Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
acer-wmi, tc1100-wmi: select ACPI_WMI
ACPI: WMI: Improve Kconfig description
ACPI: DMI: add Panasonic CF-52 and Thinpad X61
ACPI: thermal: syntax, spelling, kernel-doc
intel_menlo: build on X86 only
ACPI: build WMI on X86 only
ACPI: cpufreq: Print _PPC changes via cpufreq debug layer
ACPI: add newline to printk
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index d6cb1a8..40121b5 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -168,7 +168,7 @@
char buf[256];
} ans;
- int id, rc;
+ int id = 0, rc;
struct nlattr *na;
int rep_len;
@@ -209,7 +209,7 @@
void task_context_switch_counts(struct taskstats *t)
{
printf("\n\nTask %15s%15s\n"
- " %15lu%15lu\n",
+ " %15llu%15llu\n",
"voluntary", "nonvoluntary",
t->nvcsw, t->nivcsw);
}
@@ -399,7 +399,7 @@
goto done;
}
- PRINTF("nlmsghdr size=%d, nlmsg_len=%d, rep_len=%d\n",
+ PRINTF("nlmsghdr size=%zu, nlmsg_len=%d, rep_len=%d\n",
sizeof(struct nlmsghdr), msg.n.nlmsg_len, rep_len);
diff --git a/Documentation/aoe/mkdevs.sh b/Documentation/aoe/mkdevs.sh
index 97374aa..44c0ab7 100644
--- a/Documentation/aoe/mkdevs.sh
+++ b/Documentation/aoe/mkdevs.sh
@@ -29,6 +29,8 @@
mknod -m 0200 $dir/interfaces c $MAJOR 4
rm -f $dir/revalidate
mknod -m 0200 $dir/revalidate c $MAJOR 5
+rm -f $dir/flush
+mknod -m 0200 $dir/flush c $MAJOR 6
export n_partitions
mkshelf=`echo $0 | sed 's!mkdevs!mkshelf!'`
diff --git a/Documentation/aoe/udev-install.sh b/Documentation/aoe/udev-install.sh
index 6449911..15e86f5 100644
--- a/Documentation/aoe/udev-install.sh
+++ b/Documentation/aoe/udev-install.sh
@@ -23,7 +23,10 @@
# /etc/udev/rules.d
#
rules_d="`sed -n '/^udev_rules=/{ s!udev_rules=!!; s!\"!!g; p; }' $conf`"
-if test -z "$rules_d" || test ! -d "$rules_d"; then
+if test -z "$rules_d" ; then
+ rules_d=/etc/udev/rules.d
+fi
+if test ! -d "$rules_d"; then
echo "$me Error: cannot find udev rules directory" 1>&2
exit 1
fi
diff --git a/Documentation/aoe/udev.txt b/Documentation/aoe/udev.txt
index a7ed1dc..8686e78 100644
--- a/Documentation/aoe/udev.txt
+++ b/Documentation/aoe/udev.txt
@@ -1,6 +1,7 @@
# These rules tell udev what device nodes to create for aoe support.
-# They may be installed along the following lines (adjusted to what
-# you see on your system).
+# They may be installed along the following lines. Check the section
+# 8 udev manpage to see whether your udev supports SUBSYSTEM, and
+# whether it uses one or two equal signs for SUBSYSTEM and KERNEL.
#
# ecashin@makki ~$ su
# Password:
@@ -15,10 +16,11 @@
#
# aoe char devices
-SUBSYSTEM="aoe", KERNEL="discover", NAME="etherd/%k", GROUP="disk", MODE="0220"
-SUBSYSTEM="aoe", KERNEL="err", NAME="etherd/%k", GROUP="disk", MODE="0440"
-SUBSYSTEM="aoe", KERNEL="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
-SUBSYSTEM="aoe", KERNEL="revalidate", NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k", GROUP="disk", MODE="0440"
+SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="revalidate", NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="flush", NAME="etherd/%k", GROUP="disk", MODE="0220"
# aoe block devices
-KERNEL="etherd*", NAME="%k", GROUP="disk"
+KERNEL=="etherd*", NAME="%k", GROUP="disk"
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 17b1659..ce9503c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -99,17 +99,6 @@
---------------------------
-What: a.out interpreter support for ELF executables
-When: 2.6.25
-Files: fs/binfmt_elf.c
-Why: Using a.out interpreters for ELF executables was a feature for
- transition from a.out to ELF. But now it is unlikely to be still
- needed anymore and removing it would simplify the hairy ELF
- loader code.
-Who: Andi Kleen <ak@suse.de>
-
----------------------------
-
What: remove EXPORT_SYMBOL(kernel_thread)
When: August 2006
Files: arch/*/kernel/*_ksyms.c
@@ -192,14 +181,6 @@
---------------------------
-What: 'time' kernel boot parameter
-When: January 2008
-Why: replaced by 'printk.time=<value>' so that printk timestamps can be
- enabled or disabled as needed
-Who: Randy Dunlap <randy.dunlap@oracle.com>
-
----------------------------
-
What: libata spindown skipping and warning
When: Dec 2008
Why: Some halt(8) implementations synchronize caches for and spin
diff --git a/Documentation/filesystems/isofs.txt b/Documentation/filesystems/isofs.txt
index 758e504..6973b98 100644
--- a/Documentation/filesystems/isofs.txt
+++ b/Documentation/filesystems/isofs.txt
@@ -24,6 +24,7 @@
map=normal Map non-Rock Ridge filenames to lower case
map=acorn As map=normal but also apply Acorn extensions if present
mode=xxx Sets the permissions on files to xxx
+ dmode=xxx Sets the permissions on directories to xxx
nojoliet Ignore Joliet extensions if they are present.
norock Ignore Rock Ridge extensions if they are present.
hide Completely strip hidden files from the file system.
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index bd55038..81e5be6 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -151,7 +151,7 @@
const char *dev_name: the device name we are mounting.
void *data: arbitrary mount options, usually comes as an ASCII
- string
+ string (see "Mount Options" section)
struct vfsmount *mnt: a vfs-internal representation of a mount point
@@ -182,7 +182,7 @@
must initialize this properly.
void *data: arbitrary mount options, usually comes as an ASCII
- string
+ string (see "Mount Options" section)
int silent: whether or not to be silent on error
@@ -291,7 +291,8 @@
umount_begin: called when the VFS is unmounting a filesystem.
- show_options: called by the VFS to show mount options for /proc/<pid>/mounts.
+ show_options: called by the VFS to show mount options for
+ /proc/<pid>/mounts. (see "Mount Options" section)
quota_read: called by the VFS to read from filesystem quota file.
@@ -969,6 +970,49 @@
For further information on dentry locking, please refer to the document
Documentation/filesystems/dentry-locking.txt.
+Mount Options
+=============
+
+Parsing options
+---------------
+
+On mount and remount the filesystem is passed a string containing a
+comma separated list of mount options. The options can have either of
+these forms:
+
+ option
+ option=value
+
+The <linux/parser.h> header defines an API that helps parse these
+options. There are plenty of examples on how to use it in existing
+filesystems.
+
+Showing options
+---------------
+
+If a filesystem accepts mount options, it must define show_options()
+to show all the currently active options. The rules are:
+
+ - options MUST be shown which are not default or their values differ
+ from the default
+
+ - options MAY be shown which are enabled by default or have their
+ default value
+
+Options used only internally between a mount helper and the kernel
+(such as file descriptors), or which only have an effect during the
+mounting (such as ones controlling the creation of a journal) are exempt
+from the above rules.
+
+The underlying reason for the above rules is to make sure, that a
+mount can be accurately replicated (e.g. umounting and mounting again)
+based on the information found in /proc/mounts.
+
+A simple method of saving options at mount/remount time and showing
+them is provided with the save_mount_options() and
+generic_show_options() helper functions. Please note, that using
+these may have drawbacks. For more info see header comments for these
+functions in fs/namespace.c.
Resources
=========
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 0dcbd26..a4fc7fc 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1973,9 +1973,6 @@
<deci-seconds>: poll all this frequency
0: no polling (default)
- time Show timing data prefixed to each printk message line
- [deprecated, see 'printk.time']
-
tipar.timeout= [HW,PPT]
Set communications timeout in tenths of a second
(default 15).
diff --git a/Documentation/mn10300/ABI.txt b/Documentation/mn10300/ABI.txt
new file mode 100644
index 0000000..1fef1f0
--- /dev/null
+++ b/Documentation/mn10300/ABI.txt
@@ -0,0 +1,149 @@
+ =========================
+ MN10300 FUNCTION CALL ABI
+ =========================
+
+=======
+GENERAL
+=======
+
+The MN10300/AM33 kernel runs in little-endian mode; big-endian mode is not
+supported.
+
+The stack grows downwards, and should always be 32-bit aligned. There are
+separate stack pointer registers for userspace and the kernel.
+
+
+================
+ARGUMENT PASSING
+================
+
+The first two arguments (assuming up to 32-bits per argument) to a function are
+passed in the D0 and D1 registers respectively; all other arguments are passed
+on the stack.
+
+If 64-bit arguments are being passed, then they are never split between
+registers and the stack. If the first argument is a 64-bit value, it will be
+passed in D0:D1. If the first argument is not a 64-bit value, but the second
+is, the second will be passed entirely on the stack and D1 will be unused.
+
+Arguments smaller than 32-bits are not coelesced within a register or a stack
+word. For example, two byte-sized arguments will always be passed in separate
+registers or word-sized stack slots.
+
+
+=================
+CALLING FUNCTIONS
+=================
+
+The caller must allocate twelve bytes on the stack for the callee's use before
+it inserts a CALL instruction. The CALL instruction will write into the TOS
+word, but won't actually modify the stack pointer; similarly, the RET
+instruction reads from the TOS word of the stack, but doesn't move the stack
+pointer beyond it.
+
+
+ Stack:
+ | |
+ | |
+ |---------------| SP+20
+ | 4th Arg |
+ |---------------| SP+16
+ | 3rd Arg |
+ |---------------| SP+12
+ | D1 Save Slot |
+ |---------------| SP+8
+ | D0 Save Slot |
+ |---------------| SP+4
+ | Return Addr |
+ |---------------| SP
+ | |
+ | |
+
+
+The caller must leave space on the stack (hence an allocation of twelve bytes)
+in which the callee may store the first two arguments.
+
+
+============
+RETURN VALUE
+============
+
+The return value is passed in D0 for an integer (or D0:D1 for a 64-bit value),
+or A0 for a pointer.
+
+If the return value is a value larger than 64-bits, or is a structure or an
+array, then a hidden first argument will be passed to the callee by the caller:
+this will point to a piece of memory large enough to hold the result of the
+function. In this case, the callee will return the value in that piece of
+memory, and no value will be returned in D0 or A0.
+
+
+===================
+REGISTER CLOBBERING
+===================
+
+The values in certain registers may be clobbered by the callee, and other
+values must be saved:
+
+ Clobber: D0-D1, A0-A1, E0-E3
+ Save: D2-D3, A2-A3, E4-E7, SP
+
+All other non-supervisor-only registers are clobberable (such as MDR, MCRL,
+MCRH).
+
+
+=================
+SPECIAL REGISTERS
+=================
+
+Certain ordinary registers may carry special usage for the compiler:
+
+ A3: Frame pointer
+ E2: TLS pointer
+
+
+==========
+KERNEL ABI
+==========
+
+The kernel may use a slightly different ABI internally.
+
+ (*) E2
+
+ If CONFIG_MN10300_CURRENT_IN_E2 is defined, then the current task pointer
+ will be kept in the E2 register, and that register will be marked
+ unavailable for the compiler to use as a scratch register.
+
+ Normally the kernel uses something like:
+
+ MOV SP,An
+ AND 0xFFFFE000,An
+ MOV (An),Rm // Rm holds current
+ MOV (yyy,Rm) // Access current->yyy
+
+ To find the address of current; but since this option permits current to
+ be carried globally in an register, it can use:
+
+ MOV (yyy,E2) // Access current->yyy
+
+ instead.
+
+
+===============
+SYSTEM CALL ABI
+===============
+
+System calls are called with the following convention:
+
+ REGISTER ENTRY EXIT
+ =============== ======================= =======================
+ D0 Syscall number Return value
+ A0 1st syscall argument Saved
+ D1 2nd syscall argument Saved
+ A3 3rd syscall argument Saved
+ A2 4th syscall argument Saved
+ D3 5th syscall argument Saved
+ D2 6th syscall argument Saved
+
+All other registers are saved. The layout is a consequence of the way the MOVM
+instruction stores registers onto the stack.
diff --git a/Documentation/mn10300/compartmentalisation.txt b/Documentation/mn10300/compartmentalisation.txt
new file mode 100644
index 0000000..8958b51
--- /dev/null
+++ b/Documentation/mn10300/compartmentalisation.txt
@@ -0,0 +1,60 @@
+ =========================================
+ PART-SPECIFIC SOURCE COMPARTMENTALISATION
+ =========================================
+
+The sources for various parts are compartmentalised at two different levels:
+
+ (1) Processor level
+
+ The "processor level" is a CPU core plus the other on-silicon
+ peripherals.
+
+ Processor-specific header files are divided among directories in a similar
+ way to the CPU level:
+
+ (*) include/asm-mn10300/proc-mn103e010/
+
+ Support for the AM33v2 CPU core.
+
+ The appropriate processor is selected by a CONFIG_MN10300_PROC_YYYY option
+ from the "Processor support" choice menu in the arch/mn10300/Kconfig file.
+
+
+ (2) Unit level
+
+ The "unit level" is a processor plus all the external peripherals
+ controlled by that processor.
+
+ Unit-specific header files are divided among directories in a similar way
+ to the CPU level; not only that, but specific sources may also be
+ segregated into separate directories under the arch directory:
+
+ (*) include/asm-mn10300/unit-asb2303/
+ (*) arch/mn10300/unit-asb2303/
+
+ Support for the ASB2303 board with an ASB2308 daughter board.
+
+ (*) include/asm-mn10300/unit-asb2305/
+ (*) arch/mn10300/unit-asb2305/
+
+ Support for the ASB2305 board.
+
+ The appropriate processor is selected by a CONFIG_MN10300_UNIT_ZZZZ option
+ from the "Unit type" choice menu in the arch/mn10300/Kconfig file.
+
+
+============
+COMPILE TIME
+============
+
+When the kernel is compiled, symbolic links will be made in the asm header file
+directory for this arch:
+
+ include/asm-mn10300/proc => include/asm-mn10300/proc-YYYY/
+ include/asm-mn10300/unit => include/asm-mn10300/unit-ZZZZ/
+
+So that the header files contained in those directories can be accessed without
+lots of #ifdef-age.
+
+The appropriate arch/mn10300/unit-ZZZZ directory will also be entered by the
+compilation process; all other unit-specific directories will be ignored.
diff --git a/MAINTAINERS b/MAINTAINERS
index 2cdb591..a24631f4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -688,6 +688,12 @@
W: http://www.at91.com/
S: Maintained
+ATMEL AT91 / AT32 SERIAL DRIVER
+P: Haavard Skinnemoen
+M: hskinnemoen@atmel.com
+L: linux-kernel@vger.kernel.org
+S: Supported
+
ATMEL LCDFB DRIVER
P: Nicolas Ferre
M: nicolas.ferre@atmel.com
@@ -2614,6 +2620,15 @@
W: http://www.linux-mm.org
S: Maintained
+MEI MN10300/AM33 PORT
+P: David Howells
+M: dhowells@redhat.com
+P: Koichi Yasutake
+M: yasutake.koichi@jp.panasonic.com
+L: linux-am33-list@redhat.com
+W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
+S: Maintained
+
MEMORY TECHNOLOGY DEVICES (MTD)
P: David Woodhouse
M: dwmw2@infradead.org
@@ -3245,6 +3260,11 @@
S: Maintained
F: drivers/net/wireless/rt2x00/
+RAMDISK RAM BLOCK DEVICE DRIVER
+P: Nick Piggin
+M: npiggin@suse.de
+S: Maintained
+
RANDOM NUMBER DRIVER
P: Matt Mackall
M: mpm@selenic.com
@@ -3881,8 +3901,8 @@
S: Maintained
UDF FILESYSTEM
-P: Ben Fennema
-M: bfennema@falcon.csc.calpoly.edu
+P: Jan Kara
+M: jack@suse.cz
W: http://linux-udf.sourceforge.net
S: Maintained
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 01b10ab..5b7dcd5 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -67,6 +67,9 @@
depends on SMP
default y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
source "init/Kconfig"
@@ -612,6 +615,11 @@
Take the default (1) unless you want more control or more info.
+config HZ
+ int
+ default 1200 if ALPHA_RAWHIDE
+ default 1024
+
source "drivers/pci/Kconfig"
source "drivers/eisa/Kconfig"
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 72f9a61..973c5c3 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -22,7 +22,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/utsname.h>
#include <linux/time.h>
#include <linux/timex.h>
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 92b6162..96ed82f 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -19,7 +19,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/utsname.h>
#include <linux/time.h>
#include <linux/major.h>
@@ -318,68 +317,6 @@
}
/*
- * Fill in the user structure for an ECOFF core dump.
- */
-void
-dump_thread(struct pt_regs * pt, struct user * dump)
-{
- /* switch stack follows right below pt_regs: */
- struct switch_stack * sw = ((struct switch_stack *) pt) - 1;
-
- dump->magic = CMAGIC;
- dump->start_code = current->mm->start_code;
- dump->start_data = current->mm->start_data;
- dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
- dump->u_tsize = ((current->mm->end_code - dump->start_code)
- >> PAGE_SHIFT);
- dump->u_dsize = ((current->mm->brk + PAGE_SIZE-1 - dump->start_data)
- >> PAGE_SHIFT);
- dump->u_ssize = (current->mm->start_stack - dump->start_stack
- + PAGE_SIZE-1) >> PAGE_SHIFT;
-
- /*
- * We store the registers in an order/format that is
- * compatible with DEC Unix/OSF/1 as this makes life easier
- * for gdb.
- */
- dump->regs[EF_V0] = pt->r0;
- dump->regs[EF_T0] = pt->r1;
- dump->regs[EF_T1] = pt->r2;
- dump->regs[EF_T2] = pt->r3;
- dump->regs[EF_T3] = pt->r4;
- dump->regs[EF_T4] = pt->r5;
- dump->regs[EF_T5] = pt->r6;
- dump->regs[EF_T6] = pt->r7;
- dump->regs[EF_T7] = pt->r8;
- dump->regs[EF_S0] = sw->r9;
- dump->regs[EF_S1] = sw->r10;
- dump->regs[EF_S2] = sw->r11;
- dump->regs[EF_S3] = sw->r12;
- dump->regs[EF_S4] = sw->r13;
- dump->regs[EF_S5] = sw->r14;
- dump->regs[EF_S6] = sw->r15;
- dump->regs[EF_A3] = pt->r19;
- dump->regs[EF_A4] = pt->r20;
- dump->regs[EF_A5] = pt->r21;
- dump->regs[EF_T8] = pt->r22;
- dump->regs[EF_T9] = pt->r23;
- dump->regs[EF_T10] = pt->r24;
- dump->regs[EF_T11] = pt->r25;
- dump->regs[EF_RA] = pt->r26;
- dump->regs[EF_T12] = pt->r27;
- dump->regs[EF_AT] = pt->r28;
- dump->regs[EF_SP] = rdusp();
- dump->regs[EF_PS] = pt->ps;
- dump->regs[EF_PC] = pt->pc;
- dump->regs[EF_GP] = pt->gp;
- dump->regs[EF_A0] = pt->r16;
- dump->regs[EF_A1] = pt->r17;
- dump->regs[EF_A2] = pt->r18;
- memcpy((char *)dump->regs + EF_SIZE, sw->fp, 32 * 8);
-}
-EXPORT_SYMBOL(dump_thread);
-
-/*
* Fill in the user structure for a ELF core dump.
*/
void
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 74c3466..a449e99 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -18,7 +18,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/screen_info.h>
#include <linux/delay.h>
#include <linux/mc146818rtc.h>
@@ -1472,7 +1471,7 @@
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e19e774..4127af9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -126,6 +126,9 @@
bool
default y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
config ARCH_MAY_HAVE_PC_FDC
bool
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 4f1a031..46bf2ede 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -18,7 +18,6 @@
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/interrupt.h>
@@ -368,35 +367,6 @@
EXPORT_SYMBOL(dump_fpu);
/*
- * fill in the user structure for a core dump..
- */
-void dump_thread(struct pt_regs * regs, struct user * dump)
-{
- struct task_struct *tsk = current;
-
- dump->magic = CMAGIC;
- dump->start_code = tsk->mm->start_code;
- dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
-
- dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
- dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
- dump->u_ssize = 0;
-
- dump->u_debugreg[0] = tsk->thread.debug.bp[0].address;
- dump->u_debugreg[1] = tsk->thread.debug.bp[1].address;
- dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm;
- dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm;
- dump->u_debugreg[4] = tsk->thread.debug.nsaved;
-
- if (dump->start_stack < 0x04000000)
- dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
-
- dump->regs = *regs;
- dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
-}
-EXPORT_SYMBOL(dump_thread);
-
-/*
* Shuffle the argument into the correct register before calling the
* thread function. r1 is the thread argument, r2 is the pointer to
* the thread function, and r3 points to the exit function.
diff --git a/arch/avr32/kernel/ocd.c b/arch/avr32/kernel/ocd.c
index c4f0232..1b0245d 100644
--- a/arch/avr32/kernel/ocd.c
+++ b/arch/avr32/kernel/ocd.c
@@ -90,25 +90,29 @@
static struct dentry *ocd_debugfs_DS;
static struct dentry *ocd_debugfs_count;
-static u64 ocd_DC_get(void *data)
+static int ocd_DC_get(void *data, u64 *val)
{
- return ocd_read(DC);
+ *val = ocd_read(DC);
+ return 0;
}
-static void ocd_DC_set(void *data, u64 val)
+static int ocd_DC_set(void *data, u64 val)
{
ocd_write(DC, val);
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n");
-static u64 ocd_DS_get(void *data)
+static int ocd_DS_get(void *data, u64 *val)
{
- return ocd_read(DS);
+ *val = ocd_read(DS);
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n");
-static u64 ocd_count_get(void *data)
+static int ocd_count_get(void *data, u64 *val)
{
- return ocd_count;
+ *val = ocd_count;
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n");
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 14e61f0..7678fee 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1186,6 +1186,59 @@
#endif
/* --------------------------------------------------------------------
+ * PWM
+ * -------------------------------------------------------------------- */
+static struct resource atmel_pwm0_resource[] __initdata = {
+ PBMEM(0xfff01400),
+ IRQ(24),
+};
+static struct clk atmel_pwm0_mck = {
+ .name = "mck",
+ .parent = &pbb_clk,
+ .mode = pbb_clk_mode,
+ .get_rate = pbb_clk_get_rate,
+ .index = 5,
+};
+
+struct platform_device *__init at32_add_device_pwm(u32 mask)
+{
+ struct platform_device *pdev;
+
+ if (!mask)
+ return NULL;
+
+ pdev = platform_device_alloc("atmel_pwm", 0);
+ if (!pdev)
+ return NULL;
+
+ if (platform_device_add_resources(pdev, atmel_pwm0_resource,
+ ARRAY_SIZE(atmel_pwm0_resource)))
+ goto out_free_pdev;
+
+ if (platform_device_add_data(pdev, &mask, sizeof(mask)))
+ goto out_free_pdev;
+
+ if (mask & (1 << 0))
+ select_peripheral(PA(28), PERIPH_A, 0);
+ if (mask & (1 << 1))
+ select_peripheral(PA(29), PERIPH_A, 0);
+ if (mask & (1 << 2))
+ select_peripheral(PA(21), PERIPH_B, 0);
+ if (mask & (1 << 3))
+ select_peripheral(PA(22), PERIPH_B, 0);
+
+ atmel_pwm0_mck.dev = &pdev->dev;
+
+ platform_device_add(pdev);
+
+ return pdev;
+
+out_free_pdev:
+ platform_device_put(pdev);
+ return NULL;
+}
+
+/* --------------------------------------------------------------------
* SSC
* -------------------------------------------------------------------- */
static struct resource ssc0_resource[] = {
@@ -1646,6 +1699,7 @@
&atmel_usart1_usart,
&atmel_usart2_usart,
&atmel_usart3_usart,
+ &atmel_pwm0_mck,
#if defined(CONFIG_CPU_AT32AP7000)
&macb0_hclk,
&macb0_pclk,
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 023dc80..6b8459c6 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -31,7 +31,6 @@
#include <linux/smp_lock.h>
#include <linux/unistd.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/uaccess.h>
#include <linux/fs.h>
#include <linux/err.h>
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 6e106b3..289ea9d 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -700,7 +700,7 @@
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 27b082a..ff078e6 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -55,6 +55,10 @@
bool
default y
+config HZ
+ int
+ default 100
+
source "init/Kconfig"
menu "General setup"
diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c
index 4da042e..c34fb23 100644
--- a/arch/cris/kernel/setup.c
+++ b/arch/cris/kernel/setup.c
@@ -180,7 +180,7 @@
extern int show_cpuinfo(struct seq_file *m, void *v);
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 96f7d70..9e561ed 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -57,6 +57,10 @@
bool
default y
+config HZ
+ int
+ default 1000
+
mainmenu "Fujitsu FR-V Kernel Configuration"
source "init/Kconfig"
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
index 6c01464..0669e13 100644
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -1113,7 +1113,7 @@
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c
index 1a2e5c8..66f616f 100644
--- a/arch/frv/mm/pgalloc.c
+++ b/arch/frv/mm/pgalloc.c
@@ -28,7 +28,7 @@
return pte;
}
-struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *page;
@@ -37,9 +37,11 @@
#else
page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
#endif
- if (page)
+ if (page) {
clear_highpage(page);
- flush_dcache_page(page);
+ pgtable_page_ctor(page);
+ flush_dcache_page(page);
+ }
return page;
}
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index dc61222..f69e5ea 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -65,6 +65,9 @@
bool
default y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
config NO_IOPORT
def_bool y
@@ -79,6 +82,10 @@
bool
default n
+config HZ
+ int
+ default 100
+
source "init/Kconfig"
source "arch/h8300/Kconfig.cpu"
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index cd37346..b1f25c2 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -236,7 +236,7 @@
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 3ab0427..17fda52 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -49,13 +49,13 @@
#endif
static struct clocksource clocksource_itc = {
- .name = "itc",
- .rating = 350,
- .read = itc_get_cycles,
- .mask = CLOCKSOURCE_MASK(64),
- .mult = 0, /*to be caluclated*/
- .shift = 16,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .name = "itc",
+ .rating = 350,
+ .read = itc_get_cycles,
+ .mask = CLOCKSOURCE_MASK(64),
+ .mult = 0, /*to be calculated*/
+ .shift = 16,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static struct clocksource *itc_clocksource;
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 795180b..d4679ab 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -35,6 +35,13 @@
config NO_DMA
def_bool y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
+config HZ
+ int
+ default 100
+
source "init/Kconfig"
diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c
index f1f5db0..0392112 100644
--- a/arch/m32r/kernel/setup.c
+++ b/arch/m32r/kernel/setup.c
@@ -369,7 +369,7 @@
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index ffabd01..2b0ed89 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -52,6 +52,13 @@
config NO_DMA
def_bool SUN3
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
+config HZ
+ int
+ default 100
+
mainmenu "Linux/68k Kernel Configuration"
source "init/Kconfig"
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index f85b928..5de4e4e 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -23,7 +23,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/reboot.h>
#include <linux/init_task.h>
#include <linux/mqueue.h>
@@ -316,53 +315,6 @@
EXPORT_SYMBOL(dump_fpu);
/*
- * fill in the user structure for a core dump..
- */
-void dump_thread(struct pt_regs * regs, struct user * dump)
-{
- struct switch_stack *sw;
-
-/* changed the size calculations - should hopefully work better. lbt */
- dump->magic = CMAGIC;
- dump->start_code = 0;
- dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
- dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
- dump->u_dsize = ((unsigned long) (current->mm->brk +
- (PAGE_SIZE-1))) >> PAGE_SHIFT;
- dump->u_dsize -= dump->u_tsize;
- dump->u_ssize = 0;
-
- if (dump->start_stack < TASK_SIZE)
- dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
-
- dump->u_ar0 = offsetof(struct user, regs);
- sw = ((struct switch_stack *)regs) - 1;
- dump->regs.d1 = regs->d1;
- dump->regs.d2 = regs->d2;
- dump->regs.d3 = regs->d3;
- dump->regs.d4 = regs->d4;
- dump->regs.d5 = regs->d5;
- dump->regs.d6 = sw->d6;
- dump->regs.d7 = sw->d7;
- dump->regs.a0 = regs->a0;
- dump->regs.a1 = regs->a1;
- dump->regs.a2 = regs->a2;
- dump->regs.a3 = sw->a3;
- dump->regs.a4 = sw->a4;
- dump->regs.a5 = sw->a5;
- dump->regs.a6 = sw->a6;
- dump->regs.d0 = regs->d0;
- dump->regs.orig_d0 = regs->orig_d0;
- dump->regs.stkadj = regs->stkadj;
- dump->regs.sr = regs->sr;
- dump->regs.pc = regs->pc;
- dump->regs.fmtvec = (regs->format << 12) | regs->vector;
- /* dump floating point stuff */
- dump->u_fpvalid = dump_fpu (regs, &dump->m68kfp);
-}
-EXPORT_SYMBOL(dump_thread);
-
-/*
* sys_execve() executes a new program.
*/
asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp)
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index 9a06c48..bba6503 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -450,7 +450,7 @@
static void c_stop(struct seq_file *m, void *v)
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index 97f556f..fd4858e 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -23,7 +23,6 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
-#include <linux/a.out.h>
#include <linux/user.h>
#include <linux/string.h>
#include <linux/linkage.h>
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 6abbbb8..548a7b3 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -64,6 +64,9 @@
config NO_IOPORT
def_bool y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
source "init/Kconfig"
menu "Processor type and features"
@@ -522,6 +525,11 @@
running more threads on a system and also reduces the pressure
on the VM subsystem for higher order allocations.
+config HZ
+ int
+ default 1000 if CLEOPATRA
+ default 100
+
comment "RAM configuration"
config RAMBASE
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 156c6c6..d6f0200 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -260,7 +260,7 @@
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 197d797..413bd1d 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -338,8 +338,10 @@
init_8259A(0);
- for (i = I8259A_IRQ_BASE; i < I8259A_IRQ_BASE + 16; i++)
+ for (i = I8259A_IRQ_BASE; i < I8259A_IRQ_BASE + 16; i++) {
set_irq_chip_and_handler(i, &i8259A_chip, handle_level_irq);
+ set_irq_probe(i);
+ }
setup_irq(I8259A_IRQ_BASE + PIC_CASCADE_IR, &irq2);
}
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
index 7852c7c..290d8e3 100644
--- a/arch/mips/kernel/irixelf.c
+++ b/arch/mips/kernel/irixelf.c
@@ -591,9 +591,9 @@
return;
pp = (struct prda *) v;
- pp->prda_sys.t_pid = current->pid;
+ pp->prda_sys.t_pid = task_pid_vnr(current);
pp->prda_sys.t_prid = read_c0_prid();
- pp->prda_sys.t_rpid = current->pid;
+ pp->prda_sys.t_rpid = task_pid_vnr(current);
/* We leave the rest set to zero */
}
@@ -1170,11 +1170,11 @@
prstatus.pr_info.si_signo = prstatus.pr_cursig = signr;
prstatus.pr_sigpend = current->pending.signal.sig[0];
prstatus.pr_sighold = current->blocked.sig[0];
- psinfo.pr_pid = prstatus.pr_pid = current->pid;
- psinfo.pr_ppid = prstatus.pr_ppid = current->parent->pid;
- psinfo.pr_pgrp = prstatus.pr_pgrp = task_pgrp_nr(current);
- psinfo.pr_sid = prstatus.pr_sid = task_session_nr(current);
- if (current->pid == current->tgid) {
+ psinfo.pr_pid = prstatus.pr_pid = task_pid_vnr(current);
+ psinfo.pr_ppid = prstatus.pr_ppid = task_pid_vnr(current->parent);
+ psinfo.pr_pgrp = prstatus.pr_pgrp = task_pgrp_vnr(current);
+ psinfo.pr_sid = prstatus.pr_sid = task_session_vnr(current);
+ if (thread_group_leader(current)) {
/*
* This is the record for the group leader. Add in the
* cumulative times of previous dead threads. This total
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
index 5b10ac1..0215c80 100644
--- a/arch/mips/kernel/irixsig.c
+++ b/arch/mips/kernel/irixsig.c
@@ -578,10 +578,11 @@
#define W_MASK (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG)
-asmlinkage int irix_waitsys(int type, int pid,
+asmlinkage int irix_waitsys(int type, int upid,
struct irix5_siginfo __user *info, int options,
struct rusage __user *ru)
{
+ struct pid *pid = NULL;
int flag, retval;
DECLARE_WAITQUEUE(wait, current);
struct task_struct *tsk;
@@ -604,6 +605,8 @@
if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL)
return -EINVAL;
+ if (type != IRIX_P_ALL)
+ pid = find_get_pid(upid);
add_wait_queue(¤t->signal->wait_chldexit, &wait);
repeat:
flag = 0;
@@ -612,9 +615,9 @@
tsk = current;
list_for_each(_p, &tsk->children) {
p = list_entry(_p, struct task_struct, sibling);
- if ((type == IRIX_P_PID) && p->pid != pid)
+ if ((type == IRIX_P_PID) && task_pid(p) != pid)
continue;
- if ((type == IRIX_P_PGID) && task_pgrp_nr(p) != pid)
+ if ((type == IRIX_P_PGID) && task_pgrp(p) != pid)
continue;
if ((p->exit_signal != SIGCHLD))
continue;
@@ -639,7 +642,7 @@
retval = __put_user(SIGCHLD, &info->sig);
retval |= __put_user(0, &info->code);
- retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
+ retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid);
retval |= __put_user((p->exit_code >> 8) & 0xff,
&info->stuff.procinfo.procdata.child.status);
retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
@@ -657,7 +660,7 @@
getrusage(p, RUSAGE_BOTH, ru);
retval = __put_user(SIGCHLD, &info->sig);
retval |= __put_user(1, &info->code); /* CLD_EXITED */
- retval |= __put_user(p->pid, &info->stuff.procinfo.pid);
+ retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid);
retval |= __put_user((p->exit_code >> 8) & 0xff,
&info->stuff.procinfo.procdata.child.status);
retval |= __put_user(p->utime,
@@ -665,7 +668,7 @@
retval |= __put_user(p->stime,
&info->stuff.procinfo.procdata.child.stime);
if (retval)
- return retval;
+ goto end_waitsys;
if (p->real_parent != p->parent) {
write_lock_irq(&tasklist_lock);
@@ -698,6 +701,7 @@
end_waitsys:
current->state = TASK_RUNNING;
remove_wait_queue(¤t->signal->wait_chldexit, &wait);
+ put_pid(pid);
return retval;
}
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index d06e9c9..e3309ff 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -145,6 +145,11 @@
void __init init_IRQ(void)
{
+ int i;
+
+ for (i = 0; i < NR_IRQS; i++)
+ set_irq_noprobe(i);
+
arch_init_irq();
#ifdef CONFIG_KGDB
diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c
index 22fd41e..d70c4e0 100644
--- a/arch/mips/kernel/sysirix.c
+++ b/arch/mips/kernel/sysirix.c
@@ -582,8 +582,8 @@
asmlinkage int irix_getpid(struct pt_regs *regs)
{
- regs->regs[3] = current->real_parent->pid;
- return current->pid;
+ regs->regs[3] = task_pid_vnr(current->real_parent);
+ return task_pid_vnr(current);
}
asmlinkage int irix_getuid(struct pt_regs *regs)
@@ -763,11 +763,11 @@
printk("[%s:%d] setpgrp(%d) ", current->comm, current->pid, flags);
#endif
if(!flags)
- error = task_pgrp_nr(current);
+ error = task_pgrp_vnr(current);
else
error = sys_setsid();
#ifdef DEBUG_PROCGRPS
- printk("returning %d\n", task_pgrp_nr(current));
+ printk("returning %d\n", error);
#endif
return error;
@@ -1093,10 +1093,10 @@
pid, pgrp);
#endif
if(!pid)
- pid = current->pid;
+ pid = task_pid_vnr(current);
/* Wheee, weird sysv thing... */
- if ((pgrp == 0) && (pid == current->pid))
+ if ((pgrp == 0) && (pid == task_pid_vnr(current)))
error = sys_setsid();
else
error = sys_setpgid(pid, pgrp);
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
new file mode 100644
index 0000000..eedc3a5
--- /dev/null
+++ b/arch/mn10300/Kconfig
@@ -0,0 +1,381 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux Kernel Configuration"
+
+config MN10300
+ def_bool y
+
+config AM33
+ def_bool y
+
+config MMU
+ def_bool y
+
+config HIGHMEM
+ def_bool n
+
+config NUMA
+ def_bool n
+
+config UID16
+ def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config GENERIC_FIND_NEXT_BIT
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_TIME
+ def_bool y
+
+config GENERIC_BUG
+ def_bool y
+
+config QUICKLIST
+ def_bool y
+
+config ARCH_HAS_ILOG2_U32
+ def_bool y
+
+config ARCH_SUPPORTS_AOUT
+ def_bool n
+
+# Use the generic interrupt handling code in kernel/irq/
+config GENERIC_HARDIRQS
+ def_bool y
+
+config HOTPLUG_CPU
+ def_bool n
+
+mainmenu "Matsushita MN10300/AM33 Kernel Configuration"
+
+source "init/Kconfig"
+
+
+menu "Matsushita MN10300 system setup"
+
+choice
+ prompt "Unit type"
+ default MN10300_UNIT_ASB2303
+ help
+ This option specifies board for which the kernel will be
+ compiled. It affects the external peripherals catered for.
+
+config MN10300_UNIT_ASB2303
+ bool "ASB2303"
+
+config MN10300_UNIT_ASB2305
+ bool "ASB2305"
+
+endchoice
+
+choice
+ prompt "Processor support"
+ default MN10300_PROC_MN103E010
+ help
+ This option specifies the processor for which the kernel will be
+ compiled. It affects the on-chip peripherals catered for.
+
+config MN10300_PROC_MN103E010
+ bool "MN103E010"
+ depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305
+ select MN10300_PROC_HAS_TTYSM0
+ select MN10300_PROC_HAS_TTYSM1
+ select MN10300_PROC_HAS_TTYSM2
+
+endchoice
+
+choice
+ prompt "Processor core support"
+ default MN10300_CPU_AM33V2
+ help
+ This option specifies the processor core for which the kernel will be
+ compiled. It affects the instruction set used.
+
+config MN10300_CPU_AM33V2
+ bool "AM33v2"
+
+endchoice
+
+config FPU
+ bool "FPU present"
+ default y
+ depends on MN10300_PROC_MN103E010
+
+choice
+ prompt "CPU Caching mode"
+ default MN10300_CACHE_WBACK
+ help
+ This option determines the caching mode for the kernel.
+
+ Write-Back caching mode involves the all reads and writes causing
+ the affected cacheline to be read into the cache first before being
+ operated upon. Memory is not then updated by a write until the cache
+ is filled and a cacheline needs to be displaced from the cache to
+ make room. Only at that point is it written back.
+
+ Write-Through caching only fetches cachelines from memory on a
+ read. Writes always get written directly to memory. If the affected
+ cacheline is also in cache, it will be updated too.
+
+ The final option is to turn of caching entirely.
+
+config MN10300_CACHE_WBACK
+ bool "Write-Back"
+
+config MN10300_CACHE_WTHRU
+ bool "Write-Through"
+
+config MN10300_CACHE_DISABLED
+ bool "Disabled"
+
+endchoice
+
+menu "Memory layout options"
+
+config KERNEL_RAM_BASE_ADDRESS
+ hex "Base address of kernel RAM"
+ default "0x90000000"
+
+config INTERRUPT_VECTOR_BASE
+ hex "Base address of vector table"
+ default "0x90000000"
+ help
+ The base address of the vector table will be programmed into
+ the TBR register. It must be on 16MiB address boundary.
+
+config KERNEL_TEXT_ADDRESS
+ hex "Base address of kernel"
+ default "0x90001000"
+
+config KERNEL_ZIMAGE_BASE_ADDRESS
+ hex "Base address of compressed vmlinux image"
+ default "0x90700000"
+
+endmenu
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+config PREEMPT_BKL
+ bool "Preempt The Big Kernel Lock"
+ depends on PREEMPT
+ default y
+ help
+ This option reduces the latency of the kernel by making the
+ big kernel lock preemptible.
+
+ Say Y here if you are building a kernel for a desktop system.
+ Say N if you are unsure.
+
+config MN10300_CURRENT_IN_E2
+ bool "Hold current task address in E2 register"
+ default y
+ help
+ This option removes the E2/R2 register from the set available to gcc
+ for normal use and instead uses it to store the address of the
+ current process's task_struct whilst in the kernel.
+
+ This means the kernel doesn't need to calculate the address each time
+ "current" is used (take SP, AND with mask and dereference pointer
+ just to get the address), and instead can just use E2+offset
+ addressing each time.
+
+ This has no effect on userspace.
+
+config MN10300_USING_JTAG
+ bool "Using JTAG to debug kernel"
+ default y
+ help
+ This options indicates that JTAG will be used to debug the kernel. It
+ suppresses the use of certain hardware debugging features, such as
+ single-stepping, which are taken over completely by the JTAG unit.
+
+config MN10300_RTC
+ bool "Using MN10300 RTC"
+ depends on MN10300_PROC_MN103E010
+ default n
+ help
+
+ This option enables support for the RTC, thus enabling time to be
+ tracked, even when system is powered down. This is available on-chip
+ on the MN103E010.
+
+config MN10300_WD_TIMER
+ bool "Using MN10300 watchdog timer"
+ default y
+ help
+ This options indicates that the watchdog timer will be used.
+
+config PCI
+ bool "Use PCI"
+ depends on MN10300_UNIT_ASB2305
+ default y
+ help
+ Some systems (such as the ASB2305) have PCI onboard. If you have one
+ of these boards and you wish to use the PCI facilities, say Y here.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+menu "MN10300 internal serial options"
+
+config MN10300_PROC_HAS_TTYSM0
+ bool
+ default n
+
+config MN10300_PROC_HAS_TTYSM1
+ bool
+ default n
+
+config MN10300_PROC_HAS_TTYSM2
+ bool
+ default n
+
+config MN10300_TTYSM
+ bool "Support for ttySM serial ports"
+ depends on MN10300
+ default y
+ select SERIAL_CORE
+ help
+ This option enables support for the on-chip serial ports that the
+ MN10300 has available.
+
+config MN10300_TTYSM_CONSOLE
+ bool "Support for console on ttySM serial ports"
+ depends on MN10300_TTYSM
+ select SERIAL_CORE_CONSOLE
+ help
+ This option enables support for a console on the on-chip serial ports
+ that the MN10300 has available.
+
+#
+# /dev/ttySM0
+#
+config MN10300_TTYSM0
+ bool "Enable SIF0 (/dev/ttySM0)"
+ depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0
+ help
+ Enable access to SIF0 through /dev/ttySM0 or gdb-stub
+
+choice
+ prompt "Select the timer to supply the clock for SIF0"
+ default MN10300_TTYSM0_TIMER8
+ depends on MN10300_TTYSM0
+
+config MN10300_TTYSM0_TIMER8
+ bool "Use timer 8 (16-bit)"
+
+config MN10300_TTYSM0_TIMER2
+ bool "Use timer 2 (8-bit)"
+
+endchoice
+
+#
+# /dev/ttySM1
+#
+config MN10300_TTYSM1
+ bool "Enable SIF1 (/dev/ttySM1)"
+ depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1
+ help
+ Enable access to SIF1 through /dev/ttySM1 or gdb-stub
+
+choice
+ prompt "Select the timer to supply the clock for SIF1"
+ default MN10300_TTYSM0_TIMER9
+ depends on MN10300_TTYSM1
+
+config MN10300_TTYSM1_TIMER9
+ bool "Use timer 9 (16-bit)"
+
+config MN10300_TTYSM1_TIMER3
+ bool "Use timer 3 (8-bit)"
+
+endchoice
+
+#
+# /dev/ttySM2
+#
+config MN10300_TTYSM2
+ bool "Enable SIF2 (/dev/ttySM2)"
+ depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2
+ help
+ Enable access to SIF2 through /dev/ttySM2 or gdb-stub
+
+choice
+ prompt "Select the timer to supply the clock for SIF2"
+ default MN10300_TTYSM0_TIMER10
+ depends on MN10300_TTYSM2
+
+config MN10300_TTYSM2_TIMER10
+ bool "Use timer 10 (16-bit)"
+
+endchoice
+
+config MN10300_TTYSM2_CTS
+ bool "Enable the use of the CTS line /dev/ttySM2"
+ depends on MN10300_TTYSM2
+
+endmenu
+
+source "mm/Kconfig"
+
+menu "Power management options"
+source kernel/power/Kconfig
+endmenu
+
+endmenu
+
+
+menu "Executable formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/mn10300/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+source "arch/mn10300/oprofile/Kconfig"
diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug
new file mode 100644
index 0000000..524e338
--- /dev/null
+++ b/arch/mn10300/Kconfig.debug
@@ -0,0 +1,135 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ depends on DEBUG_KERNEL
+
+config DEBUG_DECOMPRESS_KERNEL
+ bool "Using serial port during decompressing kernel"
+ depends on DEBUG_KERNEL
+ default n
+ help
+ If you say Y here you will confirm the start and the end of
+ decompressing Linux seeing "Uncompressing Linux... " and
+ "Ok, booting the kernel.\n" on console.
+
+config KPROBES
+ bool "Kprobes"
+ depends on DEBUG_KERNEL
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+
+config GDBSTUB
+ bool "Remote GDB kernel debugging"
+ depends on DEBUG_KERNEL
+ select DEBUG_INFO
+ select FRAME_POINTER
+ help
+ If you say Y here, it will be possible to remotely debug the kernel
+ using gdb. This enlarges your kernel ELF image disk size by several
+ megabytes and requires a machine with more than 16 MB, better 32 MB
+ RAM to avoid excessive linking time. This is only useful for kernel
+ hackers. If unsure, say N.
+
+config GDBSTUB_IMMEDIATE
+ bool "Break into GDB stub immediately"
+ depends on GDBSTUB
+ help
+ If you say Y here, GDB stub will break into the program as soon as
+ possible, leaving the program counter at the beginning of
+ start_kernel() in init/main.c.
+
+config GDB_CONSOLE
+ bool "Console output to GDB"
+ depends on GDBSTUB
+ help
+ If you are using GDB for remote debugging over a serial port and
+ would like kernel messages to be formatted into GDB $O packets so
+ that GDB prints them as program output, say 'Y'.
+
+config GDBSTUB_DEBUGGING
+ bool "Debug GDB stub by messages to serial port"
+ depends on GDBSTUB
+ help
+ This causes debugging messages to be displayed at various points
+ during execution of the GDB stub routines. Such messages will be
+ displayed on ttyS0 if that isn't the GDB stub's port, or ttySM0
+ otherwise.
+
+config GDBSTUB_DEBUG_ENTRY
+ bool "Debug GDB stub entry"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about entry to or exit
+ from the main GDB stub routine.
+
+config GDBSTUB_DEBUG_PROTOCOL
+ bool "Debug GDB stub protocol"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about the GDB remote
+ protocol messages generated exchanged with GDB.
+
+config GDBSTUB_DEBUG_IO
+ bool "Debug GDB stub I/O"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about GDB stub's
+ low-level I/O.
+
+config GDBSTUB_DEBUG_BREAKPOINT
+ bool "Debug GDB stub breakpoint management"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about GDB stub's
+ breakpoint management.
+
+choice
+ prompt "GDB stub port"
+ default GDBSTUB_TTYSM0
+ depends on GDBSTUB
+ help
+ Select the serial port used for GDB-stub.
+
+config GDBSTUB_ON_TTYSM0
+ bool "/dev/ttySM0 [SIF0]"
+ depends on MN10300_TTYSM0
+ select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYSM1
+ bool "/dev/ttySM1 [SIF1]"
+ depends on MN10300_TTYSM1
+ select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYSM2
+ bool "/dev/ttySM2 [SIF2]"
+ depends on MN10300_TTYSM2
+ select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYS0
+ bool "/dev/ttyS0"
+ select GDBSTUB_ON_TTYSx
+
+config GDBSTUB_ON_TTYS1
+ bool "/dev/ttyS1"
+ select GDBSTUB_ON_TTYSx
+
+endchoice
+
+config GDBSTUB_ON_TTYSMx
+ bool
+ depends on GDBSTUB_ON_TTYSM0 || GDBSTUB_ON_TTYSM1 || GDBSTUB_ON_TTYSM2
+ default y
+
+config GDBSTUB_ON_TTYSx
+ bool
+ depends on GDBSTUB_ON_TTYS0 || GDBSTUB_ON_TTYS1
+ default y
+
+endmenu
diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile
new file mode 100644
index 0000000..6673a28
--- /dev/null
+++ b/arch/mn10300/Makefile
@@ -0,0 +1,135 @@
+###############################################################################
+#
+# MN10300 Kernel makefile system specifications
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+
+KBUILD_DEFCONFIG := asb2303_defconfig
+
+CCSPECS := $(shell $(CC) -v 2>&1 | grep "^Reading specs from " | head -1 | cut -c20-)
+CCDIR := $(strip $(patsubst %/specs,%,$(CCSPECS)))
+KBUILD_CPPFLAGS += -nostdinc -I$(CCDIR)/include
+
+LDFLAGS :=
+OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+#LDFLAGS_vmlinux := -Map linkmap.txt
+CHECKFLAGS +=
+
+PROCESSOR := unset
+UNIT := unset
+
+KBUILD_CFLAGS += -mam33 -mmem-funcs -DCPU=AM33
+KBUILD_AFLAGS += -mam33 -DCPU=AM33
+
+ifeq ($(CONFIG_MN10300_CURRENT_IN_E2),y)
+KBUILD_CFLAGS += -ffixed-e2 -fcall-saved-e5
+endif
+
+ifeq ($(CONFIG_MN10300_PROC_MN103E010),y)
+PROCESSOR := mn103e010
+endif
+
+ifeq ($(CONFIG_MN10300_UNIT_ASB2303),y)
+UNIT := asb2303
+endif
+ifeq ($(CONFIG_MN10300_UNIT_ASB2305),y)
+UNIT := asb2305
+endif
+
+
+head-y := arch/mn10300/kernel/head.o arch/mn10300/kernel/init_task.o
+
+core-y += arch/mn10300/kernel/ arch/mn10300/mm/
+
+ifneq ($(PROCESSOR),unset)
+core-y += arch/mn10300/proc-$(PROCESSOR)/
+endif
+ifneq ($(UNIT),unset)
+core-y += arch/mn10300/unit-$(UNIT)/
+endif
+libs-y += arch/mn10300/lib/
+
+drivers-$(CONFIG_OPROFILE) += arch/mn10300/oprofile/
+
+boot := arch/mn10300/boot
+
+.PHONY: zImage
+
+KBUILD_IMAGE := $(boot)/zImage
+CLEAN_FILES += $(boot)/zImage
+CLEAN_FILES += $(boot)/compressed/vmlinux
+CLEAN_FILES += $(boot)/compressed/vmlinux.bin
+CLEAN_FILES += $(boot)/compressed/vmlinux.bin.gz
+
+zImage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+all: zImage
+
+bootstrap:
+ $(Q)$(MAKEBOOT) bootstrap
+
+archclean:
+ $(Q)$(MAKE) $(clean)=arch/mn10300/proc-mn103e010
+ $(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2303
+ $(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2305
+
+define archhelp
+ echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
+endef
+
+# If you make sure the .S files get compiled with debug info,
+# uncomment the following to disable optimisations
+# that are unhelpful whilst debugging.
+ifdef CONFIG_DEBUG_INFO
+#KBUILD_CFLAGS += -O1
+KBUILD_AFLAGS += -Wa,--gdwarf2
+endif
+
+###################################################################################################
+#
+# juggle some symlinks in the MN10300 asm include dir
+#
+# Update machine proc and unit symlinks if something which affects
+# them changed. We use .proc / .unit to indicate when they were
+# updated last, otherwise make uses the target directory mtime.
+#
+###################################################################################################
+
+# processor specific definitions
+include/asm-mn10300/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf
+ @echo ' SYMLINK include/asm-mn10300/proc -> include/asm-mn10300/proc-$(PROCESSOR)'
+ifneq ($(KBUILD_SRC),)
+ $(Q)mkdir -p include/asm-mn10300
+ $(Q)ln -fsn $(srctree)/include/asm-mn10300/proc-$(PROCESSOR) include/asm-mn10300/proc
+else
+ $(Q)ln -fsn proc-$(PROCESSOR) include/asm-mn10300/proc
+endif
+ @touch $@
+
+CLEAN_FILES += include/asm-mn10300/proc include/asm-mn10300/.proc
+
+prepare: include/asm-mn10300/.proc
+
+# unit specific definitions
+include/asm-mn10300/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf
+ @echo ' SYMLINK include/asm-mn10300/unit -> include/asm-mn10300/unit-$(UNIT)'
+ifneq ($(KBUILD_SRC),)
+ $(Q)mkdir -p include/asm-mn10300
+ $(Q)ln -fsn $(srctree)/include/asm-mn10300/unit-$(UNIT) include/asm-mn10300/unit
+else
+ $(Q)ln -fsn unit-$(UNIT) include/asm-mn10300/unit
+endif
+ @touch $@
+
+CLEAN_FILES += include/asm-mn10300/unit include/asm-mn10300/.unit
+
+prepare: include/asm-mn10300/.unit
diff --git a/arch/mn10300/boot/.gitignore b/arch/mn10300/boot/.gitignore
new file mode 100644
index 0000000..b6718de
--- /dev/null
+++ b/arch/mn10300/boot/.gitignore
@@ -0,0 +1 @@
+zImage
diff --git a/arch/mn10300/boot/Makefile b/arch/mn10300/boot/Makefile
new file mode 100644
index 0000000..36c9caf
--- /dev/null
+++ b/arch/mn10300/boot/Makefile
@@ -0,0 +1,28 @@
+# MN10300 kernel compressor and wrapper
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+
+targets := vmlinux.bin zImage
+
+subdir- := compressed
+
+# ---------------------------------------------------------------------------
+
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo 'Kernel: $@ is ready'
+
+$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
diff --git a/arch/mn10300/boot/compressed/Makefile b/arch/mn10300/boot/compressed/Makefile
new file mode 100644
index 0000000..08a95e1
--- /dev/null
+++ b/arch/mn10300/boot/compressed/Makefile
@@ -0,0 +1,22 @@
+#
+# Create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
+
+LDFLAGS_vmlinux := -Ttext $(CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS) -e startup_32
+
+$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-am33lin -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.lds $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
diff --git a/arch/mn10300/boot/compressed/head.S b/arch/mn10300/boot/compressed/head.S
new file mode 100644
index 0000000..502e1eb
--- /dev/null
+++ b/arch/mn10300/boot/compressed/head.S
@@ -0,0 +1,86 @@
+/* Boot entry point for a compressed MN10300 kernel
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+ .section .text
+
+#define DEBUG
+
+#include <linux/linkage.h>
+#include <asm/cpu-regs.h>
+
+ .globl startup_32
+startup_32:
+ # first save off parameters from bootloader
+ mov param_save_area,a0
+ mov d0,(a0)
+ mov d1,(4,a0)
+ mov d2,(8,a0)
+
+ mov sp,a3
+ mov decomp_stack+0x2000-4,a0
+ mov a0,sp
+
+ # invalidate and enable both of the caches
+ mov CHCTR,a0
+ clr d0
+ movhu d0,(a0) # turn off first
+ mov CHCTR_ICINV|CHCTR_DCINV,d0
+ movhu d0,(a0)
+ setlb
+ mov (a0),d0
+ btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
+ lne
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD,d0 # writethru dcache
+ movhu d0,(a0) # enable
+
+ # clear the BSS area
+ mov __bss_start,a0
+ mov _end,a1
+ clr d0
+bssclear:
+ cmp a1,a0
+ bge bssclear_end
+ movbu d0,(a0)
+ inc a0
+ bra bssclear
+bssclear_end:
+
+ # decompress the kernel
+ call decompress_kernel[],0
+
+ # disable caches again
+ mov CHCTR,a0
+ clr d0
+ movhu d0,(a0)
+ setlb
+ mov (a0),d0
+ btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
+ lne
+
+ mov param_save_area,a0
+ mov (a0),d0
+ mov (4,a0),d1
+ mov (8,a0),d2
+
+ mov a3,sp
+ mov CONFIG_KERNEL_TEXT_ADDRESS,a0
+ jmp (a0)
+
+ .data
+ .align 4
+param_save_area:
+ .rept 3
+ .word 0
+ .endr
+
+ .section .bss
+ .align 4
+decomp_stack:
+ .space 0x2000
diff --git a/arch/mn10300/boot/compressed/misc.c b/arch/mn10300/boot/compressed/misc.c
new file mode 100644
index 0000000..ded207e
--- /dev/null
+++ b/arch/mn10300/boot/compressed/misc.c
@@ -0,0 +1,429 @@
+/* MN10300 Miscellaneous helper routines for kernel decompressor
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from arch/x86/boot/compressed/misc_32.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/compiler.h>
+#include <asm/serial-regs.h>
+#include "misc.h"
+
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+/* display 'Uncompressing Linux... ' messages on ttyS0 or ttyS1 */
+#if 1 /* ttyS0 */
+#define CYG_DEV_BASE 0xA6FB0000
+#else /* ttyS1 */
+#define CYG_DEV_BASE 0xA6FC0000
+#endif
+
+#define CYG_DEV_THR (*((volatile __u8*)(CYG_DEV_BASE + 0x00)))
+#define CYG_DEV_MCR (*((volatile __u8*)(CYG_DEV_BASE + 0x10)))
+#define SIO_MCR_DTR 0x01
+#define SIO_MCR_RTS 0x02
+#define CYG_DEV_LSR (*((volatile __u8*)(CYG_DEV_BASE + 0x14)))
+#define SIO_LSR_THRE 0x20 /* transmitter holding register empty */
+#define SIO_LSR_TEMT 0x40 /* transmitter register empty */
+#define CYG_DEV_MSR (*((volatile __u8*)(CYG_DEV_BASE + 0x18)))
+#define SIO_MSR_CTS 0x10 /* clear to send */
+#define SIO_MSR_DSR 0x20 /* data set ready */
+
+#define LSR_WAIT_FOR(STATE) \
+ do { while (!(CYG_DEV_LSR & SIO_LSR_##STATE)) {} } while (0)
+#define FLOWCTL_QUERY(LINE) \
+ ({ CYG_DEV_MSR & SIO_MSR_##LINE; })
+#define FLOWCTL_WAIT_FOR(LINE) \
+ do { while (!(CYG_DEV_MSR & SIO_MSR_##LINE)) {} } while (0)
+#define FLOWCTL_CLEAR(LINE) \
+ do { CYG_DEV_MCR &= ~SIO_MCR_##LINE; } while (0)
+#define FLOWCTL_SET(LINE) \
+ do { CYG_DEV_MCR |= SIO_MCR_##LINE; } while (0)
+#endif
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+
+static inline void *memset(const void *s, int c, size_t n)
+{
+ int i;
+ char *ss = (char *) s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
+ return (void *)s;
+}
+
+#define memzero(s, n) memset((s), 0, (n))
+
+static inline void *memcpy(void *__dest, const void *__src, size_t __n)
+{
+ int i;
+ const char *s = __src;
+ char *d = __dest;
+
+ for (i = 0; i < __n; i++)
+ d[i] = s[i];
+ return __dest;
+}
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x8000 /* Window size must be at least 32k, and a power of
+ * two */
+
+static uch *inbuf; /* input buffer */
+static uch window[WSIZE]; /* sliding window buffer */
+
+static unsigned insize; /* valid bytes in inbuf */
+static unsigned inptr; /* index of next byte to be processed in inbuf */
+static unsigned outcnt; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond, msg) { if (!(cond)) error(msg); }
+# define Trace(x) fprintf x
+# define Tracev(x) { if (verbose) fprintf x ; }
+# define Tracevv(x) { if (verbose > 1) fprintf x ; }
+# define Tracec(c, x) { if (verbose && (c)) fprintf x ; }
+# define Tracecv(c, x) { if (verbose > 1 && (c)) fprintf x ; }
+#else
+# define Assert(cond, msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c, x)
+# define Tracecv(c, x)
+#endif
+
+static int fill_inbuf(void);
+static void flush_window(void);
+static void error(const char *) __attribute__((noreturn));
+static void kputs(const char *);
+
+static inline unsigned char get_byte(void)
+{
+ unsigned char ch = inptr < insize ? inbuf[inptr++] : fill_inbuf();
+
+#if 0
+ char hex[3];
+ hex[0] = ((ch & 0x0f) > 9) ?
+ ((ch & 0x0f) + 'A' - 0xa) : ((ch & 0x0f) + '0');
+ hex[1] = ((ch >> 4) > 9) ?
+ ((ch >> 4) + 'A' - 0xa) : ((ch >> 4) + '0');
+ hex[2] = 0;
+ kputs(hex);
+#endif
+ return ch;
+}
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define EXT_MEM_K (*(unsigned short *)0x90002)
+#ifndef STANDARD_MEMORY_BIOS_CALL
+#define ALT_MEM_K (*(unsigned long *) 0x901e0)
+#endif
+#define SCREEN_INFO (*(struct screen_info *)0x90000)
+
+static long bytes_out;
+static uch *output_data;
+static unsigned long output_ptr;
+
+
+static void *malloc(int size);
+
+static inline void free(void *where)
+{ /* Don't care */
+}
+
+static unsigned long free_mem_ptr = (unsigned long) &end;
+static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
+
+static inline void gzip_mark(void **ptr)
+{
+ kputs(".");
+ *ptr = (void *) free_mem_ptr;
+}
+
+static inline void gzip_release(void **ptr)
+{
+ free_mem_ptr = (unsigned long) *ptr;
+}
+
+#define INPLACE_MOVE_ROUTINE 0x1000
+#define LOW_BUFFER_START 0x2000
+#define LOW_BUFFER_END 0x90000
+#define LOW_BUFFER_SIZE (LOW_BUFFER_END - LOW_BUFFER_START)
+#define HEAP_SIZE 0x3000
+static int high_loaded;
+static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/;
+
+static char *vidmem = (char *)0xb8000;
+static int lines, cols;
+
+#include "../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+ void *p;
+
+ if (size < 0)
+ error("Malloc error\n");
+ if (!free_mem_ptr)
+ error("Memory error\n");
+
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+ p = (void *) free_mem_ptr;
+ free_mem_ptr += size;
+
+ if (free_mem_ptr >= free_mem_end_ptr)
+ error("\nOut of memory\n");
+
+ return p;
+}
+
+static inline void scroll(void)
+{
+ int i;
+
+ memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
+ for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
+ vidmem[i] = ' ';
+}
+
+static inline void kputchar(unsigned char ch)
+{
+#ifdef CONFIG_MN10300_UNIT_ASB2305
+ while (SC0STR & SC01STR_TBF)
+ continue;
+
+ if (ch == 0x0a) {
+ SC0TXB = 0x0d;
+ while (SC0STR & SC01STR_TBF)
+ continue;
+ }
+
+ SC0TXB = ch;
+
+#else
+ while (SC1STR & SC01STR_TBF)
+ continue;
+
+ if (ch == 0x0a) {
+ SC1TXB = 0x0d;
+ while (SC1STR & SC01STR_TBF)
+ continue;
+ }
+
+ SC1TXB = ch;
+
+#endif
+}
+
+static void kputs(const char *s)
+{
+#ifdef CONFIG_DEBUG_DECOMPRESS_KERNEL
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ while (*s) {
+ LSR_WAIT_FOR(THRE);
+
+ ch = *s++;
+ if (ch == 0x0a) {
+ CYG_DEV_THR = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ }
+ CYG_DEV_THR = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+#else
+
+ for (; *s; s++)
+ kputchar(*s);
+
+#endif
+#endif /* CONFIG_DEBUG_DECOMPRESS_KERNEL */
+}
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+static int fill_inbuf()
+{
+ if (insize != 0)
+ error("ran out of input data\n");
+
+ inbuf = input_data;
+ insize = input_len;
+ inptr = 1;
+ return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void flush_window_low(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out++ = *in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void flush_window_high(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, ch;
+ in = window;
+ for (n = 0; n < outcnt; n++) {
+ ch = *output_data++ = *in++;
+ if ((ulg) output_data == LOW_BUFFER_END)
+ output_data = high_buffer_start;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void flush_window(void)
+{
+ if (high_loaded)
+ flush_window_high();
+ else
+ flush_window_low();
+}
+
+static void error(const char *x)
+{
+ kputs("\n\n");
+ kputs(x);
+ kputs("\n\n -- System halted");
+
+ while (1)
+ /* Halt */;
+}
+
+#define STACK_SIZE (4096)
+
+long user_stack[STACK_SIZE];
+
+struct {
+ long *a;
+ short b;
+} stack_start = { &user_stack[STACK_SIZE], 0 };
+
+void setup_normal_output_buffer(void)
+{
+#ifdef STANDARD_MEMORY_BIOS_CALL
+ if (EXT_MEM_K < 1024)
+ error("Less than 2MB of memory.\n");
+#else
+ if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024)
+ error("Less than 2MB of memory.\n");
+#endif
+ output_data = (char *) 0x100000; /* Points to 1M */
+}
+
+struct moveparams {
+ uch *low_buffer_start;
+ int lcount;
+ uch *high_buffer_start;
+ int hcount;
+};
+
+void setup_output_buffer_if_we_run_high(struct moveparams *mv)
+{
+ high_buffer_start = (uch *)(((ulg) &end) + HEAP_SIZE);
+#ifdef STANDARD_MEMORY_BIOS_CALL
+ if (EXT_MEM_K < (3 * 1024))
+ error("Less than 4MB of memory.\n");
+#else
+ if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3 * 1024))
+ error("Less than 4MB of memory.\n");
+#endif
+ mv->low_buffer_start = output_data = (char *) LOW_BUFFER_START;
+ high_loaded = 1;
+ free_mem_end_ptr = (long) high_buffer_start;
+ if (0x100000 + LOW_BUFFER_SIZE > (ulg) high_buffer_start) {
+ high_buffer_start = (uch *)(0x100000 + LOW_BUFFER_SIZE);
+ mv->hcount = 0; /* say: we need not to move high_buffer */
+ } else {
+ mv->hcount = -1;
+ }
+ mv->high_buffer_start = high_buffer_start;
+}
+
+void close_output_buffer_if_we_run_high(struct moveparams *mv)
+{
+ mv->lcount = bytes_out;
+ if (bytes_out > LOW_BUFFER_SIZE) {
+ mv->lcount = LOW_BUFFER_SIZE;
+ if (mv->hcount)
+ mv->hcount = bytes_out - LOW_BUFFER_SIZE;
+ } else {
+ mv->hcount = 0;
+ }
+}
+
+#undef DEBUGFLAG
+#ifdef DEBUGFLAG
+int debugflag;
+#endif
+
+int decompress_kernel(struct moveparams *mv)
+{
+#ifdef DEBUGFLAG
+ while (!debugflag)
+ barrier();
+#endif
+
+ output_data = (char *) CONFIG_KERNEL_TEXT_ADDRESS;
+
+ makecrc();
+ kputs("Uncompressing Linux... ");
+ gunzip();
+ kputs("Ok, booting the kernel.\n");
+ return 0;
+}
diff --git a/arch/mn10300/boot/compressed/misc.h b/arch/mn10300/boot/compressed/misc.h
new file mode 100644
index 0000000..da921cd
--- /dev/null
+++ b/arch/mn10300/boot/compressed/misc.h
@@ -0,0 +1,18 @@
+/* Internal definitions for the MN10300 kernel decompressor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+extern int end;
+
+/*
+ * vmlinux.lds
+ */
+extern char input_data[];
+extern int input_len;
diff --git a/arch/mn10300/boot/compressed/vmlinux.lds b/arch/mn10300/boot/compressed/vmlinux.lds
new file mode 100644
index 0000000..a0849036
--- /dev/null
+++ b/arch/mn10300/boot/compressed/vmlinux.lds
@@ -0,0 +1,9 @@
+SECTIONS
+{
+ .data : {
+ input_len = .;
+ LONG(input_data_end - input_data) input_data = .;
+ *(.data)
+ input_data_end = .;
+ }
+}
diff --git a/arch/mn10300/boot/install.sh b/arch/mn10300/boot/install.sh
new file mode 100644
index 0000000..072951c
--- /dev/null
+++ b/arch/mn10300/boot/install.sh
@@ -0,0 +1,67 @@
+#!/bin/sh
+#
+# arch/mn10300/boot/install -c.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# Licence. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+#
+# "make install -c" script for i386 architecture
+#
+# Arguments:
+# $1 - kernel version
+# $2 - kernel image file
+# $3 - kernel map file
+# $4 - default install -c path (blank if root directory)
+# $5 - boot rom file
+#
+
+# User may have a custom install -c script
+
+rm -fr $4/../usr/include/linux $4/../usr/include/asm
+install -c -m 0755 $2 $4/vmlinuz
+install -c -m 0755 $5 $4/boot.rom
+install -c -m 0755 -d $4/../usr/include/linux
+cd $TOPDIR/include/linux
+for i in `find . -maxdepth 1 -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux
+done
+install -c -m 0755 -d $4/../usr/include/linux/byteorder
+cd $TOPDIR/include/linux/byteorder
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/byteorder
+done
+install -c -m 0755 -d $4/../usr/include/linux/lockd
+cd $TOPDIR/include/linux/lockd
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/lockd
+done
+install -c -m 0755 -d $4/../usr/include/linux/netfilter_ipv4
+cd $TOPDIR/include/linux/netfilter_ipv4
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/netfilter_ipv4
+done
+install -c -m 0755 -d $4/../usr/include/linux/nfsd
+cd $TOPDIR/include/linux/nfsd
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/nfsd/$i
+done
+install -c -m 0755 -d $4/../usr/include/linux/raid
+cd $TOPDIR/include/linux/raid
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/raid
+done
+install -c -m 0755 -d $4/../usr/include/linux/sunrpc
+cd $TOPDIR/include/linux/sunrpc
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/sunrpc
+done
+install -c -m 0755 -d $4/../usr/include/asm
+cd $TOPDIR/include/asm
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/asm
+done
diff --git a/arch/mn10300/boot/tools/build.c b/arch/mn10300/boot/tools/build.c
new file mode 100644
index 0000000..4f552ea
--- /dev/null
+++ b/arch/mn10300/boot/tools/build.c
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright (C) 1997 Martin Mares
+ */
+
+/*
+ * This file builds a disk-image from three different files:
+ *
+ * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
+ * - setup: 8086 machine code, sets up system parm
+ * - system: 80386 code for actual system
+ *
+ * It does some checking that all files are of the correct type, and
+ * just writes the result to stdout, removing headers and padding to
+ * the right amount. It also writes some system data to stderr.
+ */
+
+/*
+ * Changes by tytso to allow root device specification
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ * Cross compiling fixes by Gertjan van Wingerde, July 1996
+ * Rewritten by Martin Mares, April 1997
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/sysmacros.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <asm/boot.h>
+
+#define DEFAULT_MAJOR_ROOT 0
+#define DEFAULT_MINOR_ROOT 0
+
+/* Minimal number of setup sectors (see also bootsect.S) */
+#define SETUP_SECTS 4
+
+uint8_t buf[1024];
+int fd;
+int is_big_kernel;
+
+__attribute__((noreturn))
+void die(const char *str, ...)
+{
+ va_list args;
+ va_start(args, str);
+ vfprintf(stderr, str, args);
+ fputc('\n', stderr);
+ exit(1);
+}
+
+void file_open(const char *name)
+{
+ fd = open(name, O_RDONLY, 0);
+ if (fd < 0)
+ die("Unable to open `%s': %m", name);
+}
+
+__attribute__((noreturn))
+void usage(void)
+{
+ die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
+}
+
+int main(int argc, char **argv)
+{
+ unsigned int i, c, sz, setup_sectors;
+ uint32_t sys_size;
+ uint8_t major_root, minor_root;
+ struct stat sb;
+
+ if (argc > 2 && !strcmp(argv[1], "-b")) {
+ is_big_kernel = 1;
+ argc--, argv++;
+ }
+ if ((argc < 4) || (argc > 5))
+ usage();
+ if (argc > 4) {
+ if (!strcmp(argv[4], "CURRENT")) {
+ if (stat("/", &sb)) {
+ perror("/");
+ die("Couldn't stat /");
+ }
+ major_root = major(sb.st_dev);
+ minor_root = minor(sb.st_dev);
+ } else if (strcmp(argv[4], "FLOPPY")) {
+ if (stat(argv[4], &sb)) {
+ perror(argv[4]);
+ die("Couldn't stat root device.");
+ }
+ major_root = major(sb.st_rdev);
+ minor_root = minor(sb.st_rdev);
+ } else {
+ major_root = 0;
+ minor_root = 0;
+ }
+ } else {
+ major_root = DEFAULT_MAJOR_ROOT;
+ minor_root = DEFAULT_MINOR_ROOT;
+ }
+ fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
+
+ file_open(argv[1]);
+ i = read(fd, buf, sizeof(buf));
+ fprintf(stderr, "Boot sector %d bytes.\n", i);
+ if (i != 512)
+ die("Boot block must be exactly 512 bytes");
+ if (buf[510] != 0x55 || buf[511] != 0xaa)
+ die("Boot block hasn't got boot flag (0xAA55)");
+ buf[508] = minor_root;
+ buf[509] = major_root;
+ if (write(1, buf, 512) != 512)
+ die("Write call failed");
+ close(fd);
+
+ /* Copy the setup code */
+ file_open(argv[2]);
+ for (i = 0; (c = read(fd, buf, sizeof(buf))) > 0; i += c)
+ if (write(1, buf, c) != c)
+ die("Write call failed");
+ if (c != 0)
+ die("read-error on `setup'");
+ close(fd);
+
+ /* Pad unused space with zeros */
+ setup_sectors = (i + 511) / 512;
+ /* for compatibility with ancient versions of LILO. */
+ if (setup_sectors < SETUP_SECTS)
+ setup_sectors = SETUP_SECTS;
+ fprintf(stderr, "Setup is %d bytes.\n", i);
+ memset(buf, 0, sizeof(buf));
+ while (i < setup_sectors * 512) {
+ c = setup_sectors * 512 - i;
+ if (c > sizeof(buf))
+ c = sizeof(buf);
+ if (write(1, buf, c) != c)
+ die("Write call failed");
+ i += c;
+ }
+
+ file_open(argv[3]);
+ if (fstat(fd, &sb))
+ die("Unable to stat `%s': %m", argv[3]);
+ sz = sb.st_size;
+ fprintf(stderr, "System is %d kB\n", sz / 1024);
+ sys_size = (sz + 15) / 16;
+ /* 0x28000*16 = 2.5 MB, conservative estimate for the current maximum */
+ if (sys_size > (is_big_kernel ? 0x28000 : DEF_SYSSIZE))
+ die("System is too big. Try using %smodules.",
+ is_big_kernel ? "" : "bzImage or ");
+ if (sys_size > 0xffff)
+ fprintf(stderr,
+ "warning: kernel is too big for standalone boot "
+ "from floppy\n");
+ while (sz > 0) {
+ int l, n;
+
+ l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
+ n = read(fd, buf, l);
+ if (n != l) {
+ if (n < 0)
+ die("Error reading %s: %m", argv[3]);
+ else
+ die("%s: Unexpected EOF", argv[3]);
+ }
+ if (write(1, buf, l) != l)
+ die("Write failed");
+ sz -= l;
+ }
+ close(fd);
+
+ /* Write sizes to the bootsector */
+ if (lseek(1, 497, SEEK_SET) != 497)
+ die("Output: seek failed");
+ buf[0] = setup_sectors;
+ if (write(1, buf, 1) != 1)
+ die("Write of setup sector count failed");
+ if (lseek(1, 500, SEEK_SET) != 500)
+ die("Output: seek failed");
+ buf[0] = (sys_size & 0xff);
+ buf[1] = ((sys_size >> 8) & 0xff);
+ if (write(1, buf, 2) != 2)
+ die("Write of image length failed");
+
+ return 0;
+}
diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig
new file mode 100644
index 0000000..ca9876a
--- /dev/null
+++ b/arch/mn10300/configs/asb2303_defconfig
@@ -0,0 +1,558 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc2
+# Fri Nov 16 13:36:38 2007
+#
+CONFIG_MN10300=y
+CONFIG_AM33=y
+CONFIG_MMU=y
+# CONFIG_HIGHMEM is not set
+# CONFIG_NUMA is not set
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_BUG=y
+CONFIG_QUICKLIST=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+# CONFIG_ARCH_SUPPORTS_AOUT is not set
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+# CONFIG_BLOCK is not set
+
+#
+# Matsushita MN10300 system setup
+#
+CONFIG_MN10300_UNIT_ASB2303=y
+# CONFIG_MN10300_UNIT_ASB2305 is not set
+CONFIG_MN10300_PROC_MN103E010=y
+CONFIG_MN10300_CPU_AM33V2=y
+CONFIG_FPU=y
+CONFIG_MN10300_CACHE_WBACK=y
+# CONFIG_MN10300_CACHE_WTHRU is not set
+# CONFIG_MN10300_CACHE_DISABLED is not set
+
+#
+# Memory layout options
+#
+CONFIG_KERNEL_RAM_BASE_ADDRESS=0x90000000
+CONFIG_INTERRUPT_VECTOR_BASE=0x90000000
+CONFIG_KERNEL_TEXT_ADDRESS=0x90001000
+CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+CONFIG_MN10300_CURRENT_IN_E2=y
+CONFIG_MN10300_USING_JTAG=y
+CONFIG_MN10300_RTC=y
+CONFIG_MN10300_WD_TIMER=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# MN10300 internal serial options
+#
+CONFIG_MN10300_PROC_HAS_TTYSM0=y
+CONFIG_MN10300_PROC_HAS_TTYSM1=y
+CONFIG_MN10300_PROC_HAS_TTYSM2=y
+CONFIG_MN10300_TTYSM=y
+CONFIG_MN10300_TTYSM_CONSOLE=y
+CONFIG_MN10300_TTYSM0=y
+CONFIG_MN10300_TTYSM0_TIMER8=y
+# CONFIG_MN10300_TTYSM0_TIMER2 is not set
+CONFIG_MN10300_TTYSM1=y
+CONFIG_MN10300_TTYSM1_TIMER9=y
+# CONFIG_MN10300_TTYSM1_TIMER3 is not set
+# CONFIG_MN10300_TTYSM2 is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=1
+CONFIG_VIRT_TO_BUS=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Executable formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile
new file mode 100644
index 0000000..ef07c95
--- /dev/null
+++ b/arch/mn10300/kernel/Makefile
@@ -0,0 +1,27 @@
+#
+# Makefile for the MN10300-specific core kernel code
+#
+extra-y := head.o init_task.o vmlinux.lds
+
+obj-y := process.o semaphore.o signal.o entry.o fpu.o traps.o irq.o \
+ ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \
+ switch_to.o mn10300_ksyms.o kernel_execve.o
+
+obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o
+
+obj-$(CONFIG_FPU) += fpu-low.o
+
+obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \
+ mn10300-debug.o
+obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o
+obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
+obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
+
+ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
+obj-$(CONFIG_GDBSTUB) += gdb-cache.o
+endif
+
+obj-$(CONFIG_MN10300_RTC) += rtc.o
+obj-$(CONFIG_PROFILE) += profile.o profile-low.o
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_KPROBES) += kprobes.o
diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
new file mode 100644
index 0000000..ee2d9f8
--- /dev/null
+++ b/arch/mn10300/kernel/asm-offsets.c
@@ -0,0 +1,108 @@
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <asm/ucontext.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/ptrace.h>
+#include "sigframe.h"
+#include "mn10300-serial.h"
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->")
+
+#define OFFSET(sym, str, mem) \
+ DEFINE(sym, offsetof(struct str, mem));
+
+void foo(void)
+{
+ OFFSET(SIGCONTEXT_d0, sigcontext, d0);
+ OFFSET(SIGCONTEXT_d1, sigcontext, d1);
+ BLANK();
+
+ OFFSET(TI_task, thread_info, task);
+ OFFSET(TI_exec_domain, thread_info, exec_domain);
+ OFFSET(TI_flags, thread_info, flags);
+ OFFSET(TI_cpu, thread_info, cpu);
+ OFFSET(TI_preempt_count, thread_info, preempt_count);
+ OFFSET(TI_addr_limit, thread_info, addr_limit);
+ OFFSET(TI_restart_block, thread_info, restart_block);
+ BLANK();
+
+ OFFSET(REG_D0, pt_regs, d0);
+ OFFSET(REG_D1, pt_regs, d1);
+ OFFSET(REG_D2, pt_regs, d2);
+ OFFSET(REG_D3, pt_regs, d3);
+ OFFSET(REG_A0, pt_regs, a0);
+ OFFSET(REG_A1, pt_regs, a1);
+ OFFSET(REG_A2, pt_regs, a2);
+ OFFSET(REG_A3, pt_regs, a3);
+ OFFSET(REG_E0, pt_regs, e0);
+ OFFSET(REG_E1, pt_regs, e1);
+ OFFSET(REG_E2, pt_regs, e2);
+ OFFSET(REG_E3, pt_regs, e3);
+ OFFSET(REG_E4, pt_regs, e4);
+ OFFSET(REG_E5, pt_regs, e5);
+ OFFSET(REG_E6, pt_regs, e6);
+ OFFSET(REG_E7, pt_regs, e7);
+ OFFSET(REG_SP, pt_regs, sp);
+ OFFSET(REG_EPSW, pt_regs, epsw);
+ OFFSET(REG_PC, pt_regs, pc);
+ OFFSET(REG_LAR, pt_regs, lar);
+ OFFSET(REG_LIR, pt_regs, lir);
+ OFFSET(REG_MDR, pt_regs, mdr);
+ OFFSET(REG_MCVF, pt_regs, mcvf);
+ OFFSET(REG_MCRL, pt_regs, mcrl);
+ OFFSET(REG_MCRH, pt_regs, mcrh);
+ OFFSET(REG_MDRQ, pt_regs, mdrq);
+ OFFSET(REG_ORIG_D0, pt_regs, orig_d0);
+ OFFSET(REG_NEXT, pt_regs, next);
+ DEFINE(REG__END, sizeof(struct pt_regs));
+ BLANK();
+
+ OFFSET(THREAD_UREGS, thread_struct, uregs);
+ OFFSET(THREAD_PC, thread_struct, pc);
+ OFFSET(THREAD_SP, thread_struct, sp);
+ OFFSET(THREAD_A3, thread_struct, a3);
+ OFFSET(THREAD_USP, thread_struct, usp);
+ OFFSET(THREAD_FRAME, thread_struct, __frame);
+ BLANK();
+
+ DEFINE(CLONE_VM_asm, CLONE_VM);
+ DEFINE(CLONE_FS_asm, CLONE_FS);
+ DEFINE(CLONE_FILES_asm, CLONE_FILES);
+ DEFINE(CLONE_SIGHAND_asm, CLONE_SIGHAND);
+ DEFINE(CLONE_UNTRACED_asm, CLONE_UNTRACED);
+ DEFINE(SIGCHLD_asm, SIGCHLD);
+ BLANK();
+
+ OFFSET(EXEC_DOMAIN_handler, exec_domain, handler);
+ OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext);
+
+ DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
+
+ OFFSET(__rx_buffer, mn10300_serial_port, rx_buffer);
+ OFFSET(__rx_inp, mn10300_serial_port, rx_inp);
+ OFFSET(__rx_outp, mn10300_serial_port, rx_outp);
+ OFFSET(__tx_info_buffer, mn10300_serial_port, uart.info);
+ OFFSET(__tx_xchar, mn10300_serial_port, tx_xchar);
+ OFFSET(__tx_break, mn10300_serial_port, tx_break);
+ OFFSET(__intr_flags, mn10300_serial_port, intr_flags);
+ OFFSET(__rx_icr, mn10300_serial_port, rx_icr);
+ OFFSET(__tx_icr, mn10300_serial_port, tx_icr);
+ OFFSET(__tm_icr, mn10300_serial_port, _tmicr);
+ OFFSET(__iobase, mn10300_serial_port, _iobase);
+
+ DEFINE(__UART_XMIT_SIZE, UART_XMIT_SIZE);
+ OFFSET(__xmit_buffer, uart_info, xmit.buf);
+ OFFSET(__xmit_head, uart_info, xmit.head);
+ OFFSET(__xmit_tail, uart_info, xmit.tail);
+}
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
new file mode 100644
index 0000000..11de360
--- /dev/null
+++ b/arch/mn10300/kernel/entry.S
@@ -0,0 +1,721 @@
+###############################################################################
+#
+# MN10300 Exception and interrupt entry points
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/system.h>
+#include <asm/thread_info.h>
+#include <asm/intctl-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+#include <asm/asm-offsets.h>
+#include <asm/frame.inc>
+
+#ifdef CONFIG_PREEMPT
+#define preempt_stop __cli
+#else
+#define preempt_stop
+#define resume_kernel restore_all
+#endif
+
+ .macro __cli
+ and ~EPSW_IM,epsw
+ or EPSW_IE|MN10300_CLI_LEVEL,epsw
+ nop
+ nop
+ nop
+ .endm
+ .macro __sti
+ or EPSW_IE|EPSW_IM_7,epsw
+ .endm
+
+
+ .am33_2
+
+###############################################################################
+#
+# the return path for a forked child
+# - on entry, D0 holds the address of the previous task to run
+#
+###############################################################################
+ENTRY(ret_from_fork)
+ call schedule_tail[],0
+ GET_THREAD_INFO a2
+
+ # return 0 to indicate child process
+ clr d0
+ mov d0,(REG_D0,fp)
+ jmp syscall_exit
+
+###############################################################################
+#
+# system call handler
+#
+###############################################################################
+ENTRY(system_call)
+ add -4,sp
+ SAVE_ALL
+ mov d0,(REG_ORIG_D0,fp)
+ GET_THREAD_INFO a2
+ cmp nr_syscalls,d0
+ bcc syscall_badsys
+ btst _TIF_SYSCALL_TRACE,(TI_flags,a2)
+ bne syscall_trace_entry
+syscall_call:
+ add d0,d0,a1
+ add a1,a1
+ mov (REG_A0,fp),d0
+ mov (sys_call_table,a1),a0
+ calls (a0)
+ mov d0,(REG_D0,fp)
+syscall_exit:
+ # make sure we don't miss an interrupt setting need_resched or
+ # sigpending between sampling and the rti
+ __cli
+ mov (TI_flags,a2),d2
+ btst _TIF_ALLWORK_MASK,d2
+ bne syscall_exit_work
+restore_all:
+ RESTORE_ALL
+
+###############################################################################
+#
+# perform work that needs to be done immediately before resumption and syscall
+# tracing
+#
+###############################################################################
+ ALIGN
+syscall_exit_work:
+ btst _TIF_SYSCALL_TRACE,d2
+ beq work_pending
+ __sti # could let do_syscall_trace() call
+ # schedule() instead
+ mov fp,d0
+ mov 1,d1
+ call do_syscall_trace[],0 # do_syscall_trace(regs,entryexit)
+ jmp resume_userspace
+
+ ALIGN
+work_pending:
+ btst _TIF_NEED_RESCHED,d2
+ beq work_notifysig
+
+work_resched:
+ call schedule[],0
+
+ # make sure we don't miss an interrupt setting need_resched or
+ # sigpending between sampling and the rti
+ __cli
+
+ # is there any work to be done other than syscall tracing?
+ mov (TI_flags,a2),d2
+ btst _TIF_WORK_MASK,d2
+ beq restore_all
+ btst _TIF_NEED_RESCHED,d2
+ bne work_resched
+
+ # deal with pending signals and notify-resume requests
+work_notifysig:
+ mov fp,d0
+ mov d2,d1
+ call do_notify_resume[],0
+ jmp resume_userspace
+
+ # perform syscall entry tracing
+syscall_trace_entry:
+ mov -ENOSYS,d0
+ mov d0,(REG_D0,fp)
+ mov fp,d0
+ clr d1
+ call do_syscall_trace[],0
+ mov (REG_ORIG_D0,fp),d0
+ mov (REG_D1,fp),d1
+ cmp nr_syscalls,d0
+ bcs syscall_call
+ jmp syscall_exit
+
+syscall_badsys:
+ mov -ENOSYS,d0
+ mov d0,(REG_D0,fp)
+ jmp resume_userspace
+
+ # userspace resumption stub bypassing syscall exit tracing
+ .globl ret_from_exception, ret_from_intr
+ ALIGN
+ret_from_exception:
+ preempt_stop
+ret_from_intr:
+ GET_THREAD_INFO a2
+ mov (REG_EPSW,fp),d0 # need to deliver signals before
+ # returning to userspace
+ and EPSW_nSL,d0
+ beq resume_kernel # returning to supervisor mode
+
+ENTRY(resume_userspace)
+ # make sure we don't miss an interrupt setting need_resched or
+ # sigpending between sampling and the rti
+ __cli
+
+ # is there any work to be done on int/exception return?
+ mov (TI_flags,a2),d2
+ btst _TIF_WORK_MASK,d2
+ bne work_pending
+ jmp restore_all
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+ mov (TI_preempt_count,a2),d0 # non-zero preempt_count ?
+ cmp 0,d0
+ bne restore_all
+
+need_resched:
+ btst _TIF_NEED_RESCHED,(TI_flags,a2)
+ beq restore_all
+ mov (REG_EPSW,fp),d0
+ and EPSW_IM,d0
+ cmp EPSW_IM_7,d0 # interrupts off (exception path) ?
+ beq restore_all
+ call preempt_schedule_irq[],0
+ jmp need_resched
+#endif
+
+
+###############################################################################
+#
+# IRQ handler entry point
+# - intended to be entered at multiple priorities
+#
+###############################################################################
+ENTRY(irq_handler)
+ add -4,sp
+ SAVE_ALL
+
+ # it's not a syscall
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+ mov fp,d0
+ call do_IRQ[],0 # do_IRQ(regs)
+
+ jmp ret_from_intr
+
+###############################################################################
+#
+# Monitor Signal handler entry point
+#
+###############################################################################
+ENTRY(monitor_signal)
+ movbu (0xae000001),d1
+ cmp 1,d1
+ beq monsignal
+ ret [],0
+
+monsignal:
+ or EPSW_NMID,epsw
+ mov d0,a0
+ mov a0,sp
+ mov (REG_EPSW,fp),d1
+ and ~EPSW_nSL,d1
+ mov d1,(REG_EPSW,fp)
+ movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+ mov (sp),a1
+ mov a1,usp
+ movm (sp),[other]
+ add 4,sp
+here: jmp 0x8e000008-here+0x8e000008
+
+###############################################################################
+#
+# Double Fault handler entry point
+# - note that there will not be a stack, D0/A0 will hold EPSW/PC as were
+#
+###############################################################################
+ .section .bss
+ .balign THREAD_SIZE
+ .space THREAD_SIZE
+__df_stack:
+ .previous
+
+ENTRY(double_fault)
+ mov a0,(__df_stack-4) # PC as was
+ mov d0,(__df_stack-8) # EPSW as was
+ mn10300_set_dbfleds # display 'db-f' on the LEDs
+ mov 0xaa55aa55,d0
+ mov d0,(__df_stack-12) # no ORIG_D0
+ mov sp,a0 # save corrupted SP
+ mov __df_stack-12,sp # emergency supervisor stack
+ SAVE_ALL
+ mov a0,(REG_A0,fp) # save corrupted SP as A0 (which got
+ # clobbered by the CPU)
+ mov fp,d0
+ calls do_double_fault
+double_fault_loop:
+ bra double_fault_loop
+
+###############################################################################
+#
+# Bus Error handler entry point
+# - handle external (async) bus errors separately
+#
+###############################################################################
+ENTRY(raw_bus_error)
+ add -4,sp
+ mov d0,(sp)
+ mov (BCBERR),d0 # what
+ btst BCBERR_BEMR_DMA,d0 # see if it was an external bus error
+ beq __common_exception_aux # it wasn't
+
+ SAVE_ALL
+ mov (BCBEAR),d1 # destination of erroneous access
+
+ mov (REG_ORIG_D0,fp),d2
+ mov d2,(REG_D0,fp)
+ mov -1,d2
+ mov d2,(REG_ORIG_D0,fp)
+
+ add -4,sp
+ mov fp,(12,sp) # frame pointer
+ call io_bus_error[],0
+ jmp restore_all
+
+###############################################################################
+#
+# Miscellaneous exception entry points
+#
+###############################################################################
+ENTRY(nmi_handler)
+ add -4,sp
+ mov d0,(sp)
+ mov (TBR),d0
+ bra __common_exception_nonmi
+
+ENTRY(__common_exception)
+ add -4,sp
+ mov d0,(sp)
+
+__common_exception_aux:
+ mov (TBR),d0
+ and ~EPSW_NMID,epsw # turn NMIs back on if not NMI
+ or EPSW_IE,epsw
+
+__common_exception_nonmi:
+ and 0x0000FFFF,d0 # turn the exception code into a vector
+ # table index
+
+ btst 0x00000007,d0
+ bne 1f
+ cmp 0x00000400,d0
+ bge 1f
+
+ SAVE_ALL # build the stack frame
+
+ mov (REG_D0,fp),a2 # get the exception number
+ mov (REG_ORIG_D0,fp),d0
+ mov d0,(REG_D0,fp)
+ mov -1,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+#ifdef CONFIG_GDBSTUB
+ btst 0x01,(gdbstub_busy)
+ beq 2f
+ and ~EPSW_IE,epsw
+ mov fp,d0
+ mov a2,d1
+ call gdbstub_exception[],0 # gdbstub itself caused an exception
+ bra restore_all
+2:
+#endif
+
+ mov fp,d0 # arg 0: stacked register file
+ mov a2,d1 # arg 1: exception number
+ lsr 1,a2
+
+ mov (exception_table,a2),a2
+ calls (a2)
+ jmp ret_from_exception
+
+1: pi # BUG() equivalent
+
+###############################################################################
+#
+# Exception handler functions table
+#
+###############################################################################
+ .data
+ENTRY(exception_table)
+ .rept 0x400>>1
+ .long uninitialised_exception
+ .endr
+ .previous
+
+###############################################################################
+#
+# Change an entry in the exception table
+# - D0 exception code, D1 handler
+#
+###############################################################################
+ENTRY(set_excp_vector)
+ lsr 1,d0
+ add exception_table,d0
+ mov d1,(d0)
+ mov 4,d1
+#if defined(CONFIG_MN10300_CACHE_WBACK)
+ jmp mn10300_dcache_flush_inv_range2
+#else
+ ret [],0
+#endif
+
+###############################################################################
+#
+# System call table
+#
+###############################################################################
+ .data
+ENTRY(sys_call_table)
+ .long sys_restart_syscall /* 0 */
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long sys_execve
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_lchown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 - old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys() */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall /* old sys_olduname */
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long old_select
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_swapon
+ .long sys_reboot
+ .long old_readdir
+ .long old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* ioperm */
+ .long sys_socketcall
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_ni_syscall /* old sys_uname */
+ .long sys_ni_syscall /* 110 - iopl */
+ .long sys_vhangup
+ .long sys_ni_syscall /* old "idle" system call */
+ .long sys_ni_syscall /* vm86old */
+ .long sys_wait4
+ .long sys_swapoff /* 115 */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn
+ .long sys_clone /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_ni_syscall /* modify_ldt */
+ .long sys_adjtimex
+ .long sys_mprotect /* 125 */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "create_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* reserved for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_msync
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_mlock /* 150 */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_mremap
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_ni_syscall /* vm86 */
+ .long sys_ni_syscall /* Old sys_query_module */
+ .long sys_poll
+ .long sys_nfsservctl
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_chown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* reserved for streams1 */
+ .long sys_ni_syscall /* reserved for streams2 */
+ .long sys_vfork /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_lchown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_chown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_mincore
+ .long sys_madvise
+ .long sys_getdents64 /* 220 */
+ .long sys_fcntl64
+ .long sys_ni_syscall /* reserved for TUX */
+ .long sys_ni_syscall
+ .long sys_gettid
+ .long sys_readahead /* 225 */
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr
+ .long sys_getxattr
+ .long sys_lgetxattr /* 230 */
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr
+ .long sys_flistxattr
+ .long sys_removexattr /* 235 */
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_tkill
+ .long sys_sendfile64
+ .long sys_futex /* 240 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_ni_syscall /* sys_set_thread_area */
+ .long sys_ni_syscall /* sys_get_thread_area */
+ .long sys_io_setup /* 245 */
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel
+ .long sys_fadvise64 /* 250 */
+ .long sys_ni_syscall
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 255 */
+ .long sys_epoll_wait
+ .long sys_remap_file_pages
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 260 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 265 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 270 */
+ .long sys_utimes
+ .long sys_fadvise64_64
+ .long sys_ni_syscall /* sys_vserver */
+ .long sys_mbind
+ .long sys_get_mempolicy /* 275 */
+ .long sys_set_mempolicy
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive /* 280 */
+ .long sys_mq_notify
+ .long sys_mq_getsetattr
+ .long sys_kexec_load
+ .long sys_waitid
+ .long sys_ni_syscall /* 285 */ /* available */
+ .long sys_add_key
+ .long sys_request_key
+ .long sys_keyctl
+ .long sys_cacheflush
+ .long sys_ioprio_set /* 290 */
+ .long sys_ioprio_get
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
+ .long sys_migrate_pages /* 295 */
+ .long sys_openat
+ .long sys_mkdirat
+ .long sys_mknodat
+ .long sys_fchownat
+ .long sys_futimesat /* 300 */
+ .long sys_fstatat64
+ .long sys_unlinkat
+ .long sys_renameat
+ .long sys_linkat
+ .long sys_symlinkat /* 305 */
+ .long sys_readlinkat
+ .long sys_fchmodat
+ .long sys_faccessat
+ .long sys_pselect6
+ .long sys_ppoll /* 310 */
+ .long sys_unshare
+ .long sys_set_robust_list
+ .long sys_get_robust_list
+ .long sys_splice
+ .long sys_sync_file_range /* 315 */
+ .long sys_tee
+ .long sys_vmsplice
+ .long sys_move_pages
+ .long sys_getcpu
+ .long sys_epoll_pwait /* 320 */
+ .long sys_utimensat
+ .long sys_signalfd
+ .long sys_timerfd_create
+ .long sys_eventfd
+ .long sys_fallocate /* 325 */
+ .long sys_timerfd_settime
+ .long sys_timerfd_gettime
+
+
+nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/fpu-low.S b/arch/mn10300/kernel/fpu-low.S
new file mode 100644
index 0000000..96cfd47
--- /dev/null
+++ b/arch/mn10300/kernel/fpu-low.S
@@ -0,0 +1,197 @@
+/* MN10300 Low level FPU management operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cpu-regs.h>
+
+###############################################################################
+#
+# void fpu_init_state(void)
+# - initialise the FPU
+#
+###############################################################################
+ .globl fpu_init_state
+ .type fpu_init_state,@function
+fpu_init_state:
+ mov epsw,d0
+ or EPSW_FE,epsw
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+ nop
+#endif
+ fmov 0,fs0
+ fmov fs0,fs1
+ fmov fs0,fs2
+ fmov fs0,fs3
+ fmov fs0,fs4
+ fmov fs0,fs5
+ fmov fs0,fs6
+ fmov fs0,fs7
+ fmov fs0,fs8
+ fmov fs0,fs9
+ fmov fs0,fs10
+ fmov fs0,fs11
+ fmov fs0,fs12
+ fmov fs0,fs13
+ fmov fs0,fs14
+ fmov fs0,fs15
+ fmov fs0,fs16
+ fmov fs0,fs17
+ fmov fs0,fs18
+ fmov fs0,fs19
+ fmov fs0,fs20
+ fmov fs0,fs21
+ fmov fs0,fs22
+ fmov fs0,fs23
+ fmov fs0,fs24
+ fmov fs0,fs25
+ fmov fs0,fs26
+ fmov fs0,fs27
+ fmov fs0,fs28
+ fmov fs0,fs29
+ fmov fs0,fs30
+ fmov fs0,fs31
+ fmov FPCR_INIT,fpcr
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+ nop
+#endif
+ mov d0,epsw
+ ret [],0
+
+ .size fpu_init_state,.-fpu_init_state
+
+###############################################################################
+#
+# void fpu_save(struct fpu_state_struct *)
+# - save the fpu state
+# - note that an FPU Operational exception might occur during this process
+#
+###############################################################################
+ .globl fpu_save
+ .type fpu_save,@function
+fpu_save:
+ mov epsw,d1
+ or EPSW_FE,epsw /* enable the FPU so we can access it */
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+#endif
+ mov d0,a0
+ fmov fs0,(a0+)
+ fmov fs1,(a0+)
+ fmov fs2,(a0+)
+ fmov fs3,(a0+)
+ fmov fs4,(a0+)
+ fmov fs5,(a0+)
+ fmov fs6,(a0+)
+ fmov fs7,(a0+)
+ fmov fs8,(a0+)
+ fmov fs9,(a0+)
+ fmov fs10,(a0+)
+ fmov fs11,(a0+)
+ fmov fs12,(a0+)
+ fmov fs13,(a0+)
+ fmov fs14,(a0+)
+ fmov fs15,(a0+)
+ fmov fs16,(a0+)
+ fmov fs17,(a0+)
+ fmov fs18,(a0+)
+ fmov fs19,(a0+)
+ fmov fs20,(a0+)
+ fmov fs21,(a0+)
+ fmov fs22,(a0+)
+ fmov fs23,(a0+)
+ fmov fs24,(a0+)
+ fmov fs25,(a0+)
+ fmov fs26,(a0+)
+ fmov fs27,(a0+)
+ fmov fs28,(a0+)
+ fmov fs29,(a0+)
+ fmov fs30,(a0+)
+ fmov fs31,(a0+)
+ fmov fpcr,d0
+ mov d0,(a0)
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+#endif
+
+ mov d1,epsw
+ ret [],0
+
+ .size fpu_save,.-fpu_save
+
+###############################################################################
+#
+# void fpu_restore(struct fpu_state_struct *)
+# - restore the fpu state
+# - note that an FPU Operational exception might occur during this process
+#
+###############################################################################
+ .globl fpu_restore
+ .type fpu_restore,@function
+fpu_restore:
+ mov epsw,d1
+ or EPSW_FE,epsw /* enable the FPU so we can access it */
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+#endif
+ mov d0,a0
+ fmov (a0+),fs0
+ fmov (a0+),fs1
+ fmov (a0+),fs2
+ fmov (a0+),fs3
+ fmov (a0+),fs4
+ fmov (a0+),fs5
+ fmov (a0+),fs6
+ fmov (a0+),fs7
+ fmov (a0+),fs8
+ fmov (a0+),fs9
+ fmov (a0+),fs10
+ fmov (a0+),fs11
+ fmov (a0+),fs12
+ fmov (a0+),fs13
+ fmov (a0+),fs14
+ fmov (a0+),fs15
+ fmov (a0+),fs16
+ fmov (a0+),fs17
+ fmov (a0+),fs18
+ fmov (a0+),fs19
+ fmov (a0+),fs20
+ fmov (a0+),fs21
+ fmov (a0+),fs22
+ fmov (a0+),fs23
+ fmov (a0+),fs24
+ fmov (a0+),fs25
+ fmov (a0+),fs26
+ fmov (a0+),fs27
+ fmov (a0+),fs28
+ fmov (a0+),fs29
+ fmov (a0+),fs30
+ fmov (a0+),fs31
+ mov (a0),d0
+ fmov d0,fpcr
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+ nop
+#endif
+
+ mov d1,epsw
+ ret [],0
+
+ .size fpu_restore,.-fpu_restore
diff --git a/arch/mn10300/kernel/fpu.c b/arch/mn10300/kernel/fpu.c
new file mode 100644
index 0000000..e705f25
--- /dev/null
+++ b/arch/mn10300/kernel/fpu.c
@@ -0,0 +1,223 @@
+/* MN10300 FPU management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/uaccess.h>
+#include <asm/fpu.h>
+#include <asm/elf.h>
+#include <asm/exceptions.h>
+
+struct task_struct *fpu_state_owner;
+
+/*
+ * handle an exception due to the FPU being disabled
+ */
+asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code)
+{
+ struct task_struct *tsk = current;
+
+ if (!user_mode(regs))
+ die_if_no_fixup("An FPU Disabled exception happened in"
+ " kernel space\n",
+ regs, code);
+
+#ifdef CONFIG_FPU
+ preempt_disable();
+
+ /* transfer the last process's FPU state to memory */
+ if (fpu_state_owner) {
+ fpu_save(&fpu_state_owner->thread.fpu_state);
+ fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+ }
+
+ /* the current process now owns the FPU state */
+ fpu_state_owner = tsk;
+ regs->epsw |= EPSW_FE;
+
+ /* load the FPU with the current process's FPU state or invent a new
+ * clean one if the process doesn't have one */
+ if (is_using_fpu(tsk)) {
+ fpu_restore(&tsk->thread.fpu_state);
+ } else {
+ fpu_init_state();
+ set_using_fpu(tsk);
+ }
+
+ preempt_enable();
+#else
+ {
+ siginfo_t info;
+
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_addr = (void *) tsk->thread.uregs->pc;
+ info.si_code = FPE_FLTINV;
+
+ force_sig_info(SIGFPE, &info, tsk);
+ }
+#endif /* CONFIG_FPU */
+}
+
+/*
+ * handle an FPU operational exception
+ * - there's a possibility that if the FPU is asynchronous, the signal might
+ * be meant for a process other than the current one
+ */
+asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code)
+{
+ struct task_struct *tsk = fpu_state_owner;
+ siginfo_t info;
+
+ if (!user_mode(regs))
+ die_if_no_fixup("An FPU Operation exception happened in"
+ " kernel space\n",
+ regs, code);
+
+ if (!tsk)
+ die_if_no_fixup("An FPU Operation exception happened,"
+ " but the FPU is not in use",
+ regs, code);
+
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_addr = (void *) tsk->thread.uregs->pc;
+ info.si_code = FPE_FLTINV;
+
+#ifdef CONFIG_FPU
+ {
+ u32 fpcr;
+
+ /* get FPCR (we need to enable the FPU whilst we do this) */
+ asm volatile(" or %1,epsw \n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ " nop \n"
+ " nop \n"
+ " nop \n"
+#endif
+ " fmov fpcr,%0 \n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ " nop \n"
+ " nop \n"
+ " nop \n"
+#endif
+ " and %2,epsw \n"
+ : "=&d"(fpcr)
+ : "i"(EPSW_FE), "i"(~EPSW_FE)
+ );
+
+ if (fpcr & FPCR_EC_Z)
+ info.si_code = FPE_FLTDIV;
+ else if (fpcr & FPCR_EC_O)
+ info.si_code = FPE_FLTOVF;
+ else if (fpcr & FPCR_EC_U)
+ info.si_code = FPE_FLTUND;
+ else if (fpcr & FPCR_EC_I)
+ info.si_code = FPE_FLTRES;
+ }
+#endif
+
+ force_sig_info(SIGFPE, &info, tsk);
+}
+
+/*
+ * save the FPU state to a signal context
+ */
+int fpu_setup_sigcontext(struct fpucontext *fpucontext)
+{
+#ifdef CONFIG_FPU
+ struct task_struct *tsk = current;
+
+ if (!is_using_fpu(tsk))
+ return 0;
+
+ /* transfer the current FPU state to memory and cause fpu_init() to be
+ * triggered by the next attempted FPU operation by the current
+ * process.
+ */
+ preempt_disable();
+
+ if (fpu_state_owner == tsk) {
+ fpu_save(&tsk->thread.fpu_state);
+ fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+ fpu_state_owner = NULL;
+ }
+
+ preempt_enable();
+
+ /* we no longer have a valid current FPU state */
+ clear_using_fpu(tsk);
+
+ /* transfer the saved FPU state onto the userspace stack */
+ if (copy_to_user(fpucontext,
+ &tsk->thread.fpu_state,
+ min(sizeof(struct fpu_state_struct),
+ sizeof(struct fpucontext))))
+ return -1;
+
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+/*
+ * kill a process's FPU state during restoration after signal handling
+ */
+void fpu_kill_state(struct task_struct *tsk)
+{
+#ifdef CONFIG_FPU
+ /* disown anything left in the FPU */
+ preempt_disable();
+
+ if (fpu_state_owner == tsk) {
+ fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+ fpu_state_owner = NULL;
+ }
+
+ preempt_enable();
+#endif
+ /* we no longer have a valid current FPU state */
+ clear_using_fpu(tsk);
+}
+
+/*
+ * restore the FPU state from a signal context
+ */
+int fpu_restore_sigcontext(struct fpucontext *fpucontext)
+{
+ struct task_struct *tsk = current;
+ int ret;
+
+ /* load up the old FPU state */
+ ret = copy_from_user(&tsk->thread.fpu_state,
+ fpucontext,
+ min(sizeof(struct fpu_state_struct),
+ sizeof(struct fpucontext)));
+ if (!ret)
+ set_using_fpu(tsk);
+
+ return ret;
+}
+
+/*
+ * fill in the FPU structure for a core dump
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg)
+{
+ struct task_struct *tsk = current;
+ int fpvalid;
+
+ fpvalid = is_using_fpu(tsk);
+ if (fpvalid) {
+ unlazy_fpu(tsk);
+ memcpy(fpreg, &tsk->thread.fpu_state, sizeof(*fpreg));
+ }
+
+ return fpvalid;
+}
diff --git a/arch/mn10300/kernel/gdb-cache.S b/arch/mn10300/kernel/gdb-cache.S
new file mode 100644
index 0000000..1108bad
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-cache.S
@@ -0,0 +1,105 @@
+###############################################################################
+#
+# MN10300 Low-level cache purging routines for gdbstub
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cache.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#include <asm/frame.inc>
+#include <asm/serial-regs.h>
+
+ .text
+
+###############################################################################
+#
+# GDB stub cache purge
+#
+###############################################################################
+ .type gdbstub_purge_cache,@function
+ENTRY(gdbstub_purge_cache)
+ #######################################################################
+ # read the addresses tagged in the cache's tag RAM and attempt to flush
+ # those addresses specifically
+ # - we rely on the hardware to filter out invalid tag entry addresses
+ mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_loop:
+ mov (a0),d0
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
+ # cache
+ mov d0,(a1) # conditional purge
+
+mn10300_dcache_flush_skip:
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_loop
+
+;; # unconditionally flush and invalidate the dcache
+;; mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+;; mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of
+;; # entries
+;;
+;; gdbstub_purge_cache__dcache_loop:
+;; mov (a1),d0 # unconditional purge
+;;
+;; add L1_CACHE_BYTES,a1
+;; add -1,d1
+;; bne gdbstub_purge_cache__dcache_loop
+
+ #######################################################################
+ # now invalidate the icache
+ mov CHCTR,a0
+ movhu (a0),a1
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the icache
+ and ~CHCTR_ICEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_ICINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # and reenable it
+ movhu a1,(a0)
+ movhu (a0),d0 # read back to flush
+ # (SIGILLs all over without this)
+
+ mov d1,epsw
+
+ ret [],0
+
+ .size gdbstub_purge_cache,.-gdbstub_purge_cache
diff --git a/arch/mn10300/kernel/gdb-io-serial-low.S b/arch/mn10300/kernel/gdb-io-serial-low.S
new file mode 100644
index 0000000..c68dcd0
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-io-serial-low.S
@@ -0,0 +1,90 @@
+###############################################################################
+#
+# 16550 serial Rx interrupt handler for gdbstub I/O
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cpu-regs.h>
+#include <asm/thread_info.h>
+#include <asm/frame.inc>
+#include <asm/intctl-regs.h>
+#include <asm/unit/serial.h>
+
+ .text
+
+###############################################################################
+#
+# GDB stub serial receive interrupt entry point
+# - intended to run at interrupt priority 0
+#
+###############################################################################
+ .globl gdbstub_io_rx_handler
+ .type gdbstub_io_rx_handler,@function
+gdbstub_io_rx_handler:
+ movm [d2,d3,a2,a3],(sp)
+
+#if 1
+ movbu (GDBPORT_SERIAL_IIR),d2
+#endif
+
+ mov (gdbstub_rx_inp),a3
+gdbstub_io_rx_more:
+ mov a3,a2
+ add 2,a3
+ and 0x00000fff,a3
+ mov (gdbstub_rx_outp),d3
+ cmp a3,d3
+ beq gdbstub_io_rx_overflow
+
+ movbu (GDBPORT_SERIAL_LSR),d3
+ btst UART_LSR_DR,d3
+ beq gdbstub_io_rx_done
+ movbu (GDBPORT_SERIAL_RX),d2
+ movbu d3,(gdbstub_rx_buffer+1,a2)
+ movbu d2,(gdbstub_rx_buffer,a2)
+ mov a3,(gdbstub_rx_inp)
+ bra gdbstub_io_rx_more
+
+gdbstub_io_rx_done:
+ mov GxICR_DETECT,d2
+ movbu d2,(XIRQxICR(GDBPORT_SERIAL_IRQ)) # ACK the interrupt
+ movhu (XIRQxICR(GDBPORT_SERIAL_IRQ)),d2 # flush
+ movm (sp),[d2,d3,a2,a3]
+ bset 0x01,(gdbstub_busy)
+ beq gdbstub_io_rx_enter
+ rti
+
+gdbstub_io_rx_overflow:
+ bset 0x01,(gdbstub_rx_overflow)
+ bra gdbstub_io_rx_done
+
+gdbstub_io_rx_enter:
+ or EPSW_IE|EPSW_IM_1,epsw
+ add -4,sp
+ SAVE_ALL
+
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+ mov 0x280,d1
+
+ mov fp,d0
+ call gdbstub_rx_irq[],0 # gdbstub_rx_irq(regs,excep)
+
+ and ~EPSW_IE,epsw
+ bclr 0x01,(gdbstub_busy)
+
+ .globl gdbstub_return
+gdbstub_return:
+ RESTORE_ALL
+
+ .size gdbstub_io_rx_handler,.-gdbstub_io_rx_handler
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
new file mode 100644
index 0000000..9a6d4e8
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -0,0 +1,155 @@
+/* 16550 serial driver for gdbstub I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/nmi.h>
+
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/serial-regs.h>
+#include <asm/unit/serial.h>
+
+/*
+ * initialise the GDB stub
+ */
+void gdbstub_io_init(void)
+{
+ u16 tmp;
+
+ /* set up the serial port */
+ GDBPORT_SERIAL_LCR = UART_LCR_WLEN8; /* 1N8 */
+ GDBPORT_SERIAL_FCR = (UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+
+ FLOWCTL_CLEAR(DTR);
+ FLOWCTL_SET(RTS);
+
+ gdbstub_io_set_baud(115200);
+
+ /* we want to get serial receive interrupts */
+ XIRQxICR(GDBPORT_SERIAL_IRQ) = 0;
+ tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
+
+ IVAR0 = EXCEP_IRQ_LEVEL0;
+ set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
+
+ XIRQxICR(GDBPORT_SERIAL_IRQ) &= ~GxICR_REQUEST;
+ XIRQxICR(GDBPORT_SERIAL_IRQ) = GxICR_ENABLE | GxICR_LEVEL_0;
+ tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
+
+ GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
+
+ /* permit level 0 IRQs to take place */
+ asm volatile(
+ " and %0,epsw \n"
+ " or %1,epsw \n"
+ :
+ : "i"(~EPSW_IM), "i"(EPSW_IE | EPSW_IM_1)
+ );
+}
+
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_io_set_baud(unsigned baud)
+{
+ unsigned value;
+ u8 lcr;
+
+ value = 18432000 / 16 / baud;
+
+ lcr = GDBPORT_SERIAL_LCR;
+ GDBPORT_SERIAL_LCR |= UART_LCR_DLAB;
+ GDBPORT_SERIAL_DLL = value & 0xff;
+ GDBPORT_SERIAL_DLM = (value >> 8) & 0xff;
+ GDBPORT_SERIAL_LCR = lcr;
+}
+
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
+{
+ unsigned ix;
+ u8 ch, st;
+
+ *_ch = 0xff;
+
+ if (gdbstub_rx_unget) {
+ *_ch = gdbstub_rx_unget;
+ gdbstub_rx_unget = 0;
+ return 0;
+ }
+
+ try_again:
+ /* pull chars out of the buffer */
+ ix = gdbstub_rx_outp;
+ if (ix == gdbstub_rx_inp) {
+ if (nonblock)
+ return -EAGAIN;
+#ifdef CONFIG_MN10300_WD_TIMER
+ watchdog_alert_counter = 0;
+#endif /* CONFIG_MN10300_WD_TIMER */
+ goto try_again;
+ }
+
+ ch = gdbstub_rx_buffer[ix++];
+ st = gdbstub_rx_buffer[ix++];
+ gdbstub_rx_outp = ix & 0x00000fff;
+
+ if (st & UART_LSR_BI) {
+ gdbstub_proto("### GDB Rx Break Detected ###\n");
+ return -EINTR;
+ } else if (st & (UART_LSR_FE | UART_LSR_OE | UART_LSR_PE)) {
+ gdbstub_proto("### GDB Rx Error (st=%02x) ###\n", st);
+ return -EIO;
+ } else {
+ gdbstub_proto("### GDB Rx %02x (st=%02x) ###\n", ch, st);
+ *_ch = ch & 0x7f;
+ return 0;
+ }
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_char(unsigned char ch)
+{
+ FLOWCTL_SET(DTR);
+ LSR_WAIT_FOR(THRE);
+ /* FLOWCTL_WAIT_FOR(CTS); */
+
+ if (ch == 0x0a) {
+ GDBPORT_SERIAL_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ /* FLOWCTL_WAIT_FOR(CTS); */
+ }
+ GDBPORT_SERIAL_TX = ch;
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_flush(void)
+{
+ LSR_WAIT_FOR(TEMT);
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_CLEAR(DTR);
+}
diff --git a/arch/mn10300/kernel/gdb-io-ttysm-low.S b/arch/mn10300/kernel/gdb-io-ttysm-low.S
new file mode 100644
index 0000000..677c787
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-io-ttysm-low.S
@@ -0,0 +1,93 @@
+###############################################################################
+#
+# MN10300 On-chip serial Rx interrupt handler for GDB stub I/O
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/thread_info.h>
+#include <asm/cpu-regs.h>
+#include <asm/frame.inc>
+#include <asm/intctl-regs.h>
+#include <asm/unit/serial.h>
+#include "mn10300-serial.h"
+
+ .text
+
+###############################################################################
+#
+# GDB stub serial receive interrupt entry point
+# - intended to run at interrupt priority 0
+#
+###############################################################################
+ .globl gdbstub_io_rx_handler
+ .type gdbstub_io_rx_handler,@function
+gdbstub_io_rx_handler:
+ movm [d2,d3,a2,a3],(sp)
+
+ mov (gdbstub_rx_inp),a3
+gdbstub_io_rx_more:
+ mov a3,a2
+ add 2,a3
+ and PAGE_SIZE_asm-1,a3
+ mov (gdbstub_rx_outp),d3
+ cmp a3,d3
+ beq gdbstub_io_rx_overflow
+
+ movbu (SCgSTR),d3
+ btst SC01STR_RBF,d3
+ beq gdbstub_io_rx_done
+ movbu (SCgRXB),d2
+ movbu d3,(gdbstub_rx_buffer+1,a2)
+ movbu d2,(gdbstub_rx_buffer,a2)
+ mov a3,(gdbstub_rx_inp)
+ bra gdbstub_io_rx_more
+
+gdbstub_io_rx_done:
+ mov GxICR_DETECT,d2
+ movbu d2,(GxICR(SCgRXIRQ)) # ACK the interrupt
+ movhu (GxICR(SCgRXIRQ)),d2 # flush
+
+ movm (sp),[d2,d3,a2,a3]
+ bset 0x01,(gdbstub_busy)
+ beq gdbstub_io_rx_enter
+ rti
+
+gdbstub_io_rx_overflow:
+ bset 0x01,(gdbstub_rx_overflow)
+ bra gdbstub_io_rx_done
+
+###############################################################################
+#
+# debugging interrupt - enter the GDB stub proper
+#
+###############################################################################
+gdbstub_io_rx_enter:
+ or EPSW_IE|EPSW_IM_1,epsw
+ add -4,sp
+ SAVE_ALL
+
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+ mov 0x280,d1
+
+ mov fp,d0
+ call gdbstub_rx_irq[],0 # gdbstub_io_rx_irq(regs,excep)
+
+ and ~EPSW_IE,epsw
+ bclr 0x01,(gdbstub_busy)
+
+ .globl gdbstub_return
+gdbstub_return:
+ RESTORE_ALL
+
+ .size gdbstub_io_rx_handler,.-gdbstub_io_rx_handler
diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
new file mode 100644
index 0000000..c545159
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-io-ttysm.c
@@ -0,0 +1,299 @@
+/* MN10300 On-chip serial driver for gdbstub I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/unit/clock.h>
+#include "mn10300-serial.h"
+
+#if defined(CONFIG_GDBSTUB_ON_TTYSM0)
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif0;
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM1)
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif1;
+#else
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif2;
+#endif
+
+
+/*
+ * initialise the GDB stub I/O routines
+ */
+void __init gdbstub_io_init(void)
+{
+ uint16_t scxctr;
+ int tmp;
+
+ switch (gdbstub_port->clock_src) {
+ case MNSCx_CLOCK_SRC_IOCLK:
+ gdbstub_port->ioclk = MN10300_IOCLK;
+ break;
+
+#ifdef MN10300_IOBCLK
+ case MNSCx_CLOCK_SRC_IOBCLK:
+ gdbstub_port->ioclk = MN10300_IOBCLK;
+ break;
+#endif
+ default:
+ BUG();
+ }
+
+ /* set up the serial port */
+ gdbstub_io_set_baud(115200);
+
+ /* we want to get serial receive interrupts */
+ set_intr_level(gdbstub_port->rx_irq, GxICR_LEVEL_0);
+ set_intr_level(gdbstub_port->tx_irq, GxICR_LEVEL_0);
+ set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
+
+ *gdbstub_port->rx_icr |= GxICR_ENABLE;
+ tmp = *gdbstub_port->rx_icr;
+
+ /* enable the device */
+ scxctr = SC01CTR_CLN_8BIT; /* 1N8 */
+ switch (gdbstub_port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ scxctr |= SC0CTR_CK_TM8UFLOW_8; /* == SC1CTR_CK_TM9UFLOW_8
+ == SC2CTR_CK_TM10UFLOW_8 */
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ scxctr |= SC0CTR_CK_TM2UFLOW_8;
+ break;
+ }
+
+ scxctr |= SC01CTR_TXE | SC01CTR_RXE;
+
+ *gdbstub_port->_control = scxctr;
+ tmp = *gdbstub_port->_control;
+
+ /* permit level 0 IRQs only */
+ asm volatile(
+ " and %0,epsw \n"
+ " or %1,epsw \n"
+ :
+ : "i"(~EPSW_IM), "i"(EPSW_IE|EPSW_IM_1)
+ );
+}
+
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_io_set_baud(unsigned baud)
+{
+ const unsigned bits = 10; /* 1 [start] + 8 [data] + 0 [parity] +
+ * 1 [stop] */
+ unsigned long ioclk = gdbstub_port->ioclk;
+ unsigned xdiv, tmp;
+ uint16_t tmxbr;
+ uint8_t tmxmd;
+
+ if (!baud) {
+ baud = 9600;
+ } else if (baud == 134) {
+ baud = 269; /* 134 is really 134.5 */
+ xdiv = 2;
+ }
+
+try_alternative:
+ xdiv = 1;
+
+ switch (gdbstub_port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ tmxmd = TM8MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ tmxmd = TM8MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ tmxmd = TM2MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ tmxmd = TM2MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+ break;
+ }
+
+ /* as a last resort, if the quotient is zero, default to 9600 bps */
+ baud = 9600;
+ goto try_alternative;
+
+timer_okay:
+ gdbstub_port->uart.timeout = (2 * bits * HZ) / baud;
+ gdbstub_port->uart.timeout += HZ / 50;
+
+ /* set the timer to produce the required baud rate */
+ switch (gdbstub_port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ *gdbstub_port->_tmxmd = 0;
+ *gdbstub_port->_tmxbr = tmxbr;
+ *gdbstub_port->_tmxmd = TM8MD_INIT_COUNTER;
+ *gdbstub_port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ *gdbstub_port->_tmxmd = 0;
+ *(volatile u8 *) gdbstub_port->_tmxbr = (u8)tmxbr;
+ *gdbstub_port->_tmxmd = TM2MD_INIT_COUNTER;
+ *gdbstub_port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+ break;
+ }
+}
+
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
+{
+ unsigned ix;
+ u8 ch, st;
+
+ *_ch = 0xff;
+
+ if (gdbstub_rx_unget) {
+ *_ch = gdbstub_rx_unget;
+ gdbstub_rx_unget = 0;
+ return 0;
+ }
+
+try_again:
+ /* pull chars out of the buffer */
+ ix = gdbstub_rx_outp;
+ if (ix == gdbstub_rx_inp) {
+ if (nonblock)
+ return -EAGAIN;
+#ifdef CONFIG_MN10300_WD_TIMER
+ watchdog_alert_counter = 0;
+#endif /* CONFIG_MN10300_WD_TIMER */
+ goto try_again;
+ }
+
+ ch = gdbstub_rx_buffer[ix++];
+ st = gdbstub_rx_buffer[ix++];
+ gdbstub_rx_outp = ix & (PAGE_SIZE - 1);
+
+ st &= SC01STR_RXF | SC01STR_RBF | SC01STR_FEF | SC01STR_PEF |
+ SC01STR_OEF;
+
+ /* deal with what we've got
+ * - note that the UART doesn't do BREAK-detection for us
+ */
+ if (st & SC01STR_FEF && ch == 0) {
+ switch (gdbstub_port->rx_brk) {
+ case 0: gdbstub_port->rx_brk = 1; goto try_again;
+ case 1: gdbstub_port->rx_brk = 2; goto try_again;
+ case 2:
+ gdbstub_port->rx_brk = 3;
+ gdbstub_proto("### GDB MNSERIAL Rx Break Detected"
+ " ###\n");
+ return -EINTR;
+ default:
+ goto try_again;
+ }
+ } else if (st & SC01STR_FEF) {
+ if (gdbstub_port->rx_brk)
+ goto try_again;
+
+ gdbstub_proto("### GDB MNSERIAL Framing Error ###\n");
+ return -EIO;
+ } else if (st & SC01STR_OEF) {
+ if (gdbstub_port->rx_brk)
+ goto try_again;
+
+ gdbstub_proto("### GDB MNSERIAL Overrun Error ###\n");
+ return -EIO;
+ } else if (st & SC01STR_PEF) {
+ if (gdbstub_port->rx_brk)
+ goto try_again;
+
+ gdbstub_proto("### GDB MNSERIAL Parity Error ###\n");
+ return -EIO;
+ } else {
+ /* look for the tail-end char on a break run */
+ if (gdbstub_port->rx_brk == 3) {
+ switch (ch) {
+ case 0xFF:
+ case 0xFE:
+ case 0xFC:
+ case 0xF8:
+ case 0xF0:
+ case 0xE0:
+ case 0xC0:
+ case 0x80:
+ case 0x00:
+ gdbstub_port->rx_brk = 0;
+ goto try_again;
+ default:
+ break;
+ }
+ }
+
+ gdbstub_port->rx_brk = 0;
+ gdbstub_io("### GDB Rx %02x (st=%02x) ###\n", ch, st);
+ *_ch = ch & 0x7f;
+ return 0;
+ }
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_char(unsigned char ch)
+{
+ while (*gdbstub_port->_status & SC01STR_TBF)
+ continue;
+
+ if (ch == 0x0a) {
+ *(u8 *) gdbstub_port->_txb = 0x0d;
+ while (*gdbstub_port->_status & SC01STR_TBF)
+ continue;
+ }
+
+ *(u8 *) gdbstub_port->_txb = ch;
+}
+
+/*
+ * flush the transmission buffers
+ */
+void gdbstub_io_tx_flush(void)
+{
+ while (*gdbstub_port->_status & (SC01STR_TBF | SC01STR_TXF))
+ continue;
+}
diff --git a/arch/mn10300/kernel/gdb-low.S b/arch/mn10300/kernel/gdb-low.S
new file mode 100644
index 0000000..e2725552
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-low.S
@@ -0,0 +1,115 @@
+###############################################################################
+#
+# MN10300 Low-level gdbstub routines
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cache.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#include <asm/frame.inc>
+#include <asm/serial-regs.h>
+
+ .text
+
+###############################################################################
+#
+# GDB stub read memory with guard
+# - D0 holds the memory address to read
+# - D1 holds the address to store the byte into
+#
+###############################################################################
+ .globl gdbstub_read_byte_guard
+ .globl gdbstub_read_byte_cont
+ENTRY(gdbstub_read_byte)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_read_byte_guard:
+ movbu (a0),d1
+gdbstub_read_byte_cont:
+ movbu d1,(a1)
+ ret [],0
+
+ .globl gdbstub_read_word_guard
+ .globl gdbstub_read_word_cont
+ENTRY(gdbstub_read_word)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_read_word_guard:
+ movhu (a0),d1
+gdbstub_read_word_cont:
+ movhu d1,(a1)
+ ret [],0
+
+ .globl gdbstub_read_dword_guard
+ .globl gdbstub_read_dword_cont
+ENTRY(gdbstub_read_dword)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_read_dword_guard:
+ mov (a0),d1
+gdbstub_read_dword_cont:
+ mov d1,(a1)
+ ret [],0
+
+###############################################################################
+#
+# GDB stub write memory with guard
+# - D0 holds the byte to store
+# - D1 holds the memory address to write
+#
+###############################################################################
+ .globl gdbstub_write_byte_guard
+ .globl gdbstub_write_byte_cont
+ENTRY(gdbstub_write_byte)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_write_byte_guard:
+ movbu a0,(a1)
+gdbstub_write_byte_cont:
+ ret [],0
+
+ .globl gdbstub_write_word_guard
+ .globl gdbstub_write_word_cont
+ENTRY(gdbstub_write_word)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_write_word_guard:
+ movhu a0,(a1)
+gdbstub_write_word_cont:
+ ret [],0
+
+ .globl gdbstub_write_dword_guard
+ .globl gdbstub_write_dword_cont
+ENTRY(gdbstub_write_dword)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_write_dword_guard:
+ mov a0,(a1)
+gdbstub_write_dword_cont:
+ ret [],0
+
+###############################################################################
+#
+# GDB stub BUG() trap
+#
+###############################################################################
+ENTRY(__gdbstub_bug_trap)
+ .byte 0xF7,0xF7 # don't use 0xFF as the JTAG unit preempts that
+ ret [],0
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
new file mode 100644
index 0000000..21891c7
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -0,0 +1,1947 @@
+/* MN10300 GDB stub
+ *
+ * Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ * Contributed by HP Systems
+ *
+ * Modified for SPARC by Stu Grossman, Cygnus Support.
+ *
+ * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ * Copyright (C) 1995 Andreas Busse
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified for Linux/mn10300 by David Howells <dhowells@redhat.com>
+ */
+
+/*
+ * To enable debugger support, two things need to happen. One, a
+ * call to set_debug_traps() is necessary in order to allow any breakpoints
+ * or error conditions to be properly intercepted and reported to gdb.
+ * Two, a breakpoint needs to be generated to begin communication. This
+ * is most easily accomplished by a call to breakpoint(). Breakpoint()
+ * simulates a breakpoint by executing a BREAK instruction.
+ *
+ *
+ * The following gdb commands are supported:
+ *
+ * command function Return value
+ *
+ * g return the value of the CPU registers hex data or ENN
+ * G set the value of the CPU registers OK or ENN
+ *
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
+ *
+ * c Resume at current address SNN ( signal NN)
+ * cAA..AA Continue at address AA..AA SNN
+ *
+ * s Step one instruction SNN
+ * sAA..AA Step one instruction from AA..AA SNN
+ *
+ * k kill
+ *
+ * ? What was the last sigval ? SNN (signal NN)
+ *
+ * bBB..BB Set baud rate to BB..BB OK or BNN, then sets
+ * baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum. A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer. '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host: Reply:
+ * $m0,10#2a +$00010203040506070809101112131415#42
+ *
+ *
+ * ==============
+ * MORE EXAMPLES:
+ * ==============
+ *
+ * For reference -- the following are the steps that one
+ * company took (RidgeRun Inc) to get remote gdb debugging
+ * going. In this scenario the host machine was a PC and the
+ * target platform was a Galileo EVB64120A MIPS evaluation
+ * board.
+ *
+ * Step 1:
+ * First download gdb-5.0.tar.gz from the internet.
+ * and then build/install the package.
+ *
+ * Example:
+ * $ tar zxf gdb-5.0.tar.gz
+ * $ cd gdb-5.0
+ * $ ./configure --target=am33_2.0-linux-gnu
+ * $ make
+ * $ install
+ * am33_2.0-linux-gnu-gdb
+ *
+ * Step 2:
+ * Configure linux for remote debugging and build it.
+ *
+ * Example:
+ * $ cd ~/linux
+ * $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
+ * $ make dep; make vmlinux
+ *
+ * Step 3:
+ * Download the kernel to the remote target and start
+ * the kernel running. It will promptly halt and wait
+ * for the host gdb session to connect. It does this
+ * since the "Kernel Hacking" option has defined
+ * CONFIG_REMOTE_DEBUG which in turn enables your calls
+ * to:
+ * set_debug_traps();
+ * breakpoint();
+ *
+ * Step 4:
+ * Start the gdb session on the host.
+ *
+ * Example:
+ * $ am33_2.0-linux-gnu-gdb vmlinux
+ * (gdb) set remotebaud 115200
+ * (gdb) target remote /dev/ttyS1
+ * ...at this point you are connected to
+ * the remote target and can use gdb
+ * in the normal fasion. Setting
+ * breakpoints, single stepping,
+ * printing variables, etc.
+ *
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/bug.h>
+
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/cacheflush.h>
+#include <asm/serial-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/unit/serial.h>
+
+/* define to use F7F7 rather than FF which is subverted by JTAG debugger */
+#undef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers
+ * at least NUMREGBYTES*2 are needed for register packets
+ */
+#define BUFMAX 2048
+
+static const char gdbstub_banner[] =
+ "Linux/MN10300 GDB Stub (c) RedHat 2007\n";
+
+u8 gdbstub_rx_buffer[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+u32 gdbstub_rx_inp;
+u32 gdbstub_rx_outp;
+u8 gdbstub_busy;
+u8 gdbstub_rx_overflow;
+u8 gdbstub_rx_unget;
+
+static u8 gdbstub_flush_caches;
+static char input_buffer[BUFMAX];
+static char output_buffer[BUFMAX];
+static char trans_buffer[BUFMAX];
+
+static const char hexchars[] = "0123456789abcdef";
+
+struct gdbstub_bkpt {
+ u8 *addr; /* address of breakpoint */
+ u8 len; /* size of breakpoint */
+ u8 origbytes[7]; /* original bytes */
+};
+
+static struct gdbstub_bkpt gdbstub_bkpts[256];
+
+/*
+ * local prototypes
+ */
+static void getpacket(char *buffer);
+static int putpacket(char *buffer);
+static int computeSignal(enum exception_code excep);
+static int hex(unsigned char ch);
+static int hexToInt(char **ptr, int *intValue);
+static unsigned char *mem2hex(const void *mem, char *buf, int count,
+ int may_fault);
+static const char *hex2mem(const char *buf, void *_mem, int count,
+ int may_fault);
+
+/*
+ * Convert ch from a hex digit to an int
+ */
+static int hex(unsigned char ch)
+{
+ if (ch >= 'a' && ch <= 'f')
+ return ch - 'a' + 10;
+ if (ch >= '0' && ch <= '9')
+ return ch - '0';
+ if (ch >= 'A' && ch <= 'F')
+ return ch - 'A' + 10;
+ return -1;
+}
+
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+
+void debug_to_serial(const char *p, int n)
+{
+ __debug_to_serial(p, n);
+ /* gdbstub_console_write(NULL, p, n); */
+}
+
+void gdbstub_printk(const char *fmt, ...)
+{
+ va_list args;
+ int len;
+
+ /* Emit the output into the temporary buffer */
+ va_start(args, fmt);
+ len = vsnprintf(trans_buffer, sizeof(trans_buffer), fmt, args);
+ va_end(args);
+ debug_to_serial(trans_buffer, len);
+}
+
+#endif
+
+static inline char *gdbstub_strcpy(char *dst, const char *src)
+{
+ int loop = 0;
+ while ((dst[loop] = src[loop]))
+ loop++;
+ return dst;
+}
+
+/*
+ * scan for the sequence $<data>#<checksum>
+ */
+static void getpacket(char *buffer)
+{
+ unsigned char checksum;
+ unsigned char xmitcsum;
+ unsigned char ch;
+ int count, i, ret, error;
+
+ for (;;) {
+ /*
+ * wait around for the start character,
+ * ignore all other characters
+ */
+ do {
+ gdbstub_io_rx_char(&ch, 0);
+ } while (ch != '$');
+
+ checksum = 0;
+ xmitcsum = -1;
+ count = 0;
+ error = 0;
+
+ /*
+ * now, read until a # or end of buffer is found
+ */
+ while (count < BUFMAX) {
+ ret = gdbstub_io_rx_char(&ch, 0);
+ if (ret < 0)
+ error = ret;
+
+ if (ch == '#')
+ break;
+ checksum += ch;
+ buffer[count] = ch;
+ count++;
+ }
+
+ if (error == -EIO) {
+ gdbstub_proto("### GDB Rx Error - Skipping packet"
+ " ###\n");
+ gdbstub_proto("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-');
+ continue;
+ }
+
+ if (count >= BUFMAX || error)
+ continue;
+
+ buffer[count] = 0;
+
+ /* read the checksum */
+ ret = gdbstub_io_rx_char(&ch, 0);
+ if (ret < 0)
+ error = ret;
+ xmitcsum = hex(ch) << 4;
+
+ ret = gdbstub_io_rx_char(&ch, 0);
+ if (ret < 0)
+ error = ret;
+ xmitcsum |= hex(ch);
+
+ if (error) {
+ if (error == -EIO)
+ gdbstub_io("### GDB Rx Error -"
+ " Skipping packet\n");
+ gdbstub_io("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-');
+ continue;
+ }
+
+ /* check the checksum */
+ if (checksum != xmitcsum) {
+ gdbstub_io("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-'); /* failed checksum */
+ continue;
+ }
+
+ gdbstub_proto("### GDB Rx '$%s#%02x' ###\n", buffer, checksum);
+ gdbstub_io("### GDB Tx ACK\n");
+ gdbstub_io_tx_char('+'); /* successful transfer */
+
+ /*
+ * if a sequence char is present,
+ * reply the sequence ID
+ */
+ if (buffer[2] == ':') {
+ gdbstub_io_tx_char(buffer[0]);
+ gdbstub_io_tx_char(buffer[1]);
+
+ /*
+ * remove sequence chars from buffer
+ */
+ count = 0;
+ while (buffer[count])
+ count++;
+ for (i = 3; i <= count; i++)
+ buffer[i - 3] = buffer[i];
+ }
+
+ break;
+ }
+}
+
+/*
+ * send the packet in buffer.
+ * - return 0 if successfully ACK'd
+ * - return 1 if abandoned due to new incoming packet
+ */
+static int putpacket(char *buffer)
+{
+ unsigned char checksum;
+ unsigned char ch;
+ int count;
+
+ /*
+ * $<packet info>#<checksum>.
+ */
+ gdbstub_proto("### GDB Tx $'%s'#?? ###\n", buffer);
+
+ do {
+ gdbstub_io_tx_char('$');
+ checksum = 0;
+ count = 0;
+
+ while ((ch = buffer[count]) != 0) {
+ gdbstub_io_tx_char(ch);
+ checksum += ch;
+ count += 1;
+ }
+
+ gdbstub_io_tx_char('#');
+ gdbstub_io_tx_char(hexchars[checksum >> 4]);
+ gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+
+ } while (gdbstub_io_rx_char(&ch, 0),
+ ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0),
+ ch != '-' && ch != '+' &&
+ (gdbstub_io("### GDB Rx ??? %02x\n", ch), 0),
+ ch != '+' && ch != '$');
+
+ if (ch == '+') {
+ gdbstub_io("### GDB Rx ACK\n");
+ return 0;
+ }
+
+ gdbstub_io("### GDB Tx Abandoned\n");
+ gdbstub_rx_unget = ch;
+ return 1;
+}
+
+/*
+ * While we find nice hex chars, build an int.
+ * Return number of chars processed.
+ */
+static int hexToInt(char **ptr, int *intValue)
+{
+ int numChars = 0;
+ int hexValue;
+
+ *intValue = 0;
+
+ while (**ptr) {
+ hexValue = hex(**ptr);
+ if (hexValue < 0)
+ break;
+
+ *intValue = (*intValue << 4) | hexValue;
+ numChars++;
+
+ (*ptr)++;
+ }
+
+ return (numChars);
+}
+
+/*
+ * We single-step by setting breakpoints. When an exception
+ * is handled, we need to restore the instructions hoisted
+ * when the breakpoints were set.
+ *
+ * This is where we save the original instructions.
+ */
+static struct gdb_bp_save {
+ u8 *addr;
+ u8 opcode[2];
+} step_bp[2];
+
+static const unsigned char gdbstub_insn_sizes[256] =
+{
+ /* 1 2 3 4 5 6 7 8 9 a b c d e f */
+ 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */
+ 2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */
+ 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */
+ 0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1 /* f */
+};
+
+static int __gdbstub_mark_bp(u8 *addr, int ix)
+{
+ if (addr < (u8 *) 0x70000000UL)
+ return 0;
+ /* 70000000-7fffffff: vmalloc area */
+ if (addr < (u8 *) 0x80000000UL)
+ goto okay;
+ if (addr < (u8 *) 0x8c000000UL)
+ return 0;
+ /* 8c000000-93ffffff: SRAM, SDRAM */
+ if (addr < (u8 *) 0x94000000UL)
+ goto okay;
+ return 0;
+
+okay:
+ if (gdbstub_read_byte(addr + 0, &step_bp[ix].opcode[0]) < 0 ||
+ gdbstub_read_byte(addr + 1, &step_bp[ix].opcode[1]) < 0)
+ return 0;
+
+ step_bp[ix].addr = addr;
+ return 1;
+}
+
+static inline void __gdbstub_restore_bp(void)
+{
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ if (step_bp[0].addr) {
+ gdbstub_write_byte(step_bp[0].opcode[0], step_bp[0].addr + 0);
+ gdbstub_write_byte(step_bp[0].opcode[1], step_bp[0].addr + 1);
+ }
+ if (step_bp[1].addr) {
+ gdbstub_write_byte(step_bp[1].opcode[0], step_bp[1].addr + 0);
+ gdbstub_write_byte(step_bp[1].opcode[1], step_bp[1].addr + 1);
+ }
+#else
+ if (step_bp[0].addr)
+ gdbstub_write_byte(step_bp[0].opcode[0], step_bp[0].addr + 0);
+ if (step_bp[1].addr)
+ gdbstub_write_byte(step_bp[1].opcode[0], step_bp[1].addr + 0);
+#endif
+
+ gdbstub_flush_caches = 1;
+
+ step_bp[0].addr = NULL;
+ step_bp[0].opcode[0] = 0;
+ step_bp[0].opcode[1] = 0;
+ step_bp[1].addr = NULL;
+ step_bp[1].opcode[0] = 0;
+ step_bp[1].opcode[1] = 0;
+}
+
+/*
+ * emulate single stepping by means of breakpoint instructions
+ */
+static int gdbstub_single_step(struct pt_regs *regs)
+{
+ unsigned size;
+ uint32_t x;
+ uint8_t cur, *pc, *sp;
+
+ step_bp[0].addr = NULL;
+ step_bp[0].opcode[0] = 0;
+ step_bp[0].opcode[1] = 0;
+ step_bp[1].addr = NULL;
+ step_bp[1].opcode[0] = 0;
+ step_bp[1].opcode[1] = 0;
+ x = 0;
+
+ pc = (u8 *) regs->pc;
+ sp = (u8 *) (regs + 1);
+ if (gdbstub_read_byte(pc, &cur) < 0)
+ return -EFAULT;
+
+ gdbstub_bkpt("Single Step from %p { %02x }\n", pc, cur);
+
+ gdbstub_flush_caches = 1;
+
+ size = gdbstub_insn_sizes[cur];
+ if (size > 0) {
+ if (!__gdbstub_mark_bp(pc + size, 0))
+ goto fault;
+ } else {
+ switch (cur) {
+ /* Bxx (d8,PC) */
+ case 0xc0:
+ case 0xc1:
+ case 0xc2:
+ case 0xc3:
+ case 0xc4:
+ case 0xc5:
+ case 0xc6:
+ case 0xc7:
+ case 0xc8:
+ case 0xc9:
+ case 0xca:
+ if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + 2, 0))
+ goto fault;
+ if ((x < 0 || x > 2) &&
+ !__gdbstub_mark_bp(pc + (s8) x, 1))
+ goto fault;
+ break;
+
+ /* LXX (d8,PC) */
+ case 0xd0:
+ case 0xd1:
+ case 0xd2:
+ case 0xd3:
+ case 0xd4:
+ case 0xd5:
+ case 0xd6:
+ case 0xd7:
+ case 0xd8:
+ case 0xd9:
+ case 0xda:
+ if (!__gdbstub_mark_bp(pc + 1, 0))
+ goto fault;
+ if (regs->pc != regs->lar &&
+ !__gdbstub_mark_bp((u8 *) regs->lar, 1))
+ goto fault;
+ break;
+
+ /* SETLB - loads the next for bytes into the LIR
+ * register */
+ case 0xdb:
+ if (!__gdbstub_mark_bp(pc + 1, 0))
+ goto fault;
+ break;
+
+ /* JMP (d16,PC) or CALL (d16,PC) */
+ case 0xcc:
+ case 0xcd:
+ if (gdbstub_read_byte(pc + 1, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(pc + 2, ((u8 *) &x) + 1) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + (s16) x, 0))
+ goto fault;
+ break;
+
+ /* JMP (d32,PC) or CALL (d32,PC) */
+ case 0xdc:
+ case 0xdd:
+ if (gdbstub_read_byte(pc + 1, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(pc + 2, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(pc + 3, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(pc + 4, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + (s32) x, 0))
+ goto fault;
+ break;
+
+ /* RETF */
+ case 0xde:
+ if (!__gdbstub_mark_bp((u8 *) regs->mdr, 0))
+ goto fault;
+ break;
+
+ /* RET */
+ case 0xdf:
+ if (gdbstub_read_byte(pc + 2, (u8 *) &x) < 0)
+ goto fault;
+ sp += (s8)x;
+ if (gdbstub_read_byte(sp + 0, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(sp + 1, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(sp + 2, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(sp + 3, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ break;
+
+ case 0xf0:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+
+ if (cur >= 0xf0 && cur <= 0xf7) {
+ /* JMP (An) / CALLS (An) */
+ switch (cur & 3) {
+ case 0: x = regs->a0; break;
+ case 1: x = regs->a1; break;
+ case 2: x = regs->a2; break;
+ case 3: x = regs->a3; break;
+ }
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ } else if (cur == 0xfc) {
+ /* RETS */
+ if (gdbstub_read_byte(
+ sp + 0, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ sp + 1, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(
+ sp + 2, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(
+ sp + 3, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ } else if (cur == 0xfd) {
+ /* RTI */
+ if (gdbstub_read_byte(
+ sp + 4, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ sp + 5, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(
+ sp + 6, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(
+ sp + 7, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ } else {
+ if (!__gdbstub_mark_bp(pc + 2, 0))
+ goto fault;
+ }
+
+ break;
+
+ /* potential 3-byte conditional branches */
+ case 0xf8:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + 3, 0))
+ goto fault;
+
+ if (cur >= 0xe8 && cur <= 0xeb) {
+ if (gdbstub_read_byte(
+ pc + 2, ((u8 *) &x) + 0) < 0)
+ goto fault;
+ if ((x < 0 || x > 3) &&
+ !__gdbstub_mark_bp(pc + (s8) x, 1))
+ goto fault;
+ }
+ break;
+
+ case 0xfa:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+
+ if (cur == 0xff) {
+ /* CALLS (d16,PC) */
+ if (gdbstub_read_byte(
+ pc + 2, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ pc + 3, ((u8 *) &x) + 1) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + (s16) x, 0))
+ goto fault;
+ } else {
+ if (!__gdbstub_mark_bp(pc + 4, 0))
+ goto fault;
+ }
+ break;
+
+ case 0xfc:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+ if (cur == 0xff) {
+ /* CALLS (d32,PC) */
+ if (gdbstub_read_byte(
+ pc + 2, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ pc + 3, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(
+ pc + 4, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(
+ pc + 5, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(
+ pc + (s32) x, 0))
+ goto fault;
+ } else {
+ if (!__gdbstub_mark_bp(
+ pc + 6, 0))
+ goto fault;
+ }
+ break;
+
+ }
+ }
+
+ gdbstub_bkpt("Step: %02x at %p; %02x at %p\n",
+ step_bp[0].opcode[0], step_bp[0].addr,
+ step_bp[1].opcode[0], step_bp[1].addr);
+
+ if (step_bp[0].addr) {
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ if (gdbstub_write_byte(0xF7, step_bp[0].addr + 0) < 0 ||
+ gdbstub_write_byte(0xF7, step_bp[0].addr + 1) < 0)
+ goto fault;
+#else
+ if (gdbstub_write_byte(0xFF, step_bp[0].addr + 0) < 0)
+ goto fault;
+#endif
+ }
+
+ if (step_bp[1].addr) {
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ if (gdbstub_write_byte(0xF7, step_bp[1].addr + 0) < 0 ||
+ gdbstub_write_byte(0xF7, step_bp[1].addr + 1) < 0)
+ goto fault;
+#else
+ if (gdbstub_write_byte(0xFF, step_bp[1].addr + 0) < 0)
+ goto fault;
+#endif
+ }
+
+ return 0;
+
+ fault:
+ /* uh-oh - silly address alert, try and restore things */
+ __gdbstub_restore_bp();
+ return -EFAULT;
+}
+
+#ifdef CONFIG_GDBSTUB_CONSOLE
+
+void gdbstub_console_write(struct console *con, const char *p, unsigned n)
+{
+ static const char gdbstub_cr[] = { 0x0d };
+ char outbuf[26];
+ int qty;
+ u8 busy;
+
+ busy = gdbstub_busy;
+ gdbstub_busy = 1;
+
+ outbuf[0] = 'O';
+
+ while (n > 0) {
+ qty = 1;
+
+ while (n > 0 && qty < 20) {
+ mem2hex(p, outbuf + qty, 2, 0);
+ qty += 2;
+ if (*p == 0x0a) {
+ mem2hex(gdbstub_cr, outbuf + qty, 2, 0);
+ qty += 2;
+ }
+ p++;
+ n--;
+ }
+
+ outbuf[qty] = 0;
+ putpacket(outbuf);
+ }
+
+ gdbstub_busy = busy;
+}
+
+static kdev_t gdbstub_console_dev(struct console *con)
+{
+ return MKDEV(1, 3); /* /dev/null */
+}
+
+static struct console gdbstub_console = {
+ .name = "gdb",
+ .write = gdbstub_console_write,
+ .device = gdbstub_console_dev,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+#endif
+
+/*
+ * Convert the memory pointed to by mem into hex, placing result in buf.
+ * - if successful, return a pointer to the last char put in buf (NUL)
+ * - in case of mem fault, return NULL
+ * may_fault is non-zero if we are reading from arbitrary memory, but is
+ * currently not used.
+ */
+static
+unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
+{
+ const u8 *mem = _mem;
+ u8 ch[4];
+
+ if ((u32) mem & 1 && count >= 1) {
+ if (gdbstub_read_byte(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ mem++;
+ count--;
+ }
+
+ if ((u32) mem & 3 && count >= 2) {
+ if (gdbstub_read_word(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ *buf++ = hexchars[ch[1] >> 4];
+ *buf++ = hexchars[ch[1] & 0xf];
+ mem += 2;
+ count -= 2;
+ }
+
+ while (count >= 4) {
+ if (gdbstub_read_dword(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ *buf++ = hexchars[ch[1] >> 4];
+ *buf++ = hexchars[ch[1] & 0xf];
+ *buf++ = hexchars[ch[2] >> 4];
+ *buf++ = hexchars[ch[2] & 0xf];
+ *buf++ = hexchars[ch[3] >> 4];
+ *buf++ = hexchars[ch[3] & 0xf];
+ mem += 4;
+ count -= 4;
+ }
+
+ if (count >= 2) {
+ if (gdbstub_read_word(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ *buf++ = hexchars[ch[1] >> 4];
+ *buf++ = hexchars[ch[1] & 0xf];
+ mem += 2;
+ count -= 2;
+ }
+
+ if (count >= 1) {
+ if (gdbstub_read_byte(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ }
+
+ *buf = 0;
+ return buf;
+}
+
+/*
+ * convert the hex array pointed to by buf into binary to be placed in mem
+ * return a pointer to the character AFTER the last byte written
+ * may_fault is non-zero if we are reading from arbitrary memory, but is
+ * currently not used.
+ */
+static
+const char *hex2mem(const char *buf, void *_mem, int count, int may_fault)
+{
+ u8 *mem = _mem;
+ union {
+ u32 val;
+ u8 b[4];
+ } ch;
+
+ if ((u32) mem & 1 && count >= 1) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ if (gdbstub_write_byte(ch.val, mem) != 0)
+ return 0;
+ mem++;
+ count--;
+ }
+
+ if ((u32) mem & 3 && count >= 2) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ ch.b[1] = hex(*buf++) << 4;
+ ch.b[1] |= hex(*buf++);
+ if (gdbstub_write_word(ch.val, mem) != 0)
+ return 0;
+ mem += 2;
+ count -= 2;
+ }
+
+ while (count >= 4) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ ch.b[1] = hex(*buf++) << 4;
+ ch.b[1] |= hex(*buf++);
+ ch.b[2] = hex(*buf++) << 4;
+ ch.b[2] |= hex(*buf++);
+ ch.b[3] = hex(*buf++) << 4;
+ ch.b[3] |= hex(*buf++);
+ if (gdbstub_write_dword(ch.val, mem) != 0)
+ return 0;
+ mem += 4;
+ count -= 4;
+ }
+
+ if (count >= 2) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ ch.b[1] = hex(*buf++) << 4;
+ ch.b[1] |= hex(*buf++);
+ if (gdbstub_write_word(ch.val, mem) != 0)
+ return 0;
+ mem += 2;
+ count -= 2;
+ }
+
+ if (count >= 1) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ if (gdbstub_write_byte(ch.val, mem) != 0)
+ return 0;
+ }
+
+ return buf;
+}
+
+/*
+ * This table contains the mapping between MN10300 exception codes, and
+ * signals, which are primarily what GDB understands. It also indicates
+ * which hardware traps we need to commandeer when initializing the stub.
+ */
+static const struct excep_to_sig_map {
+ enum exception_code excep; /* MN10300 exception code */
+ unsigned char signo; /* Signal that we map this into */
+} excep_to_sig_map[] = {
+ { EXCEP_ITLBMISS, SIGSEGV },
+ { EXCEP_DTLBMISS, SIGSEGV },
+ { EXCEP_TRAP, SIGTRAP },
+ { EXCEP_ISTEP, SIGTRAP },
+ { EXCEP_IBREAK, SIGTRAP },
+ { EXCEP_OBREAK, SIGTRAP },
+ { EXCEP_UNIMPINS, SIGILL },
+ { EXCEP_UNIMPEXINS, SIGILL },
+ { EXCEP_MEMERR, SIGSEGV },
+ { EXCEP_MISALIGN, SIGSEGV },
+ { EXCEP_BUSERROR, SIGBUS },
+ { EXCEP_ILLINSACC, SIGSEGV },
+ { EXCEP_ILLDATACC, SIGSEGV },
+ { EXCEP_IOINSACC, SIGSEGV },
+ { EXCEP_PRIVINSACC, SIGSEGV },
+ { EXCEP_PRIVDATACC, SIGSEGV },
+ { EXCEP_FPU_DISABLED, SIGFPE },
+ { EXCEP_FPU_UNIMPINS, SIGFPE },
+ { EXCEP_FPU_OPERATION, SIGFPE },
+ { EXCEP_WDT, SIGALRM },
+ { EXCEP_NMI, SIGQUIT },
+ { EXCEP_IRQ_LEVEL0, SIGINT },
+ { EXCEP_IRQ_LEVEL1, SIGINT },
+ { EXCEP_IRQ_LEVEL2, SIGINT },
+ { EXCEP_IRQ_LEVEL3, SIGINT },
+ { EXCEP_IRQ_LEVEL4, SIGINT },
+ { EXCEP_IRQ_LEVEL5, SIGINT },
+ { EXCEP_IRQ_LEVEL6, SIGINT },
+ { 0, 0}
+};
+
+/*
+ * convert the MN10300 exception code into a UNIX signal number
+ */
+static int computeSignal(enum exception_code excep)
+{
+ const struct excep_to_sig_map *map;
+
+ for (map = excep_to_sig_map; map->signo; map++)
+ if (map->excep == excep)
+ return map->signo;
+
+ return SIGHUP; /* default for things we don't know about */
+}
+
+static u32 gdbstub_fpcr, gdbstub_fpufs_array[32];
+
+/*
+ *
+ */
+static void gdbstub_store_fpu(void)
+{
+#ifdef CONFIG_FPU
+
+ asm volatile(
+ "or %2,epsw\n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ "nop\n"
+ "nop\n"
+#endif
+ "mov %1, a1\n"
+ "fmov fs0, (a1+)\n"
+ "fmov fs1, (a1+)\n"
+ "fmov fs2, (a1+)\n"
+ "fmov fs3, (a1+)\n"
+ "fmov fs4, (a1+)\n"
+ "fmov fs5, (a1+)\n"
+ "fmov fs6, (a1+)\n"
+ "fmov fs7, (a1+)\n"
+ "fmov fs8, (a1+)\n"
+ "fmov fs9, (a1+)\n"
+ "fmov fs10, (a1+)\n"
+ "fmov fs11, (a1+)\n"
+ "fmov fs12, (a1+)\n"
+ "fmov fs13, (a1+)\n"
+ "fmov fs14, (a1+)\n"
+ "fmov fs15, (a1+)\n"
+ "fmov fs16, (a1+)\n"
+ "fmov fs17, (a1+)\n"
+ "fmov fs18, (a1+)\n"
+ "fmov fs19, (a1+)\n"
+ "fmov fs20, (a1+)\n"
+ "fmov fs21, (a1+)\n"
+ "fmov fs22, (a1+)\n"
+ "fmov fs23, (a1+)\n"
+ "fmov fs24, (a1+)\n"
+ "fmov fs25, (a1+)\n"
+ "fmov fs26, (a1+)\n"
+ "fmov fs27, (a1+)\n"
+ "fmov fs28, (a1+)\n"
+ "fmov fs29, (a1+)\n"
+ "fmov fs30, (a1+)\n"
+ "fmov fs31, (a1+)\n"
+ "fmov fpcr, %0\n"
+ : "=d"(gdbstub_fpcr)
+ : "g" (&gdbstub_fpufs_array), "i"(EPSW_FE)
+ : "a1"
+ );
+#endif
+}
+
+/*
+ *
+ */
+static void gdbstub_load_fpu(void)
+{
+#ifdef CONFIG_FPU
+
+ asm volatile(
+ "or %1,epsw\n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ "nop\n"
+ "nop\n"
+#endif
+ "mov %0, a1\n"
+ "fmov (a1+), fs0\n"
+ "fmov (a1+), fs1\n"
+ "fmov (a1+), fs2\n"
+ "fmov (a1+), fs3\n"
+ "fmov (a1+), fs4\n"
+ "fmov (a1+), fs5\n"
+ "fmov (a1+), fs6\n"
+ "fmov (a1+), fs7\n"
+ "fmov (a1+), fs8\n"
+ "fmov (a1+), fs9\n"
+ "fmov (a1+), fs10\n"
+ "fmov (a1+), fs11\n"
+ "fmov (a1+), fs12\n"
+ "fmov (a1+), fs13\n"
+ "fmov (a1+), fs14\n"
+ "fmov (a1+), fs15\n"
+ "fmov (a1+), fs16\n"
+ "fmov (a1+), fs17\n"
+ "fmov (a1+), fs18\n"
+ "fmov (a1+), fs19\n"
+ "fmov (a1+), fs20\n"
+ "fmov (a1+), fs21\n"
+ "fmov (a1+), fs22\n"
+ "fmov (a1+), fs23\n"
+ "fmov (a1+), fs24\n"
+ "fmov (a1+), fs25\n"
+ "fmov (a1+), fs26\n"
+ "fmov (a1+), fs27\n"
+ "fmov (a1+), fs28\n"
+ "fmov (a1+), fs29\n"
+ "fmov (a1+), fs30\n"
+ "fmov (a1+), fs31\n"
+ "fmov %2, fpcr\n"
+ :
+ : "g" (&gdbstub_fpufs_array), "i"(EPSW_FE), "d"(gdbstub_fpcr)
+ : "a1"
+ );
+#endif
+}
+
+/*
+ * set a software breakpoint
+ */
+int gdbstub_set_breakpoint(u8 *addr, int len)
+{
+ int bkpt, loop, xloop;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ len = (len + 1) & ~1;
+#endif
+
+ gdbstub_bkpt("setbkpt(%p,%d)\n", addr, len);
+
+ for (bkpt = 255; bkpt >= 0; bkpt--)
+ if (!gdbstub_bkpts[bkpt].addr)
+ break;
+ if (bkpt < 0)
+ return -ENOSPC;
+
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_read_byte(&addr[loop],
+ &gdbstub_bkpts[bkpt].origbytes[loop]
+ ) < 0)
+ return -EFAULT;
+
+ gdbstub_flush_caches = 1;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_write_byte(0xF7, &addr[loop]) < 0)
+ goto restore;
+#else
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_write_byte(0xFF, &addr[loop]) < 0)
+ goto restore;
+#endif
+
+ gdbstub_bkpts[bkpt].addr = addr;
+ gdbstub_bkpts[bkpt].len = len;
+
+ gdbstub_bkpt("Set BKPT[%02x]: %p-%p {%02x%02x%02x%02x%02x%02x%02x}\n",
+ bkpt,
+ gdbstub_bkpts[bkpt].addr,
+ gdbstub_bkpts[bkpt].addr + gdbstub_bkpts[bkpt].len - 1,
+ gdbstub_bkpts[bkpt].origbytes[0],
+ gdbstub_bkpts[bkpt].origbytes[1],
+ gdbstub_bkpts[bkpt].origbytes[2],
+ gdbstub_bkpts[bkpt].origbytes[3],
+ gdbstub_bkpts[bkpt].origbytes[4],
+ gdbstub_bkpts[bkpt].origbytes[5],
+ gdbstub_bkpts[bkpt].origbytes[6]
+ );
+
+ return 0;
+
+restore:
+ for (xloop = 0; xloop < loop; xloop++)
+ gdbstub_write_byte(gdbstub_bkpts[bkpt].origbytes[xloop],
+ addr + xloop);
+ return -EFAULT;
+}
+
+/*
+ * clear a software breakpoint
+ */
+int gdbstub_clear_breakpoint(u8 *addr, int len)
+{
+ int bkpt, loop;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ len = (len + 1) & ~1;
+#endif
+
+ gdbstub_bkpt("clearbkpt(%p,%d)\n", addr, len);
+
+ for (bkpt = 255; bkpt >= 0; bkpt--)
+ if (gdbstub_bkpts[bkpt].addr == addr &&
+ gdbstub_bkpts[bkpt].len == len)
+ break;
+ if (bkpt < 0)
+ return -ENOENT;
+
+ gdbstub_bkpts[bkpt].addr = NULL;
+
+ gdbstub_flush_caches = 1;
+
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_write_byte(gdbstub_bkpts[bkpt].origbytes[loop],
+ addr + loop) < 0)
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
+ * This function does all command processing for interfacing to gdb
+ * - returns 1 if the exception should be skipped, 0 otherwise.
+ */
+static int gdbstub(struct pt_regs *regs, enum exception_code excep)
+{
+ unsigned long *stack;
+ unsigned long epsw, mdr;
+ uint32_t zero, ssp;
+ uint8_t broke;
+ char *ptr;
+ int sigval;
+ int addr;
+ int length;
+ int loop;
+
+ if (excep == EXCEP_FPU_DISABLED)
+ return 0;
+
+ gdbstub_flush_caches = 0;
+
+ mn10300_set_gdbleds(1);
+
+ asm volatile("mov mdr,%0" : "=d"(mdr));
+ asm volatile("mov epsw,%0" : "=d"(epsw));
+ asm volatile("mov %0,epsw"
+ :: "d"((epsw & ~EPSW_IM) | EPSW_IE | EPSW_IM_1));
+
+ gdbstub_store_fpu();
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ /* skip the initial pause loop */
+ if (regs->pc == (unsigned long) __gdbstub_pause)
+ regs->pc = (unsigned long) start_kernel;
+#endif
+
+ /* if we were single stepping, restore the opcodes hoisted for the
+ * breakpoint[s] */
+ broke = 0;
+ if ((step_bp[0].addr && step_bp[0].addr == (u8 *) regs->pc) ||
+ (step_bp[1].addr && step_bp[1].addr == (u8 *) regs->pc))
+ broke = 1;
+
+ __gdbstub_restore_bp();
+
+ if (gdbstub_rx_unget) {
+ sigval = SIGINT;
+ if (gdbstub_rx_unget != 3)
+ goto packet_waiting;
+ gdbstub_rx_unget = 0;
+ }
+
+ stack = (unsigned long *) regs->sp;
+ sigval = broke ? SIGTRAP : computeSignal(excep);
+
+ /* send information about a BUG() */
+ if (!user_mode(regs) && excep == EXCEP_SYSCALL15) {
+ const struct bug_entry *bug;
+
+ bug = find_bug(regs->pc);
+ if (bug)
+ goto found_bug;
+ length = snprintf(trans_buffer, sizeof(trans_buffer),
+ "BUG() at address %lx\n", regs->pc);
+ goto send_bug_pkt;
+
+ found_bug:
+ length = snprintf(trans_buffer, sizeof(trans_buffer),
+ "BUG() at address %lx (%s:%d)\n",
+ regs->pc, bug->file, bug->line);
+
+ send_bug_pkt:
+ ptr = output_buffer;
+ *ptr++ = 'O';
+ ptr = mem2hex(trans_buffer, ptr, length, 0);
+ *ptr = 0;
+ putpacket(output_buffer);
+
+ regs->pc -= 2;
+ sigval = SIGABRT;
+ } else if (regs->pc == (unsigned long) __gdbstub_bug_trap) {
+ regs->pc = regs->mdr;
+ sigval = SIGABRT;
+ }
+
+ /*
+ * send a message to the debugger's user saying what happened if it may
+ * not be clear cut (we can't map exceptions onto signals properly)
+ */
+ if (sigval != SIGINT && sigval != SIGTRAP && sigval != SIGILL) {
+ static const char title[] = "Excep ", tbcberr[] = "BCBERR ";
+ static const char crlf[] = "\r\n";
+ char hx;
+ u32 bcberr = BCBERR;
+
+ ptr = output_buffer;
+ *ptr++ = 'O';
+ ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
+
+ hx = hexchars[(excep & 0xf000) >> 12];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(excep & 0x0f00) >> 8];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(excep & 0x00f0) >> 4];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(excep & 0x000f)];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+
+ ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
+ *ptr = 0;
+ putpacket(output_buffer); /* send it off... */
+
+ /* BCBERR */
+ ptr = output_buffer;
+ *ptr++ = 'O';
+ ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
+
+ hx = hexchars[(bcberr & 0xf0000000) >> 28];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x0f000000) >> 24];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x00f00000) >> 20];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x000f0000) >> 16];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x0000f000) >> 12];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x00000f00) >> 8];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x000000f0) >> 4];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x0000000f)];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+
+ ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
+ *ptr = 0;
+ putpacket(output_buffer); /* send it off... */
+ }
+
+ /*
+ * tell the debugger that an exception has occurred
+ */
+ ptr = output_buffer;
+
+ /*
+ * Send trap type (converted to signal)
+ */
+ *ptr++ = 'T';
+ *ptr++ = hexchars[sigval >> 4];
+ *ptr++ = hexchars[sigval & 0xf];
+
+ /*
+ * Send Error PC
+ */
+ *ptr++ = hexchars[GDB_REGID_PC >> 4];
+ *ptr++ = hexchars[GDB_REGID_PC & 0xf];
+ *ptr++ = ':';
+ ptr = mem2hex(®s->pc, ptr, 4, 0);
+ *ptr++ = ';';
+
+ /*
+ * Send frame pointer
+ */
+ *ptr++ = hexchars[GDB_REGID_FP >> 4];
+ *ptr++ = hexchars[GDB_REGID_FP & 0xf];
+ *ptr++ = ':';
+ ptr = mem2hex(®s->a3, ptr, 4, 0);
+ *ptr++ = ';';
+
+ /*
+ * Send stack pointer
+ */
+ ssp = (unsigned long) (regs + 1);
+ *ptr++ = hexchars[GDB_REGID_SP >> 4];
+ *ptr++ = hexchars[GDB_REGID_SP & 0xf];
+ *ptr++ = ':';
+ ptr = mem2hex(&ssp, ptr, 4, 0);
+ *ptr++ = ';';
+
+ *ptr++ = 0;
+ putpacket(output_buffer); /* send it off... */
+
+packet_waiting:
+ /*
+ * Wait for input from remote GDB
+ */
+ while (1) {
+ output_buffer[0] = 0;
+ getpacket(input_buffer);
+
+ switch (input_buffer[0]) {
+ /* request repeat of last signal number */
+ case '?':
+ output_buffer[0] = 'S';
+ output_buffer[1] = hexchars[sigval >> 4];
+ output_buffer[2] = hexchars[sigval & 0xf];
+ output_buffer[3] = 0;
+ break;
+
+ case 'd':
+ /* toggle debug flag */
+ break;
+
+ /*
+ * Return the value of the CPU registers
+ */
+ case 'g':
+ zero = 0;
+ ssp = (u32) (regs + 1);
+ ptr = output_buffer;
+ ptr = mem2hex(®s->d0, ptr, 4, 0);
+ ptr = mem2hex(®s->d1, ptr, 4, 0);
+ ptr = mem2hex(®s->d2, ptr, 4, 0);
+ ptr = mem2hex(®s->d3, ptr, 4, 0);
+ ptr = mem2hex(®s->a0, ptr, 4, 0);
+ ptr = mem2hex(®s->a1, ptr, 4, 0);
+ ptr = mem2hex(®s->a2, ptr, 4, 0);
+ ptr = mem2hex(®s->a3, ptr, 4, 0);
+
+ ptr = mem2hex(&ssp, ptr, 4, 0); /* 8 */
+ ptr = mem2hex(®s->pc, ptr, 4, 0);
+ ptr = mem2hex(®s->mdr, ptr, 4, 0);
+ ptr = mem2hex(®s->epsw, ptr, 4, 0);
+ ptr = mem2hex(®s->lir, ptr, 4, 0);
+ ptr = mem2hex(®s->lar, ptr, 4, 0);
+ ptr = mem2hex(®s->mdrq, ptr, 4, 0);
+
+ ptr = mem2hex(®s->e0, ptr, 4, 0); /* 15 */
+ ptr = mem2hex(®s->e1, ptr, 4, 0);
+ ptr = mem2hex(®s->e2, ptr, 4, 0);
+ ptr = mem2hex(®s->e3, ptr, 4, 0);
+ ptr = mem2hex(®s->e4, ptr, 4, 0);
+ ptr = mem2hex(®s->e5, ptr, 4, 0);
+ ptr = mem2hex(®s->e6, ptr, 4, 0);
+ ptr = mem2hex(®s->e7, ptr, 4, 0);
+
+ ptr = mem2hex(&ssp, ptr, 4, 0);
+ ptr = mem2hex(®s, ptr, 4, 0);
+ ptr = mem2hex(®s->sp, ptr, 4, 0);
+ ptr = mem2hex(®s->mcrh, ptr, 4, 0); /* 26 */
+ ptr = mem2hex(®s->mcrl, ptr, 4, 0);
+ ptr = mem2hex(®s->mcvf, ptr, 4, 0);
+
+ ptr = mem2hex(&gdbstub_fpcr, ptr, 4, 0); /* 29 - FPCR */
+ ptr = mem2hex(&zero, ptr, 4, 0);
+ ptr = mem2hex(&zero, ptr, 4, 0);
+ for (loop = 0; loop < 32; loop++)
+ ptr = mem2hex(&gdbstub_fpufs_array[loop],
+ ptr, 4, 0); /* 32 - FS0-31 */
+
+ break;
+
+ /*
+ * set the value of the CPU registers - return OK
+ */
+ case 'G':
+ {
+ const char *ptr;
+
+ ptr = &input_buffer[1];
+ ptr = hex2mem(ptr, ®s->d0, 4, 0);
+ ptr = hex2mem(ptr, ®s->d1, 4, 0);
+ ptr = hex2mem(ptr, ®s->d2, 4, 0);
+ ptr = hex2mem(ptr, ®s->d3, 4, 0);
+ ptr = hex2mem(ptr, ®s->a0, 4, 0);
+ ptr = hex2mem(ptr, ®s->a1, 4, 0);
+ ptr = hex2mem(ptr, ®s->a2, 4, 0);
+ ptr = hex2mem(ptr, ®s->a3, 4, 0);
+
+ ptr = hex2mem(ptr, &ssp, 4, 0); /* 8 */
+ ptr = hex2mem(ptr, ®s->pc, 4, 0);
+ ptr = hex2mem(ptr, ®s->mdr, 4, 0);
+ ptr = hex2mem(ptr, ®s->epsw, 4, 0);
+ ptr = hex2mem(ptr, ®s->lir, 4, 0);
+ ptr = hex2mem(ptr, ®s->lar, 4, 0);
+ ptr = hex2mem(ptr, ®s->mdrq, 4, 0);
+
+ ptr = hex2mem(ptr, ®s->e0, 4, 0); /* 15 */
+ ptr = hex2mem(ptr, ®s->e1, 4, 0);
+ ptr = hex2mem(ptr, ®s->e2, 4, 0);
+ ptr = hex2mem(ptr, ®s->e3, 4, 0);
+ ptr = hex2mem(ptr, ®s->e4, 4, 0);
+ ptr = hex2mem(ptr, ®s->e5, 4, 0);
+ ptr = hex2mem(ptr, ®s->e6, 4, 0);
+ ptr = hex2mem(ptr, ®s->e7, 4, 0);
+
+ ptr = hex2mem(ptr, &ssp, 4, 0);
+ ptr = hex2mem(ptr, &zero, 4, 0);
+ ptr = hex2mem(ptr, ®s->sp, 4, 0);
+ ptr = hex2mem(ptr, ®s->mcrh, 4, 0); /* 26 */
+ ptr = hex2mem(ptr, ®s->mcrl, 4, 0);
+ ptr = hex2mem(ptr, ®s->mcvf, 4, 0);
+
+ ptr = hex2mem(ptr, &zero, 4, 0); /* 29 - FPCR */
+ ptr = hex2mem(ptr, &zero, 4, 0);
+ ptr = hex2mem(ptr, &zero, 4, 0);
+ for (loop = 0; loop < 32; loop++) /* 32 - FS0-31 */
+ ptr = hex2mem(ptr, &zero, 4, 0);
+
+#if 0
+ /*
+ * See if the stack pointer has moved. If so, then copy
+ * the saved locals and ins to the new location.
+ */
+ unsigned long *newsp = (unsigned long *) registers[SP];
+ if (sp != newsp)
+ sp = memcpy(newsp, sp, 16 * 4);
+#endif
+
+ gdbstub_strcpy(output_buffer, "OK");
+ }
+ break;
+
+ /*
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA
+ */
+ case 'm':
+ ptr = &input_buffer[1];
+
+ if (hexToInt(&ptr, &addr) &&
+ *ptr++ == ',' &&
+ hexToInt(&ptr, &length)
+ ) {
+ if (mem2hex((char *) addr, output_buffer,
+ length, 1))
+ break;
+ gdbstub_strcpy(output_buffer, "E03");
+ } else {
+ gdbstub_strcpy(output_buffer, "E01");
+ }
+ break;
+
+ /*
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA
+ * return OK
+ */
+ case 'M':
+ ptr = &input_buffer[1];
+
+ if (hexToInt(&ptr, &addr) &&
+ *ptr++ == ',' &&
+ hexToInt(&ptr, &length) &&
+ *ptr++ == ':'
+ ) {
+ if (hex2mem(ptr, (char *) addr, length, 1))
+ gdbstub_strcpy(output_buffer, "OK");
+ else
+ gdbstub_strcpy(output_buffer, "E03");
+
+ gdbstub_flush_caches = 1;
+ } else {
+ gdbstub_strcpy(output_buffer, "E02");
+ }
+ break;
+
+ /*
+ * cAA..AA Continue at address AA..AA(optional)
+ */
+ case 'c':
+ /* try to read optional parameter, pc unchanged if no
+ * parm */
+
+ ptr = &input_buffer[1];
+ if (hexToInt(&ptr, &addr))
+ regs->pc = addr;
+ goto done;
+
+ /*
+ * kill the program
+ */
+ case 'k' :
+ goto done; /* just continue */
+
+ /*
+ * Reset the whole machine (FIXME: system dependent)
+ */
+ case 'r':
+ break;
+
+ /*
+ * Step to next instruction
+ */
+ case 's':
+ /*
+ * using the T flag doesn't seem to perform single
+ * stepping (it seems to wind up being caught by the
+ * JTAG unit), so we have to use breakpoints and
+ * continue instead.
+ */
+ if (gdbstub_single_step(regs) < 0)
+ /* ignore any fault error for now */
+ gdbstub_printk("unable to set single-step"
+ " bp\n");
+ goto done;
+
+ /*
+ * Set baud rate (bBB)
+ */
+ case 'b':
+ do {
+ int baudrate;
+
+ ptr = &input_buffer[1];
+ if (!hexToInt(&ptr, &baudrate)) {
+ gdbstub_strcpy(output_buffer, "B01");
+ break;
+ }
+
+ if (baudrate) {
+ /* ACK before changing speed */
+ putpacket("OK");
+ gdbstub_io_set_baud(baudrate);
+ }
+ } while (0);
+ break;
+
+ /*
+ * Set breakpoint
+ */
+ case 'Z':
+ ptr = &input_buffer[1];
+
+ if (!hexToInt(&ptr, &loop) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &addr) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &length)
+ ) {
+ gdbstub_strcpy(output_buffer, "E01");
+ break;
+ }
+
+ /* only support software breakpoints */
+ gdbstub_strcpy(output_buffer, "E03");
+ if (loop != 0 ||
+ length < 1 ||
+ length > 7 ||
+ (unsigned long) addr < 4096)
+ break;
+
+ if (gdbstub_set_breakpoint((u8 *) addr, length) < 0)
+ break;
+
+ gdbstub_strcpy(output_buffer, "OK");
+ break;
+
+ /*
+ * Clear breakpoint
+ */
+ case 'z':
+ ptr = &input_buffer[1];
+
+ if (!hexToInt(&ptr, &loop) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &addr) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &length)
+ ) {
+ gdbstub_strcpy(output_buffer, "E01");
+ break;
+ }
+
+ /* only support software breakpoints */
+ gdbstub_strcpy(output_buffer, "E03");
+ if (loop != 0 ||
+ length < 1 ||
+ length > 7 ||
+ (unsigned long) addr < 4096)
+ break;
+
+ if (gdbstub_clear_breakpoint((u8 *) addr, length) < 0)
+ break;
+
+ gdbstub_strcpy(output_buffer, "OK");
+ break;
+
+ default:
+ gdbstub_proto("### GDB Unsupported Cmd '%s'\n",
+ input_buffer);
+ break;
+ }
+
+ /* reply to the request */
+ putpacket(output_buffer);
+ }
+
+done:
+ /*
+ * Need to flush the instruction cache here, as we may
+ * have deposited a breakpoint, and the icache probably
+ * has no way of knowing that a data ref to some location
+ * may have changed something that is in the instruction
+ * cache.
+ * NB: We flush both caches, just to be sure...
+ */
+ if (gdbstub_flush_caches)
+ gdbstub_purge_cache();
+
+ gdbstub_load_fpu();
+ mn10300_set_gdbleds(0);
+ if (excep == EXCEP_NMI)
+ NMICR = NMICR_NMIF;
+
+ touch_softlockup_watchdog();
+
+ local_irq_restore(epsw);
+ return 1;
+}
+
+/*
+ * handle event interception
+ */
+asmlinkage int gdbstub_intercept(struct pt_regs *regs,
+ enum exception_code excep)
+{
+ static u8 notfirst = 1;
+ int ret;
+
+ if (gdbstub_busy)
+ gdbstub_printk("--> gdbstub reentered itself\n");
+ gdbstub_busy = 1;
+
+ if (notfirst) {
+ unsigned long mdr;
+ asm("mov mdr,%0" : "=d"(mdr));
+
+ gdbstub_entry(
+ "--> gdbstub_intercept(%p,%04x) [MDR=%lx PC=%lx]\n",
+ regs, excep, mdr, regs->pc);
+
+ gdbstub_entry(
+ "PC: %08lx EPSW: %08lx SSP: %08lx mode: %s\n",
+ regs->pc, regs->epsw, (unsigned long) &ret,
+ user_mode(regs) ? "User" : "Super");
+ gdbstub_entry(
+ "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
+ regs->d0, regs->d1, regs->d2, regs->d3);
+ gdbstub_entry(
+ "a0: %08lx a1: %08lx a2: %08lx a3: %08lx\n",
+ regs->a0, regs->a1, regs->a2, regs->a3);
+ gdbstub_entry(
+ "e0: %08lx e1: %08lx e2: %08lx e3: %08lx\n",
+ regs->e0, regs->e1, regs->e2, regs->e3);
+ gdbstub_entry(
+ "e4: %08lx e5: %08lx e6: %08lx e7: %08lx\n",
+ regs->e4, regs->e5, regs->e6, regs->e7);
+ gdbstub_entry(
+ "lar: %08lx lir: %08lx mdr: %08lx usp: %08lx\n",
+ regs->lar, regs->lir, regs->mdr, regs->sp);
+ gdbstub_entry(
+ "cvf: %08lx crl: %08lx crh: %08lx drq: %08lx\n",
+ regs->mcvf, regs->mcrl, regs->mcrh, regs->mdrq);
+ gdbstub_entry(
+ "threadinfo=%p task=%p)\n",
+ current_thread_info(), current);
+ } else {
+ notfirst = 1;
+ }
+
+ ret = gdbstub(regs, excep);
+
+ gdbstub_entry("<-- gdbstub_intercept()\n");
+ gdbstub_busy = 0;
+ return ret;
+}
+
+/*
+ * handle the GDB stub itself causing an exception
+ */
+asmlinkage void gdbstub_exception(struct pt_regs *regs,
+ enum exception_code excep)
+{
+ unsigned long mdr;
+
+ asm("mov mdr,%0" : "=d"(mdr));
+ gdbstub_entry("--> gdbstub exception({%p},%04x) [MDR=%lx]\n",
+ regs, excep, mdr);
+
+ while ((unsigned long) regs == 0xffffffff) {}
+
+ /* handle guarded memory accesses where we know it might fault */
+ if (regs->pc == (unsigned) gdbstub_read_byte_guard) {
+ regs->pc = (unsigned) gdbstub_read_byte_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_read_word_guard) {
+ regs->pc = (unsigned) gdbstub_read_word_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_read_dword_guard) {
+ regs->pc = (unsigned) gdbstub_read_dword_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_write_byte_guard) {
+ regs->pc = (unsigned) gdbstub_write_byte_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_write_word_guard) {
+ regs->pc = (unsigned) gdbstub_write_word_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_write_dword_guard) {
+ regs->pc = (unsigned) gdbstub_write_dword_cont;
+ goto fault;
+ }
+
+ gdbstub_printk("\n### GDB stub caused an exception ###\n");
+
+ /* something went horribly wrong */
+ console_verbose();
+ show_registers(regs);
+
+ panic("GDB Stub caused an unexpected exception - can't continue\n");
+
+ /* we caught an attempt by the stub to access silly memory */
+fault:
+ gdbstub_entry("<-- gdbstub exception() = EFAULT\n");
+ regs->d0 = -EFAULT;
+ return;
+}
+
+/*
+ * send an exit message to GDB
+ */
+void gdbstub_exit(int status)
+{
+ unsigned char checksum;
+ unsigned char ch;
+ int count;
+
+ gdbstub_busy = 1;
+ output_buffer[0] = 'W';
+ output_buffer[1] = hexchars[(status >> 4) & 0x0F];
+ output_buffer[2] = hexchars[status & 0x0F];
+ output_buffer[3] = 0;
+
+ gdbstub_io_tx_char('$');
+ checksum = 0;
+ count = 0;
+
+ while ((ch = output_buffer[count]) != 0) {
+ gdbstub_io_tx_char(ch);
+ checksum += ch;
+ count += 1;
+ }
+
+ gdbstub_io_tx_char('#');
+ gdbstub_io_tx_char(hexchars[checksum >> 4]);
+ gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+
+ /* make sure the output is flushed, or else RedBoot might clobber it */
+ gdbstub_io_tx_flush();
+
+ gdbstub_busy = 0;
+}
+
+/*
+ * initialise the GDB stub
+ */
+asmlinkage void __init gdbstub_init(void)
+{
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ unsigned char ch;
+ int ret;
+#endif
+
+ gdbstub_busy = 1;
+
+ printk(KERN_INFO "%s", gdbstub_banner);
+
+ gdbstub_io_init();
+
+ gdbstub_entry("--> gdbstub_init\n");
+
+ /* try to talk to GDB (or anyone insane enough to want to type GDB
+ * protocol by hand) */
+ gdbstub_io("### GDB Tx ACK\n");
+ gdbstub_io_tx_char('+'); /* 'hello world' */
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ gdbstub_printk("GDB Stub waiting for packet\n");
+
+ /* in case GDB is started before us, ACK any packets that are already
+ * sitting there (presumably "$?#xx")
+ */
+ do { gdbstub_io_rx_char(&ch, 0); } while (ch != '$');
+ do { gdbstub_io_rx_char(&ch, 0); } while (ch != '#');
+ /* eat first csum byte */
+ do { ret = gdbstub_io_rx_char(&ch, 0); } while (ret != 0);
+ /* eat second csum byte */
+ do { ret = gdbstub_io_rx_char(&ch, 0); } while (ret != 0);
+
+ gdbstub_io("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-'); /* NAK it */
+
+#else
+ printk("GDB Stub ready\n");
+#endif
+
+ gdbstub_busy = 0;
+ gdbstub_entry("<-- gdbstub_init\n");
+}
+
+/*
+ * register the console at a more appropriate time
+ */
+#ifdef CONFIG_GDBSTUB_CONSOLE
+static int __init gdbstub_postinit(void)
+{
+ printk(KERN_NOTICE "registering console\n");
+ register_console(&gdbstub_console);
+ return 0;
+}
+
+__initcall(gdbstub_postinit);
+#endif
+
+/*
+ * handle character reception on GDB serial port
+ * - jump into the GDB stub if BREAK is detected on the serial line
+ */
+asmlinkage void gdbstub_rx_irq(struct pt_regs *regs, enum exception_code excep)
+{
+ char ch;
+ int ret;
+
+ gdbstub_entry("--> gdbstub_rx_irq\n");
+
+ do {
+ ret = gdbstub_io_rx_char(&ch, 1);
+ if (ret != -EIO && ret != -EAGAIN) {
+ if (ret != -EINTR)
+ gdbstub_rx_unget = ch;
+ gdbstub(regs, excep);
+ }
+ } while (ret != -EAGAIN);
+
+ gdbstub_entry("<-- gdbstub_rx_irq\n");
+}
diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S
new file mode 100644
index 0000000..606bd8c6
--- /dev/null
+++ b/arch/mn10300/kernel/head.S
@@ -0,0 +1,255 @@
+/* Boot entry point for MN10300 kernel
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <linux/serial_reg.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/frame.inc>
+#include <asm/param.h>
+#include <asm/unit/serial.h>
+
+ .section .text.head,"ax"
+
+###############################################################################
+#
+# bootloader entry point
+#
+###############################################################################
+ .globl _start
+ .type _start,@function
+_start:
+ # save commandline pointer
+ mov d0,a3
+
+ # preload the PGD pointer register
+ mov swapper_pg_dir,d0
+ mov d0,(PTBR)
+
+ # turn on the TLBs
+ mov MMUCTR_IIV|MMUCTR_DIV,d0
+ mov d0,(MMUCTR)
+ mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0
+ mov d0,(MMUCTR)
+
+ # turn on AM33v2 exception handling mode and set the trap table base
+ movhu (CPUP),d0
+ or CPUP_EXM_AM33V2,d0
+ movhu d0,(CPUP)
+ mov CONFIG_INTERRUPT_VECTOR_BASE,d0
+ mov d0,(TBR)
+
+ # invalidate and enable both of the caches
+ mov CHCTR,a0
+ clr d0
+ movhu d0,(a0) # turn off first
+ mov CHCTR_ICINV|CHCTR_DCINV,d0
+ movhu d0,(a0)
+ setlb
+ mov (a0),d0
+ btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
+ lne
+
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_CACHE_WBACK
+#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
+#else
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0
+#endif /* CACHE_DISABLED */
+#else
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
+#endif /* WBACK */
+ movhu d0,(a0) # enable
+#endif /* NOWRALLOC */
+
+ # turn on RTS on the debug serial port if applicable
+#ifdef CONFIG_MN10300_UNIT_ASB2305
+ bset UART_MCR_RTS,(ASB2305_DEBUG_MCR)
+#endif
+
+ # clear the BSS area
+ mov __bss_start,a0
+ mov __bss_stop,a1
+ clr d0
+bssclear:
+ cmp a1,a0
+ bge bssclear_end
+ mov d0,(a0)
+ inc4 a0
+ bra bssclear
+bssclear_end:
+
+ # retrieve the parameters (including command line) before we overwrite
+ # them
+ cmp 0xabadcafe,d1
+ bne __no_parameters
+
+__copy_parameters:
+ mov redboot_command_line,a0
+ mov a0,a1
+ add COMMAND_LINE_SIZE,a1
+1:
+ movbu (a3),d0
+ inc a3
+ movbu d0,(a0)
+ inc a0
+ cmp a1,a0
+ blt 1b
+
+ mov redboot_platform_name,a0
+ mov a0,a1
+ add COMMAND_LINE_SIZE,a1
+ mov d2,a3
+1:
+ movbu (a3),d0
+ inc a3
+ movbu d0,(a0)
+ inc a0
+ cmp a1,a0
+ blt 1b
+
+__no_parameters:
+
+ # set up the registers with recognisable rubbish in them
+ mov init_thread_union+THREAD_SIZE-12,sp
+
+ mov 0xea01eaea,d0
+ mov d0,(4,sp) # EPSW save area
+ mov 0xea02eaea,d0
+ mov d0,(8,sp) # PC save area
+
+ mov 0xeb0060ed,d0
+ mov d0,mdr
+ mov 0xeb0061ed,d0
+ mov d0,mdrq
+ mov 0xeb0062ed,d0
+ mov d0,mcrh
+ mov 0xeb0063ed,d0
+ mov d0,mcrl
+ mov 0xeb0064ed,d0
+ mov d0,mcvf
+ mov 0xed0065ed,a3
+ mov a3,usp
+
+ mov 0xed00e0ed,e0
+ mov 0xed00e1ed,e1
+ mov 0xed00e2ed,e2
+ mov 0xed00e3ed,e3
+ mov 0xed00e4ed,e4
+ mov 0xed00e5ed,e5
+ mov 0xed00e6ed,e6
+ mov 0xed00e7ed,e7
+
+ mov 0xed00d0ed,d0
+ mov 0xed00d1ed,d1
+ mov 0xed00d2ed,d2
+ mov 0xed00d3ed,d3
+ mov 0xed00a0ed,a0
+ mov 0xed00a1ed,a1
+ mov 0xed00a2ed,a2
+ mov 0,a3
+
+ # set up the initial kernel stack
+ SAVE_ALL
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+ # put different recognisable rubbish in the regs
+ mov 0xfb0060ed,d0
+ mov d0,mdr
+ mov 0xfb0061ed,d0
+ mov d0,mdrq
+ mov 0xfb0062ed,d0
+ mov d0,mcrh
+ mov 0xfb0063ed,d0
+ mov d0,mcrl
+ mov 0xfb0064ed,d0
+ mov d0,mcvf
+ mov 0xfd0065ed,a0
+ mov a0,usp
+
+ mov 0xfd00e0ed,e0
+ mov 0xfd00e1ed,e1
+ mov 0xfd00e2ed,e2
+ mov 0xfd00e3ed,e3
+ mov 0xfd00e4ed,e4
+ mov 0xfd00e5ed,e5
+ mov 0xfd00e6ed,e6
+ mov 0xfd00e7ed,e7
+
+ mov 0xfd00d0ed,d0
+ mov 0xfd00d1ed,d1
+ mov 0xfd00d2ed,d2
+ mov 0xfd00d3ed,d3
+ mov 0xfd00a0ed,a0
+ mov 0xfd00a1ed,a1
+ mov 0xfd00a2ed,a2
+
+ # we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ mov init_task,e2
+#endif
+
+ # initialise the processor and the unit
+ call processor_init[],0
+ call unit_init[],0
+
+#ifdef CONFIG_GDBSTUB
+ call gdbstub_init[],0
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ .globl __gdbstub_pause
+__gdbstub_pause:
+ bra __gdbstub_pause
+#endif
+#endif
+
+ jmp start_kernel
+ .size _start, _start-.
