| /* |
| * vsp1_wpf.c -- R-Car VSP1 Write Pixel Formatter |
| * |
| * Copyright (C) 2013-2014 Renesas Electronics Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/device.h> |
| |
| #include <media/v4l2-subdev.h> |
| |
| #include "vsp1.h" |
| #include "vsp1_rwpf.h" |
| #include "vsp1_video.h" |
| |
| #define WPF_MAX_WIDTH 2048 |
| #define WPF_MAX_HEIGHT 2048 |
| |
| /* ----------------------------------------------------------------------------- |
| * Device Access |
| */ |
| |
| static inline u32 vsp1_wpf_read(struct vsp1_rwpf *wpf, u32 reg) |
| { |
| return vsp1_read(wpf->entity.vsp1, |
| reg + wpf->entity.index * VI6_WPF_OFFSET); |
| } |
| |
| static inline void vsp1_wpf_write(struct vsp1_rwpf *wpf, u32 reg, u32 data) |
| { |
| vsp1_write(wpf->entity.vsp1, |
| reg + wpf->entity.index * VI6_WPF_OFFSET, data); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Controls |
| */ |
| |
| static int wpf_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct vsp1_rwpf *wpf = |
| container_of(ctrl->handler, struct vsp1_rwpf, ctrls); |
| u32 value; |
| |
| if (!vsp1_entity_is_streaming(&wpf->entity)) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_ALPHA_COMPONENT: |
| value = vsp1_wpf_read(wpf, VI6_WPF_OUTFMT); |
| value &= ~VI6_WPF_OUTFMT_PDV_MASK; |
| value |= ctrl->val << VI6_WPF_OUTFMT_PDV_SHIFT; |
| vsp1_wpf_write(wpf, VI6_WPF_OUTFMT, value); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct v4l2_ctrl_ops wpf_ctrl_ops = { |
| .s_ctrl = wpf_s_ctrl, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 Subdevice Core Operations |
| */ |
| |
| static int wpf_s_stream(struct v4l2_subdev *subdev, int enable) |
| { |
| struct vsp1_pipeline *pipe = to_vsp1_pipeline(&subdev->entity); |
| struct vsp1_rwpf *wpf = to_rwpf(subdev); |
| struct vsp1_device *vsp1 = wpf->entity.vsp1; |
| const struct v4l2_rect *crop = &wpf->crop; |
| unsigned int i; |
| u32 srcrpf = 0; |
| u32 outfmt = 0; |
| int ret; |
| |
| ret = vsp1_entity_set_streaming(&wpf->entity, enable); |
| if (ret < 0) |
| return ret; |
| |
| if (!enable) { |
| vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), 0); |
| vsp1_wpf_write(wpf, VI6_WPF_SRCRPF, 0); |
| return 0; |
| } |
| |
| /* Sources. If the pipeline has a single input and BRU is not used, |
| * configure it as the master layer. Otherwise configure all |
| * inputs as sub-layers and select the virtual RPF as the master |
| * layer. |
| */ |
| for (i = 0; i < pipe->num_inputs; ++i) { |
| struct vsp1_rwpf *input = pipe->inputs[i]; |
| |
| srcrpf |= (!pipe->bru && pipe->num_inputs == 1) |
| ? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index) |
| : VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index); |
| } |
| |
| if (pipe->bru || pipe->num_inputs > 1) |
| srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST; |
| |
| vsp1_wpf_write(wpf, VI6_WPF_SRCRPF, srcrpf); |
| |
| /* Destination stride. */ |
| if (!pipe->lif) { |
