[ALSA] hda_proc - Add a number of new settings to proc codec output
This patch adds additional output to the /proc codec#X info.
The following pieces of information are added to the output:
- Balanced, L/R swap, trigger, impedance sense pin capabilities
- Vref pin capabilities
- Current Vref pin widget control setting
- Default configuration association, sequence, and misc bit test
- EAPD/BTL bits conveying balanced mode, EAPD, and L/R swap
- Power state modified to show state name as well as setting vs actual value
- GPIO parameter output on Audio Function Group, including enumeration of IO
pins which are indicated present (Any I and O pins are not output at this
time)
- Stripe and L/R swap widget capabilities
- All digital converter bits: enable, validity, validity config, preemphasis,
copyright, non-audio, professional, generation level, and content category
- Converter stream and channel values for in/out widgets
- SDI select value for in widgets
- Unsolicited response widget capability tag and enabled bit
- Delay widget capability value
- Processing widget capability benign bit and number of coefficients
- Realtek Define Registers: processing coefficient, coefficient index
[Also, fixed space/tab issues and make codes a bit more readable
-- Takashi]
Signed-off-by: Andrew Paprocki <andrew@ishiboo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 719e46f..eb4a2ae 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -84,7 +84,9 @@
#define AC_VERB_GET_GPIO_DATA 0x0f15
#define AC_VERB_GET_GPIO_MASK 0x0f16
#define AC_VERB_GET_GPIO_DIRECTION 0x0f17
+#define AC_VERB_GET_GPIO_WAKE_MASK 0x0f18
#define AC_VERB_GET_GPIO_UNSOLICITED_RSP_MASK 0x0f19
+#define AC_VERB_GET_GPIO_STICKY_MASK 0x0f1a
#define AC_VERB_GET_CONFIG_DEFAULT 0x0f1c
/* f20: AFG/MFG */
#define AC_VERB_GET_SUBSYSTEM_ID 0x0f20
@@ -112,7 +114,9 @@
#define AC_VERB_SET_GPIO_DATA 0x715
#define AC_VERB_SET_GPIO_MASK 0x716
#define AC_VERB_SET_GPIO_DIRECTION 0x717
+#define AC_VERB_SET_GPIO_WAKE_MASK 0x718
#define AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK 0x719
+#define AC_VERB_SET_GPIO_STICKY_MASK 0x71a
#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 0x71c
#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 0x71d
#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 0x71e
@@ -185,6 +189,27 @@
#define AC_SUPFMT_FLOAT32 (1<<1)
#define AC_SUPFMT_AC3 (1<<2)
+/* GP I/O count */
+#define AC_GPIO_IO_COUNT (0xff<<0)
+#define AC_GPIO_O_COUNT (0xff<<8)
+#define AC_GPIO_O_COUNT_SHIFT 8
+#define AC_GPIO_I_COUNT (0xff<<16)
+#define AC_GPIO_I_COUNT_SHIFT 16
+#define AC_GPIO_UNSOLICITED (1<<30)
+#define AC_GPIO_WAKE (1<<31)
+
+/* Converter stream, channel */
+#define AC_CONV_CHANNEL (0xf<<0)
+#define AC_CONV_STREAM (0xf<<4)
+#define AC_CONV_STREAM_SHIFT 4
+
+/* Input converter SDI select */
+#define AC_SDI_SELECT (0xf<<0)
+
+/* Unsolicited response */
+#define AC_UNSOL_TAG (0x3f<<0)
+#define AC_UNSOL_ENABLED (1<<7)
+
/* Pin widget capabilies */
#define AC_PINCAP_IMP_SENSE (1<<0) /* impedance sense capable */
#define AC_PINCAP_TRIG_REQ (1<<1) /* trigger required */
@@ -230,6 +255,9 @@
#define AC_PWRST_D3SUP (1<<3)
/* Power state values */
+#define AC_PWRST_SETTING (0xf<<0)
+#define AC_PWRST_ACTUAL (0xf<<4)
+#define AC_PWRST_ACTUAL_SHIFT 4
#define AC_PWRST_D0 0x00
#define AC_PWRST_D1 0x01
#define AC_PWRST_D2 0x02
@@ -238,6 +266,7 @@
/* Processing capabilies */
#define AC_PCAP_BENIGN (1<<0)
#define AC_PCAP_NUM_COEF (0xff<<8)
+#define AC_PCAP_NUM_COEF_SHIFT 8
/* Volume knobs capabilities */
#define AC_KNBCAP_NUM_STEPS (0x7f<<0)
@@ -274,6 +303,9 @@
#define AC_DIG1_PROFESSIONAL (1<<6)
#define AC_DIG1_LEVEL (1<<7)
+/* DIGITAL2 bits */
+#define AC_DIG2_CC (0x7f<<0)
+
/* Pin widget control - 8bit */
#define AC_PINCTL_VREFEN (0x7<<0)
#define AC_PINCTL_VREF_HIZ 0 /* Hi-Z */
@@ -288,12 +320,22 @@
/* Unsolicited response - 8bit */
#define AC_USRSP_EN (1<<7)
+/* Pin sense - 32bit */
+#define AC_PINSENSE_IMPEDANCE_MASK (0x7fffffff)
+#define AC_PINSENSE_PRESENCE (1<<31)
+
+/* EAPD/BTL enable - 32bit */
+#define AC_EAPDBTL_BALANCED (1<<0)
+#define AC_EAPDBTL_EAPD (1<<1)
+#define AC_EAPDBTL_LR_SWAP (1<<2)
+
/* configuration default - 32bit */
#define AC_DEFCFG_SEQUENCE (0xf<<0)
#define AC_DEFCFG_DEF_ASSOC (0xf<<4)
#define AC_DEFCFG_ASSOC_SHIFT 4
#define AC_DEFCFG_MISC (0xf<<8)
#define AC_DEFCFG_MISC_SHIFT 8
+#define AC_DEFCFG_MISC_NO_PRESENCE (1<<0)
#define AC_DEFCFG_COLOR (0xf<<12)
#define AC_DEFCFG_COLOR_SHIFT 12
#define AC_DEFCFG_CONN_TYPE (0xf<<16)