+ENTRY(__head_end)
+
+/*
+ * This is initialized to disallow all access to the low 2G region
+ * - the high 2G region is managed directly by the MMU
+ * - range 0x70000000-0x7C000000 are initialised for use by VMALLOC
+ */
+ .section .bss
+ .balign PAGE_SIZE
+ENTRY(swapper_pg_dir)
+ .space PTRS_PER_PGD*4
+
+/*
+ * The page tables are initialized to only 8MB here - the final page
+ * tables are set up later depending on memory size.
+ */
+
+ .balign PAGE_SIZE
+ENTRY(empty_zero_page)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(empty_bad_page)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(empty_bad_pte_table)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(large_page_table)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(kernel_vmalloc_ptes)
+ .space ((VMALLOC_END-VMALLOC_START)/PAGE_SIZE)*4
diff --git a/arch/mn10300/kernel/init_task.c b/arch/mn10300/kernel/init_task.c
new file mode 100644
index 0000000..39fe688
--- /dev/null
+++ b/arch/mn10300/kernel/init_task.c
@@ -0,0 +1,45 @@
+/* MN10300 Initial task definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"))) =
+ { INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h
new file mode 100644
index 0000000..eee2eee
--- /dev/null
+++ b/arch/mn10300/kernel/internal.h
@@ -0,0 +1,20 @@
+/* Internal definitions for the arch part of the core kernel
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * kthread.S
+ */
+extern int kernel_thread_helper(int);
+
+/*
+ * entry.S
+ */
+extern void ret_from_fork(struct task_struct *) __attribute__((noreturn));
diff --git a/arch/mn10300/kernel/io.c b/arch/mn10300/kernel/io.c
new file mode 100644
index 0000000..e96fdf6
--- /dev/null
+++ b/arch/mn10300/kernel/io.c
@@ -0,0 +1,30 @@
+/* MN10300 Misaligned multibyte-word I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+/*
+ * output data from a potentially misaligned buffer
+ */
+void __outsl(unsigned long addr, const void *buffer, int count)
+{
+ const unsigned char *buf = buffer;
+ unsigned long val;
+
+ while (count--) {
+ memcpy(&val, buf, 4);
+ outl(val, addr);
+ buf += 4;
+ }
+}
+EXPORT_SYMBOL(__outsl);
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
new file mode 100644
index 0000000..761c434
--- /dev/null
+++ b/arch/mn10300/kernel/irq.c
@@ -0,0 +1,235 @@
+/* MN10300 Arch-specific interrupt handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <asm/setup.h>
+
+unsigned long __mn10300_irq_enabled_epsw = EPSW_IE | EPSW_IM_7;
+EXPORT_SYMBOL(__mn10300_irq_enabled_epsw);
+
+atomic_t irq_err_count;
+
+/*
+ * MN10300 INTC controller operations
+ */
+static void mn10300_cpupic_disable(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_enable(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_ack(unsigned int irq)
+{
+ u16 tmp;
+ *(volatile u8 *) &GxICR(irq) = GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_mask(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL);
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_mask_ack(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_unmask(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_end(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+ tmp = GxICR(irq);
+}
+
+static struct irq_chip mn10300_cpu_pic = {
+ .name = "cpu",
+ .disable = mn10300_cpupic_disable,
+ .enable = mn10300_cpupic_enable,
+ .ack = mn10300_cpupic_ack,
+ .mask = mn10300_cpupic_mask,
+ .mask_ack = mn10300_cpupic_mask_ack,
+ .unmask = mn10300_cpupic_unmask,
+ .end = mn10300_cpupic_end,
+};
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(int irq)
+{
+ printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
+}
+
+/*
+ * change the level at which an IRQ executes
+ * - must not be called whilst interrupts are being processed!
+ */
+void set_intr_level(int irq, u16 level)
+{
+ u16 tmp;
+
+ if (in_interrupt())
+ BUG();
+
+ tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_ENABLE) | level;
+ tmp = GxICR(irq);
+}
+
+/*
+ * mark an interrupt to be ACK'd after interrupt handlers have been run rather
+ * than before
+ * - see Documentation/mn10300/features.txt
+ */
+void set_intr_postackable(int irq)
+{
+ set_irq_handler(irq, handle_level_irq);
+}
+
+/*
+ * initialise the interrupt system
+ */
+void __init init_IRQ(void)
+{
+ int irq;
+
+ for (irq = 0; irq < NR_IRQS; irq++)
+ if (irq_desc[irq].chip == &no_irq_type)
+ set_irq_chip_and_handler(irq, &mn10300_cpu_pic,
+ handle_edge_irq);
+ unit_init_IRQ();
+}
+
+/*
+ * handle normal device IRQs
+ */
+asmlinkage void do_IRQ(void)
+{
+ unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw;
+ int irq;
+
+ sp = current_stack_pointer();
+ if (sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN)
+ BUG();
+
+ /* make sure local_irq_enable() doesn't muck up the interrupt priority
+ * setting in EPSW */
+ old_irq_enabled_epsw = __mn10300_irq_enabled_epsw;
+ local_save_flags(epsw);
+ __mn10300_irq_enabled_epsw = EPSW_IE | (EPSW_IM & epsw);
+ irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL;
+
+ __IRQ_STAT(smp_processor_id(), __irq_count)++;
+
+ irq_enter();
+
+ for (;;) {
+ /* ask the interrupt controller for the next IRQ to process
+ * - the result we get depends on EPSW.IM
+ */
+ irq = IAGR & IAGR_GN;
+ if (!irq)
+ break;
+
+ local_irq_restore(irq_disabled_epsw);
+
+ generic_handle_irq(irq >> 2);
+
+ /* restore IRQ controls for IAGR access */
+ local_irq_restore(epsw);
+ }
+
+ __mn10300_irq_enabled_epsw = old_irq_enabled_epsw;
+
+ irq_exit();
+}
+
+/*
+ * Display interrupt management information through /proc/interrupts
+ */
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, j, cpu;
+ struct irqaction *action;
+ unsigned long flags;
+
+ switch (i) {
+ /* display column title bar naming CPUs */
+ case 0:
+ seq_printf(p, " ");
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "CPU%d ", j);
+ seq_putc(p, '\n');
+ break;
+
+ /* display information rows, one per active CPU */
+ case 1 ... NR_IRQS - 1:
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+
+ action = irq_desc[i].action;
+ if (action) {
+ seq_printf(p, "%3d: ", i);
+ for_each_present_cpu(cpu)
+ seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+ seq_printf(p, " %14s.%u", irq_desc[i].chip->name,
+ (GxICR(i) & GxICR_LEVEL) >>
+ GxICR_LEVEL_SHIFT);
+ seq_printf(p, " %s", action->name);
+
+ for (action = action->next;
+ action;
+ action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+ }
+
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ break;
+
+ /* polish off with NMI and error counters */
+ case NR_IRQS:
+ seq_printf(p, "NMI: ");
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "%10u ", nmi_count(j));
+ seq_putc(p, '\n');
+
+ seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+ break;
+ }
+
+ return 0;
+}
diff --git a/arch/mn10300/kernel/kernel_execve.S b/arch/mn10300/kernel/kernel_execve.S
new file mode 100644
index 0000000..86039f1
--- /dev/null
+++ b/arch/mn10300/kernel/kernel_execve.S
@@ -0,0 +1,37 @@
+/* MN10300 In-kernel program execution
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+
+###############################################################################
+#
+# Do a system call from kernel instead of calling sys_execve so we end up with
+# proper pt_regs.
+#
+# int kernel_execve(const char *filename, char *const argv[],
+# char *const envp[])
+#
+# On entry: D0/D1/8(SP): arguments to function
+# On return: D0: syscall return.
+#
+###############################################################################
+ .globl kernel_execve
+ .type kernel_execve,@function
+kernel_execve:
+ mov a3,a1
+ mov d0,a0
+ mov (12,sp),a3
+ mov +__NR_execve,d0
+ syscall 0
+ mov a1,a3
+ rets
+
+ .size kernel_execve,.-kernel_execve
diff --git a/arch/mn10300/kernel/kprobes.c b/arch/mn10300/kernel/kprobes.c
new file mode 100644
index 0000000..dacafab
--- /dev/null
+++ b/arch/mn10300/kernel/kprobes.c
@@ -0,0 +1,653 @@
+/* MN10300 Kernel probes implementation
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+#include <linux/spinlock.h>
+#include <linux/preempt.h>
+#include <linux/kdebug.h>
+#include <asm/cacheflush.h>
+
+struct kretprobe_blackpoint kretprobe_blacklist[] = { { NULL, NULL } };
+const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist);
+
+/* kprobe_status settings */
+#define KPROBE_HIT_ACTIVE 0x00000001
+#define KPROBE_HIT_SS 0x00000002
+
+static struct kprobe *current_kprobe;
+static unsigned long current_kprobe_orig_pc;
+static unsigned long current_kprobe_next_pc;
+static int current_kprobe_ss_flags;
+static unsigned long kprobe_status;
+static kprobe_opcode_t current_kprobe_ss_buf[MAX_INSN_SIZE + 2];
+static unsigned long current_kprobe_bp_addr;
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+
+
+/* singlestep flag bits */
+#define SINGLESTEP_BRANCH 1
+#define SINGLESTEP_PCREL 2
+
+#define READ_BYTE(p, valp) \
+ do { *(u8 *)(valp) = *(u8 *)(p); } while (0)
+
+#define READ_WORD16(p, valp) \
+ do { \
+ READ_BYTE((p), (valp)); \
+ READ_BYTE((u8 *)(p) + 1, (u8 *)(valp) + 1); \
+ } while (0)
+
+#define READ_WORD32(p, valp) \
+ do { \
+ READ_BYTE((p), (valp)); \
+ READ_BYTE((u8 *)(p) + 1, (u8 *)(valp) + 1); \
+ READ_BYTE((u8 *)(p) + 2, (u8 *)(valp) + 2); \
+ READ_BYTE((u8 *)(p) + 3, (u8 *)(valp) + 3); \
+ } while (0)
+
+
+static const u8 mn10300_insn_sizes[256] =
+{
+ /* 1 2 3 4 5 6 7 8 9 a b c d e f */
+ 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */
+ 2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */
+ 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */
+ 0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1 /* f */
+};
+
+#define LT (1 << 0)
+#define GT (1 << 1)
+#define GE (1 << 2)
+#define LE (1 << 3)
+#define CS (1 << 4)
+#define HI (1 << 5)
+#define CC (1 << 6)
+#define LS (1 << 7)
+#define EQ (1 << 8)
+#define NE (1 << 9)
+#define RA (1 << 10)
+#define VC (1 << 11)
+#define VS (1 << 12)
+#define NC (1 << 13)
+#define NS (1 << 14)
+
+static const u16 cond_table[] = {
+ /* V C N Z */
+ /* 0 0 0 0 */ (NE | NC | CC | VC | GE | GT | HI),
+ /* 0 0 0 1 */ (EQ | NC | CC | VC | GE | LE | LS),
+ /* 0 0 1 0 */ (NE | NS | CC | VC | LT | LE | HI),
+ /* 0 0 1 1 */ (EQ | NS | CC | VC | LT | LE | LS),
+ /* 0 1 0 0 */ (NE | NC | CS | VC | GE | GT | LS),
+ /* 0 1 0 1 */ (EQ | NC | CS | VC | GE | LE | LS),
+ /* 0 1 1 0 */ (NE | NS | CS | VC | LT | LE | LS),
+ /* 0 1 1 1 */ (EQ | NS | CS | VC | LT | LE | LS),
+ /* 1 0 0 0 */ (NE | NC | CC | VS | LT | LE | HI),
+ /* 1 0 0 1 */ (EQ | NC | CC | VS | LT | LE | LS),
+ /* 1 0 1 0 */ (NE | NS | CC | VS | GE | GT | HI),
+ /* 1 0 1 1 */ (EQ | NS | CC | VS | GE | LE | LS),
+ /* 1 1 0 0 */ (NE | NC | CS | VS | LT | LE | LS),
+ /* 1 1 0 1 */ (EQ | NC | CS | VS | LT | LE | LS),
+ /* 1 1 1 0 */ (NE | NS | CS | VS | GE | GT | LS),
+ /* 1 1 1 1 */ (EQ | NS | CS | VS | GE | LE | LS),
+};
+
+/*
+ * Calculate what the PC will be after executing next instruction
+ */
+static unsigned find_nextpc(struct pt_regs *regs, int *flags)
+{
+ unsigned size;
+ s8 x8;
+ s16 x16;
+ s32 x32;
+ u8 opc, *pc, *sp, *next;
+
+ next = 0;
+ *flags = SINGLESTEP_PCREL;
+
+ pc = (u8 *) regs->pc;
+ sp = (u8 *) (regs + 1);
+ opc = *pc;
+
+ size = mn10300_insn_sizes[opc];
+ if (size > 0) {
+ next = pc + size;
+ } else {
+ switch (opc) {
+ /* Bxx (d8,PC) */
+ case 0xc0 ... 0xca:
+ x8 = 2;
+ if (cond_table[regs->epsw & 0xf] & (1 << (opc & 0xf)))
+ x8 = (s8)pc[1];
+ next = pc + x8;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* JMP (d16,PC) or CALL (d16,PC) */
+ case 0xcc:
+ case 0xcd:
+ READ_WORD16(pc + 1, &x16);
+ next = pc + x16;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* JMP (d32,PC) or CALL (d32,PC) */
+ case 0xdc:
+ case 0xdd:
+ READ_WORD32(pc + 1, &x32);
+ next = pc + x32;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* RETF */
+ case 0xde:
+ next = (u8 *)regs->mdr;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* RET */
+ case 0xdf:
+ sp += pc[2];
+ READ_WORD32(sp, &x32);
+ next = (u8 *)x32;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ case 0xf0:
+ next = pc + 2;
+ opc = pc[1];
+ if (opc >= 0xf0 && opc <= 0xf7) {
+ /* JMP (An) / CALLS (An) */
+ switch (opc & 3) {
+ case 0:
+ next = (u8 *)regs->a0;
+ break;
+ case 1:
+ next = (u8 *)regs->a1;
+ break;
+ case 2:
+ next = (u8 *)regs->a2;
+ break;
+ case 3:
+ next = (u8 *)regs->a3;
+ break;
+ }
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ } else if (opc == 0xfc) {
+ /* RETS */
+ READ_WORD32(sp, &x32);
+ next = (u8 *)x32;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ } else if (opc == 0xfd) {
+ /* RTI */
+ READ_WORD32(sp + 4, &x32);
+ next = (u8 *)x32;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ }
+ break;
+
+ /* potential 3-byte conditional branches */
+ case 0xf8:
+ next = pc + 3;
+ opc = pc[1];
+ if (opc >= 0xe8 && opc <= 0xeb &&
+ (cond_table[regs->epsw & 0xf] &
+ (1 << ((opc & 0xf) + 3)))
+ ) {
+ READ_BYTE(pc+2, &x8);
+ next = pc + x8;
+ *flags |= SINGLESTEP_BRANCH;
+ }
+ break;
+
+ case 0xfa:
+ if (pc[1] == 0xff) {
+ /* CALLS (d16,PC) */
+ READ_WORD16(pc + 2, &x16);
+ next = pc + x16;
+ } else
+ next = pc + 4;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ case 0xfc:
+ x32 = 6;
+ if (pc[1] == 0xff) {
+ /* CALLS (d32,PC) */
+ READ_WORD32(pc + 2, &x32);
+ }
+ next = pc + x32;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+ /* LXX (d8,PC) */
+ /* SETLB - loads the next four bytes into the LIR reg */
+ case 0xd0 ... 0xda:
+ case 0xdb:
+ panic("Can't singlestep Lxx/SETLB\n");
+ break;
+ }
+ }
+ return (unsigned)next;
+
+}
+
+/*
+ * set up out of place singlestep of some branching instructions
+ */
+static unsigned __kprobes singlestep_branch_setup(struct pt_regs *regs)
+{
+ u8 opc, *pc, *sp, *next;
+
+ next = NULL;
+ pc = (u8 *) regs->pc;
+ sp = (u8 *) (regs + 1);
+
+ switch (pc[0]) {
+ case 0xc0 ... 0xca: /* Bxx (d8,PC) */
+ case 0xcc: /* JMP (d16,PC) */
+ case 0xdc: /* JMP (d32,PC) */
+ case 0xf8: /* Bxx (d8,PC) 3-byte version */
+ /* don't really need to do anything except cause trap */
+ next = pc;
+ break;
+
+ case 0xcd: /* CALL (d16,PC) */
+ pc[1] = 5;
+ pc[2] = 0;
+ next = pc + 5;
+ break;
+
+ case 0xdd: /* CALL (d32,PC) */
+ pc[1] = 7;
+ pc[2] = 0;
+ pc[3] = 0;
+ pc[4] = 0;
+ next = pc + 7;
+ break;
+
+ case 0xde: /* RETF */
+ next = pc + 3;
+ regs->mdr = (unsigned) next;
+ break;
+
+ case 0xdf: /* RET */
+ sp += pc[2];
+ next = pc + 3;
+ *(unsigned *)sp = (unsigned) next;
+ break;
+
+ case 0xf0:
+ next = pc + 2;
+ opc = pc[1];
+ if (opc >= 0xf0 && opc <= 0xf3) {
+ /* CALLS (An) */
+ /* use CALLS (d16,PC) to avoid mucking with An */
+ pc[0] = 0xfa;
+ pc[1] = 0xff;
+ pc[2] = 4;
+ pc[3] = 0;
+ next = pc + 4;
+ } else if (opc >= 0xf4 && opc <= 0xf7) {
+ /* JMP (An) */
+ next = pc;
+ } else if (opc == 0xfc) {
+ /* RETS */
+ next = pc + 2;
+ *(unsigned *) sp = (unsigned) next;
+ } else if (opc == 0xfd) {
+ /* RTI */
+ next = pc + 2;
+ *(unsigned *)(sp + 4) = (unsigned) next;
+ }
+ break;
+
+ case 0xfa: /* CALLS (d16,PC) */
+ pc[2] = 4;
+ pc[3] = 0;
+ next = pc + 4;
+ break;
+
+ case 0xfc: /* CALLS (d32,PC) */
+ pc[2] = 6;
+ pc[3] = 0;
+ pc[4] = 0;
+ pc[5] = 0;
+ next = pc + 6;
+ break;
+
+ case 0xd0 ... 0xda: /* LXX (d8,PC) */
+ case 0xdb: /* SETLB */
+ panic("Can't singlestep Lxx/SETLB\n");
+ }
+
+ return (unsigned) next;
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+ return 0;
+}
+
+void __kprobes arch_copy_kprobe(struct kprobe *p)
+{
+ memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE);
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+ *p->addr = BREAKPOINT_INSTRUCTION;
+ flush_icache_range((unsigned long) p->addr,
+ (unsigned long) p->addr + sizeof(kprobe_opcode_t));
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+ mn10300_dcache_flush();
+ mn10300_icache_inv();
+}
+
+void arch_remove_kprobe(struct kprobe *p)
+{
+}
+
+static inline
+void __kprobes disarm_kprobe(struct kprobe *p, struct pt_regs *regs)
+{
+ *p->addr = p->opcode;
+ regs->pc = (unsigned long) p->addr;
+ mn10300_dcache_flush();
+ mn10300_icache_inv();
+}
+
+static inline
+void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+ unsigned long nextpc;
+
+ current_kprobe_orig_pc = regs->pc;
+ memcpy(current_kprobe_ss_buf, &p->ainsn.insn[0], MAX_INSN_SIZE);
+ regs->pc = (unsigned long) current_kprobe_ss_buf;
+
+ nextpc = find_nextpc(regs, ¤t_kprobe_ss_flags);
+ if (current_kprobe_ss_flags & SINGLESTEP_PCREL)
+ current_kprobe_next_pc =
+ current_kprobe_orig_pc + (nextpc - regs->pc);
+ else
+ current_kprobe_next_pc = nextpc;
+
+ /* branching instructions need special handling */
+ if (current_kprobe_ss_flags & SINGLESTEP_BRANCH)
+ nextpc = singlestep_branch_setup(regs);
+
+ current_kprobe_bp_addr = nextpc;
+
+ *(u8 *) nextpc = BREAKPOINT_INSTRUCTION;
+ mn10300_dcache_flush_range2((unsigned) current_kprobe_ss_buf,
+ sizeof(current_kprobe_ss_buf));
+ mn10300_icache_inv();
+}
+
+static inline int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *p;
+ int ret = 0;
+ unsigned int *addr = (unsigned int *) regs->pc;
+
+ /* We're in an interrupt, but this is clear and BUG()-safe. */
+ preempt_disable();
+
+ /* Check we're not actually recursing */
+ if (kprobe_running()) {
+ /* We *are* holding lock here, so this is safe.
+ Disarm the probe we just hit, and ignore it. */
+ p = get_kprobe(addr);
+ if (p) {
+ disarm_kprobe(p, regs);
+ ret = 1;
+ } else {
+ p = current_kprobe;
+ if (p->break_handler && p->break_handler(p, regs))
+ goto ss_probe;
+ }
+ /* If it's not ours, can't be delete race, (we hold lock). */
+ goto no_kprobe;
+ }
+
+ p = get_kprobe(addr);
+ if (!p) {
+ if (*addr != BREAKPOINT_INSTRUCTION) {
+ /* The breakpoint instruction was removed right after
+ * we hit it. Another cpu has removed either a
+ * probepoint or a debugger breakpoint at this address.
+ * In either case, no further handling of this
+ * interrupt is appropriate.
+ */
+ ret = 1;
+ }
+ /* Not one of ours: let kernel handle it */
+ goto no_kprobe;
+ }
+
+ kprobe_status = KPROBE_HIT_ACTIVE;
+ current_kprobe = p;
+ if (p->pre_handler(p, regs)) {
+ /* handler has already set things up, so skip ss setup */
+ return 1;
+ }
+
+ss_probe:
+ prepare_singlestep(p, regs);
+ kprobe_status = KPROBE_HIT_SS;
+ return 1;
+
+no_kprobe:
+ preempt_enable_no_resched();
+ return ret;
+}
+
+/*
+ * Called after single-stepping. p->addr is the address of the
+ * instruction whose first byte has been replaced by the "breakpoint"
+ * instruction. To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction. The address of this
+ * copy is p->ainsn.insn.
+ */
+static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
+{
+ /* we may need to fixup regs/stack after singlestepping a call insn */
+ if (current_kprobe_ss_flags & SINGLESTEP_BRANCH) {
+ regs->pc = current_kprobe_orig_pc;
+ switch (p->ainsn.insn[0]) {
+ case 0xcd: /* CALL (d16,PC) */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 5;
+ break;
+ case 0xdd: /* CALL (d32,PC) */
+ /* fixup mdr and return address on stack */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 7;
+ break;
+ case 0xf0:
+ if (p->ainsn.insn[1] >= 0xf0 &&
+ p->ainsn.insn[1] <= 0xf3) {
+ /* CALLS (An) */
+ /* fixup MDR and return address on stack */
+ regs->mdr = regs->pc + 2;
+ *(unsigned *) regs->sp = regs->mdr;
+ }
+ break;
+
+ case 0xfa: /* CALLS (d16,PC) */
+ /* fixup MDR and return address on stack */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 4;
+ break;
+
+ case 0xfc: /* CALLS (d32,PC) */
+ /* fixup MDR and return address on stack */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 6;
+ break;
+ }
+ }
+
+ regs->pc = current_kprobe_next_pc;
+ current_kprobe_bp_addr = 0;
+}
+
+static inline int __kprobes post_kprobe_handler(struct pt_regs *regs)
+{
+ if (!kprobe_running())
+ return 0;
+
+ if (current_kprobe->post_handler)
+ current_kprobe->post_handler(current_kprobe, regs, 0);
+
+ resume_execution(current_kprobe, regs);
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ return 1;
+}
+
+/* Interrupts disabled, kprobe_lock held. */
+static inline
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+ if (current_kprobe->fault_handler &&
+ current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+ return 1;
+
+ if (kprobe_status & KPROBE_HIT_SS) {
+ resume_execution(current_kprobe, regs);
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ }
+ return 0;
+}
+
+/*
+ * Wrapper routine to for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ struct die_args *args = data;
+
+ switch (val) {
+ case DIE_BREAKPOINT:
+ if (current_kprobe_bp_addr != args->regs->pc) {
+ if (kprobe_handler(args->regs))
+ return NOTIFY_STOP;
+ } else {
+ if (post_kprobe_handler(args->regs))
+ return NOTIFY_STOP;
+ }
+ break;
+ case DIE_GPF:
+ if (kprobe_running() &&
+ kprobe_fault_handler(args->regs, args->trapnr))
+ return NOTIFY_STOP;
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+/* Jprobes support. */
+static struct pt_regs jprobe_saved_regs;
+static struct pt_regs *jprobe_saved_regs_location;
+static kprobe_opcode_t jprobe_saved_stack[MAX_STACK_SIZE];
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+ jprobe_saved_regs_location = regs;
+ memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs));
+
+ /* Save a whole stack frame, this gets arguments
+ * pushed onto the stack after using up all the
+ * arg registers.
+ */
+ memcpy(&jprobe_saved_stack, regs + 1, sizeof(jprobe_saved_stack));
+
+ /* setup return addr to the jprobe handler routine */
+ regs->pc = (unsigned long) jp->entry;
+ return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+ void *orig_sp = jprobe_saved_regs_location + 1;
+
+ preempt_enable_no_resched();
+ asm volatile(" mov %0,sp\n"
+ ".globl jprobe_return_bp_addr\n"
+ "jprobe_return_bp_addr:\n\t"
+ " .byte 0xff\n"
+ : : "d" (orig_sp));
+}
+
+extern void jprobe_return_bp_addr(void);
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ u8 *addr = (u8 *) regs->pc;
+
+ if (addr == (u8 *) jprobe_return_bp_addr) {
+ if (jprobe_saved_regs_location != regs) {
+ printk(KERN_ERR"JPROBE:"
+ " Current regs (%p) does not match saved regs"
+ " (%p).\n",
+ regs, jprobe_saved_regs_location);
+ BUG();
+ }
+
+ /* Restore old register state.
+ */
+ memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs));
+
+ memcpy(regs + 1, &jprobe_saved_stack,
+ sizeof(jprobe_saved_stack));
+ return 1;
+ }
+ return 0;
+}
+
+int __init arch_init_kprobes(void)
+{
+ return 0;
+}
diff --git a/arch/mn10300/kernel/kthread.S b/arch/mn10300/kernel/kthread.S
new file mode 100644
index 0000000..b5ae467
--- /dev/null
+++ b/arch/mn10300/kernel/kthread.S
@@ -0,0 +1,31 @@
+/* MN10300 Kernel thread trampoline function
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+ .text
+
+###############################################################################
+#
+# kernel_thread_helper - trampoline for kernel_thread()
+#
+# On entry:
+# A2 = address of function to call
+# D2 = function argument
+#
+###############################################################################
+ .globl kernel_thread_helper
+ .type kernel_thread_helper,@function
+kernel_thread_helper:
+ mov do_exit,d1
+ mov d1,(sp)
+ mov d1,mdr
+ mov d2,d0
+ jmp (a2)
+
+ .size kernel_thread_helper,.-kernel_thread_helper
diff --git a/arch/mn10300/kernel/mn10300-debug.c b/arch/mn10300/kernel/mn10300-debug.c
new file mode 100644
index 0000000..bd81964
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-debug.c
@@ -0,0 +1,58 @@
+/* Debugging stuff for the MN10300-based processors
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <asm/serial-regs.h>
+
+#undef MN10300_CONSOLE_ON_SERIO
+
+/*
+ * write a string directly through one of the serial ports on-board the MN10300
+ */
+#ifdef MN10300_CONSOLE_ON_SERIO
+void debug_to_serial_mnser(const char *p, int n)
+{
+ char ch;
+
+ for (; n > 0; n--) {
+ ch = *p++;
+
+#if MN10300_CONSOLE_ON_SERIO == 0
+ while (SC0STR & (SC01STR_TBF)) continue;
+ SC0TXB = ch;
+ while (SC0STR & (SC01STR_TBF)) continue;
+ if (ch == 0x0a) {
+ SC0TXB = 0x0d;
+ while (SC0STR & (SC01STR_TBF)) continue;
+ }
+
+#elif MN10300_CONSOLE_ON_SERIO == 1
+ while (SC1STR & (SC01STR_TBF)) continue;
+ SC1TXB = ch;
+ while (SC1STR & (SC01STR_TBF)) continue;
+ if (ch == 0x0a) {
+ SC1TXB = 0x0d;
+ while (SC1STR & (SC01STR_TBF)) continue;
+ }
+
+#elif MN10300_CONSOLE_ON_SERIO == 2
+ while (SC2STR & (SC2STR_TBF)) continue;
+ SC2TXB = ch;
+ while (SC2STR & (SC2STR_TBF)) continue;
+ if (ch == 0x0a) {
+ SC2TXB = 0x0d;
+ while (SC2STR & (SC2STR_TBF)) continue;
+ }
+
+#endif
+ }
+}
+#endif
+
diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S
new file mode 100644
index 0000000..ef3f4c1
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-serial-low.S
@@ -0,0 +1,191 @@
+###############################################################################
+#
+# Virtual DMA driver for MN10300 serial ports
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/smp.h>
+#include <asm/cpu-regs.h>
+#include <asm/frame.inc>
+#include <asm/timer-regs.h>
+#include <asm/proc/cache.h>
+#include <asm/unit/timex.h>
+#include "mn10300-serial.h"
+
+#define SCxCTR 0x00
+#define SCxICR 0x04
+#define SCxTXB 0x08
+#define SCxRXB 0x09
+#define SCxSTR 0x0c
+#define SCxTIM 0x0d
+
+ .text
+
+###############################################################################
+#
+# serial port interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+#
+###############################################################################
+ .balign L1_CACHE_BYTES
+ENTRY(mn10300_serial_vdma_interrupt)
+ or EPSW_IE,psw # permit overriding by
+ # debugging interrupts
+ movm [d2,d3,a2,a3,exreg0],(sp)
+
+ movhu (IAGR),a2 # see if which interrupt is
+ # pending
+ and IAGR_GN,a2
+ add a2,a2
+ add mn10300_serial_int_tbl,a2
+
+ mov (a2+),a3
+ mov (__iobase,a3),e2
+ mov (a2),a2
+ jmp (a2)
+
+###############################################################################
+#
+# serial port receive interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+# - stores data/status byte pairs in the ring buffer
+# - induces a scheduler tick timer interrupt when done, which we then subvert
+# on entry:
+# A3 struct mn10300_serial_port *
+# E2 I/O port base
+#
+###############################################################################
+ENTRY(mn10300_serial_vdma_rx_handler)
+ mov (__rx_icr,a3),e3
+ mov GxICR_DETECT,d2
+ movbu d2,(e3) # ACK the interrupt
+ movhu (e3),d2 # flush
+
+ mov (__rx_inp,a3),d3
+ mov d3,a2
+ add 2,d3
+ and MNSC_BUFFER_SIZE-1,d3
+ mov (__rx_outp,a3),d2
+ cmp d3,d2
+ beq mnsc_vdma_rx_overflow
+
+ mov (__rx_buffer,a3),d2
+ add d2,a2
+ movhu (SCxSTR,e2),d2
+ movbu d2,(1,a2)
+ movbu (SCxRXB,e2),d2
+ movbu d2,(a2)
+ mov d3,(__rx_inp,a3)
+ bset MNSCx_RX_AVAIL,(__intr_flags,a3)
+
+mnsc_vdma_rx_done:
+ mov (__tm_icr,a3),a2
+ mov GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2
+ movhu d2,(a2) # request a slow interrupt
+ movhu (a2),d2 # flush
+
+ movm (sp),[d2,d3,a2,a3,exreg0]
+ rti
+
+mnsc_vdma_rx_overflow:
+ bset MNSCx_RX_OVERF,(__intr_flags,a3)
+ bra mnsc_vdma_rx_done
+
+###############################################################################
+#
+# serial port transmit interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+# - retrieves data bytes from the ring buffer and passes them to the serial port
+# - induces a scheduler tick timer interrupt when done, which we then subvert
+# A3 struct mn10300_serial_port *
+# E2 I/O port base
+#
+###############################################################################
+ .balign L1_CACHE_BYTES
+ENTRY(mn10300_serial_vdma_tx_handler)
+ mov (__tx_icr,a3),e3
+ mov GxICR_DETECT,d2
+ movbu d2,(e3) # ACK the interrupt
+ movhu (e3),d2 # flush
+
+ btst 0x01,(__tx_break,a3) # handle transmit break request
+ bne mnsc_vdma_tx_break
+
+ movbu (SCxSTR,e2),d2 # don't try and transmit a char if the
+ # buffer is not empty
+ btst SC01STR_TBF,d2 # (may have tried to jumpstart)
+ bne mnsc_vdma_tx_noint
+
+ movbu (__tx_xchar,a3),d2 # handle hi-pri XON/XOFF
+ or d2,d2
+ bne mnsc_vdma_tx_xchar
+
+ mov (__tx_info_buffer,a3),a2 # get the uart_info struct for Tx
+ mov (__xmit_tail,a2),d3
+ mov (__xmit_head,a2),d2
+ cmp d3,d2
+ beq mnsc_vdma_tx_empty
+
+ mov (__xmit_buffer,a2),d2 # get a char from the buffer and
+ # transmit it
+ movbu (d3,d2),d2
+ movbu d2,(SCxTXB,e2) # Tx
+
+ inc d3 # advance the buffer pointer
+ and __UART_XMIT_SIZE-1,d3
+ mov (__xmit_head,a2),d2
+ mov d3,(__xmit_tail,a2)
+
+ sub d3,d2 # see if we've written everything
+ beq mnsc_vdma_tx_empty
+
+ and __UART_XMIT_SIZE-1,d2 # see if we just made a hole
+ cmp __UART_XMIT_SIZE-2,d2
+ beq mnsc_vdma_tx_made_hole
+
+mnsc_vdma_tx_done:
+ mov (__tm_icr,a3),a2
+ mov GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2
+ movhu d2,(a2) # request a slow interrupt
+ movhu (a2),d2 # flush
+
+mnsc_vdma_tx_noint:
+ movm (sp),[d2,d3,a2,a3,exreg0]
+ rti
+
+mnsc_vdma_tx_empty:
+ mov +(GxICR_LEVEL_1|GxICR_DETECT),d2
+ movhu d2,(e3) # disable the interrupt
+ movhu (e3),d2 # flush
+
+ bset MNSCx_TX_EMPTY,(__intr_flags,a3)
+ bra mnsc_vdma_tx_done
+
+mnsc_vdma_tx_break:
+ movhu (SCxCTR,e2),d2 # turn on break mode
+ or SC01CTR_BKE,d2
+ movhu d2,(SCxCTR,e2)
+ mov +(GxICR_LEVEL_1|GxICR_DETECT),d2
+ movhu d2,(e3) # disable transmit interrupts on this
+ # channel
+ movhu (e3),d2 # flush
+ bra mnsc_vdma_tx_noint
+
+mnsc_vdma_tx_xchar:
+ bclr 0xff,(__tx_xchar,a3)
+ movbu d2,(SCxTXB,e2)
+ bra mnsc_vdma_tx_done
+
+mnsc_vdma_tx_made_hole:
+ bset MNSCx_TX_SPACE,(__intr_flags,a3)
+ bra mnsc_vdma_tx_done
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
new file mode 100644
index 0000000..b9c268c
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -0,0 +1,1480 @@
+/* MN10300 On-chip serial port UART driver
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+static const char serial_name[] = "MN10300 Serial driver";
+static const char serial_version[] = "mn10300_serial-1.0";
+static const char serial_revdate[] = "2007-11-06";
+
+#if defined(CONFIG_MN10300_TTYSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/circ_buf.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/bitops.h>
+#include <asm/serial-regs.h>
+#include <asm/unit/timex.h>
+#include "mn10300-serial.h"
+
+static inline __attribute__((format(printf, 1, 2)))
+void no_printk(const char *fmt, ...)
+{
+}
+
+#define kenter(FMT, ...) \
+ printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
+#define _enter(FMT, ...) \
+ no_printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
+#define kdebug(FMT, ...) \
+ printk(KERN_DEBUG "--- " FMT "\n", ##__VA_ARGS__)
+#define _debug(FMT, ...) \
+ no_printk(KERN_DEBUG "--- " FMT "\n", ##__VA_ARGS__)
+#define kproto(FMT, ...) \
+ printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__)
+#define _proto(FMT, ...) \
+ no_printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__)
+
+#define NR_UARTS 3
+
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+static void mn10300_serial_console_write(struct console *co,
+ const char *s, unsigned count);
+static int __init mn10300_serial_console_setup(struct console *co,
+ char *options);
+
+static struct uart_driver mn10300_serial_driver;
+static struct console mn10300_serial_console = {
+ .name = "ttySM",
+ .write = mn10300_serial_console_write,
+ .device = uart_console_device,
+ .setup = mn10300_serial_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &mn10300_serial_driver,
+};
+#endif
+
+static struct uart_driver mn10300_serial_driver = {
+ .owner = NULL,
+ .driver_name = "mn10300-serial",
+ .dev_name = "ttySM",
+ .major = TTY_MAJOR,
+ .minor = 128,
+ .nr = NR_UARTS,
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+ .cons = &mn10300_serial_console,
+#endif
+};
+
+static unsigned int mn10300_serial_tx_empty(struct uart_port *);
+static void mn10300_serial_set_mctrl(struct uart_port *, unsigned int mctrl);
+static unsigned int mn10300_serial_get_mctrl(struct uart_port *);
+static void mn10300_serial_stop_tx(struct uart_port *);
+static void mn10300_serial_start_tx(struct uart_port *);
+static void mn10300_serial_send_xchar(struct uart_port *, char ch);
+static void mn10300_serial_stop_rx(struct uart_port *);
+static void mn10300_serial_enable_ms(struct uart_port *);
+static void mn10300_serial_break_ctl(struct uart_port *, int ctl);
+static int mn10300_serial_startup(struct uart_port *);
+static void mn10300_serial_shutdown(struct uart_port *);
+static void mn10300_serial_set_termios(struct uart_port *,
+ struct ktermios *new,
+ struct ktermios *old);
+static const char *mn10300_serial_type(struct uart_port *);
+static void mn10300_serial_release_port(struct uart_port *);
+static int mn10300_serial_request_port(struct uart_port *);
+static void mn10300_serial_config_port(struct uart_port *, int);
+static int mn10300_serial_verify_port(struct uart_port *,
+ struct serial_struct *);
+
+static const struct uart_ops mn10300_serial_ops = {
+ .tx_empty = mn10300_serial_tx_empty,
+ .set_mctrl = mn10300_serial_set_mctrl,
+ .get_mctrl = mn10300_serial_get_mctrl,
+ .stop_tx = mn10300_serial_stop_tx,
+ .start_tx = mn10300_serial_start_tx,
+ .send_xchar = mn10300_serial_send_xchar,
+ .stop_rx = mn10300_serial_stop_rx,
+ .enable_ms = mn10300_serial_enable_ms,
+ .break_ctl = mn10300_serial_break_ctl,
+ .startup = mn10300_serial_startup,
+ .shutdown = mn10300_serial_shutdown,
+ .set_termios = mn10300_serial_set_termios,
+ .type = mn10300_serial_type,
+ .release_port = mn10300_serial_release_port,
+ .request_port = mn10300_serial_request_port,
+ .config_port = mn10300_serial_config_port,
+ .verify_port = mn10300_serial_verify_port,
+};
+
+static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id);
+
+/*
+ * the first on-chip serial port: ttySM0 (aka SIF0)
+ */
+#ifdef CONFIG_MN10300_TTYSM0
+struct mn10300_serial_port mn10300_serial_port_sif0 = {
+ .uart.ops = &mn10300_serial_ops,
+ .uart.membase = (void __iomem *) &SC0CTR,
+ .uart.mapbase = (unsigned long) &SC0CTR,
+ .uart.iotype = UPIO_MEM,
+ .uart.irq = 0,
+ .uart.uartclk = 0, /* MN10300_IOCLK, */
+ .uart.fifosize = 1,
+ .uart.flags = UPF_BOOT_AUTOCONF,
+ .uart.line = 0,
+ .uart.type = PORT_MN10300,
+ .uart.lock =
+ __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif0.uart.lock),
+ .name = "ttySM0",
+ ._iobase = &SC0CTR,
+ ._control = &SC0CTR,
+ ._status = (volatile u8 *) &SC0STR,
+ ._intr = &SC0ICR,
+ ._rxb = &SC0RXB,
+ ._txb = &SC0TXB,
+ .rx_name = "ttySM0/Rx",
+ .tx_name = "ttySM0/Tx",
+#ifdef CONFIG_MN10300_TTYSM0_TIMER8
+ .tm_name = "ttySM0/Timer8",
+ ._tmxmd = &TM8MD,
+ ._tmxbr = &TM8BR,
+ ._tmicr = &TM8ICR,
+ .tm_irq = TM8IRQ,
+ .div_timer = MNSCx_DIV_TIMER_16BIT,
+#else /* CONFIG_MN10300_TTYSM0_TIMER2 */
+ .tm_name = "ttySM0/Timer2",
+ ._tmxmd = &TM2MD,
+ ._tmxbr = (volatile u16 *) &TM2BR,
+ ._tmicr = &TM2ICR,
+ .tm_irq = TM2IRQ,
+ .div_timer = MNSCx_DIV_TIMER_8BIT,
+#endif
+ .rx_irq = SC0RXIRQ,
+ .tx_irq = SC0TXIRQ,
+ .rx_icr = &GxICR(SC0RXIRQ),
+ .tx_icr = &GxICR(SC0TXIRQ),
+ .clock_src = MNSCx_CLOCK_SRC_IOCLK,
+ .options = 0,
+#ifdef CONFIG_GDBSTUB_ON_TTYSM0
+ .gdbstub = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM0 */
+
+/*
+ * the second on-chip serial port: ttySM1 (aka SIF1)
+ */
+#ifdef CONFIG_MN10300_TTYSM1
+struct mn10300_serial_port mn10300_serial_port_sif1 = {
+ .uart.ops = &mn10300_serial_ops,
+ .uart.membase = (void __iomem *) &SC1CTR,
+ .uart.mapbase = (unsigned long) &SC1CTR,
+ .uart.iotype = UPIO_MEM,
+ .uart.irq = 0,
+ .uart.uartclk = 0, /* MN10300_IOCLK, */
+ .uart.fifosize = 1,
+ .uart.flags = UPF_BOOT_AUTOCONF,
+ .uart.line = 1,
+ .uart.type = PORT_MN10300,
+ .uart.lock =
+ __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif1.uart.lock),
+ .name = "ttySM1",
+ ._iobase = &SC1CTR,
+ ._control = &SC1CTR,
+ ._status = (volatile u8 *) &SC1STR,
+ ._intr = &SC1ICR,
+ ._rxb = &SC1RXB,
+ ._txb = &SC1TXB,
+ .rx_name = "ttySM1/Rx",
+ .tx_name = "ttySM1/Tx",
+#ifdef CONFIG_MN10300_TTYSM1_TIMER9
+ .tm_name = "ttySM1/Timer9",
+ ._tmxmd = &TM9MD,
+ ._tmxbr = &TM9BR,
+ ._tmicr = &TM9ICR,
+ .tm_irq = TM9IRQ,
+ .div_timer = MNSCx_DIV_TIMER_16BIT,
+#else /* CONFIG_MN10300_TTYSM1_TIMER3 */
+ .tm_name = "ttySM1/Timer3",
+ ._tmxmd = &TM3MD,
+ ._tmxbr = (volatile u16 *) &TM3BR,
+ ._tmicr = &TM3ICR,
+ .tm_irq = TM3IRQ,
+ .div_timer = MNSCx_DIV_TIMER_8BIT,
+#endif
+ .rx_irq = SC1RXIRQ,
+ .tx_irq = SC1TXIRQ,
+ .rx_icr = &GxICR(SC1RXIRQ),
+ .tx_icr = &GxICR(SC1TXIRQ),
+ .clock_src = MNSCx_CLOCK_SRC_IOCLK,
+ .options = 0,
+#ifdef CONFIG_GDBSTUB_ON_TTYSM1
+ .gdbstub = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM1 */
+
+/*
+ * the third on-chip serial port: ttySM2 (aka SIF2)
+ */
+#ifdef CONFIG_MN10300_TTYSM2
+struct mn10300_serial_port mn10300_serial_port_sif2 = {
+ .uart.ops = &mn10300_serial_ops,
+ .uart.membase = (void __iomem *) &SC2CTR,
+ .uart.mapbase = (unsigned long) &SC2CTR,
+ .uart.iotype = UPIO_MEM,
+ .uart.irq = 0,
+ .uart.uartclk = 0, /* MN10300_IOCLK, */
+ .uart.fifosize = 1,
+ .uart.flags = UPF_BOOT_AUTOCONF,
+ .uart.line = 2,
+#ifdef CONFIG_MN10300_TTYSM2_CTS
+ .uart.type = PORT_MN10300_CTS,
+#else
+ .uart.type = PORT_MN10300,
+#endif
+ .uart.lock =
+ __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock),
+ .name = "ttySM2",
+ .rx_name = "ttySM2/Rx",
+ .tx_name = "ttySM2/Tx",
+ .tm_name = "ttySM2/Timer10",
+ ._iobase = &SC2CTR,
+ ._control = &SC2CTR,
+ ._status = &SC2STR,
+ ._intr = &SC2ICR,
+ ._rxb = &SC2RXB,
+ ._txb = &SC2TXB,
+ ._tmxmd = &TM10MD,
+ ._tmxbr = &TM10BR,
+ ._tmicr = &TM10ICR,
+ .tm_irq = TM10IRQ,
+ .div_timer = MNSCx_DIV_TIMER_16BIT,
+ .rx_irq = SC2RXIRQ,
+ .tx_irq = SC2TXIRQ,
+ .rx_icr = &GxICR(SC2RXIRQ),
+ .tx_icr = &GxICR(SC2TXIRQ),
+ .clock_src = MNSCx_CLOCK_SRC_IOCLK,
+#ifdef CONFIG_MN10300_TTYSM2_CTS
+ .options = MNSCx_OPT_CTS,
+#else
+ .options = 0,
+#endif
+#ifdef CONFIG_GDBSTUB_ON_TTYSM2
+ .gdbstub = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM2 */
+
+
+/*
+ * list of available serial ports
+ */
+struct mn10300_serial_port *mn10300_serial_ports[NR_UARTS + 1] = {
+#ifdef CONFIG_MN10300_TTYSM0
+ [0] = &mn10300_serial_port_sif0,
+#endif
+#ifdef CONFIG_MN10300_TTYSM1
+ [1] = &mn10300_serial_port_sif1,
+#endif
+#ifdef CONFIG_MN10300_TTYSM2
+ [2] = &mn10300_serial_port_sif2,
+#endif
+ [NR_UARTS] = NULL,
+};
+
+
+/*
+ * we abuse the serial ports' baud timers' interrupt lines to get the ability
+ * to deliver interrupts to userspace as we use the ports' interrupt lines to
+ * do virtual DMA on account of the ports having no hardware FIFOs
+ *
+ * we can generate an interrupt manually in the assembly stubs by writing to
+ * the enable and detect bits in the interrupt control register, so all we need
+ * to do here is disable the interrupt line
+ *
+ * note that we can't just leave the line enabled as the baud rate timer *also*
+ * generates interrupts
+ */
+static void mn10300_serial_mask_ack(unsigned int irq)
+{
+ u16 tmp;
+ GxICR(irq) = GxICR_LEVEL_6;
+ tmp = GxICR(irq); /* flush write buffer */
+}
+
+static void mn10300_serial_nop(unsigned int irq)
+{
+}
+
+static struct irq_chip mn10300_serial_pic = {
+ .name = "mnserial",
+ .ack = mn10300_serial_mask_ack,
+ .mask = mn10300_serial_mask_ack,
+ .mask_ack = mn10300_serial_mask_ack,
+ .unmask = mn10300_serial_nop,
+ .end = mn10300_serial_nop,
+};
+
+
+/*
+ * serial virtual DMA interrupt jump table
+ */
+struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS];
+
+static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port)
+{
+ u16 x;
+ *port->tx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
+ x = *port->tx_icr;
+}
+
+static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port)
+{
+ u16 x;
+ *port->tx_icr = GxICR_LEVEL_1 | GxICR_ENABLE;
+ x = *port->tx_icr;
+}
+
+static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port)
+{
+ u16 x;
+ *port->rx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
+ x = *port->rx_icr;
+}
+
+/*
+ * multi-bit equivalent of test_and_clear_bit()
+ */
+static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
+{
+ u32 epsw;
+ asm volatile(" bclr %1,(%2) \n"
+ " mov epsw,%0 \n"
+ : "=d"(epsw) : "d"(mask), "a"(ptr));
+ return !(epsw & EPSW_FLAG_Z);
+}
+
+/*
+ * receive chars from the ring buffer for this serial port
+ * - must do break detection here (not done in the UART)
+ */
+static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
+{
+ struct uart_icount *icount = &port->uart.icount;
+ struct tty_struct *tty = port->uart.info->tty;
+ unsigned ix;
+ int count;
+ u8 st, ch, push, status, overrun;
+
+ _enter("%s", port->name);
+
+ push = 0;
+
+ count = CIRC_CNT(port->rx_inp, port->rx_outp, MNSC_BUFFER_SIZE);
+ count = tty_buffer_request_room(tty, count);
+ if (count == 0) {
+ if (!tty->low_latency)
+ tty_flip_buffer_push(tty);
+ return;
+ }
+
+try_again:
+ /* pull chars out of the hat */
+ ix = port->rx_outp;
+ if (ix == port->rx_inp) {
+ if (push && !tty->low_latency)
+ tty_flip_buffer_push(tty);
+ return;
+ }
+
+ ch = port->rx_buffer[ix++];
+ st = port->rx_buffer[ix++];
+ smp_rmb();
+ port->rx_outp = ix & (MNSC_BUFFER_SIZE - 1);
+ port->uart.icount.rx++;
+
+ st &= SC01STR_FEF | SC01STR_PEF | SC01STR_OEF;
+ status = 0;
+ overrun = 0;
+
+ /* the UART doesn't detect BREAK, so we have to do that ourselves
+ * - it starts as a framing error on a NUL character
+ * - then we count another two NUL characters before issuing TTY_BREAK
+ * - then we end on a normal char or one that has all the bottom bits
+ * zero and the top bits set
+ */
+ switch (port->rx_brk) {
+ case 0:
+ /* not breaking at the moment */
+ break;
+
+ case 1:
+ if (st & SC01STR_FEF && ch == 0) {
+ port->rx_brk = 2;
+ goto try_again;
+ }
+ goto not_break;
+
+ case 2:
+ if (st & SC01STR_FEF && ch == 0) {
+ port->rx_brk = 3;
+ _proto("Rx Break Detected");
+ icount->brk++;
+ if (uart_handle_break(&port->uart))
+ goto ignore_char;
+ status |= 1 << TTY_BREAK;
+ goto insert;
+ }
+ goto not_break;
+
+ default:
+ if (st & (SC01STR_FEF | SC01STR_PEF | SC01STR_OEF))
+ goto try_again; /* still breaking */
+
+ port->rx_brk = 0; /* end of the break */
+
+ switch (ch) {
+ case 0xFF:
+ case 0xFE:
+ case 0xFC:
+ case 0xF8:
+ case 0xF0:
+ case 0xE0:
+ case 0xC0:
+ case 0x80:
+ case 0x00:
+ /* discard char at probable break end */
+ goto try_again;
+ }
+ break;
+ }
+
+process_errors:
+ /* handle framing error */
+ if (st & SC01STR_FEF) {
+ if (ch == 0) {
+ /* framing error with NUL char is probably a BREAK */
+ port->rx_brk = 1;
+ goto try_again;
+ }
+
+ _proto("Rx Framing Error");
+ icount->frame++;
+ status |= 1 << TTY_FRAME;
+ }
+
+ /* handle parity error */
+ if (st & SC01STR_PEF) {
+ _proto("Rx Parity Error");
+ icount->parity++;
+ status = TTY_PARITY;
+ }
+
+ /* handle normal char */
+ if (status == 0) {
+ if (uart_handle_sysrq_char(&port->uart, ch))
+ goto ignore_char;
+ status = (1 << TTY_NORMAL);
+ }
+
+ /* handle overrun error */
+ if (st & SC01STR_OEF) {
+ if (port->rx_brk)
+ goto try_again;
+
+ _proto("Rx Overrun Error");
+ icount->overrun++;
+ overrun = 1;
+ }
+
+insert:
+ status &= port->uart.read_status_mask;
+
+ if (!overrun && !(status & port->uart.ignore_status_mask)) {
+ int flag;
+
+ if (status & (1 << TTY_BREAK))
+ flag = TTY_BREAK;
+ else if (status & (1 << TTY_PARITY))
+ flag = TTY_PARITY;
+ else if (status & (1 << TTY_FRAME))
+ flag = TTY_FRAME;
+ else
+ flag = TTY_NORMAL;
+
+ tty_insert_flip_char(tty, ch, flag);
+ }
+
+ /* overrun is special, since it's reported immediately, and doesn't
+ * affect the current character
+ */
+ if (overrun)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ count--;
+ if (count <= 0) {
+ if (!tty->low_latency)
+ tty_flip_buffer_push(tty);
+ return;
+ }
+
+ignore_char:
+ push = 1;
+ goto try_again;
+
+not_break:
+ port->rx_brk = 0;
+ goto process_errors;
+}
+
+/*
+ * handle an interrupt from the serial transmission "virtual DMA" driver
+ * - note: the interrupt routine will disable its own interrupts when the Tx
+ * buffer is empty
+ */
+static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
+{
+ _enter("%s", port->name);
+
+ if (uart_tx_stopped(&port->uart) ||
+ uart_circ_empty(&port->uart.info->xmit))
+ mn10300_serial_dis_tx_intr(port);
+
+ if (uart_circ_chars_pending(&port->uart.info->xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&port->uart);
+}
+
+/*
+ * deal with a change in the status of the CTS line
+ */
+static void mn10300_serial_cts_changed(struct mn10300_serial_port *port, u8 st)
+{
+ u16 ctr;
+
+ port->tx_cts = st;
+ port->uart.icount.cts++;
+
+ /* flip the CTS state selector flag to interrupt when it changes
+ * back */
+ ctr = *port->_control;
+ ctr ^= SC2CTR_TWS;
+ *port->_control = ctr;
+
+ uart_handle_cts_change(&port->uart, st & SC2STR_CTS);
+ wake_up_interruptible(&port->uart.info->delta_msr_wait);
+}
+
+/*
+ * handle a virtual interrupt generated by the lower level "virtual DMA"
+ * routines (irq is the baud timer interrupt)
+ */
+static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id)
+{
+ struct mn10300_serial_port *port = dev_id;
+ u8 st;
+
+ spin_lock(&port->uart.lock);
+
+ if (port->intr_flags) {
+ _debug("INT %s: %x", port->name, port->intr_flags);
+
+ if (mask_test_and_clear(&port->intr_flags, MNSCx_RX_AVAIL))
+ mn10300_serial_receive_interrupt(port);
+
+ if (mask_test_and_clear(&port->intr_flags,
+ MNSCx_TX_SPACE | MNSCx_TX_EMPTY))
+ mn10300_serial_transmit_interrupt(port);
+ }
+
+ /* the only modem control line amongst the whole lot is CTS on
+ * serial port 2 */
+ if (port->type == PORT_MN10300_CTS) {
+ st = *port->_status;
+ if ((port->tx_cts ^ st) & SC2STR_CTS)
+ mn10300_serial_cts_changed(port, st);
+ }
+
+ spin_unlock(&port->uart.lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * return indication of whether the hardware transmit buffer is empty
+ */
+static unsigned int mn10300_serial_tx_empty(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ return (*port->_status & (SC01STR_TXF | SC01STR_TBF)) ?
+ 0 : TIOCSER_TEMT;
+}
+
+/*
+ * set the modem control lines (we don't have any)
+ */
+static void mn10300_serial_set_mctrl(struct uart_port *_port,
+ unsigned int mctrl)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%x", port->name, mctrl);
+}
+
+/*
+ * get the modem control line statuses
+ */
+static unsigned int mn10300_serial_get_mctrl(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ if (port->type == PORT_MN10300_CTS && !(*port->_status & SC2STR_CTS))
+ return TIOCM_CAR | TIOCM_DSR;
+
+ return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR;
+}
+
+/*
+ * stop transmitting characters
+ */
+static void mn10300_serial_stop_tx(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ /* disable the virtual DMA */
+ mn10300_serial_dis_tx_intr(port);
+}
+
+/*
+ * start transmitting characters
+ * - jump-start transmission if it has stalled
+ * - enable the serial Tx interrupt (used by the virtual DMA controller)
+ * - force an interrupt to happen if necessary
+ */
+static void mn10300_serial_start_tx(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ u16 x;
+
+ _enter("%s{%lu}",
+ port->name,
+ CIRC_CNT(&port->uart.info->xmit.head,
+ &port->uart.info->xmit.tail,
+ UART_XMIT_SIZE));
+
+ /* kick the virtual DMA controller */
+ x = *port->tx_icr;
+ x |= GxICR_ENABLE;
+
+ if (*port->_status & SC01STR_TBF)
+ x &= ~(GxICR_REQUEST | GxICR_DETECT);
+ else
+ x |= GxICR_REQUEST | GxICR_DETECT;
+
+ _debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx",
+ *port->_control, *port->_intr, *port->_status,
+ *port->_tmxmd, *port->_tmxbr, *port->tx_icr);
+
+ *port->tx_icr = x;
+ x = *port->tx_icr;
+}
+
+/*
+ * transmit a high-priority XON/XOFF character
+ */
+static void mn10300_serial_send_xchar(struct uart_port *_port, char ch)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%02x", port->name, ch);
+
+ if (likely(port->gdbstub)) {
+ port->tx_xchar = ch;
+ if (ch)
+ mn10300_serial_en_tx_intr(port);
+ }
+}
+
+/*
+ * stop receiving characters
+ * - called whilst the port is being closed
+ */
+static void mn10300_serial_stop_rx(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ u16 ctr;
+
+ _enter("%s", port->name);
+
+ ctr = *port->_control;
+ ctr &= ~SC01CTR_RXE;
+ *port->_control = ctr;
+
+ mn10300_serial_dis_rx_intr(port);
+}
+
+/*
+ * enable modem status interrupts
+ */
+static void mn10300_serial_enable_ms(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ u16 ctr, cts;
+
+ _enter("%s", port->name);
+
+ if (port->type == PORT_MN10300_CTS) {
+ /* want to interrupt when CTS goes low if CTS is now high and
+ * vice versa
+ */
+ port->tx_cts = *port->_status;
+
+ cts = (port->tx_cts & SC2STR_CTS) ?
+ SC2CTR_TWE : SC2CTR_TWE | SC2CTR_TWS;
+
+ ctr = *port->_control;
+ ctr &= ~SC2CTR_TWS;
+ ctr |= cts;
+ *port->_control = ctr;
+
+ mn10300_serial_en_tx_intr(port);
+ }
+}
+
+/*
+ * transmit or cease transmitting a break signal
+ */
+static void mn10300_serial_break_ctl(struct uart_port *_port, int ctl)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%d", port->name, ctl);
+
+ if (ctl) {
+ /* tell the virtual DMA handler to assert BREAK */
+ port->tx_break = 1;
+ mn10300_serial_en_tx_intr(port);
+ } else {
+ port->tx_break = 0;
+ *port->_control &= ~SC01CTR_BKE;
+ mn10300_serial_en_tx_intr(port);
+ }
+}
+
+/*
+ * grab the interrupts and enable the port for reception
+ */
+static int mn10300_serial_startup(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+ struct mn10300_serial_int *pint;
+
+ _enter("%s{%d}", port->name, port->gdbstub);
+
+ if (unlikely(port->gdbstub))
+ return -EBUSY;
+
+ /* allocate an Rx buffer for the virtual DMA handler */
+ port->rx_buffer = kmalloc(MNSC_BUFFER_SIZE, GFP_KERNEL);
+ if (!port->rx_buffer)
+ return -ENOMEM;
+
+ port->rx_inp = port->rx_outp = 0;
+
+ /* finally, enable the device */
+ *port->_intr = SC01ICR_TI;
+ *port->_control |= SC01CTR_TXE | SC01CTR_RXE;
+
+ pint = &mn10300_serial_int_tbl[port->rx_irq];
+ pint->port = port;
+ pint->vdma = mn10300_serial_vdma_rx_handler;
+ pint = &mn10300_serial_int_tbl[port->tx_irq];
+ pint->port = port;
+ pint->vdma = mn10300_serial_vdma_tx_handler;
+
+ set_intr_level(port->rx_irq, GxICR_LEVEL_1);
+ set_intr_level(port->tx_irq, GxICR_LEVEL_1);
+ set_irq_chip(port->tm_irq, &mn10300_serial_pic);
+
+ if (request_irq(port->rx_irq, mn10300_serial_interrupt,
+ IRQF_DISABLED, port->rx_name, port) < 0)
+ goto error;
+
+ if (request_irq(port->tx_irq, mn10300_serial_interrupt,
+ IRQF_DISABLED, port->tx_name, port) < 0)
+ goto error2;
+
+ if (request_irq(port->tm_irq, mn10300_serial_interrupt,
+ IRQF_DISABLED, port->tm_name, port) < 0)
+ goto error3;
+ mn10300_serial_mask_ack(port->tm_irq);
+
+ return 0;
+
+error3:
+ free_irq(port->tx_irq, port);
+error2:
+ free_irq(port->rx_irq, port);
+error:
+ kfree(port->rx_buffer);
+ port->rx_buffer = NULL;
+ return -EBUSY;
+}
+
+/*
+ * shutdown the port and release interrupts
+ */
+static void mn10300_serial_shutdown(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ /* disable the serial port and its baud rate timer */
+ port->tx_break = 0;
+ *port->_control &= ~(SC01CTR_TXE | SC01CTR_RXE | SC01CTR_BKE);
+ *port->_tmxmd = 0;
+
+ if (port->rx_buffer) {
+ void *buf = port->rx_buffer;
+ port->rx_buffer = NULL;
+ kfree(buf);
+ }
+
+ /* disable all intrs */
+ free_irq(port->tm_irq, port);
+ free_irq(port->rx_irq, port);
+ free_irq(port->tx_irq, port);
+
+ *port->rx_icr = GxICR_LEVEL_1;
+ *port->tx_icr = GxICR_LEVEL_1;
+}
+
+/*
+ * this routine is called to set the UART divisor registers to match the
+ * specified baud rate for a serial port.
+ */
+static void mn10300_serial_change_speed(struct mn10300_serial_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned long ioclk = port->ioclk;
+ unsigned cflag;
+ int baud, bits, xdiv, tmp;
+ u16 tmxbr, scxctr;
+ u8 tmxmd, battempt;
+ u8 div_timer = port->div_timer;
+
+ _enter("%s{%lu}", port->name, ioclk);
+
+ /* byte size and parity */
+ cflag = new->c_cflag;
+ switch (cflag & CSIZE) {
+ case CS7: scxctr = SC01CTR_CLN_7BIT; bits = 9; break;
+ case CS8: scxctr = SC01CTR_CLN_8BIT; bits = 10; break;
+ default: scxctr = SC01CTR_CLN_8BIT; bits = 10; break;
+ }
+
+ if (cflag & CSTOPB) {
+ scxctr |= SC01CTR_STB_2BIT;
+ bits++;
+ }
+
+ if (cflag & PARENB) {
+ bits++;
+ if (cflag & PARODD)
+ scxctr |= SC01CTR_PB_ODD;
+#ifdef CMSPAR
+ else if (cflag & CMSPAR)
+ scxctr |= SC01CTR_PB_FIXED0;
+#endif
+ else
+ scxctr |= SC01CTR_PB_EVEN;
+ }
+
+ /* Determine divisor based on baud rate */
+ battempt = 0;
+
+ if (div_timer == MNSCx_DIV_TIMER_16BIT)
+ scxctr |= SC0CTR_CK_TM8UFLOW_8; /* ( == SC1CTR_CK_TM9UFLOW_8
+ * == SC2CTR_CK_TM10UFLOW) */
+ else if (div_timer == MNSCx_DIV_TIMER_8BIT)
+ scxctr |= SC0CTR_CK_TM2UFLOW_8;
+
+try_alternative:
+ baud = uart_get_baud_rate(&port->uart, new, old, 0,
+ port->ioclk / 8);
+
+ _debug("ALT %d [baud %d]", battempt, baud);
+
+ if (!baud)
+ baud = 9600; /* B0 transition handled in rs_set_termios */
+ xdiv = 1;
+ if (baud == 134) {
+ baud = 269; /* 134 is really 134.5 */
+ xdiv = 2;
+ }
+
+ if (baud == 38400 &&
+ (port->uart.flags & UPF_SPD_MASK) == UPF_SPD_CUST
+ ) {
+ _debug("CUSTOM %u", port->uart.custom_divisor);
+
+ if (div_timer == MNSCx_DIV_TIMER_16BIT) {
+ if (port->uart.custom_divisor <= 65535) {
+ tmxmd = TM8MD_SRC_IOCLK;
+ tmxbr = port->uart.custom_divisor;
+ port->uart.uartclk = ioclk;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 8 <= 65535) {
+ tmxmd = TM8MD_SRC_IOCLK_8;
+ tmxbr = port->uart.custom_divisor / 8;
+ port->uart.custom_divisor = tmxbr * 8;
+ port->uart.uartclk = ioclk / 8;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 32 <= 65535) {
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ tmxbr = port->uart.custom_divisor / 32;
+ port->uart.custom_divisor = tmxbr * 32;
+ port->uart.uartclk = ioclk / 32;
+ goto timer_okay;
+ }
+
+ } else if (div_timer == MNSCx_DIV_TIMER_8BIT) {
+ if (port->uart.custom_divisor <= 255) {
+ tmxmd = TM2MD_SRC_IOCLK;
+ tmxbr = port->uart.custom_divisor;
+ port->uart.uartclk = ioclk;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 8 <= 255) {
+ tmxmd = TM2MD_SRC_IOCLK_8;
+ tmxbr = port->uart.custom_divisor / 8;
+ port->uart.custom_divisor = tmxbr * 8;
+ port->uart.uartclk = ioclk / 8;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 32 <= 255) {
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = port->uart.custom_divisor / 32;
+ port->uart.custom_divisor = tmxbr * 32;
+ port->uart.uartclk = ioclk / 32;
+ goto timer_okay;
+ }
+ }
+ }
+
+ switch (div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ port->uart.uartclk = ioclk;
+ tmxmd = TM8MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 8;
+ tmxmd = TM8MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 32;
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ port->uart.uartclk = ioclk;
+ tmxmd = TM2MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 8;
+ tmxmd = TM2MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 32;
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+ break;
+
+ default:
+ BUG();
+ return;
+ }
+
+ /* refuse to change to a baud rate we can't support */
+ _debug("CAN'T SUPPORT");
+
+ switch (battempt) {
+ case 0:
+ if (old) {
+ new->c_cflag &= ~CBAUD;
+ new->c_cflag |= (old->c_cflag & CBAUD);
+ battempt = 1;
+ goto try_alternative;
+ }
+
+ case 1:
+ /* as a last resort, if the quotient is zero, default to 9600
+ * bps */
+ new->c_cflag &= ~CBAUD;
+ new->c_cflag |= B9600;
+ battempt = 2;
+ goto try_alternative;
+
+ default:
+ /* hmmm... can't seem to support 9600 either
+ * - we could try iterating through the speeds we know about to
+ * find the lowest
+ */
+ new->c_cflag &= ~CBAUD;
+ new->c_cflag |= B0;
+
+ if (div_timer == MNSCx_DIV_TIMER_16BIT)
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ else if (div_timer == MNSCx_DIV_TIMER_8BIT)
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = 1;
+
+ port->uart.uartclk = ioclk / 32;
+ break;
+ }
+timer_okay:
+
+ _debug("UARTCLK: %u / %hu", port->uart.uartclk, tmxbr);
+
+ /* make the changes */
+ spin_lock_irqsave(&port->uart.lock, flags);
+
+ uart_update_timeout(&port->uart, new->c_cflag, baud);
+
+ /* set the timer to produce the required baud rate */
+ switch (div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ *port->_tmxmd = 0;
+ *port->_tmxbr = tmxbr;
+ *port->_tmxmd = TM8MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ *port->_tmxmd = 0;
+ *(volatile u8 *) port->_tmxbr = (u8) tmxbr;
+ *port->_tmxmd = TM2MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+ break;
+ }
+
+ /* CTS flow control flag and modem status interrupts */
+ scxctr &= ~(SC2CTR_TWE | SC2CTR_TWS);
+
+ if (port->type == PORT_MN10300_CTS && cflag & CRTSCTS) {
+ /* want to interrupt when CTS goes low if CTS is now
+ * high and vice versa
+ */
+ port->tx_cts = *port->_status;
+
+ if (port->tx_cts & SC2STR_CTS)
+ scxctr |= SC2CTR_TWE;
+ else
+ scxctr |= SC2CTR_TWE | SC2CTR_TWS;
+ }
+
+ /* set up parity check flag */
+ port->uart.read_status_mask = (1 << TTY_NORMAL) | (1 << TTY_OVERRUN);
+ if (new->c_iflag & INPCK)
+ port->uart.read_status_mask |=
+ (1 << TTY_PARITY) | (1 << TTY_FRAME);
+ if (new->c_iflag & (BRKINT | PARMRK))
+ port->uart.read_status_mask |= (1 << TTY_BREAK);
+
+ /* characters to ignore */
+ port->uart.ignore_status_mask = 0;
+ if (new->c_iflag & IGNPAR)
+ port->uart.ignore_status_mask |=
+ (1 << TTY_PARITY) | (1 << TTY_FRAME);
+ if (new->c_iflag & IGNBRK) {
+ port->uart.ignore_status_mask |= (1 << TTY_BREAK);
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns to (for real raw support).
+ */
+ if (new->c_iflag & IGNPAR)
+ port->uart.ignore_status_mask |= (1 << TTY_OVERRUN);
+ }
+
+ /* Ignore all characters if CREAD is not set */
+ if ((new->c_cflag & CREAD) == 0)
+ port->uart.ignore_status_mask |= (1 << TTY_NORMAL);
+
+ scxctr |= *port->_control & (SC01CTR_TXE | SC01CTR_RXE | SC01CTR_BKE);
+ *port->_control = scxctr;
+
+ spin_unlock_irqrestore(&port->uart.lock, flags);
+}
+
+/*
+ * set the terminal I/O parameters
+ */
+static void mn10300_serial_set_termios(struct uart_port *_port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%p,%p", port->name, new, old);
+
+ mn10300_serial_change_speed(port, new, old);
+
+ /* handle turning off CRTSCTS */
+ if (!(new->c_cflag & CRTSCTS)) {
+ u16 ctr = *port->_control;
+ ctr &= ~SC2CTR_TWE;
+ *port->_control = ctr;
+ }
+}
+
+/*
+ * return description of port type
+ */
+static const char *mn10300_serial_type(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ if (port->uart.type == PORT_MN10300_CTS)
+ return "MN10300 SIF_CTS";
+
+ return "MN10300 SIF";
+}
+
+/*
+ * release I/O and memory regions in use by port
+ */
+static void mn10300_serial_release_port(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ release_mem_region((unsigned long) port->_iobase, 16);
+}
+
+/*
+ * request I/O and memory regions for port
+ */
+static int mn10300_serial_request_port(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ request_mem_region((unsigned long) port->_iobase, 16, port->name);
+ return 0;
+}
+
+/*
+ * configure the type and reserve the ports
+ */
+static void mn10300_serial_config_port(struct uart_port *_port, int type)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ port->uart.type = PORT_MN10300;
+
+ if (port->options & MNSCx_OPT_CTS)
+ port->uart.type = PORT_MN10300_CTS;
+
+ mn10300_serial_request_port(_port);
+}
+
+/*
+ * verify serial parameters are suitable for this port type
+ */
+static int mn10300_serial_verify_port(struct uart_port *_port,
+ struct serial_struct *ss)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+ void *mapbase = (void *) (unsigned long) port->uart.mapbase;
+
+ _enter("%s", port->name);
+
+ /* these things may not be changed */
+ if (ss->irq != port->uart.irq ||
+ ss->port != port->uart.iobase ||
+ ss->io_type != port->uart.iotype ||
+ ss->iomem_base != mapbase ||
+ ss->iomem_reg_shift != port->uart.regshift ||
+ ss->hub6 != port->uart.hub6 ||
+ ss->xmit_fifo_size != port->uart.fifosize)
+ return -EINVAL;
+
+ /* type may be changed on a port that supports CTS */
+ if (ss->type != port->uart.type) {
+ if (!(port->options & MNSCx_OPT_CTS))
+ return -EINVAL;
+
+ if (ss->type != PORT_MN10300 &&
+ ss->type != PORT_MN10300_CTS)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * initialise the MN10300 on-chip UARTs
+ */
+static int __init mn10300_serial_init(void)
+{
+ struct mn10300_serial_port *port;
+ int ret, i;
+
+ printk(KERN_INFO "%s version %s (%s)\n",
+ serial_name, serial_version, serial_revdate);
+
+#ifdef CONFIG_MN10300_TTYSM2
+ SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */
+#endif
+
+ set_intr_stub(EXCEP_IRQ_LEVEL1, mn10300_serial_vdma_interrupt);
+
+ ret = uart_register_driver(&mn10300_serial_driver);
+ if (!ret) {
+ for (i = 0 ; i < NR_PORTS ; i++) {
+ port = mn10300_serial_ports[i];
+ if (!port || port->gdbstub)
+ continue;
+
+ switch (port->clock_src) {
+ case MNSCx_CLOCK_SRC_IOCLK:
+ port->ioclk = MN10300_IOCLK;
+ break;
+
+#ifdef MN10300_IOBCLK
+ case MNSCx_CLOCK_SRC_IOBCLK:
+ port->ioclk = MN10300_IOBCLK;
+ break;
+#endif
+ default:
+ BUG();
+ }
+
+ ret = uart_add_one_port(&mn10300_serial_driver,
+ &port->uart);
+
+ if (ret < 0) {
+ _debug("ERROR %d", -ret);
+ break;
+ }
+ }
+
+ if (ret)
+ uart_unregister_driver(&mn10300_serial_driver);
+ }
+
+ return ret;
+}
+
+__initcall(mn10300_serial_init);
+
+
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+
+/*
+ * print a string to the serial port without disturbing the real user of the
+ * port too much
+ * - the console must be locked by the caller
+ */
+static void mn10300_serial_console_write(struct console *co,
+ const char *s, unsigned count)
+{
+ struct mn10300_serial_port *port;
+ unsigned i;
+ u16 scxctr, txicr, tmp;
+ u8 tmxmd;
+
+ port = mn10300_serial_ports[co->index];
+
+ /* firstly hijack the serial port from the "virtual DMA" controller */
+ txicr = *port->tx_icr;
+ *port->tx_icr = GxICR_LEVEL_1;
+ tmp = *port->tx_icr;
+
+ /* the transmitter may be disabled */
+ scxctr = *port->_control;
+ if (!(scxctr & SC01CTR_TXE)) {
+ /* restart the UART clock */
+ tmxmd = *port->_tmxmd;
+
+ switch (port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ *port->_tmxmd = 0;
+ *port->_tmxmd = TM8MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ *port->_tmxmd = 0;
+ *port->_tmxmd = TM2MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+ break;
+ }
+
+ /* enable the transmitter */
+ *port->_control = (scxctr & ~SC01CTR_BKE) | SC01CTR_TXE;
+
+ } else if (scxctr & SC01CTR_BKE) {
+ /* stop transmitting BREAK */
+ *port->_control = (scxctr & ~SC01CTR_BKE);
+ }
+
+ /* send the chars into the serial port (with LF -> LFCR conversion) */
+ for (i = 0; i < count; i++) {
+ char ch = *s++;
+
+ while (*port->_status & SC01STR_TBF)
+ continue;
+ *(u8 *) port->_txb = ch;
+
+ if (ch == 0x0a) {
+ while (*port->_status & SC01STR_TBF)
+ continue;
+ *(u8 *) port->_txb = 0xd;
+ }
+ }
+
+ /* can't let the transmitter be turned off if it's actually
+ * transmitting */
+ while (*port->_status & (SC01STR_TXF | SC01STR_TBF))
+ continue;
+
+ /* disable the transmitter if we re-enabled it */
+ if (!(scxctr & SC01CTR_TXE))
+ *port->_control = scxctr;
+
+ *port->tx_icr = txicr;
+ tmp = *port->tx_icr;
+}
+
+/*
+ * set up a serial port as a console
+ * - construct a cflag setting for the first rs_open()
+ * - initialize the serial port
+ * - return non-zero if we didn't find a serial port.
+ */
+static int __init mn10300_serial_console_setup(struct console *co,
+ char *options)
+{
+ struct mn10300_serial_port *port;
+ int i, parity = 'n', baud = 9600, bits = 8, flow = 0;
+
+ for (i = 0 ; i < NR_PORTS ; i++) {
+ port = mn10300_serial_ports[i];
+ if (port && !port->gdbstub && port->uart.line == co->index)
+ goto found_device;
+ }
+
+ return -ENODEV;
+
+found_device:
+ switch (port->clock_src) {
+ case MNSCx_CLOCK_SRC_IOCLK:
+ port->ioclk = MN10300_IOCLK;
+ break;
+
+#ifdef MN10300_IOBCLK
+ case MNSCx_CLOCK_SRC_IOBCLK:
+ port->ioclk = MN10300_IOBCLK;
+ break;
+#endif
+ default:
+ BUG();
+ }
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&port->uart, co, baud, parity, bits, flow);
+}
+
+/*
+ * register console
+ */
+static int __init mn10300_serial_console_init(void)
+{
+ register_console(&mn10300_serial_console);
+ return 0;
+}
+
+console_initcall(mn10300_serial_console_init);
+#endif
diff --git a/arch/mn10300/kernel/mn10300-serial.h b/arch/mn10300/kernel/mn10300-serial.h
new file mode 100644
index 0000000..6796499
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-serial.h
@@ -0,0 +1,126 @@
+/* MN10300 On-chip serial port driver definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _MN10300_SERIAL_H
+#define _MN10300_SERIAL_H
+
+#ifndef __ASSEMBLY__
+#include <linux/serial_core.h>
+#include <linux/termios.h>
+#endif
+
+#include <asm/page.h>
+#include <asm/serial-regs.h>
+
+#define NR_PORTS 3 /* should be set 3 or 9 or 16 */
+
+#define MNSC_BUFFER_SIZE +(PAGE_SIZE / 2)
+
+/* intr_flags bits */
+#define MNSCx_RX_AVAIL 0x01
+#define MNSCx_RX_OVERF 0x02
+#define MNSCx_TX_SPACE 0x04
+#define MNSCx_TX_EMPTY 0x08
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_serial_port {
+ char *rx_buffer; /* reception buffer base */
+ unsigned rx_inp; /* pointer to rx input offset */
+ unsigned rx_outp; /* pointer to rx output offset */
+ u8 tx_xchar; /* high-priority XON/XOFF buffer */
+ u8 tx_break; /* transmit break request */
+ u8 intr_flags; /* interrupt flags */
+ volatile u16 *rx_icr; /* Rx interrupt control register */
+ volatile u16 *tx_icr; /* Tx interrupt control register */
+ int rx_irq; /* reception IRQ */
+ int tx_irq; /* transmission IRQ */
+ int tm_irq; /* timer IRQ */
+
+ const char *name; /* name of serial port */
+ const char *rx_name; /* Rx interrupt handler name of serial port */
+ const char *tx_name; /* Tx interrupt handler name of serial port */
+ const char *tm_name; /* Timer interrupt handler name */
+ unsigned short type; /* type of serial port */
+ unsigned char isconsole; /* T if it's a console */
+ volatile void *_iobase; /* pointer to base of I/O control regs */
+ volatile u16 *_control; /* control register pointer */
+ volatile u8 *_status; /* status register pointer */
+ volatile u8 *_intr; /* interrupt register pointer */
+ volatile void *_rxb; /* receive buffer register pointer */
+ volatile void *_txb; /* transmit buffer register pointer */
+ volatile u16 *_tmicr; /* timer interrupt control register */
+ volatile u8 *_tmxmd; /* baud rate timer mode register */
+ volatile u16 *_tmxbr; /* baud rate timer base register */
+
+ /* this must come down here so that assembly can use BSET to access the
+ * above fields */
+ struct uart_port uart;
+
+ unsigned short rx_brk; /* current break reception status */
+ u16 tx_cts; /* current CTS status */
+ int gdbstub; /* preemptively stolen by GDB stub */
+
+ u8 clock_src; /* clock source */
+#define MNSCx_CLOCK_SRC_IOCLK 0
+#define MNSCx_CLOCK_SRC_IOBCLK 1
+
+ u8 div_timer; /* timer used as divisor */
+#define MNSCx_DIV_TIMER_16BIT 0
+#define MNSCx_DIV_TIMER_8BIT 1
+
+ u16 options; /* options */
+#define MNSCx_OPT_CTS 0x0001
+
+ unsigned long ioclk; /* base clock rate */
+};
+
+#ifdef CONFIG_MN10300_TTYSM0
+extern struct mn10300_serial_port mn10300_serial_port_sif0;
+#endif
+
+#ifdef CONFIG_MN10300_TTYSM1
+extern struct mn10300_serial_port mn10300_serial_port_sif1;
+#endif
+
+#ifdef CONFIG_MN10300_TTYSM2
+extern struct mn10300_serial_port mn10300_serial_port_sif2;
+#endif
+
+extern struct mn10300_serial_port *mn10300_serial_ports[];
+
+struct mn10300_serial_int {
+ struct mn10300_serial_port *port;
+ asmlinkage void (*vdma)(void);
+};
+
+extern struct mn10300_serial_int mn10300_serial_int_tbl[];
+
+extern asmlinkage void mn10300_serial_vdma_interrupt(void);
+extern asmlinkage void mn10300_serial_vdma_rx_handler(void);
+extern asmlinkage void mn10300_serial_vdma_tx_handler(void);
+
+#endif /* __ASSEMBLY__ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYSM0)
+#define SCgSTR SC0STR
+#define SCgRXB SC0RXB
+#define SCgRXIRQ SC0RXIRQ
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM1)
+#define SCgSTR SC1STR
+#define SCgRXB SC1RXB
+#define SCgRXIRQ SC1RXIRQ
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM2)
+#define SCgSTR SC2STR
+#define SCgRXB SC2RXB
+#define SCgRXIRQ SC2RXIRQ
+#endif
+
+#endif /* _MN10300_SERIAL_H */
diff --git a/arch/mn10300/kernel/mn10300-watchdog-low.S b/arch/mn10300/kernel/mn10300-watchdog-low.S
new file mode 100644
index 0000000..9962447
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-watchdog-low.S
@@ -0,0 +1,59 @@
+###############################################################################
+#
+# MN10300 Watchdog interrupt handler
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/intctl-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/frame.inc>
+
+ .text
+
+###############################################################################
+#
+# Watchdog handler entry point
+# - special non-maskable interrupt
+#
+###############################################################################
+ .globl watchdog_handler
+ .type watchdog_handler,@function
+watchdog_handler:
+ add -4,sp
+ SAVE_ALL
+
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+ mov fp,d0
+ lsr 2,d1
+ call watchdog_interrupt[],0 # watchdog_interrupt(regs,irq)
+
+ jmp ret_from_intr
+
+ .size watchdog_handler,.-watchdog_handler
+
+###############################################################################
+#
+# Watchdog touch entry point
+# - kept to absolute minimum (unfortunately, it's prototyped in linux/nmi.h so
+# we can't inline it)
+#
+###############################################################################
+ .globl touch_nmi_watchdog
+ .type touch_nmi_watchdog,@function
+touch_nmi_watchdog:
+ clr d0
+ mov d0,(watchdog_alert_counter)
+ ret [],0
+
+ .size touch_nmi_watchdog,.-touch_nmi_watchdog
diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c
new file mode 100644
index 0000000..10811e9
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-watchdog.c
@@ -0,0 +1,183 @@
+/* MN10300 Watchdog timer
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/kernel/nmi.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/nmi.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <asm/div64.h>
+#include <asm/smp.h>
+#include <asm/gdb-stub.h>
+#include <asm/proc/clock.h>
+
+static DEFINE_SPINLOCK(watchdog_print_lock);
+static unsigned int watchdog;
+static unsigned int watchdog_hz = 1;
+unsigned int watchdog_alert_counter;
+
+EXPORT_SYMBOL(touch_nmi_watchdog);
+
+/*
+ * the best way to detect whether a CPU has a 'hard lockup' problem
+ * is to check its timer makes IRQ counts. If they are not
+ * changing then that CPU has some problem.
+ *
+ * as these watchdog NMI IRQs are generated on every CPU, we only
+ * have to check the current processor.
+ *
+ * since NMIs dont listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up
+ * here too!]
+ */
+static unsigned int last_irq_sums[NR_CPUS];
+
+int __init check_watchdog(void)
+{
+ irq_cpustat_t tmp[1];
+
+ printk(KERN_INFO "Testing Watchdog... ");
+
+ memcpy(tmp, irq_stat, sizeof(tmp));
+ local_irq_enable();
+ mdelay((10 * 1000) / watchdog_hz); /* wait 10 ticks */
+ local_irq_disable();
+
+ if (nmi_count(0) - tmp[0].__nmi_count <= 5) {
+ printk(KERN_WARNING "CPU#%d: Watchdog appears to be stuck!\n",
+ 0);
+ return -1;
+ }
+
+ printk(KERN_INFO "OK.\n");
+
+ /* now that we know it works we can reduce NMI frequency to
+ * something more reasonable; makes a difference in some configs
+ */
+ watchdog_hz = 1;
+
+ return 0;
+}
+
+static int __init setup_watchdog(char *str)
+{
+ unsigned tmp;
+ int opt;
+ u8 ctr;
+
+ get_option(&str, &opt);
+ if (opt != 1)
+ return 0;
+
+ watchdog = opt;
+ if (watchdog) {
+ set_intr_stub(EXCEP_WDT, watchdog_handler);
+ ctr = WDCTR_WDCK_65536th;
+ WDCTR = WDCTR_WDRST | ctr;
+ WDCTR = ctr;
+ tmp = WDCTR;
+
+ tmp = __muldiv64u(1 << (16 + ctr * 2), 1000000, MN10300_WDCLK);
+ tmp = 1000000000 / tmp;
+ watchdog_hz = (tmp + 500) / 1000;
+ }
+
+ return 1;
+}
+
+__setup("watchdog=", setup_watchdog);
+
+void __init watchdog_go(void)
+{
+ u8 wdt;
+
+ if (watchdog) {
+ printk(KERN_INFO "Watchdog: running at %uHz\n", watchdog_hz);
+ wdt = WDCTR & ~WDCTR_WDCNE;
+ WDCTR = wdt | WDCTR_WDRST;
+ wdt = WDCTR;
+ WDCTR = wdt | WDCTR_WDCNE;
+ wdt = WDCTR;
+
+ check_watchdog();
+ }
+}
+
+asmlinkage
+void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep)
+{
+
+ /*
+ * Since current-> is always on the stack, and we always switch
+ * the stack NMI-atomically, it's safe to use smp_processor_id().
+ */
+ int sum, cpu = smp_processor_id();
+ u8 wdt, tmp;
+
+ wdt = WDCTR & ~WDCTR_WDCNE;
+ WDCTR = wdt;
+ tmp = WDCTR;
+ NMICR = NMICR_WDIF;
+
+ nmi_count(cpu)++;
+ kstat_this_cpu.irqs[NMIIRQ]++;
+ sum = irq_stat[cpu].__irq_count;
+
+ if (last_irq_sums[cpu] == sum) {
+ /*
+ * Ayiee, looks like this CPU is stuck ...
+ * wait a few IRQs (5 seconds) before doing the oops ...
+ */
+ watchdog_alert_counter++;
+ if (watchdog_alert_counter == 5 * watchdog_hz) {
+ spin_lock(&watchdog_print_lock);
+ /*
+ * We are in trouble anyway, lets at least try
+ * to get a message out.
+ */
+ bust_spinlocks(1);
+ printk(KERN_ERR
+ "NMI Watchdog detected LOCKUP on CPU%d,"
+ " pc %08lx, registers:\n",
+ cpu, regs->pc);
+ show_registers(regs);
+ printk("console shuts up ...\n");
+ console_silent();
+ spin_unlock(&watchdog_print_lock);
+ bust_spinlocks(0);
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_busy)
+ gdbstub_exception(regs, excep);
+ else
+ gdbstub_intercept(regs, excep);
+#endif
+ do_exit(SIGSEGV);
+ }
+ } else {
+ last_irq_sums[cpu] = sum;
+ watchdog_alert_counter = 0;
+ }
+
+ WDCTR = wdt | WDCTR_WDRST;
+ tmp = WDCTR;
+ WDCTR = wdt | WDCTR_WDCNE;
+ tmp = WDCTR;
+}
diff --git a/arch/mn10300/kernel/mn10300_ksyms.c b/arch/mn10300/kernel/mn10300_ksyms.c
new file mode 100644
index 0000000..6d19628
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300_ksyms.c
@@ -0,0 +1,37 @@
+/* MN10300 Miscellaneous and library kernel exports
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+
+EXPORT_SYMBOL(change_bit);
+EXPORT_SYMBOL(test_and_change_bit);
+
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memset);
+
+EXPORT_SYMBOL(strncpy_from_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(clear_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__generic_copy_from_user);
+EXPORT_SYMBOL(__generic_copy_to_user);
+EXPORT_SYMBOL(strnlen_user);
+
+extern u64 __ashrdi3(u64, unsigned);
+extern u64 __ashldi3(u64, unsigned);
+extern u64 __lshrdi3(u64, unsigned);
+extern s64 __negdi2(s64);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__negdi2);
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
new file mode 100644
index 0000000..0e4d2f6
--- /dev/null
+++ b/arch/mn10300/kernel/module.c
@@ -0,0 +1,206 @@
+/* MN10300 Kernel module helper routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * - Derived from arch/i386/kernel/module.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt, ...)
+#endif
+
+/*
+ * allocate storage for a module
+ */
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc_exec(size);
+}
+
+/*
+ * free memory returned from module_alloc()
+ */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /* FIXME: If module_region == mod->init_region, trim exception
+ * table entries. */
+}
+
+/*
+ * allow the arch to fix up the section table
+ * - we don't need anything special
+ */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ return 0;
+}
+
+static uint32_t reloc_get16(uint8_t *p)
+{
+ return p[0] | (p[1] << 8);
+}
+
+static uint32_t reloc_get24(uint8_t *p)
+{
+ return reloc_get16(p) | (p[2] << 16);
+}
+
+static uint32_t reloc_get32(uint8_t *p)
+{
+ return reloc_get16(p) | (reloc_get16(p+2) << 16);
+}
+
+static void reloc_put16(uint8_t *p, uint32_t val)
+{
+ p[0] = val & 0xff;
+ p[1] = (val >> 8) & 0xff;
+}
+
+static void reloc_put24(uint8_t *p, uint32_t val)
+{
+ reloc_put16(p, val);
+ p[2] = (val >> 16) & 0xff;
+}
+
+static void reloc_put32(uint8_t *p, uint32_t val)
+{
+ reloc_put16(p, val);
+ reloc_put16(p+2, val >> 16);
+}
+
+/*
+ * apply a REL relocation
+ */
+int apply_relocate(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ printk(KERN_ERR "module %s: RELOCATION unsupported\n",
+ me->name);
+ return -ENOEXEC;
+}
+
+/*
+ * apply a RELA relocation
+ */
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ Elf32_Addr relocation;
+ uint8_t *location;
+ uint32_t value;
+
+ DEBUGP("Applying relocate section %u to %u\n",
+ relsec, sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* this is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+
+ /* this is the symbol the relocation is referring to (note that
+ * all undefined symbols have been resolved by the caller) */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+
+ /* this is the adjustment to be made */
+ relocation = sym->st_value + rel[i].r_addend;
+
+ switch (ELF32_R_TYPE(rel[i].r_info)) {
+ /* for the first four relocation types, we add the
+ * adjustment into the value at the location given */
+ case R_MN10300_32:
+ value = reloc_get32(location);
+ value += relocation;
+ reloc_put32(location, value);
+ break;
+ case R_MN10300_24:
+ value = reloc_get24(location);
+ value += relocation;
+ reloc_put24(location, value);
+ break;
+ case R_MN10300_16:
+ value = reloc_get16(location);
+ value += relocation;
+ reloc_put16(location, value);
+ break;
+ case R_MN10300_8:
+ *location += relocation;
+ break;
+
+ /* for the next three relocation types, we write the
+ * adjustment with the address subtracted over the
+ * value at the location given */
+ case R_MN10300_PCREL32:
+ value = relocation - (uint32_t) location;
+ reloc_put32(location, value);
+ break;
+ case R_MN10300_PCREL16:
+ value = relocation - (uint32_t) location;
+ reloc_put16(location, value);
+ break;
+ case R_MN10300_PCREL8:
+ *location = relocation - (uint32_t) location;
+ break;
+
+ default:
+ printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rel[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+/*
+ * finish loading the module
+ */
+int module_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ return 0;
+}
+
+/*
+ * finish clearing the module
+ */
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
new file mode 100644
index 0000000..3b0d579
--- /dev/null
+++ b/arch/mn10300/kernel/process.c
@@ -0,0 +1,297 @@
+/* MN10300 Process handling code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/percpu.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+#include <asm/fpu.h>
+#include <asm/reset-regs.h>
+#include <asm/gdb-stub.h>
+#include "internal.h"
+
+/*
+ * power management idle function, if any..
+ */
+void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
+
+/*
+ * return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+ return ((unsigned long *) tsk->thread.sp)[3];
+}
+
+/*
+ * power off function, if any
+ */
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+/*
+ * we use this if we don't have any better idle routine
+ */
+static void default_idle(void)
+{
+ local_irq_disable();
+ if (!need_resched())
+ safe_halt();
+ else
+ local_irq_enable();
+}
+
+/*
+ * the idle thread
+ * - there's no useful work to be done, so just try to conserve power and have
+ * a low exit latency (ie sit in a loop waiting for somebody to say that
+ * they'd like to reschedule)
+ */
+void cpu_idle(void)
+{
+ int cpu = smp_processor_id();
+
+ /* endless idle loop with no priority at all */
+ for (;;) {
+ while (!need_resched()) {
+ void (*idle)(void);
+
+ smp_rmb();
+ idle = pm_idle;
+ if (!idle)
+ idle = default_idle;
+
+ irq_stat[cpu].idle_timestamp = jiffies;
+ idle();
+ }
+
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
+}
+
+void release_segments(struct mm_struct *mm)
+{
+}
+
+void machine_restart(char *cmd)
+{
+#ifdef CONFIG_GDBSTUB
+ gdbstub_exit(0);
+#endif
+
+#ifdef mn10300_unit_hard_reset
+ mn10300_unit_hard_reset();
+#else
+ mn10300_proc_hard_reset();
+#endif
+}
+
+void machine_halt(void)
+{
+#ifdef CONFIG_GDBSTUB
+ gdbstub_exit(0);
+#endif
+}
+
+void machine_power_off(void)
+{
+#ifdef CONFIG_GDBSTUB
+ gdbstub_exit(0);
+#endif
+}
+
+void show_regs(struct pt_regs *regs)
+{
+}
+
+/*
+ * create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(®s, 0, sizeof(regs));
+
+ regs.a2 = (unsigned long) fn;
+ regs.d2 = (unsigned long) arg;
+ regs.pc = (unsigned long) kernel_thread_helper;
+ local_save_flags(regs.epsw);
+ regs.epsw |= EPSW_IE | EPSW_IM_7;
+
+ /* Ok, create the new process.. */
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0,
+ NULL, NULL);
+}
+
+/*
+ * free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+ exit_fpu();
+}
+
+void flush_thread(void)
+{
+ flush_fpu();
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+}
+
+/*
+ * we do not have to muck with descriptors here, that is
+ * done in switch_mm() as needed.
+ */
+void copy_segments(struct task_struct *p, struct mm_struct *new_mm)
+{
+}
+
+/*
+ * this gets called before we allocate a new thread and copy the current task
+ * into it so that we can store lazy state into memory
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+ unlazy_fpu(tsk);
+}
+
+/*
+ * set up the kernel stack for a new thread and copy arch-specific thread
+ * control information
+ */
+int copy_thread(int nr, unsigned long clone_flags,
+ unsigned long c_usp, unsigned long ustk_size,
+ struct task_struct *p, struct pt_regs *kregs)
+{
+ struct pt_regs *c_uregs, *c_kregs, *uregs;
+ unsigned long c_ksp;
+
+ uregs = current->thread.uregs;
+
+ c_ksp = (unsigned long) task_stack_page(p) + THREAD_SIZE;
+
+ /* allocate the userspace exception frame and set it up */
+ c_ksp -= sizeof(struct pt_regs);
+ c_uregs = (struct pt_regs *) c_ksp;
+
+ p->thread.uregs = c_uregs;
+ *c_uregs = *uregs;
+ c_uregs->sp = c_usp;
+ c_uregs->epsw &= ~EPSW_FE; /* my FPU */
+
+ c_ksp -= 12; /* allocate function call ABI slack */
+
+ /* the new TLS pointer is passed in as arg #5 to sys_clone() */
+ if (clone_flags & CLONE_SETTLS)
+ c_uregs->e2 = __frame->d3;
+
+ /* set up the return kernel frame if called from kernel_thread() */
+ c_kregs = c_uregs;
+ if (kregs != uregs) {
+ c_ksp -= sizeof(struct pt_regs);
+ c_kregs = (struct pt_regs *) c_ksp;
+ *c_kregs = *kregs;
+ c_kregs->sp = c_usp;
+ c_kregs->next = c_uregs;
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ c_kregs->e2 = (unsigned long) p; /* current */
+#endif
+
+ c_ksp -= 12; /* allocate function call ABI slack */
+ }
+
+ /* set up things up so the scheduler can start the new task */
+ p->thread.__frame = c_kregs;
+ p->thread.a3 = (unsigned long) c_kregs;
+ p->thread.sp = c_ksp;
+ p->thread.pc = (unsigned long) ret_from_fork;
+ p->thread.wchan = (unsigned long) ret_from_fork;
+ p->thread.usp = c_usp;
+
+ return 0;
+}
+
+/*
+ * clone a process
+ * - tlsptr is retrieved by copy_thread() from __frame->d3
+ */
+asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp,
+ int __user *parent_tidptr, int __user *child_tidptr,
+ int __user *tlsptr)
+{
+ return do_fork(clone_flags, newsp ?: __frame->sp, __frame, 0,
+ parent_tidptr, child_tidptr);
+}
+
+asmlinkage long sys_fork(void)
+{
+ return do_fork(SIGCHLD, __frame->sp, __frame, 0, NULL, NULL);
+}
+
+asmlinkage long sys_vfork(void)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, __frame->sp, __frame,
+ 0, NULL, NULL);
+}
+
+asmlinkage long sys_execve(char __user *name,
+ char __user * __user *argv,
+ char __user * __user *envp)
+{
+ char *filename;
+ int error;
+
+ lock_kernel();
+
+ filename = getname(name);
+ error = PTR_ERR(filename);
+ if (!IS_ERR(filename)) {
+ error = do_execve(filename, argv, envp, __frame);
+ if (error == 0)
+ current->ptrace &= ~PT_DTRACE;
+
+ putname(filename);
+ }
+
+ unlock_kernel();
+ return error;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ return p->thread.wchan;
+}
diff --git a/arch/mn10300/kernel/profile-low.S b/arch/mn10300/kernel/profile-low.S
new file mode 100644
index 0000000..94ffac1
--- /dev/null
+++ b/arch/mn10300/kernel/profile-low.S
@@ -0,0 +1,72 @@
+###############################################################################
+#
+# Fast profiling interrupt handler
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/intctl-regs.h>
+#include <asm/timer-regs.h>
+
+#define pi break
+
+ .balign 4
+counter:
+ .long -1
+
+###############################################################################
+#
+# Profiling interrupt entry point
+# - intended to run at interrupt priority 1
+#
+###############################################################################
+ENTRY(profile_handler)
+ movm [d2,d3,a2],(sp)
+
+ # ignore userspace
+ mov (12,sp),d2
+ and EPSW_nSL,d2
+ bne out
+
+ # do nothing if there's no buffer
+ mov (prof_buffer),a2
+ and a2,a2
+ beq out
+ or 0x20000000,a2
+
+ # calculate relative position in text segment
+ mov (16,sp),d2
+ sub _stext,d2
+ mov (prof_shift),d3
+ lsr d3,d2
+ mov (prof_len),d3
+ cmp d3,d2
+ bcc outside_text
+
+ # increment the appropriate profile bucket
+do_inc:
+ asl2 d2
+ mov (a2,d2),d3
+ inc d3
+ mov d3,(a2,d2)
+out:
+ mov GxICR_DETECT,d2
+ movbu d2,(TM11ICR) # ACK the interrupt
+ movbu (TM11ICR),d2
+ movm (sp),[d2,d3,a2]
+ rti
+
+outside_text:
+ sub 1,d3
+ mov d3,d2
+ bra do_inc
diff --git a/arch/mn10300/kernel/profile.c b/arch/mn10300/kernel/profile.c
new file mode 100644
index 0000000..20d7d03
--- /dev/null
+++ b/arch/mn10300/kernel/profile.c
@@ -0,0 +1,51 @@
+/* MN10300 Profiling setup
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * initialise the profiling if enabled
+ * - using with gdbstub will give anomalous results
+ * - can't be used with gdbstub if running at IRQ priority 0
+ */
+static __init int profile_init(void)
+{
+ u16 tmp;
+
+ if (!prof_buffer)
+ return 0;
+
+ /* use timer 11 to drive the profiling interrupts */
+ set_intr_stub(EXCEP_IRQ_LEVEL0, profile_handler);
+
+ /* set IRQ priority at which to run */
+ set_intr_level(TM11IRQ, GxICR_LEVEL_0);
+
+ /* set up timer 11
+ * - source: (IOCLK 33MHz)*2 = 66MHz
+ * - frequency: (33330000*2) / 8 / 20625 = 202Hz
+ */
+ TM11BR = 20625 - 1;
+ TM11MD = TM8MD_SRC_IOCLK_8;
+ TM11MD |= TM8MD_INIT_COUNTER;
+ TM11MD &= ~TM8MD_INIT_COUNTER;
+ TM11MD |= TM8MD_COUNT_ENABLE;
+
+ TM11ICR |= GxICR_ENABLE;
+ tmp = TM11ICR;
+
+ printk(KERN_INFO "Profiling initiated on timer 11, priority 0, %uHz\n",
+ mn10300_ioclk / 8 / (TM11BR + 1));
+ printk(KERN_INFO "Profile histogram stored %p-%p\n",
+ prof_buffer, (u8 *)(prof_buffer + prof_len) - 1);
+
+ return 0;
+}
+
+__initcall(profile_init);
diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c
new file mode 100644
index 0000000..d6d6cdc
--- /dev/null
+++ b/arch/mn10300/kernel/ptrace.c
@@ -0,0 +1,379 @@
+/* MN10300 Process tracing
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/fpu.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * translate ptrace register IDs into struct pt_regs offsets
+ */
+static const u8 ptrace_regid_to_frame[] = {
+ [PT_A3 << 2] = REG_A3,
+ [PT_A2 << 2] = REG_A2,
+ [PT_D3 << 2] = REG_D3,
+ [PT_D2 << 2] = REG_D2,
+ [PT_MCVF << 2] = REG_MCVF,
+ [PT_MCRL << 2] = REG_MCRL,
+ [PT_MCRH << 2] = REG_MCRH,
+ [PT_MDRQ << 2] = REG_MDRQ,
+ [PT_E1 << 2] = REG_E1,
+ [PT_E0 << 2] = REG_E0,
+ [PT_E7 << 2] = REG_E7,
+ [PT_E6 << 2] = REG_E6,
+ [PT_E5 << 2] = REG_E5,
+ [PT_E4 << 2] = REG_E4,
+ [PT_E3 << 2] = REG_E3,
+ [PT_E2 << 2] = REG_E2,
+ [PT_SP << 2] = REG_SP,
+ [PT_LAR << 2] = REG_LAR,
+ [PT_LIR << 2] = REG_LIR,
+ [PT_MDR << 2] = REG_MDR,
+ [PT_A1 << 2] = REG_A1,
+ [PT_A0 << 2] = REG_A0,
+ [PT_D1 << 2] = REG_D1,
+ [PT_D0 << 2] = REG_D0,
+ [PT_ORIG_D0 << 2] = REG_ORIG_D0,
+ [PT_EPSW << 2] = REG_EPSW,
+ [PT_PC << 2] = REG_PC,
+};
+
+static inline int get_stack_long(struct task_struct *task, int offset)
+{
+ return *(unsigned long *)
+ ((unsigned long) task->thread.uregs + offset);
+}
+
+/*
+ * this routine will put a word on the processes privileged stack.
+ * the offset is how far from the base addr as stored in the TSS.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline
+int put_stack_long(struct task_struct *task, int offset, unsigned long data)
+{
+ unsigned long stack;
+
+ stack = (unsigned long) task->thread.uregs + offset;
+ *(unsigned long *) stack = data;
+ return 0;
+}
+
+static inline unsigned long get_fpregs(struct fpu_state_struct *buf,
+ struct task_struct *tsk)
+{
+ return __copy_to_user(buf, &tsk->thread.fpu_state,
+ sizeof(struct fpu_state_struct));
+}
+
+static inline unsigned long set_fpregs(struct task_struct *tsk,
+ struct fpu_state_struct *buf)
+{
+ return __copy_from_user(&tsk->thread.fpu_state, buf,
+ sizeof(struct fpu_state_struct));
+}
+
+static inline void fpsave_init(struct task_struct *task)
+{
+ memset(&task->thread.fpu_state, 0, sizeof(struct fpu_state_struct));
+}
+
+/*
+ * make sure the single step bit is not set
+ */
+void ptrace_disable(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+ struct user *dummy = NULL;
+ long tmp;
+
+ tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+ tmp &= ~EPSW_T;
+ put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+/*
+ * set the single step bit
+ */
+void ptrace_enable(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+ struct user *dummy = NULL;
+ long tmp;
+
+ tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+ tmp |= EPSW_T;
+ put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+/*
+ * handle the arch-specific side of process tracing
+ */
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+ struct fpu_state_struct fpu_state;
+ int i, ret;
+
+ switch (request) {
+ /* read the word at location addr. */
+ case PTRACE_PEEKTEXT: {
+ unsigned long tmp;
+ int copied;
+
+ copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+ ret = -EIO;
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, (unsigned long *) data);
+ break;
+ }
+
+ /* read the word at location addr. */
+ case PTRACE_PEEKDATA: {
+ unsigned long tmp;
+ int copied;
+
+ copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+ ret = -EIO;
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, (unsigned long *) data);
+ break;
+ }
+
+ /* read the word at location addr in the USER area. */
+ case PTRACE_PEEKUSR: {
+ unsigned long tmp;
+
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 ||
+ addr > sizeof(struct user) - 3)
+ break;
+
+ tmp = 0; /* Default return condition */
+ if (addr < NR_PTREGS << 2)
+ tmp = get_stack_long(child,
+ ptrace_regid_to_frame[addr]);
+ ret = put_user(tmp, (unsigned long *) data);
+ break;
+ }
+
+ /* write the word at location addr. */
+ case PTRACE_POKETEXT:
+ case PTRACE_POKEDATA:
+ if (access_process_vm(child, addr, &data, sizeof(data), 1) ==
+ sizeof(data))
+ ret = 0;
+ else
+ ret = -EIO;
+ break;
+
+ /* write the word at location addr in the USER area */
+ case PTRACE_POKEUSR:
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 ||
+ addr > sizeof(struct user) - 3)
+ break;
+
+ ret = 0;
+ if (addr < NR_PTREGS << 2)
+ ret = put_stack_long(child, ptrace_regid_to_frame[addr],
+ data);
+ break;
+
+ /* continue and stop at next (return from) syscall */
+ case PTRACE_SYSCALL:
+ /* restart after signal. */
+ case PTRACE_CONT:
+ ret = -EIO;
+ if ((unsigned long) data > _NSIG)
+ break;
+ if (request == PTRACE_SYSCALL)
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ else
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ child->exit_code = data;
+ ptrace_disable(child);
+ wake_up_process(child);
+ ret = 0;
+ break;
+
+ /*
+ * make the child exit
+ * - the best I can do is send it a sigkill
+ * - perhaps it should be put in the status that it wants to
+ * exit
+ */
+ case PTRACE_KILL:
+ ret = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+ child->exit_code = SIGKILL;
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+ ptrace_disable(child);
+ wake_up_process(child);
+ break;
+
+ case PTRACE_SINGLESTEP: /* set the trap flag. */
+#ifndef CONFIG_MN10300_USING_JTAG
+ ret = -EIO;
+ if ((unsigned long) data > _NSIG)
+ break;
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ ptrace_enable(child);
+ child->exit_code = data;
+ wake_up_process(child);
+ ret = 0;
+#else
+ ret = -EINVAL;
+#endif
+ break;
+
+ case PTRACE_DETACH: /* detach a process that was attached. */
+ ret = ptrace_detach(child, data);
+ break;
+
+ /* Get all gp regs from the child. */
+ case PTRACE_GETREGS: {
+ unsigned long tmp;
+
+ if (!access_ok(VERIFY_WRITE, (unsigned *) data, NR_PTREGS << 2)) {
+ ret = -EIO;
+ break;
+ }
+
+ for (i = 0; i < NR_PTREGS << 2; i += 4) {
+ tmp = get_stack_long(child, ptrace_regid_to_frame[i]);
+ __put_user(tmp, (unsigned long *) data);
+ data += sizeof(tmp);
+ }
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_SETREGS: { /* Set all gp regs in the child. */
+ unsigned long tmp;
+
+ if (!access_ok(VERIFY_READ, (unsigned long *)data,
+ sizeof(struct pt_regs))) {
+ ret = -EIO;
+ break;
+ }
+
+ for (i = 0; i < NR_PTREGS << 2; i += 4) {
+ __get_user(tmp, (unsigned long *) data);
+ put_stack_long(child, ptrace_regid_to_frame[i], tmp);
+ data += sizeof(tmp);
+ }
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_GETFPREGS: { /* Get the child FPU state. */
+ if (is_using_fpu(child)) {
+ unlazy_fpu(child);
+ fpu_state = child->thread.fpu_state;
+ } else {
+ memset(&fpu_state, 0, sizeof(fpu_state));
+ }
+
+ ret = -EIO;
+ if (copy_to_user((void *) data, &fpu_state,
+ sizeof(fpu_state)) == 0)
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_SETFPREGS: { /* Set the child FPU state. */
+ ret = -EFAULT;
+ if (copy_from_user(&fpu_state, (const void *) data,
+ sizeof(fpu_state)) == 0) {
+ fpu_kill_state(child);
+ child->thread.fpu_state = fpu_state;
+ set_using_fpu(child);
+ ret = 0;
+ }
+ break;
+ }
+
+ case PTRACE_SETOPTIONS: {
+ if (data & PTRACE_O_TRACESYSGOOD)
+ child->ptrace |= PT_TRACESYSGOOD;
+ else
+ child->ptrace &= ~PT_TRACESYSGOOD;
+ ret = 0;
+ break;
+ }
+
+ default:
+ ret = -EIO;
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+{
+#if 0
+ /* just in case... */
+ printk(KERN_DEBUG "[%d] syscall_%lu(%lx,%lx,%lx,%lx) = %lx\n",
+ current->pid,
+ regs->orig_d0,
+ regs->a0,
+ regs->d1,
+ regs->a3,
+ regs->a2,
+ regs->d0);
+ return;
+#endif
+
+ if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
+ !test_thread_flag(TIF_SINGLESTEP))
+ return;
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+
+ /* the 0x80 provides a way for the tracing parent to distinguish
+ between a syscall stop and SIGTRAP delivery */
+ ptrace_notify(SIGTRAP |
+ ((current->ptrace & PT_TRACESYSGOOD) &&
+ !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
+
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c
new file mode 100644
index 0000000..042f792
--- /dev/null
+++ b/arch/mn10300/kernel/rtc.c
@@ -0,0 +1,173 @@
+/* MN10300 RTC management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+#include <linux/timex.h>
+#include <asm/rtc-regs.h>
+#include <asm/rtc.h>
+
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+/* last time the RTC got updated */
+static long last_rtc_update;
+
+/* time for RTC to update itself in ioclks */
+static unsigned long mn10300_rtc_update_period;
+
+/*
+ * read the current RTC time
+ */
+unsigned long __init get_initial_rtc_time(void)
+{
+ struct rtc_time tm;
+
+ get_rtc_time(&tm);
+
+ return mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
+ * ms after the second nowtime has started, because when nowtime is written
+ * into the registers of the CMOS clock, it will jump to the next second
+ * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data
+ * sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ * sets the minutes. Usually you'll only notice that after reboot!
+ */
+static int set_rtc_mmss(unsigned long nowtime)
+{
+ unsigned char save_control, save_freq_select;
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+
+ /* gets recalled with irq locally disabled */
+ spin_lock(&rtc_lock);
+ save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being
+ * set */
+ CMOS_WRITE(save_control | RTC_SET, RTC_CONTROL);
+
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset
+ * prescaler */
+ CMOS_WRITE(save_freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
+
+ cmos_minutes = CMOS_READ(RTC_MINUTES);
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ BCD_TO_BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
+ /* correct for half hour time zone */
+ real_minutes += 30;
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ }
+ CMOS_WRITE(real_seconds, RTC_SECONDS);
+ CMOS_WRITE(real_minutes, RTC_MINUTES);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ /* The following flags have to be released exactly in this order,
+ * otherwise the DS12887 (popular MC146818A clone with integrated
+ * battery and quartz) will not reset the oscillator and will not
+ * update precisely 500 ms later. You won't find this mentioned in
+ * the Dallas Semiconductor data sheets, but who believes data
+ * sheets anyway ... -- Markus Kuhn
+ */
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+ spin_unlock(&rtc_lock);
+
+ return retval;
+}
+
+void check_rtc_time(void)
+{
+ /* the RTC clock just finished ticking over again this second
+ * - if we have an externally synchronized Linux clock, then update
+ * RTC clock accordingly every ~11 minutes. set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ */
+ if ((time_status & STA_UNSYNC) == 0 &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ xtime.tv_nsec / 1000 >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+ xtime.tv_nsec / 1000 <= 500000 + ((unsigned) TICK_SIZE) / 2
+ ) {
+ if (set_rtc_mmss(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ /* do it again in 60s */
+ last_rtc_update = xtime.tv_sec - 600;
+ }
+}
+
+/*
+ * calibrate the TSC clock against the RTC
+ */
+void __init calibrate_clock(void)
+{
+ unsigned long count0, counth, count1;
+ unsigned char status;
+
+ /* make sure the RTC is running and is set to operate in 24hr mode */
+ status = RTSRC;
+ RTCRB |= RTCRB_SET;
+ RTCRB |= RTCRB_TM_24HR;
+ RTCRA |= RTCRA_DVR;
+ RTCRA &= ~RTCRA_DVR;
+ RTCRB &= ~RTCRB_SET;
+
+ /* work out the clock speed by counting clock cycles between ends of
+ * the RTC update cycle - track the RTC through one complete update
+ * cycle (1 second)
+ */
+ startup_timestamp_counter();
+
+ while (!(RTCRA & RTCRA_UIP)) {}
+ while ((RTCRA & RTCRA_UIP)) {}
+
+ count0 = TMTSCBC;
+
+ while (!(RTCRA & RTCRA_UIP)) {}
+
+ counth = TMTSCBC;
+
+ while ((RTCRA & RTCRA_UIP)) {}
+
+ count1 = TMTSCBC;
+
+ shutdown_timestamp_counter();
+
+ MN10300_TSCCLK = count0 - count1; /* the timers count down */
+ mn10300_rtc_update_period = counth - count1;
+ MN10300_TSC_PER_HZ = MN10300_TSCCLK / HZ;
+}
diff --git a/arch/mn10300/kernel/semaphore.c b/arch/mn10300/kernel/semaphore.c
new file mode 100644
index 0000000..9153c40
--- /dev/null
+++ b/arch/mn10300/kernel/semaphore.c
@@ -0,0 +1,149 @@
+/* MN10300 Semaphore implementation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <asm/semaphore.h>
+
+struct sem_waiter {
+ struct list_head list;
+ struct task_struct *task;
+};
+
+#if SEMAPHORE_DEBUG
+void semtrace(struct semaphore *sem, const char *str)
+{
+ if (sem->debug)
+ printk(KERN_DEBUG "[%d] %s({%d,%d})\n",
+ current->pid,
+ str,
+ atomic_read(&sem->count),
+ list_empty(&sem->wait_list) ? 0 : 1);
+}
+#else
+#define semtrace(SEM, STR) do { } while (0)
+#endif
+
+/*
+ * wait for a token to be granted from a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+void __down(struct semaphore *sem, unsigned long flags)
+{
+ struct task_struct *tsk = current;
+ struct sem_waiter waiter;
+
+ semtrace(sem, "Entering __down");
+
+ /* set up my own style of waitqueue */
+ waiter.task = tsk;
+ get_task_struct(tsk);
+
+ list_add_tail(&waiter.list, &sem->wait_list);
+
+ /* we don't need to touch the semaphore struct anymore */
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+ /* wait to be given the semaphore */
+ set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+
+ for (;;) {
+ if (!waiter.task)
+ break;
+ schedule();
+ set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+ }
+
+ tsk->state = TASK_RUNNING;
+ semtrace(sem, "Leaving __down");
+}
+EXPORT_SYMBOL(__down);
+
+/*
+ * interruptibly wait for a token to be granted from a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+int __down_interruptible(struct semaphore *sem, unsigned long flags)
+{
+ struct task_struct *tsk = current;
+ struct sem_waiter waiter;
+ int ret;
+
+ semtrace(sem, "Entering __down_interruptible");
+
+ /* set up my own style of waitqueue */
+ waiter.task = tsk;
+ get_task_struct(tsk);
+
+ list_add_tail(&waiter.list, &sem->wait_list);
+
+ /* we don't need to touch the semaphore struct anymore */
+ set_task_state(tsk, TASK_INTERRUPTIBLE);
+
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+ /* wait to be given the semaphore */
+ ret = 0;
+ for (;;) {
+ if (!waiter.task)
+ break;
+ if (unlikely(signal_pending(current)))
+ goto interrupted;
+ schedule();
+ set_task_state(tsk, TASK_INTERRUPTIBLE);
+ }
+
+ out:
+ tsk->state = TASK_RUNNING;
+ semtrace(sem, "Leaving __down_interruptible");
+ return ret;
+
+ interrupted:
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ list_del(&waiter.list);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+ ret = 0;
+ if (!waiter.task) {
+ put_task_struct(current);
+ ret = -EINTR;
+ }
+ goto out;
+}
+EXPORT_SYMBOL(__down_interruptible);
+
+/*
+ * release a single token back to a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+void __up(struct semaphore *sem)
+{
+ struct task_struct *tsk;
+ struct sem_waiter *waiter;
+
+ semtrace(sem, "Entering __up");
+
+ /* grant the token to the process at the front of the queue */
+ waiter = list_entry(sem->wait_list.next, struct sem_waiter, list);
+
+ /* We must be careful not to touch 'waiter' after we set ->task = NULL.
+ * It is an allocated on the waiter's stack and may become invalid at
+ * any time after that point (due to a wakeup from another source).
+ */
+ list_del_init(&waiter->list);
+ tsk = waiter->task;
+ smp_mb();
+ waiter->task = NULL;
+ wake_up_process(tsk);
+ put_task_struct(tsk);
+
+ semtrace(sem, "Leaving __up");
+}
+EXPORT_SYMBOL(__up);
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
new file mode 100644
index 0000000..6b7ce26
--- /dev/null
+++ b/arch/mn10300/kernel/setup.c
@@ -0,0 +1,298 @@
+/* MN10300 Arch-specific initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <asm/processor.h>
+#include <linux/console.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/proc/proc.h>
+#include <asm/busctl-regs.h>
+#include <asm/fpu.h>
+#include <asm/sections.h>
+
+struct mn10300_cpuinfo boot_cpu_data;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0x18000000;
+
+char redboot_command_line[COMMAND_LINE_SIZE] =
+ "console=ttyS0,115200 root=/dev/mtdblock3 rw";
+
+char __initdata redboot_platform_name[COMMAND_LINE_SIZE];
+
+static struct resource code_resource = {
+ .start = 0x100000,
+ .end = 0,
+ .name = "Kernel code",
+};
+
+static struct resource data_resource = {
+ .start = 0,
+ .end = 0,
+ .name = "Kernel data",
+};
+
+static unsigned long __initdata phys_memory_base;
+static unsigned long __initdata phys_memory_end;
+static unsigned long __initdata memory_end;
+unsigned long memory_size;
+
+struct thread_info *__current_ti = &init_thread_union.thread_info;
+struct task_struct *__current = &init_task;
+
+#define mn10300_known_cpus 3
+static const char *const mn10300_cputypes[] = {
+ "am33v1",
+ "am33v2",
+ "am34v1",
+ "unknown"
+};
+
+/*
+ *
+ */
+static void __init parse_mem_cmdline(char **cmdline_p)
+{
+ char *from, *to, c;
+
+ /* save unparsed command line copy for /proc/cmdline */
+ strcpy(boot_command_line, redboot_command_line);
+
+ /* see if there's an explicit memory size option */
+ from = redboot_command_line;
+ to = redboot_command_line;
+ c = ' ';
+
+ for (;;) {
+ if (c == ' ' && !memcmp(from, "mem=", 4)) {
+ if (to != redboot_command_line)
+ to--;
+ memory_size = memparse(from + 4, &from);
+ }
+
+ c = *(from++);
+ if (!c)
+ break;
+
+ *(to++) = c;
+ }
+
+ *to = '\0';
+ *cmdline_p = redboot_command_line;
+
+ if (memory_size == 0)
+ panic("Memory size not known\n");
+
+ memory_end = (unsigned long) CONFIG_KERNEL_RAM_BASE_ADDRESS +
+ memory_size;
+ if (memory_end > phys_memory_end)
+ memory_end = phys_memory_end;
+}
+
+/*
+ * architecture specific setup
+ */
+void __init setup_arch(char **cmdline_p)
+{
+ unsigned long bootmap_size;
+ unsigned long kstart_pfn, start_pfn, free_pfn, end_pfn;
+
+ cpu_init();
+ unit_setup();
+ parse_mem_cmdline(cmdline_p);
+
+ init_mm.start_code = (unsigned long)&_text;
+ init_mm.end_code = (unsigned long) &_etext;
+ init_mm.end_data = (unsigned long) &_edata;
+ init_mm.brk = (unsigned long) &_end;
+
+ code_resource.start = virt_to_bus(&_text);
+ code_resource.end = virt_to_bus(&_etext)-1;
+ data_resource.start = virt_to_bus(&_etext);
+ data_resource.end = virt_to_bus(&_edata)-1;
+
+#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
+
+ start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT);
+ kstart_pfn = PFN_UP(__pa(&_text));
+ free_pfn = PFN_UP(__pa(&_end));
+ end_pfn = PFN_DOWN(__pa(memory_end));
+
+ bootmap_size = init_bootmem_node(&contig_page_data,
+ free_pfn,
+ start_pfn,
+ end_pfn);
+
+ if (kstart_pfn > start_pfn)
+ free_bootmem(PFN_PHYS(start_pfn),
+ PFN_PHYS(kstart_pfn - start_pfn));
+
+ free_bootmem(PFN_PHYS(free_pfn),
+ PFN_PHYS(end_pfn - free_pfn));
+
+ /* If interrupt vector table is in main ram, then we need to
+ reserve the page it is occupying. */
+ if (CONFIG_INTERRUPT_VECTOR_BASE >= CONFIG_KERNEL_RAM_BASE_ADDRESS &&
+ CONFIG_INTERRUPT_VECTOR_BASE < memory_end)
+ reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, 1,
+ BOOTMEM_DEFAULT);
+
+ reserve_bootmem(PAGE_ALIGN(PFN_PHYS(free_pfn)), bootmap_size,
+ BOOTMEM_DEFAULT);
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+
+ paging_init();
+}
+
+/*
+ * perform CPU initialisation
+ */
+void __init cpu_init(void)
+{
+ unsigned long cpurev = CPUREV, type;
+ unsigned long base, size;
+
+ type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S;
+ if (type > mn10300_known_cpus)
+ type = mn10300_known_cpus;
+
+ printk(KERN_INFO "Matsushita %s, rev %ld\n",
+ mn10300_cputypes[type],
+ (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S);
+
+ /* determine the memory size and base from the memory controller regs */
+ memory_size = 0;
+
+ base = SDBASE(0);
+ if (base & SDBASE_CE) {
+ size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
+ size = ~size + 1;
+ base &= SDBASE_CBA;
+
+ printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base);
+ memory_size += size;
+ phys_memory_base = base;
+ }
+
+ base = SDBASE(1);
+ if (base & SDBASE_CE) {
+ size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
+ size = ~size + 1;
+ base &= SDBASE_CBA;
+
+ printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base);
+ memory_size += size;
+ if (phys_memory_base == 0)
+ phys_memory_base = base;
+ }
+
+ phys_memory_end = phys_memory_base + memory_size;
+
+#ifdef CONFIG_FPU
+ fpu_init_state();
+#endif
+}
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ unsigned long cpurev = CPUREV, type, icachesz, dcachesz;
+
+ type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S;
+ if (type > mn10300_known_cpus)
+ type = mn10300_known_cpus;
+
+ icachesz =
+ ((cpurev & CPUREV_ICWAY ) >> CPUREV_ICWAY_S) *
+ ((cpurev & CPUREV_ICSIZE) >> CPUREV_ICSIZE_S) *
+ 1024;
+
+ dcachesz =
+ ((cpurev & CPUREV_DCWAY ) >> CPUREV_DCWAY_S) *
+ ((cpurev & CPUREV_DCSIZE) >> CPUREV_DCSIZE_S) *
+ 1024;
+
+ seq_printf(m,
+ "processor : 0\n"
+ "vendor_id : Matsushita\n"
+ "cpu core : %s\n"
+ "cpu rev : %lu\n"
+ "model name : " PROCESSOR_MODEL_NAME "\n"
+ "icache size: %lu\n"
+ "dcache size: %lu\n",
+ mn10300_cputypes[type],
+ (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S,
+ icachesz,
+ dcachesz
+ );
+
+ seq_printf(m,
+ "ioclk speed: %lu.%02luMHz\n"
+ "bogomips : %lu.%02lu\n\n",
+ MN10300_IOCLK / 1000000,
+ (MN10300_IOCLK / 10000) % 100,
+ loops_per_jiffy / (500000 / HZ),
+ (loops_per_jiffy / (5000 / HZ)) % 100
+ );
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
diff --git a/arch/mn10300/kernel/sigframe.h b/arch/mn10300/kernel/sigframe.h
new file mode 100644
index 0000000..0decba2
--- /dev/null
+++ b/arch/mn10300/kernel/sigframe.h
@@ -0,0 +1,33 @@
+/* MN10300 Signal frame definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+struct sigframe
+{
+ void (*pretcode)(void);
+ int sig;
+ struct sigcontext *psc;
+ struct sigcontext sc;
+ struct fpucontext fpuctx;
+ unsigned long extramask[_NSIG_WORDS-1];
+ char retcode[8];
+};
+
+struct rt_sigframe
+{
+ void (*pretcode)(void);
+ int sig;
+ struct siginfo *pinfo;
+ void *puc;
+ struct siginfo info;
+ struct ucontext uc;
+ struct fpucontext fpuctx;
+ char retcode[8];
+};
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
new file mode 100644
index 0000000..841ca99
--- /dev/null
+++ b/arch/mn10300/kernel/signal.c
@@ -0,0 +1,564 @@
+/* MN10300 Signal handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/tty.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/fpu.h>
+#include "sigframe.h"
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+ mask &= _BLOCKABLE;
+ spin_lock_irq(¤t->sighand->siglock);
+ current->saved_sigmask = current->blocked;
+ siginitset(¤t->blocked, mask);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
+}
+
+/*
+ * set signal action syscall
+ */
+asmlinkage long sys_sigaction(int sig,
+ const struct old_sigaction __user *act,
+ struct old_sigaction __user *oact)
+{
+ struct k_sigaction new_ka, old_ka;
+ int ret;
+
+ if (act) {
+ old_sigset_t mask;
+ if (verify_area(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+ return -EFAULT;
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ __get_user(mask, &act->sa_mask);
+ siginitset(&new_ka.sa.sa_mask, mask);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ if (verify_area(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+ return -EFAULT;
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return ret;
+}
+
+/*
+ * set alternate signal stack syscall
+ */
+asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t *uoss)
+{
+ return do_sigaltstack(uss, uoss, __frame->sp);
+}
+
+/*
+ * do a signal return; undo the signal stack.
+ */
+static int restore_sigcontext(struct pt_regs *regs,
+ struct sigcontext __user *sc, long *_d0)
+{
+ unsigned int err = 0;
+
+ if (is_using_fpu(current))
+ fpu_kill_state(current);
+
+#define COPY(x) err |= __get_user(regs->x, &sc->x)
+ COPY(d1); COPY(d2); COPY(d3);
+ COPY(a0); COPY(a1); COPY(a2); COPY(a3);
+ COPY(e0); COPY(e1); COPY(e2); COPY(e3);
+ COPY(e4); COPY(e5); COPY(e6); COPY(e7);
+ COPY(lar); COPY(lir);
+ COPY(mdr); COPY(mdrq);
+ COPY(mcvf); COPY(mcrl); COPY(mcrh);
+ COPY(sp); COPY(pc);
+#undef COPY
+
+ {
+ unsigned int tmpflags;
+#ifndef CONFIG_MN10300_USING_JTAG
+#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \
+ EPSW_T | EPSW_nAR)
+#else
+#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \
+ EPSW_nAR)
+#endif
+ err |= __get_user(tmpflags, &sc->epsw);
+ regs->epsw = (regs->epsw & ~USER_EPSW) |
+ (tmpflags & USER_EPSW);
+ regs->orig_d0 = -1; /* disable syscall checks */
+ }
+
+ {
+ struct fpucontext *buf;
+ err |= __get_user(buf, &sc->fpucontext);
+ if (buf) {
+ if (verify_area(VERIFY_READ, buf, sizeof(*buf)))
+ goto badframe;
+ err |= fpu_restore_sigcontext(buf);
+ }
+ }
+
+ err |= __get_user(*_d0, &sc->d0);
+ return err;
+
+badframe:
+ return 1;
+}
+
+/*
+ * standard signal return syscall
+ */
+asmlinkage long sys_sigreturn(void)
+{
+ struct sigframe __user *frame = (struct sigframe __user *) __frame->sp;
+ sigset_t set;
+ long d0;
+
+ if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__get_user(set.sig[0], &frame->sc.oldmask))
+ goto badframe;
+
+ if (_NSIG_WORDS > 1 &&
+ __copy_from_user(&set.sig[1], &frame->extramask,
+ sizeof(frame->extramask)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(__frame, &frame->sc, &d0))
+ goto badframe;
+
+ return d0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * realtime signal return syscall
+ */
+asmlinkage long sys_rt_sigreturn(void)
+{
+ struct rt_sigframe __user *frame =
+ (struct rt_sigframe __user *) __frame->sp;
+ sigset_t set;
+ unsigned long d0;
+
+ if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(__frame, &frame->uc.uc_mcontext, &d0))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, __frame->sp) == -EFAULT)
+ goto badframe;
+
+ return d0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * store the userspace context into a signal frame
+ */
+static int setup_sigcontext(struct sigcontext __user *sc,
+ struct fpucontext *fpuctx,
+ struct pt_regs *regs,
+ unsigned long mask)
+{
+ int tmp, err = 0;
+
+#define COPY(x) err |= __put_user(regs->x, &sc->x)
+ COPY(d0); COPY(d1); COPY(d2); COPY(d3);
+ COPY(a0); COPY(a1); COPY(a2); COPY(a3);
+ COPY(e0); COPY(e1); COPY(e2); COPY(e3);
+ COPY(e4); COPY(e5); COPY(e6); COPY(e7);
+ COPY(lar); COPY(lir);
+ COPY(mdr); COPY(mdrq);
+ COPY(mcvf); COPY(mcrl); COPY(mcrh);
+ COPY(sp); COPY(epsw); COPY(pc);
+#undef COPY
+
+ tmp = fpu_setup_sigcontext(fpuctx);
+ if (tmp < 0)
+ err = 1;
+ else
+ err |= __put_user(tmp ? fpuctx : NULL, &sc->fpucontext);
+
+ /* non-iBCS2 extensions.. */
+ err |= __put_user(mask, &sc->oldmask);
+
+ return err;
+}
+
+/*
+ * determine which stack to use..
+ */
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+ struct pt_regs *regs,
+ size_t frame_size)
+{
+ unsigned long sp;
+
+ /* default to using normal stack */
+ sp = regs->sp;
+
+ /* this is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (!on_sig_stack(sp))
+ sp = current->sas_ss_sp + current->sas_ss_size;
+ }
+
+ return (void __user *) ((sp - frame_size) & ~7UL);
+}
+
+/*
+ * set up a normal signal frame
+ */
+static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
+ struct pt_regs *regs)
+{
+ struct sigframe __user *frame;
+ int rsig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ rsig = sig;
+ if (sig < 32 &&
+ current_thread_info()->exec_domain &&
+ current_thread_info()->exec_domain->signal_invmap)
+ rsig = current_thread_info()->exec_domain->signal_invmap[sig];
+
+ if (__put_user(rsig, &frame->sig) < 0 ||
+ __put_user(&frame->sc, &frame->psc) < 0)
+ goto give_sigsegv;
+
+ if (setup_sigcontext(&frame->sc, &frame->fpuctx, regs, set->sig[0]))
+ goto give_sigsegv;
+
+ if (_NSIG_WORDS > 1) {
+ if (__copy_to_user(frame->extramask, &set->sig[1],
+ sizeof(frame->extramask)))
+ goto give_sigsegv;
+ }
+
+ /* set up to return from userspace. If provided, use a stub already in
+ * userspace */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ if (__put_user(ka->sa.sa_restorer, &frame->pretcode))
+ goto give_sigsegv;
+ } else {
+ if (__put_user((void (*)(void))frame->retcode,
+ &frame->pretcode))
+ goto give_sigsegv;
+ /* this is mov $,d0; syscall 0 */
+ if (__put_user(0x2c, (char *)(frame->retcode + 0)) ||
+ __put_user(__NR_sigreturn, (char *)(frame->retcode + 1)) ||
+ __put_user(0x00, (char *)(frame->retcode + 2)) ||
+ __put_user(0xf0, (char *)(frame->retcode + 3)) ||
+ __put_user(0xe0, (char *)(frame->retcode + 4)))
+ goto give_sigsegv;
+ flush_icache_range((unsigned long) frame->retcode,
+ (unsigned long) frame->retcode + 5);
+ }
+
+ /* set up registers for signal handler */
+ regs->sp = (unsigned long) frame;
+ regs->pc = (unsigned long) ka->sa.sa_handler;
+ regs->d0 = sig;
+ regs->d1 = (unsigned long) &frame->sc;
+
+ set_fs(USER_DS);
+
+ /* the tracer may want to single-step inside the handler */
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+ printk(KERN_DEBUG "SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
+ sig, current->comm, current->pid, frame, regs->pc,
+ frame->pretcode);
+#endif
+
+ return 0;
+
+give_sigsegv:
+ force_sig(SIGSEGV, current);
+ return -EFAULT;
+}
+
+/*
+ * set up a realtime signal frame
+ */
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame;
+ int rsig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ rsig = sig;
+ if (sig < 32 &&
+ current_thread_info()->exec_domain &&
+ current_thread_info()->exec_domain->signal_invmap)
+ rsig = current_thread_info()->exec_domain->signal_invmap[sig];
+
+ if (__put_user(rsig, &frame->sig) ||
+ __put_user(&frame->info, &frame->pinfo) ||
+ __put_user(&frame->uc, &frame->puc) ||
+ copy_siginfo_to_user(&frame->info, info))
+ goto give_sigsegv;
+
+ /* create the ucontext. */
+ if (__put_user(0, &frame->uc.uc_flags) ||
+ __put_user(0, &frame->uc.uc_link) ||
+ __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp) ||
+ __put_user(sas_ss_flags(regs->sp), &frame->uc.uc_stack.ss_flags) ||
+ __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size) ||
+ setup_sigcontext(&frame->uc.uc_mcontext,
+ &frame->fpuctx, regs, set->sig[0]) ||
+ __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)))
+ goto give_sigsegv;
+
+ /* set up to return from userspace. If provided, use a stub already in
+ * userspace */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ if (__put_user(ka->sa.sa_restorer, &frame->pretcode))
+ goto give_sigsegv;
+ } else {
+ if (__put_user((void(*)(void))frame->retcode,
+ &frame->pretcode) ||
+ /* This is mov $,d0; syscall 0 */
+ __put_user(0x2c, (char *)(frame->retcode + 0)) ||
+ __put_user(__NR_rt_sigreturn,
+ (char *)(frame->retcode + 1)) ||
+ __put_user(0x00, (char *)(frame->retcode + 2)) ||
+ __put_user(0xf0, (char *)(frame->retcode + 3)) ||
+ __put_user(0xe0, (char *)(frame->retcode + 4)))
+ goto give_sigsegv;
+
+ flush_icache_range((u_long) frame->retcode,
+ (u_long) frame->retcode + 5);
+ }
+
+ /* Set up registers for signal handler */
+ regs->sp = (unsigned long) frame;
+ regs->pc = (unsigned long) ka->sa.sa_handler;
+ regs->d0 = sig;
+ regs->d1 = (long) &frame->info;
+
+ set_fs(USER_DS);
+
+ /* the tracer may want to single-step inside the handler */
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+ printk(KERN_DEBUG "SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
+ sig, current->comm, current->pid, frame, regs->pc,
+ frame->pretcode);
+#endif
+
+ return 0;
+
+give_sigsegv:
+ force_sig(SIGSEGV, current);
+ return -EFAULT;
+}
+
+/*
+ * handle the actual delivery of a signal to userspace
+ */
+static int handle_signal(int sig,
+ siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs *regs)
+{
+ int ret;
+
+ /* Are we from a system call? */
+ if (regs->orig_d0 >= 0) {
+ /* If so, check system call restarting.. */
+ switch (regs->d0) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->d0 = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->d0 = -EINTR;
+ break;
+ }
+
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ regs->d0 = regs->orig_d0;
+ regs->pc -= 2;
+ }
+ }
+
+ /* Set up the stack frame */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
+ else
+ ret = setup_frame(sig, ka, oldset, regs);
+
+ if (ret == 0) {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked, ¤t->blocked,
+ &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+
+ return ret;
+}
+
+/*
+ * handle a potential signal
+ */
+static void do_signal(struct pt_regs *regs)
+{
+ struct k_sigaction ka;
+ siginfo_t info;
+ sigset_t *oldset;
+ int signr;
+
+ /* we want the common case to go fast, which is why we may in certain
+ * cases get here from kernel mode */
+ if (!user_mode(regs))
+ return;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
+ oldset = ¤t->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+
+ return;
+ }
+
+ /* did we come from a system call? */
+ if (regs->orig_d0 >= 0) {
+ /* restart the system call - no handlers present */
+ switch (regs->d0) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ regs->d0 = regs->orig_d0;
+ regs->pc -= 2;
+ break;
+
+ case -ERESTART_RESTARTBLOCK:
+ regs->d0 = __NR_restart_syscall;
+ regs->pc -= 2;
+ break;
+ }
+ }
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by current->work.notify_resume
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
+{
+ /* Pending single-step? */
+ if (thread_info_flags & _TIF_SINGLESTEP) {
+#ifndef CONFIG_MN10300_USING_JTAG
+ regs->epsw |= EPSW_T;
+ clear_thread_flag(TIF_SINGLESTEP);
+#else
+ BUG(); /* no h/w single-step if using JTAG unit */
+#endif
+ }
+
+ /* deal with pending signal delivery */
+ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+ do_signal(regs);
+}
diff --git a/arch/mn10300/kernel/switch_to.S b/arch/mn10300/kernel/switch_to.S
new file mode 100644
index 0000000..630aad7
--- /dev/null
+++ b/arch/mn10300/kernel/switch_to.S
@@ -0,0 +1,71 @@
+###############################################################################
+#
+# MN10300 Context switch operation
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/cpu-regs.h>
+
+ .text
+
+###############################################################################
+#
+# struct task_struct *__switch_to(struct thread_struct *prev,
+# struct thread_struct *next,
+# struct task_struct *prev_task)
+#
+###############################################################################
+ENTRY(__switch_to)
+ movm [d2,d3,a2,a3,exreg1],(sp)
+ or EPSW_NMID,epsw
+
+ mov (44,sp),d2
+
+ mov d0,a0
+ mov d1,a1
+
+ # save prev context
+ mov (__frame),d0
+ mov d0,(THREAD_FRAME,a0)
+ mov __switch_back,d0
+ mov d0,(THREAD_PC,a0)
+ mov sp,a2
+ mov a2,(THREAD_SP,a0)
+ mov a3,(THREAD_A3,a0)
+
+ mov (THREAD_A3,a1),a3
+ mov (THREAD_SP,a1),a2
+
+ # switch
+ mov a2,sp
+
+ # load next context
+ GET_THREAD_INFO a2
+ mov a2,(__current_ti)
+ mov (TI_task,a2),a2
+ mov a2,(__current)
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ mov a2,e2
+#endif
+
+ mov (THREAD_FRAME,a1),a2
+ mov a2,(__frame)
+ mov (THREAD_PC,a1),a2
+ mov d2,d0 # for ret_from_fork
+ mov d0,a0 # for __switch_to
+
+ jmp (a2)
+
+__switch_back:
+ and ~EPSW_NMID,epsw
+ ret [d2,d3,a2,a3,exreg1],32
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
new file mode 100644
index 0000000..5f17a1e
--- /dev/null
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -0,0 +1,193 @@
+/* MN10300 Weird system calls
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/syscalls.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+#include <linux/syscalls.h>
+#include <linux/tty.h>
+
+#include <asm/uaccess.h>
+
+#define MIN_MAP_ADDR PAGE_SIZE /* minimum fixed mmap address */
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage long sys_pipe(unsigned long __user *fildes)
+{
+ int fd[2];
+ int error;
+
+ error = do_pipe(fd);
+ if (!error) {
+ if (copy_to_user(fildes, fd, 2 * sizeof(int)))
+ error = -EFAULT;
+ }
+ return error;
+}
+
+/*
+ * memory mapping syscall
+ */
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ struct file *file = NULL;
+ long error = -EINVAL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+
+ if (flags & MAP_FIXED && addr < MIN_MAP_ADDR)
+ goto out;
+
+ error = -EBADF;
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(¤t->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(¤t->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+out:
+ return error;
+}
+
+asmlinkage long old_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long offset)
+{
+ if (offset & ~PAGE_MASK)
+ return -EINVAL;
+ return sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+}
+
+struct sel_arg_struct {
+ unsigned long n;
+ fd_set *inp;
+ fd_set *outp;
+ fd_set *exp;
+ struct timeval *tvp;
+};
+
+asmlinkage int old_select(struct sel_arg_struct __user *arg)
+{
+ struct sel_arg_struct a;
+
+ if (copy_from_user(&a, arg, sizeof(a)))
+ return -EFAULT;
+ /* sys_select() does the appropriate kernel locking */
+ return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+asmlinkage long sys_ipc(uint call, int first, int second,
+ int third, void __user *ptr, long fifth)
+{
+ int version, ret;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ switch (call) {
+ case SEMOP:
+ return sys_semtimedop(first, (struct sembuf __user *)ptr,
+ second, NULL);
+ case SEMTIMEDOP:
+ return sys_semtimedop(first, (struct sembuf __user *)ptr,
+ second,
+ (const struct timespec __user *)fifth);
+ case SEMGET:
+ return sys_semget(first, second, third);
+ case SEMCTL: {
+ union semun fourth;
+ if (!ptr)
+ return -EINVAL;
+ if (get_user(fourth.__pad, (void __user * __user *) ptr))
+ return -EFAULT;
+ return sys_semctl(first, second, third, fourth);
+ }
+
+ case MSGSND:
+ return sys_msgsnd(first, (struct msgbuf __user *) ptr,
+ second, third);
+ case MSGRCV:
+ switch (version) {
+ case 0: {
+ struct ipc_kludge tmp;
+ if (!ptr)
+ return -EINVAL;
+
+ if (copy_from_user(&tmp,
+ (struct ipc_kludge __user *) ptr,
+ sizeof(tmp)))
+ return -EFAULT;
+ return sys_msgrcv(first, tmp.msgp, second,
+ tmp.msgtyp, third);
+ }
+ default:
+ return sys_msgrcv(first,
+ (struct msgbuf __user *) ptr,
+ second, fifth, third);
+ }
+ case MSGGET:
+ return sys_msgget((key_t) first, second);
+ case MSGCTL:
+ return sys_msgctl(first, second,
+ (struct msqid_ds __user *) ptr);
+
+ case SHMAT:
+ switch (version) {
+ default: {
+ ulong raddr;
+ ret = do_shmat(first, (char __user *) ptr, second,
+ &raddr);
+ if (ret)
+ return ret;
+ return put_user(raddr, (ulong *) third);
+ }
+ case 1: /* iBCS2 emulator entry point */
+ if (!segment_eq(get_fs(), get_ds()))
+ return -EINVAL;
+ return do_shmat(first, (char __user *) ptr, second,
+ (ulong *) third);
+ }
+ case SHMDT:
+ return sys_shmdt((char __user *)ptr);
+ case SHMGET:
+ return sys_shmget(first, second, third);
+ case SHMCTL:
+ return sys_shmctl(first, second,
+ (struct shmid_ds __user *) ptr);
+ default:
+ return -EINVAL;
+ }
+}
diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c
new file mode 100644
index 0000000..ff492e3
--- /dev/null
+++ b/arch/mn10300/kernel/time.c
@@ -0,0 +1,129 @@
+/* MN10300 Low level time management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/kernel/time.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/profile.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc.h>
+
+#ifdef CONFIG_MN10300_RTC
+unsigned long mn10300_ioclk; /* system I/O clock frequency */
+unsigned long mn10300_iobclk; /* system I/O clock frequency */
+unsigned long mn10300_tsc_per_HZ; /* number of ioclks per jiffy */
+#endif /* CONFIG_MN10300_RTC */
+
+static unsigned long mn10300_last_tsc; /* time-stamp counter at last time
+ * interrupt occurred */
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+static struct irqaction timer_irq = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER,
+ .mask = CPU_MASK_NONE,
+ .name = "timer",
+};
+
+/*
+ * scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ union {
+ unsigned long long l;
+ u32 w[2];
+ } quot;
+
+ quot.w[0] = mn10300_last_tsc - get_cycles();
+ quot.w[1] = 1000000000;
+
+ asm("mulu %2,%3,%0,%1"
+ : "=r"(quot.w[1]), "=r"(quot.w[0])
+ : "0"(quot.w[1]), "1"(quot.w[0])
+ : "cc");
+
+ do_div(quot.l, MN10300_TSCCLK);
+
+ return quot.l;
+}
+
+/*
+ * advance the kernel's time keeping clocks (xtime and jiffies)
+ * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time
+ * there's a need to update
+ */
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ unsigned tsc, elapse;
+
+ write_seqlock(&xtime_lock);
+
+ while (tsc = get_cycles(),
+ elapse = mn10300_last_tsc - tsc, /* time elapsed since last
+ * tick */
+ elapse > MN10300_TSC_PER_HZ
+ ) {
+ mn10300_last_tsc -= MN10300_TSC_PER_HZ;
+
+ /* advance the kernel's time tracking system */
+ profile_tick(CPU_PROFILING);
+ do_timer(1);
+ update_process_times(user_mode(get_irq_regs()));
+ check_rtc_time();
+ }
+
+ write_sequnlock(&xtime_lock);
+ return IRQ_HANDLED;
+}
+
+/*
+ * initialise the various timers used by the main part of the kernel
+ */
+void __init time_init(void)
+{
+ /* we need the prescalar running to be able to use IOCLK/8
+ * - IOCLK runs at 1/4 (ST5 open) or 1/8 (ST5 closed) internal CPU clock
+ * - IOCLK runs at Fosc rate (crystal speed)
+ */
+ TMPSCNT |= TMPSCNT_ENABLE;
+
+ startup_timestamp_counter();
+
+ printk(KERN_INFO
+ "timestamp counter I/O clock running at %lu.%02lu"
+ " (calibrated against RTC)\n",
+ MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100);
+
+ xtime.tv_sec = get_initial_rtc_time();
+ xtime.tv_nsec = 0;
+
+ mn10300_last_tsc = TMTSCBC;
+
+ /* use timer 0 & 1 cascaded to tick at as close to HZ as possible */
+ setup_irq(TMJCIRQ, &timer_irq);
+
+ set_intr_level(TMJCIRQ, TMJCICR_LEVEL);
+
+ startup_jiffies_counter();
+
+#ifdef CONFIG_MN10300_WD_TIMER
+ /* start the watchdog timer */
+ watchdog_go();
+#endif
+}
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
new file mode 100644
index 0000000..8b9dc6d
--- /dev/null
+++ b/arch/mn10300/kernel/traps.c
@@ -0,0 +1,619 @@
+/* MN10300 Exception handling
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/pci.h>
+#include <linux/kdebug.h>
+#include <linux/bug.h>
+#include <linux/irq.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/fpu.h>
+#include <asm/gdb-stub.h>
+#include <asm/sections.h>
+
+#if (CONFIG_INTERRUPT_VECTOR_BASE & 0xffffff)
+#error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!"
+#endif
+
+struct pt_regs *__frame; /* current frame pointer */
+EXPORT_SYMBOL(__frame);
+
+int kstack_depth_to_print = 24;
+
+spinlock_t die_lock = __SPIN_LOCK_UNLOCKED(die_lock);
+
+ATOMIC_NOTIFIER_HEAD(mn10300_die_chain);
+
+/*
+ * These constants are for searching for possible module text
+ * segments. MODULE_RANGE is a guess of how much space is likely
+ * to be vmalloced.
+ */
+#define MODULE_RANGE (8 * 1024 * 1024)
+
+#define DO_ERROR(signr, prologue, str, name) \
+asmlinkage void name(struct pt_regs *regs, u32 intcode) \
+{ \
+ prologue; \
+ if (die_if_no_fixup(str, regs, intcode)) \
+ return; \
+ force_sig(signr, current); \
+}
+
+#define DO_EINFO(signr, prologue, str, name, sicode) \
+asmlinkage void name(struct pt_regs *regs, u32 intcode) \
+{ \
+ siginfo_t info; \
+ prologue; \
+ if (die_if_no_fixup(str, regs, intcode)) \
+ return; \
+ info.si_signo = signr; \
+ if (signr == SIGILL && sicode == ILL_ILLOPC) { \
+ uint8_t opcode; \
+ if (get_user(opcode, (uint8_t __user *)regs->pc) == 0) \
+ if (opcode == 0xff) \
+ info.si_signo = SIGTRAP; \
+ } \
+ info.si_errno = 0; \
+ info.si_code = sicode; \
+ info.si_addr = (void *) regs->pc; \
+ force_sig_info(info.si_signo, &info, current); \
+}
+
+DO_ERROR(SIGTRAP, {}, "trap", trap);
+DO_ERROR(SIGSEGV, {}, "ibreak", ibreak);
+DO_ERROR(SIGSEGV, {}, "obreak", obreak);
+DO_EINFO(SIGSEGV, {}, "access error", access_error, SEGV_ACCERR);
+DO_EINFO(SIGSEGV, {}, "insn access error", insn_acc_error, SEGV_ACCERR);
+DO_EINFO(SIGSEGV, {}, "data access error", data_acc_error, SEGV_ACCERR);
+DO_EINFO(SIGILL, {}, "privileged opcode", priv_op, ILL_PRVOPC);
+DO_EINFO(SIGILL, {}, "invalid opcode", invalid_op, ILL_ILLOPC);
+DO_EINFO(SIGILL, {}, "invalid ex opcode", invalid_exop, ILL_ILLOPC);
+DO_EINFO(SIGBUS, {}, "invalid address", mem_error, BUS_ADRERR);
+DO_EINFO(SIGBUS, {}, "bus error", bus_error, BUS_ADRERR);
+DO_EINFO(SIGILL, {}, "FPU invalid opcode", fpu_invalid_op, ILL_COPROC);
+
+DO_ERROR(SIGTRAP,
+#ifndef CONFIG_MN10300_USING_JTAG
+ DCR &= ~0x0001,
+#else
+ {},
+#endif
+ "single step", istep);
+
+/*
+ * handle NMI
+ */
+asmlinkage void nmi(struct pt_regs *regs, enum exception_code code)
+{
+ /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_intercept(regs, code))
+ return;
+#endif
+
+ printk(KERN_WARNING "--- Register Dump ---\n");
+ show_registers(regs);
+ printk(KERN_WARNING "---------------------\n");
+}
+
+/*
+ * show a stack trace from the specified stack pointer
+ */
+void show_trace(unsigned long *sp)
+{
+ unsigned long *stack, addr, module_start, module_end;
+ int i;
+
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "Call Trace:");
+
+ stack = sp;
+ i = 0;
+ module_start = VMALLOC_START;
+ module_end = VMALLOC_END;
+
+ while (((long) stack & (THREAD_SIZE - 1)) != 0) {
+ addr = *stack++;
+ if (__kernel_text_address(addr)) {
+#if 1
+ printk(" [<%08lx>]", addr);
+ print_symbol(" %s", addr);
+ printk("\n");
+#else
+ if ((i % 6) == 0)
+ printk("\n" KERN_EMERG " ");
+ printk("[<%08lx>] ", addr);
+ i++;
+#endif
+ }
+ }
+
+ printk("\n");
+}
+
+/*
+ * show the raw stack from the specified stack pointer
+ */
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+ unsigned long *stack;
+ int i;
+
+ if (!sp)
+ sp = (unsigned long *) &sp;
+
+ stack = sp;
+ printk(KERN_EMERG "Stack:");
+ for (i = 0; i < kstack_depth_to_print; i++) {
+ if (((long) stack & (THREAD_SIZE - 1)) == 0)
+ break;
+ if ((i % 8) == 0)
+ printk("\n" KERN_EMERG " ");
+ printk("%08lx ", *stack++);
+ }
+
+ show_trace(sp);
+}
+
+/*
+ * the architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+ unsigned long stack;
+
+ show_stack(current, &stack);
+}
+EXPORT_SYMBOL(dump_stack);
+
+/*
+ * dump the register file in the specified exception frame
+ */
+void show_registers_only(struct pt_regs *regs)
+{
+ unsigned long ssp;
+
+ ssp = (unsigned long) regs + sizeof(*regs);
+
+ printk(KERN_EMERG "PC: %08lx EPSW: %08lx SSP: %08lx mode: %s\n",
+ regs->pc, regs->epsw, ssp, user_mode(regs) ? "User" : "Super");
+ printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
+ regs->d0, regs->d1, regs->d2, regs->d3);
+ printk(KERN_EMERG "a0: %08lx a1: %08lx a2: %08lx a3: %08lx\n",
+ regs->a0, regs->a1, regs->a2, regs->a3);
+ printk(KERN_EMERG "e0: %08lx e1: %08lx e2: %08lx e3: %08lx\n",
+ regs->e0, regs->e1, regs->e2, regs->e3);
+ printk(KERN_EMERG "e4: %08lx e5: %08lx e6: %08lx e7: %08lx\n",
+ regs->e4, regs->e5, regs->e6, regs->e7);
+ printk(KERN_EMERG "lar: %08lx lir: %08lx mdr: %08lx usp: %08lx\n",
+ regs->lar, regs->lir, regs->mdr, regs->sp);
+ printk(KERN_EMERG "cvf: %08lx crl: %08lx crh: %08lx drq: %08lx\n",
+ regs->mcvf, regs->mcrl, regs->mcrh, regs->mdrq);
+ printk(KERN_EMERG "threadinfo=%p task=%p)\n",
+ current_thread_info(), current);
+
+ if ((unsigned long) current >= 0x90000000UL &&
+ (unsigned long) current < 0x94000000UL)
+ printk(KERN_EMERG "Process %s (pid: %d)\n",
+ current->comm, current->pid);
+
+ printk(KERN_EMERG "CPUP: %04hx\n", CPUP);
+ printk(KERN_EMERG "TBR: %08x\n", TBR);
+ printk(KERN_EMERG "DEAR: %08x\n", DEAR);
+ printk(KERN_EMERG "sISR: %08x\n", sISR);
+ printk(KERN_EMERG "NMICR: %04hx\n", NMICR);
+ printk(KERN_EMERG "BCBERR: %08x\n", BCBERR);
+ printk(KERN_EMERG "BCBEAR: %08x\n", BCBEAR);
+ printk(KERN_EMERG "MMUFCR: %08x\n", MMUFCR);
+ printk(KERN_EMERG "IPTEU : %08x IPTEL2: %08x\n", IPTEU, IPTEL2);
+ printk(KERN_EMERG "DPTEU: %08x DPTEL2: %08x\n", DPTEU, DPTEL2);
+}
+
+/*
+ * dump the registers and the stack
+ */
+void show_registers(struct pt_regs *regs)
+{
+ unsigned long sp;
+ int i;
+
+ show_registers_only(regs);
+
+ if (!user_mode(regs))
+ sp = (unsigned long) regs + sizeof(*regs);
+ else
+ sp = regs->sp;
+
+ /* when in-kernel, we also print out the stack and code at the
+ * time of the fault..
+ */
+ if (!user_mode(regs)) {
+ printk(KERN_EMERG "\n");
+ show_stack(current, (unsigned long *) sp);
+
+#if 0
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "Code: ");
+ if (regs->pc < PAGE_OFFSET)
+ goto bad;
+
+ for (i = 0; i < 20; i++) {
+ unsigned char c;
+ if (__get_user(c, &((unsigned char *) regs->pc)[i]))
+ goto bad;
+ printk("%02x ", c);
+ }
+#else
+ i = 0;
+#endif
+ }
+
+ printk("\n");
+ return;
+
+#if 0
+bad:
+ printk(KERN_EMERG " Bad PC value.");
+ break;
+#endif
+}
+
+/*
+ *
+ */
+void show_trace_task(struct task_struct *tsk)
+{
+ unsigned long sp = tsk->thread.sp;
+
+ /* User space on another CPU? */
+ if ((sp ^ (unsigned long) tsk) & (PAGE_MASK << 1))
+ return;
+
+ show_trace((unsigned long *) sp);
+}
+
+/*
+ * note the untimely death of part of the kernel
+ */
+void die(const char *str, struct pt_regs *regs, enum exception_code code)
+{
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "%s: %04x\n",
+ str, code & 0xffff);
+ show_registers(regs);
+
+ if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
+ (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
+ printk(KERN_EMERG "Exception in usermode interrupt handler\n");
+ printk(KERN_EMERG "\n"
+ KERN_EMERG " Please connect to kernel debugger !!\n");
+ asm volatile ("0: bra 0b");
+ }
+
+ spin_unlock_irq(&die_lock);
+ do_exit(SIGSEGV);
+}
+
+/*
+ * see if there's a fixup handler we can force a jump to when an exception
+ * happens due to something kernel code did
+ */
+int die_if_no_fixup(const char *str, struct pt_regs *regs,
+ enum exception_code code)
+{
+ if (user_mode(regs))
+ return 0;
+
+ peripheral_leds_display_exception(code);
+
+ switch (code) {
+ /* see if we can fixup the kernel accessing memory */
+ case EXCEP_ITLBMISS:
+ case EXCEP_DTLBMISS:
+ case EXCEP_IAERROR:
+ case EXCEP_DAERROR:
+ case EXCEP_MEMERR:
+ case EXCEP_MISALIGN:
+ case EXCEP_BUSERROR:
+ case EXCEP_ILLDATACC:
+ case EXCEP_IOINSACC:
+ case EXCEP_PRIVINSACC:
+ case EXCEP_PRIVDATACC:
+ case EXCEP_DATINSACC:
+ if (fixup_exception(regs))
+ return 1;
+ case EXCEP_UNIMPINS:
+ if (regs->pc && *(uint8_t *)regs->pc == 0xff)
+ if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))
+ return 1;
+ break;
+ default:
+ break;
+ }
+
+ /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_intercept(regs, code))
+ return 1;
+#endif
+
+ if (notify_die(DIE_GPF, str, regs, code, 0, 0))
+ return 1;
+
+ /* make the process die as the last resort */
+ die(str, regs, code);
+}
+
+/*
+ * handle unsupported syscall instructions (syscall 1-15)
+ */
+static asmlinkage void unsupported_syscall(struct pt_regs *regs,
+ enum exception_code code)
+{
+ struct task_struct *tsk = current;
+ siginfo_t info;
+
+ /* catch a kernel BUG() */
+ if (code == EXCEP_SYSCALL15 && !user_mode(regs)) {
+ if (report_bug(regs->pc, regs) == BUG_TRAP_TYPE_BUG) {
+#ifdef CONFIG_GDBSTUB
+ __gdbstub_bug_trap();
+#endif
+ }
+ }
+
+ regs->pc -= 2; /* syscall return addr is _after_ the instruction */
+
+ die_if_no_fixup("An unsupported syscall insn was used by the kernel\n",
+ regs, code);
+
+ info.si_signo = SIGILL;
+ info.si_errno = ENOSYS;
+ info.si_code = ILL_ILLTRP;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGILL, &info, tsk);
+}
+
+/*
+ * display the register file when the stack pointer gets clobbered
+ */
+asmlinkage void do_double_fault(struct pt_regs *regs)
+{
+ struct task_struct *tsk = current;
+
+ strcpy(tsk->comm, "emergency tsk");
+ tsk->pid = 0;
+ console_verbose();
+ printk(KERN_EMERG "--- double fault ---\n");
+ show_registers(regs);
+}
+
+/*
+ * asynchronous bus error (external, usually I/O DMA)
+ */
+asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs)
+{
+ console_verbose();
+
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "Asynchronous I/O Bus Error\n"
+ KERN_EMERG "==========================\n");
+
+ if (bcberr & BCBERR_BEME)
+ printk(KERN_EMERG "- Multiple recorded errors\n");
+
+ printk(KERN_EMERG "- Faulting Buses:%s%s%s\n",
+ bcberr & BCBERR_BEMR_CI ? " CPU-Ins-Fetch" : "",
+ bcberr & BCBERR_BEMR_CD ? " CPU-Data" : "",
+ bcberr & BCBERR_BEMR_DMA ? " DMA" : "");
+
+ printk(KERN_EMERG "- %s %s access made to %s at address %08x\n",
+ bcberr & BCBERR_BEBST ? "Burst" : "Single",
+ bcberr & BCBERR_BERW ? "Read" : "Write",
+ bcberr & BCBERR_BESB_MON ? "Monitor Space" :
+ bcberr & BCBERR_BESB_IO ? "Internal CPU I/O Space" :
+ bcberr & BCBERR_BESB_EX ? "External I/O Bus" :
+ bcberr & BCBERR_BESB_OPEX ? "External Memory Bus" :
+ "On Chip Memory",
+ bcbear
+ );
+
+ printk(KERN_EMERG "- Detected by the %s\n",
+ bcberr&BCBERR_BESD ? "Bus Control Unit" : "Slave Bus");
+
+#ifdef CONFIG_PCI
+#define BRIDGEREGB(X) (*(volatile __u8 *)(0xBE040000 + (X)))
+#define BRIDGEREGW(X) (*(volatile __u16 *)(0xBE040000 + (X)))
+#define BRIDGEREGL(X) (*(volatile __u32 *)(0xBE040000 + (X)))
+
+ printk(KERN_EMERG "- PCI Memory Paging Reg: %08x\n",
+ *(volatile __u32 *) (0xBFFFFFF4));
+ printk(KERN_EMERG "- PCI Bridge Base Address 0: %08x\n",
+ BRIDGEREGL(PCI_BASE_ADDRESS_0));
+ printk(KERN_EMERG "- PCI Bridge AMPCI Base Address: %08x\n",
+ BRIDGEREGL(0x48));
+ printk(KERN_EMERG "- PCI Bridge Command: %04hx\n",
+ BRIDGEREGW(PCI_COMMAND));
+ printk(KERN_EMERG "- PCI Bridge Status: %04hx\n",
+ BRIDGEREGW(PCI_STATUS));
+ printk(KERN_EMERG "- PCI Bridge Int Status: %08hx\n",
+ BRIDGEREGL(0x4c));
+#endif
+
+ printk(KERN_EMERG "\n");
+ show_registers(regs);
+
+ panic("Halted due to asynchronous I/O Bus Error\n");
+}
+
+/*
+ * handle an exception for which a handler has not yet been installed
+ */
+asmlinkage void uninitialised_exception(struct pt_regs *regs,
+ enum exception_code code)
+{
+
+ /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_intercept(regs, code))
+ return;
+#endif
+
+ peripheral_leds_display_exception(code);
+ printk(KERN_EMERG "Uninitialised Exception 0x%04x\n", code & 0xFFFF);
+ show_registers(regs);
+
+ for (;;)
+ continue;
+}
+
+/*
+ * set an interrupt stub to jump to a handler
+ * ! NOTE: this does *not* flush the caches
+ */
+void __init __set_intr_stub(enum exception_code code, void *handler)
+{
+ unsigned long addr;
+ u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+ addr = (unsigned long) handler - (unsigned long) vector;
+ vector[0] = 0xdc; /* JMP handler */
+ vector[1] = addr;
+ vector[2] = addr >> 8;
+ vector[3] = addr >> 16;
+ vector[4] = addr >> 24;
+ vector[5] = 0xcb;
+ vector[6] = 0xcb;
+ vector[7] = 0xcb;
+}
+
+/*
+ * set an interrupt stub to jump to a handler
+ */
+void __init set_intr_stub(enum exception_code code, void *handler)
+{
+ unsigned long addr;
+ u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+ addr = (unsigned long) handler - (unsigned long) vector;
+ vector[0] = 0xdc; /* JMP handler */
+ vector[1] = addr;
+ vector[2] = addr >> 8;
+ vector[3] = addr >> 16;
+ vector[4] = addr >> 24;
+ vector[5] = 0xcb;
+ vector[6] = 0xcb;
+ vector[7] = 0xcb;
+
+ mn10300_dcache_flush_inv();
+ mn10300_icache_inv();
+}
+
+/*
+ * set an interrupt stub to invoke the JTAG unit and then jump to a handler
+ */
+void __init set_jtag_stub(enum exception_code code, void *handler)
+{
+ unsigned long addr;
+ u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+ addr = (unsigned long) handler - ((unsigned long) vector + 1);
+ vector[0] = 0xff; /* PI to jump into JTAG debugger */
+ vector[1] = 0xdc; /* jmp handler */
+ vector[2] = addr;
+ vector[3] = addr >> 8;
+ vector[4] = addr >> 16;
+ vector[5] = addr >> 24;
+ vector[6] = 0xcb;
+ vector[7] = 0xcb;
+
+ mn10300_dcache_flush_inv();
+ flush_icache_range((unsigned long) vector, (unsigned long) vector + 8);
+}
+
+/*
+ * initialise the exception table
+ */
+void __init trap_init(void)
+{
+ set_excp_vector(EXCEP_TRAP, trap);
+ set_excp_vector(EXCEP_ISTEP, istep);
+ set_excp_vector(EXCEP_IBREAK, ibreak);
+ set_excp_vector(EXCEP_OBREAK, obreak);
+
+ set_excp_vector(EXCEP_PRIVINS, priv_op);
+ set_excp_vector(EXCEP_UNIMPINS, invalid_op);
+ set_excp_vector(EXCEP_UNIMPEXINS, invalid_exop);
+ set_excp_vector(EXCEP_MEMERR, mem_error);
+ set_excp_vector(EXCEP_MISALIGN, misalignment);
+ set_excp_vector(EXCEP_BUSERROR, bus_error);
+ set_excp_vector(EXCEP_ILLINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_ILLDATACC, data_acc_error);
+ set_excp_vector(EXCEP_IOINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_PRIVINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_PRIVDATACC, data_acc_error);
+ set_excp_vector(EXCEP_DATINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_FPU_DISABLED, fpu_disabled);
+ set_excp_vector(EXCEP_FPU_UNIMPINS, fpu_invalid_op);
+ set_excp_vector(EXCEP_FPU_OPERATION, fpu_exception);
+
+ set_excp_vector(EXCEP_NMI, nmi);
+
+ set_excp_vector(EXCEP_SYSCALL1, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL2, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL3, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL4, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL5, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL6, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL7, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL8, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL9, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL10, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL11, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL12, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL13, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL14, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL15, unsupported_syscall);
+}
+
+/*
+ * determine if a program counter value is a valid bug address
+ */
+int is_valid_bugaddr(unsigned long pc)
+{
+ return pc >= PAGE_OFFSET;
+}
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..a3e80f4
--- /dev/null
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -0,0 +1,159 @@
+/* MN10300 Main kernel linker script
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#define __VMLINUX_LDS__
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+
+OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin")
+OUTPUT_ARCH(mn10300)
+ENTRY(_start)
+jiffies = jiffies_64;
+#ifndef CONFIG_MN10300_CURRENT_IN_E2
+current = __current;
+#endif
+SECTIONS
+{
+ . = CONFIG_KERNEL_TEXT_ADDRESS;
+ /* read-only */
+ _stext = .;
+ _text = .; /* Text and read-only data */
+ .text : {
+ *(
+ .text.head
+ .text
+ )
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ } = 0xcb
+
+ _etext = .; /* End of text section */
+
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ BUG_TABLE
+
+ RODATA
+
+ /* writeable */
+ .data : { /* Data */
+ DATA_DATA
+ CONSTRUCTORS
+ }
+
+ . = ALIGN(4096);
+ __nosave_begin = .;
+ .data_nosave : { *(.data.nosave) }
+ . = ALIGN(4096);
+ __nosave_end = .;
+
+ . = ALIGN(4096);
+ .data.page_aligned : { *(.data.idt) }
+
+ . = ALIGN(32);
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+ /* rarely changed data like cpu maps */
+ . = ALIGN(32);
+ .data.read_mostly : AT(ADDR(.data.read_mostly)) {
+ *(.data.read_mostly)
+ _edata = .; /* End of data section */
+ }
+
+ . = ALIGN(THREAD_SIZE); /* init_task */
+ .data.init_task : { *(.data.init_task) }
+
+ /* might get freed after init */
+ . = ALIGN(4096);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ }
+
+ /* will be freed after init */
+ . = ALIGN(4096); /* Init code and data */
+ __init_begin = .;
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+ .init.data : { *(.init.data) }
+ . = ALIGN(16);
+ __setup_start = .;
+ .setup.init : { KEEP(*(.init.setup)) }
+ __setup_end = .;
+
+ __initcall_start = .;
+ .initcall.init : {
+ INITCALLS
+ }
+ __initcall_end = .;
+ __con_initcall_start = .;
+ .con_initcall.init : { *(.con_initcall.init) }
+ __con_initcall_end = .;
+
+ SECURITY_INIT
+ . = ALIGN(4);
+ __alt_instructions = .;
+ .altinstructions : { *(.altinstructions) }
+ __alt_instructions_end = .;
+ .altinstr_replacement : { *(.altinstr_replacement) }
+ /* .exit.text is discard at runtime, not link time, to deal with references
+ from .altinstructions and .eh_frame */
+ .exit.text : { *(.exit.text) }
+ .exit.data : { *(.exit.data) }
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(4096);
+ __initramfs_start = .;
+ .init.ramfs : { *(.init.ramfs) }
+ __initramfs_end = .;
+#endif
+
+ . = ALIGN(32);
+ __per_cpu_start = .;
+ .data.percpu : { *(.data.percpu) }
+ __per_cpu_end = .;
+ . = ALIGN(4096);
+ __init_end = .;
+ /* freed after init ends here */
+
+ __bss_start = .; /* BSS */
+ .bss : {
+ *(.bss.page_aligned)
+ *(.bss)
+ }
+ . = ALIGN(4);
+ __bss_stop = .;
+
+ _end = . ;
+
+ /* This is where the kernel creates the early boot page tables */
+ . = ALIGN(4096);
+ pg0 = .;
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ }
+
+ STABS_DEBUG
+
+ DWARF_DEBUG
+}
diff --git a/arch/mn10300/lib/Makefile b/arch/mn10300/lib/Makefile
new file mode 100644
index 0000000..fdfa9ec
--- /dev/null
+++ b/arch/mn10300/lib/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the MN10300-specific library files..
