+ * set these at the page level since they get copied from the Mx_TWC
+ * register when the TLB entry is loaded. We will use bit 27 for guard, since
+ * that is where it exists in the MD_TWC, and bit 26 for writethrough.
+ * These will get masked from the level 2 descriptor at TLB load time, and
+ * copied to the MD_TWC before it gets loaded.
+ * Large page sizes added. We currently support two sizes, 4K and 8M.
+ * This also allows a TLB hander optimization because we can directly
+ * load the PMD into MD_TWC. The 8M pages are only used for kernel
+ * mapping of well known areas. The PMD (PGD) entries contain control
+ * flags in addition to the address, so care must be taken that the
+ * software no longer assumes these are only pointers.
+ */
+
+/* Definitions for 8xx embedded chips. */
+#define _PAGE_PRESENT 0x0001 /* Page is valid */
+#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
+#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
+#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
+
+/* These five software bits must be masked out when the entry is loaded
+ * into the TLB.
+ */
+#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
+#define _PAGE_GUARDED 0x0010 /* software: guarded access */
+#define _PAGE_DIRTY 0x0020 /* software: page changed */
+#define _PAGE_RW 0x0040 /* software: user write access allowed */
+#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
+
+/* Setting any bits in the nibble with the follow two controls will
+ * require a TLB exception handler change. It is assumed unused bits
+ * are always zero.
+ */
+#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
+#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
+
+#define _PMD_PRESENT 0x0001
+#define _PMD_BAD 0x0ff0
+#define _PMD_PAGE_MASK 0x000c
+#define _PMD_PAGE_8M 0x000c
+
+#define _PTE_NONE_MASK _PAGE_ACCESSED
+
+/* Until my rework is finished, 8xx still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES 1
+
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_8xx_H */
diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h
new file mode 100644
index 0000000..10820f5
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-fsl-booke.h
@@ -0,0 +1,48 @@
+#ifndef _ASM_POWERPC_PTE_FSL_BOOKE_H
+#define _ASM_POWERPC_PTE_FSL_BOOKE_H
+#ifdef __KERNEL__
+
+/* PTE bit definitions for Freescale BookE SW loaded TLB MMU based
+ * processors
+ *
+ MMU Assist Register 3:
+
+ 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
+ RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR
+
+ - PRESENT *must* be in the bottom three bits because swap cache
+ entries use the top 29 bits.
+
+ - FILE *must* be in the bottom three bits because swap cache
+ entries use the top 29 bits.
+*/
+
+/* Definitions for FSL Book-E Cores */
+#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */
+#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */
+#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */
+#define _PAGE_RW 0x00004 /* S: Write permission (SW) */
+#define _PAGE_DIRTY 0x00008 /* S: Page dirty */
+#define _PAGE_HWEXEC 0x00010 /* H: SX permission */
+#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */
+
+#define _PAGE_ENDIAN 0x00040 /* H: E bit */
+#define _PAGE_GUARDED 0x00080 /* H: G bit */
+#define _PAGE_COHERENT 0x00100 /* H: M bit */
+#define _PAGE_NO_CACHE 0x00200 /* H: I bit */
+#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
+#define _PAGE_SPECIAL 0x00800 /* S: Special page */
+
+#ifdef CONFIG_PTE_64BIT
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK 0xffffffffffff0000ULL
+/* We extend the size of the PTE flags area when using 64-bit PTEs */
+#define PTE_RPN_SHIFT (PAGE_SHIFT + 8)
+#endif
+
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_FSL_BOOKE_H */
diff --git a/arch/powerpc/include/asm/pte-hash32.h b/arch/powerpc/include/asm/pte-hash32.h
new file mode 100644
index 0000000..6afe22b
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-hash32.h
@@ -0,0 +1,49 @@
+#ifndef _ASM_POWERPC_PTE_HASH32_H
+#define _ASM_POWERPC_PTE_HASH32_H
+#ifdef __KERNEL__
+
+/*
+ * The "classic" 32-bit implementation of the PowerPC MMU uses a hash
+ * table containing PTEs, together with a set of 16 segment registers,
+ * to define the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings. We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code. Low-level assembler code in hash_low_32.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
+#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
+#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
+#define _PAGE_USER 0x004 /* usermode access allowed */
+#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
+#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
+#define _PAGE_DIRTY 0x080 /* C: page changed */
+#define _PAGE_ACCESSED 0x100 /* R: page referenced */
+#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
+#define _PAGE_RW 0x400 /* software: user write access allowed */
+#define _PAGE_SPECIAL 0x800 /* software: Special page */
+
+#ifdef CONFIG_PTE_64BIT
+/* We never clear the high word of the pte */
+#define _PTE_NONE_MASK (0xffffffff00000000ULL | _PAGE_HASHPTE)
+#else
+#define _PTE_NONE_MASK _PAGE_HASHPTE
+#endif
+
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+
+/* Hash table based platforms need atomic updates of the linux PTE */
+#define PTE_ATOMIC_UPDATES 1
+
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_HASH32_H */
diff --git a/arch/powerpc/include/asm/pte-hash64-4k.h b/arch/powerpc/include/asm/pte-hash64-4k.h
new file mode 100644
index 0000000..29fdc15
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-hash64-4k.h
@@ -0,0 +1,20 @@
+/* To be include by pgtable-hash64.h only */
+
+/* PTE bits */
+#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */
+#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
+#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */
+#define _PAGE_F_SECOND _PAGE_SECONDARY
+#define _PAGE_F_GIX _PAGE_GROUP_IX
+#define _PAGE_SPECIAL 0x10000 /* software: special page */
+
+/* There is no 4K PFN hack on 4K pages */
+#define _PAGE_4K_PFN 0
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
+ _PAGE_SECONDARY | _PAGE_GROUP_IX)
+
+/* shift to put page number into pte */
+#define PTE_RPN_SHIFT (17)
+
diff --git a/arch/powerpc/include/asm/pgtable-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
similarity index 73%
rename from arch/powerpc/include/asm/pgtable-64k.h
rename to arch/powerpc/include/asm/pte-hash64-64k.h
index 7389003..e05d26f 100644
--- a/arch/powerpc/include/asm/pgtable-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -1,22 +1,80 @@
-#ifndef _ASM_POWERPC_PGTABLE_64K_H
-#define _ASM_POWERPC_PGTABLE_64K_H
+/* To be include by pgtable-hash64.h only */
-#include <asm-generic/pgtable-nopud.h>
+/* Additional PTE bits (don't change without checking asm in hash_low.S) */
+#define _PAGE_SPECIAL 0x00000400 /* software: special page */
+#define _PAGE_HPTE_SUB 0x0ffff000 /* combo only: sub pages HPTE bits */
+#define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */
+#define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */
+#define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */
+/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
+ * we set that to be the whole sub-bits mask. The C code will only
+ * test this, so a multi-bit mask will work. For combo pages, this
+ * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
+ * all the sub bits. For real 64k pages, we now have the assembly set
+ * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
+ * that mask. This is fine as long as the HIDX bits are never set on
+ * a PTE that isn't hashed, which is the case today.
