Merge branch 'warning-fixes' into next/fixes-non-critical
These are fixes for compiler warnings that for the most
part were introduced during the 3.8 cycle but are otherwise
harmless.
* warning-fixes:
scripts/sortextable: silence script output
ARM: s3c: i2c: add platform_device forward declaration
ARM: mvebu: allow selecting mvebu without Armada XP
ARM: pick Versatile by default for !MMU
ARM: integrator: fix build with INTEGRATOR_AP off
ARM: integrator/versatile: fix NOMMU warnings
ARM: sa1100: don't warn about mach/ide.h
ARM: shmobile: fix defconfig warning on CONFIG_USB
ARM: w90x900: fix legacy assembly syntax
ARM: samsung: fix assembly syntax for new gas
ARM: disable virt_to_bus/virt_to_bus almost everywhere
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index e97a278..4598a47 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -7,9 +7,9 @@
Required Properties:
- compatible: should be one of the following.
- - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller.
- - "samsung,pinctrl-exynos4x12": for Exynos4x12 compatible pin-controller.
- - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller.
+ - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
+ - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
+ - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
- reg: Base address of the pin controller hardware module and length of
the address space it occupies.
@@ -142,7 +142,7 @@
Example: A pin-controller node with pin banks:
pinctrl_0: pinctrl@11400000 {
- compatible = "samsung,pinctrl-exynos4210";
+ compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
@@ -185,7 +185,7 @@
Example 1: A pin-controller node with pin groups.
pinctrl_0: pinctrl@11400000 {
- compatible = "samsung,pinctrl-exynos4210";
+ compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
@@ -230,7 +230,7 @@
Example 2: A pin-controller node with external wakeup interrupt controller node.
pinctrl_1: pinctrl@11000000 {
- compatible = "samsung,pinctrl-exynos4210";
+ compatible = "samsung,exynos4210-pinctrl";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>
diff --git a/MAINTAINERS b/MAINTAINERS
index 212c255..dec0dd5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1248,12 +1248,17 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-vt8500/
+F: drivers/clocksource/vt8500_timer.c
+F: drivers/gpio/gpio-vt8500.c
+F: drivers/mmc/host/wmt-sdmmc.c
+F: drivers/pwm/pwm-vt8500.c
+F: drivers/rtc/rtc-vt8500.c
+F: drivers/tty/serial/vt8500_serial.c
+F: drivers/usb/host/ehci-vt8500.c
+F: drivers/usb/host/uhci-platform.c
F: drivers/video/vt8500lcdfb.*
F: drivers/video/wm8505fb*
F: drivers/video/wmt_ge_rops.*
-F: drivers/tty/serial/vt8500_serial.c
-F: drivers/rtc/rtc-vt8500.c
-F: drivers/mmc/host/wmt-sdmmc.c
ARM/ZIPIT Z2 SUPPORT
M: Marek Vasut <marek.vasut@gmail.com>
@@ -1262,6 +1267,14 @@
F: arch/arm/mach-pxa/z2.c
F: arch/arm/mach-pxa/include/mach/z2.h
+ARM/ZYNQ ARCHITECTURE
+M: Michal Simek <michal.simek@xilinx.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W: http://wiki.xilinx.com
+T: git git://git.xilinx.com/linux-xlnx.git
+S: Supported
+F: arch/arm/mach-zynq/
+
ARM64 PORT (AARCH64 ARCHITECTURE)
M: Catalin Marinas <catalin.marinas@arm.com>
M: Will Deacon <will.deacon@arm.com>
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 80e29c6..4801717 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -324,8 +324,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>;
interrupts = <5 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
@@ -335,8 +333,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x4000>;
interrupts = <6 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
@@ -346,8 +342,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x4000>;
interrupts = <7 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
@@ -357,8 +351,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf8028000 0x4000>;
interrupts = <8 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 8ecca69..d112c3a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -197,9 +197,9 @@
};
usart3 {
