| #ifndef __ASM_ARM_SYSTEM_H |
| #define __ASM_ARM_SYSTEM_H |
| |
| #ifdef __KERNEL__ |
| |
| |
| #define CPU_ARCH_UNKNOWN 0 |
| #define CPU_ARCH_ARMv3 1 |
| #define CPU_ARCH_ARMv4 2 |
| #define CPU_ARCH_ARMv4T 3 |
| #define CPU_ARCH_ARMv5 4 |
| #define CPU_ARCH_ARMv5T 5 |
| #define CPU_ARCH_ARMv5TE 6 |
| #define CPU_ARCH_ARMv5TEJ 7 |
| #define CPU_ARCH_ARMv6 8 |
| |
| /* |
| * CR1 bits (CP#15 CR1) |
| */ |
| #define CR_M (1 << 0) /* MMU enable */ |
| #define CR_A (1 << 1) /* Alignment abort enable */ |
| #define CR_C (1 << 2) /* Dcache enable */ |
| #define CR_W (1 << 3) /* Write buffer enable */ |
| #define CR_P (1 << 4) /* 32-bit exception handler */ |
| #define CR_D (1 << 5) /* 32-bit data address range */ |
| #define CR_L (1 << 6) /* Implementation defined */ |
| #define CR_B (1 << 7) /* Big endian */ |
| #define CR_S (1 << 8) /* System MMU protection */ |
| #define CR_R (1 << 9) /* ROM MMU protection */ |
| #define CR_F (1 << 10) /* Implementation defined */ |
| #define CR_Z (1 << 11) /* Implementation defined */ |
| #define CR_I (1 << 12) /* Icache enable */ |
| #define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */ |
| #define CR_RR (1 << 14) /* Round Robin cache replacement */ |
| #define CR_L4 (1 << 15) /* LDR pc can set T bit */ |
| #define CR_DT (1 << 16) |
| #define CR_IT (1 << 18) |
| #define CR_ST (1 << 19) |
| #define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */ |
| #define CR_U (1 << 22) /* Unaligned access operation */ |
| #define CR_XP (1 << 23) /* Extended page tables */ |
| #define CR_VE (1 << 24) /* Vectored interrupts */ |
| |
| #define CPUID_ID 0 |
| #define CPUID_CACHETYPE 1 |
| #define CPUID_TCM 2 |
| #define CPUID_TLBTYPE 3 |
| |
| #ifdef CONFIG_CPU_CP15 |
| #define read_cpuid(reg) \ |
| ({ \ |
| unsigned int __val; \ |
| asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \ |
| : "=r" (__val) \ |
| : \ |
| : "cc"); \ |
| __val; \ |
| }) |
| #else |
| #define read_cpuid(reg) (processor_id) |
| #endif |
| |
| /* |
| * This is used to ensure the compiler did actually allocate the register we |
| * asked it for some inline assembly sequences. Apparently we can't trust |
| * the compiler from one version to another so a bit of paranoia won't hurt. |
| * This string is meant to be concatenated with the inline asm string and |
| * will cause compilation to stop on mismatch. |
| * (for details, see gcc PR 15089) |
| */ |
| #define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <linux/linkage.h> |
| |
| struct thread_info; |
| struct task_struct; |
| |
| /* information about the system we're running on */ |
| extern unsigned int system_rev; |
| extern unsigned int system_serial_low; |
| extern unsigned int system_serial_high; |
| extern unsigned int mem_fclk_21285; |
| |
| struct pt_regs; |
| |
| void die(const char *msg, struct pt_regs *regs, int err) |
| __attribute__((noreturn)); |
| |
| struct siginfo; |
| void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, |
| unsigned long err, unsigned long trap); |
| |
| void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, |
| struct pt_regs *), |
| int sig, const char *name); |
| |
| #define xchg(ptr,x) \ |
| ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) |
| |
| #define tas(ptr) (xchg((ptr),1)) |
| |
| extern asmlinkage void __backtrace(void); |
| extern asmlinkage void c_backtrace(unsigned long fp, int pmode); |
| |
| struct mm_struct; |
| extern void show_pte(struct mm_struct *mm, unsigned long addr); |
| extern void __show_regs(struct pt_regs *); |
| |
| extern int cpu_architecture(void); |
| extern void cpu_init(void); |
| |
| void arm_machine_restart(char mode); |
| extern void (*arm_pm_restart)(char str); |
| |
| /* |
| * Intel's XScale3 core supports some v6 features (supersections, L2) |
| * but advertises itself as v5 as it does not support the v6 ISA. For |
| * this reason, we need a way to explicitly test for this type of CPU. |
| */ |
| #ifndef CONFIG_CPU_XSC3 |
| #define cpu_is_xsc3() 0 |
| #else |
| static inline int cpu_is_xsc3(void) |
| { |
| extern unsigned int processor_id; |
| |
| if ((processor_id & 0xffffe000) == 0x69056000) |
| return 1; |
| |
| return 0; |
| } |
| #endif |
| |
| #if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) |
| #define cpu_is_xscale() 0 |
| #else |
| #define cpu_is_xscale() 1 |
| #endif |
| |
| #define set_cr(x) \ |
| __asm__ __volatile__( \ |
| "mcr p15, 0, %0, c1, c0, 0 @ set CR" \ |
| : : "r" (x) : "cc") |
| |
| #define get_cr() \ |
| ({ \ |
| unsigned int __val; \ |
| __asm__ __volatile__( \ |
| "mrc p15, 0, %0, c1, c0, 0 @ get CR" \ |
| : "=r" (__val) : : "cc"); \ |
| __val; \ |
| }) |
| |
| extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ |
| extern unsigned long cr_alignment; /* defined in entry-armv.S */ |