+#
+
+lib-y = delay.o usercopy.o checksum.o bitops.o memcpy.o memmove.o memset.o
+lib-y += do_csum.o
+lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o
diff --git a/arch/mn10300/lib/__ashldi3.S b/arch/mn10300/lib/__ashldi3.S
new file mode 100644
index 0000000..a51a9506
--- /dev/null
+++ b/arch/mn10300/lib/__ashldi3.S
@@ -0,0 +1,51 @@
+/* MN10300 64-bit arithmetic left shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __ashldi3(unsigned long long value [D1:D0],
+# unsigned by [(12,SP)])
+#
+###############################################################################
+ .globl __ashldi3
+ .type __ashldi3,@function
+__ashldi3:
+ mov (12,sp),a0
+ and +63,a0
+ beq __ashldi3_zero
+
+ cmp +31,a0
+ bhi __ashldi3_32plus
+
+ # the count is in the range 1-31
+ asl a0,d1
+
+ mov +32,a1
+ sub a0,a1,a1 # a1 = 32 - count
+ lsr a1,d0,a1 # get overflow from LSW -> MSW
+
+ or_asl a1,d1,a0,d0 # insert overflow into MSW and
+ # shift the LSW
+ rets
+
+ .balign L1_CACHE_BYTES
+ # the count is in the range 32-63
+__ashldi3_32plus:
+ asl a0,d0,d1
+ clr d0
+__ashldi3_zero:
+ rets
+
+ .size __ashldi3, .-__ashldi3
diff --git a/arch/mn10300/lib/__ashrdi3.S b/arch/mn10300/lib/__ashrdi3.S
new file mode 100644
index 0000000..6f42382
--- /dev/null
+++ b/arch/mn10300/lib/__ashrdi3.S
@@ -0,0 +1,52 @@
+/* MN10300 64-bit arithmetic right shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __ashrdi3(unsigned long long value [D1:D0],
+# unsigned by [(12,SP)])
+#
+###############################################################################
+ .globl __ashrdi3
+ .type __ashrdi3,@function
+__ashrdi3:
+ mov (12,sp),a0
+ and +63,a0
+ beq __ashrdi3_zero
+
+ cmp +31,a0
+ bhi __ashrdi3_32plus
+
+ # the count is in the range 1-31
+ lsr a0,d0
+
+ mov +32,a1
+ sub a0,a1,a1 # a1 = 32 - count
+ asl a1,d1,a1 # get underflow from MSW -> LSW
+
+ or_asr a1,d0,a0,d1 # insert underflow into LSW and
+ # shift the MSW
+ rets
+
+ .balign L1_CACHE_BYTES
+ # the count is in the range 32-63
+__ashrdi3_32plus:
+ asr a0,d1,d0
+ ext d0 # sign-extend result through MDR
+ mov mdr,d1
+__ashrdi3_zero:
+ rets
+
+ .size __ashrdi3, .-__ashrdi3
diff --git a/arch/mn10300/lib/__lshrdi3.S b/arch/mn10300/lib/__lshrdi3.S
new file mode 100644
index 0000000..a686aef
--- /dev/null
+++ b/arch/mn10300/lib/__lshrdi3.S
@@ -0,0 +1,52 @@
+/* MN10300 64-bit logical right shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <asm/cache.h>
+
+ .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __lshrdi3(unsigned long long value [D1:D0],
+# unsigned by [(12,SP)])
+#
+###############################################################################
+ .globl __lshrdi3
+ .type __lshrdi3,@function
+__lshrdi3:
+ mov (12,sp),a0
+ and +63,a0
+ beq __lshrdi3_zero
+
+ cmp +31,a0
+ bhi __lshrdi3_32plus
+
+ # the count is in the range 1-31
+ lsr a0,d0
+
+ mov +32,a1
+ sub a0,a1,a1 # a1 = 32 - count
+ asl a1,d1,a1 # get underflow from MSW -> LSW
+
+ or_lsr a1,d0,a0,d1 # insert underflow into LSW and
+ # shift the MSW
+ rets
+
+ .balign L1_CACHE_BYTES
+ # the count is in the range 32-63
+__lshrdi3_32plus:
+ lsr a0,d1,d0
+ clr d1
+__lshrdi3_zero:
+ rets
+
+ .size __lshrdi3, .-__lshrdi3
diff --git a/arch/mn10300/lib/ashrdi3.c b/arch/mn10300/lib/ashrdi3.c
new file mode 100644
index 0000000..c54f61d
--- /dev/null
+++ b/arch/mn10300/lib/ashrdi3.c
@@ -0,0 +1,61 @@
+/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__((mode(SI)));
+typedef unsigned int USItype __attribute__((mode(SI)));
+typedef int DItype __attribute__((mode(DI)));
+typedef int word_type __attribute__((mode(__word__)));
+
+struct DIstruct {
+ SItype low;
+ SItype high;
+};
+
+union DIunion {
+ struct DIstruct s;
+ DItype ll;
+};
+
+DItype __ashrdi3(DItype u, word_type b)
+{
+ union DIunion w;
+ union DIunion uu;
+ word_type bm;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ /* w.s.high = 1..1 or 0..0 */
+ w.s.high = uu.s.high >> (sizeof(SItype) * BITS_PER_UNIT - 1);
+ w.s.low = uu.s.high >> -bm;
+ } else {
+ USItype carries = (USItype)uu.s.high << bm;
+ w.s.high = uu.s.high >> b;
+ w.s.low = ((USItype)uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/mn10300/lib/bitops.c b/arch/mn10300/lib/bitops.c
new file mode 100644
index 0000000..440a7dc
--- /dev/null
+++ b/arch/mn10300/lib/bitops.c
@@ -0,0 +1,51 @@
+/* MN10300 Non-trivial bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+
+/*
+ * try flipping a bit using BSET and BCLR
+ */
+void change_bit(int nr, volatile void *addr)
+{
+ if (test_bit(nr, addr))
+ goto try_clear_bit;
+
+try_set_bit:
+ if (!test_and_set_bit(nr, addr))
+ return;
+
+try_clear_bit:
+ if (test_and_clear_bit(nr, addr))
+ return;
+
+ goto try_set_bit;
+}
+
+/*
+ * try flipping a bit using BSET and BCLR and returning the old value
+ */
+int test_and_change_bit(int nr, volatile void *addr)
+{
+ if (test_bit(nr, addr))
+ goto try_clear_bit;
+
+try_set_bit:
+ if (!test_and_set_bit(nr, addr))
+ return 0;
+
+try_clear_bit:
+ if (test_and_clear_bit(nr, addr))
+ return 1;
+
+ goto try_set_bit;
+}
diff --git a/arch/mn10300/lib/checksum.c b/arch/mn10300/lib/checksum.c
new file mode 100644
index 0000000..274f29e
--- /dev/null
+++ b/arch/mn10300/lib/checksum.c
@@ -0,0 +1,99 @@
+/* MN10300 Optimised checksumming wrappers
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+#include "internal.h"
+
+static inline unsigned short from32to16(__wsum sum)
+{
+ asm(" add %1,%0 \n"
+ " addc 0xffff,%0 \n"
+ : "=r" (sum)
+ : "r" (sum << 16), "0" (sum & 0xffff0000)
+ );
+ return sum >> 16;
+}
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ return ~do_csum(iph, ihl * 4);
+}
+EXPORT_SYMBOL(ip_fast_csum);
+
+__wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+ __wsum result;
+
+ result = do_csum(buff, len);
+ result += sum;
+ if (sum > result)
+ result++;
+ return result;
+}
+EXPORT_SYMBOL(csum_partial);
+
+__sum16 ip_compute_csum(const void *buff, int len)
+{
+ return ~from32to16(do_csum(buff, len));
+}
+EXPORT_SYMBOL(ip_compute_csum);
+
+__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
+{
+ copy_from_user(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy);
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum)
+{
+ sum = csum_partial(src, len, sum);
+ memcpy(dst, src, len);
+ return sum;
+}
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+
+__wsum csum_partial_copy_from_user(const void *src, void *dst,
+ int len, __wsum sum,
+ int *err_ptr)
+{
+ int missing;
+
+ missing = copy_from_user(dst, src, len);
+ if (missing) {
+ memset(dst + len - missing, 0, missing);
+ *err_ptr = -EFAULT;
+ }
+
+ return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
+__wsum csum_and_copy_to_user(const void *src, void *dst,
+ int len, __wsum sum,
+ int *err_ptr)
+{
+ int missing;
+
+ missing = copy_to_user(dst, src, len);
+ if (missing) {
+ memset(dst + len - missing, 0, missing);
+ *err_ptr = -EFAULT;
+ }
+
+ return csum_partial(src, len, sum);
+}
+EXPORT_SYMBOL(csum_and_copy_to_user);
diff --git a/arch/mn10300/lib/delay.c b/arch/mn10300/lib/delay.c
new file mode 100644
index 0000000..cce66bc
--- /dev/null
+++ b/arch/mn10300/lib/delay.c
@@ -0,0 +1,50 @@
+/* MN10300 Short delay interpolation routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+
+/*
+ * basic delay loop
+ */
+void __delay(unsigned long loops)
+{
+ int d0;
+
+ asm volatile(
+ " bra 1f \n"
+ " .align 4 \n"
+ "1: bra 2f \n"
+ " .align 4 \n"
+ "2: add -1,%0 \n"
+ " bne 2b \n"
+ : "=&d" (d0)
+ : "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * handle a delay specified in terms of microseconds
+ */
+void __udelay(unsigned long usecs)
+{
+ signed long ioclk, stop;
+
+ /* usecs * CLK / 1E6 */
+ stop = __muldiv64u(usecs, MN10300_TSCCLK, 1000000);
+ stop = TMTSCBC - stop;
+
+ do {
+ ioclk = TMTSCBC;
+ } while (stop < ioclk);
+}
+EXPORT_SYMBOL(__udelay);
diff --git a/arch/mn10300/lib/do_csum.S b/arch/mn10300/lib/do_csum.S
new file mode 100644
index 0000000..e138994
--- /dev/null
+++ b/arch/mn10300/lib/do_csum.S
@@ -0,0 +1,162 @@
+/* Optimised simple memory checksum
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned int do_csum(const unsigned char *buff, size_t len)
+#
+###############################################################################
+ .globl do_csum
+ .type do_csum,@function
+do_csum:
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov d1,d2 # count
+ mov d0,a0 # buff
+ clr d1 # accumulator
+
+ cmp +0,d2
+ beq do_csum_done # return if zero-length buffer
+
+ # 4-byte align the buffer pointer
+ btst +3,a0
+ beq do_csum_now_4b_aligned
+
+ btst +1,a0
+ beq do_csum_addr_not_odd
+ movbu (a0),d0
+ inc a0
+ asl +8,d0
+ add d0,d1
+ addc +0,d1
+ add -1,d2
+do_csum_addr_not_odd:
+
+ cmp +2,d2
+ bcs do_csum_fewer_than_4
+ btst +2,a0
+ beq do_csum_now_4b_aligned
+ movhu (a0+),d0
+ add d0,d1
+ addc +0,d1
+ add -2,d2
+ cmp +4,d2
+ bcs do_csum_fewer_than_4
+
+do_csum_now_4b_aligned:
+ # we want to checksum as much as we can in chunks of 32 bytes
+ cmp +31,d2
+ bls do_csum_remainder # 4-byte aligned remainder
+
+ add -32,d2
+ mov +32,d3
+
+do_csum_loop:
+ mov (a0+),d0
+ add d0,d1
+ mov (a0+),e0
+ addc e0,d1
+ mov (a0+),e1
+ addc e1,d1
+ mov (a0+),e3
+ addc e3,d1
+ mov (a0+),d0
+ addc d0,d1
+ mov (a0+),e0
+ addc e0,d1
+ mov (a0+),e1
+ addc e1,d1
+ mov (a0+),e3
+ addc e3,d1
+ addc +0,d1
+
+ sub d3,d2
+ bcc do_csum_loop
+
+ add d3,d2
+ beq do_csum_done
+
+do_csum_remainder:
+ # cut 16-31 bytes down to 0-15
+ cmp +16,d2
+ bcs do_csum_fewer_than_16
+ mov (a0+),d0
+ add d0,d1
+ mov (a0+),e0
+ addc e0,d1
+ mov (a0+),e1
+ addc e1,d1
+ mov (a0+),e3
+ addc e3,d1
+ addc +0,d1
+ add -16,d2
+ beq do_csum_done
+
+do_csum_fewer_than_16:
+ # copy the remaining whole words
+ cmp +4,d2
+ bcs do_csum_fewer_than_4
+ cmp +8,d2
+ bcs do_csum_one_word
+ cmp +12,d2
+ bcs do_csum_two_words
+ mov (a0+),d0
+ add d0,d1
+ addc +0,d1
+do_csum_two_words:
+ mov (a0+),d0
+ add d0,d1
+ addc +0,d1
+do_csum_one_word:
+ mov (a0+),d0
+ add d0,d1
+ addc +0,d1
+
+do_csum_fewer_than_4:
+ and +3,d2
+ beq do_csum_done
+ xor_cmp d0,d0,+2,d2
+ bcs do_csum_fewer_than_2
+ movhu (a0+),d0
+do_csum_fewer_than_2:
+ and +1,d2
+ beq do_csum_add_last_bit
+ movbu (a0),d3
+ add d3,d0
+do_csum_add_last_bit:
+ add d0,d1
+ addc +0,d1
+
+do_csum_done:
+ # compress the checksum down to 16 bits
+ mov +0xffff0000,d2
+ and d1,d2
+ asl +16,d1
+ add d2,d1,d0
+ addc +0xffff,d0
+ lsr +16,d0
+
+ # flip the halves of the word result if the buffer was oddly aligned
+ mov (12,sp),d1
+ and +1,d1
+ beq do_csum_not_oddly_aligned
+ swaph d0,d0 # exchange bits 15:8 with 7:0
+
+do_csum_not_oddly_aligned:
+ ret [d2,d3],8
+
+do_csum_end:
+ .size do_csum, do_csum_end-do_csum
diff --git a/arch/mn10300/lib/internal.h b/arch/mn10300/lib/internal.h
new file mode 100644
index 0000000..0014eee
--- /dev/null
+++ b/arch/mn10300/lib/internal.h
@@ -0,0 +1,15 @@
+/* Internal definitions for the arch part of the kernel library
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * do_csum.S
+ */
+extern unsigned int do_csum(const unsigned char *, size_t);
diff --git a/arch/mn10300/lib/lshrdi3.c b/arch/mn10300/lib/lshrdi3.c
new file mode 100644
index 0000000..e05e64e
--- /dev/null
+++ b/arch/mn10300/lib/lshrdi3.c
@@ -0,0 +1,60 @@
+/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__((mode(SI)));
+typedef unsigned int USItype __attribute__((mode(SI)));
+typedef int DItype __attribute__((mode(DI)));
+typedef int word_type __attribute__((mode(__word__)));
+
+struct DIstruct {
+ SItype low;
+ SItype high;
+};
+
+union DIunion {
+ struct DIstruct s;
+ DItype ll;
+};
+
+DItype __lshrdi3(DItype u, word_type b)
+{
+ union DIunion w;
+ word_type bm;
+ union DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ w.s.high = 0;
+ w.s.low = (USItype) uu.s.high >> -bm;
+ } else {
+ USItype carries = (USItype) uu.s.high << bm;
+ w.s.high = (USItype) uu.s.high >> b;
+ w.s.low = ((USItype) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/mn10300/lib/memcpy.S b/arch/mn10300/lib/memcpy.S
new file mode 100644
index 0000000..25fb9bb
--- /dev/null
+++ b/arch/mn10300/lib/memcpy.S
@@ -0,0 +1,135 @@
+/* MN10300 Optimised simple memory to memory copy
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memcpy(void *dst, const void *src, size_t n)
+#
+###############################################################################
+ .globl memcpy
+ .type memcpy,@function
+memcpy:
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov (20,sp),d2 # count
+ mov d0,a0 # dst
+ mov d1,a1 # src
+ mov d0,e3 # the return value
+
+ cmp +0,d2
+ beq memcpy_done # return if zero-length copy
+
+ # see if the three parameters are all four-byte aligned
+ or d0,d1,d3
+ or d2,d3
+ and +3,d3
+ bne memcpy_1 # jump if not
+
+ # we want to transfer as much as we can in chunks of 32 bytes
+ cmp +31,d2
+ bls memcpy_4_remainder # 4-byte aligned remainder
+
+ movm [exreg1],(sp)
+ add -32,d2
+ mov +32,d3
+
+memcpy_4_loop:
+ mov (a1+),d0
+ mov (a1+),d1
+ mov (a1+),e0
+ mov (a1+),e1
+ mov (a1+),e4
+ mov (a1+),e5
+ mov (a1+),e6
+ mov (a1+),e7
+ mov d0,(a0+)
+ mov d1,(a0+)
+ mov e0,(a0+)
+ mov e1,(a0+)
+ mov e4,(a0+)
+ mov e5,(a0+)
+ mov e6,(a0+)
+ mov e7,(a0+)
+
+ sub d3,d2
+ bcc memcpy_4_loop
+
+ movm (sp),[exreg1]
+ add d3,d2
+ beq memcpy_4_no_remainder
+
+memcpy_4_remainder:
+ # cut 4-7 words down to 0-3
+ cmp +16,d2
+ bcs memcpy_4_three_or_fewer_words
+ mov (a1+),d0
+ mov (a1+),d1
+ mov (a1+),e0
+ mov (a1+),e1
+ mov d0,(a0+)
+ mov d1,(a0+)
+ mov e0,(a0+)
+ mov e1,(a0+)
+ add -16,d2
+ beq memcpy_4_no_remainder
+
+ # copy the remaining 1, 2 or 3 words
+memcpy_4_three_or_fewer_words:
+ cmp +8,d2
+ bcs memcpy_4_one_word
+ beq memcpy_4_two_words
+ mov (a1+),d0
+ mov d0,(a0+)
+memcpy_4_two_words:
+ mov (a1+),d0
+ mov d0,(a0+)
+memcpy_4_one_word:
+ mov (a1+),d0
+ mov d0,(a0+)
+
+memcpy_4_no_remainder:
+ # check we copied the correct amount
+ # TODO: REMOVE CHECK
+ sub e3,a0,d2
+ mov (20,sp),d1
+ cmp d2,d1
+ beq memcpy_done
+ break
+ break
+ break
+
+memcpy_done:
+ mov e3,a0
+ ret [d2,d3],8
+
+ # handle misaligned copying
+memcpy_1:
+ add -1,d2
+ mov +1,d3
+ setlb # setlb requires the next insns
+ # to occupy exactly 4 bytes
+
+ sub d3,d2
+ movbu (a1),d0
+ movbu d0,(a0)
+ add_add d3,a1,d3,a0
+ lcc
+
+ mov e3,a0
+ ret [d2,d3],8
+
+memcpy_end:
+ .size memcpy, memcpy_end-memcpy
diff --git a/arch/mn10300/lib/memmove.S b/arch/mn10300/lib/memmove.S
new file mode 100644
index 0000000..20b07b6
--- /dev/null
+++ b/arch/mn10300/lib/memmove.S
@@ -0,0 +1,160 @@
+/* MN10300 Optimised simple memory to memory copy, with support for overlapping
+ * regions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memmove(void *dst, const void *src, size_t n)
+#
+###############################################################################
+ .globl memmove
+ .type memmove,@function
+memmove:
+ # fall back to memcpy if dst < src to work bottom up
+ cmp d1,d0
+ bcs memmove_memcpy
+
+ # work top down
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov (20,sp),d2 # count
+ add d0,d2,a0 # dst end
+ add d1,d2,a1 # src end
+ mov d0,e3 # the return value
+
+ cmp +0,d2
+ beq memmove_done # return if zero-length copy
+
+ # see if the three parameters are all four-byte aligned
+ or d0,d1,d3
+ or d2,d3
+ and +3,d3
+ bne memmove_1 # jump if not
+
+ # we want to transfer as much as we can in chunks of 32 bytes
+ add -4,a1
+ cmp +31,d2
+ bls memmove_4_remainder # 4-byte aligned remainder
+
+ add -32,d2
+ mov +32,d3
+
+memmove_4_loop:
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ sub d3,d2
+ bcc memmove_4_loop
+
+ add d3,d2
+ beq memmove_4_no_remainder
+
+memmove_4_remainder:
+ # cut 4-7 words down to 0-3
+ cmp +16,d2
+ bcs memmove_4_three_or_fewer_words
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+ mov (a1),e0
+ sub_sub +4,a1,+4,a0
+ mov e0,(a0)
+ mov (a1),e1
+ sub_sub +4,a1,+4,a0
+ mov e1,(a0)
+ add -16,d2
+ beq memmove_4_no_remainder
+
+ # copy the remaining 1, 2 or 3 words
+memmove_4_three_or_fewer_words:
+ cmp +8,d2
+ bcs memmove_4_one_word
+ beq memmove_4_two_words
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+memmove_4_two_words:
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+memmove_4_one_word:
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+
+memmove_4_no_remainder:
+ # check we copied the correct amount
+ # TODO: REMOVE CHECK
+ sub e3,a0,d2
+ beq memmove_done
+ break
+ break
+ break
+
+memmove_done:
+ mov e3,a0
+ ret [d2,d3],8
+
+ # handle misaligned copying
+memmove_1:
+ add -1,a1
+ add -1,d2
+ mov +1,d3
+ setlb # setlb requires the next insns
+ # to occupy exactly 4 bytes
+
+ sub d3,d2
+ movbu (a1),d0
+ sub_sub d3,a1,d3,a0
+ movbu d0,(a0)
+ lcc
+
+ mov e3,a0
+ ret [d2,d3],8
+
+memmove_memcpy:
+ jmp memcpy
+
+memmove_end:
+ .size memmove, memmove_end-memmove
diff --git a/arch/mn10300/lib/memset.S b/arch/mn10300/lib/memset.S
new file mode 100644
index 0000000..bc02e39
--- /dev/null
+++ b/arch/mn10300/lib/memset.S
@@ -0,0 +1,121 @@
+/* Optimised simple memory fill
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memset(void *dst, int c, size_t n)
+#
+###############################################################################
+ .globl memset
+ .type memset,@function
+memset:
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov (20,sp),d2 # count
+ mov d0,a0 # dst
+ mov d0,e3 # the return value
+
+ cmp +0,d2
+ beq memset_done # return if zero-length fill
+
+ # see if the region parameters are four-byte aligned
+ or d0,d2,d3
+ and +3,d3
+ bne memset_1 # jump if not
+
+ extbu d1
+ mov_asl d1,d3,8,d1
+ or_asl d1,d3,8,d1
+ or_asl d1,d3,8,d1
+ or d3,d1
+
+ # we want to transfer as much as we can in chunks of 32 bytes
+ cmp +31,d2
+ bls memset_4_remainder # 4-byte aligned remainder
+
+ add -32,d2
+ mov +32,d3
+
+memset_4_loop:
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+
+ sub d3,d2
+ bcc memset_4_loop
+
+ add d3,d2
+ beq memset_4_no_remainder
+
+memset_4_remainder:
+ # cut 4-7 words down to 0-3
+ cmp +16,d2
+ bcs memset_4_three_or_fewer_words
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ add -16,d2
+ beq memset_4_no_remainder
+
+ # copy the remaining 1, 2 or 3 words
+memset_4_three_or_fewer_words:
+ cmp +8,d2
+ bcs memset_4_one_word
+ beq memset_4_two_words
+ mov d1,(a0+)
+memset_4_two_words:
+ mov d1,(a0+)
+memset_4_one_word:
+ mov d1,(a0+)
+
+memset_4_no_remainder:
+ # check we set the correct amount
+ # TODO: REMOVE CHECK
+ sub e3,a0,d2
+ mov (20,sp),d1
+ cmp d2,d1
+ beq memset_done
+ break
+ break
+ break
+
+memset_done:
+ mov e3,a0
+ ret [d2,d3],8
+
+ # handle misaligned copying
+memset_1:
+ add -1,d2
+ mov +1,d3
+ setlb # setlb requires the next insns
+ # to occupy exactly 4 bytes
+
+ sub d3,d2
+ movbu d1,(a0)
+ inc a0
+ lcc
+
+ mov e3,a0
+ ret [d2,d3],8
+
+memset_end:
+ .size memset, memset_end-memset
diff --git a/arch/mn10300/lib/negdi2.c b/arch/mn10300/lib/negdi2.c
new file mode 100644
index 0000000..eae4ecd
--- /dev/null
+++ b/arch/mn10300/lib/negdi2.c
@@ -0,0 +1,57 @@
+/* More subroutines needed by GCC output code on some machines. */
+/* Compile this one with gcc. */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+In addition to the permissions in the GNU General Public Licence, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public Licence restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+/* It is incorrect to include config.h here, because this file is being
+ compiled for the target, and hence definitions concerning only the host
+ do not apply. */
+
+#include <linux/types.h>
+
+union DWunion {
+ s64 ll;
+ struct {
+ s32 low;
+ s32 high;
+ } s;
+};
+
+s64 __negdi2(s64 u)
+{
+ union DWunion w;
+ union DWunion uu;
+
+ uu.ll = u;
+
+ w.s.low = -uu.s.low;
+ w.s.high = -uu.s.high - ((u32) w.s.low > 0);
+
+ return w.ll;
+}
diff --git a/arch/mn10300/lib/usercopy.c b/arch/mn10300/lib/usercopy.c
new file mode 100644
index 0000000..a75b203
--- /dev/null
+++ b/arch/mn10300/lib/usercopy.c
@@ -0,0 +1,166 @@
+/* MN10300 Userspace accessor functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/uaccess.h>
+
+unsigned long
+__generic_copy_to_user(void *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __copy_user(to, from, n);
+ return n;
+}
+
+unsigned long
+__generic_copy_from_user(void *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_READ, from, n))
+ __copy_user_zeroing(to, from, n);
+ return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+#define __do_strncpy_from_user(dst, src, count, res) \
+do { \
+ int w; \
+ asm volatile( \
+ " mov %1,%0\n" \
+ " cmp 0,%1\n" \
+ " beq 2f\n" \
+ "0:\n" \
+ " movbu (%5),%2\n" \
+ "1:\n" \
+ " movbu %2,(%6)\n" \
+ " inc %5\n" \
+ " inc %6\n" \
+ " cmp 0,%2\n" \
+ " beq 2f\n" \
+ " add -1,%1\n" \
+ " bne 0b\n" \
+ "2:\n" \
+ " sub %1,%0\n" \
+ "3:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "4:\n" \
+ " mov %3,%0\n" \
+ " jmp 3b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,4b\n" \
+ " .long 1b,4b\n" \
+ " .previous" \
+ :"=&r"(res), "=r"(count), "=&r"(w) \
+ :"i"(-EFAULT), "1"(count), "a"(src), "a"(dst) \
+ :"memory"); \
+} while (0)
+
+long
+__strncpy_from_user(char *dst, const char *src, long count)
+{
+ long res;
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+ long res = -EFAULT;
+ if (access_ok(VERIFY_READ, src, 1))
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+
+/*
+ * Clear a userspace memory
+ */
+#define __do_clear_user(addr, size) \
+do { \
+ int w; \
+ asm volatile( \
+ " cmp 0,%0\n" \
+ " beq 1f\n" \
+ " clr %1\n" \
+ "0: movbu %1,(%3,%2)\n" \
+ " inc %3\n" \
+ " cmp %0,%3\n" \
+ " bne 0b\n" \
+ "1:\n" \
+ " sub %3,%0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ ".previous\n" \
+ : "+r"(size), "=&r"(w) \
+ : "a"(addr), "d"(0) \
+ : "memory"); \
+} while (0)
+
+unsigned long
+__clear_user(void *to, unsigned long n)
+{
+ __do_clear_user(to, n);
+ return n;
+}
+
+unsigned long
+clear_user(void *to, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __do_clear_user(to, n);
+ return n;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+long strnlen_user(const char *s, long n)
+{
+ unsigned long res, w;
+
+ if (!__addr_ok(s))
+ return 0;
+
+ if (n < 0 || n + (u_long) s > current_thread_info()->addr_limit.seg)
+ n = current_thread_info()->addr_limit.seg - (u_long)s;
+
+ asm volatile(
+ "0: cmp %4,%0\n"
+ " beq 2f\n"
+ "1: movbu (%0,%3),%1\n"
+ " inc %0\n"
+ " cmp 0,%1\n"
+ " beq 3f\n"
+ " bra 0b\n"
+ "2: clr %0\n"
+ "3:\n"
+ ".section .fixup,\"ax\"\n"
+ "4: jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .balign 4\n"
+ " .long 1b,4b\n"
+ ".previous\n"
+ :"=d"(res), "=&r"(w)
+ :"0"(0), "a"(s), "r"(n)
+ :"memory");
+ return res;
+}
diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile
new file mode 100644
index 0000000..28b9d98
--- /dev/null
+++ b/arch/mn10300/mm/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the MN10300-specific memory management code
+#
+
+obj-y := \
+ init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \
+ misalignment.o dma-alloc.o
+
+ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
+obj-y += cache.o cache-mn10300.o
+ifeq ($(CONFIG_MN10300_CACHE_WBACK),y)
+obj-y += cache-flush-mn10300.o
+endif
+endif
diff --git a/arch/mn10300/mm/cache-flush-mn10300.S b/arch/mn10300/mm/cache-flush-mn10300.S
new file mode 100644
index 0000000..c8ed1cb
--- /dev/null
+++ b/arch/mn10300/mm/cache-flush-mn10300.S
@@ -0,0 +1,192 @@
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+ .am33_2
+ .globl mn10300_dcache_flush
+ .globl mn10300_dcache_flush_page
+ .globl mn10300_dcache_flush_range
+ .globl mn10300_dcache_flush_range2
+ .globl mn10300_dcache_flush_inv
+ .globl mn10300_dcache_flush_inv_page
+ .globl mn10300_dcache_flush_inv_range
+ .globl mn10300_dcache_flush_inv_range2
+
+###############################################################################
+#
+# void mn10300_dcache_flush(void)
+# Flush the entire data cache back to RAM
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush:
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_flush_end
+
+ # read the addresses tagged in the cache's tag RAM and attempt to flush
+ # those addresses specifically
+ # - we rely on the hardware to filter out invalid tag entry addresses
+ mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_loop:
+ mov (a0),d0
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
+ # cache
+ mov d0,(a1) # conditional purge
+
+mn10300_dcache_flush_skip:
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_loop
+
+mn10300_dcache_flush_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_flush_page(unsigned start)
+# void mn10300_dcache_flush_range(unsigned start, unsigned end)
+# void mn10300_dcache_flush_range2(unsigned start, unsigned size)
+# Flush a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_flush_range2:
+ add d0,d1
+mn10300_dcache_flush_range:
+ movm [d2,d3],(sp)
+
+ movhu (CHCTR),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_flush_range_end
+
+ # round start addr down
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ # write a request to flush all instances of an address from the cache
+ mov DCACHE_PURGE(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache purge control
+ # reg address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+ or L1_CACHE_TAG_VALID,a1 # retain valid entries in the
+ # cache
+
+mn10300_dcache_flush_range_loop:
+ mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
+ # all ways
+
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
+ add -1,d1
+ bne mn10300_dcache_flush_range_loop
+
+mn10300_dcache_flush_range_end:
+ ret [d2,d3],8
+
+###############################################################################
+#
+# void mn10300_dcache_flush_inv(void)
+# Flush the entire data cache and invalidate all entries
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_inv:
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_flush_inv_end
+
+ # hit each line in the dcache with an unconditional purge
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_inv_loop:
+ mov (a1),d0 # unconditional purge
+
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_inv_loop
+
+mn10300_dcache_flush_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_flush_inv_page(unsigned start)
+# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size)
+# Flush and invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_inv_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_flush_inv_range2:
+ add d0,d1
+mn10300_dcache_flush_inv_range:
+ movm [d2,d3],(sp)
+ movhu (CHCTR),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_flush_inv_range_end
+
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
+ # addr down
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ # write a request to flush and invalidate all instances of an address
+ # from the cache
+ mov DCACHE_PURGE(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache purge control
+ # reg address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+mn10300_dcache_flush_inv_range_loop:
+ mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
+ # in all ways
+
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
+ add -1,d1
+ bne mn10300_dcache_flush_inv_range_loop
+
+mn10300_dcache_flush_inv_range_end:
+ ret [d2,d3],8
diff --git a/arch/mn10300/mm/cache-mn10300.S b/arch/mn10300/mm/cache-mn10300.S
new file mode 100644
index 0000000..e839d0a
--- /dev/null
+++ b/arch/mn10300/mm/cache-mn10300.S
@@ -0,0 +1,289 @@
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define mn10300_dcache_inv_range_intr_interval \
+ +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
+
+#if mn10300_dcache_inv_range_intr_interval > 0xff
+#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
+#endif
+
+ .am33_2
+
+ .globl mn10300_icache_inv
+ .globl mn10300_dcache_inv
+ .globl mn10300_dcache_inv_range
+ .globl mn10300_dcache_inv_range2
+ .globl mn10300_dcache_inv_page
+
+###############################################################################
+#
+# void mn10300_icache_inv(void)
+# Invalidate the entire icache
+#
+###############################################################################
+ ALIGN
+mn10300_icache_inv:
+ mov CHCTR,a0
+
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq mn10300_icache_inv_end
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the icache
+ and ~CHCTR_ICEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_ICINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # and reenable it
+ and ~CHCTR_ICINV,d0
+ or CHCTR_ICEN,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+ mov d1,epsw
+
+mn10300_icache_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv(void)
+# Invalidate the entire dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_inv:
+ mov CHCTR,a0
+
+ movhu (a0),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_inv_end
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the dcache
+ and ~CHCTR_DCEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_DCINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # and reenable it
+ and ~CHCTR_DCINV,d0
+ or CHCTR_DCEN,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+ mov d1,epsw
+
+mn10300_dcache_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_inv_range2(unsigned start, unsigned size)
+# void mn10300_dcache_inv_page(unsigned start)
+# Invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_inv_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_inv_range2:
+ add d0,d1
+mn10300_dcache_inv_range:
+ movm [d2,d3,a2],(sp)
+ mov CHCTR,a2
+
+ movhu (a2),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_inv_range_end
+
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
+ # addr down
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ clr d2 # we're going to clear tag ram
+ # entries
+
+ # read the tags from the tag RAM, and if they indicate a valid dirty
+ # cache line then invalidate that line
+ mov DCACHE_TAG(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache tag RAM
+ # access address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+ and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base
+
+mn10300_dcache_inv_range_outer_loop:
+ # disable interrupts
+ mov epsw,d3
+ and ~EPSW_IE,epsw
+ nop # note that reading CHCTR and
+ # AND'ing D0 occupy two delay
+ # slots after disabling
+ # interrupts
+
+ # disable the dcache
+ movhu (a2),d0
+ and ~CHCTR_DCEN,d0
+ movhu d0,(a2)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a2),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+mn10300_dcache_inv_range_loop:
+
+ # process the way 0 slot
+ mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_0:
+
+ # process the way 1 slot
+ mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_1:
+
+ # process the way 2 slot
+ mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_2:
+
+ # process the way 3 slot
+ mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_3:
+
+ # approx every N steps we re-enable the cache and see if there are any
+ # interrupts to be processed
+ # we also break out if we've reached the end of the loop
+ # (the bottom nibble of the count is zero in both cases)
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ btst mn10300_dcache_inv_range_intr_interval,d1
+ bne mn10300_dcache_inv_range_loop
+
+ # wait for the cache to finish what it's doing
+ setlb
+ movhu (a2),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # and reenable it
+ or CHCTR_DCEN,d0
+ movhu d0,(a2)
+ movhu (a2),d0
+
+ # re-enable interrupts
+ # - we don't bother with delay NOPs as we'll have enough instructions
+ # before we disable interrupts again to give the interrupts a chance
+ # to happen
+ mov d3,epsw
+
+ # go around again if the counter hasn't yet reached zero
+ add 0,d1
+ bne mn10300_dcache_inv_range_outer_loop
+
+mn10300_dcache_inv_range_end:
+ ret [d2,d3,a2],12
diff --git a/arch/mn10300/mm/cache.c b/arch/mn10300/mm/cache.c
new file mode 100644
index 0000000..1b76719
--- /dev/null
+++ b/arch/mn10300/mm/cache.c
@@ -0,0 +1,121 @@
+/* MN10300 Cache flushing routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+EXPORT_SYMBOL(mn10300_icache_inv);
+EXPORT_SYMBOL(mn10300_dcache_inv);
+EXPORT_SYMBOL(mn10300_dcache_inv_range);
+EXPORT_SYMBOL(mn10300_dcache_inv_range2);
+EXPORT_SYMBOL(mn10300_dcache_inv_page);
+
+#ifdef CONFIG_MN10300_CACHE_WBACK
+EXPORT_SYMBOL(mn10300_dcache_flush);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_range);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_range2);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_page);
+EXPORT_SYMBOL(mn10300_dcache_flush_range);
+EXPORT_SYMBOL(mn10300_dcache_flush_range2);
+EXPORT_SYMBOL(mn10300_dcache_flush_page);
+#endif
+
+/*
+ * write a page back from the dcache and invalidate the icache so that we can
+ * run code from it that we've just written into it
+ */
+void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+ mn10300_dcache_flush_page(page_to_phys(page));
+ mn10300_icache_inv();
+}
+EXPORT_SYMBOL(flush_icache_page);
+
+/*
+ * write some code we've just written back from the dcache and invalidate the
+ * icache so that we can run that code
+ */
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+#ifdef CONFIG_MN10300_CACHE_WBACK
+ unsigned long addr, size, off;
+ struct page *page;
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *ppte, pte;
+
+ for (; start < end; start += size) {
+ /* work out how much of the page to flush */
+ off = start & (PAGE_SIZE - 1);
+
+ size = end - start;
+ if (size > PAGE_SIZE - off)
+ size = PAGE_SIZE - off;
+
+ /* get the physical address the page is mapped to from the page
+ * tables */
+ pgd = pgd_offset(current->mm, start);
+ if (!pgd || !pgd_val(*pgd))
+ continue;
+
+ pud = pud_offset(pgd, start);
+ if (!pud || !pud_val(*pud))
+ continue;
+
+ pmd = pmd_offset(pud, start);
+ if (!pmd || !pmd_val(*pmd))
+ continue;
+
+ ppte = pte_offset_map(pmd, start);
+ if (!ppte)
+ continue;
+ pte = *ppte;
+ pte_unmap(ppte);
+
+ if (pte_none(pte))
+ continue;
+
+ page = pte_page(pte);
+ if (!page)
+ continue;
+
+ addr = page_to_phys(page);
+
+ /* flush the dcache and invalidate the icache coverage on that
+ * region */
+ mn10300_dcache_flush_range2(addr + off, size);
+ }
+#endif
+
+ mn10300_icache_inv();
+}
+EXPORT_SYMBOL(flush_icache_range);
+
+/*
+ * allow userspace to flush the instruction cache
+ */
+asmlinkage long sys_cacheflush(unsigned long start, unsigned long end)
+{
+ if (end < start)
+ return -EINVAL;
+
+ flush_icache_range(start, end);
+ return 0;
+}
diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c
new file mode 100644
index 0000000..f3649d8
--- /dev/null
+++ b/arch/mn10300/mm/dma-alloc.c
@@ -0,0 +1,56 @@
+/* MN10300 Dynamic DMA mapping support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-dma.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, int gfp)
+{
+ unsigned long addr;
+ void *ret;
+
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+ gfp |= GFP_DMA;
+
+ addr = __get_free_pages(gfp, get_order(size));
+ if (!addr)
+ return NULL;
+
+ /* map the coherent memory through the uncached memory window */
+ ret = (void *) (addr | 0x20000000);
+
+ /* fill the memory with obvious rubbish */
+ memset((void *) addr, 0xfb, size);
+
+ /* write back and evict all cache lines covering this region */
+ mn10300_dcache_flush_inv_range2(virt_to_phys((void *) addr), PAGE_SIZE);
+
+ *dma_handle = virt_to_bus((void *) addr);
+ return ret;
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+ unsigned long addr = (unsigned long) vaddr & ~0x20000000;
+
+ free_pages(addr, get_order(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
diff --git a/arch/mn10300/mm/extable.c b/arch/mn10300/mm/extable.c
new file mode 100644
index 0000000..25e5485
--- /dev/null
+++ b/arch/mn10300/mm/extable.c
@@ -0,0 +1,26 @@
+/* MN10300 In-kernel exception handling
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
new file mode 100644
index 0000000..78f092c
--- /dev/null
+++ b/arch/mn10300/mm/fault.c
@@ -0,0 +1,405 @@
+/* MN10300 MMU Fault handler
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/vt_kern.h> /* For unblank_screen() */
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/hardirq.h>
+#include <asm/gdb-stub.h>
+#include <asm/cpu-regs.h>
+
+/*
+ * Unlock any spinlocks which will prevent us from getting the
+ * message out
+ */
+void bust_spinlocks(int yes)
+{
+ if (yes) {
+ oops_in_progress = 1;
+#ifdef CONFIG_SMP
+ /* Many serial drivers do __global_cli() */
+ global_irq_lock = 0;
+#endif
+ } else {
+ int loglevel_save = console_loglevel;
+#ifdef CONFIG_VT
+ unblank_screen();
+#endif
+ oops_in_progress = 0;
+ /*
+ * OK, the message is on the console. Now we call printk()
+ * without oops_in_progress set so that printk will give klogd
+ * a poke. Hold onto your hats...
+ */
+ console_loglevel = 15; /* NMI oopser may have shut the console
+ * up */
+ printk(" ");
+ console_loglevel = loglevel_save;
+ }
+}
+
+void do_BUG(const char *file, int line)
+{
+ bust_spinlocks(1);
+ printk(KERN_EMERG "------------[ cut here ]------------\n");
+ printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
+}
+
+#if 0
+static void print_pagetable_entries(pgd_t *pgdir, unsigned long address)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ pgd = pgdir + __pgd_offset(address);
+ printk(KERN_DEBUG "pgd entry %p: %016Lx\n",
+ pgd, (long long) pgd_val(*pgd));
+
+ if (!pgd_present(*pgd)) {
+ printk(KERN_DEBUG "... pgd not present!\n");
+ return;
+ }
+ pmd = pmd_offset(pgd, address);
+ printk(KERN_DEBUG "pmd entry %p: %016Lx\n",
+ pmd, (long long)pmd_val(*pmd));
+
+ if (!pmd_present(*pmd)) {
+ printk(KERN_DEBUG "... pmd not present!\n");
+ return;
+ }
+ pte = pte_offset(pmd, address);
+ printk(KERN_DEBUG "pte entry %p: %016Lx\n",
+ pte, (long long) pte_val(*pte));
+
+ if (!pte_present(*pte))
+ printk(KERN_DEBUG "... pte not present!\n");
+}
+#endif
+
+asmlinkage void monitor_signal(struct pt_regs *);
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * fault_code:
+ * - LSW: either MMUFCR_IFC or MMUFCR_DFC as appropriate
+ * - MSW: 0 if data access, 1 if instruction access
+ * - bit 0: TLB miss flag
+ * - bit 1: initial write
+ * - bit 2: page invalid
+ * - bit 3: protection violation
+ * - bit 4: accessor (0=user 1=kernel)
+ * - bit 5: 0=read 1=write
+ * - bit 6-8: page protection spec
+ * - bit 9: illegal address
+ * - bit 16: 0=data 1=ins
+ *
+ */
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
+ unsigned long address)
+{
+ struct vm_area_struct *vma;
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ unsigned long page;
+ siginfo_t info;
+ int write, fault;
+
+#ifdef CONFIG_GDBSTUB
+ /* handle GDB stub causing a fault */
+ if (gdbstub_busy) {
+ gdbstub_exception(regs, TBR & TBR_INT_CODE);
+ return;
+ }
+#endif
+
+#if 0
+ printk(KERN_DEBUG "--- do_page_fault(%p,%s:%04lx,%08lx)\n",
+ regs,
+ fault_code & 0x10000 ? "ins" : "data",
+ fault_code & 0xffff, address);
+#endif
+
+ tsk = current;
+
+ /*
+ * We fault-in kernel-space virtual memory on-demand. The
+ * 'reference' page table is init_mm.pgd.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may
+ * be in an interrupt or a critical region, and should
+ * only copy the information from the master page table,
+ * nothing more.
+ *
+ * This verifies that the fault happens in kernel space
+ * and that the fault was a page not present (invalid) error
+ */
+ if (address >= VMALLOC_START && address < VMALLOC_END &&
+ (fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR &&
+ (fault_code & MMUFCR_xFC_PGINVAL) == MMUFCR_xFC_PGINVAL
+ )
+ goto vmalloc_fault;
+
+ mm = tsk->mm;
+ info.si_code = SEGV_MAPERR;
+
+ /*
+ * If we're in an interrupt or have no user
+ * context, we must not take the fault..
+ */
+ if (in_interrupt() || !mm)
+ goto no_context;
+
+ down_read(&mm->mmap_sem);
+
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+ if (vma->vm_start <= address)
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
+ /* accessing the stack below the stack pointer is always a
+ * bug */
+ if ((address & PAGE_MASK) + 2 * PAGE_SIZE < regs->sp) {
+#if 0
+ printk(KERN_WARNING
+ "[%d] ### Access below stack @%lx (sp=%lx)\n",
+ current->pid, address, regs->sp);
+ printk(KERN_WARNING
+ "vma [%08x - %08x]\n",
+ vma->vm_start, vma->vm_end);
+ show_registers(regs);
+ printk(KERN_WARNING
+ "[%d] ### Code: [%08lx]"
+ " %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ current->pid,
+ regs->pc,
+ ((u8 *) regs->pc)[0],
+ ((u8 *) regs->pc)[1],
+ ((u8 *) regs->pc)[2],
+ ((u8 *) regs->pc)[3],
+ ((u8 *) regs->pc)[4],
+ ((u8 *) regs->pc)[5],
+ ((u8 *) regs->pc)[6],
+ ((u8 *) regs->pc)[7]
+ );
+#endif
+ goto bad_area;
+ }
+ }
+
+ if (expand_stack(vma, address))
+ goto bad_area;
+
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+ info.si_code = SEGV_ACCERR;
+ write = 0;
+ switch (fault_code & (MMUFCR_xFC_PGINVAL|MMUFCR_xFC_TYPE)) {
+ default: /* 3: write, present */
+ case MMUFCR_xFC_TYPE_WRITE:
+#ifdef TEST_VERIFY_AREA
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
+ printk(KERN_DEBUG "WP fault at %08lx\n", regs->pc);
+#endif
+ /* write to absent page */
+ case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_WRITE:
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ write++;
+ break;
+
+ /* read from protected page */
+ case MMUFCR_xFC_TYPE_READ:
+ goto bad_area;
+
+ /* read from absent page present */
+ case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_READ:
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto bad_area;
+ break;
+ }
+
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+ fault = handle_mm_fault(mm, vma, address, write);
+ if (unlikely(fault & VM_FAULT_ERROR)) {
+ if (fault & VM_FAULT_OOM)
+ goto out_of_memory;
+ else if (fault & VM_FAULT_SIGBUS)
+ goto do_sigbus;
+ BUG();
+ }
+ if (fault & VM_FAULT_MAJOR)
+ current->maj_flt++;
+ else
+ current->min_flt++;
+
+ up_read(&mm->mmap_sem);
+ return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+
+ /* User mode accesses just cause a SIGSEGV */
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ /* info.si_code has been set above */
+ info.si_addr = (void *)address;
+ force_sig_info(SIGSEGV, &info, tsk);
+ return;
+ }
+
+no_context:
+ monitor_signal(regs);
+ /* Are we prepared to handle this kernel fault? */
+ if (fixup_exception(regs))
+ return;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+ bust_spinlocks(1);
+
+ if (address < PAGE_SIZE)
+ printk(KERN_ALERT
+ "Unable to handle kernel NULL pointer dereference");
+ else
+ printk(KERN_ALERT
+ "Unable to handle kernel paging request");
+ printk(" at virtual address %08lx\n", address);
+ printk(" printing pc:\n");
+ printk(KERN_ALERT "%08lx\n", regs->pc);
+
+#ifdef CONFIG_GDBSTUB
+ gdbstub_intercept(
+ regs, fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR);
+#endif
+
+ page = PTBR;
+ page = ((unsigned long *) __va(page))[address >> 22];
+ printk(KERN_ALERT "*pde = %08lx\n", page);
+ if (page & 1) {
+ page &= PAGE_MASK;
+ address &= 0x003ff000;
+ page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT];
+ printk(KERN_ALERT "*pte = %08lx\n", page);
+ }
+
+ die("Oops", regs, fault_code);
+ do_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+ printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
+ do_exit(SIGKILL);
+ goto no_context;
+
+do_sigbus:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+
+ /*
+ * Send a sigbus, regardless of whether we were in kernel
+ * or user mode.
+ */
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRERR;
+ info.si_addr = (void *)address;
+ force_sig_info(SIGBUS, &info, tsk);
+
+ /* Kernel mode? Handle exceptions or die */
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
+ goto no_context;
+ return;
+
+vmalloc_fault:
+ {
+ /*
+ * Synchronize this task's top level page-table
+ * with the 'reference' page table.
+ *
+ * Do _not_ use "tsk" here. We might be inside
+ * an interrupt in the middle of a task switch..
+ */
+ int index = pgd_index(address);
+ pgd_t *pgd, *pgd_k;
+ pud_t *pud, *pud_k;
+ pmd_t *pmd, *pmd_k;
+ pte_t *pte_k;
+
+ pgd_k = init_mm.pgd + index;
+
+ if (!pgd_present(*pgd_k))
+ goto no_context;
+
+ pud_k = pud_offset(pgd_k, address);
+ if (!pud_present(*pud_k))
+ goto no_context;
+
+ pmd_k = pmd_offset(pud_k, address);
+ if (!pmd_present(*pmd_k))
+ goto no_context;
+
+ pgd = (pgd_t *) PTBR + index;
+ pud = pud_offset(pgd, address);
+ pmd = pmd_offset(pud, address);
+ set_pmd(pmd, *pmd_k);
+
+ pte_k = pte_offset_kernel(pmd_k, address);
+ if (!pte_present(*pte_k))
+ goto no_context;
+ return;
+ }
+}
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
new file mode 100644
index 0000000..8c5d88c
--- /dev/null
+++ b/arch/mn10300/mm/init.c
@@ -0,0 +1,160 @@
+/* MN10300 Memory management initialisation
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/dma.h>
+#include <asm/tlb.h>
+#include <asm/sections.h>
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+unsigned long highstart_pfn, highend_pfn;
+
+/*
+ * set up paging
+ */
+void __init paging_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES] = {0,};
+ pte_t *ppte;
+ int loop;
+
+ /* main kernel space -> RAM mapping is handled as 1:1 transparent by
+ * the MMU */
+ memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
+ memset(kernel_vmalloc_ptes, 0, sizeof(kernel_vmalloc_ptes));
+
+ /* load the VMALLOC area PTE table addresses into the kernel PGD */
+ ppte = kernel_vmalloc_ptes;
+ for (loop = VMALLOC_START / (PAGE_SIZE * PTRS_PER_PTE);
+ loop < VMALLOC_END / (PAGE_SIZE * PTRS_PER_PTE);
+ loop++
+ ) {
+ set_pgd(swapper_pg_dir + loop, __pgd(__pa(ppte) | _PAGE_TABLE));
+ ppte += PAGE_SIZE / sizeof(pte_t);
+ }
+
+ /* declare the sizes of the RAM zones (only use the normal zone) */
+ zones_size[ZONE_NORMAL] =
+ (contig_page_data.bdata->node_low_pfn) -
+ (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT);
+
+ /* pass the memory from the bootmem allocator to the main allocator */
+ free_area_init(zones_size);
+
+ __flush_tlb_all();
+}
+
+/*
+ * transfer all the memory from the bootmem allocator to the runtime allocator
+ */
+void __init mem_init(void)
+{
+ int codesize, reservedpages, datasize, initsize;
+ int tmp;
+
+ if (!mem_map)
+ BUG();
+
+#define START_PFN (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT)
+#define MAX_LOW_PFN (contig_page_data.bdata->node_low_pfn)
+
+ max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
+ high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE);
+
+ /* clear the zero-page */
+ memset(empty_zero_page, 0, PAGE_SIZE);
+
+ /* this will put all low memory onto the freelists */
+ totalram_pages += free_all_bootmem();
+
+ reservedpages = 0;
+ for (tmp = 0; tmp < num_physpages; tmp++)
+ if (PageReserved(&mem_map[tmp]))
+ reservedpages++;
+
+ codesize = (unsigned long) &_etext - (unsigned long) &_stext;
+ datasize = (unsigned long) &_edata - (unsigned long) &_etext;
+ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+ printk(KERN_INFO
+ "Memory: %luk/%luk available"
+ " (%dk kernel code, %dk reserved, %dk data, %dk init,"
+ " %ldk highmem)\n",
+ (unsigned long) nr_free_pages() << (PAGE_SHIFT - 10),
+ max_mapnr << (PAGE_SHIFT - 10),
+ codesize >> 10,
+ reservedpages << (PAGE_SHIFT - 10),
+ datasize >> 10,
+ initsize >> 10,
+ (unsigned long) (totalhigh_pages << (PAGE_SHIFT - 10))
+ );
+}
+
+/*
+ *
+ */
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+ unsigned long addr;
+
+ for (addr = begin; addr < end; addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ memset((void *) addr, 0xcc, PAGE_SIZE);
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+/*
+ * recycle memory containing stuff only required for initialisation
+ */
+void free_initmem(void)
+{
+ free_init_pages("unused kernel memory",
+ (unsigned long) &__init_begin,
+ (unsigned long) &__init_end);
+}
+
+/*
+ * dispose of the memory on which the initial ramdisk resided
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ free_init_pages("initrd memory", start, end);
+}
+#endif
diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c
new file mode 100644
index 0000000..32aa89d
--- /dev/null
+++ b/arch/mn10300/mm/misalignment.c
@@ -0,0 +1,661 @@
+/* MN10300 Misalignment fixup handler
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/cpu-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/fpu.h>
+#include <asm/gdb-stub.h>
+#include <asm/asm-offsets.h>
+
+#if 0
+#define kdebug(FMT, ...) printk(KERN_DEBUG FMT, ##__VA_ARGS__)
+#else
+#define kdebug(FMT, ...) do {} while (0)
+#endif
+
+static int misalignment_addr(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ void **_address, unsigned long **_postinc);
+
+static int misalignment_reg(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ unsigned long **_register);
+
+static inline unsigned int_log2(unsigned x)
+{
+ unsigned y;
+ asm("bsch %1,%0" : "=r"(y) : "r"(x), "0"(0));
+ return y;
+}
+#define log2(x) int_log2(x)
+
+static const unsigned Dreg_index[] = {
+ REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2
+};
+
+static const unsigned Areg_index[] = {
+ REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2
+};
+
+static const unsigned Rreg_index[] = {
+ REG_E0 >> 2, REG_E1 >> 2, REG_E2 >> 2, REG_E3 >> 2,
+ REG_E4 >> 2, REG_E5 >> 2, REG_E6 >> 2, REG_E7 >> 2,
+ REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2,
+ REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2
+};
+
+enum format_id {
+ FMT_S0,
+ FMT_S1,
+ FMT_S2,
+ FMT_S4,
+ FMT_D0,
+ FMT_D1,
+ FMT_D2,
+ FMT_D4,
+ FMT_D6,
+ FMT_D7,
+ FMT_D8,
+ FMT_D9,
+};
+
+struct {
+ u_int8_t opsz, dispsz;
+} format_tbl[16] = {
+ [FMT_S0] = { 8, 0 },
+ [FMT_S1] = { 8, 8 },
+ [FMT_S2] = { 8, 16 },
+ [FMT_S4] = { 8, 32 },
+ [FMT_D0] = { 16, 0 },
+ [FMT_D1] = { 16, 8 },
+ [FMT_D2] = { 16, 16 },
+ [FMT_D4] = { 16, 32 },
+ [FMT_D6] = { 24, 0 },
+ [FMT_D7] = { 24, 8 },
+ [FMT_D8] = { 24, 24 },
+ [FMT_D9] = { 24, 32 },
+};
+
+enum value_id {
+ DM0, /* data reg in opcode in bits 0-1 */
+ DM1, /* data reg in opcode in bits 2-3 */
+ DM2, /* data reg in opcode in bits 4-5 */
+ AM0, /* addr reg in opcode in bits 0-1 */
+ AM1, /* addr reg in opcode in bits 2-3 */
+ AM2, /* addr reg in opcode in bits 4-5 */
+ RM0, /* reg in opcode in bits 0-3 */
+ RM1, /* reg in opcode in bits 2-5 */
+ RM2, /* reg in opcode in bits 4-7 */
+ RM4, /* reg in opcode in bits 8-11 */
+ RM6, /* reg in opcode in bits 12-15 */
+
+ RD0, /* reg in displacement in bits 0-3 */
+ RD2, /* reg in displacement in bits 4-7 */
+
+ SP, /* stack pointer */
+
+ SD8, /* 8-bit signed displacement */
+ SD16, /* 16-bit signed displacement */
+ SD24, /* 24-bit signed displacement */
+ SIMM4_2, /* 4-bit signed displacement in opcode bits 4-7 */
+ SIMM8, /* 8-bit signed immediate */
+ IMM24, /* 24-bit unsigned immediate */
+ IMM32, /* 32-bit unsigned immediate */
+ IMM32_HIGH8, /* 32-bit unsigned immediate, high 8-bits in opcode */
+
+ DN0 = DM0,
+ DN1 = DM1,
+ DN2 = DM2,
+ AN0 = AM0,
+ AN1 = AM1,
+ AN2 = AM2,
+ RN0 = RM0,
+ RN1 = RM1,
+ RN2 = RM2,
+ RN4 = RM4,
+ RN6 = RM6,
+ DI = DM1,
+ RI = RM2,
+
+};
+
+struct mn10300_opcode {
+ const char *name;
+ u_int32_t opcode;
+ u_int32_t opmask;
+ unsigned exclusion;
+
+ enum format_id format;
+
+ unsigned cpu_mask;
+#define AM33 330
+
+ unsigned params[2];
+#define MEM(ADDR) (0x80000000 | (ADDR))
+#define MEM2(ADDR1, ADDR2) (0x80000000 | (ADDR1) << 8 | (ADDR2))
+#define MEMINC(ADDR) (0x81000000 | (ADDR))
+#define MEMINC2(ADDR, INC) (0x81000000 | (ADDR) << 8 | (INC))
+};
+
+/* LIBOPCODES EXCERPT
+ Assemble Matsushita MN10300 instructions.
+ Copyright 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public Licence as published by
+ the Free Software Foundation; either version 2 of the Licence, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public Licence for more details.
+
+ You should have received a copy of the GNU General Public Licence
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+static const struct mn10300_opcode mn10300_opcodes[] = {
+{ "mov", 0x60, 0xf0, 0, FMT_S0, 0, {DM1, MEM(AN0)}},
+{ "mov", 0x70, 0xf0, 0, FMT_S0, 0, {MEM(AM0), DN1}},
+{ "mov", 0xf000, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), AN1}},
+{ "mov", 0xf010, 0xfff0, 0, FMT_D0, 0, {AM1, MEM(AN0)}},
+{ "mov", 0xf300, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), DN2}},
+{ "mov", 0xf340, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}},
+{ "mov", 0xf380, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), AN2}},
+{ "mov", 0xf3c0, 0xffc0, 0, FMT_D0, 0, {AM2, MEM2(DI, AN0)}},
+{ "mov", 0xf80000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}},
+{ "mov", 0xf81000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}},
+{ "mov", 0xf82000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8,AM0), AN1}},
+{ "mov", 0xf83000, 0xfff000, 0, FMT_D1, 0, {AM1, MEM2(SD8, AN0)}},
+{ "mov", 0xf8f000, 0xfffc00, 0, FMT_D1, AM33, {MEM2(SD8, AM0), SP}},
+{ "mov", 0xf8f400, 0xfffc00, 0, FMT_D1, AM33, {SP, MEM2(SD8, AN0)}},
+{ "mov", 0xf90a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}},
+{ "mov", 0xf91a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}},
+{ "mov", 0xf96a00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}},
+{ "mov", 0xf97a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}},
+{ "mov", 0xfa000000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}},
+{ "mov", 0xfa100000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}},
+{ "mov", 0xfa200000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), AN1}},
+{ "mov", 0xfa300000, 0xfff00000, 0, FMT_D2, 0, {AM1, MEM2(SD16, AN0)}},
+{ "mov", 0xfb0a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}},
+{ "mov", 0xfb1a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}},
+{ "mov", 0xfb6a0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}},
+{ "mov", 0xfb7a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}},
+{ "mov", 0xfb8e0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}},
+{ "mov", 0xfb9e0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}},
+{ "mov", 0xfc000000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}},
+{ "mov", 0xfc100000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}},
+{ "mov", 0xfc200000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), AN1}},
+{ "mov", 0xfc300000, 0xfff00000, 0, FMT_D4, 0, {AM1, MEM2(IMM32,AN0)}},
+{ "mov", 0xfd0a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}},
+{ "mov", 0xfd1a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}},
+{ "mov", 0xfd6a0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}},
+{ "mov", 0xfd7a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}},
+{ "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}},
+{ "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}},
+{ "mov", 0xfe6a0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}},
+{ "mov", 0xfe7a0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}},
+
+{ "movhu", 0xf060, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), DN1}},
+{ "movhu", 0xf070, 0xfff0, 0, FMT_D0, 0, {DM1, MEM(AN0)}},
+{ "movhu", 0xf480, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), DN2}},
+{ "movhu", 0xf4c0, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}},
+{ "movhu", 0xf86000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}},
+{ "movhu", 0xf87000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}},
+{ "movhu", 0xf94a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}},
+{ "movhu", 0xf95a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}},
+{ "movhu", 0xf9ea00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}},
+{ "movhu", 0xf9fa00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}},
+{ "movhu", 0xfa600000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}},
+{ "movhu", 0xfa700000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}},
+{ "movhu", 0xfb4a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}},
+{ "movhu", 0xfb5a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}},
+{ "movhu", 0xfbce0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}},
+{ "movhu", 0xfbde0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}},
+{ "movhu", 0xfbea0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}},
+{ "movhu", 0xfbfa0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}},
+{ "movhu", 0xfc600000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}},
+{ "movhu", 0xfc700000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}},
+{ "movhu", 0xfd4a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}},
+{ "movhu", 0xfd5a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}},
+{ "movhu", 0xfdea0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}},
+{ "movhu", 0xfdfa0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}},
+{ "movhu", 0xfe4a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}},
+{ "movhu", 0xfe5a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}},
+{ "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}},
+{ "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}},
+{ 0, 0, 0, 0, 0, 0, {0}},
+};
+
+/*
+ * fix up misalignment problems where possible
+ */
+asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code)
+{
+ const struct exception_table_entry *fixup;
+ const struct mn10300_opcode *pop;
+ unsigned long *registers = (unsigned long *) regs;
+ unsigned long data, *store, *postinc;
+ mm_segment_t seg;
+ siginfo_t info;
+ uint32_t opcode, disp, noc, xo, xm;
+ uint8_t *pc, byte;
+ void *address;
+ unsigned tmp, npop;
+
+ kdebug("MISALIGN at %lx\n", regs->pc);
+
+ if (in_interrupt())
+ die("Misalignment trap in interrupt context", regs, code);
+
+ if (regs->epsw & EPSW_IE)
+ asm volatile("or %0,epsw" : : "i"(EPSW_IE));
+
+ seg = get_fs();
+ set_fs(KERNEL_DS);
+
+ fixup = search_exception_tables(regs->pc);
+
+ /* first thing to do is to match the opcode */
+ pc = (u_int8_t *) regs->pc;
+
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ opcode = byte;
+ noc = 8;
+
+ for (pop = mn10300_opcodes; pop->name; pop++) {
+ npop = log2(pop->opcode | pop->opmask);
+ if (npop <= 0 || npop > 31)
+ continue;
+ npop = (npop + 8) & ~7;
+
+ got_more_bits:
+ if (npop == noc) {
+ if ((opcode & pop->opmask) == pop->opcode)
+ goto found_opcode;
+ } else if (npop > noc) {
+ xo = pop->opcode >> (npop - noc);
+ xm = pop->opmask >> (npop - noc);
+
+ if ((opcode & xm) != xo)
+ continue;
+
+ /* we've got a partial match (an exact match on the
+ * first N bytes), so we need to get some more data */
+ pc++;
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ opcode = opcode << 8 | byte;
+ noc += 8;
+ goto got_more_bits;
+ } else {
+ /* there's already been a partial match as long as the
+ * complete match we're now considering, so this one
+ * should't match */
+ continue;
+ }
+ }
+
+ /* didn't manage to find a fixup */
+ if (!user_mode(regs))
+ printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n",
+ regs->pc, opcode);
+
+failed:
+ set_fs(seg);
+ if (die_if_no_fixup("misalignment error", regs, code))
+ return;
+
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRALN;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGBUS, &info, current);
+ return;
+
+ /* error reading opcodes */
+fetch_error:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %p: fault whilst reading instruction data\n",
+ pc);
+ goto failed;
+
+bad_addr_mode:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported addressing mode %x\n",
+ regs->pc, opcode);
+ goto failed;
+
+bad_reg_mode:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported register mode %x\n",
+ regs->pc, opcode);
+ goto failed;
+
+unsupported_instruction:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported instruction %x (%s)\n",
+ regs->pc, opcode, pop->name);
+ goto failed;
+
+transfer_failed:
+ set_fs(seg);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return;
+ }
+ if (die_if_no_fixup("misalignment fixup", regs, code))
+ return;
+
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ info.si_code = 0;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGSEGV, &info, current);
+ return;
+
+ /* we matched the opcode */
+found_opcode:
+ kdebug("MISALIGN: %lx: %x==%x { %x, %x }\n",
+ regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]);
+
+ tmp = format_tbl[pop->format].opsz;
+ if (tmp > noc)
+ BUG(); /* match was less complete than it ought to have been */
+
+ if (tmp < noc) {
+ tmp = noc - tmp;
+ opcode >>= tmp;
+ pc -= tmp >> 3;
+ }
+
+ /* grab the extra displacement (note it's LSB first) */
+ disp = 0;
+ tmp = format_tbl[pop->format].dispsz >> 3;
+ while (tmp > 0) {
+ tmp--;
+ disp <<= 8;
+
+ pc++;
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ disp |= byte;
+ }
+
+ set_fs(KERNEL_XDS);
+ if (fixup || regs->epsw & EPSW_nSL)
+ set_fs(seg);
+
+ tmp = (pop->params[0] ^ pop->params[1]) & 0x80000000;
+ if (!tmp) {
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx:"
+ " insn not move to/from memory %x\n",
+ regs->pc, opcode);
+ goto failed;
+ }
+
+ if (pop->params[0] & 0x80000000) {
+ /* move memory to register */
+ if (!misalignment_addr(registers, pop->params[0], opcode, disp,
+ &address, &postinc))
+ goto bad_addr_mode;
+
+ if (!misalignment_reg(registers, pop->params[1], opcode, disp,
+ &store))
+ goto bad_reg_mode;
+
+ if (strcmp(pop->name, "mov") == 0) {
+ kdebug("FIXUP: mov (%p),DARn\n", address);
+ if (copy_from_user(&data, (void *) address, 4) != 0)
+ goto transfer_failed;
+ if (pop->params[0] & 0x1000000)
+ *postinc += 4;
+ } else if (strcmp(pop->name, "movhu") == 0) {
+ kdebug("FIXUP: movhu (%p),DARn\n", address);
+ data = 0;
+ if (copy_from_user(&data, (void *) address, 2) != 0)
+ goto transfer_failed;
+ if (pop->params[0] & 0x1000000)
+ *postinc += 2;
+ } else {
+ goto unsupported_instruction;
+ }
+
+ *store = data;
+ } else {
+ /* move register to memory */
+ if (!misalignment_reg(registers, pop->params[0], opcode, disp,
+ &store))
+ goto bad_reg_mode;
+
+ if (!misalignment_addr(registers, pop->params[1], opcode, disp,
+ &address, &postinc))
+ goto bad_addr_mode;
+
+ data = *store;
+
+ if (strcmp(pop->name, "mov") == 0) {
+ kdebug("FIXUP: mov %lx,(%p)\n", data, address);
+ if (copy_to_user((void *) address, &data, 4) != 0)
+ goto transfer_failed;
+ if (pop->params[1] & 0x1000000)
+ *postinc += 4;
+ } else if (strcmp(pop->name, "movhu") == 0) {
+ kdebug("FIXUP: movhu %hx,(%p)\n",
+ (uint16_t) data, address);
+ if (copy_to_user((void *) address, &data, 2) != 0)
+ goto transfer_failed;
+ if (pop->params[1] & 0x1000000)
+ *postinc += 2;
+ } else {
+ goto unsupported_instruction;
+ }
+ }
+
+ tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz;
+ regs->pc += tmp >> 3;
+
+ set_fs(seg);
+ return;
+}
+
+/*
+ * determine the address that was being accessed
+ */
+static int misalignment_addr(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ void **_address, unsigned long **_postinc)
+{
+ unsigned long *postinc = NULL, address = 0, tmp;
+
+ params &= 0x7fffffff;
+
+ do {
+ switch (params & 0xff) {
+ case DM0:
+ postinc = ®isters[Dreg_index[opcode & 0x03]];
+ address += *postinc;
+ break;
+ case DM1:
+ postinc = ®isters[Dreg_index[opcode >> 2 & 0x0c]];
+ address += *postinc;
+ break;
+ case DM2:
+ postinc = ®isters[Dreg_index[opcode >> 4 & 0x30]];
+ address += *postinc;
+ break;
+ case AM0:
+ postinc = ®isters[Areg_index[opcode & 0x03]];
+ address += *postinc;
+ break;
+ case AM1:
+ postinc = ®isters[Areg_index[opcode >> 2 & 0x0c]];
+ address += *postinc;
+ break;
+ case AM2:
+ postinc = ®isters[Areg_index[opcode >> 4 & 0x30]];
+ address += *postinc;
+ break;
+ case RM0:
+ postinc = ®isters[Rreg_index[opcode & 0x0f]];
+ address += *postinc;
+ break;
+ case RM1:
+ postinc = ®isters[Rreg_index[opcode >> 2 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM2:
+ postinc = ®isters[Rreg_index[opcode >> 4 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM4:
+ postinc = ®isters[Rreg_index[opcode >> 8 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM6:
+ postinc = ®isters[Rreg_index[opcode >> 12 & 0x0f]];
+ address += *postinc;
+ break;
+ case RD0:
+ postinc = ®isters[Rreg_index[disp & 0x0f]];
+ address += *postinc;
+ break;
+ case RD2:
+ postinc = ®isters[Rreg_index[disp >> 4 & 0x0f]];
+ address += *postinc;
+ break;
+
+ case SD8:
+ case SIMM8:
+ address += (int32_t) (int8_t) (disp & 0xff);
+ break;
+ case SD16:
+ address += (int32_t) (int16_t) (disp & 0xffff);
+ break;
+ case SD24:
+ tmp = disp << 8;
+ asm("asr 8,%0" : "=r"(tmp) : "0"(tmp));
+ address += tmp;
+ break;
+ case SIMM4_2:
+ tmp = opcode >> 4 & 0x0f;
+ tmp <<= 28;
+ asm("asr 28,%0" : "=r"(tmp) : "0"(tmp));
+ address += tmp;
+ break;
+ case IMM24:
+ address += disp & 0x00ffffff;
+ break;
+ case IMM32:
+ case IMM32_HIGH8:
+ address += disp;
+ break;
+ default:
+ return 0;
+ }
+ } while ((params >>= 8));
+
+ *_address = (void *) address;
+ *_postinc = postinc;
+ return 1;
+}
+
+/*
+ * determine the register that is acting as source/dest
+ */
+static int misalignment_reg(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ unsigned long **_register)
+{
+ params &= 0x7fffffff;
+
+ if (params & 0xffffff00)
+ return 0;
+
+ switch (params & 0xff) {
+ case DM0:
+ *_register = ®isters[Dreg_index[opcode & 0x03]];
+ break;
+ case DM1:
+ *_register = ®isters[Dreg_index[opcode >> 2 & 0x03]];
+ break;
+ case DM2:
+ *_register = ®isters[Dreg_index[opcode >> 4 & 0x03]];
+ break;
+ case AM0:
+ *_register = ®isters[Areg_index[opcode & 0x03]];
+ break;
+ case AM1:
+ *_register = ®isters[Areg_index[opcode >> 2 & 0x03]];
+ break;
+ case AM2:
+ *_register = ®isters[Areg_index[opcode >> 4 & 0x03]];
+ break;
+ case RM0:
+ *_register = ®isters[Rreg_index[opcode & 0x0f]];
+ break;
+ case RM1:
+ *_register = ®isters[Rreg_index[opcode >> 2 & 0x0f]];
+ break;
+ case RM2:
+ *_register = ®isters[Rreg_index[opcode >> 4 & 0x0f]];
+ break;
+ case RM4:
+ *_register = ®isters[Rreg_index[opcode >> 8 & 0x0f]];
+ break;
+ case RM6:
+ *_register = ®isters[Rreg_index[opcode >> 12 & 0x0f]];
+ break;
+ case RD0:
+ *_register = ®isters[Rreg_index[disp & 0x0f]];
+ break;
+ case RD2:
+ *_register = ®isters[Rreg_index[disp >> 4 & 0x0f]];
+ break;
+ case SP:
+ *_register = ®isters[REG_SP >> 2];
+ break;
+
+ default:
+ return 0;
+ }
+
+ return 1;
+}
diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c
new file mode 100644
index 0000000..31c9d27
--- /dev/null
+++ b/arch/mn10300/mm/mmu-context.c
@@ -0,0 +1,80 @@
+/* MN10300 MMU context allocation and management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+/*
+ * list of the MMU contexts last allocated on each CPU
+ */
+unsigned long mmu_context_cache[NR_CPUS] = {
+ [0 ... NR_CPUS - 1] = MMU_CONTEXT_FIRST_VERSION * 2 - 1,
+};
+
+/*
+ * flush the specified TLB entry
+ */
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+ unsigned long pteu, cnx, flags;
+
+ addr &= PAGE_MASK;
+
+ /* make sure the context doesn't migrate and defend against
+ * interference from vmalloc'd regions */
+ local_irq_save(flags);
+
+ cnx = mm_context(vma->vm_mm);
+
+ if (cnx != MMU_NO_CONTEXT) {
+ pteu = addr | (cnx & 0x000000ffUL);
+ IPTEU = pteu;
+ DPTEU = pteu;
+ if (IPTEL & xPTEL_V)
+ IPTEL = 0;
+ if (DPTEL & xPTEL_V)
+ DPTEL = 0;
+ }
+
+ local_irq_restore(flags);
+}
+
+/*
+ * preemptively set a TLB entry
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+ unsigned long pteu, ptel, cnx, flags;
+
+ addr &= PAGE_MASK;
+ ptel = pte_val(pte) & ~(xPTEL_UNUSED1 | xPTEL_UNUSED2);
+
+ /* make sure the context doesn't migrate and defend against
+ * interference from vmalloc'd regions */
+ local_irq_save(flags);
+
+ cnx = mm_context(vma->vm_mm);
+
+ if (cnx != MMU_NO_CONTEXT) {
+ pteu = addr | (cnx & 0x000000ffUL);
+ if (!(pte_val(pte) & _PAGE_NX)) {
+ IPTEU = pteu;
+ if (IPTEL & xPTEL_V)
+ IPTEL = ptel;
+ }
+ DPTEU = pteu;
+ if (DPTEL & xPTEL_V)
+ DPTEL = ptel;
+ }
+
+ local_irq_restore(flags);
+}
diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
new file mode 100644
index 0000000..a477038
--- /dev/null
+++ b/arch/mn10300/mm/pgtable.c
@@ -0,0 +1,197 @@
+/* MN10300 Page table management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/spinlock.h>
+#include <linux/quicklist.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+void show_mem(void)
+{
+ unsigned long i;
+ int free = 0, total = 0, reserved = 0, shared = 0;
+
+ int cached = 0;
+ printk(KERN_INFO "Mem-info:\n");
+ show_free_areas();
+ i = max_mapnr;
+ while (i-- > 0) {
+ total++;
+ if (PageReserved(mem_map + i))
+ reserved++;
+ else if (PageSwapCache(mem_map + i))
+ cached++;
+ else if (!page_count(mem_map + i))
+ free++;
+ else
+ shared += page_count(mem_map + i) - 1;
+ }
+ printk(KERN_INFO "%d pages of RAM\n", total);
+ printk(KERN_INFO "%d free pages\n", free);
+ printk(KERN_INFO "%d reserved pages\n", reserved);
+ printk(KERN_INFO "%d pages shared\n", shared);
+ printk(KERN_INFO "%d pages swap cached\n", cached);
+}
+
+/*
+ * Associate a large virtual page frame with a given physical page frame
+ * and protection flags for that frame. pfn is for the base of the page,
+ * vaddr is what the page gets mapped to - both must be properly aligned.
+ * The pmd must already be instantiated. Assumes PAE mode.
+ */
+void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+
+ if (vaddr & (PMD_SIZE-1)) { /* vaddr is misaligned */
+ printk(KERN_ERR "set_pmd_pfn: vaddr misaligned\n");
+ return; /* BUG(); */
+ }
+ if (pfn & (PTRS_PER_PTE-1)) { /* pfn is misaligned */
+ printk(KERN_ERR "set_pmd_pfn: pfn misaligned\n");
+ return; /* BUG(); */
+ }
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ if (pgd_none(*pgd)) {
+ printk(KERN_ERR "set_pmd_pfn: pgd_none\n");
+ return; /* BUG(); */
+ }
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
+ set_pmd(pmd, pfn_pmd(pfn, flags));
+ /*
+ * It's enough to flush this one mapping.
+ * (PGE mappings get flushed as well)
+ */
+ __flush_tlb_one(vaddr);
+}
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+ pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+ if (pte)
+ clear_page(pte);
+ return pte;
+}
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ struct page *pte;
+
+#ifdef CONFIG_HIGHPTE
+ pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT, 0);
+#else
+ pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
+#endif
+ if (pte)
+ clear_highpage(pte);
+ return pte;
+}
+
+/*
+ * List of all pgd's needed for non-PAE so it can invalidate entries
+ * in both cached and uncached pgd's; not needed for PAE since the
+ * kernel pmd is shared. If PAE were not to share the pmd a similar
+ * tactic would be needed. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * If the locking proves to be non-performant, a ticketing scheme with
+ * checks at dup_mmap(), exec(), and other mmlist addition points
+ * could be used. The locking scheme was chosen on the basis of
+ * manfred's recommendations and having no core impact whatsoever.
+ * -- wli
+ */
+DEFINE_SPINLOCK(pgd_lock);
+struct page *pgd_list;
+
+static inline void pgd_list_add(pgd_t *pgd)
+{
+ struct page *page = virt_to_page(pgd);
+ page->index = (unsigned long) pgd_list;
+ if (pgd_list)
+ set_page_private(pgd_list, (unsigned long) &page->index);
+ pgd_list = page;
+ set_page_private(page, (unsigned long) &pgd_list);
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+ struct page *next, **pprev, *page = virt_to_page(pgd);
+ next = (struct page *) page->index;
+ pprev = (struct page **) page_private(page);
+ *pprev = next;
+ if (next)
+ set_page_private(next, (unsigned long) pprev);
+}
+
+void pgd_ctor(void *pgd)
+{
+ unsigned long flags;
+
+ if (PTRS_PER_PMD == 1)
+ spin_lock_irqsave(&pgd_lock, flags);
+
+ memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD,
+ swapper_pg_dir + USER_PTRS_PER_PGD,
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+
+ if (PTRS_PER_PMD > 1)
+ return;
+
+ pgd_list_add(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+ memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
+}
+
+/* never called when PTRS_PER_PMD > 1 */
+void pgd_dtor(void *pgd)
+{
+ unsigned long flags; /* can be called from interrupt context */
+
+ spin_lock_irqsave(&pgd_lock, flags);
+ pgd_list_del(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ return quicklist_alloc(0, GFP_KERNEL, pgd_ctor);
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ quicklist_free(0, pgd_dtor, pgd);
+}
+
+void __init pgtable_cache_init(void)
+{
+}
+
+void check_pgt_cache(void)
+{
+ quicklist_trim(0, pgd_dtor, 25, 16);
+}
diff --git a/arch/mn10300/mm/tlb-mn10300.S b/arch/mn10300/mm/tlb-mn10300.S
new file mode 100644
index 0000000..7892080
--- /dev/null
+++ b/arch/mn10300/mm/tlb-mn10300.S
@@ -0,0 +1,207 @@
+###############################################################################
+#
+# TLB loading functions
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/intctl-regs.h>
+#include <asm/frame.inc>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+###############################################################################
+#
+# Instruction TLB Miss handler entry point
+#
+###############################################################################
+ .type itlb_miss,@function
+ENTRY(itlb_miss)
+ and ~EPSW_NMID,epsw
+#ifdef CONFIG_GDBSTUB
+ movm [d2,d3,a2],(sp)
+#else
+ or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate
+ # register bank
+ nop
+ nop
+ nop
+#endif
+
+ mov (IPTEU),d3
+ mov (PTBR),a2
+ mov d3,d2
+ and 0xffc00000,d2
+ lsr 20,d2
+ mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22]
+ btst _PAGE_VALID,a2
+ beq itlb_miss_fault # jump if doesn't point anywhere
+
+ and ~(PAGE_SIZE-1),a2
+ mov d3,d2
+ and 0x003ff000,d2
+ lsr 10,d2
+ add d2,a2
+ mov (a2),d2 # get pte from PTD[addr 21..12]
+ btst _PAGE_VALID,d2
+ beq itlb_miss_fault # jump if doesn't point to a page
+ # (might be a swap id)
+ bset _PAGE_ACCESSED,(0,a2)
+ and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
+itlb_miss_set:
+ mov d2,(IPTEL) # change the TLB
+#ifdef CONFIG_GDBSTUB
+ movm (sp),[d2,d3,a2]
+#endif
+ rti
+
+itlb_miss_fault:
+ mov _PAGE_VALID,d2 # force address error handler to be
+ # invoked
+ bra itlb_miss_set
+
+ .size itlb_miss, . - itlb_miss
+
+###############################################################################
+#
+# Data TLB Miss handler entry point
+#
+###############################################################################
+ .type dtlb_miss,@function
+ENTRY(dtlb_miss)
+ and ~EPSW_NMID,epsw
+#ifdef CONFIG_GDBSTUB
+ movm [d2,d3,a2],(sp)
+#else
+ or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate
+ # register bank
+ nop
+ nop
+ nop
+#endif
+
+ mov (DPTEU),d3
+ mov (PTBR),a2
+ mov d3,d2
+ and 0xffc00000,d2
+ lsr 20,d2
+ mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22]
+ btst _PAGE_VALID,a2
+ beq dtlb_miss_fault # jump if doesn't point anywhere
+
+ and ~(PAGE_SIZE-1),a2
+ mov d3,d2
+ and 0x003ff000,d2
+ lsr 10,d2
+ add d2,a2
+ mov (a2),d2 # get pte from PTD[addr 21..12]
+ btst _PAGE_VALID,d2
+ beq dtlb_miss_fault # jump if doesn't point to a page
+ # (might be a swap id)
+ bset _PAGE_ACCESSED,(0,a2)
+ and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
+dtlb_miss_set:
+ mov d2,(DPTEL) # change the TLB
+#ifdef CONFIG_GDBSTUB
+ movm (sp),[d2,d3,a2]
+#endif
+ rti
+
+dtlb_miss_fault:
+ mov _PAGE_VALID,d2 # force address error handler to be
+ # invoked
+ bra dtlb_miss_set
+ .size dtlb_miss, . - dtlb_miss
+
+###############################################################################
+#
+# Instruction TLB Address Error handler entry point
+#
+###############################################################################
+ .type itlb_aerror,@function
+ENTRY(itlb_aerror)
+ and ~EPSW_NMID,epsw
+ add -4,sp
+ SAVE_ALL
+ add -4,sp # need to pass three params
+
+ # calculate the fault code
+ movhu (MMUFCR_IFC),d1
+ or 0x00010000,d1 # it's an instruction fetch
+
+ # determine the page address
+ mov (IPTEU),a2
+ mov a2,d0
+ and PAGE_MASK,d0
+ mov d0,(12,sp)
+
+ clr d0
+ mov d0,(IPTEL)
+
+ and ~EPSW_NMID,epsw
+ or EPSW_IE,epsw
+ mov fp,d0
+ call do_page_fault[],0 # do_page_fault(regs,code,addr
+
+ jmp ret_from_exception
+ .size itlb_aerror, . - itlb_aerror
+
+###############################################################################
+#
+# Data TLB Address Error handler entry point
+#
+###############################################################################
+ .type dtlb_aerror,@function
+ENTRY(dtlb_aerror)
+ and ~EPSW_NMID,epsw
+ add -4,sp
+ mov d1,(sp)
+
+ movhu (MMUFCR_DFC),d1 # is it the initial valid write
+ # to this page?
+ and MMUFCR_xFC_INITWR,d1
+ beq dtlb_pagefault # jump if not
+
+ mov (DPTEL),d1 # set the dirty bit
+ # (don't replace with BSET!)
+ or _PAGE_DIRTY,d1
+ mov d1,(DPTEL)
+ mov (sp),d1
+ add 4,sp
+ rti
+
+ ALIGN
+dtlb_pagefault:
+ mov (sp),d1
+ SAVE_ALL
+ add -4,sp # need to pass three params
+
+ # calculate the fault code
+ movhu (MMUFCR_DFC),d1
+
+ # determine the page address
+ mov (DPTEU),a2
+ mov a2,d0
+ and PAGE_MASK,d0
+ mov d0,(12,sp)
+
+ clr d0
+ mov d0,(DPTEL)
+
+ and ~EPSW_NMID,epsw
+ or EPSW_IE,epsw
+ mov fp,d0
+ call do_page_fault[],0 # do_page_fault(regs,code,addr
+
+ jmp ret_from_exception
+ .size dtlb_aerror, . - dtlb_aerror
diff --git a/arch/mn10300/oprofile/Kconfig b/arch/mn10300/oprofile/Kconfig
new file mode 100644
index 0000000..19d3773
--- /dev/null
+++ b/arch/mn10300/oprofile/Kconfig
@@ -0,0 +1,23 @@
+
+menu "Profiling support"
+ depends on EXPERIMENTAL
+
+config PROFILING
+ bool "Profiling support (EXPERIMENTAL)"
+ help
+ Say Y here to enable the extended profiling support mechanisms used
+ by profilers such as OProfile.
+
+
+config OPROFILE
+ tristate "OProfile system profiling (EXPERIMENTAL)"
+ depends on PROFILING
+ help
+ OProfile is a profiling system capable of profiling the
+ whole system, include the kernel, kernel modules, libraries,
+ and applications.
+
+ If unsure, say N.
+
+endmenu
+
diff --git a/arch/mn10300/oprofile/Makefile b/arch/mn10300/oprofile/Makefile
new file mode 100644
index 0000000..918dbe6
--- /dev/null
+++ b/arch/mn10300/oprofile/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the MN10300-specific profiling code
+#
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+ oprof.o cpu_buffer.o buffer_sync.o \
+ event_buffer.o oprofile_files.o \
+ oprofilefs.o oprofile_stats.o \
+ timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) op_model_null.o
+
diff --git a/arch/mn10300/oprofile/op_model_null.c b/arch/mn10300/oprofile/op_model_null.c
new file mode 100644
index 0000000..cd4ab37
--- /dev/null
+++ b/arch/mn10300/oprofile/op_model_null.c
@@ -0,0 +1,22 @@
+/* Null profiling driver
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * Licence. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+ return -ENODEV;
+}
+
+void oprofile_arch_exit(void)
+{
+}
+
diff --git a/arch/mn10300/proc-mn103e010/Makefile b/arch/mn10300/proc-mn103e010/Makefile
new file mode 100644
index 0000000..ac2c978
--- /dev/null
+++ b/arch/mn10300/proc-mn103e010/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the MN103E010 processor chip specific code
+#
+obj-y := proc-init.o
+
diff --git a/arch/mn10300/proc-mn103e010/proc-init.c b/arch/mn10300/proc-mn103e010/proc-init.c
new file mode 100644
index 0000000..9a482ef
--- /dev/null
+++ b/arch/mn10300/proc-mn103e010/proc-init.c
@@ -0,0 +1,75 @@
+/* MN103E010 Processor initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <asm/rtc.h>
+
+/*
+ * initialise the on-silicon processor peripherals
+ */
+asmlinkage void __init processor_init(void)
+{
+ int loop;
+
+ /* set up the exception table first */
+ for (loop = 0x000; loop < 0x400; loop += 8)
+ __set_intr_stub(loop, __common_exception);
+
+ __set_intr_stub(EXCEP_ITLBMISS, itlb_miss);
+ __set_intr_stub(EXCEP_DTLBMISS, dtlb_miss);
+ __set_intr_stub(EXCEP_IAERROR, itlb_aerror);
+ __set_intr_stub(EXCEP_DAERROR, dtlb_aerror);
+ __set_intr_stub(EXCEP_BUSERROR, raw_bus_error);
+ __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault);
+ __set_intr_stub(EXCEP_SYSCALL0, system_call);
+
+ __set_intr_stub(EXCEP_NMI, nmi_handler);
+ __set_intr_stub(EXCEP_WDT, nmi_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL0, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL1, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL2, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL3, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL4, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL5, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL6, irq_handler);
+
+ IVAR0 = EXCEP_IRQ_LEVEL0;
+ IVAR1 = EXCEP_IRQ_LEVEL1;
+ IVAR2 = EXCEP_IRQ_LEVEL2;
+ IVAR3 = EXCEP_IRQ_LEVEL3;
+ IVAR4 = EXCEP_IRQ_LEVEL4;
+ IVAR5 = EXCEP_IRQ_LEVEL5;
+ IVAR6 = EXCEP_IRQ_LEVEL6;
+
+ mn10300_dcache_flush_inv();
+ mn10300_icache_inv();
+
+ /* disable all interrupts and set to priority 6 (lowest) */
+ for (loop = 0; loop < NR_IRQS; loop++)
+ GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
+
+ /* clear the timers */
+ TM0MD = 0;
+ TM1MD = 0;
+ TM2MD = 0;
+ TM3MD = 0;
+ TM4MD = 0;
+ TM5MD = 0;
+ TM6MD = 0;
+ TM6MDA = 0;
+ TM6MDB = 0;
+ TM7MD = 0;
+ TM8MD = 0;
+ TM9MD = 0;
+ TM10MD = 0;
+ TM11MD = 0;
+
+ calibrate_clock();
+}
diff --git a/arch/mn10300/unit-asb2303/Makefile b/arch/mn10300/unit-asb2303/Makefile
new file mode 100644
index 0000000..38a5bb4
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/Makefile
@@ -0,0 +1,6 @@
+###############################################################################
+#
+# Makefile for the ASB2303 board
+#
+###############################################################################
+obj-y := unit-init.o smc91111.o flash.o leds.o
diff --git a/arch/mn10300/unit-asb2303/flash.c b/arch/mn10300/unit-asb2303/flash.c
new file mode 100644
index 0000000..17fe083
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/flash.c
@@ -0,0 +1,100 @@
+/* Handle mapping of the flash on the ASB2303 board
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#define ASB2303_PROM_ADDR 0xA0000000 /* Boot PROM */
+#define ASB2303_PROM_SIZE (2 * 1024 * 1024)
+#define ASB2303_FLASH_ADDR 0xA4000000 /* System Flash */
+#define ASB2303_FLASH_SIZE (32 * 1024 * 1024)
+#define ASB2303_CONFIG_ADDR 0xA6000000 /* System Config EEPROM */
+#define ASB2303_CONFIG_SIZE (8 * 1024)
+
+/*
+ * default MTD partition table for both main flash devices, expected to be
+ * overridden by RedBoot
+ */
+static struct mtd_partition asb2303_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM /* force read-only */
+ }, {
+ .name = "Kernel",
+ .size = 0x00400000,
+ .offset = 0x00040000,
+ }, {
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00440000
+ }
+};
+
+/*
+ * the ASB2303 Boot PROM definition
+ */
+static struct physmap_flash_data asb2303_bootprom_data = {
+ .width = 2,
+ .nr_parts = 1,
+ .parts = asb2303_partitions,
+};
+
+static struct resource asb2303_bootprom_resource = {
+ .start = ASB2303_PROM_ADDR,
+ .end = ASB2303_PROM_ADDR + ASB2303_PROM_SIZE,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device asb2303_bootprom = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev.platform_data = &asb2303_bootprom_data,
+ .num_resources = 1,
+ .resource = &asb2303_bootprom_resource,
+};
+
+/*
+ * the ASB2303 System Flash definition
+ */
+static struct physmap_flash_data asb2303_sysflash_data = {
+ .width = 4,
+ .nr_parts = 1,
+ .parts = asb2303_partitions,
+};
+
+static struct resource asb2303_sysflash_resource = {
+ .start = ASB2303_FLASH_ADDR,
+ .end = ASB2303_FLASH_ADDR + ASB2303_FLASH_SIZE,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device asb2303_sysflash = {
+ .name = "physmap-flash",
+ .id = 1,
+ .dev.platform_data = &asb2303_sysflash_data,
+ .num_resources = 1,
+ .resource = &asb2303_sysflash_resource,
+};
+
+/*
+ * register the ASB2303 flashes
+ */
+static int __init asb2303_mtd_init(void)
+{
+ platform_device_register(&asb2303_bootprom);
+ platform_device_register(&asb2303_sysflash);
+ return 0;
+}
+
+module_init(asb2303_mtd_init);
diff --git a/arch/mn10300/unit-asb2303/leds.c b/arch/mn10300/unit-asb2303/leds.c
new file mode 100644
index 0000000..cd4bc78
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/leds.c
@@ -0,0 +1,52 @@
+/* ASB2303 peripheral 7-segment LEDs x1 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <asm/unit/leds.h>
+
+#if 0
+static const u8 asb2303_led_hex_tbl[16] = {
+ 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+ 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+#endif
+
+static const u8 asb2303_led_chase_tbl[6] = {
+ ~0x02, /* top - segA */
+ ~0x04, /* right top - segB */
+ ~0x08, /* right bottom - segC */
+ ~0x10, /* bottom - segD */
+ ~0x20, /* left bottom - segE */
+ ~0x40, /* left top - segF */
+};
+
+static unsigned asb2303_led_chase;
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+ ASB2303_GPIO0DEF = 0x5555; /* configure as an output port */
+ ASB2303_7SEGLEDS = 0x6d; /* triple horizontal bar */
+}
+
+void peripheral_leds_led_chase(void)
+{
+ ASB2303_GPIO0DEF = 0x5555; /* configure as an output port */
+ ASB2303_7SEGLEDS = asb2303_led_chase_tbl[asb2303_led_chase];
+ asb2303_led_chase++;
+ if (asb2303_led_chase >= 6)
+ asb2303_led_chase = 0;
+}
diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c
new file mode 100644
index 0000000..30875dd
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/smc91111.c
@@ -0,0 +1,52 @@
+/* ASB2303 initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/timex.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/unit/smc91111.h>
+
+static struct resource smc91c111_resources[] = {
+ [0] = {
+ .start = SMC91111_BASE,
+ .end = SMC91111_BASE_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SMC91111_IRQ,
+ .end = SMC91111_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91c111_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91c111_resources),
+ .resource = smc91c111_resources,
+};
+
+/*
+ * add platform devices
+ */
+static int __init unit_device_init(void)
+{
+ platform_device_register(&smc91c111_device);
+ return 0;
+}
+
+device_initcall(unit_device_init);
diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c
new file mode 100644
index 0000000..14b2c81
--- /dev/null
+++ b/arch/mn10300/unit-asb2303/unit-init.c
@@ -0,0 +1,60 @@
+/* ASB2303 initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/intctl-regs.h>
+
+/*
+ * initialise some of the unit hardware before gdbstub is set up
+ */
+asmlinkage void __init unit_init(void)
+{
+ /* set up the external interrupts */
+ SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_HILEVEL);
+ SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL);
+ SET_XIRQ_TRIGGER(3, XIRQ_TRIGGER_HILEVEL);
+ SET_XIRQ_TRIGGER(4, XIRQ_TRIGGER_LOWLEVEL);
+ SET_XIRQ_TRIGGER(5, XIRQ_TRIGGER_LOWLEVEL);
+}
+
+/*
+ * initialise the rest of the unit hardware after gdbstub is ready
+ */
+void __init unit_setup(void)
+{
+}
+
+/*
+ * initialise the external interrupts used by a unit of this type
+ */
+void __init unit_init_IRQ(void)
+{
+ unsigned int extnum;
+
+ for (extnum = 0; extnum < NR_XIRQS; extnum++) {
+ switch (GET_XIRQ_TRIGGER(extnum)) {
+ case XIRQ_TRIGGER_HILEVEL:
+ case XIRQ_TRIGGER_LOWLEVEL:
+ set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+ break;
+ default:
+ break;
+ }
+ }
+}
diff --git a/arch/mn10300/unit-asb2305/Makefile b/arch/mn10300/unit-asb2305/Makefile
new file mode 100644
index 0000000..0551022
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/Makefile
@@ -0,0 +1,8 @@
+###############################################################################
+#
+# Makefile for the ASB2305 board
+#
+###############################################################################
+obj-y := unit-init.o leds.o
+
+obj-$(CONFIG_PCI) += pci.o pci-asb2305.o pci-irq.o pci-iomap.o
diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c
new file mode 100644
index 0000000..e99dcc9
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/leds.c
@@ -0,0 +1,124 @@
+/* ASB2305 Peripheral 7-segment LEDs x4 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/cpu/intctl-regs.h>
+#include <asm/cpu/rtc-regs.h>
+#include <asm/unit/leds.h>
+
+static const u8 asb2305_led_hex_tbl[16] = {
+ 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+ 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+
+static const u32 asb2305_led_chase_tbl[6] = {
+ ~0x02020202, /* top - segA */
+ ~0x04040404, /* right top - segB */
+ ~0x08080808, /* right bottom - segC */
+ ~0x10101010, /* bottom - segD */
+ ~0x20202020, /* left bottom - segE */
+ ~0x40404040, /* left top - segF */
+};
+
+static unsigned asb2305_led_chase;
+
+void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(val/1000) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/100) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/10) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[val % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(val/1000) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/100) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/10) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[val % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(code/0x100) % 0x10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(code/0x10) % 0x10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[code % 0x10];
+ leds |= 0x6d010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_minssecs(unsigned int time, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(time/600) % 6];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(time/60) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(time/10) % 6];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[time % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_rtc(void)
+{
+ unsigned int clock;
+ u8 mins, secs;
+
+ mins = RTMCR;
+ secs = RTSCR;
+
+ clock = ((mins & 0xf0) >> 4);
+ clock *= 10;
+ clock += (mins & 0x0f);
+ clock *= 6;
+
+ clock += ((secs & 0xf0) >> 4);
+ clock *= 10;
+ clock += (secs & 0x0f);
+
+ peripheral_leds7x4_display_minssecs(clock, 0);
+}
+
+void peripheral_leds_led_chase(void)
+{
+ ASB2305_7SEGLEDS = asb2305_led_chase_tbl[asb2305_led_chase];
+ asb2305_led_chase++;
+ if (asb2305_led_chase >= 6)
+ asb2305_led_chase = 0;
+}
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
new file mode 100644
index 0000000..d100ca7
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -0,0 +1,303 @@
+/* ASB2305 PCI resource stuff
+ *
+ * Copyright (C) 2001 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/pci-i386.c
+ * - Copyright 1997--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include "pci-asb2305.h"
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+#if 0
+ struct pci_dev *dev = data;
+
+ printk(KERN_DEBUG
+ "### PCIBIOS_ALIGN_RESOURCE(%s,,{%08lx-%08lx,%08lx},%lx)\n",
+ pci_name(dev),
+ res->start,
+ res->end,
+ res->flags,
+ size
+ );
+#endif
+
+ if (res->flags & IORESOURCE_IO) {
+ unsigned long start = res->start;
+
+ if (start & 0x300) {
+ start = (start + 0x3ff) & ~0x3ff;
+ res->start = start;
+ }
+ }
+}
+
+
+/*
+ * Handle resources of PCI devices. If the world were perfect, we could
+ * just allocate all the resource regions and do nothing more. It isn't.
+ * On the other hand, we cannot just re-allocate all devices, as it would
+ * require us to know lots of host bridge internals. So we attempt to
+ * keep as much of the original configuration as possible, but tweak it
+ * when it's found to be wrong.
+ *
+ * Known BIOS problems we have to work around:
+ * - I/O or memory regions not configured
+ * - regions configured, but not enabled in the command register
+ * - bogus I/O addresses above 64K used
+ * - expansion ROMs left enabled (this may sound harmless, but given
+ * the fact the PCI specs explicitly allow address decoders to be
+ * shared between expansion ROMs and other resource regions, it's
+ * at least dangerous)
+ *
+ * Our solution:
+ * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ * This gives us fixed barriers on where we can allocate.
+ * (2) Allocate resources for all enabled devices. If there is
+ * a collision, just mark the resource as unallocated. Also
+ * disable expansion ROMs during this step.
+ * (3) Try to allocate resources for disabled devices. If the
+ * resources were assigned correctly, everything goes well,
+ * if they weren't, they won't disturb allocation of other
+ * resources.
+ * (4) Assign new addresses to resources which were either
+ * not configured at all or misconfigured. If explicitly
+ * requested by the user, configure expansion ROM address
+ * as well.
+ */
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ int idx;
+ struct resource *r, *pr;
+
+ /* Depth-First Search on bus tree */
+ list_for_each_entry(bus, bus_list, node) {
+ dev = bus->self;
+ if (dev) {
+ for (idx = PCI_BRIDGE_RESOURCES;
+ idx < PCI_NUM_RESOURCES;
+ idx++) {
+ r = &dev->resource[idx];
+ if (!r->flags)
+ continue;
+ pr = pci_find_parent_resource(dev, r);
+ if (!r->start ||
+ !pr ||
+ request_resource(pr, r) < 0) {
+ printk(KERN_ERR "PCI:"
+ " Cannot allocate resource"
+ " region %d of bridge %s\n",
+ idx, pci_name(dev));
+ /* Something is wrong with the region.
+ * Invalidate the resource to prevent
+ * child resource allocations in this
+ * range. */
+ r->flags = 0;
+ }
+ }
+ }
+ pcibios_allocate_bus_resources(&bus->children);
+ }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+ struct pci_dev *dev = NULL;
+ int idx, disabled;
+ u16 command;
+ struct resource *r, *pr;
+
+ for_each_pci_dev(dev) {
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ for (idx = 0; idx < 6; idx++) {
+ r = &dev->resource[idx];
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->start) /* Address not assigned */
+ continue;
+ if (r->flags & IORESOURCE_IO)
+ disabled = !(command & PCI_COMMAND_IO);
+ else
+ disabled = !(command & PCI_COMMAND_MEMORY);
+ if (pass == disabled) {
+ DBG("PCI[%s]: Resource %08lx-%08lx"
+ " (f=%lx, d=%d, p=%d)\n",
+ pci_name(dev), r->start, r->end, r->flags,
+ disabled, pass);
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0) {
+ printk(KERN_ERR "PCI:"
+ " Cannot allocate resource"
+ " region %d of device %s\n",
+ idx, pci_name(dev));
+ /* We'll assign a new address later */
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+ }
+ if (!pass) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (r->flags & IORESOURCE_ROM_ENABLE) {
+ /* Turn the ROM off, leave the resource region,
+ * but keep it unregistered. */
+ u32 reg;
+ DBG("PCI: Switching off ROM of %s\n",
+ pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_read_config_dword(
+ dev, dev->rom_base_reg, ®);
+ pci_write_config_dword(
+ dev, dev->rom_base_reg,
+ reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
+ }
+ }
+}
+
+static int __init pcibios_assign_resources(void)
+{
+ struct pci_dev *dev = NULL;
+ struct resource *r, *pr;
+
+ if (!(pci_probe & PCI_ASSIGN_ROMS)) {
+ /* Try to use BIOS settings for ROMs, otherwise let
+ pci_assign_unassigned_resources() allocate the new
+ addresses. */
+ for_each_pci_dev(dev) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (!r->flags || !r->start)
+ continue;
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0) {
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+ }
+
+ pci_assign_unassigned_resources();
+
+ return 0;
+}
+
+fs_initcall(pcibios_assign_resources);
+
+void __init pcibios_resource_survey(void)
+{
+ DBG("PCI: Allocating resources\n");
+ pcibios_allocate_bus_resources(&pci_root_buses);
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
+}
+
+int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+
+ for (idx = 0; idx < 6; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1 << idx)))
+ continue;
+
+ r = &dev->resource[idx];
+
+ if (!r->start && r->end) {
+ printk(KERN_ERR
+ "PCI: Device %s not available because of"
+ " resource collisions\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+
+ if (dev->resource[PCI_ROM_RESOURCE].start)
+ cmd |= PCI_COMMAND_MEMORY;
+
+ if (cmd != old_cmd)
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ return 0;
+}
+
+/*
+ * If we set up a device for bus mastering, we need to check the latency
+ * timer as certain crappy BIOSes forget to set it properly.
+ */
+unsigned int pcibios_max_latency = 255;
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+ u8 lat;
+
+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+ if (lat < 16)
+ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+ else if (lat > pcibios_max_latency)
+ lat = pcibios_max_latency;
+ else
+ return;
+
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ unsigned long prot;
+
+ /* Leave vm_pgoff as-is, the PCI space address is the physical
+ * address on this platform.
+ */
+ vma->vm_flags |= VM_LOCKED | VM_IO;
+
+ prot = pgprot_val(vma->vm_page_prot);
+ prot &= ~_PAGE_CACHE;
+ vma->vm_page_prot = __pgprot(prot);
+
+ /* Write-combine setting is ignored */
+ if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot))
+ return -EAGAIN;
+
+ return 0;
+}
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
new file mode 100644
index 0000000..84634fa
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.h
@@ -0,0 +1,82 @@
+/* ASB2305 Arch-specific PCI declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-i386.h: (c) 1999 Martin Mares <mj@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _PCI_ASB2305_H
+#define _PCI_ASB2305_H
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS 1
+#define PCI_PROBE_CONF1 2
+#define PCI_PROBE_CONF2 4
+#define PCI_NO_SORT 0x100
+#define PCI_BIOS_SORT 0x200
+#define PCI_NO_CHECKS 0x400
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+
+extern unsigned int pci_probe;
+
+/* pci-asb2305.c */
+
+extern unsigned int pcibios_max_latency;
+
+extern void pcibios_resource_survey(void);
+extern int pcibios_enable_resources(struct pci_dev *dev, int mask);
+
+/* pci.c */
+
+extern int pcibios_last_bus;
+extern struct pci_bus *pci_root_bus;
+extern struct pci_ops *pci_root_ops;
+
+extern struct irq_routing_table *pcibios_get_irq_routing_table(void);
+extern int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+/* pci-irq.c */
+
+struct irq_info {
+ u8 bus, devfn; /* Bus, device and function */
+ struct {
+ u8 link; /* IRQ line ID, chipset dependent,
+ * 0=not routed */
+ u16 bitmap; /* Available IRQs */
+ } __attribute__((packed)) irq[4];
+ u8 slot; /* Slot number, 0=onboard */
+ u8 rfu;
+} __attribute__((packed));
+
+struct irq_routing_table {
+ u32 signature; /* PIRQ_SIGNATURE should be here */
+ u16 version; /* PIRQ_VERSION */
+ u16 size; /* Table size in bytes */
+ u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
+ u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
+ u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
+ u32 miniport_data; /* Crap */
+ u8 rfu[11];
+ u8 checksum; /* Modulo 256 checksum must give zero */
+ struct irq_info slots[0];
+} __attribute__((packed));
+
+extern unsigned int pcibios_irq_mask;
+
+extern void pcibios_irq_init(void);
+extern void pcibios_fixup_irqs(void);
+extern void pcibios_enable_irq(struct pci_dev *dev);
+
+#endif /* PCI_ASB2305_H */
diff --git a/arch/mn10300/unit-asb2305/pci-iomap.c b/arch/mn10300/unit-asb2305/pci-iomap.c
new file mode 100644
index 0000000..dbceae4
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-iomap.c
@@ -0,0 +1,31 @@
+/* ASB2305 PCI I/O mapping handler
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/pci.h>
+#include <linux/module.h>
+
+/*
+ * Create a virtual mapping cookie for a PCI BAR (memory or IO)
+ */
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+ unsigned long start = pci_resource_start(dev, bar);
+ unsigned long len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (!len || !start)
+ return NULL;
+
+ if ((flags & IORESOURCE_IO) || (flags & IORESOURCE_MEM))
+ return (void __iomem *) start;
+
+ return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c
new file mode 100644
index 0000000..58cfb44
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci-irq.c
@@ -0,0 +1,51 @@
+/* PCI IRQ routing on the MN103E010 based ASB2305
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * This is simple: All PCI interrupts route through the CPU's XIRQ1 pin [IRQ 35]
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include "pci-asb2305.h"
+
+void __init pcibios_irq_init(void)
+{
+}
+
+void __init pcibios_fixup_irqs(void)
+{
+ struct pci_dev *dev = NULL;
+ u8 line, pin;
+
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (pin) {
+ dev->irq = XIRQ1;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+ dev->irq);
+ }
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
+ }
+}
+
+void __init pcibios_penalize_isa_irq(int irq)
+{
+}
+
+void pcibios_enable_irq(struct pci_dev *dev)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+}
diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
new file mode 100644
index 0000000..1a86425
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/pci.c
@@ -0,0 +1,545 @@
+/* ASB2305 PCI support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from arch/i386/kernel/pci-pc.c
+ * (c) 1999--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include "pci-asb2305.h"
+
+unsigned int pci_probe = 1;
+
+int pcibios_last_bus = -1;
+struct pci_bus *pci_root_bus;
+struct pci_ops *pci_root_ops;
+
+/*
+ * Functions for accessing PCI configuration space
+ */
+
+#define CONFIG_CMD(bus, devfn, where) \
+ (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+#define MEM_PAGING_REG (*(volatile __u32 *) 0xBFFFFFF4)
+#define CONFIG_ADDRESS (*(volatile __u32 *) 0xBFFFFFF8)
+#define CONFIG_DATAL(X) (*(volatile __u32 *) 0xBFFFFFFC)
+#define CONFIG_DATAW(X) (*(volatile __u16 *) (0xBFFFFFFC + ((X) & 2)))
+#define CONFIG_DATAB(X) (*(volatile __u8 *) (0xBFFFFFFC + ((X) & 3)))
+
+#define BRIDGEREGB(X) (*(volatile __u8 *) (0xBE040000 + (X)))
+#define BRIDGEREGW(X) (*(volatile __u16 *) (0xBE040000 + (X)))
+#define BRIDGEREGL(X) (*(volatile __u32 *) (0xBE040000 + (X)))
+
+static inline int __query(const struct pci_bus *bus, unsigned int devfn)
+{
+#if 0
+ return bus->number == 0 && (devfn == PCI_DEVFN(0, 0));
+ return bus->number == 1;
+ return bus->number == 0 &&
+ (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0));
+#endif
+ return 1;
+}
+
+/*
+ * translate Linuxcentric addresses to PCI bus addresses
+ */
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res)
+{
+ if (res->flags & IORESOURCE_IO) {
+ region->start = (res->start & 0x00ffffff);
+ region->end = (res->end & 0x00ffffff);
+ }
+
+ if (res->flags & IORESOURCE_MEM) {
+ region->start = (res->start & 0x03ffffff) | MEM_PAGING_REG;
+ region->end = (res->end & 0x03ffffff) | MEM_PAGING_REG;
+ }
+
+#if 0
+ printk(KERN_DEBUG "RES->BUS: %lx-%lx => %lx-%lx\n",
+ res->start, res->end, region->start, region->end);
+#endif
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+/*
+ * translate PCI bus addresses to Linuxcentric addresses
+ */
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region)
+{
+ if (res->flags & IORESOURCE_IO) {
+ res->start = (region->start & 0x00ffffff) | 0xbe000000;
+ res->end = (region->end & 0x00ffffff) | 0xbe000000;
+ }
+
+ if (res->flags & IORESOURCE_MEM) {
+ res->start = (region->start & 0x03ffffff) | 0xb8000000;
+ res->end = (region->end & 0x03ffffff) | 0xb8000000;
+ }
+
+#if 0
+ printk(KERN_INFO "BUS->RES: %lx-%lx => %lx-%lx\n",
+ region->start, region->end, res->start, res->end);
+#endif
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+/*
+ *
+ */
+static int pci_ampci_read_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *_value)
+{
+ u32 rawval, value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ value = BRIDGEREGB(where);
+ __pcbdebug("=> %02hx", &BRIDGEREGL(where), value);
+ } else {
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ value = CONFIG_DATAB(where);
+ if (__query(bus, devfn))
+ __pcidebug("=> %02hx", bus, devfn, where, value);
+ }
+
+ *_value = value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *_value)
+{
+ u32 rawval, value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ value = BRIDGEREGW(where);
+ __pcbdebug("=> %04hx", &BRIDGEREGL(where), value);
+ } else {
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ value = CONFIG_DATAW(where);
+ if (__query(bus, devfn))
+ __pcidebug("=> %04hx", bus, devfn, where, value);
+ }
+
+ *_value = value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *_value)
+{
+ u32 rawval, value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ value = BRIDGEREGL(where);
+ __pcbdebug("=> %08x", &BRIDGEREGL(where), value);
+ } else {
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ value = CONFIG_DATAL(where);
+ if (__query(bus, devfn))
+ __pcidebug("=> %08x", bus, devfn, where, value);
+ }
+
+ *_value = value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 value)
+{
+ u32 rawval;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __pcbdebug("<= %02x", &BRIDGEREGB(where), value);
+ BRIDGEREGB(where) = value;
+ } else {
+ if (bus->number == 0 &&
+ (devfn == PCI_DEVFN(2, 0) && devfn == PCI_DEVFN(3, 0))
+ )
+ __pcidebug("<= %02x", bus, devfn, where, value);
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ CONFIG_DATAB(where) = value;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 value)
+{
+ u32 rawval;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __pcbdebug("<= %04hx", &BRIDGEREGW(where), value);
+ BRIDGEREGW(where) = value;
+ } else {
+ if (__query(bus, devfn))
+ __pcidebug("<= %04hx", bus, devfn, where, value);
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ CONFIG_DATAW(where) = value;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 value)
+{
+ u32 rawval;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __pcbdebug("<= %08x", &BRIDGEREGL(where), value);
+ BRIDGEREGL(where) = value;
+ } else {
+ if (__query(bus, devfn))
+ __pcidebug("<= %08x", bus, devfn, where, value);
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ CONFIG_DATAL(where) = value;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ switch (size) {
+ case 1:
+ return pci_ampci_read_config_byte(bus, devfn, where, val);
+ case 2:
+ return pci_ampci_read_config_word(bus, devfn, where, val);
+ case 4:
+ return pci_ampci_read_config_dword(bus, devfn, where, val);
+ default:
+ BUG();
+ return -EOPNOTSUPP;
+ }
+}
+
+static int pci_ampci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ switch (size) {
+ case 1:
+ return pci_ampci_write_config_byte(bus, devfn, where, val);
+ case 2:
+ return pci_ampci_write_config_word(bus, devfn, where, val);
+ case 4:
+ return pci_ampci_write_config_dword(bus, devfn, where, val);
+ default:
+ BUG();
+ return -EOPNOTSUPP;
+ }
+}
+
+static struct pci_ops pci_direct_ampci = {
+ pci_ampci_read_config,
+ pci_ampci_write_config,
+};
+
+/*
+ * Before we decide to use direct hardware access mechanisms, we try to do some
+ * trivial checks to ensure it at least _seems_ to be working -- we just test
+ * whether bus 00 contains a host bridge (this is similar to checking
+ * techniques used in XFree86, but ours should be more reliable since we
+ * attempt to make use of direct access hints provided by the PCI BIOS).
+ *
+ * This should be close to trivial, but it isn't, because there are buggy
+ * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
+ */
+static int __init pci_sanity_check(struct pci_ops *o)
+{
+ struct pci_bus bus; /* Fake bus and device */
+ u32 x;
+
+ bus.number = 0;
+
+ if ((!o->read(&bus, 0, PCI_CLASS_DEVICE, 2, &x) &&
+ (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)) ||
+ (!o->read(&bus, 0, PCI_VENDOR_ID, 2, &x) &&
+ (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)))
+ return 1;
+
+ printk(KERN_ERROR "PCI: Sanity check failed\n");
+ return 0;
+}
+
+static int __init pci_check_direct(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /*
+ * Check if access works.
+ */
+ if (pci_sanity_check(&pci_direct_ampci)) {
+ local_irq_restore(flags);
+ printk(KERN_INFO "PCI: Using configuration ampci\n");
+ request_mem_region(0xBE040000, 256, "AMPCI bridge");
+ request_mem_region(0xBFFFFFF4, 12, "PCI ampci");
+ return 0;
+ }
+
+ local_irq_restore(flags);
+ return -ENODEV;
+}
+
+static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
+{
+ unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
+ struct resource *devr = &dev->resource[idx];
+
+ if (dev->bus) {
+ for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+ struct resource *busr = dev->bus->resource[i];
+
+ if (!busr || (busr->flags ^ devr->flags) & type_mask)
+ continue;
+
+ if (devr->start &&
+ devr->start >= busr->start &&
+ devr->end <= busr->end)
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+ struct pci_bus_region region;
+ int i;
+ int limit;
+
+ if (dev->bus->number != 0)
+ return;
+
+ limit = (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) ?
+ PCI_BRIDGE_RESOURCES : PCI_NUM_RESOURCES;
+
+ for (i = 0; i < limit; i++) {
+ if (!dev->resource[i].flags)
+ continue;
+
+ region.start = dev->resource[i].start;
+ region.end = dev->resource[i].end;
+ pcibios_bus_to_resource(dev, &dev->resource[i], ®ion);
+ if (is_valid_resource(dev, i))
+ pci_claim_resource(dev, i);
+ }
+}
+
+/*
+ * Called after each bus is probed, but before its children
+ * are examined.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ if (bus->self) {
+ pci_read_bridge_bases(bus);
+ pcibios_fixup_device_resources(bus->self);
+ }
+
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ pcibios_fixup_device_resources(dev);
+}
+
+/*
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space, but we still keep BIOS order of cards to be
+ * compatible with 2.0.X. This should go away some day.
+ */
+static int __init pcibios_init(void)
+{
+ ioport_resource.start = 0xA0000000;
+ ioport_resource.end = 0xDFFFFFFF;
+ iomem_resource.start = 0xA0000000;
+ iomem_resource.end = 0xDFFFFFFF;
+
+ if (!pci_probe)
+ return 0;
+
+ if (pci_check_direct() < 0) {
+ printk(KERN_WARNING "PCI: No PCI bus detected\n");
+ return 0;
+ }
+
+ printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
+ MEM_PAGING_REG);
+
+ {
+#if 0
+ static struct pci_bus am33_root_bus = {
+ .children = LIST_HEAD_INIT(am33_root_bus.children),
+ .devices = LIST_HEAD_INIT(am33_root_bus.devices),
+ .number = 0,
+ .secondary = 0,
+ .resource = { &ioport_resource, &iomem_resource },
+ };
+
+ am33_root_bus.ops = pci_root_ops;
+ list_add_tail(&am33_root_bus.node, &pci_root_buses);
+
+ am33_root_bus.subordinate = pci_do_scan_bus(0);
+
+ pci_root_bus = &am33_root_bus;
+#else
+ pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL);
+#endif
+ }
+
+ pcibios_irq_init();
+ pcibios_fixup_irqs();
+#if 0
+ pcibios_resource_survey();
+#endif
+ return 0;
+}
+
+arch_initcall(pcibios_init);
+
+char *__init pcibios_setup(char *str)
+{
+ if (!strcmp(str, "off")) {
+ pci_probe = 0;
+ return NULL;
+
+ } else if (!strncmp(str, "lastbus=", 8)) {
+ pcibios_last_bus = simple_strtol(str+8, NULL, 0);
+ return NULL;
+ }
+
+ return str;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ int err;
+
+ err = pcibios_enable_resources(dev, mask);
+ if (err == 0)
+ pcibios_enable_irq(dev);
+ return err;
+}
+
+/*
+ * disable the ethernet chipset
+ */
+static void __init unit_disable_pcnet(struct pci_bus *bus, struct pci_ops *o)
+{
+ u32 x;
+
+ bus->number = 0;
+
+ o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x);
+ x |= PCI_COMMAND_MASTER |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+ o->write(bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, x);
+ o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x);
+ o->write(bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0, 4, 0x00030001);
+ o->read (bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0, 4, &x);
+
+#define RDP (*(volatile u32 *) 0xBE030010)
+#define RAP (*(volatile u32 *) 0xBE030014)
+#define __set_RAP(X) do { RAP = (X); x = RAP; } while (0)
+#define __set_RDP(X) do { RDP = (X); x = RDP; } while (0)
+#define __get_RDP() ({ RDP & 0xffff; })
+
+ __set_RAP(0);
+ __set_RDP(0x0004); /* CSR0 = STOP */
+
+ __set_RAP(88); /* check CSR88 indicates an Am79C973 */
+ BUG_ON(__get_RDP() != 0x5003);
+
+ for (x = 0; x < 100; x++)
+ asm volatile("nop");
+
+ __set_RDP(0x0004); /* CSR0 = STOP */
+}
+
+/*
+ * initialise the unit hardware
+ */
+asmlinkage void __init unit_pci_init(void)
+{
+ struct pci_bus bus; /* Fake bus and device */
+ struct pci_ops *o = &pci_direct_ampci;
+ u32 x;
+
+ set_intr_level(XIRQ1, GxICR_LEVEL_3);
+
+ memset(&bus, 0, sizeof(bus));
+
+ MEM_PAGING_REG = 0xE8000000;
+
+ /* we need to set up the bridge _now_ or we won't be able to access the
+ * PCI config registers
+ */
+ BRIDGEREGW(PCI_COMMAND) |=
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO | PCI_COMMAND_MASTER;
+ BRIDGEREGW(PCI_STATUS) = 0xF800;
+ BRIDGEREGB(PCI_LATENCY_TIMER) = 0x10;
+ BRIDGEREGL(PCI_BASE_ADDRESS_0) = 0x80000000;
+ BRIDGEREGB(PCI_INTERRUPT_LINE) = 1;
+ BRIDGEREGL(0x48) = 0x98000000; /* AMPCI base addr */
+ BRIDGEREGB(0x41) = 0x00; /* secondary bus
+ * number */
+ BRIDGEREGB(0x42) = 0x01; /* subordinate bus
+ * number */
+ BRIDGEREGB(0x44) = 0x01;
+ BRIDGEREGL(0x50) = 0x00000001;
+ BRIDGEREGL(0x58) = 0x00001002;
+ BRIDGEREGL(0x5C) = 0x00000011;
+
+ /* we also need to set up the PCI-PCI bridge */
+ bus.number = 0;
+
+ /* IO: 0x00000000-0x00020000 */
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_COMMAND, 2, &x);
+ x |= PCI_COMMAND_MASTER |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_COMMAND, 2, x);
+
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, &x);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, &x);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, &x);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, &x);
+
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, 0x01);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, &x);
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, 0x00020000);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, &x);
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, 0xEBB0EA00);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, &x);
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, 0xE9F0E800);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, &x);
+
+ unit_disable_pcnet(&bus, o);
+}
diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c
new file mode 100644
index 0000000..6a35241
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/unit-init.c
@@ -0,0 +1,61 @@
+/* ASB2305 Initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/cpu/intctl-regs.h>
+#include <asm/cpu/rtc-regs.h>
+#include <asm/cpu/serial-regs.h>
+#include <asm/unit/serial.h>
+
+/*
+ * initialise some of the unit hardware before gdbstub is set up
+ */
+asmlinkage void __init unit_init(void)
+{
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+ /* set the 16550 interrupt line to level 3 if not being used for GDB */
+ set_intr_level(XIRQ0, GxICR_LEVEL_3);
+#endif
+}
+
+/*
+ * initialise the rest of the unit hardware after gdbstub is ready
+ */
+void __init unit_setup(void)
+{
+#ifdef CONFIG_PCI
+ unit_pci_init();
+#endif
+}
+
+/*
+ * initialise the external interrupts used by a unit of this type
+ */
+void __init unit_init_IRQ(void)
+{
+ unsigned int extnum;
+
+ for (extnum = 0; extnum < NR_XIRQS; extnum++) {
+ switch (GET_XIRQ_TRIGGER(extnum)) {
+ case XIRQ_TRIGGER_HILEVEL:
+ case XIRQ_TRIGGER_LOWLEVEL:
+ set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+ break;
+ default:
+ break;
+ }
+ }
+}
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 028d8a0..d929ac8 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -75,6 +75,9 @@
bool
default y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
# unless you want to implement ACPI on PA-RISC ... ;-)
config PM
bool
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index c44b8c5..39e7c5a 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -190,7 +190,7 @@
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index f80f90c..ac3390f 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -107,19 +107,20 @@
return pte;
}
-struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *ptepage;
#ifdef CONFIG_HIGHPTE
- gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+ gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT | __GFP_ZERO;
#else
- gfp_t flags = GFP_KERNEL | __GFP_REPEAT;
+ gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO;
#endif
ptepage = alloc_pages(flags, 0);
- if (ptepage)
- clear_highpage(ptepage);
+ if (!ptepage)
+ return NULL;
+ pgtable_page_ctor(ptepage);
return ptepage;
}
@@ -131,11 +132,12 @@
free_page((unsigned long)pte);
}
-void pte_free(struct mm_struct *mm, struct page *ptepage)
+void pte_free(struct mm_struct *mm, pgtable_t ptepage)
{
#ifdef CONFIG_SMP
hash_page_sync();
#endif
+ pgtable_page_dtor(ptepage);
__free_page(ptepage);
}
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 1018acd..e393144 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -460,7 +460,7 @@
if (!i->i_openers++)
ctx->cntl = inode->i_mapping;
mutex_unlock(&ctx->mapping_lock);
- return spufs_attr_open(inode, file, spufs_cntl_get,
+ return simple_attr_open(inode, file, spufs_cntl_get,
spufs_cntl_set, "0x%08lx");
}
@@ -470,7 +470,7 @@
struct spufs_inode_info *i = SPUFS_I(inode);
struct spu_context *ctx = i->i_ctx;
- spufs_attr_release(inode, file);
+ simple_attr_release(inode, file);
mutex_lock(&ctx->mapping_lock);
if (!--i->i_openers)
@@ -482,8 +482,8 @@
static const struct file_operations spufs_cntl_fops = {
.open = spufs_cntl_open,
.release = spufs_cntl_release,
- .read = spufs_attr_read,
- .write = spufs_attr_write,
+ .read = simple_attr_read,
+ .write = simple_attr_write,
.mmap = spufs_cntl_mmap,
};
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 90784c0..e6e6559 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -755,8 +755,11 @@
.statfs = simple_statfs,
.delete_inode = spufs_delete_inode,
.drop_inode = generic_delete_inode,
+ .show_options = generic_show_options,
};
+ save_mount_options(sb, data);
+
sb->s_maxbytes = MAX_LFS_FILESIZE;
sb->s_blocksize = PAGE_CACHE_SIZE;
sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index d51368d..2940559 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -275,7 +275,7 @@
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start =c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
index 409fcaa..03a79bf 100644
--- a/arch/ppc/mm/pgtable.c
+++ b/arch/ppc/mm/pgtable.c
@@ -95,7 +95,7 @@
return pte;
}
-struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *ptepage;
@@ -106,8 +106,10 @@
#endif
ptepage = alloc_pages(flags, 0);
- if (ptepage)
+ if (ptepage) {
clear_highpage(ptepage);
+ pgtable_page_ctor(ptepage);
+ }
return ptepage;
}
@@ -119,11 +121,12 @@
free_page((unsigned long)pte);
}
-void pte_free(struct mm_struct *mm, struct page *ptepage)
+void pte_free(struct mm_struct *mm, pgtable_t ptepage)
{
#ifdef CONFIG_SMP
hash_page_sync();
#endif
+ pgtable_page_dtor(ptepage);
__free_page(ptepage);
}
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 1a2fdb69..a4d2902 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -24,6 +24,7 @@
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/seq_file.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kdebug.h>
@@ -218,41 +219,40 @@
}
/* This is called from fs/proc/array.c */
-char *task_show_regs(struct task_struct *task, char *buffer)
+void task_show_regs(struct seq_file *m, struct task_struct *task)
{
struct pt_regs *regs;
regs = task_pt_regs(task);
- buffer += sprintf(buffer, "task: %p, ksp: %p\n",
+ seq_printf(m, "task: %p, ksp: %p\n",
task, (void *)task->thread.ksp);
- buffer += sprintf(buffer, "User PSW : %p %p\n",
+ seq_printf(m, "User PSW : %p %p\n",
(void *) regs->psw.mask, (void *)regs->psw.addr);
- buffer += sprintf(buffer, "User GPRS: " FOURLONG,
+ seq_printf(m, "User GPRS: " FOURLONG,
regs->gprs[0], regs->gprs[1],
regs->gprs[2], regs->gprs[3]);
- buffer += sprintf(buffer, " " FOURLONG,
+ seq_printf(m, " " FOURLONG,
regs->gprs[4], regs->gprs[5],
regs->gprs[6], regs->gprs[7]);
- buffer += sprintf(buffer, " " FOURLONG,
+ seq_printf(m, " " FOURLONG,
regs->gprs[8], regs->gprs[9],
regs->gprs[10], regs->gprs[11]);
- buffer += sprintf(buffer, " " FOURLONG,
+ seq_printf(m, " " FOURLONG,
regs->gprs[12], regs->gprs[13],
regs->gprs[14], regs->gprs[15]);
- buffer += sprintf(buffer, "User ACRS: %08x %08x %08x %08x\n",
+ seq_printf(m, "User ACRS: %08x %08x %08x %08x\n",
task->thread.acrs[0], task->thread.acrs[1],
task->thread.acrs[2], task->thread.acrs[3]);
- buffer += sprintf(buffer, " %08x %08x %08x %08x\n",
+ seq_printf(m, " %08x %08x %08x %08x\n",
task->thread.acrs[4], task->thread.acrs[5],
task->thread.acrs[6], task->thread.acrs[7]);
- buffer += sprintf(buffer, " %08x %08x %08x %08x\n",
+ seq_printf(m, " %08x %08x %08x %08x\n",
task->thread.acrs[8], task->thread.acrs[9],
task->thread.acrs[10], task->thread.acrs[11]);
- buffer += sprintf(buffer, " %08x %08x %08x %08x\n",
+ seq_printf(m, " %08x %08x %08x %08x\n",
task->thread.acrs[12], task->thread.acrs[13],
task->thread.acrs[14], task->thread.acrs[15]);
- return buffer;
}
static DEFINE_SPINLOCK(die_lock);
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index e60e0ae..019f518 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -78,6 +78,7 @@
clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
page->index = (addr_t) table;
}
+ pgtable_page_ctor(page);
table = (unsigned long *) page_to_phys(page);
clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
return table;
@@ -87,6 +88,7 @@
{
unsigned long *shadow = get_shadow_pte(table);
+ pgtable_page_dtor(virt_to_page(table));
if (shadow)
free_page((unsigned long) shadow);
free_page((unsigned long) table);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1c3a908..6e035d1 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -89,6 +89,9 @@
config ARCH_NO_VIRT_TO_BUS
def_bool y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
source "init/Kconfig"
menu "System type"
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 3008c00..8250e01 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -263,7 +263,7 @@
ssize_t (*store)(const char *buf, size_t count);
};
-#define to_sq_sysfs_attr(attr) container_of(attr, struct sq_sysfs_attr, attr)
+#define to_sq_sysfs_attr(a) container_of(a, struct sq_sysfs_attr, attr)
static ssize_t sq_sysfs_show(struct kobject *kobj, struct attribute *attr,
char *buf)
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 99f8971..7c674a3 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -27,6 +27,13 @@
config OF
def_bool y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
+config HZ
+ int
+ default 100
+
source "init/Kconfig"
menu "General machine setup"
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index 77460e3..19186ce 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -20,7 +20,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/smp.h>
#include <linux/reboot.h>
#include <linux/delay.h>
@@ -567,38 +566,6 @@
}
/*
- * fill in the user structure for a core dump..
- */
-void dump_thread(struct pt_regs * regs, struct user * dump)
-{
- unsigned long first_stack_page;
-
- dump->magic = SUNOS_CORE_MAGIC;
- dump->len = sizeof(struct user);
- dump->regs.psr = regs->psr;
- dump->regs.pc = regs->pc;
- dump->regs.npc = regs->npc;
- dump->regs.y = regs->y;
- /* fuck me plenty */
- memcpy(&dump->regs.regs[0], ®s->u_regs[1], (sizeof(unsigned long) * 15));
- dump->uexec = current->thread.core_exec;
- dump->u_tsize = (((unsigned long) current->mm->end_code) -
- ((unsigned long) current->mm->start_code)) & ~(PAGE_SIZE - 1);
- dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1)));
- dump->u_dsize -= dump->u_tsize;
- dump->u_dsize &= ~(PAGE_SIZE - 1);
- first_stack_page = (regs->u_regs[UREG_FP] & ~(PAGE_SIZE - 1));
- dump->u_ssize = (TASK_SIZE - first_stack_page) & ~(PAGE_SIZE - 1);
- memcpy(&dump->fpu.fpstatus.fregs.regs[0], ¤t->thread.float_regs[0], (sizeof(unsigned long) * 32));
- dump->fpu.fpstatus.fsr = current->thread.fsr;
- dump->fpu.fpstatus.flags = dump->fpu.fpstatus.extra = 0;
- dump->fpu.fpstatus.fpq_count = current->thread.fpqdepth;
- memcpy(&dump->fpu.fpstatus.fpq[0], ¤t->thread.fpqueue[0],
- ((sizeof(unsigned long) * 2) * 16));
- dump->sigcode = 0;
-}
-
-/*
* fill in the fpu structure for a core dump.
*/
int dump_fpu (struct pt_regs * regs, elf_fpregset_t * fpregs)
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index d07bc74..3cf78f1 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -16,7 +16,6 @@
#include <linux/initrd.h>
#include <asm/smp.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/screen_info.h>
#include <linux/delay.h>
#include <linux/fs.h>
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index ef647ac..c1025e5 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -51,7 +51,6 @@
#ifdef CONFIG_PCI
#include <asm/ebus.h>
#endif
-#include <asm/a.out.h>
#include <asm/io-unit.h>
#include <asm/bug.h>
@@ -214,8 +213,6 @@
EXPORT_SYMBOL(svr4_setcontext);
EXPORT_SYMBOL(svr4_getcontext);
-EXPORT_SYMBOL(dump_thread);
-
/* prom symbols */
EXPORT_SYMBOL(idprom);
EXPORT_SYMBOL(prom_root_node);
diff --git a/arch/sparc/mm/loadmmu.c b/arch/sparc/mm/loadmmu.c
index 36b4d24..2d9cd65 100644
--- a/arch/sparc/mm/loadmmu.c
+++ b/arch/sparc/mm/loadmmu.c
@@ -14,7 +14,6 @@
#include <asm/system.h>
#include <asm/page.h>
#include <asm/pgtable.h>
-#include <asm/a.out.h>
#include <asm/mmu_context.h>
#include <asm/oplib.h>
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 17b485f..23d3291 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -34,7 +34,6 @@
#include <asm/sbus.h>
#include <asm/asi.h>
#include <asm/msi.h>
-#include <asm/a.out.h>
#include <asm/mmu_context.h>
#include <asm/io-unit.h>
#include <asm/cacheflush.h>
@@ -490,14 +489,17 @@
return (pte_t *)srmmu_get_nocache(PTE_SIZE, PTE_SIZE);
}
-static struct page *
+static pgtable_t
srmmu_pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
unsigned long pte;
+ struct page *page;
if ((pte = (unsigned long)srmmu_pte_alloc_one_kernel(mm, address)) == 0)
return NULL;
- return pfn_to_page( __nocache_pa(pte) >> PAGE_SHIFT );
+ page = pfn_to_page( __nocache_pa(pte) >> PAGE_SHIFT );
+ pgtable_page_ctor(page);
+ return page;
}
static void srmmu_free_pte_fast(pte_t *pte)
@@ -505,10 +507,11 @@
srmmu_free_nocache((unsigned long)pte, PTE_SIZE);
}
-static void srmmu_pte_free(struct page *pte)
+static void srmmu_pte_free(pgtable_t pte)
{
unsigned long p;
+ pgtable_page_dtor(pte);
p = (unsigned long)page_address(pte); /* Cached address (for test) */
if (p == 0)
BUG();
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index 0729305..c0442e8 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -1947,12 +1947,17 @@
return pte;
}
-static struct page *sun4c_pte_alloc_one(struct mm_struct *mm, unsigned long address)
+static pgtable_t sun4c_pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
- pte_t *pte = sun4c_pte_alloc_one_kernel(mm, address);
+ pte_t *pte;
+ struct page *page;
+
+ pte = sun4c_pte_alloc_one_kernel(mm, address);
if (pte == NULL)
return NULL;
- return virt_to_page(pte);
+ page = virt_to_page(pte);
+ pgtable_page_ctor(page);
+ return page;
}
static inline void sun4c_free_pte_fast(pte_t *pte)
@@ -1962,8 +1967,9 @@
pgtable_cache_size++;
}
-static void sun4c_pte_free(struct page *pte)
+static void sun4c_pte_free(pgtable_t pte)
{
+ pgtable_page_dtor(pte);
sun4c_free_pte_fast(page_address(pte));
}
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index a8c6366..5023b81 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -81,6 +81,9 @@
bool
def_bool y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
choice
prompt "Kernel page size"
default SPARC64_PAGE_SIZE_8KB
@@ -390,7 +393,7 @@
config BINFMT_AOUT32
bool "Kernel support for 32-bit (ie. SunOS) a.out binaries"
- depends on SPARC32_COMPAT
+ depends on SPARC32_COMPAT && ARCH_SUPPORTS_AOUT
help
This allows you to run 32-bit a.out format binaries on your Ultra.
If you want to run SunOS binaries (see SunOS binary emulation below)
diff --git a/arch/sparc64/kernel/binfmt_aout32.c b/arch/sparc64/kernel/binfmt_aout32.c
index 92c1b36..9877f2d 100644
--- a/arch/sparc64/kernel/binfmt_aout32.c
+++ b/arch/sparc64/kernel/binfmt_aout32.c
@@ -32,6 +32,7 @@
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
+#include <asm/a.out-core.h>
static int load_aout32_binary(struct linux_binprm *, struct pt_regs * regs);
static int load_aout32_library(struct file*);
@@ -101,7 +102,7 @@
current->flags |= PF_DUMPCORE;
strncpy(dump.u_comm, current->comm, sizeof(dump.u_comm));
dump.signal = signr;
- dump_thread(regs, &dump);
+ aout_dump_thread(regs, &dump);
/* If the size of the dump file exceeds the rlimit, then see what would happen
if we wrote the stack, but not the data area. */
diff --git a/arch/sparc64/kernel/binfmt_elf32.c b/arch/sparc64/kernel/binfmt_elf32.c
index d141300..a0718dc 100644
--- a/arch/sparc64/kernel/binfmt_elf32.c
+++ b/arch/sparc64/kernel/binfmt_elf32.c
@@ -128,8 +128,6 @@
#undef MODULE_DESCRIPTION
#undef MODULE_AUTHOR
-#include <asm/a.out.h>
-
#undef TASK_SIZE
#define TASK_SIZE STACK_TOP32
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index 30431bd..5ec06c8 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -522,7 +522,7 @@
.set_affinity = sun4v_virt_set_affinity,
};
-static void fastcall pre_flow_handler(unsigned int virt_irq,
+static void pre_flow_handler(unsigned int virt_irq,
struct irq_desc *desc)
{
struct irq_handler_data *data = get_irq_chip_data(virt_irq);
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index ca7cdfd..1b23791 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -24,7 +24,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/compat.h>
@@ -725,17 +724,6 @@
return retval;
}
-/*
- * fill in the user structure for a core dump..
- */
-void dump_thread(struct pt_regs * regs, struct user * dump)
-{
- /* Only should be used for SunOS and ancient a.out
- * SparcLinux binaries... Not worth implementing.
- */
- memset(dump, 0, sizeof(struct user));
-}
-
typedef struct {
union {
unsigned int pr_regs[32];
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index a813441..5964d86 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -15,7 +15,6 @@
#include <linux/slab.h>
#include <asm/smp.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/screen_info.h>
#include <linux/delay.h>
#include <linux/fs.h>
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 8649635..68db089 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -53,7 +53,6 @@
#include <asm/ebus.h>
#include <asm/isa.h>
#endif
-#include <asm/a.out.h>
#include <asm/ns87303.h>
#include <asm/timer.h>
#include <asm/cpudata.h>
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index c56573a..134d801 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -28,7 +28,6 @@
#include <asm/uaccess.h>
#include <asm/utrap.h>
#include <asm/perfctr.h>
-#include <asm/a.out.h>
#include <asm/unistd.h>
/* #define DEBUG_UNIMP_SYSCALL */
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 98c4688..deaba2b 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -57,7 +57,6 @@
#include <asm/fpumacro.h>
#include <asm/semaphore.h>
#include <asm/mmu_context.h>
-#include <asm/a.out.h>
#include <asm/compat_signal.h>
asmlinkage long sys32_chown16(const char __user * filename, u16 user, u16 group)
diff --git a/arch/sparc64/solaris/misc.c b/arch/sparc64/solaris/misc.c
index c86cb30..d3e48e9 100644
--- a/arch/sparc64/solaris/misc.c
+++ b/arch/sparc64/solaris/misc.c
@@ -415,7 +415,7 @@
switch (cmd) {
case 0: /* getpgrp */
- return task_pgrp_nr(current);
+ return task_pgrp_vnr(current);
case 1: /* setpgrp */
{
int (*sys_setpgid)(pid_t,pid_t) =
@@ -426,7 +426,7 @@
ret = sys_setpgid(0, 0);
if (ret) return ret;
proc_clear_tty(current);
- return task_pgrp_nr(current);
+ return task_pgrp_vnr(current);
}
case 2: /* getsid */
{
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 99e51d0..dba8e05 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -203,17 +203,6 @@
depends on SMP
default "32"
-config NEST_LEVEL
- int "Nesting level"
- default "0"
- help
- This is set to the number of layers of UMLs that this UML will be run
- in. Normally, this is zero, meaning that it will run directly on the
- host. Setting it to one will build a UML that can run inside a UML
- that is running on the host. Generally, if you intend this UML to run
- inside another UML, set CONFIG_NEST_LEVEL to one more than the host
- UML.
-
config HIGHMEM
bool "Highmem support (EXPERIMENTAL)"
depends on !64BIT && EXPERIMENTAL
diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386
index 717f5d3..3cd8a04 100644
--- a/arch/um/Kconfig.i386
+++ b/arch/um/Kconfig.i386
@@ -23,43 +23,6 @@
bool
default y
-choice
- prompt "Host memory split"
- default HOST_VMSPLIT_3G
- help
- This is needed when the host kernel on which you run has a non-default
- (like 2G/2G) memory split, instead of the customary 3G/1G. If you did
- not recompile your own kernel but use the default distro's one, you can
- safely accept the "Default split" option.
-
- It can be enabled on recent (>=2.6.16-rc2) vanilla kernels via
- CONFIG_VM_SPLIT_*, or on previous kernels with special patches (-ck
- patchset by Con Kolivas, or other ones) - option names match closely the
- host CONFIG_VM_SPLIT_* ones.
-
- A lower setting (where 1G/3G is lowest and 3G/1G is higher) will
- tolerate even more "normal" host kernels, but an higher setting will be
- stricter.
-
- So, if you do not know what to do here, say 'Default split'.
-
-config HOST_VMSPLIT_3G
- bool "Default split (3G/1G user/kernel host split)"
-config HOST_VMSPLIT_3G_OPT
- bool "3G/1G user/kernel host split (for full 1G low memory)"
-config HOST_VMSPLIT_2G
- bool "2G/2G user/kernel host split"
-config HOST_VMSPLIT_1G
- bool "1G/3G user/kernel host split"
-endchoice
-
-config TOP_ADDR
- hex
- default 0xB0000000 if HOST_VMSPLIT_3G_OPT
- default 0x78000000 if HOST_VMSPLIT_2G
- default 0x40000000 if HOST_VMSPLIT_1G
- default 0xC0000000
-
config 3_LEVEL_PGTABLES
bool "Three-level pagetables (EXPERIMENTAL)"
default n
@@ -84,3 +47,5 @@
bool
default y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64
index d632e9a..6533b34 100644
--- a/arch/um/Kconfig.x86_64
+++ b/arch/um/Kconfig.x86_64
@@ -15,10 +15,6 @@
bool
default y
-config TOP_ADDR
- hex
- default 0x7fc0000000
-
config 3_LEVEL_PGTABLES
bool
default y
@@ -39,3 +35,5 @@
bool
default y
+config ARCH_SUPPORTS_AOUT
+ def_bool y
diff --git a/arch/um/Makefile b/arch/um/Makefile
index cb4af9b..dbeab15 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -79,13 +79,6 @@
KBUILD_CFLAGS += $(KERNEL_DEFINES)
KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time,)
-# These are needed for clean and mrproper, since in that case .config is not
-# included; the values here are meaningless
-
-CONFIG_NEST_LEVEL ?= 0
-
-SIZE = ($(CONFIG_NEST_LEVEL) * 0x20000000)
-
PHONY += linux
all: linux
@@ -120,10 +113,6 @@
CONFIG_KERNEL_STACK_ORDER ?= 2
STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] )
-ifndef START
- START = $(shell echo $$[ $(TOP_ADDR) - $(SIZE) ] )
-endif
-
CPPFLAGS_vmlinux.lds = -U$(SUBARCH) -DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \
-DELF_FORMAT="$(ELF_FORMAT)" -DKERNEL_STACK_SIZE=$(STACK_SIZE)
diff --git a/arch/um/defconfig b/arch/um/defconfig
index 86db286..59215bc 100644
--- a/arch/um/defconfig
+++ b/arch/um/defconfig
@@ -56,8 +56,6 @@
CONFIG_UML_X86=y
# CONFIG_64BIT is not set
CONFIG_SEMAPHORE_SLEEPERS=y
-# CONFIG_HOST_2G_2G is not set
-CONFIG_TOP_ADDR=0xc0000000
# CONFIG_3_LEVEL_PGTABLES is not set
CONFIG_ARCH_HAS_SC_SIGNALS=y
CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA=y
@@ -81,7 +79,6 @@
# CONFIG_HPPFS is not set
CONFIG_MCONSOLE=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_NEST_LEVEL=0
# CONFIG_HIGHMEM is not set
CONFIG_KERNEL_STACK_ORDER=0
diff --git a/arch/um/include/as-layout.h b/arch/um/include/as-layout.h
index 606bb5c..cac542d 100644
--- a/arch/um/include/as-layout.h
+++ b/arch/um/include/as-layout.h
@@ -57,6 +57,8 @@
extern unsigned long _unprotected_end;
extern unsigned long brk_start;
+extern unsigned long host_task_size;
+
extern int linux_main(int argc, char **argv);
extern void (*sig_info[])(int, struct uml_pt_regs *);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 0b6b627..32c799e 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -295,6 +295,9 @@
extern int os_arch_prctl(int pid, int code, unsigned long *addr);
/* tty.c */
-int get_pty(void);
+extern int get_pty(void);
+
+/* sys-$ARCH/task_size.c */
+extern unsigned long os_get_task_size(void);
#endif
diff --git a/arch/um/include/tempfile.h b/arch/um/include/tempfile.h
deleted file mode 100644
index d441eac..0000000
--- a/arch/um/include/tempfile.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __TEMPFILE_H__
-#define __TEMPFILE_H__
-
-extern int make_tempfile(const char *template, char **tempname, int do_unlink);
-
-#endif
diff --git a/arch/um/include/um_mmu.h b/arch/um/include/um_mmu.h
index 82865fc..f575ff9 100644
--- a/arch/um/include/um_mmu.h
+++ b/arch/um/include/um_mmu.h
@@ -13,6 +13,7 @@
typedef struct mm_context {
struct mm_id id;
struct uml_ldt ldt;
+ struct page **stub_pages;
} mm_context_t;
extern void __switch_mm(struct mm_id * mm_idp);
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 76a62c0..f5d7f45 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -25,7 +25,7 @@
ret = unmap(¤t->mm->context.id, 0, STUB_START, 0, &data);
ret = ret || unmap(¤t->mm->context.id, STUB_END,
- TASK_SIZE - STUB_END, 1, &data);
+ host_task_size - STUB_END, 1, &data);
if (ret) {
printk(KERN_ERR "flush_thread - clearing address space failed, "
"err = %d\n", ret);
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index 5311ee9..66e2a30 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -5,7 +5,6 @@
#include "linux/module.h"
#include "linux/syscalls.h"
-#include "asm/a.out.h"
#include "asm/tlbflush.h"
#include "asm/uaccess.h"
#include "as-layout.h"
@@ -60,7 +59,6 @@
EXPORT_SYMBOL(os_rcv_fd);
EXPORT_SYMBOL(run_helper);
EXPORT_SYMBOL(start_thread);
-EXPORT_SYMBOL(dump_thread);
#ifdef CONFIG_SMP
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index d872fdc..2627ce8 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -354,11 +354,13 @@
return pte;
}
-struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *pte;
pte = alloc_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ if (pte)
+ pgtable_page_ctor(pte);
return pte;
}
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index c07961b..fc50d2f 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -258,10 +258,6 @@
default_idle();
}
-void dump_thread(struct pt_regs *regs, struct user *u)
-{
-}
-
int __cant_sleep(void) {
return in_atomic() || irqs_disabled() || in_interrupt();
/* Is in_interrupt() really needed? */
diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c
index 78b3e9f..0cd9a7a 100644
--- a/arch/um/kernel/skas/mmu.c
+++ b/arch/um/kernel/skas/mmu.c
@@ -91,6 +91,8 @@
goto out_free;
}
+ to_mm->stub_pages = NULL;
+
return 0;
out_free:
@@ -126,6 +128,7 @@
pages[0] = virt_to_page(&__syscall_stub_start);
pages[1] = virt_to_page(mm->context.id.stack);
+ mm->context.stub_pages = pages;
/* dup_mmap already holds mmap_sem */
err = install_special_mapping(mm, STUB_START, STUB_END - STUB_START,
@@ -147,6 +150,8 @@
{
pte_t *pte;
+ if (mm->context.stub_pages != NULL)
+ kfree(mm->context.stub_pages);
pte = virt_to_pte(mm, STUB_CODE);
if (pte != NULL)
pte_clear(mm, STUB_CODE, pte);
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 468aba9..a6c1dd1 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -241,6 +241,11 @@
};
/* Set during early boot */
+unsigned long task_size;
+EXPORT_SYMBOL(task_size);
+
+unsigned long host_task_size;
+
unsigned long brk_start;
unsigned long end_iomem;
EXPORT_SYMBOL(end_iomem);
@@ -267,6 +272,13 @@
if (have_root == 0)
add_arg(DEFAULT_COMMAND_LINE);
+ host_task_size = os_get_task_size();
+ /*
+ * TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps
+ * out
+ */
+ task_size = host_task_size & PGDIR_MASK;
+
/* OS sanity checks that need to happen before the kernel runs */
os_early_checks();
@@ -303,7 +315,7 @@
highmem = 0;
iomem_size = (iomem_size + PAGE_SIZE - 1) & PAGE_MASK;
- max_physmem = CONFIG_TOP_ADDR - uml_physmem - iomem_size - MIN_VMALLOC;
+ max_physmem = TASK_SIZE - uml_physmem - iomem_size - MIN_VMALLOC;
/*
* Zones have to begin on a 1 << MAX_ORDER page boundary,
@@ -335,7 +347,7 @@
}
virtmem_size = physmem_size;
- avail = CONFIG_TOP_ADDR - start_vm;
+ avail = TASK_SIZE - start_vm;
if (physmem_size > avail)
virtmem_size = avail;
end_vm = start_vm + virtmem_size;
diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c
index b8d8c9c..57e3d46 100644
--- a/arch/um/os-Linux/aio.c
+++ b/arch/um/os-Linux/aio.c
@@ -142,7 +142,7 @@
if (actual != req->offset)
return -errno;
- switch(req->type) {
+ switch (req->type) {
case AIO_READ:
n = read(req->io_fd, req->buf, req->len);
break;
diff --git a/arch/um/os-Linux/drivers/ethertap_kern.c b/arch/um/os-Linux/drivers/ethertap_kern.c
index 04f11b9..046a131 100644
--- a/arch/um/os-Linux/drivers/ethertap_kern.c
+++ b/arch/um/os-Linux/drivers/ethertap_kern.c
@@ -6,7 +6,7 @@
* Licensed under the GPL.
*/
-#include "linux/init.h"
+#include <linux/init.h>
#include <linux/netdevice.h>
#include "etap.h"
#include "net_kern.h"
@@ -30,10 +30,10 @@
epri->control_fd = -1;
epri->dev = dev;
- printk("ethertap backend - %s", epri->dev_name);
+ printk(KERN_INFO "ethertap backend - %s", epri->dev_name);
if (epri->gate_addr != NULL)
- printk(", IP = %s", epri->gate_addr);
- printk("\n");
+ printk(KERN_CONT ", IP = %s", epri->gate_addr);
+ printk(KERN_CONT "\n");
}
static int etap_read(int fd, struct sk_buff *skb, struct uml_net_private *lp)
diff --git a/arch/um/os-Linux/drivers/tuntap_kern.c b/arch/um/os-Linux/drivers/tuntap_kern.c
index 9d38480..6b9e33d 100644
--- a/arch/um/os-Linux/drivers/tuntap_kern.c
+++ b/arch/um/os-Linux/drivers/tuntap_kern.c
@@ -29,10 +29,10 @@
tpri->fd = -1;
tpri->dev = dev;
- printk("TUN/TAP backend - ");
+ printk(KERN_INFO "TUN/TAP backend - ");
if (tpri->gate_addr != NULL)
- printk("IP = %s", tpri->gate_addr);
- printk("\n");
+ printk(KERN_CONT "IP = %s", tpri->gate_addr);
+ printk(KERN_CONT "\n");
}
static int tuntap_read(int fd, struct sk_buff *skb, struct uml_net_private *lp)
diff --git a/arch/um/os-Linux/include/file.h b/arch/um/os-Linux/include/file.h
index d82711e..fe71be2 100644
--- a/arch/um/os-Linux/include/file.h
+++ b/arch/um/os-Linux/include/file.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -9,14 +9,3 @@
#define DEV_NULL "/dev/null"
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index eedc2d8..93a11d7 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -1,22 +1,21 @@
+/*
+ * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
#include <stdio.h>
-#include <stdlib.h>
#include <stddef.h>
-#include <stdarg.h>
+#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
-#include <string.h>
#include <fcntl.h>
-#include <sys/types.h>
+#include <string.h>
#include <sys/mman.h>
-#include <sys/statfs.h>
-#include "user.h"
-#include "mem_user.h"
-#include "init.h"
-#include "os.h"
-#include "tempfile.h"
-#include "kern_constants.h"
-
#include <sys/param.h>
+#include "init.h"
+#include "kern_constants.h"
+#include "os.h"
+#include "user.h"
/* Modified by which_tmpdir, which is called during early boot */
static char *default_tmpdir = "/tmp";
@@ -33,18 +32,19 @@
int i;
char *dir = NULL;
- if(tempdir != NULL) /* We've already been called */
+ if (tempdir != NULL)
+ /* We've already been called */
return;
- for(i = 0; dirs[i]; i++){
+ for (i = 0; dirs[i]; i++) {
dir = getenv(dirs[i]);
- if((dir != NULL) && (*dir != '\0'))
+ if ((dir != NULL) && (*dir != '\0'))
break;
}
- if((dir == NULL) || (*dir == '\0'))
+ if ((dir == NULL) || (*dir == '\0'))
dir = default_tmpdir;
tempdir = malloc(strlen(dir) + 2);
- if(tempdir == NULL){
+ if (tempdir == NULL) {
fprintf(stderr, "Failed to malloc tempdir, "
"errno = %d\n", errno);
return;
@@ -53,7 +53,8 @@
strcat(tempdir, "/");
}
-/* This will return 1, with the first character in buf being the
+/*
+ * This will return 1, with the first character in buf being the
* character following the next instance of c in the file. This will
* read the file as needed. If there's an error, -errno is returned;
* if the end of the file is reached, 0 is returned.
@@ -64,11 +65,11 @@
size_t len;
char *ptr;
- while((ptr = strchr(buf, c)) == NULL){
+ while ((ptr = strchr(buf, c)) == NULL) {
n = read(fd, buf, size - 1);
- if(n == 0)
+ if (n == 0)
return 0;
- else if(n < 0)
+ else if (n < 0)
return -errno;
buf[n] = '\0';
@@ -78,11 +79,12 @@
len = strlen(ptr);
memmove(buf, ptr, len + 1);
- /* Refill the buffer so that if there's a partial string that we care
+ /*
+ * Refill the buffer so that if there's a partial string that we care
* about, it will be completed, and we can recognize it.
*/
n = read(fd, &buf[len], size - len - 1);
- if(n < 0)
+ if (n < 0)
return -errno;
buf[len + n] = '\0';
@@ -92,7 +94,8 @@
/* which_tmpdir is called only during early boot */
static int checked_tmpdir = 0;
-/* Look for a tmpfs mounted at /dev/shm. I couldn't find a cleaner
+/*
+ * Look for a tmpfs mounted at /dev/shm. I couldn't find a cleaner
* way to do this than to parse /proc/mounts. statfs will return the
* same filesystem magic number and fs id for both /dev and /dev/shm
* when they are both tmpfs, so you can't tell if they are different
@@ -107,7 +110,7 @@
int fd, found;
char buf[128] = { '\0' };
- if(checked_tmpdir)
+ if (checked_tmpdir)
return;
checked_tmpdir = 1;
@@ -115,28 +118,28 @@
printf("Checking for tmpfs mount on /dev/shm...");
fd = open("/proc/mounts", O_RDONLY);
- if(fd < 0){
+ if (fd < 0) {
printf("failed to open /proc/mounts, errno = %d\n", errno);
return;
}
- while(1){
+ while (1) {
found = next(fd, buf, ARRAY_SIZE(buf), ' ');
- if(found != 1)
+ if (found != 1)
break;
- if(!strncmp(buf, "/dev/shm", strlen("/dev/shm")))
+ if (!strncmp(buf, "/dev/shm", strlen("/dev/shm")))
goto found;
found = next(fd, buf, ARRAY_SIZE(buf), '\n');
- if(found != 1)
+ if (found != 1)
break;
}
err:
- if(found == 0)
+ if (found == 0)
printf("nothing mounted on /dev/shm\n");
- else if(found < 0)
+ else if (found < 0)
printf("read returned errno %d\n", -found);
out:
@@ -146,10 +149,10 @@
found:
found = next(fd, buf, ARRAY_SIZE(buf), ' ');
- if(found != 1)
+ if (found != 1)
goto err;
- if(strncmp(buf, "tmpfs", strlen("tmpfs"))){
+ if (strncmp(buf, "tmpfs", strlen("tmpfs"))) {
printf("not tmpfs\n");
goto out;
}
@@ -159,43 +162,40 @@
goto out;
}
-/*
- * This proc still used in tt-mode
- * (file: kernel/tt/ptproxy/proxy.c, proc: start_debugger).
- * So it isn't 'static' yet.
- */
-int __init make_tempfile(const char *template, char **out_tempname,
- int do_unlink)
+static int __init make_tempfile(const char *template, char **out_tempname,
+ int do_unlink)
{
char *tempname;
int fd;
which_tmpdir();
tempname = malloc(MAXPATHLEN);
- if (!tempname)
- goto out;
+ if (tempname == NULL)
+ return -1;
find_tempdir();
+ if ((tempdir == NULL) || (strlen(tempdir) >= MAXPATHLEN))
+ return -1;
+
if (template[0] != '/')
strcpy(tempname, tempdir);
else
tempname[0] = '\0';
strncat(tempname, template, MAXPATHLEN-1-strlen(tempname));
fd = mkstemp(tempname);
- if(fd < 0){
+ if (fd < 0) {
fprintf(stderr, "open - cannot create %s: %s\n", tempname,
strerror(errno));
goto out;
}
- if(do_unlink && (unlink(tempname) < 0)){
+ if (do_unlink && (unlink(tempname) < 0)) {
perror("unlink");
goto out;
}
- if(out_tempname){
+ if (out_tempname) {
*out_tempname = tempname;
- } else {
+ } else
free(tempname);
- }
return fd;
out:
free(tempname);
@@ -204,27 +204,23 @@
#define TEMPNAME_TEMPLATE "vm_file-XXXXXX"
-/*
- * This proc is used in start_up.c
- * So it isn't 'static'.
- */
-int __init create_tmp_file(unsigned long long len)
+static int __init create_tmp_file(unsigned long long len)
{
int fd, err;
char zero;
fd = make_tempfile(TEMPNAME_TEMPLATE, NULL, 1);
- if(fd < 0) {
+ if (fd < 0)
exit(1);
- }
err = fchmod(fd, 0777);
- if(err < 0){
+ if (err < 0) {
perror("fchmod");
exit(1);
}
- /* Seek to len - 1 because writing a character there will
+ /*
+ * Seek to len - 1 because writing a character there will
* increase the file size by one byte, to the desired length.
*/
if (lseek64(fd, len - 1, SEEK_SET) < 0) {
@@ -235,7 +231,7 @@
zero = 0;
err = write(fd, &zero, 1);
- if(err != 1){
+ if (err != 1) {
perror("write");
exit(1);
}
@@ -250,7 +246,7 @@
fd = create_tmp_file(len);
err = os_set_exec_close(fd);
- if(err < 0){
+ if (err < 0) {
errno = -err;
perror("exec_close");
}
@@ -267,11 +263,11 @@
PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0);
printf("Checking PROT_EXEC mmap in %s...",tempdir);
fflush(stdout);
- if(addr == MAP_FAILED){
+ if (addr == MAP_FAILED) {
err = errno;
perror("failed");
close(fd);
- if(err == EPERM)
+ if (err == EPERM)
printf("%s must be not mounted noexec\n",tempdir);
exit(1);
}
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index abf6bea..e0477c3 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -224,7 +224,7 @@
goto out_unmap;
}
- printk("OK\n");
+ printk(UM_KERN_CONT "OK\n");
ok = 1;
out_unmap:
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 0fb0cc8..3f1694b 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -237,7 +237,7 @@
* interrupts may have arrived and we need to re-enable them and
* recheck signals_pending.
*/
- while(1) {
+ while (1) {
/*
* Save and reset save_pending after enabling signals. This
* way, signals_pending won't be changed while we're reading it.
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index d36c89c..b148294 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -341,7 +341,7 @@
int local_using_sysemu;
if (getitimer(ITIMER_VIRTUAL, &timer))
- printk("Failed to get itimer, errno = %d\n", errno);
+ printk(UM_KERN_ERR "Failed to get itimer, errno = %d\n", errno);
nsecs = timer.it_value.tv_sec * UM_NSEC_PER_SEC +
timer.it_value.tv_usec * UM_NSEC_PER_USEC;
nsecs += os_nsecs();
@@ -388,7 +388,7 @@
if (WIFSTOPPED(status)) {
int sig = WSTOPSIG(status);
- switch(sig) {
+ switch (sig) {
case SIGSEGV:
if (PTRACE_FULL_FAULTINFO ||
!ptrace_faultinfo) {
@@ -641,7 +641,7 @@
* after returning to the jumper.
*/
n = setjmp(initial_jmpbuf);
- switch(n) {
+ switch (n) {
case INIT_JMP_NEW_THREAD:
(*switch_buf)[0].JB_IP = (unsigned long) new_thread_handler;
(*switch_buf)[0].JB_SP = (unsigned long) stack +
diff --git a/arch/um/os-Linux/sys-i386/Makefile b/arch/um/os-Linux/sys-i386/Makefile
index a841262..b4bc6ac 100644
--- a/arch/um/os-Linux/sys-i386/Makefile
+++ b/arch/um/os-Linux/sys-i386/Makefile
@@ -3,7 +3,7 @@
# Licensed under the GPL
#
-obj-y = registers.o signal.o tls.o
+obj-y = registers.o signal.o task_size.o tls.o
USER_OBJS := $(obj-y)
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index d1997ca..f74d853 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -62,10 +62,10 @@
int err;
err = ptrace(PTRACE_GETFPXREGS, pid, 0, fpx_regs);
- if(!err)
+ if (!err)
return;
- if(errno != EIO)
+ if (errno != EIO)
panic("check_ptrace : PTRACE_GETFPXREGS failed, errno = %d",
errno);
diff --git a/arch/um/os-Linux/sys-i386/task_size.c b/arch/um/os-Linux/sys-i386/task_size.c
new file mode 100644
index 0000000..48d211b
--- /dev/null
+++ b/arch/um/os-Linux/sys-i386/task_size.c
@@ -0,0 +1,120 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <sys/mman.h>
+#include "longjmp.h"
+#include "kern_constants.h"
+
+static jmp_buf buf;
+
+static void segfault(int sig)
+{
+ longjmp(buf, 1);
+}
+
+static int page_ok(unsigned long page)
+{
+ unsigned long *address = (unsigned long *) (page << UM_KERN_PAGE_SHIFT);
+ unsigned long n = ~0UL;
+ void *mapped = NULL;
+ int ok = 0;
+
+ /*
+ * First see if the page is readable. If it is, it may still
+ * be a VDSO, so we go on to see if it's writable. If not
+ * then try mapping memory there. If that fails, then we're
+ * still in the kernel area. As a sanity check, we'll fail if
+ * the mmap succeeds, but gives us an address different from
+ * what we wanted.
+ */
+ if (setjmp(buf) == 0)
+ n = *address;
+ else {
+ mapped = mmap(address, UM_KERN_PAGE_SIZE,
+ PROT_READ | PROT_WRITE,
+ MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (mapped == MAP_FAILED)
+ return 0;
+ if (mapped != address)
+ goto out;
+ }
+
+ /*
+ * Now, is it writeable? If so, then we're in user address
+ * space. If not, then try mprotecting it and try the write
+ * again.
+ */
+ if (setjmp(buf) == 0) {
+ *address = n;
+ ok = 1;
+ goto out;
+ } else if (mprotect(address, UM_KERN_PAGE_SIZE,
+ PROT_READ | PROT_WRITE) != 0)
+ goto out;
+
+ if (setjmp(buf) == 0) {
+ *address = n;
+ ok = 1;
+ }
+
+ out:
+ if (mapped != NULL)
+ munmap(mapped, UM_KERN_PAGE_SIZE);
+ return ok;
+}
+
+unsigned long os_get_task_size(void)
+{
+ struct sigaction sa, old;
+ unsigned long bottom = 0;
+ /*
+ * A 32-bit UML on a 64-bit host gets confused about the VDSO at
+ * 0xffffe000. It is mapped, is readable, can be reprotected writeable
+ * and written. However, exec discovers later that it can't be
+ * unmapped. So, just set the highest address to be checked to just
+ * below it. This might waste some address space on 4G/4G 32-bit
+ * hosts, but shouldn't hurt otherwise.
+ */
+ unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT;
+ unsigned long test;
+
+ printf("Locating the top of the address space ... ");
+ fflush(stdout);
+
+ /*
+ * We're going to be longjmping out of the signal handler, so
+ * SA_DEFER needs to be set.
+ */
+ sa.sa_handler = segfault;
+ sigemptyset(&sa.sa_mask);
+ sa.sa_flags = SA_NODEFER;
+ sigaction(SIGSEGV, &sa, &old);
+
+ if (!page_ok(bottom)) {
+ fprintf(stderr, "Address 0x%x no good?\n",
+ bottom << UM_KERN_PAGE_SHIFT);
+ exit(1);
+ }
+
+ /* This could happen with a 4G/4G split */
+ if (page_ok(top))
+ goto out;
+
+ do {
+ test = bottom + (top - bottom) / 2;
+ if (page_ok(test))
+ bottom = test;
+ else
+ top = test;
+ } while (top - bottom > 1);
+
+out:
+ /* Restore the old SIGSEGV handling */
+ sigaction(SIGSEGV, &old, NULL);
+
+ top <<= UM_KERN_PAGE_SHIFT;
+ printf("0x%x\n", top);
+ fflush(stdout);
+
+ return top;
+}
diff --git a/arch/um/os-Linux/sys-x86_64/Makefile b/arch/um/os-Linux/sys-x86_64/Makefile
index a42a4ef..a44a47f 100644
--- a/arch/um/os-Linux/sys-x86_64/Makefile
+++ b/arch/um/os-Linux/sys-x86_64/Makefile
@@ -3,7 +3,7 @@
# Licensed under the GPL
#
-obj-y = registers.o prctl.o signal.o
+obj-y = registers.o prctl.o signal.o task_size.o
USER_OBJS := $(obj-y)
diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c
index 9bfa789..a375853 100644
--- a/arch/um/os-Linux/sys-x86_64/registers.c
+++ b/arch/um/os-Linux/sys-x86_64/registers.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Copyright (C) 2006 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -7,31 +7,36 @@
#include <sys/ptrace.h>
#define __FRAME_OFFSETS
#include <asm/ptrace.h>
+#include "kern_constants.h"
#include "longjmp.h"
#include "user.h"
int save_fp_registers(int pid, unsigned long *fp_regs)
{
- if(ptrace(PTRACE_GETFPREGS, pid, 0, fp_regs) < 0)
+ if (ptrace(PTRACE_GETFPREGS, pid, 0, fp_regs) < 0)
return -errno;
return 0;
}
int restore_fp_registers(int pid, unsigned long *fp_regs)
{
- if(ptrace(PTRACE_SETFPREGS, pid, 0, fp_regs) < 0)
+ if (ptrace(PTRACE_SETFPREGS, pid, 0, fp_regs) < 0)
return -errno;
return 0;
}
unsigned long get_thread_reg(int reg, jmp_buf *buf)
{
- switch(reg){
- case RIP: return buf[0]->__rip;
- case RSP: return buf[0]->__rsp;
- case RBP: return buf[0]->__rbp;
+ switch (reg) {
+ case RIP:
+ return buf[0]->__rip;
+ case RSP:
+ return buf[0]->__rsp;
+ case RBP:
+ return buf[0]->__rbp;
default:
- printk("get_thread_regs - unknown register %d\n", reg);
+ printk(UM_KERN_ERR "get_thread_regs - unknown register %d\n",
+ reg);
return 0;
}
}
diff --git a/arch/um/os-Linux/sys-x86_64/task_size.c b/arch/um/os-Linux/sys-x86_64/task_size.c
new file mode 100644
index 0000000..fad6f57
--- /dev/null
+++ b/arch/um/os-Linux/sys-x86_64/task_size.c
@@ -0,0 +1,5 @@
+unsigned long os_get_task_size(unsigned long shift)
+{
+ /* The old value of CONFIG_TOP_ADDR */
+ return 0x7fc0000000;
+}
diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c
index 8d27b6d..087ed74 100644
--- a/arch/um/os-Linux/uaccess.c
+++ b/arch/um/os-Linux/uaccess.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk)
- * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -16,7 +16,7 @@
jmp_buf jbuf;
*fault_catcher = &jbuf;
- if(UML_SETJMP(&jbuf) == 0){
+ if (UML_SETJMP(&jbuf) == 0) {
(*op)(to, from, n);
ret = 0;
*faulted_out = 0;
diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c
index 4c37b1b..74f49bb 100644
--- a/arch/um/os-Linux/user_syms.c
+++ b/arch/um/os-Linux/user_syms.c
@@ -34,8 +34,8 @@
* good; so the versions of these symbols will always match
*/
#define EXPORT_SYMBOL_PROTO(sym) \
- int sym(void); \
- EXPORT_SYMBOL(sym);
+ int sym(void); \
+ EXPORT_SYMBOL(sym);
extern void readdir64(void) __attribute__((weak));
EXPORT_SYMBOL(readdir64);
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index a6f31d4..6ea7797 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -1,39 +1,24 @@
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#include <stdio.h>
#include <stdlib.h>
-#include <unistd.h>
-#include <limits.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/param.h>
-#include <sys/time.h>
-#include "asm/types.h"
-#include <ctype.h>
-#include <signal.h>
-#include <wait.h>
#include <errno.h>
-#include <stdarg.h>
-#include <sched.h>
-#include <termios.h>
+#include <signal.h>
#include <string.h>
-#include "kern_util.h"
-#include "user.h"
-#include "mem_user.h"
-#include "init.h"
-#include "ptrace_user.h"
-#include "uml-config.h"
-#include "os.h"
-#include "longjmp.h"
+#include <termios.h>
+#include <wait.h>
+#include <sys/mman.h>
+#include <sys/utsname.h>
#include "kern_constants.h"
+#include "os.h"
+#include "user.h"
void stack_protections(unsigned long address)
{
- if(mprotect((void *) address, UM_THREAD_SIZE,
+ if (mprotect((void *) address, UM_THREAD_SIZE,
PROT_READ | PROT_WRITE | PROT_EXEC) < 0)
panic("protecting stack failed, errno = %d", errno);
}
@@ -44,17 +29,19 @@
int err;
CATCH_EINTR(err = tcgetattr(fd, &tt));
- if(err < 0)
+ if (err < 0)
return -errno;
cfmakeraw(&tt);
CATCH_EINTR(err = tcsetattr(fd, TCSADRAIN, &tt));
- if(err < 0)
+ if (err < 0)
return -errno;
- /* XXX tcsetattr could have applied only some changes
- * (and cfmakeraw() is a set of changes) */
+ /*
+ * XXX tcsetattr could have applied only some changes
+ * (and cfmakeraw() is a set of changes)
+ */
return 0;
}
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
index ace479a..7b6d371 100644
--- a/arch/v850/Kconfig
+++ b/arch/v850/Kconfig
@@ -53,6 +53,9 @@
bool
default n
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
# Turn off some random 386 crap that can affect device config
config ISA
bool
@@ -212,6 +215,13 @@
bool
default !V850E_CACHE && !V850E2_CACHE
+ # HZ depends on the platform
+ config HZ
+ int
+ default 24 if V850E_SIM || V850E2_SIM85E2
+ default 122 if V850E2_FPGA85E2C
+ default 100
+
#### Misc config
config ROM_KERNEL
diff --git a/arch/v850/kernel/procfs.c b/arch/v850/kernel/procfs.c
index e6f9d06..e433cde 100644
--- a/arch/v850/kernel/procfs.c
+++ b/arch/v850/kernel/procfs.c
@@ -59,7 +59,7 @@
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = cpuinfo_start,
.next = cpuinfo_next,
.stop = cpuinfo_stop,
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9d0aced..65a70b7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -136,6 +136,9 @@
bool
default X86_64
+config ARCH_SUPPORTS_AOUT
+ def_bool y
+
# Use the generic interrupt handling code in kernel/irq/:
config GENERIC_HARDIRQS
bool
@@ -1577,7 +1580,7 @@
config IA32_AOUT
tristate "IA32 a.out support"
- depends on IA32_EMULATION
+ depends on IA32_EMULATION && ARCH_SUPPORTS_AOUT
help
Support old a.out binaries in the 32bit emulation.
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index dabdbef..a7d50a5 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -23,7 +23,6 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/interrupt.h>
#include <linux/utsname.h>
#include <linux/delay.h>
@@ -539,55 +538,6 @@
return err;
}
-/*
- * fill in the user structure for a core dump..
- */
-void dump_thread(struct pt_regs * regs, struct user * dump)
-{
- u16 gs;
-
-/* changed the size calculations - should hopefully work better. lbt */
- dump->magic = CMAGIC;
- dump->start_code = 0;
- dump->start_stack = regs->sp & ~(PAGE_SIZE - 1);
- dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
- dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;
- dump->u_dsize -= dump->u_tsize;
- dump->u_ssize = 0;
- dump->u_debugreg[0] = current->thread.debugreg0;
- dump->u_debugreg[1] = current->thread.debugreg1;
- dump->u_debugreg[2] = current->thread.debugreg2;
- dump->u_debugreg[3] = current->thread.debugreg3;
- dump->u_debugreg[4] = 0;
- dump->u_debugreg[5] = 0;
- dump->u_debugreg[6] = current->thread.debugreg6;
- dump->u_debugreg[7] = current->thread.debugreg7;
-
- if (dump->start_stack < TASK_SIZE)
- dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
-
- dump->regs.bx = regs->bx;
- dump->regs.cx = regs->cx;
- dump->regs.dx = regs->dx;
- dump->regs.si = regs->si;
- dump->regs.di = regs->di;
- dump->regs.bp = regs->bp;
- dump->regs.ax = regs->ax;
- dump->regs.ds = (u16)regs->ds;
- dump->regs.es = (u16)regs->es;
- dump->regs.fs = (u16)regs->fs;
- savesegment(gs,gs);
- dump->regs.orig_ax = regs->orig_ax;
- dump->regs.ip = regs->ip;
- dump->regs.cs = (u16)regs->cs;
- dump->regs.flags = regs->flags;
- dump->regs.sp = regs->sp;
- dump->regs.ss = (u16)regs->ss;
-
- dump->u_fpvalid = dump_fpu (regs, &dump->i387);
-}
-EXPORT_SYMBOL(dump_thread);
-
#ifdef CONFIG_SECCOMP
static void hard_disable_TSC(void)
{
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 137a861..b0cc8f0 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -26,7 +26,6 @@
#include <linux/smp.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/interrupt.h>
#include <linux/utsname.h>
#include <linux/delay.h>
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index a49f5f7..c0d8208 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -15,7 +15,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/screen_info.h>
#include <linux/ioport.h>
#include <linux/delay.h>
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 0380795..c737849 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -77,7 +77,7 @@
reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
}
local_irq_save(flags);
- /* start meauring cycles, incrementing from 0 */
+ /* start measuring cycles, incrementing from 0 */
wrmsrl(MSR_K7_PERFCTR0 + i, 0);
wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
rdtscl(tsc_start);
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 6c19146..73aba71 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -183,7 +183,7 @@
return (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
}
-struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *pte;
@@ -192,6 +192,8 @@
#else
pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
#endif
+ if (pte)
+ pgtable_page_ctor(pte);
return pte;
}
@@ -365,6 +367,7 @@
void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
{
+ pgtable_page_dtor(pte);
paravirt_release_pt(page_to_pfn(pte));
tlb_remove_page(tlb, pte);
}
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 5d5546c..fd36764 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -49,6 +49,10 @@
config NO_IOPORT
def_bool y
+config HZ
+ int
+ default 100
+
source "init/Kconfig"
menu "Processor type and features"
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 2e8d398..b80f2cb 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -469,7 +469,7 @@
{
}
-struct seq_operations cpuinfo_op =
+const struct seq_operations cpuinfo_op =
{
start: c_start,
next: c_next,
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 64e5148..b6d230b 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -322,7 +322,7 @@
If unsure, say N.
config BLK_DEV_RAM
- tristate "RAM disk support"
+ tristate "RAM block device support"
---help---
Saying Y here will allow you to use a portion of your RAM memory as
a block device, so that you can make file systems on it, read and
@@ -357,15 +357,15 @@
The default value is 4096 kilobytes. Only change this if you know
what you are doing.
-config BLK_DEV_RAM_BLOCKSIZE
- int "Default RAM disk block size (bytes)"
+config BLK_DEV_XIP
+ bool "Support XIP filesystems on RAM block device"
depends on BLK_DEV_RAM
- default "1024"
+ default n
help
- The default value is 1024 bytes. PAGE_SIZE is a much more
- efficient choice however. The default is kept to ensure initrd
- setups function - apparently needed by the rd_load_image routine
- that supposes the filesystem in the image uses a 1024 blocksize.
+ Support XIP filesystems (such as ext2 with XIP support on) on
+ top of block ram device. This will slightly enlarge the kernel, and
+ will prevent RAM block device backing store memory from being
+ allocated from highmem (only a problem for highmem systems).
config CDROM_PKTCDVD
tristate "Packet writing on CD/DVD media"
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 7691505..01c9724 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -11,7 +11,7 @@
obj-$(CONFIG_PS3_DISK) += ps3disk.o
obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
-obj-$(CONFIG_BLK_DEV_RAM) += rd.o
+obj-$(CONFIG_BLK_DEV_RAM) += brd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
obj-$(CONFIG_BLK_DEV_PS2) += ps2esdi.o
obj-$(CONFIG_BLK_DEV_XD) += xd.o
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index 07f02f8..280e71e 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -1,5 +1,5 @@
-/* Copyright (c) 2006 Coraid, Inc. See COPYING for GPL terms. */
-#define VERSION "32"
+/* Copyright (c) 2007 Coraid, Inc. See COPYING for GPL terms. */
+#define VERSION "47"
#define AOE_MAJOR 152
#define DEVICE_NAME "aoe"
@@ -76,10 +76,8 @@
DEVFL_EXT = (1<<2), /* device accepts lba48 commands */
DEVFL_CLOSEWAIT = (1<<3), /* device is waiting for all closes to revalidate */
DEVFL_GDALLOC = (1<<4), /* need to alloc gendisk */
- DEVFL_PAUSE = (1<<5),
+ DEVFL_KICKME = (1<<5), /* slow polling network card catch */
DEVFL_NEWSIZE = (1<<6), /* need to update dev size in block layer */
- DEVFL_MAXBCNT = (1<<7), /* d->maxbcnt is not changeable */
- DEVFL_KICKME = (1<<8),
BUFFL_FAIL = 1,
};
@@ -88,17 +86,25 @@
DEFAULTBCNT = 2 * 512, /* 2 sectors */
NPERSHELF = 16, /* number of slots per shelf address */
FREETAG = -1,
- MIN_BUFS = 8,
+ MIN_BUFS = 16,
+ NTARGETS = 8,
+ NAOEIFS = 8,
+ NSKBPOOLMAX = 128,
+
+ TIMERTICK = HZ / 10,
+ MINTIMER = HZ >> 2,
+ MAXTIMER = HZ << 1,
+ HELPWAIT = 20,
};
struct buf {
struct list_head bufs;
- ulong start_time; /* for disk stats */
+ ulong stime; /* for disk stats */
ulong flags;
ulong nframesout;
- char *bufaddr;
ulong resid;
ulong bv_resid;
+ ulong bv_off;
sector_t sector;
struct bio *bio;
struct bio_vec *bv;
@@ -114,19 +120,38 @@
struct sk_buff *skb;
};
+struct aoeif {
+ struct net_device *nd;
+ unsigned char lost;
+ unsigned char lostjumbo;
+ ushort maxbcnt;
+};
+
+struct aoetgt {
+ unsigned char addr[6];
+ ushort nframes;
+ struct frame *frames;
+ struct aoeif ifs[NAOEIFS];
+ struct aoeif *ifp; /* current aoeif in use */
+ ushort nout;
+ ushort maxout;
+ u16 lasttag; /* last tag sent */
+ u16 useme;
+ ulong lastwadj; /* last window adjustment */
+ int wpkts, rpkts;
+ int dataref;
+};
+
struct aoedev {
struct aoedev *next;
- unsigned char addr[6]; /* remote mac addr */
- ushort flags;
ulong sysminor;
ulong aoemajor;
- ulong aoeminor;
+ u16 aoeminor;
+ u16 flags;
u16 nopen; /* (bd_openers isn't available without sleeping) */
- u16 lasttag; /* last tag sent */
u16 rttavg; /* round trip average of requests/responses */
u16 mintimer;
u16 fw_ver; /* version of blade's firmware */
- u16 maxbcnt;
struct work_struct work;/* disk create work struct */
struct gendisk *gd;
struct request_queue blkq;
@@ -134,15 +159,17 @@
sector_t ssize;
struct timer_list timer;
spinlock_t lock;
- struct net_device *ifp; /* interface ed is attached to */
struct sk_buff *sendq_hd; /* packets needing to be sent, list head */
struct sk_buff *sendq_tl;
+ struct sk_buff *skbpool_hd;
+ struct sk_buff *skbpool_tl;
+ int nskbpool;
mempool_t *bufpool; /* for deadlock-free Buf allocation */
struct list_head bufq; /* queue of bios to work on */
struct buf *inprocess; /* the one we're currently working on */
- ushort lostjumbo;
- ushort nframes; /* number of frames below */
- struct frame *frames;
+ struct aoetgt *targets[NTARGETS];
+ struct aoetgt **tgt; /* target in use when working */
+ struct aoetgt **htgt; /* target needing rexmit assistance */
};
@@ -160,14 +187,16 @@
void aoecmd_ata_rsp(struct sk_buff *);
void aoecmd_cfg_rsp(struct sk_buff *);
void aoecmd_sleepwork(struct work_struct *);
-struct sk_buff *new_skb(ulong);
+void aoecmd_cleanslate(struct aoedev *);
+struct sk_buff *aoecmd_ata_id(struct aoedev *);
int aoedev_init(void);
void aoedev_exit(void);
struct aoedev *aoedev_by_aoeaddr(int maj, int min);
-struct aoedev *aoedev_by_sysminor_m(ulong sysminor, ulong bufcnt);
+struct aoedev *aoedev_by_sysminor_m(ulong sysminor);
void aoedev_downdev(struct aoedev *d);
int aoedev_isbusy(struct aoedev *d);
+int aoedev_flush(const char __user *str, size_t size);
int aoenet_init(void);
void aoenet_exit(void);
@@ -175,4 +204,4 @@
int is_aoe_netif(struct net_device *ifp);
int set_aoe_iflist(const char __user *str, size_t size);
-u64 mac_addr(char addr[6]);
+unsigned long long mac_addr(char addr[6]);
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index 826d123..0c39782 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2006 Coraid, Inc. See COPYING for GPL terms. */
+/* Copyright (c) 2007 Coraid, Inc. See COPYING for GPL terms. */
/*
* aoeblk.c
* block device routines
@@ -24,7 +24,7 @@
return snprintf(page, PAGE_SIZE,
"%s%s\n",
(d->flags & DEVFL_UP) ? "up" : "down",
- (d->flags & DEVFL_PAUSE) ? ",paused" :
+ (d->flags & DEVFL_KICKME) ? ",kickme" :
(d->nopen && !(d->flags & DEVFL_UP)) ? ",closewait" : "");
/* I'd rather see nopen exported so we can ditch closewait */
}
@@ -33,17 +33,48 @@
{
struct gendisk *disk = dev_to_disk(dev);
struct aoedev *d = disk->private_data;
+ struct aoetgt *t = d->targets[0];
- return snprintf(page, PAGE_SIZE, "%012llx\n",
- (unsigned long long)mac_addr(d->addr));
+ if (t == NULL)
+ return snprintf(page, PAGE_SIZE, "none\n");
+ return snprintf(page, PAGE_SIZE, "%012llx\n", mac_addr(t->addr));
}
static ssize_t aoedisk_show_netif(struct device *dev,
struct device_attribute *attr, char *page)
{
struct gendisk *disk = dev_to_disk(dev);
struct aoedev *d = disk->private_data;
+ struct net_device *nds[8], **nd, **nnd, **ne;
+ struct aoetgt **t, **te;
+ struct aoeif *ifp, *e;
+ char *p;
- return snprintf(page, PAGE_SIZE, "%s\n", d->ifp->name);
+ memset(nds, 0, sizeof nds);
+ nd = nds;
+ ne = nd + ARRAY_SIZE(nds);
+ t = d->targets;
+ te = t + NTARGETS;
+ for (; t < te && *t; t++) {
+ ifp = (*t)->ifs;
+ e = ifp + NAOEIFS;
+ for (; ifp < e && ifp->nd; ifp++) {
+ for (nnd = nds; nnd < nd; nnd++)
+ if (*nnd == ifp->nd)
+ break;
+ if (nnd == nd && nd != ne)
+ *nd++ = ifp->nd;
+ }
+ }
+
+ ne = nd;
+ nd = nds;
+ if (*nd == NULL)
+ return snprintf(page, PAGE_SIZE, "none\n");
+ for (p = page; nd < ne; nd++)
+ p += snprintf(p, PAGE_SIZE - (p-page), "%s%s",
+ p == page ? "" : ",", (*nd)->name);
+ p += snprintf(p, PAGE_SIZE - (p-page), "\n");
+ return p-page;
}
/* firmware version */
static ssize_t aoedisk_show_fwver(struct device *dev,
@@ -134,7 +165,23 @@
blk_queue_bounce(q, &bio);
+ if (bio == NULL) {
+ printk(KERN_ERR "aoe: bio is NULL\n");
+ BUG();
+ return 0;
+ }
d = bio->bi_bdev->bd_disk->private_data;
+ if (d == NULL) {
+ printk(KERN_ERR "aoe: bd_disk->private_data is NULL\n");
+ BUG();
+ bio_endio(bio, -ENXIO);
+ return 0;
+ } else if (bio->bi_io_vec == NULL) {
+ printk(KERN_ERR "aoe: bi_io_vec is NULL\n");
+ BUG();
+ bio_endio(bio, -ENXIO);
+ return 0;
+ }
buf = mempool_alloc(d->bufpool, GFP_NOIO);
if (buf == NULL) {
printk(KERN_INFO "aoe: buf allocation failure\n");
@@ -143,19 +190,19 @@
}
memset(buf, 0, sizeof(*buf));
INIT_LIST_HEAD(&buf->bufs);
- buf->start_time = jiffies;
+ buf->stime = jiffies;
buf->bio = bio;
buf->resid = bio->bi_size;
buf->sector = bio->bi_sector;
buf->bv = &bio->bi_io_vec[bio->bi_idx];
- WARN_ON(buf->bv->bv_len == 0);
buf->bv_resid = buf->bv->bv_len;
- buf->bufaddr = page_address(buf->bv->bv_page) + buf->bv->bv_offset;
+ WARN_ON(buf->bv_resid == 0);
+ buf->bv_off = buf->bv->bv_offset;
spin_lock_irqsave(&d->lock, flags);
if ((d->flags & DEVFL_UP) == 0) {
- printk(KERN_INFO "aoe: device %ld.%ld is not up\n",
+ printk(KERN_INFO "aoe: device %ld.%d is not up\n",
d->aoemajor, d->aoeminor);
spin_unlock_irqrestore(&d->lock, flags);
mempool_free(buf, d->bufpool);
@@ -208,14 +255,15 @@
gd = alloc_disk(AOE_PARTITIONS);
if (gd == NULL) {
- printk(KERN_ERR "aoe: cannot allocate disk structure for %ld.%ld\n",
+ printk(KERN_ERR
+ "aoe: cannot allocate disk structure for %ld.%d\n",
d->aoemajor, d->aoeminor);
goto err;
}
d->bufpool = mempool_create_slab_pool(MIN_BUFS, buf_pool_cache);
if (d->bufpool == NULL) {
- printk(KERN_ERR "aoe: cannot allocate bufpool for %ld.%ld\n",
+ printk(KERN_ERR "aoe: cannot allocate bufpool for %ld.%d\n",
d->aoemajor, d->aoeminor);
goto err_disk;
}
@@ -229,7 +277,7 @@
gd->fops = &aoe_bdops;
gd->private_data = d;
gd->capacity = d->ssize;
- snprintf(gd->disk_name, sizeof gd->disk_name, "etherd/e%ld.%ld",
+ snprintf(gd->disk_name, sizeof gd->disk_name, "etherd/e%ld.%d",
d->aoemajor, d->aoeminor);
gd->queue = &d->blkq;
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index d5480e3..e8e60e7 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2006 Coraid, Inc. See COPYING for GPL terms. */
+/* Copyright (c) 2007 Coraid, Inc. See COPYING for GPL terms. */
/*
* aoechr.c
* AoE character device driver
@@ -6,6 +6,7 @@
#include <linux/hdreg.h>
#include <linux/blkdev.h>
+#include <linux/delay.h>
#include "aoe.h"
enum {
@@ -14,6 +15,7 @@
MINOR_DISCOVER,
MINOR_INTERFACES,
MINOR_REVALIDATE,
+ MINOR_FLUSH,
MSGSZ = 2048,
NMSG = 100, /* message backlog to retain */
};
@@ -42,6 +44,7 @@
{ MINOR_DISCOVER, "discover" },
{ MINOR_INTERFACES, "interfaces" },
{ MINOR_REVALIDATE, "revalidate" },
+ { MINOR_FLUSH, "flush" },
};
static int
@@ -68,6 +71,7 @@
int major, minor, n;
ulong flags;
struct aoedev *d;
+ struct sk_buff *skb;
char buf[16];
if (size >= sizeof buf)
@@ -85,13 +89,20 @@
d = aoedev_by_aoeaddr(major, minor);
if (!d)
return -EINVAL;
-
spin_lock_irqsave(&d->lock, flags);
- d->flags &= ~DEVFL_MAXBCNT;
- d->flags |= DEVFL_PAUSE;
+ aoecmd_cleanslate(d);
+loop:
+ skb = aoecmd_ata_id(d);
spin_unlock_irqrestore(&d->lock, flags);
+ /* try again if we are able to sleep a bit,
+ * otherwise give up this revalidation
+ */
+ if (!skb && !msleep_interruptible(200)) {
+ spin_lock_irqsave(&d->lock, flags);
+ goto loop;
+ }
+ aoenet_xmit(skb);
aoecmd_cfg(major, minor);
-
return 0;
}
@@ -149,6 +160,9 @@
break;
case MINOR_REVALIDATE:
ret = revalidate(buf, cnt);
+ break;
+ case MINOR_FLUSH:
+ ret = aoedev_flush(buf, cnt);
}
if (ret == 0)
ret = cnt;
@@ -185,52 +199,51 @@
ulong flags;
n = (unsigned long) filp->private_data;
- switch (n) {
- case MINOR_ERR:
- spin_lock_irqsave(&emsgs_lock, flags);
-loop:
+ if (n != MINOR_ERR)
+ return -EFAULT;
+
+ spin_lock_irqsave(&emsgs_lock, flags);
+
+ for (;;) {
em = emsgs + emsgs_head_idx;
- if ((em->flags & EMFL_VALID) == 0) {
- if (filp->f_flags & O_NDELAY) {
- spin_unlock_irqrestore(&emsgs_lock, flags);
- return -EAGAIN;
- }
- nblocked_emsgs_readers++;
-
- spin_unlock_irqrestore(&emsgs_lock, flags);
-
- n = down_interruptible(&emsgs_sema);
-
- spin_lock_irqsave(&emsgs_lock, flags);
-
- nblocked_emsgs_readers--;
-
- if (n) {
- spin_unlock_irqrestore(&emsgs_lock, flags);
- return -ERESTARTSYS;
- }
- goto loop;
- }
- if (em->len > cnt) {
+ if ((em->flags & EMFL_VALID) != 0)
+ break;
+ if (filp->f_flags & O_NDELAY) {
spin_unlock_irqrestore(&emsgs_lock, flags);
return -EAGAIN;
}
- mp = em->msg;
- len = em->len;
- em->msg = NULL;
- em->flags &= ~EMFL_VALID;
-
- emsgs_head_idx++;
- emsgs_head_idx %= ARRAY_SIZE(emsgs);
+ nblocked_emsgs_readers++;
spin_unlock_irqrestore(&emsgs_lock, flags);
- n = copy_to_user(buf, mp, len);
- kfree(mp);
- return n == 0 ? len : -EFAULT;
- default:
- return -EFAULT;
+ n = down_interruptible(&emsgs_sema);
+
+ spin_lock_irqsave(&emsgs_lock, flags);
+
+ nblocked_emsgs_readers--;
+
+ if (n) {
+ spin_unlock_irqrestore(&emsgs_lock, flags);
+ return -ERESTARTSYS;
+ }
}
+ if (em->len > cnt) {
+ spin_unlock_irqrestore(&emsgs_lock, flags);
+ return -EAGAIN;
+ }
+ mp = em->msg;
+ len = em->len;
+ em->msg = NULL;
+ em->flags &= ~EMFL_VALID;
+
+ emsgs_head_idx++;
+ emsgs_head_idx %= ARRAY_SIZE(emsgs);
+
+ spin_unlock_irqrestore(&emsgs_lock, flags);
+
+ n = copy_to_user(buf, mp, len);
+ kfree(mp);
+ return n == 0 ? len : -EFAULT;
}
static const struct file_operations aoe_fops = {
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 4d59d50..44beb17 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2006 Coraid, Inc. See COPYING for GPL terms. */
+/* Copyright (c) 2007 Coraid, Inc. See COPYING for GPL terms. */
/*
* aoecmd.c
* Filesystem request handling methods
@@ -9,19 +9,21 @@
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/genhd.h>
+#include <linux/moduleparam.h>
#include <net/net_namespace.h>
#include <asm/unaligned.h>
#include "aoe.h"
-#define TIMERTICK (HZ / 10)
-#define MINTIMER (2 * TIMERTICK)
-#define MAXTIMER (HZ << 1)
-
static int aoe_deadsecs = 60 * 3;
module_param(aoe_deadsecs, int, 0644);
MODULE_PARM_DESC(aoe_deadsecs, "After aoe_deadsecs seconds, give up and fail dev.");
-struct sk_buff *
+static int aoe_maxout = 16;
+module_param(aoe_maxout, int, 0644);
+MODULE_PARM_DESC(aoe_maxout,
+ "Only aoe_maxout outstanding packets for every MAC on eX.Y.");
+
+static struct sk_buff *
new_skb(ulong len)
{
struct sk_buff *skb;
@@ -43,12 +45,12 @@
}
static struct frame *
-getframe(struct aoedev *d, int tag)
+getframe(struct aoetgt *t, int tag)
{
struct frame *f, *e;
- f = d->frames;
- e = f + d->nframes;
+ f = t->frames;
+ e = f + t->nframes;
for (; f<e; f++)
if (f->tag == tag)
return f;
@@ -61,21 +63,21 @@
* This driver reserves tag -1 to mean "unused frame."