- pinctrl_uart3: usart3-0 {
+ pinctrl_usart3: usart3-0 {
atmel,pins =
- <2 23 0x2 0x1 /* PC22 periph B with pullup */
+ <2 22 0x2 0x1 /* PC22 periph B with pullup */
2 23 0x2 0x0>; /* PC23 periph B */
};
@@ -402,8 +402,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x200>;
interrupts = <5 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
@@ -413,8 +411,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x200>;
interrupts = <6 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
@@ -424,8 +420,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x200>;
interrupts = <7 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 42eac1f..740630f 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -93,6 +93,7 @@
reg = <0xd0400 0x20>;
ngpios = <32>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <12>, <13>, <14>, <60>;
};
@@ -103,6 +104,7 @@
reg = <0xd0420 0x20>;
ngpios = <32>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <61>;
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index e31bfc4..2feffc7 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -48,13 +48,13 @@
};
pinctrl_0: pinctrl@11400000 {
- compatible = "samsung,pinctrl-exynos4210";
+ compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
};
pinctrl_1: pinctrl@11000000 {
- compatible = "samsung,pinctrl-exynos4210";
+ compatible = "samsung,exynos4210-pinctrl";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
@@ -66,7 +66,7 @@
};
pinctrl_2: pinctrl@03860000 {
- compatible = "samsung,pinctrl-exynos4210";
+ compatible = "samsung,exynos4210-pinctrl";
reg = <0x03860000 0x1000>;
};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 179a62e..9a87806 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -37,13 +37,13 @@
};
pinctrl_0: pinctrl@11400000 {
- compatible = "samsung,pinctrl-exynos4x12";
+ compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
};
pinctrl_1: pinctrl@11000000 {
- compatible = "samsung,pinctrl-exynos4x12";
+ compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
@@ -55,14 +55,14 @@
};
pinctrl_2: pinctrl@03860000 {
- compatible = "samsung,pinctrl-exynos4x12";
+ compatible = "samsung,exynos4x12-pinctrl";
reg = <0x03860000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <10 0>;
};
pinctrl_3: pinctrl@106E0000 {
- compatible = "samsung,pinctrl-exynos4x12";
+ compatible = "samsung,exynos4x12-pinctrl";
reg = <0x106E0000 0x1000>;
interrupts = <0 72 0>;
};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 024269d..5f3562a 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -86,7 +86,7 @@
};
pinctrl {
- compatible = "samsung,pinctrl-exynos5440";
+ compatible = "samsung,exynos5440-pinctrl";
reg = <0xE0000 0x1000>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -154,6 +154,6 @@
rtc {
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
- interrupts = <0 16 0>, <0 17 0>;
+ interrupts = <0 17 0>, <0 16 0>;
};
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index d6265ca..ff1205e 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -866,7 +866,7 @@
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
- clocks = <&clks 117>, <&clks 117>, <&clks 177>;
+ clocks = <&clks 117>, <&clks 117>, <&clks 190>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index a3d37ec..7318717 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -70,7 +70,7 @@
compatible = "arm,sp805", "arm,primecell";
status = "disabled";
reg = <0 0x2b060000 0 0x1000>;
- interrupts = <98>;
+ interrupts = <0 98 4>;
clocks = <&oscclk7>;
clock-names = "apb_pclk";
};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index cf8071a..dfe371e 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -72,7 +72,7 @@
wdt@2a490000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0 0x2a490000 0 0x1000>;
- interrupts = <98>;
+ interrupts = <0 98 4>;
clocks = <&oscclk6a>, <&oscclk6a>;
clock-names = "wdogclk", "apb_pclk";
};
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index b5bc96c..cbd91bc 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -33,6 +33,8 @@
CONFIG_MARVELL_PHY=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_MV64XXX=y
