| /* |
| * Copyright (C) 2007-2009 Luca Tettamanti <kronos.it@gmail.com> |
| * |
| * This file is released under the GPLv2 |
| * See COPYING in the top level directory of the kernel tree. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/hwmon.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| |
| #include <acpi/acpi.h> |
| #include <acpi/acpixf.h> |
| #include <acpi/acpi_drivers.h> |
| #include <acpi/acpi_bus.h> |
| |
| |
| #define ATK_HID "ATK0110" |
| |
| /* Minimum time between readings, enforced in order to avoid |
| * hogging the CPU. |
| */ |
| #define CACHE_TIME HZ |
| |
| #define BOARD_ID "MBIF" |
| #define METHOD_ENUMERATE "GGRP" |
| #define METHOD_READ "GITM" |
| #define METHOD_WRITE "SITM" |
| #define METHOD_OLD_READ_TMP "RTMP" |
| #define METHOD_OLD_READ_VLT "RVLT" |
| #define METHOD_OLD_READ_FAN "RFAN" |
| #define METHOD_OLD_ENUM_TMP "TSIF" |
| #define METHOD_OLD_ENUM_VLT "VSIF" |
| #define METHOD_OLD_ENUM_FAN "FSIF" |
| |
| #define ATK_MUX_HWMON 0x00000006ULL |
| |
| #define ATK_CLASS_MASK 0xff000000ULL |
| #define ATK_CLASS_FREQ_CTL 0x03000000ULL |
| #define ATK_CLASS_FAN_CTL 0x04000000ULL |
| #define ATK_CLASS_HWMON 0x06000000ULL |
| |
| #define ATK_TYPE_MASK 0x00ff0000ULL |
| #define HWMON_TYPE_VOLT 0x00020000ULL |
| #define HWMON_TYPE_TEMP 0x00030000ULL |
| #define HWMON_TYPE_FAN 0x00040000ULL |
| |
| #define HWMON_SENSOR_ID_MASK 0x0000ffffULL |
| |
| enum atk_pack_member { |
| HWMON_PACK_FLAGS, |
| HWMON_PACK_NAME, |
| HWMON_PACK_LIMIT1, |
| HWMON_PACK_LIMIT2, |
| HWMON_PACK_ENABLE |
| }; |
| |
| /* New package format */ |
| #define _HWMON_NEW_PACK_SIZE 7 |
| #define _HWMON_NEW_PACK_FLAGS 0 |
| #define _HWMON_NEW_PACK_NAME 1 |
| #define _HWMON_NEW_PACK_UNK1 2 |
| #define _HWMON_NEW_PACK_UNK2 3 |
| #define _HWMON_NEW_PACK_LIMIT1 4 |
| #define _HWMON_NEW_PACK_LIMIT2 5 |
| #define _HWMON_NEW_PACK_ENABLE 6 |
| |
| /* Old package format */ |
| #define _HWMON_OLD_PACK_SIZE 5 |
| #define _HWMON_OLD_PACK_FLAGS 0 |
| #define _HWMON_OLD_PACK_NAME 1 |
| #define _HWMON_OLD_PACK_LIMIT1 2 |
| #define _HWMON_OLD_PACK_LIMIT2 3 |
| #define _HWMON_OLD_PACK_ENABLE 4 |
| |
| |
| struct atk_data { |
| struct device *hwmon_dev; |
| acpi_handle atk_handle; |
| struct acpi_device *acpi_dev; |
| |
| bool old_interface; |
| |
| /* old interface */ |
| acpi_handle rtmp_handle; |
| acpi_handle rvlt_handle; |
| acpi_handle rfan_handle; |
| /* new inteface */ |
| acpi_handle enumerate_handle; |
| acpi_handle read_handle; |
| |
| int voltage_count; |
| int temperature_count; |
| int fan_count; |
| struct list_head sensor_list; |
| }; |
| |
| |
| typedef ssize_t (*sysfs_show_func)(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| |
| static const struct acpi_device_id atk_ids[] = { |
| {ATK_HID, 0}, |
| {"", 0}, |
| }; |
| MODULE_DEVICE_TABLE(acpi, atk_ids); |
| |
| #define ATTR_NAME_SIZE 16 /* Worst case is "tempN_input" */ |
| |
| struct atk_sensor_data { |
| struct list_head list; |
| struct atk_data *data; |
| struct device_attribute label_attr; |
| struct device_attribute input_attr; |
| struct device_attribute limit1_attr; |
| struct device_attribute limit2_attr; |
| char label_attr_name[ATTR_NAME_SIZE]; |
| char input_attr_name[ATTR_NAME_SIZE]; |
| char limit1_attr_name[ATTR_NAME_SIZE]; |
| char limit2_attr_name[ATTR_NAME_SIZE]; |
| u64 id; |
| u64 type; |
