| #include <linux/idr.h> |
| #include <linux/mutex.h> |
| #include <linux/device.h> |
| #include <linux/sysfs.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/interrupt.h> |
| #include <linux/kdev_t.h> |
| |
| #include "gpiolib.h" |
| |
| static DEFINE_IDR(dirent_idr); |
| |
| |
| /* lock protects against unexport_gpio() being called while |
| * sysfs files are active. |
| */ |
| static DEFINE_MUTEX(sysfs_lock); |
| |
| /* |
| * /sys/class/gpio/gpioN... only for GPIOs that are exported |
| * /direction |
| * * MAY BE OMITTED if kernel won't allow direction changes |
| * * is read/write as "in" or "out" |
| * * may also be written as "high" or "low", initializing |
| * output value as specified ("out" implies "low") |
| * /value |
| * * always readable, subject to hardware behavior |
| * * may be writable, as zero/nonzero |
| * /edge |
| * * configures behavior of poll(2) on /value |
| * * available only if pin can generate IRQs on input |
| * * is read/write as "none", "falling", "rising", or "both" |
| * /active_low |
| * * configures polarity of /value |
| * * is read/write as zero/nonzero |
| * * also affects existing and subsequent "falling" and "rising" |
| * /edge configuration |
| */ |
| |
| static ssize_t gpio_direction_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const struct gpio_desc *desc = dev_get_drvdata(dev); |
| ssize_t status; |
| |
| mutex_lock(&sysfs_lock); |
| |
| if (!test_bit(FLAG_EXPORT, &desc->flags)) { |
| status = -EIO; |
| } else { |
| gpiod_get_direction(desc); |
| status = sprintf(buf, "%s\n", |
| test_bit(FLAG_IS_OUT, &desc->flags) |
| ? "out" : "in"); |
| } |
| |
| mutex_unlock(&sysfs_lock); |
| return status; |
| } |
| |
| static ssize_t gpio_direction_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct gpio_desc *desc = dev_get_drvdata(dev); |
| ssize_t status; |
| |
| mutex_lock(&sysfs_lock); |
| |
| if (!test_bit(FLAG_EXPORT, &desc->flags)) |
| status = -EIO; |
| else if (sysfs_streq(buf, "high")) |
| status = gpiod_direction_output_raw(desc, 1); |
| else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low")) |
| status = gpiod_direction_output_raw(desc, 0); |
| else if (sysfs_streq(buf, "in")) |
| status = gpiod_direction_input(desc); |
| else |
| status = -EINVAL; |
| |
| mutex_unlock(&sysfs_lock); |
| return status ? : size; |
| } |
| |
| static /* const */ DEVICE_ATTR(direction, 0644, |
| gpio_direction_show, gpio_direction_store); |
| |
| static ssize_t gpio_value_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct gpio_desc *desc = dev_get_drvdata(dev); |
| ssize_t status; |
| |
| mutex_lock(&sysfs_lock); |
| |
| if (!test_bit(FLAG_EXPORT, &desc->flags)) |
| status = -EIO; |
| else |
| status = sprintf(buf, "%d\n", gpiod_get_value_cansleep(desc)); |
| |
| mutex_unlock(&sysfs_lock); |
| return status; |
| } |
| |
| static ssize_t gpio_value_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct gpio_desc *desc = dev_get_drvdata(dev); |
| ssize_t status; |
| |
| mutex_lock(&sysfs_lock); |
| |
| if (!test_bit(FLAG_EXPORT, &desc->flags)) |
| status = -EIO; |
| else if (!test_bit(FLAG_IS_OUT, &desc->flags)) |
| status = -EPERM; |
| else { |
| long value; |
| |
| status = kstrtol(buf, 0, &value); |
| if (status == 0) { |
| gpiod_set_value_cansleep(desc, value); |
| status = size; |
| } |
| } |
| |
| mutex_unlock(&sysfs_lock); |
| return status; |
| } |
| |
| static const DEVICE_ATTR(value, 0644, |
| gpio_value_show, gpio_value_store); |
| |
| static irqreturn_t gpio_sysfs_irq(int irq, void *priv) |
| { |
| struct kernfs_node *value_sd = priv; |
| |
| sysfs_notify_dirent(value_sd); |