+ *
+ * A little nit is for the huge page C code, which does the hashing
+ * in C, we need to provide which bit to use.
+ */
+#define _PAGE_HASHPTE _PAGE_HPTE_SUB
-#define PTE_INDEX_SIZE 12
-#define PMD_INDEX_SIZE 12
-#define PUD_INDEX_SIZE 0
-#define PGD_INDEX_SIZE 4
+/* Note the full page bits must be in the same location as for normal
+ * 4k pages as the same asssembly will be used to insert 64K pages
+ * wether the kernel has CONFIG_PPC_64K_PAGES or not
+ */
+#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */
+#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
+
+/* Shift to put page number into pte.
+ *
+ * That gives us a max RPN of 34 bits, which means a max of 50 bits
+ * of addressable physical space, or 46 bits for the special 4k PFNs.
+ */
+#define PTE_RPN_SHIFT (30)
#ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE)
-#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE)
-#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE)
-#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE)
-#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE)
+/*
+ * With 64K pages on hash table, we have a special PTE format that
+ * uses a second "half" of the page table to encode sub-page information
+ * in order to deal with 64K made of 4K HW pages. Thus we override the
+ * generic accessors and iterators here
+ */
+#define __real_pte(e,p) ((real_pte_t) { \
+ (e), pte_val(*((p) + PTRS_PER_PTE)) })
+#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
+ (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
+#define __rpte_to_pte(r) ((r).pte)
+#define __rpte_sub_valid(rpte, index) \
+ (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
+
+/* Trick: we set __end to va + 64k, which happens works for
+ * a 16M page as well as we want only one iteration
+ */
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \
+ do { \
+ unsigned long __end = va + PAGE_SIZE; \
+ unsigned __split = (psize == MMU_PAGE_4K || \
+ psize == MMU_PAGE_64K_AP); \
+ shift = mmu_psize_defs[psize].shift; \
+ for (index = 0; va < __end; index++, va += (1L << shift)) { \
+ if (!__split || __rpte_sub_valid(rpte, index)) do { \
+
+#define pte_iterate_hashed_end() } while(0); } } while(0)
+
+#define pte_pagesize_index(mm, addr, pte) \
+ (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
+
+#define remap_4k_pfn(vma, addr, pfn, prot) \
+ remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \
+ __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
+
#ifdef CONFIG_PPC_SUBPAGE_PROT
/*
@@ -55,101 +113,3 @@
}
#endif /* CONFIG_PPC_SUBPAGE_PROT */
#endif /* __ASSEMBLY__ */
-
-/* With 4k base page size, hugepage PTEs go at the PMD level */
-#define MIN_HUGEPTE_SHIFT PAGE_SHIFT
-
-/* PMD_SHIFT determines what a second-level page table entry can map */
-#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE)
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE)
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/* Additional PTE bits (don't change without checking asm in hash_low.S) */
-#define __HAVE_ARCH_PTE_SPECIAL
-#define _PAGE_SPECIAL 0x00000400 /* software: special page */
-#define _PAGE_HPTE_SUB 0x0ffff000 /* combo only: sub pages HPTE bits */
-#define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */
-#define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */
-#define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */
-
-/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
- * we set that to be the whole sub-bits mask. The C code will only
- * test this, so a multi-bit mask will work. For combo pages, this
- * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
- * all the sub bits. For real 64k pages, we now have the assembly set
- * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
- * that mask. This is fine as long as the HIDX bits are never set on
- * a PTE that isn't hashed, which is the case today.
- *
- * A little nit is for the huge page C code, which does the hashing
- * in C, we need to provide which bit to use.
- */
-#define _PAGE_HASHPTE _PAGE_HPTE_SUB
-
-/* Note the full page bits must be in the same location as for normal
- * 4k pages as the same asssembly will be used to insert 64K pages
- * wether the kernel has CONFIG_PPC_64K_PAGES or not
- */
-#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */
-#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
-
-/* Shift to put page number into pte.
- *
- * That gives us a max RPN of 34 bits, which means a max of 50 bits
- * of addressable physical space, or 46 bits for the special 4k PFNs.