| u64 limit1; |
| u64 limit2; |
| u64 cached_value; |
| unsigned long last_updated; /* in jiffies */ |
| bool is_valid; |
| char const *acpi_name; |
| }; |
| |
| struct atk_acpi_buffer_u64 { |
| union acpi_object buf; |
| u64 value; |
| }; |
| |
| static int atk_add(struct acpi_device *device); |
| static int atk_remove(struct acpi_device *device, int type); |
| static void atk_print_sensor(struct atk_data *data, union acpi_object *obj); |
| static int atk_read_value(struct atk_sensor_data *sensor, u64 *value); |
| static void atk_free_sensors(struct atk_data *data); |
| |
| static struct acpi_driver atk_driver = { |
| .name = ATK_HID, |
| .class = "hwmon", |
| .ids = atk_ids, |
| .ops = { |
| .add = atk_add, |
| .remove = atk_remove, |
| }, |
| }; |
| |
| #define input_to_atk_sensor(attr) \ |
| container_of(attr, struct atk_sensor_data, input_attr) |
| |
| #define label_to_atk_sensor(attr) \ |
| container_of(attr, struct atk_sensor_data, label_attr) |
| |
| #define limit1_to_atk_sensor(attr) \ |
| container_of(attr, struct atk_sensor_data, limit1_attr) |
| |
| #define limit2_to_atk_sensor(attr) \ |
| container_of(attr, struct atk_sensor_data, limit2_attr) |
| |
| static ssize_t atk_input_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct atk_sensor_data *s = input_to_atk_sensor(attr); |
| u64 value; |
| int err; |
| |
| err = atk_read_value(s, &value); |
| if (err) |
| return err; |
| |
| if (s->type == HWMON_TYPE_TEMP) |
| /* ACPI returns decidegree */ |
| value *= 100; |
| |
| return sprintf(buf, "%llu\n", value); |
| } |
| |
| static ssize_t atk_label_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct atk_sensor_data *s = label_to_atk_sensor(attr); |
| |
| return sprintf(buf, "%s\n", s->acpi_name); |
| } |
| |
| static ssize_t atk_limit1_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct atk_sensor_data *s = limit1_to_atk_sensor(attr); |
| u64 value = s->limit1; |
| |
| if (s->type == HWMON_TYPE_TEMP) |
| value *= 100; |
| |
| return sprintf(buf, "%lld\n", value); |
| } |
| |
| static ssize_t atk_limit2_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct atk_sensor_data *s = limit2_to_atk_sensor(attr); |
| u64 value = s->limit2; |
| |
| if (s->type == HWMON_TYPE_TEMP) |
| value *= 100; |
| |
| return sprintf(buf, "%lld\n", value); |
| } |
| |
| static ssize_t atk_name_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "atk0110\n"); |
| } |
| static struct device_attribute atk_name_attr = |
| __ATTR(name, 0444, atk_name_show, NULL); |
| |
| static void atk_init_attribute(struct device_attribute *attr, char *name, |
| sysfs_show_func show) |
| { |
| attr->attr.name = name; |
| attr->attr.mode = 0444; |
| attr->show = show; |
| attr->store = NULL; |
| } |
| |
| |
| static union acpi_object *atk_get_pack_member(struct atk_data *data, |
| union acpi_object *pack, |
| enum atk_pack_member m) |
| { |
| bool old_if = data->old_interface; |
| int offset; |
| |
| switch (m) { |
| case HWMON_PACK_FLAGS: |
| offset = old_if ? _HWMON_OLD_PACK_FLAGS : _HWMON_NEW_PACK_FLAGS; |
| break; |
| case HWMON_PACK_NAME: |
| offset = old_if ? _HWMON_OLD_PACK_NAME : _HWMON_NEW_PACK_NAME; |
| break; |
| case HWMON_PACK_LIMIT1: |
| offset = old_if ? _HWMON_OLD_PACK_LIMIT1 : |
| _HWMON_NEW_PACK_LIMIT1; |
| break; |
| case HWMON_PACK_LIMIT2: |
| offset = old_if ? _HWMON_OLD_PACK_LIMIT2 : |
| _HWMON_NEW_PACK_LIMIT2; |
| break; |
| case HWMON_PACK_ENABLE: |
| offset = old_if ? _HWMON_OLD_PACK_ENABLE : |
| _HWMON_NEW_PACK_ENABLE; |
| break; |
| default: |
| return NULL; |
| } |
| |
| return &pack->package.elements[offset]; |
| } |
| |
| |
| /* New package format is: |
| * - flag (int) |
| * class - used for de-muxing the request to the correct GITn |
| * type (volt, temp, fan) |
| * sensor id | |
| * sensor id - used for de-muxing the request _inside_ the GITn |
| * - name (str) |
| * - unknown (int) |
| * - unknown (int) |
| * - limit1 (int) |
| * - limit2 (int) |
| * - enable (int) |
| * |
| * The old package has the same format but it's missing the two unknown fields. |
| */ |
| static int validate_hwmon_pack(struct atk_data *data, union acpi_object *obj) |
| { |
| struct device *dev = &data->acpi_dev->dev; |
| union acpi_object *tmp; |
| bool old_if = data->old_interface; |
| int const expected_size = old_if ? _HWMON_OLD_PACK_SIZE : |
| _HWMON_NEW_PACK_SIZE; |
| |
| if (obj->type != ACPI_TYPE_PACKAGE) { |
| dev_warn(dev, "Invalid type: %d\n", obj->type); |
| return -EINVAL; |
| } |
| |
| if (obj->package.count != expected_size) { |
| dev_warn(dev, "Invalid package size: %d, expected: %d\n", |
| obj->package.count, expected_size); |
| return -EINVAL; |
| } |
| |
| tmp = atk_get_pack_member(data, obj, HWMON_PACK_FLAGS); |
| if (tmp->type != ACPI_TYPE_INTEGER) { |
| dev_warn(dev, "Invalid type (flag): %d\n", tmp->type); |
| return -EINVAL; |
| } |
| |
| tmp = atk_get_pack_member(data, obj, HWMON_PACK_NAME); |
| if (tmp->type != ACPI_TYPE_STRING) { |
| dev_warn(dev, "Invalid type (name): %d\n", tmp->type); |
| return -EINVAL; |
| } |
| |
| /* Don't check... we don't know what they're useful for anyway */ |
| #if 0 |
| tmp = &obj->package.elements[HWMON_PACK_UNK1]; |
| if (tmp->type != ACPI_TYPE_INTEGER) { |
| dev_warn(dev, "Invalid type (unk1): %d\n", tmp->type); |
| return -EINVAL; |
| } |
| |
| tmp = &obj->package.elements[HWMON_PACK_UNK2]; |
| if (tmp->type != ACPI_TYPE_INTEGER) { |
| dev_warn(dev, "Invalid type (unk2): %d\n", tmp->type); |
| return -EINVAL; |
| } |
| #endif |
| |
| tmp = atk_get_pack_member(data, obj, HWMON_PACK_LIMIT1); |
| if (tmp->type != ACPI_TYPE_INTEGER) { |
| dev_warn(dev, "Invalid type (limit1): %d\n", tmp->type); |
| return -EINVAL; |
| } |
| |
| tmp = atk_get_pack_member(data, obj, HWMON_PACK_LIMIT2); |
| if (tmp->type != ACPI_TYPE_INTEGER) { |
| dev_warn(dev, "Invalid type (limit2): %d\n", tmp->type); |
| return -EINVAL; |
| } |
| |
| tmp = atk_get_pack_member(data, obj, HWMON_PACK_ENABLE); |
| if (tmp->type != ACPI_TYPE_INTEGER) { |
| dev_warn(dev, "Invalid type (enable): %d\n", tmp->type); |
| return -EINVAL; |
| } |
| |
| atk_print_sensor(data, obj); |
| |
| return 0; |
| } |
| |
| #ifdef DEBUG |
| static char const *atk_sensor_type(union acpi_object *flags) |
| { |
| u64 type = flags->integer.value & ATK_TYPE_MASK; |
| char const *what; |
| |
| switch (type) { |
| case HWMON_TYPE_VOLT: |
| what = "voltage"; |
| break; |
| case HWMON_TYPE_TEMP: |
| what = "temperature"; |
| break; |
| case HWMON_TYPE_FAN: |
| what = "fan"; |
| break; |
| default: |
| what = "unknown"; |
| break; |
| } |
| |
| return what; |
| } |
| #endif |
| |
| static void atk_print_sensor(struct atk_data *data, union acpi_object *obj) |
| { |