*/
static int
-newtag(struct aoedev *d)
+newtag(struct aoetgt *t)
{
register ulong n;
n = jiffies & 0xffff;
- return n |= (++d->lasttag & 0x7fff) << 16;
+ return n |= (++t->lasttag & 0x7fff) << 16;
}
static int
-aoehdr_atainit(struct aoedev *d, struct aoe_hdr *h)
+aoehdr_atainit(struct aoedev *d, struct aoetgt *t, struct aoe_hdr *h)
{
- u32 host_tag = newtag(d);
+ u32 host_tag = newtag(t);
- memcpy(h->src, d->ifp->dev_addr, sizeof h->src);
- memcpy(h->dst, d->addr, sizeof h->dst);
+ memcpy(h->src, t->ifp->nd->dev_addr, sizeof h->src);
+ memcpy(h->dst, t->addr, sizeof h->dst);
h->type = __constant_cpu_to_be16(ETH_P_AOE);
h->verfl = AOE_HVER;
h->major = cpu_to_be16(d->aoemajor);
@@ -98,42 +100,162 @@
}
static void
-aoecmd_ata_rw(struct aoedev *d, struct frame *f)
+ifrotate(struct aoetgt *t)
{
+ t->ifp++;
+ if (t->ifp >= &t->ifs[NAOEIFS] || t->ifp->nd == NULL)
+ t->ifp = t->ifs;
+ if (t->ifp->nd == NULL) {
+ printk(KERN_INFO "aoe: no interface to rotate to\n");
+ BUG();
+ }
+}
+
+static void
+skb_pool_put(struct aoedev *d, struct sk_buff *skb)
+{
+ if (!d->skbpool_hd)
+ d->skbpool_hd = skb;
+ else
+ d->skbpool_tl->next = skb;
+ d->skbpool_tl = skb;
+}
+
+static struct sk_buff *
+skb_pool_get(struct aoedev *d)
+{
+ struct sk_buff *skb;
+
+ skb = d->skbpool_hd;
+ if (skb && atomic_read(&skb_shinfo(skb)->dataref) == 1) {
+ d->skbpool_hd = skb->next;
+ skb->next = NULL;
+ return skb;
+ }
+ if (d->nskbpool < NSKBPOOLMAX
+ && (skb = new_skb(ETH_ZLEN))) {
+ d->nskbpool++;
+ return skb;
+ }
+ return NULL;
+}
+
+/* freeframe is where we do our load balancing so it's a little hairy. */
+static struct frame *
+freeframe(struct aoedev *d)
+{
+ struct frame *f, *e, *rf;
+ struct aoetgt **t;
+ struct sk_buff *skb;
+
+ if (d->targets[0] == NULL) { /* shouldn't happen, but I'm paranoid */
+ printk(KERN_ERR "aoe: NULL TARGETS!\n");
+ return NULL;
+ }
+ t = d->tgt;
+ t++;
+ if (t >= &d->targets[NTARGETS] || !*t)
+ t = d->targets;
+ for (;;) {
+ if ((*t)->nout < (*t)->maxout
+ && t != d->htgt
+ && (*t)->ifp->nd) {
+ rf = NULL;
+ f = (*t)->frames;
+ e = f + (*t)->nframes;
+ for (; f < e; f++) {
+ if (f->tag != FREETAG)
+ continue;
+ skb = f->skb;
+ if (!skb
+ && !(f->skb = skb = new_skb(ETH_ZLEN)))
+ continue;
+ if (atomic_read(&skb_shinfo(skb)->dataref)
+ != 1) {
+ if (!rf)
+ rf = f;
+ continue;
+ }
+gotone: skb_shinfo(skb)->nr_frags = skb->data_len = 0;
+ skb_trim(skb, 0);
+ d->tgt = t;
+ ifrotate(*t);
+ return f;
+ }
+ /* Work can be done, but the network layer is
+ holding our precious packets. Try to grab
+ one from the pool. */
+ f = rf;
+ if (f == NULL) { /* more paranoia */
+ printk(KERN_ERR
+ "aoe: freeframe: %s.\n",
+ "unexpected null rf");
+ d->flags |= DEVFL_KICKME;
+ return NULL;
+ }
+ skb = skb_pool_get(d);
+ if (skb) {
+ skb_pool_put(d, f->skb);
+ f->skb = skb;
+ goto gotone;
+ }
+ (*t)->dataref++;
+ if ((*t)->nout == 0)
+ d->flags |= DEVFL_KICKME;
+ }
+ if (t == d->tgt) /* we've looped and found nada */
+ break;
+ t++;
+ if (t >= &d->targets[NTARGETS] || !*t)
+ t = d->targets;
+ }
+ return NULL;
+}
+
+static int
+aoecmd_ata_rw(struct aoedev *d)
+{
+ struct frame *f;
struct aoe_hdr *h;
struct aoe_atahdr *ah;
struct buf *buf;
+ struct bio_vec *bv;
+ struct aoetgt *t;
struct sk_buff *skb;
ulong bcnt;
- register sector_t sector;
char writebit, extbit;
writebit = 0x10;
extbit = 0x4;
+ f = freeframe(d);
+ if (f == NULL)
+ return 0;
+ t = *d->tgt;
buf = d->inprocess;
-
- sector = buf->sector;
- bcnt = buf->bv_resid;
- if (bcnt > d->maxbcnt)
- bcnt = d->maxbcnt;
-
+ bv = buf->bv;
+ bcnt = t->ifp->maxbcnt;
+ if (bcnt == 0)
+ bcnt = DEFAULTBCNT;
+ if (bcnt > buf->bv_resid)
+ bcnt = buf->bv_resid;
/* initialize the headers & frame */
skb = f->skb;
h = (struct aoe_hdr *) skb_mac_header(skb);
ah = (struct aoe_atahdr *) (h+1);
skb_put(skb, sizeof *h + sizeof *ah);
memset(h, 0, skb->len);
- f->tag = aoehdr_atainit(d, h);
+ f->tag = aoehdr_atainit(d, t, h);
+ t->nout++;
f->waited = 0;
f->buf = buf;
- f->bufaddr = buf->bufaddr;
+ f->bufaddr = page_address(bv->bv_page) + buf->bv_off;
f->bcnt = bcnt;
- f->lba = sector;
+ f->lba = buf->sector;
/* set up ata header */
ah->scnt = bcnt >> 9;
- put_lba(ah, sector);
+ put_lba(ah, buf->sector);
if (d->flags & DEVFL_EXT) {
ah->aflags |= AOEAFL_EXT;
} else {
@@ -141,14 +263,14 @@
ah->lba3 &= 0x0f;
ah->lba3 |= 0xe0; /* LBA bit + obsolete 0xa0 */
}
-
if (bio_data_dir(buf->bio) == WRITE) {
- skb_fill_page_desc(skb, 0, virt_to_page(f->bufaddr),
- offset_in_page(f->bufaddr), bcnt);
+ skb_fill_page_desc(skb, 0, bv->bv_page, buf->bv_off, bcnt);
ah->aflags |= AOEAFL_WRITE;
skb->len += bcnt;
skb->data_len = bcnt;
+ t->wpkts++;
} else {
+ t->rpkts++;
writebit = 0;
}
@@ -156,29 +278,29 @@
/* mark all tracking fields and load out */
buf->nframesout += 1;
- buf->bufaddr += bcnt;
+ buf->bv_off += bcnt;
buf->bv_resid -= bcnt;
-/* printk(KERN_DEBUG "aoe: bv_resid=%ld\n", buf->bv_resid); */
buf->resid -= bcnt;
buf->sector += bcnt >> 9;
if (buf->resid == 0) {
d->inprocess = NULL;
} else if (buf->bv_resid == 0) {
- buf->bv++;
- WARN_ON(buf->bv->bv_len == 0);
- buf->bv_resid = buf->bv->bv_len;
- buf->bufaddr = page_address(buf->bv->bv_page) + buf->bv->bv_offset;
+ buf->bv = ++bv;
+ buf->bv_resid = bv->bv_len;
+ WARN_ON(buf->bv_resid == 0);
+ buf->bv_off = bv->bv_offset;
}
- skb->dev = d->ifp;
+ skb->dev = t->ifp->nd;
skb = skb_clone(skb, GFP_ATOMIC);
- if (skb == NULL)
- return;
- if (d->sendq_hd)
- d->sendq_tl->next = skb;
- else
- d->sendq_hd = skb;
- d->sendq_tl = skb;
+ if (skb) {
+ if (d->sendq_hd)
+ d->sendq_tl->next = skb;
+ else
+ d->sendq_hd = skb;
+ d->sendq_tl = skb;
+ }
+ return 1;
}
/* some callers cannot sleep, and they can call this function,
@@ -232,62 +354,8 @@
return sl;
}
-static struct frame *
-freeframe(struct aoedev *d)
-{
- struct frame *f, *e;
- int n = 0;
-
- f = d->frames;
- e = f + d->nframes;
- for (; f<e; f++) {
- if (f->tag != FREETAG)
- continue;
- if (atomic_read(&skb_shinfo(f->skb)->dataref) == 1) {
- skb_shinfo(f->skb)->nr_frags = f->skb->data_len = 0;
- skb_trim(f->skb, 0);
- return f;
- }
- n++;
- }
- if (n == d->nframes) /* wait for network layer */
- d->flags |= DEVFL_KICKME;
-
- return NULL;
-}
-
-/* enters with d->lock held */
-void
-aoecmd_work(struct aoedev *d)
-{
- struct frame *f;
- struct buf *buf;
-
- if (d->flags & DEVFL_PAUSE) {
- if (!aoedev_isbusy(d))
- d->sendq_hd = aoecmd_cfg_pkts(d->aoemajor,
- d->aoeminor, &d->sendq_tl);
- return;
- }
-
-loop:
- f = freeframe(d);
- if (f == NULL)
- return;
- if (d->inprocess == NULL) {
- if (list_empty(&d->bufq))
- return;
- buf = container_of(d->bufq.next, struct buf, bufs);
- list_del(d->bufq.next);
-/*printk(KERN_DEBUG "aoe: bi_size=%ld\n", buf->bio->bi_size); */
- d->inprocess = buf;
- }
- aoecmd_ata_rw(d, f);
- goto loop;
-}
-
static void
-rexmit(struct aoedev *d, struct frame *f)
+resend(struct aoedev *d, struct aoetgt *t, struct frame *f)
{
struct sk_buff *skb;
struct aoe_hdr *h;
@@ -295,41 +363,46 @@
char buf[128];
u32 n;
- n = newtag(d);
-
- snprintf(buf, sizeof buf,
- "%15s e%ld.%ld oldtag=%08x@%08lx newtag=%08x\n",
- "retransmit",
- d->aoemajor, d->aoeminor, f->tag, jiffies, n);
- aoechr_error(buf);
-
+ ifrotate(t);
+ n = newtag(t);
skb = f->skb;
h = (struct aoe_hdr *) skb_mac_header(skb);
ah = (struct aoe_atahdr *) (h+1);
+
+ snprintf(buf, sizeof buf,
+ "%15s e%ld.%d oldtag=%08x@%08lx newtag=%08x "
+ "s=%012llx d=%012llx nout=%d\n",
+ "retransmit", d->aoemajor, d->aoeminor, f->tag, jiffies, n,
+ mac_addr(h->src),
+ mac_addr(h->dst), t->nout);
+ aoechr_error(buf);
+
f->tag = n;
h->tag = cpu_to_be32(n);
- memcpy(h->dst, d->addr, sizeof h->dst);
- memcpy(h->src, d->ifp->dev_addr, sizeof h->src);
+ memcpy(h->dst, t->addr, sizeof h->dst);
+ memcpy(h->src, t->ifp->nd->dev_addr, sizeof h->src);
- n = DEFAULTBCNT / 512;
- if (ah->scnt > n) {
- ah->scnt = n;
+ switch (ah->cmdstat) {
+ default:
+ break;
+ case WIN_READ:
+ case WIN_READ_EXT:
+ case WIN_WRITE:
+ case WIN_WRITE_EXT:
+ put_lba(ah, f->lba);
+
+ n = f->bcnt;
+ if (n > DEFAULTBCNT)
+ n = DEFAULTBCNT;
+ ah->scnt = n >> 9;
if (ah->aflags & AOEAFL_WRITE) {
skb_fill_page_desc(skb, 0, virt_to_page(f->bufaddr),
- offset_in_page(f->bufaddr), DEFAULTBCNT);
- skb->len = sizeof *h + sizeof *ah + DEFAULTBCNT;
- skb->data_len = DEFAULTBCNT;
- }
- if (++d->lostjumbo > (d->nframes << 1))
- if (d->maxbcnt != DEFAULTBCNT) {
- printk(KERN_INFO "aoe: e%ld.%ld: too many lost jumbo on %s - using 1KB frames.\n",
- d->aoemajor, d->aoeminor, d->ifp->name);
- d->maxbcnt = DEFAULTBCNT;
- d->flags |= DEVFL_MAXBCNT;
+ offset_in_page(f->bufaddr), n);
+ skb->len = sizeof *h + sizeof *ah + n;
+ skb->data_len = n;
}
}
-
- skb->dev = d->ifp;
+ skb->dev = t->ifp->nd;
skb = skb_clone(skb, GFP_ATOMIC);
if (skb == NULL)
return;
@@ -352,10 +425,92 @@
return n;
}
+static struct aoeif *
+getif(struct aoetgt *t, struct net_device *nd)
+{
+ struct aoeif *p, *e;
+
+ p = t->ifs;
+ e = p + NAOEIFS;
+ for (; p < e; p++)
+ if (p->nd == nd)
+ return p;
+ return NULL;
+}
+
+static struct aoeif *
+addif(struct aoetgt *t, struct net_device *nd)
+{
+ struct aoeif *p;
+
+ p = getif(t, NULL);
+ if (!p)
+ return NULL;
+ p->nd = nd;
+ p->maxbcnt = DEFAULTBCNT;
+ p->lost = 0;
+ p->lostjumbo = 0;
+ return p;
+}
+
+static void
+ejectif(struct aoetgt *t, struct aoeif *ifp)
+{
+ struct aoeif *e;
+ ulong n;
+
+ e = t->ifs + NAOEIFS - 1;
+ n = (e - ifp) * sizeof *ifp;
+ memmove(ifp, ifp+1, n);
+ e->nd = NULL;
+}
+
+static int
+sthtith(struct aoedev *d)
+{
+ struct frame *f, *e, *nf;
+ struct sk_buff *skb;
+ struct aoetgt *ht = *d->htgt;
+
+ f = ht->frames;
+ e = f + ht->nframes;
+ for (; f < e; f++) {
+ if (f->tag == FREETAG)
+ continue;
+ nf = freeframe(d);
+ if (!nf)
+ return 0;
+ skb = nf->skb;
+ *nf = *f;
+ f->skb = skb;
+ f->tag = FREETAG;
+ nf->waited = 0;
+ ht->nout--;
+ (*d->tgt)->nout++;
+ resend(d, *d->tgt, nf);
+ }
+ /* he's clean, he's useless. take away his interfaces */
+ memset(ht->ifs, 0, sizeof ht->ifs);
+ d->htgt = NULL;
+ return 1;
+}
+
+static inline unsigned char
+ata_scnt(unsigned char *packet) {
+ struct aoe_hdr *h;
+ struct aoe_atahdr *ah;
+
+ h = (struct aoe_hdr *) packet;
+ ah = (struct aoe_atahdr *) (h+1);
+ return ah->scnt;
+}
+
static void
rexmit_timer(ulong vp)
{
struct aoedev *d;
+ struct aoetgt *t, **tt, **te;
+ struct aoeif *ifp;
struct frame *f, *e;
struct sk_buff *sl;
register long timeout;
@@ -374,31 +529,79 @@
spin_unlock_irqrestore(&d->lock, flags);
return;
}
- f = d->frames;
- e = f + d->nframes;
- for (; f<e; f++) {
- if (f->tag != FREETAG && tsince(f->tag) >= timeout) {
+ tt = d->targets;
+ te = tt + NTARGETS;
+ for (; tt < te && *tt; tt++) {
+ t = *tt;
+ f = t->frames;
+ e = f + t->nframes;
+ for (; f < e; f++) {
+ if (f->tag == FREETAG
+ || tsince(f->tag) < timeout)
+ continue;
n = f->waited += timeout;
n /= HZ;
- if (n > aoe_deadsecs) { /* waited too long for response */
+ if (n > aoe_deadsecs) {
+ /* waited too long. device failure. */
aoedev_downdev(d);
break;
}
- rexmit(d, f);
+
+ if (n > HELPWAIT /* see if another target can help */
+ && (tt != d->targets || d->targets[1]))
+ d->htgt = tt;
+
+ if (t->nout == t->maxout) {
+ if (t->maxout > 1)
+ t->maxout--;
+ t->lastwadj = jiffies;
+ }
+
+ ifp = getif(t, f->skb->dev);
+ if (ifp && ++ifp->lost > (t->nframes << 1)
+ && (ifp != t->ifs || t->ifs[1].nd)) {
+ ejectif(t, ifp);
+ ifp = NULL;
+ }
+
+ if (ata_scnt(skb_mac_header(f->skb)) > DEFAULTBCNT / 512
+ && ifp && ++ifp->lostjumbo > (t->nframes << 1)
+ && ifp->maxbcnt != DEFAULTBCNT) {
+ printk(KERN_INFO
+ "aoe: e%ld.%d: "
+ "too many lost jumbo on "
+ "%s:%012llx - "
+ "falling back to %d frames.\n",
+ d->aoemajor, d->aoeminor,
+ ifp->nd->name, mac_addr(t->addr),
+ DEFAULTBCNT);
+ ifp->maxbcnt = 0;
+ }
+ resend(d, t, f);
+ }
+
+ /* window check */
+ if (t->nout == t->maxout
+ && t->maxout < t->nframes
+ && (jiffies - t->lastwadj)/HZ > 10) {
+ t->maxout++;
+ t->lastwadj = jiffies;
}
}
- if (d->flags & DEVFL_KICKME) {
+
+ if (d->sendq_hd) {
+ n = d->rttavg <<= 1;
+ if (n > MAXTIMER)
+ d->rttavg = MAXTIMER;
+ }
+
+ if (d->flags & DEVFL_KICKME || d->htgt) {
d->flags &= ~DEVFL_KICKME;
aoecmd_work(d);
}
sl = d->sendq_hd;
d->sendq_hd = d->sendq_tl = NULL;
- if (sl) {
- n = d->rttavg <<= 1;
- if (n > MAXTIMER)
- d->rttavg = MAXTIMER;
- }
d->timer.expires = jiffies + TIMERTICK;
add_timer(&d->timer);
@@ -408,6 +611,25 @@
aoenet_xmit(sl);
}
+/* enters with d->lock held */
+void
+aoecmd_work(struct aoedev *d)
+{
+ struct buf *buf;
+loop:
+ if (d->htgt && !sthtith(d))
+ return;
+ if (d->inprocess == NULL) {
+ if (list_empty(&d->bufq))
+ return;
+ buf = container_of(d->bufq.next, struct buf, bufs);
+ list_del(d->bufq.next);
+ d->inprocess = buf;
+ }
+ if (aoecmd_ata_rw(d))
+ goto loop;
+}
+
/* this function performs work that has been deferred until sleeping is OK
*/
void
@@ -440,7 +662,7 @@
}
static void
-ataid_complete(struct aoedev *d, unsigned char *id)
+ataid_complete(struct aoedev *d, struct aoetgt *t, unsigned char *id)
{
u64 ssize;
u16 n;
@@ -475,24 +697,20 @@
}
if (d->ssize != ssize)
- printk(KERN_INFO "aoe: %012llx e%lu.%lu v%04x has %llu sectors\n",
- (unsigned long long)mac_addr(d->addr),
+ printk(KERN_INFO
+ "aoe: %012llx e%ld.%d v%04x has %llu sectors\n",
+ mac_addr(t->addr),
d->aoemajor, d->aoeminor,
d->fw_ver, (long long)ssize);
d->ssize = ssize;
d->geo.start = 0;
+ if (d->flags & (DEVFL_GDALLOC|DEVFL_NEWSIZE))
+ return;
if (d->gd != NULL) {
d->gd->capacity = ssize;
d->flags |= DEVFL_NEWSIZE;
- } else {
- if (d->flags & DEVFL_GDALLOC) {
- printk(KERN_ERR "aoe: can't schedule work for e%lu.%lu, %s\n",
- d->aoemajor, d->aoeminor,
- "it's already on! This shouldn't happen.\n");
- return;
- }
+ } else
d->flags |= DEVFL_GDALLOC;
- }
schedule_work(&d->work);
}
@@ -519,6 +737,31 @@
d->rttavg += n >> 2;
}
+static struct aoetgt *
+gettgt(struct aoedev *d, char *addr)
+{
+ struct aoetgt **t, **e;
+
+ t = d->targets;
+ e = t + NTARGETS;
+ for (; t < e && *t; t++)
+ if (memcmp((*t)->addr, addr, sizeof((*t)->addr)) == 0)
+ return *t;
+ return NULL;
+}
+
+static inline void
+diskstats(struct gendisk *disk, struct bio *bio, ulong duration)
+{
+ unsigned long n_sect = bio->bi_size >> 9;
+ const int rw = bio_data_dir(bio);
+
+ disk_stat_inc(disk, ios[rw]);
+ disk_stat_add(disk, ticks[rw], duration);
+ disk_stat_add(disk, sectors[rw], n_sect);
+ disk_stat_add(disk, io_ticks, duration);
+}
+
void
aoecmd_ata_rsp(struct sk_buff *skb)
{
@@ -528,6 +771,8 @@
struct frame *f;
struct buf *buf;
struct sk_buff *sl;
+ struct aoetgt *t;
+ struct aoeif *ifp;
register long n;
ulong flags;
char ebuf[128];
@@ -547,7 +792,14 @@
spin_lock_irqsave(&d->lock, flags);
n = be32_to_cpu(get_unaligned(&hin->tag));
- f = getframe(d, n);
+ t = gettgt(d, hin->src);
+ if (t == NULL) {
+ printk(KERN_INFO "aoe: can't find target e%ld.%d:%012llx\n",
+ d->aoemajor, d->aoeminor, mac_addr(hin->src));
+ spin_unlock_irqrestore(&d->lock, flags);
+ return;
+ }
+ f = getframe(t, n);
if (f == NULL) {
calc_rttavg(d, -tsince(n));
spin_unlock_irqrestore(&d->lock, flags);
@@ -569,24 +821,24 @@
ahout = (struct aoe_atahdr *) (hout+1);
buf = f->buf;
- if (ahout->cmdstat == WIN_IDENTIFY)
- d->flags &= ~DEVFL_PAUSE;
if (ahin->cmdstat & 0xa9) { /* these bits cleared on success */
printk(KERN_ERR
- "aoe: ata error cmd=%2.2Xh stat=%2.2Xh from e%ld.%ld\n",
+ "aoe: ata error cmd=%2.2Xh stat=%2.2Xh from e%ld.%d\n",
ahout->cmdstat, ahin->cmdstat,
d->aoemajor, d->aoeminor);
if (buf)
buf->flags |= BUFFL_FAIL;
} else {
+ if (d->htgt && t == *d->htgt) /* I'll help myself, thank you. */
+ d->htgt = NULL;
n = ahout->scnt << 9;
switch (ahout->cmdstat) {
case WIN_READ:
case WIN_READ_EXT:
if (skb->len - sizeof *hin - sizeof *ahin < n) {
printk(KERN_ERR
- "aoe: runt data size in read. skb->len=%d\n",
- skb->len);
+ "aoe: %s. skb->len=%d need=%ld\n",
+ "runt data size in read", skb->len, n);
/* fail frame f? just returning will rexmit. */
spin_unlock_irqrestore(&d->lock, flags);
return;
@@ -594,32 +846,18 @@
memcpy(f->bufaddr, ahin+1, n);
case WIN_WRITE:
case WIN_WRITE_EXT:
- if (f->bcnt -= n) {
- skb = f->skb;
- f->bufaddr += n;
- put_lba(ahout, f->lba += ahout->scnt);
- n = f->bcnt;
+ ifp = getif(t, skb->dev);
+ if (ifp) {
+ ifp->lost = 0;
if (n > DEFAULTBCNT)
- n = DEFAULTBCNT;
- ahout->scnt = n >> 9;
- if (ahout->aflags & AOEAFL_WRITE) {
- skb_fill_page_desc(skb, 0,
- virt_to_page(f->bufaddr),
- offset_in_page(f->bufaddr), n);
- skb->len = sizeof *hout + sizeof *ahout + n;
- skb->data_len = n;
- }
- f->tag = newtag(d);
- hout->tag = cpu_to_be32(f->tag);
- skb->dev = d->ifp;
- skb = skb_clone(skb, GFP_ATOMIC);
- spin_unlock_irqrestore(&d->lock, flags);
- if (skb)
- aoenet_xmit(skb);
- return;
+ ifp->lostjumbo = 0;
}
- if (n > DEFAULTBCNT)
- d->lostjumbo = 0;
+ if (f->bcnt -= n) {
+ f->lba += n >> 9;
+ f->bufaddr += n;
+ resend(d, t, f);
+ goto xmit;
+ }
break;
case WIN_IDENTIFY:
if (skb->len - sizeof *hin - sizeof *ahin < 512) {
@@ -629,7 +867,7 @@
spin_unlock_irqrestore(&d->lock, flags);
return;
}
- ataid_complete(d, (char *) (ahin+1));
+ ataid_complete(d, t, (char *) (ahin+1));
break;
default:
printk(KERN_INFO
@@ -640,28 +878,19 @@
}
}
- if (buf) {
- buf->nframesout -= 1;
- if (buf->nframesout == 0 && buf->resid == 0) {
- unsigned long duration = jiffies - buf->start_time;
- unsigned long n_sect = buf->bio->bi_size >> 9;
- struct gendisk *disk = d->gd;
- const int rw = bio_data_dir(buf->bio);
-
- disk_stat_inc(disk, ios[rw]);
- disk_stat_add(disk, ticks[rw], duration);
- disk_stat_add(disk, sectors[rw], n_sect);
- disk_stat_add(disk, io_ticks, duration);
- n = (buf->flags & BUFFL_FAIL) ? -EIO : 0;
- bio_endio(buf->bio, n);
- mempool_free(buf, d->bufpool);
- }
+ if (buf && --buf->nframesout == 0 && buf->resid == 0) {
+ diskstats(d->gd, buf->bio, jiffies - buf->stime);
+ n = (buf->flags & BUFFL_FAIL) ? -EIO : 0;
+ bio_endio(buf->bio, n);
+ mempool_free(buf, d->bufpool);
}
f->buf = NULL;
f->tag = FREETAG;
+ t->nout--;
aoecmd_work(d);
+xmit:
sl = d->sendq_hd;
d->sendq_hd = d->sendq_tl = NULL;
@@ -679,23 +908,20 @@
aoenet_xmit(sl);
}
-/*
- * Since we only call this in one place (and it only prepares one frame)
- * we just return the skb. Usually we'd chain it up to the aoedev sendq.
- */
-static struct sk_buff *
+struct sk_buff *
aoecmd_ata_id(struct aoedev *d)
{
struct aoe_hdr *h;
struct aoe_atahdr *ah;
struct frame *f;
struct sk_buff *skb;
+ struct aoetgt *t;
f = freeframe(d);
- if (f == NULL) {
- printk(KERN_ERR "aoe: can't get a frame. This shouldn't happen.\n");
+ if (f == NULL)
return NULL;
- }
+
+ t = *d->tgt;
/* initialize the headers & frame */
skb = f->skb;
@@ -703,7 +929,8 @@
ah = (struct aoe_atahdr *) (h+1);
skb_put(skb, sizeof *h + sizeof *ah);
memset(h, 0, skb->len);
- f->tag = aoehdr_atainit(d, h);
+ f->tag = aoehdr_atainit(d, t, h);
+ t->nout++;
f->waited = 0;
/* set up ata header */
@@ -711,7 +938,7 @@
ah->cmdstat = WIN_IDENTIFY;
ah->lba3 = 0xa0;
- skb->dev = d->ifp;
+ skb->dev = t->ifp->nd;
d->rttavg = MAXTIMER;
d->timer.function = rexmit_timer;
@@ -719,15 +946,52 @@
return skb_clone(skb, GFP_ATOMIC);
}
+static struct aoetgt *
+addtgt(struct aoedev *d, char *addr, ulong nframes)
+{
+ struct aoetgt *t, **tt, **te;
+ struct frame *f, *e;
+
+ tt = d->targets;
+ te = tt + NTARGETS;
+ for (; tt < te && *tt; tt++)
+ ;
+
+ if (tt == te) {
+ printk(KERN_INFO
+ "aoe: device addtgt failure; too many targets\n");
+ return NULL;
+ }
+ t = kcalloc(1, sizeof *t, GFP_ATOMIC);
+ f = kcalloc(nframes, sizeof *f, GFP_ATOMIC);
+ if (!t || !f) {
+ kfree(f);
+ kfree(t);
+ printk(KERN_INFO "aoe: cannot allocate memory to add target\n");
+ return NULL;
+ }
+
+ t->nframes = nframes;
+ t->frames = f;
+ e = f + nframes;
+ for (; f < e; f++)
+ f->tag = FREETAG;
+ memcpy(t->addr, addr, sizeof t->addr);
+ t->ifp = t->ifs;
+ t->maxout = t->nframes;
+ return *tt = t;
+}
+
void
aoecmd_cfg_rsp(struct sk_buff *skb)
{
struct aoedev *d;
struct aoe_hdr *h;
struct aoe_cfghdr *ch;
+ struct aoetgt *t;
+ struct aoeif *ifp;
ulong flags, sysminor, aoemajor;
struct sk_buff *sl;
- enum { MAXFRAMES = 16 };
u16 n;
h = (struct aoe_hdr *) skb_mac_header(skb);
@@ -752,10 +1016,10 @@
}
n = be16_to_cpu(ch->bufcnt);
- if (n > MAXFRAMES) /* keep it reasonable */
- n = MAXFRAMES;
+ if (n > aoe_maxout) /* keep it reasonable */
+ n = aoe_maxout;
- d = aoedev_by_sysminor_m(sysminor, n);
+ d = aoedev_by_sysminor_m(sysminor);
if (d == NULL) {
printk(KERN_INFO "aoe: device sysminor_m failure\n");
return;
@@ -763,38 +1027,74 @@
spin_lock_irqsave(&d->lock, flags);
- /* permit device to migrate mac and network interface */
- d->ifp = skb->dev;
- memcpy(d->addr, h->src, sizeof d->addr);
- if (!(d->flags & DEVFL_MAXBCNT)) {
- n = d->ifp->mtu;
+ t = gettgt(d, h->src);
+ if (!t) {
+ t = addtgt(d, h->src, n);
+ if (!t) {
+ spin_unlock_irqrestore(&d->lock, flags);
+ return;
+ }
+ }
+ ifp = getif(t, skb->dev);
+ if (!ifp) {
+ ifp = addif(t, skb->dev);
+ if (!ifp) {
+ printk(KERN_INFO
+ "aoe: device addif failure; "
+ "too many interfaces?\n");
+ spin_unlock_irqrestore(&d->lock, flags);
+ return;
+ }
+ }
+ if (ifp->maxbcnt) {
+ n = ifp->nd->mtu;
n -= sizeof (struct aoe_hdr) + sizeof (struct aoe_atahdr);
n /= 512;
if (n > ch->scnt)
n = ch->scnt;
n = n ? n * 512 : DEFAULTBCNT;
- if (n != d->maxbcnt) {
+ if (n != ifp->maxbcnt) {
printk(KERN_INFO
- "aoe: e%ld.%ld: setting %d byte data frames on %s\n",
- d->aoemajor, d->aoeminor, n, d->ifp->name);
- d->maxbcnt = n;
+ "aoe: e%ld.%d: setting %d%s%s:%012llx\n",
+ d->aoemajor, d->aoeminor, n,
+ " byte data frames on ", ifp->nd->name,
+ mac_addr(t->addr));
+ ifp->maxbcnt = n;
}
}
/* don't change users' perspective */
- if (d->nopen && !(d->flags & DEVFL_PAUSE)) {
+ if (d->nopen) {
spin_unlock_irqrestore(&d->lock, flags);
return;
}
- d->flags |= DEVFL_PAUSE; /* force pause */
- d->mintimer = MINTIMER;
d->fw_ver = be16_to_cpu(ch->fwver);
- /* check for already outstanding ataid */
- sl = aoedev_isbusy(d) == 0 ? aoecmd_ata_id(d) : NULL;
+ sl = aoecmd_ata_id(d);
spin_unlock_irqrestore(&d->lock, flags);
aoenet_xmit(sl);
}
+void
+aoecmd_cleanslate(struct aoedev *d)
+{
+ struct aoetgt **t, **te;
+ struct aoeif *p, *e;
+
+ d->mintimer = MINTIMER;
+
+ t = d->targets;
+ te = t + NTARGETS;
+ for (; t < te && *t; t++) {
+ (*t)->maxout = (*t)->nframes;
+ p = (*t)->ifs;
+ e = p + NAOEIFS;
+ for (; p < e; p++) {
+ p->lostjumbo = 0;
+ p->lost = 0;
+ p->maxbcnt = DEFAULTBCNT;
+ }
+ }
+}
diff --git a/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c
index 51f5071..f9a1cd9 100644
--- a/drivers/block/aoe/aoedev.c
+++ b/drivers/block/aoe/aoedev.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2006 Coraid, Inc. See COPYING for GPL terms. */
+/* Copyright (c) 2007 Coraid, Inc. See COPYING for GPL terms. */
/*
* aoedev.c
* AoE device utility functions; maintains device list.
@@ -7,23 +7,32 @@
#include <linux/hdreg.h>
#include <linux/blkdev.h>
#include <linux/netdevice.h>
+#include <linux/delay.h>
#include "aoe.h"
+static void dummy_timer(ulong);
+static void aoedev_freedev(struct aoedev *);
+static void freetgt(struct aoedev *d, struct aoetgt *t);
+static void skbpoolfree(struct aoedev *d);
+
static struct aoedev *devlist;
-static spinlock_t devlist_lock;
+static DEFINE_SPINLOCK(devlist_lock);
int
aoedev_isbusy(struct aoedev *d)
{
+ struct aoetgt **t, **te;
struct frame *f, *e;
- f = d->frames;
- e = f + d->nframes;
- do {
- if (f->tag != FREETAG)
- return 1;
- } while (++f < e);
-
+ t = d->targets;
+ te = t + NTARGETS;
+ for (; t < te && *t; t++) {
+ f = (*t)->frames;
+ e = f + (*t)->nframes;
+ for (; f < e; f++)
+ if (f->tag != FREETAG)
+ return 1;
+ }
return 0;
}
@@ -55,75 +64,41 @@
add_timer(&d->timer);
}
-/* called with devlist lock held */
-static struct aoedev *
-aoedev_newdev(ulong nframes)
-{
- struct aoedev *d;
- struct frame *f, *e;
-
- d = kzalloc(sizeof *d, GFP_ATOMIC);
- f = kcalloc(nframes, sizeof *f, GFP_ATOMIC);
- switch (!d || !f) {
- case 0:
- d->nframes = nframes;
- d->frames = f;
- e = f + nframes;
- for (; f<e; f++) {
- f->tag = FREETAG;
- f->skb = new_skb(ETH_ZLEN);
- if (!f->skb)
- break;
- }
- if (f == e)
- break;
- while (f > d->frames) {
- f--;
- dev_kfree_skb(f->skb);
- }
- default:
- if (f)
- kfree(f);
- if (d)
- kfree(d);
- return NULL;
- }
- INIT_WORK(&d->work, aoecmd_sleepwork);
- spin_lock_init(&d->lock);
- init_timer(&d->timer);
- d->timer.data = (ulong) d;
- d->timer.function = dummy_timer;
- d->timer.expires = jiffies + HZ;
- add_timer(&d->timer);
- d->bufpool = NULL; /* defer to aoeblk_gdalloc */
- INIT_LIST_HEAD(&d->bufq);
- d->next = devlist;
- devlist = d;
-
- return d;
-}
-
void
aoedev_downdev(struct aoedev *d)
{
+ struct aoetgt **t, **te;
struct frame *f, *e;
struct buf *buf;
struct bio *bio;
- f = d->frames;
- e = f + d->nframes;
- for (; f<e; f->tag = FREETAG, f->buf = NULL, f++) {
- if (f->tag == FREETAG || f->buf == NULL)
- continue;
- buf = f->buf;
- bio = buf->bio;
- if (--buf->nframesout == 0) {
- mempool_free(buf, d->bufpool);
- bio_endio(bio, -EIO);
+ t = d->targets;
+ te = t + NTARGETS;
+ for (; t < te && *t; t++) {
+ f = (*t)->frames;
+ e = f + (*t)->nframes;
+ for (; f < e; f->tag = FREETAG, f->buf = NULL, f++) {
+ if (f->tag == FREETAG || f->buf == NULL)
+ continue;
+ buf = f->buf;
+ bio = buf->bio;
+ if (--buf->nframesout == 0
+ && buf != d->inprocess) {
+ mempool_free(buf, d->bufpool);
+ bio_endio(bio, -EIO);
+ }
}
- skb_shinfo(f->skb)->nr_frags = f->skb->data_len = 0;
+ (*t)->maxout = (*t)->nframes;
+ (*t)->nout = 0;
+ }
+ buf = d->inprocess;
+ if (buf) {
+ bio = buf->bio;
+ mempool_free(buf, d->bufpool);
+ bio_endio(bio, -EIO);
}
d->inprocess = NULL;
+ d->htgt = NULL;
while (!list_empty(&d->bufq)) {
buf = container_of(d->bufq.next, struct buf, bufs);
@@ -136,12 +111,114 @@
if (d->gd)
d->gd->capacity = 0;
- d->flags &= ~(DEVFL_UP | DEVFL_PAUSE);
+ d->flags &= ~DEVFL_UP;
+}
+
+static void
+aoedev_freedev(struct aoedev *d)
+{
+ struct aoetgt **t, **e;
+
+ if (d->gd) {
+ aoedisk_rm_sysfs(d);
+ del_gendisk(d->gd);
+ put_disk(d->gd);
+ }
+ t = d->targets;
+ e = t + NTARGETS;
+ for (; t < e && *t; t++)
+ freetgt(d, *t);
+ if (d->bufpool)
+ mempool_destroy(d->bufpool);
+ skbpoolfree(d);
+ kfree(d);
+}
+
+int
+aoedev_flush(const char __user *str, size_t cnt)
+{
+ ulong flags;
+ struct aoedev *d, **dd;
+ struct aoedev *rmd = NULL;
+ char buf[16];
+ int all = 0;
+
+ if (cnt >= 3) {
+ if (cnt > sizeof buf)
+ cnt = sizeof buf;
+ if (copy_from_user(buf, str, cnt))
+ return -EFAULT;
+ all = !strncmp(buf, "all", 3);
+ }
+
+ flush_scheduled_work();
+ spin_lock_irqsave(&devlist_lock, flags);
+ dd = &devlist;
+ while ((d = *dd)) {
+ spin_lock(&d->lock);
+ if ((!all && (d->flags & DEVFL_UP))
+ || (d->flags & (DEVFL_GDALLOC|DEVFL_NEWSIZE))
+ || d->nopen) {
+ spin_unlock(&d->lock);
+ dd = &d->next;
+ continue;
+ }
+ *dd = d->next;
+ aoedev_downdev(d);
+ d->flags |= DEVFL_TKILL;
+ spin_unlock(&d->lock);
+ d->next = rmd;
+ rmd = d;
+ }
+ spin_unlock_irqrestore(&devlist_lock, flags);
+ while ((d = rmd)) {
+ rmd = d->next;
+ del_timer_sync(&d->timer);
+ aoedev_freedev(d); /* must be able to sleep */
+ }
+ return 0;
+}
+
+/* I'm not really sure that this is a realistic problem, but if the
+network driver goes gonzo let's just leak memory after complaining. */
+static void
+skbfree(struct sk_buff *skb)
+{
+ enum { Sms = 100, Tms = 3*1000};
+ int i = Tms / Sms;
+
+ if (skb == NULL)
+ return;
+ while (atomic_read(&skb_shinfo(skb)->dataref) != 1 && i-- > 0)
+ msleep(Sms);
+ if (i <= 0) {
+ printk(KERN_ERR
+ "aoe: %s holds ref: %s\n",
+ skb->dev ? skb->dev->name : "netif",
+ "cannot free skb -- memory leaked.");
+ return;
+ }
+ skb_shinfo(skb)->nr_frags = skb->data_len = 0;
+ skb_trim(skb, 0);
+ dev_kfree_skb(skb);
+}
+
+static void
+skbpoolfree(struct aoedev *d)
+{
+ struct sk_buff *skb;
+
+ while ((skb = d->skbpool_hd)) {
+ d->skbpool_hd = skb->next;
+ skb->next = NULL;
+ skbfree(skb);
+ }
+ d->skbpool_tl = NULL;
}
/* find it or malloc it */
struct aoedev *
-aoedev_by_sysminor_m(ulong sysminor, ulong bufcnt)
+aoedev_by_sysminor_m(ulong sysminor)
{
struct aoedev *d;
ulong flags;
@@ -151,43 +228,43 @@
for (d=devlist; d; d=d->next)
if (d->sysminor == sysminor)
break;
-
- if (d == NULL) {
- d = aoedev_newdev(bufcnt);
- if (d == NULL) {
- spin_unlock_irqrestore(&devlist_lock, flags);
- printk(KERN_INFO "aoe: aoedev_newdev failure.\n");
- return NULL;
- }
- d->sysminor = sysminor;
- d->aoemajor = AOEMAJOR(sysminor);
- d->aoeminor = AOEMINOR(sysminor);
- }
-
+ if (d)
+ goto out;
+ d = kcalloc(1, sizeof *d, GFP_ATOMIC);
+ if (!d)
+ goto out;
+ INIT_WORK(&d->work, aoecmd_sleepwork);
+ spin_lock_init(&d->lock);
+ init_timer(&d->timer);
+ d->timer.data = (ulong) d;
+ d->timer.function = dummy_timer;
+ d->timer.expires = jiffies + HZ;
+ add_timer(&d->timer);
+ d->bufpool = NULL; /* defer to aoeblk_gdalloc */
+ d->tgt = d->targets;
+ INIT_LIST_HEAD(&d->bufq);
+ d->sysminor = sysminor;
+ d->aoemajor = AOEMAJOR(sysminor);
+ d->aoeminor = AOEMINOR(sysminor);
+ d->mintimer = MINTIMER;
+ d->next = devlist;
+ devlist = d;
+ out:
spin_unlock_irqrestore(&devlist_lock, flags);
return d;
}
static void
-aoedev_freedev(struct aoedev *d)
+freetgt(struct aoedev *d, struct aoetgt *t)
{
struct frame *f, *e;
- if (d->gd) {
- aoedisk_rm_sysfs(d);
- del_gendisk(d->gd);
- put_disk(d->gd);
- }
- f = d->frames;
- e = f + d->nframes;
- for (; f<e; f++) {
- skb_shinfo(f->skb)->nr_frags = 0;
- dev_kfree_skb(f->skb);
- }
- kfree(d->frames);
- if (d->bufpool)
- mempool_destroy(d->bufpool);
- kfree(d);
+ f = t->frames;
+ e = f + t->nframes;
+ for (; f < e; f++)
+ skbfree(f->skb);
+ kfree(t->frames);
+ kfree(t);
}
void
@@ -214,7 +291,5 @@
int __init
aoedev_init(void)
{
- spin_lock_init(&devlist_lock);
return 0;
}
-
diff --git a/drivers/block/aoe/aoemain.c b/drivers/block/aoe/aoemain.c
index a04b7d6..7b15a5e 100644
--- a/drivers/block/aoe/aoemain.c
+++ b/drivers/block/aoe/aoemain.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2006 Coraid, Inc. See COPYING for GPL terms. */
+/* Copyright (c) 2007 Coraid, Inc. See COPYING for GPL terms. */
/*
* aoemain.c
* Module initialization routines, discover timer
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index 4e6deb7..8460ef7 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2006 Coraid, Inc. See COPYING for GPL terms. */
+/* Copyright (c) 2007 Coraid, Inc. See COPYING for GPL terms. */
/*
* aoenet.c
* Ethernet portion of AoE driver
@@ -83,7 +83,7 @@
return 0;
}
-u64
+unsigned long long
mac_addr(char addr[6])
{
__be64 n = 0;
@@ -91,7 +91,7 @@
memcpy(p + 2, addr, 6); /* (sizeof addr != 6) */
- return __be64_to_cpu(n);
+ return (unsigned long long) __be64_to_cpu(n);
}
void
@@ -137,9 +137,12 @@
if (n > NECODES)
n = 0;
if (net_ratelimit())
- printk(KERN_ERR "aoe: error packet from %d.%d; ecode=%d '%s'\n",
- be16_to_cpu(get_unaligned(&h->major)), h->minor,
- h->err, aoe_errlist[n]);
+ printk(KERN_ERR
+ "%s%d.%d@%s; ecode=%d '%s'\n",
+ "aoe: error packet from ",
+ be16_to_cpu(get_unaligned(&h->major)),
+ h->minor, skb->dev->name,
+ h->err, aoe_errlist[n]);
goto exit;
}
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
new file mode 100644
index 0000000..8536480
--- /dev/null
+++ b/drivers/block/brd.c
@@ -0,0 +1,583 @@
+/*
+ * Ram backed block device driver.
+ *
+ * Copyright (C) 2007 Nick Piggin
+ * Copyright (C) 2007 Novell Inc.
+ *
+ * Parts derived from drivers/block/rd.c, and drivers/block/loop.c, copyright
+ * of their respective owners.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/bio.h>
+#include <linux/highmem.h>
+#include <linux/gfp.h>
+#include <linux/radix-tree.h>
+#include <linux/buffer_head.h> /* invalidate_bh_lrus() */
+
+#include <asm/uaccess.h>
+
+#define SECTOR_SHIFT 9
+#define PAGE_SECTORS_SHIFT (PAGE_SHIFT - SECTOR_SHIFT)
+#define PAGE_SECTORS (1 << PAGE_SECTORS_SHIFT)
+
+/*
+ * Each block ramdisk device has a radix_tree brd_pages of pages that stores
+ * the pages containing the block device's contents. A brd page's ->index is
+ * its offset in PAGE_SIZE units. This is similar to, but in no way connected
+ * with, the kernel's pagecache or buffer cache (which sit above our block
+ * device).
+ */
+struct brd_device {
+ int brd_number;
+ int brd_refcnt;
+ loff_t brd_offset;
+ loff_t brd_sizelimit;
+ unsigned brd_blocksize;
+
+ struct request_queue *brd_queue;
+ struct gendisk *brd_disk;
+ struct list_head brd_list;
+
+ /*
+ * Backing store of pages and lock to protect it. This is the contents
+ * of the block device.
+ */
+ spinlock_t brd_lock;
+ struct radix_tree_root brd_pages;
+};
+
+/*
+ * Look up and return a brd's page for a given sector.
+ */
+static struct page *brd_lookup_page(struct brd_device *brd, sector_t sector)
+{
+ pgoff_t idx;
+ struct page *page;
+
+ /*
+ * The page lifetime is protected by the fact that we have opened the
+ * device node -- brd pages will never be deleted under us, so we
+ * don't need any further locking or refcounting.
+ *
+ * This is strictly true for the radix-tree nodes as well (ie. we
+ * don't actually need the rcu_read_lock()), however that is not a
+ * documented feature of the radix-tree API so it is better to be
+ * safe here (we don't have total exclusion from radix tree updates
+ * here, only deletes).
+ */
+ rcu_read_lock();
+ idx = sector >> PAGE_SECTORS_SHIFT; /* sector to page index */
+ page = radix_tree_lookup(&brd->brd_pages, idx);
+ rcu_read_unlock();
+
+ BUG_ON(page && page->index != idx);
+
+ return page;
+}
+
+/*
+ * Look up and return a brd's page for a given sector.
+ * If one does not exist, allocate an empty page, and insert that. Then
+ * return it.
+ */
+static struct page *brd_insert_page(struct brd_device *brd, sector_t sector)
+{
+ pgoff_t idx;
+ struct page *page;
+ gfp_t gfp_flags;
+
+ page = brd_lookup_page(brd, sector);
+ if (page)
+ return page;
+
+ /*
+ * Must use NOIO because we don't want to recurse back into the
+ * block or filesystem layers from page reclaim.
+ *
+ * Cannot support XIP and highmem, because our ->direct_access
+ * routine for XIP must return memory that is always addressable.
+ * If XIP was reworked to use pfns and kmap throughout, this
+ * restriction might be able to be lifted.
+ */
+ gfp_flags = GFP_NOIO | __GFP_ZERO;
+#ifndef CONFIG_BLK_DEV_XIP
+ gfp_flags |= __GFP_HIGHMEM;
+#endif
+ page = alloc_page(GFP_NOIO | __GFP_HIGHMEM | __GFP_ZERO);
+ if (!page)
+ return NULL;
+
+ if (radix_tree_preload(GFP_NOIO)) {
+ __free_page(page);
+ return NULL;
+ }
+
+ spin_lock(&brd->brd_lock);
+ idx = sector >> PAGE_SECTORS_SHIFT;
+ if (radix_tree_insert(&brd->brd_pages, idx, page)) {
+ __free_page(page);
+ page = radix_tree_lookup(&brd->brd_pages, idx);
+ BUG_ON(!page);
+ BUG_ON(page->index != idx);
+ } else
+ page->index = idx;
+ spin_unlock(&brd->brd_lock);
+
+ radix_tree_preload_end();
+
+ return page;
+}
+
+/*
+ * Free all backing store pages and radix tree. This must only be called when
+ * there are no other users of the device.
+ */
+#define FREE_BATCH 16
+static void brd_free_pages(struct brd_device *brd)
+{
+ unsigned long pos = 0;
+ struct page *pages[FREE_BATCH];
+ int nr_pages;
+
+ do {
+ int i;
+
+ nr_pages = radix_tree_gang_lookup(&brd->brd_pages,
+ (void **)pages, pos, FREE_BATCH);
+
+ for (i = 0; i < nr_pages; i++) {
+ void *ret;
+
+ BUG_ON(pages[i]->index < pos);
+ pos = pages[i]->index;
+ ret = radix_tree_delete(&brd->brd_pages, pos);
+ BUG_ON(!ret || ret != pages[i]);
+ __free_page(pages[i]);
+ }
+
+ pos++;
+
+ /*
+ * This assumes radix_tree_gang_lookup always returns as
+ * many pages as possible. If the radix-tree code changes,
+ * so will this have to.
+ */
+ } while (nr_pages == FREE_BATCH);
+}
+
+/*
+ * copy_to_brd_setup must be called before copy_to_brd. It may sleep.
+ */
+static int copy_to_brd_setup(struct brd_device *brd, sector_t sector, size_t n)
+{
+ unsigned int offset = (sector & (PAGE_SECTORS-1)) << SECTOR_SHIFT;
+ size_t copy;
+
+ copy = min_t(size_t, n, PAGE_SIZE - offset);
+ if (!brd_insert_page(brd, sector))
+ return -ENOMEM;
+ if (copy < n) {
+ sector += copy >> SECTOR_SHIFT;
+ if (!brd_insert_page(brd, sector))
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/*
+ * Copy n bytes from src to the brd starting at sector. Does not sleep.
+ */
+static void copy_to_brd(struct brd_device *brd, const void *src,
+ sector_t sector, size_t n)
+{
+ struct page *page;
+ void *dst;
+ unsigned int offset = (sector & (PAGE_SECTORS-1)) << SECTOR_SHIFT;
+ size_t copy;
+
+ copy = min_t(size_t, n, PAGE_SIZE - offset);
+ page = brd_lookup_page(brd, sector);
+ BUG_ON(!page);
+
+ dst = kmap_atomic(page, KM_USER1);
+ memcpy(dst + offset, src, copy);
+ kunmap_atomic(dst, KM_USER1);
+
+ if (copy < n) {
+ src += copy;
+ sector += copy >> SECTOR_SHIFT;
+ copy = n - copy;
+ page = brd_lookup_page(brd, sector);
+ BUG_ON(!page);
+
+ dst = kmap_atomic(page, KM_USER1);
+ memcpy(dst, src, copy);
+ kunmap_atomic(dst, KM_USER1);
+ }
+}
+
+/*
+ * Copy n bytes to dst from the brd starting at sector. Does not sleep.
+ */
+static void copy_from_brd(void *dst, struct brd_device *brd,
+ sector_t sector, size_t n)
+{
+ struct page *page;
+ void *src;
+ unsigned int offset = (sector & (PAGE_SECTORS-1)) << SECTOR_SHIFT;
+ size_t copy;
+
+ copy = min_t(size_t, n, PAGE_SIZE - offset);
+ page = brd_lookup_page(brd, sector);
+ if (page) {
+ src = kmap_atomic(page, KM_USER1);
+ memcpy(dst, src + offset, copy);
+ kunmap_atomic(src, KM_USER1);
+ } else
+ memset(dst, 0, copy);
+
+ if (copy < n) {
+ dst += copy;
+ sector += copy >> SECTOR_SHIFT;
+ copy = n - copy;
+ page = brd_lookup_page(brd, sector);
+ if (page) {
+ src = kmap_atomic(page, KM_USER1);
+ memcpy(dst, src, copy);
+ kunmap_atomic(src, KM_USER1);
+ } else
+ memset(dst, 0, copy);
+ }
+}
+
+/*
+ * Process a single bvec of a bio.
+ */
+static int brd_do_bvec(struct brd_device *brd, struct page *page,
+ unsigned int len, unsigned int off, int rw,
+ sector_t sector)
+{
+ void *mem;
+ int err = 0;
+
+ if (rw != READ) {
+ err = copy_to_brd_setup(brd, sector, len);
+ if (err)
+ goto out;
+ }
+
+ mem = kmap_atomic(page, KM_USER0);
+ if (rw == READ) {
+ copy_from_brd(mem + off, brd, sector, len);
+ flush_dcache_page(page);
+ } else
+ copy_to_brd(brd, mem + off, sector, len);
+ kunmap_atomic(mem, KM_USER0);
+
+out:
+ return err;
+}
+
+static int brd_make_request(struct request_queue *q, struct bio *bio)
+{
+ struct block_device *bdev = bio->bi_bdev;
+ struct brd_device *brd = bdev->bd_disk->private_data;
+ int rw;
+ struct bio_vec *bvec;
+ sector_t sector;
+ int i;
+ int err = -EIO;
+
+ sector = bio->bi_sector;
+ if (sector + (bio->bi_size >> SECTOR_SHIFT) >
+ get_capacity(bdev->bd_disk))
+ goto out;
+
+ rw = bio_rw(bio);
+ if (rw == READA)
+ rw = READ;
+
+ bio_for_each_segment(bvec, bio, i) {
+ unsigned int len = bvec->bv_len;
+ err = brd_do_bvec(brd, bvec->bv_page, len,
+ bvec->bv_offset, rw, sector);
+ if (err)
+ break;
+ sector += len >> SECTOR_SHIFT;
+ }
+
+out:
+ bio_endio(bio, err);
+
+ return 0;
+}
+
+#ifdef CONFIG_BLK_DEV_XIP
+static int brd_direct_access (struct block_device *bdev, sector_t sector,
+ unsigned long *data)
+{
+ struct brd_device *brd = bdev->bd_disk->private_data;
+ struct page *page;
+
+ if (!brd)
+ return -ENODEV;
+ if (sector & (PAGE_SECTORS-1))
+ return -EINVAL;
+ if (sector + PAGE_SECTORS > get_capacity(bdev->bd_disk))
+ return -ERANGE;
+ page = brd_insert_page(brd, sector);
+ if (!page)
+ return -ENOMEM;
+ *data = (unsigned long)page_address(page);
+
+ return 0;
+}
+#endif
+
+static int brd_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int error;
+ struct block_device *bdev = inode->i_bdev;
+ struct brd_device *brd = bdev->bd_disk->private_data;
+
+ if (cmd != BLKFLSBUF)
+ return -ENOTTY;
+
+ /*
+ * ram device BLKFLSBUF has special semantics, we want to actually
+ * release and destroy the ramdisk data.
+ */
+ mutex_lock(&bdev->bd_mutex);
+ error = -EBUSY;
+ if (bdev->bd_openers <= 1) {
+ /*
+ * Invalidate the cache first, so it isn't written
+ * back to the device.
+ *
+ * Another thread might instantiate more buffercache here,
+ * but there is not much we can do to close that race.
+ */
+ invalidate_bh_lrus();
+ truncate_inode_pages(bdev->bd_inode->i_mapping, 0);
+ brd_free_pages(brd);
+ error = 0;
+ }
+ mutex_unlock(&bdev->bd_mutex);
+
+ return error;
+}
+
+static struct block_device_operations brd_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = brd_ioctl,
+#ifdef CONFIG_BLK_DEV_XIP
+ .direct_access = brd_direct_access,
+#endif
+};
+
+/*
+ * And now the modules code and kernel interface.
+ */
+static int rd_nr;
+int rd_size = CONFIG_BLK_DEV_RAM_SIZE;
+module_param(rd_nr, int, 0);
+MODULE_PARM_DESC(rd_nr, "Maximum number of brd devices");
+module_param(rd_size, int, 0);
+MODULE_PARM_DESC(rd_size, "Size of each RAM disk in kbytes.");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR);
+
+#ifndef MODULE
+/* Legacy boot options - nonmodular */
+static int __init ramdisk_size(char *str)
+{
+ rd_size = simple_strtol(str, NULL, 0);
+ return 1;
+}
+static int __init ramdisk_size2(char *str)
+{
+ return ramdisk_size(str);
+}
+__setup("ramdisk=", ramdisk_size);
+__setup("ramdisk_size=", ramdisk_size2);
+#endif
+
+/*
+ * The device scheme is derived from loop.c. Keep them in synch where possible
+ * (should share code eventually).
+ */
+static LIST_HEAD(brd_devices);
+static DEFINE_MUTEX(brd_devices_mutex);
+
+static struct brd_device *brd_alloc(int i)
+{
+ struct brd_device *brd;
+ struct gendisk *disk;
+
+ brd = kzalloc(sizeof(*brd), GFP_KERNEL);
+ if (!brd)
+ goto out;
+ brd->brd_number = i;
+ spin_lock_init(&brd->brd_lock);
+ INIT_RADIX_TREE(&brd->brd_pages, GFP_ATOMIC);
+
+ brd->brd_queue = blk_alloc_queue(GFP_KERNEL);
+ if (!brd->brd_queue)
+ goto out_free_dev;
+ blk_queue_make_request(brd->brd_queue, brd_make_request);
+ blk_queue_max_sectors(brd->brd_queue, 1024);
+ blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
+
+ disk = brd->brd_disk = alloc_disk(1);
+ if (!disk)
+ goto out_free_queue;
+ disk->major = RAMDISK_MAJOR;
+ disk->first_minor = i;
+ disk->fops = &brd_fops;
+ disk->private_data = brd;
+ disk->queue = brd->brd_queue;
+ sprintf(disk->disk_name, "ram%d", i);
+ set_capacity(disk, rd_size * 2);
+
+ return brd;
+
+out_free_queue:
+ blk_cleanup_queue(brd->brd_queue);
+out_free_dev:
+ kfree(brd);
+out:
+ return NULL;
+}
+
+static void brd_free(struct brd_device *brd)
+{
+ put_disk(brd->brd_disk);
+ blk_cleanup_queue(brd->brd_queue);
+ brd_free_pages(brd);
+ kfree(brd);
+}
+
+static struct brd_device *brd_init_one(int i)
+{
+ struct brd_device *brd;
+
+ list_for_each_entry(brd, &brd_devices, brd_list) {
+ if (brd->brd_number == i)
+ goto out;
+ }
+
+ brd = brd_alloc(i);
+ if (brd) {
+ add_disk(brd->brd_disk);
+ list_add_tail(&brd->brd_list, &brd_devices);
+ }
+out:
+ return brd;
+}
+
+static void brd_del_one(struct brd_device *brd)
+{
+ list_del(&brd->brd_list);
+ del_gendisk(brd->brd_disk);
+ brd_free(brd);
+}
+
+static struct kobject *brd_probe(dev_t dev, int *part, void *data)
+{
+ struct brd_device *brd;
+ struct kobject *kobj;
+
+ mutex_lock(&brd_devices_mutex);
+ brd = brd_init_one(dev & MINORMASK);
+ kobj = brd ? get_disk(brd->brd_disk) : ERR_PTR(-ENOMEM);
+ mutex_unlock(&brd_devices_mutex);
+
+ *part = 0;
+ return kobj;
+}
+
+static int __init brd_init(void)
+{
+ int i, nr;
+ unsigned long range;
+ struct brd_device *brd, *next;
+
+ /*
+ * brd module now has a feature to instantiate underlying device
+ * structure on-demand, provided that there is an access dev node.
+ * However, this will not work well with user space tool that doesn't
+ * know about such "feature". In order to not break any existing
+ * tool, we do the following:
+ *
+ * (1) if rd_nr is specified, create that many upfront, and this
+ * also becomes a hard limit.
+ * (2) if rd_nr is not specified, create 1 rd device on module
+ * load, user can further extend brd device by create dev node
+ * themselves and have kernel automatically instantiate actual
+ * device on-demand.
+ */
+ if (rd_nr > 1UL << MINORBITS)
+ return -EINVAL;
+
+ if (rd_nr) {
+ nr = rd_nr;
+ range = rd_nr;
+ } else {
+ nr = CONFIG_BLK_DEV_RAM_COUNT;
+ range = 1UL << MINORBITS;
+ }
+
+ if (register_blkdev(RAMDISK_MAJOR, "ramdisk"))
+ return -EIO;
+
+ for (i = 0; i < nr; i++) {
+ brd = brd_alloc(i);
+ if (!brd)
+ goto out_free;
+ list_add_tail(&brd->brd_list, &brd_devices);
+ }
+
+ /* point of no return */
+
+ list_for_each_entry(brd, &brd_devices, brd_list)
+ add_disk(brd->brd_disk);
+
+ blk_register_region(MKDEV(RAMDISK_MAJOR, 0), range,
+ THIS_MODULE, brd_probe, NULL, NULL);
+
+ printk(KERN_INFO "brd: module loaded\n");
+ return 0;
+
+out_free:
+ list_for_each_entry_safe(brd, next, &brd_devices, brd_list) {
+ list_del(&brd->brd_list);
+ brd_free(brd);
+ }
+
+ unregister_blkdev(RAMDISK_MAJOR, "brd");
+ return -ENOMEM;
+}
+
+static void __exit brd_exit(void)
+{
+ unsigned long range;
+ struct brd_device *brd, *next;
+
+ range = rd_nr ? rd_nr : 1UL << MINORBITS;
+
+ list_for_each_entry_safe(brd, next, &brd_devices, brd_list)
+ brd_del_one(brd);
+
+ blk_unregister_region(MKDEV(RAMDISK_MAJOR, 0), range);
+ unregister_blkdev(RAMDISK_MAJOR, "ramdisk");
+}
+
+module_init(brd_init);
+module_exit(brd_exit);
+
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index ae31060..018753c 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -54,7 +54,7 @@
#endif /* NDEBUG */
static unsigned int nbds_max = 16;
-static struct nbd_device nbd_dev[MAX_NBD];
+static struct nbd_device *nbd_dev;
/*
* Use just one lock (or at most 1 per NIC). Two arguments for this:
@@ -649,11 +649,9 @@
BUILD_BUG_ON(sizeof(struct nbd_request) != 28);
- if (nbds_max > MAX_NBD) {
- printk(KERN_CRIT "nbd: cannot allocate more than %u nbds; %u requested.\n", MAX_NBD,
- nbds_max);
- return -EINVAL;
- }
+ nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
+ if (!nbd_dev)
+ return -ENOMEM;
for (i = 0; i < nbds_max; i++) {
struct gendisk *disk = alloc_disk(1);
diff --git a/drivers/block/rd.c b/drivers/block/rd.c
deleted file mode 100644
index 06e23be..0000000
--- a/drivers/block/rd.c
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * ramdisk.c - Multiple RAM disk driver - gzip-loading version - v. 0.8 beta.
- *
- * (C) Chad Page, Theodore Ts'o, et. al, 1995.
- *
- * This RAM disk is designed to have filesystems created on it and mounted
- * just like a regular floppy disk.
- *
- * It also does something suggested by Linus: use the buffer cache as the
- * RAM disk data. This makes it possible to dynamically allocate the RAM disk
- * buffer - with some consequences I have to deal with as I write this.
- *
- * This code is based on the original ramdisk.c, written mostly by
- * Theodore Ts'o (TYT) in 1991. The code was largely rewritten by
- * Chad Page to use the buffer cache to store the RAM disk data in
- * 1995; Theodore then took over the driver again, and cleaned it up
- * for inclusion in the mainline kernel.
- *
- * The original CRAMDISK code was written by Richard Lyons, and
- * adapted by Chad Page to use the new RAM disk interface. Theodore
- * Ts'o rewrote it so that both the compressed RAM disk loader and the
- * kernel decompressor uses the same inflate.c codebase. The RAM disk
- * loader now also loads into a dynamic (buffer cache based) RAM disk,
- * not the old static RAM disk. Support for the old static RAM disk has
- * been completely removed.
- *
- * Loadable module support added by Tom Dyas.
- *
- * Further cleanups by Chad Page (page0588@sundance.sjsu.edu):
- * Cosmetic changes in #ifdef MODULE, code movement, etc.
- * When the RAM disk module is removed, free the protected buffers
- * Default RAM disk size changed to 2.88 MB
- *
- * Added initrd: Werner Almesberger & Hans Lermen, Feb '96
- *
- * 4/25/96 : Made RAM disk size a parameter (default is now 4 MB)
- * - Chad Page
- *
- * Add support for fs images split across >1 disk, Paul Gortmaker, Mar '98
- *
- * Make block size and block size shift for RAM disks a global macro
- * and set blk_size for -ENOSPC, Werner Fink <werner@suse.de>, Apr '99
- */
-
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <asm/atomic.h>
-#include <linux/bio.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <linux/blkdev.h>
-#include <linux/genhd.h>
-#include <linux/buffer_head.h> /* for invalidate_bdev() */
-#include <linux/backing-dev.h>
-#include <linux/blkpg.h>
-#include <linux/writeback.h>
-#include <linux/log2.h>
-
-#include <asm/uaccess.h>
-
-/* Various static variables go here. Most are used only in the RAM disk code.
- */
-
-static struct gendisk *rd_disks[CONFIG_BLK_DEV_RAM_COUNT];
-static struct block_device *rd_bdev[CONFIG_BLK_DEV_RAM_COUNT];/* Protected device data */
-static struct request_queue *rd_queue[CONFIG_BLK_DEV_RAM_COUNT];
-
-/*
- * Parameters for the boot-loading of the RAM disk. These are set by
- * init/main.c (from arguments to the kernel command line) or from the
- * architecture-specific setup routine (from the stored boot sector
- * information).
- */
-int rd_size = CONFIG_BLK_DEV_RAM_SIZE; /* Size of the RAM disks */
-/*
- * It would be very desirable to have a soft-blocksize (that in the case
- * of the ramdisk driver is also the hardblocksize ;) of PAGE_SIZE because
- * doing that we'll achieve a far better MM footprint. Using a rd_blocksize of
- * BLOCK_SIZE in the worst case we'll make PAGE_SIZE/BLOCK_SIZE buffer-pages
- * unfreeable. With a rd_blocksize of PAGE_SIZE instead we are sure that only
- * 1 page will be protected. Depending on the size of the ramdisk you
- * may want to change the ramdisk blocksize to achieve a better or worse MM
- * behaviour. The default is still BLOCK_SIZE (needed by rd_load_image that
- * supposes the filesystem in the image uses a BLOCK_SIZE blocksize).
- */
-static int rd_blocksize = CONFIG_BLK_DEV_RAM_BLOCKSIZE;
-
-/*
- * Copyright (C) 2000 Linus Torvalds.
- * 2000 Transmeta Corp.
- * aops copied from ramfs.
- */
-
-/*
- * If a ramdisk page has buffers, some may be uptodate and some may be not.
- * To bring the page uptodate we zero out the non-uptodate buffers. The
- * page must be locked.
- */
-static void make_page_uptodate(struct page *page)
-{
- if (page_has_buffers(page)) {
- struct buffer_head *bh = page_buffers(page);
- struct buffer_head *head = bh;
-
- do {
- if (!buffer_uptodate(bh)) {
- memset(bh->b_data, 0, bh->b_size);
- /*
- * akpm: I'm totally undecided about this. The
- * buffer has just been magically brought "up to
- * date", but nobody should want to be reading
- * it anyway, because it hasn't been used for
- * anything yet. It is still in a "not read
- * from disk yet" state.
- *
- * But non-uptodate buffers against an uptodate
- * page are against the rules. So do it anyway.
- */
- set_buffer_uptodate(bh);
- }
- } while ((bh = bh->b_this_page) != head);
- } else {
- memset(page_address(page), 0, PAGE_CACHE_SIZE);
- }
- flush_dcache_page(page);
- SetPageUptodate(page);
-}
-
-static int ramdisk_readpage(struct file *file, struct page *page)
-{
- if (!PageUptodate(page))
- make_page_uptodate(page);
- unlock_page(page);
- return 0;
-}
-
-static int ramdisk_prepare_write(struct file *file, struct page *page,
- unsigned offset, unsigned to)
-{
- if (!PageUptodate(page))
- make_page_uptodate(page);
- return 0;
-}
-
-static int ramdisk_commit_write(struct file *file, struct page *page,
- unsigned offset, unsigned to)
-{
- set_page_dirty(page);
- return 0;
-}
-
-/*
- * ->writepage to the blockdev's mapping has to redirty the page so that the
- * VM doesn't go and steal it. We return AOP_WRITEPAGE_ACTIVATE so that the VM
- * won't try to (pointlessly) write the page again for a while.
- *
- * Really, these pages should not be on the LRU at all.
- */
-static int ramdisk_writepage(struct page *page, struct writeback_control *wbc)
-{
- if (!PageUptodate(page))
- make_page_uptodate(page);
- SetPageDirty(page);
- if (wbc->for_reclaim)
- return AOP_WRITEPAGE_ACTIVATE;
- unlock_page(page);
- return 0;
-}
-
-/*
- * This is a little speedup thing: short-circuit attempts to write back the
- * ramdisk blockdev inode to its non-existent backing store.
- */
-static int ramdisk_writepages(struct address_space *mapping,
- struct writeback_control *wbc)
-{
- return 0;
-}
-
-/*
- * ramdisk blockdev pages have their own ->set_page_dirty() because we don't
- * want them to contribute to dirty memory accounting.
- */
-static int ramdisk_set_page_dirty(struct page *page)
-{
- if (!TestSetPageDirty(page))
- return 1;
- return 0;
-}
-
-/*
- * releasepage is called by pagevec_strip/try_to_release_page if
- * buffers_heads_over_limit is true. Without a releasepage function
- * try_to_free_buffers is called instead. That can unset the dirty
- * bit of our ram disk pages, which will be eventually freed, even
- * if the page is still in use.
- */
-static int ramdisk_releasepage(struct page *page, gfp_t dummy)
-{
- return 0;
-}
-
-static const struct address_space_operations ramdisk_aops = {
- .readpage = ramdisk_readpage,
- .prepare_write = ramdisk_prepare_write,
- .commit_write = ramdisk_commit_write,
- .writepage = ramdisk_writepage,
- .set_page_dirty = ramdisk_set_page_dirty,
- .writepages = ramdisk_writepages,
- .releasepage = ramdisk_releasepage,
-};
-
-static int rd_blkdev_pagecache_IO(int rw, struct bio_vec *vec, sector_t sector,
- struct address_space *mapping)
-{
- pgoff_t index = sector >> (PAGE_CACHE_SHIFT - 9);
- unsigned int vec_offset = vec->bv_offset;
- int offset = (sector << 9) & ~PAGE_CACHE_MASK;
- int size = vec->bv_len;
- int err = 0;
-
- do {
- int count;
- struct page *page;
- char *src;
- char *dst;
-
- count = PAGE_CACHE_SIZE - offset;
- if (count > size)
- count = size;
- size -= count;
-
- page = grab_cache_page(mapping, index);
- if (!page) {
- err = -ENOMEM;
- goto out;
- }
-
- if (!PageUptodate(page))
- make_page_uptodate(page);
-
- index++;
-
- if (rw == READ) {
- src = kmap_atomic(page, KM_USER0) + offset;
- dst = kmap_atomic(vec->bv_page, KM_USER1) + vec_offset;
- } else {
- src = kmap_atomic(vec->bv_page, KM_USER0) + vec_offset;
- dst = kmap_atomic(page, KM_USER1) + offset;
- }
- offset = 0;
- vec_offset += count;
-
- memcpy(dst, src, count);
-
- kunmap_atomic(src, KM_USER0);
- kunmap_atomic(dst, KM_USER1);
-
- if (rw == READ)
- flush_dcache_page(vec->bv_page);
- else
- set_page_dirty(page);
- unlock_page(page);
- put_page(page);
- } while (size);
-
- out:
- return err;
-}
-
-/*
- * Basically, my strategy here is to set up a buffer-head which can't be
- * deleted, and make that my Ramdisk. If the request is outside of the
- * allocated size, we must get rid of it...
- *
- * 19-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Added devfs support
- *
- */
-static int rd_make_request(struct request_queue *q, struct bio *bio)
-{
- struct block_device *bdev = bio->bi_bdev;
- struct address_space * mapping = bdev->bd_inode->i_mapping;
- sector_t sector = bio->bi_sector;
- unsigned long len = bio->bi_size >> 9;
- int rw = bio_data_dir(bio);
- struct bio_vec *bvec;
- int ret = 0, i;
-
- if (sector + len > get_capacity(bdev->bd_disk))
- goto fail;
-
- if (rw==READA)
- rw=READ;
-
- bio_for_each_segment(bvec, bio, i) {
- ret |= rd_blkdev_pagecache_IO(rw, bvec, sector, mapping);
- sector += bvec->bv_len >> 9;
- }
- if (ret)
- goto fail;
-
- bio_endio(bio, 0);
- return 0;
-fail:
- bio_io_error(bio);
- return 0;
-}
-
-static int rd_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int error;
- struct block_device *bdev = inode->i_bdev;
-
- if (cmd != BLKFLSBUF)
- return -ENOTTY;
-
- /*
- * special: we want to release the ramdisk memory, it's not like with
- * the other blockdevices where this ioctl only flushes away the buffer
- * cache
- */
- error = -EBUSY;
- mutex_lock(&bdev->bd_mutex);
- if (bdev->bd_openers <= 2) {
- truncate_inode_pages(bdev->bd_inode->i_mapping, 0);
- error = 0;
- }
- mutex_unlock(&bdev->bd_mutex);
- return error;
-}
-
-/*
- * This is the backing_dev_info for the blockdev inode itself. It doesn't need
- * writeback and it does not contribute to dirty memory accounting.
- */
-static struct backing_dev_info rd_backing_dev_info = {
- .ra_pages = 0, /* No readahead */
- .capabilities = BDI_CAP_NO_ACCT_DIRTY | BDI_CAP_NO_WRITEBACK | BDI_CAP_MAP_COPY,
- .unplug_io_fn = default_unplug_io_fn,
-};
-
-/*
- * This is the backing_dev_info for the files which live atop the ramdisk
- * "device". These files do need writeback and they do contribute to dirty
- * memory accounting.
- */
-static struct backing_dev_info rd_file_backing_dev_info = {
- .ra_pages = 0, /* No readahead */
- .capabilities = BDI_CAP_MAP_COPY, /* Does contribute to dirty memory */
- .unplug_io_fn = default_unplug_io_fn,
-};
-
-static int rd_open(struct inode *inode, struct file *filp)
-{
- unsigned unit = iminor(inode);
-
- if (rd_bdev[unit] == NULL) {
- struct block_device *bdev = inode->i_bdev;
- struct address_space *mapping;
- unsigned bsize;
- gfp_t gfp_mask;
-
- inode = igrab(bdev->bd_inode);
- rd_bdev[unit] = bdev;
- bdev->bd_openers++;
- bsize = bdev_hardsect_size(bdev);
- bdev->bd_block_size = bsize;
- inode->i_blkbits = blksize_bits(bsize);
- inode->i_size = get_capacity(bdev->bd_disk)<<9;
-
- mapping = inode->i_mapping;
- mapping->a_ops = &ramdisk_aops;
- mapping->backing_dev_info = &rd_backing_dev_info;
- bdev->bd_inode_backing_dev_info = &rd_file_backing_dev_info;
-
- /*
- * Deep badness. rd_blkdev_pagecache_IO() needs to allocate
- * pagecache pages within a request_fn. We cannot recur back
- * into the filesystem which is mounted atop the ramdisk, because
- * that would deadlock on fs locks. And we really don't want
- * to reenter rd_blkdev_pagecache_IO when we're already within
- * that function.
- *
- * So we turn off __GFP_FS and __GFP_IO.
- *
- * And to give this thing a hope of working, turn on __GFP_HIGH.
- * Hopefully, there's enough regular memory allocation going on
- * for the page allocator emergency pools to keep the ramdisk
- * driver happy.
- */
- gfp_mask = mapping_gfp_mask(mapping);
- gfp_mask &= ~(__GFP_FS|__GFP_IO);
- gfp_mask |= __GFP_HIGH;
- mapping_set_gfp_mask(mapping, gfp_mask);
- }
-
- return 0;
-}
-
-static struct block_device_operations rd_bd_op = {
- .owner = THIS_MODULE,
- .open = rd_open,
- .ioctl = rd_ioctl,
-};
-
-/*
- * Before freeing the module, invalidate all of the protected buffers!
- */
-static void __exit rd_cleanup(void)
-{
- int i;
-
- for (i = 0; i < CONFIG_BLK_DEV_RAM_COUNT; i++) {
- struct block_device *bdev = rd_bdev[i];
- rd_bdev[i] = NULL;
- if (bdev) {
- invalidate_bdev(bdev);
- blkdev_put(bdev);
- }
- del_gendisk(rd_disks[i]);
- put_disk(rd_disks[i]);
- blk_cleanup_queue(rd_queue[i]);
- }
- unregister_blkdev(RAMDISK_MAJOR, "ramdisk");
-
- bdi_destroy(&rd_file_backing_dev_info);
- bdi_destroy(&rd_backing_dev_info);
-}
-
-/*
- * This is the registration and initialization section of the RAM disk driver
- */
-static int __init rd_init(void)
-{
- int i;
- int err;
-
- err = bdi_init(&rd_backing_dev_info);
- if (err)
- goto out2;
-
- err = bdi_init(&rd_file_backing_dev_info);
- if (err) {
- bdi_destroy(&rd_backing_dev_info);
- goto out2;
- }
-
- err = -ENOMEM;
-
- if (rd_blocksize > PAGE_SIZE || rd_blocksize < 512 ||
- !is_power_of_2(rd_blocksize)) {
- printk("RAMDISK: wrong blocksize %d, reverting to defaults\n",
- rd_blocksize);
- rd_blocksize = BLOCK_SIZE;
- }
-
- for (i = 0; i < CONFIG_BLK_DEV_RAM_COUNT; i++) {
- rd_disks[i] = alloc_disk(1);
- if (!rd_disks[i])
- goto out;
-
- rd_queue[i] = blk_alloc_queue(GFP_KERNEL);
- if (!rd_queue[i]) {
- put_disk(rd_disks[i]);
- goto out;
- }
- }
-
- if (register_blkdev(RAMDISK_MAJOR, "ramdisk")) {
- err = -EIO;
- goto out;
- }
-
- for (i = 0; i < CONFIG_BLK_DEV_RAM_COUNT; i++) {
- struct gendisk *disk = rd_disks[i];
-
- blk_queue_make_request(rd_queue[i], &rd_make_request);
- blk_queue_hardsect_size(rd_queue[i], rd_blocksize);
-
- /* rd_size is given in kB */
- disk->major = RAMDISK_MAJOR;
- disk->first_minor = i;
- disk->fops = &rd_bd_op;
- disk->queue = rd_queue[i];
- disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO;
- sprintf(disk->disk_name, "ram%d", i);
- set_capacity(disk, rd_size * 2);
- add_disk(rd_disks[i]);
- }
-
- /* rd_size is given in kB */
- printk("RAMDISK driver initialized: "
- "%d RAM disks of %dK size %d blocksize\n",
- CONFIG_BLK_DEV_RAM_COUNT, rd_size, rd_blocksize);
-
- return 0;
-out:
- while (i--) {
- put_disk(rd_disks[i]);
- blk_cleanup_queue(rd_queue[i]);
- }
- bdi_destroy(&rd_backing_dev_info);
- bdi_destroy(&rd_file_backing_dev_info);
-out2:
- return err;
-}
-
-module_init(rd_init);
-module_exit(rd_cleanup);
-
-/* options - nonmodular */
-#ifndef MODULE
-static int __init ramdisk_size(char *str)
-{
- rd_size = simple_strtol(str,NULL,0);
- return 1;
-}
-static int __init ramdisk_blocksize(char *str)
-{
- rd_blocksize = simple_strtol(str,NULL,0);
- return 1;
-}
-__setup("ramdisk_size=", ramdisk_size);
-__setup("ramdisk_blocksize=", ramdisk_blocksize);
-#endif
-
-/* options - modular */
-module_param(rd_size, int, 0);
-MODULE_PARM_DESC(rd_size, "Size of each RAM disk in kbytes.");
-module_param(rd_blocksize, int, 0);
-MODULE_PARM_DESC(rd_blocksize, "Blocksize of each RAM disk in bytes.");
-MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index 1f0b752..a7c4990 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -57,7 +57,6 @@
#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
#endif
-#define MAX_PCI_DEVICE_NUM 3
static char *applicom_pci_devnames[] = {
"PCI board",
@@ -66,12 +65,9 @@
};
static struct pci_device_id applicom_pci_tbl[] = {
- { PCI_VENDOR_ID_APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { PCI_VENDOR_ID_APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { PCI_VENDOR_ID_APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) },
+ { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) },
+ { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, applicom_pci_tbl);
@@ -197,31 +193,29 @@
while ( (dev = pci_get_class(PCI_CLASS_OTHERS << 16, dev))) {
- if (dev->vendor != PCI_VENDOR_ID_APPLICOM)
- continue;
-
- if (dev->device > MAX_PCI_DEVICE_NUM || dev->device == 0)
+ if (!pci_match_id(applicom_pci_tbl, dev))
continue;
if (pci_enable_device(dev))
return -EIO;
- RamIO = ioremap(dev->resource[0].start, LEN_RAM_IO);
+ RamIO = ioremap(pci_resource_start(dev, 0), LEN_RAM_IO);
if (!RamIO) {
printk(KERN_INFO "ac.o: Failed to ioremap PCI memory "
"space at 0x%llx\n",
- (unsigned long long)dev->resource[0].start);
+ (unsigned long long)pci_resource_start(dev, 0));
pci_disable_device(dev);
return -EIO;
}
printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n",
applicom_pci_devnames[dev->device-1],
- (unsigned long long)dev->resource[0].start,
+ (unsigned long long)pci_resource_start(dev, 0),
dev->irq);
- boardno = ac_register_board(dev->resource[0].start, RamIO,0);
+ boardno = ac_register_board(pci_resource_start(dev, 0),
+ RamIO, 0);
if (!boardno) {
printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n");
iounmap(RamIO);
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 2fc255a..64b7b2b 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -207,7 +207,7 @@
static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static void moxa_poll(unsigned long);
-static void moxa_set_tty_param(struct tty_struct *);
+static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
static int moxa_block_till_ready(struct tty_struct *, struct file *,
struct moxa_port *);
static void moxa_setup_empty_event(struct tty_struct *);
@@ -500,7 +500,7 @@
ch->tty = tty;
if (!(ch->asyncflags & ASYNC_INITIALIZED)) {
ch->statusflags = 0;
- moxa_set_tty_param(tty);
+ moxa_set_tty_param(tty, tty->termios);
MoxaPortLineCtrl(ch->port, 1, 1);
MoxaPortEnable(ch->port);
ch->asyncflags |= ASYNC_INITIALIZED;
@@ -803,7 +803,7 @@
if (ch == NULL)
return;
- moxa_set_tty_param(tty);
+ moxa_set_tty_param(tty, old_termios);
if (!(old_termios->c_cflag & CLOCAL) &&
(tty->termios->c_cflag & CLOCAL))
wake_up_interruptible(&ch->open_wait);
@@ -903,11 +903,11 @@
/******************************************************************************/
-static void moxa_set_tty_param(struct tty_struct *tty)
+static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
{
register struct ktermios *ts;
struct moxa_port *ch;
- int rts, cts, txflow, rxflow, xany;
+ int rts, cts, txflow, rxflow, xany, baud;
ch = (struct moxa_port *) tty->driver_data;
ts = tty->termios;
@@ -924,8 +924,15 @@
rxflow = 1;
if (ts->c_iflag & IXANY)
xany = 1;
+
+ /* Clear the features we don't support */
+ ts->c_cflag &= ~CMSPAR;
MoxaPortFlowCtrl(ch->port, rts, cts, txflow, rxflow, xany);
- MoxaPortSetTermio(ch->port, ts, tty_get_baud_rate(tty));
+ baud = MoxaPortSetTermio(ch->port, ts, tty_get_baud_rate(tty));
+ if (baud == -1)
+ baud = tty_termios_baud_rate(old_termios);
+ /* Not put the baud rate into the termios data */
+ tty_encode_baud_rate(tty, baud, baud);
}
static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
@@ -2065,7 +2072,7 @@
if (baud >= 921600L)
return (-1);
}
- MoxaPortSetBaud(port, baud);
+ baud = MoxaPortSetBaud(port, baud);
if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
@@ -2074,7 +2081,7 @@
moxa_wait_finish(ofsAddr);
}
- return (0);
+ return (baud);
}
int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState)
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 90c3969..46b2a1c 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1,6 +1,6 @@
/*
* n_tty.c --- implements the N_TTY line discipline.
- *
+ *
* This code used to be in tty_io.c, but things are getting hairy
* enough that it made sense to split things off. (The N_TTY
* processing has changed so much that it's hardly recognizable,
@@ -8,19 +8,19 @@
*
* Note that the open routine for N_TTY is guaranteed never to return
* an error. This is because Linux will fall back to setting a line
- * to N_TTY if it can not switch to any other line discipline.
+ * to N_TTY if it can not switch to any other line discipline.
*
* Written by Theodore Ts'o, Copyright 1994.
- *
+ *
* This file also contains code originally written by Linus Torvalds,
* Copyright 1991, 1992, 1993, and by Julian Cowley, Copyright 1994.
- *
+ *
* This file may be redistributed under the terms of the GNU General Public
* License.
*
* Reduced memory usage for older ARM systems - Russell King.
*
- * 2000/01/20 Fixed SMP locking on put_tty_queue using bits of
+ * 2000/01/20 Fixed SMP locking on put_tty_queue using bits of
* the patch by Andrew J. Kroll <ag784@freenet.buffalo.edu>
* who actually finally proved there really was a race.
*
@@ -144,11 +144,11 @@
* Can sleep, may be called under the atomic_read_lock mutex but
* this is not guaranteed.
*/
-
-static void check_unthrottle(struct tty_struct * tty)
+
+static void check_unthrottle(struct tty_struct *tty)
{
if (tty->count &&
- test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
+ test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
tty->driver->unthrottle)
tty->driver->unthrottle(tty);
}
@@ -157,7 +157,7 @@
* reset_buffer_flags - reset buffer state
* @tty: terminal to reset
*
- * Reset the read buffer counters, clear the flags,
+ * Reset the read buffer counters, clear the flags,
* and make sure the driver is unthrottled. Called
* from n_tty_open() and n_tty_flush_buffer().
*/
@@ -186,12 +186,12 @@
* FIXME: tty->ctrl_status is not spinlocked and relies on
* lock_kernel() still.
*/
-
-static void n_tty_flush_buffer(struct tty_struct * tty)
+
+static void n_tty_flush_buffer(struct tty_struct *tty)
{
/* clear everything and unthrottle the driver */
reset_buffer_flags(tty);
-
+
if (!tty->link)
return;
@@ -206,9 +206,9 @@
* @tty: tty device
*
* Report the number of characters buffered to be delivered to user
- * at this instant in time.
+ * at this instant in time.
*/
-
+
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
{
unsigned long flags;
@@ -234,7 +234,7 @@
* character. We use this to correctly compute the on screen size
* of the character when printing
*/
-
+
static inline int is_utf8_continuation(unsigned char c)
{
return (c & 0xc0) == 0x80;
@@ -247,7 +247,7 @@
* Returns true if the utf8 character 'c' is a multibyte continuation
* character and the terminal is in unicode mode.
*/
-
+
static inline int is_continuation(unsigned char c, struct tty_struct *tty)
{
return I_IUTF8(tty) && is_utf8_continuation(c);
@@ -266,7 +266,7 @@
* Called from both the receive and transmit sides and can be called
* re-entrantly. Relies on lock_kernel() still.
*/
-
+
static int opost(unsigned char c, struct tty_struct *tty)
{
int space, spaces;
@@ -339,9 +339,9 @@
*
* Called from write_chan under the tty layer write lock.
*/
-
-static ssize_t opost_block(struct tty_struct * tty,
- const unsigned char * buf, unsigned int nr)
+
+static ssize_t opost_block(struct tty_struct *tty,
+ const unsigned char *buf, unsigned int nr)
{
int space;
int i;
@@ -386,7 +386,7 @@
break_out:
if (tty->driver->flush_chars)
tty->driver->flush_chars(tty);
- i = tty->driver->write(tty, buf, i);
+ i = tty->driver->write(tty, buf, i);
return i;
}
@@ -398,7 +398,7 @@
*
* Queue a byte to the driver layer for output
*/
-
+
static inline void put_char(unsigned char c, struct tty_struct *tty)
{
tty->driver->put_char(tty, c);
@@ -409,7 +409,7 @@
* @c: unicode byte to echo
* @tty: terminal device
*
- * Echo user input back onto the screen. This must be called only when
+ * Echo user input back onto the screen. This must be called only when
* L_ECHO(tty) is true. Called from the driver receive_buf path.
*/
@@ -441,7 +441,7 @@
* present in the stream from the driver layer. Handles the complexities
* of UTF-8 multibyte symbols.
*/
-
+
static void eraser(unsigned char c, struct tty_struct *tty)
{
enum { ERASE, WERASE, KILL } kill_type;
@@ -541,7 +541,7 @@
/* should never happen */
if (tty->column > 0x80000000)
- tty->column = 0;
+ tty->column = 0;
/* Now backup to that column. */
while (tty->column > col) {
@@ -585,7 +585,7 @@
* settings and character used. Called from the driver receive_buf
* path so serialized.
*/
-
+
static inline void isig(int sig, struct tty_struct *tty, int flush)
{
if (tty->pgrp)
@@ -606,7 +606,7 @@
*
* Called from the receive_buf path so single threaded.
*/
-
+
static inline void n_tty_receive_break(struct tty_struct *tty)
{
if (I_IGNBRK(tty))
@@ -635,7 +635,7 @@
* need locking as num_overrun and overrun_time are function
* private.
*/
-
+
static inline void n_tty_receive_overrun(struct tty_struct *tty)
{
char buf[64];
@@ -662,9 +662,8 @@
static inline void n_tty_receive_parity_error(struct tty_struct *tty,
unsigned char c)
{
- if (I_IGNPAR(tty)) {
+ if (I_IGNPAR(tty))
return;
- }
if (I_PARMRK(tty)) {
put_tty_queue('\377', tty);
put_tty_queue('\0', tty);
@@ -682,7 +681,7 @@
* @c: character
*
* Process an individual character of input received from the driver.
- * This is serialized with respect to itself by the rules for the
+ * This is serialized with respect to itself by the rules for the
* driver above.
*/
@@ -694,7 +693,7 @@
put_tty_queue(c, tty);
return;
}
-
+
if (I_ISTRIP(tty))
c &= 0x7f;
if (I_IUCLC(tty) && L_IEXTEN(tty))
@@ -739,7 +738,7 @@
put_tty_queue(c, tty);
return;
}
-
+
if (c == '\r') {
if (I_IGNCR(tty))
return;
@@ -825,8 +824,8 @@
goto handle_newline;
}
if (c == EOF_CHAR(tty)) {
- if (tty->canon_head != tty->read_head)
- set_bit(TTY_PUSH, &tty->flags);
+ if (tty->canon_head != tty->read_head)
+ set_bit(TTY_PUSH, &tty->flags);
c = __DISABLED_CHAR;
goto handle_newline;
}
@@ -850,7 +849,7 @@
if (I_PARMRK(tty) && c == (unsigned char) '\377')
put_tty_queue(c, tty);
- handle_newline:
+handle_newline:
spin_lock_irqsave(&tty->read_lock, flags);
set_bit(tty->read_head, tty->read_flags);
put_tty_queue_nolock(c, tty);
@@ -863,7 +862,7 @@
return;
}
}
-
+
finish_erasing(tty);
if (L_ECHO(tty)) {
if (tty->read_cnt >= N_TTY_BUF_SIZE-1) {
@@ -884,7 +883,7 @@
put_tty_queue(c, tty);
put_tty_queue(c, tty);
-}
+}
/**
@@ -898,12 +897,10 @@
static void n_tty_write_wakeup(struct tty_struct *tty)
{
- if (tty->fasync)
- {
- set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ if (tty->fasync) {
+ set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
}
- return;
}
/**
@@ -918,7 +915,7 @@
* not from interrupt context. The driver is responsible for making
* calls one at a time and in order (or using flush_to_ldisc)
*/
-
+
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
@@ -950,7 +947,7 @@
tty->read_cnt += i;
spin_unlock_irqrestore(&tty->read_lock, cpuflags);
} else {
- for (i=count, p = cp, f = fp; i; i--, p++) {
+ for (i = count, p = cp, f = fp; i; i--, p++) {
if (f)
flags = *f++;
switch (flags) {
@@ -968,7 +965,7 @@
n_tty_receive_overrun(tty);
break;
default:
- printk("%s: unknown flag %d\n",
+ printk(KERN_ERR "%s: unknown flag %d\n",
tty_name(tty, buf), flags);
break;
}
@@ -1001,7 +998,7 @@
int is_ignored(int sig)
{
return (sigismember(¤t->blocked, sig) ||
- current->sighand->action[sig-1].sa.sa_handler == SIG_IGN);
+ current->sighand->action[sig-1].sa.sa_handler == SIG_IGN);
}
/**
@@ -1011,16 +1008,16 @@
*
* Called by the tty layer when the user changes termios flags so
* that the line discipline can plan ahead. This function cannot sleep
- * and is protected from re-entry by the tty layer. The user is
+ * and is protected from re-entry by the tty layer. The user is
* guaranteed that this function will not be re-entered or in progress
* when the ldisc is closed.
*/
-
-static void n_tty_set_termios(struct tty_struct *tty, struct ktermios * old)
+
+static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
if (!tty)
return;
-
+
tty->icanon = (L_ICANON(tty) != 0);
if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
tty->raw = 1;
@@ -1085,12 +1082,12 @@
* n_tty_close - close the ldisc for this tty
* @tty: device
*
- * Called from the terminal layer when this line discipline is
- * being shut down, either because of a close or becsuse of a
+ * Called from the terminal layer when this line discipline is
+ * being shut down, either because of a close or becsuse of a
* discipline change. The function will not be called while other
* ldisc methods are in progress.
*/
-
+
static void n_tty_close(struct tty_struct *tty)
{
n_tty_flush_buffer(tty);
@@ -1104,7 +1101,7 @@
* n_tty_open - open an ldisc
* @tty: terminal to open
*
- * Called when this line discipline is being attached to the
+ * Called when this line discipline is being attached to the
* terminal device. Can sleep. Called serialized so that no
* other events will occur in parallel. No further open will occur
* until a close.
@@ -1157,7 +1154,7 @@
* Called under the tty->atomic_read_lock sem
*
*/
-
+
static int copy_from_read_buf(struct tty_struct *tty,
unsigned char __user **b,
size_t *nr)
@@ -1186,7 +1183,8 @@
return retval;
}
-extern ssize_t redirected_tty_write(struct file *,const char *,size_t,loff_t *);
+extern ssize_t redirected_tty_write(struct file *, const char *,
+ size_t, loff_t *);
/**
* job_control - check job control
@@ -1194,10 +1192,10 @@
* @file: file handle
*
* Perform job control management checks on this file/tty descriptor
- * and if appropriate send any needed signals and return a negative
+ * and if appropriate send any needed signals and return a negative
* error code if action should be taken.
*/
-
+
static int job_control(struct tty_struct *tty, struct file *file)
{
/* Job control check -- must be done at start and after
@@ -1208,7 +1206,7 @@
if (file->f_op->write != redirected_tty_write &&
current->signal->tty == tty) {
if (!tty->pgrp)
- printk("read_chan: no tty->pgrp!\n");
+ printk(KERN_ERR "read_chan: no tty->pgrp!\n");
else if (task_pgrp(current) != tty->pgrp) {
if (is_ignored(SIGTTIN) ||
is_current_pgrp_orphaned())
@@ -1220,7 +1218,7 @@
}
return 0;
}
-
+
/**
* read_chan - read function for tty
@@ -1236,7 +1234,7 @@
*
* This code must be sure never to sleep through a hangup.
*/
-
+
static ssize_t read_chan(struct tty_struct *tty, struct file *file,
unsigned char __user *buf, size_t nr)
{
@@ -1252,14 +1250,14 @@
do_it_again:
if (!tty->read_buf) {
- printk("n_tty_read_chan: called with read_buf == NULL?!?\n");
+ printk(KERN_ERR "n_tty_read_chan: read_buf == NULL?!?\n");
return -EIO;
}
c = job_control(tty, file);
- if(c < 0)
+ if (c < 0)
return c;
-
+
minimum = time = 0;
timeout = MAX_SCHEDULE_TIMEOUT;
if (!tty->icanon) {
@@ -1287,8 +1285,7 @@
if (file->f_flags & O_NONBLOCK) {
if (!mutex_trylock(&tty->atomic_read_lock))
return -EAGAIN;
- }
- else {
+ } else {
if (mutex_lock_interruptible(&tty->atomic_read_lock))
return -ERESTARTSYS;
}
@@ -1314,11 +1311,11 @@
so that any interrupt will set the state back to
TASK_RUNNING. */
set_current_state(TASK_INTERRUPTIBLE);
-
+
if (((minimum - (b - buf)) < tty->minimum_to_wake) &&
((minimum - (b - buf)) >= 1))
tty->minimum_to_wake = (minimum - (b - buf));
-
+
if (!input_available_p(tty, 0)) {
if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
retval = -EIO;
@@ -1355,7 +1352,7 @@
if (tty->icanon) {
/* N.B. avoid overrun if nr == 0 */
while (nr && tty->read_cnt) {
- int eol;
+ int eol;
eol = test_and_clear_bit(tty->read_tail,
tty->read_flags);
@@ -1427,7 +1424,7 @@
if (size) {
retval = size;
if (nr)
- clear_bit(TTY_PUSH, &tty->flags);
+ clear_bit(TTY_PUSH, &tty->flags);
} else if (test_and_clear_bit(TTY_PUSH, &tty->flags))
goto do_it_again;
@@ -1450,9 +1447,9 @@
*
* This code must be sure never to sleep through a hangup.
*/
-
-static ssize_t write_chan(struct tty_struct * tty, struct file * file,
- const unsigned char * buf, size_t nr)
+
+static ssize_t write_chan(struct tty_struct *tty, struct file *file,
+ const unsigned char *buf, size_t nr)
{
const unsigned char *b = buf;
DECLARE_WAITQUEUE(wait, current);
@@ -1542,8 +1539,9 @@
* recompute the new limits. Possibly set_termios should issue
* a read wakeup to fix this bug.
*/
-
-static unsigned int normal_poll(struct tty_struct * tty, struct file * file, poll_table *wait)
+
+static unsigned int normal_poll(struct tty_struct *tty, struct file *file,
+ poll_table *wait)
{
unsigned int mask = 0;
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 68c289f..72f2892 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -715,11 +715,10 @@
unsigned rocketMode;
int bits, baud, divisor;
CHANNEL_t *cp;
+ struct ktermios *t = info->tty->termios;
- if (!info->tty || !info->tty->termios)
- return;
cp = &info->channel;
- cflag = info->tty->termios->c_cflag;
+ cflag = t->c_cflag;
/* Byte size and parity */
if ((cflag & CSIZE) == CS8) {
@@ -754,10 +753,7 @@
baud = 9600;
divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
if ((divisor >= 8192 || divisor < 0) && old_termios) {
- info->tty->termios->c_cflag &= ~CBAUD;
- info->tty->termios->c_cflag |=
- (old_termios->c_cflag & CBAUD);
- baud = tty_get_baud_rate(info->tty);
+ baud = tty_termios_baud_rate(old_termios);
if (!baud)
baud = 9600;
divisor = (rp_baud_base[info->board] / baud) - 1;
@@ -769,6 +765,9 @@
info->cps = baud / bits;
sSetBaud(cp, divisor);
+ /* FIXME: Should really back compute a baud rate from the divisor */
+ tty_encode_baud_rate(info->tty, baud, baud);
+
if (cflag & CRTSCTS) {
info->intmask |= DELTA_CTS;
sEnCTSFlowCtl(cp);
@@ -1202,15 +1201,14 @@
cflag = tty->termios->c_cflag;
- if (cflag == old_termios->c_cflag)
- return;
-
/*
* This driver doesn't support CS5 or CS6
*/
if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
tty->termios->c_cflag =
((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
+ /* Or CMSPAR */
+ tty->termios->c_cflag &= ~CMSPAR;
configure_r_port(info, old_termios);
@@ -1401,6 +1399,9 @@
{
int reset;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
if (copy_from_user(&reset, arg, sizeof (int)))
return -EFAULT;
if (reset)
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index bacded0..7722466 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -27,7 +27,7 @@
{
struct tty_audit_buf *buf;
- buf = kmalloc(sizeof (*buf), GFP_KERNEL);
+ buf = kmalloc(sizeof(*buf), GFP_KERNEL);
if (!buf)
goto err;
if (PAGE_SIZE != N_TTY_BUF_SIZE)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 79c86c4..613ec81 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -19,7 +19,7 @@
* Also restructured routines so that there is more of a separation
* between the high-level tty routines (tty_io.c and tty_ioctl.c) and
* the low-level tty routines (serial.c, pty.c, console.c). This
- * makes for cleaner and more compact code. -TYT, 9/17/92
+ * makes for cleaner and more compact code. -TYT, 9/17/92
*
* Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
* which can be dynamically activated and de-activated by the line
@@ -41,7 +41,7 @@
*
* New TIOCLINUX variants added.
* -- mj@k332.feld.cvut.cz, 19-Nov-95
- *
+ *
* Restrict vt switching via ioctl()
* -- grif@cs.ucr.edu, 5-Dec-95
*
@@ -62,7 +62,8 @@
* -- Russell King <rmk@arm.linux.org.uk>
*
* Move do_SAK() into process context. Less stack use in devfs functions.
- * alloc_tty_struct() always uses kmalloc() -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
+ * alloc_tty_struct() always uses kmalloc()
+ * -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
*/
#include <linux/types.h>
@@ -126,7 +127,7 @@
/* This list gets poked at by procfs and various bits of boot up code. This
could do with some rationalisation such as pulling the tty proc function
into this file */
-
+
LIST_HEAD(tty_drivers); /* linked list of tty drivers */
/* Mutex to protect creating and releasing a tty. This is shared with
@@ -136,7 +137,7 @@
#ifdef CONFIG_UNIX98_PTYS
extern struct tty_driver *ptm_driver; /* Unix98 pty masters; for /dev/ptmx */
-extern int pty_limit; /* Config limit on Unix98 ptys */
+extern int pty_limit; /* Config limit on Unix98 ptys */
static DEFINE_IDR(allocated_ptys);
static DEFINE_MUTEX(allocated_ptys_lock);
static int ptmx_open(struct inode *, struct file *);
@@ -146,19 +147,20 @@
static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
-ssize_t redirected_tty_write(struct file *, const char __user *, size_t, loff_t *);
+ssize_t redirected_tty_write(struct file *, const char __user *,
+ size_t, loff_t *);
static unsigned int tty_poll(struct file *, poll_table *);
static int tty_open(struct inode *, struct file *);
static int tty_release(struct inode *, struct file *);
-int tty_ioctl(struct inode * inode, struct file * file,
+int tty_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg);
#ifdef CONFIG_COMPAT
-static long tty_compat_ioctl(struct file * file, unsigned int cmd,
+static long tty_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long arg);
#else
#define tty_compat_ioctl NULL
#endif
-static int tty_fasync(int fd, struct file * filp, int on);
+static int tty_fasync(int fd, struct file *filp, int on);
static void release_tty(struct tty_struct *tty, int idx);
static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
@@ -244,7 +246,7 @@
#ifdef CHECK_TTY_COUNT
struct list_head *p;
int count = 0;
-
+
file_list_lock();
list_for_each(p, &tty->tty_files) {
count++;
@@ -281,11 +283,11 @@
static void tty_buffer_free_all(struct tty_struct *tty)
{
struct tty_buffer *thead;
- while((thead = tty->buf.head) != NULL) {
+ while ((thead = tty->buf.head) != NULL) {
tty->buf.head = thead->next;
kfree(thead);
}
- while((thead = tty->buf.free) != NULL) {
+ while ((thead = tty->buf.free) != NULL) {
tty->buf.free = thead->next;
kfree(thead);
}
@@ -331,7 +333,7 @@
if (tty->buf.memory_used + size > 65536)
return NULL;
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
- if(p == NULL)
+ if (p == NULL)
return NULL;
p->used = 0;
p->size = size;
@@ -361,7 +363,7 @@
tty->buf.memory_used -= b->size;
WARN_ON(tty->buf.memory_used < 0);
- if(b->size >= 512)
+ if (b->size >= 512)
kfree(b);
else {
b->next = tty->buf.free;
@@ -384,7 +386,7 @@
{
struct tty_buffer *thead;
- while((thead = tty->buf.head) != NULL) {
+ while ((thead = tty->buf.head) != NULL) {
tty->buf.head = thead->next;
tty_buffer_free(tty, thead);
}
@@ -436,9 +438,9 @@
static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
{
struct tty_buffer **tbh = &tty->buf.free;
- while((*tbh) != NULL) {
+ while ((*tbh) != NULL) {
struct tty_buffer *t = *tbh;
- if(t->size >= size) {
+ if (t->size >= size) {
*tbh = t->next;
t->next = NULL;
t->used = 0;
@@ -450,7 +452,7 @@
tbh = &((*tbh)->next);
}
/* Round the buffer size out */
- size = (size + 0xFF) & ~ 0xFF;
+ size = (size + 0xFF) & ~0xFF;
return tty_buffer_alloc(tty, size);
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
@@ -520,7 +522,7 @@
int space = tty_buffer_request_room(tty, size - copied);
struct tty_buffer *tb = tty->buf.tail;
/* If there is no space then tb may be NULL */
- if(unlikely(space == 0))
+ if (unlikely(space == 0))
break;
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
@@ -556,7 +558,7 @@
int space = tty_buffer_request_room(tty, size - copied);
struct tty_buffer *tb = tty->buf.tail;
/* If there is no space then tb may be NULL */
- if(unlikely(space == 0))
+ if (unlikely(space == 0))
break;
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memcpy(tb->flag_buf_ptr + tb->used, flags, space);
@@ -608,7 +610,8 @@
* Locking: May call functions taking tty->buf.lock
*/
-int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size)
+int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
+ size_t size)
{
int space = tty_buffer_request_room(tty, size);
if (likely(space)) {
@@ -638,7 +641,8 @@
* Locking: May call functions taking tty->buf.lock
*/
-int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size)
+int tty_prepare_flip_string_flags(struct tty_struct *tty,
+ unsigned char **chars, char **flags, size_t size)
{
int space = tty_buffer_request_room(tty, size);
if (likely(space)) {
@@ -660,12 +664,12 @@
* @num: line discipline number
*
* This is probably overkill for real world processors but
- * they are not on hot paths so a little discipline won't do
+ * they are not on hot paths so a little discipline won't do
* any harm.
*
* Locking: takes termios_mutex
*/
-
+
static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
{
mutex_lock(&tty->termios_mutex);
@@ -678,10 +682,11 @@
* must be taken with irqs off because there are hangup path
* callers who will do ldisc lookups and cannot sleep.
*/
-
+
static DEFINE_SPINLOCK(tty_ldisc_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
-static struct tty_ldisc tty_ldiscs[NR_LDISCS]; /* line disc dispatch table */
+/* Line disc dispatch table */
+static struct tty_ldisc tty_ldiscs[NR_LDISCS];
/**
* tty_register_ldisc - install a line discipline
@@ -700,17 +705,17 @@
{
unsigned long flags;
int ret = 0;
-
+
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
-
+
spin_lock_irqsave(&tty_ldisc_lock, flags);
tty_ldiscs[disc] = *new_ldisc;
tty_ldiscs[disc].num = disc;
tty_ldiscs[disc].flags |= LDISC_FLAG_DEFINED;
tty_ldiscs[disc].refcount = 0;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-
+
return ret;
}
EXPORT_SYMBOL(tty_register_ldisc);
@@ -766,20 +771,18 @@
if (disc < N_TTY || disc >= NR_LDISCS)
return NULL;
-
+
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld = &tty_ldiscs[disc];
/* Check the entry is defined */
- if(ld->flags & LDISC_FLAG_DEFINED)
- {
+ if (ld->flags & LDISC_FLAG_DEFINED) {
/* If the module is being unloaded we can't use it */
if (!try_module_get(ld->owner))
- ld = NULL;
+ ld = NULL;
else /* lock it */
ld->refcount++;
- }
- else
+ } else
ld = NULL;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ld;
@@ -802,9 +805,9 @@
{
struct tty_ldisc *ld;
unsigned long flags;
-
+
BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
-
+
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld = &tty_ldiscs[disc];
BUG_ON(ld->refcount == 0);
@@ -812,7 +815,7 @@
module_put(ld->owner);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
-
+
EXPORT_SYMBOL_GPL(tty_ldisc_put);
/**
@@ -851,11 +854,10 @@
unsigned long flags;
struct tty_ldisc *ld;
int ret = 0;
-
+
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld = &tty->ldisc;
- if(test_bit(TTY_LDISC, &tty->flags))
- {
+ if (test_bit(TTY_LDISC, &tty->flags)) {
ld->refcount++;
ret = 1;
}
@@ -867,8 +869,8 @@
* tty_ldisc_ref_wait - wait for the tty ldisc
* @tty: tty device
*
- * Dereference the line discipline for the terminal and take a
- * reference to it. If the line discipline is in flux then
+ * Dereference the line discipline for the terminal and take a
+ * reference to it. If the line discipline is in flux then
* wait patiently until it changes.
*
* Note: Must not be called from an IRQ/timer context. The caller
@@ -878,12 +880,12 @@
*
* Locking: call functions take tty_ldisc_lock
*/
-
+
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
/* wait_event is a macro */
wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
- if(tty->ldisc.refcount == 0)
+ if (tty->ldisc.refcount == 0)
printk(KERN_ERR "tty_ldisc_ref_wait\n");
return &tty->ldisc;
}
@@ -894,16 +896,16 @@
* tty_ldisc_ref - get the tty ldisc
* @tty: tty device
*
- * Dereference the line discipline for the terminal and take a
- * reference to it. If the line discipline is in flux then
+ * Dereference the line discipline for the terminal and take a
+ * reference to it. If the line discipline is in flux then
* return NULL. Can be called from IRQ and timer functions.
*
* Locking: called functions take tty_ldisc_lock
*/
-
+
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
{
- if(tty_ldisc_try(tty))
+ if (tty_ldisc_try(tty))
return &tty->ldisc;
return NULL;
}
@@ -919,19 +921,19 @@
*
* Locking: takes tty_ldisc_lock
*/
-
+
void tty_ldisc_deref(struct tty_ldisc *ld)
{
unsigned long flags;
BUG_ON(ld == NULL);
-
+
spin_lock_irqsave(&tty_ldisc_lock, flags);
- if(ld->refcount == 0)
+ if (ld->refcount == 0)
printk(KERN_ERR "tty_ldisc_deref: no references.\n");
else
ld->refcount--;
- if(ld->refcount == 0)
+ if (ld->refcount == 0)
wake_up(&tty_ldisc_wait);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
@@ -954,7 +956,7 @@
set_bit(TTY_LDISC, &tty->flags);
wake_up(&tty_ldisc_wait);
}
-
+
/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
@@ -966,7 +968,7 @@
* Locking: takes tty_ldisc_lock.
* called functions take termios_mutex
*/
-
+
static int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
int retval = 0;
@@ -1022,7 +1024,7 @@
spin_lock_irqsave(&tty_ldisc_lock, flags);
if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) {
- if(tty->ldisc.refcount) {
+ if (tty->ldisc.refcount) {
/* Free the new ldisc we grabbed. Must drop the lock
first. */
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
@@ -1031,14 +1033,14 @@
* There are several reasons we may be busy, including
* random momentary I/O traffic. We must therefore
* retry. We could distinguish between blocking ops
- * and retries if we made tty_ldisc_wait() smarter. That
- * is up for discussion.
+ * and retries if we made tty_ldisc_wait() smarter.
+ * That is up for discussion.
*/
if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0)
return -ERESTARTSYS;
goto restart;
}
- if(o_tty && o_tty->ldisc.refcount) {
+ if (o_tty && o_tty->ldisc.refcount) {
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
tty_ldisc_put(ldisc);
if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0)
@@ -1046,9 +1048,10 @@
goto restart;
}
}
-
- /* if the TTY_LDISC bit is set, then we are racing against another ldisc change */
-
+ /*
+ * If the TTY_LDISC bit is set, then we are racing against
+ * another ldisc change
+ */
if (!test_bit(TTY_LDISC, &tty->flags)) {
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
tty_ldisc_put(ldisc);
@@ -1072,7 +1075,6 @@
/*
* Wait for ->hangup_work and ->buf.work handlers to terminate
*/
-
flush_scheduled_work();
/* Shutdown the current discipline. */
if (tty->ldisc.close)
@@ -1106,21 +1108,21 @@
/* At this point we hold a reference to the new ldisc and a
a reference to the old ldisc. If we ended up flipping back
to the existing ldisc we have two references to it */
-
+
if (tty->ldisc.num != o_ldisc.num && tty->driver->set_ldisc)
tty->driver->set_ldisc(tty);
-
+
tty_ldisc_put(o_ldisc.num);
-
+
/*
* Allow ldisc referencing to occur as soon as the driver
* ldisc callback completes.
*/
-
+
tty_ldisc_enable(tty);
if (o_tty)
tty_ldisc_enable(o_tty);
-
+
/* Restart it in case no characters kick it off. Safe if
already running */
if (work)
@@ -1164,7 +1166,7 @@
* Locking: none
*/
-int tty_check_change(struct tty_struct * tty)
+int tty_check_change(struct tty_struct *tty)
{
if (current->signal->tty != tty)
return 0;
@@ -1185,31 +1187,31 @@
EXPORT_SYMBOL(tty_check_change);
-static ssize_t hung_up_tty_read(struct file * file, char __user * buf,
+static ssize_t hung_up_tty_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
return 0;
}
-static ssize_t hung_up_tty_write(struct file * file, const char __user * buf,
+static ssize_t hung_up_tty_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
return -EIO;
}
/* No kernel lock held - none needed ;) */
-static unsigned int hung_up_tty_poll(struct file * filp, poll_table * wait)
+static unsigned int hung_up_tty_poll(struct file *filp, poll_table *wait)
{
return POLLIN | POLLOUT | POLLERR | POLLHUP | POLLRDNORM | POLLWRNORM;
}
-static int hung_up_tty_ioctl(struct inode * inode, struct file * file,
+static int hung_up_tty_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}
-static long hung_up_tty_compat_ioctl(struct file * file,
+static long hung_up_tty_compat_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
@@ -1274,15 +1276,15 @@
* informs the line discipline if present that the driver is ready
* to receive more output data.
*/
-
+
void tty_wakeup(struct tty_struct *tty)
{
struct tty_ldisc *ld;
-
+
if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) {
ld = tty_ldisc_ref(tty);
- if(ld) {
- if(ld->write_wakeup)
+ if (ld) {
+ if (ld->write_wakeup)
ld->write_wakeup(tty);
tty_ldisc_deref(ld);
}
@@ -1299,12 +1301,12 @@
* Flush the line discipline queue (if any) for this tty. If there
* is no line discipline active this is a no-op.
*/
-
+
void tty_ldisc_flush(struct tty_struct *tty)
{
struct tty_ldisc *ld = tty_ldisc_ref(tty);
- if(ld) {
- if(ld->flush_buffer)
+ if (ld) {
+ if (ld->flush_buffer)
ld->flush_buffer(tty);
tty_ldisc_deref(ld);
}
@@ -1328,7 +1330,7 @@
tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
mutex_unlock(&tty->termios_mutex);
}
-
+
/**
* do_tty_hangup - actual handler for hangup events
* @work: tty device
@@ -1355,7 +1357,7 @@
{
struct tty_struct *tty =
container_of(work, struct tty_struct, hangup_work);
- struct file * cons_filp = NULL;
+ struct file *cons_filp = NULL;
struct file *filp, *f = NULL;
struct task_struct *p;
struct tty_ldisc *ld;
@@ -1373,7 +1375,7 @@
redirect = NULL;
}
spin_unlock(&redirect_lock);
-
+
check_tty_count(tty, "do_tty_hangup");
file_list_lock();
/* This breaks for file handles being sent over AF_UNIX sockets ? */
@@ -1387,13 +1389,14 @@
filp->f_op = &hung_up_tty_fops;
}
file_list_unlock();
-
- /* FIXME! What are the locking issues here? This may me overdoing things..
- * this question is especially important now that we've removed the irqlock. */
-
+ /*
+ * FIXME! What are the locking issues here? This may me overdoing
+ * things... This question is especially important now that we've
+ * removed the irqlock.
+ */
ld = tty_ldisc_ref(tty);
- if(ld != NULL) /* We may have no line discipline at this point */
- {
+ if (ld != NULL) {
+ /* We may have no line discipline at this point */
if (ld->flush_buffer)
ld->flush_buffer(tty);
if (tty->driver->flush_buffer)
@@ -1404,26 +1407,24 @@
if (ld->hangup)
ld->hangup(tty);
}
-
- /* FIXME: Once we trust the LDISC code better we can wait here for
- ldisc completion and fix the driver call race */
-
+ /*
+ * FIXME: Once we trust the LDISC code better we can wait here for
+ * ldisc completion and fix the driver call race
+ */
wake_up_interruptible(&tty->write_wait);
wake_up_interruptible(&tty->read_wait);
-
/*
* Shutdown the current line discipline, and reset it to
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
tty_reset_termios(tty);
-
/* Defer ldisc switch */
/* tty_deferred_ldisc_switch(N_TTY);
-
+
This should get done automatically when the port closes and
tty_release is called */
-
+
read_lock(&tasklist_lock);
if (tty->session) {
do_each_pid_task(tty->session, PIDTYPE_SID, p) {
@@ -1451,10 +1452,10 @@
tty->pgrp = NULL;
tty->ctrl_status = 0;
/*
- * If one of the devices matches a console pointer, we
- * cannot just call hangup() because that will cause
- * tty->count and state->count to go out of sync.
- * So we just call close() the right number of times.
+ * If one of the devices matches a console pointer, we
+ * cannot just call hangup() because that will cause
+ * tty->count and state->count to go out of sync.
+ * So we just call close() the right number of times.
*/
if (cons_filp) {
if (tty->driver->close)
@@ -1462,12 +1463,12 @@
tty->driver->close(tty, cons_filp);
} else if (tty->driver->hangup)
(tty->driver->hangup)(tty);
-
- /* We don't want to have driver/ldisc interactions beyond
- the ones we did here. The driver layer expects no
- calls after ->hangup() from the ldisc side. However we
- can't yet guarantee all that */
-
+ /*
+ * We don't want to have driver/ldisc interactions beyond
+ * the ones we did here. The driver layer expects no
+ * calls after ->hangup() from the ldisc side. However we
+ * can't yet guarantee all that.
+ */
set_bit(TTY_HUPPED, &tty->flags);
if (ld) {
tty_ldisc_enable(tty);
@@ -1486,11 +1487,10 @@
* schedule a hangup sequence to run after this event.
*/
-void tty_hangup(struct tty_struct * tty)
+void tty_hangup(struct tty_struct *tty)
{
#ifdef TTY_DEBUG_HANGUP
char buf[64];
-
printk(KERN_DEBUG "%s hangup...\n", tty_name(tty, buf));
#endif
schedule_work(&tty->hangup_work);
@@ -1507,7 +1507,7 @@
* is complete. That guarantee is necessary for security reasons.
*/
-void tty_vhangup(struct tty_struct * tty)
+void tty_vhangup(struct tty_struct *tty)
{
#ifdef TTY_DEBUG_HANGUP
char buf[64];
@@ -1516,6 +1516,7 @@
#endif
do_tty_hangup(&tty->hangup_work);
}
+
EXPORT_SYMBOL(tty_vhangup);
/**
@@ -1526,7 +1527,7 @@
* loss
*/
-int tty_hung_up_p(struct file * filp)
+int tty_hung_up_p(struct file *filp)
{
return (filp->f_op == &hung_up_tty_fops);
}
@@ -1534,8 +1535,12 @@
EXPORT_SYMBOL(tty_hung_up_p);
/**
- * is_tty - checker whether file is a TTY
+ * is_tty - checker whether file is a TTY
+ * @filp: file handle that may be a tty
+ *
+ * Check if the file handle is a tty handle.
*/
+
int is_tty(struct file *filp)
{
return filp->f_op->read == tty_read
@@ -1601,7 +1606,7 @@
put_pid(old_pgrp);
}
mutex_unlock(&tty_mutex);
- unlock_kernel();
+ unlock_kernel();
return;
}
if (tty_pgrp) {
@@ -1711,7 +1716,6 @@
}
if (tty->driver->start)
(tty->driver->start)(tty);
-
/* If we have a running line discipline it may need kicking */
tty_wakeup(tty);
}
@@ -1735,11 +1739,11 @@
* in new code. Multiple read calls may be outstanding in parallel.
*/
-static ssize_t tty_read(struct file * file, char __user * buf, size_t count,
+static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
int i;
- struct tty_struct * tty;
+ struct tty_struct *tty;
struct inode *inode;
struct tty_ldisc *ld;
@@ -1755,7 +1759,7 @@
ld = tty_ldisc_ref_wait(tty);
lock_kernel();
if (ld->read)
- i = (ld->read)(tty,file,buf,count);
+ i = (ld->read)(tty, file, buf, count);
else
i = -EIO;
tty_ldisc_deref(ld);
@@ -1795,7 +1799,7 @@
{
ssize_t ret, written = 0;
unsigned int chunk;
-
+
ret = tty_write_lock(tty, file->f_flags & O_NDELAY);
if (ret < 0)
return ret;
@@ -1891,21 +1895,22 @@
* kernel lock for historical reasons. New code should not rely on this.
*/
-static ssize_t tty_write(struct file * file, const char __user * buf, size_t count,
- loff_t *ppos)
+static ssize_t tty_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
{
- struct tty_struct * tty;
+ struct tty_struct *tty;
struct inode *inode = file->f_path.dentry->d_inode;
ssize_t ret;
struct tty_ldisc *ld;
-
+
tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode, "tty_write"))
return -EIO;
- if (!tty || !tty->driver->write || (test_bit(TTY_IO_ERROR, &tty->flags)))
- return -EIO;
+ if (!tty || !tty->driver->write ||
+ (test_bit(TTY_IO_ERROR, &tty->flags)))
+ return -EIO;
- ld = tty_ldisc_ref_wait(tty);
+ ld = tty_ldisc_ref_wait(tty);
if (!ld->write)
ret = -EIO;
else
@@ -1914,8 +1919,8 @@
return ret;
}
-ssize_t redirected_tty_write(struct file * file, const char __user * buf, size_t count,
- loff_t *ppos)
+ssize_t redirected_tty_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
{
struct file *p = NULL;
@@ -1932,7 +1937,6 @@
fput(p);
return res;
}
-
return tty_write(file, buf, count, ppos);
}
@@ -1954,8 +1958,8 @@
int i = index + driver->name_base;
/* ->name is initialized to "ttyp", but "tty" is expected */
sprintf(p, "%s%c%x",
- driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name,
- ptychar[i >> 4 & 0xf], i & 0xf);
+ driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name,
+ ptychar[i >> 4 & 0xf], i & 0xf);
}
/**
@@ -2034,7 +2038,7 @@
* First time open is complex, especially for PTY devices.
* This code guarantees that either everything succeeds and the
* TTY is ready for operation, or else the table slots are vacated
- * and the allocated memory released. (Except that the termios
+ * and the allocated memory released. (Except that the termios
* and locked termios may be retained.)
*/
@@ -2048,7 +2052,7 @@
ltp = o_ltp = NULL;
tty = alloc_tty_struct();
- if(!tty)
+ if (!tty)
goto fail_no_mem;
initialize_tty_struct(tty);
tty->driver = driver;
@@ -2109,9 +2113,8 @@
/*
* Everything allocated ... set up the o_tty structure.
*/
- if (!(driver->other->flags & TTY_DRIVER_DEVPTS_MEM)) {
+ if (!(driver->other->flags & TTY_DRIVER_DEVPTS_MEM))
driver->other->ttys[idx] = o_tty;
- }
if (!*o_tp_loc)
*o_tp_loc = o_tp;
if (!*o_ltp_loc)
@@ -2127,15 +2130,14 @@
o_tty->link = tty;
}
- /*
+ /*
* All structures have been allocated, so now we install them.
* Failures after this point use release_tty to clean up, so
* there's no need to null out the local pointers.
*/
- if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
+ if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM))
driver->ttys[idx] = tty;
- }
-
+
if (!*tp_loc)
*tp_loc = tp;
if (!*ltp_loc)
@@ -2148,7 +2150,7 @@
driver->refcount++;
tty->count++;
- /*
+ /*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_tty to clean up. No need
* to decrement the use counts, as release_tty doesn't care.
@@ -2185,7 +2187,7 @@
if (driver->type == TTY_DRIVER_TYPE_PTY &&
driver->subtype == PTY_TYPE_MASTER) {
/*
- * special case for PTY masters: only one open permitted,
+ * special case for PTY masters: only one open permitted,
* and the slave side open count is incremented as well.
*/
if (tty->count) {
@@ -2198,11 +2200,11 @@
tty->driver = driver; /* N.B. why do this every time?? */
/* FIXME */
- if(!test_bit(TTY_LDISC, &tty->flags))
+ if (!test_bit(TTY_LDISC, &tty->flags))
printk(KERN_ERR "init_dev but no ldisc\n");
success:
*ret_tty = tty;
-
+
/* All paths come through here to release the mutex */
end_init:
return retval;
@@ -2304,7 +2306,7 @@
* WSH 09/09/97: rewritten to avoid some nasty race conditions that could
* lead to double frees or releasing memory still in use.
*/
-static void release_dev(struct file * filp)
+static void release_dev(struct file *filp)
{
struct tty_struct *tty, *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
@@ -2312,9 +2314,10 @@
int idx;
char buf[64];
unsigned long flags;
-
+
tty = (struct tty_struct *)filp->private_data;
- if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "release_dev"))
+ if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode,
+ "release_dev"))
return;
check_tty_count(tty, "release_dev");
@@ -2374,7 +2377,7 @@
idx, tty->name);
return;
}
- if (o_tty->termios_locked !=
+ if (o_tty->termios_locked !=
tty->driver->other->termios_locked[idx]) {
printk(KERN_DEBUG "release_dev: other->termios_locked["
"%d] not o_termios_locked for (%s)\n",
@@ -2410,7 +2413,7 @@
while (1) {
/* Guard against races with tty->count changes elsewhere and
opens on /dev/tty */
-
+
mutex_lock(&tty_mutex);
tty_closing = tty->count <= 1;
o_tty_closing = o_tty &&
@@ -2444,11 +2447,11 @@
"active!\n", tty_name(tty, buf));
mutex_unlock(&tty_mutex);
schedule();
- }
+ }
/*
- * The closing flags are now consistent with the open counts on
- * both sides, and we've completed the last operation that could
+ * The closing flags are now consistent with the open counts on
+ * both sides, and we've completed the last operation that could
* block, so it's safe to proceed with closing.
*/
if (pty_master) {
@@ -2464,7 +2467,7 @@
tty->count, tty_name(tty, buf));
tty->count = 0;
}
-
+
/*
* We've decremented tty->count, so we need to remove this file
* descriptor off the tty->tty_files list; this serves two
@@ -2484,9 +2487,9 @@
* case of a pty we may have to wait around for the other side
* to close, and TTY_CLOSING makes sure we can't be reopened.
*/
- if(tty_closing)
+ if (tty_closing)
set_bit(TTY_CLOSING, &tty->flags);
- if(o_tty_closing)
+ if (o_tty_closing)
set_bit(TTY_CLOSING, &o_tty->flags);
/*
@@ -2507,7 +2510,7 @@
/* check whether both sides are closing ... */
if (!tty_closing || (o_tty && !o_tty_closing))
return;
-
+
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "freeing tty structure...");
#endif
@@ -2522,17 +2525,16 @@
/*
* Wait for ->hangup_work and ->buf.work handlers to terminate
*/
-
+
flush_scheduled_work();
-
+
/*
* Wait for any short term users (we know they are just driver
* side waiters as the file is closing so user count on the file
* side is zero.
*/
spin_lock_irqsave(&tty_ldisc_lock, flags);
- while(tty->ldisc.refcount)
- {
+ while (tty->ldisc.refcount) {
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0);
spin_lock_irqsave(&tty_ldisc_lock, flags);
@@ -2547,12 +2549,12 @@
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
tty_ldisc_put(tty->ldisc.num);
-
+
/*
* Switch the line discipline back
*/
tty_ldisc_assign(tty, tty_ldisc_get(N_TTY));
- tty_set_termios_ldisc(tty,N_TTY);
+ tty_set_termios_ldisc(tty, N_TTY);
if (o_tty) {
/* FIXME: could o_tty be in setldisc here ? */
clear_bit(TTY_LDISC, &o_tty->flags);
@@ -2560,7 +2562,7 @@
(o_tty->ldisc.close)(o_tty);
tty_ldisc_put(o_tty->ldisc.num);
tty_ldisc_assign(o_tty, tty_ldisc_get(N_TTY));
- tty_set_termios_ldisc(o_tty,N_TTY);
+ tty_set_termios_ldisc(o_tty, N_TTY);
}
/*
* The release_tty function takes care of the details of clearing
@@ -2600,7 +2602,7 @@
* ->siglock protects ->signal/->sighand
*/
-static int tty_open(struct inode * inode, struct file * filp)
+static int tty_open(struct inode *inode, struct file *filp)
{
struct tty_struct *tty;
int noctty, retval;
@@ -2610,15 +2612,15 @@
unsigned short saved_flags = filp->f_flags;
nonseekable_open(inode, filp);
-
+
retry_open:
noctty = filp->f_flags & O_NOCTTY;
index = -1;
retval = 0;
-
+
mutex_lock(&tty_mutex);
- if (device == MKDEV(TTYAUX_MAJOR,0)) {
+ if (device == MKDEV(TTYAUX_MAJOR, 0)) {
tty = get_current_tty();
if (!tty) {
mutex_unlock(&tty_mutex);
@@ -2631,7 +2633,7 @@
goto got_driver;
}
#ifdef CONFIG_VT
- if (device == MKDEV(TTY_MAJOR,0)) {
+ if (device == MKDEV(TTY_MAJOR, 0)) {
extern struct tty_driver *console_driver;
driver = console_driver;
index = fg_console;
@@ -2639,7 +2641,7 @@
goto got_driver;
}
#endif
- if (device == MKDEV(TTYAUX_MAJOR,1)) {
+ if (device == MKDEV(TTYAUX_MAJOR, 1)) {
driver = console_device(&index);
if (driver) {
/* Don't let /dev/console block */
@@ -2679,7 +2681,8 @@
}
filp->f_flags = saved_flags;
- if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
+ if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) &&
+ !capable(CAP_SYS_ADMIN))
retval = -EBUSY;
if (retval) {
@@ -2723,11 +2726,11 @@
* Allocate a unix98 pty master device from the ptmx driver.
*
* Locking: tty_mutex protects theinit_dev work. tty->count should
- protect the rest.
+ * protect the rest.
* allocated_ptys_lock handles the list of free pty numbers
*/
-static int ptmx_open(struct inode * inode, struct file * filp)
+static int ptmx_open(struct inode *inode, struct file *filp)
{
struct tty_struct *tty;
int retval;
@@ -2759,7 +2762,7 @@
mutex_lock(&tty_mutex);
retval = init_dev(ptm_driver, index, &tty);
mutex_unlock(&tty_mutex);
-
+
if (retval)
goto out;
@@ -2800,7 +2803,7 @@
* Takes bkl. See release_dev
*/
-static int tty_release(struct inode * inode, struct file * filp)
+static int tty_release(struct inode *inode, struct file *filp)
{
lock_kernel();
release_dev(filp);
@@ -2820,16 +2823,16 @@
* may be re-entered freely by other callers.
*/
-static unsigned int tty_poll(struct file * filp, poll_table * wait)
+static unsigned int tty_poll(struct file *filp, poll_table *wait)
{
- struct tty_struct * tty;
+ struct tty_struct *tty;
struct tty_ldisc *ld;
int ret = 0;
tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_poll"))
return 0;
-
+
ld = tty_ldisc_ref_wait(tty);
if (ld->poll)
ret = (ld->poll)(tty, filp, wait);
@@ -2837,15 +2840,15 @@
return ret;
}
-static int tty_fasync(int fd, struct file * filp, int on)
+static int tty_fasync(int fd, struct file *filp, int on)
{
- struct tty_struct * tty;
+ struct tty_struct *tty;
int retval;
tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync"))
return 0;
-
+
retval = fasync_helper(fd, filp, on, &tty->fasync);
if (retval <= 0)
return retval;
@@ -2893,7 +2896,7 @@
{
char ch, mbz = 0;
struct tty_ldisc *ld;
-
+
if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))
return -EPERM;
if (get_user(ch, p))
@@ -2915,7 +2918,7 @@
* is consistent.
*/
-static int tiocgwinsz(struct tty_struct *tty, struct winsize __user * arg)
+static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
{
int err;
@@ -2944,7 +2947,7 @@
*/
static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
- struct winsize __user * arg)
+ struct winsize __user *arg)
{
struct winsize tmp_ws;
@@ -2960,7 +2963,7 @@
if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col,
tmp_ws.ws_row)) {
mutex_unlock(&tty->termios_mutex);
- return -ENXIO;
+ return -ENXIO;
}
}
#endif
@@ -3070,7 +3073,7 @@
* This tty is already the controlling
* tty for another session group!
*/
- if ((arg == 1) && capable(CAP_SYS_ADMIN)) {
+ if (arg == 1 && capable(CAP_SYS_ADMIN)) {
/*
* Steal it away
*/
@@ -3303,14 +3306,14 @@
/*
* Split this up, as gcc can choke on it otherwise..
*/
-int tty_ioctl(struct inode * inode, struct file * file,
+int tty_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct tty_struct *tty, *real_tty;
void __user *p = (void __user *)arg;
int retval;
struct tty_ldisc *ld;
-
+
tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode, "tty_ioctl"))
return -EINVAL;
@@ -3326,13 +3329,13 @@
* Break handling by driver
*/
if (!tty->driver->break_ctl) {
- switch(cmd) {
+ switch (cmd) {
case TIOCSBRK:
case TIOCCBRK:
if (tty->driver->ioctl)
return tty->driver->ioctl(tty, file, cmd, arg);
return -EINVAL;
-
+
/* These two ioctl's always return success; even if */
/* the driver doesn't support them. */
case TCSBRK:
@@ -3354,7 +3357,7 @@
case TIOCSBRK:
case TIOCCBRK:
case TCSBRK:
- case TCSBRKP:
+ case TCSBRKP:
retval = tty_check_change(tty);
if (retval)
return retval;
@@ -3367,81 +3370,80 @@
}
switch (cmd) {
- case TIOCSTI:
- return tiocsti(tty, p);
- case TIOCGWINSZ:
- return tiocgwinsz(tty, p);
- case TIOCSWINSZ:
- return tiocswinsz(tty, real_tty, p);
- case TIOCCONS:
- return real_tty!=tty ? -EINVAL : tioccons(file);
- case FIONBIO:
- return fionbio(file, p);
- case TIOCEXCL:
- set_bit(TTY_EXCLUSIVE, &tty->flags);
- return 0;
- case TIOCNXCL:
- clear_bit(TTY_EXCLUSIVE, &tty->flags);
- return 0;
- case TIOCNOTTY:
- if (current->signal->tty != tty)
- return -ENOTTY;
- no_tty();
- return 0;
- case TIOCSCTTY:
- return tiocsctty(tty, arg);
- case TIOCGPGRP:
- return tiocgpgrp(tty, real_tty, p);
- case TIOCSPGRP:
- return tiocspgrp(tty, real_tty, p);
- case TIOCGSID:
- return tiocgsid(tty, real_tty, p);
- case TIOCGETD:
- /* FIXME: check this is ok */
- return put_user(tty->ldisc.num, (int __user *)p);
- case TIOCSETD:
- return tiocsetd(tty, p);
+ case TIOCSTI:
+ return tiocsti(tty, p);
+ case TIOCGWINSZ:
+ return tiocgwinsz(tty, p);
+ case TIOCSWINSZ:
+ return tiocswinsz(tty, real_tty, p);
+ case TIOCCONS:
+ return real_tty != tty ? -EINVAL : tioccons(file);
+ case FIONBIO:
+ return fionbio(file, p);
+ case TIOCEXCL:
+ set_bit(TTY_EXCLUSIVE, &tty->flags);
+ return 0;
+ case TIOCNXCL:
+ clear_bit(TTY_EXCLUSIVE, &tty->flags);
+ return 0;
+ case TIOCNOTTY:
+ if (current->signal->tty != tty)
+ return -ENOTTY;
+ no_tty();
+ return 0;
+ case TIOCSCTTY:
+ return tiocsctty(tty, arg);
+ case TIOCGPGRP:
+ return tiocgpgrp(tty, real_tty, p);
+ case TIOCSPGRP:
+ return tiocspgrp(tty, real_tty, p);
+ case TIOCGSID:
+ return tiocgsid(tty, real_tty, p);
+ case TIOCGETD:
+ /* FIXME: check this is ok */
+ return put_user(tty->ldisc.num, (int __user *)p);
+ case TIOCSETD:
+ return tiocsetd(tty, p);
#ifdef CONFIG_VT
- case TIOCLINUX:
- return tioclinux(tty, arg);
+ case TIOCLINUX:
+ return tioclinux(tty, arg);
#endif
- /*
- * Break handling
+ /*
+ * Break handling
+ */
+ case TIOCSBRK: /* Turn break on, unconditionally */
+ tty->driver->break_ctl(tty, -1);
+ return 0;
+
+ case TIOCCBRK: /* Turn break off, unconditionally */
+ tty->driver->break_ctl(tty, 0);
+ return 0;
+ case TCSBRK: /* SVID version: non-zero arg --> no break */
+ /* non-zero arg means wait for all output data
+ * to be sent (performed above) but don't send break.
+ * This is used by the tcdrain() termios function.
*/
- case TIOCSBRK: /* Turn break on, unconditionally */
- tty->driver->break_ctl(tty, -1);
- return 0;
-
- case TIOCCBRK: /* Turn break off, unconditionally */
- tty->driver->break_ctl(tty, 0);
- return 0;
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- /* non-zero arg means wait for all output data
- * to be sent (performed above) but don't send break.
- * This is used by the tcdrain() termios function.
- */
- if (!arg)
- return send_break(tty, 250);
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- return send_break(tty, arg ? arg*100 : 250);
+ if (!arg)
+ return send_break(tty, 250);
+ return 0;
+ case TCSBRKP: /* support for POSIX tcsendbreak() */
+ return send_break(tty, arg ? arg*100 : 250);
- case TIOCMGET:
- return tty_tiocmget(tty, file, p);
-
- case TIOCMSET:
- case TIOCMBIC:
- case TIOCMBIS:
- return tty_tiocmset(tty, file, cmd, p);
- case TCFLSH:
- switch (arg) {
- case TCIFLUSH:
- case TCIOFLUSH:
- /* flush tty buffer and allow ldisc to process ioctl */
- tty_buffer_flush(tty);
- break;
- }
+ case TIOCMGET:
+ return tty_tiocmget(tty, file, p);
+ case TIOCMSET:
+ case TIOCMBIC:
+ case TIOCMBIS:
+ return tty_tiocmset(tty, file, cmd, p);
+ case TCFLSH:
+ switch (arg) {
+ case TCIFLUSH:
+ case TCIOFLUSH:
+ /* flush tty buffer and allow ldisc to process ioctl */
+ tty_buffer_flush(tty);
break;
+ }
+ break;
}
if (tty->driver->ioctl) {
retval = (tty->driver->ioctl)(tty, file, cmd, arg);
@@ -3460,7 +3462,7 @@
}
#ifdef CONFIG_COMPAT
-static long tty_compat_ioctl(struct file * file, unsigned int cmd,
+static long tty_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
struct inode *inode = file->f_dentry->d_inode;
@@ -3491,7 +3493,7 @@
* prevent trojan horses by killing all processes associated with this
* tty when the user hits the "Secure Attention Key". Required for
* super-paranoid applications --- see the Orange Book for more details.
- *
+ *
* This code could be nicer; ideally it should send a HUP, wait a few
* seconds, then send a INT, and then a KILL signal. But you then
* have to coordinate with the init process, since all processes associated
@@ -3515,16 +3517,16 @@
int i;
struct file *filp;
struct fdtable *fdt;
-
+
if (!tty)
return;
session = tty->session;
-
+
tty_ldisc_flush(tty);
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
-
+
read_lock(&tasklist_lock);
/* Kill the entire session */
do_each_pid_task(session, PIDTYPE_SID, p) {
@@ -3552,7 +3554,7 @@
*/
spin_lock(&p->files->file_lock);
fdt = files_fdtable(p->files);
- for (i=0; i < fdt->max_fds; i++) {
+ for (i = 0; i < fdt->max_fds; i++) {
filp = fcheck_files(p->files, i);
if (!filp)
continue;
@@ -3606,7 +3608,7 @@
* while invoking the line discipline receive_buf method. The
* receive_buf method is single threaded for each tty instance.
*/
-
+
static void flush_to_ldisc(struct work_struct *work)
{
struct tty_struct *tty =
@@ -3622,7 +3624,8 @@
return;
spin_lock_irqsave(&tty->buf.lock, flags);
- set_bit(TTY_FLUSHING, &tty->flags); /* So we know a flush is running */
+ /* So we know a flush is running */
+ set_bit(TTY_FLUSHING, &tty->flags);
head = tty->buf.head;
if (head != NULL) {
tty->buf.head = NULL;
@@ -3795,7 +3798,8 @@
void tty_unregister_device(struct tty_driver *driver, unsigned index)
{
- device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index);
+ device_destroy(tty_class,
+ MKDEV(driver->major, driver->minor_start) + index);
}
EXPORT_SYMBOL(tty_register_device);
@@ -3859,7 +3863,7 @@
int tty_register_driver(struct tty_driver *driver)
{
int error;
- int i;
+ int i;
dev_t dev;
void **p = NULL;
@@ -3873,8 +3877,8 @@
}
if (!driver->major) {
- error = alloc_chrdev_region(&dev, driver->minor_start, driver->num,
- driver->name);
+ error = alloc_chrdev_region(&dev, driver->minor_start,
+ driver->num, driver->name);
if (!error) {
driver->major = MAJOR(dev);
driver->minor_start = MINOR(dev);
@@ -3891,7 +3895,8 @@
if (p) {
driver->ttys = (struct tty_struct **)p;
driver->termios = (struct ktermios **)(p + driver->num);
- driver->termios_locked = (struct ktermios **)(p + driver->num * 2);
+ driver->termios_locked = (struct ktermios **)
+ (p + driver->num * 2);
} else {
driver->ttys = NULL;
driver->termios = NULL;
@@ -3911,13 +3916,13 @@
if (!driver->put_char)
driver->put_char = tty_default_put_char;
-
+
mutex_lock(&tty_mutex);
list_add(&driver->tty_drivers, &tty_drivers);
mutex_unlock(&tty_mutex);
-
- if ( !(driver->flags & TTY_DRIVER_DYNAMIC_DEV) ) {
- for(i = 0; i < driver->num; i++)
+
+ if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {
+ for (i = 0; i < driver->num; i++)
tty_register_device(driver, i, NULL);
}
proc_tty_register_driver(driver);
@@ -4037,7 +4042,7 @@
(void) tty_register_ldisc(N_TTY, &tty_ldisc_N_TTY);
/*
- * set up the console device so that later boot sequences can
+ * set up the console device so that later boot sequences can
* inform about problems etc..
*/
call = __con_initcall_start;
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index d4b6d64..f95a80b 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -50,11 +50,11 @@
* Locking: none
*/
-void tty_wait_until_sent(struct tty_struct * tty, long timeout)
+void tty_wait_until_sent(struct tty_struct *tty, long timeout)
{
#ifdef TTY_DEBUG_WAIT_UNTIL_SENT
char buf[64];
-
+
printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty, buf));
#endif
if (!tty->driver->chars_in_buffer)
@@ -67,7 +67,6 @@
if (tty->driver->wait_until_sent)
tty->driver->wait_until_sent(tty, timeout);
}
-
EXPORT_SYMBOL(tty_wait_until_sent);
static void unset_locked_termios(struct ktermios *termios,
@@ -75,8 +74,8 @@
struct ktermios *locked)
{
int i;
-
-#define NOSET_MASK(x,y,z) (x = ((x) & ~(z)) | ((y) & (z)))
+
+#define NOSET_MASK(x, y, z) (x = ((x) & ~(z)) | ((y) & (z)))
if (!locked) {
printk(KERN_WARNING "Warning?!? termios_locked is NULL.\n");
@@ -88,7 +87,7 @@
NOSET_MASK(termios->c_cflag, old->c_cflag, locked->c_cflag);
NOSET_MASK(termios->c_lflag, old->c_lflag, locked->c_lflag);
termios->c_line = locked->c_line ? old->c_line : termios->c_line;
- for (i=0; i < NCCS; i++)
+ for (i = 0; i < NCCS; i++)
termios->c_cc[i] = locked->c_cc[i] ?
old->c_cc[i] : termios->c_cc[i];
/* FIXME: What should we do for i/ospeed */
@@ -163,7 +162,6 @@
}
return baud_table[cbaud];
}
-
EXPORT_SYMBOL(tty_termios_baud_rate);
/**
@@ -203,7 +201,6 @@
return tty_termios_baud_rate(termios);
#endif
}
-
EXPORT_SYMBOL(tty_termios_input_baud_rate);
/**
@@ -338,7 +335,6 @@
return baud;
}
-
EXPORT_SYMBOL(tty_get_baud_rate);
/**
@@ -361,7 +357,6 @@
new->c_ispeed = old->c_ispeed;
new->c_ospeed = old->c_ospeed;
}
-
EXPORT_SYMBOL(tty_termios_copy_hw);
/**
@@ -395,16 +390,16 @@
* Locking: termios_sem
*/
-static void change_termios(struct tty_struct * tty, struct ktermios * new_termios)
+static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
{
int canon_change;
struct ktermios old_termios = *tty->termios;
struct tty_ldisc *ld;
-
+
/*
* Perform the actual termios internal changes under lock.
*/
-
+
/* FIXME: we need to decide on some locking/ordering semantics
for the set_termios notification eventually */
@@ -419,7 +414,7 @@
tty->canon_data = 0;
tty->erasing = 0;
}
-
+
/* This bit should be in the ldisc code */
if (canon_change && !L_ICANON(tty) && tty->read_cnt)
/* Get characters left over from canonical mode. */
@@ -442,7 +437,7 @@
wake_up_interruptible(&tty->link->read_wait);
}
}
-
+
if (tty->driver->set_termios)
(*tty->driver->set_termios)(tty, &old_termios);
else
@@ -470,7 +465,7 @@
* Called functions take ldisc and termios_sem locks
*/
-static int set_termios(struct tty_struct * tty, void __user *arg, int opt)
+static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
{
struct ktermios tmp_termios;
struct tty_ldisc *ld;
@@ -501,19 +496,19 @@
return -EFAULT;
#endif
- /* If old style Bfoo values are used then load c_ispeed/c_ospeed with the real speed
- so its unconditionally usable */
+ /* If old style Bfoo values are used then load c_ispeed/c_ospeed
+ * with the real speed so its unconditionally usable */
tmp_termios.c_ispeed = tty_termios_input_baud_rate(&tmp_termios);
tmp_termios.c_ospeed = tty_termios_baud_rate(&tmp_termios);
ld = tty_ldisc_ref(tty);
-
+
if (ld != NULL) {
if ((opt & TERMIOS_FLUSH) && ld->flush_buffer)
ld->flush_buffer(tty);
tty_ldisc_deref(ld);
}
-
+
if (opt & TERMIOS_WAIT) {
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
@@ -529,14 +524,14 @@
return 0;
}
-static int get_termio(struct tty_struct * tty, struct termio __user * termio)
+static int get_termio(struct tty_struct *tty, struct termio __user *termio)
{
if (kernel_termios_to_user_termio(termio, tty->termios))
return -EFAULT;
return 0;
}
-static unsigned long inq_canon(struct tty_struct * tty)
+static unsigned long inq_canon(struct tty_struct *tty)
{
int nr, head, tail;
@@ -561,7 +556,7 @@
*
* The "sg_flags" translation is a joke..
*/
-static int get_sgflags(struct tty_struct * tty)
+static int get_sgflags(struct tty_struct *tty)
{
int flags = 0;
@@ -579,7 +574,7 @@
return flags;
}
-static int get_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb)
+static int get_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
{
struct sgttyb tmp;
@@ -590,11 +585,11 @@
tmp.sg_kill = tty->termios->c_cc[VKILL];
tmp.sg_flags = get_sgflags(tty);
mutex_unlock(&tty->termios_mutex);
-
+
return copy_to_user(sgttyb, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
-static void set_sgflags(struct ktermios * termios, int flags)
+static void set_sgflags(struct ktermios *termios, int flags)
{
termios->c_iflag = ICRNL | IXON;
termios->c_oflag = 0;
@@ -631,7 +626,7 @@
* Locking: termios_sem
*/
-static int set_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb)
+static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
{
int retval;
struct sgttyb tmp;
@@ -640,7 +635,7 @@
retval = tty_check_change(tty);
if (retval)
return retval;
-
+
if (copy_from_user(&tmp, sgttyb, sizeof(tmp)))
return -EFAULT;
@@ -651,7 +646,8 @@
set_sgflags(&termios, tmp.sg_flags);
/* Try and encode into Bfoo format */
#ifdef BOTHER
- tty_termios_encode_baud_rate(&termios, termios.c_ispeed, termios.c_ospeed);
+ tty_termios_encode_baud_rate(&termios, termios.c_ispeed,
+ termios.c_ospeed);
#endif
mutex_unlock(&tty->termios_mutex);
change_termios(tty, &termios);
@@ -660,7 +656,7 @@
#endif
#ifdef TIOCGETC
-static int get_tchars(struct tty_struct * tty, struct tchars __user * tchars)
+static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars)
{
struct tchars tmp;
@@ -673,7 +669,7 @@
return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
-static int set_tchars(struct tty_struct * tty, struct tchars __user * tchars)
+static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars)
{
struct tchars tmp;
@@ -690,20 +686,22 @@
#endif
#ifdef TIOCGLTC
-static int get_ltchars(struct tty_struct * tty, struct ltchars __user * ltchars)
+static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
{
struct ltchars tmp;
tmp.t_suspc = tty->termios->c_cc[VSUSP];
- tmp.t_dsuspc = tty->termios->c_cc[VSUSP]; /* what is dsuspc anyway? */
+ /* what is dsuspc anyway? */
+ tmp.t_dsuspc = tty->termios->c_cc[VSUSP];
tmp.t_rprntc = tty->termios->c_cc[VREPRINT];
- tmp.t_flushc = tty->termios->c_cc[VEOL2]; /* what is flushc anyway? */
+ /* what is flushc anyway? */
+ tmp.t_flushc = tty->termios->c_cc[VEOL2];
tmp.t_werasc = tty->termios->c_cc[VWERASE];
tmp.t_lnextc = tty->termios->c_cc[VLNEXT];
return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
-static int set_ltchars(struct tty_struct * tty, struct ltchars __user * ltchars)
+static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
{
struct ltchars tmp;
@@ -711,9 +709,11 @@
return -EFAULT;
tty->termios->c_cc[VSUSP] = tmp.t_suspc;
- tty->termios->c_cc[VEOL2] = tmp.t_dsuspc; /* what is dsuspc anyway? */
+ /* what is dsuspc anyway? */
+ tty->termios->c_cc[VEOL2] = tmp.t_dsuspc;
tty->termios->c_cc[VREPRINT] = tmp.t_rprntc;
- tty->termios->c_cc[VEOL2] = tmp.t_flushc; /* what is flushc anyway? */
+ /* what is flushc anyway? */
+ tty->termios->c_cc[VEOL2] = tmp.t_flushc;
tty->termios->c_cc[VWERASE] = tmp.t_werasc;
tty->termios->c_cc[VLNEXT] = tmp.t_lnextc;
return 0;
@@ -761,10 +761,10 @@
* consistent mode setting.
*/
-int tty_mode_ioctl(struct tty_struct * tty, struct file *file,
+int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct tty_struct * real_tty;
+ struct tty_struct *real_tty;
void __user *p = (void __user *)arg;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -775,100 +775,100 @@
switch (cmd) {
#ifdef TIOCGETP
- case TIOCGETP:
- return get_sgttyb(real_tty, (struct sgttyb __user *) arg);
- case TIOCSETP:
- case TIOCSETN:
- return set_sgttyb(real_tty, (struct sgttyb __user *) arg);
+ case TIOCGETP:
+ return get_sgttyb(real_tty, (struct sgttyb __user *) arg);
+ case TIOCSETP:
+ case TIOCSETN:
+ return set_sgttyb(real_tty, (struct sgttyb __user *) arg);
#endif
#ifdef TIOCGETC
- case TIOCGETC:
- return get_tchars(real_tty, p);
- case TIOCSETC:
- return set_tchars(real_tty, p);
+ case TIOCGETC:
+ return get_tchars(real_tty, p);
+ case TIOCSETC:
+ return set_tchars(real_tty, p);
#endif
#ifdef TIOCGLTC
- case TIOCGLTC:
- return get_ltchars(real_tty, p);
- case TIOCSLTC:
- return set_ltchars(real_tty, p);
+ case TIOCGLTC:
+ return get_ltchars(real_tty, p);
+ case TIOCSLTC:
+ return set_ltchars(real_tty, p);
#endif
- case TCSETSF:
- return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_OLD);
- case TCSETSW:
- return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_OLD);
- case TCSETS:
- return set_termios(real_tty, p, TERMIOS_OLD);
+ case TCSETSF:
+ return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_OLD);
+ case TCSETSW:
+ return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_OLD);
+ case TCSETS:
+ return set_termios(real_tty, p, TERMIOS_OLD);
#ifndef TCGETS2
- case TCGETS:
- if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios))
- return -EFAULT;
- return 0;
+ case TCGETS:
+ if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios))
+ return -EFAULT;
+ return 0;
#else
- case TCGETS:
- if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios))
- return -EFAULT;
- return 0;
- case TCGETS2:
- if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios))
- return -EFAULT;
- return 0;
- case TCSETSF2:
- return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT);
- case TCSETSW2:
- return set_termios(real_tty, p, TERMIOS_WAIT);
- case TCSETS2:
- return set_termios(real_tty, p, 0);
+ case TCGETS:
+ if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios))
+ return -EFAULT;
+ return 0;
+ case TCGETS2:
+ if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios))
+ return -EFAULT;
+ return 0;
+ case TCSETSF2:
+ return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT);
+ case TCSETSW2:
+ return set_termios(real_tty, p, TERMIOS_WAIT);
+ case TCSETS2:
+ return set_termios(real_tty, p, 0);
#endif
- case TCGETA:
- return get_termio(real_tty, p);
- case TCSETAF:
- return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_TERMIO);
- case TCSETAW:
- return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_TERMIO);
- case TCSETA:
- return set_termios(real_tty, p, TERMIOS_TERMIO);
+ case TCGETA:
+ return get_termio(real_tty, p);
+ case TCSETAF:
+ return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_TERMIO);
+ case TCSETAW:
+ return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_TERMIO);
+ case TCSETA:
+ return set_termios(real_tty, p, TERMIOS_TERMIO);
#ifndef TCGETS2
- case TIOCGLCKTRMIOS:
- if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
- return -EFAULT;
- return 0;
-
- case TIOCSLCKTRMIOS:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg))
- return -EFAULT;
- return 0;
+ case TIOCGLCKTRMIOS:
+ if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
+ return -EFAULT;
+ return 0;
+ case TIOCSLCKTRMIOS:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (user_termios_to_kernel_termios(real_tty->termios_locked,
+ (struct termios __user *) arg))
+ return -EFAULT;
+ return 0;
#else
- case TIOCGLCKTRMIOS:
- if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
- return -EFAULT;
- return 0;
-
- case TIOCSLCKTRMIOS:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg))
- return -EFAULT;
+ case TIOCGLCKTRMIOS:
+ if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
+ return -EFAULT;
+ return 0;
+ case TIOCSLCKTRMIOS:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (user_termios_to_kernel_termios_1(real_tty->termios_locked,
+ (struct termios __user *) arg))
+ return -EFAULT;
return 0;
#endif
- case TIOCGSOFTCAR:
- return put_user(C_CLOCAL(tty) ? 1 : 0, (int __user *)arg);
- case TIOCSSOFTCAR:
- if (get_user(arg, (unsigned int __user *) arg))
- return -EFAULT;
- mutex_lock(&tty->termios_mutex);
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- mutex_unlock(&tty->termios_mutex);
- return 0;
- default:
- return -ENOIOCTLCMD;
+ case TIOCGSOFTCAR:
+ return put_user(C_CLOCAL(tty) ? 1 : 0,
+ (int __user *)arg);
+ case TIOCSSOFTCAR:
+ if (get_user(arg, (unsigned int __user *) arg))
+ return -EFAULT;
+ mutex_lock(&tty->termios_mutex);
+ tty->termios->c_cflag =
+ ((tty->termios->c_cflag & ~CLOCAL) |
+ (arg ? CLOCAL : 0));
+ mutex_unlock(&tty->termios_mutex);
+ return 0;
+ default:
+ return -ENOIOCTLCMD;
}
}
-
EXPORT_SYMBOL_GPL(tty_mode_ioctl);
int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
@@ -899,13 +899,12 @@
tty_ldisc_deref(ld);
return 0;
}
-
EXPORT_SYMBOL_GPL(tty_perform_flush);
-int n_tty_ioctl(struct tty_struct * tty, struct file * file,
+int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct tty_struct * real_tty;
+ struct tty_struct *real_tty;
int retval;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -915,68 +914,67 @@
real_tty = tty;
switch (cmd) {
- case TCXONC:
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- switch (arg) {
- case TCOOFF:
- if (!tty->flow_stopped) {
- tty->flow_stopped = 1;
- stop_tty(tty);
- }
- break;
- case TCOON:
- if (tty->flow_stopped) {
- tty->flow_stopped = 0;
- start_tty(tty);
- }
- break;
- case TCIOFF:
- if (STOP_CHAR(tty) != __DISABLED_CHAR)
- return send_prio_char(tty, STOP_CHAR(tty));
- break;
- case TCION:
- if (START_CHAR(tty) != __DISABLED_CHAR)
- return send_prio_char(tty, START_CHAR(tty));
- break;
- default:
- return -EINVAL;
+ case TCXONC:
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ switch (arg) {
+ case TCOOFF:
+ if (!tty->flow_stopped) {
+ tty->flow_stopped = 1;
+ stop_tty(tty);
}
- return 0;
- case TCFLSH:
- return tty_perform_flush(tty, arg);
- case TIOCOUTQ:
- return put_user(tty->driver->chars_in_buffer ?
- tty->driver->chars_in_buffer(tty) : 0,
- (int __user *) arg);
- case TIOCINQ:
- retval = tty->read_cnt;
- if (L_ICANON(tty))
- retval = inq_canon(tty);
- return put_user(retval, (unsigned int __user *) arg);
- case TIOCPKT:
- {
- int pktmode;
-
- if (tty->driver->type != TTY_DRIVER_TYPE_PTY ||
- tty->driver->subtype != PTY_TYPE_MASTER)
- return -ENOTTY;
- if (get_user(pktmode, (int __user *) arg))
- return -EFAULT;
- if (pktmode) {
- if (!tty->packet) {
- tty->packet = 1;
- tty->link->ctrl_status = 0;
- }
- } else
- tty->packet = 0;
- return 0;
- }
+ break;
+ case TCOON:
+ if (tty->flow_stopped) {
+ tty->flow_stopped = 0;
+ start_tty(tty);
+ }
+ break;
+ case TCIOFF:
+ if (STOP_CHAR(tty) != __DISABLED_CHAR)
+ return send_prio_char(tty, STOP_CHAR(tty));
+ break;
+ case TCION:
+ if (START_CHAR(tty) != __DISABLED_CHAR)
+ return send_prio_char(tty, START_CHAR(tty));
+ break;
default:
- /* Try the mode commands */
- return tty_mode_ioctl(tty, file, cmd, arg);
+ return -EINVAL;
}
-}
+ return 0;
+ case TCFLSH:
+ return tty_perform_flush(tty, arg);
+ case TIOCOUTQ:
+ return put_user(tty->driver->chars_in_buffer ?
+ tty->driver->chars_in_buffer(tty) : 0,
+ (int __user *) arg);
+ case TIOCINQ:
+ retval = tty->read_cnt;
+ if (L_ICANON(tty))
+ retval = inq_canon(tty);
+ return put_user(retval, (unsigned int __user *) arg);
+ case TIOCPKT:
+ {
+ int pktmode;
+ if (tty->driver->type != TTY_DRIVER_TYPE_PTY ||
+ tty->driver->subtype != PTY_TYPE_MASTER)
+ return -ENOTTY;
+ if (get_user(pktmode, (int __user *) arg))
+ return -EFAULT;
+ if (pktmode) {
+ if (!tty->packet) {
+ tty->packet = 1;
+ tty->link->ctrl_status = 0;
+ }
+ } else
+ tty->packet = 0;
+ return 0;
+ }
+ default:
+ /* Try the mode commands */
+ return tty_mode_ioctl(tty, file, cmd, arg);
+ }
+}
EXPORT_SYMBOL(n_tty_ioctl);
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 1412d7b..653265a 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -250,6 +250,28 @@
list_add(&dev->list, &dmi_devices);
}
+static void __init dmi_save_extended_devices(const struct dmi_header *dm)
+{
+ const u8 *d = (u8*) dm + 5;
+ struct dmi_device *dev;
+
+ /* Skip disabled device */
+ if ((*d & 0x80) == 0)
+ return;
+
+ dev = dmi_alloc(sizeof(*dev));
+ if (!dev) {
+ printk(KERN_ERR "dmi_save_extended_devices: out of memory.\n");
+ return;
+ }
+
+ dev->type = *d-- & 0x7f;
+ dev->name = dmi_string(dm, *d);
+ dev->device_data = NULL;
+
+ list_add(&dev->list, &dmi_devices);
+}
+
/*
* Process a DMI table entry. Right now all we care about are the BIOS
* and machine entries. For 2.5 we should pull the smbus controller info
@@ -292,6 +314,9 @@
break;
case 38: /* IPMI Device Information */
dmi_save_ipmi_device(dm);
+ break;
+ case 41: /* Onboard Devices Extended Information */
+ dmi_save_extended_devices(dm);
}
}
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index 06190b1..38fbfb8 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -17,7 +17,6 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/major.h>
#include <linux/interrupt.h>
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index f32e031..708c5ae 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -1,6 +1,4 @@
/*
- * $Id: analog.c,v 1.68 2002/01/22 20:18:32 vojtech Exp $
- *
* Copyright (c) 1996-2001 Vojtech Pavlik
*/
@@ -164,6 +162,10 @@
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "PCC"
+#elif defined(CONFIG_MN10300)
+#define GET_TIME(x) do { x = get_cycles(); } while (0)
+#define DELTA(x, y) ((x) - (y))
+#define TIME_NAME "TSC"
#else
#define FAKE_TIME
static unsigned long analog_faketime = 0;
diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c
index 2dd1b57..6d7c47e 100644
--- a/drivers/isdn/capi/capifs.c
+++ b/drivers/isdn/capi/capifs.c
@@ -52,6 +52,7 @@
gid_t gid = 0;
umode_t mode = 0600;
char *this_char;
+ char *new_opt = kstrdup(data, GFP_KERNEL);
this_char = NULL;
while ((this_char = strsep(&data, ",")) != NULL) {
@@ -72,11 +73,16 @@
return -EINVAL;
}
}
+
+ kfree(s->s_options);
+ s->s_options = new_opt;
+
config.setuid = setuid;
config.setgid = setgid;
config.uid = uid;
config.gid = gid;
config.mode = mode;
+
return 0;
}
@@ -84,6 +90,7 @@
{
.statfs = simple_statfs,
.remount_fs = capifs_remount,
+ .show_options = generic_show_options,
};
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 851a3b0..859814f 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -18,6 +18,13 @@
comment "LED drivers"
+config LEDS_ATMEL_PWM
+ tristate "LED Support using Atmel PWM outputs"
+ depends on LEDS_CLASS && ATMEL_PWM
+ help
+ This option enables support for LEDs driven using outputs
+ of the dedicated PWM controller found on newer Atmel SOCs.
+
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
depends on LEDS_CLASS && PXA_SHARP_C7xx
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index bc6afc8..84ced3b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
+obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
new file mode 100644
index 0000000..af61f55
--- /dev/null
+++ b/drivers/leds/leds-atmel-pwm.c
@@ -0,0 +1,157 @@
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/atmel_pwm.h>
+
+
+struct pwmled {
+ struct led_classdev cdev;
+ struct pwm_channel pwmc;
+ struct gpio_led *desc;
+ u32 mult;
+ u8 active_low;
+};
+
+
+/*
+ * For simplicity, we use "brightness" as if it were a linear function
+ * of PWM duty cycle. However, a logarithmic function of duty cycle is
+ * probably a better match for perceived brightness: two is half as bright
+ * as four, four is half as bright as eight, etc
+ */
+static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
+{
+ struct pwmled *led;
+
+ /* update the duty cycle for the *next* period */
+ led = container_of(cdev, struct pwmled, cdev);
+ pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
+}
+
+/*
+ * NOTE: we reuse the platform_data structure of GPIO leds,
+ * but repurpose its "gpio" number as a PWM channel number.
+ */
+static int __init pwmled_probe(struct platform_device *pdev)
+{
+ const struct gpio_led_platform_data *pdata;
+ struct pwmled *leds;
+ unsigned i;
+ int status;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata || pdata->num_leds < 1)
+ return -ENODEV;
+
+ leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ struct pwmled *led = leds + i;
+ const struct gpio_led *dat = pdata->leds + i;
+ u32 tmp;
+
+ led->cdev.name = dat->name;
+ led->cdev.brightness = LED_OFF;
+ led->cdev.brightness_set = pwmled_brightness;
+ led->cdev.default_trigger = dat->default_trigger;
+
+ led->active_low = dat->active_low;
+
+ status = pwm_channel_alloc(dat->gpio, &led->pwmc);
+ if (status < 0)
+ goto err;
+
+ /*
+ * Prescale clock by 2^x, so PWM counts in low MHz.
+ * Start each cycle with the LED active, so increasing
+ * the duty cycle gives us more time on (== brighter).
+ */
+ tmp = 5;
+ if (!led->active_low)
+ tmp |= PWM_CPR_CPOL;
+ pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
+
+ /*
+ * Pick a period so PWM cycles at 100+ Hz; and a multiplier
+ * for scaling duty cycle: brightness * mult.
+ */
+ tmp = (led->pwmc.mck / (1 << 5)) / 100;
+ tmp /= 255;
+ led->mult = tmp;
+ pwm_channel_writel(&led->pwmc, PWM_CDTY,
+ led->cdev.brightness * 255);
+ pwm_channel_writel(&led->pwmc, PWM_CPRD,
+ LED_FULL * tmp);
+
+ pwm_channel_enable(&led->pwmc);
+
+ /* Hand it over to the LED framework */
+ status = led_classdev_register(&pdev->dev, &led->cdev);
+ if (status < 0) {
+ pwm_channel_free(&led->pwmc);
+ goto err;
+ }
+ }
+
+ platform_set_drvdata(pdev, leds);
+ return 0;
+
+err:
+ if (i > 0) {
+ for (i = i - 1; i >= 0; i--) {
+ led_classdev_unregister(&leds[i].cdev);
+ pwm_channel_free(&leds[i].pwmc);
+ }
+ }
+ kfree(leds);
+
+ return status;
+}
+
+static int __exit pwmled_remove(struct platform_device *pdev)
+{
+ const struct gpio_led_platform_data *pdata;
+ struct pwmled *leds;
+ unsigned i;
+
+ pdata = pdev->dev.platform_data;
+ leds = platform_get_drvdata(pdev);
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ struct pwmled *led = leds + i;
+
+ led_classdev_unregister(&led->cdev);
+ pwm_channel_free(&led->pwmc);
+ }
+
+ kfree(leds);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver pwmled_driver = {
+ .driver = {
+ .name = "leds-atmel-pwm",
+ .owner = THIS_MODULE,
+ },
+ /* REVISIT add suspend() and resume() methods */
+ .remove = __exit_p(pwmled_remove),
+};
+
+static int __init modinit(void)
+{
+ return platform_driver_probe(&pwmled_driver, pwmled_probe);
+}
+module_init(modinit);
+
+static void __exit modexit(void)
+{
+ platform_driver_unregister(&pwmled_driver);
+}
+module_exit(modexit);
+
+MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
+MODULE_LICENSE("GPL");
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 84f85e2..1b2ec0b 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -47,7 +47,7 @@
/* Since the virtio infrastructure hands us a pointer to the virtio_device all
* the time, it helps to have a curt macro to get a pointer to the struct
* lguest_device it's enclosed in. */
-#define to_lgdev(vdev) container_of(vdev, struct lguest_device, vdev)
+#define to_lgdev(vd) container_of(vd, struct lguest_device, vdev)
/*D:130
* Device configurations
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4e7f000..c143a86 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -13,6 +13,15 @@
if MISC_DEVICES
+config ATMEL_PWM
+ tristate "Atmel AT32/AT91 PWM support"
+ depends on AVR32 || ARCH_AT91
+ help
+ This option enables device driver support for the PWM channels
+ on certain Atmel prcoessors. Pulse Width Modulation is used for
+ purposes including software controlled power-efficent backlights
+ on LCD displays, motor control, and waveform generation.
+
config IBM_ASM
tristate "Device driver for IBM RSA service processor"
depends on X86 && PCI && INPUT && EXPERIMENTAL
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7f13549..3b12f5d 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
+obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_LKDTM) += lkdtm.o
diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c
new file mode 100644
index 0000000..f8d3b9a
--- /dev/null
+++ b/drivers/misc/atmel_pwm.c
@@ -0,0 +1,409 @@
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/atmel_pwm.h>
+
+
+/*
+ * This is a simple driver for the PWM controller found in various newer
+ * Atmel SOCs, including the AVR32 series and the AT91sam9263.
+ *
+ * Chips with current Linux ports have only 4 PWM channels, out of max 32.
+ * AT32UC3A and AT32UC3B chips have 7 channels (but currently no Linux).
+ * Docs are inconsistent about the width of the channel counter registers;
+ * it's at least 16 bits, but several places say 20 bits.
+ */
+#define PWM_NCHAN 4 /* max 32 */
+
+struct pwm {
+ spinlock_t lock;
+ struct platform_device *pdev;
+ u32 mask;
+ int irq;
+ void __iomem *base;
+ struct clk *clk;
+ struct pwm_channel *channel[PWM_NCHAN];
+ void (*handler[PWM_NCHAN])(struct pwm_channel *);
+};
+
+
+/* global PWM controller registers */
+#define PWM_MR 0x00
+#define PWM_ENA 0x04
+#define PWM_DIS 0x08
+#define PWM_SR 0x0c
+#define PWM_IER 0x10
+#define PWM_IDR 0x14
+#define PWM_IMR 0x18
+#define PWM_ISR 0x1c
+
+static inline void pwm_writel(const struct pwm *p, unsigned offset, u32 val)
+{
+ __raw_writel(val, p->base + offset);
+}
+
+static inline u32 pwm_readl(const struct pwm *p, unsigned offset)
+{
+ return __raw_readl(p->base + offset);
+}
+
+static inline void __iomem *pwmc_regs(const struct pwm *p, int index)
+{
+ return p->base + 0x200 + index * 0x20;
+}
+
+static struct pwm *pwm;
+
+static void pwm_dumpregs(struct pwm_channel *ch, char *tag)
+{
+ struct device *dev = &pwm->pdev->dev;
+
+ dev_dbg(dev, "%s: mr %08x, sr %08x, imr %08x\n",
+ tag,
+ pwm_readl(pwm, PWM_MR),
+ pwm_readl(pwm, PWM_SR),
+ pwm_readl(pwm, PWM_IMR));
+ dev_dbg(dev,
+ "pwm ch%d - mr %08x, dty %u, prd %u, cnt %u\n",
+ ch->index,
+ pwm_channel_readl(ch, PWM_CMR),
+ pwm_channel_readl(ch, PWM_CDTY),
+ pwm_channel_readl(ch, PWM_CPRD),
+ pwm_channel_readl(ch, PWM_CCNT));
+}
+
+
+/**
+ * pwm_channel_alloc - allocate an unused PWM channel
+ * @index: identifies the channel
+ * @ch: structure to be initialized
+ *
+ * Drivers allocate PWM channels according to the board's wiring, and
+ * matching board-specific setup code. Returns zero or negative errno.
+ */
+int pwm_channel_alloc(int index, struct pwm_channel *ch)
+{
+ unsigned long flags;
+ int status = 0;
+
+ /* insist on PWM init, with this signal pinned out */
+ if (!pwm || !(pwm->mask & 1 << index))
+ return -ENODEV;
+
+ if (index < 0 || index >= PWM_NCHAN || !ch)
+ return -EINVAL;
+ memset(ch, 0, sizeof *ch);
+
+ spin_lock_irqsave(&pwm->lock, flags);
+ if (pwm->channel[index])
+ status = -EBUSY;
+ else {
+ clk_enable(pwm->clk);
+
+ ch->regs = pwmc_regs(pwm, index);
+ ch->index = index;
+
+ /* REVISIT: ap7000 seems to go 2x as fast as we expect!! */
+ ch->mck = clk_get_rate(pwm->clk);
+
+ pwm->channel[index] = ch;
+ pwm->handler[index] = NULL;
+
+ /* channel and irq are always disabled when we return */
+ pwm_writel(pwm, PWM_DIS, 1 << index);
+ pwm_writel(pwm, PWM_IDR, 1 << index);
+ }
+ spin_unlock_irqrestore(&pwm->lock, flags);
+ return status;
+}
+EXPORT_SYMBOL(pwm_channel_alloc);
+
+static int pwmcheck(struct pwm_channel *ch)
+{
+ int index;
+
+ if (!pwm)
+ return -ENODEV;
+ if (!ch)
+ return -EINVAL;
+ index = ch->index;
+ if (index < 0 || index >= PWM_NCHAN || pwm->channel[index] != ch)
+ return -EINVAL;
+
+ return index;
+}
+
+/**
+ * pwm_channel_free - release a previously allocated channel
+ * @ch: the channel being released
+ *
+ * The channel is completely shut down (counter and IRQ disabled),
+ * and made available for re-use. Returns zero, or negative errno.
+ */
+int pwm_channel_free(struct pwm_channel *ch)
+{
+ unsigned long flags;
+ int t;
+
+ spin_lock_irqsave(&pwm->lock, flags);
+ t = pwmcheck(ch);
+ if (t >= 0) {
+ pwm->channel[t] = NULL;
+ pwm->handler[t] = NULL;
+
+ /* channel and irq are always disabled when we return */
+ pwm_writel(pwm, PWM_DIS, 1 << t);
+ pwm_writel(pwm, PWM_IDR, 1 << t);
+
+ clk_disable(pwm->clk);
+ t = 0;
+ }
+ spin_unlock_irqrestore(&pwm->lock, flags);
+ return t;
+}
+EXPORT_SYMBOL(pwm_channel_free);
+
+int __pwm_channel_onoff(struct pwm_channel *ch, int enabled)
+{
+ unsigned long flags;
+ int t;
+
+ /* OMITTED FUNCTIONALITY: starting several channels in synch */
+
+ spin_lock_irqsave(&pwm->lock, flags);
+ t = pwmcheck(ch);
+ if (t >= 0) {
+ pwm_writel(pwm, enabled ? PWM_ENA : PWM_DIS, 1 << t);
+ t = 0;
+ pwm_dumpregs(ch, enabled ? "enable" : "disable");
+ }
+ spin_unlock_irqrestore(&pwm->lock, flags);
+
+ return t;
+}
+EXPORT_SYMBOL(__pwm_channel_onoff);
+
+/**
+ * pwm_clk_alloc - allocate and configure CLKA or CLKB
+ * @prescale: from 0..10, the power of two used to divide MCK
+ * @div: from 1..255, the linear divisor to use
+ *
+ * Returns PWM_CPR_CLKA, PWM_CPR_CLKB, or negative errno. The allocated
+ * clock will run with a period of (2^prescale * div) / MCK, or twice as
+ * long if center aligned PWM output is used. The clock must later be
+ * deconfigured using pwm_clk_free().
+ */
+int pwm_clk_alloc(unsigned prescale, unsigned div)
+{
+ unsigned long flags;
+ u32 mr;
+ u32 val = (prescale << 8) | div;
+ int ret = -EBUSY;
+
+ if (prescale >= 10 || div == 0 || div > 255)
+ return -EINVAL;
+
+ spin_lock_irqsave(&pwm->lock, flags);
+ mr = pwm_readl(pwm, PWM_MR);
+ if ((mr & 0xffff) == 0) {
+ mr |= val;
+ ret = PWM_CPR_CLKA;
+ }
+ if ((mr & (0xffff << 16)) == 0) {
+ mr |= val << 16;
+ ret = PWM_CPR_CLKB;
+ }
+ if (ret > 0)
+ pwm_writel(pwm, PWM_MR, mr);
+ spin_unlock_irqrestore(&pwm->lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(pwm_clk_alloc);
+
+/**
+ * pwm_clk_free - deconfigure and release CLKA or CLKB
+ *
+ * Reverses the effect of pwm_clk_alloc().
+ */
+void pwm_clk_free(unsigned clk)
+{
+ unsigned long flags;
+ u32 mr;
+
+ spin_lock_irqsave(&pwm->lock, flags);
+ mr = pwm_readl(pwm, PWM_MR);
+ if (clk == PWM_CPR_CLKA)
+ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 0));
+ if (clk == PWM_CPR_CLKB)
+ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 16));
+ spin_unlock_irqrestore(&pwm->lock, flags);
+}
+EXPORT_SYMBOL(pwm_clk_free);
+
+/**
+ * pwm_channel_handler - manage channel's IRQ handler
+ * @ch: the channel
+ * @handler: the handler to use, possibly NULL
+ *
+ * If the handler is non-null, the handler will be called after every
+ * period of this PWM channel. If the handler is null, this channel
+ * won't generate an IRQ.
+ */
+int pwm_channel_handler(struct pwm_channel *ch,
+ void (*handler)(struct pwm_channel *ch))
+{
+ unsigned long flags;
+ int t;
+
+ spin_lock_irqsave(&pwm->lock, flags);
+ t = pwmcheck(ch);
+ if (t >= 0) {
+ pwm->handler[t] = handler;
+ pwm_writel(pwm, handler ? PWM_IER : PWM_IDR, 1 << t);
+ t = 0;
+ }
+ spin_unlock_irqrestore(&pwm->lock, flags);
+
+ return t;
+}
+EXPORT_SYMBOL(pwm_channel_handler);
+
+static irqreturn_t pwm_irq(int id, void *_pwm)
+{
+ struct pwm *p = _pwm;
+ irqreturn_t handled = IRQ_NONE;
+ u32 irqstat;
+ int index;
+
+ spin_lock(&p->lock);
+
+ /* ack irqs, then handle them */
+ irqstat = pwm_readl(pwm, PWM_ISR);
+
+ while (irqstat) {
+ struct pwm_channel *ch;
+ void (*handler)(struct pwm_channel *ch);
+
+ index = ffs(irqstat) - 1;
+ irqstat &= ~(1 << index);
+ ch = pwm->channel[index];
+ handler = pwm->handler[index];
+ if (handler && ch) {
+ spin_unlock(&p->lock);
+ handler(ch);
+ spin_lock(&p->lock);
+ handled = IRQ_HANDLED;
+ }
+ }
+
+ spin_unlock(&p->lock);
+ return handled;
+}
+
+static int __init pwm_probe(struct platform_device *pdev)
+{
+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int irq = platform_get_irq(pdev, 0);
+ u32 *mp = pdev->dev.platform_data;
+ struct pwm *p;
+ int status = -EIO;
+
+ if (pwm)
+ return -EBUSY;
+ if (!r || irq < 0 || !mp || !*mp)
+ return -ENODEV;
+ if (*mp & ~((1<<PWM_NCHAN)-1)) {
+ dev_warn(&pdev->dev, "mask 0x%x ... more than %d channels\n",
+ *mp, PWM_NCHAN);
+ return -EINVAL;
+ }
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ spin_lock_init(&p->lock);
+ p->pdev = pdev;
+ p->mask = *mp;
+ p->irq = irq;
+ p->base = ioremap(r->start, r->end - r->start + 1);
+ if (!p->base)
+ goto fail;
+ p->clk = clk_get(&pdev->dev, "mck");
+ if (IS_ERR(p->clk)) {
+ status = PTR_ERR(p->clk);
+ p->clk = NULL;
+ goto fail;
+ }
+
+ status = request_irq(irq, pwm_irq, 0, pdev->name, p);
+ if (status < 0)
+ goto fail;
+
+ pwm = p;
+ platform_set_drvdata(pdev, p);
+
+ return 0;
+
+fail:
+ if (p->clk)
+ clk_put(p->clk);
+ if (p->base)
+ iounmap(p->base);
+
+ kfree(p);
+ return status;
+}
+
+static int __exit pwm_remove(struct platform_device *pdev)
+{
+ struct pwm *p = platform_get_drvdata(pdev);
+
+ if (p != pwm)
+ return -EINVAL;
+
+ clk_enable(pwm->clk);
+ pwm_writel(pwm, PWM_DIS, (1 << PWM_NCHAN) - 1);
+ pwm_writel(pwm, PWM_IDR, (1 << PWM_NCHAN) - 1);
+ clk_disable(pwm->clk);
+
+ pwm = NULL;
+
+ free_irq(p->irq, p);
+ clk_put(p->clk);
+ iounmap(p->base);
+ kfree(p);
+
+ return 0;
+}
+
+static struct platform_driver atmel_pwm_driver = {
+ .driver = {
+ .name = "atmel_pwm",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(pwm_remove),
+
+ /* NOTE: PWM can keep running in AVR32 "idle" and "frozen" states;
+ * and all AT91sam9263 states, albeit at reduced clock rate if
+ * MCK becomes the slow clock (i.e. what Linux labels STR).
+ */
+};
+
+static int __init pwm_init(void)
+{
+ return platform_driver_probe(&atmel_pwm_driver, pwm_probe);
+}
+module_init(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&atmel_pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9cc25fd..50c2b60 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -879,7 +879,8 @@
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BLACKFIN
+ depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
+ SOC_AU1X00 || BLACKFIN || MN10300
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 271c28d..51d4134 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -450,8 +450,20 @@
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
#define SMC_IRQ_FLAGS (-1) /* from resource */
+#elif defined(CONFIG_MN10300)
+
+/*
+ * MN10300/AM33 configuration
+ */
+
+#include <asm/unit/smc91111.h>
+
#else
+/*
+ * Default configuration
+ */
+
#define SMC_CAN_USE_8BIT 1
#define SMC_CAN_USE_16BIT 1
#define SMC_CAN_USE_32BIT 1
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index d449b15..b7bcdcc 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -35,7 +35,8 @@
config PARPORT_PC
tristate "PC-style hardware"
- depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && (!M68K || ISA)
+ depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
+ (!M68K || ISA) && !MN10300
---help---
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
index 525312f..2e21af4 100644
--- a/drivers/parport/ieee1284_ops.c
+++ b/drivers/parport/ieee1284_ops.c
@@ -888,7 +888,7 @@
/* Event 59: set nSelectIn (nAStrb) high */
parport_frob_control (port, PARPORT_CONTROL_SELECT,
- PARPORT_CONTROL_SELECT);
+ 0);
/* Event 60: wait for Busy to go low */
if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 9f04d17..4d1ce2e 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -38,6 +38,7 @@
obj-$(CONFIG_PPC) += setup-bus.o
obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
obj-$(CONFIG_X86_VISWS) += setup-irq.o
+obj-$(CONFIG_MN10300) += setup-bus.o
#
# ACPI Related PCI FW Functions
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 31fa6c9..a4c3089 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -692,6 +692,23 @@
DMA_TLB_PSI_FLUSH, non_present_entry_flush);
}
+static void iommu_disable_protect_mem_regions(struct intel_iommu *iommu)
+{
+ u32 pmen;
+ unsigned long flags;
+
+ spin_lock_irqsave(&iommu->register_lock, flags);
+ pmen = readl(iommu->reg + DMAR_PMEN_REG);
+ pmen &= ~DMA_PMEN_EPM;
+ writel(pmen, iommu->reg + DMAR_PMEN_REG);
+
+ /* wait for the protected region status bit to clear */
+ IOMMU_WAIT_OP(iommu, DMAR_PMEN_REG,
+ readl, !(pmen & DMA_PMEN_PRS), pmen);
+
+ spin_unlock_irqrestore(&iommu->register_lock, flags);
+}
+
static int iommu_enable_translation(struct intel_iommu *iommu)
{
u32 sts;
@@ -728,7 +745,7 @@
/* iommu interrupt handling. Most stuff are MSI-like. */
-static char *fault_reason_strings[] =
+static const char *fault_reason_strings[] =
{
"Software",
"Present bit in root entry is clear",
@@ -743,14 +760,13 @@
"non-zero reserved fields in RTP",
"non-zero reserved fields in CTP",
"non-zero reserved fields in PTE",
- "Unknown"
};
-#define MAX_FAULT_REASON_IDX ARRAY_SIZE(fault_reason_strings) - 1
+#define MAX_FAULT_REASON_IDX (ARRAY_SIZE(fault_reason_strings) - 1)
-char *dmar_get_fault_reason(u8 fault_reason)
+const char *dmar_get_fault_reason(u8 fault_reason)
{
- if (fault_reason >= MAX_FAULT_REASON_IDX)
- return fault_reason_strings[MAX_FAULT_REASON_IDX - 1];
+ if (fault_reason > MAX_FAULT_REASON_IDX)
+ return "Unknown";
else
return fault_reason_strings[fault_reason];
}
@@ -808,7 +824,7 @@
static int iommu_page_fault_do_one(struct intel_iommu *iommu, int type,
u8 fault_reason, u16 source_id, u64 addr)
{
- char *reason;
+ const char *reason;
reason = dmar_get_fault_reason(fault_reason);
@@ -1730,6 +1746,8 @@
iommu_flush_context_global(iommu, 0);
iommu_flush_iotlb_global(iommu, 0);
+ iommu_disable_protect_mem_regions(iommu);
+
ret = iommu_enable_translation(iommu);
if (ret)
goto error;
diff --git a/drivers/pci/intel-iommu.h b/drivers/pci/intel-iommu.h
index 0e48626..07f5f63 100644
--- a/drivers/pci/intel-iommu.h
+++ b/drivers/pci/intel-iommu.h
@@ -140,6 +140,10 @@
#define DMA_TLB_IH_NONLEAF (((u64)1) << 6)
#define DMA_TLB_MAX_SIZE (0x3f)
+/* PMEN_REG */
+#define DMA_PMEN_EPM (((u32)1)<<31)
+#define DMA_PMEN_PRS (((u32)1)<<0)
+
/* GCMD_REG */
#define DMA_GCMD_TE (((u32)1) << 31)
#define DMA_GCMD_SRTP (((u32)1) << 30)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index b8a4bd9..77f7a7f 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -305,7 +305,7 @@
return au_io_out_map[offset];
}
-#elif defined (CONFIG_SERIAL_8250_RM9K)
+#elif defined(CONFIG_SERIAL_8250_RM9K)
static const u8
regmap_in[8] = {
@@ -475,7 +475,7 @@
serial_outp(up, UART_DLM, value >> 8 & 0xff);
}
-#if defined (CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_SERIAL_8250_AU1X00)
/* Au1x00 haven't got a standard divisor latch */
static int serial_dl_read(struct uart_8250_port *up)
{
@@ -492,7 +492,7 @@
else
_serial_dl_write(up, value);
}
-#elif defined (CONFIG_SERIAL_8250_RM9K)
+#elif defined(CONFIG_SERIAL_8250_RM9K)
static int serial_dl_read(struct uart_8250_port *up)
{
return (up->port.iotype == UPIO_RM9000) ?