| return IRQ_HANDLED; |
| } |
| |
| static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev, |
| unsigned long gpio_flags) |
| { |
| struct kernfs_node *value_sd; |
| unsigned long irq_flags; |
| int ret, irq, id; |
| |
| if ((desc->flags & GPIO_TRIGGER_MASK) == gpio_flags) |
| return 0; |
| |
| irq = gpiod_to_irq(desc); |
| if (irq < 0) |
| return -EIO; |
| |
| id = desc->flags >> ID_SHIFT; |
| value_sd = idr_find(&dirent_idr, id); |
| if (value_sd) |
| free_irq(irq, value_sd); |
| |
| desc->flags &= ~GPIO_TRIGGER_MASK; |
| |
| if (!gpio_flags) { |
| gpio_unlock_as_irq(desc->chip, gpio_chip_hwgpio(desc)); |
| ret = 0; |
| goto free_id; |
| } |
| |
| irq_flags = IRQF_SHARED; |
| if (test_bit(FLAG_TRIG_FALL, &gpio_flags)) |
| irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? |
| IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING; |
| if (test_bit(FLAG_TRIG_RISE, &gpio_flags)) |
| irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? |
| IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; |
| |
| if (!value_sd) { |
| value_sd = sysfs_get_dirent(dev->kobj.sd, "value"); |
| if (!value_sd) { |
| ret = -ENODEV; |
| goto err_out; |
| } |
| |
| ret = idr_alloc(&dirent_idr, value_sd, 1, 0, GFP_KERNEL); |
| if (ret < 0) |
| goto free_sd; |
| id = ret; |
| |
| desc->flags &= GPIO_FLAGS_MASK; |
| desc->flags |= (unsigned long)id << ID_SHIFT; |
| |
| if (desc->flags >> ID_SHIFT != id) { |
| ret = -ERANGE; |
| goto free_id; |
| } |
| } |
| |
| ret = request_any_context_irq(irq, gpio_sysfs_irq, irq_flags, |
| "gpiolib", value_sd); |
| if (ret < 0) |
| goto free_id; |
| |
| ret = gpio_lock_as_irq(desc->chip, gpio_chip_hwgpio(desc)); |
| if (ret < 0) { |
| gpiod_warn(desc, "failed to flag the GPIO for IRQ\n"); |
| goto free_id; |
| } |
| |
| desc->flags |= gpio_flags; |
| return 0; |
| |
| free_id: |
| idr_remove(&dirent_idr, id); |
| desc->flags &= GPIO_FLAGS_MASK; |
| free_sd: |
| if (value_sd) |
| sysfs_put(value_sd); |
| err_out: |
| return ret; |
| } |
| |
| static const struct { |
| const char *name; |
| unsigned long flags; |
| } trigger_types[] = { |
| { "none", 0 }, |
| { "falling", BIT(FLAG_TRIG_FALL) }, |
| { "rising", BIT(FLAG_TRIG_RISE) }, |
| { "both", BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE) }, |
| }; |
| |
| static ssize_t gpio_edge_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const struct gpio_desc *desc = dev_get_drvdata(dev); |
| ssize_t status; |
| |
| mutex_lock(&sysfs_lock); |
| |
| if (!test_bit(FLAG_EXPORT, &desc->flags)) |
| status = -EIO; |
| else { |
| int i; |
| |
| status = 0; |
| for (i = 0; i < ARRAY_SIZE(trigger_types); i++) |
| if ((desc->flags & GPIO_TRIGGER_MASK) |
| == trigger_types[i].flags) { |
| status = sprintf(buf, "%s\n", |
| trigger_types[i].name); |
| break; |
| } |
| } |
| |
| mutex_unlock(&sysfs_lock); |
| return status; |
| } |
| |
| static ssize_t gpio_edge_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct gpio_desc *desc = dev_get_drvdata(dev); |
| ssize_t status; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(trigger_types); i++) |
| if (sysfs_streq(trigger_types[i].name, buf)) |
| goto found; |
| return -EINVAL; |
| |
| found: |
| mutex_lock(&sysfs_lock); |
| |
| if (!test_bit(FLAG_EXPORT, &desc->flags)) |
| status = -EIO; |
| else { |
| status = gpio_setup_irq(desc, dev, trigger_types[i].flags); |
| if (!status) |
| status = size; |
| } |
| |
| mutex_unlock(&sysfs_lock); |
| |
| return status; |
| } |
| |
| static DEVICE_ATTR(edge, 0644, gpio_edge_show, gpio_edge_store); |
| |