- */
-#define PTE_RPN_SHIFT (30)
-#define PTE_RPN_MAX (1UL << (64 - PTE_RPN_SHIFT))
-#define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1))
-
-/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
- * pgprot changes
- */
-#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
- _PAGE_ACCESSED | _PAGE_SPECIAL)
-
-/* Bits to mask out from a PMD to get to the PTE page */
-#define PMD_MASKED_BITS 0x1ff
-/* Bits to mask out from a PGD/PUD to get to the PMD page */
-#define PUD_MASKED_BITS 0x1ff
-
-/* Manipulate "rpte" values */
-#define __real_pte(e,p) ((real_pte_t) { \
- (e), pte_val(*((p) + PTRS_PER_PTE)) })
-#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
- (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
-#define __rpte_to_pte(r) ((r).pte)
-#define __rpte_sub_valid(rpte, index) \
- (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
-
-
-/* Trick: we set __end to va + 64k, which happens works for
- * a 16M page as well as we want only one iteration
- */
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \
- do { \
- unsigned long __end = va + PAGE_SIZE; \
- unsigned __split = (psize == MMU_PAGE_4K || \
- psize == MMU_PAGE_64K_AP); \
- shift = mmu_psize_defs[psize].shift; \
- for (index = 0; va < __end; index++, va += (1L << shift)) { \
- if (!__split || __rpte_sub_valid(rpte, index)) do { \
-
-#define pte_iterate_hashed_end() } while(0); } } while(0)
-
-#define pte_pagesize_index(mm, addr, pte) \
- (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
-
-#define remap_4k_pfn(vma, addr, pfn, prot) \
- remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \
- __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
-
-#endif /* _ASM_POWERPC_PGTABLE_64K_H */
diff --git a/arch/powerpc/include/asm/pte-hash64.h b/arch/powerpc/include/asm/pte-hash64.h
new file mode 100644
index 0000000..6276663
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-hash64.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_POWERPC_PTE_HASH64_H
+#define _ASM_POWERPC_PTE_HASH64_H
+#ifdef __KERNEL__
+
+/*
+ * Common bits between 4K and 64K pages in a linux-style PTE.
+ * These match the bits in the (hardware-defined) PowerPC PTE as closely
+ * as possible. Additional bits may be defined in pgtable-hash64-*.h
+ */
+#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */
+#define _PAGE_USER 0x0002 /* matches one of the PP bits */
+#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */
+#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */
+#define _PAGE_GUARDED 0x0008
+#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */
+#define _PAGE_DIRTY 0x0080 /* C: page changed */
+#define _PAGE_ACCESSED 0x0100 /* R: page referenced */
+#define _PAGE_RW 0x0200 /* software: user write access allowed */
+#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */
+
+/* Strong Access Ordering */
+#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
+
+#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
+
+#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY)
+
+/* PTEIDX nibble */
+#define _PTEIDX_SECONDARY 0x8
+#define _PTEIDX_GROUP_IX 0x7
+
+#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | \
+ _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
+ _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
+ _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
+
+
+#ifdef CONFIG_PPC_64K_PAGES
+#include <asm/pte-hash64-64k.h>
+#else
+#include <asm/pte-hash64-4k.h>
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PTE_HASH64_H */
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index 6418cee..cd21e5e 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -15,6 +15,7 @@
#include <linux/init.h>
extern void (*udbg_putc)(char c);
+extern void (*udbg_flush)(void);
extern int (*udbg_getc)(void);
extern int (*udbg_getc_poll)(void);
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index dfec3d2..71901fb 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -75,7 +75,7 @@
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
+obj-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 6388386..ccea243 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -731,6 +731,8 @@
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
+ .oprofile_cpu_type = "ppc/750",
+ .oprofile_type = PPC_OPROFILE_G4,
},
{ /* 750FX rev 2.0 must disable HID0[DPM] */
.pvr_mask = 0xffffffff,
@@ -746,6 +748,8 @@
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
+ .oprofile_cpu_type = "ppc/750",
+ .oprofile_type = PPC_OPROFILE_G4,
},
{ /* 750FX (All revs except 2.0) */
.pvr_mask = 0xffff0000,
@@ -761,6 +765,8 @@
.cpu_setup = __setup_cpu_750fx,
.machine_check = machine_check_generic,
.platform = "ppc750",
+ .oprofile_cpu_type = "ppc/750",
+ .oprofile_type = PPC_OPROFILE_G4,
},
{ /* 750GX */
.pvr_mask = 0xffff0000,
@@ -776,6 +782,8 @@
.cpu_setup = __setup_cpu_750fx,
.machine_check = machine_check_generic,
.platform = "ppc750",
+ .oprofile_cpu_type = "ppc/750",
+ .oprofile_type = PPC_OPROFILE_G4,
},
{ /* 740/750 (L2CR bit need fixup for 740) */
.pvr_mask = 0xffff0000,
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index a1c4cfd..f8c2e6b 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -108,18 +108,21 @@
* because OF may have I/O devices mapped into that area
* (particularly on CHRP).
*/
-#ifdef CONFIG_PPC_MULTIPLATFORM
cmpwi 0,r5,0
beq 1f
+#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
/* find out where we are now */
bcl 20,31,$+4
0: mflr r8 /* r8 = runtime addr here */
addis r8,r8,(_stext - 0b)@ha
addi r8,r8,(_stext - 0b)@l /* current runtime base addr */
bl prom_init
+#endif /* CONFIG_PPC_OF_BOOT_TRAMPOLINE */
+
+ /* We never return. We also hit that trap if trying to boot
+ * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
trap
-#endif
/*
* Check for BootX signature when supporting PowerMac and branch to
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index ebaedaf..50ef505 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1360,6 +1360,7 @@
