| /* |
| * SAMSUNG EXYNOS USB HOST OHCI Controller |
| * |
| * Copyright (C) 2011 Samsung Electronics Co.Ltd |
| * Author: Jingoo Han <jg1.han@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/usb-ohci-exynos.h> |
| #include <linux/usb/phy.h> |
| #include <linux/usb/samsung_usb_phy.h> |
| |
| struct exynos_ohci_hcd { |
| struct device *dev; |
| struct usb_hcd *hcd; |
| struct clk *clk; |
| struct usb_phy *phy; |
| struct usb_otg *otg; |
| struct exynos4_ohci_platdata *pdata; |
| }; |
| |
| static void exynos_ohci_phy_enable(struct exynos_ohci_hcd *exynos_ohci) |
| { |
| struct platform_device *pdev = to_platform_device(exynos_ohci->dev); |
| |
| if (exynos_ohci->phy) |
| usb_phy_init(exynos_ohci->phy); |
| else if (exynos_ohci->pdata && exynos_ohci->pdata->phy_init) |
| exynos_ohci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); |
| } |
| |
| static void exynos_ohci_phy_disable(struct exynos_ohci_hcd *exynos_ohci) |
| { |
| struct platform_device *pdev = to_platform_device(exynos_ohci->dev); |
| |
| if (exynos_ohci->phy) |
| usb_phy_shutdown(exynos_ohci->phy); |
| else if (exynos_ohci->pdata && exynos_ohci->pdata->phy_exit) |
| exynos_ohci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); |
| } |
| |
| static int ohci_exynos_reset(struct usb_hcd *hcd) |
| { |
| return ohci_init(hcd_to_ohci(hcd)); |
| } |
| |
| static int ohci_exynos_start(struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| int ret; |
| |
| ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci); |
| |
| ret = ohci_run(ohci); |
| if (ret < 0) { |
| dev_err(hcd->self.controller, "can't start %s\n", |
| hcd->self.bus_name); |
| ohci_stop(hcd); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct hc_driver exynos_ohci_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "EXYNOS OHCI Host Controller", |
| .hcd_priv_size = sizeof(struct ohci_hcd), |
| |
| .irq = ohci_irq, |
| .flags = HCD_MEMORY|HCD_USB11, |
| |
| .reset = ohci_exynos_reset, |
| .start = ohci_exynos_start, |
| .stop = ohci_stop, |
| .shutdown = ohci_shutdown, |
| |
| .get_frame_number = ohci_get_frame, |
| |
| .urb_enqueue = ohci_urb_enqueue, |
| .urb_dequeue = ohci_urb_dequeue, |
| .endpoint_disable = ohci_endpoint_disable, |
| |
| .hub_status_data = ohci_hub_status_data, |
| .hub_control = ohci_hub_control, |
| #ifdef CONFIG_PM |
| .bus_suspend = ohci_bus_suspend, |
| .bus_resume = ohci_bus_resume, |
| #endif |
| .start_port_reset = ohci_start_port_reset, |
| }; |
| |
| static int exynos_ohci_probe(struct platform_device *pdev) |
| { |
| struct exynos4_ohci_platdata *pdata = dev_get_platdata(&pdev->dev); |
| struct exynos_ohci_hcd *exynos_ohci; |
| struct usb_hcd *hcd; |
| struct ohci_hcd *ohci; |
| struct resource *res; |
| struct usb_phy *phy; |
| int irq; |
| int err; |
| |
| /* |
| * Right now device-tree probed devices don't get dma_mask set. |
| * Since shared usb code relies on it, set it here for now. |
| * Once we move to full device tree support this will vanish off. |
| */ |
| if (!pdev->dev.dma_mask) |
| pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; |
| if (!pdev->dev.coherent_dma_mask) |
| pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); |
| |
| exynos_ohci = devm_kzalloc(&pdev->dev, sizeof(struct exynos_ohci_hcd), |
| GFP_KERNEL); |
| if (!exynos_ohci) |
| return -ENOMEM; |
| |
| if (of_device_is_compatible(pdev->dev.of_node, |
| "samsung,exynos5440-ohci")) |
| goto skip_phy; |
| |
| phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); |
| if (IS_ERR(phy)) { |
| /* Fallback to pdata */ |
| if (!pdata) { |
| dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); |
| return -EPROBE_DEFER; |
| } else { |
| exynos_ohci->pdata = pdata; |
| } |
| } else { |
| exynos_ohci->phy = phy; |
| exynos_ohci->otg = phy->otg; |
| } |
| |
| skip_phy: |
| |
| exynos_ohci->dev = &pdev->dev; |
| |
| hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev, |
| dev_name(&pdev->dev)); |
| if (!hcd) { |
| dev_err(&pdev->dev, "Unable to create HCD\n"); |
| return -ENOMEM; |
| } |
| |
| exynos_ohci->hcd = hcd; |
| exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost"); |
| |
| if (IS_ERR(exynos_ohci->clk)) { |
| dev_err(&pdev->dev, "Failed to get usbhost clock\n"); |
| err = PTR_ERR(exynos_ohci->clk); |
| goto fail_clk; |
