mtd: spelling, capitalization, uniformity
Therefor -> Therefore
[Intern], [Internal] -> [INTERN]
[REPLACABLE] -> [REPLACEABLE]
syndrom, syndom -> syndrome
ecc -> ECC
buswith -> buswidth
endianess -> endianness
dont -> don't
occures -> occurs
independend -> independent
wihin -> within
erease -> erase
blockes -> blocks
...
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 271b8e7..b7cfe0d 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -110,7 +110,7 @@
/*
* addressbits is a lookup table to filter out the bits from the xor-ed
- * ecc data that identify the faulty location.
+ * ECC data that identify the faulty location.
* this is only used for repairing parity
* see the comments in nand_correct_data for more details
*/
@@ -153,7 +153,7 @@
* __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
* block
* @buf: input buffer with raw data
- * @eccsize: data bytes per ecc step (256 or 512)
+ * @eccsize: data bytes per ECC step (256 or 512)
* @code: output buffer with ECC
*/
void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
@@ -348,7 +348,7 @@
rp17 = (par ^ rp16) & 0xff;
/*
- * Finally calculate the ecc bits.
+ * Finally calculate the ECC bits.
* Again here it might seem that there are performance optimisations
* possible, but benchmarks showed that on the system this is developed
* the code below is the fastest
@@ -436,7 +436,7 @@
* @buf: raw data read from the chip
* @read_ecc: ECC from the chip
* @calc_ecc: the ECC calculated from raw data
- * @eccsize: data bytes per ecc step (256 or 512)
+ * @eccsize: data bytes per ECC step (256 or 512)
*
* Detect and correct a 1 bit error for eccsize byte block
*/
@@ -505,7 +505,7 @@
}
/* count nr of bits; use table lookup, faster than calculating it */
if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
- return 1; /* error in ecc data; no action needed */
+ return 1; /* error in ECC data; no action needed */
printk(KERN_ERR "uncorrectable error : ");
return -1;