| |
| #define UDBG_UNDEFINED (1 << 0) |
| #define UDBG_SYSCALL (1 << 1) |
| #define UDBG_BADABORT (1 << 2) |
| #define UDBG_SEGV (1 << 3) |
| #define UDBG_BUS (1 << 4) |
| |
| extern unsigned int user_debug; |
| |
| #if __LINUX_ARM_ARCH__ >= 4 |
| #define vectors_high() (cr_alignment & CR_V) |
| #else |
| #define vectors_high() (0) |
| #endif |
| |
| #if __LINUX_ARM_ARCH__ >= 6 |
| #define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ |
| : : "r" (0) : "memory") |
| #else |
| #define mb() __asm__ __volatile__ ("" : : : "memory") |
| #endif |
| #define rmb() mb() |
| #define wmb() mb() |
| #define read_barrier_depends() do { } while(0) |
| #define set_mb(var, value) do { var = value; mb(); } while (0) |
| #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); |
| |
| /* |
| * switch_mm() may do a full cache flush over the context switch, |
| * so enable interrupts over the context switch to avoid high |
| * latency. |
| */ |
| #define __ARCH_WANT_INTERRUPTS_ON_CTXSW |
| |
| /* |
| * switch_to(prev, next) should switch from task `prev' to `next' |
| * `prev' will never be the same as `next'. schedule() itself |
| * contains the memory barrier to tell GCC not to cache `current'. |
| */ |
| extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *); |
| |
| #define switch_to(prev,next,last) \ |
| do { \ |
| last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \ |
| } while (0) |
| |
| /* |
| * On SMP systems, when the scheduler does migration-cost autodetection, |
| * it needs a way to flush as much of the CPU's caches as possible. |
| * |
| * TODO: fill this in! |
| */ |
| static inline void sched_cacheflush(void) |
| { |
| } |
| |
| #include <linux/irqflags.h> |
| |
| #ifdef CONFIG_SMP |
| |
| #define smp_mb() mb() |
| #define smp_rmb() rmb() |
| #define smp_wmb() wmb() |
| #define smp_read_barrier_depends() read_barrier_depends() |
| |
| #else |
| |
| #define smp_mb() barrier() |
| #define smp_rmb() barrier() |
| #define smp_wmb() barrier() |
| #define smp_read_barrier_depends() do { } while(0) |
| |
| #endif /* CONFIG_SMP */ |
| |
| #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) |
| /* |
| * On the StrongARM, "swp" is terminally broken since it bypasses the |
| * cache totally. This means that the cache becomes inconsistent, and, |
| * since we use normal loads/stores as well, this is really bad. |
| * Typically, this causes oopsen in filp_close, but could have other, |
| * more disasterous effects. There are two work-arounds: |
| * 1. Disable interrupts and emulate the atomic swap |
| * 2. Clean the cache, perform atomic swap, flush the cache |
| * |
| * We choose (1) since its the "easiest" to achieve here and is not |
| * dependent on the processor type. |
| * |
| * NOTE that this solution won't work on an SMP system, so explcitly |
| * forbid it here. |
| */ |
| #define swp_is_buggy |
| #endif |
| |
| static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) |
| { |
| extern void __bad_xchg(volatile void *, int); |
| unsigned long ret; |
| #ifdef swp_is_buggy |
| unsigned long flags; |
| #endif |
| #if __LINUX_ARM_ARCH__ >= 6 |
| unsigned int tmp; |
| #endif |
| |
| switch (size) { |
| #if __LINUX_ARM_ARCH__ >= 6 |
| case 1: |
| asm volatile("@ __xchg1\n" |
| "1: ldrexb %0, [%3]\n" |
| " strexb %1, %2, [%3]\n" |
| " teq %1, #0\n" |
| " bne 1b" |
| : "=&r" (ret), "=&r" (tmp) |
| : "r" (x), "r" (ptr) |
| : "memory", "cc"); |
| break; |
| case 4: |
| asm volatile("@ __xchg4\n" |
| "1: ldrex %0, [%3]\n" |
| " strex %1, %2, [%3]\n" |
| " teq %1, #0\n" |
| " bne 1b" |
| : "=&r" (ret), "=&r" (tmp) |
| : "r" (x), "r" (ptr) |
| : "memory", "cc"); |
| break; |
| #elif defined(swp_is_buggy) |
| #ifdef CONFIG_SMP |
| #error SMP is not supported on this platform |
| #endif |
| case 1: |
| raw_local_irq_save(flags); |
| ret = *(volatile unsigned char *)ptr; |
| *(volatile unsigned char *)ptr = x; |
| raw_local_irq_restore(flags); |
| break; |
| |
| case 4: |
| raw_local_irq_save(flags); |
| ret = *(volatile unsigned long *)ptr; |
| *(volatile unsigned long *)ptr = x; |
| raw_local_irq_restore(flags); |
| break; |
| #else |
| case 1: |
| asm volatile("@ __xchg1\n" |
| " swpb %0, %1, [%2]" |
| : "=&r" (ret) |
| : "r" (x), "r" (ptr) |
| : "memory", "cc"); |
| break; |
| case 4: |
| asm volatile("@ __xchg4\n" |
| " swp %0, %1, [%2]" |
| : "=&r" (ret) |
| : "r" (x), "r" (ptr) |
| : "memory", "cc"); |
| break; |
| #endif |
| default: |
| __bad_xchg(ptr, size), ret = 0; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| extern void disable_hlt(void); |
| extern void enable_hlt(void); |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #define arch_align_stack(x) (x) |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif |