[BNX2]: Add ethtool support for remote PHY.
Modify the driver's ethtool_ops->get_settings and set_settings
functions to support remote PHY. Users control the remote copper
PHY settings by specifying link settings for the tp (twisted pair)
port.
The nway_reset function is also modified to support remote PHY.
mii-tool operations are not supported on remote PHY and we will
return -EOPNOTSUPP.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index c571da6..d7fad69 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -5363,17 +5363,25 @@
bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct bnx2 *bp = netdev_priv(dev);
+ int support_serdes = 0, support_copper = 0;
cmd->supported = SUPPORTED_Autoneg;
- if (bp->phy_flags & PHY_SERDES_FLAG) {
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) {
+ support_serdes = 1;
+ support_copper = 1;
+ } else if (bp->phy_port == PORT_FIBRE)
+ support_serdes = 1;
+ else
+ support_copper = 1;
+
+ if (support_serdes) {
cmd->supported |= SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE;
if (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG)
cmd->supported |= SUPPORTED_2500baseX_Full;
- cmd->port = PORT_FIBRE;
}
- else {
+ if (support_copper) {
cmd->supported |= SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
@@ -5381,9 +5389,10 @@
SUPPORTED_1000baseT_Full |
SUPPORTED_TP;
- cmd->port = PORT_TP;
}
+ spin_lock_bh(&bp->phy_lock);
+ cmd->port = bp->phy_port;
cmd->advertising = bp->advertising;
if (bp->autoneg & AUTONEG_SPEED) {
@@ -5401,6 +5410,7 @@
cmd->speed = -1;
cmd->duplex = -1;
}
+ spin_unlock_bh(&bp->phy_lock);
cmd->transceiver = XCVR_INTERNAL;
cmd->phy_address = bp->phy_addr;
@@ -5416,6 +5426,15 @@
u8 req_duplex = bp->req_duplex;
u16 req_line_speed = bp->req_line_speed;
u32 advertising = bp->advertising;
+ int err = -EINVAL;
+
+ spin_lock_bh(&bp->phy_lock);
+
+ if (cmd->port != PORT_TP && cmd->port != PORT_FIBRE)
+ goto err_out_unlock;
+
+ if (cmd->port != bp->phy_port && !(bp->phy_flags & REMOTE_PHY_CAP_FLAG))
+ goto err_out_unlock;
if (cmd->autoneg == AUTONEG_ENABLE) {
autoneg |= AUTONEG_SPEED;
@@ -5428,44 +5447,41 @@
(cmd->advertising == ADVERTISED_100baseT_Half) ||
(cmd->advertising == ADVERTISED_100baseT_Full)) {
- if (bp->phy_flags & PHY_SERDES_FLAG)
- return -EINVAL;
+ if (cmd->port == PORT_FIBRE)
+ goto err_out_unlock;
advertising = cmd->advertising;
} else if (cmd->advertising == ADVERTISED_2500baseX_Full) {
- if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
- return -EINVAL;
- } else if (cmd->advertising == ADVERTISED_1000baseT_Full) {
+ if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) ||
+ (cmd->port == PORT_TP))
+ goto err_out_unlock;
+ } else if (cmd->advertising == ADVERTISED_1000baseT_Full)
advertising = cmd->advertising;
- }
- else if (cmd->advertising == ADVERTISED_1000baseT_Half) {
- return -EINVAL;
- }
+ else if (cmd->advertising == ADVERTISED_1000baseT_Half)
+ goto err_out_unlock;
else {
- if (bp->phy_flags & PHY_SERDES_FLAG) {
+ if (cmd->port == PORT_FIBRE)
advertising = ETHTOOL_ALL_FIBRE_SPEED;
- }
- else {
+ else
advertising = ETHTOOL_ALL_COPPER_SPEED;
- }
}
advertising |= ADVERTISED_Autoneg;
}
else {
- if (bp->phy_flags & PHY_SERDES_FLAG) {
+ if (cmd->port == PORT_FIBRE) {
if ((cmd->speed != SPEED_1000 &&
cmd->speed != SPEED_2500) ||
(cmd->duplex != DUPLEX_FULL))
- return -EINVAL;
+ goto err_out_unlock;
if (cmd->speed == SPEED_2500 &&
!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
- return -EINVAL;
+ goto err_out_unlock;
}
- else if (cmd->speed == SPEED_1000) {
- return -EINVAL;
- }
+ else if (cmd->speed == SPEED_1000 || cmd->speed == SPEED_2500)
+ goto err_out_unlock;
+
autoneg &= ~AUTONEG_SPEED;
req_line_speed = cmd->speed;
req_duplex = cmd->duplex;
@@ -5477,13 +5493,12 @@
bp->req_line_speed = req_line_speed;
bp->req_duplex = req_duplex;
- spin_lock_bh(&bp->phy_lock);
+ err = bnx2_setup_phy(bp, cmd->port);
- bnx2_setup_phy(bp, bp->phy_port);
-
+err_out_unlock:
spin_unlock_bh(&bp->phy_lock);
- return 0;
+ return err;
}
static void
@@ -5610,6 +5625,14 @@
spin_lock_bh(&bp->phy_lock);
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) {
+ int rc;
+
+ rc = bnx2_setup_remote_phy(bp, bp->phy_port);
+ spin_unlock_bh(&bp->phy_lock);
+ return rc;
+ }
+
/* Force a link down visible on the other side */
if (bp->phy_flags & PHY_SERDES_FLAG) {
bnx2_write_phy(bp, bp->mii_bmcr, BMCR_LOOPBACK);
@@ -6219,6 +6242,9 @@
case SIOCGMIIREG: {
u32 mii_regval;
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ return -EOPNOTSUPP;
+
if (!netif_running(dev))
return -EAGAIN;
@@ -6235,6 +6261,9 @@
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ return -EOPNOTSUPP;
+
if (!netif_running(dev))
return -EAGAIN;