| /* |
| * mmconfig-shared.c - Low-level direct PCI config space access via |
| * MMCONFIG - common code between i386 and x86-64. |
| * |
| * This code does: |
| * - known chipset handling |
| * - ACPI decoding and validation |
| * |
| * Per-architecture code takes care of the mappings and accesses |
| * themselves. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/acpi.h> |
| #include <linux/sfi_acpi.h> |
| #include <linux/bitmap.h> |
| #include <linux/dmi.h> |
| #include <linux/slab.h> |
| #include <asm/e820.h> |
| #include <asm/pci_x86.h> |
| #include <asm/acpi.h> |
| |
| #define PREFIX "PCI: " |
| |
| /* Indicate if the mmcfg resources have been placed into the resource table. */ |
| static int __initdata pci_mmcfg_resources_inserted; |
| |
| LIST_HEAD(pci_mmcfg_list); |
| |
| static __init void pci_mmconfig_remove(struct pci_mmcfg_region *cfg) |
| { |
| if (cfg->res.parent) |
| release_resource(&cfg->res); |
| list_del(&cfg->list); |
| kfree(cfg); |
| } |
| |
| static __init void free_all_mmcfg(void) |
| { |
| struct pci_mmcfg_region *cfg, *tmp; |
| |
| pci_mmcfg_arch_free(); |
| list_for_each_entry_safe(cfg, tmp, &pci_mmcfg_list, list) |
| pci_mmconfig_remove(cfg); |
| } |
| |
| static __init void list_add_sorted(struct pci_mmcfg_region *new) |
| { |
| struct pci_mmcfg_region *cfg; |
| |
| /* keep list sorted by segment and starting bus number */ |
| list_for_each_entry(cfg, &pci_mmcfg_list, list) { |
| if (cfg->segment > new->segment || |
| (cfg->segment == new->segment && |
| cfg->start_bus >= new->start_bus)) { |
| list_add_tail(&new->list, &cfg->list); |
| return; |
| } |
| } |
| list_add_tail(&new->list, &pci_mmcfg_list); |
| } |
| |
| static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start, |
| int end, u64 addr) |
| { |
| struct pci_mmcfg_region *new; |
| struct resource *res; |
| |
| if (addr == 0) |
| return NULL; |
| |
| new = kzalloc(sizeof(*new), GFP_KERNEL); |
| if (!new) |
| return NULL; |
| |
| new->address = addr; |
| new->segment = segment; |
| new->start_bus = start; |
| new->end_bus = end; |
| |
| list_add_sorted(new); |
| |
| res = &new->res; |
| res->start = addr + PCI_MMCFG_BUS_OFFSET(start); |
| res->end = addr + PCI_MMCFG_BUS_OFFSET(end + 1) - 1; |
| res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; |
| snprintf(new->name, PCI_MMCFG_RESOURCE_NAME_LEN, |
| "PCI MMCONFIG %04x [bus %02x-%02x]", segment, start, end); |
| res->name = new->name; |
| |
| printk(KERN_INFO PREFIX "MMCONFIG for domain %04x [bus %02x-%02x] at " |
| "%pR (base %#lx)\n", segment, start, end, &new->res, |
| (unsigned long) addr); |
| |
| return new; |
| } |
| |
| struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus) |
| { |
| struct pci_mmcfg_region *cfg; |
| |
| list_for_each_entry(cfg, &pci_mmcfg_list, list) |
| if (cfg->segment == segment && |
| cfg->start_bus <= bus && bus <= cfg->end_bus) |
| return cfg; |
| |
| return NULL; |
| } |
| |
| static const char __init *pci_mmcfg_e7520(void) |
| { |
| u32 win; |
| raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0xce, 2, &win); |
| |
| win = win & 0xf000; |
| if (win == 0x0000 || win == 0xf000) |
| return NULL; |
| |
| if (pci_mmconfig_add(0, 0, 255, win << 16) == NULL) |
| return NULL; |
| |
| return "Intel Corporation E7520 Memory Controller Hub"; |
| } |
| |
| static const char __init *pci_mmcfg_intel_945(void) |
| { |
| u32 pciexbar, mask = 0, len = 0; |
| |
| raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0x48, 4, &pciexbar); |
| |
| /* Enable bit */ |
| if (!(pciexbar & 1)) |
| return NULL; |
| |
| /* Size bits */ |
| switch ((pciexbar >> 1) & 3) { |
| case 0: |
| mask = 0xf0000000U; |
| len = 0x10000000U; |
| break; |
| case 1: |
| mask = 0xf8000000U; |
| len = 0x08000000U; |
| break; |
| case 2: |
| mask = 0xfc000000U; |
| len = 0x04000000U; |
| break; |
| default: |
| return NULL; |
| } |
| |
| /* Errata #2, things break when not aligned on a 256Mb boundary */ |
| /* Can only happen in 64M/128M mode */ |
| |
| if ((pciexbar & mask) & 0x0fffffffU) |
| return NULL; |
| |
| /* Don't hit the APIC registers and their friends */ |
| if ((pciexbar & mask) >= 0xf0000000U) |
| return NULL; |
| |
| if (pci_mmconfig_add(0, 0, (len >> 20) - 1, pciexbar & mask) == NULL) |
| return NULL; |
| |
| return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub"; |
| } |
| |
| static const char __init *pci_mmcfg_amd_fam10h(void) |
| { |
| u32 low, high, address; |
| u64 base, msr; |
| int i; |
| unsigned segnbits = 0, busnbits, end_bus; |
| |
| if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF)) |
| return NULL; |
| |
| address = MSR_FAM10H_MMIO_CONF_BASE; |
| if (rdmsr_safe(address, &low, &high)) |
| return NULL; |
| |
| msr = high; |
| msr <<= 32; |
| msr |= low; |
| |
| /* mmconfig is not enable */ |
| if (!(msr & FAM10H_MMIO_CONF_ENABLE)) |
| return NULL; |
| |
| base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT); |
| |
| busnbits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & |
| FAM10H_MMIO_CONF_BUSRANGE_MASK; |
| |
| /* |
| * only handle bus 0 ? |
| * need to skip it |
| */ |
| if (!busnbits) |
| return NULL; |
| |
| if (busnbits > 8) { |
| segnbits = busnbits - 8; |
| busnbits = 8; |
| } |
| |
| end_bus = (1 << busnbits) - 1; |
| for (i = 0; i < (1 << segnbits); i++) |
| if (pci_mmconfig_add(i, 0, end_bus, |
| base + (1<<28) * i) == NULL) { |
| free_all_mmcfg(); |
| return NULL; |
| } |
| |
| return "AMD Family 10h NB"; |
| } |
| |
| static bool __initdata mcp55_checked; |
| static const char __init *pci_mmcfg_nvidia_mcp55(void) |
| { |
| int bus; |
| int mcp55_mmconf_found = 0; |
| |
| static const u32 extcfg_regnum = 0x90; |
| static const u32 extcfg_regsize = 4; |
| static const u32 extcfg_enable_mask = 1<<31; |
| static const u32 extcfg_start_mask = 0xff<<16; |
| static const int extcfg_start_shift = 16; |
| static const u32 extcfg_size_mask = 0x3<<28; |
| static const int extcfg_size_shift = 28; |
| static const int extcfg_sizebus[] = {0x100, 0x80, 0x40, 0x20}; |
| static const u32 extcfg_base_mask[] = {0x7ff8, 0x7ffc, 0x7ffe, 0x7fff}; |
| static const int extcfg_base_lshift = 25; |
| |
| /* |
| * do check if amd fam10h already took over |
| */ |
| if (!acpi_disabled || !list_empty(&pci_mmcfg_list) || mcp55_checked) |
| return NULL; |
| |
| mcp55_checked = true; |
| for (bus = 0; bus < 256; bus++) { |
| u64 base; |
| u32 l, extcfg; |
| u16 vendor, device; |
| int start, size_index, end; |
| |
| raw_pci_ops->read(0, bus, PCI_DEVFN(0, 0), 0, 4, &l); |
| vendor = l & 0xffff; |
| device = (l >> 16) & 0xffff; |
| |
| if (PCI_VENDOR_ID_NVIDIA != vendor || 0x0369 != device) |
| continue; |
| |
| raw_pci_ops->read(0, bus, PCI_DEVFN(0, 0), extcfg_regnum, |
| extcfg_regsize, &extcfg); |
| |
| if (!(extcfg & extcfg_enable_mask)) |
| continue; |
| |
| size_index = (extcfg & extcfg_size_mask) >> extcfg_size_shift; |
| base = extcfg & extcfg_base_mask[size_index]; |
| /* base could > 4G */ |
| base <<= extcfg_base_lshift; |
| start = (extcfg & extcfg_start_mask) >> extcfg_start_shift; |