| struct v4l2_pix_format_mplane *format = &wpf->video.format; |
| |
| vsp1_wpf_write(wpf, VI6_WPF_DSTM_STRIDE_Y, |
| format->plane_fmt[0].bytesperline); |
| if (format->num_planes > 1) |
| vsp1_wpf_write(wpf, VI6_WPF_DSTM_STRIDE_C, |
| format->plane_fmt[1].bytesperline); |
| } |
| |
| vsp1_wpf_write(wpf, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN | |
| (crop->left << VI6_WPF_SZCLIP_OFST_SHIFT) | |
| (crop->width << VI6_WPF_SZCLIP_SIZE_SHIFT)); |
| vsp1_wpf_write(wpf, VI6_WPF_VSZCLIP, VI6_WPF_SZCLIP_EN | |
| (crop->top << VI6_WPF_SZCLIP_OFST_SHIFT) | |
| (crop->height << VI6_WPF_SZCLIP_SIZE_SHIFT)); |
| |
| /* Format */ |
| if (!pipe->lif) { |
| const struct vsp1_format_info *fmtinfo = wpf->video.fmtinfo; |
| |
| outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT; |
| |
| if (fmtinfo->alpha) |
| outfmt |= VI6_WPF_OUTFMT_PXA; |
| if (fmtinfo->swap_yc) |
| outfmt |= VI6_WPF_OUTFMT_SPYCS; |
| if (fmtinfo->swap_uv) |
| outfmt |= VI6_WPF_OUTFMT_SPUVS; |
| |
| vsp1_wpf_write(wpf, VI6_WPF_DSWAP, fmtinfo->swap); |
| } |
| |
| if (wpf->entity.formats[RWPF_PAD_SINK].code != |
| wpf->entity.formats[RWPF_PAD_SOURCE].code) |
| outfmt |= VI6_WPF_OUTFMT_CSC; |
| |
| /* Take the control handler lock to ensure that the PDV value won't be |
| * changed behind our back by a set control operation. |
| */ |
| mutex_lock(wpf->ctrls.lock); |
| outfmt |= vsp1_wpf_read(wpf, VI6_WPF_OUTFMT) & VI6_WPF_OUTFMT_PDV_MASK; |
| vsp1_wpf_write(wpf, VI6_WPF_OUTFMT, outfmt); |
| mutex_unlock(wpf->ctrls.lock); |
| |
| vsp1_write(vsp1, VI6_DPR_WPF_FPORCH(wpf->entity.index), |
| VI6_DPR_WPF_FPORCH_FP_WPFN); |
| |
| vsp1_write(vsp1, VI6_WPF_WRBCK_CTRL, 0); |
| |
| /* Enable interrupts */ |
| vsp1_write(vsp1, VI6_WPF_IRQ_STA(wpf->entity.index), 0); |
| vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), |
| VI6_WFP_IRQ_ENB_FREE); |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 Subdevice Operations |
| */ |
| |
| static struct v4l2_subdev_video_ops wpf_video_ops = { |
| .s_stream = wpf_s_stream, |
| }; |
| |
| static struct v4l2_subdev_pad_ops wpf_pad_ops = { |
| .enum_mbus_code = vsp1_rwpf_enum_mbus_code, |
| .enum_frame_size = vsp1_rwpf_enum_frame_size, |
| .get_fmt = vsp1_rwpf_get_format, |
| .set_fmt = vsp1_rwpf_set_format, |
| .get_selection = vsp1_rwpf_get_selection, |
| .set_selection = vsp1_rwpf_set_selection, |
| }; |
| |
| static struct v4l2_subdev_ops wpf_ops = { |
| .video = &wpf_video_ops, |
| .pad = &wpf_pad_ops, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Video Device Operations |
| */ |
| |
| static void wpf_vdev_queue(struct vsp1_video *video, |
| struct vsp1_video_buffer *buf) |
| { |
| struct vsp1_rwpf *wpf = container_of(video, struct vsp1_rwpf, video); |
| |
| vsp1_wpf_write(wpf, VI6_WPF_DSTM_ADDR_Y, buf->addr[0]); |
| if (buf->buf.vb2_buf.num_planes > 1) |
| vsp1_wpf_write(wpf, VI6_WPF_DSTM_ADDR_C0, buf->addr[1]); |
| if (buf->buf.vb2_buf.num_planes > 2) |