| #ifdef DEBUG |
| struct device *dev = &data->acpi_dev->dev; |
| union acpi_object *flags; |
| union acpi_object *name; |
| union acpi_object *limit1; |
| union acpi_object *limit2; |
| union acpi_object *enable; |
| char const *what; |
| |
| flags = atk_get_pack_member(data, obj, HWMON_PACK_FLAGS); |
| name = atk_get_pack_member(data, obj, HWMON_PACK_NAME); |
| limit1 = atk_get_pack_member(data, obj, HWMON_PACK_LIMIT1); |
| limit2 = atk_get_pack_member(data, obj, HWMON_PACK_LIMIT2); |
| enable = atk_get_pack_member(data, obj, HWMON_PACK_ENABLE); |
| |
| what = atk_sensor_type(flags); |
| |
| dev_dbg(dev, "%s: %#llx %s [%llu-%llu] %s\n", what, |
| flags->integer.value, |
| name->string.pointer, |
| limit1->integer.value, limit2->integer.value, |
| enable->integer.value ? "enabled" : "disabled"); |
| #endif |
| } |
| |
| static int atk_read_value_old(struct atk_sensor_data *sensor, u64 *value) |
| { |
| struct atk_data *data = sensor->data; |
| struct device *dev = &data->acpi_dev->dev; |
| struct acpi_object_list params; |
| union acpi_object id; |
| acpi_status status; |
| acpi_handle method; |
| |
| switch (sensor->type) { |
| case HWMON_TYPE_VOLT: |
| method = data->rvlt_handle; |
| break; |
| case HWMON_TYPE_TEMP: |
| method = data->rtmp_handle; |
| break; |
| case HWMON_TYPE_FAN: |
| method = data->rfan_handle; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| id.type = ACPI_TYPE_INTEGER; |
| id.integer.value = sensor->id; |
| |
| params.count = 1; |
| params.pointer = &id; |
| |
| status = acpi_evaluate_integer(method, NULL, ¶ms, value); |
| if (status != AE_OK) { |
| dev_warn(dev, "%s: ACPI exception: %s\n", __func__, |
| acpi_format_exception(status)); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value) |
| { |
| struct atk_data *data = sensor->data; |
| struct device *dev = &data->acpi_dev->dev; |
| struct acpi_object_list params; |
| struct acpi_buffer ret; |
| union acpi_object id; |
| struct atk_acpi_buffer_u64 tmp; |
| acpi_status status; |
| |
| id.type = ACPI_TYPE_INTEGER; |
| id.integer.value = sensor->id; |
| |
| params.count = 1; |
| params.pointer = &id; |
| |
| tmp.buf.type = ACPI_TYPE_BUFFER; |
| tmp.buf.buffer.pointer = (u8 *)&tmp.value; |
| tmp.buf.buffer.length = sizeof(u64); |
| ret.length = sizeof(tmp); |
| ret.pointer = &tmp; |
| |
| status = acpi_evaluate_object_typed(data->read_handle, NULL, ¶ms, |
| &ret, ACPI_TYPE_BUFFER); |
| if (status != AE_OK) { |
| dev_warn(dev, "%s: ACPI exception: %s\n", __func__, |
| acpi_format_exception(status)); |
| return -EIO; |
| } |
| |
| /* Return buffer format: |
| * [0-3] "value" is valid flag |
| * [4-7] value |
| */ |
| if (!(tmp.value & 0xffffffff)) { |
| /* The reading is not valid, possible causes: |
| * - sensor failure |
| * - enumeration was FUBAR (and we didn't notice) |
| */ |
| dev_info(dev, "Failure: %#llx\n", tmp.value); |
| return -EIO; |
| } |
| |
| *value = (tmp.value & 0xffffffff00000000ULL) >> 32; |
| |
| return 0; |
| } |
| |
| static int atk_read_value(struct atk_sensor_data *sensor, u64 *value) |
| { |
| int err; |
| |
| if (!sensor->is_valid || |
| time_after(jiffies, sensor->last_updated + CACHE_TIME)) { |
| if (sensor->data->old_interface) |
| err = atk_read_value_old(sensor, value); |
| else |
| err = atk_read_value_new(sensor, value); |
| |
| sensor->is_valid = true; |
