| /* |
| * pSeries_lpar.c |
| * Copyright (C) 2001 Todd Inglett, IBM Corporation |
| * |
| * pSeries LPAR support. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* Enables debugging of low-level hash table routines - careful! */ |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/console.h> |
| #include <asm/processor.h> |
| #include <asm/mmu.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/machdep.h> |
| #include <asm/abs_addr.h> |
| #include <asm/mmu_context.h> |
| #include <asm/iommu.h> |
| #include <asm/tlbflush.h> |
| #include <asm/tlb.h> |
| #include <asm/prom.h> |
| #include <asm/cputable.h> |
| #include <asm/udbg.h> |
| #include <asm/smp.h> |
| |
| #include "plpar_wrappers.h" |
| #include "pseries.h" |
| |
| |
| /* in hvCall.S */ |
| EXPORT_SYMBOL(plpar_hcall); |
| EXPORT_SYMBOL(plpar_hcall9); |
| EXPORT_SYMBOL(plpar_hcall_norets); |
| |
| extern void pSeries_find_serial_port(void); |
| |
| |
| static int vtermno; /* virtual terminal# for udbg */ |
| |
| #define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) |
| static void udbg_hvsi_putc(char c) |
| { |
| /* packet's seqno isn't used anyways */ |
| uint8_t packet[] __ALIGNED__ = { 0xff, 5, 0, 0, c }; |
| int rc; |
| |
| if (c == '\n') |
| udbg_hvsi_putc('\r'); |
| |
| do { |
| rc = plpar_put_term_char(vtermno, sizeof(packet), packet); |
| } while (rc == H_BUSY); |
| } |
| |
| static long hvsi_udbg_buf_len; |
| static uint8_t hvsi_udbg_buf[256]; |
| |
| static int udbg_hvsi_getc_poll(void) |
| { |
| unsigned char ch; |
| int rc, i; |
| |
| if (hvsi_udbg_buf_len == 0) { |
| rc = plpar_get_term_char(vtermno, &hvsi_udbg_buf_len, hvsi_udbg_buf); |
| if (rc != H_SUCCESS || hvsi_udbg_buf[0] != 0xff) { |
| /* bad read or non-data packet */ |
| hvsi_udbg_buf_len = 0; |
| } else { |
| /* remove the packet header */ |
| for (i = 4; i < hvsi_udbg_buf_len; i++) |
| hvsi_udbg_buf[i-4] = hvsi_udbg_buf[i]; |
| hvsi_udbg_buf_len -= 4; |
| } |
| } |
| |
| if (hvsi_udbg_buf_len <= 0 || hvsi_udbg_buf_len > 256) { |
| /* no data ready */ |
| hvsi_udbg_buf_len = 0; |
| return -1; |
| } |
| |
| ch = hvsi_udbg_buf[0]; |
| /* shift remaining data down */ |
| for (i = 1; i < hvsi_udbg_buf_len; i++) { |
| hvsi_udbg_buf[i-1] = hvsi_udbg_buf[i]; |
| } |
| hvsi_udbg_buf_len--; |
| |
| return ch; |
| } |
| |
| static int udbg_hvsi_getc(void) |
| { |
| int ch; |
| for (;;) { |
| ch = udbg_hvsi_getc_poll(); |
| if (ch == -1) { |
| /* This shouldn't be needed...but... */ |
| volatile unsigned long delay; |
| for (delay=0; delay < 2000000; delay++) |
| ; |
| } else { |
| return ch; |
| } |
| } |
| } |
| |
| static void udbg_putcLP(char c) |
| { |
| char buf[16]; |
| unsigned long rc; |
| |
| if (c == '\n') |
| udbg_putcLP('\r'); |
| |
| buf[0] = c; |
| do { |
| rc = plpar_put_term_char(vtermno, 1, buf); |
| } while(rc == H_BUSY); |
| } |
| |
| /* Buffered chars getc */ |
| static long inbuflen; |
| static long inbuf[2]; /* must be 2 longs */ |
| |
| static int udbg_getc_pollLP(void) |
| { |
| /* The interface is tricky because it may return up to 16 chars. |
| * We save them statically for future calls to udbg_getc(). |
| */ |
| char ch, *buf = (char *)inbuf; |
| int i; |
| long rc; |
| if (inbuflen == 0) { |
| /* get some more chars. */ |
| inbuflen = 0; |
