mmc: sdhci-msm: Implement platform_execute_tuning and toggle_cdr callbacks
Implement platform_execute_tuning and toggle_cdr callbacks that are
needed to support HS200 and SDR104 bus speed modes. Also, set
IO_PAD_PWR_SWITCH control bit in vendor specific register if
the IO voltage level is within low voltage range (1.7v - 1.9v).
Change-Id: If41704758d097229ffc0204d581886e137e8b581
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
[xiaonian@codeaurora.org: fix trivial merge conflict]
Signed-off-by: Xiaonian Wang <xiaonian@codeaurora.org>
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index da6304e..928f3c7 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -27,6 +27,11 @@
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/wait.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/mmc/mmc.h>
#include "sdhci-pltfm.h"
@@ -53,6 +58,40 @@
#define CORE_PWRCTL_IO_FAIL (1 << 3)
#define INT_MASK 0xF
+#define MAX_PHASES 16
+
+#define CORE_DLL_LOCK (1 << 7)
+#define CORE_DLL_EN (1 << 16)
+#define CORE_CDR_EN (1 << 17)
+#define CORE_CK_OUT_EN (1 << 18)
+#define CORE_CDR_EXT_EN (1 << 19)
+#define CORE_DLL_PDN (1 << 29)
+#define CORE_DLL_RST (1 << 30)
+#define CORE_DLL_CONFIG 0x100
+#define CORE_DLL_TEST_CTL 0x104
+#define CORE_DLL_STATUS 0x108
+
+#define CORE_VENDOR_SPEC 0x10C
+#define CORE_CLK_PWRSAVE (1 << 1)
+#define CORE_IO_PAD_PWR_SWITCH (1 << 16)
+
+static const u32 tuning_block_64[] = {
+ 0x00FF0FFF, 0xCCC3CCFF, 0xFFCC3CC3, 0xEFFEFFFE,
+ 0xDDFFDFFF, 0xFBFFFBFF, 0xFF7FFFBF, 0xEFBDF777,
+ 0xF0FFF0FF, 0x3CCCFC0F, 0xCFCC33CC, 0xEEFFEFFF,
+ 0xFDFFFDFF, 0xFFBFFFDF, 0xFFF7FFBB, 0xDE7B7FF7
+};
+
+static const u32 tuning_block_128[] = {
+ 0xFF00FFFF, 0x0000FFFF, 0xCCCCFFFF, 0xCCCC33CC,
+ 0xCC3333CC, 0xFFFFCCCC, 0xFFFFEEFF, 0xFFEEEEFF,
+ 0xFFDDFFFF, 0xDDDDFFFF, 0xBBFFFFFF, 0xBBFFFFFF,
+ 0xFFFFFFBB, 0xFFFFFF77, 0x77FF7777, 0xFFEEDDBB,
+ 0x00FFFFFF, 0x00FFFFFF, 0xCCFFFF00, 0xCC33CCCC,
+ 0x3333CCCC, 0xFFCCCCCC, 0xFFEEFFFF, 0xEEEEFFFF,
+ 0xDDFFFFFF, 0xDDFFFFFF, 0xFFFFFFDD, 0xFFFFFFBB,
+ 0xFFFFBBBB, 0xFFFF77FF, 0xFF7777FF, 0xEEDDBB77
+};
/* This structure keeps information per regulator */
struct sdhci_msm_reg_data {
@@ -144,6 +183,403 @@
VDD_IO_SET_LEVEL,
};
+/* MSM platform specific tuning */
+static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host,
+ u8 poll)
+{
+ int rc = 0;
+ u32 wait_cnt = 50;
+ u8 ck_out_en = 0;
+ struct mmc_host *mmc = host->mmc;
+
+ /* poll for CK_OUT_EN bit. max. poll time = 50us */
+ ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
+ CORE_CK_OUT_EN);
+
+ while (ck_out_en != poll) {
+ if (--wait_cnt == 0) {
+ pr_err("%s: %s: CK_OUT_EN bit is not %d\n",
+ mmc_hostname(mmc), __func__, poll);
+ rc = -ETIMEDOUT;
+ goto out;
+ }
+ udelay(1);
+
+ ck_out_en = !!(readl_relaxed(host->ioaddr +
+ CORE_DLL_CONFIG) & CORE_CK_OUT_EN);
+ }
+out:
+ return rc;
+}
+
+static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase)
+{
+ int rc = 0;
+ u8 grey_coded_phase_table[] = {0x0, 0x1, 0x3, 0x2, 0x6, 0x7, 0x5, 0x4,
+ 0xC, 0xD, 0xF, 0xE, 0xA, 0xB, 0x9,
+ 0x8};
+ unsigned long flags;
+ u32 config;
+ struct mmc_host *mmc = host->mmc;
+
+ pr_debug("%s: Enter %s\n", mmc_hostname(mmc), __func__);
+ spin_lock_irqsave(&host->lock, flags);
+
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config &= ~(CORE_CDR_EN | CORE_CK_OUT_EN);
+ config |= (CORE_CDR_EXT_EN | CORE_DLL_EN);
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '0' */
+ rc = msm_dll_poll_ck_out_en(host, 0);
+ if (rc)
+ goto err_out;
+
+ /*
+ * Write the selected DLL clock output phase (0 ... 15)
+ * to CDR_SELEXT bit field of DLL_CONFIG register.