| end = start + extcfg_sizebus[size_index] - 1; |
| if (pci_mmconfig_add(0, start, end, base) == NULL) |
| continue; |
| mcp55_mmconf_found++; |
| } |
| |
| if (!mcp55_mmconf_found) |
| return NULL; |
| |
| return "nVidia MCP55"; |
| } |
| |
| struct pci_mmcfg_hostbridge_probe { |
| u32 bus; |
| u32 devfn; |
| u32 vendor; |
| u32 device; |
| const char *(*probe)(void); |
| }; |
| |
| static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = { |
| { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL, |
| PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 }, |
| { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL, |
| PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 }, |
| { 0, PCI_DEVFN(0x18, 0), PCI_VENDOR_ID_AMD, |
| 0x1200, pci_mmcfg_amd_fam10h }, |
| { 0xff, PCI_DEVFN(0, 0), PCI_VENDOR_ID_AMD, |
| 0x1200, pci_mmcfg_amd_fam10h }, |
| { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_NVIDIA, |
| 0x0369, pci_mmcfg_nvidia_mcp55 }, |
| }; |
| |
| static void __init pci_mmcfg_check_end_bus_number(void) |
| { |
| struct pci_mmcfg_region *cfg, *cfgx; |
| |
| /* Fixup overlaps */ |
| list_for_each_entry(cfg, &pci_mmcfg_list, list) { |
| if (cfg->end_bus < cfg->start_bus) |
| cfg->end_bus = 255; |
| |
| /* Don't access the list head ! */ |
| if (cfg->list.next == &pci_mmcfg_list) |
| break; |
| |
| cfgx = list_entry(cfg->list.next, typeof(*cfg), list); |
| if (cfg->end_bus >= cfgx->start_bus) |
| cfg->end_bus = cfgx->start_bus - 1; |
| } |
| } |
| |
| static int __init pci_mmcfg_check_hostbridge(void) |
| { |
| u32 l; |
| u32 bus, devfn; |
| u16 vendor, device; |
| int i; |
| const char *name; |
| |
| if (!raw_pci_ops) |
| return 0; |
| |
| free_all_mmcfg(); |
| |
| for (i = 0; i < ARRAY_SIZE(pci_mmcfg_probes); i++) { |
| bus = pci_mmcfg_probes[i].bus; |
| devfn = pci_mmcfg_probes[i].devfn; |
| raw_pci_ops->read(0, bus, devfn, 0, 4, &l); |
| vendor = l & 0xffff; |
| device = (l >> 16) & 0xffff; |
| |
| name = NULL; |
| if (pci_mmcfg_probes[i].vendor == vendor && |
| pci_mmcfg_probes[i].device == device) |
| name = pci_mmcfg_probes[i].probe(); |
| |
| if (name) |
| printk(KERN_INFO PREFIX "%s with MMCONFIG support\n", |
| name); |
| } |
| |
| /* some end_bus_number is crazy, fix it */ |
| pci_mmcfg_check_end_bus_number(); |
| |
| return !list_empty(&pci_mmcfg_list); |
| } |
| |
| static void __init pci_mmcfg_insert_resources(void) |
| { |
| struct pci_mmcfg_region *cfg; |
| |
| list_for_each_entry(cfg, &pci_mmcfg_list, list) |
| insert_resource(&iomem_resource, &cfg->res); |
| |
| /* Mark that the resources have been inserted. */ |
| pci_mmcfg_resources_inserted = 1; |
| } |
| |
| static acpi_status __init check_mcfg_resource(struct acpi_resource *res, |
| void *data) |
| { |
| struct resource *mcfg_res = data; |
| struct acpi_resource_address64 address; |
| acpi_status status; |
| |
| if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) { |
| struct acpi_resource_fixed_memory32 *fixmem32 = |
| &res->data.fixed_memory32; |
| if (!fixmem32) |
| return AE_OK; |
| if ((mcfg_res->start >= fixmem32->address) && |
| (mcfg_res->end < (fixmem32->address + |
| fixmem32->address_length))) { |
| mcfg_res->flags = 1; |
| return AE_CTRL_TERMINATE; |
| } |
| } |
| if ((res->type != ACPI_RESOURCE_TYPE_ADDRESS32) && |
| (res->type != ACPI_RESOURCE_TYPE_ADDRESS64)) |
| return AE_OK; |
| |
| status = acpi_resource_to_address64(res, &address); |
| if (ACPI_FAILURE(status) || |
| (address.address_length <= 0) || |