| sensor->last_updated = jiffies; |
| sensor->cached_value = *value; |
| } else { |
| *value = sensor->cached_value; |
| err = 0; |
| } |
| |
| return err; |
| } |
| |
| static int atk_add_sensor(struct atk_data *data, union acpi_object *obj) |
| { |
| struct device *dev = &data->acpi_dev->dev; |
| union acpi_object *flags; |
| union acpi_object *name; |
| union acpi_object *limit1; |
| union acpi_object *limit2; |
| union acpi_object *enable; |
| struct atk_sensor_data *sensor; |
| char const *base_name; |
| char const *limit1_name; |
| char const *limit2_name; |
| u64 type; |
| int err; |
| int *num; |
| int start; |
| |
| if (obj->type != ACPI_TYPE_PACKAGE) { |
| /* wft is this? */ |
| dev_warn(dev, "Unknown type for ACPI object: (%d)\n", |
| obj->type); |
| return -EINVAL; |
| } |
| |
| err = validate_hwmon_pack(data, obj); |
| if (err) |
| return err; |
| |
| /* Ok, we have a valid hwmon package */ |
| type = atk_get_pack_member(data, obj, HWMON_PACK_FLAGS)->integer.value |
| & ATK_TYPE_MASK; |
| |
| switch (type) { |
| case HWMON_TYPE_VOLT: |
| base_name = "in"; |
| limit1_name = "min"; |
| limit2_name = "max"; |
| num = &data->voltage_count; |
| start = 0; |
| break; |
| case HWMON_TYPE_TEMP: |
| base_name = "temp"; |
| limit1_name = "max"; |
| limit2_name = "crit"; |
| num = &data->temperature_count; |
| start = 1; |
| break; |
| case HWMON_TYPE_FAN: |
| base_name = "fan"; |
| limit1_name = "min"; |
| limit2_name = "max"; |
| num = &data->fan_count; |
| start = 1; |
| break; |
| default: |
| dev_warn(dev, "Unknown sensor type: %#llx\n", type); |
| return -EINVAL; |
| } |
| |
| enable = atk_get_pack_member(data, obj, HWMON_PACK_ENABLE); |
| if (!enable->integer.value) |
| /* sensor is disabled */ |
| return 0; |
| |
| flags = atk_get_pack_member(data, obj, HWMON_PACK_FLAGS); |
| name = atk_get_pack_member(data, obj, HWMON_PACK_NAME); |
| limit1 = atk_get_pack_member(data, obj, HWMON_PACK_LIMIT1); |
| limit2 = atk_get_pack_member(data, obj, HWMON_PACK_LIMIT2); |
| |
| sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); |
| if (!sensor) |
| return -ENOMEM; |
| |
| sensor->acpi_name = kstrdup(name->string.pointer, GFP_KERNEL); |
| if (!sensor->acpi_name) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| INIT_LIST_HEAD(&sensor->list); |
| sensor->type = type; |
| sensor->data = data; |
| sensor->id = flags->integer.value; |
| sensor->limit1 = limit1->integer.value; |
| sensor->limit2 = limit2->integer.value; |
| |
| snprintf(sensor->input_attr_name, ATTR_NAME_SIZE, |
| "%s%d_input", base_name, start + *num); |
| atk_init_attribute(&sensor->input_attr, |
| sensor->input_attr_name, |
| atk_input_show); |
| |
| snprintf(sensor->label_attr_name, ATTR_NAME_SIZE, |
| "%s%d_label", base_name, start + *num); |
| atk_init_attribute(&sensor->label_attr, |
| sensor->label_attr_name, |
| atk_label_show); |
| |
| snprintf(sensor->limit1_attr_name, ATTR_NAME_SIZE, |
| "%s%d_%s", base_name, start + *num, limit1_name); |
| atk_init_attribute(&sensor->limit1_attr, |
| sensor->limit1_attr_name, |
| atk_limit1_show); |
| |
| snprintf(sensor->limit2_attr_name, ATTR_NAME_SIZE, |
| "%s%d_%s", base_name, start + *num, limit2_name); |
| atk_init_attribute(&sensor->limit2_attr, |
| sensor->limit2_attr_name, |
| atk_limit2_show); |
| |
| list_add(&sensor->list, &data->sensor_list); |