+ */
+ writel_relaxed(((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ & ~(0xF << 20))
+ | (grey_coded_phase_table[phase] << 20)),
+ host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */
+ rc = msm_dll_poll_ck_out_en(host, 1);
+ if (rc)
+ goto err_out;
+
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config |= CORE_CDR_EN;
+ config &= ~CORE_CDR_EXT_EN;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+ goto out;
+
+err_out:
+ pr_err("%s: %s: Failed to set DLL phase: %d\n",
+ mmc_hostname(mmc), __func__, phase);
+out:
+ spin_unlock_irqrestore(&host->lock, flags);
+ pr_debug("%s: Exit %s\n", mmc_hostname(mmc), __func__);
+ return rc;
+}
+
+/*
+ * Find out the greatest range of consecuitive selected
+ * DLL clock output phases that can be used as sampling
+ * setting for SD3.0 UHS-I card read operation (in SDR104
+ * timing mode) or for eMMC4.5 card read operation (in HS200
+ * timing mode).
+ * Select the 3/4 of the range and configure the DLL with the
+ * selected DLL clock output phase.
+ */
+
+static int msm_find_most_appropriate_phase(struct sdhci_host *host,
+ u8 *phase_table, u8 total_phases)
+{
+ int ret;
+ u8 ranges[MAX_PHASES][MAX_PHASES] = { {0}, {0} };
+ u8 phases_per_row[MAX_PHASES] = {0};
+ int row_index = 0, col_index = 0, selected_row_index = 0, curr_max = 0;
+ int i, cnt, phase_0_raw_index = 0, phase_15_raw_index = 0;
+ bool phase_0_found = false, phase_15_found = false;
+ struct mmc_host *mmc = host->mmc;
+
+ pr_debug("%s: Enter %s\n", mmc_hostname(mmc), __func__);
+ if (!total_phases || (total_phases > MAX_PHASES)) {
+ pr_err("%s: %s: invalid argument: total_phases=%d\n",
+ mmc_hostname(mmc), __func__, total_phases);
+ return -EINVAL;
+ }
+
+ for (cnt = 0; cnt < total_phases; cnt++) {
+ ranges[row_index][col_index] = phase_table[cnt];
+ phases_per_row[row_index] += 1;
+ col_index++;
+
+ if ((cnt + 1) == total_phases) {
+ continue;
+ /* check if next phase in phase_table is consecutive or not */
+ } else if ((phase_table[cnt] + 1) != phase_table[cnt + 1]) {
+ row_index++;
+ col_index = 0;
+ }
+ }
+
+ if (row_index >= MAX_PHASES)
+ return -EINVAL;
+
+ /* Check if phase-0 is present in first valid window? */
+ if (!ranges[0][0]) {
+ phase_0_found = true;
+ phase_0_raw_index = 0;
+ /* Check if cycle exist between 2 valid windows */
+ for (cnt = 1; cnt <= row_index; cnt++) {
+ if (phases_per_row[cnt]) {
+ for (i = 0; i < phases_per_row[cnt]; i++) {
+ if (ranges[cnt][i] == 15) {
+ phase_15_found = true;
+ phase_15_raw_index = cnt;
+ break;
+ }
+ }
+ }
+ }
+ }
+
+ /* If 2 valid windows form cycle then merge them as single window */
+ if (phase_0_found && phase_15_found) {
+ /* number of phases in raw where phase 0 is present */
+ u8 phases_0 = phases_per_row[phase_0_raw_index];
+ /* number of phases in raw where phase 15 is present */
+ u8 phases_15 = phases_per_row[phase_15_raw_index];
+
+ if (phases_0 + phases_15 >= MAX_PHASES)
+ /*
+ * If there are more than 1 phase windows then total
+ * number of phases in both the windows should not be
+ * more than or equal to MAX_PHASES.