b .__after_prom_start
_INIT_STATIC(__boot_from_prom)
+#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
/* Save parameters */
mr r31,r3
mr r30,r4
@@ -1390,7 +1391,10 @@
/* Do all of the interaction with OF client interface */
mr r8,r26
bl .prom_init
- /* We never return */
+#endif /* #CONFIG_PPC_OF_BOOT_TRAMPOLINE */
+
+ /* We never return. We also hit that trap if trying to boot
+ * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
trap
_STATIC(__after_prom_start)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 23b8b5e..48ea200 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -171,7 +171,7 @@
{
int i = *(loff_t *)v, j;
struct irqaction *action;
- irq_desc_t *desc;
+ struct irq_desc *desc;
unsigned long flags;
if (i == 0) {
@@ -1038,7 +1038,7 @@
static int virq_debug_show(struct seq_file *m, void *private)
{
unsigned long flags;
- irq_desc_t *desc;
+ struct irq_desc *desc;
const char *p;
char none[] = "none";
int i;
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 2ad1731..2603f20 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1482,7 +1482,7 @@
* we proceed to assigning things that were left unassigned
*/
if (!(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) {
- pr_debug("PCI: Assigning unassigned resouces...\n");
+ pr_debug("PCI: Assigning unassigned resources...\n");
pci_assign_unassigned_resources();
}
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 7f1b33d..4d5ebb4 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2283,6 +2283,8 @@
*/
prom_init_stdout();
+ prom_printf("Preparing to boot %s", PTRRELOC((char *)linux_banner));
+
/*
* Get default machine type. At this point, we do not differentiate
* between pSeries SMP and pSeries LPAR
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index ea3a2ec..1ac136b 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,7 @@
_end enter_prom memcpy memset reloc_offset __secondary_hold
__secondary_hold_acknowledge __secondary_hold_spinloop __start
strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2 kernstart_addr memstart_addr"
+reloc_got2 kernstart_addr memstart_addr linux_banner"
NM="$1"
OBJ="$2"
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 7d6c9bb..fc9af47 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -18,6 +18,7 @@
#include <asm/udbg.h>
void (*udbg_putc)(char c);
+void (*udbg_flush)(void);
int (*udbg_getc)(void);
int (*udbg_getc_poll)(void);
@@ -76,6 +77,9 @@
while ((c = *s++) != '\0')
udbg_putc(c);
}
+
+ if (udbg_flush)
+ udbg_flush();
}
#if 0
else {
@@ -98,6 +102,9 @@
}
}
+ if (udbg_flush)
+ udbg_flush();
+
return n - remain;
}
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 7b7da8c..0362a89 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -48,14 +48,21 @@
static struct NS16550 __iomem *udbg_comport;
-static void udbg_550_putc(char c)
+static void udbg_550_flush(void)
{
if (udbg_comport) {
while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
- out_8(&udbg_comport->thr, c);
+ }
+}
+
+static void udbg_550_putc(char c)
+{
+ if (udbg_comport) {
if (c == '\n')
udbg_550_putc('\r');
+ udbg_550_flush();
+ out_8(&udbg_comport->thr, c);
}
}
@@ -108,6 +115,7 @@
/* Clear & enable FIFOs */
out_8(&udbg_comport->fcr ,0x07);
udbg_putc = udbg_550_putc;
+ udbg_flush = udbg_550_flush;
udbg_getc = udbg_550_getc;
udbg_getc_poll = udbg_550_getc_poll;
}
@@ -149,14 +157,21 @@
}
#ifdef CONFIG_PPC_MAPLE
-void udbg_maple_real_putc(char c)
+void udbg_maple_real_flush(void)
{
if (udbg_comport) {
while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
- real_writeb(c, &udbg_comport->thr); eieio();
+ }
+}
+
+void udbg_maple_real_putc(char c)
+{
+ if (udbg_comport) {
if (c == '\n')
udbg_maple_real_putc('\r');
+ udbg_maple_real_flush();
+ real_writeb(c, &udbg_comport->thr); eieio();
}
}
@@ -165,20 +180,28 @@
udbg_comport = (struct NS16550 __iomem *)0xf40003f8;
udbg_putc = udbg_maple_real_putc;
+ udbg_flush = udbg_maple_real_flush;
udbg_getc = NULL;
udbg_getc_poll = NULL;
}
#endif /* CONFIG_PPC_MAPLE */
#ifdef CONFIG_PPC_PASEMI
-void udbg_pas_real_putc(char c)
+void udbg_pas_real_flush(void)
{
if (udbg_comport) {
while ((real_205_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
- real_205_writeb(c, &udbg_comport->thr); eieio();
+ }
+}
+
+void udbg_pas_real_putc(char c)
+{
+ if (udbg_comport) {
if (c == '\n')
udbg_pas_real_putc('\r');
+ udbg_pas_real_flush();
+ real_205_writeb(c, &udbg_comport->thr); eieio();
}
}
@@ -187,6 +210,7 @@
udbg_comport = (struct NS16550 __iomem *)0xfcff03f8UL;
udbg_putc = udbg_pas_real_putc;
+ udbg_flush = udbg_pas_real_flush;
udbg_getc = NULL;
udbg_getc_poll = NULL;
}
@@ -195,14 +219,21 @@
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
#include <platforms/44x/44x.h>
-static void udbg_44x_as1_putc(char c)
+static int udbg_44x_as1_flush(void)
{
if (udbg_comport) {
while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
- as1_writeb(c, &udbg_comport->thr); eieio();
+ }
+}
+
+static void udbg_44x_as1_putc(char c)
+{
+ if (udbg_comport) {
if (c == '\n')
udbg_44x_as1_putc('\r');
+ udbg_44x_as1_flush();
+ as1_writeb(c, &udbg_comport->thr); eieio();
}
}
@@ -222,19 +253,27 @@
(struct NS16550 __iomem *)PPC44x_EARLY_DEBUG_VIRTADDR;
udbg_putc = udbg_44x_as1_putc;
+ udbg_flush = udbg_44x_as1_flush;
udbg_getc = udbg_44x_as1_getc;
}
#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
#ifdef CONFIG_PPC_EARLY_DEBUG_40x
-static void udbg_40x_real_putc(char c)
+static void udbg_40x_real_flush(void)
{
if (udbg_comport) {
while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
- real_writeb(c, &udbg_comport->thr); eieio();
+ }
+}
+
+static void udbg_40x_real_putc(char c)
+{
+ if (udbg_comport) {
if (c == '\n')
udbg_40x_real_putc('\r');
+ udbg_40x_real_flush();
+ real_writeb(c, &udbg_comport->thr); eieio();
}
}
@@ -254,6 +293,7 @@
CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR;
udbg_putc = udbg_40x_real_putc;
+ udbg_flush = udbg_40x_real_flush;
udbg_getc = udbg_40x_real_getc;
udbg_getc_poll = NULL;
}
diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile
index f9e506a..0c16ab9 100644
--- a/arch/powerpc/math-emu/Makefile
+++ b/arch/powerpc/math-emu/Makefile
@@ -1,6 +1,4 @@
-obj-y := math.o fmr.o lfd.o stfd.o
-
obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \
fctiw.o fctiwz.o fdiv.o fdivs.o \
fmadd.o fmadds.o fmsub.o fmsubs.o \
@@ -9,7 +7,8 @@
fres.o frsp.o frsqrte.o fsel.o lfs.o \
fsqrt.o fsqrts.o fsub.o fsubs.o \
mcrfs.o mffs.o mtfsb0.o mtfsb1.o \
- mtfsf.o mtfsfi.o stfiwx.o stfs.o
+ mtfsf.o mtfsfi.o stfiwx.o stfs.o \
+ math.o fmr.o lfd.o stfd.o
obj-$(CONFIG_SPE) += math_efp.o
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 953cc4a..6d2838f 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -6,7 +6,7 @@
EXTRA_CFLAGS += -mno-minimal-toc
endif
-obj-y := fault.o mem.o pgtable.o \
+obj-y := fault.o mem.o pgtable.o gup.o \
init_$(CONFIG_WORD_SIZE).o \
pgtable_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \
@@ -14,7 +14,7 @@
hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC64) += hash_utils_64.o \
slb_low.o slb.o stab.o \
- gup.o mmap.o $(hash-y)
+ mmap.o $(hash-y)
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o
obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \
tlb_hash$(CONFIG_WORD_SIZE).o \
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index 28a114d..bc400c7 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -14,6 +14,8 @@
#include <linux/rwsem.h>
#include <asm/pgtable.h>
+#ifdef __HAVE_ARCH_PTE_SPECIAL
+
/*
* The performance critical leaf functions are made noinline otherwise gcc
* inlines everything into a single function which results in too much
@@ -151,8 +153,11 @@
unsigned long addr, len, end;
unsigned long next;
pgd_t *pgdp;
- int psize, nr = 0;
+ int nr = 0;
+#ifdef CONFIG_PPC64
unsigned int shift;
+ int psize;
+#endif
pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
@@ -205,8 +210,13 @@
*/
local_irq_disable();
+#ifdef CONFIG_PPC64
+ /* Those bits are related to hugetlbfs implementation and only exist
+ * on 64-bit for now
+ */
psize = get_slice_psize(mm, addr);
shift = mmu_psize_defs[psize].shift;
+#endif /* CONFIG_PPC64 */
#ifdef CONFIG_HUGETLB_PAGE
if (unlikely(mmu_huge_psizes[psize])) {
@@ -236,7 +246,9 @@
do {
pgd_t pgd = *pgdp;
+#ifdef CONFIG_PPC64
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
+#endif
pr_debug(" %016lx: normal pgd %p\n", addr,
(void *)pgd_val(pgd));
next = pgd_addr_end(addr, end);
@@ -279,3 +291,5 @@
return ret;
}
}
+
+#endif /* __HAVE_ARCH_PTE_SPECIAL */
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 326852c..4dac9b0 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -12,7 +12,7 @@
config MPC5121_ADS
bool "Freescale MPC5121E ADS"
- depends on PPC_MULTIPLATFORM && PPC32
+ depends on 6xx
select DEFAULT_UIMAGE
select PPC_MPC5121
select MPC5121_ADS_CPLD
@@ -21,7 +21,7 @@
config MPC5121_GENERIC
bool "Generic support for simple MPC5121 based boards"
- depends on PPC_MULTIPLATFORM && PPC32
+ depends on 6xx
select DEFAULT_UIMAGE
select PPC_MPC5121
help
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 75f82ab..8b8e956 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -1,6 +1,6 @@
config PPC_MPC52xx
bool "52xx-based boards"
- depends on PPC_MULTIPLATFORM && PPC32
+ depends on 6xx
select PPC_CLOCK
select PPC_PCI_CHOICE
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 30f008b..7c7df400 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -1,6 +1,6 @@
menuconfig PPC_82xx
bool "82xx-based boards (PQ II)"
- depends on 6xx && PPC_MULTIPLATFORM
+ depends on 6xx
if PPC_82xx
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 83c664a..437d29a 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -1,6 +1,6 @@
menuconfig PPC_83xx
bool "83xx-based boards"
- depends on 6xx && PPC_MULTIPLATFORM
+ depends on 6xx
select PPC_UDBG_16550
select PPC_PCI_CHOICE
select FSL_PCI if PCI
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 81cee7b..66f2923 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -106,8 +106,6 @@
cpm2_pic_init(np);
of_node_put(np);
set_irq_chained_handler(irq, cpm2_cascade);
-
- setup_irq(0, NULL);
#endif
}
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 79a0df1..cc0b0db 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -21,6 +21,7 @@
#include <asm/page.h>
#include <asm/mpic.h>
#include <asm/cacheflush.h>
+#include <asm/dbell.h>
#include <sysdev/fsl_soc.h>
@@ -80,10 +81,8 @@
}
static void __init
-smp_85xx_setup_cpu(int cpu_nr)
+smp_85xx_basic_setup(int cpu_nr)
{
- mpic_setup_this_cpu();
-
/* Clear any pending timer interrupts */
mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
@@ -91,15 +90,43 @@
mtspr(SPRN_TCR, TCR_DIE);
}
+static void __init
+smp_85xx_setup_cpu(int cpu_nr)
+{
+ mpic_setup_this_cpu();
+
+ smp_85xx_basic_setup(cpu_nr);
+}
+
struct smp_ops_t smp_85xx_ops = {
- .message_pass = smp_mpic_message_pass,
- .probe = smp_mpic_probe,
.kick_cpu = smp_85xx_kick_cpu,
- .setup_cpu = smp_85xx_setup_cpu,
};
-void __init
-mpc85xx_smp_init(void)
+static int __init smp_dummy_probe(void)
{
+ return NR_CPUS;
+}
+
+void __init mpc85xx_smp_init(void)
+{
+ struct device_node *np;
+
+ smp_85xx_ops.message_pass = NULL;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (np) {
+ smp_85xx_ops.probe = smp_mpic_probe;
+ smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
+ smp_85xx_ops.message_pass = smp_mpic_message_pass;
+ } else {
+ smp_85xx_ops.probe = smp_dummy_probe;
+ smp_85xx_ops.setup_cpu = smp_85xx_basic_setup;
+ }
+
+ if (cpu_has_feature(CPU_FTR_DBELL))
+ smp_85xx_ops.message_pass = smp_dbell_message_pass;
+
+ BUG_ON(!smp_85xx_ops.message_pass);
+
smp_ops = &smp_85xx_ops;
}
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index fa276c6..fdaf4dd 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -1,7 +1,7 @@
config PPC_86xx
menuconfig PPC_86xx
bool "86xx-based boards"
- depends on 6xx && PPC_MULTIPLATFORM
+ depends on 6xx
select FSL_SOC
select ALTIVEC
help
@@ -31,6 +31,14 @@
help
This option enables support for the MPC8610 HPCD board.