| (*num)++; |
| |
| return 1; |
| out: |
| kfree(sensor->acpi_name); |
| kfree(sensor); |
| return err; |
| } |
| |
| static int atk_enumerate_old_hwmon(struct atk_data *data) |
| { |
| struct device *dev = &data->acpi_dev->dev; |
| struct acpi_buffer buf; |
| union acpi_object *pack; |
| acpi_status status; |
| int i, ret; |
| int count = 0; |
| |
| /* Voltages */ |
| buf.length = ACPI_ALLOCATE_BUFFER; |
| status = acpi_evaluate_object_typed(data->atk_handle, |
| METHOD_OLD_ENUM_VLT, NULL, &buf, ACPI_TYPE_PACKAGE); |
| if (status != AE_OK) { |
| dev_warn(dev, METHOD_OLD_ENUM_VLT ": ACPI exception: %s\n", |
| acpi_format_exception(status)); |
| |
| return -ENODEV; |
| } |
| |
| pack = buf.pointer; |
| for (i = 1; i < pack->package.count; i++) { |
| union acpi_object *obj = &pack->package.elements[i]; |
| |
| ret = atk_add_sensor(data, obj); |
| if (ret > 0) |
| count++; |
| } |
| ACPI_FREE(buf.pointer); |
| |
| /* Temperatures */ |
| buf.length = ACPI_ALLOCATE_BUFFER; |
| status = acpi_evaluate_object_typed(data->atk_handle, |
| METHOD_OLD_ENUM_TMP, NULL, &buf, ACPI_TYPE_PACKAGE); |
| if (status != AE_OK) { |
| dev_warn(dev, METHOD_OLD_ENUM_TMP ": ACPI exception: %s\n", |
| acpi_format_exception(status)); |
| |
| ret = -ENODEV; |
| goto cleanup; |
| } |
| |
| pack = buf.pointer; |
| for (i = 1; i < pack->package.count; i++) { |
| union acpi_object *obj = &pack->package.elements[i]; |
| |
| ret = atk_add_sensor(data, obj); |
| if (ret > 0) |
| count++; |
| } |
| ACPI_FREE(buf.pointer); |
| |
| /* Fans */ |
| buf.length = ACPI_ALLOCATE_BUFFER; |
| status = acpi_evaluate_object_typed(data->atk_handle, |
| METHOD_OLD_ENUM_FAN, NULL, &buf, ACPI_TYPE_PACKAGE); |
| if (status != AE_OK) { |
| dev_warn(dev, METHOD_OLD_ENUM_FAN ": ACPI exception: %s\n", |
| acpi_format_exception(status)); |
| |
| ret = -ENODEV; |
| goto cleanup; |
| } |
| |
| pack = buf.pointer; |
| for (i = 1; i < pack->package.count; i++) { |
| union acpi_object *obj = &pack->package.elements[i]; |
| |
| ret = atk_add_sensor(data, obj); |
| if (ret > 0) |
| count++; |
| } |
| ACPI_FREE(buf.pointer); |
| |
| return count; |
| cleanup: |
| atk_free_sensors(data); |
| return ret; |
| } |
| |
| static int atk_enumerate_new_hwmon(struct atk_data *data) |
| { |
| struct device *dev = &data->acpi_dev->dev; |
| struct acpi_buffer buf; |
| acpi_status ret; |
| struct acpi_object_list params; |
| union acpi_object id; |
| union acpi_object *pack; |
| int err; |
| int i; |
| |
| dev_dbg(dev, "Enumerating hwmon sensors\n"); |
| |
| id.type = ACPI_TYPE_INTEGER; |
| id.integer.value = ATK_MUX_HWMON; |
| params.count = 1; |
| params.pointer = &id; |
| |
| buf.length = ACPI_ALLOCATE_BUFFER; |
| ret = acpi_evaluate_object_typed(data->enumerate_handle, NULL, ¶ms, |
| &buf, ACPI_TYPE_PACKAGE); |
| if (ret != AE_OK) { |
| dev_warn(dev, METHOD_ENUMERATE ": ACPI exception: %s\n", |
| acpi_format_exception(ret)); |
| return -ENODEV; |
| } |
| |
| /* Result must be a package */ |
| pack = buf.pointer; |
| |
| if (pack->package.count < 1) { |
| dev_dbg(dev, "%s: hwmon package is too small: %d\n", __func__, |
| pack->package.count); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| for (i = 0; i < pack->package.count; i++) { |
| union acpi_object *obj = &pack->package.elements[i]; |
| |
| atk_add_sensor(data, obj); |
| } |
| |