| (address.resource_type != ACPI_MEMORY_RANGE)) |
| return AE_OK; |
| |
| if ((mcfg_res->start >= address.minimum) && |
| (mcfg_res->end < (address.minimum + address.address_length))) { |
| mcfg_res->flags = 1; |
| return AE_CTRL_TERMINATE; |
| } |
| return AE_OK; |
| } |
| |
| static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl, |
| void *context, void **rv) |
| { |
| struct resource *mcfg_res = context; |
| |
| acpi_walk_resources(handle, METHOD_NAME__CRS, |
| check_mcfg_resource, context); |
| |
| if (mcfg_res->flags) |
| return AE_CTRL_TERMINATE; |
| |
| return AE_OK; |
| } |
| |
| static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used) |
| { |
| struct resource mcfg_res; |
| |
| mcfg_res.start = start; |
| mcfg_res.end = end - 1; |
| mcfg_res.flags = 0; |
| |
| acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL); |
| |
| if (!mcfg_res.flags) |
| acpi_get_devices("PNP0C02", find_mboard_resource, &mcfg_res, |
| NULL); |
| |
| return mcfg_res.flags; |
| } |
| |
| typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type); |
| |
| static int __init is_mmconf_reserved(check_reserved_t is_reserved, |
| struct pci_mmcfg_region *cfg, int with_e820) |
| { |
| u64 addr = cfg->res.start; |
| u64 size = resource_size(&cfg->res); |
| u64 old_size = size; |
| int valid = 0, num_buses; |
| |
| while (!is_reserved(addr, addr + size, E820_RESERVED)) { |
| size >>= 1; |
| if (size < (16UL<<20)) |
| break; |
| } |
| |
| if (size >= (16UL<<20) || size == old_size) { |
| printk(KERN_INFO PREFIX "MMCONFIG at %pR reserved in %s\n", |
| &cfg->res, |
| with_e820 ? "E820" : "ACPI motherboard resources"); |
| valid = 1; |
| |
| if (old_size != size) { |
| /* update end_bus */ |
| cfg->end_bus = cfg->start_bus + ((size>>20) - 1); |
| num_buses = cfg->end_bus - cfg->start_bus + 1; |
| cfg->res.end = cfg->res.start + |
| PCI_MMCFG_BUS_OFFSET(num_buses) - 1; |
| snprintf(cfg->name, PCI_MMCFG_RESOURCE_NAME_LEN, |
| "PCI MMCONFIG %04x [bus %02x-%02x]", |
| cfg->segment, cfg->start_bus, cfg->end_bus); |
| printk(KERN_INFO PREFIX |
| "MMCONFIG for %04x [bus%02x-%02x] " |
| "at %pR (base %#lx) (size reduced!)\n", |
| cfg->segment, cfg->start_bus, cfg->end_bus, |
| &cfg->res, (unsigned long) cfg->address); |
| } |
| } |
| |
| return valid; |
| } |
| |
| static void __init pci_mmcfg_reject_broken(int early) |
| { |
| struct pci_mmcfg_region *cfg; |
| |
| list_for_each_entry(cfg, &pci_mmcfg_list, list) { |
| int valid = 0; |
| |
| if (!early && !acpi_disabled) { |
| valid = is_mmconf_reserved(is_acpi_reserved, cfg, 0); |
| |
| if (valid) |
| continue; |
| else |
| printk(KERN_ERR FW_BUG PREFIX |
| "MMCONFIG at %pR not reserved in " |
| "ACPI motherboard resources\n", |
| &cfg->res); |
| } |
| |
| /* Don't try to do this check unless configuration |
| type 1 is available. how about type 2 ?*/ |
| if (raw_pci_ops) |
| valid = is_mmconf_reserved(e820_all_mapped, cfg, 1); |
| |
| if (!valid) |
| goto reject; |
| } |
| |
| return; |
| |
| reject: |
| printk(KERN_INFO PREFIX "not using MMCONFIG\n"); |
| free_all_mmcfg(); |
| } |
| |
| static int __initdata known_bridge; |
| |
| static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg, |
| struct acpi_mcfg_allocation *cfg) |
| { |
| int year; |
| |
| if (cfg->address < 0xFFFFFFFF) |
| return 0; |
| |
| if (!strcmp(mcfg->header.oem_id, "SGI")) |
| return 0; |
| |
| if (mcfg->header.revision >= 1) { |
| if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && |
| year >= 2010) |