+config GEF_PPC9A
+ bool "GE Fanuc PPC9A"
+ select DEFAULT_UIMAGE
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ This option enables support for GE Fanuc's PPC9A.
+
config GEF_SBC310
bool "GE Fanuc SBC310"
select DEFAULT_UIMAGE
@@ -56,7 +64,7 @@
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
- default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310
+ default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
config MPC8610
bool
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 7c080da..4b0d7b1 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -10,3 +10,4 @@
gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o
obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o $(gef-gpio-y)
obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o gef_pic.o $(gef-gpio-y)
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
new file mode 100644
index 0000000..830fd9a
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -0,0 +1,223 @@
+/*
+ * GE Fanuc PPC9A board support
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+#include "gef_pic.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG (fmt...) do { printk(KERN_ERR "PPC9A: " fmt); } while (0)
+#else
+#define DBG (fmt...) do { } while (0)
+#endif
+
+void __iomem *ppc9a_regs;
+
+static void __init gef_ppc9a_init_irq(void)
+{
+ struct device_node *cascade_node = NULL;
+
+ mpc86xx_init_irq();
+
+ /*
+ * There is a simple interrupt handler in the main FPGA, this needs
+ * to be cascaded into the MPIC
+ */
+ cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic-1.00");
+ if (!cascade_node) {
+ printk(KERN_WARNING "PPC9A: No FPGA PIC\n");
+ return;
+ }
+
+ gef_pic_init(cascade_node);
+ of_node_put(cascade_node);
+}
+
+static void __init gef_ppc9a_setup_arch(void)
+{
+ struct device_node *regs;
+#ifdef CONFIG_PCI
+ struct device_node *np;
+
+ for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
+ fsl_add_bridge(np, 1);
+ }
+#endif
+
+ printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n");
+
+#ifdef CONFIG_SMP
+ mpc86xx_smp_init();
+#endif
+
+ /* Remap basic board registers */
+ regs = of_find_compatible_node(NULL, NULL, "gef,ppc9a-fpga-regs");
+ if (regs) {
+ ppc9a_regs = of_iomap(regs, 0);
+ if (ppc9a_regs == NULL)
+ printk(KERN_WARNING "Unable to map board registers\n");
+ of_node_put(regs);
+ }
+}
+
+/* Return the PCB revision */
+static unsigned int gef_ppc9a_get_pcb_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(ppc9a_regs);
+ return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int gef_ppc9a_get_board_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(ppc9a_regs);
+ return (reg >> 16) & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int gef_ppc9a_get_fpga_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(ppc9a_regs);
+ return (reg >> 24) & 0xf;
+}
+
+static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
+{
+ uint svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+
+ seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
+ ('A' + gef_ppc9a_get_board_rev() - 1));
+ seq_printf(m, "FPGA Revision\t: %u\n", gef_ppc9a_get_fpga_rev());
+
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+}
+
+static void __init gef_ppc9a_nec_fixup(struct pci_dev *pdev)
+{
+ unsigned int val;
+
+ /* Do not do the fixup on other platforms! */
+ if (!machine_is(gef_ppc9a))
+ return;
+
+ printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
+
+ /* Ensure ports 1, 2, 3, 4 & 5 are enabled */
+ pci_read_config_dword(pdev, 0xe0, &val);
+ pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
+
+ /* System clock is 48-MHz Oscillator and EHCI Enabled. */
+ pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+ gef_ppc9a_nec_fixup);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ *
+ * This function is called to determine whether the BSP is compatible with the
+ * supplied device-tree, which is assumed to be the correct one for the actual
+ * board. It is expected thati, in the future, a kernel may support multiple
+ * boards.
+ */
+static int __init gef_ppc9a_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "gef,ppc9a"))
+ return 1;
+
+ return 0;
+}
+
+static long __init mpc86xx_time_init(void)
+{
+ unsigned int temp;
+
+ /* Set the time base to zero */
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, 0);
+
+ temp = mfspr(SPRN_HID0);
+ temp |= HID0_TBEN;
+ mtspr(SPRN_HID0, temp);
+ asm volatile("isync");
+
+ return 0;
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ printk(KERN_DEBUG "Probe platform devices\n");
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
+
+define_machine(gef_ppc9a) {
+ .name = "GE Fanuc PPC9A",
+ .probe = gef_ppc9a_probe,
+ .setup_arch = gef_ppc9a_setup_arch,
+ .init_IRQ = gef_ppc9a_init_irq,
+ .show_cpuinfo = gef_ppc9a_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .time_init = mpc86xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 0f20172..ba3ce43 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -153,6 +153,10 @@
{
unsigned int val;
+ /* Do not do the fixup on other platforms! */
+ if (!machine_is(gef_sbc310))
+ return;
+
printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
/* Ensure only ports 1 & 2 are enabled */
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index b4ab372..68b9b8f 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -1,14 +1,5 @@
menu "Platform support"
-config PPC_MULTIPLATFORM
- bool
- depends on PPC64 || 6xx
- default y
-
-config CLASSIC32
- def_bool y
- depends on 6xx && PPC_MULTIPLATFORM
-
source "arch/powerpc/platforms/pseries/Kconfig"
source "arch/powerpc/platforms/iseries/Kconfig"
source "arch/powerpc/platforms/chrp/Kconfig"
@@ -32,12 +23,24 @@
config PPC_NATIVE
bool
- depends on PPC_MULTIPLATFORM
+ depends on 6xx || PPC64
help
Support for running natively on the hardware, i.e. without
a hypervisor. This option is not user-selectable but should
be selected by all platforms that need it.