@@ -1185,8 +1185,8 @@
irqs = probe_irq_on();
serial_outp(up, UART_MCR, 0);
- udelay (10);
- if (up->port.flags & UPF_FOURPORT) {
+ udelay(10);
+ if (up->port.flags & UPF_FOURPORT) {
serial_outp(up, UART_MCR,
UART_MCR_DTR | UART_MCR_RTS);
} else {
@@ -1199,7 +1199,7 @@
(void)serial_inp(up, UART_IIR);
(void)serial_inp(up, UART_MSR);
serial_outp(up, UART_TX, 0xFF);
- udelay (20);
+ udelay(20);
irq = probe_irq_off(irqs);
serial_outp(up, UART_MCR, save_mcr);
@@ -1343,7 +1343,7 @@
uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
- ignore_char:
+ignore_char:
lsr = serial_inp(up, UART_LSR);
} while ((lsr & UART_LSR_DR) && (max_count-- > 0));
spin_unlock(&up->port.lock);
@@ -1633,7 +1633,8 @@
serial_out(up, UART_IER, ier);
/* Standard timer interval plus 0.2s to keep the port running */
- mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout) + HZ/5);
+ mod_timer(&up->timer,
+ jiffies + poll_timeout(up->port.timeout) + HZ / 5);
}
static unsigned int serial8250_tx_empty(struct uart_port *port)
@@ -1844,7 +1845,7 @@
up->timer.function = serial8250_backup_timeout;
up->timer.data = (unsigned long)up;
mod_timer(&up->timer, jiffies +
- poll_timeout(up->port.timeout) + HZ/5);
+ poll_timeout(up->port.timeout) + HZ / 5);
}
}
@@ -2173,6 +2174,7 @@
}
serial8250_set_mctrl(&up->port, up->port.mctrl);
spin_unlock_irqrestore(&up->port.lock, flags);
+ tty_termios_encode_baud_rate(termios, baud, baud);
}
static void
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index 1f16de7..38776e8 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -82,7 +82,8 @@
serial_out(port, UART_TX, c);
}
-static void __init early_serial8250_write(struct console *console, const char *s, unsigned int count)
+static void __init early_serial8250_write(struct console *console,
+ const char *s, unsigned int count)
{
struct uart_port *port = &early_device.port;
unsigned int ier;
@@ -132,7 +133,8 @@
serial_out(port, UART_LCR, c & ~UART_LCR_DLAB);
}
-static int __init parse_options(struct early_serial8250_device *device, char *options)
+static int __init parse_options(struct early_serial8250_device *device,
+ char *options)
{
struct uart_port *port = &device->port;
int mmio, length;
@@ -145,8 +147,10 @@
port->iotype = UPIO_MEM;
port->mapbase = simple_strtoul(options + 5, &options, 0);
#ifdef CONFIG_FIX_EARLYCON_MEM
- set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, port->mapbase & PAGE_MASK);
- port->membase = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+ set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
+ port->mapbase & PAGE_MASK);
+ port->membase =
+ (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
port->membase += port->mapbase & ~PAGE_MASK;
#else
port->membase = ioremap(port->mapbase, 64);
@@ -165,7 +169,8 @@
} else
return -EINVAL;
- if ((options = strchr(options, ','))) {
+ options = strchr(options, ',');
+ if (options) {
options++;
device->baud = simple_strtoul(options, NULL, 0);
length = min(strcspn(options, " "), sizeof(device->options));
@@ -179,7 +184,7 @@
printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n",
mmio ? "MMIO" : "I/O port",
mmio ? (unsigned long long) port->mapbase
- : (unsigned long long) port->iobase,
+ : (unsigned long long) port->iobase,
device->options);
return 0;
}
@@ -199,7 +204,8 @@
if (device->port.membase || device->port.iobase)
return 0;
- if ((err = parse_options(device, options)) < 0)
+ err = parse_options(device, options);
+ if (err < 0)
return err;
init_port(device);
@@ -219,7 +225,8 @@
}
options = strchr(cmdline, ',') + 1;
- if ((err = early_serial8250_setup(options)) < 0)
+ err = early_serial8250_setup(options);
+ if (err < 0)
return err;
register_console(&early_serial8250_console);
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index c5d0add..4eb7437 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -25,8 +25,7 @@
#include "8250.h"
-static int __init
-serial_init_chip(struct parisc_device *dev)
+static int __init serial_init_chip(struct parisc_device *dev)
{
struct uart_port port;
unsigned long address;
@@ -38,18 +37,17 @@
* what we have here is a missing parent device, so tell
* the user what they're missing.
*/
- if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
- printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
+ if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
+ printk(KERN_INFO
+ "Serial: device 0x%lx not configured.\n"
"Enable support for Wax, Lasi, Asp or Dino.\n",
dev->hpa.start);
- }
return -ENODEV;
}
address = dev->hpa.start;
- if (dev->id.sversion != 0x8d) {
+ if (dev->id.sversion != 0x8d)
address += 0x800;
- }
memset(&port, 0, sizeof(port));
port.iotype = UPIO_MEM;
@@ -63,11 +61,12 @@
err = serial8250_register_port(&port);
if (err < 0) {
- printk(KERN_WARNING "serial8250_register_port returned error %d\n", err);
+ printk(KERN_WARNING
+ "serial8250_register_port returned error %d\n", err);
iounmap(port.membase);
return err;
}
-
+
return 0;
}
diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c
index 2cf0953..0e1410f 100644
--- a/drivers/serial/8250_hp300.c
+++ b/drivers/serial/8250_hp300.c
@@ -36,7 +36,7 @@
#ifdef CONFIG_HPDCA
static int __devinit hpdca_init_one(struct dio_dev *d,
- const struct dio_device_id *ent);
+ const struct dio_device_id *ent);
static void __devexit hpdca_remove_one(struct dio_dev *d);
static struct dio_device_id hpdca_dio_tbl[] = {
@@ -85,7 +85,7 @@
#ifdef CONFIG_SERIAL_8250_CONSOLE
/*
- * Parse the bootinfo to find descriptions for headless console and
+ * Parse the bootinfo to find descriptions for headless console and
* debug serial ports and register them with the 8250 driver.
* This function should be called before serial_console_init() is called
* to make sure the serial console will be available for use. IA-64 kernel
@@ -126,13 +126,11 @@
printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
return 0;
#endif
- }
- else {
+ } else {
#ifdef CONFIG_HPDCA
unsigned long pa = dio_scodetophysaddr(scode);
- if (!pa) {
+ if (!pa)
return 0;
- }
printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode);
@@ -145,26 +143,23 @@
/* Enable board-interrupts */
out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
- if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) {
+ if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80)
add_preferred_console("ttyS", port.line, "9600n8");
- }
#else
printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
return 0;
#endif
}
- if (early_serial_setup(&port) < 0) {
+ if (early_serial_setup(&port) < 0)
printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n");
- }
-
return 0;
}
#endif /* CONFIG_SERIAL_8250_CONSOLE */
#ifdef CONFIG_HPDCA
static int __devinit hpdca_init_one(struct dio_dev *d,
- const struct dio_device_id *ent)
+ const struct dio_device_id *ent)
{
struct uart_port port;
int line;
@@ -210,7 +205,7 @@
static int __init hp300_8250_init(void)
{
- static int called = 0;
+ static int called;
#ifdef CONFIG_HPAPCI
int line;
unsigned long base;
@@ -239,13 +234,12 @@
* Port 1 is either the console or the DCA.
*/
for (i = 1; i < 4; i++) {
- /* Port 1 is the console on a 425e, on other machines it's mapped to
- * DCA.
+ /* Port 1 is the console on a 425e, on other machines it's
+ * mapped to DCA.
*/
#ifdef CONFIG_SERIAL_8250_CONSOLE
- if (i == 1) {
+ if (i == 1)
continue;
- }
#endif
/* Create new serial device */
@@ -259,7 +253,8 @@
/* Memory mapped I/O */
uport.iotype = UPIO_MEM;
- uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
+ | UPF_BOOT_AUTOCONF;
/* XXX - no interrupt support yet */
uport.irq = 0;
uport.uartclk = HPAPCI_BAUD_BASE * 16;
@@ -270,8 +265,8 @@
line = serial8250_register_port(&uport);
if (line < 0) {
- printk(KERN_NOTICE "8250_hp300: register_serial() APCI %d"
- " irq %d failed\n", i, uport.irq);
+ printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
+ " %d irq %d failed\n", i, uport.irq);
kfree(port);
continue;
}
diff --git a/drivers/serial/8250_hub6.c b/drivers/serial/8250_hub6.c
index daf569c..7609150 100644
--- a/drivers/serial/8250_hub6.c
+++ b/drivers/serial/8250_hub6.c
@@ -23,18 +23,18 @@
}
static struct plat_serial8250_port hub6_data[] = {
- HUB6(0,0),
- HUB6(0,1),
- HUB6(0,2),
- HUB6(0,3),
- HUB6(0,4),
- HUB6(0,5),
- HUB6(1,0),
- HUB6(1,1),
- HUB6(1,2),
- HUB6(1,3),
- HUB6(1,4),
- HUB6(1,5),
+ HUB6(0, 0),
+ HUB6(0, 1),
+ HUB6(0, 2),
+ HUB6(0, 3),
+ HUB6(0, 4),
+ HUB6(0, 5),
+ HUB6(1, 0),
+ HUB6(1, 1),
+ HUB6(1, 2),
+ HUB6(1, 3),
+ HUB6(1, 4),
+ HUB6(1, 5),
{ },
};
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 0a4ac2b..a8bec49 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -140,7 +140,7 @@
struct uart_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
-
+
bar = FL_GET_BASE(board->flags);
if (idx < 4)
bar += idx;
@@ -227,8 +227,8 @@
return -ENODEV;
/* is firmware started? */
- pci_read_config_dword(dev, 0x44, (void*) &oldval);
- if (oldval == 0x00001000L) { /* RESET value */
+ pci_read_config_dword(dev, 0x44, (void *)&oldval);
+ if (oldval == 0x00001000L) { /* RESET value */
printk(KERN_DEBUG "Local i960 firmware missing");
return -ENODEV;
}
@@ -253,11 +253,11 @@
irq_config = 0x41;
if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
- dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) {
+ dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
irq_config = 0x43;
- }
+
if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
- (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
+ (dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
/*
* As the megawolf cards have the int pins active
* high, and have 2 UART chips, both ints must be
@@ -267,8 +267,6 @@
* deep FIFOs
*/
irq_config = 0x5b;
- }
-
/*
* enable/disable interrupts
*/
@@ -343,14 +341,14 @@
{
u8 __iomem *p;
- p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
+ p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
if (p == NULL)
return -ENOMEM;
/* Set bit-4 Control Register (UART RESET) in to reset the uarts */
- writeb(0x10,p + OCT_REG_CR_OFF);
+ writeb(0x10, p + OCT_REG_CR_OFF);
udelay(50);
- writeb(0x0,p + OCT_REG_CR_OFF);
+ writeb(0x0, p + OCT_REG_CR_OFF);
/* Set bit-2 (INTENABLE) of Control Register */
writeb(0x4, p + OCT_REG_CR_OFF);
@@ -367,10 +365,10 @@
{
u8 __iomem *p;
- p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
- if (p != NULL) {
+ p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
+ /* FIXME: What if resource_len < OCT_REG_CR_OFF */
+ if (p != NULL)
writeb(0, p + OCT_REG_CR_OFF);
- }
iounmap(p);
}
@@ -386,7 +384,7 @@
* with other OSes (like M$ DOS).
*
* SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
- *
+ *
* There is two family of SIIG serial cards with different PCI
* interface chip and different configuration methods:
* - 10x cards have control registers in IO and/or memory space;
@@ -489,21 +487,21 @@
static const unsigned short timedia_dual_port[] = {
0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
- 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
- 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
+ 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
+ 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
0xD079, 0
};
static const unsigned short timedia_quad_port[] = {
- 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
- 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
+ 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
+ 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
0xB157, 0
};
static const unsigned short timedia_eight_port[] = {
- 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
+ 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
};
@@ -656,7 +654,8 @@
ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
/* write INTCBAR - ioport */
- pci_write_config_dword(dev, ITE_887x_INTCBAR, inta_addr[i]);
+ pci_write_config_dword(dev, ITE_887x_INTCBAR,
+ inta_addr[i]);
ret = inb(inta_addr[i]);
if (ret != 0xff) {
/* ioport connected */
@@ -755,7 +754,7 @@
if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
return 1;
-
+
return setup_port(priv, port, bar, offset, board->reg_shift);
}
@@ -843,7 +842,7 @@
.init = pci_plx9050_init,
.setup = pci_default_setup,
.exit = __devexit_p(pci_plx9050_exit),
- },
+ },
{
.vendor = PCI_VENDOR_ID_PANACOM,
.device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
@@ -1032,7 +1031,7 @@
quirk_id_matches(quirk->device, dev->device) &&
quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
quirk_id_matches(quirk->subdevice, dev->subsystem_device))
- break;
+ break;
return quirk;
}
@@ -1711,7 +1710,7 @@
};
static const struct pci_device_id softmodem_blacklist[] = {
- { PCI_VDEVICE ( AL, 0x5457 ), }, /* ALi Corporation M5457 AC'97 Modem */
+ { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
};
/*
@@ -1724,13 +1723,13 @@
{
const struct pci_device_id *blacklist;
int num_iomem, num_port, first_port = -1, i;
-
+
/*
* If it is not a communications device or the programming
* interface is greater than 6, give up.
*
* (Should we try to make guesses for multiport serial devices
- * later?)
+ * later?)
*/
if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
@@ -1863,25 +1862,23 @@
break;
#ifdef SERIAL_DEBUG_PCI
- printk("Setup PCI port: port %x, irq %d, type %d\n",
+ printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n",
serial_port.iobase, serial_port.irq, serial_port.iotype);
#endif
-
+
priv->line[i] = serial8250_register_port(&serial_port);
if (priv->line[i] < 0) {
printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
break;
}
}
-
priv->nr = i;
-
return priv;
- err_deinit:
+err_deinit:
if (quirk->exit)
quirk->exit(dev);
- err_out:
+err_out:
return priv;
}
EXPORT_SYMBOL_GPL(pciserial_init_ports);
@@ -2171,22 +2168,22 @@
pbn_b0_8_1843200_200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_1_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_4_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_4_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -2201,11 +2198,11 @@
/*
* VScom SPCOM800, from sl@s.pl
*/
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_921600 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_4_921600 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN,
@@ -2223,27 +2220,27 @@
pbn_b2_4_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
- PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
pbn_b2_4_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
- PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
pbn_b2_8_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
- PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
pbn_b2_16_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST,
- PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
pbn_b2_16_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIRAS,
- PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
+ PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
pbn_b2_4_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIRAS,
- PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
+ PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
pbn_b2_8_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_EXSYS,
@@ -2269,10 +2266,12 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_8_115200 },
{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
- PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
+ PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
+ 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
- PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
+ 0, 0,
pbn_b0_4_1152000 },
/*
@@ -2312,7 +2311,7 @@
* Digitan DS560-558, from jimd@esoft.com
*/
{ PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_1_115200 },
/*
@@ -2320,16 +2319,16 @@
* The 400L and 800L have a custom setup quirk.
*/
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_2_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 84a054d..b82595c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -380,6 +380,21 @@
console is the device which receives all kernel messages and
warnings and which allows logins in single user mode).
+config SERIAL_ATMEL_PDC
+ bool "Support DMA transfers on AT91 / AT32 serial port"
+ depends on SERIAL_ATMEL
+ default y
+ help
+ Say Y here if you wish to use the PDC to do DMA transfers to
+ and from the Atmel AT91 / AT32 serial port. In order to
+ actually use DMA transfers, make sure that the use_dma_tx
+ and use_dma_rx members in the atmel_uart_data struct is set
+ appropriately for each port.
+
+ Note that break and error handling currently doesn't work
+ properly when DMA is enabled. Make sure that ports where
+ this matters don't use DMA.
+
config SERIAL_ATMEL_TTYAT
bool "Install as device ttyATn instead of ttySn"
depends on SERIAL_ATMEL=y
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 60f5290..fad245b 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -7,6 +7,8 @@
* Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
+ * DMA support added by Chip Coldwell.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -33,6 +35,7 @@
#include <linux/sysrq.h>
#include <linux/tty_flip.h>
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <linux/atmel_pdc.h>
#include <linux/atmel_serial.h>
@@ -46,6 +49,10 @@
#include <asm/arch/gpio.h>
#endif
+#define PDC_BUFFER_SIZE 512
+/* Revisit: We should calculate this based on the actual port settings */
+#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
+
#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
@@ -73,6 +80,7 @@
#define ATMEL_ISR_PASS_LIMIT 256
+/* UART registers. CR is write-only, hence no GET macro */
#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
@@ -86,8 +94,6 @@
#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
-// #define UART_GET_CR(port) __raw_readl((port)->membase + ATMEL_US_CR) // is write-only
-
/* PDC registers */
#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
@@ -100,12 +106,24 @@
#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
-//#define UART_PUT_TNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNPR)
-//#define UART_PUT_TNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNCR)
static int (*atmel_open_hook)(struct uart_port *);
static void (*atmel_close_hook)(struct uart_port *);
+struct atmel_dma_buffer {
+ unsigned char *buf;
+ dma_addr_t dma_addr;
+ unsigned int dma_size;
+ unsigned int ofs;
+};
+
+struct atmel_uart_char {
+ u16 status;
+ u16 ch;
+};
+
+#define ATMEL_SERIAL_RINGSIZE 1024
+
/*
* We wrap our port structure around the generic uart_port.
*/
@@ -114,6 +132,19 @@
struct clk *clk; /* uart clock */
unsigned short suspended; /* is port suspended? */
int break_active; /* break being received */
+
+ short use_dma_rx; /* enable PDC receiver */
+ short pdc_rx_idx; /* current PDC RX buffer */
+ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
+
+ short use_dma_tx; /* enable PDC transmitter */
+ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
+
+ struct tasklet_struct tasklet;
+ unsigned int irq_status;
+ unsigned int irq_status_prev;
+
+ struct circ_buf rx_ring;
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
@@ -122,6 +153,38 @@
static struct console atmel_console;
#endif
+static inline struct atmel_uart_port *
+to_atmel_uart_port(struct uart_port *uart)
+{
+ return container_of(uart, struct atmel_uart_port, uart);
+}
+
+#ifdef CONFIG_SERIAL_ATMEL_PDC
+static bool atmel_use_dma_rx(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ return atmel_port->use_dma_rx;
+}
+
+static bool atmel_use_dma_tx(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ return atmel_port->use_dma_tx;
+}
+#else
+static bool atmel_use_dma_rx(struct uart_port *port)
+{
+ return false;
+}
+
+static bool atmel_use_dma_tx(struct uart_port *port)
+{
+ return false;
+}
+#endif
+
/*
* Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
*/
@@ -141,8 +204,8 @@
#ifdef CONFIG_ARCH_AT91RM9200
if (cpu_is_at91rm9200()) {
/*
- * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
- * We need to drive the pin manually.
+ * AT91RM9200 Errata #39: RTS0 is not internally connected
+ * to PA21. We need to drive the pin manually.
*/
if (port->mapbase == AT91RM9200_BASE_US0) {
if (mctrl & TIOCM_RTS)
@@ -203,7 +266,12 @@
*/
static void atmel_stop_tx(struct uart_port *port)
{
- UART_PUT_IDR(port, ATMEL_US_TXRDY);
+ if (atmel_use_dma_tx(port)) {
+ /* disable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+ } else
+ UART_PUT_IDR(port, ATMEL_US_TXRDY);
}
/*
@@ -211,7 +279,17 @@
*/
static void atmel_start_tx(struct uart_port *port)
{
- UART_PUT_IER(port, ATMEL_US_TXRDY);
+ if (atmel_use_dma_tx(port)) {
+ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
+ /* The transmitter is already running. Yes, we
+ really need this.*/
+ return;
+
+ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+ /* re-enable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+ } else
+ UART_PUT_IER(port, ATMEL_US_TXRDY);
}
/*
@@ -219,7 +297,12 @@
*/
static void atmel_stop_rx(struct uart_port *port)
{
- UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ if (atmel_use_dma_rx(port)) {
+ /* disable PDC receive */
+ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
+ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+ } else
+ UART_PUT_IDR(port, ATMEL_US_RXRDY);
}
/*
@@ -227,7 +310,8 @@
*/
static void atmel_enable_ms(struct uart_port *port)
{
- UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
+ UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
+ | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
}
/*
@@ -242,22 +326,63 @@
}
/*
+ * Stores the incoming character in the ring buffer
+ */
+static void
+atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
+ unsigned int ch)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct circ_buf *ring = &atmel_port->rx_ring;
+ struct atmel_uart_char *c;
+
+ if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
+ /* Buffer overflow, ignore char */
+ return;
+
+ c = &((struct atmel_uart_char *)ring->buf)[ring->head];
+ c->status = status;
+ c->ch = ch;
+
+ /* Make sure the character is stored before we update head. */
+ smp_wmb();
+
+ ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
+}
+
+/*
+ * Deal with parity, framing and overrun errors.
+ */
+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
+{
+ /* clear error */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+
+ if (status & ATMEL_US_RXBRK) {
+ /* ignore side-effect */
+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
+ port->icount.brk++;
+ }
+ if (status & ATMEL_US_PARE)
+ port->icount.parity++;
+ if (status & ATMEL_US_FRAME)
+ port->icount.frame++;
+ if (status & ATMEL_US_OVRE)
+ port->icount.overrun++;
+}
+
+/*
* Characters received (called from interrupt handler)
*/
static void atmel_rx_chars(struct uart_port *port)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- struct tty_struct *tty = port->info->tty;
- unsigned int status, ch, flg;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int status, ch;
status = UART_GET_CSR(port);
while (status & ATMEL_US_RXRDY) {
ch = UART_GET_CHAR(port);
- port->icount.rx++;
-
- flg = TTY_NORMAL;
-
/*
* note that the error handling code is
* out of the main execution path
@@ -265,15 +390,14 @@
if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
| ATMEL_US_OVRE | ATMEL_US_RXBRK)
|| atmel_port->break_active)) {
- UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */
+
+ /* clear error */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+
if (status & ATMEL_US_RXBRK
&& !atmel_port->break_active) {
- status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
- port->icount.brk++;
atmel_port->break_active = 1;
UART_PUT_IER(port, ATMEL_US_RXBRK);
- if (uart_handle_break(port))
- goto ignore_char;
} else {
/*
* This is either the end-of-break
@@ -286,6 +410,228 @@
status &= ~ATMEL_US_RXBRK;
atmel_port->break_active = 0;
}
+ }
+
+ atmel_buffer_rx_char(port, status, ch);
+ status = UART_GET_CSR(port);
+ }
+
+ tasklet_schedule(&atmel_port->tasklet);
+}
+
+/*
+ * Transmit characters (called from tasklet with TXRDY interrupt
+ * disabled)
+ */
+static void atmel_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ return;
+
+ while (UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (!uart_circ_empty(xmit))
+ UART_PUT_IER(port, ATMEL_US_TXRDY);
+}
+
+/*
+ * receive interrupt handler.
+ */
+static void
+atmel_handle_receive(struct uart_port *port, unsigned int pending)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_use_dma_rx(port)) {
+ /*
+ * PDC receive. Just schedule the tasklet and let it
+ * figure out the details.
+ *
+ * TODO: We're not handling error flags correctly at
+ * the moment.
+ */
+ if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
+ UART_PUT_IDR(port, (ATMEL_US_ENDRX
+ | ATMEL_US_TIMEOUT));
+ tasklet_schedule(&atmel_port->tasklet);
+ }
+
+ if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE |
+ ATMEL_US_FRAME | ATMEL_US_PARE))
+ atmel_pdc_rxerr(port, pending);
+ }
+
+ /* Interrupt receive */
+ if (pending & ATMEL_US_RXRDY)
+ atmel_rx_chars(port);
+ else if (pending & ATMEL_US_RXBRK) {
+ /*
+ * End of break detected. If it came along with a
+ * character, atmel_rx_chars will handle it.
+ */
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
+ atmel_port->break_active = 0;
+ }
+}
+
+/*
+ * transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
+ */
+static void
+atmel_handle_transmit(struct uart_port *port, unsigned int pending)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_use_dma_tx(port)) {
+ /* PDC transmit */
+ if (pending & (ATMEL_US_ENDTX | ATMEL_US_TXBUFE)) {
+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+ tasklet_schedule(&atmel_port->tasklet);
+ }
+ } else {
+ /* Interrupt transmit */
+ if (pending & ATMEL_US_TXRDY) {
+ UART_PUT_IDR(port, ATMEL_US_TXRDY);
+ tasklet_schedule(&atmel_port->tasklet);
+ }
+ }
+}
+
+/*
+ * status flags interrupt handler.
+ */
+static void
+atmel_handle_status(struct uart_port *port, unsigned int pending,
+ unsigned int status)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
+ | ATMEL_US_CTSIC)) {
+ atmel_port->irq_status = status;
+ tasklet_schedule(&atmel_port->tasklet);
+ }
+}
+
+/*
+ * Interrupt handler
+ */
+static irqreturn_t atmel_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned int status, pending, pass_counter = 0;
+
+ do {
+ status = UART_GET_CSR(port);
+ pending = status & UART_GET_IMR(port);
+ if (!pending)
+ break;
+
+ atmel_handle_receive(port, pending);
+ atmel_handle_status(port, pending, status);
+ atmel_handle_transmit(port, pending);
+ } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Called from tasklet with ENDTX and TXBUFE interrupts disabled.
+ */
+static void atmel_tx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct circ_buf *xmit = &port->info->xmit;
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+ int count;
+
+ xmit->tail += pdc->ofs;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ port->icount.tx += pdc->ofs;
+ pdc->ofs = 0;
+
+ if (!uart_circ_empty(xmit)) {
+ /* more to transmit - setup next transfer */
+
+ /* disable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+ dma_sync_single_for_device(port->dev,
+ pdc->dma_addr,
+ pdc->dma_size,
+ DMA_TO_DEVICE);
+
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ pdc->ofs = count;
+
+ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
+ UART_PUT_TCR(port, count);
+ /* re-enable PDC transmit and interrupts */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+ } else {
+ /* nothing left to transmit - disable the transmitter */
+
+ /* disable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static void atmel_rx_from_ring(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct circ_buf *ring = &atmel_port->rx_ring;
+ unsigned int flg;
+ unsigned int status;
+
+ while (ring->head != ring->tail) {
+ struct atmel_uart_char c;
+
+ /* Make sure c is loaded after head. */
+ smp_rmb();
+
+ c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
+
+ ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
+
+ port->icount.rx++;
+ status = c.status;
+ flg = TTY_NORMAL;
+
+ /*
+ * note that the error handling code is
+ * out of the main execution path
+ */
+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
+ | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
+ if (status & ATMEL_US_RXBRK) {
+ /* ignore side-effect */
+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
+
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ }
if (status & ATMEL_US_PARE)
port->icount.parity++;
if (status & ATMEL_US_FRAME)
@@ -303,98 +649,142 @@
flg = TTY_FRAME;
}
- if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
- uart_insert_char(port, status, ATMEL_US_OVRE, ch, flg);
+ if (uart_handle_sysrq_char(port, c.ch))
+ continue;
- ignore_char:
- status = UART_GET_CSR(port);
+ uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
}
- tty_flip_buffer_push(tty);
+ /*
+ * Drop the lock here since it might end up calling
+ * uart_start(), which takes the lock.
+ */
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(port->info->tty);
+ spin_lock(&port->lock);
}
-/*
- * Transmit characters (called from interrupt handler)
- */
-static void atmel_tx_chars(struct uart_port *port)
+static void atmel_rx_from_dma(struct uart_port *port)
{
- struct circ_buf *xmit = &port->info->xmit;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct tty_struct *tty = port->info->tty;
+ struct atmel_dma_buffer *pdc;
+ int rx_idx = atmel_port->pdc_rx_idx;
+ unsigned int head;
+ unsigned int tail;
+ unsigned int count;
- if (port->x_char) {
- UART_PUT_CHAR(port, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- atmel_stop_tx(port);
- return;
- }
+ do {
+ /* Reset the UART timeout early so that we don't miss one */
+ UART_PUT_CR(port, ATMEL_US_STTTO);
- while (UART_GET_CSR(port) & ATMEL_US_TXRDY) {
- UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- }
+ pdc = &atmel_port->pdc_rx[rx_idx];
+ head = UART_GET_RPR(port) - pdc->dma_addr;
+ tail = pdc->ofs;
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
+ /* If the PDC has switched buffers, RPR won't contain
+ * any address within the current buffer. Since head
+ * is unsigned, we just need a one-way comparison to
+ * find out.
+ *
+ * In this case, we just need to consume the entire
+ * buffer and resubmit it for DMA. This will clear the
+ * ENDRX bit as well, so that we can safely re-enable
+ * all interrupts below.
+ */
+ head = min(head, pdc->dma_size);
- if (uart_circ_empty(xmit))
- atmel_stop_tx(port);
-}
+ if (likely(head != tail)) {
+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr,
+ pdc->dma_size, DMA_FROM_DEVICE);
-/*
- * Interrupt handler
- */
-static irqreturn_t atmel_interrupt(int irq, void *dev_id)
-{
- struct uart_port *port = dev_id;
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- unsigned int status, pending, pass_counter = 0;
-
- status = UART_GET_CSR(port);
- pending = status & UART_GET_IMR(port);
- while (pending) {
- /* Interrupt receive */
- if (pending & ATMEL_US_RXRDY)
- atmel_rx_chars(port);
- else if (pending & ATMEL_US_RXBRK) {
/*
- * End of break detected. If it came along
- * with a character, atmel_rx_chars will
- * handle it.
+ * head will only wrap around when we recycle
+ * the DMA buffer, and when that happens, we
+ * explicitly set tail to 0. So head will
+ * always be greater than tail.
*/
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
- UART_PUT_IDR(port, ATMEL_US_RXBRK);
- atmel_port->break_active = 0;
+ count = head - tail;
+
+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
+
+ dma_sync_single_for_device(port->dev, pdc->dma_addr,
+ pdc->dma_size, DMA_FROM_DEVICE);
+
+ port->icount.rx += count;
+ pdc->ofs = head;
}
- // TODO: All reads to CSR will clear these interrupts!
- if (pending & ATMEL_US_RIIC) port->icount.rng++;
- if (pending & ATMEL_US_DSRIC) port->icount.dsr++;
- if (pending & ATMEL_US_DCDIC)
+ /*
+ * If the current buffer is full, we need to check if
+ * the next one contains any additional data.
+ */
+ if (head >= pdc->dma_size) {
+ pdc->ofs = 0;
+ UART_PUT_RNPR(port, pdc->dma_addr);
+ UART_PUT_RNCR(port, pdc->dma_size);
+
+ rx_idx = !rx_idx;
+ atmel_port->pdc_rx_idx = rx_idx;
+ }
+ } while (head >= pdc->dma_size);
+
+ /*
+ * Drop the lock here since it might end up calling
+ * uart_start(), which takes the lock.
+ */
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(tty);
+ spin_lock(&port->lock);
+
+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+}
+
+/*
+ * tasklet handling tty stuff outside the interrupt handler.
+ */
+static void atmel_tasklet_func(unsigned long data)
+{
+ struct uart_port *port = (struct uart_port *)data;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int status;
+ unsigned int status_change;
+
+ /* The interrupt handler does not take the lock */
+ spin_lock(&port->lock);
+
+ if (atmel_use_dma_tx(port))
+ atmel_tx_dma(port);
+ else
+ atmel_tx_chars(port);
+
+ status = atmel_port->irq_status;
+ status_change = status ^ atmel_port->irq_status_prev;
+
+ if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
+ | ATMEL_US_DCD | ATMEL_US_CTS)) {
+ /* TODO: All reads to CSR will clear these interrupts! */
+ if (status_change & ATMEL_US_RI)
+ port->icount.rng++;
+ if (status_change & ATMEL_US_DSR)
+ port->icount.dsr++;
+ if (status_change & ATMEL_US_DCD)
uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
- if (pending & ATMEL_US_CTSIC)
+ if (status_change & ATMEL_US_CTS)
uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
- if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
- wake_up_interruptible(&port->info->delta_msr_wait);
- /* Interrupt transmit */
- if (pending & ATMEL_US_TXRDY)
- atmel_tx_chars(port);
+ wake_up_interruptible(&port->info->delta_msr_wait);
- if (pass_counter++ > ATMEL_ISR_PASS_LIMIT)
- break;
-
- status = UART_GET_CSR(port);
- pending = status & UART_GET_IMR(port);
+ atmel_port->irq_status_prev = status;
}
- return IRQ_HANDLED;
+
+ if (atmel_use_dma_rx(port))
+ atmel_rx_from_dma(port);
+ else
+ atmel_rx_from_ring(port);
+
+ spin_unlock(&port->lock);
}
/*
@@ -402,6 +792,8 @@
*/
static int atmel_startup(struct uart_port *port)
{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct tty_struct *tty = port->info->tty;
int retval;
/*
@@ -414,13 +806,64 @@
/*
* Allocate the IRQ
*/
- retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, "atmel_serial", port);
+ retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
+ tty ? tty->name : "atmel_serial", port);
if (retval) {
printk("atmel_serial: atmel_startup - Can't get irq\n");
return retval;
}
/*
+ * Initialize DMA (if necessary)
+ */
+ if (atmel_use_dma_rx(port)) {
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+
+ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
+ if (pdc->buf == NULL) {
+ if (i != 0) {
+ dma_unmap_single(port->dev,
+ atmel_port->pdc_rx[0].dma_addr,
+ PDC_BUFFER_SIZE,
+ DMA_FROM_DEVICE);
+ kfree(atmel_port->pdc_rx[0].buf);
+ }
+ free_irq(port->irq, port);
+ return -ENOMEM;
+ }
+ pdc->dma_addr = dma_map_single(port->dev,
+ pdc->buf,
+ PDC_BUFFER_SIZE,
+ DMA_FROM_DEVICE);
+ pdc->dma_size = PDC_BUFFER_SIZE;
+ pdc->ofs = 0;
+ }
+
+ atmel_port->pdc_rx_idx = 0;
+
+ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
+ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
+
+ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
+ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
+ }
+ if (atmel_use_dma_tx(port)) {
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+ struct circ_buf *xmit = &port->info->xmit;
+
+ pdc->buf = xmit->buf;
+ pdc->dma_addr = dma_map_single(port->dev,
+ pdc->buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ pdc->dma_size = UART_XMIT_SIZE;
+ pdc->ofs = 0;
+ }
+
+ /*
* If there is a specific "open" function (to register
* control line interrupts)
*/
@@ -436,9 +879,21 @@
* Finally, enable the serial port
*/
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
- UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
+ /* enable xmit & rcvr */
+ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
+ if (atmel_use_dma_rx(port)) {
+ /* set UART timeout */
+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
+ UART_PUT_CR(port, ATMEL_US_STTTO);
+
+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+ /* enable PDC controller */
+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
+ } else {
+ /* enable receive only */
+ UART_PUT_IER(port, ATMEL_US_RXRDY);
+ }
return 0;
}
@@ -448,6 +903,38 @@
*/
static void atmel_shutdown(struct uart_port *port)
{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ /*
+ * Ensure everything is stopped.
+ */
+ atmel_stop_rx(port);
+ atmel_stop_tx(port);
+
+ /*
+ * Shut-down the DMA.
+ */
+ if (atmel_use_dma_rx(port)) {
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+
+ dma_unmap_single(port->dev,
+ pdc->dma_addr,
+ pdc->dma_size,
+ DMA_FROM_DEVICE);
+ kfree(pdc->buf);
+ }
+ }
+ if (atmel_use_dma_tx(port)) {
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+
+ dma_unmap_single(port->dev,
+ pdc->dma_addr,
+ pdc->dma_size,
+ DMA_TO_DEVICE);
+ }
+
/*
* Disable all interrupts, port and break condition.
*/
@@ -470,45 +957,48 @@
/*
* Power / Clock management.
*/
-static void atmel_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
+static void atmel_serial_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
{
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
switch (state) {
- case 0:
- /*
- * Enable the peripheral clock for this serial port.
- * This is called on uart_open() or a resume event.
- */
- clk_enable(atmel_port->clk);
- break;
- case 3:
- /*
- * Disable the peripheral clock for this serial port.
- * This is called on uart_close() or a suspend event.
- */
- clk_disable(atmel_port->clk);
- break;
- default:
- printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
+ case 0:
+ /*
+ * Enable the peripheral clock for this serial port.
+ * This is called on uart_open() or a resume event.
+ */
+ clk_enable(atmel_port->clk);
+ break;
+ case 3:
+ /*
+ * Disable the peripheral clock for this serial port.
+ * This is called on uart_close() or a suspend event.
+ */
+ clk_disable(atmel_port->clk);
+ break;
+ default:
+ printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
}
}
/*
* Change the port parameters
*/
-static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
+static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned long flags;
unsigned int mode, imr, quot, baud;
/* Get current mode register */
- mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
+ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
+ | ATMEL_US_NBSTOP | ATMEL_US_PAR);
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
quot = uart_get_divisor(port, baud);
- if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
quot /= 8;
mode |= ATMEL_US_USCLKS_MCK_DIV8;
}
@@ -535,18 +1025,17 @@
/* parity */
if (termios->c_cflag & PARENB) {
- if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
+ /* Mark or Space parity */
+ if (termios->c_cflag & CMSPAR) {
if (termios->c_cflag & PARODD)
mode |= ATMEL_US_PAR_MARK;
else
mode |= ATMEL_US_PAR_SPACE;
- }
- else if (termios->c_cflag & PARODD)
+ } else if (termios->c_cflag & PARODD)
mode |= ATMEL_US_PAR_ODD;
else
mode |= ATMEL_US_PAR_EVEN;
- }
- else
+ } else
mode |= ATMEL_US_PAR_NONE;
spin_lock_irqsave(&port->lock, flags);
@@ -557,6 +1046,10 @@
if (termios->c_iflag & (BRKINT | PARMRK))
port->read_status_mask |= ATMEL_US_RXBRK;
+ if (atmel_use_dma_rx(port))
+ /* need to enable error interrupts */
+ UART_PUT_IER(port, port->read_status_mask);
+
/*
* Characters to ignore
*/
@@ -572,16 +1065,16 @@
if (termios->c_iflag & IGNPAR)
port->ignore_status_mask |= ATMEL_US_OVRE;
}
-
- // TODO: Ignore all characters if CREAD is set.
+ /* TODO: Ignore all characters if CREAD is set.*/
/* update the per-port timeout */
uart_update_timeout(port, termios->c_cflag, baud);
- /* disable interrupts and drain transmitter */
- imr = UART_GET_IMR(port); /* get interrupt mask */
- UART_PUT_IDR(port, -1); /* disable all interrupts */
- while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) { barrier(); }
+ /* save/disable interrupts and drain transmitter */
+ imr = UART_GET_IMR(port);
+ UART_PUT_IDR(port, -1);
+ while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
+ cpu_relax();
/* disable receiver and transmitter */
UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
@@ -707,7 +1200,8 @@
/*
* Configure the port from the platform device resource info.
*/
-static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct platform_device *pdev)
+static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
+ struct platform_device *pdev)
{
struct uart_port *port = &atmel_port->uart;
struct atmel_uart_data *data = pdev->dev.platform_data;
@@ -722,6 +1216,11 @@
port->mapbase = pdev->resource[0].start;
port->irq = pdev->resource[1].start;
+ tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
+ (unsigned long)port);
+
+ memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
+
if (data->regs)
/* Already mapped by setup code */
port->membase = data->regs;
@@ -730,11 +1229,17 @@
port->membase = NULL;
}
- if (!atmel_port->clk) { /* for console, the clock could already be configured */
+ /* for console, the clock could already be configured */
+ if (!atmel_port->clk) {
atmel_port->clk = clk_get(&pdev->dev, "usart");
clk_enable(atmel_port->clk);
port->uartclk = clk_get_rate(atmel_port->clk);
}
+
+ atmel_port->use_dma_rx = data->use_dma_rx;
+ atmel_port->use_dma_tx = data->use_dma_tx;
+ if (atmel_use_dma_tx(port))
+ port->fifosize = PDC_BUFFER_SIZE;
}
/*
@@ -754,12 +1259,11 @@
atmel_pops.set_wake = fns->set_wake;
}
-
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
static void atmel_console_putchar(struct uart_port *port, int ch)
{
while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
- barrier();
+ cpu_relax();
UART_PUT_CHAR(port, ch);
}
@@ -772,38 +1276,40 @@
unsigned int status, imr;
/*
- * First, save IMR and then disable interrupts
+ * First, save IMR and then disable interrupts
*/
- imr = UART_GET_IMR(port); /* get interrupt mask */
+ imr = UART_GET_IMR(port);
UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
uart_console_write(port, s, count, atmel_console_putchar);
/*
- * Finally, wait for transmitter to become empty
- * and restore IMR
+ * Finally, wait for transmitter to become empty
+ * and restore IMR
*/
do {
status = UART_GET_CSR(port);
} while (!(status & ATMEL_US_TXRDY));
- UART_PUT_IER(port, imr); /* set interrupts back the way they were */
+ /* set interrupts back the way they were */
+ UART_PUT_IER(port, imr);
}
/*
- * If the port was already initialised (eg, by a boot loader), try to determine
- * the current setup.
+ * If the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
*/
-static void __init atmel_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
+static void __init atmel_console_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
{
unsigned int mr, quot;
-// TODO: CR is a write-only register
-// unsigned int cr;
-//
-// cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN);
-// if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) {
-// /* ok, the port was enabled */
-// }
+ /*
+ * If the baud rate generator isn't running, the port wasn't
+ * initialized by the boot loader.
+ */
+ quot = UART_GET_BRGR(port);
+ if (!quot)
+ return;
mr = UART_GET_MR(port) & ATMEL_US_CHRL;
if (mr == ATMEL_US_CHRL_8)
@@ -823,7 +1329,6 @@
* lower than one of those, as it would make us fall through
* to a much lower baud rate than we really want.
*/
- quot = UART_GET_BRGR(port);
*baud = port->uartclk / (16 * (quot - 1));
}
@@ -835,10 +1340,12 @@
int parity = 'n';
int flow = 'n';
- if (port->membase == 0) /* Port not initialized yet - delay setup */
+ if (port->membase == NULL) {
+ /* Port not initialized yet - delay setup */
return -ENODEV;
+ }
- UART_PUT_IDR(port, -1); /* disable interrupts */
+ UART_PUT_IDR(port, -1);
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
@@ -870,13 +1377,16 @@
static int __init atmel_console_init(void)
{
if (atmel_default_console_device) {
- add_preferred_console(ATMEL_DEVICENAME, atmel_default_console_device->id, NULL);
- atmel_init_port(&(atmel_ports[atmel_default_console_device->id]), atmel_default_console_device);
+ add_preferred_console(ATMEL_DEVICENAME,
+ atmel_default_console_device->id, NULL);
+ atmel_init_port(&atmel_ports[atmel_default_console_device->id],
+ atmel_default_console_device);
register_console(&atmel_console);
}
return 0;
}
+
console_initcall(atmel_console_init);
/*
@@ -884,34 +1394,48 @@
*/
static int __init atmel_late_console_init(void)
{
- if (atmel_default_console_device && !(atmel_console.flags & CON_ENABLED))
+ if (atmel_default_console_device
+ && !(atmel_console.flags & CON_ENABLED))
register_console(&atmel_console);
return 0;
}
+
core_initcall(atmel_late_console_init);
+static inline bool atmel_is_console_port(struct uart_port *port)
+{
+ return port->cons && port->cons->index == port->line;
+}
+
#else
#define ATMEL_CONSOLE_DEVICE NULL
+
+static inline bool atmel_is_console_port(struct uart_port *port)
+{
+ return false;
+}
#endif
static struct uart_driver atmel_uart = {
- .owner = THIS_MODULE,
- .driver_name = "atmel_serial",
- .dev_name = ATMEL_DEVICENAME,
- .major = SERIAL_ATMEL_MAJOR,
- .minor = MINOR_START,
- .nr = ATMEL_MAX_UART,
- .cons = ATMEL_CONSOLE_DEVICE,
+ .owner = THIS_MODULE,
+ .driver_name = "atmel_serial",
+ .dev_name = ATMEL_DEVICENAME,
+ .major = SERIAL_ATMEL_MAJOR,
+ .minor = MINOR_START,
+ .nr = ATMEL_MAX_UART,
+ .cons = ATMEL_CONSOLE_DEVICE,
};
#ifdef CONFIG_PM
-static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state)
+static int atmel_serial_suspend(struct platform_device *pdev,
+ pm_message_t state)
{
struct uart_port *port = platform_get_drvdata(pdev);
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
+ if (device_may_wakeup(&pdev->dev)
+ && !at91_suspend_entering_slow_clock())
enable_irq_wake(port->irq);
else {
uart_suspend_port(&atmel_uart, port);
@@ -924,13 +1448,12 @@
static int atmel_serial_resume(struct platform_device *pdev)
{
struct uart_port *port = platform_get_drvdata(pdev);
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_port->suspended) {
uart_resume_port(&atmel_uart, port);
atmel_port->suspended = 0;
- }
- else
+ } else
disable_irq_wake(port->irq);
return 0;
@@ -943,15 +1466,40 @@
static int __devinit atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
+ void *data;
int ret;
+ BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
+
port = &atmel_ports[pdev->id];
atmel_init_port(port, pdev);
+ if (!atmel_use_dma_rx(&port->uart)) {
+ ret = -ENOMEM;
+ data = kmalloc(sizeof(struct atmel_uart_char)
+ * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
+ if (!data)
+ goto err_alloc_ring;
+ port->rx_ring.buf = data;
+ }
+
ret = uart_add_one_port(&atmel_uart, &port->uart);
- if (!ret) {
- device_init_wakeup(&pdev->dev, 1);
- platform_set_drvdata(pdev, port);
+ if (ret)
+ goto err_add_port;
+
+ device_init_wakeup(&pdev->dev, 1);
+ platform_set_drvdata(pdev, port);
+
+ return 0;
+
+err_add_port:
+ kfree(port->rx_ring.buf);
+ port->rx_ring.buf = NULL;
+err_alloc_ring:
+ if (!atmel_is_console_port(&port->uart)) {
+ clk_disable(port->clk);
+ clk_put(port->clk);
+ port->clk = NULL;
}
return ret;
@@ -960,19 +1508,21 @@
static int __devexit atmel_serial_remove(struct platform_device *pdev)
{
struct uart_port *port = platform_get_drvdata(pdev);
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int ret = 0;
- clk_disable(atmel_port->clk);
- clk_put(atmel_port->clk);
-
device_init_wakeup(&pdev->dev, 0);
platform_set_drvdata(pdev, NULL);
- if (port) {
- ret = uart_remove_one_port(&atmel_uart, port);
- kfree(port);
- }
+ ret = uart_remove_one_port(&atmel_uart, port);
+
+ tasklet_kill(&atmel_port->tasklet);
+ kfree(atmel_port->rx_ring.buf);
+
+ /* "port" is allocated statically, so we shouldn't free it */
+
+ clk_disable(atmel_port->clk);
+ clk_put(atmel_port->clk);
return ret;
}
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 276da14..0f5a179 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -58,7 +58,8 @@
#define uart_console(port) (0)
#endif
-static void uart_change_speed(struct uart_state *state, struct ktermios *old_termios);
+static void uart_change_speed(struct uart_state *state,
+ struct ktermios *old_termios);
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
@@ -129,8 +130,8 @@
spin_unlock_irqrestore(&port->lock, flags);
}
-#define uart_set_mctrl(port,set) uart_update_mctrl(port,set,0)
-#define uart_clear_mctrl(port,clear) uart_update_mctrl(port,0,clear)
+#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0)
+#define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear)
/*
* Startup the port. This will be called once per open. All calls
@@ -290,7 +291,7 @@
break;
default:
bits = 10;
- break; // CS8
+ break; /* CS8 */
}
if (cflag & CSTOPB)
@@ -622,7 +623,7 @@
tmp.close_delay = state->close_delay / 10;
tmp.closing_wait = state->closing_wait == USF_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- state->closing_wait / 10;
+ state->closing_wait / 10;
tmp.custom_divisor = port->custom_divisor;
tmp.hub6 = port->hub6;
tmp.io_type = port->iotype;
@@ -788,7 +789,8 @@
* We failed anyway.
*/
retval = -EBUSY;
- goto exit; // Added to return the correct error -Ram Gupta
+ /* Added to return the correct error -Ram Gupta */
+ goto exit;
}
}
@@ -858,7 +860,7 @@
((uart_circ_chars_pending(&state->info->xmit) > 0) &&
!state->info->tty->stopped && !state->info->tty->hw_stopped))
result &= ~TIOCSER_TEMT;
-
+
return put_user(result, value);
}
@@ -996,8 +998,8 @@
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
- ret = 0;
- break;
+ ret = 0;
+ break;
}
schedule();
@@ -1137,7 +1139,8 @@
return ret;
}
-static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+static void uart_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
struct uart_state *state = tty->driver_data;
unsigned long flags;
@@ -1213,7 +1216,7 @@
{
struct uart_state *state = tty->driver_data;
struct uart_port *port;
-
+
BUG_ON(!kernel_locked());
if (!state || !state->port)
@@ -1278,8 +1281,8 @@
uart_shutdown(state);
uart_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
+ tty_ldisc_flush(tty);
+
tty->closing = 0;
state->info->tty = NULL;
@@ -1341,7 +1344,7 @@
expire = jiffies + timeout;
pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n",
- port->line, jiffies, expire);
+ port->line, jiffies, expire);
/*
* Check whether the transmitter is empty every 'char_time'.
@@ -1460,10 +1463,9 @@
* have set TTY_IO_ERROR for a non-existant port.
*/
if ((filp->f_flags & O_NONBLOCK) ||
- (info->tty->termios->c_cflag & CLOCAL) ||
- (info->tty->flags & (1 << TTY_IO_ERROR))) {
+ (info->tty->termios->c_cflag & CLOCAL) ||
+ (info->tty->flags & (1 << TTY_IO_ERROR)))
break;
- }
/*
* Set DTR to allow modem to know we're waiting. Do
@@ -1551,8 +1553,8 @@
}
/*
- * In 2.4.5, calls to uart_open are serialised by the BKL in
- * linux/fs/devices.c:chrdev_open()
+ * calls to uart_open are serialised by the BKL in
+ * fs/char_dev.c:chrdev_open()
* Note that if this fails, then uart_close() _will_ be called.
*
* In time, we want to scrap the "opening nonpresent ports"
@@ -1674,7 +1676,7 @@
port->line, uart_type(port),
mmio ? "mmio:0x" : "port:",
mmio ? (unsigned long long)port->mapbase
- : (unsigned long long) port->iobase,
+ : (unsigned long long) port->iobase,
port->irq);
if (port->type == PORT_UNKNOWN) {
@@ -1682,8 +1684,7 @@
return ret + 1;
}
- if(capable(CAP_SYS_ADMIN))
- {
+ if (capable(CAP_SYS_ADMIN)) {
mutex_lock(&state->mutex);
pm_state = state->pm_state;
if (pm_state)
@@ -1709,12 +1710,12 @@
if (port->icount.overrun)
ret += sprintf(buf + ret, " oe:%d",
port->icount.overrun);
-
-#define INFOBIT(bit,str) \
+
+#define INFOBIT(bit, str) \
if (port->mctrl & (bit)) \
strncat(stat_buf, (str), sizeof(stat_buf) - \
strlen(stat_buf) - 2)
-#define STATBIT(bit,str) \
+#define STATBIT(bit, str) \
if (status & (bit)) \
strncat(stat_buf, (str), sizeof(stat_buf) - \
strlen(stat_buf) - 2)
@@ -1730,7 +1731,7 @@
if (stat_buf[0])
stat_buf[0] = ' ';
strcat(stat_buf, "\n");
-
+
ret += sprintf(buf + ret, stat_buf);
} else {
strcat(buf, "\n");
@@ -1992,11 +1993,11 @@
/*
* Wait for the transmitter to empty.
*/
- for (tries = 3; !ops->tx_empty(port) && tries; tries--) {
+ for (tries = 3; !ops->tx_empty(port) && tries; tries--)
msleep(10);
- }
if (!tries)
- printk(KERN_ERR "%s%s%s%d: Unable to drain transmitter\n",
+ printk(KERN_ERR "%s%s%s%d: Unable to drain "
+ "transmitter\n",
port->dev ? port->dev->bus_id : "",
port->dev ? ": " : "",
drv->dev_name, port->line);
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 33469cf..e018623 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -1418,8 +1418,8 @@
}
static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
-static ssize_t
-show_registers (struct device *_dev, struct device_attribute *attr, char *buf)
+static ssize_t net2280_show_registers(struct device *_dev,
+ struct device_attribute *attr, char *buf)
{
struct net2280 *dev;
char *next;
@@ -1571,7 +1571,7 @@
return PAGE_SIZE - size;
}
-static DEVICE_ATTR (registers, S_IRUGO, show_registers, NULL);
+static DEVICE_ATTR(registers, S_IRUGO, net2280_show_registers, NULL);
static ssize_t
show_queues (struct device *_dev, struct device_attribute *attr, char *buf)
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 2b53d1f..06f87b0 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,7 +6,7 @@
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32 && !MN10300
default y
help
Saying Y here will allow you to use Linux in text mode through a
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 7c3d5f9..b5c3b61 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -61,7 +61,8 @@
config BINFMT_AOUT
tristate "Kernel support for a.out and ECOFF binaries"
- depends on X86_32 || ALPHA || ARM || M68K || SPARC32
+ depends on ARCH_SUPPORTS_AOUT && \
+ (X86_32 || ALPHA || ARM || M68K || SPARC32)
---help---
A.out (Assembler.OUTput) is a set of formats for libraries and
executables used in the earliest versions of UNIX. Linux used
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index b36695a..9e421ee 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -20,6 +20,8 @@
#include <linux/vfs.h>
#include <linux/parser.h>
#include <linux/bitops.h>
+#include <linux/mount.h>
+#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -30,6 +32,9 @@
#include "dir_f.h"
#include "dir_fplus.h"
+#define ADFS_DEFAULT_OWNER_MASK S_IRWXU
+#define ADFS_DEFAULT_OTHER_MASK (S_IRWXG | S_IRWXO)
+
void __adfs_error(struct super_block *sb, const char *function, const char *fmt, ...)
{
char error_buf[128];
@@ -134,6 +139,22 @@
sb->s_fs_info = NULL;
}
+static int adfs_show_options(struct seq_file *seq, struct vfsmount *mnt)
+{
+ struct adfs_sb_info *asb = ADFS_SB(mnt->mnt_sb);
+
+ if (asb->s_uid != 0)
+ seq_printf(seq, ",uid=%u", asb->s_uid);
+ if (asb->s_gid != 0)
+ seq_printf(seq, ",gid=%u", asb->s_gid);
+ if (asb->s_owner_mask != ADFS_DEFAULT_OWNER_MASK)
+ seq_printf(seq, ",ownmask=%o", asb->s_owner_mask);
+ if (asb->s_other_mask != ADFS_DEFAULT_OTHER_MASK)
+ seq_printf(seq, ",othmask=%o", asb->s_other_mask);
+
+ return 0;
+}
+
enum {Opt_uid, Opt_gid, Opt_ownmask, Opt_othmask, Opt_err};
static match_table_t tokens = {
@@ -259,6 +280,7 @@
.put_super = adfs_put_super,
.statfs = adfs_statfs,
.remount_fs = adfs_remount,
+ .show_options = adfs_show_options,
};
static struct adfs_discmap *adfs_read_map(struct super_block *sb, struct adfs_discrecord *dr)
@@ -344,8 +366,8 @@
/* set default options */
asb->s_uid = 0;
asb->s_gid = 0;
- asb->s_owner_mask = S_IRWXU;
- asb->s_other_mask = S_IRWXG | S_IRWXO;
+ asb->s_owner_mask = ADFS_DEFAULT_OWNER_MASK;
+ asb->s_other_mask = ADFS_DEFAULT_OTHER_MASK;
if (parse_options(sb, data))
goto error;
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 3c45d49..d2dc047 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -122,6 +122,7 @@
.write_super = affs_write_super,
.statfs = affs_statfs,
.remount_fs = affs_remount,
+ .show_options = generic_show_options,
};
enum {
@@ -272,6 +273,8 @@
u8 sig[4];
int ret = -EINVAL;
+ save_mount_options(sb, data);
+
pr_debug("AFFS: read_super(%s)\n",data ? (const char *)data : "no options");
sb->s_magic = AFFS_SUPER_MAGIC;
@@ -487,14 +490,21 @@
int root_block;
unsigned long mount_flags;
int res = 0;
+ char *new_opts = kstrdup(data, GFP_KERNEL);
pr_debug("AFFS: remount(flags=0x%x,opts=\"%s\")\n",*flags,data);
*flags |= MS_NODIRATIME;
- if (!parse_options(data,&uid,&gid,&mode,&reserved,&root_block,
- &blocksize,&sbi->s_prefix,sbi->s_volume,&mount_flags))
+ if (!parse_options(data, &uid, &gid, &mode, &reserved, &root_block,
+ &blocksize, &sbi->s_prefix, sbi->s_volume,
+ &mount_flags)) {
+ kfree(new_opts);
return -EINVAL;
+ }
+ kfree(sb->s_options);
+ sb->s_options = new_opts;
+
sbi->s_flags = mount_flags;
sbi->s_mode = mode;
sbi->s_uid = uid;
diff --git a/fs/afs/security.c b/fs/afs/security.c
index 9446a1f..3bcbece 100644
--- a/fs/afs/security.c
+++ b/fs/afs/security.c
@@ -287,7 +287,7 @@
int afs_permission(struct inode *inode, int mask, struct nameidata *nd)
{
struct afs_vnode *vnode = AFS_FS_I(inode);
- afs_access_t access;
+ afs_access_t uninitialized_var(access);
struct key *key;
int ret;
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 4b2558c..36bbce4 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -52,6 +52,7 @@
.clear_inode = afs_clear_inode,
.umount_begin = afs_umount_begin,
.put_super = afs_put_super,
+ .show_options = generic_show_options,
};
static struct kmem_cache *afs_inode_cachep;
@@ -357,6 +358,7 @@
struct super_block *sb;
struct afs_volume *vol;
struct key *key;
+ char *new_opts = kstrdup(options, GFP_KERNEL);
int ret;
_enter(",,%s,%p", dev_name, options);
@@ -408,9 +410,11 @@
deactivate_super(sb);
goto error;
}
+ sb->s_options = new_opts;
sb->s_flags |= MS_ACTIVE;
} else {
_debug("reuse");
+ kfree(new_opts);
ASSERTCMP(sb->s_flags, &, MS_ACTIVE);
}
@@ -424,6 +428,7 @@
afs_put_volume(params.volume);
afs_put_cell(params.cell);
key_put(params.key);
+ kfree(new_opts);
_leave(" = %d", ret);
return ret;
}
diff --git a/fs/aio.c b/fs/aio.c
index 8a37dbb..b74c567 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -317,7 +317,7 @@
/* wait_on_sync_kiocb:
* Waits on the given sync kiocb to complete.
*/
-ssize_t fastcall wait_on_sync_kiocb(struct kiocb *iocb)
+ssize_t wait_on_sync_kiocb(struct kiocb *iocb)
{
while (iocb->ki_users) {
set_current_state(TASK_UNINTERRUPTIBLE);
@@ -336,7 +336,7 @@
* go away, they will call put_ioctx and release any pinned memory
* associated with the request (held via struct page * references).
*/
-void fastcall exit_aio(struct mm_struct *mm)
+void exit_aio(struct mm_struct *mm)
{
struct kioctx *ctx = mm->ioctx_list;
mm->ioctx_list = NULL;
@@ -365,7 +365,7 @@
* Called when the last user of an aio context has gone away,
* and the struct needs to be freed.
*/
-void fastcall __put_ioctx(struct kioctx *ctx)
+void __put_ioctx(struct kioctx *ctx)
{
unsigned nr_events = ctx->max_reqs;
@@ -397,8 +397,7 @@
* This prevents races between the aio code path referencing the
* req (after submitting it) and aio_complete() freeing the req.
*/
-static struct kiocb *__aio_get_req(struct kioctx *ctx);
-static struct kiocb fastcall *__aio_get_req(struct kioctx *ctx)
+static struct kiocb *__aio_get_req(struct kioctx *ctx)
{
struct kiocb *req = NULL;
struct aio_ring *ring;
@@ -533,7 +532,7 @@
* Returns true if this put was the last user of the kiocb,
* false if the request is still in use.
*/
-int fastcall aio_put_req(struct kiocb *req)
+int aio_put_req(struct kiocb *req)
{
struct kioctx *ctx = req->ki_ctx;
int ret;
@@ -893,7 +892,7 @@
* The retry is usually executed by aio workqueue
* threads (See aio_kick_handler).
*/
-void fastcall kick_iocb(struct kiocb *iocb)
+void kick_iocb(struct kiocb *iocb)
{
/* sync iocbs are easy: they can only ever be executing from a
* single context. */
@@ -912,7 +911,7 @@
* Returns true if this is the last user of the request. The
* only other user of the request can be the cancellation code.
*/
-int fastcall aio_complete(struct kiocb *iocb, long res, long res2)
+int aio_complete(struct kiocb *iocb, long res, long res2)
{
struct kioctx *ctx = iocb->ki_ctx;
struct aio_ring_info *info;
@@ -1330,6 +1329,10 @@
opcode = IOCB_CMD_PWRITEV;
}
+ /* This matches the pread()/pwrite() logic */
+ if (iocb->ki_pos < 0)
+ return -EINVAL;
+
do {
ret = rw_op(iocb, &iocb->ki_iovec[iocb->ki_cur_seg],
iocb->ki_nr_segs - iocb->ki_cur_seg,
@@ -1348,6 +1351,13 @@
if ((ret == 0) || (iocb->ki_left == 0))
ret = iocb->ki_nbytes - iocb->ki_left;
+ /* If we managed to write some out we return that, rather than
+ * the eventual error. */
+ if (opcode == IOCB_CMD_PWRITEV
+ && ret < 0 && ret != -EIOCBQUEUED && ret != -EIOCBRETRY
+ && iocb->ki_nbytes - iocb->ki_left)
+ ret = iocb->ki_nbytes - iocb->ki_left;
+
return ret;
}
@@ -1523,7 +1533,7 @@
return 1;
}
-int fastcall io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
+int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
struct iocb *iocb)
{
struct kiocb *req;
diff --git a/fs/autofs/inode.c b/fs/autofs/inode.c
index 708bdb8..dda510d 100644
--- a/fs/autofs/inode.c
+++ b/fs/autofs/inode.c
@@ -54,6 +54,7 @@
static const struct super_operations autofs_sops = {
.statfs = simple_statfs,
+ .show_options = generic_show_options,
};
enum {Opt_err, Opt_fd, Opt_uid, Opt_gid, Opt_pgrp, Opt_minproto, Opt_maxproto};
@@ -140,6 +141,8 @@
int minproto, maxproto;
pid_t pgid;
+ save_mount_options(s, data);
+
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
goto fail_unlock;
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index 7f05d6c..2fdcf5e 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -176,11 +176,16 @@
static int autofs4_show_options(struct seq_file *m, struct vfsmount *mnt)
{
struct autofs_sb_info *sbi = autofs4_sbi(mnt->mnt_sb);
+ struct inode *root_inode = mnt->mnt_sb->s_root->d_inode;
if (!sbi)
return 0;
seq_printf(m, ",fd=%d", sbi->pipefd);
+ if (root_inode->i_uid != 0)
+ seq_printf(m, ",uid=%u", root_inode->i_uid);
+ if (root_inode->i_gid != 0)
+ seq_printf(m, ",gid=%u", root_inode->i_gid);
seq_printf(m, ",pgrp=%d", sbi->oz_pgrp);
seq_printf(m, ",timeout=%lu", sbi->exp_timeout/HZ);
seq_printf(m, ",minproto=%d", sbi->min_proto);
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 403fe66..82123ff 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -57,6 +57,7 @@
.put_super = befs_put_super, /* uninit super */
.statfs = befs_statfs, /* statfs */
.remount_fs = befs_remount,
+ .show_options = generic_show_options,
};
/* slab cache for befs_inode_info objects */
@@ -759,10 +760,11 @@
befs_super_block *disk_sb;
struct inode *root;
long ret = -EINVAL;
-
const unsigned long sb_block = 0;
const off_t x86_sb_off = 512;
+ save_mount_options(sb, data);
+
sb->s_fs_info = kmalloc(sizeof (*befs_sb), GFP_KERNEL);
if (sb->s_fs_info == NULL) {
printk(KERN_ERR
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index 7f65e71..a1bb224 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -28,6 +28,7 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/cacheflush.h>
+#include <asm/a.out-core.h>
static int load_aout_binary(struct linux_binprm *, struct pt_regs * regs);
static int load_aout_library(struct file*);
@@ -118,7 +119,7 @@
dump.u_ar0 = offsetof(struct user, regs);
#endif
dump.signal = signr;
- dump_thread(regs, &dump);
+ aout_dump_thread(regs, &dump);
/* If the size of the dump file exceeds the rlimit, then see what would happen
if we wrote the stack, but not the data area. */
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 111771d..41a958a 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -134,8 +134,7 @@
static int
create_elf_tables(struct linux_binprm *bprm, struct elfhdr *exec,
- int interp_aout, unsigned long load_addr,
- unsigned long interp_load_addr)
+ unsigned long load_addr, unsigned long interp_load_addr)
{
unsigned long p = bprm->p;
int argc = bprm->argc;
@@ -223,12 +222,7 @@
sp = STACK_ADD(p, ei_index);
- items = (argc + 1) + (envc + 1);
- if (interp_aout) {
- items += 3; /* a.out interpreters require argv & envp too */
- } else {
- items += 1; /* ELF interpreters only put argc on the stack */
- }
+ items = (argc + 1) + (envc + 1) + 1;
bprm->p = STACK_ROUND(sp, items);
/* Point sp at the lowest address on the stack */
@@ -251,16 +245,8 @@
/* Now, let's put argc (and argv, envp if appropriate) on the stack */
if (__put_user(argc, sp++))
return -EFAULT;
- if (interp_aout) {
- argv = sp + 2;
- envp = argv + argc + 1;
- if (__put_user((elf_addr_t)(unsigned long)argv, sp++) ||
- __put_user((elf_addr_t)(unsigned long)envp, sp++))
- return -EFAULT;
- } else {
- argv = sp;
- envp = argv + argc + 1;
- }
+ argv = sp;
+ envp = argv + argc + 1;
/* Populate argv and envp */
p = current->mm->arg_end = current->mm->arg_start;
@@ -513,59 +499,12 @@
return error;
}
-static unsigned long load_aout_interp(struct exec *interp_ex,
- struct file *interpreter)
-{
- unsigned long text_data, elf_entry = ~0UL;
- char __user * addr;
- loff_t offset;
-
- current->mm->end_code = interp_ex->a_text;
- text_data = interp_ex->a_text + interp_ex->a_data;
- current->mm->end_data = text_data;
- current->mm->brk = interp_ex->a_bss + text_data;
-
- switch (N_MAGIC(*interp_ex)) {
- case OMAGIC:
- offset = 32;
- addr = (char __user *)0;
- break;
- case ZMAGIC:
- case QMAGIC:
- offset = N_TXTOFF(*interp_ex);
- addr = (char __user *)N_TXTADDR(*interp_ex);
- break;
- default:
- goto out;
- }
-
- down_write(¤t->mm->mmap_sem);
- do_brk(0, text_data);
- up_write(¤t->mm->mmap_sem);
- if (!interpreter->f_op || !interpreter->f_op->read)
- goto out;
- if (interpreter->f_op->read(interpreter, addr, text_data, &offset) < 0)
- goto out;
- flush_icache_range((unsigned long)addr,
- (unsigned long)addr + text_data);
-
- down_write(¤t->mm->mmap_sem);
- do_brk(ELF_PAGESTART(text_data + ELF_MIN_ALIGN - 1),
- interp_ex->a_bss);
- up_write(¤t->mm->mmap_sem);
- elf_entry = interp_ex->a_entry;
-
-out:
- return elf_entry;
-}
-
/*
* These are the functions used to load ELF style executables and shared
* libraries. There is no binary dependent code anywhere else.
*/
#define INTERPRETER_NONE 0
-#define INTERPRETER_AOUT 1
#define INTERPRETER_ELF 2
#ifndef STACK_RND_MASK
@@ -594,7 +533,6 @@
unsigned long load_addr = 0, load_bias = 0;
int load_addr_set = 0;
char * elf_interpreter = NULL;
- unsigned int interpreter_type = INTERPRETER_NONE;
unsigned long error;
struct elf_phdr *elf_ppnt, *elf_phdata;
unsigned long elf_bss, elf_brk;
@@ -605,7 +543,6 @@
unsigned long interp_load_addr = 0;
unsigned long start_code, end_code, start_data, end_data;
unsigned long reloc_func_desc = 0;
- char passed_fileno[6];
struct files_struct *files;
int executable_stack = EXSTACK_DEFAULT;
unsigned long def_flags = 0;
@@ -774,59 +711,18 @@
/* Some simple consistency checks for the interpreter */
if (elf_interpreter) {
- static int warn;
- interpreter_type = INTERPRETER_ELF | INTERPRETER_AOUT;
-
- /* Now figure out which format our binary is */
- if ((N_MAGIC(loc->interp_ex) != OMAGIC) &&
- (N_MAGIC(loc->interp_ex) != ZMAGIC) &&
- (N_MAGIC(loc->interp_ex) != QMAGIC))
- interpreter_type = INTERPRETER_ELF;
-
- if (memcmp(loc->interp_elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
- interpreter_type &= ~INTERPRETER_ELF;
-
- if (interpreter_type == INTERPRETER_AOUT && warn < 10) {
- printk(KERN_WARNING "a.out ELF interpreter %s is "
- "deprecated and will not be supported "
- "after Linux 2.6.25\n", elf_interpreter);
- warn++;
- }
-
retval = -ELIBBAD;
- if (!interpreter_type)
+ /* Not an ELF interpreter */
+ if (memcmp(loc->interp_elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
goto out_free_dentry;
-
- /* Make sure only one type was selected */
- if ((interpreter_type & INTERPRETER_ELF) &&
- interpreter_type != INTERPRETER_ELF) {
- // FIXME - ratelimit this before re-enabling
- // printk(KERN_WARNING "ELF: Ambiguous type, using ELF\n");
- interpreter_type = INTERPRETER_ELF;
- }
/* Verify the interpreter has a valid arch */
- if ((interpreter_type == INTERPRETER_ELF) &&
- !elf_check_arch(&loc->interp_elf_ex))
+ if (!elf_check_arch(&loc->interp_elf_ex))
goto out_free_dentry;
} else {
/* Executables without an interpreter also need a personality */
SET_PERSONALITY(loc->elf_ex, 0);
}
- /* OK, we are done with that, now set up the arg stuff,
- and then start this sucker up */
- if ((!bprm->sh_bang) && (interpreter_type == INTERPRETER_AOUT)) {
- char *passed_p = passed_fileno;
- sprintf(passed_fileno, "%d", elf_exec_fileno);
-
- if (elf_interpreter) {
- retval = copy_strings_kernel(1, &passed_p, bprm);
- if (retval)
- goto out_free_dentry;
- bprm->argc++;
- }
- }
-
/* Flush all traces of the currently running executable */
retval = flush_old_exec(bprm);
if (retval)
@@ -1004,24 +900,19 @@
}
if (elf_interpreter) {
- if (interpreter_type == INTERPRETER_AOUT) {
- elf_entry = load_aout_interp(&loc->interp_ex,
- interpreter);
- } else {
- unsigned long uninitialized_var(interp_map_addr);
+ unsigned long uninitialized_var(interp_map_addr);
- elf_entry = load_elf_interp(&loc->interp_elf_ex,
- interpreter,
- &interp_map_addr,
- load_bias);
- if (!IS_ERR((void *)elf_entry)) {
- /*
- * load_elf_interp() returns relocation
- * adjustment
- */
- interp_load_addr = elf_entry;
- elf_entry += loc->interp_elf_ex.e_entry;
- }
+ elf_entry = load_elf_interp(&loc->interp_elf_ex,
+ interpreter,
+ &interp_map_addr,
+ load_bias);
+ if (!IS_ERR((void *)elf_entry)) {
+ /*
+ * load_elf_interp() returns relocation
+ * adjustment
+ */
+ interp_load_addr = elf_entry;
+ elf_entry += loc->interp_elf_ex.e_entry;
}
if (BAD_ADDR(elf_entry)) {
force_sig(SIGSEGV, current);
@@ -1045,8 +936,7 @@
kfree(elf_phdata);
- if (interpreter_type != INTERPRETER_AOUT)
- sys_close(elf_exec_fileno);
+ sys_close(elf_exec_fileno);
set_binfmt(&elf_format);
@@ -1061,15 +951,12 @@
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
retval = create_elf_tables(bprm, &loc->elf_ex,
- (interpreter_type == INTERPRETER_AOUT),
load_addr, interp_load_addr);
if (retval < 0) {
send_sig(SIGKILL, current, 0);
goto out;
}
/* N.B. passed_fileno might not be initialized? */
- if (interpreter_type == INTERPRETER_AOUT)
- current->mm->arg_start += strlen(passed_fileno) + 1;
current->mm->end_code = end_code;
current->mm->start_code = start_code;
current->mm->start_data = start_data;
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 33764fd..d8a02f1 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -20,7 +20,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/mman.h>
-#include <linux/a.out.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/string.h>
diff --git a/fs/binfmt_som.c b/fs/binfmt_som.c
index 9208c41..14c6352 100644
--- a/fs/binfmt_som.c
+++ b/fs/binfmt_som.c
@@ -29,7 +29,6 @@
#include <linux/personality.h>
#include <linux/init.h>
-#include <asm/a.out.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
diff --git a/fs/buffer.c b/fs/buffer.c
index 826baf4..3ebccf4 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -67,14 +67,14 @@
return 0;
}
-void fastcall __lock_buffer(struct buffer_head *bh)
+void __lock_buffer(struct buffer_head *bh)
{
wait_on_bit_lock(&bh->b_state, BH_Lock, sync_buffer,
TASK_UNINTERRUPTIBLE);
}
EXPORT_SYMBOL(__lock_buffer);
-void fastcall unlock_buffer(struct buffer_head *bh)
+void unlock_buffer(struct buffer_head *bh)
{
smp_mb__before_clear_bit();
clear_buffer_locked(bh);
@@ -678,7 +678,7 @@
} else {
BUG_ON(mapping->assoc_mapping != buffer_mapping);
}
- if (list_empty(&bh->b_assoc_buffers)) {
+ if (!bh->b_assoc_map) {
spin_lock(&buffer_mapping->private_lock);
list_move_tail(&bh->b_assoc_buffers,
&mapping->private_list);
@@ -794,6 +794,7 @@
{
struct buffer_head *bh;
struct list_head tmp;
+ struct address_space *mapping;
int err = 0, err2;
INIT_LIST_HEAD(&tmp);
@@ -801,9 +802,14 @@
spin_lock(lock);
while (!list_empty(list)) {
bh = BH_ENTRY(list->next);
+ mapping = bh->b_assoc_map;
__remove_assoc_queue(bh);
+ /* Avoid race with mark_buffer_dirty_inode() which does
+ * a lockless check and we rely on seeing the dirty bit */
+ smp_mb();
if (buffer_dirty(bh) || buffer_locked(bh)) {
list_add(&bh->b_assoc_buffers, &tmp);
+ bh->b_assoc_map = mapping;
if (buffer_dirty(bh)) {
get_bh(bh);
spin_unlock(lock);
@@ -822,8 +828,17 @@
while (!list_empty(&tmp)) {
bh = BH_ENTRY(tmp.prev);
- list_del_init(&bh->b_assoc_buffers);
get_bh(bh);
+ mapping = bh->b_assoc_map;
+ __remove_assoc_queue(bh);
+ /* Avoid race with mark_buffer_dirty_inode() which does
+ * a lockless check and we rely on seeing the dirty bit */
+ smp_mb();
+ if (buffer_dirty(bh)) {
+ list_add(&bh->b_assoc_buffers,
+ &bh->b_assoc_map->private_list);
+ bh->b_assoc_map = mapping;
+ }
spin_unlock(lock);
wait_on_buffer(bh);
if (!buffer_uptodate(bh))
@@ -1164,7 +1179,7 @@
* mark_buffer_dirty() is atomic. It takes bh->b_page->mapping->private_lock,
* mapping->tree_lock and the global inode_lock.
*/
-void fastcall mark_buffer_dirty(struct buffer_head *bh)
+void mark_buffer_dirty(struct buffer_head *bh)
{
WARN_ON_ONCE(!buffer_uptodate(bh));
if (!buffer_dirty(bh) && !test_set_buffer_dirty(bh))
@@ -1195,7 +1210,7 @@
void __bforget(struct buffer_head *bh)
{
clear_buffer_dirty(bh);
- if (!list_empty(&bh->b_assoc_buffers)) {
+ if (bh->b_assoc_map) {
struct address_space *buffer_mapping = bh->b_page->mapping;
spin_lock(&buffer_mapping->private_lock);
@@ -1436,6 +1451,7 @@
{
on_each_cpu(invalidate_bh_lru, NULL, 1, 1);
}
+EXPORT_SYMBOL_GPL(invalidate_bh_lrus);
void set_bh_page(struct buffer_head *bh,
struct page *page, unsigned long offset)
@@ -3021,7 +3037,7 @@
do {
struct buffer_head *next = bh->b_this_page;
- if (!list_empty(&bh->b_assoc_buffers))
+ if (bh->b_assoc_map)
__remove_assoc_queue(bh);
bh = next;
} while (bh != head);
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 2c7a8b5..038674a 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -357,7 +357,7 @@
/*
* Called every time a character special file is opened
*/
-int chrdev_open(struct inode * inode, struct file * filp)
+static int chrdev_open(struct inode *inode, struct file *filp)
{
struct cdev *p;
struct cdev *new = NULL;
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index fa6b7f7..fddffe4 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -56,13 +56,15 @@
.follow_link = debugfs_follow_link,
};
-static void debugfs_u8_set(void *data, u64 val)
+static int debugfs_u8_set(void *data, u64 val)
{
*(u8 *)data = val;
+ return 0;
}
-static u64 debugfs_u8_get(void *data)
+static int debugfs_u8_get(void *data, u64 *val)
{
- return *(u8 *)data;
+ *val = *(u8 *)data;
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u8, debugfs_u8_get, debugfs_u8_set, "%llu\n");
@@ -97,13 +99,15 @@
}
EXPORT_SYMBOL_GPL(debugfs_create_u8);
-static void debugfs_u16_set(void *data, u64 val)
+static int debugfs_u16_set(void *data, u64 val)
{
*(u16 *)data = val;
+ return 0;
}
-static u64 debugfs_u16_get(void *data)
+static int debugfs_u16_get(void *data, u64 *val)
{
- return *(u16 *)data;
+ *val = *(u16 *)data;
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u16, debugfs_u16_get, debugfs_u16_set, "%llu\n");
@@ -138,13 +142,15 @@
}
EXPORT_SYMBOL_GPL(debugfs_create_u16);
-static void debugfs_u32_set(void *data, u64 val)
+static int debugfs_u32_set(void *data, u64 val)
{
*(u32 *)data = val;
+ return 0;
}
-static u64 debugfs_u32_get(void *data)
+static int debugfs_u32_get(void *data, u64 *val)
{
- return *(u32 *)data;
+ *val = *(u32 *)data;
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u32, debugfs_u32_get, debugfs_u32_set, "%llu\n");
@@ -179,14 +185,16 @@
}
EXPORT_SYMBOL_GPL(debugfs_create_u32);
-static void debugfs_u64_set(void *data, u64 val)
+static int debugfs_u64_set(void *data, u64 val)
{
*(u64 *)data = val;
+ return 0;
}
-static u64 debugfs_u64_get(void *data)
+static int debugfs_u64_get(void *data, u64 *val)
{
- return *(u64 *)data;
+ *val = *(u64 *)data;
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_u64, debugfs_u64_get, debugfs_u64_set, "%llu\n");
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 06ef9a2..f120e12 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -20,9 +20,12 @@
#include <linux/devpts_fs.h>
#include <linux/parser.h>
#include <linux/fsnotify.h>
+#include <linux/seq_file.h>
#define DEVPTS_SUPER_MAGIC 0x1cd1
+#define DEVPTS_DEFAULT_MODE 0600
+
static struct vfsmount *devpts_mnt;
static struct dentry *devpts_root;
@@ -32,7 +35,7 @@
uid_t uid;
gid_t gid;
umode_t mode;
-} config = {.mode = 0600};
+} config = {.mode = DEVPTS_DEFAULT_MODE};
enum {
Opt_uid, Opt_gid, Opt_mode,
@@ -54,7 +57,7 @@
config.setgid = 0;
config.uid = 0;
config.gid = 0;
- config.mode = 0600;
+ config.mode = DEVPTS_DEFAULT_MODE;
while ((p = strsep(&data, ",")) != NULL) {
substring_t args[MAX_OPT_ARGS];
@@ -81,7 +84,7 @@
case Opt_mode:
if (match_octal(&args[0], &option))
return -EINVAL;
- config.mode = option & ~S_IFMT;
+ config.mode = option & S_IALLUGO;
break;
default:
printk(KERN_ERR "devpts: called with bogus options\n");
@@ -92,9 +95,21 @@
return 0;
}
+static int devpts_show_options(struct seq_file *seq, struct vfsmount *vfs)
+{
+ if (config.setuid)
+ seq_printf(seq, ",uid=%u", config.uid);
+ if (config.setgid)
+ seq_printf(seq, ",gid=%u", config.gid);
+ seq_printf(seq, ",mode=%03o", config.mode);
+
+ return 0;
+}
+
static const struct super_operations devpts_sops = {
.statfs = simple_statfs,
.remount_fs = devpts_remount,
+ .show_options = devpts_show_options,
};
static int
diff --git a/fs/exec.c b/fs/exec.c
index be923e4..9ff6069 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -119,7 +119,7 @@
if (error)
goto exit;
- file = nameidata_to_filp(&nd, O_RDONLY);
+ file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
error = PTR_ERR(file);
if (IS_ERR(file))
goto out;
@@ -658,7 +658,8 @@
int err = vfs_permission(&nd, MAY_EXEC);
file = ERR_PTR(err);
if (!err) {
- file = nameidata_to_filp(&nd, O_RDONLY);
+ file = nameidata_to_filp(&nd,
+ O_RDONLY|O_LARGEFILE);
if (!IS_ERR(file)) {
err = deny_write_access(file);
if (err) {
@@ -782,26 +783,8 @@
zap_other_threads(tsk);
read_unlock(&tasklist_lock);
- /*
- * Account for the thread group leader hanging around:
- */
- count = 1;
- if (!thread_group_leader(tsk)) {
- count = 2;
- /*
- * The SIGALRM timer survives the exec, but needs to point
- * at us as the new group leader now. We have a race with
- * a timer firing now getting the old leader, so we need to
- * synchronize with any firing (by calling del_timer_sync)
- * before we can safely let the old group leader die.
- */
- sig->tsk = tsk;
- spin_unlock_irq(lock);
- if (hrtimer_cancel(&sig->real_timer))
- hrtimer_restart(&sig->real_timer);
- spin_lock_irq(lock);
- }
-
+ /* Account for the thread group leader hanging around: */
+ count = thread_group_leader(tsk) ? 1 : 2;
sig->notify_count = count;
while (atomic_read(&sig->count) > count) {
__set_current_state(TASK_UNINTERRUPTIBLE);
@@ -1184,7 +1167,7 @@
{
int try,retval;
struct linux_binfmt *fmt;
-#ifdef __alpha__
+#if defined(__alpha__) && defined(CONFIG_ARCH_SUPPORTS_AOUT)
/* handle /sbin/loader.. */
{
struct exec * eh = (struct exec *) bprm->buf;
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index f1e5705..47d88da 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -126,7 +126,6 @@
/* inode.c */
extern struct inode *ext2_iget (struct super_block *, unsigned long);
extern int ext2_write_inode (struct inode *, int);
-extern void ext2_put_inode (struct inode *);
extern void ext2_delete_inode (struct inode *);
extern int ext2_sync_inode (struct inode *);
extern int ext2_get_block(struct inode *, sector_t, struct buffer_head *, int);
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 22f1010..088b011 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -285,6 +285,9 @@
seq_puts(seq, ",xip");
#endif
+ if (!test_opt(sb, RESERVATION))
+ seq_puts(seq, ",noreservation");
+
return 0;
}
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index a757130..da0cb2c 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -630,9 +630,7 @@
jbd_unlock_bh_state(bitmap_bh);
spin_lock(sb_bgl_lock(sbi, block_group));
- desc->bg_free_blocks_count =
- cpu_to_le16(le16_to_cpu(desc->bg_free_blocks_count) +
- group_freed);
+ le16_add_cpu(&desc->bg_free_blocks_count, group_freed);
spin_unlock(sb_bgl_lock(sbi, block_group));
percpu_counter_add(&sbi->s_freeblocks_counter, count);
@@ -1696,8 +1694,7 @@
ret_block, goal_hits, goal_attempts);
spin_lock(sb_bgl_lock(sbi, group_no));
- gdp->bg_free_blocks_count =
- cpu_to_le16(le16_to_cpu(gdp->bg_free_blocks_count)-num);
+ le16_add_cpu(&gdp->bg_free_blocks_count, -num);
spin_unlock(sb_bgl_lock(sbi, group_no));
percpu_counter_sub(&sbi->s_freeblocks_counter, num);
diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index 58ae2f9..4f4020c 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -164,11 +164,9 @@
if (gdp) {
spin_lock(sb_bgl_lock(sbi, block_group));
- gdp->bg_free_inodes_count = cpu_to_le16(
- le16_to_cpu(gdp->bg_free_inodes_count) + 1);
+ le16_add_cpu(&gdp->bg_free_inodes_count, 1);
if (is_directory)
- gdp->bg_used_dirs_count = cpu_to_le16(
- le16_to_cpu(gdp->bg_used_dirs_count) - 1);
+ le16_add_cpu(&gdp->bg_used_dirs_count, -1);
spin_unlock(sb_bgl_lock(sbi, block_group));
percpu_counter_inc(&sbi->s_freeinodes_counter);
if (is_directory)
@@ -527,11 +525,9 @@
err = ext3_journal_get_write_access(handle, bh2);
if (err) goto fail;
spin_lock(sb_bgl_lock(sbi, group));
- gdp->bg_free_inodes_count =
- cpu_to_le16(le16_to_cpu(gdp->bg_free_inodes_count) - 1);
+ le16_add_cpu(&gdp->bg_free_inodes_count, -1);
if (S_ISDIR(mode)) {
- gdp->bg_used_dirs_count =
- cpu_to_le16(le16_to_cpu(gdp->bg_used_dirs_count) + 1);
+ le16_add_cpu(&gdp->bg_used_dirs_count, 1);
}
spin_unlock(sb_bgl_lock(sbi, group));
BUFFER_TRACE(bh2, "call ext3_journal_dirty_metadata");
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index ebc05af..9397d77 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -518,8 +518,7 @@
EXT3_SB(sb)->s_gdb_count++;
kfree(o_group_desc);
- es->s_reserved_gdt_blocks =
- cpu_to_le16(le16_to_cpu(es->s_reserved_gdt_blocks) - 1);
+ le16_add_cpu(&es->s_reserved_gdt_blocks, -1);
ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh);
return 0;
@@ -890,10 +889,8 @@
* blocks/inodes before the group is live won't actually let us
* allocate the new space yet.
*/
- es->s_blocks_count = cpu_to_le32(le32_to_cpu(es->s_blocks_count) +
- input->blocks_count);
- es->s_inodes_count = cpu_to_le32(le32_to_cpu(es->s_inodes_count) +
- EXT3_INODES_PER_GROUP(sb));
+ le32_add_cpu(&es->s_blocks_count, input->blocks_count);
+ le32_add_cpu(&es->s_inodes_count, EXT3_INODES_PER_GROUP(sb));
/*
* We need to protect s_groups_count against other CPUs seeing
@@ -926,8 +923,7 @@
/* Update the reserved block counts only once the new group is
* active. */
- es->s_r_blocks_count = cpu_to_le32(le32_to_cpu(es->s_r_blocks_count) +
- input->reserved_blocks);
+ le32_add_cpu(&es->s_r_blocks_count, input->reserved_blocks);
/* Update the free space counts */
percpu_counter_add(&sbi->s_freeblocks_counter,
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index cf2a2c3..8e02cbf 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -1222,7 +1222,7 @@
#endif
if (!(__s16) le16_to_cpu(es->s_max_mnt_count))
es->s_max_mnt_count = cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT);
- es->s_mnt_count=cpu_to_le16(le16_to_cpu(es->s_mnt_count) + 1);
+ le16_add_cpu(&es->s_mnt_count, 1);
es->s_mtime = cpu_to_le32(get_seconds());
ext3_update_dynamic_rev(sb);
EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER);
diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c
index 4083738..fb89c29 100644
--- a/fs/ext3/xattr.c
+++ b/fs/ext3/xattr.c
@@ -492,8 +492,7 @@
get_bh(bh);
ext3_forget(handle, 1, inode, bh, bh->b_blocknr);
} else {
- BHDR(bh)->h_refcount = cpu_to_le32(
- le32_to_cpu(BHDR(bh)->h_refcount) - 1);
+ le32_add_cpu(&BHDR(bh)->h_refcount, -1);
error = ext3_journal_dirty_metadata(handle, bh);
if (IS_SYNC(inode))
handle->h_sync = 1;
@@ -780,8 +779,7 @@
if (error)
goto cleanup_dquot;
lock_buffer(new_bh);
- BHDR(new_bh)->h_refcount = cpu_to_le32(1 +
- le32_to_cpu(BHDR(new_bh)->h_refcount));
+ le32_add_cpu(&BHDR(new_bh)->h_refcount, 1);
ea_bdebug(new_bh, "reusing; refcount now=%d",
le32_to_cpu(BHDR(new_bh)->h_refcount));
unlock_buffer(new_bh);
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 085269e..53f3cf6 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -837,6 +837,8 @@
if (!opts->numtail)
seq_puts(m, ",nonumtail");
}
+ if (sbi->options.flush)
+ seq_puts(m, ",flush");
return 0;
}
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 8685263..e632da7 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -24,7 +24,7 @@
#include <asm/siginfo.h>
#include <asm/uaccess.h>
-void fastcall set_close_on_exec(unsigned int fd, int flag)
+void set_close_on_exec(unsigned int fd, int flag)
{
struct files_struct *files = current->files;
struct fdtable *fdt;
@@ -309,7 +309,7 @@
{
pid_t pid;
read_lock(&filp->f_owner.lock);
- pid = pid_nr_ns(filp->f_owner.pid, current->nsproxy->pid_ns);
+ pid = pid_vnr(filp->f_owner.pid);
if (filp->f_owner.pid_type == PIDTYPE_PGID)
pid = -pid;
read_unlock(&filp->f_owner.lock);
diff --git a/fs/file_table.c b/fs/file_table.c
index 664e3f2..6d27bef 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -197,7 +197,7 @@
}
EXPORT_SYMBOL(init_file);
-void fastcall fput(struct file *file)
+void fput(struct file *file)
{
if (atomic_dec_and_test(&file->f_count))
__fput(file);
@@ -208,7 +208,7 @@
/* __fput is called from task context when aio completion releases the last
* last use of a struct file *. Do not use otherwise.
*/
-void fastcall __fput(struct file *file)
+void __fput(struct file *file)
{
struct dentry *dentry = file->f_path.dentry;
struct vfsmount *mnt = file->f_path.mnt;
@@ -241,7 +241,7 @@
mntput(mnt);
}
-struct file fastcall *fget(unsigned int fd)
+struct file *fget(unsigned int fd)
{
struct file *file;
struct files_struct *files = current->files;
@@ -269,7 +269,7 @@
* and a flag is returned to be passed to the corresponding fput_light().
* There must not be a cloning between an fget_light/fput_light pair.
*/
-struct file fastcall *fget_light(unsigned int fd, int *fput_needed)
+struct file *fget_light(unsigned int fd, int *fput_needed)
{
struct file *file;
struct files_struct *files = current->files;
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index db80ce9..c007607 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -655,7 +655,7 @@
int ret;
struct writeback_control wbc = {
.nr_to_write = LONG_MAX,
- .sync_mode = WB_SYNC_ALL,
+ .sync_mode = sync ? WB_SYNC_ALL : WB_SYNC_NONE,
.range_start = 0,
.range_end = LLONG_MAX,
};
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 5747074..033f7bd 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -29,6 +29,8 @@
#define FUSE_SUPER_MAGIC 0x65735546
+#define FUSE_DEFAULT_BLKSIZE 512
+
struct fuse_mount_data {
int fd;
unsigned rootmode;
@@ -355,7 +357,7 @@
char *p;
memset(d, 0, sizeof(struct fuse_mount_data));
d->max_read = ~0;
- d->blksize = 512;
+ d->blksize = FUSE_DEFAULT_BLKSIZE;
while ((p = strsep(&opt, ",")) != NULL) {
int token;
@@ -440,6 +442,9 @@
seq_puts(m, ",allow_other");
if (fc->max_read != ~0)
seq_printf(m, ",max_read=%u", fc->max_read);
+ if (mnt->mnt_sb->s_bdev &&
+ mnt->mnt_sb->s_blocksize != FUSE_DEFAULT_BLKSIZE)
+ seq_printf(m, ",blksize=%lu", mnt->mnt_sb->s_blocksize);
return 0;
}
diff --git a/fs/hfsplus/unicode.c b/fs/hfsplus/unicode.c
index 9e10f94..628ccf6 100644
--- a/fs/hfsplus/unicode.c
+++ b/fs/hfsplus/unicode.c
@@ -325,7 +325,7 @@
struct super_block *sb = dentry->d_sb;
const char *astr;
const u16 *dstr;
- int casefold, decompose, size, dsize, len;
+ int casefold, decompose, size, len;
unsigned long hash;
wchar_t c;
u16 c2;
@@ -336,6 +336,7 @@
astr = str->name;
len = str->len;
while (len > 0) {
+ int uninitialized_var(dsize);
size = asc2unichar(sb, astr, len, &c);
astr += size;
len -= size;
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 2b9b357..d0549cb 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -11,6 +11,7 @@
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/statfs.h>
+#include <linux/seq_file.h>
#include "hostfs.h"
#include "init.h"
#include "kern.h"
@@ -322,12 +323,25 @@
kfree(HOSTFS_I(inode));
}
+static int hostfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
+{
+ struct inode *root = vfs->mnt_sb->s_root->d_inode;
+ const char *root_path = HOSTFS_I(root)->host_filename;
+ size_t offset = strlen(root_ino) + 1;
+
+ if (strlen(root_path) > offset)
+ seq_printf(seq, ",%s", root_path + offset);
+
+ return 0;
+}
+
static const struct super_operations hostfs_sbops = {
.alloc_inode = hostfs_alloc_inode,
.drop_inode = generic_delete_inode,
.delete_inode = hostfs_delete_inode,
.destroy_inode = hostfs_destroy_inode,
.statfs = hostfs_statfs,
+ .show_options = hostfs_show_options,
};
int hostfs_readdir(struct file *file, void *ent, filldir_t filldir)
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index 00971d9..f63a699 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -386,6 +386,7 @@
int lowercase, conv, eas, chk, errs, chkdsk, timeshift;
int o;
struct hpfs_sb_info *sbi = hpfs_sb(s);
+ char *new_opts = kstrdup(data, GFP_KERNEL);
*flags |= MS_NOATIME;
@@ -398,15 +399,15 @@
if (!(o = parse_opts(data, &uid, &gid, &umask, &lowercase, &conv,
&eas, &chk, &errs, &chkdsk, ×hift))) {
printk("HPFS: bad mount options.\n");
- return 1;
+ goto out_err;
}
if (o == 2) {
hpfs_help();
- return 1;
+ goto out_err;
}
if (timeshift != sbi->sb_timeshift) {
printk("HPFS: timeshift can't be changed using remount.\n");
- return 1;
+ goto out_err;
}
unmark_dirty(s);
@@ -419,7 +420,14 @@
if (!(*flags & MS_RDONLY)) mark_dirty(s);
+ kfree(s->s_options);
+ s->s_options = new_opts;
+
return 0;
+
+out_err:
+ kfree(new_opts);
+ return -EINVAL;
}
/* Super operations */
@@ -432,6 +440,7 @@
.put_super = hpfs_put_super,
.statfs = hpfs_statfs,
.remount_fs = hpfs_remount_fs,
+ .show_options = generic_show_options,
};
static int hpfs_fill_super(struct super_block *s, void *options, int silent)
@@ -454,6 +463,8 @@
int o;
+ save_mount_options(s, options);
+
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 3b3cc28..eee9487 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -734,6 +734,7 @@
.delete_inode = hugetlbfs_delete_inode,
.drop_inode = hugetlbfs_drop_inode,
.put_super = hugetlbfs_put_super,
+ .show_options = generic_show_options,
};
static int
@@ -817,6 +818,8 @@
struct hugetlbfs_config config;
struct hugetlbfs_sb_info *sbinfo;
+ save_mount_options(sb, data);
+
config.nr_blocks = -1; /* No limit on size by default */
config.nr_inodes = -1; /* No limit on number of inodes by default */
config.uid = current->fsuid;
diff --git a/fs/inotify_user.c b/fs/inotify_user.c
index a336c97..3ab09a6 100644
--- a/fs/inotify_user.c
+++ b/fs/inotify_user.c
@@ -283,7 +283,7 @@
/* we can safely put the watch as we don't reference it while
* generating the event
*/
- if (mask & IN_IGNORED || mask & IN_ONESHOT)
+ if (mask & IN_IGNORED || w->mask & IN_ONESHOT)
put_inotify_watch(w); /* final put */
/* coalescing: drop this event if it is a dupe of the previous */
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 875d37f..044a254 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -110,6 +110,7 @@
.put_super = isofs_put_super,
.statfs = isofs_statfs,
.remount_fs = isofs_remount,
+ .show_options = generic_show_options,
};
@@ -144,7 +145,8 @@
char nocompress;
unsigned char check;
unsigned int blocksize;
- mode_t mode;
+ mode_t fmode;
+ mode_t dmode;
gid_t gid;
uid_t uid;
char *iocharset;
@@ -305,7 +307,7 @@
Opt_block, Opt_check_r, Opt_check_s, Opt_cruft, Opt_gid, Opt_ignore,
Opt_iocharset, Opt_map_a, Opt_map_n, Opt_map_o, Opt_mode, Opt_nojoliet,
Opt_norock, Opt_sb, Opt_session, Opt_uid, Opt_unhide, Opt_utf8, Opt_err,
- Opt_nocompress, Opt_hide, Opt_showassoc,
+ Opt_nocompress, Opt_hide, Opt_showassoc, Opt_dmode,
};
static match_table_t tokens = {
@@ -332,6 +334,7 @@
{Opt_uid, "uid=%u"},
{Opt_gid, "gid=%u"},
{Opt_mode, "mode=%u"},
+ {Opt_dmode, "dmode=%u"},
{Opt_block, "block=%u"},
{Opt_ignore, "conv=binary"},
{Opt_ignore, "conv=b"},
@@ -359,7 +362,7 @@
popt->check = 'u'; /* unset */
popt->nocompress = 0;
popt->blocksize = 1024;
- popt->mode = S_IRUGO | S_IXUGO; /*
+ popt->fmode = popt->dmode = S_IRUGO | S_IXUGO; /*
* r-x for all. The disc could
* be shared with DOS machines so
* virtually anything could be
@@ -451,7 +454,12 @@
case Opt_mode:
if (match_int(&args[0], &option))
return 0;
- popt->mode = option;
+ popt->fmode = option;
+ break;
+ case Opt_dmode:
+ if (match_int(&args[0], &option))
+ return 0;
+ popt->dmode = option;
break;
case Opt_block:
if (match_int(&args[0], &option))
@@ -554,6 +562,8 @@
int table, error = -EINVAL;
unsigned int vol_desc_start;
+ save_mount_options(s, data);
+
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
@@ -801,7 +811,8 @@
* on the disk as suid, so we merely allow them to set the default
* permissions.
*/
- sbi->s_mode = opt.mode & 0777;
+ sbi->s_fmode = opt.fmode & 0777;
+ sbi->s_dmode = opt.dmode & 0777;
/*
* Read the root inode, which _may_ result in changing
@@ -1248,7 +1259,7 @@
ei->i_file_format = isofs_file_normal;
if (de->flags[-high_sierra] & 2) {
- inode->i_mode = S_IRUGO | S_IXUGO | S_IFDIR;
+ inode->i_mode = sbi->s_dmode | S_IFDIR;
inode->i_nlink = 1; /*
* Set to 1. We know there are 2, but
* the find utility tries to optimize
@@ -1258,9 +1269,8 @@
*/
} else {
/* Everybody gets to read the file. */
- inode->i_mode = sbi->s_mode;
+ inode->i_mode = sbi->s_fmode | S_IFREG;
inode->i_nlink = 1;
- inode->i_mode |= S_IFREG;
}
inode->i_uid = sbi->s_uid;
inode->i_gid = sbi->s_gid;
diff --git a/fs/isofs/isofs.h b/fs/isofs/isofs.h
index f3213f9..d1bdf8ad 100644
--- a/fs/isofs/isofs.h
+++ b/fs/isofs/isofs.h
@@ -51,7 +51,8 @@
unsigned char s_hide;
unsigned char s_showassoc;
- mode_t s_mode;
+ mode_t s_fmode;
+ mode_t s_dmode;
gid_t s_gid;
uid_t s_uid;
struct nls_table *s_nls_iocharset; /* Native language support table */
diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index 31853eb..8e08efc 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -131,6 +131,8 @@
barrier_done = 1;
}
ret = sync_dirty_buffer(bh);
+ if (barrier_done)
+ clear_buffer_ordered(bh);
/* is it possible for another commit to fail at roughly
* the same time as this one? If so, we don't want to
* trust the barrier flag in the super, but instead want
@@ -148,7 +150,6 @@
spin_unlock(&journal->j_state_lock);
/* And try again, without the barrier */
- clear_buffer_ordered(bh);
set_buffer_uptodate(bh);
set_buffer_dirty(bh);
ret = sync_dirty_buffer(bh);
diff --git a/fs/libfs.c b/fs/libfs.c
index 5523bde..b004dfa 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -583,8 +583,8 @@
/* Simple attribute files */
struct simple_attr {
- u64 (*get)(void *);
- void (*set)(void *, u64);
+ int (*get)(void *, u64 *);
+ int (*set)(void *, u64);
char get_buf[24]; /* enough to store a u64 and "\n\0" */
char set_buf[24];
void *data;
@@ -595,7 +595,7 @@
/* simple_attr_open is called by an actual attribute open file operation
* to set the attribute specific access operations. */
int simple_attr_open(struct inode *inode, struct file *file,
- u64 (*get)(void *), void (*set)(void *, u64),
+ int (*get)(void *, u64 *), int (*set)(void *, u64),
const char *fmt)
{
struct simple_attr *attr;
@@ -615,7 +615,7 @@
return nonseekable_open(inode, file);
}
-int simple_attr_close(struct inode *inode, struct file *file)
+int simple_attr_release(struct inode *inode, struct file *file)
{
kfree(file->private_data);
return 0;
@@ -634,15 +634,24 @@
if (!attr->get)
return -EACCES;
- mutex_lock(&attr->mutex);
- if (*ppos) /* continued read */
+ ret = mutex_lock_interruptible(&attr->mutex);
+ if (ret)
+ return ret;
+
+ if (*ppos) { /* continued read */
size = strlen(attr->get_buf);
- else /* first read */
+ } else { /* first read */
+ u64 val;
+ ret = attr->get(attr->data, &val);
+ if (ret)
+ goto out;
+
size = scnprintf(attr->get_buf, sizeof(attr->get_buf),
- attr->fmt,
- (unsigned long long)attr->get(attr->data));
+ attr->fmt, (unsigned long long)val);
+ }
ret = simple_read_from_buffer(buf, len, ppos, attr->get_buf, size);
+out:
mutex_unlock(&attr->mutex);
return ret;
}
@@ -657,11 +666,13 @@
ssize_t ret;
attr = file->private_data;
-
if (!attr->set)
return -EACCES;
- mutex_lock(&attr->mutex);
+ ret = mutex_lock_interruptible(&attr->mutex);
+ if (ret)
+ return ret;
+
ret = -EFAULT;
size = min(sizeof(attr->set_buf) - 1, len);
if (copy_from_user(attr->set_buf, buf, size))
@@ -793,6 +804,6 @@
EXPORT_SYMBOL(simple_transaction_read);
EXPORT_SYMBOL(simple_transaction_release);
EXPORT_SYMBOL_GPL(simple_attr_open);
-EXPORT_SYMBOL_GPL(simple_attr_close);
+EXPORT_SYMBOL_GPL(simple_attr_release);
EXPORT_SYMBOL_GPL(simple_attr_read);
EXPORT_SYMBOL_GPL(simple_attr_write);
diff --git a/fs/locks.c b/fs/locks.c
index 49354b9..f36f0e6 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -658,8 +658,7 @@
if (cfl) {
__locks_copy_lock(fl, cfl);
if (cfl->fl_nspid)
- fl->fl_pid = pid_nr_ns(cfl->fl_nspid,
- task_active_pid_ns(current));
+ fl->fl_pid = pid_vnr(cfl->fl_nspid);
} else
fl->fl_type = F_UNLCK;
unlock_kernel();
@@ -2084,7 +2083,7 @@
unsigned int fl_pid;
if (fl->fl_nspid)
- fl_pid = pid_nr_ns(fl->fl_nspid, task_active_pid_ns(current));
+ fl_pid = pid_vnr(fl->fl_nspid);
else
fl_pid = fl->fl_pid;
diff --git a/fs/namei.c b/fs/namei.c
index 241cff4..5270398 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -106,7 +106,7 @@
* any extra contention...
*/
-static int fastcall link_path_walk(const char *name, struct nameidata *nd);
+static int link_path_walk(const char *name, struct nameidata *nd);
/* In order to reduce some races, while at the same time doing additional
* checking and hopefully speeding things up, we copy filenames to the
@@ -823,7 +823,7 @@
* Returns 0 and nd will have valid dentry and mnt on success.
* Returns error and drops reference to input namei data on failure.
*/
-static fastcall int __link_path_walk(const char * name, struct nameidata *nd)
+static int __link_path_walk(const char *name, struct nameidata *nd)
{
struct path next;
struct inode *inode;
@@ -1015,7 +1015,7 @@
* Retry the whole path once, forcing real lookup requests
* instead of relying on the dcache.
*/
-static int fastcall link_path_walk(const char *name, struct nameidata *nd)
+static int link_path_walk(const char *name, struct nameidata *nd)
{
struct nameidata save = *nd;
int result;
@@ -1039,7 +1039,7 @@
return result;
}
-static int fastcall path_walk(const char * name, struct nameidata *nd)
+static int path_walk(const char *name, struct nameidata *nd)
{
current->total_link_count = 0;
return link_path_walk(name, nd);
@@ -1116,7 +1116,7 @@
}
/* Returns 0 and nd will be valid on success; Retuns error, otherwise. */
-static int fastcall do_path_lookup(int dfd, const char *name,
+static int do_path_lookup(int dfd, const char *name,
unsigned int flags, struct nameidata *nd)
{
int retval = 0;
@@ -1183,7 +1183,7 @@
goto out_fail;
}
-int fastcall path_lookup(const char *name, unsigned int flags,
+int path_lookup(const char *name, unsigned int flags,
struct nameidata *nd)
{
return do_path_lookup(AT_FDCWD, name, flags, nd);
@@ -1409,7 +1409,7 @@
return __lookup_hash(&this, base, NULL);
}
-int fastcall __user_walk_fd(int dfd, const char __user *name, unsigned flags,
+int __user_walk_fd(int dfd, const char __user *name, unsigned flags,
struct nameidata *nd)
{
char *tmp = getname(name);
@@ -1422,7 +1422,7 @@
return err;
}
-int fastcall __user_walk(const char __user *name, unsigned flags, struct nameidata *nd)
+int __user_walk(const char __user *name, unsigned flags, struct nameidata *nd)
{
return __user_walk_fd(AT_FDCWD, name, flags, nd);
}
diff --git a/fs/namespace.c b/fs/namespace.c
index e9c10cd..63ced21 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -320,6 +320,50 @@
EXPORT_SYMBOL(mnt_unpin);
+static inline void mangle(struct seq_file *m, const char *s)
+{
+ seq_escape(m, s, " \t\n\\");
+}
+
+/*
+ * Simple .show_options callback for filesystems which don't want to
+ * implement more complex mount option showing.
+ *
+ * See also save_mount_options().
+ */
+int generic_show_options(struct seq_file *m, struct vfsmount *mnt)
+{
+ const char *options = mnt->mnt_sb->s_options;
+
+ if (options != NULL && options[0]) {
+ seq_putc(m, ',');
+ mangle(m, options);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(generic_show_options);
+
+/*
+ * If filesystem uses generic_show_options(), this function should be
+ * called from the fill_super() callback.
+ *
+ * The .remount_fs callback usually needs to be handled in a special
+ * way, to make sure, that previous options are not overwritten if the
+ * remount fails.
+ *
+ * Also note, that if the filesystem's .remount_fs function doesn't
+ * reset all options to their default value, but changes only newly
+ * given options, then the displayed options will not reflect reality
+ * any more.
+ */
+void save_mount_options(struct super_block *sb, char *options)
+{
+ kfree(sb->s_options);
+ sb->s_options = kstrdup(options, GFP_KERNEL);
+}
+EXPORT_SYMBOL(save_mount_options);
+
/* iterator */
static void *m_start(struct seq_file *m, loff_t *pos)
{
@@ -341,11 +385,6 @@
up_read(&namespace_sem);
}
-static inline void mangle(struct seq_file *m, const char *s)
-{
- seq_escape(m, s, " \t\n\\");
-}
-
static int show_vfsmnt(struct seq_file *m, void *v)
{
struct vfsmount *mnt = list_entry(v, struct vfsmount, mnt_list);
@@ -897,8 +936,9 @@
/*
* recursively change the type of the mountpoint.
+ * noinline this do_mount helper to save do_mount stack space.
*/
-static int do_change_type(struct nameidata *nd, int flag)
+static noinline int do_change_type(struct nameidata *nd, int flag)
{
struct vfsmount *m, *mnt = nd->mnt;
int recurse = flag & MS_REC;
@@ -921,8 +961,10 @@
/*
* do loopback mount.
+ * noinline this do_mount helper to save do_mount stack space.
*/
-static int do_loopback(struct nameidata *nd, char *old_name, int recurse)
+static noinline int do_loopback(struct nameidata *nd, char *old_name,
+ int recurse)
{
struct nameidata old_nd;
struct vfsmount *mnt = NULL;
@@ -971,8 +1013,9 @@
* change filesystem flags. dir should be a physical root of filesystem.
* If you've mounted a non-root directory somewhere and want to do remount
* on it - tough luck.
+ * noinline this do_mount helper to save do_mount stack space.
*/
-static int do_remount(struct nameidata *nd, int flags, int mnt_flags,
+static noinline int do_remount(struct nameidata *nd, int flags, int mnt_flags,
void *data)
{
int err;
@@ -1007,7 +1050,10 @@
return 0;
}
-static int do_move_mount(struct nameidata *nd, char *old_name)
+/*
+ * noinline this do_mount helper to save do_mount stack space.
+ */
+static noinline int do_move_mount(struct nameidata *nd, char *old_name)
{
struct nameidata old_nd, parent_nd;
struct vfsmount *p;
@@ -1082,8 +1128,9 @@
/*
* create a new mount for userspace and request it to be added into the
* namespace's tree
+ * noinline this do_mount helper to save do_mount stack space.
*/
-static int do_new_mount(struct nameidata *nd, char *type, int flags,
+static noinline int do_new_mount(struct nameidata *nd, char *type, int flags,
int mnt_flags, char *name, void *data)
{
struct vfsmount *mnt;
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index eff1f18..fbbb9f7 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -28,6 +28,8 @@
#include <linux/init.h>
#include <linux/smp_lock.h>
#include <linux/vfs.h>
+#include <linux/mount.h>
+#include <linux/seq_file.h>
#include <linux/ncp_fs.h>
@@ -36,9 +38,15 @@
#include "ncplib_kernel.h"
#include "getopt.h"
+#define NCP_DEFAULT_FILE_MODE 0600
+#define NCP_DEFAULT_DIR_MODE 0700
+#define NCP_DEFAULT_TIME_OUT 10
+#define NCP_DEFAULT_RETRY_COUNT 20
+
static void ncp_delete_inode(struct inode *);
static void ncp_put_super(struct super_block *);
static int ncp_statfs(struct dentry *, struct kstatfs *);
+static int ncp_show_options(struct seq_file *, struct vfsmount *);
static struct kmem_cache * ncp_inode_cachep;
@@ -96,6 +104,7 @@
.put_super = ncp_put_super,
.statfs = ncp_statfs,
.remount_fs = ncp_remount,
+ .show_options = ncp_show_options,
};
extern struct dentry_operations ncp_root_dentry_operations;
@@ -304,6 +313,37 @@
flush_scheduled_work();
}
+static int ncp_show_options(struct seq_file *seq, struct vfsmount *mnt)
+{
+ struct ncp_server *server = NCP_SBP(mnt->mnt_sb);
+ unsigned int tmp;
+
+ if (server->m.uid != 0)
+ seq_printf(seq, ",uid=%u", server->m.uid);
+ if (server->m.gid != 0)
+ seq_printf(seq, ",gid=%u", server->m.gid);
+ if (server->m.mounted_uid != 0)
+ seq_printf(seq, ",owner=%u", server->m.mounted_uid);
+ tmp = server->m.file_mode & S_IALLUGO;
+ if (tmp != NCP_DEFAULT_FILE_MODE)
+ seq_printf(seq, ",mode=0%o", tmp);
+ tmp = server->m.dir_mode & S_IALLUGO;
+ if (tmp != NCP_DEFAULT_DIR_MODE)
+ seq_printf(seq, ",dirmode=0%o", tmp);
+ if (server->m.time_out != NCP_DEFAULT_TIME_OUT * HZ / 100) {
+ tmp = server->m.time_out * 100 / HZ;
+ seq_printf(seq, ",timeout=%u", tmp);
+ }
+ if (server->m.retry_count != NCP_DEFAULT_RETRY_COUNT)
+ seq_printf(seq, ",retry=%u", server->m.retry_count);
+ if (server->m.flags != 0)
+ seq_printf(seq, ",flags=%lu", server->m.flags);
+ if (server->m.wdog_pid != NULL)
+ seq_printf(seq, ",wdogpid=%u", pid_vnr(server->m.wdog_pid));
+
+ return 0;
+}
+
static const struct ncp_option ncp_opts[] = {
{ "uid", OPT_INT, 'u' },
{ "gid", OPT_INT, 'g' },
@@ -331,12 +371,12 @@
data->mounted_uid = 0;
data->wdog_pid = NULL;
data->ncp_fd = ~0;
- data->time_out = 10;
- data->retry_count = 20;
+ data->time_out = NCP_DEFAULT_TIME_OUT;
+ data->retry_count = NCP_DEFAULT_RETRY_COUNT;
data->uid = 0;
data->gid = 0;
- data->file_mode = 0600;
- data->dir_mode = 0700;
+ data->file_mode = NCP_DEFAULT_FILE_MODE;
+ data->dir_mode = NCP_DEFAULT_DIR_MODE;
data->info_fd = -1;
data->mounted_vol[0] = 0;
@@ -982,6 +1022,7 @@
.name = "ncpfs",
.get_sb = ncp_get_sb,
.kill_sb = kill_anon_super,
+ .fs_flags = FS_BINARY_MOUNTDATA,
};
static int __init init_ncp_fs(void)
diff --git a/fs/ocfs2/cluster/endian.h b/fs/ocfs2/cluster/endian.h
deleted file mode 100644
index 2df9082..0000000
--- a/fs/ocfs2/cluster/endian.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8; -*-
- * vim: noexpandtab sw=8 ts=8 sts=0:
- *
- * Copyright (C) 2005 Oracle. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 021110-1307, USA.
- */
-
-#ifndef OCFS2_CLUSTER_ENDIAN_H
-#define OCFS2_CLUSTER_ENDIAN_H
-
-static inline void be32_add_cpu(__be32 *var, u32 val)
-{
- *var = cpu_to_be32(be32_to_cpu(*var) + val);
-}
-
-#endif /* OCFS2_CLUSTER_ENDIAN_H */
diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c
index af2070d..709fba2 100644
--- a/fs/ocfs2/cluster/nodemanager.c
+++ b/fs/ocfs2/cluster/nodemanager.c
@@ -24,7 +24,6 @@
#include <linux/sysctl.h>
#include <linux/configfs.h>
-#include "endian.h"
#include "tcp.h"
#include "nodemanager.h"
#include "heartbeat.h"
diff --git a/fs/ocfs2/dlm/dlmast.c b/fs/ocfs2/dlm/dlmast.c
index 2fd8bde..644bee5 100644
--- a/fs/ocfs2/dlm/dlmast.c
+++ b/fs/ocfs2/dlm/dlmast.c
@@ -43,7 +43,6 @@
#include "cluster/heartbeat.h"
#include "cluster/nodemanager.h"
#include "cluster/tcp.h"
-#include "cluster/endian.h"
#include "dlmapi.h"
#include "dlmcommon.h"
diff --git a/fs/ocfs2/endian.h b/fs/ocfs2/endian.h
deleted file mode 100644
index 1942e09..0000000
--- a/fs/ocfs2/endian.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8; -*-
- * vim: noexpandtab sw=8 ts=8 sts=0:
- *
- * Copyright (C) 2005 Oracle. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 021110-1307, USA.
- */
-
-#ifndef OCFS2_ENDIAN_H
-#define OCFS2_ENDIAN_H
-
-static inline void le16_add_cpu(__le16 *var, u16 val)
-{
- *var = cpu_to_le16(le16_to_cpu(*var) + val);
-}
-
-static inline void le32_add_cpu(__le32 *var, u32 val)
-{
- *var = cpu_to_le32(le32_to_cpu(*var) + val);
-}
-
-static inline void le64_add_cpu(__le64 *var, u64 val)
-{
- *var = cpu_to_le64(le64_to_cpu(*var) + val);
-}
-
-static inline void be32_add_cpu(__be32 *var, u32 val)
-{
- *var = cpu_to_be32(be32_to_cpu(*var) + val);
-}
-
-#endif /* OCFS2_ENDIAN_H */
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index e8b7292..6546cef 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -43,7 +43,6 @@
#include "dlm/dlmapi.h"
#include "ocfs2_fs.h"
-#include "endian.h"
#include "ocfs2_lockid.h"
/* Most user visible OCFS2 inodes will have very few pieces of
diff --git a/fs/open.c b/fs/open.c
index 4932b4d1..43fcd60 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -991,7 +991,7 @@
files->next_fd = fd;
}
-void fastcall put_unused_fd(unsigned int fd)
+void put_unused_fd(unsigned int fd)
{
struct files_struct *files = current->files;
spin_lock(&files->file_lock);
@@ -1014,7 +1014,7 @@
* will follow.
*/
-void fastcall fd_install(unsigned int fd, struct file * file)
+void fd_install(unsigned int fd, struct file *file)
{
struct files_struct *files = current->files;
struct fdtable *fdt;
@@ -1061,7 +1061,6 @@
prevent_tail_call(ret);
return ret;
}
-EXPORT_UNUSED_SYMBOL_GPL(sys_open); /* To be deleted for 2.6.25 */
asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
int mode)
diff --git a/fs/pipe.c b/fs/pipe.c
index e66ec48..a07e9a5 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -576,9 +576,7 @@
return -EBADF;
}
-static int
-pipe_ioctl(struct inode *pino, struct file *filp,
- unsigned int cmd, unsigned long arg)
+static long pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = filp->f_path.dentry->d_inode;
struct pipe_inode_info *pipe;
@@ -785,7 +783,7 @@
.aio_read = pipe_read,
.write = bad_pipe_w,
.poll = pipe_poll,
- .ioctl = pipe_ioctl,
+ .unlocked_ioctl = pipe_ioctl,
.open = pipe_read_open,
.release = pipe_read_release,
.fasync = pipe_read_fasync,
@@ -797,7 +795,7 @@
.write = do_sync_write,
.aio_write = pipe_write,
.poll = pipe_poll,
- .ioctl = pipe_ioctl,
+ .unlocked_ioctl = pipe_ioctl,
.open = pipe_write_open,
.release = pipe_write_release,
.fasync = pipe_write_fasync,
@@ -810,7 +808,7 @@
.write = do_sync_write,
.aio_write = pipe_write,
.poll = pipe_poll,
- .ioctl = pipe_ioctl,
+ .unlocked_ioctl = pipe_ioctl,
.open = pipe_rdwr_open,
.release = pipe_rdwr_release,
.fasync = pipe_rdwr_fasync,
@@ -822,7 +820,7 @@
.aio_read = pipe_read,
.write = bad_pipe_w,
.poll = pipe_poll,
- .ioctl = pipe_ioctl,
+ .unlocked_ioctl = pipe_ioctl,
.open = pipe_read_open,
.release = pipe_read_release,
.fasync = pipe_read_fasync,
@@ -834,7 +832,7 @@
.write = do_sync_write,
.aio_write = pipe_write,
.poll = pipe_poll,
- .ioctl = pipe_ioctl,
+ .unlocked_ioctl = pipe_ioctl,
.open = pipe_write_open,
.release = pipe_write_release,
.fasync = pipe_write_fasync,
@@ -847,7 +845,7 @@
.write = do_sync_write,
.aio_write = pipe_write,
.poll = pipe_poll,
- .ioctl = pipe_ioctl,
+ .unlocked_ioctl = pipe_ioctl,
.open = pipe_rdwr_open,
.release = pipe_rdwr_release,
.fasync = pipe_rdwr_fasync,
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 6ba2746..07d6c48 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -77,6 +77,7 @@
#include <linux/cpuset.h>
#include <linux/rcupdate.h>
#include <linux/delayacct.h>
+#include <linux/seq_file.h>
#include <linux/pid_namespace.h>
#include <asm/pgtable.h>
@@ -88,18 +89,21 @@
do { memcpy(buffer, string, strlen(string)); \
buffer += strlen(string); } while (0)
-static inline char *task_name(struct task_struct *p, char *buf)
+static inline void task_name(struct seq_file *m, struct task_struct *p)
{
int i;
+ char *buf, *end;
char *name;
char tcomm[sizeof(p->comm)];
get_task_comm(tcomm, p);
- ADDBUF(buf, "Name:\t");
+ seq_printf(m, "Name:\t");
+ end = m->buf + m->size;
+ buf = m->buf + m->count;
name = tcomm;
i = sizeof(tcomm);
- do {
+ while (i && (buf < end)) {
unsigned char c = *name;
name++;
i--;
@@ -107,20 +111,21 @@
if (!c)
break;
if (c == '\\') {
- buf[1] = c;
- buf += 2;
+ buf++;
+ if (buf < end)
+ *buf++ = c;
continue;
}
if (c == '\n') {
- buf[0] = '\\';
- buf[1] = 'n';
- buf += 2;
+ *buf++ = '\\';
+ if (buf < end)
+ *buf++ = 'n';
continue;
}
buf++;
- } while (i);
- *buf = '\n';
- return buf+1;
+ }
+ m->count = buf - m->buf;
+ seq_printf(m, "\n");
}
/*
@@ -151,21 +156,20 @@
return *p;
}
-static inline char *task_state(struct task_struct *p, char *buffer)
+static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
+ struct pid *pid, struct task_struct *p)
{
struct group_info *group_info;
int g;
struct fdtable *fdt = NULL;
- struct pid_namespace *ns;
pid_t ppid, tpid;
- ns = current->nsproxy->pid_ns;
rcu_read_lock();
ppid = pid_alive(p) ?
task_tgid_nr_ns(rcu_dereference(p->real_parent), ns) : 0;
tpid = pid_alive(p) && p->ptrace ?
task_pid_nr_ns(rcu_dereference(p->parent), ns) : 0;
- buffer += sprintf(buffer,
+ seq_printf(m,
"State:\t%s\n"
"Tgid:\t%d\n"
"Pid:\t%d\n"
@@ -175,7 +179,7 @@
"Gid:\t%d\t%d\t%d\t%d\n",
get_task_state(p),
task_tgid_nr_ns(p, ns),
- task_pid_nr_ns(p, ns),
+ pid_nr_ns(pid, ns),
ppid, tpid,
p->uid, p->euid, p->suid, p->fsuid,
p->gid, p->egid, p->sgid, p->fsgid);
@@ -183,7 +187,7 @@
task_lock(p);
if (p->files)
fdt = files_fdtable(p->files);
- buffer += sprintf(buffer,
+ seq_printf(m,
"FDSize:\t%d\n"
"Groups:\t",
fdt ? fdt->max_fds : 0);
@@ -194,20 +198,18 @@
task_unlock(p);
for (g = 0; g < min(group_info->ngroups, NGROUPS_SMALL); g++)
- buffer += sprintf(buffer, "%d ", GROUP_AT(group_info, g));
+ seq_printf(m, "%d ", GROUP_AT(group_info, g));
put_group_info(group_info);
- buffer += sprintf(buffer, "\n");
- return buffer;
+ seq_printf(m, "\n");
}
-static char *render_sigset_t(const char *header, sigset_t *set, char *buffer)
+static void render_sigset_t(struct seq_file *m, const char *header,
+ sigset_t *set)
{
- int i, len;
+ int i;
- len = strlen(header);
- memcpy(buffer, header, len);
- buffer += len;
+ seq_printf(m, "%s", header);
i = _NSIG;
do {
@@ -218,12 +220,10 @@
if (sigismember(set, i+2)) x |= 2;
if (sigismember(set, i+3)) x |= 4;
if (sigismember(set, i+4)) x |= 8;
- *buffer++ = (x < 10 ? '0' : 'a' - 10) + x;
+ seq_printf(m, "%x", x);
} while (i >= 4);
- *buffer++ = '\n';
- *buffer = 0;
- return buffer;
+ seq_printf(m, "\n");
}
static void collect_sigign_sigcatch(struct task_struct *p, sigset_t *ign,
@@ -241,7 +241,7 @@
}
}
-static inline char *task_sig(struct task_struct *p, char *buffer)
+static inline void task_sig(struct seq_file *m, struct task_struct *p)
{
unsigned long flags;
sigset_t pending, shpending, blocked, ignored, caught;
@@ -268,67 +268,66 @@
}
rcu_read_unlock();
- buffer += sprintf(buffer, "Threads:\t%d\n", num_threads);
- buffer += sprintf(buffer, "SigQ:\t%lu/%lu\n", qsize, qlim);
+ seq_printf(m, "Threads:\t%d\n", num_threads);
+ seq_printf(m, "SigQ:\t%lu/%lu\n", qsize, qlim);
/* render them all */
- buffer = render_sigset_t("SigPnd:\t", &pending, buffer);
- buffer = render_sigset_t("ShdPnd:\t", &shpending, buffer);
- buffer = render_sigset_t("SigBlk:\t", &blocked, buffer);
- buffer = render_sigset_t("SigIgn:\t", &ignored, buffer);
- buffer = render_sigset_t("SigCgt:\t", &caught, buffer);
-
- return buffer;
+ render_sigset_t(m, "SigPnd:\t", &pending);
+ render_sigset_t(m, "ShdPnd:\t", &shpending);
+ render_sigset_t(m, "SigBlk:\t", &blocked);
+ render_sigset_t(m, "SigIgn:\t", &ignored);
+ render_sigset_t(m, "SigCgt:\t", &caught);
}
-static char *render_cap_t(const char *header, kernel_cap_t *a, char *buffer)
+static void render_cap_t(struct seq_file *m, const char *header,
+ kernel_cap_t *a)
{
unsigned __capi;
- buffer += sprintf(buffer, "%s", header);
+ seq_printf(m, "%s", header);
CAP_FOR_EACH_U32(__capi) {
- buffer += sprintf(buffer, "%08x",
- a->cap[(_LINUX_CAPABILITY_U32S-1) - __capi]);
+ seq_printf(m, "%08x",
+ a->cap[(_LINUX_CAPABILITY_U32S-1) - __capi]);
}
- return buffer + sprintf(buffer, "\n");
+ seq_printf(m, "\n");
}
-static inline char *task_cap(struct task_struct *p, char *buffer)
+static inline void task_cap(struct seq_file *m, struct task_struct *p)
{
- buffer = render_cap_t("CapInh:\t", &p->cap_inheritable, buffer);
- buffer = render_cap_t("CapPrm:\t", &p->cap_permitted, buffer);
- return render_cap_t("CapEff:\t", &p->cap_effective, buffer);
+ render_cap_t(m, "CapInh:\t", &p->cap_inheritable);
+ render_cap_t(m, "CapPrm:\t", &p->cap_permitted);
+ render_cap_t(m, "CapEff:\t", &p->cap_effective);
}
-static inline char *task_context_switch_counts(struct task_struct *p,
- char *buffer)
+static inline void task_context_switch_counts(struct seq_file *m,
+ struct task_struct *p)
{
- return buffer + sprintf(buffer, "voluntary_ctxt_switches:\t%lu\n"
- "nonvoluntary_ctxt_switches:\t%lu\n",
- p->nvcsw,
- p->nivcsw);
+ seq_printf(m, "voluntary_ctxt_switches:\t%lu\n"
+ "nonvoluntary_ctxt_switches:\t%lu\n",
+ p->nvcsw,
+ p->nivcsw);
}
-int proc_pid_status(struct task_struct *task, char *buffer)
+int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
+ struct pid *pid, struct task_struct *task)
{
- char *orig = buffer;
struct mm_struct *mm = get_task_mm(task);
- buffer = task_name(task, buffer);
- buffer = task_state(task, buffer);
+ task_name(m, task);
+ task_state(m, ns, pid, task);
if (mm) {
- buffer = task_mem(mm, buffer);
+ task_mem(m, mm);
mmput(mm);
}
- buffer = task_sig(task, buffer);
- buffer = task_cap(task, buffer);
- buffer = cpuset_task_status_allowed(task, buffer);
+ task_sig(m, task);
+ task_cap(m, task);
+ cpuset_task_status_allowed(m, task);
#if defined(CONFIG_S390)
- buffer = task_show_regs(task, buffer);
+ task_show_regs(m, task);
#endif
- buffer = task_context_switch_counts(task, buffer);
- return buffer - orig;
+ task_context_switch_counts(m, task);
+ return 0;
}
/*
@@ -390,14 +389,14 @@
return p->gtime;
}
-static int do_task_stat(struct task_struct *task, char *buffer, int whole)
+static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
+ struct pid *pid, struct task_struct *task, int whole)
{
unsigned long vsize, eip, esp, wchan = ~0UL;
long priority, nice;
int tty_pgrp = -1, tty_nr = 0;
sigset_t sigign, sigcatch;
char state;
- int res;
pid_t ppid = 0, pgid = -1, sid = -1;
int num_threads = 0;
struct mm_struct *mm;
@@ -409,9 +408,6 @@
unsigned long rsslim = 0;
char tcomm[sizeof(task->comm)];
unsigned long flags;
- struct pid_namespace *ns;
-
- ns = current->nsproxy->pid_ns;
state = *get_task_state(task);
vsize = eip = esp = 0;
@@ -498,10 +494,10 @@
/* convert nsec -> ticks */
start_time = nsec_to_clock_t(start_time);
- res = sprintf(buffer, "%d (%s) %c %d %d %d %d %d %u %lu \
+ seq_printf(m, "%d (%s) %c %d %d %d %d %d %u %lu \
%lu %lu %lu %lu %lu %ld %ld %ld %ld %d 0 %llu %lu %ld %lu %lu %lu %lu %lu \
%lu %lu %lu %lu %lu %lu %lu %lu %d %d %u %u %llu %lu %ld\n",
- task_pid_nr_ns(task, ns),
+ pid_nr_ns(pid, ns),
tcomm,
state,
ppid,
@@ -550,20 +546,23 @@
cputime_to_clock_t(cgtime));
if (mm)
mmput(mm);
- return res;
+ return 0;
}
-int proc_tid_stat(struct task_struct *task, char *buffer)
+int proc_tid_stat(struct seq_file *m, struct pid_namespace *ns,
+ struct pid *pid, struct task_struct *task)
{
- return do_task_stat(task, buffer, 0);
+ return do_task_stat(m, ns, pid, task, 0);
}
-int proc_tgid_stat(struct task_struct *task, char *buffer)
+int proc_tgid_stat(struct seq_file *m, struct pid_namespace *ns,
+ struct pid *pid, struct task_struct *task)
{
- return do_task_stat(task, buffer, 1);
+ return do_task_stat(m, ns, pid, task, 1);
}
-int proc_pid_statm(struct task_struct *task, char *buffer)
+int proc_pid_statm(struct seq_file *m, struct pid_namespace *ns,
+ struct pid *pid, struct task_struct *task)
{
int size = 0, resident = 0, shared = 0, text = 0, lib = 0, data = 0;
struct mm_struct *mm = get_task_mm(task);
@@ -572,7 +571,8 @@
size = task_statm(mm, &shared, &text, &data, &resident);
mmput(mm);
}
+ seq_printf(m, "%d %d %d %d %d %d %d\n",
+ size, resident, shared, text, lib, data, 0);
- return sprintf(buffer, "%d %d %d %d %d %d %d\n",
- size, resident, shared, text, lib, data, 0);
+ return 0;
}
diff --git a/fs/proc/base.c b/fs/proc/base.c
index c59852b..a0c4ba6 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -121,6 +121,10 @@
NOD(NAME, (S_IFREG|(MODE)), \
NULL, &proc_info_file_operations, \
{ .proc_read = &proc_##OTYPE } )
+#define ONE(NAME, MODE, OTYPE) \
+ NOD(NAME, (S_IFREG|(MODE)), \
+ NULL, &proc_single_file_operations, \
+ { .proc_show = &proc_##OTYPE } )
int maps_protect;
EXPORT_SYMBOL(maps_protect);
@@ -502,7 +506,7 @@
.setattr = proc_setattr,
};
-extern struct seq_operations mounts_op;
+extern const struct seq_operations mounts_op;
struct proc_mounts {
struct seq_file m;
int event;
@@ -581,7 +585,7 @@
.poll = mounts_poll,
};
-extern struct seq_operations mountstats_op;
+extern const struct seq_operations mountstats_op;
static int mountstats_open(struct inode *inode, struct file *file)
{
int ret = seq_open(file, &mountstats_op);
@@ -658,6 +662,45 @@
.read = proc_info_read,
};
+static int proc_single_show(struct seq_file *m, void *v)
+{
+ struct inode *inode = m->private;
+ struct pid_namespace *ns;
+ struct pid *pid;
+ struct task_struct *task;
+ int ret;
+
+ ns = inode->i_sb->s_fs_info;
+ pid = proc_pid(inode);
+ task = get_pid_task(pid, PIDTYPE_PID);
+ if (!task)
+ return -ESRCH;
+
+ ret = PROC_I(inode)->op.proc_show(m, ns, pid, task);
+
+ put_task_struct(task);
+ return ret;
+}
+
+static int proc_single_open(struct inode *inode, struct file *filp)
+{
+ int ret;
+ ret = single_open(filp, proc_single_show, NULL);
+ if (!ret) {
+ struct seq_file *m = filp->private_data;
+
+ m->private = inode;
+ }
+ return ret;
+}
+
+static const struct file_operations proc_single_file_operations = {
+ .open = proc_single_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
static int mem_open(struct inode* inode, struct file* file)
{
file->private_data = (void*)((long)current->self_exec_id);
@@ -2058,15 +2101,23 @@
static int proc_self_readlink(struct dentry *dentry, char __user *buffer,
int buflen)
{
+ struct pid_namespace *ns = dentry->d_sb->s_fs_info;
+ pid_t pid = task_pid_nr_ns(current, ns);
char tmp[PROC_NUMBUF];
- sprintf(tmp, "%d", task_tgid_vnr(current));
+ if (!pid)
+ return -ENOENT;
+ sprintf(tmp, "%d", pid);
return vfs_readlink(dentry,buffer,buflen,tmp);
}
static void *proc_self_follow_link(struct dentry *dentry, struct nameidata *nd)
{
+ struct pid_namespace *ns = dentry->d_sb->s_fs_info;
+ pid_t pid = task_pid_nr_ns(current, ns);
char tmp[PROC_NUMBUF];
- sprintf(tmp, "%d", task_tgid_vnr(current));
+ if (!pid)
+ return ERR_PTR(-ENOENT);
+ sprintf(tmp, "%d", pid);
return ERR_PTR(vfs_follow_link(nd,tmp));
}
@@ -2231,14 +2282,14 @@
DIR("fdinfo", S_IRUSR|S_IXUSR, fdinfo),
REG("environ", S_IRUSR, environ),
INF("auxv", S_IRUSR, pid_auxv),
- INF("status", S_IRUGO, pid_status),
+ ONE("status", S_IRUGO, pid_status),
INF("limits", S_IRUSR, pid_limits),
#ifdef CONFIG_SCHED_DEBUG
REG("sched", S_IRUGO|S_IWUSR, pid_sched),
#endif
INF("cmdline", S_IRUGO, pid_cmdline),
- INF("stat", S_IRUGO, tgid_stat),
- INF("statm", S_IRUGO, pid_statm),
+ ONE("stat", S_IRUGO, tgid_stat),
+ ONE("statm", S_IRUGO, pid_statm),
REG("maps", S_IRUGO, maps),
#ifdef CONFIG_NUMA
REG("numa_maps", S_IRUGO, numa_maps),
@@ -2562,14 +2613,14 @@
DIR("fdinfo", S_IRUSR|S_IXUSR, fdinfo),
REG("environ", S_IRUSR, environ),
INF("auxv", S_IRUSR, pid_auxv),
- INF("status", S_IRUGO, pid_status),
+ ONE("status", S_IRUGO, pid_status),
INF("limits", S_IRUSR, pid_limits),
#ifdef CONFIG_SCHED_DEBUG
REG("sched", S_IRUGO|S_IWUSR, pid_sched),
#endif
INF("cmdline", S_IRUGO, pid_cmdline),
- INF("stat", S_IRUGO, tid_stat),
- INF("statm", S_IRUGO, pid_statm),
+ ONE("stat", S_IRUGO, tid_stat),
+ ONE("statm", S_IRUGO, pid_statm),
REG("maps", S_IRUGO, maps),
#ifdef CONFIG_NUMA
REG("numa_maps", S_IRUGO, numa_maps),
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 6a2fe51..68971e6 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -25,12 +25,6 @@
#include "internal.h"
-static ssize_t proc_file_read(struct file *file, char __user *buf,
- size_t nbytes, loff_t *ppos);
-static ssize_t proc_file_write(struct file *file, const char __user *buffer,
- size_t count, loff_t *ppos);
-static loff_t proc_file_lseek(struct file *, loff_t, int);
-
DEFINE_SPINLOCK(proc_subdir_lock);
static int proc_match(int len, const char *name, struct proc_dir_entry *de)
@@ -40,12 +34,6 @@
return !memcmp(name, de->name, len);
}
-static const struct file_operations proc_file_operations = {
- .llseek = proc_file_lseek,
- .read = proc_file_read,
- .write = proc_file_write,
-};
-
/* buffer size is one page but our output routines use some slack for overruns */
#define PROC_BLOCK_SIZE (PAGE_SIZE - 1024)
@@ -233,6 +221,12 @@
return retval;
}
+static const struct file_operations proc_file_operations = {
+ .llseek = proc_file_lseek,
+ .read = proc_file_read,
+ .write = proc_file_write,
+};
+
static int proc_notify_change(struct dentry *dentry, struct iattr *iattr)
{
struct inode *inode = dentry->d_inode;
@@ -406,12 +400,12 @@
spin_unlock(&proc_subdir_lock);
error = -EINVAL;
inode = proc_get_inode(dir->i_sb, ino, de);
- spin_lock(&proc_subdir_lock);
- break;
+ goto out_unlock;
}
}
}
spin_unlock(&proc_subdir_lock);
+out_unlock:
unlock_kernel();
if (inode) {
@@ -527,6 +521,7 @@
static int proc_register(struct proc_dir_entry * dir, struct proc_dir_entry * dp)
{
unsigned int i;
+ struct proc_dir_entry *tmp;
i = get_inode_number();
if (i == 0)
@@ -550,6 +545,15 @@
}
spin_lock(&proc_subdir_lock);
+
+ for (tmp = dir->subdir; tmp; tmp = tmp->next)
+ if (strcmp(tmp->name, dp->name) == 0) {
+ printk(KERN_WARNING "proc_dir_entry '%s' already "
+ "registered\n", dp->name);
+ dump_stack();
+ break;
+ }
+
dp->next = dir->subdir;
dp->parent = dir;
dir->subdir = dp;
@@ -558,7 +562,7 @@
return 0;
}
-static struct proc_dir_entry *proc_create(struct proc_dir_entry **parent,
+static struct proc_dir_entry *__proc_create(struct proc_dir_entry **parent,
const char *name,
mode_t mode,
nlink_t nlink)
@@ -601,7 +605,7 @@
{
struct proc_dir_entry *ent;
- ent = proc_create(&parent,name,
+ ent = __proc_create(&parent, name,
(S_IFLNK | S_IRUGO | S_IWUGO | S_IXUGO),1);
if (ent) {
@@ -626,7 +630,7 @@
{
struct proc_dir_entry *ent;
- ent = proc_create(&parent, name, S_IFDIR | mode, 2);
+ ent = __proc_create(&parent, name, S_IFDIR | mode, 2);
if (ent) {
if (proc_register(parent, ent) < 0) {
kfree(ent);
@@ -660,7 +664,7 @@
nlink = 1;
}
- ent = proc_create(&parent,name,mode,nlink);
+ ent = __proc_create(&parent, name, mode, nlink);
if (ent) {
if (proc_register(parent, ent) < 0) {
kfree(ent);
@@ -670,6 +674,38 @@
return ent;
}
+struct proc_dir_entry *proc_create(const char *name, mode_t mode,
+ struct proc_dir_entry *parent,
+ const struct file_operations *proc_fops)
+{
+ struct proc_dir_entry *pde;
+ nlink_t nlink;
+
+ if (S_ISDIR(mode)) {
+ if ((mode & S_IALLUGO) == 0)
+ mode |= S_IRUGO | S_IXUGO;
+ nlink = 2;
+ } else {
+ if ((mode & S_IFMT) == 0)
+ mode |= S_IFREG;
+ if ((mode & S_IALLUGO) == 0)
+ mode |= S_IRUGO;
+ nlink = 1;
+ }
+
+ pde = __proc_create(&parent, name, mode, nlink);
+ if (!pde)
+ goto out;
+ pde->proc_fops = proc_fops;
+ if (proc_register(parent, pde) < 0)
+ goto out_free;
+ return pde;
+out_free:
+ kfree(pde);
+out:
+ return NULL;
+}
+
void free_proc_entry(struct proc_dir_entry *de)
{
unsigned int ino = de->low_ino;
@@ -679,7 +715,7 @@
release_inode_number(ino);
- if (S_ISLNK(de->mode) && de->data)
+ if (S_ISLNK(de->mode))
kfree(de->data);
kfree(de);
}
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 6ecf639..82b3a1b 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -467,4 +467,3 @@
de_put(&proc_root);
return -ENOMEM;
}
-MODULE_LICENSE("GPL");
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index 7d57e80..ea496ff 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -46,12 +46,17 @@
extern int maps_protect;
-extern void create_seq_entry(char *name, mode_t mode, const struct file_operations *f);
+extern void create_seq_entry(char *name, mode_t mode,
+ const struct file_operations *f);
extern int proc_exe_link(struct inode *, struct dentry **, struct vfsmount **);
-extern int proc_tid_stat(struct task_struct *, char *);
-extern int proc_tgid_stat(struct task_struct *, char *);
-extern int proc_pid_status(struct task_struct *, char *);
-extern int proc_pid_statm(struct task_struct *, char *);
+extern int proc_tid_stat(struct seq_file *m, struct pid_namespace *ns,
+ struct pid *pid, struct task_struct *task);
+extern int proc_tgid_stat(struct seq_file *m, struct pid_namespace *ns,
+ struct pid *pid, struct task_struct *task);
+extern int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
+ struct pid *pid, struct task_struct *task);
+extern int proc_pid_statm(struct seq_file *m, struct pid_namespace *ns,
+ struct pid *pid, struct task_struct *task);
extern loff_t mem_lseek(struct file *file, loff_t offset, int orig);
extern const struct file_operations proc_maps_operations;
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index 7dd26e1..e78c81f 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -12,7 +12,6 @@
#include <linux/mm.h>
#include <linux/proc_fs.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/capability.h>
#include <linux/elf.h>
#include <linux/elfcore.h>
diff --git a/fs/proc/nommu.c b/fs/proc/nommu.c
index 22f789d..5d9147b 100644
--- a/fs/proc/nommu.c
+++ b/fs/proc/nommu.c
@@ -116,7 +116,7 @@
return rb_next((struct rb_node *) v);
}
-static struct seq_operations proc_nommu_vma_list_seqop = {
+static const struct seq_operations proc_nommu_vma_list_seqop = {
.start = nommu_vma_list_start,
.next = nommu_vma_list_next,
.stop = nommu_vma_list_stop,
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index 2686592..468805d 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -222,7 +222,7 @@
#undef K
}
-extern struct seq_operations fragmentation_op;
+extern const struct seq_operations fragmentation_op;
static int fragmentation_open(struct inode *inode, struct file *file)
{
(void)inode;
@@ -236,7 +236,7 @@
.release = seq_release,
};
-extern struct seq_operations pagetypeinfo_op;
+extern const struct seq_operations pagetypeinfo_op;
static int pagetypeinfo_open(struct inode *inode, struct file *file)
{
return seq_open(file, &pagetypeinfo_op);
@@ -249,7 +249,7 @@
.release = seq_release,
};
-extern struct seq_operations zoneinfo_op;
+extern const struct seq_operations zoneinfo_op;
static int zoneinfo_open(struct inode *inode, struct file *file)
{
return seq_open(file, &zoneinfo_op);
@@ -274,7 +274,7 @@
return proc_calc_metrics(page, start, off, count, eof, len);
}
-extern struct seq_operations cpuinfo_op;
+extern const struct seq_operations cpuinfo_op;
static int cpuinfo_open(struct inode *inode, struct file *file)
{
return seq_open(file, &cpuinfo_op);
@@ -327,7 +327,7 @@
/* Nothing to do */
}
-static struct seq_operations devinfo_ops = {
+static const struct seq_operations devinfo_ops = {
.start = devinfo_start,
.next = devinfo_next,
.stop = devinfo_stop,
@@ -346,7 +346,7 @@
.release = seq_release,
};
-extern struct seq_operations vmstat_op;
+extern const struct seq_operations vmstat_op;
static int vmstat_open(struct inode *inode, struct file *file)
{
return seq_open(file, &vmstat_op);
@@ -377,7 +377,7 @@
#endif
#ifdef CONFIG_BLOCK
-extern struct seq_operations partitions_op;
+extern const struct seq_operations partitions_op;
static int partitions_open(struct inode *inode, struct file *file)
{
return seq_open(file, &partitions_op);
@@ -389,7 +389,7 @@
.release = seq_release,
};
-extern struct seq_operations diskstats_op;
+extern const struct seq_operations diskstats_op;
static int diskstats_open(struct inode *inode, struct file *file)
{
return seq_open(file, &diskstats_op);
@@ -403,7 +403,7 @@
#endif
#ifdef CONFIG_MODULES
-extern struct seq_operations modules_op;
+extern const struct seq_operations modules_op;
static int modules_open(struct inode *inode, struct file *file)
{
return seq_open(file, &modules_op);
@@ -430,7 +430,7 @@
};
#ifdef CONFIG_DEBUG_SLAB_LEAK
-extern struct seq_operations slabstats_op;
+extern const struct seq_operations slabstats_op;
static int slabstats_open(struct inode *inode, struct file *file)
{
unsigned long *n = kzalloc(PAGE_SIZE, GFP_KERNEL);
@@ -604,7 +604,7 @@
}
-static struct seq_operations int_seq_ops = {
+static const struct seq_operations int_seq_ops = {
.start = int_seq_start,
.next = int_seq_next,
.stop = int_seq_stop,
diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c
index 4823c96..14e9b5a 100644
--- a/fs/proc/proc_net.c
+++ b/fs/proc/proc_net.c
@@ -67,12 +67,7 @@
struct proc_dir_entry *proc_net_fops_create(struct net *net,
const char *name, mode_t mode, const struct file_operations *fops)
{
- struct proc_dir_entry *res;
-
- res = create_proc_entry(name, mode, net->proc_net);
- if (res)
- res->proc_fops = fops;
- return res;
+ return proc_create(name, mode, net->proc_net, fops);
}
EXPORT_SYMBOL_GPL(proc_net_fops_create);
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 4e57fcf..b9cb23c 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -9,7 +9,7 @@
static struct dentry_operations proc_sys_dentry_operations;
static const struct file_operations proc_sys_file_operations;
-static struct inode_operations proc_sys_inode_operations;
+static const struct inode_operations proc_sys_inode_operations;
static void proc_sys_refresh_inode(struct inode *inode, struct ctl_table *table)
{
@@ -446,7 +446,7 @@
.readdir = proc_sys_readdir,
};
-static struct inode_operations proc_sys_inode_operations = {
+static const struct inode_operations proc_sys_inode_operations = {
.lookup = proc_sys_lookup,
.permission = proc_sys_permission,
.setattr = proc_sys_setattr,
diff --git a/fs/proc/proc_tty.c b/fs/proc/proc_tty.c
index 2284622..49816e0 100644
--- a/fs/proc/proc_tty.c
+++ b/fs/proc/proc_tty.c
@@ -15,9 +15,6 @@
#include <linux/seq_file.h>
#include <linux/bitops.h>
-static int tty_ldiscs_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-
/*
* The /proc/tty directory inodes...
*/
@@ -120,7 +117,7 @@
mutex_unlock(&tty_mutex);
}
-static struct seq_operations tty_drivers_op = {
+static const struct seq_operations tty_drivers_op = {
.start = t_start,
.next = t_next,
.stop = t_stop,
diff --git a/fs/proc/root.c b/fs/proc/root.c
index 81f99e6..ef0fb57 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -232,6 +232,7 @@
EXPORT_SYMBOL(proc_symlink);
EXPORT_SYMBOL(proc_mkdir);
EXPORT_SYMBOL(create_proc_entry);
+EXPORT_SYMBOL(proc_create);
EXPORT_SYMBOL(remove_proc_entry);
EXPORT_SYMBOL(proc_root);
EXPORT_SYMBOL(proc_root_fs);
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 38338ed..ae4d3f2 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -9,13 +9,14 @@
#include <linux/mempolicy.h>
#include <linux/swap.h>
#include <linux/swapops.h>
+#include <linux/seq_file.h>
#include <asm/elf.h>
#include <asm/uaccess.h>
#include <asm/tlbflush.h>
#include "internal.h"
-char *task_mem(struct mm_struct *mm, char *buffer)
+void task_mem(struct seq_file *m, struct mm_struct *mm)
{
unsigned long data, text, lib;
unsigned long hiwater_vm, total_vm, hiwater_rss, total_rss;
@@ -37,7 +38,7 @@
data = mm->total_vm - mm->shared_vm - mm->stack_vm;
text = (PAGE_ALIGN(mm->end_code) - (mm->start_code & PAGE_MASK)) >> 10;
lib = (mm->exec_vm << (PAGE_SHIFT-10)) - text;
- buffer += sprintf(buffer,
+ seq_printf(m,
"VmPeak:\t%8lu kB\n"
"VmSize:\t%8lu kB\n"
"VmLck:\t%8lu kB\n"
@@ -56,7 +57,6 @@
data << (PAGE_SHIFT-10),
mm->stack_vm << (PAGE_SHIFT-10), text, lib,
(PTRS_PER_PTE*sizeof(pte_t)*mm->nr_ptes) >> 10);
- return buffer;
}
unsigned long task_vsize(struct mm_struct *mm)
@@ -216,7 +216,7 @@
}
static int do_maps_open(struct inode *inode, struct file *file,
- struct seq_operations *ops)
+ const struct seq_operations *ops)
{
struct proc_maps_private *priv;
int ret = -ENOMEM;
@@ -299,7 +299,7 @@
return 0;
}
-static struct seq_operations proc_pid_maps_op = {
+static const struct seq_operations proc_pid_maps_op = {
.start = m_start,
.next = m_next,
.stop = m_stop,
@@ -434,7 +434,7 @@
return ret;
}
-static struct seq_operations proc_pid_smaps_op = {
+static const struct seq_operations proc_pid_smaps_op = {
.start = m_start,
.next = m_next,
.stop = m_stop,
@@ -734,7 +734,7 @@
return show_numa_map(m, v);
}
-static struct seq_operations proc_pid_numa_maps_op = {
+static const struct seq_operations proc_pid_numa_maps_op = {
.start = m_start,
.next = m_next,
.stop = m_stop,
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 1932c2c..abfc6f5 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -12,7 +12,7 @@
* each process that owns it. Non-shared memory is counted
* accurately.
*/
-char *task_mem(struct mm_struct *mm, char *buffer)
+void task_mem(struct seq_file *m, struct mm_struct *mm)
{
struct vm_list_struct *vml;
unsigned long bytes = 0, sbytes = 0, slack = 0;
@@ -58,14 +58,13 @@
bytes += kobjsize(current); /* includes kernel stack */
- buffer += sprintf(buffer,
+ seq_printf(m,
"Mem:\t%8lu bytes\n"
"Slack:\t%8lu bytes\n"
"Shared:\t%8lu bytes\n",
bytes, slack, sbytes);
up_read(&mm->mmap_sem);
- return buffer;
}
unsigned long task_vsize(struct mm_struct *mm)
@@ -199,7 +198,7 @@
return vml ? vml->next : NULL;
}
-static struct seq_operations proc_pid_maps_ops = {
+static const struct seq_operations proc_pid_maps_ops = {
.start = m_start,
.next = m_next,
.stop = m_stop,
diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index 523e109..9ac0f5e 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -10,7 +10,6 @@
#include <linux/mm.h>
#include <linux/proc_fs.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/elf.h>
#include <linux/elfcore.h>
#include <linux/highmem.h>
diff --git a/fs/read_write.c b/fs/read_write.c
index 1c177f2..49a9871 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -366,7 +366,6 @@
return ret;
}
-EXPORT_UNUSED_SYMBOL_GPL(sys_read); /* to be deleted for 2.6.25 */
asmlinkage ssize_t sys_write(unsigned int fd, const char __user * buf, size_t count)
{
diff --git a/fs/reiserfs/procfs.c b/fs/reiserfs/procfs.c
index 0011446..8f86c52 100644
--- a/fs/reiserfs/procfs.c
+++ b/fs/reiserfs/procfs.c
@@ -444,7 +444,7 @@
return show(m, v);
}
-static struct seq_operations r_ops = {
+static const struct seq_operations r_ops = {
.start = r_start,
.next = r_next,
.stop = r_stop,
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 5cd85fe..6033f0c 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -617,6 +617,7 @@
.unlockfs = reiserfs_unlockfs,
.statfs = reiserfs_statfs,
.remount_fs = reiserfs_remount,
+ .show_options = generic_show_options,
#ifdef CONFIG_QUOTA
.quota_read = reiserfs_quota_read,
.quota_write = reiserfs_quota_write,
@@ -1138,6 +1139,7 @@
unsigned long safe_mask = 0;
unsigned int commit_max_age = (unsigned int)-1;
struct reiserfs_journal *journal = SB_JOURNAL(s);
+ char *new_opts = kstrdup(arg, GFP_KERNEL);
int err;
#ifdef CONFIG_QUOTA
int i;
@@ -1153,7 +1155,8 @@
REISERFS_SB(s)->s_qf_names[i] = NULL;
}
#endif
- return -EINVAL;
+ err = -EINVAL;
+ goto out_err;
}
handle_attrs(s);
@@ -1191,9 +1194,9 @@
}
if (blocks) {
- int rc = reiserfs_resize(s, blocks);
- if (rc != 0)
- return rc;
+ err = reiserfs_resize(s, blocks);
+ if (err != 0)
+ goto out_err;
}
if (*mount_flags & MS_RDONLY) {
@@ -1201,16 +1204,16 @@
/* remount read-only */
if (s->s_flags & MS_RDONLY)
/* it is read-only already */
- return 0;
+ goto out_ok;
/* try to remount file system with read-only permissions */
if (sb_umount_state(rs) == REISERFS_VALID_FS
|| REISERFS_SB(s)->s_mount_state != REISERFS_VALID_FS) {
- return 0;
+ goto out_ok;
}
err = journal_begin(&th, s, 10);
if (err)
- return err;
+ goto out_err;
/* Mounting a rw partition read-only. */
reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1);
@@ -1220,11 +1223,13 @@
/* remount read-write */
if (!(s->s_flags & MS_RDONLY)) {
reiserfs_xattr_init(s, *mount_flags);
- return 0; /* We are read-write already */
+ goto out_ok; /* We are read-write already */
}
- if (reiserfs_is_journal_aborted(journal))
- return journal->j_errno;
+ if (reiserfs_is_journal_aborted(journal)) {
+ err = journal->j_errno;
+ goto out_err;
+ }
handle_data_mode(s, mount_options);
handle_barrier_mode(s, mount_options);
@@ -1232,7 +1237,7 @@
s->s_flags &= ~MS_RDONLY; /* now it is safe to call journal_begin */
err = journal_begin(&th, s, 10);
if (err)
- return err;
+ goto out_err;
/* Mount a partition which is read-only, read-write */
reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1);
@@ -1247,7 +1252,7 @@
SB_JOURNAL(s)->j_must_wait = 1;
err = journal_end(&th, s, 10);
if (err)
- return err;
+ goto out_err;
s->s_dirt = 0;
if (!(*mount_flags & MS_RDONLY)) {
@@ -1255,7 +1260,14 @@
reiserfs_xattr_init(s, *mount_flags);
}
+out_ok:
+ kfree(s->s_options);
+ s->s_options = new_opts;
return 0;
+
+out_err:
+ kfree(new_opts);
+ return err;
}
static int read_super_block(struct super_block *s, int offset)
@@ -1559,6 +1571,8 @@
struct reiserfs_sb_info *sbi;
int errval = -EINVAL;
+ save_mount_options(s, data);
+
sbi = kzalloc(sizeof(struct reiserfs_sb_info), GFP_KERNEL);
if (!sbi) {
errval = -ENOMEM;
diff --git a/fs/splice.c b/fs/splice.c
index 4ee49e8..14e2262 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1179,6 +1179,9 @@
{
int partial;
+ if (!access_ok(VERIFY_READ, src, n))
+ return -EFAULT;
+
pagefault_disable();
partial = __copy_from_user_inatomic(dst, src, n);
pagefault_enable();
@@ -1387,6 +1390,11 @@
break;
}
+ if (unlikely(!access_ok(VERIFY_WRITE, base, len))) {
+ error = -EFAULT;
+ break;
+ }
+
sd.len = 0;
sd.total_len = len;
sd.flags = flags;
diff --git a/fs/super.c b/fs/super.c
index ceaf2e3..88811f6 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -105,6 +105,7 @@
{
security_sb_free(s);
kfree(s->s_subtype);
+ kfree(s->s_options);
kfree(s);
}
@@ -603,6 +604,7 @@
mark_files_ro(sb);
else if (!fs_may_remount_ro(sb))
return -EBUSY;
+ DQUOT_OFF(sb);
}
if (sb->s_op->remount_fs) {
diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c
index ab26176..d721a1a 100644
--- a/fs/udf/balloc.c
+++ b/fs/udf/balloc.c
@@ -28,15 +28,16 @@
#include "udf_i.h"
#include "udf_sb.h"
-#define udf_clear_bit(nr,addr) ext2_clear_bit(nr,addr)
-#define udf_set_bit(nr,addr) ext2_set_bit(nr,addr)
+#define udf_clear_bit(nr, addr) ext2_clear_bit(nr, addr)
+#define udf_set_bit(nr, addr) ext2_set_bit(nr, addr)
#define udf_test_bit(nr, addr) ext2_test_bit(nr, addr)
#define udf_find_first_one_bit(addr, size) find_first_one_bit(addr, size)
-#define udf_find_next_one_bit(addr, size, offset) find_next_one_bit(addr, size, offset)
+#define udf_find_next_one_bit(addr, size, offset) \
+ find_next_one_bit(addr, size, offset)
#define leBPL_to_cpup(x) leNUM_to_cpup(BITS_PER_LONG, x)
-#define leNUM_to_cpup(x,y) xleNUM_to_cpup(x,y)
-#define xleNUM_to_cpup(x,y) (le ## x ## _to_cpup(y))
+#define leNUM_to_cpup(x, y) xleNUM_to_cpup(x, y)
+#define xleNUM_to_cpup(x, y) (le ## x ## _to_cpup(y))
#define uintBPL_t uint(BITS_PER_LONG)
#define uint(x) xuint(x)
#define xuint(x) __le ## x
@@ -62,7 +63,8 @@
result += BITS_PER_LONG;
}
while (size & ~(BITS_PER_LONG - 1)) {
- if ((tmp = leBPL_to_cpup(p++)))
+ tmp = leBPL_to_cpup(p++);
+ if (tmp)
goto found_middle;
result += BITS_PER_LONG;
size -= BITS_PER_LONG;
@@ -88,12 +90,12 @@
kernel_lb_addr loc;
loc.logicalBlockNum = bitmap->s_extPosition;
- loc.partitionReferenceNum = UDF_SB_PARTITION(sb);
+ loc.partitionReferenceNum = UDF_SB(sb)->s_partition;
bh = udf_tread(sb, udf_get_lb_pblock(sb, loc, block));
- if (!bh) {
+ if (!bh)
retval = -EIO;
- }
+
bitmap->s_block_bitmap[bitmap_nr] = bh;
return retval;
}
@@ -138,6 +140,20 @@
return slot;
}
+static bool udf_add_free_space(struct udf_sb_info *sbi,
+ u16 partition, u32 cnt)
+{
+ struct logicalVolIntegrityDesc *lvid;
+
+ if (sbi->s_lvid_bh)
+ return false;
+
+ lvid = (struct logicalVolIntegrityDesc *)sbi->s_lvid_bh->b_data;
+ lvid->freeSpaceTable[partition] = cpu_to_le32(le32_to_cpu(
+ lvid->freeSpaceTable[partition]) + cnt);
+ return true;
+}
+
static void udf_bitmap_free_blocks(struct super_block *sb,
struct inode *inode,
struct udf_bitmap *bitmap,
@@ -155,57 +171,58 @@
mutex_lock(&sbi->s_alloc_mutex);
if (bloc.logicalBlockNum < 0 ||
- (bloc.logicalBlockNum + count) > UDF_SB_PARTLEN(sb, bloc.partitionReferenceNum)) {
+ (bloc.logicalBlockNum + count) >
+ sbi->s_partmaps[bloc.partitionReferenceNum].s_partition_len) {
udf_debug("%d < %d || %d + %d > %d\n",
bloc.logicalBlockNum, 0, bloc.logicalBlockNum, count,
- UDF_SB_PARTLEN(sb, bloc.partitionReferenceNum));
+ sbi->s_partmaps[bloc.partitionReferenceNum].
+ s_partition_len);
goto error_return;
}
- block = bloc.logicalBlockNum + offset + (sizeof(struct spaceBitmapDesc) << 3);
+ block = bloc.logicalBlockNum + offset +
+ (sizeof(struct spaceBitmapDesc) << 3);
-do_more:
- overflow = 0;
- block_group = block >> (sb->s_blocksize_bits + 3);
- bit = block % (sb->s_blocksize << 3);
+ do {
+ overflow = 0;
+ block_group = block >> (sb->s_blocksize_bits + 3);
+ bit = block % (sb->s_blocksize << 3);
- /*
- * Check to see if we are freeing blocks across a group boundary.
- */
- if (bit + count > (sb->s_blocksize << 3)) {
- overflow = bit + count - (sb->s_blocksize << 3);
- count -= overflow;
- }
- bitmap_nr = load_block_bitmap(sb, bitmap, block_group);
- if (bitmap_nr < 0)
- goto error_return;
+ /*
+ * Check to see if we are freeing blocks across a group boundary.
+ */
+ if (bit + count > (sb->s_blocksize << 3)) {
+ overflow = bit + count - (sb->s_blocksize << 3);
+ count -= overflow;
+ }
+ bitmap_nr = load_block_bitmap(sb, bitmap, block_group);
+ if (bitmap_nr < 0)
+ goto error_return;
- bh = bitmap->s_block_bitmap[bitmap_nr];
- for (i = 0; i < count; i++) {
- if (udf_set_bit(bit + i, bh->b_data)) {
- udf_debug("bit %ld already set\n", bit + i);
- udf_debug("byte=%2x\n", ((char *)bh->b_data)[(bit + i) >> 3]);
- } else {
- if (inode)
- DQUOT_FREE_BLOCK(inode, 1);
- if (UDF_SB_LVIDBH(sb)) {
- UDF_SB_LVID(sb)->freeSpaceTable[UDF_SB_PARTITION(sb)] =
- cpu_to_le32(le32_to_cpu(UDF_SB_LVID(sb)->freeSpaceTable[UDF_SB_PARTITION(sb)]) + 1);
+ bh = bitmap->s_block_bitmap[bitmap_nr];
+ for (i = 0; i < count; i++) {
+ if (udf_set_bit(bit + i, bh->b_data)) {
+ udf_debug("bit %ld already set\n", bit + i);
+ udf_debug("byte=%2x\n",
+ ((char *)bh->b_data)[(bit + i) >> 3]);
+ } else {
+ if (inode)
+ DQUOT_FREE_BLOCK(inode, 1);
+ udf_add_free_space(sbi, sbi->s_partition, 1);
}
}
- }
- mark_buffer_dirty(bh);
- if (overflow) {
- block += count;
- count = overflow;
- goto do_more;
- }
+ mark_buffer_dirty(bh);
+ if (overflow) {
+ block += count;
+ count = overflow;
+ }
+ } while (overflow);
+
error_return:
sb->s_dirt = 1;
- if (UDF_SB_LVIDBH(sb))
- mark_buffer_dirty(UDF_SB_LVIDBH(sb));
+ if (sbi->s_lvid_bh)
+ mark_buffer_dirty(sbi->s_lvid_bh);
mutex_unlock(&sbi->s_alloc_mutex);
- return;
}
static int udf_bitmap_prealloc_blocks(struct super_block *sb,
@@ -219,53 +236,50 @@
int bit, block, block_group, group_start;
int nr_groups, bitmap_nr;
struct buffer_head *bh;
+ __u32 part_len;
mutex_lock(&sbi->s_alloc_mutex);
- if (first_block < 0 || first_block >= UDF_SB_PARTLEN(sb, partition))
+ part_len = sbi->s_partmaps[partition].s_partition_len;
+ if (first_block < 0 || first_block >= part_len)
goto out;
- if (first_block + block_count > UDF_SB_PARTLEN(sb, partition))
- block_count = UDF_SB_PARTLEN(sb, partition) - first_block;
+ if (first_block + block_count > part_len)
+ block_count = part_len - first_block;
-repeat:
- nr_groups = (UDF_SB_PARTLEN(sb, partition) +
- (sizeof(struct spaceBitmapDesc) << 3) +
- (sb->s_blocksize * 8) - 1) / (sb->s_blocksize * 8);
- block = first_block + (sizeof(struct spaceBitmapDesc) << 3);
- block_group = block >> (sb->s_blocksize_bits + 3);
- group_start = block_group ? 0 : sizeof(struct spaceBitmapDesc);
+ do {
+ nr_groups = udf_compute_nr_groups(sb, partition);
+ block = first_block + (sizeof(struct spaceBitmapDesc) << 3);
+ block_group = block >> (sb->s_blocksize_bits + 3);
+ group_start = block_group ? 0 : sizeof(struct spaceBitmapDesc);
- bitmap_nr = load_block_bitmap(sb, bitmap, block_group);
- if (bitmap_nr < 0)
- goto out;
- bh = bitmap->s_block_bitmap[bitmap_nr];
-
- bit = block % (sb->s_blocksize << 3);
-
- while (bit < (sb->s_blocksize << 3) && block_count > 0) {
- if (!udf_test_bit(bit, bh->b_data)) {
+ bitmap_nr = load_block_bitmap(sb, bitmap, block_group);
+ if (bitmap_nr < 0)
goto out;
- } else if (DQUOT_PREALLOC_BLOCK(inode, 1)) {
- goto out;
- } else if (!udf_clear_bit(bit, bh->b_data)) {
- udf_debug("bit already cleared for block %d\n", bit);
- DQUOT_FREE_BLOCK(inode, 1);
- goto out;
+ bh = bitmap->s_block_bitmap[bitmap_nr];
+
+ bit = block % (sb->s_blocksize << 3);
+
+ while (bit < (sb->s_blocksize << 3) && block_count > 0) {
+ if (!udf_test_bit(bit, bh->b_data))
+ goto out;
+ else if (DQUOT_PREALLOC_BLOCK(inode, 1))
+ goto out;
+ else if (!udf_clear_bit(bit, bh->b_data)) {
+ udf_debug("bit already cleared for block %d\n", bit);
+ DQUOT_FREE_BLOCK(inode, 1);
+ goto out;
+ }
+ block_count--;
+ alloc_count++;
+ bit++;
+ block++;
}
- block_count--;
- alloc_count++;
- bit++;
- block++;
- }
- mark_buffer_dirty(bh);
- if (block_count > 0)
- goto repeat;
+ mark_buffer_dirty(bh);
+ } while (block_count > 0);
+
out:
- if (UDF_SB_LVIDBH(sb)) {
- UDF_SB_LVID(sb)->freeSpaceTable[partition] =
- cpu_to_le32(le32_to_cpu(UDF_SB_LVID(sb)->freeSpaceTable[partition]) - alloc_count);
- mark_buffer_dirty(UDF_SB_LVIDBH(sb));
- }
+ if (udf_add_free_space(sbi, partition, -alloc_count))
+ mark_buffer_dirty(sbi->s_lvid_bh);
sb->s_dirt = 1;
mutex_unlock(&sbi->s_alloc_mutex);
return alloc_count;
@@ -287,7 +301,7 @@
mutex_lock(&sbi->s_alloc_mutex);
repeat:
- if (goal < 0 || goal >= UDF_SB_PARTLEN(sb, partition))
+ if (goal < 0 || goal >= sbi->s_partmaps[partition].s_partition_len)
goal = 0;
nr_groups = bitmap->s_nr_groups;
@@ -312,14 +326,16 @@
if (bit < end_goal)
goto got_block;
- ptr = memscan((char *)bh->b_data + (bit >> 3), 0xFF, sb->s_blocksize - ((bit + 7) >> 3));
+ ptr = memscan((char *)bh->b_data + (bit >> 3), 0xFF,
+ sb->s_blocksize - ((bit + 7) >> 3));
newbit = (ptr - ((char *)bh->b_data)) << 3;
if (newbit < sb->s_blocksize << 3) {
bit = newbit;
goto search_back;
}
- newbit = udf_find_next_one_bit(bh->b_data, sb->s_blocksize << 3, bit);
+ newbit = udf_find_next_one_bit(bh->b_data,
+ sb->s_blocksize << 3, bit);
if (newbit < sb->s_blocksize << 3) {
bit = newbit;
goto got_block;
@@ -358,15 +374,20 @@
if (bit < sb->s_blocksize << 3)
goto search_back;
else
- bit = udf_find_next_one_bit(bh->b_data, sb->s_blocksize << 3, group_start << 3);
+ bit = udf_find_next_one_bit(bh->b_data, sb->s_blocksize << 3,
+ group_start << 3);
if (bit >= sb->s_blocksize << 3) {
mutex_unlock(&sbi->s_alloc_mutex);
return 0;
}
search_back:
- for (i = 0; i < 7 && bit > (group_start << 3) && udf_test_bit(bit - 1, bh->b_data); i++, bit--)
- ; /* empty loop */
+ i = 0;
+ while (i < 7 && bit > (group_start << 3) &&
+ udf_test_bit(bit - 1, bh->b_data)) {
+ ++i;
+ --bit;
+ }
got_block:
@@ -389,11 +410,8 @@
mark_buffer_dirty(bh);
- if (UDF_SB_LVIDBH(sb)) {
- UDF_SB_LVID(sb)->freeSpaceTable[partition] =
- cpu_to_le32(le32_to_cpu(UDF_SB_LVID(sb)->freeSpaceTable[partition]) - 1);
- mark_buffer_dirty(UDF_SB_LVIDBH(sb));
- }
+ if (udf_add_free_space(sbi, partition, -1))
+ mark_buffer_dirty(sbi->s_lvid_bh);
sb->s_dirt = 1;
mutex_unlock(&sbi->s_alloc_mutex);
*err = 0;
@@ -418,56 +436,70 @@
struct extent_position oepos, epos;
int8_t etype;
int i;
+ struct udf_inode_info *iinfo;
mutex_lock(&sbi->s_alloc_mutex);
if (bloc.logicalBlockNum < 0 ||
- (bloc.logicalBlockNum + count) > UDF_SB_PARTLEN(sb, bloc.partitionReferenceNum)) {
+ (bloc.logicalBlockNum + count) >
+ sbi->s_partmaps[bloc.partitionReferenceNum].s_partition_len) {
udf_debug("%d < %d || %d + %d > %d\n",
bloc.logicalBlockNum, 0, bloc.logicalBlockNum, count,
- UDF_SB_PARTLEN(sb, bloc.partitionReferenceNum));
+ sbi->s_partmaps[bloc.partitionReferenceNum].
+ s_partition_len);
goto error_return;
}
- /* We do this up front - There are some error conditions that could occure,
- but.. oh well */
+ iinfo = UDF_I(table);
+ /* We do this up front - There are some error conditions that
+ could occure, but.. oh well */
if (inode)
DQUOT_FREE_BLOCK(inode, count);
- if (UDF_SB_LVIDBH(sb)) {
- UDF_SB_LVID(sb)->freeSpaceTable[UDF_SB_PARTITION(sb)] =
- cpu_to_le32(le32_to_cpu(UDF_SB_LVID(sb)->freeSpaceTable[UDF_SB_PARTITION(sb)]) + count);
- mark_buffer_dirty(UDF_SB_LVIDBH(sb));
- }
+ if (udf_add_free_space(sbi, sbi->s_partition, count))
+ mark_buffer_dirty(sbi->s_lvid_bh);
start = bloc.logicalBlockNum + offset;
end = bloc.logicalBlockNum + offset + count - 1;
epos.offset = oepos.offset = sizeof(struct unallocSpaceEntry);
elen = 0;
- epos.block = oepos.block = UDF_I_LOCATION(table);
+ epos.block = oepos.block = iinfo->i_location;
epos.bh = oepos.bh = NULL;
while (count &&
(etype = udf_next_aext(table, &epos, &eloc, &elen, 1)) != -1) {
- if (((eloc.logicalBlockNum + (elen >> sb->s_blocksize_bits)) == start)) {
- if ((0x3FFFFFFF - elen) < (count << sb->s_blocksize_bits)) {
- count -= ((0x3FFFFFFF - elen) >> sb->s_blocksize_bits);
- start += ((0x3FFFFFFF - elen) >> sb->s_blocksize_bits);
- elen = (etype << 30) | (0x40000000 - sb->s_blocksize);
+ if (((eloc.logicalBlockNum +
+ (elen >> sb->s_blocksize_bits)) == start)) {
+ if ((0x3FFFFFFF - elen) <
+ (count << sb->s_blocksize_bits)) {
+ uint32_t tmp = ((0x3FFFFFFF - elen) >>
+ sb->s_blocksize_bits);
+ count -= tmp;
+ start += tmp;
+ elen = (etype << 30) |
+ (0x40000000 - sb->s_blocksize);
} else {
- elen = (etype << 30) | (elen + (count << sb->s_blocksize_bits));
+ elen = (etype << 30) |
+ (elen +
+ (count << sb->s_blocksize_bits));
start += count;
count = 0;
}
udf_write_aext(table, &oepos, eloc, elen, 1);
} else if (eloc.logicalBlockNum == (end + 1)) {
- if ((0x3FFFFFFF - elen) < (count << sb->s_blocksize_bits)) {
- count -= ((0x3FFFFFFF - elen) >> sb->s_blocksize_bits);
- end -= ((0x3FFFFFFF - elen) >> sb->s_blocksize_bits);
- eloc.logicalBlockNum -= ((0x3FFFFFFF - elen) >> sb->s_blocksize_bits);
- elen = (etype << 30) | (0x40000000 - sb->s_blocksize);
+ if ((0x3FFFFFFF - elen) <
+ (count << sb->s_blocksize_bits)) {
+ uint32_t tmp = ((0x3FFFFFFF - elen) >>
+ sb->s_blocksize_bits);
+ count -= tmp;
+ end -= tmp;
+ eloc.logicalBlockNum -= tmp;
+ elen = (etype << 30) |
+ (0x40000000 - sb->s_blocksize);
} else {
eloc.logicalBlockNum = start;
- elen = (etype << 30) | (elen + (count << sb->s_blocksize_bits));
+ elen = (etype << 30) |
+ (elen +
+ (count << sb->s_blocksize_bits));
end -= count;
count = 0;
}
@@ -488,9 +520,9 @@
if (count) {
/*
- * NOTE: we CANNOT use udf_add_aext here, as it can try to allocate
- * a new block, and since we hold the super block lock already
- * very bad things would happen :)
+ * NOTE: we CANNOT use udf_add_aext here, as it can try to
+ * allocate a new block, and since we hold the super block
+ * lock already very bad things would happen :)
*
* We copy the behavior of udf_add_aext, but instead of
* trying to allocate a new block close to the existing one,
@@ -509,11 +541,11 @@
elen = EXT_RECORDED_ALLOCATED |
(count << sb->s_blocksize_bits);
- if (UDF_I_ALLOCTYPE(table) == ICBTAG_FLAG_AD_SHORT) {
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
adsize = sizeof(short_ad);
- } else if (UDF_I_ALLOCTYPE(table) == ICBTAG_FLAG_AD_LONG) {
+ else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
adsize = sizeof(long_ad);
- } else {
+ else {
brelse(oepos.bh);
brelse(epos.bh);
goto error_return;
@@ -531,56 +563,70 @@
eloc.logicalBlockNum++;
elen -= sb->s_blocksize;
- if (!(epos.bh = udf_tread(sb, udf_get_lb_pblock(sb, epos.block, 0)))) {
+ epos.bh = udf_tread(sb,
+ udf_get_lb_pblock(sb, epos.block, 0));
+ if (!epos.bh) {
brelse(oepos.bh);
goto error_return;
}
aed = (struct allocExtDesc *)(epos.bh->b_data);
- aed->previousAllocExtLocation = cpu_to_le32(oepos.block.logicalBlockNum);
+ aed->previousAllocExtLocation =
+ cpu_to_le32(oepos.block.logicalBlockNum);
if (epos.offset + adsize > sb->s_blocksize) {
loffset = epos.offset;
aed->lengthAllocDescs = cpu_to_le32(adsize);
- sptr = UDF_I_DATA(table) + epos.offset - adsize;
- dptr = epos.bh->b_data + sizeof(struct allocExtDesc);
+ sptr = iinfo->i_ext.i_data + epos.offset
+ - adsize;
+ dptr = epos.bh->b_data +
+ sizeof(struct allocExtDesc);
memcpy(dptr, sptr, adsize);
- epos.offset = sizeof(struct allocExtDesc) + adsize;
+ epos.offset = sizeof(struct allocExtDesc) +
+ adsize;
} else {
loffset = epos.offset + adsize;
aed->lengthAllocDescs = cpu_to_le32(0);
if (oepos.bh) {
sptr = oepos.bh->b_data + epos.offset;
- aed = (struct allocExtDesc *)oepos.bh->b_data;
+ aed = (struct allocExtDesc *)
+ oepos.bh->b_data;
aed->lengthAllocDescs =
- cpu_to_le32(le32_to_cpu(aed->lengthAllocDescs) + adsize);
+ cpu_to_le32(le32_to_cpu(
+ aed->lengthAllocDescs) +
+ adsize);
} else {
- sptr = UDF_I_DATA(table) + epos.offset;
- UDF_I_LENALLOC(table) += adsize;
+ sptr = iinfo->i_ext.i_data +
+ epos.offset;
+ iinfo->i_lenAlloc += adsize;
mark_inode_dirty(table);
}
epos.offset = sizeof(struct allocExtDesc);
}
- if (UDF_SB_UDFREV(sb) >= 0x0200)
- udf_new_tag(epos.bh->b_data, TAG_IDENT_AED, 3, 1,
- epos.block.logicalBlockNum, sizeof(tag));
+ if (sbi->s_udfrev >= 0x0200)
+ udf_new_tag(epos.bh->b_data, TAG_IDENT_AED,
+ 3, 1, epos.block.logicalBlockNum,
+ sizeof(tag));
else
- udf_new_tag(epos.bh->b_data, TAG_IDENT_AED, 2, 1,
- epos.block.logicalBlockNum, sizeof(tag));
+ udf_new_tag(epos.bh->b_data, TAG_IDENT_AED,
+ 2, 1, epos.block.logicalBlockNum,
+ sizeof(tag));
- switch (UDF_I_ALLOCTYPE(table)) {
- case ICBTAG_FLAG_AD_SHORT:
- sad = (short_ad *)sptr;
- sad->extLength = cpu_to_le32(
- EXT_NEXT_EXTENT_ALLOCDECS |
- sb->s_blocksize);
- sad->extPosition = cpu_to_le32(epos.block.logicalBlockNum);
- break;
- case ICBTAG_FLAG_AD_LONG:
- lad = (long_ad *)sptr;
- lad->extLength = cpu_to_le32(
- EXT_NEXT_EXTENT_ALLOCDECS |
- sb->s_blocksize);
- lad->extLocation = cpu_to_lelb(epos.block);
- break;
+ switch (iinfo->i_alloc_type) {
+ case ICBTAG_FLAG_AD_SHORT:
+ sad = (short_ad *)sptr;
+ sad->extLength = cpu_to_le32(
+ EXT_NEXT_EXTENT_ALLOCDECS |
+ sb->s_blocksize);
+ sad->extPosition =
+ cpu_to_le32(epos.block.logicalBlockNum);
+ break;
+ case ICBTAG_FLAG_AD_LONG:
+ lad = (long_ad *)sptr;
+ lad->extLength = cpu_to_le32(
+ EXT_NEXT_EXTENT_ALLOCDECS |
+ sb->s_blocksize);
+ lad->extLocation =
+ cpu_to_lelb(epos.block);
+ break;
}
if (oepos.bh) {
udf_update_tag(oepos.bh->b_data, loffset);
@@ -590,16 +636,18 @@
}
}
- if (elen) { /* It's possible that stealing the block emptied the extent */
+ /* It's possible that stealing the block emptied the extent */
+ if (elen) {
udf_write_aext(table, &epos, eloc, elen, 1);
if (!epos.bh) {
- UDF_I_LENALLOC(table) += adsize;
+ iinfo->i_lenAlloc += adsize;
mark_inode_dirty(table);
} else {
aed = (struct allocExtDesc *)epos.bh->b_data;
aed->lengthAllocDescs =
- cpu_to_le32(le32_to_cpu(aed->lengthAllocDescs) + adsize);
+ cpu_to_le32(le32_to_cpu(
+ aed->lengthAllocDescs) + adsize);
udf_update_tag(epos.bh->b_data, epos.offset);
mark_buffer_dirty(epos.bh);
}
@@ -626,20 +674,23 @@
kernel_lb_addr eloc;
struct extent_position epos;
int8_t etype = -1;
+ struct udf_inode_info *iinfo;
- if (first_block < 0 || first_block >= UDF_SB_PARTLEN(sb, partition))
+ if (first_block < 0 ||
+ first_block >= sbi->s_partmaps[partition].s_partition_len)
return 0;
- if (UDF_I_ALLOCTYPE(table) == ICBTAG_FLAG_AD_SHORT)
+ iinfo = UDF_I(table);
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
adsize = sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(table) == ICBTAG_FLAG_AD_LONG)
+ else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
adsize = sizeof(long_ad);
else
return 0;
mutex_lock(&sbi->s_alloc_mutex);
epos.offset = sizeof(struct unallocSpaceEntry);
- epos.block = UDF_I_LOCATION(table);
+ epos.block = iinfo->i_location;
epos.bh = NULL;
eloc.logicalBlockNum = 0xFFFFFFFF;
@@ -654,26 +705,26 @@
epos.offset -= adsize;
alloc_count = (elen >> sb->s_blocksize_bits);
- if (inode && DQUOT_PREALLOC_BLOCK(inode, alloc_count > block_count ? block_count : alloc_count)) {
+ if (inode && DQUOT_PREALLOC_BLOCK(inode,
+ alloc_count > block_count ? block_count : alloc_count))
alloc_count = 0;
- } else if (alloc_count > block_count) {
+ else if (alloc_count > block_count) {
alloc_count = block_count;
eloc.logicalBlockNum += alloc_count;
elen -= (alloc_count << sb->s_blocksize_bits);
- udf_write_aext(table, &epos, eloc, (etype << 30) | elen, 1);
- } else {
- udf_delete_aext(table, epos, eloc, (etype << 30) | elen);
- }
+ udf_write_aext(table, &epos, eloc,
+ (etype << 30) | elen, 1);
+ } else
+ udf_delete_aext(table, epos, eloc,
+ (etype << 30) | elen);
} else {
alloc_count = 0;
}
brelse(epos.bh);
- if (alloc_count && UDF_SB_LVIDBH(sb)) {
- UDF_SB_LVID(sb)->freeSpaceTable[partition] =
- cpu_to_le32(le32_to_cpu(UDF_SB_LVID(sb)->freeSpaceTable[partition]) - alloc_count);
- mark_buffer_dirty(UDF_SB_LVIDBH(sb));
+ if (alloc_count && udf_add_free_space(sbi, partition, -alloc_count)) {
+ mark_buffer_dirty(sbi->s_lvid_bh);
sb->s_dirt = 1;
}
mutex_unlock(&sbi->s_alloc_mutex);
@@ -692,33 +743,35 @@
kernel_lb_addr eloc, uninitialized_var(goal_eloc);
struct extent_position epos, goal_epos;
int8_t etype;
+ struct udf_inode_info *iinfo = UDF_I(table);
*err = -ENOSPC;
- if (UDF_I_ALLOCTYPE(table) == ICBTAG_FLAG_AD_SHORT)
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
adsize = sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(table) == ICBTAG_FLAG_AD_LONG)
+ else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
adsize = sizeof(long_ad);
else
return newblock;
mutex_lock(&sbi->s_alloc_mutex);
- if (goal < 0 || goal >= UDF_SB_PARTLEN(sb, partition))
+ if (goal < 0 || goal >= sbi->s_partmaps[partition].s_partition_len)
goal = 0;
- /* We search for the closest matching block to goal. If we find a exact hit,
- we stop. Otherwise we keep going till we run out of extents.