| return 0; |
| } |
| |
| printk(KERN_ERR PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx " |
| "is above 4GB, ignored\n", cfg->pci_segment, |
| cfg->start_bus_number, cfg->end_bus_number, cfg->address); |
| return -EINVAL; |
| } |
| |
| static int __init pci_parse_mcfg(struct acpi_table_header *header) |
| { |
| struct acpi_table_mcfg *mcfg; |
| struct acpi_mcfg_allocation *cfg_table, *cfg; |
| unsigned long i; |
| int entries; |
| |
| if (!header) |
| return -EINVAL; |
| |
| mcfg = (struct acpi_table_mcfg *)header; |
| |
| /* how many config structures do we have */ |
| free_all_mmcfg(); |
| entries = 0; |
| i = header->length - sizeof(struct acpi_table_mcfg); |
| while (i >= sizeof(struct acpi_mcfg_allocation)) { |
| entries++; |
| i -= sizeof(struct acpi_mcfg_allocation); |
| }; |
| if (entries == 0) { |
| printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); |
| return -ENODEV; |
| } |
| |
| cfg_table = (struct acpi_mcfg_allocation *) &mcfg[1]; |
| for (i = 0; i < entries; i++) { |
| cfg = &cfg_table[i]; |
| if (acpi_mcfg_check_entry(mcfg, cfg)) { |
| free_all_mmcfg(); |
| return -ENODEV; |
| } |
| |
| if (pci_mmconfig_add(cfg->pci_segment, cfg->start_bus_number, |
| cfg->end_bus_number, cfg->address) == NULL) { |
| printk(KERN_WARNING PREFIX |
| "no memory for MCFG entries\n"); |
| free_all_mmcfg(); |
| return -ENOMEM; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void __init __pci_mmcfg_init(int early) |
| { |
| /* MMCONFIG disabled */ |
| if ((pci_probe & PCI_PROBE_MMCONF) == 0) |
| return; |
| |
| /* MMCONFIG already enabled */ |
| if (!early && !(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF)) |
| return; |
| |
| /* for late to exit */ |
| if (known_bridge) |
| return; |
| |
| if (early) { |
| if (pci_mmcfg_check_hostbridge()) |
| known_bridge = 1; |
| } |
| |
| if (!known_bridge) |
| acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg); |
| |
| pci_mmcfg_reject_broken(early); |
| |
| if (list_empty(&pci_mmcfg_list)) |
| return; |
| |
| if (pcibios_last_bus < 0) { |
| const struct pci_mmcfg_region *cfg; |
| |
| list_for_each_entry(cfg, &pci_mmcfg_list, list) { |
| if (cfg->segment) |
| break; |
| pcibios_last_bus = cfg->end_bus; |
| } |
| } |
| |
| if (pci_mmcfg_arch_init()) |
| pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; |
| else { |
| /* |
| * Signal not to attempt to insert mmcfg resources because |
| * the architecture mmcfg setup could not initialize. |
| */ |
| pci_mmcfg_resources_inserted = 1; |
| } |
| } |
| |
| void __init pci_mmcfg_early_init(void) |
| { |
| __pci_mmcfg_init(1); |
| } |
| |
| void __init pci_mmcfg_late_init(void) |
| { |
| __pci_mmcfg_init(0); |
| } |
| |
| static int __init pci_mmcfg_late_insert_resources(void) |
| { |
| /* |
| * If resources are already inserted or we are not using MMCONFIG, |
| * don't insert the resources. |
| */ |
| if ((pci_mmcfg_resources_inserted == 1) || |
| (pci_probe & PCI_PROBE_MMCONF) == 0 || |
| list_empty(&pci_mmcfg_list)) |
| return 1; |
| |
| /* |
| * Attempt to insert the mmcfg resources but not with the busy flag |
| * marked so it won't cause request errors when __request_region is |
| * called. |
| */ |
| pci_mmcfg_insert_resources(); |
| |
| return 0; |
| } |
| |
| /* |
| * Perform MMCONFIG resource insertion after PCI initialization to allow for |
| * misprogrammed MCFG tables that state larger sizes but actually conflict |
| * with other system resources. |
| */ |
| late_initcall(pci_mmcfg_late_insert_resources); |