+config PPC_OF_BOOT_TRAMPOLINE
+ bool "Support booting from Open Firmware or yaboot"
+ depends on 6xx || PPC64
+ default y
+ help
+ Support from booting from Open Firmware or yaboot using an
+ Open Firmware client interface. This enables the kernel to
+ communicate with open firmware to retrieve system informations
+ such as the device tree.
+
+ In case of doubt, say Y
+
config UDBG_RTAS_CONSOLE
bool "RTAS based debug console"
depends on PPC_RTAS
@@ -71,7 +74,7 @@
config U3_DART
bool
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64
default n
config PPC_RTAS
@@ -188,7 +191,7 @@
config TAU
bool "On-chip CPU temperature sensor support"
- depends on CLASSIC32
+ depends on 6xx
help
G3 and G4 processors have an on-chip temperature sensor called the
'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 9428c0e..9da795e 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -57,9 +57,17 @@
endchoice
+# Until we have a choice of exclusive CPU types on 64-bit, we always
+# use PPC_BOOK3S. On 32-bit, this is equivalent to 6xx which is
+# "classic" MMU
+
+config PPC_BOOK3S
+ def_bool y
+ depends on PPC64 || 6xx
+
config POWER4_ONLY
bool "Optimize for POWER4"
- depends on PPC64
+ depends on PPC64 && PPC_BOOK3S
default n
---help---
Cause the compiler to optimize for POWER4/POWER5/PPC970 processors.
@@ -68,16 +76,16 @@
config POWER3
bool
- depends on PPC64
+ depends on PPC64 && PPC_BOOK3S
default y if !POWER4_ONLY
config POWER4
- depends on PPC64
+ depends on PPC64 && PPC_BOOK3S
def_bool y
config TUNE_CELL
bool "Optimize for Cell Broadband Engine"
- depends on PPC64
+ depends on PPC64 && PPC_BOOK3S
help
Cause the compiler to optimize for the PPE of the Cell Broadband
Engine. This will make the code run considerably faster on Cell
@@ -147,7 +155,7 @@
config ALTIVEC
bool "AltiVec Support"
- depends on CLASSIC32 || POWER4
+ depends on 6xx || POWER4
---help---
This option enables kernel support for the Altivec extensions to the
PowerPC processor. The kernel currently supports saving and restoring
diff --git a/arch/powerpc/platforms/amigaone/Kconfig b/arch/powerpc/platforms/amigaone/Kconfig
index 9276a96..0224767 100644
--- a/arch/powerpc/platforms/amigaone/Kconfig
+++ b/arch/powerpc/platforms/amigaone/Kconfig
@@ -1,6 +1,6 @@
config AMIGAONE
bool "Eyetech AmigaOne/MAI Teron"
- depends on PPC32 && BROKEN_ON_SMP && PPC_MULTIPLATFORM
+ depends on 6xx && BROKEN_ON_SMP
select PPC_I8259
select PPC_INDIRECT_PCI
select PPC_UDBG_16550
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 037f59a..40e24c3 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -23,7 +23,7 @@
config PPC_IBM_CELL_BLADE
bool "IBM Cell Blade"
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
select PPC_CELL_NATIVE
select MMIO_NVRAM
select PPC_UDBG_16550
@@ -31,7 +31,7 @@
config PPC_CELLEB
bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
select PPC_CELL_NATIVE
select HAS_TXX9_SERIAL
select PPC_UDBG_BEAT
@@ -40,9 +40,14 @@
config PPC_CELL_QPACE
bool "IBM Cell - QPACE"
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
select PPC_CELL_COMMON
+config AXON_MSI
+ bool
+ depends on PPC_IBM_CELL_BLADE && PCI_MSI
+ default y
+
menu "Cell Broadband Engine options"
depends on PPC_CELL
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 43eccb2..83fafe9 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -28,7 +28,7 @@
$(spu-manage-y) \
spufs/
-obj-$(CONFIG_PCI_MSI) += axon_msi.o
+obj-$(CONFIG_AXON_MSI) += axon_msi.o
# qpace setup
obj-$(CONFIG_PPC_CELL_QPACE) += qpace_setup.o
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 9e4f273..d6a519e 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -568,16 +568,17 @@
struct spu_lscsa *lscsa = ctx->csa.lscsa;
int ret;
- size = min_t(ssize_t, sizeof lscsa->gprs - *pos, size);
- if (size <= 0)
+ if (*pos >= sizeof(lscsa->gprs))
return -EFBIG;
+
+ size = min_t(ssize_t, sizeof(lscsa->gprs) - *pos, size);
*pos += size;
ret = spu_acquire_saved(ctx);
if (ret)
return ret;
- ret = copy_from_user(lscsa->gprs + *pos - size,
+ ret = copy_from_user((char *)lscsa->gprs + *pos - size,
buffer, size) ? -EFAULT : size;
spu_release_saved(ctx);
@@ -623,10 +624,11 @@
struct spu_lscsa *lscsa = ctx->csa.lscsa;
int ret;
- size = min_t(ssize_t, sizeof(lscsa->fpcr) - *pos, size);
- if (size <= 0)
+ if (*pos >= sizeof(lscsa->fpcr))
return -EFBIG;
+ size = min_t(ssize_t, sizeof(lscsa->fpcr) - *pos, size);
+
ret = spu_acquire_saved(ctx);
if (ret)
return ret;
diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig
index 22b4b4e..37d438b 100644
--- a/arch/powerpc/platforms/chrp/Kconfig
+++ b/arch/powerpc/platforms/chrp/Kconfig
@@ -1,6 +1,6 @@
config PPC_CHRP
bool "Common Hardware Reference Platform (CHRP) based machines"
- depends on PPC_MULTIPLATFORM && PPC32
+ depends on 6xx
select MPIC
select PPC_I8259
select PPC_INDIRECT_PCI
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 4f9f818..291ac9d 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -1,6 +1,6 @@
config EMBEDDED6xx
bool "Embedded 6xx/7xx/7xxx-based boards"
- depends on PPC32 && BROKEN_ON_SMP && PPC_MULTIPLATFORM
+ depends on 6xx && BROKEN_ON_SMP
config LINKSTATION
bool "Linkstation / Kurobox(HG) from Buffalo"
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 7ddd0a2..647e877 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -1,6 +1,6 @@
config PPC_ISERIES
bool "IBM Legacy iSeries"
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
select PPC_INDIRECT_IO