| static int sysfs_set_active_low(struct gpio_desc *desc, struct device *dev, |
| int value) |
| { |
| int status = 0; |
| |
| if (!!test_bit(FLAG_ACTIVE_LOW, &desc->flags) == !!value) |
| return 0; |
| |
| if (value) |
| set_bit(FLAG_ACTIVE_LOW, &desc->flags); |
| else |
| clear_bit(FLAG_ACTIVE_LOW, &desc->flags); |
| |
| /* reconfigure poll(2) support if enabled on one edge only */ |
| if (dev != NULL && (!!test_bit(FLAG_TRIG_RISE, &desc->flags) ^ |
| !!test_bit(FLAG_TRIG_FALL, &desc->flags))) { |
| unsigned long trigger_flags = desc->flags & GPIO_TRIGGER_MASK; |
| |
| gpio_setup_irq(desc, dev, 0); |
| status = gpio_setup_irq(desc, dev, trigger_flags); |
| } |
| |
| return status; |
| } |
| |
| static ssize_t gpio_active_low_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const struct gpio_desc *desc = dev_get_drvdata(dev); |
| ssize_t status; |
| |
| mutex_lock(&sysfs_lock); |
| |
| if (!test_bit(FLAG_EXPORT, &desc->flags)) |
| status = -EIO; |
| else |
| status = sprintf(buf, "%d\n", |
| !!test_bit(FLAG_ACTIVE_LOW, &desc->flags)); |
| |
| mutex_unlock(&sysfs_lock); |
| |
| return status; |
| } |
| |
| static ssize_t gpio_active_low_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct gpio_desc *desc = dev_get_drvdata(dev); |
| ssize_t status; |
| |
| mutex_lock(&sysfs_lock); |
| |
| if (!test_bit(FLAG_EXPORT, &desc->flags)) { |
| status = -EIO; |
| } else { |
| long value; |
| |
| status = kstrtol(buf, 0, &value); |
| if (status == 0) |
| status = sysfs_set_active_low(desc, dev, value != 0); |
| } |
| |
| mutex_unlock(&sysfs_lock); |
| |
| return status ? : size; |
| } |
| |
| static const DEVICE_ATTR(active_low, 0644, |
| gpio_active_low_show, gpio_active_low_store); |
| |
| static const struct attribute *gpio_attrs[] = { |
| &dev_attr_value.attr, |
| &dev_attr_active_low.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group gpio_attr_group = { |
| .attrs = (struct attribute **) gpio_attrs, |
| }; |
| |
| /* |
| * /sys/class/gpio/gpiochipN/ |
| * /base ... matching gpio_chip.base (N) |
| * /label ... matching gpio_chip.label |
| * /ngpio ... matching gpio_chip.ngpio |
| */ |
| |
| static ssize_t chip_base_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const struct gpio_chip *chip = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", chip->base); |
| } |
| static DEVICE_ATTR(base, 0444, chip_base_show, NULL); |
| |
| static ssize_t chip_label_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const struct gpio_chip *chip = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", chip->label ? : ""); |
| } |
| static DEVICE_ATTR(label, 0444, chip_label_show, NULL); |
| |
| static ssize_t chip_ngpio_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const struct gpio_chip *chip = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%u\n", chip->ngpio); |
| } |
| static DEVICE_ATTR(ngpio, 0444, chip_ngpio_show, NULL); |
| |
| static const struct attribute *gpiochip_attrs[] = { |
| &dev_attr_base.attr, |
| &dev_attr_label.attr, |
| &dev_attr_ngpio.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group gpiochip_attr_group = { |
| .attrs = (struct attribute **) gpiochip_attrs, |
| }; |
| |
| /* |
| * /sys/class/gpio/export ... write-only |
| * integer N ... number of GPIO to export (full access) |
| * /sys/class/gpio/unexport ... write-only |
| * integer N ... number of GPIO to unexport |
| */ |
| static ssize_t export_store(struct class *class, |
| struct class_attribute *attr, |
| const char *buf, size_t len) |
| { |
| long gpio; |
| struct gpio_desc *desc; |
| int status; |
| |
| status = kstrtol(buf, 0, &gpio); |
| if (status < 0) |
