Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
acer-wmi, tc1100-wmi: select ACPI_WMI
ACPI: WMI: Improve Kconfig description
ACPI: DMI: add Panasonic CF-52 and Thinpad X61
ACPI: thermal: syntax, spelling, kernel-doc
intel_menlo: build on X86 only
ACPI: build WMI on X86 only
ACPI: cpufreq: Print _PPC changes via cpufreq debug layer
ACPI: add newline to printk
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index 5776e09..ba9c2da 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -14,7 +14,7 @@
and thermal cooling devices (fan, processor...) to register with the thermal management
solution and to be a part of it.
-This how-to focusses on enabling new thermal zone and cooling devices to participate
+This how-to focuses on enabling new thermal zone and cooling devices to participate
in thermal management.
This solution is platform independent and any type of thermal zone devices and
cooling devices should be able to make use of the infrastructure.
@@ -41,9 +41,9 @@
name: the thermal zone name.
trips: the total number of trip points this thermal zone supports.
devdata: device private data
- ops: thermal zone device callbacks.
+ ops: thermal zone device call-backs.
.bind: bind the thermal zone device with a thermal cooling device.
- .unbind: unbing the thermal zone device with a thermal cooling device.
+ .unbind: unbind the thermal zone device with a thermal cooling device.
.get_temp: get the current temperature of the thermal zone.
.get_mode: get the current mode (user/kernel) of the thermal zone.
"kernel" means thermal management is done in kernel.
@@ -69,7 +69,7 @@
It tries to bind itself to all the thermal zone devices register at the same time.
name: the cooling device name.
devdata: device private data.
- ops: thermal cooling devices callbacks.
+ ops: thermal cooling devices call-backs.
.get_max_state: get the Maximum throttle state of the cooling device.
.get_cur_state: get the Current throttle state of the cooling device.
.set_cur_state: set the Current throttle state of the cooling device.
@@ -109,7 +109,6 @@
RW read/write value
All thermal sysfs attributes will be represented under /sys/class/thermal
-/sys/class/thermal/
Thermal zone device sys I/F, created once it's registered:
|thermal_zone[0-*]:
@@ -129,7 +128,7 @@
These two dynamic attributes are created/removed in pairs.
They represent the relationship between a thermal zone and its associated cooling device.
They are created/removed for each
-thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful exection.
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
|thermal_zone[0-*]
|-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone
@@ -147,11 +146,11 @@
Optional
temp Current temperature as reported by thermal zone (sensor)
- Unit: degree celsius
+ Unit: degree Celsius
RO
Required
-mode One of the predifned values in [kernel, user]
+mode One of the predefined values in [kernel, user]
This file gives information about the algorithm
that is currently managing the thermal zone.
It can be either default kernel based algorithm
@@ -164,12 +163,12 @@
charge of the thermal management.
trip_point_[0-*]_temp The temperature above which trip point will be fired
- Unit: degree celsius
+ Unit: degree Celsius
RO
Optional
trip_point_[0-*]_type Strings which indicate the type of the trip point
- Eg. it can be one of critical, hot, passive,
+ E.g. it can be one of critical, hot, passive,
active[0-*] for ACPI thermal zone.
RO
Optional
@@ -179,7 +178,7 @@
RO
Optional
-cdev[0-*]_trip_point The trip point with which cdev[0-*] is assocated in this thermal zone
+cdev[0-*]_trip_point The trip point with which cdev[0-*] is associated in this thermal zone
-1 means the cooling device is not associated with any trip point.
RO
Optional
@@ -211,7 +210,7 @@
ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
-it may register itself as a thermale_zone_device (thermal_zone1) with 4 trip points in all.
+it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all.
It has one processor and one fan, which are both registered as thermal_cooling_device.
If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
the sys I/F structure will be built like this:
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 7ef172c..f688c21 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -204,13 +204,25 @@
config ACPI_WMI
tristate "WMI (EXPERIMENTAL)"
+ depends on X86
depends on EXPERIMENTAL
help
- This driver adds support for the ACPI-WMI mapper device (PNP0C14)
- found on some systems.
+ This driver adds support for the ACPI-WMI (Windows Management
+ Instrumentation) mapper device (PNP0C14) found on some systems.
- NOTE: You will need another driver or userspace application on top of
- this to actually use anything defined in the ACPI-WMI mapper.
+ ACPI-WMI is a proprietary extension to ACPI to expose parts of the
+ ACPI firmware to userspace - this is done through various vendor
+ defined methods and data blocks in a PNP0C14 device, which are then
+ made available for userspace to call.
+
+ The implementation of this in Linux currently only exposes this to
+ other kernel space drivers.