- We store the buffer_head, bloc, and extoffset of the current closest
- match and use that when we are done.
+ /* We search for the closest matching block to goal. If we find
+ a exact hit, we stop. Otherwise we keep going till we run out
+ of extents. We store the buffer_head, bloc, and extoffset
+ of the current closest match and use that when we are done.
*/
epos.offset = sizeof(struct unallocSpaceEntry);
- epos.block = UDF_I_LOCATION(table);
+ epos.block = iinfo->i_location;
epos.bh = goal_epos.bh = NULL;
while (spread &&
(etype = udf_next_aext(table, &epos, &eloc, &elen, 1)) != -1) {
if (goal >= eloc.logicalBlockNum) {
- if (goal < eloc.logicalBlockNum + (elen >> sb->s_blocksize_bits))
+ if (goal < eloc.logicalBlockNum +
+ (elen >> sb->s_blocksize_bits))
nspread = 0;
else
nspread = goal - eloc.logicalBlockNum -
@@ -771,11 +824,8 @@
udf_delete_aext(table, goal_epos, goal_eloc, goal_elen);
brelse(goal_epos.bh);
- if (UDF_SB_LVIDBH(sb)) {
- UDF_SB_LVID(sb)->freeSpaceTable[partition] =
- cpu_to_le32(le32_to_cpu(UDF_SB_LVID(sb)->freeSpaceTable[partition]) - 1);
- mark_buffer_dirty(UDF_SB_LVIDBH(sb));
- }
+ if (udf_add_free_space(sbi, partition, -1))
+ mark_buffer_dirty(sbi->s_lvid_bh);
sb->s_dirt = 1;
mutex_unlock(&sbi->s_alloc_mutex);
@@ -789,22 +839,23 @@
uint32_t count)
{
uint16_t partition = bloc.partitionReferenceNum;
+ struct udf_part_map *map = &UDF_SB(sb)->s_partmaps[partition];
- if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_UNALLOC_BITMAP) {
+ if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_BITMAP) {
return udf_bitmap_free_blocks(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_uspace.s_bitmap,
+ map->s_uspace.s_bitmap,
bloc, offset, count);
- } else if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_UNALLOC_TABLE) {
+ } else if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_TABLE) {
return udf_table_free_blocks(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_uspace.s_table,
+ map->s_uspace.s_table,
bloc, offset, count);
- } else if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_FREED_BITMAP) {
+ } else if (map->s_partition_flags & UDF_PART_FLAG_FREED_BITMAP) {
return udf_bitmap_free_blocks(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_fspace.s_bitmap,
+ map->s_fspace.s_bitmap,
bloc, offset, count);
- } else if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_FREED_TABLE) {
+ } else if (map->s_partition_flags & UDF_PART_FLAG_FREED_TABLE) {
return udf_table_free_blocks(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_fspace.s_table,
+ map->s_fspace.s_table,
bloc, offset, count);
} else {
return;
@@ -816,51 +867,55 @@
uint16_t partition, uint32_t first_block,
uint32_t block_count)
{
- if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_UNALLOC_BITMAP) {
+ struct udf_part_map *map = &UDF_SB(sb)->s_partmaps[partition];
+
+ if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_BITMAP)
return udf_bitmap_prealloc_blocks(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_uspace.s_bitmap,
- partition, first_block, block_count);
- } else if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_UNALLOC_TABLE) {
+ map->s_uspace.s_bitmap,
+ partition, first_block,
+ block_count);
+ else if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_TABLE)
return udf_table_prealloc_blocks(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_uspace.s_table,
- partition, first_block, block_count);
- } else if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_FREED_BITMAP) {
+ map->s_uspace.s_table,
+ partition, first_block,
+ block_count);
+ else if (map->s_partition_flags & UDF_PART_FLAG_FREED_BITMAP)
return udf_bitmap_prealloc_blocks(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_fspace.s_bitmap,
- partition, first_block, block_count);
- } else if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_FREED_TABLE) {
+ map->s_fspace.s_bitmap,
+ partition, first_block,
+ block_count);
+ else if (map->s_partition_flags & UDF_PART_FLAG_FREED_TABLE)
return udf_table_prealloc_blocks(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_fspace.s_table,
- partition, first_block, block_count);
- } else {
+ map->s_fspace.s_table,
+ partition, first_block,
+ block_count);
+ else
return 0;
- }
}
inline int udf_new_block(struct super_block *sb,
struct inode *inode,
uint16_t partition, uint32_t goal, int *err)
{
- int ret;
+ struct udf_part_map *map = &UDF_SB(sb)->s_partmaps[partition];
- if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_UNALLOC_BITMAP) {
- ret = udf_bitmap_new_block(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_uspace.s_bitmap,
- partition, goal, err);
- return ret;
- } else if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_UNALLOC_TABLE) {
- return udf_table_new_block(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_uspace.s_table,
- partition, goal, err);
- } else if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_FREED_BITMAP) {
+ if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_BITMAP)
return udf_bitmap_new_block(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_fspace.s_bitmap,
- partition, goal, err);
- } else if (UDF_SB_PARTFLAGS(sb, partition) & UDF_PART_FLAG_FREED_TABLE) {
- return udf_table_new_block(sb, inode,
- UDF_SB_PARTMAPS(sb)[partition].s_fspace.s_table,
+ map->s_uspace.s_bitmap,
partition, goal, err);
- } else {
+ else if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_TABLE)
+ return udf_table_new_block(sb, inode,
+ map->s_uspace.s_table,
+ partition, goal, err);
+ else if (map->s_partition_flags & UDF_PART_FLAG_FREED_BITMAP)
+ return udf_bitmap_new_block(sb, inode,
+ map->s_fspace.s_bitmap,
+ partition, goal, err);
+ else if (map->s_partition_flags & UDF_PART_FLAG_FREED_TABLE)
+ return udf_table_new_block(sb, inode,
+ map->s_fspace.s_table,
+ partition, goal, err);
+ else {
*err = -EIO;
return 0;
}
diff --git a/fs/udf/crc.c b/fs/udf/crc.c
index 85aaee5..b166129 100644
--- a/fs/udf/crc.c
+++ b/fs/udf/crc.c
@@ -79,7 +79,7 @@
* July 21, 1997 - Andrew E. Mileski
* Adapted from OSTA-UDF(tm) 1.50 standard.
*/
-uint16_t udf_crc(uint8_t * data, uint32_t size, uint16_t crc)
+uint16_t udf_crc(uint8_t *data, uint32_t size, uint16_t crc)
{
while (size--)
crc = crc_table[(crc >> 8 ^ *(data++)) & 0xffU] ^ (crc << 8);
diff --git a/fs/udf/dir.c b/fs/udf/dir.c
index 9e3b9f9..4b44e23 100644
--- a/fs/udf/dir.c
+++ b/fs/udf/dir.c
@@ -36,68 +36,8 @@
#include "udf_i.h"
#include "udf_sb.h"
-/* Prototypes for file operations */
-static int udf_readdir(struct file *, void *, filldir_t);
-static int do_udf_readdir(struct inode *, struct file *, filldir_t, void *);
-
-/* readdir and lookup functions */
-
-const struct file_operations udf_dir_operations = {
- .read = generic_read_dir,
- .readdir = udf_readdir,
- .ioctl = udf_ioctl,
- .fsync = udf_fsync_file,
-};
-
-/*
- * udf_readdir
- *
- * PURPOSE
- * Read a directory entry.
- *
- * DESCRIPTION
- * Optional - sys_getdents() will return -ENOTDIR if this routine is not
- * available.
- *
- * Refer to sys_getdents() in fs/readdir.c
- * sys_getdents() -> .
- *
- * PRE-CONDITIONS
- * filp Pointer to directory file.
- * buf Pointer to directory entry buffer.
- * filldir Pointer to filldir function.
- *
- * POST-CONDITIONS
- * <return> >=0 on success.
- *
- * HISTORY
- * July 1, 1997 - Andrew E. Mileski
- * Written, tested, and released.
- */
-
-int udf_readdir(struct file *filp, void *dirent, filldir_t filldir)
-{
- struct inode *dir = filp->f_path.dentry->d_inode;
- int result;
-
- lock_kernel();
-
- if (filp->f_pos == 0) {
- if (filldir(dirent, ".", 1, filp->f_pos, dir->i_ino, DT_DIR) < 0) {
- unlock_kernel();
- return 0;
- }
- filp->f_pos++;
- }
-
- result = do_udf_readdir(dir, filp, filldir, dirent);
- unlock_kernel();
- return result;
-}
-
-static int
-do_udf_readdir(struct inode *dir, struct file *filp, filldir_t filldir,
- void *dirent)
+static int do_udf_readdir(struct inode *dir, struct file *filp,
+ filldir_t filldir, void *dirent)
{
struct udf_fileident_bh fibh;
struct fileIdentDesc *fi = NULL;
@@ -117,6 +57,7 @@
int i, num;
unsigned int dt_type;
struct extent_position epos = { NULL, 0, {0, 0} };
+ struct udf_inode_info *iinfo;
if (nf_pos >= size)
return 0;
@@ -125,15 +66,17 @@
nf_pos = (udf_ext0_offset(dir) >> 2);
fibh.soffset = fibh.eoffset = (nf_pos & ((dir->i_sb->s_blocksize - 1) >> 2)) << 2;
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB) {
+ iinfo = UDF_I(dir);
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
fibh.sbh = fibh.ebh = NULL;
} else if (inode_bmap(dir, nf_pos >> (dir->i_sb->s_blocksize_bits - 2),
&epos, &eloc, &elen, &offset) == (EXT_RECORDED_ALLOCATED >> 30)) {
block = udf_get_lb_pblock(dir->i_sb, eloc, offset);
if ((++offset << dir->i_sb->s_blocksize_bits) < elen) {
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_SHORT)
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
epos.offset -= sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_LONG)
+ else if (iinfo->i_alloc_type ==
+ ICBTAG_FLAG_AD_LONG)
epos.offset -= sizeof(long_ad);
} else {
offset = 0;
@@ -244,3 +187,57 @@
return 0;
}
+
+/*
+ * udf_readdir
+ *
+ * PURPOSE
+ * Read a directory entry.
+ *
+ * DESCRIPTION
+ * Optional - sys_getdents() will return -ENOTDIR if this routine is not
+ * available.
+ *
+ * Refer to sys_getdents() in fs/readdir.c
+ * sys_getdents() -> .
+ *
+ * PRE-CONDITIONS
+ * filp Pointer to directory file.
+ * buf Pointer to directory entry buffer.
+ * filldir Pointer to filldir function.
+ *
+ * POST-CONDITIONS
+ * <return> >=0 on success.
+ *
+ * HISTORY
+ * July 1, 1997 - Andrew E. Mileski
+ * Written, tested, and released.
+ */
+
+static int udf_readdir(struct file *filp, void *dirent, filldir_t filldir)
+{
+ struct inode *dir = filp->f_path.dentry->d_inode;
+ int result;
+
+ lock_kernel();
+
+ if (filp->f_pos == 0) {
+ if (filldir(dirent, ".", 1, filp->f_pos, dir->i_ino, DT_DIR) < 0) {
+ unlock_kernel();
+ return 0;
+ }
+ filp->f_pos++;
+ }
+
+ result = do_udf_readdir(dir, filp, filldir, dirent);
+ unlock_kernel();
+ return result;
+}
+
+/* readdir and lookup functions */
+const struct file_operations udf_dir_operations = {
+ .read = generic_read_dir,
+ .readdir = udf_readdir,
+ .ioctl = udf_ioctl,
+ .fsync = udf_fsync_file,
+};
diff --git a/fs/udf/directory.c b/fs/udf/directory.c
index ff8c08f..2820f8f 100644
--- a/fs/udf/directory.c
+++ b/fs/udf/directory.c
@@ -19,7 +19,7 @@
#include <linux/buffer_head.h>
#if 0
-static uint8_t *udf_filead_read(struct inode *dir, uint8_t * tmpad,
+static uint8_t *udf_filead_read(struct inode *dir, uint8_t *tmpad,
uint8_t ad_size, kernel_lb_addr fe_loc,
int *pos, int *offset, struct buffer_head **bh,
int *error)
@@ -45,7 +45,8 @@
block = udf_get_lb_pblock(dir->i_sb, fe_loc, ++*pos);
if (!block)
return NULL;
- if (!(*bh = udf_tread(dir->i_sb, block)))
+ *bh = udf_tread(dir->i_sb, block);
+ if (!*bh)
return NULL;
} else if (*offset > dir->i_sb->s_blocksize) {
ad = tmpad;
@@ -57,10 +58,12 @@
block = udf_get_lb_pblock(dir->i_sb, fe_loc, ++*pos);
if (!block)
return NULL;
- if (!((*bh) = udf_tread(dir->i_sb, block)))
+ (*bh) = udf_tread(dir->i_sb, block);
+ if (!*bh)
return NULL;
- memcpy((uint8_t *)ad + remainder, (*bh)->b_data, ad_size - remainder);
+ memcpy((uint8_t *)ad + remainder, (*bh)->b_data,
+ ad_size - remainder);
*offset = ad_size - remainder;
}
@@ -68,29 +71,31 @@
}
#endif
-struct fileIdentDesc *udf_fileident_read(struct inode *dir, loff_t * nf_pos,
+struct fileIdentDesc *udf_fileident_read(struct inode *dir, loff_t *nf_pos,
struct udf_fileident_bh *fibh,
struct fileIdentDesc *cfi,
struct extent_position *epos,
- kernel_lb_addr * eloc, uint32_t * elen,
- sector_t * offset)
+ kernel_lb_addr *eloc, uint32_t *elen,
+ sector_t *offset)
{
struct fileIdentDesc *fi;
int i, num, block;
struct buffer_head *tmp, *bha[16];
+ struct udf_inode_info *iinfo = UDF_I(dir);
fibh->soffset = fibh->eoffset;
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB) {
- fi = udf_get_fileident(UDF_I_DATA(dir) -
- (UDF_I_EFE(dir) ?
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
+ fi = udf_get_fileident(iinfo->i_ext.i_data -
+ (iinfo->i_efe ?
sizeof(struct extendedFileEntry) :
sizeof(struct fileEntry)),
- dir->i_sb->s_blocksize, &(fibh->eoffset));
+ dir->i_sb->s_blocksize,
+ &(fibh->eoffset));
if (!fi)
return NULL;
- *nf_pos += ((fibh->eoffset - fibh->soffset) >> 2);
+ *nf_pos += fibh->eoffset - fibh->soffset;
memcpy((uint8_t *)cfi, (uint8_t *)fi,
sizeof(struct fileIdentDesc));
@@ -100,6 +105,7 @@
if (fibh->eoffset == dir->i_sb->s_blocksize) {
int lextoffset = epos->offset;
+ unsigned char blocksize_bits = dir->i_sb->s_blocksize_bits;
if (udf_next_aext(dir, epos, eloc, elen, 1) !=
(EXT_RECORDED_ALLOCATED >> 30))
@@ -109,24 +115,27 @@
(*offset)++;
- if ((*offset << dir->i_sb->s_blocksize_bits) >= *elen)
+ if ((*offset << blocksize_bits) >= *elen)
*offset = 0;
else
epos->offset = lextoffset;
brelse(fibh->sbh);
- if (!(fibh->sbh = fibh->ebh = udf_tread(dir->i_sb, block)))
+ fibh->sbh = fibh->ebh = udf_tread(dir->i_sb, block);
+ if (!fibh->sbh)
return NULL;
fibh->soffset = fibh->eoffset = 0;
- if (!(*offset & ((16 >> (dir->i_sb->s_blocksize_bits - 9)) - 1))) {
- i = 16 >> (dir->i_sb->s_blocksize_bits - 9);
- if (i + *offset > (*elen >> dir->i_sb->s_blocksize_bits))
- i = (*elen >> dir->i_sb->s_blocksize_bits)-*offset;
+ if (!(*offset & ((16 >> (blocksize_bits - 9)) - 1))) {
+ i = 16 >> (blocksize_bits - 9);
+ if (i + *offset > (*elen >> blocksize_bits))
+ i = (*elen >> blocksize_bits)-*offset;
for (num = 0; i > 0; i--) {
- block = udf_get_lb_pblock(dir->i_sb, *eloc, *offset + i);
+ block = udf_get_lb_pblock(dir->i_sb, *eloc,
+ *offset + i);
tmp = udf_tgetblk(dir->i_sb, block);
- if (tmp && !buffer_uptodate(tmp) && !buffer_locked(tmp))
+ if (tmp && !buffer_uptodate(tmp) &&
+ !buffer_locked(tmp))
bha[num++] = tmp;
else
brelse(tmp);
@@ -148,7 +157,7 @@
if (!fi)
return NULL;
- *nf_pos += ((fibh->eoffset - fibh->soffset) >> 2);
+ *nf_pos += fibh->eoffset - fibh->soffset;
if (fibh->eoffset <= dir->i_sb->s_blocksize) {
memcpy((uint8_t *)cfi, (uint8_t *)fi,
@@ -172,20 +181,23 @@
fibh->soffset -= dir->i_sb->s_blocksize;
fibh->eoffset -= dir->i_sb->s_blocksize;
- if (!(fibh->ebh = udf_tread(dir->i_sb, block)))
+ fibh->ebh = udf_tread(dir->i_sb, block);
+ if (!fibh->ebh)
return NULL;
if (sizeof(struct fileIdentDesc) > -fibh->soffset) {
int fi_len;
memcpy((uint8_t *)cfi, (uint8_t *)fi, -fibh->soffset);
- memcpy((uint8_t *)cfi - fibh->soffset, fibh->ebh->b_data,
+ memcpy((uint8_t *)cfi - fibh->soffset,
+ fibh->ebh->b_data,
sizeof(struct fileIdentDesc) + fibh->soffset);
- fi_len = (sizeof(struct fileIdentDesc) + cfi->lengthFileIdent +
+ fi_len = (sizeof(struct fileIdentDesc) +
+ cfi->lengthFileIdent +
le16_to_cpu(cfi->lengthOfImpUse) + 3) & ~3;
- *nf_pos += ((fi_len - (fibh->eoffset - fibh->soffset)) >> 2);
+ *nf_pos += fi_len - (fibh->eoffset - fibh->soffset);
fibh->eoffset = fibh->soffset + fi_len;
} else {
memcpy((uint8_t *)cfi, (uint8_t *)fi,
@@ -210,11 +222,10 @@
ptr = buffer;
- if ((*offset > 0) && (*offset < bufsize)) {
+ if ((*offset > 0) && (*offset < bufsize))
ptr += *offset;
- }
fi = (struct fileIdentDesc *)ptr;
- if (le16_to_cpu(fi->descTag.tagIdent) != TAG_IDENT_FID) {
+ if (fi->descTag.tagIdent != cpu_to_le16(TAG_IDENT_FID)) {
udf_debug("0x%x != TAG_IDENT_FID\n",
le16_to_cpu(fi->descTag.tagIdent));
udf_debug("offset: %u sizeof: %lu bufsize: %u\n",
@@ -222,12 +233,11 @@
bufsize);
return NULL;
}
- if ((*offset + sizeof(struct fileIdentDesc)) > bufsize) {
+ if ((*offset + sizeof(struct fileIdentDesc)) > bufsize)
lengthThisIdent = sizeof(struct fileIdentDesc);
- } else {
+ else
lengthThisIdent = sizeof(struct fileIdentDesc) +
fi->lengthFileIdent + le16_to_cpu(fi->lengthOfImpUse);
- }
/* we need to figure padding, too! */
padlen = lengthThisIdent % UDF_NAME_PAD;
@@ -252,17 +262,17 @@
fe = (struct fileEntry *)buffer;
- if (le16_to_cpu(fe->descTag.tagIdent) != TAG_IDENT_FE) {
+ if (fe->descTag.tagIdent != cpu_to_le16(TAG_IDENT_FE)) {
udf_debug("0x%x != TAG_IDENT_FE\n",
le16_to_cpu(fe->descTag.tagIdent));
return NULL;
}
- ptr = (uint8_t *)(fe->extendedAttr) + le32_to_cpu(fe->lengthExtendedAttr);
+ ptr = (uint8_t *)(fe->extendedAttr) +
+ le32_to_cpu(fe->lengthExtendedAttr);
- if ((*offset > 0) && (*offset < le32_to_cpu(fe->lengthAllocDescs))) {
+ if ((*offset > 0) && (*offset < le32_to_cpu(fe->lengthAllocDescs)))
ptr += *offset;
- }
ext = (extent_ad *)ptr;
@@ -271,7 +281,7 @@
}
#endif
-short_ad *udf_get_fileshortad(uint8_t *ptr, int maxoffset, int *offset,
+short_ad *udf_get_fileshortad(uint8_t *ptr, int maxoffset, uint32_t *offset,
int inc)
{
short_ad *sa;
@@ -281,17 +291,20 @@
return NULL;
}
- if ((*offset < 0) || ((*offset + sizeof(short_ad)) > maxoffset))
+ if ((*offset + sizeof(short_ad)) > maxoffset)
return NULL;
- else if ((sa = (short_ad *)ptr)->extLength == 0)
- return NULL;
+ else {
+ sa = (short_ad *)ptr;
+ if (sa->extLength == 0)
+ return NULL;
+ }
if (inc)
*offset += sizeof(short_ad);
return sa;
}
-long_ad *udf_get_filelongad(uint8_t *ptr, int maxoffset, int *offset, int inc)
+long_ad *udf_get_filelongad(uint8_t *ptr, int maxoffset, uint32_t *offset, int inc)
{
long_ad *la;
@@ -300,10 +313,13 @@
return NULL;
}
- if ((*offset < 0) || ((*offset + sizeof(long_ad)) > maxoffset))
+ if ((*offset + sizeof(long_ad)) > maxoffset)
return NULL;
- else if ((la = (long_ad *)ptr)->extLength == 0)
- return NULL;
+ else {
+ la = (long_ad *)ptr;
+ if (la->extLength == 0)
+ return NULL;
+ }
if (inc)
*offset += sizeof(long_ad);
diff --git a/fs/udf/file.c b/fs/udf/file.c
index 7c7a1b3..97c71ae 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -45,12 +45,13 @@
{
struct inode *inode = page->mapping->host;
char *kaddr;
+ struct udf_inode_info *iinfo = UDF_I(inode);
BUG_ON(!PageLocked(page));
kaddr = kmap(page);
memset(kaddr, 0, PAGE_CACHE_SIZE);
- memcpy(kaddr, UDF_I_DATA(inode) + UDF_I_LENEATTR(inode), inode->i_size);
+ memcpy(kaddr, iinfo->i_ext.i_data + iinfo->i_lenEAttr, inode->i_size);
flush_dcache_page(page);
SetPageUptodate(page);
kunmap(page);
@@ -59,15 +60,17 @@
return 0;
}
-static int udf_adinicb_writepage(struct page *page, struct writeback_control *wbc)
+static int udf_adinicb_writepage(struct page *page,
+ struct writeback_control *wbc)
{
struct inode *inode = page->mapping->host;
char *kaddr;
+ struct udf_inode_info *iinfo = UDF_I(inode);
BUG_ON(!PageLocked(page));
kaddr = kmap(page);
- memcpy(UDF_I_DATA(inode) + UDF_I_LENEATTR(inode), kaddr, inode->i_size);
+ memcpy(iinfo->i_ext.i_data + iinfo->i_lenEAttr, kaddr, inode->i_size);
mark_inode_dirty(inode);
SetPageUptodate(page);
kunmap(page);
@@ -84,9 +87,10 @@
struct inode *inode = mapping->host;
unsigned offset = pos & (PAGE_CACHE_SIZE - 1);
char *kaddr;
+ struct udf_inode_info *iinfo = UDF_I(inode);
kaddr = kmap_atomic(page, KM_USER0);
- memcpy(UDF_I_DATA(inode) + UDF_I_LENEATTR(inode) + offset,
+ memcpy(iinfo->i_ext.i_data + iinfo->i_lenEAttr + offset,
kaddr + offset, copied);
kunmap_atomic(kaddr, KM_USER0);
@@ -109,25 +113,27 @@
struct inode *inode = file->f_path.dentry->d_inode;
int err, pos;
size_t count = iocb->ki_left;
+ struct udf_inode_info *iinfo = UDF_I(inode);
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB) {
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
if (file->f_flags & O_APPEND)
pos = inode->i_size;
else
pos = ppos;
- if (inode->i_sb->s_blocksize < (udf_file_entry_alloc_offset(inode) +
+ if (inode->i_sb->s_blocksize <
+ (udf_file_entry_alloc_offset(inode) +
pos + count)) {
udf_expand_file_adinicb(inode, pos + count, &err);
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB) {
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
udf_debug("udf_expand_adinicb: err=%d\n", err);
return err;
}
} else {
if (pos + count > inode->i_size)
- UDF_I_LENALLOC(inode) = pos + count;
+ iinfo->i_lenAlloc = pos + count;
else
- UDF_I_LENALLOC(inode) = inode->i_size;
+ iinfo->i_lenAlloc = inode->i_size;
}
}
@@ -191,23 +197,28 @@
switch (cmd) {
case UDF_GETVOLIDENT:
- return copy_to_user((char __user *)arg,
- UDF_SB_VOLIDENT(inode->i_sb), 32) ? -EFAULT : 0;
+ if (copy_to_user((char __user *)arg,
+ UDF_SB(inode->i_sb)->s_volume_ident, 32))
+ return -EFAULT;
+ else
+ return 0;
case UDF_RELOCATE_BLOCKS:
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
if (get_user(old_block, (long __user *)arg))
return -EFAULT;
- if ((result = udf_relocate_blocks(inode->i_sb,
- old_block, &new_block)) == 0)
+ result = udf_relocate_blocks(inode->i_sb,
+ old_block, &new_block);
+ if (result == 0)
result = put_user(new_block, (long __user *)arg);
return result;
case UDF_GETEASIZE:
- result = put_user(UDF_I_LENEATTR(inode), (int __user *)arg);
+ result = put_user(UDF_I(inode)->i_lenEAttr, (int __user *)arg);
break;
case UDF_GETEABLOCK:
- result = copy_to_user((char __user *)arg, UDF_I_DATA(inode),
- UDF_I_LENEATTR(inode)) ? -EFAULT : 0;
+ result = copy_to_user((char __user *)arg,
+ UDF_I(inode)->i_ext.i_data,
+ UDF_I(inode)->i_lenEAttr) ? -EFAULT : 0;
break;
}
diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c
index 636d8f6..84360315 100644
--- a/fs/udf/ialloc.c
+++ b/fs/udf/ialloc.c
@@ -43,19 +43,21 @@
clear_inode(inode);
mutex_lock(&sbi->s_alloc_mutex);
- if (sbi->s_lvidbh) {
+ if (sbi->s_lvid_bh) {
+ struct logicalVolIntegrityDescImpUse *lvidiu =
+ udf_sb_lvidiu(sbi);
if (S_ISDIR(inode->i_mode))
- UDF_SB_LVIDIU(sb)->numDirs =
- cpu_to_le32(le32_to_cpu(UDF_SB_LVIDIU(sb)->numDirs) - 1);
+ lvidiu->numDirs =
+ cpu_to_le32(le32_to_cpu(lvidiu->numDirs) - 1);
else
- UDF_SB_LVIDIU(sb)->numFiles =
- cpu_to_le32(le32_to_cpu(UDF_SB_LVIDIU(sb)->numFiles) - 1);
+ lvidiu->numFiles =
+ cpu_to_le32(le32_to_cpu(lvidiu->numFiles) - 1);
- mark_buffer_dirty(sbi->s_lvidbh);
+ mark_buffer_dirty(sbi->s_lvid_bh);
}
mutex_unlock(&sbi->s_alloc_mutex);
- udf_free_blocks(sb, NULL, UDF_I_LOCATION(inode), 0, 1);
+ udf_free_blocks(sb, NULL, UDF_I(inode)->i_location, 0, 1);
}
struct inode *udf_new_inode(struct inode *dir, int mode, int *err)
@@ -64,7 +66,9 @@
struct udf_sb_info *sbi = UDF_SB(sb);
struct inode *inode;
int block;
- uint32_t start = UDF_I_LOCATION(dir).logicalBlockNum;
+ uint32_t start = UDF_I(dir)->i_location.logicalBlockNum;
+ struct udf_inode_info *iinfo;
+ struct udf_inode_info *dinfo = UDF_I(dir);
inode = new_inode(sb);
@@ -74,13 +78,15 @@
}
*err = -ENOSPC;
- UDF_I_UNIQUE(inode) = 0;
- UDF_I_LENEXTENTS(inode) = 0;
- UDF_I_NEXT_ALLOC_BLOCK(inode) = 0;
- UDF_I_NEXT_ALLOC_GOAL(inode) = 0;
- UDF_I_STRAT4096(inode) = 0;
+ iinfo = UDF_I(inode);
+ iinfo->i_unique = 0;
+ iinfo->i_lenExtents = 0;
+ iinfo->i_next_alloc_block = 0;
+ iinfo->i_next_alloc_goal = 0;
+ iinfo->i_strat4096 = 0;
- block = udf_new_block(dir->i_sb, NULL, UDF_I_LOCATION(dir).partitionReferenceNum,
+ block = udf_new_block(dir->i_sb, NULL,
+ dinfo->i_location.partitionReferenceNum,
start, err);
if (*err) {
iput(inode);
@@ -88,21 +94,27 @@
}
mutex_lock(&sbi->s_alloc_mutex);
- if (UDF_SB_LVIDBH(sb)) {
+ if (sbi->s_lvid_bh) {
+ struct logicalVolIntegrityDesc *lvid =
+ (struct logicalVolIntegrityDesc *)
+ sbi->s_lvid_bh->b_data;
+ struct logicalVolIntegrityDescImpUse *lvidiu =
+ udf_sb_lvidiu(sbi);
struct logicalVolHeaderDesc *lvhd;
uint64_t uniqueID;
- lvhd = (struct logicalVolHeaderDesc *)(UDF_SB_LVID(sb)->logicalVolContentsUse);
+ lvhd = (struct logicalVolHeaderDesc *)
+ (lvid->logicalVolContentsUse);
if (S_ISDIR(mode))
- UDF_SB_LVIDIU(sb)->numDirs =
- cpu_to_le32(le32_to_cpu(UDF_SB_LVIDIU(sb)->numDirs) + 1);
+ lvidiu->numDirs =
+ cpu_to_le32(le32_to_cpu(lvidiu->numDirs) + 1);
else
- UDF_SB_LVIDIU(sb)->numFiles =
- cpu_to_le32(le32_to_cpu(UDF_SB_LVIDIU(sb)->numFiles) + 1);
- UDF_I_UNIQUE(inode) = uniqueID = le64_to_cpu(lvhd->uniqueID);
+ lvidiu->numFiles =
+ cpu_to_le32(le32_to_cpu(lvidiu->numFiles) + 1);
+ iinfo->i_unique = uniqueID = le64_to_cpu(lvhd->uniqueID);
if (!(++uniqueID & 0x00000000FFFFFFFFUL))
uniqueID += 16;
lvhd->uniqueID = cpu_to_le64(uniqueID);
- mark_buffer_dirty(UDF_SB_LVIDBH(sb));
+ mark_buffer_dirty(sbi->s_lvid_bh);
}
inode->i_mode = mode;
inode->i_uid = current->fsuid;
@@ -114,35 +126,41 @@
inode->i_gid = current->fsgid;
}
- UDF_I_LOCATION(inode).logicalBlockNum = block;
- UDF_I_LOCATION(inode).partitionReferenceNum = UDF_I_LOCATION(dir).partitionReferenceNum;
- inode->i_ino = udf_get_lb_pblock(sb, UDF_I_LOCATION(inode), 0);
+ iinfo->i_location.logicalBlockNum = block;
+ iinfo->i_location.partitionReferenceNum =
+ dinfo->i_location.partitionReferenceNum;
+ inode->i_ino = udf_get_lb_pblock(sb, iinfo->i_location, 0);
inode->i_blocks = 0;
- UDF_I_LENEATTR(inode) = 0;
- UDF_I_LENALLOC(inode) = 0;
- UDF_I_USE(inode) = 0;
+ iinfo->i_lenEAttr = 0;
+ iinfo->i_lenAlloc = 0;
+ iinfo->i_use = 0;
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
- UDF_I_EFE(inode) = 1;
- UDF_UPDATE_UDFREV(inode->i_sb, UDF_VERS_USE_EXTENDED_FE);
- UDF_I_DATA(inode) = kzalloc(inode->i_sb->s_blocksize - sizeof(struct extendedFileEntry), GFP_KERNEL);
+ iinfo->i_efe = 1;
+ if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
+ sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct extendedFileEntry),
+ GFP_KERNEL);
} else {
- UDF_I_EFE(inode) = 0;
- UDF_I_DATA(inode) = kzalloc(inode->i_sb->s_blocksize - sizeof(struct fileEntry), GFP_KERNEL);
+ iinfo->i_efe = 0;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct fileEntry),
+ GFP_KERNEL);
}
- if (!UDF_I_DATA(inode)) {
+ if (!iinfo->i_ext.i_data) {
iput(inode);
*err = -ENOMEM;
mutex_unlock(&sbi->s_alloc_mutex);
return NULL;
}
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
- UDF_I_ALLOCTYPE(inode) = ICBTAG_FLAG_AD_IN_ICB;
+ iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
else if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
- UDF_I_ALLOCTYPE(inode) = ICBTAG_FLAG_AD_SHORT;
+ iinfo->i_alloc_type = ICBTAG_FLAG_AD_SHORT;
else
- UDF_I_ALLOCTYPE(inode) = ICBTAG_FLAG_AD_LONG;
+ iinfo->i_alloc_type = ICBTAG_FLAG_AD_LONG;
inode->i_mtime = inode->i_atime = inode->i_ctime =
- UDF_I_CRTIME(inode) = current_fs_time(inode->i_sb);
+ iinfo->i_crtime = current_fs_time(inode->i_sb);
insert_inode_hash(inode);
mark_inode_dirty(inode);
mutex_unlock(&sbi->s_alloc_mutex);
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 6ff8151..24cfa55 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -19,7 +19,8 @@
* 10/04/98 dgb Added rudimentary directory functions
* 10/07/98 Fully working udf_block_map! It works!
* 11/25/98 bmap altered to better support extents
- * 12/06/98 blf partition support in udf_iget, udf_block_map and udf_read_inode
+ * 12/06/98 blf partition support in udf_iget, udf_block_map
+ * and udf_read_inode
* 12/12/98 rewrote udf_block_map to handle next extents and descs across
* block boundaries (which is not actually allowed)
* 12/20/98 added support for strategy 4096
@@ -51,7 +52,7 @@
static void udf_fill_inode(struct inode *, struct buffer_head *);
static int udf_alloc_i_data(struct inode *inode, size_t size);
static struct buffer_head *inode_getblk(struct inode *, sector_t, int *,
- long *, int *);
+ sector_t *, int *);
static int8_t udf_insert_aext(struct inode *, struct extent_position,
kernel_lb_addr, uint32_t);
static void udf_split_extents(struct inode *, int *, int, int,
@@ -111,16 +112,18 @@
*/
void udf_clear_inode(struct inode *inode)
{
+ struct udf_inode_info *iinfo;
if (!(inode->i_sb->s_flags & MS_RDONLY)) {
lock_kernel();
/* Discard preallocation for directories, symlinks, etc. */
udf_discard_prealloc(inode);
udf_truncate_tail_extent(inode);
unlock_kernel();
- write_inode_now(inode, 1);
+ write_inode_now(inode, 0);
}
- kfree(UDF_I_DATA(inode));
- UDF_I_DATA(inode) = NULL;
+ iinfo = UDF_I(inode);
+ kfree(iinfo->i_ext.i_data);
+ iinfo->i_ext.i_data = NULL;
}
static int udf_writepage(struct page *page, struct writeback_control *wbc)
@@ -160,6 +163,7 @@
{
struct page *page;
char *kaddr;
+ struct udf_inode_info *iinfo = UDF_I(inode);
struct writeback_control udf_wbc = {
.sync_mode = WB_SYNC_NONE,
.nr_to_write = 1,
@@ -168,11 +172,11 @@
/* from now on we have normal address_space methods */
inode->i_data.a_ops = &udf_aops;
- if (!UDF_I_LENALLOC(inode)) {
+ if (!iinfo->i_lenAlloc) {
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
- UDF_I_ALLOCTYPE(inode) = ICBTAG_FLAG_AD_SHORT;
+ iinfo->i_alloc_type = ICBTAG_FLAG_AD_SHORT;
else
- UDF_I_ALLOCTYPE(inode) = ICBTAG_FLAG_AD_LONG;
+ iinfo->i_alloc_type = ICBTAG_FLAG_AD_LONG;
mark_inode_dirty(inode);
return;
}
@@ -182,21 +186,21 @@
if (!PageUptodate(page)) {
kaddr = kmap(page);
- memset(kaddr + UDF_I_LENALLOC(inode), 0x00,
- PAGE_CACHE_SIZE - UDF_I_LENALLOC(inode));
- memcpy(kaddr, UDF_I_DATA(inode) + UDF_I_LENEATTR(inode),
- UDF_I_LENALLOC(inode));
+ memset(kaddr + iinfo->i_lenAlloc, 0x00,
+ PAGE_CACHE_SIZE - iinfo->i_lenAlloc);
+ memcpy(kaddr, iinfo->i_ext.i_data + iinfo->i_lenEAttr,
+ iinfo->i_lenAlloc);
flush_dcache_page(page);
SetPageUptodate(page);
kunmap(page);
}
- memset(UDF_I_DATA(inode) + UDF_I_LENEATTR(inode), 0x00,
- UDF_I_LENALLOC(inode));
- UDF_I_LENALLOC(inode) = 0;
+ memset(iinfo->i_ext.i_data + iinfo->i_lenEAttr, 0x00,
+ iinfo->i_lenAlloc);
+ iinfo->i_lenAlloc = 0;
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
- UDF_I_ALLOCTYPE(inode) = ICBTAG_FLAG_AD_SHORT;
+ iinfo->i_alloc_type = ICBTAG_FLAG_AD_SHORT;
else
- UDF_I_ALLOCTYPE(inode) = ICBTAG_FLAG_AD_LONG;
+ iinfo->i_alloc_type = ICBTAG_FLAG_AD_LONG;
inode->i_data.a_ops->writepage(page, &udf_wbc);
page_cache_release(page);
@@ -215,9 +219,10 @@
struct extent_position epos;
struct udf_fileident_bh sfibh, dfibh;
- loff_t f_pos = udf_ext0_offset(inode) >> 2;
- int size = (udf_ext0_offset(inode) + inode->i_size) >> 2;
+ loff_t f_pos = udf_ext0_offset(inode);
+ int size = udf_ext0_offset(inode) + inode->i_size;
struct fileIdentDesc cfi, *sfi, *dfi;
+ struct udf_inode_info *iinfo = UDF_I(inode);
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
alloctype = ICBTAG_FLAG_AD_SHORT;
@@ -225,19 +230,20 @@
alloctype = ICBTAG_FLAG_AD_LONG;
if (!inode->i_size) {
- UDF_I_ALLOCTYPE(inode) = alloctype;
+ iinfo->i_alloc_type = alloctype;
mark_inode_dirty(inode);
return NULL;
}
/* alloc block, and copy data to it */
*block = udf_new_block(inode->i_sb, inode,
- UDF_I_LOCATION(inode).partitionReferenceNum,
- UDF_I_LOCATION(inode).logicalBlockNum, err);
+ iinfo->i_location.partitionReferenceNum,
+ iinfo->i_location.logicalBlockNum, err);
if (!(*block))
return NULL;
newblock = udf_get_pblock(inode->i_sb, *block,
- UDF_I_LOCATION(inode).partitionReferenceNum, 0);
+ iinfo->i_location.partitionReferenceNum,
+ 0);
if (!newblock)
return NULL;
dbh = udf_tgetblk(inode->i_sb, newblock);
@@ -249,39 +255,44 @@
unlock_buffer(dbh);
mark_buffer_dirty_inode(dbh, inode);
- sfibh.soffset = sfibh.eoffset = (f_pos & ((inode->i_sb->s_blocksize - 1) >> 2)) << 2;
+ sfibh.soffset = sfibh.eoffset =
+ f_pos & (inode->i_sb->s_blocksize - 1);
sfibh.sbh = sfibh.ebh = NULL;
dfibh.soffset = dfibh.eoffset = 0;
dfibh.sbh = dfibh.ebh = dbh;
- while ((f_pos < size)) {
- UDF_I_ALLOCTYPE(inode) = ICBTAG_FLAG_AD_IN_ICB;
- sfi = udf_fileident_read(inode, &f_pos, &sfibh, &cfi, NULL, NULL, NULL, NULL);
+ while (f_pos < size) {
+ iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
+ sfi = udf_fileident_read(inode, &f_pos, &sfibh, &cfi, NULL,
+ NULL, NULL, NULL);
if (!sfi) {
brelse(dbh);
return NULL;
}
- UDF_I_ALLOCTYPE(inode) = alloctype;
+ iinfo->i_alloc_type = alloctype;
sfi->descTag.tagLocation = cpu_to_le32(*block);
dfibh.soffset = dfibh.eoffset;
dfibh.eoffset += (sfibh.eoffset - sfibh.soffset);
dfi = (struct fileIdentDesc *)(dbh->b_data + dfibh.soffset);
if (udf_write_fi(inode, sfi, dfi, &dfibh, sfi->impUse,
- sfi->fileIdent + le16_to_cpu(sfi->lengthOfImpUse))) {
- UDF_I_ALLOCTYPE(inode) = ICBTAG_FLAG_AD_IN_ICB;
+ sfi->fileIdent +
+ le16_to_cpu(sfi->lengthOfImpUse))) {
+ iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
brelse(dbh);
return NULL;
}
}
mark_buffer_dirty_inode(dbh, inode);
- memset(UDF_I_DATA(inode) + UDF_I_LENEATTR(inode), 0, UDF_I_LENALLOC(inode));
- UDF_I_LENALLOC(inode) = 0;
+ memset(iinfo->i_ext.i_data + iinfo->i_lenEAttr, 0,
+ iinfo->i_lenAlloc);
+ iinfo->i_lenAlloc = 0;
eloc.logicalBlockNum = *block;
- eloc.partitionReferenceNum = UDF_I_LOCATION(inode).partitionReferenceNum;
- elen = inode->i_size;
- UDF_I_LENEXTENTS(inode) = elen;
+ eloc.partitionReferenceNum =
+ iinfo->i_location.partitionReferenceNum;
+ elen = inode->i_sb->s_blocksize;
+ iinfo->i_lenExtents = elen;
epos.bh = NULL;
- epos.block = UDF_I_LOCATION(inode);
+ epos.block = iinfo->i_location;
epos.offset = udf_file_entry_alloc_offset(inode);
udf_add_aext(inode, &epos, eloc, elen, 0);
/* UniqueID stuff */
@@ -296,7 +307,8 @@
{
int err, new;
struct buffer_head *bh;
- unsigned long phys;
+ sector_t phys = 0;
+ struct udf_inode_info *iinfo;
if (!create) {
phys = udf_block_map(inode, block);
@@ -314,9 +326,10 @@
if (block < 0)
goto abort_negative;
- if (block == UDF_I_NEXT_ALLOC_BLOCK(inode) + 1) {
- UDF_I_NEXT_ALLOC_BLOCK(inode)++;
- UDF_I_NEXT_ALLOC_GOAL(inode)++;
+ iinfo = UDF_I(inode);
+ if (block == iinfo->i_next_alloc_block + 1) {
+ iinfo->i_next_alloc_block++;
+ iinfo->i_next_alloc_goal++;
}
err = 0;
@@ -366,32 +379,35 @@
/* Extend the file by 'blocks' blocks, return the number of extents added */
int udf_extend_file(struct inode *inode, struct extent_position *last_pos,
- kernel_long_ad * last_ext, sector_t blocks)
+ kernel_long_ad *last_ext, sector_t blocks)
{
sector_t add;
int count = 0, fake = !(last_ext->extLength & UDF_EXTENT_LENGTH_MASK);
struct super_block *sb = inode->i_sb;
kernel_lb_addr prealloc_loc = {};
int prealloc_len = 0;
+ struct udf_inode_info *iinfo;
/* The previous extent is fake and we should not extend by anything
* - there's nothing to do... */
if (!blocks && fake)
return 0;
+ iinfo = UDF_I(inode);
/* Round the last extent up to a multiple of block size */
if (last_ext->extLength & (sb->s_blocksize - 1)) {
last_ext->extLength =
(last_ext->extLength & UDF_EXTENT_FLAG_MASK) |
(((last_ext->extLength & UDF_EXTENT_LENGTH_MASK) +
sb->s_blocksize - 1) & ~(sb->s_blocksize - 1));
- UDF_I_LENEXTENTS(inode) =
- (UDF_I_LENEXTENTS(inode) + sb->s_blocksize - 1) &
+ iinfo->i_lenExtents =
+ (iinfo->i_lenExtents + sb->s_blocksize - 1) &
~(sb->s_blocksize - 1);
}
/* Last extent are just preallocated blocks? */
- if ((last_ext->extLength & UDF_EXTENT_FLAG_MASK) == EXT_NOT_RECORDED_ALLOCATED) {
+ if ((last_ext->extLength & UDF_EXTENT_FLAG_MASK) ==
+ EXT_NOT_RECORDED_ALLOCATED) {
/* Save the extent so that we can reattach it to the end */
prealloc_loc = last_ext->extLocation;
prealloc_len = last_ext->extLength;
@@ -399,13 +415,15 @@
last_ext->extLength = EXT_NOT_RECORDED_NOT_ALLOCATED |
(last_ext->extLength & UDF_EXTENT_LENGTH_MASK);
last_ext->extLocation.logicalBlockNum = 0;
- last_ext->extLocation.partitionReferenceNum = 0;
+ last_ext->extLocation.partitionReferenceNum = 0;
}
/* Can we merge with the previous extent? */
- if ((last_ext->extLength & UDF_EXTENT_FLAG_MASK) == EXT_NOT_RECORDED_NOT_ALLOCATED) {
- add = ((1 << 30) - sb->s_blocksize - (last_ext->extLength &
- UDF_EXTENT_LENGTH_MASK)) >> sb->s_blocksize_bits;
+ if ((last_ext->extLength & UDF_EXTENT_FLAG_MASK) ==
+ EXT_NOT_RECORDED_NOT_ALLOCATED) {
+ add = ((1 << 30) - sb->s_blocksize -
+ (last_ext->extLength & UDF_EXTENT_LENGTH_MASK)) >>
+ sb->s_blocksize_bits;
if (add > blocks)
add = blocks;
blocks -= add;
@@ -416,9 +434,9 @@
udf_add_aext(inode, last_pos, last_ext->extLocation,
last_ext->extLength, 1);
count++;
- } else {
- udf_write_aext(inode, last_pos, last_ext->extLocation, last_ext->extLength, 1);
- }
+ } else
+ udf_write_aext(inode, last_pos, last_ext->extLocation,
+ last_ext->extLength, 1);
/* Managed to do everything necessary? */
if (!blocks)
@@ -426,9 +444,10 @@
/* All further extents will be NOT_RECORDED_NOT_ALLOCATED */
last_ext->extLocation.logicalBlockNum = 0;
- last_ext->extLocation.partitionReferenceNum = 0;
+ last_ext->extLocation.partitionReferenceNum = 0;
add = (1 << (30-sb->s_blocksize_bits)) - 1;
- last_ext->extLength = EXT_NOT_RECORDED_NOT_ALLOCATED | (add << sb->s_blocksize_bits);
+ last_ext->extLength = EXT_NOT_RECORDED_NOT_ALLOCATED |
+ (add << sb->s_blocksize_bits);
/* Create enough extents to cover the whole hole */
while (blocks > add) {
@@ -450,7 +469,8 @@
out:
/* Do we have some preallocated blocks saved? */
if (prealloc_len) {
- if (udf_add_aext(inode, last_pos, prealloc_loc, prealloc_len, 1) == -1)
+ if (udf_add_aext(inode, last_pos, prealloc_loc,
+ prealloc_len, 1) == -1)
return -1;
last_ext->extLocation = prealloc_loc;
last_ext->extLength = prealloc_len;
@@ -458,9 +478,9 @@
}
/* last_pos should point to the last written extent... */
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_SHORT)
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
last_pos->offset -= sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_LONG)
+ else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
last_pos->offset -= sizeof(long_ad);
else
return -1;
@@ -469,7 +489,7 @@
}
static struct buffer_head *inode_getblk(struct inode *inode, sector_t block,
- int *err, long *phys, int *new)
+ int *err, sector_t *phys, int *new)
{
static sector_t last_block;
struct buffer_head *result = NULL;
@@ -483,11 +503,12 @@
uint32_t newblocknum, newblock;
sector_t offset = 0;
int8_t etype;
- int goal = 0, pgoal = UDF_I_LOCATION(inode).logicalBlockNum;
+ struct udf_inode_info *iinfo = UDF_I(inode);
+ int goal = 0, pgoal = iinfo->i_location.logicalBlockNum;
int lastblock = 0;
prev_epos.offset = udf_file_entry_alloc_offset(inode);
- prev_epos.block = UDF_I_LOCATION(inode);
+ prev_epos.block = iinfo->i_location;
prev_epos.bh = NULL;
cur_epos = next_epos = prev_epos;
b_off = (loff_t)block << inode->i_sb->s_blocksize_bits;
@@ -515,7 +536,8 @@
prev_epos.offset = cur_epos.offset;
cur_epos.offset = next_epos.offset;
- if ((etype = udf_next_aext(inode, &next_epos, &eloc, &elen, 1)) == -1)
+ etype = udf_next_aext(inode, &next_epos, &eloc, &elen, 1);
+ if (etype == -1)
break;
c = !c;
@@ -569,9 +591,11 @@
startnum = 1;
} else {
/* Create a fake extent when there's not one */
- memset(&laarr[0].extLocation, 0x00, sizeof(kernel_lb_addr));
+ memset(&laarr[0].extLocation, 0x00,
+ sizeof(kernel_lb_addr));
laarr[0].extLength = EXT_NOT_RECORDED_NOT_ALLOCATED;
- /* Will udf_extend_file() create real extent from a fake one? */
+ /* Will udf_extend_file() create real extent from
+ a fake one? */
startnum = (offset > 0);
}
/* Create extents for the hole between EOF and offset */
@@ -589,14 +613,16 @@
offset = 0;
count += ret;
/* We are not covered by a preallocated extent? */
- if ((laarr[0].extLength & UDF_EXTENT_FLAG_MASK) != EXT_NOT_RECORDED_ALLOCATED) {
+ if ((laarr[0].extLength & UDF_EXTENT_FLAG_MASK) !=
+ EXT_NOT_RECORDED_ALLOCATED) {
/* Is there any real extent? - otherwise we overwrite
* the fake one... */
if (count)
c = !c;
laarr[c].extLength = EXT_NOT_RECORDED_NOT_ALLOCATED |
inode->i_sb->s_blocksize;
- memset(&laarr[c].extLocation, 0x00, sizeof(kernel_lb_addr));
+ memset(&laarr[c].extLocation, 0x00,
+ sizeof(kernel_lb_addr));
count++;
endnum++;
}
@@ -605,7 +631,8 @@
} else {
endnum = startnum = ((count > 2) ? 2 : count);
- /* if the current extent is in position 0, swap it with the previous */
+ /* if the current extent is in position 0,
+ swap it with the previous */
if (!c && count != 1) {
laarr[2] = laarr[0];
laarr[0] = laarr[1];
@@ -613,44 +640,47 @@
c = 1;
}
- /* if the current block is located in an extent, read the next extent */
- if ((etype = udf_next_aext(inode, &next_epos, &eloc, &elen, 0)) != -1) {
+ /* if the current block is located in an extent,
+ read the next extent */
+ etype = udf_next_aext(inode, &next_epos, &eloc, &elen, 0);
+ if (etype != -1) {
laarr[c + 1].extLength = (etype << 30) | elen;
laarr[c + 1].extLocation = eloc;
count++;
startnum++;
endnum++;
- } else {
+ } else
lastblock = 1;
- }
}
/* if the current extent is not recorded but allocated, get the
* block in the extent corresponding to the requested block */
- if ((laarr[c].extLength >> 30) == (EXT_NOT_RECORDED_ALLOCATED >> 30)) {
+ if ((laarr[c].extLength >> 30) == (EXT_NOT_RECORDED_ALLOCATED >> 30))
newblocknum = laarr[c].extLocation.logicalBlockNum + offset;
- } else { /* otherwise, allocate a new block */
- if (UDF_I_NEXT_ALLOC_BLOCK(inode) == block)
- goal = UDF_I_NEXT_ALLOC_GOAL(inode);
+ else { /* otherwise, allocate a new block */
+ if (iinfo->i_next_alloc_block == block)
+ goal = iinfo->i_next_alloc_goal;
if (!goal) {
- if (!(goal = pgoal))
- goal = UDF_I_LOCATION(inode).logicalBlockNum + 1;
+ if (!(goal = pgoal)) /* XXX: what was intended here? */
+ goal = iinfo->i_location.logicalBlockNum + 1;
}
- if (!(newblocknum = udf_new_block(inode->i_sb, inode,
- UDF_I_LOCATION(inode).partitionReferenceNum,
- goal, err))) {
+ newblocknum = udf_new_block(inode->i_sb, inode,
+ iinfo->i_location.partitionReferenceNum,
+ goal, err);
+ if (!newblocknum) {
brelse(prev_epos.bh);
*err = -ENOSPC;
return NULL;
}
- UDF_I_LENEXTENTS(inode) += inode->i_sb->s_blocksize;
+ iinfo->i_lenExtents += inode->i_sb->s_blocksize;
}
- /* if the extent the requsted block is located in contains multiple blocks,
- * split the extent into at most three extents. blocks prior to requested
- * block, requested block, and blocks after requested block */
+ /* if the extent the requsted block is located in contains multiple
+ * blocks, split the extent into at most three extents. blocks prior
+ * to requested block, requested block, and blocks after requested
+ * block */
udf_split_extents(inode, &c, offset, newblocknum, laarr, &endnum);
#ifdef UDF_PREALLOCATE
@@ -668,15 +698,15 @@
brelse(prev_epos.bh);
- if (!(newblock = udf_get_pblock(inode->i_sb, newblocknum,
- UDF_I_LOCATION(inode).partitionReferenceNum, 0))) {
+ newblock = udf_get_pblock(inode->i_sb, newblocknum,
+ iinfo->i_location.partitionReferenceNum, 0);
+ if (!newblock)
return NULL;
- }
*phys = newblock;
*err = 0;
*new = 1;
- UDF_I_NEXT_ALLOC_BLOCK(inode) = block;
- UDF_I_NEXT_ALLOC_GOAL(inode) = newblocknum;
+ iinfo->i_next_alloc_block = block;
+ iinfo->i_next_alloc_goal = newblocknum;
inode->i_ctime = current_fs_time(inode->i_sb);
if (IS_SYNC(inode))
@@ -692,16 +722,20 @@
kernel_long_ad laarr[EXTENT_MERGE_SIZE],
int *endnum)
{
+ unsigned long blocksize = inode->i_sb->s_blocksize;
+ unsigned char blocksize_bits = inode->i_sb->s_blocksize_bits;
+
if ((laarr[*c].extLength >> 30) == (EXT_NOT_RECORDED_ALLOCATED >> 30) ||
- (laarr[*c].extLength >> 30) == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30)) {
+ (laarr[*c].extLength >> 30) ==
+ (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30)) {
int curr = *c;
int blen = ((laarr[curr].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) >> inode->i_sb->s_blocksize_bits;
+ blocksize - 1) >> blocksize_bits;
int8_t etype = (laarr[curr].extLength >> 30);
- if (blen == 1) {
+ if (blen == 1)
;
- } else if (!offset || blen == offset + 1) {
+ else if (!offset || blen == offset + 1) {
laarr[curr + 2] = laarr[curr + 1];
laarr[curr + 1] = laarr[curr];
} else {
@@ -711,15 +745,18 @@
if (offset) {
if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30)) {
- udf_free_blocks(inode->i_sb, inode, laarr[curr].extLocation, 0, offset);
- laarr[curr].extLength = EXT_NOT_RECORDED_NOT_ALLOCATED |
- (offset << inode->i_sb->s_blocksize_bits);
+ udf_free_blocks(inode->i_sb, inode,
+ laarr[curr].extLocation,
+ 0, offset);
+ laarr[curr].extLength =
+ EXT_NOT_RECORDED_NOT_ALLOCATED |
+ (offset << blocksize_bits);
laarr[curr].extLocation.logicalBlockNum = 0;
- laarr[curr].extLocation.partitionReferenceNum = 0;
- } else {
+ laarr[curr].extLocation.
+ partitionReferenceNum = 0;
+ } else
laarr[curr].extLength = (etype << 30) |
- (offset << inode->i_sb->s_blocksize_bits);
- }
+ (offset << blocksize_bits);
curr++;
(*c)++;
(*endnum)++;
@@ -728,16 +765,17 @@
laarr[curr].extLocation.logicalBlockNum = newblocknum;
if (etype == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30))
laarr[curr].extLocation.partitionReferenceNum =
- UDF_I_LOCATION(inode).partitionReferenceNum;
+ UDF_I(inode)->i_location.partitionReferenceNum;
laarr[curr].extLength = EXT_RECORDED_ALLOCATED |
- inode->i_sb->s_blocksize;
+ blocksize;
curr++;
if (blen != offset + 1) {
if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30))
- laarr[curr].extLocation.logicalBlockNum += (offset + 1);
+ laarr[curr].extLocation.logicalBlockNum +=
+ offset + 1;
laarr[curr].extLength = (etype << 30) |
- ((blen - (offset + 1)) << inode->i_sb->s_blocksize_bits);
+ ((blen - (offset + 1)) << blocksize_bits);
curr++;
(*endnum)++;
}
@@ -756,69 +794,86 @@
else
start = c;
} else {
- if ((laarr[c + 1].extLength >> 30) == (EXT_NOT_RECORDED_ALLOCATED >> 30)) {
+ if ((laarr[c + 1].extLength >> 30) ==
+ (EXT_NOT_RECORDED_ALLOCATED >> 30)) {
start = c + 1;
- length = currlength = (((laarr[c + 1].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) >> inode->i_sb->s_blocksize_bits);
- } else {
+ length = currlength =
+ (((laarr[c + 1].extLength &
+ UDF_EXTENT_LENGTH_MASK) +
+ inode->i_sb->s_blocksize - 1) >>
+ inode->i_sb->s_blocksize_bits);
+ } else
start = c;
- }
}
for (i = start + 1; i <= *endnum; i++) {
if (i == *endnum) {
if (lastblock)
length += UDF_DEFAULT_PREALLOC_BLOCKS;
- } else if ((laarr[i].extLength >> 30) == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30)) {
- length += (((laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) >> inode->i_sb->s_blocksize_bits);
- } else {
+ } else if ((laarr[i].extLength >> 30) ==
+ (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30)) {
+ length += (((laarr[i].extLength &
+ UDF_EXTENT_LENGTH_MASK) +
+ inode->i_sb->s_blocksize - 1) >>
+ inode->i_sb->s_blocksize_bits);
+ } else
break;
- }
}
if (length) {
int next = laarr[start].extLocation.logicalBlockNum +
(((laarr[start].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) >> inode->i_sb->s_blocksize_bits);
+ inode->i_sb->s_blocksize - 1) >>
+ inode->i_sb->s_blocksize_bits);
int numalloc = udf_prealloc_blocks(inode->i_sb, inode,
- laarr[start].extLocation.partitionReferenceNum,
- next, (UDF_DEFAULT_PREALLOC_BLOCKS > length ? length :
- UDF_DEFAULT_PREALLOC_BLOCKS) - currlength);
+ laarr[start].extLocation.partitionReferenceNum,
+ next, (UDF_DEFAULT_PREALLOC_BLOCKS > length ?
+ length : UDF_DEFAULT_PREALLOC_BLOCKS) -
+ currlength);
if (numalloc) {
- if (start == (c + 1)) {
+ if (start == (c + 1))
laarr[start].extLength +=
- (numalloc << inode->i_sb->s_blocksize_bits);
- } else {
+ (numalloc <<
+ inode->i_sb->s_blocksize_bits);
+ else {
memmove(&laarr[c + 2], &laarr[c + 1],
sizeof(long_ad) * (*endnum - (c + 1)));
(*endnum)++;
laarr[c + 1].extLocation.logicalBlockNum = next;
laarr[c + 1].extLocation.partitionReferenceNum =
- laarr[c].extLocation.partitionReferenceNum;
- laarr[c + 1].extLength = EXT_NOT_RECORDED_ALLOCATED |
- (numalloc << inode->i_sb->s_blocksize_bits);
+ laarr[c].extLocation.
+ partitionReferenceNum;
+ laarr[c + 1].extLength =
+ EXT_NOT_RECORDED_ALLOCATED |
+ (numalloc <<
+ inode->i_sb->s_blocksize_bits);
start = c + 1;
}
for (i = start + 1; numalloc && i < *endnum; i++) {
- int elen = ((laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) >> inode->i_sb->s_blocksize_bits;
+ int elen = ((laarr[i].extLength &
+ UDF_EXTENT_LENGTH_MASK) +
+ inode->i_sb->s_blocksize - 1) >>
+ inode->i_sb->s_blocksize_bits;
if (elen > numalloc) {
laarr[i].extLength -=
- (numalloc << inode->i_sb->s_blocksize_bits);
+ (numalloc <<
+ inode->i_sb->s_blocksize_bits);
numalloc = 0;
} else {
numalloc -= elen;
if (*endnum > (i + 1))
- memmove(&laarr[i], &laarr[i + 1],
- sizeof(long_ad) * (*endnum - (i + 1)));
+ memmove(&laarr[i],
+ &laarr[i + 1],
+ sizeof(long_ad) *
+ (*endnum - (i + 1)));
i--;
(*endnum)--;
}
}
- UDF_I_LENEXTENTS(inode) += numalloc << inode->i_sb->s_blocksize_bits;
+ UDF_I(inode)->i_lenExtents +=
+ numalloc << inode->i_sb->s_blocksize_bits;
}
}
}
@@ -828,70 +883,97 @@
int *endnum)
{
int i;
+ unsigned long blocksize = inode->i_sb->s_blocksize;
+ unsigned char blocksize_bits = inode->i_sb->s_blocksize_bits;
for (i = 0; i < (*endnum - 1); i++) {
- if ((laarr[i].extLength >> 30) == (laarr[i + 1].extLength >> 30)) {
- if (((laarr[i].extLength >> 30) == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30)) ||
- ((laarr[i + 1].extLocation.logicalBlockNum - laarr[i].extLocation.logicalBlockNum) ==
- (((laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) >> inode->i_sb->s_blocksize_bits))) {
- if (((laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- (laarr[i + 1].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) & ~UDF_EXTENT_LENGTH_MASK) {
- laarr[i + 1].extLength = (laarr[i + 1].extLength -
- (laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- UDF_EXTENT_LENGTH_MASK) & ~(inode->i_sb->s_blocksize - 1);
- laarr[i].extLength = (laarr[i].extLength & UDF_EXTENT_FLAG_MASK) +
- (UDF_EXTENT_LENGTH_MASK + 1) - inode->i_sb->s_blocksize;
- laarr[i + 1].extLocation.logicalBlockNum =
- laarr[i].extLocation.logicalBlockNum +
- ((laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) >>
- inode->i_sb->s_blocksize_bits);
- } else {
- laarr[i].extLength = laarr[i + 1].extLength +
- (((laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) & ~(inode->i_sb->s_blocksize - 1));
- if (*endnum > (i + 2))
- memmove(&laarr[i + 1], &laarr[i + 2],
- sizeof(long_ad) * (*endnum - (i + 2)));
- i--;
- (*endnum)--;
- }
- }
- } else if (((laarr[i].extLength >> 30) == (EXT_NOT_RECORDED_ALLOCATED >> 30)) &&
- ((laarr[i + 1].extLength >> 30) == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30))) {
- udf_free_blocks(inode->i_sb, inode, laarr[i].extLocation, 0,
- ((laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) >> inode->i_sb->s_blocksize_bits);
- laarr[i].extLocation.logicalBlockNum = 0;
- laarr[i].extLocation.partitionReferenceNum = 0;
+ kernel_long_ad *li /*l[i]*/ = &laarr[i];
+ kernel_long_ad *lip1 /*l[i plus 1]*/ = &laarr[i + 1];
- if (((laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- (laarr[i + 1].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) & ~UDF_EXTENT_LENGTH_MASK) {
- laarr[i + 1].extLength = (laarr[i + 1].extLength -
- (laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- UDF_EXTENT_LENGTH_MASK) & ~(inode->i_sb->s_blocksize - 1);
- laarr[i].extLength = (laarr[i].extLength & UDF_EXTENT_FLAG_MASK) +
- (UDF_EXTENT_LENGTH_MASK + 1) - inode->i_sb->s_blocksize;
+ if (((li->extLength >> 30) == (lip1->extLength >> 30)) &&
+ (((li->extLength >> 30) ==
+ (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30)) ||
+ ((lip1->extLocation.logicalBlockNum -
+ li->extLocation.logicalBlockNum) ==
+ (((li->extLength & UDF_EXTENT_LENGTH_MASK) +
+ blocksize - 1) >> blocksize_bits)))) {
+
+ if (((li->extLength & UDF_EXTENT_LENGTH_MASK) +
+ (lip1->extLength & UDF_EXTENT_LENGTH_MASK) +
+ blocksize - 1) & ~UDF_EXTENT_LENGTH_MASK) {
+ lip1->extLength = (lip1->extLength -
+ (li->extLength &
+ UDF_EXTENT_LENGTH_MASK) +
+ UDF_EXTENT_LENGTH_MASK) &
+ ~(blocksize - 1);
+ li->extLength = (li->extLength &
+ UDF_EXTENT_FLAG_MASK) +
+ (UDF_EXTENT_LENGTH_MASK + 1) -
+ blocksize;
+ lip1->extLocation.logicalBlockNum =
+ li->extLocation.logicalBlockNum +
+ ((li->extLength &
+ UDF_EXTENT_LENGTH_MASK) >>
+ blocksize_bits);
} else {
- laarr[i].extLength = laarr[i + 1].extLength +
- (((laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) & ~(inode->i_sb->s_blocksize - 1));
+ li->extLength = lip1->extLength +
+ (((li->extLength &
+ UDF_EXTENT_LENGTH_MASK) +
+ blocksize - 1) & ~(blocksize - 1));
if (*endnum > (i + 2))
memmove(&laarr[i + 1], &laarr[i + 2],
- sizeof(long_ad) * (*endnum - (i + 2)));
+ sizeof(long_ad) *
+ (*endnum - (i + 2)));
i--;
(*endnum)--;
}
- } else if ((laarr[i].extLength >> 30) == (EXT_NOT_RECORDED_ALLOCATED >> 30)) {
- udf_free_blocks(inode->i_sb, inode, laarr[i].extLocation, 0,
- ((laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) +
- inode->i_sb->s_blocksize - 1) >> inode->i_sb->s_blocksize_bits);
- laarr[i].extLocation.logicalBlockNum = 0;
- laarr[i].extLocation.partitionReferenceNum = 0;
- laarr[i].extLength = (laarr[i].extLength & UDF_EXTENT_LENGTH_MASK) |
- EXT_NOT_RECORDED_NOT_ALLOCATED;
+ } else if (((li->extLength >> 30) ==
+ (EXT_NOT_RECORDED_ALLOCATED >> 30)) &&
+ ((lip1->extLength >> 30) ==
+ (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30))) {
+ udf_free_blocks(inode->i_sb, inode, li->extLocation, 0,
+ ((li->extLength &
+ UDF_EXTENT_LENGTH_MASK) +
+ blocksize - 1) >> blocksize_bits);
+ li->extLocation.logicalBlockNum = 0;
+ li->extLocation.partitionReferenceNum = 0;
+
+ if (((li->extLength & UDF_EXTENT_LENGTH_MASK) +
+ (lip1->extLength & UDF_EXTENT_LENGTH_MASK) +
+ blocksize - 1) & ~UDF_EXTENT_LENGTH_MASK) {
+ lip1->extLength = (lip1->extLength -
+ (li->extLength &
+ UDF_EXTENT_LENGTH_MASK) +
+ UDF_EXTENT_LENGTH_MASK) &
+ ~(blocksize - 1);
+ li->extLength = (li->extLength &
+ UDF_EXTENT_FLAG_MASK) +
+ (UDF_EXTENT_LENGTH_MASK + 1) -
+ blocksize;
+ } else {
+ li->extLength = lip1->extLength +
+ (((li->extLength &
+ UDF_EXTENT_LENGTH_MASK) +
+ blocksize - 1) & ~(blocksize - 1));
+ if (*endnum > (i + 2))
+ memmove(&laarr[i + 1], &laarr[i + 2],
+ sizeof(long_ad) *
+ (*endnum - (i + 2)));
+ i--;
+ (*endnum)--;
+ }
+ } else if ((li->extLength >> 30) ==
+ (EXT_NOT_RECORDED_ALLOCATED >> 30)) {
+ udf_free_blocks(inode->i_sb, inode,
+ li->extLocation, 0,
+ ((li->extLength &
+ UDF_EXTENT_LENGTH_MASK) +
+ blocksize - 1) >> blocksize_bits);
+ li->extLocation.logicalBlockNum = 0;
+ li->extLocation.partitionReferenceNum = 0;
+ li->extLength = (li->extLength &
+ UDF_EXTENT_LENGTH_MASK) |
+ EXT_NOT_RECORDED_NOT_ALLOCATED;
}
}
}
@@ -953,6 +1035,7 @@
{
int offset;
int err;
+ struct udf_inode_info *iinfo;
if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
S_ISLNK(inode->i_mode)))
@@ -961,25 +1044,28 @@
return;
lock_kernel();
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB) {
- if (inode->i_sb->s_blocksize < (udf_file_entry_alloc_offset(inode) +
- inode->i_size)) {
+ iinfo = UDF_I(inode);
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
+ if (inode->i_sb->s_blocksize <
+ (udf_file_entry_alloc_offset(inode) +
+ inode->i_size)) {
udf_expand_file_adinicb(inode, inode->i_size, &err);
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB) {
- inode->i_size = UDF_I_LENALLOC(inode);
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
+ inode->i_size = iinfo->i_lenAlloc;
unlock_kernel();
return;
- } else {
+ } else
udf_truncate_extents(inode);
- }
} else {
offset = inode->i_size & (inode->i_sb->s_blocksize - 1);
- memset(UDF_I_DATA(inode) + UDF_I_LENEATTR(inode) + offset, 0x00,
- inode->i_sb->s_blocksize - offset - udf_file_entry_alloc_offset(inode));
- UDF_I_LENALLOC(inode) = inode->i_size;
+ memset(iinfo->i_ext.i_data + iinfo->i_lenEAttr + offset,
+ 0x00, inode->i_sb->s_blocksize -
+ offset - udf_file_entry_alloc_offset(inode));
+ iinfo->i_lenAlloc = inode->i_size;
}
} else {
- block_truncate_page(inode->i_mapping, inode->i_size, udf_get_block);
+ block_truncate_page(inode->i_mapping, inode->i_size,
+ udf_get_block);
udf_truncate_extents(inode);
}
@@ -996,6 +1082,7 @@
struct buffer_head *bh = NULL;
struct fileEntry *fe;
uint16_t ident;
+ struct udf_inode_info *iinfo = UDF_I(inode);
/*
* Set defaults, but the inode is still incomplete!
@@ -1009,7 +1096,7 @@
* i_nlink = 1
* i_op = NULL;
*/
- bh = udf_read_ptagged(inode->i_sb, UDF_I_LOCATION(inode), 0, &ident);
+ bh = udf_read_ptagged(inode->i_sb, iinfo->i_location, 0, &ident);
if (!bh) {
printk(KERN_ERR "udf: udf_read_inode(ino %ld) failed !bh\n",
inode->i_ino);
@@ -1019,8 +1106,8 @@
if (ident != TAG_IDENT_FE && ident != TAG_IDENT_EFE &&
ident != TAG_IDENT_USE) {
- printk(KERN_ERR "udf: udf_read_inode(ino %ld) failed ident=%d\n",
- inode->i_ino, ident);
+ printk(KERN_ERR "udf: udf_read_inode(ino %ld) "
+ "failed ident=%d\n", inode->i_ino, ident);
brelse(bh);
make_bad_inode(inode);
return;
@@ -1028,11 +1115,12 @@
fe = (struct fileEntry *)bh->b_data;
- if (le16_to_cpu(fe->icbTag.strategyType) == 4096) {
+ if (fe->icbTag.strategyType == cpu_to_le16(4096)) {
struct buffer_head *ibh = NULL, *nbh = NULL;
struct indirectEntry *ie;
- ibh = udf_read_ptagged(inode->i_sb, UDF_I_LOCATION(inode), 1, &ident);
+ ibh = udf_read_ptagged(inode->i_sb, iinfo->i_location, 1,
+ &ident);
if (ident == TAG_IDENT_IE) {
if (ibh) {
kernel_lb_addr loc;
@@ -1041,10 +1129,12 @@
loc = lelb_to_cpu(ie->indirectICB.extLocation);
if (ie->indirectICB.extLength &&
- (nbh = udf_read_ptagged(inode->i_sb, loc, 0, &ident))) {
+ (nbh = udf_read_ptagged(inode->i_sb, loc, 0,
+ &ident))) {
if (ident == TAG_IDENT_FE ||
ident == TAG_IDENT_EFE) {
- memcpy(&UDF_I_LOCATION(inode), &loc,
+ memcpy(&iinfo->i_location,
+ &loc,
sizeof(kernel_lb_addr));
brelse(bh);
brelse(ibh);
@@ -1062,7 +1152,7 @@
} else {
brelse(ibh);
}
- } else if (le16_to_cpu(fe->icbTag.strategyType) != 4) {
+ } else if (fe->icbTag.strategyType != cpu_to_le16(4)) {
printk(KERN_ERR "udf: unsupported strategy type: %d\n",
le16_to_cpu(fe->icbTag.strategyType));
brelse(bh);
@@ -1081,51 +1171,63 @@
time_t convtime;
long convtime_usec;
int offset;
+ struct udf_sb_info *sbi = UDF_SB(inode->i_sb);
+ struct udf_inode_info *iinfo = UDF_I(inode);
fe = (struct fileEntry *)bh->b_data;
efe = (struct extendedFileEntry *)bh->b_data;
- if (le16_to_cpu(fe->icbTag.strategyType) == 4)
- UDF_I_STRAT4096(inode) = 0;
- else /* if (le16_to_cpu(fe->icbTag.strategyType) == 4096) */
- UDF_I_STRAT4096(inode) = 1;
+ if (fe->icbTag.strategyType == cpu_to_le16(4))
+ iinfo->i_strat4096 = 0;
+ else /* if (fe->icbTag.strategyType == cpu_to_le16(4096)) */
+ iinfo->i_strat4096 = 1;
- UDF_I_ALLOCTYPE(inode) = le16_to_cpu(fe->icbTag.flags) & ICBTAG_FLAG_AD_MASK;
- UDF_I_UNIQUE(inode) = 0;
- UDF_I_LENEATTR(inode) = 0;
- UDF_I_LENEXTENTS(inode) = 0;
- UDF_I_LENALLOC(inode) = 0;
- UDF_I_NEXT_ALLOC_BLOCK(inode) = 0;
- UDF_I_NEXT_ALLOC_GOAL(inode) = 0;
- if (le16_to_cpu(fe->descTag.tagIdent) == TAG_IDENT_EFE) {
- UDF_I_EFE(inode) = 1;
- UDF_I_USE(inode) = 0;
- if (udf_alloc_i_data(inode, inode->i_sb->s_blocksize - sizeof(struct extendedFileEntry))) {
+ iinfo->i_alloc_type = le16_to_cpu(fe->icbTag.flags) &
+ ICBTAG_FLAG_AD_MASK;
+ iinfo->i_unique = 0;
+ iinfo->i_lenEAttr = 0;
+ iinfo->i_lenExtents = 0;
+ iinfo->i_lenAlloc = 0;
+ iinfo->i_next_alloc_block = 0;
+ iinfo->i_next_alloc_goal = 0;
+ if (fe->descTag.tagIdent == cpu_to_le16(TAG_IDENT_EFE)) {
+ iinfo->i_efe = 1;
+ iinfo->i_use = 0;
+ if (udf_alloc_i_data(inode, inode->i_sb->s_blocksize -
+ sizeof(struct extendedFileEntry))) {
make_bad_inode(inode);
return;
}
- memcpy(UDF_I_DATA(inode), bh->b_data + sizeof(struct extendedFileEntry),
- inode->i_sb->s_blocksize - sizeof(struct extendedFileEntry));
- } else if (le16_to_cpu(fe->descTag.tagIdent) == TAG_IDENT_FE) {
- UDF_I_EFE(inode) = 0;
- UDF_I_USE(inode) = 0;
- if (udf_alloc_i_data(inode, inode->i_sb->s_blocksize - sizeof(struct fileEntry))) {
+ memcpy(iinfo->i_ext.i_data,
+ bh->b_data + sizeof(struct extendedFileEntry),
+ inode->i_sb->s_blocksize -
+ sizeof(struct extendedFileEntry));
+ } else if (fe->descTag.tagIdent == cpu_to_le16(TAG_IDENT_FE)) {
+ iinfo->i_efe = 0;
+ iinfo->i_use = 0;
+ if (udf_alloc_i_data(inode, inode->i_sb->s_blocksize -
+ sizeof(struct fileEntry))) {
make_bad_inode(inode);
return;
}
- memcpy(UDF_I_DATA(inode), bh->b_data + sizeof(struct fileEntry),
+ memcpy(iinfo->i_ext.i_data,
+ bh->b_data + sizeof(struct fileEntry),
inode->i_sb->s_blocksize - sizeof(struct fileEntry));
- } else if (le16_to_cpu(fe->descTag.tagIdent) == TAG_IDENT_USE) {
- UDF_I_EFE(inode) = 0;
- UDF_I_USE(inode) = 1;
- UDF_I_LENALLOC(inode) =
- le32_to_cpu(((struct unallocSpaceEntry *)bh->b_data)->lengthAllocDescs);
- if (udf_alloc_i_data(inode, inode->i_sb->s_blocksize - sizeof(struct unallocSpaceEntry))) {
+ } else if (fe->descTag.tagIdent == cpu_to_le16(TAG_IDENT_USE)) {
+ iinfo->i_efe = 0;
+ iinfo->i_use = 1;
+ iinfo->i_lenAlloc = le32_to_cpu(
+ ((struct unallocSpaceEntry *)bh->b_data)->
+ lengthAllocDescs);
+ if (udf_alloc_i_data(inode, inode->i_sb->s_blocksize -
+ sizeof(struct unallocSpaceEntry))) {
make_bad_inode(inode);
return;
}
- memcpy(UDF_I_DATA(inode), bh->b_data + sizeof(struct unallocSpaceEntry),
- inode->i_sb->s_blocksize - sizeof(struct unallocSpaceEntry));
+ memcpy(iinfo->i_ext.i_data,
+ bh->b_data + sizeof(struct unallocSpaceEntry),
+ inode->i_sb->s_blocksize -
+ sizeof(struct unallocSpaceEntry));
return;
}
@@ -1146,12 +1248,12 @@
inode->i_nlink = 1;
inode->i_size = le64_to_cpu(fe->informationLength);
- UDF_I_LENEXTENTS(inode) = inode->i_size;
+ iinfo->i_lenExtents = inode->i_size;
inode->i_mode = udf_convert_permissions(fe);
inode->i_mode &= ~UDF_SB(inode->i_sb)->s_umask;
- if (UDF_I_EFE(inode) == 0) {
+ if (iinfo->i_efe == 0) {
inode->i_blocks = le64_to_cpu(fe->logicalBlocksRecorded) <<
(inode->i_sb->s_blocksize_bits - 9);
@@ -1160,7 +1262,7 @@
inode->i_atime.tv_sec = convtime;
inode->i_atime.tv_nsec = convtime_usec * 1000;
} else {
- inode->i_atime = UDF_SB_RECORDTIME(inode->i_sb);
+ inode->i_atime = sbi->s_record_time;
}
if (udf_stamp_to_time(&convtime, &convtime_usec,
@@ -1168,7 +1270,7 @@
inode->i_mtime.tv_sec = convtime;
inode->i_mtime.tv_nsec = convtime_usec * 1000;
} else {
- inode->i_mtime = UDF_SB_RECORDTIME(inode->i_sb);
+ inode->i_mtime = sbi->s_record_time;
}
if (udf_stamp_to_time(&convtime, &convtime_usec,
@@ -1176,13 +1278,13 @@
inode->i_ctime.tv_sec = convtime;
inode->i_ctime.tv_nsec = convtime_usec * 1000;
} else {
- inode->i_ctime = UDF_SB_RECORDTIME(inode->i_sb);
+ inode->i_ctime = sbi->s_record_time;
}
- UDF_I_UNIQUE(inode) = le64_to_cpu(fe->uniqueID);
- UDF_I_LENEATTR(inode) = le32_to_cpu(fe->lengthExtendedAttr);
- UDF_I_LENALLOC(inode) = le32_to_cpu(fe->lengthAllocDescs);
- offset = sizeof(struct fileEntry) + UDF_I_LENEATTR(inode);
+ iinfo->i_unique = le64_to_cpu(fe->uniqueID);
+ iinfo->i_lenEAttr = le32_to_cpu(fe->lengthExtendedAttr);
+ iinfo->i_lenAlloc = le32_to_cpu(fe->lengthAllocDescs);
+ offset = sizeof(struct fileEntry) + iinfo->i_lenEAttr;
} else {
inode->i_blocks = le64_to_cpu(efe->logicalBlocksRecorded) <<
(inode->i_sb->s_blocksize_bits - 9);
@@ -1192,7 +1294,7 @@
inode->i_atime.tv_sec = convtime;
inode->i_atime.tv_nsec = convtime_usec * 1000;
} else {
- inode->i_atime = UDF_SB_RECORDTIME(inode->i_sb);
+ inode->i_atime = sbi->s_record_time;
}
if (udf_stamp_to_time(&convtime, &convtime_usec,
@@ -1200,15 +1302,15 @@
inode->i_mtime.tv_sec = convtime;
inode->i_mtime.tv_nsec = convtime_usec * 1000;
} else {
- inode->i_mtime = UDF_SB_RECORDTIME(inode->i_sb);
+ inode->i_mtime = sbi->s_record_time;
}
if (udf_stamp_to_time(&convtime, &convtime_usec,
lets_to_cpu(efe->createTime))) {
- UDF_I_CRTIME(inode).tv_sec = convtime;
- UDF_I_CRTIME(inode).tv_nsec = convtime_usec * 1000;
+ iinfo->i_crtime.tv_sec = convtime;
+ iinfo->i_crtime.tv_nsec = convtime_usec * 1000;
} else {
- UDF_I_CRTIME(inode) = UDF_SB_RECORDTIME(inode->i_sb);
+ iinfo->i_crtime = sbi->s_record_time;
}
if (udf_stamp_to_time(&convtime, &convtime_usec,
@@ -1216,13 +1318,14 @@
inode->i_ctime.tv_sec = convtime;
inode->i_ctime.tv_nsec = convtime_usec * 1000;
} else {
- inode->i_ctime = UDF_SB_RECORDTIME(inode->i_sb);
+ inode->i_ctime = sbi->s_record_time;
}
- UDF_I_UNIQUE(inode) = le64_to_cpu(efe->uniqueID);
- UDF_I_LENEATTR(inode) = le32_to_cpu(efe->lengthExtendedAttr);
- UDF_I_LENALLOC(inode) = le32_to_cpu(efe->lengthAllocDescs);
- offset = sizeof(struct extendedFileEntry) + UDF_I_LENEATTR(inode);
+ iinfo->i_unique = le64_to_cpu(efe->uniqueID);
+ iinfo->i_lenEAttr = le32_to_cpu(efe->lengthExtendedAttr);
+ iinfo->i_lenAlloc = le32_to_cpu(efe->lengthAllocDescs);
+ offset = sizeof(struct extendedFileEntry) +
+ iinfo->i_lenEAttr;
}
switch (fe->icbTag.fileType) {
@@ -1235,7 +1338,7 @@
case ICBTAG_FILE_TYPE_REALTIME:
case ICBTAG_FILE_TYPE_REGULAR:
case ICBTAG_FILE_TYPE_UNDEF:
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB)
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
inode->i_data.a_ops = &udf_adinicb_aops;
else
inode->i_data.a_ops = &udf_aops;
@@ -1261,31 +1364,33 @@
inode->i_mode = S_IFLNK | S_IRWXUGO;
break;
default:
- printk(KERN_ERR "udf: udf_fill_inode(ino %ld) failed unknown file type=%d\n",
- inode->i_ino, fe->icbTag.fileType);
+ printk(KERN_ERR "udf: udf_fill_inode(ino %ld) failed unknown "
+ "file type=%d\n", inode->i_ino,
+ fe->icbTag.fileType);
make_bad_inode(inode);
return;
}
if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) {
- struct deviceSpec *dsea = (struct deviceSpec *)udf_get_extendedattr(inode, 12, 1);
+ struct deviceSpec *dsea =
+ (struct deviceSpec *)udf_get_extendedattr(inode, 12, 1);
if (dsea) {
init_special_inode(inode, inode->i_mode,
- MKDEV(le32_to_cpu(dsea->majorDeviceIdent),
- le32_to_cpu(dsea->minorDeviceIdent)));
+ MKDEV(le32_to_cpu(dsea->majorDeviceIdent),
+ le32_to_cpu(dsea->minorDeviceIdent)));
/* Developer ID ??? */
- } else {
+ } else
make_bad_inode(inode);
- }
}
}
static int udf_alloc_i_data(struct inode *inode, size_t size)
{
- UDF_I_DATA(inode) = kmalloc(size, GFP_KERNEL);
+ struct udf_inode_info *iinfo = UDF_I(inode);
+ iinfo->i_ext.i_data = kmalloc(size, GFP_KERNEL);
- if (!UDF_I_DATA(inode)) {
- printk(KERN_ERR "udf:udf_alloc_i_data (ino %ld) no free memory\n",
- inode->i_ino);
+ if (!iinfo->i_ext.i_data) {
+ printk(KERN_ERR "udf:udf_alloc_i_data (ino %ld) "
+ "no free memory\n", inode->i_ino);
return -ENOMEM;
}
@@ -1301,12 +1406,12 @@
permissions = le32_to_cpu(fe->permissions);
flags = le16_to_cpu(fe->icbTag.flags);
- mode = (( permissions ) & S_IRWXO) |
- (( permissions >> 2 ) & S_IRWXG) |
- (( permissions >> 4 ) & S_IRWXU) |
- (( flags & ICBTAG_FLAG_SETUID) ? S_ISUID : 0) |
- (( flags & ICBTAG_FLAG_SETGID) ? S_ISGID : 0) |
- (( flags & ICBTAG_FLAG_STICKY) ? S_ISVTX : 0);
+ mode = ((permissions) & S_IRWXO) |
+ ((permissions >> 2) & S_IRWXG) |
+ ((permissions >> 4) & S_IRWXU) |
+ ((flags & ICBTAG_FLAG_SETUID) ? S_ISUID : 0) |
+ ((flags & ICBTAG_FLAG_SETGID) ? S_ISGID : 0) |
+ ((flags & ICBTAG_FLAG_STICKY) ? S_ISVTX : 0);
return mode;
}
@@ -1350,11 +1455,15 @@
uint32_t udfperms;
uint16_t icbflags;
uint16_t crclen;
- int i;
kernel_timestamp cpu_time;
int err = 0;
+ struct udf_sb_info *sbi = UDF_SB(inode->i_sb);
+ unsigned char blocksize_bits = inode->i_sb->s_blocksize_bits;
+ struct udf_inode_info *iinfo = UDF_I(inode);
- bh = udf_tread(inode->i_sb, udf_get_lb_pblock(inode->i_sb, UDF_I_LOCATION(inode), 0));
+ bh = udf_tread(inode->i_sb,
+ udf_get_lb_pblock(inode->i_sb,
+ iinfo->i_location, 0));
if (!bh) {
udf_debug("bread failure\n");
return -EIO;
@@ -1365,23 +1474,24 @@
fe = (struct fileEntry *)bh->b_data;
efe = (struct extendedFileEntry *)bh->b_data;
- if (le16_to_cpu(fe->descTag.tagIdent) == TAG_IDENT_USE) {
+ if (fe->descTag.tagIdent == cpu_to_le16(TAG_IDENT_USE)) {
struct unallocSpaceEntry *use =
(struct unallocSpaceEntry *)bh->b_data;
- use->lengthAllocDescs = cpu_to_le32(UDF_I_LENALLOC(inode));
- memcpy(bh->b_data + sizeof(struct unallocSpaceEntry), UDF_I_DATA(inode),
- inode->i_sb->s_blocksize - sizeof(struct unallocSpaceEntry));
- crclen = sizeof(struct unallocSpaceEntry) + UDF_I_LENALLOC(inode) - sizeof(tag);
- use->descTag.tagLocation = cpu_to_le32(UDF_I_LOCATION(inode).logicalBlockNum);
+ use->lengthAllocDescs = cpu_to_le32(iinfo->i_lenAlloc);
+ memcpy(bh->b_data + sizeof(struct unallocSpaceEntry),
+ iinfo->i_ext.i_data, inode->i_sb->s_blocksize -
+ sizeof(struct unallocSpaceEntry));
+ crclen = sizeof(struct unallocSpaceEntry) +
+ iinfo->i_lenAlloc - sizeof(tag);
+ use->descTag.tagLocation = cpu_to_le32(
+ iinfo->i_location.
+ logicalBlockNum);
use->descTag.descCRCLength = cpu_to_le16(crclen);
- use->descTag.descCRC = cpu_to_le16(udf_crc((char *)use + sizeof(tag), crclen, 0));
-
- use->descTag.tagChecksum = 0;
- for (i = 0; i < 16; i++) {
- if (i != 4)
- use->descTag.tagChecksum += ((uint8_t *)&(use->descTag))[i];
- }
+ use->descTag.descCRC = cpu_to_le16(udf_crc((char *)use +
+ sizeof(tag), crclen,
+ 0));
+ use->descTag.tagChecksum = udf_tag_checksum(&use->descTag);
mark_buffer_dirty(bh);
brelse(bh);
@@ -1398,14 +1508,14 @@
else
fe->gid = cpu_to_le32(inode->i_gid);
- udfperms = ((inode->i_mode & S_IRWXO) ) |
- ((inode->i_mode & S_IRWXG) << 2) |
- ((inode->i_mode & S_IRWXU) << 4);
+ udfperms = ((inode->i_mode & S_IRWXO)) |
+ ((inode->i_mode & S_IRWXG) << 2) |
+ ((inode->i_mode & S_IRWXU) << 4);
- udfperms |= (le32_to_cpu(fe->permissions) &
- (FE_PERM_O_DELETE | FE_PERM_O_CHATTR |
- FE_PERM_G_DELETE | FE_PERM_G_CHATTR |
- FE_PERM_U_DELETE | FE_PERM_U_CHATTR));
+ udfperms |= (le32_to_cpu(fe->permissions) &
+ (FE_PERM_O_DELETE | FE_PERM_O_CHATTR |
+ FE_PERM_G_DELETE | FE_PERM_G_CHATTR |
+ FE_PERM_U_DELETE | FE_PERM_U_CHATTR));
fe->permissions = cpu_to_le32(udfperms);
if (S_ISDIR(inode->i_mode))
@@ -1426,8 +1536,9 @@
sizeof(regid), 12, 0x3);
dsea->attrType = cpu_to_le32(12);
dsea->attrSubtype = 1;
- dsea->attrLength = cpu_to_le32(sizeof(struct deviceSpec) +
- sizeof(regid));
+ dsea->attrLength = cpu_to_le32(
+ sizeof(struct deviceSpec) +
+ sizeof(regid));
dsea->impUseLength = cpu_to_le32(sizeof(regid));
}
eid = (regid *)dsea->impUse;
@@ -1439,12 +1550,13 @@
dsea->minorDeviceIdent = cpu_to_le32(iminor(inode));
}
- if (UDF_I_EFE(inode) == 0) {
- memcpy(bh->b_data + sizeof(struct fileEntry), UDF_I_DATA(inode),
+ if (iinfo->i_efe == 0) {
+ memcpy(bh->b_data + sizeof(struct fileEntry),
+ iinfo->i_ext.i_data,
inode->i_sb->s_blocksize - sizeof(struct fileEntry));
fe->logicalBlocksRecorded = cpu_to_le64(
- (inode->i_blocks + (1 << (inode->i_sb->s_blocksize_bits - 9)) - 1) >>
- (inode->i_sb->s_blocksize_bits - 9));
+ (inode->i_blocks + (1 << (blocksize_bits - 9)) - 1) >>
+ (blocksize_bits - 9));
if (udf_time_to_stamp(&cpu_time, inode->i_atime))
fe->accessTime = cpu_to_lets(cpu_time);
@@ -1456,40 +1568,41 @@
strcpy(fe->impIdent.ident, UDF_ID_DEVELOPER);
fe->impIdent.identSuffix[0] = UDF_OS_CLASS_UNIX;
fe->impIdent.identSuffix[1] = UDF_OS_ID_LINUX;
- fe->uniqueID = cpu_to_le64(UDF_I_UNIQUE(inode));
- fe->lengthExtendedAttr = cpu_to_le32(UDF_I_LENEATTR(inode));
- fe->lengthAllocDescs = cpu_to_le32(UDF_I_LENALLOC(inode));
+ fe->uniqueID = cpu_to_le64(iinfo->i_unique);
+ fe->lengthExtendedAttr = cpu_to_le32(iinfo->i_lenEAttr);
+ fe->lengthAllocDescs = cpu_to_le32(iinfo->i_lenAlloc);
fe->descTag.tagIdent = cpu_to_le16(TAG_IDENT_FE);
crclen = sizeof(struct fileEntry);
} else {
- memcpy(bh->b_data + sizeof(struct extendedFileEntry), UDF_I_DATA(inode),
- inode->i_sb->s_blocksize - sizeof(struct extendedFileEntry));
+ memcpy(bh->b_data + sizeof(struct extendedFileEntry),
+ iinfo->i_ext.i_data,
+ inode->i_sb->s_blocksize -
+ sizeof(struct extendedFileEntry));
efe->objectSize = cpu_to_le64(inode->i_size);
efe->logicalBlocksRecorded = cpu_to_le64(
- (inode->i_blocks + (1 << (inode->i_sb->s_blocksize_bits - 9)) - 1) >>
- (inode->i_sb->s_blocksize_bits - 9));
+ (inode->i_blocks + (1 << (blocksize_bits - 9)) - 1) >>
+ (blocksize_bits - 9));
- if (UDF_I_CRTIME(inode).tv_sec > inode->i_atime.tv_sec ||
- (UDF_I_CRTIME(inode).tv_sec == inode->i_atime.tv_sec &&
- UDF_I_CRTIME(inode).tv_nsec > inode->i_atime.tv_nsec)) {
- UDF_I_CRTIME(inode) = inode->i_atime;
- }
- if (UDF_I_CRTIME(inode).tv_sec > inode->i_mtime.tv_sec ||
- (UDF_I_CRTIME(inode).tv_sec == inode->i_mtime.tv_sec &&
- UDF_I_CRTIME(inode).tv_nsec > inode->i_mtime.tv_nsec)) {
- UDF_I_CRTIME(inode) = inode->i_mtime;
- }
- if (UDF_I_CRTIME(inode).tv_sec > inode->i_ctime.tv_sec ||
- (UDF_I_CRTIME(inode).tv_sec == inode->i_ctime.tv_sec &&
- UDF_I_CRTIME(inode).tv_nsec > inode->i_ctime.tv_nsec)) {
- UDF_I_CRTIME(inode) = inode->i_ctime;
- }
+ if (iinfo->i_crtime.tv_sec > inode->i_atime.tv_sec ||
+ (iinfo->i_crtime.tv_sec == inode->i_atime.tv_sec &&
+ iinfo->i_crtime.tv_nsec > inode->i_atime.tv_nsec))
+ iinfo->i_crtime = inode->i_atime;
+
+ if (iinfo->i_crtime.tv_sec > inode->i_mtime.tv_sec ||
+ (iinfo->i_crtime.tv_sec == inode->i_mtime.tv_sec &&
+ iinfo->i_crtime.tv_nsec > inode->i_mtime.tv_nsec))
+ iinfo->i_crtime = inode->i_mtime;
+
+ if (iinfo->i_crtime.tv_sec > inode->i_ctime.tv_sec ||
+ (iinfo->i_crtime.tv_sec == inode->i_ctime.tv_sec &&
+ iinfo->i_crtime.tv_nsec > inode->i_ctime.tv_nsec))
+ iinfo->i_crtime = inode->i_ctime;
if (udf_time_to_stamp(&cpu_time, inode->i_atime))
efe->accessTime = cpu_to_lets(cpu_time);
if (udf_time_to_stamp(&cpu_time, inode->i_mtime))
efe->modificationTime = cpu_to_lets(cpu_time);
- if (udf_time_to_stamp(&cpu_time, UDF_I_CRTIME(inode)))
+ if (udf_time_to_stamp(&cpu_time, iinfo->i_crtime))
efe->createTime = cpu_to_lets(cpu_time);
if (udf_time_to_stamp(&cpu_time, inode->i_ctime))
efe->attrTime = cpu_to_lets(cpu_time);
@@ -1498,13 +1611,13 @@
strcpy(efe->impIdent.ident, UDF_ID_DEVELOPER);
efe->impIdent.identSuffix[0] = UDF_OS_CLASS_UNIX;
efe->impIdent.identSuffix[1] = UDF_OS_ID_LINUX;
- efe->uniqueID = cpu_to_le64(UDF_I_UNIQUE(inode));
- efe->lengthExtendedAttr = cpu_to_le32(UDF_I_LENEATTR(inode));
- efe->lengthAllocDescs = cpu_to_le32(UDF_I_LENALLOC(inode));
+ efe->uniqueID = cpu_to_le64(iinfo->i_unique);
+ efe->lengthExtendedAttr = cpu_to_le32(iinfo->i_lenEAttr);
+ efe->lengthAllocDescs = cpu_to_le32(iinfo->i_lenAlloc);
efe->descTag.tagIdent = cpu_to_le16(TAG_IDENT_EFE);
crclen = sizeof(struct extendedFileEntry);
}
- if (UDF_I_STRAT4096(inode)) {
+ if (iinfo->i_strat4096) {
fe->icbTag.strategyType = cpu_to_le16(4096);
fe->icbTag.strategyParameter = cpu_to_le16(1);
fe->icbTag.numEntries = cpu_to_le16(2);
@@ -1528,7 +1641,7 @@
else if (S_ISSOCK(inode->i_mode))
fe->icbTag.fileType = ICBTAG_FILE_TYPE_SOCKET;
- icbflags = UDF_I_ALLOCTYPE(inode) |
+ icbflags = iinfo->i_alloc_type |
((inode->i_mode & S_ISUID) ? ICBTAG_FLAG_SETUID : 0) |
((inode->i_mode & S_ISGID) ? ICBTAG_FLAG_SETGID : 0) |
((inode->i_mode & S_ISVTX) ? ICBTAG_FLAG_STICKY : 0) |
@@ -1537,29 +1650,28 @@
ICBTAG_FLAG_SETGID | ICBTAG_FLAG_STICKY));
fe->icbTag.flags = cpu_to_le16(icbflags);
- if (UDF_SB_UDFREV(inode->i_sb) >= 0x0200)
+ if (sbi->s_udfrev >= 0x0200)
fe->descTag.descVersion = cpu_to_le16(3);
else
fe->descTag.descVersion = cpu_to_le16(2);
- fe->descTag.tagSerialNum = cpu_to_le16(UDF_SB_SERIALNUM(inode->i_sb));
- fe->descTag.tagLocation = cpu_to_le32(UDF_I_LOCATION(inode).logicalBlockNum);
- crclen += UDF_I_LENEATTR(inode) + UDF_I_LENALLOC(inode) - sizeof(tag);
+ fe->descTag.tagSerialNum = cpu_to_le16(sbi->s_serial_number);
+ fe->descTag.tagLocation = cpu_to_le32(
+ iinfo->i_location.logicalBlockNum);
+ crclen += iinfo->i_lenEAttr + iinfo->i_lenAlloc -
+ sizeof(tag);
fe->descTag.descCRCLength = cpu_to_le16(crclen);
- fe->descTag.descCRC = cpu_to_le16(udf_crc((char *)fe + sizeof(tag), crclen, 0));
-
- fe->descTag.tagChecksum = 0;
- for (i = 0; i < 16; i++) {
- if (i != 4)
- fe->descTag.tagChecksum += ((uint8_t *)&(fe->descTag))[i];
- }
+ fe->descTag.descCRC = cpu_to_le16(udf_crc((char *)fe + sizeof(tag),
+ crclen, 0));
+ fe->descTag.tagChecksum = udf_tag_checksum(&fe->descTag);
/* write the data blocks */
mark_buffer_dirty(bh);
if (do_sync) {
sync_dirty_buffer(bh);
if (buffer_req(bh) && !buffer_uptodate(bh)) {
- printk("IO error syncing udf inode [%s:%08lx]\n",
- inode->i_sb->s_id, inode->i_ino);
+ printk(KERN_WARNING "IO error syncing udf inode "
+ "[%s:%08lx]\n", inode->i_sb->s_id,
+ inode->i_ino);
err = -EIO;
}
}
@@ -1577,7 +1689,7 @@
return NULL;
if (inode->i_state & I_NEW) {
- memcpy(&UDF_I_LOCATION(inode), &ino, sizeof(kernel_lb_addr));
+ memcpy(&UDF_I(inode)->i_location, &ino, sizeof(kernel_lb_addr));
__udf_read_inode(inode);
unlock_new_inode(inode);
}
@@ -1585,7 +1697,8 @@
if (is_bad_inode(inode))
goto out_iput;
- if (ino.logicalBlockNum >= UDF_SB_PARTLEN(sb, ino.partitionReferenceNum)) {
+ if (ino.logicalBlockNum >= UDF_SB(sb)->
+ s_partmaps[ino.partitionReferenceNum].s_partition_len) {
udf_debug("block=%d, partition=%d out of range\n",
ino.logicalBlockNum, ino.partitionReferenceNum);
make_bad_inode(inode);
@@ -1599,7 +1712,7 @@
return NULL;
}
-int8_t udf_add_aext(struct inode * inode, struct extent_position * epos,
+int8_t udf_add_aext(struct inode *inode, struct extent_position *epos,
kernel_lb_addr eloc, uint32_t elen, int inc)
{
int adsize;
@@ -1608,15 +1721,18 @@
struct allocExtDesc *aed;
int8_t etype;
uint8_t *ptr;
+ struct udf_inode_info *iinfo = UDF_I(inode);
if (!epos->bh)
- ptr = UDF_I_DATA(inode) + epos->offset - udf_file_entry_alloc_offset(inode) + UDF_I_LENEATTR(inode);
+ ptr = iinfo->i_ext.i_data + epos->offset -
+ udf_file_entry_alloc_offset(inode) +
+ iinfo->i_lenEAttr;
else
ptr = epos->bh->b_data + epos->offset;
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_SHORT)
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
adsize = sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_LONG)
+ else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
adsize = sizeof(long_ad);
else
return -1;
@@ -1627,15 +1743,16 @@
int err, loffset;
kernel_lb_addr obloc = epos->block;
- if (!(epos->block.logicalBlockNum = udf_new_block(inode->i_sb, NULL,
- obloc.partitionReferenceNum,
- obloc.logicalBlockNum, &err))) {
+ epos->block.logicalBlockNum = udf_new_block(inode->i_sb, NULL,
+ obloc.partitionReferenceNum,
+ obloc.logicalBlockNum, &err);
+ if (!epos->block.logicalBlockNum)
return -1;
- }
- if (!(nbh = udf_tgetblk(inode->i_sb, udf_get_lb_pblock(inode->i_sb,
- epos->block, 0)))) {
+ nbh = udf_tgetblk(inode->i_sb, udf_get_lb_pblock(inode->i_sb,
+ epos->block,
+ 0));
+ if (!nbh)
return -1;
- }
lock_buffer(nbh);
memset(nbh->b_data, 0x00, inode->i_sb->s_blocksize);
set_buffer_uptodate(nbh);
@@ -1644,7 +1761,8 @@
aed = (struct allocExtDesc *)(nbh->b_data);
if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT))
- aed->previousAllocExtLocation = cpu_to_le32(obloc.logicalBlockNum);
+ aed->previousAllocExtLocation =
+ cpu_to_le32(obloc.logicalBlockNum);
if (epos->offset + adsize > inode->i_sb->s_blocksize) {
loffset = epos->offset;
aed->lengthAllocDescs = cpu_to_le32(adsize);
@@ -1661,24 +1779,26 @@
if (epos->bh) {
aed = (struct allocExtDesc *)epos->bh->b_data;
aed->lengthAllocDescs =
- cpu_to_le32(le32_to_cpu(aed->lengthAllocDescs) + adsize);
+ cpu_to_le32(le32_to_cpu(
+ aed->lengthAllocDescs) + adsize);
} else {
- UDF_I_LENALLOC(inode) += adsize;
+ iinfo->i_lenAlloc += adsize;
mark_inode_dirty(inode);
}
}
- if (UDF_SB_UDFREV(inode->i_sb) >= 0x0200)
+ if (UDF_SB(inode->i_sb)->s_udfrev >= 0x0200)
udf_new_tag(nbh->b_data, TAG_IDENT_AED, 3, 1,
epos->block.logicalBlockNum, sizeof(tag));
else
udf_new_tag(nbh->b_data, TAG_IDENT_AED, 2, 1,
epos->block.logicalBlockNum, sizeof(tag));
- switch (UDF_I_ALLOCTYPE(inode)) {
+ switch (iinfo->i_alloc_type) {
case ICBTAG_FLAG_AD_SHORT:
sad = (short_ad *)sptr;
sad->extLength = cpu_to_le32(EXT_NEXT_EXTENT_ALLOCDECS |
inode->i_sb->s_blocksize);
- sad->extPosition = cpu_to_le32(epos->block.logicalBlockNum);
+ sad->extPosition =
+ cpu_to_le32(epos->block.logicalBlockNum);
break;
case ICBTAG_FLAG_AD_LONG:
lad = (long_ad *)sptr;
@@ -1690,10 +1810,11 @@
}
if (epos->bh) {
if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT) ||
- UDF_SB_UDFREV(inode->i_sb) >= 0x0201)
+ UDF_SB(inode->i_sb)->s_udfrev >= 0x0201)
udf_update_tag(epos->bh->b_data, loffset);
else
- udf_update_tag(epos->bh->b_data, sizeof(struct allocExtDesc));
+ udf_update_tag(epos->bh->b_data,
+ sizeof(struct allocExtDesc));
mark_buffer_dirty_inode(epos->bh, inode);
brelse(epos->bh);
} else {
@@ -1705,36 +1826,43 @@
etype = udf_write_aext(inode, epos, eloc, elen, inc);
if (!epos->bh) {
- UDF_I_LENALLOC(inode) += adsize;
+ iinfo->i_lenAlloc += adsize;
mark_inode_dirty(inode);
} else {
aed = (struct allocExtDesc *)epos->bh->b_data;
aed->lengthAllocDescs =
- cpu_to_le32(le32_to_cpu(aed->lengthAllocDescs) + adsize);
- if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT) || UDF_SB_UDFREV(inode->i_sb) >= 0x0201)
- udf_update_tag(epos->bh->b_data, epos->offset + (inc ? 0 : adsize));
+ cpu_to_le32(le32_to_cpu(aed->lengthAllocDescs) +
+ adsize);
+ if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT) ||
+ UDF_SB(inode->i_sb)->s_udfrev >= 0x0201)
+ udf_update_tag(epos->bh->b_data,
+ epos->offset + (inc ? 0 : adsize));
else
- udf_update_tag(epos->bh->b_data, sizeof(struct allocExtDesc));
+ udf_update_tag(epos->bh->b_data,
+ sizeof(struct allocExtDesc));
mark_buffer_dirty_inode(epos->bh, inode);
}
return etype;
}
-int8_t udf_write_aext(struct inode * inode, struct extent_position * epos,
+int8_t udf_write_aext(struct inode *inode, struct extent_position *epos,
kernel_lb_addr eloc, uint32_t elen, int inc)
{
int adsize;
uint8_t *ptr;
short_ad *sad;
long_ad *lad;
+ struct udf_inode_info *iinfo = UDF_I(inode);
if (!epos->bh)
- ptr = UDF_I_DATA(inode) + epos->offset - udf_file_entry_alloc_offset(inode) + UDF_I_LENEATTR(inode);
+ ptr = iinfo->i_ext.i_data + epos->offset -
+ udf_file_entry_alloc_offset(inode) +
+ iinfo->i_lenEAttr;
else
ptr = epos->bh->b_data + epos->offset;
- switch (UDF_I_ALLOCTYPE(inode)) {
+ switch (iinfo->i_alloc_type) {
case ICBTAG_FLAG_AD_SHORT:
sad = (short_ad *)ptr;
sad->extLength = cpu_to_le32(elen);
@@ -1754,10 +1882,12 @@
if (epos->bh) {
if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT) ||
- UDF_SB_UDFREV(inode->i_sb) >= 0x0201) {
- struct allocExtDesc *aed = (struct allocExtDesc *)epos->bh->b_data;
+ UDF_SB(inode->i_sb)->s_udfrev >= 0x0201) {
+ struct allocExtDesc *aed =
+ (struct allocExtDesc *)epos->bh->b_data;
udf_update_tag(epos->bh->b_data,
- le32_to_cpu(aed->lengthAllocDescs) + sizeof(struct allocExtDesc));
+ le32_to_cpu(aed->lengthAllocDescs) +
+ sizeof(struct allocExtDesc));
}
mark_buffer_dirty_inode(epos->bh, inode);
} else {
@@ -1770,19 +1900,21 @@
return (elen >> 30);
}
-int8_t udf_next_aext(struct inode * inode, struct extent_position * epos,
- kernel_lb_addr * eloc, uint32_t * elen, int inc)
+int8_t udf_next_aext(struct inode *inode, struct extent_position *epos,
+ kernel_lb_addr *eloc, uint32_t *elen, int inc)
{
int8_t etype;
while ((etype = udf_current_aext(inode, epos, eloc, elen, inc)) ==
(EXT_NEXT_EXTENT_ALLOCDECS >> 30)) {
+ int block;
epos->block = *eloc;
epos->offset = sizeof(struct allocExtDesc);
brelse(epos->bh);
- if (!(epos->bh = udf_tread(inode->i_sb, udf_get_lb_pblock(inode->i_sb, epos->block, 0)))) {
- udf_debug("reading block %d failed!\n",
- udf_get_lb_pblock(inode->i_sb, epos->block, 0));
+ block = udf_get_lb_pblock(inode->i_sb, epos->block, 0);
+ epos->bh = udf_tread(inode->i_sb, block);
+ if (!epos->bh) {
+ udf_debug("reading block %d failed!\n", block);
return -1;
}
}
@@ -1790,47 +1922,55 @@
return etype;
}
-int8_t udf_current_aext(struct inode * inode, struct extent_position * epos,
- kernel_lb_addr * eloc, uint32_t * elen, int inc)
+int8_t udf_current_aext(struct inode *inode, struct extent_position *epos,
+ kernel_lb_addr *eloc, uint32_t *elen, int inc)
{
int alen;
int8_t etype;
uint8_t *ptr;
short_ad *sad;
long_ad *lad;
-
+ struct udf_inode_info *iinfo = UDF_I(inode);
if (!epos->bh) {
if (!epos->offset)
epos->offset = udf_file_entry_alloc_offset(inode);
- ptr = UDF_I_DATA(inode) + epos->offset - udf_file_entry_alloc_offset(inode) + UDF_I_LENEATTR(inode);
- alen = udf_file_entry_alloc_offset(inode) + UDF_I_LENALLOC(inode);
+ ptr = iinfo->i_ext.i_data + epos->offset -
+ udf_file_entry_alloc_offset(inode) +
+ iinfo->i_lenEAttr;
+ alen = udf_file_entry_alloc_offset(inode) +
+ iinfo->i_lenAlloc;
} else {
if (!epos->offset)
epos->offset = sizeof(struct allocExtDesc);
ptr = epos->bh->b_data + epos->offset;
alen = sizeof(struct allocExtDesc) +
- le32_to_cpu(((struct allocExtDesc *)epos->bh->b_data)->lengthAllocDescs);
+ le32_to_cpu(((struct allocExtDesc *)epos->bh->b_data)->
+ lengthAllocDescs);
}
- switch (UDF_I_ALLOCTYPE(inode)) {
+ switch (iinfo->i_alloc_type) {
case ICBTAG_FLAG_AD_SHORT:
- if (!(sad = udf_get_fileshortad(ptr, alen, &epos->offset, inc)))
+ sad = udf_get_fileshortad(ptr, alen, &epos->offset, inc);
+ if (!sad)
return -1;
etype = le32_to_cpu(sad->extLength) >> 30;
eloc->logicalBlockNum = le32_to_cpu(sad->extPosition);
- eloc->partitionReferenceNum = UDF_I_LOCATION(inode).partitionReferenceNum;
+ eloc->partitionReferenceNum =
+ iinfo->i_location.partitionReferenceNum;
*elen = le32_to_cpu(sad->extLength) & UDF_EXTENT_LENGTH_MASK;
break;
case ICBTAG_FLAG_AD_LONG:
- if (!(lad = udf_get_filelongad(ptr, alen, &epos->offset, inc)))
+ lad = udf_get_filelongad(ptr, alen, &epos->offset, inc);
+ if (!lad)
return -1;
etype = le32_to_cpu(lad->extLength) >> 30;
*eloc = lelb_to_cpu(lad->extLocation);
*elen = le32_to_cpu(lad->extLength) & UDF_EXTENT_LENGTH_MASK;
break;
default:
- udf_debug("alloc_type = %d unsupported\n", UDF_I_ALLOCTYPE(inode));
+ udf_debug("alloc_type = %d unsupported\n",
+ iinfo->i_alloc_type);
return -1;
}
@@ -1858,22 +1998,24 @@
return (nelen >> 30);
}
-int8_t udf_delete_aext(struct inode * inode, struct extent_position epos,
+int8_t udf_delete_aext(struct inode *inode, struct extent_position epos,
kernel_lb_addr eloc, uint32_t elen)
{
struct extent_position oepos;
int adsize;
int8_t etype;
struct allocExtDesc *aed;
+ struct udf_inode_info *iinfo;
if (epos.bh) {
get_bh(epos.bh);
get_bh(epos.bh);
}
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_SHORT)
+ iinfo = UDF_I(inode);
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
adsize = sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_LONG)
+ else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
adsize = sizeof(long_ad);
else
adsize = 0;
@@ -1900,33 +2042,39 @@
udf_write_aext(inode, &oepos, eloc, elen, 1);
udf_write_aext(inode, &oepos, eloc, elen, 1);
if (!oepos.bh) {
- UDF_I_LENALLOC(inode) -= (adsize * 2);
+ iinfo->i_lenAlloc -= (adsize * 2);
mark_inode_dirty(inode);
} else {
aed = (struct allocExtDesc *)oepos.bh->b_data;
aed->lengthAllocDescs =
- cpu_to_le32(le32_to_cpu(aed->lengthAllocDescs) - (2 * adsize));
+ cpu_to_le32(le32_to_cpu(aed->lengthAllocDescs) -
+ (2 * adsize));
if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT) ||
- UDF_SB_UDFREV(inode->i_sb) >= 0x0201)
- udf_update_tag(oepos.bh->b_data, oepos.offset - (2 * adsize));
+ UDF_SB(inode->i_sb)->s_udfrev >= 0x0201)
+ udf_update_tag(oepos.bh->b_data,
+ oepos.offset - (2 * adsize));
else
- udf_update_tag(oepos.bh->b_data, sizeof(struct allocExtDesc));
+ udf_update_tag(oepos.bh->b_data,
+ sizeof(struct allocExtDesc));
mark_buffer_dirty_inode(oepos.bh, inode);
}
} else {
udf_write_aext(inode, &oepos, eloc, elen, 1);
if (!oepos.bh) {
- UDF_I_LENALLOC(inode) -= adsize;
+ iinfo->i_lenAlloc -= adsize;
mark_inode_dirty(inode);
} else {
aed = (struct allocExtDesc *)oepos.bh->b_data;
aed->lengthAllocDescs =
- cpu_to_le32(le32_to_cpu(aed->lengthAllocDescs) - adsize);
+ cpu_to_le32(le32_to_cpu(aed->lengthAllocDescs) -
+ adsize);
if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT) ||
- UDF_SB_UDFREV(inode->i_sb) >= 0x0201)
- udf_update_tag(oepos.bh->b_data, epos.offset - adsize);
+ UDF_SB(inode->i_sb)->s_udfrev >= 0x0201)
+ udf_update_tag(oepos.bh->b_data,
+ epos.offset - adsize);
else
- udf_update_tag(oepos.bh->b_data, sizeof(struct allocExtDesc));
+ udf_update_tag(oepos.bh->b_data,
+ sizeof(struct allocExtDesc));
mark_buffer_dirty_inode(oepos.bh, inode);
}
}
@@ -1937,34 +2085,38 @@
return (elen >> 30);
}
-int8_t inode_bmap(struct inode * inode, sector_t block,
- struct extent_position * pos, kernel_lb_addr * eloc,
- uint32_t * elen, sector_t * offset)
+int8_t inode_bmap(struct inode *inode, sector_t block,
+ struct extent_position *pos, kernel_lb_addr *eloc,
+ uint32_t *elen, sector_t *offset)
{
+ unsigned char blocksize_bits = inode->i_sb->s_blocksize_bits;
loff_t lbcount = 0, bcount =
- (loff_t) block << inode->i_sb->s_blocksize_bits;
+ (loff_t) block << blocksize_bits;
int8_t etype;
+ struct udf_inode_info *iinfo;
if (block < 0) {
printk(KERN_ERR "udf: inode_bmap: block < 0\n");
return -1;
}
+ iinfo = UDF_I(inode);
pos->offset = 0;
- pos->block = UDF_I_LOCATION(inode);
+ pos->block = iinfo->i_location;
pos->bh = NULL;
*elen = 0;
do {
- if ((etype = udf_next_aext(inode, pos, eloc, elen, 1)) == -1) {
- *offset = (bcount - lbcount) >> inode->i_sb->s_blocksize_bits;
- UDF_I_LENEXTENTS(inode) = lbcount;
+ etype = udf_next_aext(inode, pos, eloc, elen, 1);
+ if (etype == -1) {
+ *offset = (bcount - lbcount) >> blocksize_bits;
+ iinfo->i_lenExtents = lbcount;
return -1;
}
lbcount += *elen;
} while (lbcount <= bcount);
- *offset = (bcount + *elen - lbcount) >> inode->i_sb->s_blocksize_bits;
+ *offset = (bcount + *elen - lbcount) >> blocksize_bits;
return etype;
}
@@ -1979,7 +2131,8 @@
lock_kernel();
- if (inode_bmap(inode, block, &epos, &eloc, &elen, &offset) == (EXT_RECORDED_ALLOCATED >> 30))
+ if (inode_bmap(inode, block, &epos, &eloc, &elen, &offset) ==
+ (EXT_RECORDED_ALLOCATED >> 30))
ret = udf_get_lb_pblock(inode->i_sb, eloc, offset);
else
ret = 0;
diff --git a/fs/udf/misc.c b/fs/udf/misc.c
index 15297de..a1d6da0 100644
--- a/fs/udf/misc.c
+++ b/fs/udf/misc.c
@@ -51,18 +51,18 @@
uint8_t *ea = NULL, *ad = NULL;
int offset;
uint16_t crclen;
- int i;
+ struct udf_inode_info *iinfo = UDF_I(inode);
- ea = UDF_I_DATA(inode);
- if (UDF_I_LENEATTR(inode)) {
- ad = UDF_I_DATA(inode) + UDF_I_LENEATTR(inode);
+ ea = iinfo->i_ext.i_data;
+ if (iinfo->i_lenEAttr) {
+ ad = iinfo->i_ext.i_data + iinfo->i_lenEAttr;
} else {
ad = ea;
size += sizeof(struct extendedAttrHeaderDesc);
}
offset = inode->i_sb->s_blocksize - udf_file_entry_alloc_offset(inode) -
- UDF_I_LENALLOC(inode);
+ iinfo->i_lenAlloc;
/* TODO - Check for FreeEASpace */
@@ -70,69 +70,80 @@
struct extendedAttrHeaderDesc *eahd;
eahd = (struct extendedAttrHeaderDesc *)ea;
- if (UDF_I_LENALLOC(inode)) {
- memmove(&ad[size], ad, UDF_I_LENALLOC(inode));
- }
+ if (iinfo->i_lenAlloc)
+ memmove(&ad[size], ad, iinfo->i_lenAlloc);
- if (UDF_I_LENEATTR(inode)) {
+ if (iinfo->i_lenEAttr) {
/* check checksum/crc */
- if (le16_to_cpu(eahd->descTag.tagIdent) != TAG_IDENT_EAHD ||
- le32_to_cpu(eahd->descTag.tagLocation) != UDF_I_LOCATION(inode).logicalBlockNum) {
+ if (eahd->descTag.tagIdent !=
+ cpu_to_le16(TAG_IDENT_EAHD) ||
+ le32_to_cpu(eahd->descTag.tagLocation) !=
+ iinfo->i_location.logicalBlockNum)
return NULL;
- }
} else {
+ struct udf_sb_info *sbi = UDF_SB(inode->i_sb);
+
size -= sizeof(struct extendedAttrHeaderDesc);
- UDF_I_LENEATTR(inode) += sizeof(struct extendedAttrHeaderDesc);
+ iinfo->i_lenEAttr +=
+ sizeof(struct extendedAttrHeaderDesc);
eahd->descTag.tagIdent = cpu_to_le16(TAG_IDENT_EAHD);
- if (UDF_SB_UDFREV(inode->i_sb) >= 0x0200)
+ if (sbi->s_udfrev >= 0x0200)
eahd->descTag.descVersion = cpu_to_le16(3);
else
eahd->descTag.descVersion = cpu_to_le16(2);
- eahd->descTag.tagSerialNum = cpu_to_le16(UDF_SB_SERIALNUM(inode->i_sb));
- eahd->descTag.tagLocation = cpu_to_le32(UDF_I_LOCATION(inode).logicalBlockNum);
+ eahd->descTag.tagSerialNum =
+ cpu_to_le16(sbi->s_serial_number);
+ eahd->descTag.tagLocation = cpu_to_le32(
+ iinfo->i_location.logicalBlockNum);
eahd->impAttrLocation = cpu_to_le32(0xFFFFFFFF);
eahd->appAttrLocation = cpu_to_le32(0xFFFFFFFF);
}
- offset = UDF_I_LENEATTR(inode);
+ offset = iinfo->i_lenEAttr;
if (type < 2048) {
- if (le32_to_cpu(eahd->appAttrLocation) < UDF_I_LENEATTR(inode)) {
- uint32_t aal = le32_to_cpu(eahd->appAttrLocation);
+ if (le32_to_cpu(eahd->appAttrLocation) <
+ iinfo->i_lenEAttr) {
+ uint32_t aal =
+ le32_to_cpu(eahd->appAttrLocation);
memmove(&ea[offset - aal + size],
&ea[aal], offset - aal);
offset -= aal;
- eahd->appAttrLocation = cpu_to_le32(aal + size);
+ eahd->appAttrLocation =
+ cpu_to_le32(aal + size);
}
- if (le32_to_cpu(eahd->impAttrLocation) < UDF_I_LENEATTR(inode)) {
- uint32_t ial = le32_to_cpu(eahd->impAttrLocation);
+ if (le32_to_cpu(eahd->impAttrLocation) <
+ iinfo->i_lenEAttr) {
+ uint32_t ial =
+ le32_to_cpu(eahd->impAttrLocation);
memmove(&ea[offset - ial + size],
&ea[ial], offset - ial);
offset -= ial;
- eahd->impAttrLocation = cpu_to_le32(ial + size);
+ eahd->impAttrLocation =
+ cpu_to_le32(ial + size);
}
} else if (type < 65536) {
- if (le32_to_cpu(eahd->appAttrLocation) < UDF_I_LENEATTR(inode)) {
- uint32_t aal = le32_to_cpu(eahd->appAttrLocation);
+ if (le32_to_cpu(eahd->appAttrLocation) <
+ iinfo->i_lenEAttr) {
+ uint32_t aal =
+ le32_to_cpu(eahd->appAttrLocation);
memmove(&ea[offset - aal + size],
&ea[aal], offset - aal);
offset -= aal;
- eahd->appAttrLocation = cpu_to_le32(aal + size);
+ eahd->appAttrLocation =
+ cpu_to_le32(aal + size);
}
}
/* rewrite CRC + checksum of eahd */
crclen = sizeof(struct extendedAttrHeaderDesc) - sizeof(tag);
eahd->descTag.descCRCLength = cpu_to_le16(crclen);
eahd->descTag.descCRC = cpu_to_le16(udf_crc((char *)eahd +
- sizeof(tag), crclen, 0));
- eahd->descTag.tagChecksum = 0;
- for (i = 0; i < 16; i++)
- if (i != 4)
- eahd->descTag.tagChecksum += ((uint8_t *)&(eahd->descTag))[i];
- UDF_I_LENEATTR(inode) += size;
+ sizeof(tag), crclen, 0));
+ eahd->descTag.tagChecksum = udf_tag_checksum(&eahd->descTag);
+ iinfo->i_lenEAttr += size;
return (struct genericFormat *)&ea[offset];
}
- if (loc & 0x02) {
- }
+ if (loc & 0x02)
+ ;
return NULL;
}
@@ -143,18 +154,20 @@
struct genericFormat *gaf;
uint8_t *ea = NULL;
uint32_t offset;
+ struct udf_inode_info *iinfo = UDF_I(inode);
- ea = UDF_I_DATA(inode);
+ ea = iinfo->i_ext.i_data;
- if (UDF_I_LENEATTR(inode)) {
+ if (iinfo->i_lenEAttr) {
struct extendedAttrHeaderDesc *eahd;
eahd = (struct extendedAttrHeaderDesc *)ea;
/* check checksum/crc */
- if (le16_to_cpu(eahd->descTag.tagIdent) != TAG_IDENT_EAHD ||
- le32_to_cpu(eahd->descTag.tagLocation) != UDF_I_LOCATION(inode).logicalBlockNum) {
+ if (eahd->descTag.tagIdent !=
+ cpu_to_le16(TAG_IDENT_EAHD) ||
+ le32_to_cpu(eahd->descTag.tagLocation) !=
+ iinfo->i_location.logicalBlockNum)
return NULL;
- }
if (type < 2048)
offset = sizeof(struct extendedAttrHeaderDesc);
@@ -163,9 +176,10 @@
else
offset = le32_to_cpu(eahd->appAttrLocation);
- while (offset < UDF_I_LENEATTR(inode)) {
+ while (offset < iinfo->i_lenEAttr) {
gaf = (struct genericFormat *)&ea[offset];
- if (le32_to_cpu(gaf->attrType) == type && gaf->attrSubtype == subtype)
+ if (le32_to_cpu(gaf->attrType) == type &&
+ gaf->attrSubtype == subtype)
return gaf;
else
offset += le32_to_cpu(gaf->attrLength);
@@ -186,21 +200,20 @@
* Written, tested, and released.
*/
struct buffer_head *udf_read_tagged(struct super_block *sb, uint32_t block,
- uint32_t location, uint16_t * ident)
+ uint32_t location, uint16_t *ident)
{
tag *tag_p;
struct buffer_head *bh = NULL;
- register uint8_t checksum;
- register int i;
+ struct udf_sb_info *sbi = UDF_SB(sb);
/* Read the block */
if (block == 0xFFFFFFFF)
return NULL;
- bh = udf_tread(sb, block + UDF_SB_SESSION(sb));
+ bh = udf_tread(sb, block + sbi->s_session);
if (!bh) {
udf_debug("block=%d, location=%d: read failed\n",
- block + UDF_SB_SESSION(sb), location);
+ block + sbi->s_session, location);
return NULL;
}
@@ -210,24 +223,20 @@
if (location != le32_to_cpu(tag_p->tagLocation)) {
udf_debug("location mismatch block %u, tag %u != %u\n",
- block + UDF_SB_SESSION(sb), le32_to_cpu(tag_p->tagLocation), location);
+ block + sbi->s_session,
+ le32_to_cpu(tag_p->tagLocation), location);
goto error_out;
}
/* Verify the tag checksum */
- checksum = 0U;
- for (i = 0; i < 4; i++)
- checksum += (uint8_t)(bh->b_data[i]);
- for (i = 5; i < 16; i++)
- checksum += (uint8_t)(bh->b_data[i]);
- if (checksum != tag_p->tagChecksum) {
+ if (udf_tag_checksum(tag_p) != tag_p->tagChecksum) {
printk(KERN_ERR "udf: tag checksum failed block %d\n", block);
goto error_out;
}
/* Verify the tag version */
- if (le16_to_cpu(tag_p->descVersion) != 0x0002U &&
- le16_to_cpu(tag_p->descVersion) != 0x0003U) {
+ if (tag_p->descVersion != cpu_to_le16(0x0002U) &&
+ tag_p->descVersion != cpu_to_le16(0x0003U)) {
udf_debug("tag version 0x%04x != 0x0002 || 0x0003 block %d\n",
le16_to_cpu(tag_p->descVersion), block);
goto error_out;
@@ -236,11 +245,11 @@
/* Verify the descriptor CRC */
if (le16_to_cpu(tag_p->descCRCLength) + sizeof(tag) > sb->s_blocksize ||
le16_to_cpu(tag_p->descCRC) == udf_crc(bh->b_data + sizeof(tag),
- le16_to_cpu(tag_p->descCRCLength), 0)) {
+ le16_to_cpu(tag_p->descCRCLength), 0))
return bh;
- }
+
udf_debug("Crc failure block %d: crc = %d, crclen = %d\n",
- block + UDF_SB_SESSION(sb), le16_to_cpu(tag_p->descCRC),
+ block + sbi->s_session, le16_to_cpu(tag_p->descCRC),
le16_to_cpu(tag_p->descCRCLength));
error_out:
@@ -249,7 +258,7 @@
}
struct buffer_head *udf_read_ptagged(struct super_block *sb, kernel_lb_addr loc,
- uint32_t offset, uint16_t * ident)
+ uint32_t offset, uint16_t *ident)
{
return udf_read_tagged(sb, udf_get_lb_pblock(sb, loc, offset),
loc.logicalBlockNum + offset, ident);
@@ -258,17 +267,11 @@
void udf_update_tag(char *data, int length)
{
tag *tptr = (tag *)data;
- int i;
-
length -= sizeof(tag);
- tptr->tagChecksum = 0;
tptr->descCRCLength = cpu_to_le16(length);
tptr->descCRC = cpu_to_le16(udf_crc(data + sizeof(tag), length, 0));
-
- for (i = 0; i < 16; i++)
- if (i != 4)
- tptr->tagChecksum += (uint8_t)(data[i]);
+ tptr->tagChecksum = udf_tag_checksum(tptr);
}
void udf_new_tag(char *data, uint16_t ident, uint16_t version, uint16_t snum,
@@ -281,3 +284,14 @@
tptr->tagLocation = cpu_to_le32(loc);
udf_update_tag(data, length);
}
+
+u8 udf_tag_checksum(const tag *t)
+{
+ u8 *data = (u8 *)t;
+ u8 checksum = 0;
+ int i;
+ for (i = 0; i < sizeof(tag); ++i)
+ if (i != 4) /* position of checksum */
+ checksum += data[i];
+ return checksum;
+}
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index bec96a6..112a5fb 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -43,12 +43,10 @@
int udf_write_fi(struct inode *inode, struct fileIdentDesc *cfi,
struct fileIdentDesc *sfi, struct udf_fileident_bh *fibh,
- uint8_t * impuse, uint8_t * fileident)
+ uint8_t *impuse, uint8_t *fileident)
{
uint16_t crclen = fibh->eoffset - fibh->soffset - sizeof(tag);
uint16_t crc;
- uint8_t checksum = 0;
- int i;
int offset;
uint16_t liu = le16_to_cpu(cfi->lengthOfImpUse);
uint8_t lfi = cfi->lengthFileIdent;
@@ -56,7 +54,7 @@
sizeof(struct fileIdentDesc);
int adinicb = 0;
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB)
+ if (UDF_I(inode)->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
adinicb = 1;
offset = fibh->soffset + sizeof(struct fileIdentDesc);
@@ -68,7 +66,8 @@
memcpy(fibh->ebh->b_data + offset, impuse, liu);
} else {
memcpy((uint8_t *)sfi->impUse, impuse, -offset);
- memcpy(fibh->ebh->b_data, impuse - offset, liu + offset);
+ memcpy(fibh->ebh->b_data, impuse - offset,
+ liu + offset);
}
}
@@ -80,8 +79,10 @@
} else if (offset >= 0) {
memcpy(fibh->ebh->b_data + offset, fileident, lfi);
} else {
- memcpy((uint8_t *)sfi->fileIdent + liu, fileident, -offset);
- memcpy(fibh->ebh->b_data, fileident - offset, lfi + offset);
+ memcpy((uint8_t *)sfi->fileIdent + liu, fileident,
+ -offset);
+ memcpy(fibh->ebh->b_data, fileident - offset,
+ lfi + offset);
}
}
@@ -101,27 +102,29 @@
if (fibh->sbh == fibh->ebh) {
crc = udf_crc((uint8_t *)sfi->impUse,
- crclen + sizeof(tag) - sizeof(struct fileIdentDesc), crc);
+ crclen + sizeof(tag) -
+ sizeof(struct fileIdentDesc), crc);
} else if (sizeof(struct fileIdentDesc) >= -fibh->soffset) {
- crc = udf_crc(fibh->ebh->b_data + sizeof(struct fileIdentDesc) + fibh->soffset,
- crclen + sizeof(tag) - sizeof(struct fileIdentDesc), crc);
+ crc = udf_crc(fibh->ebh->b_data +
+ sizeof(struct fileIdentDesc) +
+ fibh->soffset,
+ crclen + sizeof(tag) -
+ sizeof(struct fileIdentDesc),
+ crc);
} else {
crc = udf_crc((uint8_t *)sfi->impUse,
- -fibh->soffset - sizeof(struct fileIdentDesc), crc);
+ -fibh->soffset - sizeof(struct fileIdentDesc),
+ crc);
crc = udf_crc(fibh->ebh->b_data, fibh->eoffset, crc);
}
cfi->descTag.descCRC = cpu_to_le16(crc);
cfi->descTag.descCRCLength = cpu_to_le16(crclen);
+ cfi->descTag.tagChecksum = udf_tag_checksum(&cfi->descTag);
- for (i = 0; i < 16; i++) {
- if (i != 4)
- checksum += ((uint8_t *)&cfi->descTag)[i];
- }
-
- cfi->descTag.tagChecksum = checksum;
if (adinicb || (sizeof(struct fileIdentDesc) <= -fibh->soffset)) {
- memcpy((uint8_t *)sfi, (uint8_t *)cfi, sizeof(struct fileIdentDesc));
+ memcpy((uint8_t *)sfi, (uint8_t *)cfi,
+ sizeof(struct fileIdentDesc));
} else {
memcpy((uint8_t *)sfi, (uint8_t *)cfi, -fibh->soffset);
memcpy(fibh->ebh->b_data, (uint8_t *)cfi - fibh->soffset,
@@ -155,26 +158,28 @@
uint32_t elen;
sector_t offset;
struct extent_position epos = {};
+ struct udf_inode_info *dinfo = UDF_I(dir);
- size = (udf_ext0_offset(dir) + dir->i_size) >> 2;
- f_pos = (udf_ext0_offset(dir) >> 2);
+ size = udf_ext0_offset(dir) + dir->i_size;
+ f_pos = udf_ext0_offset(dir);
- fibh->soffset = fibh->eoffset = (f_pos & ((dir->i_sb->s_blocksize - 1) >> 2)) << 2;
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB) {
+ fibh->soffset = fibh->eoffset = f_pos & (dir->i_sb->s_blocksize - 1);
+ if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
fibh->sbh = fibh->ebh = NULL;
- } else if (inode_bmap(dir, f_pos >> (dir->i_sb->s_blocksize_bits - 2),
- &epos, &eloc, &elen, &offset) == (EXT_RECORDED_ALLOCATED >> 30)) {
+ else if (inode_bmap(dir, f_pos >> dir->i_sb->s_blocksize_bits,
+ &epos, &eloc, &elen, &offset) ==
+ (EXT_RECORDED_ALLOCATED >> 30)) {
block = udf_get_lb_pblock(dir->i_sb, eloc, offset);
if ((++offset << dir->i_sb->s_blocksize_bits) < elen) {
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_SHORT)
+ if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
epos.offset -= sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_LONG)
+ else if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
epos.offset -= sizeof(long_ad);
- } else {
+ } else
offset = 0;
- }
- if (!(fibh->sbh = fibh->ebh = udf_tread(dir->i_sb, block))) {
+ fibh->sbh = fibh->ebh = udf_tread(dir->i_sb, block);
+ if (!fibh->sbh) {
brelse(epos.bh);
return NULL;
}
@@ -183,7 +188,7 @@
return NULL;
}
- while ((f_pos < size)) {
+ while (f_pos < size) {
fi = udf_fileident_read(dir, &f_pos, fibh, cfi, &epos, &eloc,
&elen, &offset);
if (!fi) {
@@ -202,14 +207,18 @@
} else {
int poffset; /* Unpaded ending offset */
- poffset = fibh->soffset + sizeof(struct fileIdentDesc) + liu + lfi;
+ poffset = fibh->soffset + sizeof(struct fileIdentDesc) +
+ liu + lfi;
- if (poffset >= lfi) {
- nameptr = (uint8_t *)(fibh->ebh->b_data + poffset - lfi);
- } else {
+ if (poffset >= lfi)
+ nameptr = (uint8_t *)(fibh->ebh->b_data +
+ poffset - lfi);
+ else {
nameptr = fname;
- memcpy(nameptr, fi->fileIdent + liu, lfi - poffset);
- memcpy(nameptr + lfi - poffset, fibh->ebh->b_data, poffset);
+ memcpy(nameptr, fi->fileIdent + liu,
+ lfi - poffset);
+ memcpy(nameptr + lfi - poffset,
+ fibh->ebh->b_data, poffset);
}
}
@@ -226,11 +235,11 @@
if (!lfi)
continue;
- if ((flen = udf_get_filename(dir->i_sb, nameptr, fname, lfi))) {
- if (udf_match(flen, fname, dentry->d_name.len, dentry->d_name.name)) {
- brelse(epos.bh);
- return fi;
- }
+ flen = udf_get_filename(dir->i_sb, nameptr, fname, lfi);
+ if (flen && udf_match(flen, fname, dentry->d_name.len,
+ dentry->d_name.name)) {
+ brelse(epos.bh);
+ return fi;
}
}
@@ -291,16 +300,16 @@
if (!strncmp(dentry->d_name.name, ".B=", 3)) {
kernel_lb_addr lb = {
.logicalBlockNum = 0,
- .partitionReferenceNum = simple_strtoul(dentry->d_name.name + 3,
- NULL, 0),
+ .partitionReferenceNum =
+ simple_strtoul(dentry->d_name.name + 3,
+ NULL, 0),
};
inode = udf_iget(dir->i_sb, lb);
if (!inode) {
unlock_kernel();
return ERR_PTR(-EACCES);
}
- }
- else
+ } else
#endif /* UDF_RECOVERY */
if (udf_find_entry(dir, dentry, &fibh, &cfi)) {
@@ -325,14 +334,14 @@
struct udf_fileident_bh *fibh,
struct fileIdentDesc *cfi, int *err)
{
- struct super_block *sb;
+ struct super_block *sb = dir->i_sb;
struct fileIdentDesc *fi = NULL;
char name[UDF_NAME_LEN], fname[UDF_NAME_LEN];
int namelen;
loff_t f_pos;
int flen;
char *nameptr;
- loff_t size = (udf_ext0_offset(dir) + dir->i_size) >> 2;
+ loff_t size = udf_ext0_offset(dir) + dir->i_size;
int nfidlen;
uint8_t lfi;
uint16_t liu;
@@ -341,16 +350,16 @@
uint32_t elen;
sector_t offset;
struct extent_position epos = {};
-
- sb = dir->i_sb;
+ struct udf_inode_info *dinfo;
if (dentry) {
if (!dentry->d_name.len) {
*err = -EINVAL;
return NULL;
}
- if (!(namelen = udf_put_filename(sb, dentry->d_name.name, name,
- dentry->d_name.len))) {
+ namelen = udf_put_filename(sb, dentry->d_name.name, name,
+ dentry->d_name.len);
+ if (!namelen) {
*err = -ENAMETOOLONG;
return NULL;
}
@@ -360,39 +369,40 @@
nfidlen = (sizeof(struct fileIdentDesc) + namelen + 3) & ~3;
- f_pos = (udf_ext0_offset(dir) >> 2);
+ f_pos = udf_ext0_offset(dir);
- fibh->soffset = fibh->eoffset = (f_pos & ((dir->i_sb->s_blocksize - 1) >> 2)) << 2;
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB) {
+ fibh->soffset = fibh->eoffset = f_pos & (dir->i_sb->s_blocksize - 1);
+ dinfo = UDF_I(dir);
+ if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
fibh->sbh = fibh->ebh = NULL;
- } else if (inode_bmap(dir, f_pos >> (dir->i_sb->s_blocksize_bits - 2),
- &epos, &eloc, &elen, &offset) == (EXT_RECORDED_ALLOCATED >> 30)) {
+ else if (inode_bmap(dir, f_pos >> dir->i_sb->s_blocksize_bits,
+ &epos, &eloc, &elen, &offset) ==
+ (EXT_RECORDED_ALLOCATED >> 30)) {
block = udf_get_lb_pblock(dir->i_sb, eloc, offset);
if ((++offset << dir->i_sb->s_blocksize_bits) < elen) {
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_SHORT)
+ if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
epos.offset -= sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_LONG)
+ else if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
epos.offset -= sizeof(long_ad);
- } else {
+ } else
offset = 0;
- }
- if (!(fibh->sbh = fibh->ebh = udf_tread(dir->i_sb, block))) {
+ fibh->sbh = fibh->ebh = udf_tread(dir->i_sb, block);
+ if (!fibh->sbh) {
brelse(epos.bh);
*err = -EIO;
return NULL;
}
- block = UDF_I_LOCATION(dir).logicalBlockNum;
-
+ block = dinfo->i_location.logicalBlockNum;
} else {
- block = udf_get_lb_pblock(dir->i_sb, UDF_I_LOCATION(dir), 0);
+ block = udf_get_lb_pblock(dir->i_sb, dinfo->i_location, 0);
fibh->sbh = fibh->ebh = NULL;
fibh->soffset = fibh->eoffset = sb->s_blocksize;
goto add;
}
- while ((f_pos < size)) {
+ while (f_pos < size) {
fi = udf_fileident_read(dir, &f_pos, fibh, cfi, &epos, &eloc,
&elen, &offset);
@@ -408,33 +418,39 @@
liu = le16_to_cpu(cfi->lengthOfImpUse);
lfi = cfi->lengthFileIdent;
- if (fibh->sbh == fibh->ebh) {
+ if (fibh->sbh == fibh->ebh)
nameptr = fi->fileIdent + liu;
- } else {
+ else {
int poffset; /* Unpaded ending offset */
- poffset = fibh->soffset + sizeof(struct fileIdentDesc) + liu + lfi;
+ poffset = fibh->soffset + sizeof(struct fileIdentDesc) +
+ liu + lfi;
- if (poffset >= lfi) {
- nameptr = (char *)(fibh->ebh->b_data + poffset - lfi);
- } else {
+ if (poffset >= lfi)
+ nameptr = (char *)(fibh->ebh->b_data +
+ poffset - lfi);
+ else {
nameptr = fname;
- memcpy(nameptr, fi->fileIdent + liu, lfi - poffset);
- memcpy(nameptr + lfi - poffset, fibh->ebh->b_data, poffset);
+ memcpy(nameptr, fi->fileIdent + liu,
+ lfi - poffset);
+ memcpy(nameptr + lfi - poffset,
+ fibh->ebh->b_data, poffset);
}
}
if ((cfi->fileCharacteristics & FID_FILE_CHAR_DELETED) != 0) {
- if (((sizeof(struct fileIdentDesc) + liu + lfi + 3) & ~3) == nfidlen) {
+ if (((sizeof(struct fileIdentDesc) +
+ liu + lfi + 3) & ~3) == nfidlen) {
brelse(epos.bh);
cfi->descTag.tagSerialNum = cpu_to_le16(1);
cfi->fileVersionNum = cpu_to_le16(1);
cfi->fileCharacteristics = 0;
cfi->lengthFileIdent = namelen;
cfi->lengthOfImpUse = cpu_to_le16(0);
- if (!udf_write_fi(dir, cfi, fi, fibh, NULL, name)) {
+ if (!udf_write_fi(dir, cfi, fi, fibh, NULL,
+ name))
return fi;
- } else {
+ else {
*err = -EIO;
return NULL;
}
@@ -444,8 +460,9 @@
if (!lfi || !dentry)
continue;
- if ((flen = udf_get_filename(dir->i_sb, nameptr, fname, lfi)) &&
- udf_match(flen, fname, dentry->d_name.len, dentry->d_name.name)) {
+ flen = udf_get_filename(dir->i_sb, nameptr, fname, lfi);
+ if (flen && udf_match(flen, fname, dentry->d_name.len,
+ dentry->d_name.name)) {
if (fibh->sbh != fibh->ebh)
brelse(fibh->ebh);
brelse(fibh->sbh);
@@ -456,29 +473,34 @@
}
add:
+ if (dinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB) {
+ elen = (elen + sb->s_blocksize - 1) & ~(sb->s_blocksize - 1);
+ if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
+ epos.offset -= sizeof(short_ad);
+ else if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
+ epos.offset -= sizeof(long_ad);
+ udf_write_aext(dir, &epos, eloc, elen, 1);
+ }
f_pos += nfidlen;
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB &&
+ if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB &&
sb->s_blocksize - fibh->eoffset < nfidlen) {
brelse(epos.bh);
epos.bh = NULL;
fibh->soffset -= udf_ext0_offset(dir);
fibh->eoffset -= udf_ext0_offset(dir);
- f_pos -= (udf_ext0_offset(dir) >> 2);
+ f_pos -= udf_ext0_offset(dir);
if (fibh->sbh != fibh->ebh)
brelse(fibh->ebh);
brelse(fibh->sbh);
- if (!(fibh->sbh = fibh->ebh = udf_expand_dir_adinicb(dir, &block, err)))
+ fibh->sbh = fibh->ebh =
+ udf_expand_dir_adinicb(dir, &block, err);
+ if (!fibh->sbh)
return NULL;
- epos.block = UDF_I_LOCATION(dir);
- eloc.logicalBlockNum = block;
- eloc.partitionReferenceNum = UDF_I_LOCATION(dir).partitionReferenceNum;
- elen = dir->i_sb->s_blocksize;
+ epos.block = dinfo->i_location;
epos.offset = udf_file_entry_alloc_offset(dir);
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_SHORT)
- epos.offset += sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_LONG)
- epos.offset += sizeof(long_ad);
+ /* Load extent udf_expand_dir_adinicb() has created */
+ udf_current_aext(dir, &epos, &eloc, &elen, 1);
}
if (sb->s_blocksize - fibh->eoffset >= nfidlen) {
@@ -489,15 +511,19 @@
fibh->sbh = fibh->ebh;
}
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB) {
- block = UDF_I_LOCATION(dir).logicalBlockNum;
- fi = (struct fileIdentDesc *)(UDF_I_DATA(dir) + fibh->soffset -
- udf_ext0_offset(dir) +
- UDF_I_LENEATTR(dir));
+ if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
+ block = dinfo->i_location.logicalBlockNum;
+ fi = (struct fileIdentDesc *)
+ (dinfo->i_ext.i_data +
+ fibh->soffset -
+ udf_ext0_offset(dir) +
+ dinfo->i_lenEAttr);
} else {
- block = eloc.logicalBlockNum + ((elen - 1) >>
- dir->i_sb->s_blocksize_bits);
- fi = (struct fileIdentDesc *)(fibh->sbh->b_data + fibh->soffset);
+ block = eloc.logicalBlockNum +
+ ((elen - 1) >>
+ dir->i_sb->s_blocksize_bits);
+ fi = (struct fileIdentDesc *)
+ (fibh->sbh->b_data + fibh->soffset);
}
} else {
fibh->soffset = fibh->eoffset - sb->s_blocksize;
@@ -509,7 +535,8 @@
block = eloc.logicalBlockNum + ((elen - 1) >>
dir->i_sb->s_blocksize_bits);
- fibh->ebh = udf_bread(dir, f_pos >> (dir->i_sb->s_blocksize_bits - 2), 1, err);
+ fibh->ebh = udf_bread(dir,
+ f_pos >> dir->i_sb->s_blocksize_bits, 1, err);
if (!fibh->ebh) {
brelse(epos.bh);
brelse(fibh->sbh);
@@ -521,32 +548,34 @@
(EXT_RECORDED_ALLOCATED >> 30)) {
block = eloc.logicalBlockNum + ((elen - 1) >>
dir->i_sb->s_blocksize_bits);
- } else {
+ } else
block++;
- }
brelse(fibh->sbh);
fibh->sbh = fibh->ebh;
fi = (struct fileIdentDesc *)(fibh->sbh->b_data);
} else {
fi = (struct fileIdentDesc *)
- (fibh->sbh->b_data + sb->s_blocksize + fibh->soffset);
+ (fibh->sbh->b_data + sb->s_blocksize +
+ fibh->soffset);
}
}
memset(cfi, 0, sizeof(struct fileIdentDesc));
- if (UDF_SB_UDFREV(sb) >= 0x0200)
- udf_new_tag((char *)cfi, TAG_IDENT_FID, 3, 1, block, sizeof(tag));
+ if (UDF_SB(sb)->s_udfrev >= 0x0200)
+ udf_new_tag((char *)cfi, TAG_IDENT_FID, 3, 1, block,
+ sizeof(tag));
else
- udf_new_tag((char *)cfi, TAG_IDENT_FID, 2, 1, block, sizeof(tag));
+ udf_new_tag((char *)cfi, TAG_IDENT_FID, 2, 1, block,
+ sizeof(tag));
cfi->fileVersionNum = cpu_to_le16(1);
cfi->lengthFileIdent = namelen;
cfi->lengthOfImpUse = cpu_to_le16(0);
if (!udf_write_fi(dir, cfi, fi, fibh, NULL, name)) {
brelse(epos.bh);
dir->i_size += nfidlen;
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB)
- UDF_I_LENALLOC(dir) += nfidlen;
+ if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
+ dinfo->i_lenAlloc += nfidlen;
mark_inode_dirty(dir);
return fi;
} else {
@@ -578,6 +607,7 @@
struct inode *inode;
struct fileIdentDesc cfi, *fi;
int err;
+ struct udf_inode_info *iinfo;
lock_kernel();
inode = udf_new_inode(dir, mode, &err);
@@ -586,7 +616,8 @@
return err;
}
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB)
+ iinfo = UDF_I(inode);
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
inode->i_data.a_ops = &udf_adinicb_aops;
else
inode->i_data.a_ops = &udf_aops;
@@ -595,7 +626,8 @@
inode->i_mode = mode;
mark_inode_dirty(inode);
- if (!(fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err))) {
+ fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
+ if (!fi) {
inode->i_nlink--;
mark_inode_dirty(inode);
iput(inode);
@@ -603,13 +635,12 @@
return err;
}
cfi.icb.extLength = cpu_to_le32(inode->i_sb->s_blocksize);
- cfi.icb.extLocation = cpu_to_lelb(UDF_I_LOCATION(inode));
+ cfi.icb.extLocation = cpu_to_lelb(iinfo->i_location);
*(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse =
- cpu_to_le32(UDF_I_UNIQUE(inode) & 0x00000000FFFFFFFFUL);
+ cpu_to_le32(iinfo->i_unique & 0x00000000FFFFFFFFUL);
udf_write_fi(dir, &cfi, fi, &fibh, NULL, NULL);
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB) {
+ if (UDF_I(dir)->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
mark_inode_dirty(dir);
- }
if (fibh.sbh != fibh.ebh)
brelse(fibh.ebh);
brelse(fibh.sbh);
@@ -626,6 +657,7 @@
struct udf_fileident_bh fibh;
struct fileIdentDesc cfi, *fi;
int err;
+ struct udf_inode_info *iinfo;
if (!old_valid_dev(rdev))
return -EINVAL;
@@ -636,9 +668,11 @@
if (!inode)
goto out;
+ iinfo = UDF_I(inode);
inode->i_uid = current->fsuid;
init_special_inode(inode, mode, rdev);
- if (!(fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err))) {
+ fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
+ if (!fi) {
inode->i_nlink--;
mark_inode_dirty(inode);
iput(inode);
@@ -646,13 +680,12 @@
return err;
}
cfi.icb.extLength = cpu_to_le32(inode->i_sb->s_blocksize);
- cfi.icb.extLocation = cpu_to_lelb(UDF_I_LOCATION(inode));
+ cfi.icb.extLocation = cpu_to_lelb(iinfo->i_location);
*(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse =
- cpu_to_le32(UDF_I_UNIQUE(inode) & 0x00000000FFFFFFFFUL);
+ cpu_to_le32(iinfo->i_unique & 0x00000000FFFFFFFFUL);
udf_write_fi(dir, &cfi, fi, &fibh, NULL, NULL);
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB) {
+ if (UDF_I(dir)->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
mark_inode_dirty(dir);
- }
mark_inode_dirty(inode);
if (fibh.sbh != fibh.ebh)
@@ -672,6 +705,8 @@
struct udf_fileident_bh fibh;
struct fileIdentDesc cfi, *fi;
int err;
+ struct udf_inode_info *dinfo = UDF_I(dir);
+ struct udf_inode_info *iinfo;
lock_kernel();
err = -EMLINK;
@@ -683,9 +718,11 @@
if (!inode)
goto out;
+ iinfo = UDF_I(inode);
inode->i_op = &udf_dir_inode_operations;
inode->i_fop = &udf_dir_operations;
- if (!(fi = udf_add_entry(inode, NULL, &fibh, &cfi, &err))) {
+ fi = udf_add_entry(inode, NULL, &fibh, &cfi, &err);
+ if (!fi) {
inode->i_nlink--;
mark_inode_dirty(inode);
iput(inode);
@@ -693,10 +730,11 @@
}
inode->i_nlink = 2;
cfi.icb.extLength = cpu_to_le32(inode->i_sb->s_blocksize);
- cfi.icb.extLocation = cpu_to_lelb(UDF_I_LOCATION(dir));
+ cfi.icb.extLocation = cpu_to_lelb(dinfo->i_location);
*(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse =
- cpu_to_le32(UDF_I_UNIQUE(dir) & 0x00000000FFFFFFFFUL);
- cfi.fileCharacteristics = FID_FILE_CHAR_DIRECTORY | FID_FILE_CHAR_PARENT;
+ cpu_to_le32(dinfo->i_unique & 0x00000000FFFFFFFFUL);
+ cfi.fileCharacteristics =
+ FID_FILE_CHAR_DIRECTORY | FID_FILE_CHAR_PARENT;
udf_write_fi(inode, &cfi, fi, &fibh, NULL, NULL);
brelse(fibh.sbh);
inode->i_mode = S_IFDIR | mode;
@@ -704,16 +742,17 @@
inode->i_mode |= S_ISGID;
mark_inode_dirty(inode);
- if (!(fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err))) {
+ fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
+ if (!fi) {
inode->i_nlink = 0;
mark_inode_dirty(inode);
iput(inode);
goto out;
}
cfi.icb.extLength = cpu_to_le32(inode->i_sb->s_blocksize);
- cfi.icb.extLocation = cpu_to_lelb(UDF_I_LOCATION(inode));
+ cfi.icb.extLocation = cpu_to_lelb(iinfo->i_location);
*(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse =
- cpu_to_le32(UDF_I_UNIQUE(inode) & 0x00000000FFFFFFFFUL);
+ cpu_to_le32(iinfo->i_unique & 0x00000000FFFFFFFFUL);
cfi.fileCharacteristics |= FID_FILE_CHAR_DIRECTORY;
udf_write_fi(dir, &cfi, fi, &fibh, NULL, NULL);
inc_nlink(dir);
@@ -734,32 +773,33 @@
struct fileIdentDesc *fi, cfi;
struct udf_fileident_bh fibh;
loff_t f_pos;
- loff_t size = (udf_ext0_offset(dir) + dir->i_size) >> 2;
+ loff_t size = udf_ext0_offset(dir) + dir->i_size;
int block;
kernel_lb_addr eloc;
uint32_t elen;
sector_t offset;
struct extent_position epos = {};
+ struct udf_inode_info *dinfo = UDF_I(dir);
- f_pos = (udf_ext0_offset(dir) >> 2);
+ f_pos = udf_ext0_offset(dir);
+ fibh.soffset = fibh.eoffset = f_pos & (dir->i_sb->s_blocksize - 1);
- fibh.soffset = fibh.eoffset = (f_pos & ((dir->i_sb->s_blocksize - 1) >> 2)) << 2;
-
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB) {
+ if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
fibh.sbh = fibh.ebh = NULL;
- } else if (inode_bmap(dir, f_pos >> (dir->i_sb->s_blocksize_bits - 2),
- &epos, &eloc, &elen, &offset) == (EXT_RECORDED_ALLOCATED >> 30)) {
+ else if (inode_bmap(dir, f_pos >> dir->i_sb->s_blocksize_bits,
+ &epos, &eloc, &elen, &offset) ==
+ (EXT_RECORDED_ALLOCATED >> 30)) {
block = udf_get_lb_pblock(dir->i_sb, eloc, offset);
if ((++offset << dir->i_sb->s_blocksize_bits) < elen) {
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_SHORT)
+ if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
epos.offset -= sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_LONG)
+ else if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
epos.offset -= sizeof(long_ad);
- } else {
+ } else
offset = 0;
- }
- if (!(fibh.sbh = fibh.ebh = udf_tread(dir->i_sb, block))) {
+ fibh.sbh = fibh.ebh = udf_tread(dir->i_sb, block);
+ if (!fibh.sbh) {
brelse(epos.bh);
return 0;
}
@@ -768,7 +808,7 @@
return 0;
}
- while ((f_pos < size)) {
+ while (f_pos < size) {
fi = udf_fileident_read(dir, &f_pos, &fibh, &cfi, &epos, &eloc,
&elen, &offset);
if (!fi) {
@@ -828,7 +868,8 @@
clear_nlink(inode);
inode->i_size = 0;
inode_dec_link_count(dir);
- inode->i_ctime = dir->i_ctime = dir->i_mtime = current_fs_time(dir->i_sb);
+ inode->i_ctime = dir->i_ctime = dir->i_mtime =
+ current_fs_time(dir->i_sb);
mark_inode_dirty(dir);
end_rmdir:
@@ -901,36 +942,42 @@
int block;
char name[UDF_NAME_LEN];
int namelen;
+ struct buffer_head *bh;
+ struct udf_inode_info *iinfo;
lock_kernel();
- if (!(inode = udf_new_inode(dir, S_IFLNK, &err)))
+ inode = udf_new_inode(dir, S_IFLNK, &err);
+ if (!inode)
goto out;
+ iinfo = UDF_I(inode);
inode->i_mode = S_IFLNK | S_IRWXUGO;
inode->i_data.a_ops = &udf_symlink_aops;
inode->i_op = &page_symlink_inode_operations;
- if (UDF_I_ALLOCTYPE(inode) != ICBTAG_FLAG_AD_IN_ICB) {
+ if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB) {
kernel_lb_addr eloc;
uint32_t elen;
block = udf_new_block(inode->i_sb, inode,
- UDF_I_LOCATION(inode).partitionReferenceNum,
- UDF_I_LOCATION(inode).logicalBlockNum, &err);
+ iinfo->i_location.partitionReferenceNum,
+ iinfo->i_location.logicalBlockNum, &err);
if (!block)
goto out_no_entry;
- epos.block = UDF_I_LOCATION(inode);
+ epos.block = iinfo->i_location;
epos.offset = udf_file_entry_alloc_offset(inode);
epos.bh = NULL;
eloc.logicalBlockNum = block;
- eloc.partitionReferenceNum = UDF_I_LOCATION(inode).partitionReferenceNum;
+ eloc.partitionReferenceNum =
+ iinfo->i_location.partitionReferenceNum;
elen = inode->i_sb->s_blocksize;
- UDF_I_LENEXTENTS(inode) = elen;
+ iinfo->i_lenExtents = elen;
udf_add_aext(inode, &epos, eloc, elen, 0);
brelse(epos.bh);
block = udf_get_pblock(inode->i_sb, block,
- UDF_I_LOCATION(inode).partitionReferenceNum, 0);
+ iinfo->i_location.partitionReferenceNum,
+ 0);
epos.bh = udf_tread(inode->i_sb, block);
lock_buffer(epos.bh);
memset(epos.bh->b_data, 0x00, inode->i_sb->s_blocksize);
@@ -938,9 +985,8 @@
unlock_buffer(epos.bh);
mark_buffer_dirty_inode(epos.bh, inode);
ea = epos.bh->b_data + udf_ext0_offset(inode);
- } else {
- ea = UDF_I_DATA(inode) + UDF_I_LENEATTR(inode);
- }
+ } else
+ ea = iinfo->i_ext.i_data + iinfo->i_lenEAttr;
eoffset = inode->i_sb->s_blocksize - udf_ext0_offset(inode);
pc = (struct pathComponent *)ea;
@@ -977,7 +1023,8 @@
if (compstart[0] == '.') {
if ((symname - compstart) == 1)
pc->componentType = 4;
- else if ((symname - compstart) == 2 && compstart[1] == '.')
+ else if ((symname - compstart) == 2 &&
+ compstart[1] == '.')
pc->componentType = 3;
}
@@ -987,7 +1034,8 @@
if (!namelen)
goto out_no_entry;
- if (elen + sizeof(struct pathComponent) + namelen > eoffset)
+ if (elen + sizeof(struct pathComponent) + namelen >
+ eoffset)
goto out_no_entry;
else
pc->lengthComponentIdent = namelen;
@@ -1006,30 +1054,34 @@
brelse(epos.bh);
inode->i_size = elen;
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB)
- UDF_I_LENALLOC(inode) = inode->i_size;
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
+ iinfo->i_lenAlloc = inode->i_size;
mark_inode_dirty(inode);
- if (!(fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err)))
+ fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
+ if (!fi)
goto out_no_entry;
cfi.icb.extLength = cpu_to_le32(inode->i_sb->s_blocksize);
- cfi.icb.extLocation = cpu_to_lelb(UDF_I_LOCATION(inode));
- if (UDF_SB_LVIDBH(inode->i_sb)) {
+ cfi.icb.extLocation = cpu_to_lelb(iinfo->i_location);
+ bh = UDF_SB(inode->i_sb)->s_lvid_bh;
+ if (bh) {
+ struct logicalVolIntegrityDesc *lvid =
+ (struct logicalVolIntegrityDesc *)bh->b_data;
struct logicalVolHeaderDesc *lvhd;
uint64_t uniqueID;
- lvhd = (struct logicalVolHeaderDesc *)(UDF_SB_LVID(inode->i_sb)->logicalVolContentsUse);
+ lvhd = (struct logicalVolHeaderDesc *)
+ lvid->logicalVolContentsUse;
uniqueID = le64_to_cpu(lvhd->uniqueID);
*(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse =
cpu_to_le32(uniqueID & 0x00000000FFFFFFFFUL);
if (!(++uniqueID & 0x00000000FFFFFFFFUL))
uniqueID += 16;
lvhd->uniqueID = cpu_to_le64(uniqueID);
- mark_buffer_dirty(UDF_SB_LVIDBH(inode->i_sb));
+ mark_buffer_dirty(bh);
}
udf_write_fi(dir, &cfi, fi, &fibh, NULL, NULL);
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB) {
+ if (UDF_I(dir)->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
mark_inode_dirty(dir);
- }
if (fibh.sbh != fibh.ebh)
brelse(fibh.ebh);
brelse(fibh.sbh);
@@ -1053,6 +1105,7 @@
struct udf_fileident_bh fibh;
struct fileIdentDesc cfi, *fi;
int err;
+ struct buffer_head *bh;
lock_kernel();
if (inode->i_nlink >= (256 << sizeof(inode->i_nlink)) - 1) {
@@ -1060,28 +1113,32 @@
return -EMLINK;
}
- if (!(fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err))) {
+ fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
+ if (!fi) {
unlock_kernel();
return err;
}
cfi.icb.extLength = cpu_to_le32(inode->i_sb->s_blocksize);
- cfi.icb.extLocation = cpu_to_lelb(UDF_I_LOCATION(inode));
- if (UDF_SB_LVIDBH(inode->i_sb)) {
+ cfi.icb.extLocation = cpu_to_lelb(UDF_I(inode)->i_location);
+ bh = UDF_SB(inode->i_sb)->s_lvid_bh;
+ if (bh) {
+ struct logicalVolIntegrityDesc *lvid =
+ (struct logicalVolIntegrityDesc *)bh->b_data;
struct logicalVolHeaderDesc *lvhd;
uint64_t uniqueID;
- lvhd = (struct logicalVolHeaderDesc *)(UDF_SB_LVID(inode->i_sb)->logicalVolContentsUse);
+ lvhd = (struct logicalVolHeaderDesc *)
+ (lvid->logicalVolContentsUse);
uniqueID = le64_to_cpu(lvhd->uniqueID);
*(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse =
cpu_to_le32(uniqueID & 0x00000000FFFFFFFFUL);
if (!(++uniqueID & 0x00000000FFFFFFFFUL))
uniqueID += 16;
lvhd->uniqueID = cpu_to_le64(uniqueID);
- mark_buffer_dirty(UDF_SB_LVIDBH(inode->i_sb));
+ mark_buffer_dirty(bh);
}
udf_write_fi(dir, &cfi, fi, &fibh, NULL, NULL);
- if (UDF_I_ALLOCTYPE(dir) == ICBTAG_FLAG_AD_IN_ICB) {
+ if (UDF_I(dir)->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
mark_inode_dirty(dir);
- }
if (fibh.sbh != fibh.ebh)
brelse(fibh.ebh);
@@ -1105,13 +1162,16 @@
struct inode *old_inode = old_dentry->d_inode;
struct inode *new_inode = new_dentry->d_inode;
struct udf_fileident_bh ofibh, nfibh;
- struct fileIdentDesc *ofi = NULL, *nfi = NULL, *dir_fi = NULL, ocfi, ncfi;
+ struct fileIdentDesc *ofi = NULL, *nfi = NULL, *dir_fi = NULL;
+ struct fileIdentDesc ocfi, ncfi;
struct buffer_head *dir_bh = NULL;
int retval = -ENOENT;
kernel_lb_addr tloc;
+ struct udf_inode_info *old_iinfo = UDF_I(old_inode);
lock_kernel();
- if ((ofi = udf_find_entry(old_dir, old_dentry, &ofibh, &ocfi))) {
+ ofi = udf_find_entry(old_dir, old_dentry, &ofibh, &ocfi);
+ if (ofi) {
if (ofibh.sbh != ofibh.ebh)
brelse(ofibh.ebh);
brelse(ofibh.sbh);
@@ -1131,7 +1191,7 @@
}
}
if (S_ISDIR(old_inode->i_mode)) {
- uint32_t offset = udf_ext0_offset(old_inode);
+ int offset = udf_ext0_offset(old_inode);
if (new_inode) {
retval = -ENOTEMPTY;
@@ -1139,30 +1199,36 @@
goto end_rename;
}
retval = -EIO;
- if (UDF_I_ALLOCTYPE(old_inode) == ICBTAG_FLAG_AD_IN_ICB) {
- dir_fi = udf_get_fileident(UDF_I_DATA(old_inode) -
- (UDF_I_EFE(old_inode) ?
- sizeof(struct extendedFileEntry) :
- sizeof(struct fileEntry)),
- old_inode->i_sb->s_blocksize, &offset);
+ if (old_iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
+ dir_fi = udf_get_fileident(
+ old_iinfo->i_ext.i_data -
+ (old_iinfo->i_efe ?
+ sizeof(struct extendedFileEntry) :
+ sizeof(struct fileEntry)),
+ old_inode->i_sb->s_blocksize, &offset);
} else {
dir_bh = udf_bread(old_inode, 0, 0, &retval);
if (!dir_bh)
goto end_rename;
- dir_fi = udf_get_fileident(dir_bh->b_data, old_inode->i_sb->s_blocksize, &offset);
+ dir_fi = udf_get_fileident(dir_bh->b_data,
+ old_inode->i_sb->s_blocksize, &offset);
}
if (!dir_fi)
goto end_rename;
tloc = lelb_to_cpu(dir_fi->icb.extLocation);
- if (udf_get_lb_pblock(old_inode->i_sb, tloc, 0) != old_dir->i_ino)
+ if (udf_get_lb_pblock(old_inode->i_sb, tloc, 0) !=
+ old_dir->i_ino)
goto end_rename;
retval = -EMLINK;
- if (!new_inode && new_dir->i_nlink >= (256 << sizeof(new_dir->i_nlink)) - 1)
+ if (!new_inode &&
+ new_dir->i_nlink >=
+ (256 << sizeof(new_dir->i_nlink)) - 1)
goto end_rename;
}
if (!nfi) {
- nfi = udf_add_entry(new_dir, new_dentry, &nfibh, &ncfi, &retval);
+ nfi = udf_add_entry(new_dir, new_dentry, &nfibh, &ncfi,
+ &retval);
if (!nfi)
goto end_rename;
}
@@ -1194,18 +1260,19 @@
mark_inode_dirty(old_dir);
if (dir_fi) {
- dir_fi->icb.extLocation = cpu_to_lelb(UDF_I_LOCATION(new_dir));
- udf_update_tag((char *)dir_fi, (sizeof(struct fileIdentDesc) +
- le16_to_cpu(dir_fi->lengthOfImpUse) + 3) & ~3);
- if (UDF_I_ALLOCTYPE(old_inode) == ICBTAG_FLAG_AD_IN_ICB) {
+ dir_fi->icb.extLocation = cpu_to_lelb(UDF_I(new_dir)->i_location);
+ udf_update_tag((char *)dir_fi,
+ (sizeof(struct fileIdentDesc) +
+ le16_to_cpu(dir_fi->lengthOfImpUse) + 3) & ~3);
+ if (old_iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB)
mark_inode_dirty(old_inode);
- } else {
+ else
mark_buffer_dirty_inode(dir_bh, old_inode);
- }
+
inode_dec_link_count(old_dir);
- if (new_inode) {
+ if (new_inode)
inode_dec_link_count(new_inode);
- } else {
+ else {
inc_nlink(new_dir);
mark_inode_dirty(new_dir);
}
diff --git a/fs/udf/partition.c b/fs/udf/partition.c
index aaab24c..fc53334 100644
--- a/fs/udf/partition.c
+++ b/fs/udf/partition.c
@@ -31,15 +31,18 @@
inline uint32_t udf_get_pblock(struct super_block *sb, uint32_t block,
uint16_t partition, uint32_t offset)
{
- if (partition >= UDF_SB_NUMPARTS(sb)) {
- udf_debug("block=%d, partition=%d, offset=%d: invalid partition\n",
- block, partition, offset);
+ struct udf_sb_info *sbi = UDF_SB(sb);
+ struct udf_part_map *map;
+ if (partition >= sbi->s_partitions) {
+ udf_debug("block=%d, partition=%d, offset=%d: "
+ "invalid partition\n", block, partition, offset);
return 0xFFFFFFFF;
}
- if (UDF_SB_PARTFUNC(sb, partition))
- return UDF_SB_PARTFUNC(sb, partition)(sb, block, partition, offset);
+ map = &sbi->s_partmaps[partition];
+ if (map->s_partition_func)
+ return map->s_partition_func(sb, block, partition, offset);
else
- return UDF_SB_PARTROOT(sb, partition) + block + offset;
+ return map->s_partition_root + block + offset;
}
uint32_t udf_get_pblock_virt15(struct super_block *sb, uint32_t block,
@@ -49,12 +52,18 @@
uint32_t newblock;
uint32_t index;
uint32_t loc;
+ struct udf_sb_info *sbi = UDF_SB(sb);
+ struct udf_part_map *map;
+ struct udf_virtual_data *vdata;
+ struct udf_inode_info *iinfo;
- index = (sb->s_blocksize - UDF_SB_TYPEVIRT(sb,partition).s_start_offset) / sizeof(uint32_t);
+ map = &sbi->s_partmaps[partition];
+ vdata = &map->s_type_specific.s_virtual;
+ index = (sb->s_blocksize - vdata->s_start_offset) / sizeof(uint32_t);
- if (block > UDF_SB_TYPEVIRT(sb,partition).s_num_entries) {
- udf_debug("Trying to access block beyond end of VAT (%d max %d)\n",
- block, UDF_SB_TYPEVIRT(sb,partition).s_num_entries);
+ if (block > vdata->s_num_entries) {
+ udf_debug("Trying to access block beyond end of VAT "
+ "(%d max %d)\n", block, vdata->s_num_entries);
return 0xFFFFFFFF;
}
@@ -64,12 +73,13 @@
index = block % (sb->s_blocksize / sizeof(uint32_t));
} else {
newblock = 0;
- index = UDF_SB_TYPEVIRT(sb,partition).s_start_offset / sizeof(uint32_t) + block;
+ index = vdata->s_start_offset / sizeof(uint32_t) + block;
}
- loc = udf_block_map(UDF_SB_VAT(sb), newblock);
+ loc = udf_block_map(sbi->s_vat_inode, newblock);
- if (!(bh = sb_bread(sb, loc))) {
+ bh = sb_bread(sb, loc);
+ if (!bh) {
udf_debug("get_pblock(UDF_VIRTUAL_MAP:%p,%d,%d) VAT: %d[%d]\n",
sb, block, partition, loc, index);
return 0xFFFFFFFF;
@@ -79,50 +89,61 @@
brelse(bh);
- if (UDF_I_LOCATION(UDF_SB_VAT(sb)).partitionReferenceNum == partition) {
+ iinfo = UDF_I(sbi->s_vat_inode);
+ if (iinfo->i_location.partitionReferenceNum == partition) {
udf_debug("recursive call to udf_get_pblock!\n");
return 0xFFFFFFFF;
}
return udf_get_pblock(sb, loc,
- UDF_I_LOCATION(UDF_SB_VAT(sb)).partitionReferenceNum,
+ iinfo->i_location.partitionReferenceNum,
offset);
}
-inline uint32_t udf_get_pblock_virt20(struct super_block * sb, uint32_t block,
+inline uint32_t udf_get_pblock_virt20(struct super_block *sb, uint32_t block,
uint16_t partition, uint32_t offset)
{
return udf_get_pblock_virt15(sb, block, partition, offset);
}
-uint32_t udf_get_pblock_spar15(struct super_block * sb, uint32_t block,
+uint32_t udf_get_pblock_spar15(struct super_block *sb, uint32_t block,
uint16_t partition, uint32_t offset)
{
int i;
struct sparingTable *st = NULL;
- uint32_t packet = (block + offset) & ~(UDF_SB_TYPESPAR(sb,partition).s_packet_len - 1);
+ struct udf_sb_info *sbi = UDF_SB(sb);
+ struct udf_part_map *map;
+ uint32_t packet;
+ struct udf_sparing_data *sdata;
+
+ map = &sbi->s_partmaps[partition];
+ sdata = &map->s_type_specific.s_sparing;
+ packet = (block + offset) & ~(sdata->s_packet_len - 1);
for (i = 0; i < 4; i++) {
- if (UDF_SB_TYPESPAR(sb,partition).s_spar_map[i] != NULL) {
- st = (struct sparingTable *)UDF_SB_TYPESPAR(sb,partition).s_spar_map[i]->b_data;
+ if (sdata->s_spar_map[i] != NULL) {
+ st = (struct sparingTable *)
+ sdata->s_spar_map[i]->b_data;
break;
}
}
if (st) {
for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) {
- if (le32_to_cpu(st->mapEntry[i].origLocation) >= 0xFFFFFFF0) {
+ struct sparingEntry *entry = &st->mapEntry[i];
+ u32 origLoc = le32_to_cpu(entry->origLocation);
+ if (origLoc >= 0xFFFFFFF0)
break;
- } else if (le32_to_cpu(st->mapEntry[i].origLocation) == packet) {
- return le32_to_cpu(st->mapEntry[i].mappedLocation) +
- ((block + offset) & (UDF_SB_TYPESPAR(sb,partition).s_packet_len - 1));
- } else if (le32_to_cpu(st->mapEntry[i].origLocation) > packet) {
+ else if (origLoc == packet)
+ return le32_to_cpu(entry->mappedLocation) +
+ ((block + offset) &
+ (sdata->s_packet_len - 1));
+ else if (origLoc > packet)
break;
- }
}
}
- return UDF_SB_PARTROOT(sb,partition) + block + offset;
+ return map->s_partition_root + block + offset;
}
int udf_relocate_blocks(struct super_block *sb, long old_block, long *new_block)
@@ -132,69 +153,109 @@
struct sparingEntry mapEntry;
uint32_t packet;
int i, j, k, l;
+ struct udf_sb_info *sbi = UDF_SB(sb);
+ u16 reallocationTableLen;
+ struct buffer_head *bh;
- for (i = 0; i < UDF_SB_NUMPARTS(sb); i++) {
- if (old_block > UDF_SB_PARTROOT(sb,i) &&
- old_block < UDF_SB_PARTROOT(sb,i) + UDF_SB_PARTLEN(sb,i)) {
- sdata = &UDF_SB_TYPESPAR(sb,i);
- packet = (old_block - UDF_SB_PARTROOT(sb,i)) & ~(sdata->s_packet_len - 1);
+ for (i = 0; i < sbi->s_partitions; i++) {
+ struct udf_part_map *map = &sbi->s_partmaps[i];
+ if (old_block > map->s_partition_root &&
+ old_block < map->s_partition_root + map->s_partition_len) {
+ sdata = &map->s_type_specific.s_sparing;
+ packet = (old_block - map->s_partition_root) &
+ ~(sdata->s_packet_len - 1);
- for (j = 0; j < 4; j++) {
- if (UDF_SB_TYPESPAR(sb,i).s_spar_map[j] != NULL) {
- st = (struct sparingTable *)sdata->s_spar_map[j]->b_data;
+ for (j = 0; j < 4; j++)
+ if (sdata->s_spar_map[j] != NULL) {
+ st = (struct sparingTable *)
+ sdata->s_spar_map[j]->b_data;
break;
}
- }
if (!st)
return 1;
- for (k = 0; k < le16_to_cpu(st->reallocationTableLen); k++) {
- if (le32_to_cpu(st->mapEntry[k].origLocation) == 0xFFFFFFFF) {
+ reallocationTableLen =
+ le16_to_cpu(st->reallocationTableLen);
+ for (k = 0; k < reallocationTableLen; k++) {
+ struct sparingEntry *entry = &st->mapEntry[k];
+ u32 origLoc = le32_to_cpu(entry->origLocation);
+
+ if (origLoc == 0xFFFFFFFF) {
for (; j < 4; j++) {
- if (sdata->s_spar_map[j]) {
- st = (struct sparingTable *)sdata->s_spar_map[j]->b_data;
- st->mapEntry[k].origLocation = cpu_to_le32(packet);
- udf_update_tag((char *)st, sizeof(struct sparingTable) + le16_to_cpu(st->reallocationTableLen) * sizeof(struct sparingEntry));
- mark_buffer_dirty(sdata->s_spar_map[j]);
- }
+ int len;
+ bh = sdata->s_spar_map[j];
+ if (!bh)
+ continue;
+
+ st = (struct sparingTable *)
+ bh->b_data;
+ entry->origLocation =
+ cpu_to_le32(packet);
+ len =
+ sizeof(struct sparingTable) +
+ reallocationTableLen *
+ sizeof(struct sparingEntry);
+ udf_update_tag((char *)st, len);
+ mark_buffer_dirty(bh);
}
- *new_block = le32_to_cpu(st->mapEntry[k].mappedLocation) +
- ((old_block - UDF_SB_PARTROOT(sb,i)) & (sdata->s_packet_len - 1));
+ *new_block = le32_to_cpu(
+ entry->mappedLocation) +
+ ((old_block -
+ map->s_partition_root) &
+ (sdata->s_packet_len - 1));
return 0;
- } else if (le32_to_cpu(st->mapEntry[k].origLocation) == packet) {
- *new_block = le32_to_cpu(st->mapEntry[k].mappedLocation) +
- ((old_block - UDF_SB_PARTROOT(sb,i)) & (sdata->s_packet_len - 1));
+ } else if (origLoc == packet) {
+ *new_block = le32_to_cpu(
+ entry->mappedLocation) +
+ ((old_block -
+ map->s_partition_root) &
+ (sdata->s_packet_len - 1));
return 0;
- } else if (le32_to_cpu(st->mapEntry[k].origLocation) > packet) {
+ } else if (origLoc > packet)
break;
- }
}
- for (l = k; l < le16_to_cpu(st->reallocationTableLen); l++) {
- if (le32_to_cpu(st->mapEntry[l].origLocation) == 0xFFFFFFFF) {
- for (; j < 4; j++) {
- if (sdata->s_spar_map[j]) {
- st = (struct sparingTable *)sdata->s_spar_map[j]->b_data;
- mapEntry = st->mapEntry[l];
- mapEntry.origLocation = cpu_to_le32(packet);
- memmove(&st->mapEntry[k + 1], &st->mapEntry[k], (l - k) * sizeof(struct sparingEntry));
- st->mapEntry[k] = mapEntry;
- udf_update_tag((char *)st, sizeof(struct sparingTable) + le16_to_cpu(st->reallocationTableLen) * sizeof(struct sparingEntry));
- mark_buffer_dirty(sdata->s_spar_map[j]);
- }
- }
- *new_block = le32_to_cpu(st->mapEntry[k].mappedLocation) +
- ((old_block - UDF_SB_PARTROOT(sb,i)) & (sdata->s_packet_len - 1));
- return 0;
+ for (l = k; l < reallocationTableLen; l++) {
+ struct sparingEntry *entry = &st->mapEntry[l];
+ u32 origLoc = le32_to_cpu(entry->origLocation);
+
+ if (origLoc != 0xFFFFFFFF)
+ continue;
+
+ for (; j < 4; j++) {
+ bh = sdata->s_spar_map[j];
+ if (!bh)
+ continue;
+
+ st = (struct sparingTable *)bh->b_data;
+ mapEntry = st->mapEntry[l];
+ mapEntry.origLocation =
+ cpu_to_le32(packet);
+ memmove(&st->mapEntry[k + 1],
+ &st->mapEntry[k],
+ (l - k) *
+ sizeof(struct sparingEntry));
+ st->mapEntry[k] = mapEntry;
+ udf_update_tag((char *)st,
+ sizeof(struct sparingTable) +
+ reallocationTableLen *
+ sizeof(struct sparingEntry));
+ mark_buffer_dirty(bh);
}
+ *new_block =
+ le32_to_cpu(
+ st->mapEntry[k].mappedLocation) +
+ ((old_block - map->s_partition_root) &
+ (sdata->s_packet_len - 1));
+ return 0;
}
return 1;
} /* if old_block */
}
- if (i == UDF_SB_NUMPARTS(sb)) {
+ if (i == sbi->s_partitions) {
/* outside of partitions */
/* for now, fail =) */
return 1;
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 4360c7a..f3ac4ab 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -33,8 +33,8 @@
* 10/17/98 added freespace count for "df"
* 11/11/98 gr added novrs option
* 11/26/98 dgb added fileset,anchor mount options
- * 12/06/98 blf really hosed things royally. vat/sparing support. sequenced vol descs
- * rewrote option handling based on isofs
+ * 12/06/98 blf really hosed things royally. vat/sparing support. sequenced
+ * vol descs. rewrote option handling based on isofs
* 12/20/98 find the free space bitmap (if it exists)
*/
@@ -52,6 +52,9 @@
#include <linux/buffer_head.h>
#include <linux/vfs.h>
#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/mount.h>
+#include <linux/seq_file.h>
#include <asm/byteorder.h>
#include <linux/udf_fs.h>
@@ -70,6 +73,8 @@
#define VDS_POS_TERMINATING_DESC 6
#define VDS_POS_LENGTH 7
+#define UDF_DEFAULT_BLOCKSIZE 2048
+
static char error_buf[1024];
/* These are the "meat" - everything else is stuffing */
@@ -94,6 +99,17 @@
static void udf_close_lvid(struct super_block *);
static unsigned int udf_count_free(struct super_block *);
static int udf_statfs(struct dentry *, struct kstatfs *);
+static int udf_show_options(struct seq_file *, struct vfsmount *);
+
+struct logicalVolIntegrityDescImpUse *udf_sb_lvidiu(struct udf_sb_info *sbi)
+{
+ struct logicalVolIntegrityDesc *lvid =
+ (struct logicalVolIntegrityDesc *)sbi->s_lvid_bh->b_data;
+ __u32 number_of_partitions = le32_to_cpu(lvid->numOfPartitions);
+ __u32 offset = number_of_partitions * 2 *
+ sizeof(uint32_t)/sizeof(uint8_t);
+ return (struct logicalVolIntegrityDescImpUse *)&(lvid->impUse[offset]);
+}
/* UDF filesystem type */
static int udf_get_sb(struct file_system_type *fs_type,
@@ -116,7 +132,7 @@
static struct inode *udf_alloc_inode(struct super_block *sb)
{
struct udf_inode_info *ei;
- ei = (struct udf_inode_info *)kmem_cache_alloc(udf_inode_cachep, GFP_KERNEL);
+ ei = kmem_cache_alloc(udf_inode_cachep, GFP_KERNEL);
if (!ei)
return NULL;
@@ -170,6 +186,7 @@
.write_super = udf_write_super,
.statfs = udf_statfs,
.remount_fs = udf_remount_fs,
+ .show_options = udf_show_options,
};
struct udf_options {
@@ -218,6 +235,79 @@
module_init(init_udf_fs)
module_exit(exit_udf_fs)
+static int udf_sb_alloc_partition_maps(struct super_block *sb, u32 count)
+{
+ struct udf_sb_info *sbi = UDF_SB(sb);
+
+ sbi->s_partmaps = kcalloc(count, sizeof(struct udf_part_map),
+ GFP_KERNEL);
+ if (!sbi->s_partmaps) {
+ udf_error(sb, __FUNCTION__,
+ "Unable to allocate space for %d partition maps",
+ count);
+ sbi->s_partitions = 0;
+ return -ENOMEM;
+ }
+
+ sbi->s_partitions = count;
+ return 0;
+}
+
+static int udf_show_options(struct seq_file *seq, struct vfsmount *mnt)
+{
+ struct super_block *sb = mnt->mnt_sb;
+ struct udf_sb_info *sbi = UDF_SB(sb);
+
+ if (!UDF_QUERY_FLAG(sb, UDF_FLAG_STRICT))
+ seq_puts(seq, ",nostrict");
+ if (sb->s_blocksize != UDF_DEFAULT_BLOCKSIZE)
+ seq_printf(seq, ",bs=%lu", sb->s_blocksize);
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_UNHIDE))
+ seq_puts(seq, ",unhide");
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_UNDELETE))
+ seq_puts(seq, ",undelete");
+ if (!UDF_QUERY_FLAG(sb, UDF_FLAG_USE_AD_IN_ICB))
+ seq_puts(seq, ",noadinicb");
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_USE_SHORT_AD))
+ seq_puts(seq, ",shortad");
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_UID_FORGET))
+ seq_puts(seq, ",uid=forget");
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_UID_IGNORE))
+ seq_puts(seq, ",uid=ignore");
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_GID_FORGET))
+ seq_puts(seq, ",gid=forget");
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_GID_IGNORE))
+ seq_puts(seq, ",gid=ignore");
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_UID_SET))
+ seq_printf(seq, ",uid=%u", sbi->s_uid);
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_GID_SET))
+ seq_printf(seq, ",gid=%u", sbi->s_gid);
+ if (sbi->s_umask != 0)
+ seq_printf(seq, ",umask=%o", sbi->s_umask);
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_SESSION_SET))
+ seq_printf(seq, ",session=%u", sbi->s_session);
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_LASTBLOCK_SET))
+ seq_printf(seq, ",lastblock=%u", sbi->s_last_block);
+ /*
+ * s_anchor[2] could be zeroed out in case there is no anchor
+ * in the specified block, but then the "anchor=N" option
+ * originally given by the user wasn't effective, so it's OK
+ * if we don't show it.