+ */
+ return -EINVAL;
+
+ /* Merge 2 cyclic windows */
+ i = phases_15;
+ for (cnt = 0; cnt < phases_0; cnt++) {
+ ranges[phase_15_raw_index][i] =
+ ranges[phase_0_raw_index][cnt];
+ if (++i >= MAX_PHASES)
+ break;
+ }
+
+ phases_per_row[phase_0_raw_index] = 0;
+ phases_per_row[phase_15_raw_index] = phases_15 + phases_0;
+ }
+
+ for (cnt = 0; cnt <= row_index; cnt++) {
+ if (phases_per_row[cnt] > curr_max) {
+ curr_max = phases_per_row[cnt];
+ selected_row_index = cnt;
+ }
+ }
+
+ i = ((curr_max * 3) / 4);
+ if (i)
+ i--;
+
+ ret = (int)ranges[selected_row_index][i];
+
+ if (ret >= MAX_PHASES) {
+ ret = -EINVAL;
+ pr_err("%s: %s: invalid phase selected=%d\n",
+ mmc_hostname(mmc), __func__, ret);
+ }
+
+ pr_debug("%s: Exit %s\n", mmc_hostname(mmc), __func__);
+ return ret;
+}
+
+static inline void msm_cm_dll_set_freq(struct sdhci_host *host)
+{
+ u32 mclk_freq = 0;
+
+ /* Program the MCLK value to MCLK_FREQ bit field */
+ if (host->clock <= 112000000)
+ mclk_freq = 0;
+ else if (host->clock <= 125000000)
+ mclk_freq = 1;
+ else if (host->clock <= 137000000)
+ mclk_freq = 2;
+ else if (host->clock <= 150000000)
+ mclk_freq = 3;
+ else if (host->clock <= 162000000)
+ mclk_freq = 4;
+ else if (host->clock <= 175000000)
+ mclk_freq = 5;
+ else if (host->clock <= 187000000)
+ mclk_freq = 6;
+ else if (host->clock <= 200000000)
+ mclk_freq = 7;
+
+ writel_relaxed(((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ & ~(7 << 24)) | (mclk_freq << 24)),
+ host->ioaddr + CORE_DLL_CONFIG);
+}
+
+/* Initialize the DLL (Programmable Delay Line ) */
+static int msm_init_cm_dll(struct sdhci_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+ int rc = 0;
+ unsigned long flags;
+ u32 wait_cnt;
+
+ pr_debug("%s: Enter %s\n", mmc_hostname(mmc), __func__);
+ spin_lock_irqsave(&host->lock, flags);
+
+ /*
+ * Make sure that clock is always enabled when DLL
+ * tuning is in progress. Keeping PWRSAVE ON may
+ * turn off the clock. So let's disable the PWRSAVE
+ * here and re-enable it once tuning is completed.
+ */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC)
+ & ~CORE_CLK_PWRSAVE),
+ host->ioaddr + CORE_VENDOR_SPEC);
+
+ /* Write 1 to DLL_RST bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Write 1 to DLL_PDN bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+ msm_cm_dll_set_freq(host);
+
+ /* Write 0 to DLL_RST bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ & ~CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Write 0 to DLL_PDN bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ & ~CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Set DLL_EN bit to 1. */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_DLL_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Set CK_OUT_EN bit to 1. */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+ wait_cnt = 50;
+ /* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */
+ while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) &
+ CORE_DLL_LOCK)) {
+ /* max. wait for 50us sec for LOCK bit to be set */
+ if (--wait_cnt == 0) {
+ pr_err("%s: %s: DLL failed to LOCK\n",
+ mmc_hostname(mmc), __func__);
+ rc = -ETIMEDOUT;
+ goto out;
+ }
+ /* wait for 1us before polling again */
+ udelay(1);
+ }
+
+out:
+ /* re-enable PWRSAVE */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC) |
+ CORE_CLK_PWRSAVE),
+ host->ioaddr + CORE_VENDOR_SPEC);
+ spin_unlock_irqrestore(&host->lock, flags);
+ pr_debug("%s: Exit %s\n", mmc_hostname(mmc), __func__);
+ return rc;
+}
+
+int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+ unsigned long flags;
+ u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
+ const u32 *tuning_block_pattern = tuning_block_64;
+ int size = sizeof(tuning_block_64); /* Tuning pattern size in bytes */
+ int rc;
+ struct mmc_host *mmc = host->mmc;
+
+ pr_debug("%s: Enter %s\n", mmc_hostname(mmc), __func__);
+ /* Tuning is only required for SDR104 modes */