+
+ This driver is a required dependency to build the firmware specific
+ drivers needed on many machines, including Acer and HP laptops.
+
+ It is safe to enable this driver even if your DSDT doesn't define
+ any ACPI-WMI devices.
config ACPI_ASUS
tristate "ASUS/Medion Laptop Extras"
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 6dbaa2d..9ce983e 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -445,6 +445,8 @@
* DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
* _OSI(Linux) is a NOP:
* DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+ * _OSI(Linux) effect unknown
+ * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
*/
{
.callback = dmi_enable_osi_linux,
@@ -464,6 +466,14 @@
},
{
.callback = dmi_unknown_osi_linux,
+ .ident = "Lenovo ThinkPad X61",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
+ },
+ },
+ {
+ .callback = dmi_unknown_osi_linux,
.ident = "Lenovo 3000 V100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
@@ -505,6 +515,16 @@
DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
},
},
+ /* Panasonic */
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Panasonic",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
+ /* Toughbook CF-52 */
+ DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"),
+ },
+ },
/*
* Disable OSI(Linux) warnings on all "Samsung Electronics"
*
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 27ccd68..a14501c 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -343,7 +343,7 @@
struct kstat stat;
char *ramfs_dsdt_name = "/DSDT.aml";
- printk(KERN_INFO PREFIX "Checking initramfs for custom DSDT");
+ printk(KERN_INFO PREFIX "Checking initramfs for custom DSDT\n");
/*
* Never do this at home, only the user-space is allowed to open a file.
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index f32010b..b477a4b 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -50,6 +50,10 @@
static DEFINE_MUTEX(performance_mutex);
+/* Use cpufreq debug layer for _PPC changes. */
+#define cpufreq_printk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
+ "cpufreq-core", msg)
+
/*
* _PPC support is implemented as a CPUfreq policy notifier:
* This means each time a CPUfreq driver registered also with
@@ -131,6 +135,9 @@
return -ENODEV;
}
+ cpufreq_printk("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
+ (int)ppc, ppc ? "" : "not");
+
pr->performance_platform_limit = (int)ppc;
return 0;
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 1941587..c143a86 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -106,9 +106,9 @@
depends on X86
depends on EXPERIMENTAL
depends on ACPI
- depends on ACPI_WMI
depends on LEDS_CLASS
depends on BACKLIGHT_CLASS_DEVICE
+ select ACPI_WMI
---help---
This is a driver for newer Acer (and Wistron) laptops. It adds
wireless radio and bluetooth control, and on some laptops,
@@ -155,7 +155,7 @@
tristate "HP Compaq TC1100 Tablet WMI Extras"
depends on X86 && !X86_64
depends on ACPI
- depends on ACPI_WMI
+ select ACPI_WMI
---help---
This is a driver for the WMI extensions (wireless and bluetooth power
control) of the HP Compaq TC1100 tablet.
@@ -288,6 +288,7 @@
config INTEL_MENLOW
tristate "Thermal Management driver for Intel menlow platform"
depends on ACPI_THERMAL
+ depends on X86
---help---
ACPI thermal management enhancement driver on
Intel Menlow platform.
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 9b3f612..69f19f2 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -9,7 +9,7 @@
Generic Thermal Sysfs driver offers a generic mechanism for
thermal management. Usually it's made up of one or more thermal
zone and cooling device.
- each thermal zone contains its own temperature, trip points,
+ Each thermal zone contains its own temperature, trip points,
cooling devices.
All platforms with ACPI thermal support can use this driver.
- If you want this support, you should say Y here
+ If you want this support, you should say Y here.
diff --git a/drivers/thermal/thermal.c b/drivers/thermal/thermal.c
index 3273e34..e782b3e 100644
--- a/drivers/thermal/thermal.c
+++ b/drivers/thermal/thermal.c
@@ -267,7 +267,7 @@
}
static struct device_attribute dev_attr_cdev_type =
- __ATTR(type, 0444, thermal_cooling_device_type_show, NULL);
+__ATTR(type, 0444, thermal_cooling_device_type_show, NULL);
static DEVICE_ATTR(max_state, 0444,
thermal_cooling_device_max_state_show, NULL);
static DEVICE_ATTR(cur_state, 0644,
@@ -276,7 +276,7 @@
static ssize_t
thermal_cooling_device_trip_point_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+ struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device_instance *instance;
@@ -293,11 +293,12 @@
/**
* thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone
- * this function is usually called in the thermal zone device .bind callback.
* @tz: thermal zone device
* @trip: indicates which trip point the cooling devices is
* associated with in this thermal zone.