+ */
+ if (sbi->s_anchor[2] != 0)
+ seq_printf(seq, ",anchor=%u", sbi->s_anchor[2]);
+ /*
+ * volume, partition, fileset and rootdir seem to be ignored
+ * currently
+ */
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_UTF8))
+ seq_puts(seq, ",utf8");
+ if (UDF_QUERY_FLAG(sb, UDF_FLAG_NLS_MAP) && sbi->s_nls_map)
+ seq_printf(seq, ",iocharset=%s", sbi->s_nls_map->charset);
+
+ return 0;
+}
+
/*
* udf_parse_options
*
@@ -310,13 +400,14 @@
{Opt_err, NULL}
};
-static int udf_parse_options(char *options, struct udf_options *uopt)
+static int udf_parse_options(char *options, struct udf_options *uopt,
+ bool remount)
{
char *p;
int option;
uopt->novrs = 0;
- uopt->blocksize = 2048;
+ uopt->blocksize = UDF_DEFAULT_BLOCKSIZE;
uopt->partition = 0xFFFF;
uopt->session = 0xFFFFFFFF;
uopt->lastblock = 0;
@@ -386,11 +477,15 @@
if (match_int(args, &option))
return 0;
uopt->session = option;
+ if (!remount)
+ uopt->flags |= (1 << UDF_FLAG_SESSION_SET);
break;
case Opt_lastblock:
if (match_int(args, &option))
return 0;
uopt->lastblock = option;
+ if (!remount)
+ uopt->flags |= (1 << UDF_FLAG_LASTBLOCK_SET);
break;
case Opt_anchor:
if (match_int(args, &option))
@@ -447,7 +542,7 @@
return 1;
}
-void udf_write_super(struct super_block *sb)
+static void udf_write_super(struct super_block *sb)
{
lock_kernel();
@@ -461,22 +556,23 @@
static int udf_remount_fs(struct super_block *sb, int *flags, char *options)
{
struct udf_options uopt;
+ struct udf_sb_info *sbi = UDF_SB(sb);
- uopt.flags = UDF_SB(sb)->s_flags;
- uopt.uid = UDF_SB(sb)->s_uid;
- uopt.gid = UDF_SB(sb)->s_gid;
- uopt.umask = UDF_SB(sb)->s_umask;
+ uopt.flags = sbi->s_flags;
+ uopt.uid = sbi->s_uid;
+ uopt.gid = sbi->s_gid;
+ uopt.umask = sbi->s_umask;
- if (!udf_parse_options(options, &uopt))
+ if (!udf_parse_options(options, &uopt, true))
return -EINVAL;
- UDF_SB(sb)->s_flags = uopt.flags;
- UDF_SB(sb)->s_uid = uopt.uid;
- UDF_SB(sb)->s_gid = uopt.gid;
- UDF_SB(sb)->s_umask = uopt.umask;
+ sbi->s_flags = uopt.flags;
+ sbi->s_uid = uopt.uid;
+ sbi->s_gid = uopt.gid;
+ sbi->s_umask = uopt.umask;
- if (UDF_SB_LVIDBH(sb)) {
- int write_rev = le16_to_cpu(UDF_SB_LVIDIU(sb)->minUDFWriteRev);
+ if (sbi->s_lvid_bh) {
+ int write_rev = le16_to_cpu(udf_sb_lvidiu(sbi)->minUDFWriteRev);
if (write_rev > UDF_MAX_WRITE_VERSION)
*flags |= MS_RDONLY;
}
@@ -538,17 +634,19 @@
int iso9660 = 0;
int nsr02 = 0;
int nsr03 = 0;
+ struct udf_sb_info *sbi;
/* Block size must be a multiple of 512 */
if (sb->s_blocksize & 511)
return 0;
+ sbi = UDF_SB(sb);
if (sb->s_blocksize < sizeof(struct volStructDesc))
sectorsize = sizeof(struct volStructDesc);
else
sectorsize = sb->s_blocksize;
- sector += (UDF_SB_SESSION(sb) << sb->s_blocksize_bits);
+ sector += (sbi->s_session << sb->s_blocksize_bits);
udf_debug("Starting at sector %u (%ld byte sectors)\n",
(sector >> sb->s_blocksize_bits), sb->s_blocksize);
@@ -561,47 +659,52 @@
/* Look for ISO descriptors */
vsd = (struct volStructDesc *)(bh->b_data +
- (sector & (sb->s_blocksize - 1)));
+ (sector & (sb->s_blocksize - 1)));
if (vsd->stdIdent[0] == 0) {
brelse(bh);
break;
- } else if (!strncmp(vsd->stdIdent, VSD_STD_ID_CD001, VSD_STD_ID_LEN)) {
+ } else if (!strncmp(vsd->stdIdent, VSD_STD_ID_CD001,
+ VSD_STD_ID_LEN)) {
iso9660 = sector;
switch (vsd->structType) {
case 0:
udf_debug("ISO9660 Boot Record found\n");
break;
case 1:
- udf_debug
- ("ISO9660 Primary Volume Descriptor found\n");
+ udf_debug("ISO9660 Primary Volume Descriptor "
+ "found\n");
break;
case 2:
- udf_debug
- ("ISO9660 Supplementary Volume Descriptor found\n");
+ udf_debug("ISO9660 Supplementary Volume "
+ "Descriptor found\n");
break;
case 3:
- udf_debug
- ("ISO9660 Volume Partition Descriptor found\n");
+ udf_debug("ISO9660 Volume Partition Descriptor "
+ "found\n");
break;
case 255:
- udf_debug
- ("ISO9660 Volume Descriptor Set Terminator found\n");
+ udf_debug("ISO9660 Volume Descriptor Set "
+ "Terminator found\n");
break;
default:
udf_debug("ISO9660 VRS (%u) found\n",
vsd->structType);
break;
}
- } else if (!strncmp(vsd->stdIdent, VSD_STD_ID_BEA01, VSD_STD_ID_LEN)) {
- } else if (!strncmp(vsd->stdIdent, VSD_STD_ID_TEA01, VSD_STD_ID_LEN)) {
+ } else if (!strncmp(vsd->stdIdent, VSD_STD_ID_BEA01,
+ VSD_STD_ID_LEN))
+ ; /* nothing */
+ else if (!strncmp(vsd->stdIdent, VSD_STD_ID_TEA01,
+ VSD_STD_ID_LEN)) {
brelse(bh);
break;
- } else if (!strncmp(vsd->stdIdent, VSD_STD_ID_NSR02, VSD_STD_ID_LEN)) {
+ } else if (!strncmp(vsd->stdIdent, VSD_STD_ID_NSR02,
+ VSD_STD_ID_LEN))
nsr02 = sector;
- } else if (!strncmp(vsd->stdIdent, VSD_STD_ID_NSR03, VSD_STD_ID_LEN)) {
+ else if (!strncmp(vsd->stdIdent, VSD_STD_ID_NSR03,
+ VSD_STD_ID_LEN))
nsr03 = sector;
- }
brelse(bh);
}
@@ -609,7 +712,7 @@
return nsr03;
else if (nsr02)
return nsr02;
- else if (sector - (UDF_SB_SESSION(sb) << sb->s_blocksize_bits) == 32768)
+ else if (sector - (sbi->s_session << sb->s_blocksize_bits) == 32768)
return -1;
else
return 0;
@@ -634,11 +737,15 @@
*/
static void udf_find_anchor(struct super_block *sb)
{
- int lastblock = UDF_SB_LASTBLOCK(sb);
+ int lastblock;
struct buffer_head *bh = NULL;
uint16_t ident;
uint32_t location;
int i;
+ struct udf_sb_info *sbi;
+
+ sbi = UDF_SB(sb);
+ lastblock = sbi->s_last_block;
if (lastblock) {
int varlastblock = udf_variable_to_fixed(lastblock);
@@ -658,57 +765,83 @@
* however, if the disc isn't closed, it could be 512 */
for (i = 0; !lastblock && i < ARRAY_SIZE(last); i++) {
- if (last[i] < 0 || !(bh = sb_bread(sb, last[i]))) {
- ident = location = 0;
- } else {
- ident = le16_to_cpu(((tag *)bh->b_data)->tagIdent);
- location = le32_to_cpu(((tag *)bh->b_data)->tagLocation);
- brelse(bh);
+ ident = location = 0;
+ if (last[i] >= 0) {
+ bh = sb_bread(sb, last[i]);
+ if (bh) {
+ tag *t = (tag *)bh->b_data;
+ ident = le16_to_cpu(t->tagIdent);
+ location = le32_to_cpu(t->tagLocation);
+ brelse(bh);
+ }
}
if (ident == TAG_IDENT_AVDP) {
- if (location == last[i] - UDF_SB_SESSION(sb)) {
- lastblock = UDF_SB_ANCHOR(sb)[0] = last[i] - UDF_SB_SESSION(sb);
- UDF_SB_ANCHOR(sb)[1] = last[i] - 256 - UDF_SB_SESSION(sb);
- } else if (location == udf_variable_to_fixed(last[i]) - UDF_SB_SESSION(sb)) {
+ if (location == last[i] - sbi->s_session) {
+ lastblock = last[i] - sbi->s_session;
+ sbi->s_anchor[0] = lastblock;
+ sbi->s_anchor[1] = lastblock - 256;
+ } else if (location ==
+ udf_variable_to_fixed(last[i]) -
+ sbi->s_session) {
UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
- lastblock = UDF_SB_ANCHOR(sb)[0] = udf_variable_to_fixed(last[i]) - UDF_SB_SESSION(sb);
- UDF_SB_ANCHOR(sb)[1] = lastblock - 256 - UDF_SB_SESSION(sb);
+ lastblock =
+ udf_variable_to_fixed(last[i]) -
+ sbi->s_session;
+ sbi->s_anchor[0] = lastblock;
+ sbi->s_anchor[1] = lastblock - 256 -
+ sbi->s_session;
} else {
- udf_debug("Anchor found at block %d, location mismatch %d.\n",
+ udf_debug("Anchor found at block %d, "
+ "location mismatch %d.\n",
last[i], location);
}
- } else if (ident == TAG_IDENT_FE || ident == TAG_IDENT_EFE) {
+ } else if (ident == TAG_IDENT_FE ||
+ ident == TAG_IDENT_EFE) {
lastblock = last[i];
- UDF_SB_ANCHOR(sb)[3] = 512;
+ sbi->s_anchor[3] = 512;
} else {
- if (last[i] < 256 || !(bh = sb_bread(sb, last[i] - 256))) {
- ident = location = 0;
- } else {
- ident = le16_to_cpu(((tag *)bh->b_data)->tagIdent);
- location = le32_to_cpu(((tag *)bh->b_data)->tagLocation);
- brelse(bh);
+ ident = location = 0;
+ if (last[i] >= 256) {
+ bh = sb_bread(sb, last[i] - 256);
+ if (bh) {
+ tag *t = (tag *)bh->b_data;
+ ident = le16_to_cpu(
+ t->tagIdent);
+ location = le32_to_cpu(
+ t->tagLocation);
+ brelse(bh);
+ }
}
if (ident == TAG_IDENT_AVDP &&
- location == last[i] - 256 - UDF_SB_SESSION(sb)) {
+ location == last[i] - 256 -
+ sbi->s_session) {
lastblock = last[i];
- UDF_SB_ANCHOR(sb)[1] = last[i] - 256;
+ sbi->s_anchor[1] = last[i] - 256;
} else {
- if (last[i] < 312 + UDF_SB_SESSION(sb) ||
- !(bh = sb_bread(sb, last[i] - 312 - UDF_SB_SESSION(sb)))) {
- ident = location = 0;
- } else {
- ident = le16_to_cpu(((tag *)bh->b_data)->tagIdent);
- location = le32_to_cpu(((tag *)bh->b_data)->tagLocation);
- brelse(bh);
+ ident = location = 0;
+ if (last[i] >= 312 + sbi->s_session) {
+ bh = sb_bread(sb,
+ last[i] - 312 -
+ sbi->s_session);
+ if (bh) {
+ tag *t = (tag *)
+ bh->b_data;
+ ident = le16_to_cpu(
+ t->tagIdent);
+ location = le32_to_cpu(
+ t->tagLocation);
+ brelse(bh);
+ }
}
if (ident == TAG_IDENT_AVDP &&
location == udf_variable_to_fixed(last[i]) - 256) {
- UDF_SET_FLAG(sb, UDF_FLAG_VARCONV);
+ UDF_SET_FLAG(sb,
+ UDF_FLAG_VARCONV);
lastblock = udf_variable_to_fixed(last[i]);
- UDF_SB_ANCHOR(sb)[1] = lastblock - 256;
+ sbi->s_anchor[1] = lastblock - 256;
}
}
}
@@ -716,10 +849,12 @@
}
if (!lastblock) {
- /* We havn't found the lastblock. check 312 */
- if ((bh = sb_bread(sb, 312 + UDF_SB_SESSION(sb)))) {
- ident = le16_to_cpu(((tag *)bh->b_data)->tagIdent);
- location = le32_to_cpu(((tag *)bh->b_data)->tagLocation);
+ /* We haven't found the lastblock. check 312 */
+ bh = sb_bread(sb, 312 + sbi->s_session);
+ if (bh) {
+ tag *t = (tag *)bh->b_data;
+ ident = le16_to_cpu(t->tagIdent);
+ location = le32_to_cpu(t->tagLocation);
brelse(bh);
if (ident == TAG_IDENT_AVDP && location == 256)
@@ -727,29 +862,33 @@
}
}
- for (i = 0; i < ARRAY_SIZE(UDF_SB_ANCHOR(sb)); i++) {
- if (UDF_SB_ANCHOR(sb)[i]) {
- if (!(bh = udf_read_tagged(sb, UDF_SB_ANCHOR(sb)[i],
- UDF_SB_ANCHOR(sb)[i], &ident))) {
- UDF_SB_ANCHOR(sb)[i] = 0;
- } else {
+ for (i = 0; i < ARRAY_SIZE(sbi->s_anchor); i++) {
+ if (sbi->s_anchor[i]) {
+ bh = udf_read_tagged(sb, sbi->s_anchor[i],
+ sbi->s_anchor[i], &ident);
+ if (!bh)
+ sbi->s_anchor[i] = 0;
+ else {
brelse(bh);
if ((ident != TAG_IDENT_AVDP) &&
- (i || (ident != TAG_IDENT_FE && ident != TAG_IDENT_EFE))) {
- UDF_SB_ANCHOR(sb)[i] = 0;
- }
+ (i || (ident != TAG_IDENT_FE &&
+ ident != TAG_IDENT_EFE)))
+ sbi->s_anchor[i] = 0;
}
}
}
- UDF_SB_LASTBLOCK(sb) = lastblock;
+ sbi->s_last_block = lastblock;
}
-static int udf_find_fileset(struct super_block *sb, kernel_lb_addr *fileset, kernel_lb_addr *root)
+static int udf_find_fileset(struct super_block *sb,
+ kernel_lb_addr *fileset,
+ kernel_lb_addr *root)
{
struct buffer_head *bh = NULL;
long lastblock;
uint16_t ident;
+ struct udf_sb_info *sbi;
if (fileset->logicalBlockNum != 0xFFFFFFFF ||
fileset->partitionReferenceNum != 0xFFFF) {
@@ -764,22 +903,27 @@
}
- if (!bh) { /* Search backwards through the partitions */
+ sbi = UDF_SB(sb);
+ if (!bh) {
+ /* Search backwards through the partitions */
kernel_lb_addr newfileset;
/* --> cvg: FIXME - is it reasonable? */
return 1;
- for (newfileset.partitionReferenceNum = UDF_SB_NUMPARTS(sb) - 1;
+ for (newfileset.partitionReferenceNum = sbi->s_partitions - 1;
(newfileset.partitionReferenceNum != 0xFFFF &&
fileset->logicalBlockNum == 0xFFFFFFFF &&
fileset->partitionReferenceNum == 0xFFFF);
newfileset.partitionReferenceNum--) {
- lastblock = UDF_SB_PARTLEN(sb, newfileset.partitionReferenceNum);
+ lastblock = sbi->s_partmaps
+ [newfileset.partitionReferenceNum]
+ .s_partition_len;
newfileset.logicalBlockNum = 0;
do {
- bh = udf_read_ptagged(sb, newfileset, 0, &ident);
+ bh = udf_read_ptagged(sb, newfileset, 0,
+ &ident);
if (!bh) {
newfileset.logicalBlockNum++;
continue;
@@ -789,11 +933,12 @@
case TAG_IDENT_SBD:
{
struct spaceBitmapDesc *sp;
- sp = (struct spaceBitmapDesc *)bh->b_data;
+ sp = (struct spaceBitmapDesc *)
+ bh->b_data;
newfileset.logicalBlockNum += 1 +
((le32_to_cpu(sp->numOfBytes) +
- sizeof(struct spaceBitmapDesc) - 1)
- >> sb->s_blocksize_bits);
+ sizeof(struct spaceBitmapDesc)
+ - 1) >> sb->s_blocksize_bits);
brelse(bh);
break;
}
@@ -818,7 +963,7 @@
fileset->logicalBlockNum,
fileset->partitionReferenceNum);
- UDF_SB_PARTITION(sb) = fileset->partitionReferenceNum;
+ sbi->s_partition = fileset->partitionReferenceNum;
udf_load_fileset(sb, bh, root);
brelse(bh);
return 0;
@@ -840,26 +985,26 @@
lets_to_cpu(pvoldesc->recordingDateAndTime))) {
kernel_timestamp ts;
ts = lets_to_cpu(pvoldesc->recordingDateAndTime);
- udf_debug("recording time %ld/%ld, %04u/%02u/%02u %02u:%02u (%x)\n",
+ udf_debug("recording time %ld/%ld, %04u/%02u/%02u"
+ " %02u:%02u (%x)\n",
recording, recording_usec,
ts.year, ts.month, ts.day, ts.hour,
ts.minute, ts.typeAndTimezone);
- UDF_SB_RECORDTIME(sb).tv_sec = recording;
- UDF_SB_RECORDTIME(sb).tv_nsec = recording_usec * 1000;
+ UDF_SB(sb)->s_record_time.tv_sec = recording;
+ UDF_SB(sb)->s_record_time.tv_nsec = recording_usec * 1000;
}
- if (!udf_build_ustr(&instr, pvoldesc->volIdent, 32)) {
+ if (!udf_build_ustr(&instr, pvoldesc->volIdent, 32))
if (udf_CS0toUTF8(&outstr, &instr)) {
- strncpy(UDF_SB_VOLIDENT(sb), outstr.u_name,
+ strncpy(UDF_SB(sb)->s_volume_ident, outstr.u_name,
outstr.u_len > 31 ? 31 : outstr.u_len);
- udf_debug("volIdent[] = '%s'\n", UDF_SB_VOLIDENT(sb));
+ udf_debug("volIdent[] = '%s'\n",
+ UDF_SB(sb)->s_volume_ident);
}
- }
- if (!udf_build_ustr(&instr, pvoldesc->volSetIdent, 128)) {
+ if (!udf_build_ustr(&instr, pvoldesc->volSetIdent, 128))
if (udf_CS0toUTF8(&outstr, &instr))
udf_debug("volSetIdent[] = '%s'\n", outstr.u_name);
- }
}
static void udf_load_fileset(struct super_block *sb, struct buffer_head *bh,
@@ -871,65 +1016,124 @@
*root = lelb_to_cpu(fset->rootDirectoryICB.extLocation);
- UDF_SB_SERIALNUM(sb) = le16_to_cpu(fset->descTag.tagSerialNum);
+ UDF_SB(sb)->s_serial_number = le16_to_cpu(fset->descTag.tagSerialNum);
udf_debug("Rootdir at block=%d, partition=%d\n",
root->logicalBlockNum, root->partitionReferenceNum);
}
+int udf_compute_nr_groups(struct super_block *sb, u32 partition)
+{
+ struct udf_part_map *map = &UDF_SB(sb)->s_partmaps[partition];
+ return (map->s_partition_len +
+ (sizeof(struct spaceBitmapDesc) << 3) +
+ (sb->s_blocksize * 8) - 1) /
+ (sb->s_blocksize * 8);
+}
+
+static struct udf_bitmap *udf_sb_alloc_bitmap(struct super_block *sb, u32 index)
+{
+ struct udf_bitmap *bitmap;
+ int nr_groups;
+ int size;
+
+ nr_groups = udf_compute_nr_groups(sb, index);
+ size = sizeof(struct udf_bitmap) +
+ (sizeof(struct buffer_head *) * nr_groups);
+
+ if (size <= PAGE_SIZE)
+ bitmap = kmalloc(size, GFP_KERNEL);
+ else
+ bitmap = vmalloc(size); /* TODO: get rid of vmalloc */
+
+ if (bitmap == NULL) {
+ udf_error(sb, __FUNCTION__,
+ "Unable to allocate space for bitmap "
+ "and %d buffer_head pointers", nr_groups);
+ return NULL;
+ }
+
+ memset(bitmap, 0x00, size);
+ bitmap->s_block_bitmap = (struct buffer_head **)(bitmap + 1);
+ bitmap->s_nr_groups = nr_groups;
+ return bitmap;
+}
+
static int udf_load_partdesc(struct super_block *sb, struct buffer_head *bh)
{
struct partitionDesc *p;
int i;
+ struct udf_part_map *map;
+ struct udf_sb_info *sbi;
p = (struct partitionDesc *)bh->b_data;
+ sbi = UDF_SB(sb);
- for (i = 0; i < UDF_SB_NUMPARTS(sb); i++) {
+ for (i = 0; i < sbi->s_partitions; i++) {
+ map = &sbi->s_partmaps[i];
udf_debug("Searching map: (%d == %d)\n",
- UDF_SB_PARTMAPS(sb)[i].s_partition_num, le16_to_cpu(p->partitionNumber));
- if (UDF_SB_PARTMAPS(sb)[i].s_partition_num == le16_to_cpu(p->partitionNumber)) {
- UDF_SB_PARTLEN(sb,i) = le32_to_cpu(p->partitionLength); /* blocks */
- UDF_SB_PARTROOT(sb,i) = le32_to_cpu(p->partitionStartingLocation);
- if (le32_to_cpu(p->accessType) == PD_ACCESS_TYPE_READ_ONLY)
- UDF_SB_PARTFLAGS(sb,i) |= UDF_PART_FLAG_READ_ONLY;
- if (le32_to_cpu(p->accessType) == PD_ACCESS_TYPE_WRITE_ONCE)
- UDF_SB_PARTFLAGS(sb,i) |= UDF_PART_FLAG_WRITE_ONCE;
- if (le32_to_cpu(p->accessType) == PD_ACCESS_TYPE_REWRITABLE)
- UDF_SB_PARTFLAGS(sb,i) |= UDF_PART_FLAG_REWRITABLE;
- if (le32_to_cpu(p->accessType) == PD_ACCESS_TYPE_OVERWRITABLE)
- UDF_SB_PARTFLAGS(sb,i) |= UDF_PART_FLAG_OVERWRITABLE;
+ map->s_partition_num,
+ le16_to_cpu(p->partitionNumber));
+ if (map->s_partition_num ==
+ le16_to_cpu(p->partitionNumber)) {
+ map->s_partition_len =
+ le32_to_cpu(p->partitionLength); /* blocks */
+ map->s_partition_root =
+ le32_to_cpu(p->partitionStartingLocation);
+ if (p->accessType ==
+ cpu_to_le32(PD_ACCESS_TYPE_READ_ONLY))
+ map->s_partition_flags |=
+ UDF_PART_FLAG_READ_ONLY;
+ if (p->accessType ==
+ cpu_to_le32(PD_ACCESS_TYPE_WRITE_ONCE))
+ map->s_partition_flags |=
+ UDF_PART_FLAG_WRITE_ONCE;
+ if (p->accessType ==
+ cpu_to_le32(PD_ACCESS_TYPE_REWRITABLE))
+ map->s_partition_flags |=
+ UDF_PART_FLAG_REWRITABLE;
+ if (p->accessType ==
+ cpu_to_le32(PD_ACCESS_TYPE_OVERWRITABLE))
+ map->s_partition_flags |=
+ UDF_PART_FLAG_OVERWRITABLE;
- if (!strcmp(p->partitionContents.ident, PD_PARTITION_CONTENTS_NSR02) ||
- !strcmp(p->partitionContents.ident, PD_PARTITION_CONTENTS_NSR03)) {
+ if (!strcmp(p->partitionContents.ident,
+ PD_PARTITION_CONTENTS_NSR02) ||
+ !strcmp(p->partitionContents.ident,
+ PD_PARTITION_CONTENTS_NSR03)) {
struct partitionHeaderDesc *phd;
- phd = (struct partitionHeaderDesc *)(p->partitionContentsUse);
+ phd = (struct partitionHeaderDesc *)
+ (p->partitionContentsUse);
if (phd->unallocSpaceTable.extLength) {
kernel_lb_addr loc = {
.logicalBlockNum = le32_to_cpu(phd->unallocSpaceTable.extPosition),
.partitionReferenceNum = i,
};
- UDF_SB_PARTMAPS(sb)[i].s_uspace.s_table =
+ map->s_uspace.s_table =
udf_iget(sb, loc);
- if (!UDF_SB_PARTMAPS(sb)[i].s_uspace.s_table) {
+ if (!map->s_uspace.s_table) {
udf_debug("cannot load unallocSpaceTable (part %d)\n", i);
return 1;
}
- UDF_SB_PARTFLAGS(sb,i) |= UDF_PART_FLAG_UNALLOC_TABLE;
+ map->s_partition_flags |=
+ UDF_PART_FLAG_UNALLOC_TABLE;
udf_debug("unallocSpaceTable (part %d) @ %ld\n",
- i, UDF_SB_PARTMAPS(sb)[i].s_uspace.s_table->i_ino);
+ i, map->s_uspace.s_table->i_ino);
}
if (phd->unallocSpaceBitmap.extLength) {
- UDF_SB_ALLOC_BITMAP(sb, i, s_uspace);
- if (UDF_SB_PARTMAPS(sb)[i].s_uspace.s_bitmap != NULL) {
- UDF_SB_PARTMAPS(sb)[i].s_uspace.s_bitmap->s_extLength =
+ struct udf_bitmap *bitmap =
+ udf_sb_alloc_bitmap(sb, i);
+ map->s_uspace.s_bitmap = bitmap;
+ if (bitmap != NULL) {
+ bitmap->s_extLength =
le32_to_cpu(phd->unallocSpaceBitmap.extLength);
- UDF_SB_PARTMAPS(sb)[i].s_uspace.s_bitmap->s_extPosition =
+ bitmap->s_extPosition =
le32_to_cpu(phd->unallocSpaceBitmap.extPosition);
- UDF_SB_PARTFLAGS(sb,i) |= UDF_PART_FLAG_UNALLOC_BITMAP;
+ map->s_partition_flags |= UDF_PART_FLAG_UNALLOC_BITMAP;
udf_debug("unallocSpaceBitmap (part %d) @ %d\n",
- i, UDF_SB_PARTMAPS(sb)[i].s_uspace.s_bitmap->s_extPosition);
+ i, bitmap->s_extPosition);
}
}
if (phd->partitionIntegrityTable.extLength)
@@ -940,40 +1144,45 @@
.partitionReferenceNum = i,
};
- UDF_SB_PARTMAPS(sb)[i].s_fspace.s_table =
+ map->s_fspace.s_table =
udf_iget(sb, loc);
- if (!UDF_SB_PARTMAPS(sb)[i].s_fspace.s_table) {
+ if (!map->s_fspace.s_table) {
udf_debug("cannot load freedSpaceTable (part %d)\n", i);
return 1;
}
- UDF_SB_PARTFLAGS(sb,i) |= UDF_PART_FLAG_FREED_TABLE;
+ map->s_partition_flags |=
+ UDF_PART_FLAG_FREED_TABLE;
udf_debug("freedSpaceTable (part %d) @ %ld\n",
- i, UDF_SB_PARTMAPS(sb)[i].s_fspace.s_table->i_ino);
+ i, map->s_fspace.s_table->i_ino);
}
if (phd->freedSpaceBitmap.extLength) {
- UDF_SB_ALLOC_BITMAP(sb, i, s_fspace);
- if (UDF_SB_PARTMAPS(sb)[i].s_fspace.s_bitmap != NULL) {
- UDF_SB_PARTMAPS(sb)[i].s_fspace.s_bitmap->s_extLength =
+ struct udf_bitmap *bitmap =
+ udf_sb_alloc_bitmap(sb, i);
+ map->s_fspace.s_bitmap = bitmap;
+ if (bitmap != NULL) {
+ bitmap->s_extLength =
le32_to_cpu(phd->freedSpaceBitmap.extLength);
- UDF_SB_PARTMAPS(sb)[i].s_fspace.s_bitmap->s_extPosition =
+ bitmap->s_extPosition =
le32_to_cpu(phd->freedSpaceBitmap.extPosition);
- UDF_SB_PARTFLAGS(sb,i) |= UDF_PART_FLAG_FREED_BITMAP;
+ map->s_partition_flags |= UDF_PART_FLAG_FREED_BITMAP;
udf_debug("freedSpaceBitmap (part %d) @ %d\n",
- i, UDF_SB_PARTMAPS(sb)[i].s_fspace.s_bitmap->s_extPosition);
+ i, bitmap->s_extPosition);
}
}
}
break;
}
}
- if (i == UDF_SB_NUMPARTS(sb)) {
+ if (i == sbi->s_partitions)
udf_debug("Partition (%d) not found in partition map\n",
le16_to_cpu(p->partitionNumber));
- } else {
- udf_debug("Partition (%d:%d type %x) starts at physical %d, block length %d\n",
- le16_to_cpu(p->partitionNumber), i, UDF_SB_PARTTYPE(sb,i),
- UDF_SB_PARTROOT(sb,i), UDF_SB_PARTLEN(sb,i));
- }
+ else
+ udf_debug("Partition (%d:%d type %x) starts at physical %d, "
+ "block length %d\n",
+ le16_to_cpu(p->partitionNumber), i,
+ map->s_partition_type,
+ map->s_partition_root,
+ map->s_partition_len);
return 0;
}
@@ -983,70 +1192,105 @@
struct logicalVolDesc *lvd;
int i, j, offset;
uint8_t type;
+ struct udf_sb_info *sbi = UDF_SB(sb);
+ struct genericPartitionMap *gpm;
lvd = (struct logicalVolDesc *)bh->b_data;
- UDF_SB_ALLOC_PARTMAPS(sb, le32_to_cpu(lvd->numPartitionMaps));
+ i = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
+ if (i != 0)
+ return i;
for (i = 0, offset = 0;
- i < UDF_SB_NUMPARTS(sb) && offset < le32_to_cpu(lvd->mapTableLength);
- i++, offset += ((struct genericPartitionMap *)&(lvd->partitionMaps[offset]))->partitionMapLength) {
- type = ((struct genericPartitionMap *)&(lvd->partitionMaps[offset]))->partitionMapType;
+ i < sbi->s_partitions && offset < le32_to_cpu(lvd->mapTableLength);
+ i++, offset += gpm->partitionMapLength) {
+ struct udf_part_map *map = &sbi->s_partmaps[i];
+ gpm = (struct genericPartitionMap *)
+ &(lvd->partitionMaps[offset]);
+ type = gpm->partitionMapType;
if (type == 1) {
- struct genericPartitionMap1 *gpm1 = (struct genericPartitionMap1 *)&(lvd->partitionMaps[offset]);
- UDF_SB_PARTTYPE(sb,i) = UDF_TYPE1_MAP15;
- UDF_SB_PARTVSN(sb,i) = le16_to_cpu(gpm1->volSeqNum);
- UDF_SB_PARTNUM(sb,i) = le16_to_cpu(gpm1->partitionNum);
- UDF_SB_PARTFUNC(sb,i) = NULL;
+ struct genericPartitionMap1 *gpm1 =
+ (struct genericPartitionMap1 *)gpm;
+ map->s_partition_type = UDF_TYPE1_MAP15;
+ map->s_volumeseqnum = le16_to_cpu(gpm1->volSeqNum);
+ map->s_partition_num = le16_to_cpu(gpm1->partitionNum);
+ map->s_partition_func = NULL;
} else if (type == 2) {
- struct udfPartitionMap2 *upm2 = (struct udfPartitionMap2 *)&(lvd->partitionMaps[offset]);
- if (!strncmp(upm2->partIdent.ident, UDF_ID_VIRTUAL, strlen(UDF_ID_VIRTUAL))) {
- if (le16_to_cpu(((__le16 *)upm2->partIdent.identSuffix)[0]) == 0x0150) {
- UDF_SB_PARTTYPE(sb,i) = UDF_VIRTUAL_MAP15;
- UDF_SB_PARTFUNC(sb,i) = udf_get_pblock_virt15;
- } else if (le16_to_cpu(((__le16 *)upm2->partIdent.identSuffix)[0]) == 0x0200) {
- UDF_SB_PARTTYPE(sb,i) = UDF_VIRTUAL_MAP20;
- UDF_SB_PARTFUNC(sb,i) = udf_get_pblock_virt20;
+ struct udfPartitionMap2 *upm2 =
+ (struct udfPartitionMap2 *)gpm;
+ if (!strncmp(upm2->partIdent.ident, UDF_ID_VIRTUAL,
+ strlen(UDF_ID_VIRTUAL))) {
+ u16 suf =
+ le16_to_cpu(((__le16 *)upm2->partIdent.
+ identSuffix)[0]);
+ if (suf == 0x0150) {
+ map->s_partition_type =
+ UDF_VIRTUAL_MAP15;
+ map->s_partition_func =
+ udf_get_pblock_virt15;
+ } else if (suf == 0x0200) {
+ map->s_partition_type =
+ UDF_VIRTUAL_MAP20;
+ map->s_partition_func =
+ udf_get_pblock_virt20;
}
- } else if (!strncmp(upm2->partIdent.ident, UDF_ID_SPARABLE, strlen(UDF_ID_SPARABLE))) {
+ } else if (!strncmp(upm2->partIdent.ident,
+ UDF_ID_SPARABLE,
+ strlen(UDF_ID_SPARABLE))) {
uint32_t loc;
uint16_t ident;
struct sparingTable *st;
- struct sparablePartitionMap *spm = (struct sparablePartitionMap *)&(lvd->partitionMaps[offset]);
+ struct sparablePartitionMap *spm =
+ (struct sparablePartitionMap *)gpm;
- UDF_SB_PARTTYPE(sb,i) = UDF_SPARABLE_MAP15;
- UDF_SB_TYPESPAR(sb,i).s_packet_len = le16_to_cpu(spm->packetLength);
+ map->s_partition_type = UDF_SPARABLE_MAP15;
+ map->s_type_specific.s_sparing.s_packet_len =
+ le16_to_cpu(spm->packetLength);
for (j = 0; j < spm->numSparingTables; j++) {
- loc = le32_to_cpu(spm->locSparingTable[j]);
- UDF_SB_TYPESPAR(sb,i).s_spar_map[j] =
- udf_read_tagged(sb, loc, loc, &ident);
- if (UDF_SB_TYPESPAR(sb,i).s_spar_map[j] != NULL) {
- st = (struct sparingTable *)UDF_SB_TYPESPAR(sb,i).s_spar_map[j]->b_data;
- if (ident != 0 ||
- strncmp(st->sparingIdent.ident, UDF_ID_SPARING, strlen(UDF_ID_SPARING))) {
- brelse(UDF_SB_TYPESPAR(sb,i).s_spar_map[j]);
- UDF_SB_TYPESPAR(sb,i).s_spar_map[j] = NULL;
+ struct buffer_head *bh2;
+
+ loc = le32_to_cpu(
+ spm->locSparingTable[j]);
+ bh2 = udf_read_tagged(sb, loc, loc,
+ &ident);
+ map->s_type_specific.s_sparing.
+ s_spar_map[j] = bh2;
+
+ if (bh2 != NULL) {
+ st = (struct sparingTable *)
+ bh2->b_data;
+ if (ident != 0 || strncmp(
+ st->sparingIdent.ident,
+ UDF_ID_SPARING,
+ strlen(UDF_ID_SPARING))) {
+ brelse(bh2);
+ map->s_type_specific.
+ s_sparing.
+ s_spar_map[j] =
+ NULL;
}
}
}
- UDF_SB_PARTFUNC(sb,i) = udf_get_pblock_spar15;
+ map->s_partition_func = udf_get_pblock_spar15;
} else {
- udf_debug("Unknown ident: %s\n", upm2->partIdent.ident);
+ udf_debug("Unknown ident: %s\n",
+ upm2->partIdent.ident);
continue;
}
- UDF_SB_PARTVSN(sb,i) = le16_to_cpu(upm2->volSeqNum);
- UDF_SB_PARTNUM(sb,i) = le16_to_cpu(upm2->partitionNum);
+ map->s_volumeseqnum = le16_to_cpu(upm2->volSeqNum);
+ map->s_partition_num = le16_to_cpu(upm2->partitionNum);
}
udf_debug("Partition (%d:%d) type %d on volume %d\n",
- i, UDF_SB_PARTNUM(sb,i), type, UDF_SB_PARTVSN(sb,i));
+ i, map->s_partition_num, type,
+ map->s_volumeseqnum);
}
if (fileset) {
long_ad *la = (long_ad *)&(lvd->logicalVolContentsUse[0]);
*fileset = lelb_to_cpu(la->extLocation);
- udf_debug("FileSet found in LogicalVolDesc at block=%d, partition=%d\n",
- fileset->logicalBlockNum,
+ udf_debug("FileSet found in LogicalVolDesc at block=%d, "
+ "partition=%d\n", fileset->logicalBlockNum,
fileset->partitionReferenceNum);
}
if (lvd->integritySeqExt.extLength)
@@ -1063,22 +1307,26 @@
{
struct buffer_head *bh = NULL;
uint16_t ident;
+ struct udf_sb_info *sbi = UDF_SB(sb);
+ struct logicalVolIntegrityDesc *lvid;
while (loc.extLength > 0 &&
(bh = udf_read_tagged(sb, loc.extLocation,
loc.extLocation, &ident)) &&
ident == TAG_IDENT_LVID) {
- UDF_SB_LVIDBH(sb) = bh;
+ sbi->s_lvid_bh = bh;
+ lvid = (struct logicalVolIntegrityDesc *)bh->b_data;
- if (UDF_SB_LVID(sb)->nextIntegrityExt.extLength)
- udf_load_logicalvolint(sb, leea_to_cpu(UDF_SB_LVID(sb)->nextIntegrityExt));
+ if (lvid->nextIntegrityExt.extLength)
+ udf_load_logicalvolint(sb,
+ leea_to_cpu(lvid->nextIntegrityExt));
- if (UDF_SB_LVIDBH(sb) != bh)
+ if (sbi->s_lvid_bh != bh)
brelse(bh);
loc.extLength -= sb->s_blocksize;
loc.extLocation++;
}
- if (UDF_SB_LVIDBH(sb) != bh)
+ if (sbi->s_lvid_bh != bh)
brelse(bh);
}
@@ -1097,11 +1345,12 @@
* July 1, 1997 - Andrew E. Mileski
* Written, tested, and released.
*/
-static int udf_process_sequence(struct super_block *sb, long block, long lastblock,
- kernel_lb_addr *fileset)
+static int udf_process_sequence(struct super_block *sb, long block,
+ long lastblock, kernel_lb_addr *fileset)
{
struct buffer_head *bh = NULL;
struct udf_vds_record vds[VDS_POS_LENGTH];
+ struct udf_vds_record *curr;
struct generic_desc *gd;
struct volDescPtr *vdp;
int done = 0;
@@ -1124,43 +1373,51 @@
vdsn = le32_to_cpu(gd->volDescSeqNum);
switch (ident) {
case TAG_IDENT_PVD: /* ISO 13346 3/10.1 */
- if (vdsn >= vds[VDS_POS_PRIMARY_VOL_DESC].volDescSeqNum) {
- vds[VDS_POS_PRIMARY_VOL_DESC].volDescSeqNum = vdsn;
- vds[VDS_POS_PRIMARY_VOL_DESC].block = block;
+ curr = &vds[VDS_POS_PRIMARY_VOL_DESC];
+ if (vdsn >= curr->volDescSeqNum) {
+ curr->volDescSeqNum = vdsn;
+ curr->block = block;
}
break;
case TAG_IDENT_VDP: /* ISO 13346 3/10.3 */
- if (vdsn >= vds[VDS_POS_VOL_DESC_PTR].volDescSeqNum) {
- vds[VDS_POS_VOL_DESC_PTR].volDescSeqNum = vdsn;
- vds[VDS_POS_VOL_DESC_PTR].block = block;
+ curr = &vds[VDS_POS_VOL_DESC_PTR];
+ if (vdsn >= curr->volDescSeqNum) {
+ curr->volDescSeqNum = vdsn;
+ curr->block = block;
vdp = (struct volDescPtr *)bh->b_data;
- next_s = le32_to_cpu(vdp->nextVolDescSeqExt.extLocation);
- next_e = le32_to_cpu(vdp->nextVolDescSeqExt.extLength);
+ next_s = le32_to_cpu(
+ vdp->nextVolDescSeqExt.extLocation);
+ next_e = le32_to_cpu(
+ vdp->nextVolDescSeqExt.extLength);
next_e = next_e >> sb->s_blocksize_bits;
next_e += next_s;
}
break;
case TAG_IDENT_IUVD: /* ISO 13346 3/10.4 */
- if (vdsn >= vds[VDS_POS_IMP_USE_VOL_DESC].volDescSeqNum) {
- vds[VDS_POS_IMP_USE_VOL_DESC].volDescSeqNum = vdsn;
- vds[VDS_POS_IMP_USE_VOL_DESC].block = block;
+ curr = &vds[VDS_POS_IMP_USE_VOL_DESC];
+ if (vdsn >= curr->volDescSeqNum) {
+ curr->volDescSeqNum = vdsn;
+ curr->block = block;
}
break;
case TAG_IDENT_PD: /* ISO 13346 3/10.5 */
- if (!vds[VDS_POS_PARTITION_DESC].block)
- vds[VDS_POS_PARTITION_DESC].block = block;
+ curr = &vds[VDS_POS_PARTITION_DESC];
+ if (!curr->block)
+ curr->block = block;
break;
case TAG_IDENT_LVD: /* ISO 13346 3/10.6 */
- if (vdsn >= vds[VDS_POS_LOGICAL_VOL_DESC].volDescSeqNum) {
- vds[VDS_POS_LOGICAL_VOL_DESC].volDescSeqNum = vdsn;
- vds[VDS_POS_LOGICAL_VOL_DESC].block = block;
+ curr = &vds[VDS_POS_LOGICAL_VOL_DESC];
+ if (vdsn >= curr->volDescSeqNum) {
+ curr->volDescSeqNum = vdsn;
+ curr->block = block;
}
break;
case TAG_IDENT_USD: /* ISO 13346 3/10.8 */
- if (vdsn >= vds[VDS_POS_UNALLOC_SPACE_DESC].volDescSeqNum) {
- vds[VDS_POS_UNALLOC_SPACE_DESC].volDescSeqNum = vdsn;
- vds[VDS_POS_UNALLOC_SPACE_DESC].block = block;
+ curr = &vds[VDS_POS_UNALLOC_SPACE_DESC];
+ if (vdsn >= curr->volDescSeqNum) {
+ curr->volDescSeqNum = vdsn;
+ curr->block = block;
}
break;
case TAG_IDENT_TD: /* ISO 13346 3/10.9 */
@@ -1169,32 +1426,38 @@
block = next_s;
lastblock = next_e;
next_s = next_e = 0;
- } else {
+ } else
done = 1;
- }
break;
}
brelse(bh);
}
for (i = 0; i < VDS_POS_LENGTH; i++) {
if (vds[i].block) {
- bh = udf_read_tagged(sb, vds[i].block, vds[i].block, &ident);
+ bh = udf_read_tagged(sb, vds[i].block, vds[i].block,
+ &ident);
if (i == VDS_POS_PRIMARY_VOL_DESC) {
udf_load_pvoldesc(sb, bh);
} else if (i == VDS_POS_LOGICAL_VOL_DESC) {
- udf_load_logicalvol(sb, bh, fileset);
+ if (udf_load_logicalvol(sb, bh, fileset)) {
+ brelse(bh);
+ return 1;
+ }
} else if (i == VDS_POS_PARTITION_DESC) {
struct buffer_head *bh2 = NULL;
if (udf_load_partdesc(sb, bh)) {
brelse(bh);
return 1;
}
- for (j = vds[i].block + 1; j < vds[VDS_POS_TERMINATING_DESC].block; j++) {
+ for (j = vds[i].block + 1;
+ j < vds[VDS_POS_TERMINATING_DESC].block;
+ j++) {
bh2 = udf_read_tagged(sb, j, j, &ident);
gd = (struct generic_desc *)bh2->b_data;
if (ident == TAG_IDENT_PD)
- if (udf_load_partdesc(sb, bh2)) {
+ if (udf_load_partdesc(sb,
+ bh2)) {
brelse(bh);
brelse(bh2);
return 1;
@@ -1222,14 +1485,17 @@
}
/* Check that it is NSR02 compliant */
/* Process any "CD-ROM Volume Descriptor Set" (ECMA 167 2/8.3.1) */
- else if ((block = udf_vrs(sb, silent)) == -1) {
- udf_debug("Failed to read byte 32768. Assuming open disc. "
- "Skipping validity check\n");
- if (!UDF_SB_LASTBLOCK(sb))
- UDF_SB_LASTBLOCK(sb) = udf_get_last_block(sb);
- return 0;
- } else {
- return !block;
+ else {
+ block = udf_vrs(sb, silent);
+ if (block == -1) {
+ struct udf_sb_info *sbi = UDF_SB(sb);
+ udf_debug("Failed to read byte 32768. Assuming open "
+ "disc. Skipping validity check\n");
+ if (!sbi->s_last_block)
+ sbi->s_last_block = udf_get_last_block(sb);
+ return 0;
+ } else
+ return !block;
}
}
@@ -1240,100 +1506,121 @@
struct buffer_head *bh;
long main_s, main_e, reserve_s, reserve_e;
int i, j;
+ struct udf_sb_info *sbi;
if (!sb)
return 1;
+ sbi = UDF_SB(sb);
- for (i = 0; i < ARRAY_SIZE(UDF_SB_ANCHOR(sb)); i++) {
- if (UDF_SB_ANCHOR(sb)[i] &&
- (bh = udf_read_tagged(sb, UDF_SB_ANCHOR(sb)[i],
- UDF_SB_ANCHOR(sb)[i], &ident))) {
- anchor = (struct anchorVolDescPtr *)bh->b_data;
+ for (i = 0; i < ARRAY_SIZE(sbi->s_anchor); i++) {
+ if (!sbi->s_anchor[i])
+ continue;
+ bh = udf_read_tagged(sb, sbi->s_anchor[i], sbi->s_anchor[i],
+ &ident);
+ if (!bh)
+ continue;
- /* Locate the main sequence */
- main_s = le32_to_cpu(anchor->mainVolDescSeqExt.extLocation);
- main_e = le32_to_cpu(anchor->mainVolDescSeqExt.extLength );
- main_e = main_e >> sb->s_blocksize_bits;
- main_e += main_s;
+ anchor = (struct anchorVolDescPtr *)bh->b_data;
- /* Locate the reserve sequence */
- reserve_s = le32_to_cpu(anchor->reserveVolDescSeqExt.extLocation);
- reserve_e = le32_to_cpu(anchor->reserveVolDescSeqExt.extLength);
- reserve_e = reserve_e >> sb->s_blocksize_bits;
- reserve_e += reserve_s;
+ /* Locate the main sequence */
+ main_s = le32_to_cpu(anchor->mainVolDescSeqExt.extLocation);
+ main_e = le32_to_cpu(anchor->mainVolDescSeqExt.extLength);
+ main_e = main_e >> sb->s_blocksize_bits;
+ main_e += main_s;
- brelse(bh);
+ /* Locate the reserve sequence */
+ reserve_s = le32_to_cpu(
+ anchor->reserveVolDescSeqExt.extLocation);
+ reserve_e = le32_to_cpu(
+ anchor->reserveVolDescSeqExt.extLength);
+ reserve_e = reserve_e >> sb->s_blocksize_bits;
+ reserve_e += reserve_s;
- /* Process the main & reserve sequences */
- /* responsible for finding the PartitionDesc(s) */
- if (!(udf_process_sequence(sb, main_s, main_e, fileset) &&
- udf_process_sequence(sb, reserve_s, reserve_e, fileset))) {
- break;
- }
- }
+ brelse(bh);
+
+ /* Process the main & reserve sequences */
+ /* responsible for finding the PartitionDesc(s) */
+ if (!(udf_process_sequence(sb, main_s, main_e,
+ fileset) &&
+ udf_process_sequence(sb, reserve_s, reserve_e,
+ fileset)))
+ break;
}
- if (i == ARRAY_SIZE(UDF_SB_ANCHOR(sb))) {
+ if (i == ARRAY_SIZE(sbi->s_anchor)) {
udf_debug("No Anchor block found\n");
return 1;
- } else
- udf_debug("Using anchor in block %d\n", UDF_SB_ANCHOR(sb)[i]);
+ }
+ udf_debug("Using anchor in block %d\n", sbi->s_anchor[i]);
- for (i = 0; i < UDF_SB_NUMPARTS(sb); i++) {
+ for (i = 0; i < sbi->s_partitions; i++) {
kernel_lb_addr uninitialized_var(ino);
- switch (UDF_SB_PARTTYPE(sb, i)) {
+ struct udf_part_map *map = &sbi->s_partmaps[i];
+ switch (map->s_partition_type) {
case UDF_VIRTUAL_MAP15:
case UDF_VIRTUAL_MAP20:
- if (!UDF_SB_LASTBLOCK(sb)) {
- UDF_SB_LASTBLOCK(sb) = udf_get_last_block(sb);
+ if (!sbi->s_last_block) {
+ sbi->s_last_block = udf_get_last_block(sb);
udf_find_anchor(sb);
}
- if (!UDF_SB_LASTBLOCK(sb)) {
+ if (!sbi->s_last_block) {
udf_debug("Unable to determine Lastblock (For "
"Virtual Partition)\n");
return 1;
}
- for (j = 0; j < UDF_SB_NUMPARTS(sb); j++) {
+ for (j = 0; j < sbi->s_partitions; j++) {
+ struct udf_part_map *map2 = &sbi->s_partmaps[j];
if (j != i &&
- UDF_SB_PARTVSN(sb, i) == UDF_SB_PARTVSN(sb, j) &&
- UDF_SB_PARTNUM(sb, i) == UDF_SB_PARTNUM(sb, j)) {
+ map->s_volumeseqnum ==
+ map2->s_volumeseqnum &&
+ map->s_partition_num ==
+ map2->s_partition_num) {
ino.partitionReferenceNum = j;
- ino.logicalBlockNum = UDF_SB_LASTBLOCK(sb) - UDF_SB_PARTROOT(sb, j);
+ ino.logicalBlockNum =
+ sbi->s_last_block -
+ map2->s_partition_root;
break;
}
}
- if (j == UDF_SB_NUMPARTS(sb))
+ if (j == sbi->s_partitions)
return 1;
- if (!(UDF_SB_VAT(sb) = udf_iget(sb, ino)))
+ sbi->s_vat_inode = udf_iget(sb, ino);
+ if (!sbi->s_vat_inode)
return 1;
- if (UDF_SB_PARTTYPE(sb, i) == UDF_VIRTUAL_MAP15) {
- UDF_SB_TYPEVIRT(sb, i).s_start_offset =
- udf_ext0_offset(UDF_SB_VAT(sb));
- UDF_SB_TYPEVIRT(sb, i).s_num_entries =
- (UDF_SB_VAT(sb)->i_size - 36) >> 2;
- } else if (UDF_SB_PARTTYPE(sb, i) == UDF_VIRTUAL_MAP20) {
- struct buffer_head *bh = NULL;
+ if (map->s_partition_type == UDF_VIRTUAL_MAP15) {
+ map->s_type_specific.s_virtual.s_start_offset =
+ udf_ext0_offset(sbi->s_vat_inode);
+ map->s_type_specific.s_virtual.s_num_entries =
+ (sbi->s_vat_inode->i_size - 36) >> 2;
+ } else if (map->s_partition_type == UDF_VIRTUAL_MAP20) {
uint32_t pos;
+ struct virtualAllocationTable20 *vat20;
- pos = udf_block_map(UDF_SB_VAT(sb), 0);
+ pos = udf_block_map(sbi->s_vat_inode, 0);
bh = sb_bread(sb, pos);
if (!bh)
return 1;
- UDF_SB_TYPEVIRT(sb, i).s_start_offset =
- le16_to_cpu(((struct virtualAllocationTable20 *)bh->b_data +
- udf_ext0_offset(UDF_SB_VAT(sb)))->lengthHeader) +
- udf_ext0_offset(UDF_SB_VAT(sb));
- UDF_SB_TYPEVIRT(sb, i).s_num_entries = (UDF_SB_VAT(sb)->i_size -
- UDF_SB_TYPEVIRT(sb, i).s_start_offset) >> 2;
+ vat20 = (struct virtualAllocationTable20 *)
+ bh->b_data +
+ udf_ext0_offset(sbi->s_vat_inode);
+ map->s_type_specific.s_virtual.s_start_offset =
+ le16_to_cpu(vat20->lengthHeader) +
+ udf_ext0_offset(sbi->s_vat_inode);
+ map->s_type_specific.s_virtual.s_num_entries =
+ (sbi->s_vat_inode->i_size -
+ map->s_type_specific.s_virtual.
+ s_start_offset) >> 2;
brelse(bh);
}
- UDF_SB_PARTROOT(sb, i) = udf_get_pblock(sb, 0, i, 0);
- UDF_SB_PARTLEN(sb, i) = UDF_SB_PARTLEN(sb, ino.partitionReferenceNum);
+ map->s_partition_root = udf_get_pblock(sb, 0, i, 0);
+ map->s_partition_len =
+ sbi->s_partmaps[ino.partitionReferenceNum].
+ s_partition_len;
}
}
return 0;
@@ -1341,62 +1628,86 @@
static void udf_open_lvid(struct super_block *sb)
{
- if (UDF_SB_LVIDBH(sb)) {
- int i;
+ struct udf_sb_info *sbi = UDF_SB(sb);
+ struct buffer_head *bh = sbi->s_lvid_bh;
+ if (bh) {
kernel_timestamp cpu_time;
+ struct logicalVolIntegrityDesc *lvid =
+ (struct logicalVolIntegrityDesc *)bh->b_data;
+ struct logicalVolIntegrityDescImpUse *lvidiu =
+ udf_sb_lvidiu(sbi);
- UDF_SB_LVIDIU(sb)->impIdent.identSuffix[0] = UDF_OS_CLASS_UNIX;
- UDF_SB_LVIDIU(sb)->impIdent.identSuffix[1] = UDF_OS_ID_LINUX;
+ lvidiu->impIdent.identSuffix[0] = UDF_OS_CLASS_UNIX;
+ lvidiu->impIdent.identSuffix[1] = UDF_OS_ID_LINUX;
if (udf_time_to_stamp(&cpu_time, CURRENT_TIME))
- UDF_SB_LVID(sb)->recordingDateAndTime = cpu_to_lets(cpu_time);
- UDF_SB_LVID(sb)->integrityType = LVID_INTEGRITY_TYPE_OPEN;
+ lvid->recordingDateAndTime = cpu_to_lets(cpu_time);
+ lvid->integrityType = LVID_INTEGRITY_TYPE_OPEN;
- UDF_SB_LVID(sb)->descTag.descCRC = cpu_to_le16(udf_crc((char *)UDF_SB_LVID(sb) + sizeof(tag),
- le16_to_cpu(UDF_SB_LVID(sb)->descTag.descCRCLength), 0));
+ lvid->descTag.descCRC = cpu_to_le16(
+ udf_crc((char *)lvid + sizeof(tag),
+ le16_to_cpu(lvid->descTag.descCRCLength),
+ 0));
- UDF_SB_LVID(sb)->descTag.tagChecksum = 0;
- for (i = 0; i < 16; i++)
- if (i != 4)
- UDF_SB_LVID(sb)->descTag.tagChecksum +=
- ((uint8_t *) &(UDF_SB_LVID(sb)->descTag))[i];
-
- mark_buffer_dirty(UDF_SB_LVIDBH(sb));
+ lvid->descTag.tagChecksum = udf_tag_checksum(&lvid->descTag);
+ mark_buffer_dirty(bh);
}
}
static void udf_close_lvid(struct super_block *sb)
{
kernel_timestamp cpu_time;
- int i;
+ struct udf_sb_info *sbi = UDF_SB(sb);
+ struct buffer_head *bh = sbi->s_lvid_bh;
+ struct logicalVolIntegrityDesc *lvid;
- if (UDF_SB_LVIDBH(sb) &&
- UDF_SB_LVID(sb)->integrityType == LVID_INTEGRITY_TYPE_OPEN) {
- UDF_SB_LVIDIU(sb)->impIdent.identSuffix[0] = UDF_OS_CLASS_UNIX;
- UDF_SB_LVIDIU(sb)->impIdent.identSuffix[1] = UDF_OS_ID_LINUX;
+ if (!bh)
+ return;
+
+ lvid = (struct logicalVolIntegrityDesc *)bh->b_data;
+
+ if (lvid->integrityType == LVID_INTEGRITY_TYPE_OPEN) {
+ struct logicalVolIntegrityDescImpUse *lvidiu =
+ udf_sb_lvidiu(sbi);
+ lvidiu->impIdent.identSuffix[0] = UDF_OS_CLASS_UNIX;
+ lvidiu->impIdent.identSuffix[1] = UDF_OS_ID_LINUX;
if (udf_time_to_stamp(&cpu_time, CURRENT_TIME))
- UDF_SB_LVID(sb)->recordingDateAndTime = cpu_to_lets(cpu_time);
- if (UDF_MAX_WRITE_VERSION > le16_to_cpu(UDF_SB_LVIDIU(sb)->maxUDFWriteRev))
- UDF_SB_LVIDIU(sb)->maxUDFWriteRev = cpu_to_le16(UDF_MAX_WRITE_VERSION);
- if (UDF_SB_UDFREV(sb) > le16_to_cpu(UDF_SB_LVIDIU(sb)->minUDFReadRev))
- UDF_SB_LVIDIU(sb)->minUDFReadRev = cpu_to_le16(UDF_SB_UDFREV(sb));
- if (UDF_SB_UDFREV(sb) > le16_to_cpu(UDF_SB_LVIDIU(sb)->minUDFWriteRev))
- UDF_SB_LVIDIU(sb)->minUDFWriteRev = cpu_to_le16(UDF_SB_UDFREV(sb));
- UDF_SB_LVID(sb)->integrityType = cpu_to_le32(LVID_INTEGRITY_TYPE_CLOSE);
+ lvid->recordingDateAndTime = cpu_to_lets(cpu_time);
+ if (UDF_MAX_WRITE_VERSION > le16_to_cpu(lvidiu->maxUDFWriteRev))
+ lvidiu->maxUDFWriteRev =
+ cpu_to_le16(UDF_MAX_WRITE_VERSION);
+ if (sbi->s_udfrev > le16_to_cpu(lvidiu->minUDFReadRev))
+ lvidiu->minUDFReadRev = cpu_to_le16(sbi->s_udfrev);
+ if (sbi->s_udfrev > le16_to_cpu(lvidiu->minUDFWriteRev))
+ lvidiu->minUDFWriteRev = cpu_to_le16(sbi->s_udfrev);
+ lvid->integrityType = cpu_to_le32(LVID_INTEGRITY_TYPE_CLOSE);
- UDF_SB_LVID(sb)->descTag.descCRC =
- cpu_to_le16(udf_crc((char *)UDF_SB_LVID(sb) + sizeof(tag),
- le16_to_cpu(UDF_SB_LVID(sb)->descTag.descCRCLength), 0));
+ lvid->descTag.descCRC = cpu_to_le16(
+ udf_crc((char *)lvid + sizeof(tag),
+ le16_to_cpu(lvid->descTag.descCRCLength),
+ 0));
- UDF_SB_LVID(sb)->descTag.tagChecksum = 0;
- for (i = 0; i < 16; i++)
- if (i != 4)
- UDF_SB_LVID(sb)->descTag.tagChecksum +=
- ((uint8_t *)&(UDF_SB_LVID(sb)->descTag))[i];
-
- mark_buffer_dirty(UDF_SB_LVIDBH(sb));
+ lvid->descTag.tagChecksum = udf_tag_checksum(&lvid->descTag);
+ mark_buffer_dirty(bh);
}
}
+static void udf_sb_free_bitmap(struct udf_bitmap *bitmap)
+{
+ int i;
+ int nr_groups = bitmap->s_nr_groups;
+ int size = sizeof(struct udf_bitmap) + (sizeof(struct buffer_head *) *
+ nr_groups);
+
+ for (i = 0; i < nr_groups; i++)
+ if (bitmap->s_block_bitmap[i])
+ brelse(bitmap->s_block_bitmap[i]);
+
+ if (size <= PAGE_SIZE)
+ kfree(bitmap);
+ else
+ vfree(bitmap);
+}
+
/*
* udf_read_super
*
@@ -1426,16 +1737,15 @@
uopt.gid = -1;
uopt.umask = 0;
- sbi = kmalloc(sizeof(struct udf_sb_info), GFP_KERNEL);
+ sbi = kzalloc(sizeof(struct udf_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
sb->s_fs_info = sbi;
- memset(UDF_SB(sb), 0x00, sizeof(struct udf_sb_info));
mutex_init(&sbi->s_alloc_mutex);
- if (!udf_parse_options((char *)options, &uopt))
+ if (!udf_parse_options((char *)options, &uopt, false))
goto error_out;
if (uopt.flags & (1 << UDF_FLAG_UTF8) &&
@@ -1459,30 +1769,31 @@
fileset.logicalBlockNum = 0xFFFFFFFF;
fileset.partitionReferenceNum = 0xFFFF;
- UDF_SB(sb)->s_flags = uopt.flags;
- UDF_SB(sb)->s_uid = uopt.uid;
- UDF_SB(sb)->s_gid = uopt.gid;
- UDF_SB(sb)->s_umask = uopt.umask;
- UDF_SB(sb)->s_nls_map = uopt.nls_map;
+ sbi->s_flags = uopt.flags;
+ sbi->s_uid = uopt.uid;
+ sbi->s_gid = uopt.gid;
+ sbi->s_umask = uopt.umask;
+ sbi->s_nls_map = uopt.nls_map;
/* Set the block size for all transfers */
if (!udf_set_blocksize(sb, uopt.blocksize))
goto error_out;
if (uopt.session == 0xFFFFFFFF)
- UDF_SB_SESSION(sb) = udf_get_last_session(sb);
+ sbi->s_session = udf_get_last_session(sb);
else
- UDF_SB_SESSION(sb) = uopt.session;
+ sbi->s_session = uopt.session;
- udf_debug("Multi-session=%d\n", UDF_SB_SESSION(sb));
+ udf_debug("Multi-session=%d\n", sbi->s_session);
- UDF_SB_LASTBLOCK(sb) = uopt.lastblock;
- UDF_SB_ANCHOR(sb)[0] = UDF_SB_ANCHOR(sb)[1] = 0;
- UDF_SB_ANCHOR(sb)[2] = uopt.anchor;
- UDF_SB_ANCHOR(sb)[3] = 256;
+ sbi->s_last_block = uopt.lastblock;
+ sbi->s_anchor[0] = sbi->s_anchor[1] = 0;
+ sbi->s_anchor[2] = uopt.anchor;
+ sbi->s_anchor[3] = 256;
- if (udf_check_valid(sb, uopt.novrs, silent)) { /* read volume recognition sequences */
- printk("UDF-fs: No VRS found\n");
+ if (udf_check_valid(sb, uopt.novrs, silent)) {
+ /* read volume recognition sequences */
+ printk(KERN_WARNING "UDF-fs: No VRS found\n");
goto error_out;
}
@@ -1496,27 +1807,30 @@
sb->s_time_gran = 1000;
if (udf_load_partition(sb, &fileset)) {
- printk("UDF-fs: No partition found (1)\n");
+ printk(KERN_WARNING "UDF-fs: No partition found (1)\n");
goto error_out;
}
- udf_debug("Lastblock=%d\n", UDF_SB_LASTBLOCK(sb));
+ udf_debug("Lastblock=%d\n", sbi->s_last_block);
- if (UDF_SB_LVIDBH(sb)) {
- uint16_t minUDFReadRev = le16_to_cpu(UDF_SB_LVIDIU(sb)->minUDFReadRev);
- uint16_t minUDFWriteRev = le16_to_cpu(UDF_SB_LVIDIU(sb)->minUDFWriteRev);
- /* uint16_t maxUDFWriteRev = le16_to_cpu(UDF_SB_LVIDIU(sb)->maxUDFWriteRev); */
+ if (sbi->s_lvid_bh) {
+ struct logicalVolIntegrityDescImpUse *lvidiu =
+ udf_sb_lvidiu(sbi);
+ uint16_t minUDFReadRev = le16_to_cpu(lvidiu->minUDFReadRev);
+ uint16_t minUDFWriteRev = le16_to_cpu(lvidiu->minUDFWriteRev);
+ /* uint16_t maxUDFWriteRev =
+ le16_to_cpu(lvidiu->maxUDFWriteRev); */
if (minUDFReadRev > UDF_MAX_READ_VERSION) {
- printk("UDF-fs: minUDFReadRev=%x (max is %x)\n",
- le16_to_cpu(UDF_SB_LVIDIU(sb)->minUDFReadRev),
+ printk(KERN_ERR "UDF-fs: minUDFReadRev=%x "
+ "(max is %x)\n",
+ le16_to_cpu(lvidiu->minUDFReadRev),
UDF_MAX_READ_VERSION);
goto error_out;
- } else if (minUDFWriteRev > UDF_MAX_WRITE_VERSION) {
+ } else if (minUDFWriteRev > UDF_MAX_WRITE_VERSION)
sb->s_flags |= MS_RDONLY;
- }
- UDF_SB_UDFREV(sb) = minUDFWriteRev;
+ sbi->s_udfrev = minUDFWriteRev;
if (minUDFReadRev >= UDF_VERS_USE_EXTENDED_FE)
UDF_SET_FLAG(sb, UDF_FLAG_USE_EXTENDED_FE);
@@ -1524,29 +1838,30 @@
UDF_SET_FLAG(sb, UDF_FLAG_USE_STREAMS);
}
- if (!UDF_SB_NUMPARTS(sb)) {
- printk("UDF-fs: No partition found (2)\n");
+ if (!sbi->s_partitions) {
+ printk(KERN_WARNING "UDF-fs: No partition found (2)\n");
goto error_out;
}
- if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_READ_ONLY) {
- printk("UDF-fs: Partition marked readonly; forcing readonly mount\n");
+ if (sbi->s_partmaps[sbi->s_partition].s_partition_flags &
+ UDF_PART_FLAG_READ_ONLY) {
+ printk(KERN_NOTICE "UDF-fs: Partition marked readonly; "
+ "forcing readonly mount\n");
sb->s_flags |= MS_RDONLY;
}
if (udf_find_fileset(sb, &fileset, &rootdir)) {
- printk("UDF-fs: No fileset found\n");
+ printk(KERN_WARNING "UDF-fs: No fileset found\n");
goto error_out;
}
if (!silent) {
kernel_timestamp ts;
- udf_time_to_stamp(&ts, UDF_SB_RECORDTIME(sb));
- udf_info("UDF %s (%s) Mounting volume '%s', "
+ udf_time_to_stamp(&ts, sbi->s_record_time);
+ udf_info("UDF: Mounting volume '%s', "
"timestamp %04u/%02u/%02u %02u:%02u (%x)\n",
- UDFFS_VERSION, UDFFS_DATE,
- UDF_SB_VOLIDENT(sb), ts.year, ts.month, ts.day, ts.hour, ts.minute,
- ts.typeAndTimezone);
+ sbi->s_volume_ident, ts.year, ts.month, ts.day,
+ ts.hour, ts.minute, ts.typeAndTimezone);
}
if (!(sb->s_flags & MS_RDONLY))
udf_open_lvid(sb);
@@ -1556,7 +1871,8 @@
/* perhaps it's not extensible enough, but for now ... */
inode = udf_iget(sb, rootdir);
if (!inode) {
- printk("UDF-fs: Error in udf_iget, block=%d, partition=%d\n",
+ printk(KERN_ERR "UDF-fs: Error in udf_iget, block=%d, "
+ "partition=%d\n",
rootdir.logicalBlockNum, rootdir.partitionReferenceNum);
goto error_out;
}
@@ -1564,7 +1880,7 @@
/* Allocate a dentry for the root inode */
sb->s_root = d_alloc_root(inode);
if (!sb->s_root) {
- printk("UDF-fs: Couldn't allocate root dentry\n");
+ printk(KERN_ERR "UDF-fs: Couldn't allocate root dentry\n");
iput(inode);
goto error_out;
}
@@ -1572,30 +1888,32 @@
return 0;
error_out:
- if (UDF_SB_VAT(sb))
- iput(UDF_SB_VAT(sb));
- if (UDF_SB_NUMPARTS(sb)) {
- if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_UNALLOC_TABLE)
- iput(UDF_SB_PARTMAPS(sb)[UDF_SB_PARTITION(sb)].s_uspace.s_table);
- if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_FREED_TABLE)
- iput(UDF_SB_PARTMAPS(sb)[UDF_SB_PARTITION(sb)].s_fspace.s_table);
- if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_UNALLOC_BITMAP)
- UDF_SB_FREE_BITMAP(sb,UDF_SB_PARTITION(sb), s_uspace);
- if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_FREED_BITMAP)
- UDF_SB_FREE_BITMAP(sb,UDF_SB_PARTITION(sb), s_fspace);
- if (UDF_SB_PARTTYPE(sb, UDF_SB_PARTITION(sb)) == UDF_SPARABLE_MAP15) {
+ if (sbi->s_vat_inode)
+ iput(sbi->s_vat_inode);
+ if (sbi->s_partitions) {
+ struct udf_part_map *map = &sbi->s_partmaps[sbi->s_partition];
+ if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_TABLE)
+ iput(map->s_uspace.s_table);
+ if (map->s_partition_flags & UDF_PART_FLAG_FREED_TABLE)
+ iput(map->s_fspace.s_table);
+ if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_BITMAP)
+ udf_sb_free_bitmap(map->s_uspace.s_bitmap);
+ if (map->s_partition_flags & UDF_PART_FLAG_FREED_BITMAP)
+ udf_sb_free_bitmap(map->s_fspace.s_bitmap);
+ if (map->s_partition_type == UDF_SPARABLE_MAP15)
for (i = 0; i < 4; i++)
- brelse(UDF_SB_TYPESPAR(sb, UDF_SB_PARTITION(sb)).s_spar_map[i]);
- }
+ brelse(map->s_type_specific.s_sparing.
+ s_spar_map[i]);
}
#ifdef CONFIG_UDF_NLS
if (UDF_QUERY_FLAG(sb, UDF_FLAG_NLS_MAP))
- unload_nls(UDF_SB(sb)->s_nls_map);
+ unload_nls(sbi->s_nls_map);
#endif
if (!(sb->s_flags & MS_RDONLY))
udf_close_lvid(sb);
- brelse(UDF_SB_LVIDBH(sb));
- UDF_SB_FREE(sb);
+ brelse(sbi->s_lvid_bh);
+
+ kfree(sbi->s_partmaps);
kfree(sbi);
sb->s_fs_info = NULL;
@@ -1614,7 +1932,7 @@
va_start(args, fmt);
vsnprintf(error_buf, sizeof(error_buf), fmt, args);
va_end(args);
- printk (KERN_CRIT "UDF-fs error (device %s): %s: %s\n",
+ printk(KERN_CRIT "UDF-fs error (device %s): %s: %s\n",
sb->s_id, function, error_buf);
}
@@ -1646,31 +1964,34 @@
static void udf_put_super(struct super_block *sb)
{
int i;
+ struct udf_sb_info *sbi;
- if (UDF_SB_VAT(sb))
- iput(UDF_SB_VAT(sb));
- if (UDF_SB_NUMPARTS(sb)) {
- if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_UNALLOC_TABLE)
- iput(UDF_SB_PARTMAPS(sb)[UDF_SB_PARTITION(sb)].s_uspace.s_table);
- if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_FREED_TABLE)
- iput(UDF_SB_PARTMAPS(sb)[UDF_SB_PARTITION(sb)].s_fspace.s_table);
- if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_UNALLOC_BITMAP)
- UDF_SB_FREE_BITMAP(sb,UDF_SB_PARTITION(sb), s_uspace);
- if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_FREED_BITMAP)
- UDF_SB_FREE_BITMAP(sb,UDF_SB_PARTITION(sb), s_fspace);
- if (UDF_SB_PARTTYPE(sb, UDF_SB_PARTITION(sb)) == UDF_SPARABLE_MAP15) {
+ sbi = UDF_SB(sb);
+ if (sbi->s_vat_inode)
+ iput(sbi->s_vat_inode);
+ if (sbi->s_partitions) {
+ struct udf_part_map *map = &sbi->s_partmaps[sbi->s_partition];
+ if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_TABLE)
+ iput(map->s_uspace.s_table);
+ if (map->s_partition_flags & UDF_PART_FLAG_FREED_TABLE)
+ iput(map->s_fspace.s_table);
+ if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_BITMAP)
+ udf_sb_free_bitmap(map->s_uspace.s_bitmap);
+ if (map->s_partition_flags & UDF_PART_FLAG_FREED_BITMAP)
+ udf_sb_free_bitmap(map->s_fspace.s_bitmap);
+ if (map->s_partition_type == UDF_SPARABLE_MAP15)
for (i = 0; i < 4; i++)
- brelse(UDF_SB_TYPESPAR(sb, UDF_SB_PARTITION(sb)).s_spar_map[i]);
- }
+ brelse(map->s_type_specific.s_sparing.
+ s_spar_map[i]);
}
#ifdef CONFIG_UDF_NLS
if (UDF_QUERY_FLAG(sb, UDF_FLAG_NLS_MAP))
- unload_nls(UDF_SB(sb)->s_nls_map);
+ unload_nls(sbi->s_nls_map);
#endif
if (!(sb->s_flags & MS_RDONLY))
udf_close_lvid(sb);
- brelse(UDF_SB_LVIDBH(sb));
- UDF_SB_FREE(sb);
+ brelse(sbi->s_lvid_bh);
+ kfree(sbi->s_partmaps);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
}
@@ -1691,15 +2012,22 @@
static int udf_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct super_block *sb = dentry->d_sb;
+ struct udf_sb_info *sbi = UDF_SB(sb);
+ struct logicalVolIntegrityDescImpUse *lvidiu;
+
+ if (sbi->s_lvid_bh != NULL)
+ lvidiu = udf_sb_lvidiu(sbi);
+ else
+ lvidiu = NULL;
buf->f_type = UDF_SUPER_MAGIC;
buf->f_bsize = sb->s_blocksize;
- buf->f_blocks = UDF_SB_PARTLEN(sb, UDF_SB_PARTITION(sb));
+ buf->f_blocks = sbi->s_partmaps[sbi->s_partition].s_partition_len;
buf->f_bfree = udf_count_free(sb);
buf->f_bavail = buf->f_bfree;
- buf->f_files = (UDF_SB_LVIDBH(sb) ?
- (le32_to_cpu(UDF_SB_LVIDIU(sb)->numFiles) +
- le32_to_cpu(UDF_SB_LVIDIU(sb)->numDirs)) : 0) + buf->f_bfree;
+ buf->f_files = (lvidiu != NULL ? (le32_to_cpu(lvidiu->numFiles) +
+ le32_to_cpu(lvidiu->numDirs)) : 0)
+ + buf->f_bfree;
buf->f_ffree = buf->f_bfree;
/* __kernel_fsid_t f_fsid */
buf->f_namelen = UDF_NAME_LEN - 2;
@@ -1711,7 +2039,8 @@
0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4
};
-static unsigned int udf_count_free_bitmap(struct super_block *sb, struct udf_bitmap *bitmap)
+static unsigned int udf_count_free_bitmap(struct super_block *sb,
+ struct udf_bitmap *bitmap)
{
struct buffer_head *bh = NULL;
unsigned int accum = 0;
@@ -1727,7 +2056,7 @@
lock_kernel();
loc.logicalBlockNum = bitmap->s_extPosition;
- loc.partitionReferenceNum = UDF_SB_PARTITION(sb);
+ loc.partitionReferenceNum = UDF_SB(sb)->s_partition;
bh = udf_read_ptagged(sb, loc, 0, &ident);
if (!bh) {
@@ -1772,7 +2101,8 @@
return accum;
}
-static unsigned int udf_count_free_table(struct super_block *sb, struct inode *table)
+static unsigned int udf_count_free_table(struct super_block *sb,
+ struct inode *table)
{
unsigned int accum = 0;
uint32_t elen;
@@ -1782,13 +2112,13 @@
lock_kernel();
- epos.block = UDF_I_LOCATION(table);
+ epos.block = UDF_I(table)->i_location;
epos.offset = sizeof(struct unallocSpaceEntry);
epos.bh = NULL;
- while ((etype = udf_next_aext(table, &epos, &eloc, &elen, 1)) != -1) {
+ while ((etype = udf_next_aext(table, &epos, &eloc, &elen, 1)) != -1)
accum += (elen >> table->i_sb->s_blocksize_bits);
- }
+
brelse(epos.bh);
unlock_kernel();
@@ -1799,10 +2129,17 @@
static unsigned int udf_count_free(struct super_block *sb)
{
unsigned int accum = 0;
+ struct udf_sb_info *sbi;
+ struct udf_part_map *map;
- if (UDF_SB_LVIDBH(sb)) {
- if (le32_to_cpu(UDF_SB_LVID(sb)->numOfPartitions) > UDF_SB_PARTITION(sb)) {
- accum = le32_to_cpu(UDF_SB_LVID(sb)->freeSpaceTable[UDF_SB_PARTITION(sb)]);
+ sbi = UDF_SB(sb);
+ if (sbi->s_lvid_bh) {
+ struct logicalVolIntegrityDesc *lvid =
+ (struct logicalVolIntegrityDesc *)
+ sbi->s_lvid_bh->b_data;
+ if (le32_to_cpu(lvid->numOfPartitions) > sbi->s_partition) {
+ accum = le32_to_cpu(
+ lvid->freeSpaceTable[sbi->s_partition]);
if (accum == 0xFFFFFFFF)
accum = 0;
}
@@ -1811,24 +2148,25 @@
if (accum)
return accum;
- if (UDF_SB_PARTFLAGS(sb,UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_UNALLOC_BITMAP) {
+ map = &sbi->s_partmaps[sbi->s_partition];
+ if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_BITMAP) {
accum += udf_count_free_bitmap(sb,
- UDF_SB_PARTMAPS(sb)[UDF_SB_PARTITION(sb)].s_uspace.s_bitmap);
+ map->s_uspace.s_bitmap);
}
- if (UDF_SB_PARTFLAGS(sb,UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_FREED_BITMAP) {
+ if (map->s_partition_flags & UDF_PART_FLAG_FREED_BITMAP) {
accum += udf_count_free_bitmap(sb,
- UDF_SB_PARTMAPS(sb)[UDF_SB_PARTITION(sb)].s_fspace.s_bitmap);
+ map->s_fspace.s_bitmap);
}
if (accum)
return accum;
- if (UDF_SB_PARTFLAGS(sb,UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_UNALLOC_TABLE) {
+ if (map->s_partition_flags & UDF_PART_FLAG_UNALLOC_TABLE) {
accum += udf_count_free_table(sb,
- UDF_SB_PARTMAPS(sb)[UDF_SB_PARTITION(sb)].s_uspace.s_table);
+ map->s_uspace.s_table);
}
- if (UDF_SB_PARTFLAGS(sb,UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_FREED_TABLE) {
+ if (map->s_partition_flags & UDF_PART_FLAG_FREED_TABLE) {
accum += udf_count_free_table(sb,
- UDF_SB_PARTMAPS(sb)[UDF_SB_PARTITION(sb)].s_fspace.s_table);
+ map->s_fspace.s_table);
}
return accum;
diff --git a/fs/udf/symlink.c b/fs/udf/symlink.c
index e6f933d..6ec9922 100644
--- a/fs/udf/symlink.c
+++ b/fs/udf/symlink.c
@@ -33,7 +33,8 @@
#include <linux/buffer_head.h>
#include "udf_i.h"
-static void udf_pc_to_char(struct super_block *sb, char *from, int fromlen, char *to)
+static void udf_pc_to_char(struct super_block *sb, char *from, int fromlen,
+ char *to)
{
struct pathComponent *pc;
int elen = 0;
@@ -78,10 +79,12 @@
char *symlink;
int err = -EIO;
char *p = kmap(page);
+ struct udf_inode_info *iinfo;
lock_kernel();
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB) {
- symlink = UDF_I_DATA(inode) + UDF_I_LENEATTR(inode);
+ iinfo = UDF_I(inode);
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
+ symlink = iinfo->i_ext.i_data + iinfo->i_lenEAttr;
} else {
bh = sb_bread(inode->i_sb, udf_block_map(inode, 0));
diff --git a/fs/udf/truncate.c b/fs/udf/truncate.c
index 7fc3912..fe61be1 100644
--- a/fs/udf/truncate.c
+++ b/fs/udf/truncate.c
@@ -74,17 +74,18 @@
uint64_t lbcount = 0;
int8_t etype = -1, netype;
int adsize;
+ struct udf_inode_info *iinfo = UDF_I(inode);
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB ||
- inode->i_size == UDF_I_LENEXTENTS(inode))
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB ||
+ inode->i_size == iinfo->i_lenExtents)
return;
/* Are we going to delete the file anyway? */
if (inode->i_nlink == 0)
return;
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_SHORT)
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
adsize = sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_LONG)
+ else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
adsize = sizeof(long_ad);
else
BUG();
@@ -117,7 +118,7 @@
}
/* This inode entry is in-memory only and thus we don't have to mark
* the inode dirty */
- UDF_I_LENEXTENTS(inode) = inode->i_size;
+ iinfo->i_lenExtents = inode->i_size;
brelse(epos.bh);
}
@@ -129,19 +130,20 @@
uint64_t lbcount = 0;
int8_t etype = -1, netype;
int adsize;
+ struct udf_inode_info *iinfo = UDF_I(inode);
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB ||
- inode->i_size == UDF_I_LENEXTENTS(inode))
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB ||
+ inode->i_size == iinfo->i_lenExtents)
return;
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_SHORT)
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
adsize = sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_LONG)
+ else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
adsize = sizeof(long_ad);
else
adsize = 0;
- epos.block = UDF_I_LOCATION(inode);
+ epos.block = iinfo->i_location;
/* Find the last extent in the file */
while ((netype = udf_next_aext(inode, &epos, &eloc, &elen, 1)) != -1) {
@@ -153,8 +155,9 @@
lbcount -= elen;
extent_trunc(inode, &epos, eloc, etype, elen, 0);
if (!epos.bh) {
- UDF_I_LENALLOC(inode) =
- epos.offset - udf_file_entry_alloc_offset(inode);
+ iinfo->i_lenAlloc =
+ epos.offset -
+ udf_file_entry_alloc_offset(inode);
mark_inode_dirty(inode);
} else {
struct allocExtDesc *aed =
@@ -163,7 +166,7 @@
cpu_to_le32(epos.offset -
sizeof(struct allocExtDesc));
if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT) ||
- UDF_SB_UDFREV(inode->i_sb) >= 0x0201)
+ UDF_SB(inode->i_sb)->s_udfrev >= 0x0201)
udf_update_tag(epos.bh->b_data, epos.offset);
else
udf_update_tag(epos.bh->b_data,
@@ -173,7 +176,7 @@
}
/* This inode entry is in-memory only and thus we don't have to mark
* the inode dirty */
- UDF_I_LENEXTENTS(inode) = lbcount;
+ iinfo->i_lenExtents = lbcount;
brelse(epos.bh);
}
@@ -184,13 +187,15 @@
uint32_t elen, nelen = 0, indirect_ext_len = 0, lenalloc;
int8_t etype;
struct super_block *sb = inode->i_sb;
+ struct udf_sb_info *sbi = UDF_SB(sb);
sector_t first_block = inode->i_size >> sb->s_blocksize_bits, offset;
loff_t byte_offset;
int adsize;
+ struct udf_inode_info *iinfo = UDF_I(inode);
- if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_SHORT)
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
adsize = sizeof(short_ad);
- else if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_LONG)
+ else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
adsize = sizeof(long_ad);
else
BUG();
@@ -212,7 +217,8 @@
else
lenalloc -= sizeof(struct allocExtDesc);
- while ((etype = udf_current_aext(inode, &epos, &eloc, &elen, 0)) != -1) {
+ while ((etype = udf_current_aext(inode, &epos, &eloc,
+ &elen, 0)) != -1) {
if (etype == (EXT_NEXT_EXTENT_ALLOCDECS >> 30)) {
udf_write_aext(inode, &epos, neloc, nelen, 0);
if (indirect_ext_len) {
@@ -224,35 +230,43 @@
0, indirect_ext_len);
} else {
if (!epos.bh) {
- UDF_I_LENALLOC(inode) = lenalloc;
+ iinfo->i_lenAlloc =
+ lenalloc;
mark_inode_dirty(inode);
} else {
struct allocExtDesc *aed =
- (struct allocExtDesc *)(epos.bh->b_data);
+ (struct allocExtDesc *)
+ (epos.bh->b_data);
+ int len =
+ sizeof(struct allocExtDesc);
+
aed->lengthAllocDescs =
cpu_to_le32(lenalloc);
- if (!UDF_QUERY_FLAG(sb, UDF_FLAG_STRICT) ||
- UDF_SB_UDFREV(sb) >= 0x0201)
- udf_update_tag(epos.bh->b_data,
- lenalloc +
- sizeof(struct allocExtDesc));
- else
- udf_update_tag(epos.bh->b_data,
- sizeof(struct allocExtDesc));
- mark_buffer_dirty_inode(epos.bh, inode);
+ if (!UDF_QUERY_FLAG(sb,
+ UDF_FLAG_STRICT) ||
+ sbi->s_udfrev >= 0x0201)
+ len += lenalloc;
+
+ udf_update_tag(epos.bh->b_data,
+ len);
+ mark_buffer_dirty_inode(
+ epos.bh, inode);
}
}
brelse(epos.bh);
epos.offset = sizeof(struct allocExtDesc);
epos.block = eloc;
- epos.bh = udf_tread(sb, udf_get_lb_pblock(sb, eloc, 0));
+ epos.bh = udf_tread(sb,
+ udf_get_lb_pblock(sb, eloc, 0));
if (elen)
- indirect_ext_len = (elen + sb->s_blocksize -1) >>
+ indirect_ext_len =
+ (elen + sb->s_blocksize - 1) >>
sb->s_blocksize_bits;
else
indirect_ext_len = 1;
} else {
- extent_trunc(inode, &epos, eloc, etype, elen, 0);
+ extent_trunc(inode, &epos, eloc, etype,
+ elen, 0);
epos.offset += adsize;
}
}
@@ -264,19 +278,20 @@
indirect_ext_len);
} else {
if (!epos.bh) {
- UDF_I_LENALLOC(inode) = lenalloc;
+ iinfo->i_lenAlloc = lenalloc;
mark_inode_dirty(inode);
} else {
struct allocExtDesc *aed =
(struct allocExtDesc *)(epos.bh->b_data);
aed->lengthAllocDescs = cpu_to_le32(lenalloc);
if (!UDF_QUERY_FLAG(sb, UDF_FLAG_STRICT) ||
- UDF_SB_UDFREV(sb) >= 0x0201)
+ sbi->s_udfrev >= 0x0201)
udf_update_tag(epos.bh->b_data,
- lenalloc + sizeof(struct allocExtDesc));
+ lenalloc +
+ sizeof(struct allocExtDesc));
else
udf_update_tag(epos.bh->b_data,
- sizeof(struct allocExtDesc));
+ sizeof(struct allocExtDesc));
mark_buffer_dirty_inode(epos.bh, inode);
}
}
@@ -290,13 +305,16 @@
* extending the file by 'offset' blocks.
*/
if ((!epos.bh &&
- epos.offset == udf_file_entry_alloc_offset(inode)) ||
- (epos.bh && epos.offset == sizeof(struct allocExtDesc))) {
+ epos.offset ==
+ udf_file_entry_alloc_offset(inode)) ||
+ (epos.bh && epos.offset ==
+ sizeof(struct allocExtDesc))) {
/* File has no extents at all or has empty last
* indirect extent! Create a fake extent... */
extent.extLocation.logicalBlockNum = 0;
extent.extLocation.partitionReferenceNum = 0;
- extent.extLength = EXT_NOT_RECORDED_NOT_ALLOCATED;
+ extent.extLength =
+ EXT_NOT_RECORDED_NOT_ALLOCATED;
} else {
epos.offset -= adsize;
etype = udf_next_aext(inode, &epos,
@@ -305,10 +323,12 @@
extent.extLength |= etype << 30;
}
udf_extend_file(inode, &epos, &extent,
- offset + ((inode->i_size & (sb->s_blocksize - 1)) != 0));
+ offset +
+ ((inode->i_size &
+ (sb->s_blocksize - 1)) != 0));
}
}
- UDF_I_LENEXTENTS(inode) = inode->i_size;
+ iinfo->i_lenExtents = inode->i_size;
brelse(epos.bh);
}
diff --git a/fs/udf/udf_i.h b/fs/udf/udf_i.h
index d7dbe6f..ccc52f1 100644
--- a/fs/udf/udf_i.h
+++ b/fs/udf/udf_i.h
@@ -7,20 +7,4 @@
return list_entry(inode, struct udf_inode_info, vfs_inode);
}
-#define UDF_I_LOCATION(X) ( UDF_I(X)->i_location )
-#define UDF_I_LENEATTR(X) ( UDF_I(X)->i_lenEAttr )
-#define UDF_I_LENALLOC(X) ( UDF_I(X)->i_lenAlloc )
-#define UDF_I_LENEXTENTS(X) ( UDF_I(X)->i_lenExtents )
-#define UDF_I_UNIQUE(X) ( UDF_I(X)->i_unique )
-#define UDF_I_ALLOCTYPE(X) ( UDF_I(X)->i_alloc_type )
-#define UDF_I_EFE(X) ( UDF_I(X)->i_efe )
-#define UDF_I_USE(X) ( UDF_I(X)->i_use )
-#define UDF_I_STRAT4096(X) ( UDF_I(X)->i_strat4096 )
-#define UDF_I_NEXT_ALLOC_BLOCK(X) ( UDF_I(X)->i_next_alloc_block )
-#define UDF_I_NEXT_ALLOC_GOAL(X) ( UDF_I(X)->i_next_alloc_goal )
-#define UDF_I_CRTIME(X) ( UDF_I(X)->i_crtime )
-#define UDF_I_SAD(X) ( UDF_I(X)->i_ext.i_sad )
-#define UDF_I_LAD(X) ( UDF_I(X)->i_ext.i_lad )
-#define UDF_I_DATA(X) ( UDF_I(X)->i_ext.i_data )
-
#endif /* !defined(_LINUX_UDF_I_H) */
diff --git a/fs/udf/udf_sb.h b/fs/udf/udf_sb.h
index 3c29820..737d1c6 100644
--- a/fs/udf/udf_sb.h
+++ b/fs/udf/udf_sb.h
@@ -26,6 +26,8 @@
#define UDF_FLAG_GID_IGNORE 14
#define UDF_FLAG_UID_SET 15
#define UDF_FLAG_GID_SET 16
+#define UDF_FLAG_SESSION_SET 17
+#define UDF_FLAG_LASTBLOCK_SET 18
#define UDF_PART_FLAG_UNALLOC_BITMAP 0x0001
#define UDF_PART_FLAG_UNALLOC_TABLE 0x0002
@@ -41,96 +43,12 @@
return sb->s_fs_info;
}
-#define UDF_SB_FREE(X)\
-{\
- if (UDF_SB(X)) {\
- kfree(UDF_SB_PARTMAPS(X));\
- UDF_SB_PARTMAPS(X) = NULL;\
- }\
-}
+struct logicalVolIntegrityDescImpUse *udf_sb_lvidiu(struct udf_sb_info *sbi);
-#define UDF_SB_ALLOC_PARTMAPS(X,Y)\
-{\
- UDF_SB_PARTMAPS(X) = kmalloc(sizeof(struct udf_part_map) * Y, GFP_KERNEL);\
- if (UDF_SB_PARTMAPS(X) != NULL) {\
- UDF_SB_NUMPARTS(X) = Y;\
- memset(UDF_SB_PARTMAPS(X), 0x00, sizeof(struct udf_part_map) * Y);\
- } else {\
- UDF_SB_NUMPARTS(X) = 0;\
- udf_error(X, __FUNCTION__, "Unable to allocate space for %d partition maps", Y);\
- }\
-}
-
-#define UDF_SB_ALLOC_BITMAP(X,Y,Z)\
-{\
- int nr_groups = ((UDF_SB_PARTLEN((X),(Y)) + (sizeof(struct spaceBitmapDesc) << 3) +\
- ((X)->s_blocksize * 8) - 1) / ((X)->s_blocksize * 8));\
- int size = sizeof(struct udf_bitmap) + (sizeof(struct buffer_head *) * nr_groups);\
- if (size <= PAGE_SIZE)\
- UDF_SB_PARTMAPS(X)[(Y)].Z.s_bitmap = kmalloc(size, GFP_KERNEL);\
- else\
- UDF_SB_PARTMAPS(X)[(Y)].Z.s_bitmap = vmalloc(size);\
- if (UDF_SB_PARTMAPS(X)[(Y)].Z.s_bitmap != NULL) {\
- memset(UDF_SB_PARTMAPS(X)[(Y)].Z.s_bitmap, 0x00, size);\
- UDF_SB_PARTMAPS(X)[(Y)].Z.s_bitmap->s_block_bitmap =\
- (struct buffer_head **)(UDF_SB_PARTMAPS(X)[(Y)].Z.s_bitmap + 1);\
- UDF_SB_PARTMAPS(X)[(Y)].Z.s_bitmap->s_nr_groups = nr_groups;\
- } else {\
- udf_error(X, __FUNCTION__, "Unable to allocate space for bitmap and %d buffer_head pointers", nr_groups);\
- }\
-}
-
-#define UDF_SB_FREE_BITMAP(X,Y,Z)\
-{\
- int i;\
- int nr_groups = UDF_SB_BITMAP_NR_GROUPS(X,Y,Z);\
- int size = sizeof(struct udf_bitmap) + (sizeof(struct buffer_head *) * nr_groups);\
- for (i = 0; i < nr_groups; i++) {\
- if (UDF_SB_BITMAP(X,Y,Z,i))\
- brelse(UDF_SB_BITMAP(X,Y,Z,i));\
- }\
- if (size <= PAGE_SIZE)\
- kfree(UDF_SB_PARTMAPS(X)[Y].Z.s_bitmap);\
- else\
- vfree(UDF_SB_PARTMAPS(X)[Y].Z.s_bitmap);\
-}
+int udf_compute_nr_groups(struct super_block *sb, u32 partition);
#define UDF_QUERY_FLAG(X,Y) ( UDF_SB(X)->s_flags & ( 1 << (Y) ) )
#define UDF_SET_FLAG(X,Y) ( UDF_SB(X)->s_flags |= ( 1 << (Y) ) )
#define UDF_CLEAR_FLAG(X,Y) ( UDF_SB(X)->s_flags &= ~( 1 << (Y) ) )
-#define UDF_UPDATE_UDFREV(X,Y) ( ((Y) > UDF_SB_UDFREV(X)) ? UDF_SB_UDFREV(X) = (Y) : UDF_SB_UDFREV(X) )
-
-#define UDF_SB_PARTMAPS(X) ( UDF_SB(X)->s_partmaps )
-#define UDF_SB_PARTTYPE(X,Y) ( UDF_SB_PARTMAPS(X)[(Y)].s_partition_type )
-#define UDF_SB_PARTROOT(X,Y) ( UDF_SB_PARTMAPS(X)[(Y)].s_partition_root )
-#define UDF_SB_PARTLEN(X,Y) ( UDF_SB_PARTMAPS(X)[(Y)].s_partition_len )
-#define UDF_SB_PARTVSN(X,Y) ( UDF_SB_PARTMAPS(X)[(Y)].s_volumeseqnum )
-#define UDF_SB_PARTNUM(X,Y) ( UDF_SB_PARTMAPS(X)[(Y)].s_partition_num )
-#define UDF_SB_TYPESPAR(X,Y) ( UDF_SB_PARTMAPS(X)[(Y)].s_type_specific.s_sparing )
-#define UDF_SB_TYPEVIRT(X,Y) ( UDF_SB_PARTMAPS(X)[(Y)].s_type_specific.s_virtual )
-#define UDF_SB_PARTFUNC(X,Y) ( UDF_SB_PARTMAPS(X)[(Y)].s_partition_func )
-#define UDF_SB_PARTFLAGS(X,Y) ( UDF_SB_PARTMAPS(X)[(Y)].s_partition_flags )
-#define UDF_SB_BITMAP(X,Y,Z,I) ( UDF_SB_PARTMAPS(X)[(Y)].Z.s_bitmap->s_block_bitmap[I] )
-#define UDF_SB_BITMAP_NR_GROUPS(X,Y,Z) ( UDF_SB_PARTMAPS(X)[(Y)].Z.s_bitmap->s_nr_groups )
-
-#define UDF_SB_VOLIDENT(X) ( UDF_SB(X)->s_volident )
-#define UDF_SB_NUMPARTS(X) ( UDF_SB(X)->s_partitions )
-#define UDF_SB_PARTITION(X) ( UDF_SB(X)->s_partition )
-#define UDF_SB_SESSION(X) ( UDF_SB(X)->s_session )
-#define UDF_SB_ANCHOR(X) ( UDF_SB(X)->s_anchor )
-#define UDF_SB_LASTBLOCK(X) ( UDF_SB(X)->s_lastblock )
-#define UDF_SB_LVIDBH(X) ( UDF_SB(X)->s_lvidbh )
-#define UDF_SB_LVID(X) ( (struct logicalVolIntegrityDesc *)UDF_SB_LVIDBH(X)->b_data )
-#define UDF_SB_LVIDIU(X) ( (struct logicalVolIntegrityDescImpUse *)&(UDF_SB_LVID(X)->impUse[le32_to_cpu(UDF_SB_LVID(X)->numOfPartitions) * 2 * sizeof(uint32_t)/sizeof(uint8_t)]) )
-
-#define UDF_SB_UMASK(X) ( UDF_SB(X)->s_umask )
-#define UDF_SB_GID(X) ( UDF_SB(X)->s_gid )
-#define UDF_SB_UID(X) ( UDF_SB(X)->s_uid )
-#define UDF_SB_RECORDTIME(X) ( UDF_SB(X)->s_recordtime )
-#define UDF_SB_SERIALNUM(X) ( UDF_SB(X)->s_serialnum )
-#define UDF_SB_UDFREV(X) ( UDF_SB(X)->s_udfrev )
-#define UDF_SB_FLAGS(X) ( UDF_SB(X)->s_flags )
-#define UDF_SB_VAT(X) ( UDF_SB(X)->s_vat )
-
#endif /* __LINUX_UDF_SB_H */
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index c8016cc..681dc2b 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -24,18 +24,21 @@
#define UDF_PATH_LEN 1023
#define udf_file_entry_alloc_offset(inode)\
- (UDF_I_USE(inode) ?\
+ (UDF_I(inode)->i_use ?\
sizeof(struct unallocSpaceEntry) :\
- ((UDF_I_EFE(inode) ?\
+ ((UDF_I(inode)->i_efe ?\
sizeof(struct extendedFileEntry) :\
- sizeof(struct fileEntry)) + UDF_I_LENEATTR(inode)))
+ sizeof(struct fileEntry)) + UDF_I(inode)->i_lenEAttr))
#define udf_ext0_offset(inode)\
- (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB ?\
+ (UDF_I(inode)->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB ?\
udf_file_entry_alloc_offset(inode) : 0)
#define udf_get_lb_pblock(sb,loc,offset) udf_get_pblock((sb), (loc).logicalBlockNum, (loc).partitionReferenceNum, (offset))
+/* computes tag checksum */
+u8 udf_tag_checksum(const tag *t);
+
struct dentry;
struct inode;
struct task_struct;
@@ -185,8 +188,8 @@
sector_t *);
extern struct fileIdentDesc *udf_get_fileident(void *buffer, int bufsize,
int *offset);
-extern long_ad *udf_get_filelongad(uint8_t *, int, int *, int);
-extern short_ad *udf_get_fileshortad(uint8_t *, int, int *, int);
+extern long_ad *udf_get_filelongad(uint8_t *, int, uint32_t *, int);
+extern short_ad *udf_get_fileshortad(uint8_t *, int, uint32_t *, int);
/* crc.c */
extern uint16_t udf_crc(uint8_t *, uint32_t, uint16_t);
diff --git a/fs/udf/udftime.c b/fs/udf/udftime.c
index adcb87c..ce59573 100644
--- a/fs/udf/udftime.c
+++ b/fs/udf/udftime.c
@@ -18,8 +18,10 @@
Boston, MA 02111-1307, USA. */
/*
- * dgb 10/02/98: ripped this from glibc source to help convert timestamps to unix time
- * 10/04/98: added new table-based lookup after seeing how ugly the gnu code is
+ * dgb 10/02/98: ripped this from glibc source to help convert timestamps
+ * to unix time
+ * 10/04/98: added new table-based lookup after seeing how ugly
+ * the gnu code is
* blf 09/27/99: ripped out all the old code and inserted new table from
* John Brockmeyer (without leap second corrections)
* rewrote udf_stamp_to_time and fixed timezone accounting in
@@ -55,27 +57,27 @@
#define MAX_YEAR_SECONDS 69
#define SPD 0x15180 /*3600*24 */
-#define SPY(y,l,s) (SPD * (365*y+l)+s)
+#define SPY(y, l, s) (SPD * (365 * y + l) + s)
-static time_t year_seconds[MAX_YEAR_SECONDS]= {
-/*1970*/ SPY( 0, 0,0), SPY( 1, 0,0), SPY( 2, 0,0), SPY( 3, 1,0),
-/*1974*/ SPY( 4, 1,0), SPY( 5, 1,0), SPY( 6, 1,0), SPY( 7, 2,0),
-/*1978*/ SPY( 8, 2,0), SPY( 9, 2,0), SPY(10, 2,0), SPY(11, 3,0),
-/*1982*/ SPY(12, 3,0), SPY(13, 3,0), SPY(14, 3,0), SPY(15, 4,0),
-/*1986*/ SPY(16, 4,0), SPY(17, 4,0), SPY(18, 4,0), SPY(19, 5,0),
-/*1990*/ SPY(20, 5,0), SPY(21, 5,0), SPY(22, 5,0), SPY(23, 6,0),
-/*1994*/ SPY(24, 6,0), SPY(25, 6,0), SPY(26, 6,0), SPY(27, 7,0),
-/*1998*/ SPY(28, 7,0), SPY(29, 7,0), SPY(30, 7,0), SPY(31, 8,0),
-/*2002*/ SPY(32, 8,0), SPY(33, 8,0), SPY(34, 8,0), SPY(35, 9,0),
-/*2006*/ SPY(36, 9,0), SPY(37, 9,0), SPY(38, 9,0), SPY(39,10,0),
-/*2010*/ SPY(40,10,0), SPY(41,10,0), SPY(42,10,0), SPY(43,11,0),
-/*2014*/ SPY(44,11,0), SPY(45,11,0), SPY(46,11,0), SPY(47,12,0),
-/*2018*/ SPY(48,12,0), SPY(49,12,0), SPY(50,12,0), SPY(51,13,0),
-/*2022*/ SPY(52,13,0), SPY(53,13,0), SPY(54,13,0), SPY(55,14,0),
-/*2026*/ SPY(56,14,0), SPY(57,14,0), SPY(58,14,0), SPY(59,15,0),
-/*2030*/ SPY(60,15,0), SPY(61,15,0), SPY(62,15,0), SPY(63,16,0),
-/*2034*/ SPY(64,16,0), SPY(65,16,0), SPY(66,16,0), SPY(67,17,0),
-/*2038*/ SPY(68,17,0)
+static time_t year_seconds[MAX_YEAR_SECONDS] = {
+/*1970*/ SPY(0, 0, 0), SPY(1, 0, 0), SPY(2, 0, 0), SPY(3, 1, 0),
+/*1974*/ SPY(4, 1, 0), SPY(5, 1, 0), SPY(6, 1, 0), SPY(7, 2, 0),
+/*1978*/ SPY(8, 2, 0), SPY(9, 2, 0), SPY(10, 2, 0), SPY(11, 3, 0),
+/*1982*/ SPY(12, 3, 0), SPY(13, 3, 0), SPY(14, 3, 0), SPY(15, 4, 0),
+/*1986*/ SPY(16, 4, 0), SPY(17, 4, 0), SPY(18, 4, 0), SPY(19, 5, 0),
+/*1990*/ SPY(20, 5, 0), SPY(21, 5, 0), SPY(22, 5, 0), SPY(23, 6, 0),
+/*1994*/ SPY(24, 6, 0), SPY(25, 6, 0), SPY(26, 6, 0), SPY(27, 7, 0),
+/*1998*/ SPY(28, 7, 0), SPY(29, 7, 0), SPY(30, 7, 0), SPY(31, 8, 0),
+/*2002*/ SPY(32, 8, 0), SPY(33, 8, 0), SPY(34, 8, 0), SPY(35, 9, 0),
+/*2006*/ SPY(36, 9, 0), SPY(37, 9, 0), SPY(38, 9, 0), SPY(39, 10, 0),
+/*2010*/ SPY(40, 10, 0), SPY(41, 10, 0), SPY(42, 10, 0), SPY(43, 11, 0),
+/*2014*/ SPY(44, 11, 0), SPY(45, 11, 0), SPY(46, 11, 0), SPY(47, 12, 0),
+/*2018*/ SPY(48, 12, 0), SPY(49, 12, 0), SPY(50, 12, 0), SPY(51, 13, 0),
+/*2022*/ SPY(52, 13, 0), SPY(53, 13, 0), SPY(54, 13, 0), SPY(55, 14, 0),
+/*2026*/ SPY(56, 14, 0), SPY(57, 14, 0), SPY(58, 14, 0), SPY(59, 15, 0),
+/*2030*/ SPY(60, 15, 0), SPY(61, 15, 0), SPY(62, 15, 0), SPY(63, 16, 0),
+/*2034*/ SPY(64, 16, 0), SPY(65, 16, 0), SPY(66, 16, 0), SPY(67, 17, 0),
+/*2038*/ SPY(68, 17, 0)
};
extern struct timezone sys_tz;
@@ -115,7 +117,7 @@
return dest;
}
-kernel_timestamp *udf_time_to_stamp(kernel_timestamp * dest, struct timespec ts)
+kernel_timestamp *udf_time_to_stamp(kernel_timestamp *dest, struct timespec ts)
{
long int days, rem, y;
const unsigned short int *ip;
@@ -137,7 +139,7 @@
dest->second = rem % 60;
y = 1970;
-#define DIV(a,b) ((a) / (b) - ((a) % (b) < 0))
+#define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
#define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
while (days < 0 || days >= (__isleap(y) ? 366 : 365)) {
@@ -145,8 +147,8 @@
/* Adjust DAYS and Y to match the guessed year. */
days -= ((yg - y) * 365
- + LEAPS_THRU_END_OF (yg - 1)
- - LEAPS_THRU_END_OF (y - 1));
+ + LEAPS_THRU_END_OF(yg - 1)
+ - LEAPS_THRU_END_OF(y - 1));
y = yg;
}
dest->year = y;
@@ -158,7 +160,8 @@
dest->day = days + 1;
dest->centiseconds = ts.tv_nsec / 10000000;
- dest->hundredsOfMicroseconds = (ts.tv_nsec / 1000 - dest->centiseconds * 10000) / 100;
+ dest->hundredsOfMicroseconds = (ts.tv_nsec / 1000 -
+ dest->centiseconds * 10000) / 100;
dest->microseconds = (ts.tv_nsec / 1000 - dest->centiseconds * 10000 -
dest->hundredsOfMicroseconds * 100);
return dest;
diff --git a/fs/udf/unicode.c b/fs/udf/unicode.c
index 9e6099c..e533b11 100644
--- a/fs/udf/unicode.c
+++ b/fs/udf/unicode.c
@@ -136,12 +136,18 @@
if (c < 0x80U) {
utf_o->u_name[utf_o->u_len++] = (uint8_t)c;
} else if (c < 0x800U) {
- utf_o->u_name[utf_o->u_len++] = (uint8_t)(0xc0 | (c >> 6));
- utf_o->u_name[utf_o->u_len++] = (uint8_t)(0x80 | (c & 0x3f));
+ utf_o->u_name[utf_o->u_len++] =
+ (uint8_t)(0xc0 | (c >> 6));
+ utf_o->u_name[utf_o->u_len++] =
+ (uint8_t)(0x80 | (c & 0x3f));
} else {
- utf_o->u_name[utf_o->u_len++] = (uint8_t)(0xe0 | (c >> 12));
- utf_o->u_name[utf_o->u_len++] = (uint8_t)(0x80 | ((c >> 6) & 0x3f));
- utf_o->u_name[utf_o->u_len++] = (uint8_t)(0x80 | (c & 0x3f));
+ utf_o->u_name[utf_o->u_len++] =
+ (uint8_t)(0xe0 | (c >> 12));
+ utf_o->u_name[utf_o->u_len++] =
+ (uint8_t)(0x80 |
+ ((c >> 6) & 0x3f));
+ utf_o->u_name[utf_o->u_len++] =
+ (uint8_t)(0x80 | (c & 0x3f));
}
}
utf_o->u_cmpID = 8;
@@ -232,9 +238,8 @@
goto error_out;
}
- if (max_val == 0xffffU) {
+ if (max_val == 0xffffU)
ocu[++u_len] = (uint8_t)(utf_char >> 8);
- }
ocu[++u_len] = (uint8_t)(utf_char & 0xffU);
}
@@ -330,29 +335,29 @@
struct ustr filename, unifilename;
int len;
- if (udf_build_ustr_exact(&unifilename, sname, flen)) {
+ if (udf_build_ustr_exact(&unifilename, sname, flen))
return 0;
- }
if (UDF_QUERY_FLAG(sb, UDF_FLAG_UTF8)) {
if (!udf_CS0toUTF8(&filename, &unifilename)) {
- udf_debug("Failed in udf_get_filename: sname = %s\n", sname);
+ udf_debug("Failed in udf_get_filename: sname = %s\n",
+ sname);
return 0;
}
} else if (UDF_QUERY_FLAG(sb, UDF_FLAG_NLS_MAP)) {
- if (!udf_CS0toNLS(UDF_SB(sb)->s_nls_map, &filename, &unifilename)) {
- udf_debug("Failed in udf_get_filename: sname = %s\n", sname);
+ if (!udf_CS0toNLS(UDF_SB(sb)->s_nls_map, &filename,
+ &unifilename)) {
+ udf_debug("Failed in udf_get_filename: sname = %s\n",
+ sname);
return 0;
}
- } else {
+ } else
return 0;
- }
len = udf_translate_to_linux(dname, filename.u_name, filename.u_len,
unifilename.u_name, unifilename.u_len);
- if (len) {
+ if (len)
return len;
- }
return 0;
}
@@ -363,23 +368,20 @@
struct ustr unifilename;
int namelen;
- if (!(udf_char_to_ustr(&unifilename, sname, flen))) {
+ if (!udf_char_to_ustr(&unifilename, sname, flen))
return 0;
- }
if (UDF_QUERY_FLAG(sb, UDF_FLAG_UTF8)) {
namelen = udf_UTF8toCS0(dname, &unifilename, UDF_NAME_LEN);
- if (!namelen) {
+ if (!namelen)
return 0;
- }
} else if (UDF_QUERY_FLAG(sb, UDF_FLAG_NLS_MAP)) {
- namelen = udf_NLStoCS0(UDF_SB(sb)->s_nls_map, dname, &unifilename, UDF_NAME_LEN);
- if (!namelen) {
+ namelen = udf_NLStoCS0(UDF_SB(sb)->s_nls_map, dname,
+ &unifilename, UDF_NAME_LEN);
+ if (!namelen)
return 0;
- }
- } else {
+ } else
return 0;
- }
return namelen;
}
@@ -389,8 +391,9 @@
#define CRC_MARK '#'
#define EXT_SIZE 5
-static int udf_translate_to_linux(uint8_t *newName, uint8_t *udfName, int udfLen,
- uint8_t *fidName, int fidNameLen)
+static int udf_translate_to_linux(uint8_t *newName, uint8_t *udfName,
+ int udfLen, uint8_t *fidName,
+ int fidNameLen)
{
int index, newIndex = 0, needsCRC = 0;
int extIndex = 0, newExtIndex = 0, hasExt = 0;
@@ -409,13 +412,16 @@
if (curr == '/' || curr == 0) {
needsCRC = 1;
curr = ILLEGAL_CHAR_MARK;
- while (index + 1 < udfLen && (udfName[index + 1] == '/' ||
- udfName[index + 1] == 0))
+ while (index + 1 < udfLen &&
+ (udfName[index + 1] == '/' ||
+ udfName[index + 1] == 0))
index++;
- } if (curr == EXT_MARK && (udfLen - index - 1) <= EXT_SIZE) {
- if (udfLen == index + 1) {
+ }
+ if (curr == EXT_MARK &&
+ (udfLen - index - 1) <= EXT_SIZE) {
+ if (udfLen == index + 1)
hasExt = 0;
- } else {
+ else {
hasExt = 1;
extIndex = index;
newExtIndex = newIndex;
@@ -433,16 +439,18 @@
if (hasExt) {
int maxFilenameLen;
- for(index = 0; index < EXT_SIZE && extIndex + index + 1 < udfLen; index++) {
+ for (index = 0;
+ index < EXT_SIZE && extIndex + index + 1 < udfLen;
+ index++) {
curr = udfName[extIndex + index + 1];
if (curr == '/' || curr == 0) {
needsCRC = 1;
curr = ILLEGAL_CHAR_MARK;
- while(extIndex + index + 2 < udfLen &&
- (index + 1 < EXT_SIZE
- && (udfName[extIndex + index + 2] == '/' ||
- udfName[extIndex + index + 2] == 0)))
+ while (extIndex + index + 2 < udfLen &&
+ (index + 1 < EXT_SIZE &&
+ (udfName[extIndex + index + 2] == '/' ||
+ udfName[extIndex + index + 2] == 0)))
index++;
}
ext[localExtIndex++] = curr;
@@ -452,9 +460,8 @@
newIndex = maxFilenameLen;
else
newIndex = newExtIndex;
- } else if (newIndex > 250) {
+ } else if (newIndex > 250)
newIndex = 250;
- }
newName[newIndex++] = CRC_MARK;
valueCRC = udf_crc(fidName, fidNameLen, 0);
newName[newIndex++] = hexChar[(valueCRC & 0xf000) >> 12];
diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c
index f63a09c..1fca381 100644
--- a/fs/ufs/balloc.c
+++ b/fs/ufs/balloc.c
@@ -9,7 +9,6 @@
*/
#include <linux/fs.h>
-#include <linux/ufs_fs.h>
#include <linux/stat.h>
#include <linux/time.h>
#include <linux/string.h>
@@ -19,6 +18,7 @@
#include <linux/bitops.h>
#include <asm/byteorder.h>
+#include "ufs_fs.h"
#include "ufs.h"
#include "swab.h"
#include "util.h"
diff --git a/fs/ufs/cylinder.c b/fs/ufs/cylinder.c
index 2a81566..b467632 100644
--- a/fs/ufs/cylinder.c
+++ b/fs/ufs/cylinder.c
@@ -9,7 +9,6 @@
*/
#include <linux/fs.h>
-#include <linux/ufs_fs.h>
#include <linux/time.h>
#include <linux/stat.h>
#include <linux/string.h>
@@ -17,6 +16,7 @@
#include <asm/byteorder.h>
+#include "ufs_fs.h"
#include "ufs.h"
#include "swab.h"
#include "util.h"
diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c
index aaf2878..ef563fc 100644
--- a/fs/ufs/dir.c
+++ b/fs/ufs/dir.c
@@ -18,9 +18,9 @@
#include <linux/time.h>
#include <linux/fs.h>
-#include <linux/ufs_fs.h>
#include <linux/swap.h>
+#include "ufs_fs.h"
#include "ufs.h"
#include "swab.h"
#include "util.h"
diff --git a/fs/ufs/file.c b/fs/ufs/file.c
index a46c97b..625ef17 100644
--- a/fs/ufs/file.c
+++ b/fs/ufs/file.c
@@ -24,9 +24,9 @@
*/
#include <linux/fs.h>
-#include <linux/ufs_fs.h>
#include <linux/buffer_head.h> /* for sync_mapping_buffers() */
+#include "ufs_fs.h"
#include "ufs.h"
diff --git a/fs/ufs/ialloc.c b/fs/ufs/ialloc.c
index 7e260bc..ac181f6 100644
--- a/fs/ufs/ialloc.c
+++ b/fs/ufs/ialloc.c
@@ -24,7 +24,6 @@
*/
#include <linux/fs.h>
-#include <linux/ufs_fs.h>
#include <linux/time.h>
#include <linux/stat.h>
#include <linux/string.h>
@@ -34,6 +33,7 @@
#include <linux/bitops.h>
#include <asm/byteorder.h>
+#include "ufs_fs.h"
#include "ufs.h"
#include "swab.h"
#include "util.h"
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index 489f26b..5446b88 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -30,7 +30,6 @@
#include <linux/errno.h>
#include <linux/fs.h>
-#include <linux/ufs_fs.h>
#include <linux/time.h>
#include <linux/stat.h>
#include <linux/string.h>
@@ -38,6 +37,7 @@
#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
+#include "ufs_fs.h"
#include "ufs.h"
#include "swab.h"
#include "util.h"
diff --git a/fs/ufs/namei.c b/fs/ufs/namei.c
index 747a4de..e3a9b1f 100644
--- a/fs/ufs/namei.c
+++ b/fs/ufs/namei.c
@@ -29,8 +29,9 @@
#include <linux/time.h>
#include <linux/fs.h>
-#include <linux/ufs_fs.h>
#include <linux/smp_lock.h>
+
+#include "ufs_fs.h"
#include "ufs.h"
#include "util.h"
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 73deff4..85b22b5 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -76,7 +76,6 @@
#include <linux/errno.h>
#include <linux/fs.h>
-#include <linux/ufs_fs.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/stat.h>
@@ -91,6 +90,7 @@
#include <linux/mount.h>
#include <linux/seq_file.h>
+#include "ufs_fs.h"
#include "ufs.h"
#include "swab.h"
#include "util.h"
@@ -131,6 +131,8 @@
printk(KERN_INFO" cs_nffree(Num of free frags): %llu\n",
(unsigned long long)
fs64_to_cpu(sb, usb3->fs_un1.fs_u2.cs_nffree));
+ printk(KERN_INFO" fs_maxsymlinklen: %u\n",
+ fs32_to_cpu(sb, usb3->fs_un2.fs_44.fs_maxsymlinklen));
} else {
printk(" sblkno: %u\n", fs32_to_cpu(sb, usb1->fs_sblkno));
printk(" cblkno: %u\n", fs32_to_cpu(sb, usb1->fs_cblkno));
@@ -1061,8 +1063,8 @@
uspi->s_bpf = uspi->s_fsize << 3;
uspi->s_bpfshift = uspi->s_fshift + 3;
uspi->s_bpfmask = uspi->s_bpf - 1;
- if ((sbi->s_mount_opt & UFS_MOUNT_UFSTYPE) ==
- UFS_MOUNT_UFSTYPE_44BSD)
+ if ((sbi->s_mount_opt & UFS_MOUNT_UFSTYPE) == UFS_MOUNT_UFSTYPE_44BSD ||
+ (sbi->s_mount_opt & UFS_MOUNT_UFSTYPE) == UFS_MOUNT_UFSTYPE_UFS2)
uspi->s_maxsymlinklen =
fs32_to_cpu(sb, usb3->fs_un2.fs_44.fs_maxsymlinklen);
diff --git a/fs/ufs/symlink.c b/fs/ufs/symlink.c
index 43ac10e..c0156ed 100644
--- a/fs/ufs/symlink.c
+++ b/fs/ufs/symlink.c
@@ -27,7 +27,8 @@
#include <linux/fs.h>
#include <linux/namei.h>
-#include <linux/ufs_fs.h>
+
+#include "ufs_fs.h"
#include "ufs.h"
diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c
index 311ded3..41dd431 100644
--- a/fs/ufs/truncate.c
+++ b/fs/ufs/truncate.c
@@ -36,7 +36,6 @@
#include <linux/errno.h>
#include <linux/fs.h>
-#include <linux/ufs_fs.h>
#include <linux/fcntl.h>
#include <linux/time.h>
#include <linux/stat.h>
@@ -46,6 +45,7 @@
#include <linux/blkdev.h>
#include <linux/sched.h>
+#include "ufs_fs.h"
#include "ufs.h"
#include "swab.h"
#include "util.h"
diff --git a/include/linux/ufs_fs.h b/fs/ufs/ufs_fs.h
similarity index 99%
rename from include/linux/ufs_fs.h
rename to fs/ufs/ufs_fs.h
index 10b854d..54bde18 100644
--- a/include/linux/ufs_fs.h
+++ b/fs/ufs/ufs_fs.h
@@ -35,16 +35,10 @@
#include <linux/stat.h>
#include <linux/fs.h>
-#ifndef __KERNEL__
-typedef __u64 __fs64;
-typedef __u32 __fs32;
-typedef __u16 __fs16;
-#else
#include <asm/div64.h>
typedef __u64 __bitwise __fs64;
typedef __u32 __bitwise __fs32;
typedef __u16 __bitwise __fs16;
-#endif
#define UFS_BBLOCK 0
#define UFS_BBSIZE 8192
@@ -197,7 +191,7 @@
*/
#define UFS_MINFREE 5
#define UFS_DEFAULTOPT UFS_OPTTIME
-
+
/*
* Turn file system block numbers into disk block addresses.
* This maps file system blocks to device size blocks.
@@ -714,7 +708,7 @@
__u32 c_clustersumoff;/* (u_int32) counts of avail clusters */
__u32 c_clusteroff; /* (u_int8) free cluster map */
__u32 c_nclusterblks; /* number of clusters this cg */
-};
+};
struct ufs_sb_private_info {
diff --git a/fs/ufs/util.c b/fs/ufs/util.c
index 410084d..85a7fc9 100644
--- a/fs/ufs/util.c
+++ b/fs/ufs/util.c
@@ -8,9 +8,9 @@
#include <linux/string.h>
#include <linux/slab.h>
-#include <linux/ufs_fs.h>
#include <linux/buffer_head.h>
+#include "ufs_fs.h"
#include "ufs.h"
#include "swab.h"
#include "util.h"
diff --git a/include/asm-alpha/a.out-core.h b/include/asm-alpha/a.out-core.h
new file mode 100644
index 0000000..9e33e92
--- /dev/null
+++ b/include/asm-alpha/a.out-core.h
@@ -0,0 +1,80 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+
+/*
+ * Fill in the user structure for an ECOFF core dump.
+ */
+static inline void aout_dump_thread(struct pt_regs *pt, struct user *dump)
+{
+ /* switch stack follows right below pt_regs: */
+ struct switch_stack * sw = ((struct switch_stack *) pt) - 1;
+
+ dump->magic = CMAGIC;
+ dump->start_code = current->mm->start_code;
+ dump->start_data = current->mm->start_data;
+ dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
+ dump->u_tsize = ((current->mm->end_code - dump->start_code)
+ >> PAGE_SHIFT);
+ dump->u_dsize = ((current->mm->brk + PAGE_SIZE-1 - dump->start_data)
+ >> PAGE_SHIFT);
+ dump->u_ssize = (current->mm->start_stack - dump->start_stack
+ + PAGE_SIZE-1) >> PAGE_SHIFT;
+
+ /*
+ * We store the registers in an order/format that is
+ * compatible with DEC Unix/OSF/1 as this makes life easier
+ * for gdb.
+ */
+ dump->regs[EF_V0] = pt->r0;
+ dump->regs[EF_T0] = pt->r1;
+ dump->regs[EF_T1] = pt->r2;
+ dump->regs[EF_T2] = pt->r3;
+ dump->regs[EF_T3] = pt->r4;
+ dump->regs[EF_T4] = pt->r5;
+ dump->regs[EF_T5] = pt->r6;
+ dump->regs[EF_T6] = pt->r7;
+ dump->regs[EF_T7] = pt->r8;
+ dump->regs[EF_S0] = sw->r9;
+ dump->regs[EF_S1] = sw->r10;
+ dump->regs[EF_S2] = sw->r11;
+ dump->regs[EF_S3] = sw->r12;
+ dump->regs[EF_S4] = sw->r13;
+ dump->regs[EF_S5] = sw->r14;
+ dump->regs[EF_S6] = sw->r15;
+ dump->regs[EF_A3] = pt->r19;
+ dump->regs[EF_A4] = pt->r20;
+ dump->regs[EF_A5] = pt->r21;
+ dump->regs[EF_T8] = pt->r22;
+ dump->regs[EF_T9] = pt->r23;
+ dump->regs[EF_T10] = pt->r24;
+ dump->regs[EF_T11] = pt->r25;
+ dump->regs[EF_RA] = pt->r26;
+ dump->regs[EF_T12] = pt->r27;
+ dump->regs[EF_AT] = pt->r28;
+ dump->regs[EF_SP] = rdusp();
+ dump->regs[EF_PS] = pt->ps;
+ dump->regs[EF_PC] = pt->pc;
+ dump->regs[EF_GP] = pt->gp;
+ dump->regs[EF_A0] = pt->r16;
+ dump->regs[EF_A1] = pt->r17;
+ dump->regs[EF_A2] = pt->r18;
+ memcpy((char *)dump->regs + EF_SIZE, sw->fp, 32 * 8);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
diff --git a/include/asm-alpha/a.out.h b/include/asm-alpha/a.out.h
index e43cf61..02ce847 100644
--- a/include/asm-alpha/a.out.h
+++ b/include/asm-alpha/a.out.h
@@ -98,11 +98,5 @@
set_personality (((BFPM->sh_bang || EX.ah.entry < 0x100000000L \
? ADDR_LIMIT_32BIT : 0) | PER_OSF4))
-#define STACK_TOP \
- (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
-
-#define STACK_TOP_MAX 0x00120000000UL
-
-#endif
-
+#endif /* __KERNEL__ */
#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-alpha/page.h b/include/asm-alpha/page.h
index 05f09f9..22ff976 100644
--- a/include/asm-alpha/page.h
+++ b/include/asm-alpha/page.h
@@ -62,6 +62,8 @@
#endif /* STRICT_MM_TYPECHECKS */
+typedef struct page *pgtable_t;
+
#ifdef USE_48_BIT_KSEG
#define PAGE_OFFSET 0xffff800000000000UL
#else
diff --git a/include/asm-alpha/param.h b/include/asm-alpha/param.h
index 214e799..0982f1d 100644
--- a/include/asm-alpha/param.h
+++ b/include/asm-alpha/param.h
@@ -5,15 +5,7 @@
hardware ignores reprogramming. We also need userland buy-in to the
change in HZ, since this is visible in the wait4 resources etc. */
-
-#ifndef HZ
-# ifndef CONFIG_ALPHA_RAWHIDE
-# define HZ 1024
-# else
-# define HZ 1200
-# endif
-#endif
-
+#define HZ CONFIG_HZ
#define USER_HZ HZ
#define EXEC_PAGESIZE 8192
diff --git a/include/asm-alpha/pgalloc.h b/include/asm-alpha/pgalloc.h
index fdbedac..fd09015 100644
--- a/include/asm-alpha/pgalloc.h
+++ b/include/asm-alpha/pgalloc.h
@@ -11,10 +11,11 @@
*/
static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
+pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte)
{
pmd_set(pmd, (pte_t *)(page_to_pa(pte) + PAGE_OFFSET));
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
static inline void
pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
@@ -57,18 +58,23 @@
free_page((unsigned long)pte);
}
-static inline struct page *
-pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+static inline pgtable_t
+pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
- pte_t *pte = pte_alloc_one_kernel(mm, addr);
- if (pte)
- return virt_to_page(pte);
- return NULL;
+ pte_t *pte = pte_alloc_one_kernel(mm, address);
+ struct page *page;
+
+ if (!pte)
+ return NULL;
+ page = virt_to_page(pte);
+ pgtable_page_ctor(page);
+ return page;
}
static inline void
-pte_free(struct mm_struct *mm, struct page *page)
+pte_free(struct mm_struct *mm, pgtable_t page)
{
+ pgtable_page_dtor(page);
__free_page(page);
}
diff --git a/include/asm-alpha/processor.h b/include/asm-alpha/processor.h
index 425b7b6..94afe58 100644
--- a/include/asm-alpha/processor.h
+++ b/include/asm-alpha/processor.h
@@ -20,6 +20,11 @@
*/
#define TASK_SIZE (0x40000000000UL)
+#define STACK_TOP \
+ (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+
+#define STACK_TOP_MAX 0x00120000000UL
+
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
diff --git a/include/asm-arm/a.out-core.h b/include/asm-arm/a.out-core.h
new file mode 100644
index 0000000..93d04ac
--- /dev/null
+++ b/include/asm-arm/a.out-core.h
@@ -0,0 +1,49 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+#include <linux/elfcore.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+ struct task_struct *tsk = current;
+
+ dump->magic = CMAGIC;
+ dump->start_code = tsk->mm->start_code;
+ dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
+
+ dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
+ dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ dump->u_ssize = 0;
+
+ dump->u_debugreg[0] = tsk->thread.debug.bp[0].address;
+ dump->u_debugreg[1] = tsk->thread.debug.bp[1].address;
+ dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm;
+ dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm;
+ dump->u_debugreg[4] = tsk->thread.debug.nsaved;
+
+ if (dump->start_stack < 0x04000000)
+ dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
+
+ dump->regs = *regs;
+ dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
diff --git a/include/asm-arm/a.out.h b/include/asm-arm/a.out.h
index d7165e8..79489fd 100644
--- a/include/asm-arm/a.out.h
+++ b/include/asm-arm/a.out.h
@@ -27,12 +27,6 @@
#define M_ARM 103
-#ifdef __KERNEL__
-#define STACK_TOP ((current->personality == PER_LINUX_32BIT) ? \
- TASK_SIZE : TASK_SIZE_26)
-#define STACK_TOP_MAX TASK_SIZE
-#endif
-
#ifndef LIBRARY_START_TEXT
#define LIBRARY_START_TEXT (0x00c00000)
#endif
diff --git a/include/asm-arm/mutex.h b/include/asm-arm/mutex.h
index cb29d84..020bd98 100644
--- a/include/asm-arm/mutex.h
+++ b/include/asm-arm/mutex.h
@@ -24,7 +24,7 @@
* reattempted until it succeeds.
*/
static inline void
-__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
{
int __ex_flag, __res;
@@ -44,7 +44,7 @@
}
static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
{
int __ex_flag, __res;
@@ -70,7 +70,7 @@
* better generated assembly.
*/
static inline void
-__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
{
int __ex_flag, __res, __orig;
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 31ff12f4f..c86f68e 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -171,6 +171,8 @@
#endif /* STRICT_MM_TYPECHECKS */
+typedef struct page *pgtable_t;
+
#endif /* CONFIG_MMU */
#include <asm/memory.h>
diff --git a/include/asm-arm/pgalloc.h b/include/asm-arm/pgalloc.h
index fb6c6e3..163b030 100644
--- a/include/asm-arm/pgalloc.h
+++ b/include/asm-arm/pgalloc.h
@@ -66,7 +66,7 @@
return pte;
}
-static inline struct page *
+static inline pgtable_t
pte_alloc_one(struct mm_struct *mm, unsigned long addr)
{
struct page *pte;
@@ -75,6 +75,7 @@
if (pte) {
void *page = page_address(pte);
clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+ pgtable_page_ctor(pte);
}
return pte;
@@ -91,8 +92,9 @@
}
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
__free_page(pte);
}
@@ -123,10 +125,11 @@
}
static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmdp, struct page *ptep)
+pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
{
__pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
#endif /* CONFIG_MMU */
diff --git a/include/asm-arm/posix_types.h b/include/asm-arm/posix_types.h
index e142a2a..c37379d 100644
--- a/include/asm-arm/posix_types.h
+++ b/include/asm-arm/posix_types.h
@@ -51,14 +51,10 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
#define __FD_SET(fd, fdsetp) \
diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h
index 1bbf1618..bd8029e 100644
--- a/include/asm-arm/processor.h
+++ b/include/asm-arm/processor.h
@@ -22,6 +22,12 @@
#include <asm/ptrace.h>
#include <asm/types.h>
+#ifdef __KERNEL__
+#define STACK_TOP ((current->personality == PER_LINUX_32BIT) ? \
+ TASK_SIZE : TASK_SIZE_26)
+#define STACK_TOP_MAX TASK_SIZE
+#endif
+
union debug_insn {
u32 arm;
u16 thumb;
diff --git a/include/asm-avr32/a.out.h b/include/asm-avr32/a.out.h
index 9f398ab..e46375a3 100644
--- a/include/asm-avr32/a.out.h
+++ b/include/asm-avr32/a.out.h
@@ -17,11 +17,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-#endif
-
#endif /* __ASM_AVR32_A_OUT_H */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index d6993a6..7597b0b 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -51,6 +51,9 @@
at32_add_device_ide(unsigned int id, unsigned int extint,
struct ide_platform_data *data);
+/* mask says which PWM channels to mux */
+struct platform_device *at32_add_device_pwm(u32 mask);
+
/* depending on what's hooked up, not all SSC pins will be used */
#define ATMEL_SSC_TK 0x01
#define ATMEL_SSC_TF 0x02
diff --git a/include/asm-avr32/page.h b/include/asm-avr32/page.h
index ee23499..5582968 100644
--- a/include/asm-avr32/page.h
+++ b/include/asm-avr32/page.h
@@ -34,6 +34,7 @@
typedef struct { unsigned long pte; } pte_t;
typedef struct { unsigned long pgd; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
#define pte_val(x) ((x).pte)
#define pgd_val(x) ((x).pgd)
diff --git a/include/asm-avr32/pgalloc.h b/include/asm-avr32/pgalloc.h
index b77e364..51fc1f6 100644
--- a/include/asm-avr32/pgalloc.h
+++ b/include/asm-avr32/pgalloc.h
@@ -17,10 +17,11 @@
set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
- struct page *pte)
+ pgtable_t pte)
{
set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
/*
* Allocate and free page tables
@@ -51,7 +52,9 @@
struct page *pte;
pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
-
+ if (!pte)
+ return NULL;
+ pgtable_page_ctor(pte);
return pte;
}
@@ -60,12 +63,17 @@
free_page((unsigned long)pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
__free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb), pte); \
+} while (0)
#define check_pgt_cache() do { } while(0)
diff --git a/include/asm-avr32/posix_types.h b/include/asm-avr32/posix_types.h
index 9e255b9..fe0c0c0 100644
--- a/include/asm-avr32/posix_types.h
+++ b/include/asm-avr32/posix_types.h
@@ -46,11 +46,7 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
#if defined(__KERNEL__)
diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h
index 4212551..49a88f5 100644
--- a/include/asm-avr32/processor.h
+++ b/include/asm-avr32/processor.h
@@ -13,6 +13,11 @@
#define TASK_SIZE 0x80000000
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+#endif
+
#ifndef __ASSEMBLY__
static inline void *current_text_addr(void)
diff --git a/include/asm-blackfin/a.out.h b/include/asm-blackfin/a.out.h
index d37a684..6c3d652 100644
--- a/include/asm-blackfin/a.out.h
+++ b/include/asm-blackfin/a.out.h
@@ -16,10 +16,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-
-#define STACK_TOP TASK_SIZE
-
-#endif
-
#endif /* __BFIN_A_OUT_H__ */
diff --git a/include/asm-blackfin/posix_types.h b/include/asm-blackfin/posix_types.h
index c3fa50f..23aa1f8 100644
--- a/include/asm-blackfin/posix_types.h
+++ b/include/asm-blackfin/posix_types.h
@@ -39,14 +39,10 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
@@ -60,6 +56,6 @@
#undef __FD_ZERO
#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif
diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h
index c571e95..1033e5c 100644
--- a/include/asm-blackfin/processor.h
+++ b/include/asm-blackfin/processor.h
@@ -30,6 +30,10 @@
extern unsigned long memory_end;
#define TASK_SIZE (memory_end)
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#endif
+
#define TASK_UNMAPPED_BASE 0
struct thread_struct {
diff --git a/include/asm-cris/a.out.h b/include/asm-cris/a.out.h
index 919b34a..c82e9f9 100644
--- a/include/asm-cris/a.out.h
+++ b/include/asm-cris/a.out.h
@@ -6,11 +6,6 @@
* wants to know about a.out even if there is no interpreter available...
*/
-/* grabbed from the intel stuff */
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-
struct exec
{
unsigned long a_info; /* Use macros N_MAGIC, etc for access */
@@ -28,5 +23,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-
#endif
diff --git a/include/asm-cris/page.h b/include/asm-cris/page.h
index 3b0156c..c45bb1e 100644
--- a/include/asm-cris/page.h
+++ b/include/asm-cris/page.h
@@ -26,6 +26,7 @@
typedef struct { unsigned long pte; } pte_t;
typedef struct { unsigned long pgd; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
#endif
#define pte_val(x) ((x).pte)
diff --git a/include/asm-cris/param.h b/include/asm-cris/param.h
index b249726..0e47994 100644
--- a/include/asm-cris/param.h
+++ b/include/asm-cris/param.h
@@ -3,7 +3,7 @@
/* Currently we assume that HZ=100 is good for CRIS. */
#ifdef __KERNEL__
-# define HZ 100 /* Internal kernel timer frequency */
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
diff --git a/include/asm-cris/pgalloc.h b/include/asm-cris/pgalloc.h
index 8ddd66f..a1ba761 100644
--- a/include/asm-cris/pgalloc.h
+++ b/include/asm-cris/pgalloc.h
@@ -6,6 +6,7 @@
#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, pte)
#define pmd_populate(mm, pmd, pte) pmd_set(pmd, page_address(pte))
+#define pmd_pgtable(pmd) pmd_page(pmd)
/*
* Allocate and free page tables.
@@ -27,10 +28,11 @@
return pte;
}
-static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *pte;
pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+ pgtable_page_ctor(pte);
return pte;
}
@@ -39,13 +41,17 @@
free_page((unsigned long)pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
__free_page(pte);
}
-
-#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb), pte); \
+} while (0)
#define check_pgt_cache() do { } while (0)
diff --git a/include/asm-cris/posix_types.h b/include/asm-cris/posix_types.h
index 3a5e4c4..ce3fb25 100644
--- a/include/asm-cris/posix_types.h
+++ b/include/asm-cris/posix_types.h
@@ -44,11 +44,7 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
#ifdef __KERNEL__
diff --git a/include/asm-cris/processor.h b/include/asm-cris/processor.h
index 568da1d..cdc0c1d 100644
--- a/include/asm-cris/processor.h
+++ b/include/asm-cris/processor.h
@@ -17,6 +17,9 @@
struct task_struct;
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
diff --git a/include/asm-frv/a.out.h b/include/asm-frv/a.out.h
deleted file mode 100644
index dd3b7e5..0000000
--- a/include/asm-frv/a.out.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * FRV doesn't do AOUT format. This header file should be removed as
- * soon as fs/exec.c and fs/proc/kcore.c and the archs that require
- * them to include linux/a.out.h are fixed.
- */
diff --git a/include/asm-frv/page.h b/include/asm-frv/page.h
index cacc045..c2c1e89 100644
--- a/include/asm-frv/page.h
+++ b/include/asm-frv/page.h
@@ -25,6 +25,7 @@
typedef struct { pmd_t pue[1]; } pud_t;
typedef struct { pud_t pge[1]; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
#define pte_val(x) ((x).pte)
#define pmd_val(x) ((x).ste[0])
diff --git a/include/asm-frv/param.h b/include/asm-frv/param.h
index 365653b..6859dd5 100644
--- a/include/asm-frv/param.h
+++ b/include/asm-frv/param.h
@@ -2,7 +2,7 @@
#define _ASM_PARAM_H
#ifdef __KERNEL__
-#define HZ 1000 /* Internal kernel timer frequency */
+#define HZ CONFIG_HZ /* Internal kernel timer frequency */
#define USER_HZ 100 /* .. some user interfaces are in "ticks" */
#define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
diff --git a/include/asm-frv/pgalloc.h b/include/asm-frv/pgalloc.h
index e89620e..971e6ad 100644
--- a/include/asm-frv/pgalloc.h
+++ b/include/asm-frv/pgalloc.h
@@ -25,6 +25,7 @@
do { \
__set_pmd((PMD), page_to_pfn(PAGE) << PAGE_SHIFT | _PAGE_TABLE); \
} while(0)
+#define pmd_pgtable(pmd) pmd_page(pmd)
/*
* Allocate and free page tables.
@@ -35,19 +36,24 @@
extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
-extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
{
free_page((unsigned long)pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
__free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb),(pte)); \
+} while (0)
/*
* allocating and freeing a pmd is trivial: the 1-entry pmd is
diff --git a/include/asm-frv/posix_types.h b/include/asm-frv/posix_types.h
index 73c2ba8..a9f1f5b 100644
--- a/include/asm-frv/posix_types.h
+++ b/include/asm-frv/posix_types.h
@@ -39,14 +39,10 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
@@ -60,7 +56,7 @@
#undef __FD_ZERO
#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 57ba606..fd9dcfd 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,4 +1,6 @@
+ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h)
unifdef-y += a.out.h
+endif
unifdef-y += auxvec.h
unifdef-y += byteorder.h
unifdef-y += errno.h
diff --git a/include/asm-generic/iomap.h b/include/asm-generic/iomap.h
index cde592f..67dc84c 100644
--- a/include/asm-generic/iomap.h
+++ b/include/asm-generic/iomap.h
@@ -25,17 +25,17 @@
* in the low address range. Architectures for which this is not
* true can't use this generic implementation.
*/
-extern unsigned int fastcall ioread8(void __iomem *);
-extern unsigned int fastcall ioread16(void __iomem *);
-extern unsigned int fastcall ioread16be(void __iomem *);
-extern unsigned int fastcall ioread32(void __iomem *);
-extern unsigned int fastcall ioread32be(void __iomem *);
+extern unsigned int ioread8(void __iomem *);
+extern unsigned int ioread16(void __iomem *);
+extern unsigned int ioread16be(void __iomem *);
+extern unsigned int ioread32(void __iomem *);
+extern unsigned int ioread32be(void __iomem *);
-extern void fastcall iowrite8(u8, void __iomem *);
-extern void fastcall iowrite16(u16, void __iomem *);
-extern void fastcall iowrite16be(u16, void __iomem *);
-extern void fastcall iowrite32(u32, void __iomem *);
-extern void fastcall iowrite32be(u32, void __iomem *);
+extern void iowrite8(u8, void __iomem *);
+extern void iowrite16(u16, void __iomem *);
+extern void iowrite16be(u16, void __iomem *);
+extern void iowrite32(u32, void __iomem *);
+extern void iowrite32be(u32, void __iomem *);
/*
* "string" versions of the above. Note that they
@@ -48,13 +48,13 @@
* memory across multiple ports, use "memcpy_toio()"
* and friends.
*/
-extern void fastcall ioread8_rep(void __iomem *port, void *buf, unsigned long count);
-extern void fastcall ioread16_rep(void __iomem *port, void *buf, unsigned long count);
-extern void fastcall ioread32_rep(void __iomem *port, void *buf, unsigned long count);
+extern void ioread8_rep(void __iomem *port, void *buf, unsigned long count);
+extern void ioread16_rep(void __iomem *port, void *buf, unsigned long count);
+extern void ioread32_rep(void __iomem *port, void *buf, unsigned long count);
-extern void fastcall iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
-extern void fastcall iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
-extern void fastcall iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
/* Create a virtual mapping cookie for an IO port range */
extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
diff --git a/include/asm-generic/mutex-dec.h b/include/asm-generic/mutex-dec.h
index 0134151..ed108be 100644
--- a/include/asm-generic/mutex-dec.h
+++ b/include/asm-generic/mutex-dec.h
@@ -18,7 +18,7 @@
* 1 even when the "1" assertion wasn't true.
*/
static inline void
-__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
{
if (unlikely(atomic_dec_return(count) < 0))
fail_fn(count);
@@ -37,7 +37,7 @@
* or anything the slow path function returns.
*/
static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
{
if (unlikely(atomic_dec_return(count) < 0))
return fail_fn(count);
@@ -61,7 +61,7 @@
* to return 0 otherwise.
*/
static inline void
-__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
{
smp_mb();
if (unlikely(atomic_inc_return(count) <= 0))
diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h
index 6a7e8c1..7b9cd2c 100644
--- a/include/asm-generic/mutex-xchg.h
+++ b/include/asm-generic/mutex-xchg.h
@@ -23,7 +23,7 @@
* even when the "1" assertion wasn't true.
*/
static inline void
-__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
{
if (unlikely(atomic_xchg(count, 0) != 1))
fail_fn(count);
@@ -42,7 +42,7 @@
* or anything the slow path function returns
*/
static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *))
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
{
if (unlikely(atomic_xchg(count, 0) != 1))
return fail_fn(count);
@@ -65,7 +65,7 @@
* to return 0 otherwise.
*/
static inline void
-__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *))
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
{
smp_mb();
if (unlikely(atomic_xchg(count, 1) != 0))
diff --git a/include/asm-generic/termios.h b/include/asm-generic/termios.h
index 33dca30..7d39ecc 100644
--- a/include/asm-generic/termios.h
+++ b/include/asm-generic/termios.h
@@ -61,8 +61,14 @@
return 0;
}
+#ifndef user_termios_to_kernel_termios
#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#endif
+
+#ifndef kernel_termios_to_user_termios
#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#endif
+
#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
diff --git a/include/asm-h8300/a.out.h b/include/asm-h8300/a.out.h
index aa5d227..ded780f 100644
--- a/include/asm-h8300/a.out.h
+++ b/include/asm-h8300/a.out.h
@@ -17,11 +17,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-#endif
-
#endif /* __H8300_A_OUT_H__ */
diff --git a/include/asm-h8300/param.h b/include/asm-h8300/param.h
index c25806e..04f64f1 100644
--- a/include/asm-h8300/param.h
+++ b/include/asm-h8300/param.h
@@ -3,7 +3,7 @@
#ifndef HZ
-#define HZ 100
+#define HZ CONFIG_HZ
#endif
#ifdef __KERNEL__
diff --git a/include/asm-h8300/posix_types.h b/include/asm-h8300/posix_types.h
index 7de94b1..5c55392 100644
--- a/include/asm-h8300/posix_types.h
+++ b/include/asm-h8300/posix_types.h
@@ -38,14 +38,10 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
@@ -59,6 +55,6 @@
#undef __FD_ZERO
#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif
diff --git a/include/asm-h8300/processor.h b/include/asm-h8300/processor.h
index 49fc886..69e8a34 100644
--- a/include/asm-h8300/processor.h
+++ b/include/asm-h8300/processor.h
@@ -39,6 +39,11 @@
*/
#define TASK_SIZE (0xFFFFFFFFUL)
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+#endif
+
/*
* This decides where the kernel will search for a free chunk of vm
* space during mmap's. We won't be using it
diff --git a/include/asm-ia64/a.out.h b/include/asm-ia64/a.out.h
index 7293ac1..193dcfb 100644
--- a/include/asm-ia64/a.out.h
+++ b/include/asm-ia64/a.out.h
@@ -29,7 +29,4 @@
#define N_SYMSIZE(x) 0
#define N_TXTOFF(x) 0
-#ifdef __KERNEL__
-#include <asm/ustack.h>
-#endif
#endif /* _ASM_IA64_A_OUT_H */
diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h
index 8a8aa3fd..4999a6c 100644
--- a/include/asm-ia64/page.h
+++ b/include/asm-ia64/page.h
@@ -185,6 +185,7 @@
#endif
typedef struct { unsigned long pgd; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t;
+ typedef struct page *pgtable_t;
# define pte_val(x) ((x).pte)
# define pmd_val(x) ((x).pmd)
@@ -206,6 +207,7 @@
typedef unsigned long pmd_t;
typedef unsigned long pgd_t;
typedef unsigned long pgprot_t;
+ typedef struct page *pgtable_t;
# endif
# define pte_val(x) (x)
diff --git a/include/asm-ia64/pgalloc.h b/include/asm-ia64/pgalloc.h
index 556d988..b9ac1a6 100644
--- a/include/asm-ia64/pgalloc.h
+++ b/include/asm-ia64/pgalloc.h
@@ -70,10 +70,11 @@
#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
static inline void
-pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, struct page *pte)
+pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
{
pmd_val(*pmd_entry) = page_to_phys(pte);
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
static inline void
pmd_populate_kernel(struct mm_struct *mm, pmd_t * pmd_entry, pte_t * pte)
@@ -81,11 +82,17 @@
pmd_val(*pmd_entry) = __pa(pte);
}
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
- unsigned long addr)
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr)
{
- void *pg = quicklist_alloc(0, GFP_KERNEL, NULL);
- return pg ? virt_to_page(pg) : NULL;
+ struct page *page;
+ void *pg;
+
+ pg = quicklist_alloc(0, GFP_KERNEL, NULL);
+ if (!pg)
+ return NULL;
+ page = virt_to_page(pg);
+ pgtable_page_ctor(page);
+ return page;
}
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
@@ -94,8 +101,9 @@
return quicklist_alloc(0, GFP_KERNEL, NULL);
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
quicklist_free_page(0, NULL, pte);
}
diff --git a/include/asm-m32r/a.out.h b/include/asm-m32r/a.out.h
index 6a1b5d4..ab150f5 100644
--- a/include/asm-m32r/a.out.h
+++ b/include/asm-m32r/a.out.h
@@ -17,11 +17,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-#endif
-
#endif /* _ASM_M32R_A_OUT_H */
diff --git a/include/asm-m32r/page.h b/include/asm-m32r/page.h
index 05d43bb..8a677f3 100644
--- a/include/asm-m32r/page.h
+++ b/include/asm-m32r/page.h
@@ -28,6 +28,7 @@
#define PTE_MASK PAGE_MASK
typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
#define pmd_val(x) ((x).pmd)
#define pgd_val(x) ((x).pgd)
diff --git a/include/asm-m32r/param.h b/include/asm-m32r/param.h
index 3e14026..94c7701 100644
--- a/include/asm-m32r/param.h
+++ b/include/asm-m32r/param.h
@@ -2,7 +2,7 @@
#define _ASM_M32R_PARAM_H
#ifdef __KERNEL__
-# define HZ 100 /* Internal kernel timer frequency */
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
diff --git a/include/asm-m32r/pgalloc.h b/include/asm-m32r/pgalloc.h
index e5921ad..f11a2b9 100644
--- a/include/asm-m32r/pgalloc.h
+++ b/include/asm-m32r/pgalloc.h
@@ -9,10 +9,11 @@
set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
- struct page *pte)
+ pgtable_t pte)
{
set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
/*
* Allocate and free page tables.
@@ -37,12 +38,12 @@
return pte;
}
-static __inline__ struct page *pte_alloc_one(struct mm_struct *mm,
+static __inline__ pgtable_t pte_alloc_one(struct mm_struct *mm,
unsigned long address)
{
struct page *pte = alloc_page(GFP_KERNEL|__GFP_ZERO);
-
+ pgtable_page_ctor(pte);
return pte;
}
@@ -51,8 +52,9 @@
free_page((unsigned long)pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
__free_page(pte);
}
diff --git a/include/asm-m32r/posix_types.h b/include/asm-m32r/posix_types.h
index 1caac65..b309c58 100644
--- a/include/asm-m32r/posix_types.h
+++ b/include/asm-m32r/posix_types.h
@@ -39,14 +39,10 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
@@ -117,6 +113,6 @@
}
}
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif /* _ASM_M32R_POSIX_TYPES_H */
diff --git a/include/asm-m32r/processor.h b/include/asm-m32r/processor.h
index 32755bf..1a997fc 100644
--- a/include/asm-m32r/processor.h
+++ b/include/asm-m32r/processor.h
@@ -60,6 +60,11 @@
#define TASK_SIZE (0x00400000UL)
#endif
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+#endif
+
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
diff --git a/include/asm-m68k/a.out-core.h b/include/asm-m68k/a.out-core.h
new file mode 100644
index 0000000..f6bfc1d
--- /dev/null
+++ b/include/asm-m68k/a.out-core.h
@@ -0,0 +1,67 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+#include <linux/elfcore.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+ struct switch_stack *sw;
+
+/* changed the size calculations - should hopefully work better. lbt */
+ dump->magic = CMAGIC;
+ dump->start_code = 0;
+ dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
+ dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
+ dump->u_dsize = ((unsigned long) (current->mm->brk +
+ (PAGE_SIZE-1))) >> PAGE_SHIFT;
+ dump->u_dsize -= dump->u_tsize;
+ dump->u_ssize = 0;
+
+ if (dump->start_stack < TASK_SIZE)
+ dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
+
+ dump->u_ar0 = offsetof(struct user, regs);
+ sw = ((struct switch_stack *)regs) - 1;
+ dump->regs.d1 = regs->d1;
+ dump->regs.d2 = regs->d2;
+ dump->regs.d3 = regs->d3;
+ dump->regs.d4 = regs->d4;
+ dump->regs.d5 = regs->d5;
+ dump->regs.d6 = sw->d6;
+ dump->regs.d7 = sw->d7;
+ dump->regs.a0 = regs->a0;
+ dump->regs.a1 = regs->a1;
+ dump->regs.a2 = regs->a2;
+ dump->regs.a3 = sw->a3;
+ dump->regs.a4 = sw->a4;
+ dump->regs.a5 = sw->a5;
+ dump->regs.a6 = sw->a6;
+ dump->regs.d0 = regs->d0;
+ dump->regs.orig_d0 = regs->orig_d0;
+ dump->regs.stkadj = regs->stkadj;
+ dump->regs.sr = regs->sr;
+ dump->regs.pc = regs->pc;
+ dump->regs.fmtvec = (regs->format << 12) | regs->vector;
+ /* dump floating point stuff */
+ dump->u_fpvalid = dump_fpu (regs, &dump->m68kfp);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
diff --git a/include/asm-m68k/a.out.h b/include/asm-m68k/a.out.h
index 6fc86a2..3885fe4 100644
--- a/include/asm-m68k/a.out.h
+++ b/include/asm-m68k/a.out.h
@@ -17,11 +17,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-#endif
-
#endif /* __M68K_A_OUT_H__ */
diff --git a/include/asm-m68k/motorola_pgalloc.h b/include/asm-m68k/motorola_pgalloc.h
index 500ec9b..d08bf62 100644
--- a/include/asm-m68k/motorola_pgalloc.h
+++ b/include/asm-m68k/motorola_pgalloc.h
@@ -7,7 +7,6 @@
extern pmd_t *get_pointer_table(void);
extern int free_pointer_table(pmd_t *);
-
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
{
pte_t *pte;
@@ -28,7 +27,7 @@
free_page((unsigned long) pte);
}
-static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
pte_t *pte;
@@ -43,19 +42,21 @@
nocache_page(pte);
}
kunmap(pte);
-
+ pgtable_page_ctor(page);
return page;
}
-static inline void pte_free(struct mm_struct *mm, struct page *page)
+static inline void pte_free(struct mm_struct *mm, pgtable_t page)
{
+ pgtable_page_dtor(page);
cache_page(kmap(page));
kunmap(page);
__free_page(page);
}
-static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *page)
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
{
+ pgtable_page_dtor(page);
cache_page(kmap(page));
kunmap(page);
__free_page(page);
@@ -94,10 +95,11 @@
pmd_set(pmd, pte);
}
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *page)
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
{
pmd_set(pmd, page_address(page));
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
{
diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h
index 3f29e2a..880c2cb 100644
--- a/include/asm-m68k/page.h
+++ b/include/asm-m68k/page.h
@@ -91,6 +91,7 @@
typedef struct { unsigned long pmd[16]; } pmd_t;
typedef struct { unsigned long pgd; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
#define pte_val(x) ((x).pte)
#define pmd_val(x) ((&x)->pmd[0])
diff --git a/include/asm-m68k/param.h b/include/asm-m68k/param.h
index 60f409d..536a278 100644
--- a/include/asm-m68k/param.h
+++ b/include/asm-m68k/param.h
@@ -2,7 +2,7 @@
#define _M68K_PARAM_H
#ifdef __KERNEL__
-# define HZ 100 /* Internal kernel timer frequency */
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
diff --git a/include/asm-m68k/posix_types.h b/include/asm-m68k/posix_types.h
index fa166ee..63cdcc1 100644
--- a/include/asm-m68k/posix_types.h
+++ b/include/asm-m68k/posix_types.h
@@ -39,14 +39,10 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
@@ -60,6 +56,6 @@
#undef __FD_ZERO
#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif
diff --git a/include/asm-m68k/processor.h b/include/asm-m68k/processor.h
index 4453ec3..1f61ef5 100644
--- a/include/asm-m68k/processor.h
+++ b/include/asm-m68k/processor.h
@@ -41,6 +41,11 @@
#define TASK_SIZE (0x0E000000UL)
#endif
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+#endif
+
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
diff --git a/include/asm-m68k/sun3_pgalloc.h b/include/asm-m68k/sun3_pgalloc.h
index a5a91e7..d4c83f1 100644
--- a/include/asm-m68k/sun3_pgalloc.h
+++ b/include/asm-m68k/sun3_pgalloc.h
@@ -26,12 +26,17 @@
free_page((unsigned long) pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *page)
+static inline void pte_free(struct mm_struct *mm, pgtable_t page)
{
+ pgtable_page_dtor(page);
__free_page(page);
}
-#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb), pte); \
+} while (0)
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long address)
@@ -45,8 +50,8 @@
return (pte_t *) (page);
}
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
- unsigned long address)
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
{
struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
@@ -54,6 +59,7 @@
return NULL;
clear_highpage(page);
+ pgtable_page_ctor(page);
return page;
}
@@ -63,10 +69,11 @@
pmd_val(*pmd) = __pa((unsigned long)pte);
}
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *page)
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
{
pmd_val(*pmd) = __pa((unsigned long)page_address(page));
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
/*
* allocating and freeing a pmd is trivial: the 1-entry pmd is
diff --git a/include/asm-m68knommu/param.h b/include/asm-m68knommu/param.h
index 4c9904d..96c4510 100644
--- a/include/asm-m68knommu/param.h
+++ b/include/asm-m68knommu/param.h
@@ -1,13 +1,7 @@
#ifndef _M68KNOMMU_PARAM_H
#define _M68KNOMMU_PARAM_H
-
-#if defined(CONFIG_CLEOPATRA)
-#define HZ 1000
-#endif
-#ifndef HZ
-#define HZ 100
-#endif
+#define HZ CONFIG_HZ
#ifdef __KERNEL__
#define USER_HZ HZ
diff --git a/include/asm-mips/a.out.h b/include/asm-mips/a.out.h
index bf55a5b..cad8371 100644
--- a/include/asm-mips/a.out.h
+++ b/include/asm-mips/a.out.h
@@ -32,17 +32,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-
-#ifdef CONFIG_32BIT
-#define STACK_TOP TASK_SIZE
-#endif
-#ifdef CONFIG_64BIT
-#define STACK_TOP \
- (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
-#endif
-#define STACK_TOP_MAX TASK_SIZE
-
-#endif
-
#endif /* _ASM_A_OUT_H */
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index 635aa44..8735aa0 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -90,6 +90,7 @@
#define pte_val(x) ((x).pte)
#define __pte(x) ((pte_t) { (x) } )
#endif
+typedef struct page *pgtable_t;
/*
* For 3-level pagetables we defines these ourselves, for 2-level the
diff --git a/include/asm-mips/pgalloc.h b/include/asm-mips/pgalloc.h
index c4efece..1275831 100644
--- a/include/asm-mips/pgalloc.h
+++ b/include/asm-mips/pgalloc.h
@@ -20,10 +20,11 @@
}
static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
- struct page *pte)
+ pgtable_t pte)
{
set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
/*
* Initialize a new pmd table with invalid pointers.
@@ -79,9 +80,10 @@
struct page *pte;
pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER);
- if (pte)
+ if (pte) {
clear_highpage(pte);
-
+ pgtable_page_ctor(pte);
+ }
return pte;
}
@@ -90,12 +92,17 @@
free_pages((unsigned long)pte, PTE_ORDER);
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
__free_pages(pte, PTE_ORDER);
}
-#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb), pte); \
+} while (0)
#ifdef CONFIG_32BIT
diff --git a/include/asm-mips/posix_types.h b/include/asm-mips/posix_types.h
index c2e8a00..c200102 100644
--- a/include/asm-mips/posix_types.h
+++ b/include/asm-mips/posix_types.h
@@ -69,7 +69,7 @@
#endif
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
@@ -139,6 +139,6 @@
}
}
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif /* _ASM_POSIX_TYPES_H */
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
index 36f42de..58cbac5 100644
--- a/include/asm-mips/processor.h
+++ b/include/asm-mips/processor.h
@@ -39,6 +39,7 @@
* so don't change it unless you know what you are doing.
*/
#define TASK_SIZE 0x7fff8000UL
+#define STACK_TOP TASK_SIZE
/*
* This decides where the kernel will search for a free chunk of vm
@@ -57,6 +58,8 @@
*/
#define TASK_SIZE32 0x7fff8000UL
#define TASK_SIZE 0x10000000000UL
+#define STACK_TOP \
+ (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
/*
* This decides where the kernel will search for a free chunk of vm
@@ -69,6 +72,10 @@
(test_tsk_thread_flag(tsk, TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
#endif
+#ifdef __KERNEL__
+#define STACK_TOP_MAX TASK_SIZE
+#endif
+
#define NUM_FPU_REGS 32
typedef __u64 fpureg_t;
diff --git a/include/asm-mn10300/.gitignore b/include/asm-mn10300/.gitignore
new file mode 100644
index 0000000..0f87ba7
--- /dev/null
+++ b/include/asm-mn10300/.gitignore
@@ -0,0 +1,2 @@
+proc
+unit
diff --git a/include/asm-mn10300/Kbuild b/include/asm-mn10300/Kbuild
new file mode 100644
index 0000000..79384c5
--- /dev/null
+++ b/include/asm-mn10300/Kbuild
@@ -0,0 +1,5 @@
+include include/asm-generic/Kbuild.asm
+
+unifdef-y += termios.h
+unifdef-y += ptrace.h
+unifdef-y += page.h
diff --git a/include/asm-mn10300/atomic.h b/include/asm-mn10300/atomic.h
new file mode 100644
index 0000000..27c9690
--- /dev/null
+++ b/include/asm-mn10300/atomic.h
@@ -0,0 +1,166 @@
+/* MN10300 Atomic counter operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct {
+ int counter;
+} atomic_t;
+
+#define ATOMIC_INIT(i) { (i) }
+
+#ifdef __KERNEL__
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v. Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_read(v) ((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i. Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+#include <asm/system.h>
+
+/**
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int temp;
+
+ local_irq_save(flags);
+ temp = v->counter;
+ temp += i;
+ v->counter = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+/**
+ * atomic_sub_return - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int temp;
+
+ local_irq_save(flags);
+ temp = v->counter;
+ temp -= i;
+ v->counter = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+ return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+ atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+ atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+ atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+
+#define atomic_add_unless(v, a, u) \
+({ \
+ int c, old; \
+ c = atomic_read(v); \
+ while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+ c = old; \
+ c != (u); \
+})
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+ unsigned long flags;
+
+ mask = ~mask;
+ local_irq_save(flags);
+ *addr &= mask;
+ local_irq_restore(flags);
+}
+
+#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v)))
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
+
+/* Atomic operations are already serializing on MN10300??? */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#include <asm-generic/atomic.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ATOMIC_H */
diff --git a/include/asm-mn10300/auxvec.h b/include/asm-mn10300/auxvec.h
new file mode 100644
index 0000000..4fdb60b
--- /dev/null
+++ b/include/asm-mn10300/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif
diff --git a/include/asm-mn10300/bitops.h b/include/asm-mn10300/bitops.h
new file mode 100644
index 0000000..cc6d40c
--- /dev/null
+++ b/include/asm-mn10300/bitops.h
@@ -0,0 +1,229 @@
+/* MN10300 bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+#ifndef __ASM_BITOPS_H
+#define __ASM_BITOPS_H
+
+#include <asm/cpu-regs.h>
+
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+/*
+ * set bit
+ */
+#define __set_bit(nr, addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bset %2,(%1) # set_bit reg" \
+ : "=m"(*_a) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+})
+
+#define set_bit(nr, addr) __set_bit((nr), (addr))
+
+/*
+ * clear bit
+ */
+#define ___clear_bit(nr, addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bclr %2,(%1) # clear_bit reg" \
+ : "=m"(*_a) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+})
+
+#define clear_bit(nr, addr) ___clear_bit((nr), (addr))
+
+
+static inline void __clear_bit(int nr, volatile void *addr)
+{
+ unsigned int *a = (unsigned int *) addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ *a &= ~mask;
+}
+
+/*
+ * test bit
+ */
+static inline int test_bit(int nr, const volatile void *addr)
+{
+ return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/*
+ * change bit
+ */
+static inline void __change_bit(int nr, volatile void *addr)
+{
+ int mask;
+ unsigned int *a = (unsigned int *) addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ *a ^= mask;
+}
+
+extern void change_bit(int nr, volatile void *addr);
+
+/*
+ * test and set bit
+ */
+#define __test_and_set_bit(nr,addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ unsigned epsw; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bset %3,(%2) # test_set_bit reg\n" \
+ "mov epsw,%1" \
+ : "=m"(*_a), "=d"(epsw) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+ \
+ !(epsw & EPSW_FLAG_Z); \
+})
+
+#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr))
+
+/*
+ * test and clear bit
+ */
+#define __test_and_clear_bit(nr, addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ unsigned epsw; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bclr %3,(%2) # test_clear_bit reg\n" \
+ "mov epsw,%1" \
+ : "=m"(*_a), "=d"(epsw) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+ \
+ !(epsw & EPSW_FLAG_Z); \
+})
+
+#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr))
+
+/*
+ * test and change bit
+ */
+static inline int __test_and_change_bit(int nr, volatile void *addr)
+{
+ int mask, retval;
+ unsigned int *a = (unsigned int *)addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ retval = (mask & *a) != 0;
+ *a ^= mask;
+
+ return retval;
+}
+
+extern int test_and_change_bit(int nr, volatile void *addr);
+
+#include <asm-generic/bitops/lock.h>
+
+#ifdef __KERNEL__
+
+/**
+ * __ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 31..0 to indicate bit 31..0 most least significant bit set
+ * - if no bits are set in x, the result is undefined
+ */
+static inline __attribute__((const))
+unsigned long __ffs(unsigned long x)
+{
+ int bit;
+ asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x));
+ return bit;
+}
+
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+ int bit;
+ asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n));
+ return bit;
+}
+
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs:
+ * - return 32..1 to indicate bit 31..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int fls(int x)
+{
+ return (x != 0) ? __ilog2_u32(x) + 1 : 0;
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 32..1 to indicate bit 31..0 most least significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int ffs(int x)
+{
+ /* Note: (x & -x) gives us a mask that is the least significant
+ * (rightmost) 1-bit of the value in x.
+ */
+ return fls(x & -x);
+}
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+ test_and_set_bit((nr) ^ 0x18, (addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+ test_and_clear_bit((nr) ^ 0x18, (addr))
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_BITOPS_H */
diff --git a/include/asm-mn10300/bug.h b/include/asm-mn10300/bug.h
new file mode 100644
index 0000000..4fcf338
--- /dev/null
+++ b/include/asm-mn10300/bug.h
@@ -0,0 +1,35 @@
+/* MN10300 Kernel bug reporting
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+
+/*
+ * Tell the user there is some problem.