| rc = plpar_get_term_char(vtermno, &inbuflen, buf); |
| if (rc != H_SUCCESS) |
| inbuflen = 0; /* otherwise inbuflen is garbage */ |
| } |
| if (inbuflen <= 0 || inbuflen > 16) { |
| /* Catch error case as well as other oddities (corruption) */ |
| inbuflen = 0; |
| return -1; |
| } |
| ch = buf[0]; |
| for (i = 1; i < inbuflen; i++) /* shuffle them down. */ |
| buf[i-1] = buf[i]; |
| inbuflen--; |
| return ch; |
| } |
| |
| static int udbg_getcLP(void) |
| { |
| int ch; |
| for (;;) { |
| ch = udbg_getc_pollLP(); |
| if (ch == -1) { |
| /* This shouldn't be needed...but... */ |
| volatile unsigned long delay; |
| for (delay=0; delay < 2000000; delay++) |
| ; |
| } else { |
| return ch; |
| } |
| } |
| } |
| |
| /* call this from early_init() for a working debug console on |
| * vterm capable LPAR machines |
| */ |
| void __init udbg_init_debug_lpar(void) |
| { |
| vtermno = 0; |
| udbg_putc = udbg_putcLP; |
| udbg_getc = udbg_getcLP; |
| udbg_getc_poll = udbg_getc_pollLP; |
| |
| register_early_udbg_console(); |
| } |
| |
| /* returns 0 if couldn't find or use /chosen/stdout as console */ |
| void __init find_udbg_vterm(void) |
| { |
| struct device_node *stdout_node; |
| const u32 *termno; |
| const char *name; |
| |
| /* find the boot console from /chosen/stdout */ |
| if (!of_chosen) |
| return; |
| name = of_get_property(of_chosen, "linux,stdout-path", NULL); |
| if (name == NULL) |
| return; |
| stdout_node = of_find_node_by_path(name); |
| if (!stdout_node) |
| return; |
| name = of_get_property(stdout_node, "name", NULL); |
| if (!name) { |
| printk(KERN_WARNING "stdout node missing 'name' property!\n"); |
| goto out; |
| } |
| |
| /* Check if it's a virtual terminal */ |
| if (strncmp(name, "vty", 3) != 0) |
| goto out; |
| termno = of_get_property(stdout_node, "reg", NULL); |
| if (termno == NULL) |
| goto out; |
| vtermno = termno[0]; |
| |
| if (of_device_is_compatible(stdout_node, "hvterm1")) { |
| udbg_putc = udbg_putcLP; |
| udbg_getc = udbg_getcLP; |
| udbg_getc_poll = udbg_getc_pollLP; |
| add_preferred_console("hvc", termno[0] & 0xff, NULL); |
| } else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) { |
| vtermno = termno[0]; |
| udbg_putc = udbg_hvsi_putc; |
| udbg_getc = udbg_hvsi_getc; |
| udbg_getc_poll = udbg_hvsi_getc_poll; |
| add_preferred_console("hvsi", termno[0] & 0xff, NULL); |
| } |
| out: |
| of_node_put(stdout_node); |
| } |
| |
| void vpa_init(int cpu) |
| { |
| int hwcpu = get_hard_smp_processor_id(cpu); |
| unsigned long addr; |
| long ret; |
| |
| if (cpu_has_feature(CPU_FTR_ALTIVEC)) |
| lppaca[cpu].vmxregs_in_use = 1; |
| |
| addr = __pa(&lppaca[cpu]); |
| ret = register_vpa(hwcpu, addr); |
| |
| if (ret) { |
| printk(KERN_ERR "WARNING: vpa_init: VPA registration for " |
| "cpu %d (hw %d) of area %lx returns %ld\n", |
| cpu, hwcpu, addr, ret); |
| return; |
| } |
| /* |
| * PAPR says this feature is SLB-Buffer but firmware never |
| * reports that. All SPLPAR support SLB shadow buffer. |
| */ |
| addr = __pa(&slb_shadow[cpu]); |
| if (firmware_has_feature(FW_FEATURE_SPLPAR)) { |
| ret = register_slb_shadow(hwcpu, addr); |
| if (ret) |
| printk(KERN_ERR |
| "WARNING: vpa_init: SLB shadow buffer " |
| "registration for cpu %d (hw %d) of area %lx " |