CONFIG_SERIAL_8250_DW=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 231dca6..426270f 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -66,9 +66,9 @@
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_AB8500_BM=y
-CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_AB8500_BM is not set
+# CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL is not set
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
CONFIG_MFD_STMPE=y
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
index 4eb6d00..86dff32 100644
--- a/arch/arm/include/asm/smp_scu.h
+++ b/arch/arm/include/asm/smp_scu.h
@@ -7,8 +7,14 @@
#ifndef __ASSEMBLER__
unsigned int scu_get_core_count(void __iomem *);
-void scu_enable(void __iomem *);
int scu_power_mode(void __iomem *, unsigned int);
+
+#ifdef CONFIG_SMP
+void scu_enable(void __iomem *scu_base);
+#else
+static inline void scu_enable(void __iomem *scu_base) {}
+#endif
+
#endif
#endif
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index b9f015e..45eac87 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -75,7 +75,7 @@
int scu_power_mode(void __iomem *scu_base, unsigned int mode)
{
unsigned int val;
- int cpu = cpu_logical_map(smp_processor_id());
+ int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
if (mode > 3 || mode == 1 || cpu > 3)
return -EINVAL;
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 1a89824..0c7e3ad 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -299,6 +299,7 @@
void exynos5_restart(char mode, const char *cmd)
{
+ struct device_node *np;
u32 val;
void __iomem *addr;
@@ -306,8 +307,9 @@
val = 0x1;
addr = EXYNOS_SWRESET;
} else if (of_machine_is_compatible("samsung,exynos5440")) {
- val = (0x10 << 20) | (0x1 << 16);
- addr = EXYNOS5440_SWRESET;
+ np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
+ addr = of_iomap(np, 0) + 0xcc;
+ val = (0xfff << 20) | (0x1 << 16);
} else {
pr_err("%s: cannot support non-DT\n", __func__);
return;
@@ -1031,8 +1033,8 @@
* interrupt support code here can be completely removed.
*/
static const struct of_device_id exynos_pinctrl_ids[] = {
- { .compatible = "samsung,pinctrl-exynos4210", },
- { .compatible = "samsung,pinctrl-exynos4x12", },
+ { .compatible = "samsung,exynos4210-pinctrl", },
+ { .compatible = "samsung,exynos4x12-pinctrl", },
};
struct device_node *pctrl_np, *wkup_np;
const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 981dc1e..e6c0612 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -28,6 +28,7 @@
#include <asm/arch_timer.h>
#include <asm/cacheflush.h>
+#include <asm/cputype.h>
#include <asm/smp_plat.h>
#include <asm/smp_twd.h>
#include <asm/hardware/arm_timer.h>
@@ -59,7 +60,7 @@
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
- cpu = cpu_logical_map(cpu);
+ cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h
index 70af9d1..5995df7 100644
--- a/arch/arm/mach-highbank/sysregs.h
+++ b/arch/arm/mach-highbank/sysregs.h
@@ -37,7 +37,7 @@
static inline void highbank_set_core_pwr(void)
{
- int cpu = cpu_logical_map(smp_processor_id());
+ int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
if (scu_base_addr)
scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
else
@@ -46,7 +46,7 @@
static inline void highbank_clear_core_pwr(void)
{
- int cpu = cpu_logical_map(smp_processor_id());
+ int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
if (scu_base_addr)
scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
else
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 11b1d21..592c168 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -613,7 +613,6 @@
static void __init ap_map_io_atag(void)
{
iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag));
- ap_syscon_base = __io_address(INTEGRATOR_SC_BASE);
ap_map_io();
}
@@ -685,6 +684,7 @@
platform_device_register(&cfi_flash_device);
+ ap_syscon_base = __io_address(INTEGRATOR_SC_BASE);
sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
for (i = 0; i < 4; i++) {
struct lm_device *lmdev;
diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h