| goto done; |
| |
| desc = gpio_to_desc(gpio); |
| /* reject invalid GPIOs */ |
| if (!desc) { |
| pr_warn("%s: invalid GPIO %ld\n", __func__, gpio); |
| return -EINVAL; |
| } |
| |
| /* No extra locking here; FLAG_SYSFS just signifies that the |
| * request and export were done by on behalf of userspace, so |
| * they may be undone on its behalf too. |
| */ |
| |
| status = gpiod_request(desc, "sysfs"); |
| if (status < 0) { |
| if (status == -EPROBE_DEFER) |
| status = -ENODEV; |
| goto done; |
| } |
| status = gpiod_export(desc, true); |
| if (status < 0) |
| gpiod_free(desc); |
| else |
| set_bit(FLAG_SYSFS, &desc->flags); |
| |
| done: |
| if (status) |
| pr_debug("%s: status %d\n", __func__, status); |
| return status ? : len; |
| } |
| |
| static ssize_t unexport_store(struct class *class, |
| struct class_attribute *attr, |
| const char *buf, size_t len) |
| { |
| long gpio; |
| struct gpio_desc *desc; |
| int status; |
| |
| status = kstrtol(buf, 0, &gpio); |
| if (status < 0) |
| goto done; |
| |
| desc = gpio_to_desc(gpio); |
| /* reject bogus commands (gpio_unexport ignores them) */ |
| if (!desc) { |
| pr_warn("%s: invalid GPIO %ld\n", __func__, gpio); |
| return -EINVAL; |
| } |
| |
| status = -EINVAL; |
| |
| /* No extra locking here; FLAG_SYSFS just signifies that the |
| * request and export were done by on behalf of userspace, so |
| * they may be undone on its behalf too. |
| */ |
| if (test_and_clear_bit(FLAG_SYSFS, &desc->flags)) { |
| status = 0; |
| gpiod_free(desc); |
| } |
| done: |
| if (status) |
| pr_debug("%s: status %d\n", __func__, status); |
| return status ? : len; |
| } |
| |
| static struct class_attribute gpio_class_attrs[] = { |
| __ATTR(export, 0200, NULL, export_store), |
| __ATTR(unexport, 0200, NULL, unexport_store), |
| __ATTR_NULL, |
| }; |
| |
| static struct class gpio_class = { |
| .name = "gpio", |
| .owner = THIS_MODULE, |
| |
| .class_attrs = gpio_class_attrs, |
| }; |
| |
| |
| /** |
| * gpiod_export - export a GPIO through sysfs |
| * @gpio: gpio to make available, already requested |
| * @direction_may_change: true if userspace may change gpio direction |
| * Context: arch_initcall or later |
| * |
| * When drivers want to make a GPIO accessible to userspace after they |
| * have requested it -- perhaps while debugging, or as part of their |
| * public interface -- they may use this routine. If the GPIO can |
| * change direction (some can't) and the caller allows it, userspace |
| * will see "direction" sysfs attribute which may be used to change |
| * the gpio's direction. A "value" attribute will always be provided. |
| * |
| * Returns zero on success, else an error. |
| */ |
| int gpiod_export(struct gpio_desc *desc, bool direction_may_change) |
| { |
| unsigned long flags; |
| int status; |
| const char *ioname = NULL; |
| struct device *dev; |
| int offset; |
| |
| /* can't export until sysfs is available ... */ |
| if (!gpio_class.p) { |
| pr_debug("%s: called too early!\n", __func__); |
| return -ENOENT; |
| } |
| |
| if (!desc) { |
| pr_debug("%s: invalid gpio descriptor\n", __func__); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&sysfs_lock); |
| |
| spin_lock_irqsave(&gpio_lock, flags); |
| if (!test_bit(FLAG_REQUESTED, &desc->flags) || |
| test_bit(FLAG_EXPORT, &desc->flags)) { |
| spin_unlock_irqrestore(&gpio_lock, flags); |
| gpiod_dbg(desc, "%s: unavailable (requested=%d, exported=%d)\n", |
| __func__, |
| test_bit(FLAG_REQUESTED, &desc->flags), |
| test_bit(FLAG_EXPORT, &desc->flags)); |
| status = -EPERM; |
| goto fail_unlock; |
| } |
| |