| err = data->voltage_count + data->temperature_count + data->fan_count; |
| |
| out: |
| ACPI_FREE(buf.pointer); |
| return err; |
| } |
| |
| static int atk_create_files(struct atk_data *data) |
| { |
| struct atk_sensor_data *s; |
| int err; |
| |
| list_for_each_entry(s, &data->sensor_list, list) { |
| err = device_create_file(data->hwmon_dev, &s->input_attr); |
| if (err) |
| return err; |
| err = device_create_file(data->hwmon_dev, &s->label_attr); |
| if (err) |
| return err; |
| err = device_create_file(data->hwmon_dev, &s->limit1_attr); |
| if (err) |
| return err; |
| err = device_create_file(data->hwmon_dev, &s->limit2_attr); |
| if (err) |
| return err; |
| } |
| |
| err = device_create_file(data->hwmon_dev, &atk_name_attr); |
| |
| return err; |
| } |
| |
| static void atk_remove_files(struct atk_data *data) |
| { |
| struct atk_sensor_data *s; |
| |
| list_for_each_entry(s, &data->sensor_list, list) { |
| device_remove_file(data->hwmon_dev, &s->input_attr); |
| device_remove_file(data->hwmon_dev, &s->label_attr); |
| device_remove_file(data->hwmon_dev, &s->limit1_attr); |
| device_remove_file(data->hwmon_dev, &s->limit2_attr); |
| } |
| device_remove_file(data->hwmon_dev, &atk_name_attr); |
| } |
| |
| static void atk_free_sensors(struct atk_data *data) |
| { |
| struct list_head *head = &data->sensor_list; |
| struct atk_sensor_data *s, *tmp; |
| |
| list_for_each_entry_safe(s, tmp, head, list) { |
| kfree(s->acpi_name); |
| kfree(s); |
| } |
| } |
| |
| static int atk_register_hwmon(struct atk_data *data) |
| { |
| struct device *dev = &data->acpi_dev->dev; |
| int err; |
| |
| dev_dbg(dev, "registering hwmon device\n"); |
| data->hwmon_dev = hwmon_device_register(dev); |
| if (IS_ERR(data->hwmon_dev)) |
| return PTR_ERR(data->hwmon_dev); |
| |
| dev_dbg(dev, "populating sysfs directory\n"); |
| err = atk_create_files(data); |
| if (err) |
| goto remove; |
| |
| return 0; |
| remove: |
| /* Cleanup the registered files */ |
| atk_remove_files(data); |
| hwmon_device_unregister(data->hwmon_dev); |
| return err; |
| } |
| |
| static int atk_check_old_if(struct atk_data *data) |
| { |
| struct device *dev = &data->acpi_dev->dev; |
| acpi_handle ret; |
| acpi_status status; |
| |
| /* RTMP: read temperature */ |
| status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_TMP, &ret); |
| if (status != AE_OK) { |
| dev_dbg(dev, "method " METHOD_OLD_READ_TMP " not found: %s\n", |
| acpi_format_exception(status)); |
| return -ENODEV; |
| } |
| data->rtmp_handle = ret; |
| |
| /* RVLT: read voltage */ |
| status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_VLT, &ret); |
| if (status != AE_OK) { |
| dev_dbg(dev, "method " METHOD_OLD_READ_VLT " not found: %s\n", |
| acpi_format_exception(status)); |
| return -ENODEV; |
| } |
| data->rvlt_handle = ret; |
| |
| /* RFAN: read fan status */ |
| status = acpi_get_handle(data->atk_handle, METHOD_OLD_READ_FAN, &ret); |
| if (status != AE_OK) { |
| dev_dbg(dev, "method " METHOD_OLD_READ_FAN " not found: %s\n", |
| acpi_format_exception(status)); |
| return -ENODEV; |
| } |
| data->rfan_handle = ret; |
| |
| return 0; |
| } |
| |
| static int atk_check_new_if(struct atk_data *data) |
| { |
| struct device *dev = &data->acpi_dev->dev; |
| acpi_handle ret; |
| acpi_status status; |
| |
| /* Enumeration */ |