| "returns %ld\n", cpu, hwcpu, addr, ret); |
| } |
| } |
| |
| static long pSeries_lpar_hpte_insert(unsigned long hpte_group, |
| unsigned long va, unsigned long pa, |
| unsigned long rflags, unsigned long vflags, |
| int psize, int ssize) |
| { |
| unsigned long lpar_rc; |
| unsigned long flags; |
| unsigned long slot; |
| unsigned long hpte_v, hpte_r; |
| |
| if (!(vflags & HPTE_V_BOLTED)) |
| pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " |
| "rflags=%lx, vflags=%lx, psize=%d)\n", |
| hpte_group, va, pa, rflags, vflags, psize); |
| |
| hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID; |
| hpte_r = hpte_encode_r(pa, psize) | rflags; |
| |
| if (!(vflags & HPTE_V_BOLTED)) |
| pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); |
| |
| /* Now fill in the actual HPTE */ |
| /* Set CEC cookie to 0 */ |
| /* Zero page = 0 */ |
| /* I-cache Invalidate = 0 */ |
| /* I-cache synchronize = 0 */ |
| /* Exact = 0 */ |
| flags = 0; |
| |
| /* Make pHyp happy */ |
| if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU)) |
| hpte_r &= ~_PAGE_COHERENT; |
| |
| lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot); |
| if (unlikely(lpar_rc == H_PTEG_FULL)) { |
| if (!(vflags & HPTE_V_BOLTED)) |
| pr_debug(" full\n"); |
| return -1; |
| } |
| |
| /* |
| * Since we try and ioremap PHBs we don't own, the pte insert |
| * will fail. However we must catch the failure in hash_page |
| * or we will loop forever, so return -2 in this case. |
| */ |
| if (unlikely(lpar_rc != H_SUCCESS)) { |
| if (!(vflags & HPTE_V_BOLTED)) |
| pr_debug(" lpar err %lu\n", lpar_rc); |
| return -2; |
| } |
| if (!(vflags & HPTE_V_BOLTED)) |
| pr_debug(" -> slot: %lu\n", slot & 7); |
| |
| /* Because of iSeries, we have to pass down the secondary |
| * bucket bit here as well |
| */ |
| return (slot & 7) | (!!(vflags & HPTE_V_SECONDARY) << 3); |
| } |
| |
| static DEFINE_SPINLOCK(pSeries_lpar_tlbie_lock); |
| |
| static long pSeries_lpar_hpte_remove(unsigned long hpte_group) |
| { |
| unsigned long slot_offset; |
| unsigned long lpar_rc; |
| int i; |
| unsigned long dummy1, dummy2; |
| |
| /* pick a random slot to start at */ |
| slot_offset = mftb() & 0x7; |
| |
| for (i = 0; i < HPTES_PER_GROUP; i++) { |
| |
| /* don't remove a bolted entry */ |
| lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset, |
| (0x1UL << 4), &dummy1, &dummy2); |
| if (lpar_rc == H_SUCCESS) |
| return i; |
| BUG_ON(lpar_rc != H_NOT_FOUND); |
| |
| slot_offset++; |
| slot_offset &= 0x7; |
| } |
| |
| return -1; |
| } |
| |
| static void pSeries_lpar_hptab_clear(void) |
| { |
| unsigned long size_bytes = 1UL << ppc64_pft_size; |
| unsigned long hpte_count = size_bytes >> 4; |
| unsigned long dummy1, dummy2, dword0; |
| long lpar_rc; |
| int i; |
| |
| /* TODO: Use bulk call */ |
| for (i = 0; i < hpte_count; i++) { |
| /* dont remove HPTEs with VRMA mappings */ |
| lpar_rc = plpar_pte_remove_raw(H_ANDCOND, i, HPTE_V_1TB_SEG, |
| &dummy1, &dummy2); |
| if (lpar_rc == H_NOT_FOUND) { |
| lpar_rc = plpar_pte_read_raw(0, i, &dword0, &dummy1); |
| if (!lpar_rc && ((dword0 & HPTE_V_VRMA_MASK) |
| != HPTE_V_VRMA_MASK)) |
| /* Can be hpte for 1TB Seg. So remove it */ |
| plpar_pte_remove_raw(0, i, 0, &dummy1, &dummy2); |
| } |
| } |
| } |
| |
| /* |