* @cdev: thermal cooling device
+ *
+ * This function is usually called in the thermal zone device .bind callback.
*/
int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
int trip,
@@ -307,8 +308,7 @@
struct thermal_cooling_device_instance *pos;
int result;
- if (trip >= tz->trips ||
- (trip < 0 && trip != THERMAL_TRIPS_NONE))
+ if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
return -EINVAL;
if (!tz || !cdev)
@@ -361,15 +361,17 @@
kfree(dev);
return result;
}
+
EXPORT_SYMBOL(thermal_zone_bind_cooling_device);
/**
* thermal_zone_unbind_cooling_device - unbind a cooling device from a thermal zone
- * this function is usually called in the thermal zone device .unbind callback.
* @tz: thermal zone device
* @trip: indicates which trip point the cooling devices is
* associated with in this thermal zone.
* @cdev: thermal cooling device
+ *
+ * This function is usually called in the thermal zone device .unbind callback.
*/
int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
int trip,
@@ -379,8 +381,7 @@
mutex_lock(&tz->lock);
list_for_each_entry_safe(pos, next, &tz->cooling_devices, node) {
- if (pos->tz == tz && pos->trip == trip
- && pos->cdev == cdev) {
+ if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
list_del(&pos->node);
mutex_unlock(&tz->lock);
goto unbind;
@@ -397,6 +398,7 @@
kfree(pos);
return 0;
}
+
EXPORT_SYMBOL(thermal_zone_unbind_cooling_device);
static void thermal_release(struct device *dev)
@@ -425,7 +427,10 @@
* @ops: standard thermal cooling devices callbacks.
*/
struct thermal_cooling_device *thermal_cooling_device_register(char *type,
- void *devdata, struct thermal_cooling_device_ops *ops)
+ void *devdata,
+ struct
+ thermal_cooling_device_ops
+ *ops)
{
struct thermal_cooling_device *cdev;
struct thermal_zone_device *pos;
@@ -435,7 +440,7 @@
return NULL;
if (!ops || !ops->get_max_state || !ops->get_cur_state ||
- !ops->set_cur_state)
+ !ops->set_cur_state)
return NULL;
cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL);
@@ -462,8 +467,7 @@
/* sys I/F */
if (type) {
- result = device_create_file(&cdev->device,
- &dev_attr_cdev_type);
+ result = device_create_file(&cdev->device, &dev_attr_cdev_type);
if (result)
goto unregister;
}
@@ -496,11 +500,11 @@
device_unregister(&cdev->device);
return NULL;
}
+
EXPORT_SYMBOL(thermal_cooling_device_register);
/**
* thermal_cooling_device_unregister - removes the registered thermal cooling device
- *
* @cdev: the thermal cooling device to remove.
*
* thermal_cooling_device_unregister() must be called when the device is no
@@ -533,8 +537,7 @@
}
mutex_unlock(&thermal_list_lock);
if (cdev->type[0])
- device_remove_file(&cdev->device,
- &dev_attr_cdev_type);
+ device_remove_file(&cdev->device, &dev_attr_cdev_type);
device_remove_file(&cdev->device, &dev_attr_max_state);
device_remove_file(&cdev->device, &dev_attr_cur_state);
@@ -542,6 +545,7 @@
device_unregister(&cdev->device);
return;
}
+
EXPORT_SYMBOL(thermal_cooling_device_unregister);
/**
@@ -555,8 +559,10 @@
* longer needed.
*/
struct thermal_zone_device *thermal_zone_device_register(char *type,
- int trips, void *devdata,
- struct thermal_zone_device_ops *ops)
+ int trips,
+ void *devdata, struct
+ thermal_zone_device_ops
+ *ops)
{
struct thermal_zone_device *tz;
struct thermal_cooling_device *pos;
@@ -625,9 +631,9 @@
list_add_tail(&tz->node, &thermal_tz_list);
if (ops->bind)
list_for_each_entry(pos, &thermal_cdev_list, node) {
- result = ops->bind(tz, pos);
- if (result)
- break;
+ result = ops->bind(tz, pos);
+ if (result)
+ break;
}
mutex_unlock(&thermal_list_lock);
@@ -639,11 +645,11 @@
device_unregister(&tz->device);
return NULL;
}
+
EXPORT_SYMBOL(thermal_zone_device_register);
/**
* thermal_device_unregister - removes the registered thermal zone device
- *
* @tz: the thermal zone device to remove
*/
void thermal_zone_device_unregister(struct thermal_zone_device *tz)
@@ -685,6 +691,7 @@
device_unregister(&tz->device);
return;
}
+
EXPORT_SYMBOL(thermal_zone_device_unregister);
static int __init thermal_init(void)