| status = acpi_get_handle(data->atk_handle, METHOD_ENUMERATE, &ret); |
| if (status != AE_OK) { |
| dev_dbg(dev, "method " METHOD_ENUMERATE " not found: %s\n", |
| acpi_format_exception(status)); |
| return -ENODEV; |
| } |
| data->enumerate_handle = ret; |
| |
| /* De-multiplexer (read) */ |
| status = acpi_get_handle(data->atk_handle, METHOD_READ, &ret); |
| if (status != AE_OK) { |
| dev_dbg(dev, "method " METHOD_READ " not found: %s\n", |
| acpi_format_exception(status)); |
| return -ENODEV; |
| } |
| data->read_handle = ret; |
| |
| return 0; |
| } |
| |
| static int atk_add(struct acpi_device *device) |
| { |
| acpi_status ret; |
| int err; |
| struct acpi_buffer buf; |
| union acpi_object *obj; |
| struct atk_data *data; |
| |
| dev_dbg(&device->dev, "adding...\n"); |
| |
| data = kzalloc(sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->acpi_dev = device; |
| data->atk_handle = device->handle; |
| INIT_LIST_HEAD(&data->sensor_list); |
| |
| buf.length = ACPI_ALLOCATE_BUFFER; |
| ret = acpi_evaluate_object_typed(data->atk_handle, BOARD_ID, NULL, |
| &buf, ACPI_TYPE_PACKAGE); |
| if (ret != AE_OK) { |
| dev_dbg(&device->dev, "atk: method MBIF not found\n"); |
| err = -ENODEV; |
| goto out; |
| } |
| |
| obj = buf.pointer; |
| if (obj->package.count >= 2 && |
| obj->package.elements[1].type == ACPI_TYPE_STRING) { |
| dev_dbg(&device->dev, "board ID = %s\n", |
| obj->package.elements[1].string.pointer); |
| } |
| ACPI_FREE(buf.pointer); |
| |
| /* Check for hwmon methods: first check "old" style methods; note that |
| * both may be present: in this case we stick to the old interface; |
| * analysis of multiple DSDTs indicates that when both interfaces |
| * are present the new one (GGRP/GITM) is not functional. |
| */ |
| err = atk_check_old_if(data); |
| if (!err) { |
| dev_dbg(&device->dev, "Using old hwmon interface\n"); |
| data->old_interface = true; |
| } else { |
| err = atk_check_new_if(data); |
| if (err) |
| goto out; |
| |
| dev_dbg(&device->dev, "Using new hwmon interface\n"); |
| data->old_interface = false; |
| } |
| |
| if (data->old_interface) |
| err = atk_enumerate_old_hwmon(data); |
| else |
| err = atk_enumerate_new_hwmon(data); |
| if (err < 0) |
| goto out; |
| if (err == 0) { |
| dev_info(&device->dev, |
| "No usable sensor detected, bailing out\n"); |
| err = -ENODEV; |
| goto out; |
| } |
| |
| err = atk_register_hwmon(data); |
| if (err) |
| goto cleanup; |
| |
| device->driver_data = data; |
| return 0; |
| cleanup: |
| atk_free_sensors(data); |
| out: |
| kfree(data); |
| return err; |
| } |
| |
| static int atk_remove(struct acpi_device *device, int type) |
| { |
| struct atk_data *data = device->driver_data; |
| dev_dbg(&device->dev, "removing...\n"); |
| |
| device->driver_data = NULL; |
| |
| atk_remove_files(data); |
| atk_free_sensors(data); |
| hwmon_device_unregister(data->hwmon_dev); |
| |
| kfree(data); |
| |
| return 0; |
| } |
| |
| static int __init atk0110_init(void) |
| { |
| int ret; |
| |
| ret = acpi_bus_register_driver(&atk_driver); |
| if (ret) |
| pr_info("atk: acpi_bus_register_driver failed: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static void __exit atk0110_exit(void) |
| { |
| acpi_bus_unregister_driver(&atk_driver); |
| } |
| |
| module_init(atk0110_init); |
| module_exit(atk0110_exit); |
| |
| MODULE_LICENSE("GPL"); |