| * This computes the AVPN and B fields of the first dword of a HPTE, |
| * for use when we want to match an existing PTE. The bottom 7 bits |
| * of the returned value are zero. |
| */ |
| static inline unsigned long hpte_encode_avpn(unsigned long va, int psize, |
| int ssize) |
| { |
| unsigned long v; |
| |
| v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm); |
| v <<= HPTE_V_AVPN_SHIFT; |
| v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT; |
| return v; |
| } |
| |
| /* |
| * NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and |
| * the low 3 bits of flags happen to line up. So no transform is needed. |
| * We can probably optimize here and assume the high bits of newpp are |
| * already zero. For now I am paranoid. |
| */ |
| static long pSeries_lpar_hpte_updatepp(unsigned long slot, |
| unsigned long newpp, |
| unsigned long va, |
| int psize, int ssize, int local) |
| { |
| unsigned long lpar_rc; |
| unsigned long flags = (newpp & 7) | H_AVPN; |
| unsigned long want_v; |
| |
| want_v = hpte_encode_avpn(va, psize, ssize); |
| |
| pr_debug(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...", |
| want_v, slot, flags, psize); |
| |
| lpar_rc = plpar_pte_protect(flags, slot, want_v); |
| |
| if (lpar_rc == H_NOT_FOUND) { |
| pr_debug("not found !\n"); |
| return -1; |
| } |
| |
| pr_debug("ok\n"); |
| |
| BUG_ON(lpar_rc != H_SUCCESS); |
| |
| return 0; |
| } |
| |
| static unsigned long pSeries_lpar_hpte_getword0(unsigned long slot) |
| { |
| unsigned long dword0; |
| unsigned long lpar_rc; |
| unsigned long dummy_word1; |
| unsigned long flags; |
| |
| /* Read 1 pte at a time */ |
| /* Do not need RPN to logical page translation */ |
| /* No cross CEC PFT access */ |
| flags = 0; |
| |
| lpar_rc = plpar_pte_read(flags, slot, &dword0, &dummy_word1); |
| |
| BUG_ON(lpar_rc != H_SUCCESS); |
| |
| return dword0; |
| } |
| |
| static long pSeries_lpar_hpte_find(unsigned long va, int psize, int ssize) |
| { |
| unsigned long hash; |
| unsigned long i; |
| long slot; |
| unsigned long want_v, hpte_v; |
| |
| hash = hpt_hash(va, mmu_psize_defs[psize].shift, ssize); |
| want_v = hpte_encode_avpn(va, psize, ssize); |
| |
| /* Bolted entries are always in the primary group */ |
| slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; |
| for (i = 0; i < HPTES_PER_GROUP; i++) { |
| hpte_v = pSeries_lpar_hpte_getword0(slot); |
| |
| if (HPTE_V_COMPARE(hpte_v, want_v) && (hpte_v & HPTE_V_VALID)) |
| /* HPTE matches */ |
| return slot; |
| ++slot; |
| } |
| |
| return -1; |
| } |
| |
| static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp, |
| unsigned long ea, |
| int psize, int ssize) |
| { |
| unsigned long lpar_rc, slot, vsid, va, flags; |
| |
| vsid = get_kernel_vsid(ea, ssize); |
| va = hpt_va(ea, vsid, ssize); |
| |
| slot = pSeries_lpar_hpte_find(va, psize, ssize); |
| BUG_ON(slot == -1); |
| |
| flags = newpp & 7; |
| lpar_rc = plpar_pte_protect(flags, slot, 0); |
| |
| BUG_ON(lpar_rc != H_SUCCESS); |
| } |
| |
| static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, |
| int psize, int ssize, int local) |
| { |
| unsigned long want_v; |
| unsigned long lpar_rc; |
| unsigned long dummy1, dummy2; |
| |
| pr_debug(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n", |
