nl80211: Fix checkpatch warnings about blank lines
This patch fixes the following checkpatch.pl issues -
- Please don't use multiple blank lines
- Blank lines aren't necessary before a close brace
- Missing a blank line after declarations
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index cf588f1..0d7db10 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -167,6 +167,7 @@
if (attrs[NL80211_ATTR_IFINDEX]) {
int ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
+
netdev = __dev_get_by_index(netns, ifindex);
if (netdev) {
if (netdev->ieee80211_ptr)
@@ -731,6 +732,7 @@
if (tb[NL80211_KEY_DEFAULT_TYPES]) {
struct nlattr *kdt[NUM_NL80211_KEY_DEFAULT_TYPES];
+
err = nla_parse_nested(kdt, NUM_NL80211_KEY_DEFAULT_TYPES - 1,
tb[NL80211_KEY_DEFAULT_TYPES],
nl80211_key_default_policy);
@@ -1382,6 +1384,7 @@
rdev->ops->get_antenna) {
u32 tx_ant = 0, rx_ant = 0;
int res;
+
res = rdev_get_antenna(rdev, &tx_ant, &rx_ant);
if (!res) {
if (nla_put_u32(msg,
@@ -2157,7 +2160,6 @@
return rdev_set_wds_peer(rdev, dev, bssid);
}
-
static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
@@ -2292,6 +2294,7 @@
if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
u32 tx_ant, rx_ant;
+
if ((!rdev->wiphy.available_antennas_tx &&
!rdev->wiphy.available_antennas_rx) ||
!rdev->ops->set_antenna)
@@ -2960,6 +2963,7 @@
pairwise = !!mac_addr;
if (info->attrs[NL80211_ATTR_KEY_TYPE]) {
u32 kt = nla_get_u32(info->attrs[NL80211_ATTR_KEY_TYPE]);
+
if (kt >= NUM_NL80211_KEYTYPES)
return -EINVAL;
if (kt != NL80211_KEYTYPE_GROUP &&
@@ -4003,7 +4007,6 @@
sta_idx++;
}
-
out:
cb->args[2] = sta_idx;
err = skb->len;
@@ -4804,7 +4807,6 @@
path_idx++;
}
-
out:
cb->args[2] = path_idx;
err = skb->len;
@@ -5094,7 +5096,6 @@
enum nl80211_user_reg_hint_type user_reg_hint_type;
u32 owner_nlportid;
-
/*
* You should only get this when cfg80211 hasn't yet initialized
* completely when built-in to the kernel right between the time
@@ -5303,7 +5304,6 @@
} \
} while (0)
-
if (!info->attrs[NL80211_ATTR_MESH_CONFIG])
return -EINVAL;
if (nla_parse_nested(tb, NL80211_MESHCONF_ATTR_MAX,
@@ -5450,7 +5450,6 @@
IEEE80211_PATH_METRIC_VENDOR :
IEEE80211_PATH_METRIC_AIRTIME;
-
if (tb[NL80211_MESH_SETUP_IE]) {
struct nlattr *ieattr =
tb[NL80211_MESH_SETUP_IE];
@@ -6074,6 +6073,7 @@
/* all channels */
for (band = 0; band < NUM_NL80211_BANDS; band++) {
int j;
+
if (!wiphy->bands[band])
continue;
for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
@@ -6483,6 +6483,7 @@
/* all channels */
for (band = 0; band < NUM_NL80211_BANDS; band++) {
int j;
+
if (!wiphy->bands[band])
continue;
for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
@@ -7245,6 +7246,7 @@
if (key.idx >= 0) {
int i;
bool ok = false;
+
for (i = 0; i < rdev->wiphy.n_cipher_suites; i++) {
if (key.p.cipher == rdev->wiphy.cipher_suites[i]) {
ok = true;
@@ -7323,6 +7325,7 @@
if (info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]) {
u16 proto;
+
proto = nla_get_u16(
info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]);
settings->control_port_ethertype = cpu_to_be16(proto);
@@ -8476,6 +8479,7 @@
for (i = 0; i < rates_len; i++) {
int rate = (rates[i] & 0x7f) * 5;
int ridx;
+
for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
struct ieee80211_rate *srate =
&sband->bitrates[ridx];
@@ -8784,7 +8788,6 @@
if (params.wait < NL80211_MIN_REMAIN_ON_CHANNEL_TIME ||
params.wait > rdev->wiphy.max_remain_on_channel_duration)
return -EINVAL;
-
}
params.offchan = info->attrs[NL80211_ATTR_OFFCHANNEL_TX_OK];
@@ -10631,7 +10634,6 @@
}
EXPORT_SYMBOL_GPL(cfg80211_vendor_cmd_reply);
-
static int nl80211_set_qos_map(struct sk_buff *skb,
struct genl_info *info)
{
@@ -12170,7 +12172,6 @@
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
-
}
void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
@@ -12209,7 +12210,6 @@
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
-
}
void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
@@ -12247,7 +12247,6 @@
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
-
}
void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
@@ -13589,7 +13588,6 @@
if (hdr)
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
-
}
EXPORT_SYMBOL(cfg80211_crit_proto_stopped);