diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f3a06b4..5107cee 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3456,6 +3456,9 @@
 #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG		0x9030
 #define  GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB	(1<<11)
 
+#define HSW_FUSE_STRAP		0x42014
+#define  HSW_CDCLK_LIMIT	(1 << 24)
+
 /* PCH */
 
 /* south display engine interrupt: IBX */
@@ -4531,8 +4534,11 @@
 #define LCPLL_CTL			0x130040
 #define  LCPLL_PLL_DISABLE		(1<<31)
 #define  LCPLL_PLL_LOCK			(1<<30)
+#define  LCPLL_CLK_FREQ_MASK		(3<<26)
+#define  LCPLL_CLK_FREQ_450		(0<<26)
 #define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
 #define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
+#define  LCPLL_CD_SOURCE_FCLK		(1<<21)
 
 /* Pipe WM_LINETIME - watermark line time */
 #define PIPE_WM_LINETIME_A		0x45270
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index bfe3754..187ea3b 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -682,12 +682,6 @@
 	DRM_DEBUG_KMS("WR PLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n",
 		      crtc->mode.clock, p, n2, r2);
 
-	/* Enable LCPLL if disabled */
-	temp = I915_READ(LCPLL_CTL);
-	if (temp & LCPLL_PLL_DISABLE)
-		I915_WRITE(LCPLL_CTL,
-				temp & ~LCPLL_PLL_DISABLE);
-
 	/* Configure WR PLL 1, program the correct divider values for
 	 * the desired frequency and wait for warmup */
 	I915_WRITE(WRPLL_CTL1,
@@ -817,3 +811,34 @@
 
 	I915_WRITE(DDI_BUF_CTL(port), temp);
 }
+
+static int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
+{
+	if (I915_READ(HSW_FUSE_STRAP) & HSW_CDCLK_LIMIT)
+		return 450;
+	else if ((I915_READ(LCPLL_CTL) & LCPLL_CLK_FREQ_MASK) ==
+		 LCPLL_CLK_FREQ_450)
+		return 450;
+	else
+		return 540;
+}
+
+void intel_ddi_pll_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val = I915_READ(LCPLL_CTL);
+
+	/* The LCPLL register should be turned on by the BIOS. For now let's
+	 * just check its state and print errors in case something is wrong.
+	 * Don't even try to turn it on.
+	 */
+
+	DRM_DEBUG_KMS("CDCLK running at %dMHz\n",
+		      intel_ddi_get_cdclk_freq(dev_priv));
+
+	if (val & LCPLL_CD_SOURCE_FCLK)
+		DRM_ERROR("CDCLK source is not LCPLL\n");
+
+	if (val & LCPLL_PLL_DISABLE)
+		DRM_ERROR("LCPLL is disabled\n");
+}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6cf0d00..40f98d1 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7477,6 +7477,12 @@
 	.page_flip = intel_crtc_page_flip,
 };
 
+static void intel_cpu_pll_init(struct drm_device *dev)
+{
+	if (IS_HASWELL(dev))
+		intel_ddi_pll_init(dev);
+}
+
 static void intel_pch_pll_init(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -8085,6 +8091,7 @@
 			DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
 	}
 
+	intel_cpu_pll_init(dev);
 	intel_pch_pll_init(dev);
 
 	/* Just disable it once at startup */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 79f8ed6..57566b7 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -580,5 +580,6 @@
 extern void intel_ddi_mode_set(struct drm_encoder *encoder,
 				struct drm_display_mode *mode,
 				struct drm_display_mode *adjusted_mode);
+extern void intel_ddi_pll_init(struct drm_device *dev);
 
 #endif /* __INTEL_DRV_H__ */