| vsp1_wpf_write(wpf, VI6_WPF_DSTM_ADDR_C1, buf->addr[2]); |
| } |
| |
| static const struct vsp1_video_operations wpf_vdev_ops = { |
| .queue = wpf_vdev_queue, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Initialization and Cleanup |
| */ |
| |
| struct vsp1_rwpf *vsp1_wpf_create(struct vsp1_device *vsp1, unsigned int index) |
| { |
| struct v4l2_subdev *subdev; |
| struct vsp1_video *video; |
| struct vsp1_rwpf *wpf; |
| int ret; |
| |
| wpf = devm_kzalloc(vsp1->dev, sizeof(*wpf), GFP_KERNEL); |
| if (wpf == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| wpf->max_width = WPF_MAX_WIDTH; |
| wpf->max_height = WPF_MAX_HEIGHT; |
| |
| wpf->entity.type = VSP1_ENTITY_WPF; |
| wpf->entity.index = index; |
| |
| ret = vsp1_entity_init(vsp1, &wpf->entity, 2); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| |
| /* Initialize the V4L2 subdev. */ |
| subdev = &wpf->entity.subdev; |
| v4l2_subdev_init(subdev, &wpf_ops); |
| |
| subdev->entity.ops = &vsp1_media_ops; |
| subdev->internal_ops = &vsp1_subdev_internal_ops; |
| snprintf(subdev->name, sizeof(subdev->name), "%s wpf.%u", |
| dev_name(vsp1->dev), index); |
| v4l2_set_subdevdata(subdev, wpf); |
| subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| |
| vsp1_entity_init_formats(subdev, NULL); |
| |
| /* Initialize the control handler. */ |
| v4l2_ctrl_handler_init(&wpf->ctrls, 1); |
| v4l2_ctrl_new_std(&wpf->ctrls, &wpf_ctrl_ops, V4L2_CID_ALPHA_COMPONENT, |
| 0, 255, 1, 255); |
| |
| wpf->entity.subdev.ctrl_handler = &wpf->ctrls; |
| |
| if (wpf->ctrls.error) { |
| dev_err(vsp1->dev, "wpf%u: failed to initialize controls\n", |
| index); |
| ret = wpf->ctrls.error; |
| goto error; |
| } |
| |
| /* Initialize the video device. */ |
| video = &wpf->video; |
| |
| video->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| video->vsp1 = vsp1; |
| video->ops = &wpf_vdev_ops; |
| |
| ret = vsp1_video_init(video, &wpf->entity); |
| if (ret < 0) |
| goto error; |
| |
| wpf->entity.video = video; |
| wpf->entity.sink = &wpf->video.video.entity; |
| |
| return wpf; |
| |
| error: |
| vsp1_entity_destroy(&wpf->entity); |
| return ERR_PTR(ret); |
| } |
| |
| /* |
| * vsp1_wpf_create_links() - RPF pads links creation |
| * @vsp1: Pointer to VSP1 device |
| * @entity: Pointer to VSP1 entity |
| * |
| * return negative error code or zero on success |
| */ |
| int vsp1_wpf_create_links(struct vsp1_device *vsp1, |
| struct vsp1_entity *entity) |
| { |
| struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev); |
| unsigned int flags; |
| |
| /* Connect the video device to the WPF. All connections are immutable |
| * except for the WPF0 source link if a LIF is present. |
| */ |
| flags = MEDIA_LNK_FL_ENABLED; |
| if (!(vsp1->pdata.features & VSP1_HAS_LIF) || entity->index != 0) |
| flags |= MEDIA_LNK_FL_IMMUTABLE; |
| |
| return media_create_pad_link(&wpf->entity.subdev.entity, |
| RWPF_PAD_SOURCE, |
| &wpf->video.video.entity, 0, flags); |
| } |