ARM: mx28: add gpmi-nand support
add gpmi-nand device tree support.
add gpmi-nand pinctrl support.
Also enable the gpmi support for mx28-evk board.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index ee520a5..e53cf67 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -22,6 +22,12 @@
apb@80000000 {
apbh@80000000 {
+ gpmi-nand@8000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+ status = "okay";
+ };
+
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 4634cb8..a89da5a 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -68,15 +68,15 @@
status = "disabled";
};
- bch@8000a000 {
- reg = <0x8000a000 2000>;
- interrupts = <41>;
- status = "disabled";
- };
-
- gpmi@8000c000 {
- reg = <0x8000c000 2000>;
- interrupts = <42 88>;
+ gpmi-nand@8000c000 {
+ compatible = "fsl,imx28-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <88>, <41>;
+ interrupt-names = "gpmi-dma", "bch";
+ fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
@@ -167,6 +167,23 @@
fsl,pull-up = <0>;
};
+ gpmi_pins_a: gpmi-nand@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x0000 0x0010 0x0020
+ 0x0030 0x0040 0x0050 0x0060
+ 0x0070 0x0100 0x0110 0x0140
+ 0x0150 0x0180 0x0190 0x01a0
+ 0x01b0 0x01c0>;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_status_cfg: gpmi-status-cfg {
+ fsl,pinmux-ids = <0x0180 0x0190 0x01c0>;
+ fsl,drive-strength = <2>;
+ };
+
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <0x4000 0x4010 0x4020