| slot, va, psize, local); |
| |
| want_v = hpte_encode_avpn(va, psize, ssize); |
| lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v, &dummy1, &dummy2); |
| if (lpar_rc == H_NOT_FOUND) |
| return; |
| |
| BUG_ON(lpar_rc != H_SUCCESS); |
| } |
| |
| static void pSeries_lpar_hpte_removebolted(unsigned long ea, |
| int psize, int ssize) |
| { |
| unsigned long slot, vsid, va; |
| |
| vsid = get_kernel_vsid(ea, ssize); |
| va = hpt_va(ea, vsid, ssize); |
| |
| slot = pSeries_lpar_hpte_find(va, psize, ssize); |
| BUG_ON(slot == -1); |
| |
| pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0); |
| } |
| |
| /* Flag bits for H_BULK_REMOVE */ |
| #define HBR_REQUEST 0x4000000000000000UL |
| #define HBR_RESPONSE 0x8000000000000000UL |
| #define HBR_END 0xc000000000000000UL |
| #define HBR_AVPN 0x0200000000000000UL |
| #define HBR_ANDCOND 0x0100000000000000UL |
| |
| /* |
| * Take a spinlock around flushes to avoid bouncing the hypervisor tlbie |
| * lock. |
| */ |
| static void pSeries_lpar_flush_hash_range(unsigned long number, int local) |
| { |
| unsigned long i, pix, rc; |
| unsigned long flags = 0; |
| struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); |
| int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); |
| unsigned long param[9]; |
| unsigned long va; |
| unsigned long hash, index, shift, hidx, slot; |
| real_pte_t pte; |
| int psize, ssize; |
| |
| if (lock_tlbie) |
| spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags); |
| |
| psize = batch->psize; |
| ssize = batch->ssize; |
| pix = 0; |
| for (i = 0; i < number; i++) { |
| va = batch->vaddr[i]; |
| pte = batch->pte[i]; |
| pte_iterate_hashed_subpages(pte, psize, va, index, shift) { |
| hash = hpt_hash(va, shift, ssize); |
| hidx = __rpte_to_hidx(pte, index); |
| if (hidx & _PTEIDX_SECONDARY) |
| hash = ~hash; |
| slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; |
| slot += hidx & _PTEIDX_GROUP_IX; |
| if (!firmware_has_feature(FW_FEATURE_BULK_REMOVE)) { |
| pSeries_lpar_hpte_invalidate(slot, va, psize, |
| ssize, local); |
| } else { |
| param[pix] = HBR_REQUEST | HBR_AVPN | slot; |
| param[pix+1] = hpte_encode_avpn(va, psize, |
| ssize); |
| pix += 2; |
| if (pix == 8) { |
| rc = plpar_hcall9(H_BULK_REMOVE, param, |
| param[0], param[1], param[2], |
| param[3], param[4], param[5], |
| param[6], param[7]); |
| BUG_ON(rc != H_SUCCESS); |
| pix = 0; |
| } |
| } |
| } pte_iterate_hashed_end(); |
| } |
| if (pix) { |
| param[pix] = HBR_END; |
| rc = plpar_hcall9(H_BULK_REMOVE, param, param[0], param[1], |
| param[2], param[3], param[4], param[5], |
| param[6], param[7]); |
| BUG_ON(rc != H_SUCCESS); |
| } |
| |
| if (lock_tlbie) |
| spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags); |
| } |
| |
| void __init hpte_init_lpar(void) |
| { |
| ppc_md.hpte_invalidate = pSeries_lpar_hpte_invalidate; |
| ppc_md.hpte_updatepp = pSeries_lpar_hpte_updatepp; |
| ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp; |
| ppc_md.hpte_insert = pSeries_lpar_hpte_insert; |
| ppc_md.hpte_remove = pSeries_lpar_hpte_remove; |
| ppc_md.hpte_removebolted = pSeries_lpar_hpte_removebolted; |
| ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range; |
| ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear; |
| } |