+ spin_lock_irqsave(&host->lock, flags);
+
+ if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
+ (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
+ tuning_block_pattern = tuning_block_128;
+ size = sizeof(tuning_block_128);
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ /* first of all reset the tuning block */
+ rc = msm_init_cm_dll(host);
+ if (rc)
+ goto out;
+
+ data_buf = kmalloc(size, GFP_KERNEL);
+ if (!data_buf) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ phase = 0;
+ do {
+ struct mmc_command cmd = {0};
+ struct mmc_data data = {0};
+ struct mmc_request mrq = {
+ .cmd = &cmd,
+ .data = &data
+ };
+ struct scatterlist sg;
+
+ /* set the phase in delay line hw block */
+ rc = msm_config_cm_dll_phase(host, phase);
+ if (rc)
+ goto kfree;
+
+ cmd.opcode = opcode;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = size;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.timeout_ns = 1000 * 1000 * 1000; /* 1 sec */
+
+ data.sg = &sg;
+ data.sg_len = 1;
+ sg_init_one(&sg, data_buf, size);
+ memset(data_buf, 0, size);
+ mmc_wait_for_req(mmc, &mrq);
+
+ if (!cmd.error && !data.error &&
+ !memcmp(data_buf, tuning_block_pattern, size)) {
+ /* tuning is successful at this tuning point */
+ tuned_phases[tuned_phase_cnt++] = phase;
+ pr_debug("%s: %s: found good phase = %d\n",
+ mmc_hostname(mmc), __func__, phase);
+ }
+ } while (++phase < 16);
+
+ if (tuned_phase_cnt) {
+ rc = msm_find_most_appropriate_phase(host, tuned_phases,
+ tuned_phase_cnt);
+ if (rc < 0)
+ goto kfree;
+ else
+ phase = (u8)rc;
+
+ /*
+ * Finally set the selected phase in delay
+ * line hw block.
+ */
+ rc = msm_config_cm_dll_phase(host, phase);
+ if (rc)
+ goto kfree;
+ pr_debug("%s: %s: finally setting the tuning phase to %d\n",
+ mmc_hostname(mmc), __func__, phase);
+ } else {
+ /* tuning failed */
+ pr_err("%s: %s: no tuning point found\n",
+ mmc_hostname(mmc), __func__);
+ rc = -EAGAIN;
+ }
+
+kfree:
+ kfree(data_buf);
+out:
+ pr_debug("%s: Exit %s\n", mmc_hostname(mmc), __func__);
+ return rc;
+}
+
static int sdhci_msm_setup_gpio(struct sdhci_msm_pltfm_data *pdata, bool enable)
{
struct sdhci_msm_gpio_data *curr;
@@ -669,7 +1105,9 @@
static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data)
{
- struct sdhci_msm_host *msm_host = (struct sdhci_msm_host *)data;
+ struct sdhci_host *host = (struct sdhci_host *)data;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = pltfm_host->priv;
u8 irq_status = 0;
u8 irq_ack = 0;
int ret = 0;
@@ -735,6 +1173,16 @@
*/
mb();
+ if (irq_status & CORE_PWRCTL_IO_HIGH)
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC) &
+ ~CORE_IO_PAD_PWR_SWITCH),
+ host->ioaddr + CORE_VENDOR_SPEC);
+ if (irq_status & CORE_PWRCTL_IO_LOW)
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC) |
+ CORE_IO_PAD_PWR_SWITCH),
+ host->ioaddr + CORE_VENDOR_SPEC);
+ mb();
+
pr_debug("%s: Handled IRQ(%d), ret=%d, ack=0x%x\n",
mmc_hostname(msm_host->mmc), irq, ret, irq_ack);
wake_up_interruptible(&msm_host->pwr_irq_wait);
@@ -762,8 +1210,22 @@
readb_relaxed(msm_host->core_mem + CORE_PWRCTL_CTL));
}
+static void sdhci_msm_toggle_cdr(struct sdhci_host *host, bool enable)
+{
+ if (enable)
+ writel_relaxed((readl_relaxed(host->ioaddr +
+ CORE_DLL_CONFIG) | CORE_CDR_EN),
+ host->ioaddr + CORE_DLL_CONFIG);
+ else
+ writel_relaxed((readl_relaxed(host->ioaddr +
+ CORE_DLL_CONFIG) & ~CORE_CDR_EN),
+ host->ioaddr + CORE_DLL_CONFIG);
+}
+
static struct sdhci_ops sdhci_msm_ops = {
.check_power_status = sdhci_msm_check_power_status,
+ .platform_execute_tuning = sdhci_msm_execute_tuning,
+ .toggle_cdr = sdhci_msm_toggle_cdr,
};
static int sdhci_msm_probe(struct platform_device *pdev)
@@ -899,7 +1361,7 @@
}
ret = devm_request_threaded_irq(&pdev->dev, pwr_irq, NULL,
sdhci_msm_pwr_irq, IRQF_ONESHOT,
- dev_name(&pdev->dev), msm_host);
+ dev_name(&pdev->dev), host);
if (ret) {
dev_err(&pdev->dev, "Request threaded irq(%d) failed (%d)\n",
pwr_irq, ret);