| if (!desc->chip->direction_input || !desc->chip->direction_output) |
| direction_may_change = false; |
| spin_unlock_irqrestore(&gpio_lock, flags); |
| |
| offset = gpio_chip_hwgpio(desc); |
| if (desc->chip->names && desc->chip->names[offset]) |
| ioname = desc->chip->names[offset]; |
| |
| dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0), |
| desc, ioname ? ioname : "gpio%u", |
| desc_to_gpio(desc)); |
| if (IS_ERR(dev)) { |
| status = PTR_ERR(dev); |
| goto fail_unlock; |
| } |
| |
| status = sysfs_create_group(&dev->kobj, &gpio_attr_group); |
| if (status) |
| goto fail_unregister_device; |
| |
| if (direction_may_change) { |
| status = device_create_file(dev, &dev_attr_direction); |
| if (status) |
| goto fail_unregister_device; |
| } |
| |
| if (gpiod_to_irq(desc) >= 0 && (direction_may_change || |
| !test_bit(FLAG_IS_OUT, &desc->flags))) { |
| status = device_create_file(dev, &dev_attr_edge); |
| if (status) |
| goto fail_unregister_device; |
| } |
| |
| set_bit(FLAG_EXPORT, &desc->flags); |
| mutex_unlock(&sysfs_lock); |
| return 0; |
| |
| fail_unregister_device: |
| device_unregister(dev); |
| fail_unlock: |
| mutex_unlock(&sysfs_lock); |
| gpiod_dbg(desc, "%s: status %d\n", __func__, status); |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(gpiod_export); |
| |
| static int match_export(struct device *dev, const void *data) |
| { |
| return dev_get_drvdata(dev) == data; |
| } |
| |
| /** |
| * gpiod_export_link - create a sysfs link to an exported GPIO node |
| * @dev: device under which to create symlink |
| * @name: name of the symlink |
| * @gpio: gpio to create symlink to, already exported |
| * |
| * Set up a symlink from /sys/.../dev/name to /sys/class/gpio/gpioN |
| * node. Caller is responsible for unlinking. |
| * |
| * Returns zero on success, else an error. |
| */ |
| int gpiod_export_link(struct device *dev, const char *name, |
| struct gpio_desc *desc) |
| { |
| int status = -EINVAL; |
| |
| if (!desc) { |
| pr_warn("%s: invalid GPIO\n", __func__); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&sysfs_lock); |
| |
| if (test_bit(FLAG_EXPORT, &desc->flags)) { |
| struct device *tdev; |
| |
| tdev = class_find_device(&gpio_class, NULL, desc, match_export); |
| if (tdev != NULL) { |
| status = sysfs_create_link(&dev->kobj, &tdev->kobj, |
| name); |
| } else { |
| status = -ENODEV; |
| } |
| } |
| |
| mutex_unlock(&sysfs_lock); |
| |
| if (status) |
| gpiod_dbg(desc, "%s: status %d\n", __func__, status); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(gpiod_export_link); |
| |
| /** |
| * gpiod_sysfs_set_active_low - set the polarity of gpio sysfs value |
| * @gpio: gpio to change |
| * @value: non-zero to use active low, i.e. inverted values |
| * |
| * Set the polarity of /sys/class/gpio/gpioN/value sysfs attribute. |
| * The GPIO does not have to be exported yet. If poll(2) support has |
| * been enabled for either rising or falling edge, it will be |
| * reconfigured to follow the new polarity. |
| * |
| * Returns zero on success, else an error. |
| */ |
| int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value) |
| { |
| struct device *dev = NULL; |
| int status = -EINVAL; |
| |
| if (!desc) { |
| pr_warn("%s: invalid GPIO\n", __func__); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&sysfs_lock); |
| |
| if (test_bit(FLAG_EXPORT, &desc->flags)) { |
| dev = class_find_device(&gpio_class, NULL, desc, match_export); |
| if (dev == NULL) { |
| status = -ENODEV; |
| goto unlock; |
| } |
| } |
| |
| status = sysfs_set_active_low(desc, dev, value); |
| |
| unlock: |
| mutex_unlock(&sysfs_lock); |
