| /* atlx.c -- common functions for Attansic network drivers |
| * |
| * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. |
| * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com> |
| * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com> |
| * Copyright(c) 2007 Atheros Corporation. All rights reserved. |
| * |
| * Derived from Intel e1000 driver |
| * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 59 |
| * Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* Including this file like a header is a temporary hack, I promise. -- CHS */ |
| #ifndef ATLX_C |
| #define ATLX_C |
| |
| #include <linux/device.h> |
| #include <linux/errno.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if.h> |
| #include <linux/netdevice.h> |
| #include <linux/socket.h> |
| #include <linux/sockios.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/workqueue.h> |
| |
| #include "atlx.h" |
| |
| static s32 atlx_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data); |
| static u32 atlx_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr); |
| static void atlx_set_mac_addr(struct atl1_hw *hw); |
| |
| static struct atlx_spi_flash_dev flash_table[] = { |
| /* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SEC_ERS CHIP_ERS */ |
| {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62}, |
| {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60}, |
| {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7}, |
| }; |
| |
| static int atlx_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| case SIOCGMIIREG: |
| case SIOCSMIIREG: |
| return atlx_mii_ioctl(netdev, ifr, cmd); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| /* |
| * atlx_set_mac - Change the Ethernet Address of the NIC |
| * @netdev: network interface device structure |
| * @p: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int atlx_set_mac(struct net_device *netdev, void *p) |
| { |
| struct atlx_adapter *adapter = netdev_priv(netdev); |
| struct sockaddr *addr = p; |
| |
| if (netif_running(netdev)) |
| return -EBUSY; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); |
| netdev->addr_assign_type &= ~NET_ADDR_RANDOM; |
| |
| atlx_set_mac_addr(&adapter->hw); |
| return 0; |
| } |
| |
| static void atlx_check_for_link(struct atlx_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| u16 phy_data = 0; |
| |
| spin_lock(&adapter->lock); |
| adapter->phy_timer_pending = false; |
| atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); |
| atlx_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); |
| spin_unlock(&adapter->lock); |
| |
| /* notify upper layer link down ASAP */ |
| if (!(phy_data & BMSR_LSTATUS)) { |
| /* Link Down */ |
| if (netif_carrier_ok(netdev)) { |
| /* old link state: Up */ |
| dev_info(&adapter->pdev->dev, "%s link is down\n", |
| netdev->name); |
| adapter->link_speed = SPEED_0; |
| netif_carrier_off(netdev); |
| } |
| } |
| schedule_work(&adapter->link_chg_task); |
| } |
| |
| /* |
| * atlx_set_multi - Multicast and Promiscuous mode set |
| * @netdev: network interface device structure |
| * |
| * The set_multi entry point is called whenever the multicast address |
| * list or the network interface flags are updated. This routine is |
| * responsible for configuring the hardware for proper multicast, |
| * promiscuous mode, and all-multi behavior. |
| */ |
| static void atlx_set_multi(struct net_device *netdev) |
| { |
| struct atlx_adapter *adapter = netdev_priv(netdev); |
| struct atlx_hw *hw = &adapter->hw; |
| struct netdev_hw_addr *ha; |
| u32 rctl; |
| u32 hash_value; |
| |
| /* Check for Promiscuous and All Multicast modes */ |
| rctl = ioread32(hw->hw_addr + REG_MAC_CTRL); |
| if (netdev->flags & IFF_PROMISC) |
| rctl |= MAC_CTRL_PROMIS_EN; |
| else if (netdev->flags & IFF_ALLMULTI) { |
| rctl |= MAC_CTRL_MC_ALL_EN; |
| rctl &= ~MAC_CTRL_PROMIS_EN; |