select PPC_PCI_CHOICE if EMBEDDED
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index 701d9297..94f4447 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -214,7 +214,7 @@
unsigned long flags;
for_each_irq (irq) {
- irq_desc_t *desc = get_irq_desc(irq);
+ struct irq_desc *desc = get_irq_desc(irq);
if (desc && desc->chip && desc->chip->startup) {
spin_lock_irqsave(&desc->lock, flags);
diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig
index a6467a5..1ea621a 100644
--- a/arch/powerpc/platforms/maple/Kconfig
+++ b/arch/powerpc/platforms/maple/Kconfig
@@ -1,5 +1,5 @@
config PPC_MAPLE
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
bool "Maple 970FX Evaluation Board"
select PCI
select MPIC
diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index 348e061..a2aeb32 100644
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -1,5 +1,5 @@
config PPC_PASEMI
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
bool "PA Semi SoC-based platforms"
default n
select MPIC
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
index 055990c..1e1a087 100644
--- a/arch/powerpc/platforms/powermac/Kconfig
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -1,6 +1,6 @@
config PPC_PMAC
bool "Apple PowerMac based machines"
- depends on PPC_MULTIPLATFORM
+ depends on PPC_BOOK3S
select MPIC
select PCI
select PPC_INDIRECT_PCI if PPC32
diff --git a/arch/powerpc/platforms/powermac/pic.h b/arch/powerpc/platforms/powermac/pic.h
index c44c89f..d622a83 100644
--- a/arch/powerpc/platforms/powermac/pic.h
+++ b/arch/powerpc/platforms/powermac/pic.h
@@ -3,7 +3,7 @@
#include <linux/irq.h>
-extern struct hw_interrupt_type pmac_pic;
+extern struct irq_chip pmac_pic;
extern void pmac_pic_init(void);
extern int pmac_get_irq(void);
diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig
index 29d4112..bf8330e 100644
--- a/arch/powerpc/platforms/prep/Kconfig
+++ b/arch/powerpc/platforms/prep/Kconfig
@@ -1,6 +1,6 @@
config PPC_PREP
bool "PowerPC Reference Platform (PReP) based machines"
- depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
+ depends on 6xx && BROKEN
select MPIC
select PPC_I8259
select PPC_INDIRECT_PCI
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 920cf7a..204ae5c 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -1,6 +1,6 @@
config PPC_PS3
bool "Sony PS3"
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
select PPC_CELL
select USB_ARCH_HAS_OHCI
select USB_OHCI_LITTLE_ENDIAN
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index ddc2a30..c0e6ec2 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -1,5 +1,5 @@
config PPC_PSERIES
- depends on PPC_MULTIPLATFORM && PPC64
+ depends on PPC64 && PPC_BOOK3S
bool "IBM pSeries & new (POWER5-based) iSeries"
select MPIC
select PPC_I8259
@@ -25,6 +25,11 @@
depends on PPC_PSERIES && PCI
default y if !EMBEDDED
+config PSERIES_MSI
+ bool
+ depends on PCI_MSI && EEH
+ default y
+
config SCANLOG
tristate "Scanlog dump interface"
depends on RTAS_PROC && PPC_PSERIES
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index dfe574a..0ce691d 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -15,7 +15,7 @@
obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o eeh_sysfs.o
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_PCI) += pci.o pci_dlpar.o
-obj-$(CONFIG_PCI_MSI) += msi.o
+obj-$(CONFIG_PSERIES_MSI) += msi.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 3e0d6ef..bf2e1ac 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -356,6 +356,27 @@
return 0;
}
+static int check_msix_entries(struct pci_dev *pdev)
+{
+ struct msi_desc *entry;
+ int expected;
+
+ /* There's no way for us to express to firmware that we want
+ * a discontiguous, or non-zero based, range of MSI-X entries.
+ * So we must reject such requests. */
+
+ expected = 0;
+ list_for_each_entry(entry, &pdev->msi_list, list) {
+ if (entry->msi_attrib.entry_nr != expected) {
+ pr_debug("rtas_msi: bad MSI-X entries.\n");
+ return -EINVAL;
+ }
+ expected++;
+ }
+
+ return 0;
+}
+
static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
struct pci_dn *pdn;
@@ -367,6 +388,9 @@
if (!pdn)
return -ENODEV;
+ if (type == PCI_CAP_ID_MSIX && check_msix_entries(pdev))
+ return -EINVAL;
+
/*
* Try the new more explicit firmware interface, if that fails fall
* back to the old interface. The old interface is known to never
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 474d176..fd969f0 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -52,6 +52,7 @@
* the communication processor devices.
*/
cpm2_map_t __iomem *cpm2_immr;
+EXPORT_SYMBOL(cpm2_immr);
#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
of space for CPM as it is larger
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index eacfb13..9aa4fe1 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -143,7 +143,7 @@
config HOTPLUG_PCI_RPA
tristate "RPA PCI Hotplug driver"
- depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
+ depends on PPC_PSERIES && EEH && !HOTPLUG_PCI_FAKE
help
Say Y here if you have a RPA system that supports PCI Hotplug.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index c7352f7..ecf52e4 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -772,7 +772,7 @@
config GEF_WDT
tristate "GE Fanuc Watchdog Timer"
- depends on GEF_SBC610 || GEF_SBC310
+ depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
---help---
Watchdog timer found in a number of GE Fanuc single board computers.