| |
| if (status) |
| gpiod_dbg(desc, "%s: status %d\n", __func__, status); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(gpiod_sysfs_set_active_low); |
| |
| /** |
| * gpiod_unexport - reverse effect of gpio_export() |
| * @gpio: gpio to make unavailable |
| * |
| * This is implicit on gpio_free(). |
| */ |
| void gpiod_unexport(struct gpio_desc *desc) |
| { |
| int status = 0; |
| struct device *dev = NULL; |
| |
| if (!desc) { |
| pr_warn("%s: invalid GPIO\n", __func__); |
| return; |
| } |
| |
| mutex_lock(&sysfs_lock); |
| |
| if (test_bit(FLAG_EXPORT, &desc->flags)) { |
| |
| dev = class_find_device(&gpio_class, NULL, desc, match_export); |
| if (dev) { |
| gpio_setup_irq(desc, dev, 0); |
| clear_bit(FLAG_EXPORT, &desc->flags); |
| } else |
| status = -ENODEV; |
| } |
| |
| mutex_unlock(&sysfs_lock); |
| |
| if (dev) { |
| device_unregister(dev); |
| put_device(dev); |
| } |
| |
| if (status) |
| gpiod_dbg(desc, "%s: status %d\n", __func__, status); |
| } |
| EXPORT_SYMBOL_GPL(gpiod_unexport); |
| |
| int gpiochip_export(struct gpio_chip *chip) |
| { |
| int status; |
| struct device *dev; |
| |
| /* Many systems register gpio chips for SOC support very early, |
| * before driver model support is available. In those cases we |
| * export this later, in gpiolib_sysfs_init() ... here we just |
| * verify that _some_ field of gpio_class got initialized. |
| */ |
| if (!gpio_class.p) |
| return 0; |
| |
| /* use chip->base for the ID; it's already known to be unique */ |
| mutex_lock(&sysfs_lock); |
| dev = device_create(&gpio_class, chip->dev, MKDEV(0, 0), chip, |
| "gpiochip%d", chip->base); |
| if (!IS_ERR(dev)) { |
| status = sysfs_create_group(&dev->kobj, |
| &gpiochip_attr_group); |
| } else |
| status = PTR_ERR(dev); |
| chip->exported = (status == 0); |
| mutex_unlock(&sysfs_lock); |
| |
| if (status) |
| chip_dbg(chip, "%s: status %d\n", __func__, status); |
| |
| return status; |
| } |
| |
| void gpiochip_unexport(struct gpio_chip *chip) |
| { |
| int status; |
| struct device *dev; |
| |
| mutex_lock(&sysfs_lock); |
| dev = class_find_device(&gpio_class, NULL, chip, match_export); |
| if (dev) { |
| put_device(dev); |
| device_unregister(dev); |
| chip->exported = false; |
| status = 0; |
| } else |
| status = -ENODEV; |
| mutex_unlock(&sysfs_lock); |
| |
| if (status) |
| chip_dbg(chip, "%s: status %d\n", __func__, status); |
| } |
| |
| static int __init gpiolib_sysfs_init(void) |
| { |
| int status; |
| unsigned long flags; |
| struct gpio_chip *chip; |
| |
| status = class_register(&gpio_class); |
| if (status < 0) |
| return status; |
| |
| /* Scan and register the gpio_chips which registered very |
| * early (e.g. before the class_register above was called). |
| * |
| * We run before arch_initcall() so chip->dev nodes can have |
| * registered, and so arch_initcall() can always gpio_export(). |
| */ |
| spin_lock_irqsave(&gpio_lock, flags); |
| list_for_each_entry(chip, &gpio_chips, list) { |
| if (chip->exported) |
| continue; |
| |
| /* |
| * TODO we yield gpio_lock here because gpiochip_export() |
| * acquires a mutex. This is unsafe and needs to be fixed. |
| * |
| * Also it would be nice to use gpiochip_find() here so we |
| * can keep gpio_chips local to gpiolib.c, but the yield of |
| * gpio_lock prevents us from doing this. |
| */ |
| spin_unlock_irqrestore(&gpio_lock, flags); |
| status = gpiochip_export(chip); |
| spin_lock_irqsave(&gpio_lock, flags); |
| } |
| spin_unlock_irqrestore(&gpio_lock, flags); |
| |
| |
| return status; |
| } |
| postcore_initcall(gpiolib_sysfs_init); |