index 12da4ca..e8d043a 100644
--- a/arch/arm/mach-msm/proc_comm.h
+++ b/arch/arm/mach-msm/proc_comm.h
@@ -253,6 +253,6 @@
(((drvstr) & 0xF) << 17))
int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
-void __init proc_comm_boot_wait(void);
+void proc_comm_boot_wait(void);
#endif
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 5d3b4f4..8633a43 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -46,7 +46,7 @@
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
-static DEFINE_SPINLOCK(wakeupgen_lock);
+static DEFINE_RAW_SPINLOCK(wakeupgen_lock);
static unsigned int irq_target_cpu[MAX_IRQS];
static unsigned int irq_banks = MAX_NR_REG_BANKS;
static unsigned int max_irqs = MAX_IRQS;
@@ -134,9 +134,9 @@
{
unsigned long flags;
- spin_lock_irqsave(&wakeupgen_lock, flags);
+ raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_clear(d->irq, irq_target_cpu[d->irq]);
- spin_unlock_irqrestore(&wakeupgen_lock, flags);
+ raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
/*
@@ -146,9 +146,9 @@
{
unsigned long flags;
- spin_lock_irqsave(&wakeupgen_lock, flags);
+ raw_spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_set(d->irq, irq_target_cpu[d->irq]);
- spin_unlock_irqrestore(&wakeupgen_lock, flags);
+ raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -189,7 +189,7 @@
{
unsigned long flags;
- spin_lock_irqsave(&wakeupgen_lock, flags);
+ raw_spin_lock_irqsave(&wakeupgen_lock, flags);
if (set) {
_wakeupgen_save_masks(cpu);
_wakeupgen_set_all(cpu, WKG_MASK_ALL);
@@ -197,7 +197,7 @@
_wakeupgen_set_all(cpu, WKG_UNMASK_ALL);
_wakeupgen_restore_masks(cpu);
}
- spin_unlock_irqrestore(&wakeupgen_lock, flags);
+ raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
#endif
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index b8ad6e6..265de51 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -228,7 +228,7 @@
int r = 0;
if (of_have_populated_dt()) {
- np = omap_get_timer_dt(omap_timer_match, NULL);
+ np = omap_get_timer_dt(omap_timer_match, property);
if (!np)
return -ENODEV;
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index e49b40b..6a7aec6 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -23,6 +23,7 @@
#include <linux/i2c.h>
#include <linux/i2c/twl.h>
#include <linux/gpio.h>
+#include <linux/string.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -56,7 +57,7 @@
struct twl4030_platform_data *pmic_data)
{
omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
- strncpy(pmic_i2c_board_info.type, pmic_type,
+ strlcpy(pmic_i2c_board_info.type, pmic_type,
sizeof(pmic_i2c_board_info.type));
pmic_i2c_board_info.irq = pmic_irq;
pmic_i2c_board_info.platform_data = pmic_data;
diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h
index 2d3f14e..714b657 100644
--- a/arch/arm/mach-pxa/include/mach/palmtreo.h
+++ b/arch/arm/mach-pxa/include/mach/palmtreo.h
@@ -38,13 +38,14 @@
#define GPIO_NR_TREO_LCD_POWER 25
/* Treo680 specific GPIOs */
-#ifdef CONFIG_MACH_TREO680
#define GPIO_NR_TREO680_SD_READONLY 33
#define GPIO_NR_TREO680_SD_POWER 42
#define GPIO_NR_TREO680_VIBRATE_EN 44
#define GPIO_NR_TREO680_KEYB_BL 24
#define GPIO_NR_TREO680_BT_EN 43
-#endif /* CONFIG_MACH_TREO680 */
+#define GPIO_NR_TREO680_LCD_POWER 77
+#define GPIO_NR_TREO680_LCD_EN 86
+#define GPIO_NR_TREO680_LCD_EN_N 25
/* Centro685 specific GPIOs */
#define GPIO_NR_CENTRO_SD_POWER 21
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
index b7de471..b802f285 100644
--- a/arch/arm/mach-pxa/include/mach/smemc.h
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -37,6 +37,7 @@
#define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */
#define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */
#define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */
+#define CSMSADRCFG (SMEMC_VIRT + 0xA0) /* Chip Select Configuration Register */
/*
* More handy macros for PCMCIA
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 3f3c48f..5775128 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -98,9 +98,6 @@
GPIO96_KP_MKOUT_6,
GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */
- /* LCD */
- GPIOxx_LCD_TFT_16BPP,
-
/* Quick Capture Interface */
GPIO84_CIF_FV,
GPIO85_CIF_LV,
@@ -140,6 +137,12 @@
/* MATRIX KEYPAD - different wake up source */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO99_KP_MKIN_5,
+
+ /* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */
+ GPIOxx_LCD_16BPP,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
};
#endif /* CONFIG_MACH_TREO680 */
@@ -155,6 +158,9 @@
/* MATRIX KEYPAD - different wake up source */
GPIO100_KP_MKIN_0,
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
};
#endif /* CONFIG_MACH_CENTRO */
@@ -328,7 +334,6 @@
/******************************************************************************
* Vibra and LEDs
******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
static struct gpio_led treo680_gpio_leds[] = {
{
.name = "treo680:vibra:vibra",
@@ -379,21 +384,17 @@
static struct platform_device palmtreo_leds = {
.name = "leds-gpio",
.id = -1,
- .dev = {
- .platform_data = &treo680_gpio_led_info,
- }
};
static void __init palmtreo_leds_init(void)
{
if (machine_is_centro())
palmtreo_leds.dev.platform_data = ¢ro_gpio_led_info;
+ else if (machine_is_treo680())
+ palmtreo_leds.dev.platform_data = &treo680_gpio_led_info;
platform_device_register(&palmtreo_leds);
}
-#else
-static inline void palmtreo_leds_init(void) {}
-#endif
/******************************************************************************
* Machine init
@@ -424,10 +425,59 @@
}
#ifdef CONFIG_MACH_TREO680
+void __init treo680_gpio_init(void)
+{
+ unsigned int gpio;
+
+ /* drive all three lcd gpios high initially */
+ const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT;
+
+ /*
+ * LCD GPIO initialization...
+ */
+
+ /*
+ * This is likely the power to the lcd. Toggling it low/high appears to
+ * turn the lcd off/on. Can be toggled after lcd is initialized without
+ * any apparent adverse effects to the lcd operation. Note that this
+ * gpio line is used by the lcd controller as the L_BIAS signal, but
+ * treo680 configures it as gpio.
+ */
+ gpio = GPIO_NR_TREO680_LCD_POWER;
+ if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0)
+ goto fail;
+
+ /*
+ * These two are called "enables", for lack of a better understanding.
+ * If either of these are toggled after the lcd is initialized, the
+ * image becomes degraded. N.B. The IPL shipped with the treo
+ * configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high. If
+ * the IPL is ever reprogrammed, this initialization may be need to be
+ * revisited.
+ */
+ gpio = GPIO_NR_TREO680_LCD_EN;
+ if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0)
+ goto fail;
+ gpio = GPIO_NR_TREO680_LCD_EN_N;
+ if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0)
+ goto fail;
+
+ /* driving this low turns LCD on */
+ gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0);
+
+ return;
+ fail:
+ pr_err("gpio %d initialization failed\n", gpio);
+ gpio_free(GPIO_NR_TREO680_LCD_POWER);
+ gpio_free(GPIO_NR_TREO680_LCD_EN);
+ gpio_free(GPIO_NR_TREO680_LCD_EN_N);
+}
+
static void __init treo680_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
palmphone_common_init();
+ treo680_gpio_init();
palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
GPIO_NR_TREO680_SD_POWER, 0);
}
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index 7992305..f38aa89 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -40,6 +40,8 @@
__raw_writel(csadrcfg[1], CSADRCFG1);
__raw_writel(csadrcfg[2], CSADRCFG2);
__raw_writel(csadrcfg[3], CSADRCFG3);
+ /* CSMSADRCFG wakes up in its default state (0), so we need to set it */
+ __raw_writel(0x2, CSMSADRCFG);
}
static struct syscore_ops smemc_syscore_ops = {
@@ -49,8 +51,19 @@
static int __init smemc_init(void)
{
- if (cpu_is_pxa3xx())
+ if (cpu_is_pxa3xx()) {
+ /*
+ * The only documentation we have on the
+ * Chip Select Configuration Register (CSMSADRCFG) is that
+ * it must be programmed to 0x2.
+ * Moreover, in the bit definitions, the second bit
+ * (CSMSADRCFG[1]) is called "SETALWAYS".
+ * Other bits are reserved in this register.
+ */
+ __raw_writel(0x2, CSMSADRCFG);
+
register_syscore_ops(&smemc_syscore_ops);
+ }
return 0;
}
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2073f0e..7e2cb88 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -732,7 +732,7 @@
#endif
/******************************************************************************
- * Framebuffer
+ * NAND Flash
******************************************************************************/
#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
static struct mtd_partition spitz_nand_partitions[] = {
@@ -858,7 +858,7 @@
#endif
/******************************************************************************
- * GPIO expander
+ * I2C devices
******************************************************************************/
#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
static struct pca953x_platform_data akita_pca953x_pdata = {
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 0c9e9a7..6bcf87f 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -197,7 +197,7 @@
static void s3c24xx_default_idle(void)
{
- unsigned long tmp;
+ unsigned long tmp = 0;
int i;
/* idle the system by using the idle mode which will wait for an
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 721e7b4..d4dcec53 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -71,13 +71,11 @@
* Init clocks here so that they are available for system timer
* initialization.
*/
- if (cpu_is_u8500_family())
+ if (cpu_is_u8500_family() || cpu_is_u9540())
db8500_prcmu_early_init();
- if (cpu_is_u8500_family())
+ if (cpu_is_u8500_family() || cpu_is_u9540())
u8500_clk_init();
- else if (cpu_is_u9540())
- u9540_clk_init();
else if (cpu_is_u8540())
u8540_clk_init();
}
diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c
index b54884bd..ce91493 100644
--- a/arch/arm/mach-ux500/cpuidle.c
+++ b/arch/arm/mach-ux500/cpuidle.c
@@ -40,8 +40,10 @@
goto wfi;
/* decouple the gic from the A9 cores */
- if (prcmu_gic_decouple())
+ if (prcmu_gic_decouple()) {
+ spin_unlock(&master_lock);
goto out;
+ }
/* If an error occur, we will have to recouple the gic
* manually */
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 4136b20..e06c34b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2019,7 +2019,7 @@
errata = p->errata;
if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels
- && (omap_dma_reserve_channels <= dma_lch_count))
+ && (omap_dma_reserve_channels < d->lch_count))
d->lch_count = omap_dma_reserve_channels;
dma_lch_count = d->lch_count;
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index e686fe7..7310bcf 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -49,7 +49,7 @@
"number (%u)\n", num);
continue;
}
- if (variant_mask & !(*mpp_list & variant_mask)) {
+ if (variant_mask && !(*mpp_list & variant_mask)) {
printk(KERN_WARNING
"orion_mpp_conf: requested MPP%u config "
"unavailable on this hardware\n", num);
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 76be7ee..b2016ed 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -3023,9 +3023,9 @@
*/
struct device_node *pctrl_np;
static const struct of_device_id exynos_pinctrl_ids[] = {
- { .compatible = "samsung,pinctrl-exynos4210", },
- { .compatible = "samsung,pinctrl-exynos4x12", },
- { .compatible = "samsung,pinctrl-exynos5440", },
+ { .compatible = "samsung,exynos4210-pinctrl", },
+ { .compatible = "samsung,exynos4x12-pinctrl", },
+ { .compatible = "samsung,exynos5440-pinctrl", },
};
for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
if (pctrl_np && of_device_is_available(pctrl_np))
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index 77048b1..558c292 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -313,7 +313,7 @@
}
-void __init vexpress_sysreg_setup(struct device_node *node)
+void vexpress_sysreg_setup(struct device_node *node)
{
if (WARN_ON(!vexpress_sysreg_base))
return;
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index fd7b24c..044d2da 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -947,9 +947,9 @@
}
static const struct of_device_id samsung_pinctrl_dt_match[] = {
- { .compatible = "samsung,pinctrl-exynos4210",
+ { .compatible = "samsung,exynos4210-pinctrl",
.data = (void *)exynos4210_pin_ctrl },
- { .compatible = "samsung,pinctrl-exynos4x12",
+ { .compatible = "samsung,exynos4x12-pinctrl",
.data = (void *)exynos4x12_pin_ctrl },
{},
};