| } |
| |
| err = clk_prepare_enable(exynos_ohci->clk); |
| if (err) |
| goto fail_clk; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "Failed to get I/O memory\n"); |
| err = -ENXIO; |
| goto fail_io; |
| } |
| |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len); |
| if (!hcd->regs) { |
| dev_err(&pdev->dev, "Failed to remap I/O memory\n"); |
| err = -ENOMEM; |
| goto fail_io; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (!irq) { |
| dev_err(&pdev->dev, "Failed to get IRQ\n"); |
| err = -ENODEV; |
| goto fail_io; |
| } |
| |
| if (exynos_ohci->otg) |
| exynos_ohci->otg->set_host(exynos_ohci->otg, |
| &exynos_ohci->hcd->self); |
| |
| exynos_ohci_phy_enable(exynos_ohci); |
| |
| ohci = hcd_to_ohci(hcd); |
| ohci_hcd_init(ohci); |
| |
| err = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to add USB HCD\n"); |
| goto fail_add_hcd; |
| } |
| |
| platform_set_drvdata(pdev, exynos_ohci); |
| |
| return 0; |
| |
| fail_add_hcd: |
| exynos_ohci_phy_disable(exynos_ohci); |
| fail_io: |
| clk_disable_unprepare(exynos_ohci->clk); |
| fail_clk: |
| usb_put_hcd(hcd); |
| return err; |
| } |
| |
| static int exynos_ohci_remove(struct platform_device *pdev) |
| { |
| struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev); |
| struct usb_hcd *hcd = exynos_ohci->hcd; |
| |
| usb_remove_hcd(hcd); |
| |
| if (exynos_ohci->otg) |
| exynos_ohci->otg->set_host(exynos_ohci->otg, |
| &exynos_ohci->hcd->self); |
| |
| exynos_ohci_phy_disable(exynos_ohci); |
| |
| clk_disable_unprepare(exynos_ohci->clk); |
| |
| usb_put_hcd(hcd); |
| |
| return 0; |
| } |
| |
| static void exynos_ohci_shutdown(struct platform_device *pdev) |
| { |
| struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev); |
| struct usb_hcd *hcd = exynos_ohci->hcd; |
| |
| if (hcd->driver->shutdown) |
| hcd->driver->shutdown(hcd); |
| } |
| |
| #ifdef CONFIG_PM |
| static int exynos_ohci_suspend(struct device *dev) |
| { |
| struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev); |
| struct usb_hcd *hcd = exynos_ohci->hcd; |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| unsigned long flags; |
| int rc = 0; |
| |
| /* |
| * Root hub was already suspended. Disable irq emission and |
| * mark HW unaccessible, bail out if RH has been resumed. Use |
| * the spinlock to properly synchronize with possible pending |
| * RH suspend or resume activity. |
| */ |
| spin_lock_irqsave(&ohci->lock, flags); |
| if (ohci->rh_state != OHCI_RH_SUSPENDED && |
| ohci->rh_state != OHCI_RH_HALTED) { |
| rc = -EINVAL; |
| goto fail; |
| } |
| |
| clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
| |
| if (exynos_ohci->otg) |
| exynos_ohci->otg->set_host(exynos_ohci->otg, |
| &exynos_ohci->hcd->self); |
| |
| exynos_ohci_phy_disable(exynos_ohci); |
| |
| clk_disable_unprepare(exynos_ohci->clk); |
| |
| fail: |
| spin_unlock_irqrestore(&ohci->lock, flags); |
| |
| return rc; |
| } |
| |
| static int exynos_ohci_resume(struct device *dev) |
| { |
| struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev); |
| struct usb_hcd *hcd = exynos_ohci->hcd; |
| |
| clk_prepare_enable(exynos_ohci->clk); |
| |
| if (exynos_ohci->otg) |
| exynos_ohci->otg->set_host(exynos_ohci->otg, |
| &exynos_ohci->hcd->self); |
| |
| exynos_ohci_phy_enable(exynos_ohci); |
| |
| ohci_resume(hcd, false); |
| |
| return 0; |
| } |
| #else |
| #define exynos_ohci_suspend NULL |
| #define exynos_ohci_resume NULL |
| #endif |
| |
| static const struct dev_pm_ops exynos_ohci_pm_ops = { |
| .suspend = exynos_ohci_suspend, |
| .resume = exynos_ohci_resume, |
| }; |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id exynos_ohci_match[] = { |
| { .compatible = "samsung,exynos4210-ohci" }, |
| { .compatible = "samsung,exynos5440-ohci" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_ohci_match); |
| #endif |
| |
| static struct platform_driver exynos_ohci_driver = { |
| .probe = exynos_ohci_probe, |
| .remove = exynos_ohci_remove, |
| .shutdown = exynos_ohci_shutdown, |
| .driver = { |
| .name = "exynos-ohci", |
| .owner = THIS_MODULE, |
| .pm = &exynos_ohci_pm_ops, |
| .of_match_table = of_match_ptr(exynos_ohci_match), |
| } |
| }; |
| |
| MODULE_ALIAS("platform:exynos-ohci"); |
| MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); |