[SCSI] be2iscsi: Fix Unrecoverable Error Detection
Driver periodically checks adapter state,is up fine or not.
Based on the value updates the internal structures of driver.
Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 688bf64..a6c2fe4 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -22,6 +22,138 @@
#include <scsi/scsi_bsg_iscsi.h>
#include "be_mgmt.h"
#include "be_iscsi.h"
+#include "be_main.h"
+
+/* UE Status Low CSR */
+static const char * const desc_ue_status_low[] = {
+ "CEV",
+ "CTX",
+ "DBUF",
+ "ERX",
+ "Host",
+ "MPU",
+ "NDMA",
+ "PTC ",
+ "RDMA ",
+ "RXF ",
+ "RXIPS ",
+ "RXULP0 ",
+ "RXULP1 ",
+ "RXULP2 ",
+ "TIM ",
+ "TPOST ",
+ "TPRE ",
+ "TXIPS ",
+ "TXULP0 ",
+ "TXULP1 ",
+ "UC ",
+ "WDMA ",
+ "TXULP2 ",
+ "HOST1 ",
+ "P0_OB_LINK ",
+ "P1_OB_LINK ",
+ "HOST_GPIO ",
+ "MBOX ",
+ "AXGMAC0",
+ "AXGMAC1",
+ "JTAG",
+ "MPU_INTPEND"
+};
+
+/* UE Status High CSR */
+static const char * const desc_ue_status_hi[] = {
+ "LPCMEMHOST",
+ "MGMT_MAC",
+ "PCS0ONLINE",
+ "MPU_IRAM",
+ "PCS1ONLINE",
+ "PCTL0",
+ "PCTL1",
+ "PMEM",
+ "RR",
+ "TXPB",
+ "RXPP",
+ "XAUI",
+ "TXP",
+ "ARM",
+ "IPC",
+ "HOST2",
+ "HOST3",
+ "HOST4",
+ "HOST5",
+ "HOST6",
+ "HOST7",
+ "HOST8",
+ "HOST9",
+ "NETC",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown"
+};
+
+/*
+ * beiscsi_ue_detec()- Detect Unrecoverable Error on adapter
+ * @phba: Driver priv structure
+ *
+ * Read registers linked to UE and check for the UE status
+ **/
+void beiscsi_ue_detect(struct beiscsi_hba *phba)
+{
+ uint32_t ue_hi = 0, ue_lo = 0;
+ uint32_t ue_mask_hi = 0, ue_mask_lo = 0;
+ uint8_t i = 0;
+
+ if (phba->ue_detected)
+ return;
+
+ pci_read_config_dword(phba->pcidev,
+ PCICFG_UE_STATUS_LOW, &ue_lo);
+ pci_read_config_dword(phba->pcidev,
+ PCICFG_UE_STATUS_MASK_LOW,
+ &ue_mask_lo);
+ pci_read_config_dword(phba->pcidev,
+ PCICFG_UE_STATUS_HIGH,
+ &ue_hi);
+ pci_read_config_dword(phba->pcidev,
+ PCICFG_UE_STATUS_MASK_HI,
+ &ue_mask_hi);
+
+ ue_lo = (ue_lo & ~ue_mask_lo);
+ ue_hi = (ue_hi & ~ue_mask_hi);
+
+
+ if (ue_lo || ue_hi) {
+ phba->ue_detected = true;
+ beiscsi_log(phba, KERN_ERR,
+ BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
+ "BG_%d : Error detected on the adapter\n");
+ }
+
+ if (ue_lo) {
+ for (i = 0; ue_lo; ue_lo >>= 1, i++) {
+ if (ue_lo & 1)
+ beiscsi_log(phba, KERN_ERR,
+ BEISCSI_LOG_CONFIG,
+ "BG_%d : UE_LOW %s bit set\n",
+ desc_ue_status_low[i]);
+ }
+ }
+
+ if (ue_hi) {
+ for (i = 0; ue_hi; ue_hi >>= 1, i++) {
+ if (ue_hi & 1)
+ beiscsi_log(phba, KERN_ERR,
+ BEISCSI_LOG_CONFIG,
+ "BG_%d : UE_HIGH %s bit set\n",
+ desc_ue_status_hi[i]);
+ }
+ }
+}
/**
* mgmt_reopen_session()- Reopen a session based on reopen_type