| } else |
| rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); |
| |
| iowrite32(rctl, hw->hw_addr + REG_MAC_CTRL); |
| |
| /* clear the old settings from the multicast hash table */ |
| iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); |
| iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); |
| |
| /* compute mc addresses' hash value ,and put it into hash table */ |
| netdev_for_each_mc_addr(ha, netdev) { |
| hash_value = atlx_hash_mc_addr(hw, ha->addr); |
| atlx_hash_set(hw, hash_value); |
| } |
| } |
| |
| /* |
| * atlx_irq_enable - Enable default interrupt generation settings |
| * @adapter: board private structure |
| */ |
| static void atlx_irq_enable(struct atlx_adapter *adapter) |
| { |
| iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR); |
| ioread32(adapter->hw.hw_addr + REG_IMR); |
| } |
| |
| /* |
| * atlx_irq_disable - Mask off interrupt generation on the NIC |
| * @adapter: board private structure |
| */ |
| static void atlx_irq_disable(struct atlx_adapter *adapter) |
| { |
| iowrite32(0, adapter->hw.hw_addr + REG_IMR); |
| ioread32(adapter->hw.hw_addr + REG_IMR); |
| synchronize_irq(adapter->pdev->irq); |
| } |
| |
| static void atlx_clear_phy_int(struct atlx_adapter *adapter) |
| { |
| u16 phy_data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&adapter->lock, flags); |
| atlx_read_phy_reg(&adapter->hw, 19, &phy_data); |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| } |
| |
| /* |
| * atlx_tx_timeout - Respond to a Tx Hang |
| * @netdev: network interface device structure |
| */ |
| static void atlx_tx_timeout(struct net_device *netdev) |
| { |
| struct atlx_adapter *adapter = netdev_priv(netdev); |
| /* Do the reset outside of interrupt context */ |
| schedule_work(&adapter->reset_dev_task); |
| } |
| |
| /* |
| * atlx_link_chg_task - deal with link change event Out of interrupt context |
| */ |
| static void atlx_link_chg_task(struct work_struct *work) |
| { |
| struct atlx_adapter *adapter; |
| unsigned long flags; |
| |
| adapter = container_of(work, struct atlx_adapter, link_chg_task); |
| |
| spin_lock_irqsave(&adapter->lock, flags); |
| atlx_check_link(adapter); |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| } |
| |
| static void __atlx_vlan_mode(netdev_features_t features, u32 *ctrl) |
| { |
| if (features & NETIF_F_HW_VLAN_RX) { |
| /* enable VLAN tag insert/strip */ |
| *ctrl |= MAC_CTRL_RMV_VLAN; |
| } else { |
| /* disable VLAN tag insert/strip */ |
| *ctrl &= ~MAC_CTRL_RMV_VLAN; |
| } |
| } |
| |
| static void atlx_vlan_mode(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct atlx_adapter *adapter = netdev_priv(netdev); |
| unsigned long flags; |
| u32 ctrl; |
| |
| spin_lock_irqsave(&adapter->lock, flags); |
| /* atlx_irq_disable(adapter); FIXME: confirm/remove */ |
| ctrl = ioread32(adapter->hw.hw_addr + REG_MAC_CTRL); |
| __atlx_vlan_mode(features, &ctrl); |
| iowrite32(ctrl, adapter->hw.hw_addr + REG_MAC_CTRL); |
| /* atlx_irq_enable(adapter); FIXME */ |
| spin_unlock_irqrestore(&adapter->lock, flags); |
| } |
| |
| static void atlx_restore_vlan(struct atlx_adapter *adapter) |
| { |
| atlx_vlan_mode(adapter->netdev, adapter->netdev->features); |
| } |
| |
| static netdev_features_t atlx_fix_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| /* |
| * Since there is no support for separate rx/tx vlan accel |
| * enable/disable make sure tx flag is always in same state as rx. |
| */ |
| if (features & NETIF_F_HW_VLAN_RX) |
| features |= NETIF_F_HW_VLAN_TX; |
| else |
| features &= ~NETIF_F_HW_VLAN_TX; |
| |
| return features; |
| } |
| |
| static int atlx_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| netdev_features_t changed = netdev->features ^ features; |
| |
| if (changed & NETIF_F_HW_VLAN_RX) |
| atlx_vlan_mode(netdev, features); |
| |
| return 0; |
| } |
| |
| #endif /* ATLX_C */ |