+ */
+#define _debug_bug_trap() \
+do { \
+ asm volatile( \
+ " syscall 15 \n" \
+ "0: \n" \
+ " .section __bug_table,\"a\" \n" \
+ " .long 0b,%0,%1 \n" \
+ " .previous \n" \
+ : \
+ : "i"(__FILE__), "i"(__LINE__) \
+ ); \
+} while (0)
+
+#define BUG() _debug_bug_trap()
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_BUG_H */
diff --git a/include/asm-mn10300/bugs.h b/include/asm-mn10300/bugs.h
new file mode 100644
index 0000000..31c8bc5
--- /dev/null
+++ b/include/asm-mn10300/bugs.h
@@ -0,0 +1,20 @@
+/* MN10300 Checks for architecture-dependent bugs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+
+#include <asm/processor.h>
+
+static inline void __init check_bugs(void)
+{
+}
+
+#endif /* _ASM_BUGS_H */
diff --git a/include/asm-mn10300/busctl-regs.h b/include/asm-mn10300/busctl-regs.h
new file mode 100644
index 0000000..1632aef
--- /dev/null
+++ b/include/asm-mn10300/busctl-regs.h
@@ -0,0 +1,151 @@
+/* AM33v2 on-board bus controller registers
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* bus controller registers */
+#define BCCR __SYSREG(0xc0002000, u32) /* bus controller control reg */
+#define BCCR_B0AD 0x00000003 /* block 0 (80000000-83ffffff) bus allocation */
+#define BCCR_B1AD 0x0000000c /* block 1 (84000000-87ffffff) bus allocation */
+#define BCCR_B2AD 0x00000030 /* block 2 (88000000-8bffffff) bus allocation */
+#define BCCR_B3AD 0x000000c0 /* block 3 (8c000000-8fffffff) bus allocation */
+#define BCCR_B4AD 0x00000300 /* block 4 (90000000-93ffffff) bus allocation */
+#define BCCR_B5AD 0x00000c00 /* block 5 (94000000-97ffffff) bus allocation */
+#define BCCR_B6AD 0x00003000 /* block 6 (98000000-9bffffff) bus allocation */
+#define BCCR_B7AD 0x0000c000 /* block 7 (9c000000-9fffffff) bus allocation */
+#define BCCR_BxAD_EXBUS 0x0 /* - direct to system bus controller */
+#define BCCR_BxAD_OPEXBUS 0x1 /* - direct to memory bus controller */
+#define BCCR_BxAD_OCMBUS 0x2 /* - direct to on chip memory */
+#define BCCR_API 0x00070000 /* bus arbitration priority */
+#define BCCR_API_DMACICD 0x00000000 /* - DMA > CI > CD */
+#define BCCR_API_DMACDCI 0x00010000 /* - DMA > CD > CI */
+#define BCCR_API_CICDDMA 0x00020000 /* - CI > CD > DMA */
+#define BCCR_API_CDCIDMA 0x00030000 /* - CD > CI > DMA */
+#define BCCR_API_ROUNDROBIN 0x00040000 /* - round robin */
+#define BCCR_BEPRI_DMACICD 0x00c00000 /* bus error address priority */
+#define BCCR_BEPRI_DMACDCI 0x00000000 /* - DMA > CI > CD */
+#define BCCR_BEPRI_CICDDMA 0x00400000 /* - DMA > CD > CI */
+#define BCCR_BEPRI_CDCIDMA 0x00800000 /* - CI > CD > DMA */
+#define BCCR_BEPRI 0x00c00000 /* - CD > CI > DMA */
+#define BCCR_TMON 0x03000000 /* timeout value settings */
+#define BCCR_TMON_16IOCLK 0x00000000 /* - 16 IOCLK cycles */
+#define BCCR_TMON_256IOCLK 0x01000000 /* - 256 IOCLK cycles */
+#define BCCR_TMON_4096IOCLK 0x02000000 /* - 4096 IOCLK cycles */
+#define BCCR_TMON_65536IOCLK 0x03000000 /* - 65536 IOCLK cycles */
+#define BCCR_TMOE 0x10000000 /* timeout detection enable */
+
+#define BCBERR __SYSREG(0xc0002010, u32) /* bus error source reg */
+#define BCBERR_BESB 0x0000001f /* erroneous access destination space */
+#define BCBERR_BESB_MON 0x00000001 /* - monitor space */
+#define BCBERR_BESB_IO 0x00000002 /* - IO bus */
+#define BCBERR_BESB_EX 0x00000004 /* - EX bus */
+#define BCBERR_BESB_OPEX 0x00000008 /* - OpEX bus */
+#define BCBERR_BESB_OCM 0x00000010 /* - on chip memory */
+#define BCBERR_BERW 0x00000100 /* type of access */
+#define BCBERR_BERW_WRITE 0x00000000 /* - write */
+#define BCBERR_BERW_READ 0x00000100 /* - read */
+#define BCBERR_BESD 0x00000200 /* error detector */
+#define BCBERR_BESD_BCU 0x00000000 /* - BCU detected error */
+#define BCBERR_BESD_SLAVE_BUS 0x00000200 /* - slave bus detected error */
+#define BCBERR_BEBST 0x00000400 /* type of access */
+#define BCBERR_BEBST_SINGLE 0x00000000 /* - single */
+#define BCBERR_BEBST_BURST 0x00000400 /* - burst */
+#define BCBERR_BEME 0x00000800 /* multiple bus error flag */
+#define BCBERR_BEMR 0x00007000 /* master bus that caused the error */
+#define BCBERR_BEMR_NOERROR 0x00000000 /* - no error */
+#define BCBERR_BEMR_CI 0x00001000 /* - CPU instruction fetch bus caused error */
+#define BCBERR_BEMR_CD 0x00002000 /* - CPU data bus caused error */
+#define BCBERR_BEMR_DMA 0x00004000 /* - DMA bus caused error */
+
+#define BCBEAR __SYSREGC(0xc0002020, u32) /* bus error address reg */
+
+/* system bus controller registers */
+#define SBBASE(X) __SYSREG(0xd8c00100 + (X) * 0x10, u32) /* SBC base addr regs */
+#define SBBASE_BE 0x00000001 /* bank enable */
+#define SBBASE_BAM 0x0000fffe /* bank address mask [31:17] */
+#define SBBASE_BBA 0xfffe0000 /* bank base address [31:17] */
+
+#define SBCNTRL0(X) __SYSREG(0xd8c00200 + (X) * 0x10, u32) /* SBC bank ctrl0 regs */
+#define SBCNTRL0_WEH 0x00000f00 /* write enable hold */
+#define SBCNTRL0_REH 0x0000f000 /* read enable hold */
+#define SBCNTRL0_RWH 0x000f0000 /* SRW signal hold */
+#define SBCNTRL0_CSH 0x00f00000 /* chip select hold */
+#define SBCNTRL0_DAH 0x0f000000 /* data hold */
+#define SBCNTRL0_ADH 0xf0000000 /* address hold */
+
+#define SBCNTRL1(X) __SYSREG(0xd8c00204 + (X) * 0x10, u32) /* SBC bank ctrl1 regs */
+#define SBCNTRL1_WED 0x00000f00 /* write enable delay */
+#define SBCNTRL1_RED 0x0000f000 /* read enable delay */
+#define SBCNTRL1_RWD 0x000f0000 /* SRW signal delay */
+#define SBCNTRL1_ASW 0x00f00000 /* address strobe width */
+#define SBCNTRL1_CSD 0x0f000000 /* chip select delay */
+#define SBCNTRL1_ASD 0xf0000000 /* address strobe delay */
+
+#define SBCNTRL2(X) __SYSREG(0xd8c00208 + (X) * 0x10, u32) /* SBC bank ctrl2 regs */
+#define SBCNTRL2_WC 0x000000ff /* wait count */
+#define SBCNTRL2_BWC 0x00000f00 /* burst wait count */
+#define SBCNTRL2_WM 0x01000000 /* wait mode setting */
+#define SBCNTRL2_WM_FIXEDWAIT 0x00000000 /* - fixed wait access */
+#define SBCNTRL2_WM_HANDSHAKE 0x01000000 /* - handshake access */
+#define SBCNTRL2_BM 0x02000000 /* bus synchronisation mode */
+#define SBCNTRL2_BM_SYNC 0x00000000 /* - synchronous mode */
+#define SBCNTRL2_BM_ASYNC 0x02000000 /* - asynchronous mode */
+#define SBCNTRL2_BW 0x04000000 /* bus width */
+#define SBCNTRL2_BW_32 0x00000000 /* - 32 bits */
+#define SBCNTRL2_BW_16 0x04000000 /* - 16 bits */
+#define SBCNTRL2_RWINV 0x08000000 /* R/W signal invert polarity */
+#define SBCNTRL2_RWINV_NORM 0x00000000 /* - normal (read high) */
+#define SBCNTRL2_RWINV_INV 0x08000000 /* - inverted (read low) */
+#define SBCNTRL2_BT 0x70000000 /* bus type setting */
+#define SBCNTRL2_BT_SRAM 0x00000000 /* - SRAM interface */
+#define SBCNTRL2_BT_ADMUX 0x00000000 /* - addr/data multiplexed interface */
+#define SBCNTRL2_BT_BROM 0x00000000 /* - burst ROM interface */
+#define SBCNTRL2_BTSE 0x80000000 /* burst enable */
+
+/* memory bus controller */
+#define SDBASE(X) __SYSREG(0xda000008 + (X) * 0x4, u32) /* MBC base addr regs */
+#define SDBASE_CE 0x00000001 /* chip enable */
+#define SDBASE_CBAM 0x0000fff0 /* chip base address mask [31:20] */
+#define SDBASE_CBAM_SHIFT 16
+#define SDBASE_CBA 0xfff00000 /* chip base address [31:20] */
+
+#define SDRAMBUS __SYSREG(0xda000000, u32) /* bus mode control reg */
+#define SDRAMBUS_REFEN 0x00000004 /* refresh enable */
+#define SDRAMBUS_TRC 0x00000018 /* refresh command delay time */
+#define SDRAMBUS_BSTPT 0x00000020 /* burst stop command enable */
+#define SDRAMBUS_PONSEQ 0x00000040 /* power on sequence */
+#define SDRAMBUS_SELFREQ 0x00000080 /* self-refresh mode request */
+#define SDRAMBUS_SELFON 0x00000100 /* self-refresh mode on */
+#define SDRAMBUS_SIZE 0x00030000 /* SDRAM size */
+#define SDRAMBUS_SIZE_64Mbit 0x00010000 /* 64Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_128Mbit 0x00020000 /* 128Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_256Mbit 0x00030000 /* 256Mbit SDRAM (x16) */
+#define SDRAMBUS_TRASWAIT 0x000c0000 /* row address precharge command cycle number */
+#define SDRAMBUS_REFNUM 0x00300000 /* refresh command number */
+#define SDRAMBUS_BSTWAIT 0x00c00000 /* burst stop command cycle */
+#define SDRAMBUS_SETWAIT 0x03000000 /* mode register setting command cycle */
+#define SDRAMBUS_PREWAIT 0x0c000000 /* precharge command cycle */
+#define SDRAMBUS_RASLATE 0x30000000 /* RAS latency */
+#define SDRAMBUS_CASLATE 0xc0000000 /* CAS latency */
+
+#define SDREFCNT __SYSREG(0xda000004, u32) /* refresh period reg */
+#define SDREFCNT_PERI 0x00000fff /* refresh period */
+
+#define SDSHDW __SYSREG(0xda000010, u32) /* test reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BUSCTL_REGS_H */
diff --git a/include/asm-mn10300/byteorder.h b/include/asm-mn10300/byteorder.h
new file mode 100644
index 0000000..3c993cc
--- /dev/null
+++ b/include/asm-mn10300/byteorder.h
@@ -0,0 +1,46 @@
+/* MN10300 Byte-order primitive construction
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+static inline __attribute__((const))
+__u32 ___arch__swab32(__u32 x)
+{
+ __u32 ret;
+ asm("swap %1,%0" : "=r" (ret) : "r" (x));
+ return ret;
+}
+
+static inline __attribute__((const))
+__u16 ___arch__swab16(__u16 x)
+{
+ __u16 ret;
+ asm("swaph %1,%0" : "=r" (ret) : "r" (x));
+ return ret;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/include/asm-mn10300/cache.h b/include/asm-mn10300/cache.h
new file mode 100644
index 0000000..9e01122
--- /dev/null
+++ b/include/asm-mn10300/cache.h
@@ -0,0 +1,54 @@
+/* MN10300 cache management registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <asm/cpu-regs.h>
+#include <asm/proc/cache.h>
+
+#ifndef __ASSEMBLY__
+#define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+#else
+#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES
+#endif
+
+/* data cache purge registers
+ * - read from the register to unconditionally purge that cache line
+ * - write address & 0xffffff00 to conditionally purge that cache line
+ * - clear LSB to request invalidation as well
+ */
+#define DCACHE_PURGE(WAY, ENTRY) \
+ __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \
+ (ENTRY) * L1_CACHE_BYTES, u32)
+
+#define DCACHE_PURGE_WAY0(ENTRY) \
+ __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY1(ENTRY) \
+ __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY2(ENTRY) \
+ __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY3(ENTRY) \
+ __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+
+/* instruction cache access registers */
+#define ICACHE_DATA(WAY, ENTRY, OFF) \
+ __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define ICACHE_TAG(WAY, ENTRY) \
+ __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+/* instruction cache access registers */
+#define DCACHE_DATA(WAY, ENTRY, OFF) \
+ __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define DCACHE_TAG(WAY, ENTRY) \
+ __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+#endif /* _ASM_CACHE_H */
diff --git a/include/asm-mn10300/cacheflush.h b/include/asm-mn10300/cacheflush.h
new file mode 100644
index 0000000..2db746a
--- /dev/null
+++ b/include/asm-mn10300/cacheflush.h
@@ -0,0 +1,116 @@
+/* MN10300 Cache flushing
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+/* Keep includes the same across arches. */
+#include <linux/mm.h>
+
+/*
+ * virtually-indexed cache managment (our cache is physically indexed)
+ */
+#define flush_cache_all() do {} while (0)
+#define flush_cache_mm(mm) do {} while (0)
+#define flush_cache_dup_mm(mm) do {} while (0)
+#define flush_cache_range(mm, start, end) do {} while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do {} while (0)
+#define flush_cache_vmap(start, end) do {} while (0)
+#define flush_cache_vunmap(start, end) do {} while (0)
+#define flush_dcache_page(page) do {} while (0)
+#define flush_dcache_mmap_lock(mapping) do {} while (0)
+#define flush_dcache_mmap_unlock(mapping) do {} while (0)
+
+/*
+ * physically-indexed cache managment
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
+
+#else
+
+#define flush_icache_range(start, end) do {} while (0)
+#define flush_icache_page(vma, pg) do {} while (0)
+
+#endif
+
+#define flush_icache_user_range(vma, pg, adr, len) \
+ flush_icache_range(adr, adr + len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ do { \
+ memcpy(dst, src, len); \
+ flush_icache_page(vma, page); \
+ } while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+/*
+ * primitive routines
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern void mn10300_icache_inv(void);
+extern void mn10300_dcache_inv(void);
+extern void mn10300_dcache_inv_page(unsigned start);
+extern void mn10300_dcache_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_inv_range2(unsigned start, unsigned size);
+#ifdef CONFIG_MN10300_CACHE_WBACK
+extern void mn10300_dcache_flush(void);
+extern void mn10300_dcache_flush_page(unsigned start);
+extern void mn10300_dcache_flush_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_range2(unsigned start, unsigned size);
+extern void mn10300_dcache_flush_inv(void);
+extern void mn10300_dcache_flush_inv_page(unsigned start);
+extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size);
+#else
+#define mn10300_dcache_flush() do {} while (0)
+#define mn10300_dcache_flush_page(start) do {} while (0)
+#define mn10300_dcache_flush_range(start, end) do {} while (0)
+#define mn10300_dcache_flush_range2(start, size) do {} while (0)
+#define mn10300_dcache_flush_inv() mn10300_dcache_inv()
+#define mn10300_dcache_flush_inv_page(start) \
+ mn10300_dcache_inv_page((start))
+#define mn10300_dcache_flush_inv_range(start, end) \
+ mn10300_dcache_inv_range((start), (end))
+#define mn10300_dcache_flush_inv_range2(start, size) \
+ mn10300_dcache_inv_range2((start), (size))
+#endif /* CONFIG_MN10300_CACHE_WBACK */
+#else
+#define mn10300_icache_inv() do {} while (0)
+#define mn10300_dcache_inv() do {} while (0)
+#define mn10300_dcache_inv_page(start) do {} while (0)
+#define mn10300_dcache_inv_range(start, end) do {} while (0)
+#define mn10300_dcache_inv_range2(start, size) do {} while (0)
+#define mn10300_dcache_flush() do {} while (0)
+#define mn10300_dcache_flush_inv_page(start) do {} while (0)
+#define mn10300_dcache_flush_inv() do {} while (0)
+#define mn10300_dcache_flush_inv_range(start, end) do {} while (0)
+#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0)
+#define mn10300_dcache_flush_page(start) do {} while (0)
+#define mn10300_dcache_flush_range(start, end) do {} while (0)
+#define mn10300_dcache_flush_range2(start, size) do {} while (0)
+#endif /* CONFIG_MN10300_CACHE_DISABLED */
+
+/*
+ * internal debugging function
+ */
+#ifdef CONFIG_DEBUG_PAGEALLOC
+extern void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/include/asm-mn10300/checksum.h b/include/asm-mn10300/checksum.h
new file mode 100644
index 0000000..9fb2a8d
--- /dev/null
+++ b/include/asm-mn10300/checksum.h
@@ -0,0 +1,86 @@
+/* MN10300 Optimised checksumming code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+extern __wsum csum_partial_copy_from_user(const void *src, void *dst,
+ int len, __wsum sum,
+ int *err_ptr);
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define csum_partial_copy_fromuser csum_partial_copy
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+ __wsum sum);
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ asm(
+ " add %1,%0 \n"
+ " addc 0xffff,%0 \n"
+ : "=r" (sum)
+ : "r" (sum << 16), "0" (sum & 0xffff0000)
+ : "cc"
+ );
+ return (~sum) >> 16;
+}
+
+static inline __wsum csum_tcpudp_nofold(unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ __wsum tmp;
+
+ tmp = (__wsum) ntohs(len) << 16;
+ tmp += (__wsum) proto << 8;
+
+ asm(
+ " add %1,%0 \n"
+ " addc %2,%0 \n"
+ " addc %3,%0 \n"
+ " addc 0,%0 \n"
+ : "=r" (sum)
+ : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum)
+ : "cc"
+ );
+ return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+#undef _HAVE_ARCH_IPV6_CSUM
+
+/*
+ * Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len,
+ __wsum sum, int *err_ptr);
+
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/include/asm-mn10300/cpu-regs.h b/include/asm-mn10300/cpu-regs.h
new file mode 100644
index 0000000..757e9b5
--- /dev/null
+++ b/include/asm-mn10300/cpu-regs.h
@@ -0,0 +1,290 @@
+/* MN10300 Core system registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CPU_REGS_H
+#define _ASM_CPU_REGS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+#ifdef CONFIG_MN10300_CPU_AM33V2
+/* we tell the compiler to pretend to be AM33 so that it doesn't try and use
+ * the FP regs, but tell the assembler that we're actually allowed AM33v2
+ * instructions */
+#ifndef __ASSEMBLY__
+asm(" .am33_2\n");
+#else
+.am33_2
+#endif
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR))
+#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR))
+#else
+#define __SYSREG(ADDR, TYPE) ADDR
+#define __SYSREGC(ADDR, TYPE) ADDR
+#endif
+
+/* CPU registers */
+#define EPSW_FLAG_Z 0x00000001 /* zero flag */
+#define EPSW_FLAG_N 0x00000002 /* negative flag */
+#define EPSW_FLAG_C 0x00000004 /* carry flag */
+#define EPSW_FLAG_V 0x00000008 /* overflow flag */
+#define EPSW_IM 0x00000700 /* interrupt mode */
+#define EPSW_IM_0 0x00000000 /* interrupt mode 0 */
+#define EPSW_IM_1 0x00000100 /* interrupt mode 1 */
+#define EPSW_IM_2 0x00000200 /* interrupt mode 2 */
+#define EPSW_IM_3 0x00000300 /* interrupt mode 3 */
+#define EPSW_IM_4 0x00000400 /* interrupt mode 4 */
+#define EPSW_IM_5 0x00000500 /* interrupt mode 5 */
+#define EPSW_IM_6 0x00000600 /* interrupt mode 6 */
+#define EPSW_IM_7 0x00000700 /* interrupt mode 7 */
+#define EPSW_IE 0x00000800 /* interrupt enable */
+#define EPSW_S 0x00003000 /* software auxilliary bits */
+#define EPSW_T 0x00008000 /* trace enable */
+#define EPSW_nSL 0x00010000 /* not supervisor level */
+#define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */
+#define EPSW_nAR 0x00040000 /* register bank control */
+#define EPSW_ML 0x00080000 /* monitor level */
+#define EPSW_FE 0x00100000 /* FPU enable */
+
+/* FPU registers */
+#define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */
+#define FPCR_EF_U 0x00000002 /* underflow FPU exception flag */
+#define FPCR_EF_O 0x00000004 /* overflow FPU exception flag */
+#define FPCR_EF_Z 0x00000008 /* zero divide FPU exception flag */
+#define FPCR_EF_V 0x00000010 /* invalid operand FPU exception flag */
+#define FPCR_EE_I 0x00000020 /* inexact result FPU exception enable */
+#define FPCR_EE_U 0x00000040 /* underflow FPU exception enable */
+#define FPCR_EE_O 0x00000080 /* overflow FPU exception enable */
+#define FPCR_EE_Z 0x00000100 /* zero divide FPU exception enable */
+#define FPCR_EE_V 0x00000200 /* invalid operand FPU exception enable */
+#define FPCR_EC_I 0x00000400 /* inexact result FPU exception cause */
+#define FPCR_EC_U 0x00000800 /* underflow FPU exception cause */
+#define FPCR_EC_O 0x00001000 /* overflow FPU exception cause */
+#define FPCR_EC_Z 0x00002000 /* zero divide FPU exception cause */
+#define FPCR_EC_V 0x00004000 /* invalid operand FPU exception cause */
+#define FPCR_RM 0x00030000 /* rounding mode */
+#define FPCR_RM_NEAREST 0x00000000 /* - round to nearest value */
+#define FPCR_FCC_U 0x00040000 /* FPU unordered condition code */
+#define FPCR_FCC_E 0x00080000 /* FPU equal condition code */
+#define FPCR_FCC_G 0x00100000 /* FPU greater than condition code */
+#define FPCR_FCC_L 0x00200000 /* FPU less than condition code */
+#define FPCR_INIT 0x00000000 /* no exceptions, rounding to nearest */
+
+/* CPU control registers */
+#define CPUP __SYSREG(0xc0000020, u16) /* CPU pipeline register */
+#define CPUP_DWBD 0x0020 /* write buffer disable flag */
+#define CPUP_IPFD 0x0040 /* instruction prefetch disable flag */
+#define CPUP_EXM 0x0080 /* exception operation mode */
+#define CPUP_EXM_AM33V1 0x0000 /* - AM33 v1 exception mode */
+#define CPUP_EXM_AM33V2 0x0080 /* - AM33 v2 exception mode */
+
+#define CPUM __SYSREG(0xc0000040, u16) /* CPU mode register */
+#define CPUM_SLEEP 0x0004 /* set to enter sleep state */
+#define CPUM_HALT 0x0008 /* set to enter halt state */
+#define CPUM_STOP 0x0010 /* set to enter stop state */
+
+#define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */
+#define CPUREV_TYPE 0x0000000f /* CPU type */
+#define CPUREV_TYPE_S 0
+#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */
+#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */
+#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */
+#define CPUREV_REVISION 0x000000f0 /* CPU revision */
+#define CPUREV_REVISION_S 4
+#define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */
+#define CPUREV_ICWAY_S 8
+#define CPUREV_ICSIZE 0x0000f000 /* instruction cache way size */
+#define CPUREV_ICSIZE_S 12
+#define CPUREV_DCWAY 0x000f0000 /* number of data cache ways */
+#define CPUREV_DCWAY_S 16
+#define CPUREV_DCSIZE 0x00f00000 /* data cache way size */
+#define CPUREV_DCSIZE_S 20
+#define CPUREV_FPUTYPE 0x0f000000 /* FPU core type */
+#define CPUREV_FPUTYPE_NONE 0x00000000 /* - no FPU core implemented */
+#define CPUREV_OCDCTG 0xf0000000 /* on-chip debug function category */
+
+#define DCR __SYSREG(0xc0000030, u16) /* Debug control register */
+
+/* interrupt/exception control registers */
+#define IVAR0 __SYSREG(0xc0000000, u16) /* interrupt vector 0 */
+#define IVAR1 __SYSREG(0xc0000004, u16) /* interrupt vector 1 */
+#define IVAR2 __SYSREG(0xc0000008, u16) /* interrupt vector 2 */
+#define IVAR3 __SYSREG(0xc000000c, u16) /* interrupt vector 3 */
+#define IVAR4 __SYSREG(0xc0000010, u16) /* interrupt vector 4 */
+#define IVAR5 __SYSREG(0xc0000014, u16) /* interrupt vector 5 */
+#define IVAR6 __SYSREG(0xc0000018, u16) /* interrupt vector 6 */
+
+#define TBR __SYSREG(0xc0000024, u32) /* Trap table base */
+#define TBR_TB 0xff000000 /* table base address bits 31-24 */
+#define TBR_INT_CODE 0x00ffffff /* interrupt code */
+
+#define DEAR __SYSREG(0xc0000038, u32) /* Data access exception address */
+
+#define sISR __SYSREG(0xc0000044, u32) /* Supervisor interrupt status */
+#define sISR_IRQICE 0x00000001 /* ICE interrupt */
+#define sISR_ISTEP 0x00000002 /* single step interrupt */
+#define sISR_MISSA 0x00000004 /* memory access address misalignment fault */
+#define sISR_UNIMP 0x00000008 /* unimplemented instruction execution fault */
+#define sISR_PIEXE 0x00000010 /* program interrupt */
+#define sISR_MEMERR 0x00000020 /* illegal memory access fault */
+#define sISR_IBREAK 0x00000040 /* instraction break interrupt */
+#define sISR_DBSRL 0x00000080 /* debug serial interrupt */
+#define sISR_PERIDB 0x00000100 /* peripheral debug interrupt */
+#define sISR_EXUNIMP 0x00000200 /* unimplemented ex-instruction execution fault */
+#define sISR_OBREAK 0x00000400 /* operand break interrupt */
+#define sISR_PRIV 0x00000800 /* privileged instruction execution fault */
+#define sISR_BUSERR 0x00001000 /* bus error fault */
+#define sISR_DBLFT 0x00002000 /* double fault */
+#define sISR_DBG 0x00008000 /* debug reserved interrupt */
+#define sISR_ITMISS 0x00010000 /* instruction TLB miss */
+#define sISR_DTMISS 0x00020000 /* data TLB miss */
+#define sISR_ITEX 0x00040000 /* instruction TLB access exception */
+#define sISR_DTEX 0x00080000 /* data TLB access exception */
+#define sISR_ILGIA 0x00100000 /* illegal instruction access exception */
+#define sISR_ILGDA 0x00200000 /* illegal data access exception */
+#define sISR_IOIA 0x00400000 /* internal I/O space instruction access excep */
+#define sISR_PRIVA 0x00800000 /* privileged space instruction access excep */
+#define sISR_PRIDA 0x01000000 /* privileged space data access excep */
+#define sISR_DISA 0x02000000 /* data space instruction access excep */
+#define sISR_SYSC 0x04000000 /* system call instruction excep */
+#define sISR_FPUD 0x08000000 /* FPU disabled excep */
+#define sISR_FPUUI 0x10000000 /* FPU unimplemented instruction excep */
+#define sISR_FPUOP 0x20000000 /* FPU operation excep */
+#define sISR_NE 0x80000000 /* multiple synchronous exceptions excep */
+
+/* cache control registers */
+#define CHCTR __SYSREG(0xc0000070, u16) /* cache control */
+#define CHCTR_ICEN 0x0001 /* instruction cache enable */
+#define CHCTR_DCEN 0x0002 /* data cache enable */
+#define CHCTR_ICBUSY 0x0004 /* instruction cache busy */
+#define CHCTR_DCBUSY 0x0008 /* data cache busy */
+#define CHCTR_ICINV 0x0010 /* instruction cache invalidate */
+#define CHCTR_DCINV 0x0020 /* data cache invalidate */
+#define CHCTR_DCWTMD 0x0040 /* data cache writing mode */
+#define CHCTR_DCWTMD_WRBACK 0x0000 /* - write back mode */
+#define CHCTR_DCWTMD_WRTHROUGH 0x0040 /* - write through mode */
+#define CHCTR_DCALMD 0x0080 /* data cache allocation mode */
+#define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */
+#define CHCTR_DCWMD 0xf000 /* data cache way mode */
+
+/* MMU control registers */
+#define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */
+#define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */
+#define MMUCTR_ITE 0x00000040 /* instruction TLB enable */
+#define MMUCTR_IIV 0x00000080 /* instruction TLB invalidate */
+#define MMUCTR_ITL 0x00000700 /* instruction TLB lock pointer */
+#define MMUCTR_ITL_NOLOCK 0x00000000 /* - no lock */
+#define MMUCTR_ITL_LOCK0 0x00000100 /* - entry 0 locked */
+#define MMUCTR_ITL_LOCK0_1 0x00000200 /* - entry 0-1 locked */
+#define MMUCTR_ITL_LOCK0_3 0x00000300 /* - entry 0-3 locked */
+#define MMUCTR_ITL_LOCK0_7 0x00000400 /* - entry 0-7 locked */
+#define MMUCTR_ITL_LOCK0_15 0x00000500 /* - entry 0-15 locked */
+#define MMUCTR_CE 0x00008000 /* cacheable bit enable */
+#define MMUCTR_DRP 0x003f0000 /* data TLB replace pointer */
+#define MMUCTR_DTE 0x00400000 /* data TLB enable */
+#define MMUCTR_DIV 0x00800000 /* data TLB invalidate */
+#define MMUCTR_DTL 0x07000000 /* data TLB lock pointer */
+#define MMUCTR_DTL_NOLOCK 0x00000000 /* - no lock */
+#define MMUCTR_DTL_LOCK0 0x01000000 /* - entry 0 locked */
+#define MMUCTR_DTL_LOCK0_1 0x02000000 /* - entry 0-1 locked */
+#define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */
+#define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */
+#define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */
+
+#define PIDR __SYSREG(0xc0000094, u16) /* PID register */
+#define PIDR_PID 0x00ff /* process identifier */
+
+#define PTBR __SYSREG(0xc0000098, unsigned long) /* Page table base register */
+
+#define IPTEL __SYSREG(0xc00000a0, u32) /* instruction TLB entry */
+#define DPTEL __SYSREG(0xc00000b0, u32) /* data TLB entry */
+#define xPTEL_V 0x00000001 /* TLB entry valid */
+#define xPTEL_UNUSED1 0x00000002 /* unused bit */
+#define xPTEL_UNUSED2 0x00000004 /* unused bit */
+#define xPTEL_C 0x00000008 /* cached if set */
+#define xPTEL_PV 0x00000010 /* page valid */
+#define xPTEL_D 0x00000020 /* dirty */
+#define xPTEL_PR 0x000001c0 /* page protection */
+#define xPTEL_PR_ROK 0x00000000 /* - R/O kernel */
+#define xPTEL_PR_RWK 0x00000100 /* - R/W kernel */
+#define xPTEL_PR_ROK_ROU 0x00000080 /* - R/O kernel and R/O user */
+#define xPTEL_PR_RWK_ROU 0x00000180 /* - R/W kernel and R/O user */
+#define xPTEL_PR_RWK_RWU 0x000001c0 /* - R/W kernel and R/W user */
+#define xPTEL_G 0x00000200 /* global (use PID if 0) */
+#define xPTEL_PS 0x00000c00 /* page size */
+#define xPTEL_PS_4Kb 0x00000000 /* - 4Kb page */
+#define xPTEL_PS_128Kb 0x00000400 /* - 128Kb page */
+#define xPTEL_PS_1Kb 0x00000800 /* - 1Kb page */
+#define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */
+#define xPTEL_PPN 0xfffff006 /* physical page number */
+
+#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */
+#define xPTEL_UNUSED1_BIT 1
+#define xPTEL_UNUSED2_BIT 2
+#define xPTEL_C_BIT 3
+#define xPTEL_PV_BIT 4
+#define xPTEL_D_BIT 5
+#define xPTEL_G_BIT 9
+
+#define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */
+#define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */
+#define xPTEU_VPN 0xfffffc00 /* virtual page number */
+#define xPTEU_PID 0x000000ff /* process identifier to which applicable */
+
+#define IPTEL2 __SYSREG(0xc00000a8, u32) /* instruction TLB entry */
+#define DPTEL2 __SYSREG(0xc00000b8, u32) /* data TLB entry */
+#define xPTEL2_V 0x00000001 /* TLB entry valid */
+#define xPTEL2_C 0x00000002 /* cacheable */
+#define xPTEL2_PV 0x00000004 /* page valid */
+#define xPTEL2_D 0x00000008 /* dirty */
+#define xPTEL2_PR 0x00000070 /* page protection */
+#define xPTEL2_PR_ROK 0x00000000 /* - R/O kernel */
+#define xPTEL2_PR_RWK 0x00000040 /* - R/W kernel */
+#define xPTEL2_PR_ROK_ROU 0x00000020 /* - R/O kernel and R/O user */
+#define xPTEL2_PR_RWK_ROU 0x00000060 /* - R/W kernel and R/O user */
+#define xPTEL2_PR_RWK_RWU 0x00000070 /* - R/W kernel and R/W user */
+#define xPTEL2_G 0x00000080 /* global (use PID if 0) */
+#define xPTEL2_PS 0x00000300 /* page size */
+#define xPTEL2_PS_4Kb 0x00000000 /* - 4Kb page */
+#define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */
+#define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */
+#define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */
+#define xPTEL2_PPN 0xfffffc00 /* physical page number */
+
+#define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */
+#define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */
+#define MMUFCR_DFC __SYSREGC(0xc000009e, u16) /* MMU data exception cause */
+#define MMUFCR_xFC_TLBMISS 0x0001 /* TLB miss flag */
+#define MMUFCR_xFC_INITWR 0x0002 /* initial write excep flag */
+#define MMUFCR_xFC_PGINVAL 0x0004 /* page invalid excep flag */
+#define MMUFCR_xFC_PROTVIOL 0x0008 /* protection violation excep flag */
+#define MMUFCR_xFC_ACCESS 0x0010 /* access level flag */
+#define MMUFCR_xFC_ACCESS_USR 0x0000 /* - user mode */
+#define MMUFCR_xFC_ACCESS_SR 0x0010 /* - supervisor mode */
+#define MMUFCR_xFC_TYPE 0x0020 /* access type flag */
+#define MMUFCR_xFC_TYPE_READ 0x0000 /* - read */
+#define MMUFCR_xFC_TYPE_WRITE 0x0020 /* - write */
+#define MMUFCR_xFC_PR 0x01c0 /* page protection flag */
+#define MMUFCR_xFC_PR_ROK 0x0000 /* - R/O kernel */
+#define MMUFCR_xFC_PR_RWK 0x0100 /* - R/W kernel */
+#define MMUFCR_xFC_PR_ROK_ROU 0x0080 /* - R/O kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_ROU 0x0180 /* - R/W kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */
+#define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_CPU_REGS_H */
diff --git a/include/asm-mn10300/cputime.h b/include/asm-mn10300/cputime.h
new file mode 100644
index 0000000..6d68ad7
--- /dev/null
+++ b/include/asm-mn10300/cputime.h
@@ -0,0 +1 @@
+#include <asm-generic/cputime.h>
diff --git a/include/asm-mn10300/current.h b/include/asm-mn10300/current.h
new file mode 100644
index 0000000..ca6027d
--- /dev/null
+++ b/include/asm-mn10300/current.h
@@ -0,0 +1,37 @@
+/* MN10300 Current task structure accessor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+/*
+ * dedicate E2 to keeping the current task pointer
+ */
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+
+register struct task_struct *const current asm("e2") __attribute__((used));
+
+#define get_current() current
+
+extern struct task_struct *__current;
+
+#else
+static inline __attribute__((const))
+struct task_struct *get_current(void)
+{
+ return current_thread_info()->task;
+}
+
+#define current get_current()
+#endif
+
+#endif /* _ASM_CURRENT_H */
diff --git a/include/asm-mn10300/delay.h b/include/asm-mn10300/delay.h
new file mode 100644
index 0000000..34517b3
--- /dev/null
+++ b/include/asm-mn10300/delay.h
@@ -0,0 +1,19 @@
+/* MN10300 Uninterruptible delay routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* _ASM_DELAY_H */
diff --git a/include/asm-mn10300/device.h b/include/asm-mn10300/device.h
new file mode 100644
index 0000000..f0a4c25
--- /dev/null
+++ b/include/asm-mn10300/device.h
@@ -0,0 +1 @@
+#include <asm-generic/device.h>
diff --git a/include/asm-mn10300/div64.h b/include/asm-mn10300/div64.h
new file mode 100644
index 0000000..bf9c515
--- /dev/null
+++ b/include/asm-mn10300/div64.h
@@ -0,0 +1,103 @@
+/* MN10300 64-bit division
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DIV64
+#define _ASM_DIV64
+
+#include <linux/types.h>
+
+extern void ____unhandled_size_in_do_div___(void);
+
+/*
+ * divide n by base, leaving the result in n and returning the remainder
+ * - we can do this quite efficiently on the MN10300 by cascading the divides
+ * through the MDR register
+ */
+#define do_div(n, base) \
+({ \
+ unsigned __rem = 0; \
+ if (sizeof(n) <= 4) { \
+ asm("mov %1,mdr \n" \
+ "divu %2,%0 \n" \
+ "mov mdr,%1 \n" \
+ : "+r"(n), "=d"(__rem) \
+ : "r"(base), "1"(__rem) \
+ : "cc" \
+ ); \
+ } else if (sizeof(n) <= 8) { \
+ union { \
+ unsigned long long l; \
+ u32 w[2]; \
+ } __quot; \
+ __quot.l = n; \
+ asm("mov %0,mdr \n" /* MDR = 0 */ \
+ "divu %3,%1 \n" \
+ /* __quot.MSL = __div.MSL / base, */ \
+ /* MDR = MDR:__div.MSL % base */ \
+ "divu %3,%2 \n" \
+ /* __quot.LSL = MDR:__div.LSL / base, */ \
+ /* MDR = MDR:__div.LSL % base */ \
+ "mov mdr,%0 \n" \
+ : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \
+ : "r"(base), "0"(__rem), "1"(__quot.w[1]), \
+ "2"(__quot.w[0]) \
+ : "cc" \
+ ); \
+ n = __quot.l; \
+ } else { \
+ ____unhandled_size_in_do_div___(); \
+ } \
+ __rem; \
+})
+
+/*
+ * do an unsigned 32-bit multiply and divide with intermediate 64-bit product
+ * so as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
+{
+ unsigned result;
+
+ asm("mulu %2,%0 \n" /* MDR:val = val*mult */
+ "divu %3,%0 \n" /* val = MDR:val/div;
+ * MDR = MDR:val%div */
+ : "=r"(result)
+ : "0"(val), "ir"(mult), "r"(div)
+ );
+
+ return result;
+}
+
+/*
+ * do a signed 32-bit multiply and divide with intermediate 64-bit product so
+ * as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+signed __muldiv64s(signed val, signed mult, signed div)
+{
+ signed result;
+
+ asm("mul %2,%0 \n" /* MDR:val = val*mult */
+ "div %3,%0 \n" /* val = MDR:val/div;
+ * MDR = MDR:val%div */
+ : "=r"(result)
+ : "0"(val), "ir"(mult), "r"(div)
+ );
+
+ return result;
+}
+
+extern __attribute__((const))
+uint64_t div64_64(uint64_t dividend, uint64_t divisor);
+
+#endif /* _ASM_DIV64 */
diff --git a/include/asm-mn10300/dma-mapping.h b/include/asm-mn10300/dma-mapping.h
new file mode 100644
index 0000000..7c882fc
--- /dev/null
+++ b/include/asm-mn10300/dma-mapping.h
@@ -0,0 +1,234 @@
+/* DMA mapping routines for the MN10300 arch
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cache.h>
+#include <asm/io.h>
+
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, int flag);
+
+extern void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h))
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode. The
+ * 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory until
+ * either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+static inline
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+ mn10300_dcache_flush_inv();
+ return virt_to_bus(ptr);
+}
+
+/*
+ * Unmap a single streaming mode DMA translation. The dma_addr and size must
+ * match what was provided for in a previous pci_map_single call. All other
+ * usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * This is the scather-gather version of the above pci_map_single interface.
+ * Here the scatter gather list elements are each tagged with the appropriate
+ * dma address and length. They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of DMA
+ * address/length pairs than there are SG table elements. (for example
+ * via virtual mapping capabilities) The routine returns the number of
+ * addr/length pairs actually used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are the same
+ * here.
+ */
+static inline
+int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+ enum dma_data_direction direction)
+{
+ struct scatterlist *sg;
+ int i;
+
+ BUG_ON(!valid_dma_direction(direction));
+ WARN_ON(nents == 0 || sglist[0].length == 0);
+
+ for_each_sg(sglist, sg, nents, i) {
+ BUG_ON(!sg_page(sg));
+
+ sg->dma_address = sg_phys(sg);
+ }
+
+ mn10300_dcache_flush_inv();
+ return nents;
+}
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+/*
+ * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
+ * to pci_map_single, but takes a struct page instead of a virtual address
+ */
+static inline
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+ return page_to_bus(page) + offset;
+}
+
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Make physical memory consistent for a single streaming mode DMA translation
+ * after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the buffer using
+ * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
+ * function before doing so. At the next point you give the PCI dma address
+ * back to the card, the device again owns the buffer.
+ */
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+
+/*
+ * Make physical memory consistent for a set of streaming mode DMA translations
+ * after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list, same rules
+ * and usage.
+ */
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+static inline
+int dma_mapping_error(dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+/*
+ * Return whether the given PCI device DMA address mask can be supported
+ * properly. For example, if your device can only drive the low 24-bits during
+ * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
+ * function.
+ */
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+ /*
+ * we fall back to GFP_DMA when the mask isn't all 1s, so we can't
+ * guarantee allocations that must be within a tighter range than
+ * GFP_DMA
+ */
+ if (mask < 0x00ffffff)
+ return 0;
+ return 1;
+}
+
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, mask))
+ return -EIO;
+
+ *dev->dma_mask = mask;
+ return 0;
+}
+
+static inline
+int dma_get_cache_alignment(void)
+{
+ return 1 << L1_CACHE_SHIFT;
+}
+
+#define dma_is_consistent(d) (1)
+
+static inline
+void dma_cache_sync(void *vaddr, size_t size,
+ enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+#endif
diff --git a/include/asm-mn10300/dma.h b/include/asm-mn10300/dma.h
new file mode 100644
index 0000000..098df2e
--- /dev/null
+++ b/include/asm-mn10300/dma.h
@@ -0,0 +1,118 @@
+/* MN10300 ISA DMA handlers and definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/system.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */
+#define MAX_DMA_ADDRESS 0xbfffffff
+
+extern spinlock_t dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static inline void enable_dma(unsigned int dmanr)
+{
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+ return 0;
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/include/asm-mn10300/dmactl-regs.h b/include/asm-mn10300/dmactl-regs.h
new file mode 100644
index 0000000..58a199d
--- /dev/null
+++ b/include/asm-mn10300/dmactl-regs.h
@@ -0,0 +1,101 @@
+/* MN10300 on-board DMA controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMACTL_REGS_H
+#define _ASM_DMACTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* DMA registers */
+#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */
+#define DMxCTR_BG 0x0000001f /* transfer request source */
+#define DMxCTR_BG_SOFT 0x00000000 /* - software source */
+#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */
+#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */
+#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */
+#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */
+#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */
+#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */
+#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */
+#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */
+#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */
+#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */
+#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */
+#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */
+#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */
+#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */
+#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */
+#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */
+#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */
+#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */
+#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */
+#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */
+#define DMxCTR_SAM_INCR 0x00000000 /* - increment */
+#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */
+#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */
+#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */
+#define DMxCTR_DAM_INCR 0x00000000 /* - increment */
+#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */
+#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */
+#define DMxCTR_TM 0x00001800 /* DMA transfer mode */
+#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */
+#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */
+#define DMxCTR_UT 0x00006000 /* DMA transfer unit */
+#define DMxCTR_UT_1 0x00000000 /* - 1 byte */
+#define DMxCTR_UT_2 0x00002000 /* - 2 byte */
+#define DMxCTR_UT_4 0x00004000 /* - 4 byte */
+#define DMxCTR_UT_16 0x00006000 /* - 16 byte */
+#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */
+#define DMxCTR_RQM 0x00060000 /* external request input source mode */
+#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */
+#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */
+#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */
+#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */
+#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */
+#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */
+
+#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */
+
+#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */
+
+#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */
+#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */
+
+#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent
+ * size reg */
+#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */
+
+#define DM0IRQ 16 /* DMA channel 0 complete IRQ */
+#define DM1IRQ 17 /* DMA channel 1 complete IRQ */
+#define DM2IRQ 18 /* DMA channel 2 complete IRQ */
+#define DM3IRQ 19 /* DMA channel 3 complete IRQ */
+
+#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */
+#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */
+#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */
+#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_dmactl_regs {
+ u32 ctr;
+ const void *src;
+ void *dst;
+ u32 siz;
+ u32 cyc;
+} __attribute__((aligned(0x100)));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_DMACTL_REGS_H */
diff --git a/include/asm-mn10300/elf.h b/include/asm-mn10300/elf.h
new file mode 100644
index 0000000..256a704
--- /dev/null
+++ b/include/asm-mn10300/elf.h
@@ -0,0 +1,147 @@
+/* MN10300 ELF constant and register definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * AM33 relocations
+ */
+#define R_MN10300_NONE 0 /* No reloc. */
+#define R_MN10300_32 1 /* Direct 32 bit. */
+#define R_MN10300_16 2 /* Direct 16 bit. */
+#define R_MN10300_8 3 /* Direct 8 bit. */
+#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */
+#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */
+#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */
+#define R_MN10300_24 9 /* Direct 24 bit. */
+#define R_MN10300_RELATIVE 23 /* Adjust by program base. */
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_NFPREG 32
+typedef float elf_fpreg_t;
+
+typedef struct {
+ elf_fpreg_t fpregs[ELF_NFPREG];
+ u_int32_t fpcr;
+} elf_fpregset_t;
+
+extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture
+ */
+#define elf_check_arch(x) \
+ (((x)->e_machine == EM_CYGNUS_MN10300) || \
+ ((x)->e_machine == EM_MN10300))
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_MN10300
+
+/*
+ * ELF process initialiser
+ */
+#define ELF_PLAT_INIT(_r, load_addr) \
+do { \
+ struct pt_regs *_ur = current->thread.uregs; \
+ _ur->a3 = 0; _ur->a2 = 0; _ur->d3 = 0; _ur->d2 = 0; \
+ _ur->mcvf = 0; _ur->mcrl = 0; _ur->mcrh = 0; _ur->mdrq = 0; \
+ _ur->e1 = 0; _ur->e0 = 0; _ur->e7 = 0; _ur->e6 = 0; \
+ _ur->e5 = 0; _ur->e4 = 0; _ur->e3 = 0; _ur->e2 = 0; \
+ _ur->lar = 0; _ur->lir = 0; _ur->mdr = 0; \
+ _ur->a1 = 0; _ur->a0 = 0; _ur->d1 = 0; _ur->d0 = 0; \
+} while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader. We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ * - must clear the VMALLOC area
+ */
+#define ELF_ET_DYN_BASE 0x04000000
+
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct user_regs, they are different)
+ * - ELF_CORE_COPY_REGS has been guessed, and may be wrong
+ */
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+do { \
+ pr_reg[0] = regs->a3; \
+ pr_reg[1] = regs->a2; \
+ pr_reg[2] = regs->d3; \
+ pr_reg[3] = regs->d2; \
+ pr_reg[4] = regs->mcvf; \
+ pr_reg[5] = regs->mcrl; \
+ pr_reg[6] = regs->mcrh; \
+ pr_reg[7] = regs->mdrq; \
+ pr_reg[8] = regs->e1; \
+ pr_reg[9] = regs->e0; \
+ pr_reg[10] = regs->e7; \
+ pr_reg[11] = regs->e6; \
+ pr_reg[12] = regs->e5; \
+ pr_reg[13] = regs->e4; \
+ pr_reg[14] = regs->e3; \
+ pr_reg[15] = regs->e2; \
+ pr_reg[16] = regs->sp; \
+ pr_reg[17] = regs->lar; \
+ pr_reg[18] = regs->lir; \
+ pr_reg[19] = regs->mdr; \
+ pr_reg[20] = regs->a1; \
+ pr_reg[21] = regs->a0; \
+ pr_reg[22] = regs->d1; \
+ pr_reg[23] = regs->d0; \
+ pr_reg[24] = regs->orig_d0; \
+ pr_reg[25] = regs->epsw; \
+ pr_reg[26] = regs->pc; \
+} while (0);
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports. This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP (0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization. This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX)
+#endif
+
+#endif /* _ASM_ELF_H */
diff --git a/include/asm-mn10300/emergency-restart.h b/include/asm-mn10300/emergency-restart.h
new file mode 100644
index 0000000..3711bd9
--- /dev/null
+++ b/include/asm-mn10300/emergency-restart.h
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/include/asm-mn10300/errno.h b/include/asm-mn10300/errno.h
new file mode 100644
index 0000000..4c82b50
--- /dev/null
+++ b/include/asm-mn10300/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/include/asm-mn10300/exceptions.h b/include/asm-mn10300/exceptions.h
new file mode 100644
index 0000000..fa16466
--- /dev/null
+++ b/include/asm-mn10300/exceptions.h
@@ -0,0 +1,121 @@
+/* MN10300 Microcontroller core exceptions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_EXCEPTIONS_H
+#define _ASM_EXCEPTIONS_H
+
+#include <linux/linkage.h>
+
+/*
+ * define the breakpoint instruction opcode to use
+ * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can
+ * (can use 0xF7)
+ */
+#define GDBSTUB_BKPT 0xFF
+
+#ifndef __ASSEMBLY__
+
+/*
+ * enumeration of exception codes (as extracted from TBR MSW)
+ */
+enum exception_code {
+ EXCEP_RESET = 0x000000, /* reset */
+
+ /* MMU exceptions */
+ EXCEP_ITLBMISS = 0x000100, /* instruction TLB miss */
+ EXCEP_DTLBMISS = 0x000108, /* data TLB miss */
+ EXCEP_IAERROR = 0x000110, /* instruction address */
+ EXCEP_DAERROR = 0x000118, /* data address */
+
+ /* system exceptions */
+ EXCEP_TRAP = 0x000128, /* program interrupt (PI instruction) */
+ EXCEP_ISTEP = 0x000130, /* single step */
+ EXCEP_IBREAK = 0x000150, /* instruction breakpoint */
+ EXCEP_OBREAK = 0x000158, /* operand breakpoint */
+ EXCEP_PRIVINS = 0x000160, /* privileged instruction execution */
+ EXCEP_UNIMPINS = 0x000168, /* unimplemented instruction execution */
+ EXCEP_UNIMPEXINS = 0x000170, /* unimplemented extended instruction execution */
+ EXCEP_MEMERR = 0x000178, /* illegal memory access */
+ EXCEP_MISALIGN = 0x000180, /* misalignment */
+ EXCEP_BUSERROR = 0x000188, /* bus error */
+ EXCEP_ILLINSACC = 0x000190, /* illegal instruction access */
+ EXCEP_ILLDATACC = 0x000198, /* illegal data access */
+ EXCEP_IOINSACC = 0x0001a0, /* I/O space instruction access */
+ EXCEP_PRIVINSACC = 0x0001a8, /* privileged space instruction access */
+ EXCEP_PRIVDATACC = 0x0001b0, /* privileged space data access */
+ EXCEP_DATINSACC = 0x0001b8, /* data space instruction access */
+ EXCEP_DOUBLE_FAULT = 0x000200, /* double fault */
+
+ /* FPU exceptions */
+ EXCEP_FPU_DISABLED = 0x0001c0, /* FPU disabled */
+ EXCEP_FPU_UNIMPINS = 0x0001c8, /* FPU unimplemented operation */
+ EXCEP_FPU_OPERATION = 0x0001d0, /* FPU operation */
+
+ /* interrupts */
+ EXCEP_WDT = 0x000240, /* watchdog timer overflow */
+ EXCEP_NMI = 0x000248, /* non-maskable interrupt */
+ EXCEP_IRQ_LEVEL0 = 0x000280, /* level 0 maskable interrupt */
+ EXCEP_IRQ_LEVEL1 = 0x000288, /* level 1 maskable interrupt */
+ EXCEP_IRQ_LEVEL2 = 0x000290, /* level 2 maskable interrupt */
+ EXCEP_IRQ_LEVEL3 = 0x000298, /* level 3 maskable interrupt */
+ EXCEP_IRQ_LEVEL4 = 0x0002a0, /* level 4 maskable interrupt */
+ EXCEP_IRQ_LEVEL5 = 0x0002a8, /* level 5 maskable interrupt */
+ EXCEP_IRQ_LEVEL6 = 0x0002b0, /* level 6 maskable interrupt */
+
+ /* system calls */
+ EXCEP_SYSCALL0 = 0x000300, /* system call 0 */
+ EXCEP_SYSCALL1 = 0x000308, /* system call 1 */
+ EXCEP_SYSCALL2 = 0x000310, /* system call 2 */
+ EXCEP_SYSCALL3 = 0x000318, /* system call 3 */
+ EXCEP_SYSCALL4 = 0x000320, /* system call 4 */
+ EXCEP_SYSCALL5 = 0x000328, /* system call 5 */
+ EXCEP_SYSCALL6 = 0x000330, /* system call 6 */
+ EXCEP_SYSCALL7 = 0x000338, /* system call 7 */
+ EXCEP_SYSCALL8 = 0x000340, /* system call 8 */
+ EXCEP_SYSCALL9 = 0x000348, /* system call 9 */
+ EXCEP_SYSCALL10 = 0x000350, /* system call 10 */
+ EXCEP_SYSCALL11 = 0x000358, /* system call 11 */
+ EXCEP_SYSCALL12 = 0x000360, /* system call 12 */
+ EXCEP_SYSCALL13 = 0x000368, /* system call 13 */
+ EXCEP_SYSCALL14 = 0x000370, /* system call 14 */
+ EXCEP_SYSCALL15 = 0x000378, /* system call 15 */
+};
+
+extern void __set_intr_stub(enum exception_code code, void *handler);
+extern void set_intr_stub(enum exception_code code, void *handler);
+extern void set_jtag_stub(enum exception_code code, void *handler);
+
+struct pt_regs;
+
+extern asmlinkage void __common_exception(void);
+extern asmlinkage void itlb_miss(void);
+extern asmlinkage void dtlb_miss(void);
+extern asmlinkage void itlb_aerror(void);
+extern asmlinkage void dtlb_aerror(void);
+extern asmlinkage void raw_bus_error(void);
+extern asmlinkage void double_fault(void);
+extern asmlinkage int system_call(struct pt_regs *);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void nmi(struct pt_regs *, enum exception_code);
+extern asmlinkage void uninitialised_exception(struct pt_regs *,
+ enum exception_code);
+extern asmlinkage void irq_handler(void);
+extern asmlinkage void profile_handler(void);
+extern asmlinkage void nmi_handler(void);
+extern asmlinkage void misalignment(struct pt_regs *, enum exception_code);
+
+extern void die(const char *, struct pt_regs *, enum exception_code)
+ ATTRIB_NORET;
+
+extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_EXCEPTIONS_H */
diff --git a/include/asm-mn10300/fb.h b/include/asm-mn10300/fb.h
new file mode 100644
index 0000000..697b24a
--- /dev/null
+++ b/include/asm-mn10300/fb.h
@@ -0,0 +1,23 @@
+/* MN10300 Frame buffer stuff
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FB_H
+#define _ASM_FB_H
+
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_FB_H */
diff --git a/include/asm-mn10300/fcntl.h b/include/asm-mn10300/fcntl.h
new file mode 100644
index 0000000..46ab12d
--- /dev/null
+++ b/include/asm-mn10300/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/include/asm-mn10300/fpu.h b/include/asm-mn10300/fpu.h
new file mode 100644
index 0000000..64a2b83
--- /dev/null
+++ b/include/asm-mn10300/fpu.h
@@ -0,0 +1,85 @@
+/* MN10300 FPU definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+
+#ifdef __KERNEL__
+
+/* the task that owns the FPU state */
+extern struct task_struct *fpu_state_owner;
+
+#define set_using_fpu(tsk) \
+do { \
+ (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \
+} while (0)
+
+#define clear_using_fpu(tsk) \
+do { \
+ (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \
+} while (0)
+
+#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU)
+
+#define unlazy_fpu(tsk) \
+do { \
+ preempt_disable(); \
+ if (fpu_state_owner == (tsk)) \
+ fpu_save(&tsk->thread.fpu_state); \
+ preempt_enable(); \
+} while (0)
+
+#define exit_fpu() \
+do { \
+ struct task_struct *__tsk = current; \
+ preempt_disable(); \
+ if (fpu_state_owner == __tsk) \
+ fpu_state_owner = NULL; \
+ preempt_enable(); \
+} while (0)
+
+#define flush_fpu() \
+do { \
+ struct task_struct *__tsk = current; \
+ preempt_disable(); \
+ if (fpu_state_owner == __tsk) { \
+ fpu_state_owner = NULL; \
+ __tsk->thread.uregs->epsw &= ~EPSW_FE; \
+ } \
+ preempt_enable(); \
+ clear_using_fpu(__tsk); \
+} while (0)
+
+extern asmlinkage void fpu_init_state(void);
+extern asmlinkage void fpu_kill_state(struct task_struct *);
+extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+
+#ifdef CONFIG_FPU
+extern asmlinkage void fpu_save(struct fpu_state_struct *);
+extern asmlinkage void fpu_restore(struct fpu_state_struct *);
+#else
+#define fpu_save(a)
+#define fpu_restore(a)
+#endif /* CONFIG_FPU */
+
+/*
+ * signal frame handlers
+ */
+extern int fpu_setup_sigcontext(struct fpucontext *buf);
+extern int fpu_restore_sigcontext(struct fpucontext *buf);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_FPU_H */
diff --git a/include/asm-mn10300/frame.inc b/include/asm-mn10300/frame.inc
new file mode 100644
index 0000000..5b1949b
--- /dev/null
+++ b/include/asm-mn10300/frame.inc
@@ -0,0 +1,91 @@
+/* MN10300 Microcontroller core system register definitions -*- asm -*-
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FRAME_INC
+#define _ASM_FRAME_INC
+
+#ifndef __ASSEMBLY__
+#error not for use in C files
+#endif
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#define pi break
+
+#define fp a3
+
+###############################################################################
+#
+# build a stack frame from the registers
+# - the caller has subtracted 4 from SP before coming here
+#
+###############################################################################
+.macro SAVE_ALL
+ add -4,sp # next exception frame ptr save area
+ movm [other],(sp)
+ mov usp,a1
+ mov a1,(sp) # USP in MOVM[other] dummy slot
+ movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
+ mov sp,fp # FRAME pointer in A3
+ add -12,sp # allow for calls to be made
+ mov (__frame),a1
+ mov a1,(REG_NEXT,fp)
+ mov fp,(__frame)
+
+ and ~EPSW_FE,epsw # disable the FPU inside the kernel
+
+ # we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ mov (__current),e2
+#endif
+.endm
+
+###############################################################################
+#
+# restore the registers from a stack frame
+#
+###############################################################################
+.macro RESTORE_ALL
+ # peel back the stack to the calling frame
+ # - this permits execve() to discard extra frames due to kernel syscalls
+ mov (__frame),fp
+ mov fp,sp
+ mov (REG_NEXT,fp),d0 # userspace has regs->next == 0
+ mov d0,(__frame)
+
+#ifndef CONFIG_MN10300_USING_JTAG
+ mov (REG_EPSW,fp),d0
+ btst EPSW_T,d0
+ beq 99f
+
+ or EPSW_NMID,epsw
+ movhu (DCR),d1
+ or 0x0001, d1
+ movhu d1,(DCR)
+
+99:
+#endif
+ movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+
+ # must restore usp even if returning to kernel space,
+ # when CONFIG_PREEMPT is enabled.
+ mov (sp),a1 # USP in MOVM[other] dummy slot
+ mov a1,usp
+
+ movm (sp),[other]
+ add 8,sp
+ rti
+
+.endm
+
+
+#endif /* _ASM_FRAME_INC */
diff --git a/include/asm-mn10300/futex.h b/include/asm-mn10300/futex.h
new file mode 100644
index 0000000..0b74582
--- /dev/null
+++ b/include/asm-mn10300/futex.h
@@ -0,0 +1 @@
+#include <asm-generic/futex.h>
diff --git a/include/asm-mn10300/gdb-stub.h b/include/asm-mn10300/gdb-stub.h
new file mode 100644
index 0000000..e5a6368
--- /dev/null
+++ b/include/asm-mn10300/gdb-stub.h
@@ -0,0 +1,183 @@
+/* MN10300 Kernel GDB stub definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_GDB_STUB_H
+#define _ASM_GDB_STUB_H
+
+#include <asm/exceptions.h>
+
+/*
+ * register ID numbers in GDB remote protocol
+ */
+
+#define GDB_REGID_PC 9
+#define GDB_REGID_FP 7
+#define GDB_REGID_SP 8
+
+/*
+ * virtual stack layout for the GDB exception handler
+ */
+#define NUMREGS 64
+
+#define GDB_FR_D0 (0 * 4)
+#define GDB_FR_D1 (1 * 4)
+#define GDB_FR_D2 (2 * 4)
+#define GDB_FR_D3 (3 * 4)
+#define GDB_FR_A0 (4 * 4)
+#define GDB_FR_A1 (5 * 4)
+#define GDB_FR_A2 (6 * 4)
+#define GDB_FR_A3 (7 * 4)
+
+#define GDB_FR_SP (8 * 4)
+#define GDB_FR_PC (9 * 4)
+#define GDB_FR_MDR (10 * 4)
+#define GDB_FR_EPSW (11 * 4)
+#define GDB_FR_LIR (12 * 4)
+#define GDB_FR_LAR (13 * 4)
+#define GDB_FR_MDRQ (14 * 4)
+
+#define GDB_FR_E0 (15 * 4)
+#define GDB_FR_E1 (16 * 4)
+#define GDB_FR_E2 (17 * 4)
+#define GDB_FR_E3 (18 * 4)
+#define GDB_FR_E4 (19 * 4)
+#define GDB_FR_E5 (20 * 4)
+#define GDB_FR_E6 (21 * 4)
+#define GDB_FR_E7 (22 * 4)
+
+#define GDB_FR_SSP (23 * 4)
+#define GDB_FR_MSP (24 * 4)
+#define GDB_FR_USP (25 * 4)
+#define GDB_FR_MCRH (26 * 4)
+#define GDB_FR_MCRL (27 * 4)
+#define GDB_FR_MCVF (28 * 4)
+
+#define GDB_FR_FPCR (29 * 4)
+#define GDB_FR_DUMMY0 (30 * 4)
+#define GDB_FR_DUMMY1 (31 * 4)
+
+#define GDB_FR_FS0 (32 * 4)
+
+#define GDB_FR_SIZE (NUMREGS * 4)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This is the same as above, but for the high-level
+ * part of the GDB stub.
+ */
+
+struct gdb_regs {
+ /* saved main processor registers */
+ u32 d0, d1, d2, d3, a0, a1, a2, a3;
+ u32 sp, pc, mdr, epsw, lir, lar, mdrq;
+ u32 e0, e1, e2, e3, e4, e5, e6, e7;
+ u32 ssp, msp, usp, mcrh, mcrl, mcvf;
+
+ /* saved floating point registers */
+ u32 fpcr, _dummy0, _dummy1;
+ u32 fs0, fs1, fs2, fs3, fs4, fs5, fs6, fs7;
+ u32 fs8, fs9, fs10, fs11, fs12, fs13, fs14, fs15;
+ u32 fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23;
+ u32 fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31;
+};
+
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+
+extern asmlinkage void gdbstub_init(void);
+extern asmlinkage void gdbstub_exit(int status);
+extern asmlinkage void gdbstub_io_init(void);
+extern asmlinkage void gdbstub_io_set_baud(unsigned baud);
+extern asmlinkage int gdbstub_io_rx_char(unsigned char *_ch, int nonblock);
+extern asmlinkage void gdbstub_io_tx_char(unsigned char ch);
+extern asmlinkage void gdbstub_io_tx_flush(void);
+
+extern asmlinkage void gdbstub_io_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code);
+extern asmlinkage int gdbstub_intercept(struct pt_regs *, enum exception_code);
+extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void __gdbstub_bug_trap(void);
+extern asmlinkage void __gdbstub_pause(void);
+extern asmlinkage void start_kernel(void);
+
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern asmlinkage void gdbstub_purge_cache(void);
+#else
+#define gdbstub_purge_cache() do {} while (0)
+#endif
+
+/* Used to prevent crashes in memory access */
+extern asmlinkage int gdbstub_read_byte(const u8 *, u8 *);
+extern asmlinkage int gdbstub_read_word(const u8 *, u8 *);
+extern asmlinkage int gdbstub_read_dword(const u8 *, u8 *);
+extern asmlinkage int gdbstub_write_byte(u32, u8 *);
+extern asmlinkage int gdbstub_write_word(u32, u8 *);
+extern asmlinkage int gdbstub_write_dword(u32, u8 *);
+
+extern asmlinkage void gdbstub_read_byte_guard(void);
+extern asmlinkage void gdbstub_read_byte_cont(void);
+extern asmlinkage void gdbstub_read_word_guard(void);
+extern asmlinkage void gdbstub_read_word_cont(void);
+extern asmlinkage void gdbstub_read_dword_guard(void);
+extern asmlinkage void gdbstub_read_dword_cont(void);
+extern asmlinkage void gdbstub_write_byte_guard(void);
+extern asmlinkage void gdbstub_write_byte_cont(void);
+extern asmlinkage void gdbstub_write_word_guard(void);
+extern asmlinkage void gdbstub_write_word_cont(void);
+extern asmlinkage void gdbstub_write_dword_guard(void);
+extern asmlinkage void gdbstub_write_dword_cont(void);
+
+extern u8 gdbstub_rx_buffer[PAGE_SIZE];
+extern u32 gdbstub_rx_inp;
+extern u32 gdbstub_rx_outp;
+extern u8 gdbstub_rx_overflow;
+extern u8 gdbstub_busy;
+extern u8 gdbstub_rx_unget;
+
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+extern void gdbstub_printk(const char *fmt, ...)
+ __attribute__((format(printf, 1, 2)));
+#else
+static inline __attribute__((format(printf, 1, 2)))
+void gdbstub_printk(const char *fmt, ...)
+{
+}
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY
+#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_entry(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_IO
+#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_io(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT
+#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_bkpt(FMT, ...) ({ 0; })
+#endif
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_GDB_STUB_H */
diff --git a/include/asm-mn10300/hardirq.h b/include/asm-mn10300/hardirq.h
new file mode 100644
index 0000000..54d9501
--- /dev/null
+++ b/include/asm-mn10300/hardirq.h
@@ -0,0 +1,48 @@
+/* MN10300 Hardware IRQ statistics and management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <asm/exceptions.h>
+
+/* assembly code in softirq.h is sensitive to the offsets of these fields */
+typedef struct {
+ unsigned int __softirq_pending;
+ unsigned long idle_timestamp;
+ unsigned int __nmi_count; /* arch dependent */
+ unsigned int __irq_count; /* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(int irq);
+
+/*
+ * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table
+ * - these should jump to __common_exception in entry.S unless there's a good
+ * reason to do otherwise (see trap_preinit() in traps.c)
+ */
+typedef void (*intr_stub_fnx)(struct pt_regs *regs,
+ enum exception_code intcode);
+
+/*
+ * manipulate pointers in the Exception table (see entry.S)
+ * - these are indexed by decoding the lower 24 bits of the TBR register
+ * - note that the MN103E010 doesn't always trap through the correct vector,
+ * but does always set the TBR correctly
+ */
+extern asmlinkage void set_excp_vector(enum exception_code code,
+ intr_stub_fnx handler);
+
+#endif /* _ASM_HARDIRQ_H */
diff --git a/include/asm-mn10300/highmem.h b/include/asm-mn10300/highmem.h
new file mode 100644
index 0000000..383c0c4
--- /dev/null
+++ b/include/asm-mn10300/highmem.h
@@ -0,0 +1,114 @@
+/* MN10300 Virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* undef for production */
+#undef HIGHMEM_DEBUG
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void __init kmap_init(void);
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE 0xfe000000UL
+#define LAST_PKMAP 1024
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern unsigned long __fastcall kmap_high(struct page *page);
+extern void __fastcall kunmap_high(struct page *page);
+
+static inline unsigned long kmap(struct page *page)
+{
+ if (in_interrupt())
+ BUG();
+ if (page < highmem_start_page)
+ return page_address(page);
+ return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+ if (in_interrupt())
+ BUG();
+ if (page < highmem_start_page)
+ return;
+ kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline unsigned long kmap_atomic(struct page *page, enum km_type type)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr;
+
+ if (page < highmem_start_page)
+ return page_address(page);
+
+ idx = type + KM_TYPE_NR * smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#if HIGHMEM_DEBUG
+ if (!pte_none(*(kmap_pte - idx)))
+ BUG();
+#endif
+ set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
+ __flush_tlb_one(vaddr);
+
+ return vaddr;
+}
+
+static inline void kunmap_atomic(unsigned long vaddr, enum km_type type)
+{
+#if HIGHMEM_DEBUG
+ enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id();
+
+ if (vaddr < FIXADDR_START) /* FIXME */
+ return;
+
+ if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
+ BUG();
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(kmap_pte - idx);
+ __flush_tlb_one(vaddr);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-mn10300/hw_irq.h b/include/asm-mn10300/hw_irq.h
new file mode 100644
index 0000000..7061990
--- /dev/null
+++ b/include/asm-mn10300/hw_irq.h
@@ -0,0 +1,14 @@
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+#endif /* _ASM_HW_IRQ_H */
diff --git a/include/asm-mn10300/ide.h b/include/asm-mn10300/ide.h
new file mode 100644
index 0000000..dc23512
--- /dev/null
+++ b/include/asm-mn10300/ide.h
@@ -0,0 +1,43 @@
+/* MN10300 Arch-specific IDE code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/ide.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IDE_H
+#define _ASM_IDE_H
+
+#ifdef __KERNEL__
+
+#include <asm/intctl-regs.h>
+
+#undef SUPPORT_SLOW_DATA_PORTS
+#define SUPPORT_SLOW_DATA_PORTS 0
+
+#undef SUPPORT_VLB_SYNC
+#define SUPPORT_VLB_SYNC 0
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS 8
+#endif
+
+/*
+ * some bits needed for parts of the IDE subsystem to compile
+ */
+#define __ide_mm_insw(port, addr, n) \
+ insw((unsigned long) (port), (addr), (n))
+#define __ide_mm_insl(port, addr, n) \
+ insl((unsigned long) (port), (addr), (n))
+#define __ide_mm_outsw(port, addr, n) \
+ outsw((unsigned long) (port), (addr), (n))
+#define __ide_mm_outsl(port, addr, n) \
+ outsl((unsigned long) (port), (addr), (n))
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IDE_H */
diff --git a/include/asm-mn10300/intctl-regs.h b/include/asm-mn10300/intctl-regs.h
new file mode 100644
index 0000000..ba544c7
--- /dev/null
+++ b/include/asm-mn10300/intctl-regs.h
@@ -0,0 +1,73 @@
+/* MN10300 On-board interrupt controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_INTCTL_REGS_H
+#define _ASM_INTCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* interrupt controller registers */
+#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */
+
+#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */
+#define IAGR_GN 0x00fc /* group number register
+ * (documentation _has_ to be wrong)
+ */
+
+#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */
+#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
+
+#define SET_XIRQ_TRIGGER(X,Y) \
+do { \
+ u16 x = EXTMD; \
+ x &= ~(3 << ((X) * 2)); \
+ x |= ((Y) & 3) << ((X) * 2); \
+ EXTMD = x; \
+} while (0)
+
+#define XIRQ_TRIGGER_LOWLEVEL 0
+#define XIRQ_TRIGGER_HILEVEL 1
+#define XIRQ_TRIGGER_NEGEDGE 2
+#define XIRQ_TRIGGER_POSEDGE 3
+
+/* non-maskable interrupt control */
+#define NMIIRQ 0
+#define NMICR GxICR(NMIIRQ) /* NMI control register */
+#define NMICR_NMIF 0x0001 /* NMI pin interrupt flag */
+#define NMICR_WDIF 0x0002 /* watchdog timer overflow flag */
+#define NMICR_ABUSERR 0x0008 /* async bus error flag */
+
+/* maskable interrupt control */
+#define GxICR_DETECT 0x0001 /* interrupt detect flag */
+#define GxICR_REQUEST 0x0010 /* interrupt request flag */
+#define GxICR_ENABLE 0x0100 /* interrupt enable flag */
+#define GxICR_LEVEL 0x7000 /* interrupt priority level */
+#define GxICR_LEVEL_0 0x0000 /* - level 0 */
+#define GxICR_LEVEL_1 0x1000 /* - level 1 */
+#define GxICR_LEVEL_2 0x2000 /* - level 2 */
+#define GxICR_LEVEL_3 0x3000 /* - level 3 */
+#define GxICR_LEVEL_4 0x4000 /* - level 4 */
+#define GxICR_LEVEL_5 0x5000 /* - level 5 */
+#define GxICR_LEVEL_6 0x6000 /* - level 6 */
+#define GxICR_LEVEL_SHIFT 12
+
+#ifndef __ASSEMBLY__
+extern void set_intr_level(int irq, u16 level);
+extern void set_intr_postackable(int irq);
+#endif
+
+/* external interrupts */
+#define XIRQxICR(X) GxICR((X)) /* external interrupt control regs */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_INTCTL_REGS_H */
diff --git a/include/asm-mn10300/io.h b/include/asm-mn10300/io.h
new file mode 100644
index 0000000..b8b6dc8
--- /dev/null
+++ b/include/asm-mn10300/io.h
@@ -0,0 +1,299 @@
+/* MN10300 I/O port emulation and memory-mapped I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <asm/cpu-regs.h>
+#include <asm/cacheflush.h>
+
+#define mmiowb() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ */
+static inline u8 readb(const volatile void __iomem *addr)
+{
+ return *(const volatile u8 *) addr;
+}
+
+static inline u16 readw(const volatile void __iomem *addr)
+{
+ return *(const volatile u16 *) addr;
+}
+
+static inline u32 readl(const volatile void __iomem *addr)
+{
+ return *(const volatile u32 *) addr;
+}
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+static inline void writeb(u8 b, volatile void __iomem *addr)
+{
+ *(volatile u8 *) addr = b;
+}
+
+static inline void writew(u16 b, volatile void __iomem *addr)
+{
+ *(volatile u16 *) addr = b;
+}
+
+static inline void writel(u32 b, volatile void __iomem *addr)
+{
+ *(volatile u32 *) addr = b;
+}
+
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+/*****************************************************************************/
+/*
+ * traditional input/output functions
+ */
+static inline u8 inb_local(unsigned long addr)
+{
+ return readb((volatile void __iomem *) addr);
+}
+
+static inline void outb_local(u8 b, unsigned long addr)
+{
+ return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline u8 inb(unsigned long addr)
+{
+ return readb((volatile void __iomem *) addr);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+ return readw((volatile void __iomem *) addr);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+ return readl((volatile void __iomem *) addr);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+ return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+ return writew(b, (volatile void __iomem *) addr);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+ return writel(b, (volatile void __iomem *) addr);
+}
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x, addr) outb((x), (addr))
+#define outw_p(x, addr) outw((x), (addr))
+#define outl_p(x, addr) outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+ if (count) {
+ u8 *buf = buffer;
+ do {
+ u8 x = inb(addr);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+ if (count) {
+ u16 *buf = buffer;
+ do {
+ u16 x = inw(addr);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+ if (count) {
+ u32 *buf = buffer;
+ do {
+ u32 x = inl(addr);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+ if (count) {
+ const u8 *buf = buffer;
+ do {
+ outb(*buf++, addr);
+ } while (--count);
+ }
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+ if (count) {
+ const u16 *buf = buffer;
+ do {
+ outw(*buf++, addr);
+ } while (--count);
+ }
+}
+
+extern void __outsl(unsigned long addr, const void *buffer, int count);
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+ if ((unsigned long) buffer & 0x3)
+ return __outsl(addr, buffer, count);
+
+ if (count) {
+ const u32 *buf = buffer;
+ do {
+ outl(*buf++, addr);
+ } while (--count);
+ }
+}
+
+#define ioread8(addr) readb(addr)
+#define ioread16(addr) readw(addr)
+#define ioread32(addr) readl(addr)
+
+#define iowrite8(v, addr) writeb((v), (addr))
+#define iowrite16(v, addr) writew((v), (addr))
+#define iowrite32(v, addr) writel((v), (addr))
+
+#define ioread8_rep(p, dst, count) \
+ insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+ insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+ insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+ outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+ outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+ outsl((unsigned long) (p), (src), (count))
+
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#ifdef __KERNEL__
+
+#include <linux/vmalloc.h>
+#define __io_virt(x) ((void *) (x))
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+ return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+ return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+static inline void *__ioremap(unsigned long offset, unsigned long size,
+ unsigned long flags)
+{
+ return (void *) offset;
+}
+
+static inline void *ioremap(unsigned long offset, unsigned long size)
+{
+ return (void *) offset;
+}
+
+/*
+ * This one maps high address device memory and turns off caching for that
+ * area. it's useful if some control registers are in such an area and write
+ * combining or read caching is not desirable:
+ */
+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
+{
+ return (void *) (offset | 0x20000000);
+}
+
+static inline void iounmap(void *addr)
+{
+}
+
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+
+#define xlate_dev_kmem_ptr(p) ((void *) (p))
+#define xlate_dev_mem_ptr(p) ((void *) (p))
+
+/*
+ * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff
+ */
+static inline unsigned long virt_to_bus(volatile void *address)
+{
+ return ((unsigned long) address) & ~0x20000000;
+}
+
+static inline void *bus_to_virt(unsigned long address)
+{
+ return (void *) address;
+}
+
+#define page_to_bus page_to_phys
+
+#define memset_io(a, b, c) memset(__io_virt(a), (b), (c))
+#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c))
+#define memcpy_toio(a, b, c) memcpy(__io_virt(a), (b), (c))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IO_H */
diff --git a/include/asm-mn10300/ioctl.h b/include/asm-mn10300/ioctl.h
new file mode 100644
index 0000000..b279fe0
--- /dev/null
+++ b/include/asm-mn10300/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/include/asm-mn10300/ioctls.h b/include/asm-mn10300/ioctls.h
new file mode 100644
index 0000000..dcbfb45
--- /dev/null
+++ b/include/asm-mn10300/ioctls.h
@@ -0,0 +1,88 @@
+#ifndef _ASM_IOCTLS_H
+#define _ASM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T', 0x2A, struct termios2)
+#define TCSETS2 _IOW('T', 0x2B, struct termios2)
+#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
+#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number
+ * (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
+#define FIOQSIZE 0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* _ASM_IOCTLS_H */
diff --git a/include/asm-mn10300/ipc.h b/include/asm-mn10300/ipc.h
new file mode 100644
index 0000000..a46e3d9
--- /dev/null
+++ b/include/asm-mn10300/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-mn10300/ipcbuf.h b/include/asm-mn10300/ipcbuf.h
new file mode 100644
index 0000000..efbbef8
--- /dev/null
+++ b/include/asm-mn10300/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_IPCBUF_H_
+#define _ASM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_IPCBUF_H */
diff --git a/include/asm-mn10300/irq.h b/include/asm-mn10300/irq.h
new file mode 100644
index 0000000..53b3801
--- /dev/null
+++ b/include/asm-mn10300/irq.h
@@ -0,0 +1,32 @@
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/irq.h:
+ * - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <asm/intctl-regs.h>
+#include <asm/reset-regs.h>
+#include <asm/proc/irq.h>
+
+/* this number is used when no interrupt has been assigned */
+#define NO_IRQ INT_MAX
+
+/* hardware irq numbers */
+#define NR_IRQS GxICR_NUM_IRQS
+
+/* external hardware irq numbers */
+#define NR_XIRQS GxICR_NUM_XIRQS
+
+#define irq_canonicalize(IRQ) (IRQ)
+
+#endif /* _ASM_IRQ_H */
diff --git a/include/asm-mn10300/irq_regs.h b/include/asm-mn10300/irq_regs.h
new file mode 100644
index 0000000..a848cd2
--- /dev/null
+++ b/include/asm-mn10300/irq_regs.h
@@ -0,0 +1,24 @@
+/* MN10300 IRQ registers pointer definition
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_REGS_H
+#define _ASM_IRQ_REGS_H
+
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ */
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#ifndef __ASSEMBLY__
+#define get_irq_regs() (__frame)
+#endif
+
+#endif /* _ASM_IRQ_REGS_H */
diff --git a/include/asm-mn10300/kdebug.h b/include/asm-mn10300/kdebug.h
new file mode 100644
index 0000000..0f47e11
--- /dev/null
+++ b/include/asm-mn10300/kdebug.h
@@ -0,0 +1,22 @@
+/* MN10300 In-kernel death knells
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_KDEBUG_H
+#define _ASM_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+ DIE_OOPS = 1,
+ DIE_BREAKPOINT,
+ DIE_GPF,
+};
+
+#endif /* _ASM_KDEBUG_H */
diff --git a/include/asm-mn10300/kmap_types.h b/include/asm-mn10300/kmap_types.h
new file mode 100644
index 0000000..3398f9f
--- /dev/null
+++ b/include/asm-mn10300/kmap_types.h
@@ -0,0 +1,31 @@
+/* MN10300 kmap_atomic() slot IDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif /* _ASM_KMAP_TYPES_H */
diff --git a/include/asm-mn10300/kprobes.h b/include/asm-mn10300/kprobes.h
new file mode 100644
index 0000000..c800b59
--- /dev/null
+++ b/include/asm-mn10300/kprobes.h
@@ -0,0 +1,50 @@
+/* MN10300 Kernel Probes support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+struct kprobe;
+
+typedef unsigned char kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION 0xff
+#define MAX_INSN_SIZE 8
+#define MAX_STACK_SIZE 128
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+ /* copy of original instruction
+ */
+ kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+extern const int kretprobe_blacklist_size;
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data);
+
+#define flush_insn_slot(p) do {} while (0)
+
+extern void arch_remove_kprobe(struct kprobe *p);
+
+#endif /* _ASM_KPROBES_H */
diff --git a/include/asm-mn10300/linkage.h b/include/asm-mn10300/linkage.h
new file mode 100644
index 0000000..29a32e4
--- /dev/null
+++ b/include/asm-mn10300/linkage.h
@@ -0,0 +1,22 @@
+/* MN10300 Linkage and calling-convention overrides
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_LINKAGE_H
+#define _ASM_LINKAGE_H
+
+/* don't override anything */
+#define asmlinkage
+#define FASTCALL(x) x
+#define fastcall
+
+#define __ALIGN .align 4,0xcb
+#define __ALIGN_STR ".align 4,0xcb"
+
+#endif
diff --git a/include/asm-mn10300/local.h b/include/asm-mn10300/local.h
new file mode 100644
index 0000000..c11c530
--- /dev/null
+++ b/include/asm-mn10300/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/include/asm-mn10300/mc146818rtc.h b/include/asm-mn10300/mc146818rtc.h
new file mode 100644
index 0000000..df6bc6e
--- /dev/null
+++ b/include/asm-mn10300/mc146818rtc.h
@@ -0,0 +1 @@
+#include <asm/rtc-regs.h>
diff --git a/include/asm-mn10300/mman.h b/include/asm-mn10300/mman.h
new file mode 100644
index 0000000..b7986b6
--- /dev/null
+++ b/include/asm-mn10300/mman.h
@@ -0,0 +1,28 @@
+/* MN10300 Constants for mmap and co.
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * - Derived from asm-x86/mman.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#endif /* _ASM_MMAN_H */
diff --git a/include/asm-mn10300/mmu.h b/include/asm-mn10300/mmu.h
new file mode 100644
index 0000000..2d2d097
--- /dev/null
+++ b/include/asm-mn10300/mmu.h
@@ -0,0 +1,19 @@
+/* MN10300 Memory management context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-frv/mmu.h
+ */
+
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+/*
+ * MMU context
+ */
+typedef struct {
+ unsigned long tlbpid[NR_CPUS]; /* TLB PID for this process on
+ * each CPU */
+} mm_context_t;
+
+#endif /* _ASM_MMU_H */
diff --git a/include/asm-mn10300/mmu_context.h b/include/asm-mn10300/mmu_context.h
new file mode 100644
index 0000000..a9e2e34
--- /dev/null
+++ b/include/asm-mn10300/mmu_context.h
@@ -0,0 +1,138 @@
+/* MN10300 MMU context management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m32r/mmu_context.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * This implements an algorithm to provide TLB PID mappings to provide
+ * selective access to the TLB for processes, thus reducing the number of TLB
+ * flushes required.
+ *
+ * Note, however, that the M32R algorithm is technically broken as it does not
+ * handle version wrap-around, and could, theoretically, have a problem with a
+ * very long lived program that sleeps long enough for the version number to
+ * wrap all the way around so that its TLB mappings appear valid once again.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm-generic/mm_hooks.h>
+
+#define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL
+#define MMU_CONTEXT_VERSION_MASK 0xffffff00UL
+#define MMU_CONTEXT_FIRST_VERSION 0x00000100UL
+#define MMU_NO_CONTEXT 0x00000000UL
+
+extern unsigned long mmu_context_cache[NR_CPUS];
+#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()])
+
+#define enter_lazy_tlb(mm, tsk) do {} while (0)
+
+#ifdef CONFIG_SMP
+#define cpu_ran_vm(cpu, task) \
+ cpu_set((cpu), (task)->cpu_vm_mask)
+#define cpu_maybe_ran_vm(cpu, task) \
+ cpu_test_and_set((cpu), (task)->cpu_vm_mask)
+#else
+#define cpu_ran_vm(cpu, task) do {} while (0)
+#define cpu_maybe_ran_vm(cpu, task) true
+#endif /* CONFIG_SMP */
+
+/*
+ * allocate an MMU context
+ */
+static inline unsigned long allocate_mmu_context(struct mm_struct *mm)
+{
+ unsigned long *pmc = &mmu_context_cache[smp_processor_id()];
+ unsigned long mc = ++(*pmc);
+
+ if (!(mc & MMU_CONTEXT_TLBPID_MASK)) {
+ /* we exhausted the TLB PIDs of this version on this CPU, so we
+ * flush this CPU's TLB in its entirety and start new cycle */
+ flush_tlb_all();
+
+ /* fix the TLB version if needed (we avoid version #0 so as to
+ * distingush MMU_NO_CONTEXT) */
+ if (!mc)
+ *pmc = mc = MMU_CONTEXT_FIRST_VERSION;
+ }
+ mm_context(mm) = mc;
+ return mc;
+}
+
+/*
+ * get an MMU context if one is needed
+ */
+static inline unsigned long get_mmu_context(struct mm_struct *mm)
+{
+ unsigned long mc = MMU_NO_CONTEXT, cache;
+
+ if (mm) {
+ cache = mmu_context_cache[smp_processor_id()];
+ mc = mm_context(mm);
+
+ /* if we have an old version of the context, replace it */
+ if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK)
+ mc = allocate_mmu_context(mm);
+ }
+ return mc;
+}
+
+/*
+ * initialise the context related info for a new mm_struct instance
+ */
+static inline int init_new_context(struct task_struct *tsk,
+ struct mm_struct *mm)
+{
+ int num_cpus = NR_CPUS, i;
+
+ for (i = 0; i < num_cpus; i++)
+ mm->context.tlbpid[i] = MMU_NO_CONTEXT;
+ return 0;
+}
+
+/*
+ * destroy context related info for an mm_struct that is about to be put to
+ * rest
+ */
+#define destroy_context(mm) do { } while (0)
+
+/*
+ * after we have set current->mm to a new value, this activates the context for
+ * the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, int cpu)
+{
+ PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK;
+}
+
+/*
+ * change between virtual memory sets
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ int cpu = smp_processor_id();
+
+ if (prev != next) {
+ cpu_ran_vm(cpu, next);
+ activate_context(next, cpu);
+ PTBR = (unsigned long) next->pgd;
+ } else if (!cpu_maybe_ran_vm(cpu, next)) {
+ activate_context(next, cpu);
+ }
+}
+
+#define deactivate_mm(tsk, mm) do {} while (0)
+#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
+
+#endif /* _ASM_MMU_CONTEXT_H */
diff --git a/include/asm-mn10300/module.h b/include/asm-mn10300/module.h
new file mode 100644
index 0000000..5d7057d
--- /dev/null
+++ b/include/asm-mn10300/module.h
@@ -0,0 +1,27 @@
+/* MN10300 Arch-specific module definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * Derived from include/asm-i386/module.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+/*
+ * Include the MN10300 architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+
+#endif /* _ASM_MODULE_H */
diff --git a/include/asm-mn10300/msgbuf.h b/include/asm-mn10300/msgbuf.h
new file mode 100644
index 0000000..8b60245
--- /dev/null
+++ b/include/asm-mn10300/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
diff --git a/include/asm-mn10300/mutex.h b/include/asm-mn10300/mutex.h
new file mode 100644
index 0000000..84f5490
--- /dev/null
+++ b/include/asm-mn10300/mutex.h
@@ -0,0 +1,16 @@
+/* MN10300 Mutex fastpath
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+#include <asm-generic/mutex-null.h>
diff --git a/include/asm-mn10300/namei.h b/include/asm-mn10300/namei.h
new file mode 100644
index 0000000..bd9ce94
--- /dev/null
+++ b/include/asm-mn10300/namei.h
@@ -0,0 +1,22 @@
+/* Emulation stuff
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_NAMEI_H
+#define _ASM_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* _ASM_NAMEI_H */
diff --git a/include/asm-mn10300/nmi.h b/include/asm-mn10300/nmi.h
new file mode 100644
index 0000000..f3671cb
--- /dev/null
+++ b/include/asm-mn10300/nmi.h
@@ -0,0 +1,14 @@
+/* MN10300 NMI handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_NMI_H
+#define _ASM_NMI_H
+
+#endif /* _ASM_NMI_H */
diff --git a/include/asm-mn10300/page.h b/include/asm-mn10300/page.h
new file mode 100644
index 0000000..124971b
--- /dev/null
+++ b/include/asm-mn10300/page.h
@@ -0,0 +1,131 @@
+/* MN10300 Page table definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT 12
+
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE - 1))
+#else
+#define PAGE_SIZE +(1 << PAGE_SHIFT) /* unary plus marks an
+ * immediate val not an addr */
+#define PAGE_MASK +(~(PAGE_SIZE - 1))
+#endif
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to, from) memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#define clear_user_page(addr, vaddr, page) clear_page(addr)
+#define copy_user_page(vto, vfrom, vaddr, to) copy_page(vto, vfrom)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define PTE_MASK PAGE_MASK
+#define HPAGE_SHIFT 22
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK (~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+#endif
+
+#define pte_val(x) ((x).pte)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) })
+#define __pgd(x) ((pgd_t) { (x) })
+#define __pgprot(x) ((pgprot_t) { (x) })
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ */
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size) __attribute__((const));
+static inline int get_order(unsigned long size)
+{
+ int order;
+
+ size = (size - 1) >> (PAGE_SHIFT - 1);
+ order = -1;
+ do {
+ size >>= 1;
+ order++;
+ } while (size);
+ return order;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define __PAGE_OFFSET (PAGE_OFFSET_RAW)
+#define PAGE_OFFSET ((unsigned long) __PAGE_OFFSET)
+
+/*
+ * main RAM and kernel working space are coincident at 0x90000000, but to make
+ * life more interesting, there's also an uncached virtual shadow at 0xb0000000
+ * - these mappings are fixed in the MMU
+ */
+#define __pfn_disp (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT)
+
+#define __pa(x) ((unsigned long)(x))
+#define __va(x) ((void *)(unsigned long)(x))
+#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
+#define pfn_to_page(pfn) (mem_map + ((pfn) - __pfn_disp))
+#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + __pfn_disp)
+
+#define pfn_valid(pfn) \
+({ \
+ unsigned long __pfn = (pfn) - __pfn_disp; \
+ __pfn < max_mapnr; \
+})
+
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | \
+ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PAGE_H */
diff --git a/include/asm-mn10300/page_offset.h b/include/asm-mn10300/page_offset.h
new file mode 100644
index 0000000..8eb5b16
--- /dev/null
+++ b/include/asm-mn10300/page_offset.h
@@ -0,0 +1,11 @@
+/* MN10300 Kernel base address
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+#ifndef _ASM_PAGE_OFFSET_H
+#define _ASM_PAGE_OFFSET_H
+
+#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS
+
+#endif
diff --git a/include/asm-mn10300/param.h b/include/asm-mn10300/param.h
new file mode 100644
index 0000000..54b883e
--- /dev/null
+++ b/include/asm-mn10300/param.h
@@ -0,0 +1,34 @@
+/* MN10300 Kernel parameters
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ 1000 /* Internal kernel timer frequency */
+#define USER_HZ 100 /* .. some user interfaces are in
+ * "ticks" */
+#define CLOCKS_PER_SEC (USER_HZ) /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+#define COMMAND_LINE_SIZE 256
+
+#endif /* _ASM_PARAM_H */
diff --git a/include/asm-mn10300/pci.h b/include/asm-mn10300/pci.h
new file mode 100644
index 0000000..205192c
--- /dev/null
+++ b/include/asm-mn10300/pci.h
@@ -0,0 +1,133 @@
+/* MN10300 PCI definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/mm.h> /* for struct page */
+
+#if 0
+#define __pcbdebug(FMT, ADDR, ...) \
+ printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \
+ (u32)(ADDR), ##__VA_ARGS__)
+
+#define __pcidebug(FMT, BUS, DEVFN, WHERE,...) \
+do { \
+ printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n", \
+ (BUS)->number, \
+ PCI_SLOT(DEVFN), \
+ PCI_FUNC(DEVFN), \
+ (u32)(WHERE), ##__VA_ARGS__); \
+} while (0)
+
+#else
+#define __pcbdebug(FMT, ADDR, ...) do {} while (0)
+#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0)
+#endif
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes or
+ * architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+#define pcibios_assign_all_busses() 1
+extern void unit_pci_init(void);
+#else
+#define pcibios_assign_all_busses() 0
+#endif
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO 0xBE000004
+#define PCIBIOS_MIN_MEM 0xB8000000
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq);
+
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory
+ * address space. The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask) (0)
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+/* Return the index of the PCI controller for device. */
+static inline int pci_controller_num(struct pci_dev *dev)
+{
+ return 0;
+}
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state,
+ int write_combine);
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/**
+ * pcibios_resource_to_bus - convert resource to PCI bus address
+ * @dev: device which owns this resource
+ * @region: converted bus-centric region (start,end)
+ * @res: resource to convert
+ *
+ * Convert a resource to a PCI device bus address or bus window.
+ */
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+ struct pci_bus_region *region,
+ struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+ struct resource *res,
+ struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+
+ return root;
+}
+
+#define pcibios_scan_all_fns(a, b) 0
+
+#endif /* _ASM_PCI_H */
diff --git a/include/asm-mn10300/percpu.h b/include/asm-mn10300/percpu.h
new file mode 100644
index 0000000..06a959d
--- /dev/null
+++ b/include/asm-mn10300/percpu.h
@@ -0,0 +1 @@
+#include <asm-generic/percpu.h>
diff --git a/include/asm-mn10300/pgalloc.h b/include/asm-mn10300/pgalloc.h
new file mode 100644
index 0000000..ec057e1
--- /dev/null
+++ b/include/asm-mn10300/pgalloc.h
@@ -0,0 +1,56 @@
+/* MN10300 Page and page table/directory allocation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/threads.h>
+#include <linux/mm.h> /* for struct page */
+
+struct mm_struct;
+struct page;
+
+/* attach a page table to a PMD entry */
+#define pmd_populate_kernel(mm, pmd, pte) \
+ set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE))
+
+static inline
+void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
+{
+ set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *, pgd_t *);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+ __free_page(pte);
+}
+
+
+#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/include/asm-mn10300/pgtable.h b/include/asm-mn10300/pgtable.h
new file mode 100644
index 0000000..375c494
--- /dev/null
+++ b/include/asm-mn10300/pgtable.h
@@ -0,0 +1,489 @@
+/* MN10300 Page table manipulators and constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * The Linux memory management assumes a three-level page table setup. On
+ * the i386, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * i386 mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the i386 page table tree for the purposes of the MN10300 TLB handler
+ * functions.
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <asm/cpu-regs.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <linux/threads.h>
+
+#include <asm/bitops.h>
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+extern unsigned long empty_zero_page[1024];
+extern spinlock_t pgd_lock;
+extern struct page *pgd_list;
+
+extern void pmd_ctor(void *, struct kmem_cache *, unsigned long);
+extern void pgtable_cache_init(void);
+extern void paging_init(void);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The Linux mn10300 paging architecture only implements both the traditional
+ * 2-level page tables
+ */
+#define PGDIR_SHIFT 22
+#define PTRS_PER_PGD 1024
+#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */
+#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */
+#define PTRS_PER_PTE 1024
+
+#define PGD_SIZE PAGE_SIZE
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE - 1))
+
+#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS 0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT 22
+#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS (1024 - BOOT_USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+#endif
+
+/*
+ * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM
+ * area has to be in the lower half of the virtual address range (the upper
+ * half is not translated through the TLB).
+ *
+ * So in this case, the vmalloc area goes at the bottom of the address map
+ * (leaving a hole at the very bottom to catch addressing errors), and
+ * userspace starts immediately above.
+ *
+ * The vmalloc() routines also leaves a hole of 4kB between each vmalloced
+ * area to catch addressing errors.
+ */
+#define VMALLOC_OFFSET (8 * 1024 * 1024)
+#define VMALLOC_START (0x70000000)
+#define VMALLOC_END (0x7C000000)
+
+#ifndef __ASSEMBLY__
+extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
+#endif
+
+/* IPTEL/DPTEL bit assignments */
+#define _PAGE_BIT_VALID xPTEL_V_BIT
+#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_CACHE xPTEL_C_BIT
+#define _PAGE_BIT_PRESENT xPTEL_PV_BIT
+#define _PAGE_BIT_DIRTY xPTEL_D_BIT
+#define _PAGE_BIT_GLOBAL xPTEL_G_BIT
+
+#define _PAGE_VALID xPTEL_V
+#define _PAGE_ACCESSED xPTEL_UNUSED1
+#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */
+#define _PAGE_CACHE xPTEL_C
+#define _PAGE_PRESENT xPTEL_PV
+#define _PAGE_DIRTY xPTEL_D
+#define _PAGE_PROT xPTEL_PR
+#define _PAGE_PROT_RKNU xPTEL_PR_ROK
+#define _PAGE_PROT_WKNU xPTEL_PR_RWK
+#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU
+#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU
+#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU
+#define _PAGE_GLOBAL xPTEL_G
+#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */
+
+#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */
+
+#define __PAGE_PROT_UWAUX 0x040
+#define __PAGE_PROT_USER 0x080
+#define __PAGE_PROT_WRITE 0x100
+
+#define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID)
+#define _PAGE_PROTNONE 0x000 /* If not present */
+
+#ifndef __ASSEMBLY__
+
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#define _PAGE_TABLE (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define __PAGE_NONE (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_SHARED (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_COPY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+
+#define PAGE_NONE __pgprot(__PAGE_NONE | _PAGE_NX)
+#define PAGE_SHARED_NOEXEC __pgprot(__PAGE_SHARED | _PAGE_NX)
+#define PAGE_COPY_NOEXEC __pgprot(__PAGE_COPY | _PAGE_NX)
+#define PAGE_READONLY_NOEXEC __pgprot(__PAGE_READONLY | _PAGE_NX)
+#define PAGE_SHARED_EXEC __pgprot(__PAGE_SHARED)
+#define PAGE_COPY_EXEC __pgprot(__PAGE_COPY)
+#define PAGE_READONLY_EXEC __pgprot(__PAGE_READONLY)
+#define PAGE_COPY PAGE_COPY_NOEXEC
+#define PAGE_READONLY PAGE_READONLY_NOEXEC
+#define PAGE_SHARED PAGE_SHARED_EXEC
+
+#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+
+#define __PAGE_KERNEL (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX)
+#define __PAGE_KERNEL_EXEC (__PAGE_KERNEL & ~_PAGE_NX)
+#define __PAGE_KERNEL_RO (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define PAGE_KERNEL __pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)
+
+/*
+ * Whilst the MN10300 can do page protection for execute (given separate data
+ * and insn TLBs), we are not supporting it at the moment. Write permission,
+ * however, always implies read permission (but not execute permission).
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY_NOEXEC
+#define __P010 PAGE_COPY_NOEXEC
+#define __P011 PAGE_COPY_NOEXEC
+#define __P100 PAGE_READONLY_EXEC
+#define __P101 PAGE_READONLY_EXEC
+#define __P110 PAGE_COPY_EXEC
+#define __P111 PAGE_COPY_EXEC
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY_NOEXEC
+#define __S010 PAGE_SHARED_NOEXEC
+#define __S011 PAGE_SHARED_NOEXEC
+#define __S100 PAGE_READONLY_EXEC
+#define __S101 PAGE_READONLY_EXEC
+#define __S110 PAGE_SHARED_EXEC
+#define __S111 PAGE_SHARED_EXEC
+
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'verify_area(VERIFY_WRITE,..)'
+ */
+#undef TEST_VERIFY_AREA
+
+#define pte_present(x) (pte_val(x) & _PAGE_VALID)
+#define pte_clear(mm, addr, xp) \
+do { \
+ set_pte_at((mm), (addr), (xp), __pte(0)); \
+} while (0)
+
+#define pmd_none(x) (!pmd_val(x))
+#define pmd_present(x) (!pmd_none(x))
+#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x) 0
+
+
+#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_read(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & __PAGE_PROT_WRITE; }
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+ pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte;
+}
+static inline pte_t pte_exprotect(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_NX; return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) { pte_val(pte) &= ~_PAGE_NX; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+ pte_val(pte) |= __PAGE_PROT_USER;
+ if (pte_write(pte))
+ pte_val(pte) |= __PAGE_PROT_UWAUX;
+ return pte;
+}
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+ pte_val(pte) |= __PAGE_PROT_WRITE;
+ if (pte_val(pte) & __PAGE_PROT_USER)
+ pte_val(pte) |= __PAGE_PROT_UWAUX;
+ return pte;
+}
+
+#define pte_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
+ __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+ __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_clear(xp) do { } while (0)
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified. Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte((ptep), (pteval))
+#define set_pte_atomic(pteptr, pteval) set_pte((pteptr), (pteval))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define ptep_get_and_clear(mm, addr, ptep) \
+ __pte(xchg(&(ptep)->pte, 0))
+#define pte_same(a, b) (pte_val(a) == pte_val(b))
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+#define pte_none(x) (!pte_val(x))
+#define pte_pfn(x) ((unsigned long) (pte_val(x) >> PAGE_SHIFT))
+#define __pfn_addr(pfn) ((pfn) << PAGE_SHIFT)
+#define pfn_pte(pfn, prot) __pte(__pfn_addr(pfn) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) __pmd(__pfn_addr(pfn) | pgprot_val(prot))
+
+/*
+ * All present user pages are user-executable:
+ */
+static inline int pte_exec(pte_t pte)
+{
+ return pte_user(pte);
+}
+
+/*
+ * All present pages are kernel-executable:
+ */
+static inline int pte_exec_kernel(pte_t pte)
+{
+ return 1;
+}
+
+/*
+ * Bits 0 and 1 are taken, split up the 29 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS 29
+
+#define pte_to_pgoff(pte) (pte_val(pte) >> 2)
+#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x) (((x).val >> 2) & 0x3f)
+#define __swp_offset(x) ((x).val >> 8)
+#define __swp_entry(type, offset) \
+ ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) __pte((x).val)
+
+static inline
+int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep)
+{
+ if (!pte_dirty(*ptep))
+ return 0;
+ return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+static inline
+int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep)
+{
+ if (!pte_young(*ptep))
+ return 0;
+ return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte);
+}
+
+static inline
+void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX);
+}
+
+static inline void ptep_mkdirty(pte_t *ptep)
+{
+ set_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable". On processors which
+ * do not support it, this is a no-op.
+ */
+#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE)
+
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry) \
+ ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) &= _PAGE_CHG_MASK;
+ pte_val(pte) |= pgprot_val(newprot);
+ return pte;
+}
+
+#define page_pte(page) page_pte_prot((page), __pgprot(0))
+
+#define pmd_page_kernel(pmd) \
+ ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+
+#define pmd_large(pmd) \
+ ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \
+ (_PAGE_PSE | _PAGE_PRESENT))
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address) \
+ (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(dir, address) \
+ ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address))
+
+/*
+ * Make a given kernel text page executable/non-executable.
+ * Returns the previous executability setting of that page (which
+ * is used to restore the previous state). Used by the SMP bootup code.
+ * NOTE: this is an __init function for security reasons.
+ */
+static inline int set_kernel_exec(unsigned long vaddr, int enable)
+{
+ return 0;
+}
+
+#define pte_offset_map(dir, address) \
+ ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte) do {} while (0)
+#define pte_unmap_nested(pte) do {} while (0)
+
+/*
+ * The MN10300 has external MMU info in the form of a TLB: this is adapted from
+ * the kernel page tables containing the necessary information by tlb-mn10300.S
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long address, pte_t pte);
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr) (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range((vma), (vaddr), (pfn), (size), (prot))
+
+#define MK_IOSPACE_PFN(space, pfn) (pfn)
+#define GET_IOSPACE(pfn) 0
+#define GET_PFN(pfn) (pfn)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTEP_MKDIRTY
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/include/asm-mn10300/pio-regs.h b/include/asm-mn10300/pio-regs.h
new file mode 100644
index 0000000..96bc8182
--- /dev/null
+++ b/include/asm-mn10300/pio-regs.h
@@ -0,0 +1,233 @@
+/* MN10300 On-board I/O port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PIO_REGS_H
+#define _ASM_PIO_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* I/O port 0 */
+#define P0MD __SYSREG(0xdb000000, u16) /* mode reg */
+#define P0MD_0 0x0003 /* mask */
+#define P0MD_0_IN 0x0000 /* input mode */
+#define P0MD_0_OUT 0x0001 /* output mode */
+#define P0MD_0_TM0IO 0x0002 /* timer 0 I/O mode */
+#define P0MD_0_EYECLK 0x0003 /* test signal output (clock) */
+#define P0MD_1 0x000c
+#define P0MD_1_IN 0x0000
+#define P0MD_1_OUT 0x0004
+#define P0MD_1_TM1IO 0x0008 /* timer 1 I/O mode */
+#define P0MD_1_EYED 0x000c /* test signal output (data) */
+#define P0MD_2 0x0030
+#define P0MD_2_IN 0x0000
+#define P0MD_2_OUT 0x0010
+#define P0MD_2_TM2IO 0x0020 /* timer 2 I/O mode */
+#define P0MD_3 0x00c0
+#define P0MD_3_IN 0x0000
+#define P0MD_3_OUT 0x0040
+#define P0MD_3_TM3IO 0x0080 /* timer 3 I/O mode */
+#define P0MD_4 0x0300
+#define P0MD_4_IN 0x0000
+#define P0MD_4_OUT 0x0100
+#define P0MD_4_TM4IO 0x0200 /* timer 4 I/O mode */
+#define P0MD_4_XCTS 0x0300 /* XCTS input for serial port 2 */
+#define P0MD_5 0x0c00
+#define P0MD_5_IN 0x0000
+#define P0MD_5_OUT 0x0400
+#define P0MD_5_TM5IO 0x0800 /* timer 5 I/O mode */
+#define P0MD_6 0x3000
+#define P0MD_6_IN 0x0000
+#define P0MD_6_OUT 0x1000
+#define P0MD_6_TM6IOA 0x2000 /* timer 6 I/O mode A */
+#define P0MD_7 0xc000
+#define P0MD_7_IN 0x0000
+#define P0MD_7_OUT 0x4000
+#define P0MD_7_TM6IOB 0x8000 /* timer 6 I/O mode B */
+
+#define P0IN __SYSREG(0xdb000004, u8) /* in reg */
+#define P0OUT __SYSREG(0xdb000008, u8) /* out reg */
+
+#define P0TMIO __SYSREG(0xdb00000c, u8) /* TM pin I/O control reg */
+#define P0TMIO_TM0_IN 0x00
+#define P0TMIO_TM0_OUT 0x01
+#define P0TMIO_TM1_IN 0x00
+#define P0TMIO_TM1_OUT 0x02
+#define P0TMIO_TM2_IN 0x00
+#define P0TMIO_TM2_OUT 0x04
+#define P0TMIO_TM3_IN 0x00
+#define P0TMIO_TM3_OUT 0x08
+#define P0TMIO_TM4_IN 0x00
+#define P0TMIO_TM4_OUT 0x10
+#define P0TMIO_TM5_IN 0x00
+#define P0TMIO_TM5_OUT 0x20
+#define P0TMIO_TM6A_IN 0x00
+#define P0TMIO_TM6A_OUT 0x40
+#define P0TMIO_TM6B_IN 0x00
+#define P0TMIO_TM6B_OUT 0x80
+
+/* I/O port 1 */
+#define P1MD __SYSREG(0xdb000100, u16) /* mode reg */
+#define P1MD_0 0x0003 /* mask */
+#define P1MD_0_IN 0x0000 /* input mode */
+#define P1MD_0_OUT 0x0001 /* output mode */
+#define P1MD_0_TM7IO 0x0002 /* timer 7 I/O mode */
+#define P1MD_0_ADTRG 0x0003 /* A/D converter trigger mode */
+#define P1MD_1 0x000c
+#define P1MD_1_IN 0x0000
+#define P1MD_1_OUT 0x0004
+#define P1MD_1_TM8IO 0x0008 /* timer 8 I/O mode */
+#define P1MD_1_XDMR0 0x000c /* DMA request input 0 mode */
+#define P1MD_2 0x0030
+#define P1MD_2_IN 0x0000
+#define P1MD_2_OUT 0x0010
+#define P1MD_2_TM9IO 0x0020 /* timer 9 I/O mode */
+#define P1MD_2_XDMR1 0x0030 /* DMA request input 1 mode */
+#define P1MD_3 0x00c0
+#define P1MD_3_IN 0x0000
+#define P1MD_3_OUT 0x0040
+#define P1MD_3_TM10IO 0x0080 /* timer 10 I/O mode */
+#define P1MD_3_FRQS0 0x00c0 /* CPU clock multiplier setting input 0 mode */
+#define P1MD_4 0x0300
+#define P1MD_4_IN 0x0000
+#define P1MD_4_OUT 0x0100
+#define P1MD_4_TM11IO 0x0200 /* timer 11 I/O mode */
+#define P1MD_4_FRQS1 0x0300 /* CPU clock multiplier setting input 1 mode */
+
+#define P1IN __SYSREG(0xdb000104, u8) /* in reg */
+#define P1OUT __SYSREG(0xdb000108, u8) /* out reg */
+#define P1TMIO __SYSREG(0xdb00010c, u8) /* TM pin I/O control reg */
+#define P1TMIO_TM11_IN 0x00
+#define P1TMIO_TM11_OUT 0x01
+#define P1TMIO_TM10_IN 0x00
+#define P1TMIO_TM10_OUT 0x02
+#define P1TMIO_TM9_IN 0x00
+#define P1TMIO_TM9_OUT 0x04
+#define P1TMIO_TM8_IN 0x00
+#define P1TMIO_TM8_OUT 0x08
+#define P1TMIO_TM7_IN 0x00
+#define P1TMIO_TM7_OUT 0x10
+
+/* I/O port 2 */
+#define P2MD __SYSREG(0xdb000200, u16) /* mode reg */
+#define P2MD_0 0x0003 /* mask */
+#define P2MD_0_IN 0x0000 /* input mode */
+#define P2MD_0_OUT 0x0001 /* output mode */
+#define P2MD_0_BOOTBW 0x0003 /* boot bus width selector mode */
+#define P2MD_1 0x000c
+#define P2MD_1_IN 0x0000
+#define P2MD_1_OUT 0x0004
+#define P2MD_1_BOOTSEL 0x000c /* boot device selector mode */
+#define P2MD_2 0x0030
+#define P2MD_2_IN 0x0000
+#define P2MD_2_OUT 0x0010
+#define P2MD_3 0x00c0
+#define P2MD_3_IN 0x0000
+#define P2MD_3_OUT 0x0040
+#define P2MD_3_CKIO 0x00c0 /* mode */
+#define P2MD_4 0x0300
+#define P2MD_4_IN 0x0000
+#define P2MD_4_OUT 0x0100
+#define P2MD_4_CMOD 0x0300 /* mode */
+
+#define P2IN __SYSREG(0xdb000204, u8) /* in reg */
+#define P2OUT __SYSREG(0xdb000208, u8) /* out reg */
+#define P2TMIO __SYSREG(0xdb00020c, u8) /* TM pin I/O control reg */
+
+/* I/O port 3 */
+#define P3MD __SYSREG(0xdb000300, u16) /* mode reg */
+#define P3MD_0 0x0003 /* mask */
+#define P3MD_0_IN 0x0000 /* input mode */
+#define P3MD_0_OUT 0x0001 /* output mode */
+#define P3MD_0_AFRXD 0x0002 /* AFR interface mode */
+#define P3MD_1 0x000c
+#define P3MD_1_IN 0x0000
+#define P3MD_1_OUT 0x0004
+#define P3MD_1_AFTXD 0x0008 /* AFR interface mode */
+#define P3MD_2 0x0030
+#define P3MD_2_IN 0x0000
+#define P3MD_2_OUT 0x0010
+#define P3MD_2_AFSCLK 0x0020 /* AFR interface mode */
+#define P3MD_3 0x00c0
+#define P3MD_3_IN 0x0000
+#define P3MD_3_OUT 0x0040
+#define P3MD_3_AFFS 0x0080 /* AFR interface mode */
+#define P3MD_4 0x0300
+#define P3MD_4_IN 0x0000
+#define P3MD_4_OUT 0x0100
+#define P3MD_4_AFEHC 0x0200 /* AFR interface mode */
+
+#define P3IN __SYSREG(0xdb000304, u8) /* in reg */
+#define P3OUT __SYSREG(0xdb000308, u8) /* out reg */
+
+/* I/O port 4 */
+#define P4MD __SYSREG(0xdb000400, u16) /* mode reg */
+#define P4MD_0 0x0003 /* mask */
+#define P4MD_0_IN 0x0000 /* input mode */
+#define P4MD_0_OUT 0x0001 /* output mode */
+#define P4MD_0_SCL0 0x0002 /* I2C/serial mode */
+#define P4MD_1 0x000c
+#define P4MD_1_IN 0x0000
+#define P4MD_1_OUT 0x0004
+#define P4MD_1_SDA0 0x0008
+#define P4MD_2 0x0030
+#define P4MD_2_IN 0x0000
+#define P4MD_2_OUT 0x0010
+#define P4MD_2_SCL1 0x0020
+#define P4MD_3 0x00c0
+#define P4MD_3_IN 0x0000
+#define P4MD_3_OUT 0x0040
+#define P4MD_3_SDA1 0x0080
+#define P4MD_4 0x0300
+#define P4MD_4_IN 0x0000
+#define P4MD_4_OUT 0x0100
+#define P4MD_4_SBO0 0x0200
+#define P4MD_5 0x0c00
+#define P4MD_5_IN 0x0000
+#define P4MD_5_OUT 0x0400
+#define P4MD_5_SBO1 0x0800
+#define P4MD_6 0x3000
+#define P4MD_6_IN 0x0000
+#define P4MD_6_OUT 0x1000
+#define P4MD_6_SBT0 0x2000
+#define P4MD_7 0xc000
+#define P4MD_7_IN 0x0000
+#define P4MD_7_OUT 0x4000
+#define P4MD_7_SBT1 0x8000
+
+#define P4IN __SYSREG(0xdb000404, u8) /* in reg */
+#define P4OUT __SYSREG(0xdb000408, u8) /* out reg */
+
+/* I/O port 5 */
+#define P5MD __SYSREG(0xdb000500, u16) /* mode reg */
+#define P5MD_0 0x0003 /* mask */
+#define P5MD_0_IN 0x0000 /* input mode */
+#define P5MD_0_OUT 0x0001 /* output mode */
+#define P5MD_0_IRTXD 0x0002 /* IrDA mode */
+#define P5MD_0_SOUT 0x0004 /* serial mode */
+#define P5MD_1 0x000c
+#define P5MD_1_IN 0x0000
+#define P5MD_1_OUT 0x0004
+#define P5MD_1_IRRXDS 0x0008 /* IrDA mode */
+#define P5MD_1_SIN 0x000c /* serial mode */
+#define P5MD_2 0x0030
+#define P5MD_2_IN 0x0000
+#define P5MD_2_OUT 0x0010
+#define P5MD_2_IRRXDF 0x0020 /* IrDA mode */
+
+#define P5IN __SYSREG(0xdb000504, u8) /* in reg */
+#define P5OUT __SYSREG(0xdb000508, u8) /* out reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PIO_REGS_H */
diff --git a/include/asm-mn10300/poll.h b/include/asm-mn10300/poll.h
new file mode 100644
index 0000000..c98509d
--- /dev/null
+++ b/include/asm-mn10300/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/include/asm-mn10300/posix_types.h b/include/asm-mn10300/posix_types.h
new file mode 100644
index 0000000..077567c
--- /dev/null
+++ b/include/asm-mn10300/posix_types.h
@@ -0,0 +1,132 @@
+/* MN10300 POSIX types
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *__p)
+{
+ unsigned long *__tmp = __p->fds_bits;
+ int __i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 16:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ __tmp[ 8] = 0; __tmp[ 9] = 0;
+ __tmp[10] = 0; __tmp[11] = 0;
+ __tmp[12] = 0; __tmp[13] = 0;
+ __tmp[14] = 0; __tmp[15] = 0;
+ return;
+
+ case 8:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ return;
+
+ case 4:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ return;
+ }
+ }
+ __i = __FDSET_LONGS;
+ while (__i) {
+ __i--;
+ *__tmp = 0;
+ __tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* _ASM_POSIX_TYPES_H */
diff --git a/include/asm-mn10300/proc-mn103e010/cache.h b/include/asm-mn10300/proc-mn103e010/cache.h
new file mode 100644
index 0000000..bdc1f9a
--- /dev/null
+++ b/include/asm-mn10300/proc-mn103e010/cache.h
@@ -0,0 +1,33 @@
+/* MN103E010 Cache specification
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CACHE_H
+#define _ASM_PROC_CACHE_H
+
+/* L1 cache */
+
+#define L1_CACHE_NWAYS 4 /* number of ways in caches */
+#define L1_CACHE_NENTRIES 256 /* number of entries in each way */
+#define L1_CACHE_BYTES 16 /* bytes per entry */
+#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */
+#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */
+
+#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */
+#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */
+#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */
+#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */
+
+/*
+ * specification of the interval between interrupt checking intervals whilst
+ * managing the cache with the interrupts disabled
+ */
+#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4
+
+#endif /* _ASM_PROC_CACHE_H */
diff --git a/include/asm-mn10300/proc-mn103e010/clock.h b/include/asm-mn10300/proc-mn103e010/clock.h
new file mode 100644
index 0000000..caf9983
--- /dev/null
+++ b/include/asm-mn10300/proc-mn103e010/clock.h
@@ -0,0 +1,18 @@
+/* MN103E010-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CLOCK_H
+#define _ASM_PROC_CLOCK_H
+
+#include <asm/unit/clock.h>
+
+#define MN10300_WDCLK MN10300_IOCLK
+
+#endif /* _ASM_PROC_CLOCK_H */
diff --git a/include/asm-mn10300/proc-mn103e010/irq.h b/include/asm-mn10300/proc-mn103e010/irq.h
new file mode 100644
index 0000000..aa6ee8f
--- /dev/null
+++ b/include/asm-mn10300/proc-mn103e010/irq.h
@@ -0,0 +1,34 @@
+/* MN103E010 On-board interrupt controller numbers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_IRQ_H
+#define _ASM_PROC_IRQ_H
+
+#ifdef __KERNEL__
+
+#define GxICR_NUM_IRQS 42
+
+#define GxICR_NUM_XIRQS 8
+
+#define XIRQ0 34
+#define XIRQ1 35
+#define XIRQ2 36
+#define XIRQ3 37
+#define XIRQ4 38
+#define XIRQ5 39
+#define XIRQ6 40
+#define XIRQ7 41
+
+#define XIRQ2IRQ(num) (XIRQ0 + num)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PROC_IRQ_H */
diff --git a/include/asm-mn10300/proc-mn103e010/proc.h b/include/asm-mn10300/proc-mn103e010/proc.h
new file mode 100644
index 0000000..22a2b93
--- /dev/null
+++ b/include/asm-mn10300/proc-mn103e010/proc.h
@@ -0,0 +1,18 @@
+/* MN103E010 Processor description
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_PROC_H
+#define _ASM_PROC_PROC_H
+
+#define PROCESSOR_VENDOR_NAME "Matsushita"
+#define PROCESSOR_MODEL_NAME "mn103e010"
+
+#endif /* _ASM_PROC_PROC_H */
diff --git a/include/asm-mn10300/processor.h b/include/asm-mn10300/processor.h
new file mode 100644
index 0000000..f1b081f
--- /dev/null
+++ b/include/asm-mn10300/processor.h
@@ -0,0 +1,186 @@
+/* MN10300 Processor specifics
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/cpu-regs.h>
+#include <linux/threads.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() \
+({ \
+ void *__pc; \
+ asm("mov pc,%0" : "=a"(__pc)); \
+ __pc; \
+})
+
+extern void show_registers(struct pt_regs *regs);
+
+/*
+ * CPU type and hardware bug flags. Kept separately for each CPU.
+ * Members of this structure are referenced in head.S, so think twice
+ * before touching them. [mj]
+ */
+
+struct mn10300_cpuinfo {
+ int type;
+ unsigned long loops_per_sec;
+ char hard_math;
+ unsigned long *pgd_quick;
+ unsigned long *pte_quick;
+ unsigned long pgtable_cache_sz;
+};
+
+extern struct mn10300_cpuinfo boot_cpu_data;
+
+#define cpu_data &boot_cpu_data
+#define current_cpu_data boot_cpu_data
+
+extern void identify_cpu(struct mn10300_cpuinfo *);
+extern void print_cpu_info(struct mn10300_cpuinfo *);
+extern void dodgy_tsc(void);
+#define cpu_relax() do {} while (0)
+
+/*
+ * User space process size: 1.75GB (default).
+ */
+#define TASK_SIZE 0x70000000
+
+/*
+ * Where to put the userspace stack by default
+ */
+#define STACK_TOP 0x70000000
+#define STACK_TOP_MAX STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE 0x30000000
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+struct fpu_state_struct {
+ unsigned long fs[32]; /* fpu registers */
+ unsigned long fpcr; /* fpu control register */
+};
+
+struct thread_struct {
+ struct pt_regs *uregs; /* userspace register frame */
+ unsigned long pc; /* kernel PC */
+ unsigned long sp; /* kernel SP */
+ unsigned long a3; /* kernel FP */
+ unsigned long wchan;
+ unsigned long usp;
+ struct pt_regs *__frame;
+ unsigned long fpu_flags;
+#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */
+ struct fpu_state_struct fpu_state;
+};
+
+#define INIT_THREAD \
+{ \
+ .uregs = init_uregs, \
+ .pc = 0, \
+ .sp = 0, \
+ .a3 = 0, \
+ .wchan = 0, \
+ .__frame = NULL, \
+}
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \
+ NULL, NULL }
+
+/*
+ * do necessary setup to start up a newly executed thread
+ * - need to discard the frame stacked by the kernel thread invoking the execve
+ * syscall (see RESTORE_ALL macro)
+ */
+#define start_thread(regs, new_pc, new_sp) do { \
+ set_fs(USER_DS); \
+ __frame = current->thread.uregs; \
+ __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \
+ __frame->pc = new_pc; \
+ __frame->sp = new_sp; \
+} while (0)
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define task_pt_regs(task) \
+({ \
+ struct pt_regs *__regs__; \
+ __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \
+ __regs__ - 1; \
+})
+
+#define KSTK_EIP(task) (task_pt_regs(task)->pc)
+#define KSTK_ESP(task) (task_pt_regs(task)->sp)
+
+#define KSTK_TOP(info) \
+({ \
+ (unsigned long)(info) + THREAD_SIZE; \
+})
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+
+static inline void prefetch(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+ asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+static inline void prefetchw(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+ asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+#endif /* _ASM_PROCESSOR_H */
diff --git a/include/asm-mn10300/ptrace.h b/include/asm-mn10300/ptrace.h
new file mode 100644
index 0000000..b368468
--- /dev/null
+++ b/include/asm-mn10300/ptrace.h
@@ -0,0 +1,99 @@
+/* MN10300 Exception frame layout and ptrace constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#define PT_A3 0
+#define PT_A2 1
+#define PT_D3 2
+#define PT_D2 3
+#define PT_MCVF 4
+#define PT_MCRL 5
+#define PT_MCRH 6
+#define PT_MDRQ 7
+#define PT_E1 8
+#define PT_E0 9
+#define PT_E7 10
+#define PT_E6 11
+#define PT_E5 12
+#define PT_E4 13
+#define PT_E3 14
+#define PT_E2 15
+#define PT_SP 16
+#define PT_LAR 17
+#define PT_LIR 18
+#define PT_MDR 19
+#define PT_A1 20
+#define PT_A0 21
+#define PT_D1 22
+#define PT_D0 23
+#define PT_ORIG_D0 24
+#define PT_EPSW 25
+#define PT_PC 26
+#define NR_PTREGS 27
+
+#ifndef __ASSEMBLY__
+/*
+ * This defines the way registers are stored in the event of an exception
+ * - the strange order is due to the MOVM instruction
+ */
+struct pt_regs {
+ unsigned long a3; /* syscall arg 3 */
+ unsigned long a2; /* syscall arg 4 */
+ unsigned long d3; /* syscall arg 5 */
+ unsigned long d2; /* syscall arg 6 */
+ unsigned long mcvf;
+ unsigned long mcrl;
+ unsigned long mcrh;
+ unsigned long mdrq;
+ unsigned long e1;
+ unsigned long e0;
+ unsigned long e7;
+ unsigned long e6;
+ unsigned long e5;
+ unsigned long e4;
+ unsigned long e3;
+ unsigned long e2;
+ unsigned long sp;
+ unsigned long lar;
+ unsigned long lir;
+ unsigned long mdr;
+ unsigned long a1;
+ unsigned long a0; /* syscall arg 1 */
+ unsigned long d1; /* syscall arg 2 */
+ unsigned long d0; /* syscall ret */
+ struct pt_regs *next; /* next frame pointer */
+ unsigned long orig_d0; /* syscall number */
+ unsigned long epsw;
+ unsigned long pc;
+};
+#endif
+
+extern struct pt_regs *__frame; /* current frame pointer */
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD 0x00000001
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
+#define instruction_pointer(regs) ((regs)->pc)
+extern void show_regs(struct pt_regs *);
+#endif
+
+#define profile_pc(regs) ((regs)->pc)
+
+#endif /* _ASM_PTRACE_H */
diff --git a/include/asm-mn10300/reset-regs.h b/include/asm-mn10300/reset-regs.h
new file mode 100644
index 0000000..174523d
--- /dev/null
+++ b/include/asm-mn10300/reset-regs.h
@@ -0,0 +1,64 @@
+/* MN10300 Reset controller and watchdog timer definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_RESET_REGS_H
+#define _ASM_RESET_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_MN10300_WD_TIMER
+#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */
+#endif
+
+/*
+ * watchdog timer registers
+ */
+#define WDBC __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */
+
+#define WDCTR __SYSREG(0xc0001002, u8) /* watchdog timer control reg */
+#define WDCTR_WDCK 0x07 /* clock source selection */
+#define WDCTR_WDCK_256th 0x00 /* - OSCI/256 */
+#define WDCTR_WDCK_1024th 0x01 /* - OSCI/1024 */
+#define WDCTR_WDCK_2048th 0x02 /* - OSCI/2048 */
+#define WDCTR_WDCK_16384th 0x03 /* - OSCI/16384 */
+#define WDCTR_WDCK_65536th 0x04 /* - OSCI/65536 */
+#define WDCTR_WDRST 0x40 /* binary counter reset */
+#define WDCTR_WDCNE 0x80 /* watchdog timer enable */
+
+#define RSTCTR __SYSREG(0xc0001004, u8) /* reset control reg */
+#define RSTCTR_CHIPRST 0x01 /* chip reset */
+#define RSTCTR_DBFRST 0x02 /* double fault reset flag */
+#define RSTCTR_WDTRST 0x04 /* watchdog timer reset flag */
+#define RSTCTR_WDREN 0x08 /* watchdog timer reset enable */
+
+#ifndef __ASSEMBLY__
+
+static inline void mn10300_proc_hard_reset(void)
+{
+ RSTCTR &= ~RSTCTR_CHIPRST;
+ RSTCTR |= RSTCTR_CHIPRST;
+}
+
+extern unsigned int watchdog_alert_counter;
+
+extern void watchdog_go(void);
+extern asmlinkage void watchdog_handler(void);
+extern asmlinkage
+void watchdog_interrupt(struct pt_regs *, enum exception_code);
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RESET_REGS_H */
diff --git a/include/asm-mn10300/resource.h b/include/asm-mn10300/resource.h
new file mode 100644
index 0000000..04bc4db
--- /dev/null
+++ b/include/asm-mn10300/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/include/asm-mn10300/rtc-regs.h b/include/asm-mn10300/rtc-regs.h
new file mode 100644
index 0000000..c42deef
--- /dev/null
+++ b/include/asm-mn10300/rtc-regs.h
@@ -0,0 +1,86 @@
+/* MN10300 on-chip Real-Time Clock registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_REGS_H
+#define _ASM_RTC_REGS_H
+
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+#define RTSCR __SYSREG(0xd8600000, u8) /* RTC seconds count reg */
+#define RTSAR __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */
+#define RTMCR __SYSREG(0xd8600002, u8) /* RTC minutes count reg */
+#define RTMAR __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */
+#define RTHCR __SYSREG(0xd8600004, u8) /* RTC hours count reg */
+#define RTHAR __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */
+#define RTDWCR __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */
+#define RTDMCR __SYSREG(0xd8600007, u8) /* RTC days count reg */
+#define RTMTCR __SYSREG(0xd8600008, u8) /* RTC months count reg */
+#define RTYCR __SYSREG(0xd8600009, u8) /* RTC years count reg */
+
+#define RTCRA __SYSREG(0xd860000a, u8)/* RTC control reg A */
+#define RTCRA_RS 0x0f /* periodic timer interrupt cycle setting */
+#define RTCRA_RS_NONE 0x00 /* - off */
+#define RTCRA_RS_3_90625ms 0x01 /* - 3.90625ms (1/256s) */
+#define RTCRA_RS_7_8125ms 0x02 /* - 7.8125ms (1/128s) */
+#define RTCRA_RS_122_070us 0x03 /* - 122.070us (1/8192s) */
+#define RTCRA_RS_244_141us 0x04 /* - 244.141us (1/4096s) */
+#define RTCRA_RS_488_281us 0x05 /* - 488.281us (1/2048s) */
+#define RTCRA_RS_976_5625us 0x06 /* - 976.5625us (1/1024s) */
+#define RTCRA_RS_1_953125ms 0x07 /* - 1.953125ms (1/512s) */
+#define RTCRA_RS_3_90624ms 0x08 /* - 3.90624ms (1/256s) */
+#define RTCRA_RS_7_8125ms_b 0x09 /* - 7.8125ms (1/128s) */
+#define RTCRA_RS_15_625ms 0x0a /* - 15.625ms (1/64s) */
+#define RTCRA_RS_31_25ms 0x0b /* - 31.25ms (1/32s) */
+#define RTCRA_RS_62_5ms 0x0c /* - 62.5ms (1/16s) */
+#define RTCRA_RS_125ms 0x0d /* - 125ms (1/8s) */
+#define RTCRA_RS_250ms 0x0e /* - 250ms (1/4s) */
+#define RTCRA_RS_500ms 0x0f /* - 500ms (1/2s) */
+#define RTCRA_DVR 0x40 /* divider reset */
+#define RTCRA_UIP 0x80 /* clock update flag */
+
+#define RTCRB __SYSREG(0xd860000b, u8) /* RTC control reg B */
+#define RTCRB_DSE 0x01 /* daylight savings time enable */
+#define RTCRB_TM 0x02 /* time format */
+#define RTCRB_TM_12HR 0x00 /* - 12 hour format */
+#define RTCRB_TM_24HR 0x02 /* - 24 hour format */
+#define RTCRB_DM 0x04 /* numeric value format */
+#define RTCRB_DM_BCD 0x00 /* - BCD */
+#define RTCRB_DM_BINARY 0x04 /* - binary */
+#define RTCRB_UIE 0x10 /* update interrupt disable */
+#define RTCRB_AIE 0x20 /* alarm interrupt disable */
+#define RTCRB_PIE 0x40 /* periodic interrupt disable */
+#define RTCRB_SET 0x80 /* clock update enable */
+
+#define RTSRC __SYSREG(0xd860000c, u8) /* RTC status reg C */
+#define RTSRC_UF 0x10 /* update end interrupt flag */
+#define RTSRC_AF 0x20 /* alarm interrupt flag */
+#define RTSRC_PF 0x40 /* periodic interrupt flag */
+#define RTSRC_IRQF 0x80 /* interrupt flag */
+
+#define RTIRQ 32
+#define RTICR GxICR(RTIRQ)
+
+/*
+ * MC146818 RTC compatibility defs for the MN10300 on-chip RTC
+ */
+#define RTC_PORT(x) 0xd8600000
+#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
+
+#define CMOS_READ(addr) __SYSREG(0xd8600000 + (addr), u8)
+#define CMOS_WRITE(val, addr) \
+ do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0)
+
+#define RTC_IRQ RTIRQ
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RTC_REGS_H */
diff --git a/include/asm-mn10300/rtc.h b/include/asm-mn10300/rtc.h
new file mode 100644
index 0000000..c295194
--- /dev/null
+++ b/include/asm-mn10300/rtc.h
@@ -0,0 +1,41 @@
+/* MN10300 Real time clock definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+#ifdef CONFIG_MN10300_RTC
+
+#include <linux/init.h>
+
+extern void check_rtc_time(void);
+extern void __init calibrate_clock(void);
+extern unsigned long __init get_initial_rtc_time(void);
+
+#else /* !CONFIG_MN10300_RTC */
+
+static inline void check_rtc_time(void)
+{
+}
+
+static inline void calibrate_clock(void)
+{
+}
+
+static inline unsigned long get_initial_rtc_time(void)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#include <asm-generic/rtc.h>
+
+#endif /* _ASM_RTC_H */
diff --git a/include/asm-mn10300/scatterlist.h b/include/asm-mn10300/scatterlist.h
new file mode 100644
index 0000000..e29d91d
--- /dev/null
+++ b/include/asm-mn10300/scatterlist.h
@@ -0,0 +1,46 @@
+/* MN10300 Scatterlist definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+/*
+ * Drivers must set either ->address or (preferred) page and ->offset
+ * to indicate where data must be transferred to/from.
+ *
+ * Using page is recommended since it handles highmem data as well as
+ * low mem. ->address is restricted to data which has a virtual mapping, and
+ * it will go away in the future. Updating to page can be automated very
+ * easily -- something like
+ *
+ * sg->address = some_ptr;
+ *
+ * can be rewritten as
+ *
+ * sg_set_page(virt_to_page(some_ptr));
+ * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
+ *
+ * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
+ */
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ unsigned int offset; /* for highmem, page offset */
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+#endif /* _ASM_SCATTERLIST_H */
diff --git a/include/asm-mn10300/sections.h b/include/asm-mn10300/sections.h
new file mode 100644
index 0000000..2b8c516
--- /dev/null
+++ b/include/asm-mn10300/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/include/asm-mn10300/semaphore.h b/include/asm-mn10300/semaphore.h
new file mode 100644
index 0000000..5a9e1ad
--- /dev/null
+++ b/include/asm-mn10300/semaphore.h
@@ -0,0 +1,169 @@
+/* MN10300 Semaphores
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SEMAPHORE_H
+#define _ASM_SEMAPHORE_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+
+#define SEMAPHORE_DEBUG 0
+
+/*
+ * the semaphore definition
+ * - if count is >0 then there are tokens available on the semaphore for down
+ * to collect
+ * - if count is <=0 then there are no spare tokens, and anyone that wants one
+ * must wait
+ * - if wait_list is not empty, then there are processes waiting for the
+ * semaphore
+ */
+struct semaphore {
+ atomic_t count; /* it's not really atomic, it's
+ * just that certain modules
+ * expect to be able to access
+ * it directly */
+ spinlock_t wait_lock;
+ struct list_head wait_list;
+#if SEMAPHORE_DEBUG
+ unsigned __magic;
+#endif
+};
+
+#if SEMAPHORE_DEBUG
+# define __SEM_DEBUG_INIT(name) , (long)&(name).__magic
+#else
+# define __SEM_DEBUG_INIT(name)
+#endif
+
+
+#define __SEMAPHORE_INITIALIZER(name, init_count) \
+{ \
+ .count = ATOMIC_INIT(init_count), \
+ .wait_lock = __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+ .wait_list = LIST_HEAD_INIT((name).wait_list) \
+ __SEM_DEBUG_INIT(name) \
+}
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+ struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+ *sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void init_MUTEX(struct semaphore *sem)
+{
+ sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED(struct semaphore *sem)
+{
+ sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore *sem, unsigned long flags);
+extern int __down_interruptible(struct semaphore *sem, unsigned long flags);
+extern void __up(struct semaphore *sem);
+
+static inline void down(struct semaphore *sem)
+{
+ unsigned long flags;
+ int count;
+
+#if SEMAPHORE_DEBUG
+ CHECK_MAGIC(sem->__magic);
+#endif
+
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ count = atomic_read(&sem->count);
+ if (likely(count > 0)) {
+ atomic_set(&sem->count, count - 1);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+ } else {
+ __down(sem, flags);
+ }
+}
+
+static inline int down_interruptible(struct semaphore *sem)
+{
+ unsigned long flags;
+ int count, ret = 0;
+
+#if SEMAPHORE_DEBUG
+ CHECK_MAGIC(sem->__magic);
+#endif
+
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ count = atomic_read(&sem->count);
+ if (likely(count > 0)) {
+ atomic_set(&sem->count, count - 1);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+ } else {
+ ret = __down_interruptible(sem, flags);
+ }
+ return ret;
+}
+
+/*
+ * non-blockingly attempt to down() a semaphore.
+ * - returns zero if we acquired it
+ */
+static inline int down_trylock(struct semaphore *sem)
+{
+ unsigned long flags;
+ int count, success = 0;
+
+#if SEMAPHORE_DEBUG
+ CHECK_MAGIC(sem->__magic);
+#endif
+
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ count = atomic_read(&sem->count);
+ if (likely(count > 0)) {
+ atomic_set(&sem->count, count - 1);
+ success = 1;
+ }
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+ return !success;
+}
+
+static inline void up(struct semaphore *sem)
+{
+ unsigned long flags;
+
+#if SEMAPHORE_DEBUG
+ CHECK_MAGIC(sem->__magic);
+#endif
+
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ if (!list_empty(&sem->wait_list))
+ __up(sem);
+ else
+ atomic_set(&sem->count, atomic_read(&sem->count) + 1);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+}
+
+static inline int sem_getcount(struct semaphore *sem)
+{
+ return atomic_read(&sem->count);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-mn10300/sembuf.h b/include/asm-mn10300/sembuf.h
new file mode 100644
index 0000000..301f3f9
--- /dev/null
+++ b/include/asm-mn10300/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_SEMBUF_H */
diff --git a/include/asm-mn10300/serial-regs.h b/include/asm-mn10300/serial-regs.h
new file mode 100644
index 0000000..6498469
--- /dev/null
+++ b/include/asm-mn10300/serial-regs.h
@@ -0,0 +1,160 @@
+/* MN10300 on-board serial port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* serial port 0 */
+#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */
+#define SC01CTR_CK 0x0007 /* clock source select */
+#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */
+#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
+#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
+#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */
+#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */
+#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */
+#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
+#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */
+#define SC01CTR_STB 0x0008 /* stop bit select */
+#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */
+#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */
+#define SC01CTR_PB 0x0070 /* parity bit select */
+#define SC01CTR_PB_NONE 0x0000 /* - no parity */
+#define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
+#define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
+#define SC01CTR_PB_EVEN 0x0060 /* - even parity */
+#define SC01CTR_PB_ODD 0x0070 /* - odd parity */
+#define SC01CTR_CLN 0x0080 /* character length */
+#define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
+#define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
+#define SC01CTR_TOE 0x0100 /* T input output enable */
+#define SC01CTR_OD 0x0200 /* bit order select */
+#define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */
+#define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */
+#define SC01CTR_MD 0x0c00 /* mode select */
+#define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */
+#define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */
+#define SC01CTR_MD_I2C 0x0800 /* - I2C mode */
+#define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */
+#define SC01CTR_IIC 0x1000 /* I2C mode select */
+#define SC01CTR_BKE 0x2000 /* break transmit enable */
+#define SC01CTR_RXE 0x4000 /* receive enable */
+#define SC01CTR_TXE 0x8000 /* transmit enable */
+
+#define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */
+#define SC01ICR_DMD 0x80 /* output data mode */
+#define SC01ICR_TD 0x20 /* transmit DMA trigger cause */
+#define SC01ICR_TI 0x10 /* transmit interrupt cause */
+#define SC01ICR_RES 0x04 /* receive error select */
+#define SC01ICR_RI 0x01 /* receive interrupt cause */
+
+#define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */
+#define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */
+
+#define SC0STR __SYSREG(0xd400200c, u16) /* status reg */
+#define SC01STR_OEF 0x0001 /* overrun error found */
+#define SC01STR_PEF 0x0002 /* parity error found */
+#define SC01STR_FEF 0x0004 /* framing error found */
+#define SC01STR_RBF 0x0010 /* receive buffer status */
+#define SC01STR_TBF 0x0020 /* transmit buffer status */
+#define SC01STR_RXF 0x0040 /* receive status */
+#define SC01STR_TXF 0x0080 /* transmit status */
+#define SC01STR_STF 0x0100 /* I2C start sequence found */
+#define SC01STR_SPF 0x0200 /* I2C stop sequence found */
+
+#define SC0RXIRQ 20 /* timer 0 Receive IRQ */
+#define SC0TXIRQ 21 /* timer 0 Transmit IRQ */
+
+#define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */
+#define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */
+
+/* serial port 1 */
+#define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */
+#define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */
+#define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
+#define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
+#define SC1STR __SYSREG(0xd400201c, u16) /* status reg */
+
+#define SC1RXIRQ 22 /* timer 1 Receive IRQ */
+#define SC1TXIRQ 23 /* timer 1 Transmit IRQ */
+
+#define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */
+#define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */
+
+/* serial port 2 */
+#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */
+#define SC2CTR_CK 0x0003 /* clock source select */
+#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */
+#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */
+#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */
+#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */
+#define SC2CTR_STB 0x0008 /* stop bit select */
+#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */
+#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */
+#define SC2CTR_PB 0x0070 /* parity bit select */
+#define SC2CTR_PB_NONE 0x0000 /* - no parity */
+#define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
+#define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
+#define SC2CTR_PB_EVEN 0x0060 /* - even parity */
+#define SC2CTR_PB_ODD 0x0070 /* - odd parity */
+#define SC2CTR_CLN 0x0080 /* character length */
+#define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
+#define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
+#define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */
+#define SC2CTR_OD 0x0200 /* bit order select */
+#define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */
+#define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */
+#define SC2CTR_TWS 0x1000 /* transmit wait select */
+#define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */
+#define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */
+#define SC2CTR_BKE 0x2000 /* break transmit enable */
+#define SC2CTR_RXE 0x4000 /* receive enable */
+#define SC2CTR_TXE 0x8000 /* transmit enable */
+
+#define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */
+#define SC2ICR_TD 0x20 /* transmit DMA trigger cause */
+#define SC2ICR_TI 0x10 /* transmit interrupt cause */
+#define SC2ICR_RES 0x04 /* receive error select */
+#define SC2ICR_RI 0x01 /* receive interrupt cause */
+
+#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
+#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
+#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */
+#define SC2STR_OEF 0x0001 /* overrun error found */
+#define SC2STR_PEF 0x0002 /* parity error found */
+#define SC2STR_FEF 0x0004 /* framing error found */
+#define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */
+#define SC2STR_RBF 0x0010 /* receive buffer status */
+#define SC2STR_TBF 0x0020 /* transmit buffer status */
+#define SC2STR_RXF 0x0040 /* receive status */
+#define SC2STR_TXF 0x0080 /* transmit status */
+
+#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */
+
+#define SC2RXIRQ 24 /* serial 2 Receive IRQ */
+#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */
+
+#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
+#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SERIAL_REGS_H */
diff --git a/include/asm-mn10300/serial.h b/include/asm-mn10300/serial.h
new file mode 100644
index 0000000..99785a9
--- /dev/null
+++ b/include/asm-mn10300/serial.h
@@ -0,0 +1,36 @@
+/* Standard UART definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * The ASB2305 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD (18432000 / 16)
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#define HUB6_FLAGS 0
+#define RS_TABLE_SIZE 64
+#else
+#define RS_TABLE_SIZE
+#endif
+
+#include <asm/unit/serial.h>
diff --git a/include/asm-mn10300/setup.h b/include/asm-mn10300/setup.h
new file mode 100644
index 0000000..08356c8
--- /dev/null
+++ b/include/asm-mn10300/setup.h
@@ -0,0 +1,17 @@
+/* MN10300 Setup declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+extern void __init unit_setup(void);
+extern void __init unit_init_IRQ(void);
+
+#endif /* _ASM_SETUP_H */
diff --git a/include/asm-mn10300/shmbuf.h b/include/asm-mn10300/shmbuf.h
new file mode 100644
index 0000000..8f300cc
--- /dev/null
+++ b/include/asm-mn10300/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
diff --git a/include/asm-mn10300/shmparam.h b/include/asm-mn10300/shmparam.h
new file mode 100644
index 0000000..ab666ed
--- /dev/null
+++ b/include/asm-mn10300/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
diff --git a/include/asm-mn10300/sigcontext.h b/include/asm-mn10300/sigcontext.h
new file mode 100644
index 0000000..4de3aff
--- /dev/null
+++ b/include/asm-mn10300/sigcontext.h
@@ -0,0 +1,52 @@
+/* MN10300 Userspace signal context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+struct fpucontext {
+ /* Regular FPU environment */
+ unsigned long fs[32]; /* fpu registers */
+ unsigned long fpcr; /* fpu control register */
+};
+
+struct sigcontext {
+ unsigned long d0;
+ unsigned long d1;
+ unsigned long d2;
+ unsigned long d3;
+ unsigned long a0;
+ unsigned long a1;
+ unsigned long a2;
+ unsigned long a3;
+ unsigned long e0;
+ unsigned long e1;
+ unsigned long e2;
+ unsigned long e3;
+ unsigned long e4;
+ unsigned long e5;
+ unsigned long e6;
+ unsigned long e7;
+ unsigned long lar;
+ unsigned long lir;
+ unsigned long mdr;
+ unsigned long mcvf;
+ unsigned long mcrl;
+ unsigned long mcrh;
+ unsigned long mdrq;
+ unsigned long sp;
+ unsigned long epsw;
+ unsigned long pc;
+ struct fpucontext *fpucontext;
+ unsigned long oldmask;
+};
+
+
+#endif /* _ASM_SIGCONTEXT_H */
diff --git a/include/asm-mn10300/siginfo.h b/include/asm-mn10300/siginfo.h
new file mode 100644
index 0000000..0815d29
--- /dev/null
+++ b/include/asm-mn10300/siginfo.h
@@ -0,0 +1 @@
+#include <asm-generic/siginfo.h>
diff --git a/include/asm-mn10300/signal.h b/include/asm-mn10300/signal.h
new file mode 100644
index 0000000..e98817c
--- /dev/null
+++ b/include/asm-mn10300/signal.h
@@ -0,0 +1,171 @@
+/* MN10300 Signal definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX (_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001U
+#define SA_NOCLDWAIT 0x00000002U
+#define SA_SIGINFO 0x00000004U
+#define SA_ONSTACK 0x08000000U
+#define SA_RESTART 0x10000000U
+#define SA_NODEFER 0x40000000U
+#define SA_RESETHAND 0x80000000U
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+
+struct pt_regs;
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/include/asm-mn10300/smp.h b/include/asm-mn10300/smp.h
new file mode 100644
index 0000000..4eb8c61
--- /dev/null
+++ b/include/asm-mn10300/smp.h
@@ -0,0 +1,18 @@
+/* MN10300 SMP support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SMP_H
+#define _ASM_SMP_H
+
+#ifdef CONFIG_SMP
+#error SMP not yet supported for MN10300
+#endif
+
+#endif
diff --git a/include/asm-mn10300/socket.h b/include/asm-mn10300/socket.h
new file mode 100644
index 0000000..99ca648
--- /dev/null
+++ b/include/asm-mn10300/socket.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-mn10300/sockios.h b/include/asm-mn10300/sockios.h
new file mode 100644
index 0000000..b03043a
--- /dev/null
+++ b/include/asm-mn10300/sockios.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS_H */
diff --git a/include/asm-mn10300/spinlock.h b/include/asm-mn10300/spinlock.h
new file mode 100644
index 0000000..4bf9c8b
--- /dev/null
+++ b/include/asm-mn10300/spinlock.h
@@ -0,0 +1,16 @@
+/* MN10300 spinlock support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#error SMP spinlocks not implemented for MN10300
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/include/asm-mn10300/stat.h b/include/asm-mn10300/stat.h
new file mode 100644
index 0000000..63ff837
--- /dev/null
+++ b/include/asm-mn10300/stat.h
@@ -0,0 +1,78 @@
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+struct stat {
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned long st_rdev;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned char __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO 1
+ unsigned long __st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned long st_uid;
+ unsigned long st_gid;
+
+ unsigned long long st_rdev;
+ unsigned char __pad3[4];
+
+ long long st_size;
+ unsigned long st_blksize;
+
+ unsigned long st_blocks; /* Number 512-byte blocks allocated. */
+ unsigned long __pad4; /* future possible st_blocks high bits */
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+
+ unsigned long st_mtime;
+ unsigned int st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+
+ unsigned long long st_ino;
+};
+
+#define STAT_HAVE_NSEC 1
+
+#endif /* _ASM_STAT_H */
diff --git a/include/asm-mn10300/statfs.h b/include/asm-mn10300/statfs.h
new file mode 100644
index 0000000..0b91fe1
--- /dev/null
+++ b/include/asm-mn10300/statfs.h
@@ -0,0 +1 @@
+#include <asm-generic/statfs.h>
diff --git a/include/asm-mn10300/string.h b/include/asm-mn10300/string.h
new file mode 100644
index 0000000..47dbd43
--- /dev/null
+++ b/include/asm-mn10300/string.h
@@ -0,0 +1,32 @@
+/* MN10300 Optimised string functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *dest, int ch, size_t count);
+extern void *memcpy(void *dest, const void *src, size_t count);
+extern void *memmove(void *dest, const void *src, size_t count);
+
+
+extern void __struct_cpy_bug(void);
+#define struct_cpy(x, y) \
+({ \
+ if (sizeof(*(x)) != sizeof(*(y))) \
+ __struct_cpy_bug; \
+ memcpy(x, y, sizeof(*(x))); \
+})
+
+#endif /* _ASM_STRING_H */
diff --git a/include/asm-mn10300/system.h b/include/asm-mn10300/system.h
new file mode 100644
index 0000000..8214fb7
--- /dev/null
+++ b/include/asm-mn10300/system.h
@@ -0,0 +1,237 @@
+/* MN10300 System definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+
+struct task_struct;
+struct thread_struct;
+
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev,
+ struct thread_struct *next,
+ struct task_struct *prev_task);
+
+/* context switching is now performed out-of-line in switch_to.S */
+#define switch_to(prev, next, last) \
+do { \
+ current->thread.wchan = (u_long) __builtin_return_address(0); \
+ (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
+ mb(); \
+ current->thread.wchan = 0; \
+} while (0)
+
+#define arch_align_stack(x) (x)
+
+#define nop() asm volatile ("nop")
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * For now, "wmb()" doesn't actually do anything, as all
+ * Intel CPU's follow what Intel calls a *Processor Order*,
+ * in which all writes are seen in the program order even
+ * outside the CPU.
+ *
+ * I expect future Intel CPU's to have a weaker ordering,
+ * but I'd also expect them to finally get their act together
+ * and add some real memory barriers if so.
+ *
+ * Some non intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+
+#define mb() asm volatile ("": : :"memory")
+#define rmb() mb()
+#define wmb() asm volatile ("": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#endif
+
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define read_barrier_depends() do {} while (0)
+#define smp_read_barrier_depends() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * interrupt control
+ * - "disabled": run in IM1/2
+ * - level 0 - GDB stub
+ * - level 1 - virtual serial DMA (if present)
+ * - level 5 - normal interrupt priority
+ * - level 6 - timer interrupt
+ * - "enabled": run in IM7
+ */
+#ifdef CONFIG_MN10300_TTYSM
+#define MN10300_CLI_LEVEL EPSW_IM_2
+#else
+#define MN10300_CLI_LEVEL EPSW_IM_1
+#endif
+
+#define local_save_flags(x) \
+do { \
+ typecheck(unsigned long, x); \
+ asm volatile( \
+ " mov epsw,%0 \n" \
+ : "=d"(x) \
+ ); \
+} while (0)
+
+#define local_irq_disable() \
+do { \
+ asm volatile( \
+ " and %0,epsw \n" \
+ " or %1,epsw \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ : \
+ : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \
+ ); \
+} while (0)
+
+#define local_irq_save(x) \
+do { \
+ local_save_flags(x); \
+ local_irq_disable(); \
+} while (0)
+
+/*
+ * we make sure local_irq_enable() doesn't cause priority inversion
+ */
+#ifndef __ASSEMBLY__
+
+extern unsigned long __mn10300_irq_enabled_epsw;
+
+#endif
+
+#define local_irq_enable() \
+do { \
+ unsigned long tmp; \
+ \
+ asm volatile( \
+ " mov epsw,%0 \n" \
+ " and %1,%0 \n" \
+ " or %2,%0 \n" \
+ " mov %0,epsw \n" \
+ : "=&d"(tmp) \
+ : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \
+ ); \
+} while (0)
+
+#define local_irq_restore(x) \
+do { \
+ typecheck(unsigned long, x); \
+ asm volatile( \
+ " mov %0,epsw \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ : \
+ : "d"(x) \
+ : "memory", "cc" \
+ ); \
+} while (0)
+
+#define irqs_disabled() \
+({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \
+})
+
+/* hook to save power by halting the CPU
+ * - called from the idle loop
+ * - must reenable interrupts (which takes three instruction cycles to complete)
+ */
+#define safe_halt() \
+do { \
+ asm volatile(" or %0,epsw \n" \
+ " nop \n" \
+ " nop \n" \
+ " bset %2,(%1) \n" \
+ : \
+ : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\
+ : "cc" \
+ ); \
+} while (0)
+
+#define STI or EPSW_IE|EPSW_IM,epsw
+#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop
+
+/*****************************************************************************/
+/*
+ * MN10300 doesn't actually have an exchange instruction
+ */
+#ifndef __ASSEMBLY__
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+static inline
+unsigned long __xchg(volatile unsigned long *m, unsigned long val)
+{
+ unsigned long retval;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ retval = *m;
+ *m = val;
+ local_irq_restore(flags);
+ return retval;
+}
+
+#define xchg(ptr, v) \
+ ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \
+ (unsigned long)(v)))
+
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+ unsigned long old, unsigned long new)
+{
+ unsigned long retval;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ retval = *m;
+ if (retval == old)
+ *m = new;
+ local_irq_restore(flags);
+ return retval;
+}
+
+#define cmpxchg(ptr, o, n) \
+ ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SYSTEM_H */
diff --git a/include/asm-mn10300/termbits.h b/include/asm-mn10300/termbits.h
new file mode 100644
index 0000000..eb2b0dc
--- /dev/null
+++ b/include/asm-mn10300/termbits.h
@@ -0,0 +1,200 @@
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CTVB 004000000000 /* VisioBraille Terminal flow control */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _ASM_TERMBITS_H */
diff --git a/include/asm-mn10300/termios.h b/include/asm-mn10300/termios.h
new file mode 100644
index 0000000..dd7cf61
--- /dev/null
+++ b/include/asm-mn10300/termios.h
@@ -0,0 +1,92 @@
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+#ifdef __KERNEL__
+/* intr=^C quit=^| erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+ unsigned short __tmp; \
+ get_user(__tmp, &(termio)->x); \
+ *(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+ copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) \
+ copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) \
+ copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) \
+ copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* _ASM_TERMIOS_H */
diff --git a/include/asm-mn10300/thread_info.h b/include/asm-mn10300/thread_info.h
new file mode 100644
index 0000000..e397e71
--- /dev/null
+++ b/include/asm-mn10300/thread_info.h
@@ -0,0 +1,168 @@
+/* MN10300 Low-level thread information
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+#define PREEMPT_ACTIVE 0x10000000
+
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE (4096)
+#else
+#define THREAD_SIZE (8192)
+#endif
+
+#define STACK_WARN (THREAD_SIZE / 8)
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ * must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ __u32 cpu; /* current CPU */
+ __s32 preempt_count; /* 0 => preemptable, <0 => BUG */
+
+ mm_segment_t addr_limit; /* thread address space:
+ 0-0xBFFFFFFF for user-thead
+ 0-0xFFFFFFFF for kernel-thread
+ */
+ struct restart_block restart_block;
+
+ __u8 supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#endif
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+#define init_uregs \
+ ((struct pt_regs *) \
+ ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs)))
+
+extern struct thread_info *__current_ti;
+
+/* how to get the thread information struct from C */
+static inline __attribute__((const))
+struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+ asm("mov sp,%0\n"
+ "and %1,%0\n"
+ : "=d" (ti)
+ : "i" (~(THREAD_SIZE - 1))
+ : "cc");
+ return ti;
+}
+
+/* how to get the current stack pointer from C */
+static inline unsigned long current_stack_pointer(void)
+{
+ unsigned long sp;
+ asm("mov sp,%0; ":"=r" (sp));
+ return sp;
+}
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(ti) kfree((ti))
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __VMLINUX_LDS__
+/* how to get the thread information struct from ASM */
+.macro GET_THREAD_INFO reg
+ mov sp,\reg
+ and -THREAD_SIZE,\reg
+.endm
+#endif
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ * access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */
+#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE 17 /* OOM killer killed process */
+#define TIF_FREEZE 18 /* freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING +(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED +(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP)
+#define _TIF_RESTORE_SIGMASK +(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE +(1 << TIF_FREEZE)
+
+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-mn10300/timer-regs.h b/include/asm-mn10300/timer-regs.h
new file mode 100644
index 0000000..1d883b7
--- /dev/null
+++ b/include/asm-mn10300/timer-regs.h
@@ -0,0 +1,293 @@
+/* AM33v2 on-board timer module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* timer prescalar control */
+#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */
+#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */
+#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */
+
+/* 8 bit timers */
+#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */
+#define TM0MD_SRC 0x07 /* timer source */
+#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */
+#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */
+#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM1MD __SYSREG(0xd4003001, u8) /* timer 1 mode register */
+#define TM1MD_SRC 0x07 /* timer source */
+#define TM1MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM1MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM1MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */
+#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */
+#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM2MD __SYSREG(0xd4003002, u8) /* timer 2 mode register */
+#define TM2MD_SRC 0x07 /* timer source */
+#define TM2MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM2MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM2MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */
+#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */
+#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM3MD __SYSREG(0xd4003003, u8) /* timer 3 mode register */
+#define TM3MD_SRC 0x07 /* timer source */
+#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */
+#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */
+#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM01MD __SYSREG(0xd4003000, u16) /* timer 0:1 mode register */
+
+#define TM0BR __SYSREG(0xd4003010, u8) /* timer 0 base register */
+#define TM1BR __SYSREG(0xd4003011, u8) /* timer 1 base register */
+#define TM2BR __SYSREG(0xd4003012, u8) /* timer 2 base register */
+#define TM3BR __SYSREG(0xd4003013, u8) /* timer 3 base register */
+#define TM01BR __SYSREG(0xd4003010, u16) /* timer 0:1 base register */
+
+#define TM0BC __SYSREGC(0xd4003020, u8) /* timer 0 binary counter */
+#define TM1BC __SYSREGC(0xd4003021, u8) /* timer 1 binary counter */
+#define TM2BC __SYSREGC(0xd4003022, u8) /* timer 2 binary counter */
+#define TM3BC __SYSREGC(0xd4003023, u8) /* timer 3 binary counter */
+#define TM01BC __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */
+
+#define TM0IRQ 2 /* timer 0 IRQ */
+#define TM1IRQ 3 /* timer 1 IRQ */
+#define TM2IRQ 4 /* timer 2 IRQ */
+#define TM3IRQ 5 /* timer 3 IRQ */
+
+#define TM0ICR GxICR(TM0IRQ) /* timer 0 uflow intr ctrl reg */
+#define TM1ICR GxICR(TM1IRQ) /* timer 1 uflow intr ctrl reg */
+#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */
+#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */
+
+/* 16-bit timers 4,5 & 7-11 */
+#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */
+#define TM4MD_SRC 0x07 /* timer source */
+#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM4MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM4MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */
+#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM5MD __SYSREG(0xd4003082, u8) /* timer 5 mode register */
+#define TM5MD_SRC 0x07 /* timer source */
+#define TM5MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM5MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM5MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM5MD_SRC_TM4CASCADE 0x03 /* - cascade with timer 4 */
+#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */
+#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM7MD __SYSREG(0xd4003086, u8) /* timer 7 mode register */
+#define TM7MD_SRC 0x07 /* timer source */
+#define TM7MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM7MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM7MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */
+#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM8MD __SYSREG(0xd4003088, u8) /* timer 8 mode register */
+#define TM8MD_SRC 0x07 /* timer source */
+#define TM8MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM8MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM8MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM8MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */
+#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */
+#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM9MD __SYSREG(0xd400308a, u8) /* timer 9 mode register */
+#define TM9MD_SRC 0x07 /* timer source */
+#define TM9MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM9MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM9MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM9MD_SRC_TM8CASCADE 0x03 /* - cascade with timer 8 */
+#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */
+#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM10MD __SYSREG(0xd400308c, u8) /* timer 10 mode register */
+#define TM10MD_SRC 0x07 /* timer source */
+#define TM10MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM10MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM10MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM10MD_SRC_TM9CASCADE 0x03 /* - cascade with timer 9 */
+#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */
+#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM11MD __SYSREG(0xd400308e, u8) /* timer 11 mode register */
+#define TM11MD_SRC 0x07 /* timer source */
+#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */
+#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */
+#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */
+#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */
+#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */
+#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */
+#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */
+#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */
+#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */
+#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */
+
+#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */
+#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */
+#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */
+
+#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */
+#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */
+#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */
+#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */
+#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */
+
+#define TM4IRQ 6 /* timer 4 IRQ */
+#define TM5IRQ 7 /* timer 5 IRQ */
+#define TM7IRQ 11 /* timer 7 IRQ */
+#define TM8IRQ 12 /* timer 8 IRQ */
+#define TM9IRQ 13 /* timer 9 IRQ */
+#define TM10IRQ 14 /* timer 10 IRQ */
+#define TM11IRQ 15 /* timer 11 IRQ */
+
+#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */
+#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */
+#define TM7ICR GxICR(TM7IRQ) /* timer 7 uflow intr ctrl reg */
+#define TM8ICR GxICR(TM8IRQ) /* timer 8 uflow intr ctrl reg */
+#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */
+#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */
+#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */
+
+/* 16-bit timer 6 */
+#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */
+#define TM6MD_SRC 0x0007 /* timer source */
+#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */
+#define TM6MD_SRC_IOCLK_8 0x0001 /* - 1/8 IOCLK */
+#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */
+#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */
+#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */
+#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */
+#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */
+#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */
+#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */
+#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */
+#define TM6MD_PWM 0x3800 /* PWM output mode */
+#define TM6MD_PWM_DIS 0x0000 /* - disabled */
+#define TM6MD_PWM_10BIT 0x1000 /* - 10 bits mode */
+#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */
+#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */
+#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */
+#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */
+#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */
+
+#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */
+#define TM6MDA_OUT 0x07 /* output select */
+#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */
+#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */
+#define TM6MDA_OUT_SETA 0x02 /* - set at match A */
+#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */
+#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */
+#define TM6MDA_MODE 0xc0 /* compare A register mode */
+#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
+#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
+#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
+#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
+#define TM6MDA_EDGE 0x20 /* compare A edge select */
+#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */
+#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */
+#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */
+
+#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */
+#define TM6MDB_OUT 0x07 /* output select */
+#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */
+#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */
+#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */
+#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */
+#define TM6MDB_MODE 0xc0 /* compare B register mode */
+#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
+#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
+#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
+#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
+#define TM6MDB_EDGE 0x20 /* compare B edge select */
+#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */
+#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */
+#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */
+
+#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */
+#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */
+#define TM6BC __SYSREG(0xd40030a4, u16) /* timer6 binary counter */
+
+#define TM6IRQ 6 /* timer 6 IRQ */
+#define TM6AIRQ 9 /* timer 6A IRQ */
+#define TM6BIRQ 10 /* timer 6B IRQ */
+
+#define TM6ICR GxICR(TM6IRQ) /* timer 6 uflow intr ctrl reg */
+#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */
+#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMER_REGS_H */
diff --git a/include/asm-mn10300/timex.h b/include/asm-mn10300/timex.h
new file mode 100644
index 0000000..3944277
--- /dev/null
+++ b/include/asm-mn10300/timex.h
@@ -0,0 +1,33 @@
+/* MN10300 Architecture time management specifications
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#include <asm/hardirq.h>
+#include <asm/unit/timex.h>
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
+ * to something appropriate, but what? */
+
+extern cycles_t cacheflush_time;
+
+#ifdef __KERNEL__
+
+static inline cycles_t get_cycles(void)
+{
+ return read_timestamp_counter();
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMEX_H */
diff --git a/include/asm-mn10300/tlb.h b/include/asm-mn10300/tlb.h
new file mode 100644
index 0000000..65d232b
--- /dev/null
+++ b/include/asm-mn10300/tlb.h
@@ -0,0 +1,34 @@
+/* MN10300 TLB definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <asm/tlbflush.h>
+
+extern void check_pgt_cache(void);
+
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+/* for now, just use the generic stuff */
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TLB_H */
diff --git a/include/asm-mn10300/tlbflush.h b/include/asm-mn10300/tlbflush.h
new file mode 100644
index 0000000..e023986
--- /dev/null
+++ b/include/asm-mn10300/tlbflush.h
@@ -0,0 +1,80 @@
+/* MN10300 TLB flushing functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <asm/processor.h>
+
+#define __flush_tlb() \
+do { \
+ int w; \
+ __asm__ __volatile__ \
+ (" mov %1,%0 \n" \
+ " or %2,%0 \n" \
+ " mov %0,%1 \n" \
+ : "=d"(w) \
+ : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \
+ : "memory" \
+ ); \
+} while (0)
+
+#define __flush_tlb_all() __flush_tlb()
+#define __flush_tlb_one(addr) __flush_tlb()
+
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb() flushes the current mm struct TLBs
+ * - flush_tlb_all() flushes all processes TLBs
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(mm, start, end) flushes a range of pages
+ * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+#define flush_tlb_all() \
+do { \
+ preempt_disable(); \
+ __flush_tlb_all(); \
+ preempt_enable(); \
+} while (0)
+
+#define flush_tlb_mm(mm) \
+do { \
+ preempt_disable(); \
+ __flush_tlb_all(); \
+ preempt_enable(); \
+} while (0)
+
+#define flush_tlb_range(vma, start, end) \
+do { \
+ unsigned long __s __attribute__((unused)) = (start); \
+ unsigned long __e __attribute__((unused)) = (end); \
+ preempt_disable(); \
+ __flush_tlb_all(); \
+ preempt_enable(); \
+} while (0)
+
+
+#define __flush_tlb_global() flush_tlb_all()
+#define flush_tlb() flush_tlb_all()
+#define flush_tlb_kernel_range(start, end) \
+do { \
+ unsigned long __s __attribute__((unused)) = (start); \
+ unsigned long __e __attribute__((unused)) = (end); \
+ flush_tlb_all(); \
+} while (0)
+
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
+
+#define flush_tlb_pgtables(mm, start, end) do {} while (0)
+
+#endif /* _ASM_TLBFLUSH_H */
diff --git a/include/asm-mn10300/topology.h b/include/asm-mn10300/topology.h
new file mode 100644
index 0000000..5428f33
--- /dev/null
+++ b/include/asm-mn10300/topology.h
@@ -0,0 +1 @@
+#include <asm-generic/topology.h>
diff --git a/include/asm-mn10300/types.h b/include/asm-mn10300/types.h
new file mode 100644
index 0000000..d40ea76
--- /dev/null
+++ b/include/asm-mn10300/types.h
@@ -0,0 +1,67 @@
+/* MN10300 Basic type definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide. */
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/include/asm-mn10300/uaccess.h b/include/asm-mn10300/uaccess.h
new file mode 100644
index 0000000..46b9b64
--- /dev/null
+++ b/include/asm-mn10300/uaccess.h
@@ -0,0 +1,490 @@
+/* MN10300 userspace access functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF)
+#define KERNEL_DS MAKE_MM_SEG(0x9FFFFFFF)
+#define USER_DS MAKE_MM_SEG(TASK_SIZE)
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+ ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned int size)
+{
+ int flag = 1, tmp;
+
+ asm(" add %3,%1 \n" /* set C-flag if addr + size > 4Gb */
+ " bcs 0f \n"
+ " cmp %4,%1 \n" /* jump if addr+size>limit (error) */
+ " bhi 0f \n"
+ " clr %0 \n" /* mark okay */
+ "0: \n"
+ : "=r"(flag), "=&r"(tmp)
+ : "1"(addr), "ir"(size),
+ "r"(current_thread_info()->addr_limit.seg), "0"(flag)
+ : "cc"
+ );
+
+ return flag;
+}
+
+#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size))
+
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
+#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0)
+
+static inline int verify_area(int type, const void *addr, unsigned long size)
+{
+ return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern int fixup_exception(struct pt_regs *regs);
+
+#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "xxx_ret" versions return constant specified in third argument, if
+ * something bad happens. These macros can be optimized for the
+ * case of just returning from the function xxx_ret is used.
+ */
+
+#define put_user_ret(x, ptr, ret) \
+ ({ if (put_user((x), (ptr))) return (ret); })
+#define get_user_ret(x, ptr, ret) \
+ ({ if (get_user((x), (ptr))) return (ret); })
+#define __put_user_ret(x, ptr, ret) \
+ ({ if (__put_user((x), (ptr))) return (ret); })
+#define __get_user_ret(x, ptr, ret) \
+ ({ if (__get_user((x), (ptr))) return (ret); })
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ __typeof(*(ptr)) __gu_val; \
+ unsigned long __gu_addr; \
+ int __gu_err; \
+ __gu_addr = (unsigned long) (ptr); \
+ switch (size) { \
+ case 1: __get_user_asm("bu"); break; \
+ case 2: __get_user_asm("hu"); break; \
+ case 4: __get_user_asm("" ); break; \
+ default: __get_user_unknown(); break; \
+ } \
+ x = (__typeof__(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_check(x, ptr, size) \
+({ \
+ __typeof__(*(ptr)) __gu_val; \
+ unsigned long __gu_addr; \
+ int __gu_err; \
+ __gu_addr = (unsigned long) (ptr); \
+ if (likely(__access_ok(__gu_addr,size))) { \
+ switch (size) { \
+ case 1: __get_user_asm("bu"); break; \
+ case 2: __get_user_asm("hu"); break; \
+ case 4: __get_user_asm("" ); break; \
+ default: __get_user_unknown(); break; \
+ } \
+ } \
+ else { \
+ __gu_err = -EFAULT; \
+ __gu_val = 0; \
+ } \
+ x = (__typeof__(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_asm(INSN) \
+({ \
+ asm volatile( \
+ "1:\n" \
+ " mov"INSN" %2,%1\n" \
+ " mov 0,%0\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3:\n\t" \
+ " mov %3,%0\n" \
+ " jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b, 3b\n" \
+ " .previous" \
+ : "=&r" (__gu_err), "=&r" (__gu_val) \
+ : "m" (__m(__gu_addr)), "i" (-EFAULT)); \
+})
+
+extern int __get_user_unknown(void);
+
+#define __put_user_nocheck(x, ptr, size) \
+({ \
+ union { \
+ __typeof__(*(ptr)) val; \
+ u32 bits[2]; \
+ } __pu_val; \
+ unsigned long __pu_addr; \
+ int __pu_err; \
+ __pu_val.val = (x); \
+ __pu_addr = (unsigned long) (ptr); \
+ switch (size) { \
+ case 1: __put_user_asm("bu"); break; \
+ case 2: __put_user_asm("hu"); break; \
+ case 4: __put_user_asm("" ); break; \
+ case 8: __put_user_asm8(); break; \
+ default: __pu_err = __put_user_unknown(); break; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_check(x, ptr, size) \
+({ \
+ union { \
+ __typeof__(*(ptr)) val; \
+ u32 bits[2]; \
+ } __pu_val; \
+ unsigned long __pu_addr; \
+ int __pu_err; \
+ __pu_val.val = (x); \
+ __pu_addr = (unsigned long) (ptr); \
+ if (likely(__access_ok(__pu_addr, size))) { \
+ switch (size) { \
+ case 1: __put_user_asm("bu"); break; \
+ case 2: __put_user_asm("hu"); break; \
+ case 4: __put_user_asm("" ); break; \
+ case 8: __put_user_asm8(); break; \
+ default: __pu_err = __put_user_unknown(); break; \
+ } \
+ } \
+ else { \
+ __pu_err = -EFAULT; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_asm(INSN) \
+({ \
+ asm volatile( \
+ "1:\n" \
+ " mov"INSN" %1,%2\n" \
+ " mov 0,%0\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3:\n" \
+ " mov %3,%0\n" \
+ " jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b, 3b\n" \
+ " .previous" \
+ : "=&r" (__pu_err) \
+ : "r" (__pu_val.val), "m" (__m(__pu_addr)), \
+ "i" (-EFAULT) \
+ ); \
+})
+
+#define __put_user_asm8() \
+({ \
+ asm volatile( \
+ "1: mov %1,%3 \n" \
+ "2: mov %2,%4 \n" \
+ " mov 0,%0 \n" \
+ "3: \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: \n" \
+ " mov %5,%0 \n" \
+ " jmp 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4 \n" \
+ " .long 1b, 4b \n" \
+ " .long 2b, 4b \n" \
+ " .previous \n" \
+ : "=&r" (__pu_err) \
+ : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]), \
+ "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)), \
+ "i" (-EFAULT) \
+ ); \
+})
+
+extern int __put_user_unknown(void);
+
+
+/*
+ * Copy To/From Userspace
+ */
+/* Generic arbitrary sized copy. */
+#define __copy_user(to, from, size) \
+do { \
+ if (size) { \
+ void *__to = to; \
+ const void *__from = from; \
+ int w; \
+ asm volatile( \
+ "0: movbu (%0),%3;\n" \
+ "1: movbu %3,(%1);\n" \
+ " inc %0;\n" \
+ " inc %1;\n" \
+ " add -1,%2;\n" \
+ " bne 0b;\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ " .previous\n" \
+ : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+ : "0"(__from), "1"(__to), "2"(size) \
+ : "memory"); \
+ } \
+} while (0)
+
+#define __copy_user_zeroing(to, from, size) \
+do { \
+ if (size) { \
+ void *__to = to; \
+ const void *__from = from; \
+ int w; \
+ asm volatile( \
+ "0: movbu (%0),%3;\n" \
+ "1: movbu %3,(%1);\n" \
+ " inc %0;\n" \
+ " inc %1;\n" \
+ " add -1,%2;\n" \
+ " bne 0b;\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3:\n" \
+ " mov %2,%0\n" \
+ " clr %3\n" \
+ "4: movbu %3,(%1);\n" \
+ " inc %1;\n" \
+ " add -1,%2;\n" \
+ " bne 4b;\n" \
+ " mov %0,%2\n" \
+ " jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ " .previous\n" \
+ : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+ : "0"(__from), "1"(__to), "2"(size) \
+ : "memory"); \
+ } \
+} while (0)
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+static inline
+unsigned long __generic_copy_from_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __copy_user_zeroing(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __generic_copy_to_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __copy_user(to, from, n);
+ return n;
+}
+
+
+#if 0
+#error don't use - these macros don't increment to & from pointers
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user(to, from, size) \
+do { \
+ asm volatile( \
+ " mov %0,a0;\n" \
+ "0: movbu (%1),d3;\n" \
+ "1: movbu d3,(%2);\n" \
+ " add -1,a0;\n" \
+ " bne 0b;\n" \
+ "2:;" \
+ ".section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : \
+ : "d"(size), "d"(to), "d"(from) \
+ : "d3", "a0"); \
+} while (0)
+
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user_zeroing(to, from, size) \
+do { \
+ asm volatile( \
+ " mov %0,a0;\n" \
+ "0: movbu (%1),d3;\n" \
+ "1: movbu d3,(%2);\n" \
+ " add -1,a0;\n" \
+ " bne 0b;\n" \
+ "2:;" \
+ ".section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : \
+ : "d"(size), "d"(to), "d"(from) \
+ : "d3", "a0"); \
+} while (0)
+
+static inline
+unsigned long __constant_copy_to_user(void *to, const void *from,
+ unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __constant_copy_user(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user(void *to, const void *from,
+ unsigned long n)
+{
+ if (access_ok(VERIFY_READ, from, n))
+ __constant_copy_user_zeroing(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __constant_copy_to_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __constant_copy_user(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __constant_copy_user_zeroing(to, from, n);
+ return n;
+}
+#endif
+
+extern unsigned long __generic_copy_to_user(void __user *, const void *,
+ unsigned long);
+extern unsigned long __generic_copy_from_user(void *, const void __user *,
+ unsigned long);
+
+#define __copy_to_user_inatomic(to, from, n) \
+ __generic_copy_to_user_nocheck((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+ __generic_copy_from_user_nocheck((to), (from), (n))
+
+#define __copy_to_user(to, from, n) \
+({ \
+ might_sleep(); \
+ __copy_to_user_inatomic((to), (from), (n)); \
+})
+
+#define __copy_from_user(to, from, n) \
+({ \
+ might_sleep(); \
+ __copy_from_user_inatomic((to), (from), (n)); \
+})
+
+
+#define copy_to_user(to, from, n) __generic_copy_to_user((to), (from), (n))
+#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n))
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *str, long n);
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+extern unsigned long clear_user(void __user *mem, unsigned long len);
+extern unsigned long __clear_user(void __user *mem, unsigned long len);
+
+#endif /* _ASM_UACCESS_H */
diff --git a/include/asm-mn10300/ucontext.h b/include/asm-mn10300/ucontext.h
new file mode 100644
index 0000000..fcab5c1
--- /dev/null
+++ b/include/asm-mn10300/ucontext.h
@@ -0,0 +1,22 @@
+/* MN10300 User context
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* _ASM_UCONTEXT_H */
diff --git a/include/asm-mn10300/unaligned.h b/include/asm-mn10300/unaligned.h
new file mode 100644
index 0000000..cad3afb
--- /dev/null
+++ b/include/asm-mn10300/unaligned.h
@@ -0,0 +1,136 @@
+/* MN10300 Unaligned memory access handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNALIGNED_H
+#define _ASM_UNALIGNED_H
+
+#include <asm/types.h>
+
+#if 0
+extern int __bug_unaligned_x(void *ptr);
+
+/*
+ * What is the most efficient way of loading/storing an unaligned value?
+ *
+ * That is the subject of this file. Efficiency here is defined as
+ * minimum code size with minimum register usage for the common cases.
+ * It is currently not believed that long longs are common, so we
+ * trade efficiency for the chars, shorts and longs against the long
+ * longs.
+ *
+ * Current stats with gcc 2.7.2.2 for these functions:
+ *
+ * ptrsize get: code regs put: code regs
+ * 1 1 1 1 2
+ * 2 3 2 3 2
+ * 4 7 3 7 3
+ * 8 20 6 16 6
+ *
+ * gcc 2.95.1 seems to code differently:
+ *
+ * ptrsize get: code regs put: code regs
+ * 1 1 1 1 2
+ * 2 3 2 3 2
+ * 4 7 4 7 4
+ * 8 19 8 15 6
+ *
+ * which may or may not be more efficient (depending upon whether
+ * you can afford the extra registers). Hopefully the gcc 2.95
+ * is inteligent enough to decide if it is better to use the
+ * extra register, but evidence so far seems to suggest otherwise.
+ *
+ * Unfortunately, gcc is not able to optimise the high word
+ * out of long long >> 32, or the low word from long long << 32
+ */
+
+#define __get_unaligned_2(__p) \
+ (__p[0] | __p[1] << 8)
+
+#define __get_unaligned_4(__p) \
+ (__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
+
+#define get_unaligned(ptr) \
+({ \
+ unsigned int __v1, __v2; \
+ __typeof__(*(ptr)) __v; \
+ __u8 *__p = (__u8 *)(ptr); \
+ \
+ switch (sizeof(*(ptr))) { \
+ case 1: __v = *(ptr); break; \
+ case 2: __v = __get_unaligned_2(__p); break; \
+ case 4: __v = __get_unaligned_4(__p); break; \
+ case 8: \
+ __v2 = __get_unaligned_4((__p+4)); \
+ __v1 = __get_unaligned_4(__p); \
+ __v = ((unsigned long long)__v2 << 32 | __v1); \
+ break; \
+ default: __v = __bug_unaligned_x(__p); break; \
+ } \
+ __v; \
+})
+
+
+static inline void __put_unaligned_2(__u32 __v, register __u8 *__p)
+{
+ *__p++ = __v;
+ *__p++ = __v >> 8;
+}
+
+static inline void __put_unaligned_4(__u32 __v, register __u8 *__p)
+{
+ __put_unaligned_2(__v >> 16, __p + 2);
+ __put_unaligned_2(__v, __p);
+}
+
+static inline void __put_unaligned_8(const unsigned long long __v, __u8 *__p)
+{
+ /*
+ * tradeoff: 8 bytes of stack for all unaligned puts (2
+ * instructions), or an extra register in the long long
+ * case - go for the extra register.
+ */
+ __put_unaligned_4(__v >> 32, __p + 4);
+ __put_unaligned_4(__v, __p);
+}
+
+/*
+ * Try to store an unaligned value as efficiently as possible.
+ */
+#define put_unaligned(val, ptr) \
+ ({ \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ *(ptr) = (val); \
+ break; \
+ case 2: \
+ __put_unaligned_2((val), (__u8 *)(ptr)); \
+ break; \
+ case 4: \
+ __put_unaligned_4((val), (__u8 *)(ptr)); \
+ break; \
+ case 8: \
+ __put_unaligned_8((val), (__u8 *)(ptr)); \
+ break; \
+ default: \
+ __bug_unaligned_x(ptr); \
+ break; \
+ } \
+ (void) 0; \
+ })
+
+
+#else
+
+#define get_unaligned(ptr) (*(ptr))
+#define put_unaligned(val, ptr) ({ *(ptr) = (val); (void) 0; })
+
+#endif
+
+#endif
diff --git a/include/asm-mn10300/unistd.h b/include/asm-mn10300/unistd.h
new file mode 100644
index 0000000..3721aa9
--- /dev/null
+++ b/include/asm-mn10300/unistd.h
@@ -0,0 +1,384 @@
+/* MN10300 System call number list
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_lchown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+#define __NR_oldolduname 59
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+#define __NR_profil 98
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+#define __NR_ioperm 101
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+#define __NR_olduname 109
+#define __NR_iopl 110
+#define __NR_vhangup 111
+#define __NR_idle 112
+#define __NR_vm86old 113
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_modify_ldt 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_vm86 166
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_chown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_lchown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_chown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_mincore 218
+#define __NR_madvise 219
+#define __NR_madvise1 219 /* delete when C lib stub is removed */
+#define __NR_getdents64 220
+#define __NR_fcntl64 221
+/* 223 is unused */
+#define __NR_gettid 224
+#define __NR_readahead 225
+#define __NR_setxattr 226
+#define __NR_lsetxattr 227
+#define __NR_fsetxattr 228
+#define __NR_getxattr 229
+#define __NR_lgetxattr 230
+#define __NR_fgetxattr 231
+#define __NR_listxattr 232
+#define __NR_llistxattr 233
+#define __NR_flistxattr 234
+#define __NR_removexattr 235
+#define __NR_lremovexattr 236
+#define __NR_fremovexattr 237
+#define __NR_tkill 238
+#define __NR_sendfile64 239
+#define __NR_futex 240
+#define __NR_sched_setaffinity 241
+#define __NR_sched_getaffinity 242
+#define __NR_set_thread_area 243
+#define __NR_get_thread_area 244
+#define __NR_io_setup 245
+#define __NR_io_destroy 246
+#define __NR_io_getevents 247
+#define __NR_io_submit 248
+#define __NR_io_cancel 249
+#define __NR_fadvise64 250
+
+#define __NR_exit_group 252
+#define __NR_lookup_dcookie 253
+#define __NR_epoll_create 254
+#define __NR_epoll_ctl 255
+#define __NR_epoll_wait 256
+#define __NR_remap_file_pages 257
+#define __NR_set_tid_address 258
+#define __NR_timer_create 259
+#define __NR_timer_settime (__NR_timer_create+1)
+#define __NR_timer_gettime (__NR_timer_create+2)
+#define __NR_timer_getoverrun (__NR_timer_create+3)
+#define __NR_timer_delete (__NR_timer_create+4)
+#define __NR_clock_settime (__NR_timer_create+5)
+#define __NR_clock_gettime (__NR_timer_create+6)
+#define __NR_clock_getres (__NR_timer_create+7)
+#define __NR_clock_nanosleep (__NR_timer_create+8)
+#define __NR_statfs64 268
+#define __NR_fstatfs64 269
+#define __NR_tgkill 270
+#define __NR_utimes 271
+#define __NR_fadvise64_64 272
+#define __NR_vserver 273
+#define __NR_mbind 274
+#define __NR_get_mempolicy 275
+#define __NR_set_mempolicy 276
+#define __NR_mq_open 277
+#define __NR_mq_unlink (__NR_mq_open+1)
+#define __NR_mq_timedsend (__NR_mq_open+2)
+#define __NR_mq_timedreceive (__NR_mq_open+3)
+#define __NR_mq_notify (__NR_mq_open+4)
+#define __NR_mq_getsetattr (__NR_mq_open+5)
+#define __NR_kexec_load 283
+#define __NR_waitid 284
+#define __NR_add_key 286
+#define __NR_request_key 287
+#define __NR_keyctl 288
+#define __NR_cacheflush 289
+#define __NR_ioprio_set 290
+#define __NR_ioprio_get 291
+#define __NR_inotify_init 292
+#define __NR_inotify_add_watch 293
+#define __NR_inotify_rm_watch 294
+#define __NR_migrate_pages 295
+#define __NR_openat 296
+#define __NR_mkdirat 297
+#define __NR_mknodat 298
+#define __NR_fchownat 299
+#define __NR_futimesat 300
+#define __NR_fstatat64 301
+#define __NR_unlinkat 302
+#define __NR_renameat 303
+#define __NR_linkat 304
+#define __NR_symlinkat 305
+#define __NR_readlinkat 306
+#define __NR_fchmodat 307
+#define __NR_faccessat 308
+#define __NR_pselect6 309
+#define __NR_ppoll 310
+#define __NR_unshare 311
+#define __NR_set_robust_list 312
+#define __NR_get_robust_list 313
+#define __NR_splice 314
+#define __NR_sync_file_range 315
+#define __NR_tee 316
+#define __NR_vmsplice 317
+#define __NR_move_pages 318
+#define __NR_getcpu 319
+#define __NR_epoll_pwait 320
+#define __NR_utimensat 321
+#define __NR_signalfd 322
+#define __NR_timerfd_create 323
+#define __NR_eventfd 324
+#define __NR_fallocate 325
+#define __NR_timerfd_settime 326
+#define __NR_timerfd_gettime 327
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 326
+
+/*
+ * specify the deprecated syscalls we want to support on this arch
+ */
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H */
diff --git a/include/asm-mn10300/unit-asb2303/clock.h b/include/asm-mn10300/unit-asb2303/clock.h
new file mode 100644
index 0000000..8b450e9
--- /dev/null
+++ b/include/asm-mn10300/unit-asb2303/clock.h
@@ -0,0 +1,45 @@
+/* ASB2303-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK 33333333UL
+/* #define MN10300_IOBCLK 66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK MN10300_IOCLK
+#define MN10300_TSCCLK MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/include/asm-mn10300/unit-asb2303/leds.h b/include/asm-mn10300/unit-asb2303/leds.h
new file mode 100644
index 0000000..3a7543e
--- /dev/null
+++ b/include/asm-mn10300/unit-asb2303/leds.h
@@ -0,0 +1,43 @@
+/* ASB2303-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32)
+#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+
+/* flip the 7-segment LEDs between "G" and "-" */
+#define mn10300_set_gdbleds(ONOFF) \
+do { \
+ ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \
+} while (0)
+
+/* indicate double-fault by displaying "d" on the LEDs */
+#define mn10300_set_dbfleds \
+ mov 0x43,d0 ; \
+ movbu d0,(ASB2303_7SEGLEDS)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code code);
+extern void peripheral_leds_led_chase(void);
+extern void debug_to_serial(const char *p, int n);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/include/asm-mn10300/unit-asb2303/serial.h b/include/asm-mn10300/unit-asb2303/serial.h
new file mode 100644
index 0000000..0d55cf5
--- /dev/null
+++ b/include/asm-mn10300/unit-asb2303/serial.h
@@ -0,0 +1,136 @@
+/* ASB2303-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
+#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000
+
+#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ }, \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define LSR_WAIT_FOR(STATE) \
+do { \
+ while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE) \
+do { \
+ while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \
+} while (0)
+#define FLOWCTL_CLEAR(LINE) \
+do { \
+ GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE) \
+do { \
+ GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ for (; n > 0; n--) {
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+
+ ch = *p++;
+ if (ch == 0x0a) {
+ GDBPORT_SERIAL_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+ }
+ GDBPORT_SERIAL_TX = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/include/asm-mn10300/unit-asb2303/smc91111.h b/include/asm-mn10300/unit-asb2303/smc91111.h
new file mode 100644
index 0000000..dd456e9
--- /dev/null
+++ b/include/asm-mn10300/unit-asb2303/smc91111.h
@@ -0,0 +1,50 @@
+/* Support for the SMC91C111 NIC on an ASB2303
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SMC91111_H
+#define _ASM_UNIT_SMC91111_H
+
+#include <asm/intctl-regs.h>
+
+#define SMC91111_BASE 0xAA000300UL
+#define SMC91111_BASE_END 0xAA000400UL
+#define SMC91111_IRQ XIRQ3
+
+#define SMC_CAN_USE_8BIT 0
+#define SMC_CAN_USE_16BIT 1
+#define SMC_CAN_USE_32BIT 0
+#define SMC_NOWAIT 1
+#define SMC_IRQ_FLAGS (0)
+
+#if SMC_CAN_USE_8BIT
+#define SMC_inb(a, r) inb((unsigned long) ((a) + (r)))
+#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r)))
+#endif
+
+#if SMC_CAN_USE_16BIT
+#define SMC_inw(a, r) inw((unsigned long) ((a) + (r)))
+#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r)))
+#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#if SMC_CAN_USE_32BIT
+#define SMC_inl(a, r) inl((unsigned long) ((a) + (r)))
+#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r)))
+#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#define RPC_LSA_DEFAULT RPC_LED_100_10
+#define RPC_LSB_DEFAULT RPC_LED_TX_RX
+
+#define set_irq_type(irq, type)
+
+#endif /* _ASM_UNIT_SMC91111_H */
diff --git a/include/asm-mn10300/unit-asb2303/timex.h b/include/asm-mn10300/unit-asb2303/timex.h
new file mode 100644
index 0000000..7e54b0cf
--- /dev/null
+++ b/include/asm-mn10300/unit-asb2303/timex.h
@@ -0,0 +1,135 @@
+/* ASB2303-specific timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/timer-regs.h>
+#include <asm/unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX 0xffff
+#define TMJCBC TM01BC
+
+#define TMJCMD TM01MD
+#define TMJCBR TM01BR
+#define TMJCIRQ TM1IRQ
+#define TMJCICR TM1ICR
+#define TMJCICR_LEVEL GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+ unsigned rate;
+ u16 md, t16;
+
+ /* use as little prescaling as possible to avoid losing accuracy */
+ md = TM0MD_SRC_IOCLK;
+ rate = MN10300_JCCLK / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_8;
+ rate = MN10300_JCCLK / 8 / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_32;
+ rate = MN10300_JCCLK / 32 / HZ;
+
+ if (rate > TMJCBR_MAX)
+ BUG();
+ }
+ }
+
+ TMJCBR = rate - 1;
+ t16 = TMJCBR;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_INIT_COUNTER |
+ TM1MD_INIT_COUNTER << 8;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_COUNT_ENABLE |
+ TM1MD_COUNT_ENABLE << 8;
+
+ t16 = TMJCMD;
+
+ TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX 0xffffffff
+#define TMTSCBC TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+ /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+ * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+ */
+ TM45BR = TMTSCBR_MAX;
+
+ TM4MD = TM4MD_SRC_IOCLK;
+ TM4MD |= TM4MD_INIT_COUNTER;
+ TM4MD &= ~TM4MD_INIT_COUNTER;
+ TM4ICR = 0;
+
+ TM5MD = TM5MD_SRC_TM4CASCADE;
+ TM5MD |= TM5MD_INIT_COUNTER;
+ TM5MD &= ~TM5MD_INIT_COUNTER;
+ TM5ICR = 0;
+
+ TM5MD |= TM5MD_COUNT_ENABLE;
+ TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+ TM4MD = 0;
+ TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+ return (cycles_t)TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/include/asm-mn10300/unit-asb2305/clock.h b/include/asm-mn10300/unit-asb2305/clock.h
new file mode 100644
index 0000000..7d51484
--- /dev/null
+++ b/include/asm-mn10300/unit-asb2305/clock.h
@@ -0,0 +1,45 @@
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK 33333333UL
+/* #define MN10300_IOBCLK 66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK MN10300_IOCLK
+#define MN10300_TSCCLK MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/include/asm-mn10300/unit-asb2305/leds.h b/include/asm-mn10300/unit-asb2305/leds.h
new file mode 100644
index 0000000..bc471f6
--- /dev/null
+++ b/include/asm-mn10300/unit-asb2305/leds.h
@@ -0,0 +1,51 @@
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset() \
+do { \
+ P0OUT &= 0xbf; \
+ P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds \
+ mov 0x43077f1d,d0 ; \
+ mov d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF) \
+do { \
+ ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/include/asm-mn10300/unit-asb2305/serial.h b/include/asm-mn10300/unit-asb2305/serial.h
new file mode 100644
index 0000000..73d31d6
--- /dev/null
+++ b/include/asm-mn10300/unit-asb2305/serial.h
@@ -0,0 +1,120 @@
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
+#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE) \
+do { \
+ while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE) \
+do { \
+ while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \
+} while (0)
+#define FLOWCTL_CLEAR(LINE) \
+do { \
+ TTYS0_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE) \
+do { \
+ TTYS0_MCR |= UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ for (; n > 0; n--) {
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+
+ ch = *p++;
+ if (ch == 0x0a) {
+ TTYS0_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+ }
+ TTYS0_TX = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/include/asm-mn10300/unit-asb2305/timex.h b/include/asm-mn10300/unit-asb2305/timex.h
new file mode 100644
index 0000000..10e1bfe3
--- /dev/null
+++ b/include/asm-mn10300/unit-asb2305/timex.h
@@ -0,0 +1,135 @@
+/* ASB2305 timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/cpu/timer-regs.h>
+#include <asm/unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX 0xffff
+#define TMJCBC TM01BC
+
+#define TMJCMD TM01MD
+#define TMJCBR TM01BR
+#define TMJCIRQ TM1IRQ
+#define TMJCICR TM1ICR
+#define TMJCICR_LEVEL GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+ unsigned rate;
+ u16 md, t16;
+
+ /* use as little prescaling as possible to avoid losing accuracy */
+ md = TM0MD_SRC_IOCLK;
+ rate = MN10300_JCCLK / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_8;
+ rate = MN10300_JCCLK / 8 / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_32;
+ rate = MN10300_JCCLK / 32 / HZ;
+
+ if (rate > TMJCBR_MAX)
+ BUG();
+ }
+ }
+
+ TMJCBR = rate - 1;
+ t16 = TMJCBR;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_INIT_COUNTER |
+ TM1MD_INIT_COUNTER << 8;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_COUNT_ENABLE |
+ TM1MD_COUNT_ENABLE << 8;
+
+ t16 = TMJCMD;
+
+ TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX 0xffffffff
+#define TMTSCBC TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+ /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+ * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+ */
+ TM45BR = TMTSCBR_MAX;
+
+ TM4MD = TM4MD_SRC_IOCLK;
+ TM4MD |= TM4MD_INIT_COUNTER;
+ TM4MD &= ~TM4MD_INIT_COUNTER;
+ TM4ICR = 0;
+
+ TM5MD = TM5MD_SRC_TM4CASCADE;
+ TM5MD |= TM5MD_INIT_COUNTER;
+ TM5MD &= ~TM5MD_INIT_COUNTER;
+ TM5ICR = 0;
+
+ TM5MD |= TM5MD_COUNT_ENABLE;
+ TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+ TM4MD = 0;
+ TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+ return (cycles_t) TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/include/asm-mn10300/user.h b/include/asm-mn10300/user.h
new file mode 100644
index 0000000..e119390
--- /dev/null
+++ b/include/asm-mn10300/user.h
@@ -0,0 +1,53 @@
+/* MN10300 User process data
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <linux/ptrace.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * When the kernel dumps core, it starts by dumping the user struct - this will
+ * be used by gdb to figure out where the data and stack segments are within
+ * the file, and what virtual addresses to use.
+ */
+struct user {
+ /* We start with the registers, to mimic the way that "memory" is
+ * returned from the ptrace(3,...) function.
+ */
+ struct pt_regs regs; /* Where the registers are actually stored */
+
+ /* The rest of this junk is to help gdb figure out what goes where */
+ unsigned long int u_tsize; /* Text segment size (pages). */
+ unsigned long int u_dsize; /* Data segment size (pages). */
+ unsigned long int u_ssize; /* Stack segment size (pages). */
+ unsigned long start_code; /* Starting virtual address of text. */
+ unsigned long start_stack; /* Starting virtual address of stack area.
+ This is actually the bottom of the stack,
+ the top of the stack is always found in the
+ esp register. */
+ long int signal; /* Signal that caused the core dump. */
+ int reserved; /* No longer used */
+ struct user_pt_regs *u_ar0; /* Used by gdb to help find the values for */
+
+ /* the registers */
+ unsigned long magic; /* To uniquely identify a core file */
+ char u_comm[32]; /* User command that was responsible */
+};
+#endif
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR +(u.start_code)
+#define HOST_STACK_END_ADDR +(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_USER_H */
diff --git a/include/asm-mn10300/vga.h b/include/asm-mn10300/vga.h
new file mode 100644
index 0000000..0163e50
--- /dev/null
+++ b/include/asm-mn10300/vga.h
@@ -0,0 +1,17 @@
+/* MN10300 VGA register definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+
+
+#endif /* _ASM_VGA_H */
diff --git a/include/asm-mn10300/xor.h b/include/asm-mn10300/xor.h
new file mode 100644
index 0000000..c82eb12
--- /dev/null
+++ b/include/asm-mn10300/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/include/asm-parisc/a.out.h b/include/asm-parisc/a.out.h
index 23e2c90..eb04e34 100644
--- a/include/asm-parisc/a.out.h
+++ b/include/asm-parisc/a.out.h
@@ -17,14 +17,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-
-/* XXX: STACK_TOP actually should be STACK_BOTTOM for parisc.
- * prumpf */
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX DEFAULT_TASK_SIZE
-
-#endif
-
#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-parisc/page.h b/include/asm-parisc/page.h
index b08d915..27d50b8 100644
--- a/include/asm-parisc/page.h
+++ b/include/asm-parisc/page.h
@@ -91,6 +91,7 @@
#endif /* STRICT_MM_TYPECHECKS */
+typedef struct page *pgtable_t;
typedef struct __physmem_range {
unsigned long start_pfn;
diff --git a/include/asm-parisc/pgalloc.h b/include/asm-parisc/pgalloc.h
index aab66f1..3996dfc 100644
--- a/include/asm-parisc/pgalloc.h
+++ b/include/asm-parisc/pgalloc.h
@@ -115,11 +115,14 @@
#define pmd_populate(mm, pmd, pte_page) \
pmd_populate_kernel(mm, pmd, page_address(pte_page))
+#define pmd_pgtable(pmd) pmd_page(pmd)
-static inline struct page *
+static inline pgtable_t
pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
struct page *page = alloc_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ if (page)
+ pgtable_page_ctor(page);
return page;
}
@@ -135,7 +138,11 @@
free_page((unsigned long)pte);
}
-#define pte_free(mm, page) pte_free_kernel(page_address(page))
+static inline void pte_free_kernel(struct mm_struct *mm, struct page *pte)
+{
+ pgtable_page_dtor(pte);
+ pte_free_kernel(page_address((pte));
+}
#define check_pgt_cache() do { } while (0)
diff --git a/include/asm-parisc/posix_types.h b/include/asm-parisc/posix_types.h
index b634e3c..bb725a6 100644
--- a/include/asm-parisc/posix_types.h
+++ b/include/asm-parisc/posix_types.h
@@ -47,18 +47,14 @@
typedef unsigned int __kernel_old_dev_t;
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
/* compatibility stuff */
typedef __kernel_uid_t __kernel_old_uid_t;
typedef __kernel_gid_t __kernel_old_gid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
@@ -128,6 +124,6 @@
}
}
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif
diff --git a/include/asm-parisc/processor.h b/include/asm-parisc/processor.h
index 3bb06e8..3c9d348 100644
--- a/include/asm-parisc/processor.h
+++ b/include/asm-parisc/processor.h
@@ -47,6 +47,16 @@
#define DEFAULT_MAP_BASE DEFAULT_MAP_BASE32
#endif
+#ifdef __KERNEL__
+
+/* XXX: STACK_TOP actually should be STACK_BOTTOM for parisc.
+ * prumpf */
+
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX DEFAULT_TASK_SIZE
+
+#endif
+
#ifndef __ASSEMBLY__
/*
diff --git a/include/asm-powerpc/a.out.h b/include/asm-powerpc/a.out.h
index 5c5ea83..89cead6 100644
--- a/include/asm-powerpc/a.out.h
+++ b/include/asm-powerpc/a.out.h
@@ -17,23 +17,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-#ifdef __powerpc64__
-
-#define STACK_TOP_USER64 TASK_SIZE_USER64
-#define STACK_TOP_USER32 TASK_SIZE_USER32
-
-#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
- STACK_TOP_USER32 : STACK_TOP_USER64)
-
-#define STACK_TOP_MAX STACK_TOP_USER64
-
-#else /* __powerpc64__ */
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-#endif /* __powerpc64__ */
-#endif /* __KERNEL__ */
-
#endif /* _ASM_POWERPC_A_OUT_H */
diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h
index 61e3725..df47bbb 100644
--- a/include/asm-powerpc/page.h
+++ b/include/asm-powerpc/page.h
@@ -190,6 +190,8 @@
struct vm_area_struct;
+typedef struct page *pgtable_t;
+
#include <asm-generic/memory_model.h>
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-powerpc/pgalloc-32.h b/include/asm-powerpc/pgalloc-32.h
index c162a4c..58c0714 100644
--- a/include/asm-powerpc/pgalloc-32.h
+++ b/include/asm-powerpc/pgalloc-32.h
@@ -22,17 +22,19 @@
(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
#define pmd_populate(mm, pmd, pte) \
(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+#define pmd_pgtable(pmd) pmd_page(pmd)
#else
#define pmd_populate_kernel(mm, pmd, pte) \
(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
#define pmd_populate(mm, pmd, pte) \
(pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
+#define pmd_pgtable(pmd) pmd_page(pmd)
#endif
extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
-extern struct page *pte_alloc_one(struct mm_struct *mm, unsigned long addr);
+extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte);
-extern void pte_free(struct mm_struct *mm, struct page *pte);
+extern void pte_free(struct mm_struct *mm, pgtable_t pte);
#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
diff --git a/include/asm-powerpc/pgalloc-64.h b/include/asm-powerpc/pgalloc-64.h
index 5afae85..6898099 100644
--- a/include/asm-powerpc/pgalloc-64.h
+++ b/include/asm-powerpc/pgalloc-64.h
@@ -58,6 +58,7 @@
#define pmd_populate(mm, pmd, pte_page) \
pmd_populate_kernel(mm, pmd, page_address(pte_page))
#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte))
+#define pmd_pgtable(pmd) pmd_page(pmd)
#else /* CONFIG_PPC_64K_PAGES */
@@ -72,6 +73,7 @@
#define pmd_populate(mm, pmd, pte_page) \
pmd_populate_kernel(mm, pmd, page_address(pte_page))
+#define pmd_pgtable(pmd) pmd_page(pmd)
#endif /* CONFIG_PPC_64K_PAGES */
@@ -92,11 +94,18 @@
return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
}
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
- unsigned long address)
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
{
- pte_t *pte = pte_alloc_one_kernel(mm, address);
- return pte ? virt_to_page(pte) : NULL;
+ struct page *page;
+ pte_t *pte;
+
+ pte = pte_alloc_one_kernel(mm, address);
+ if (!pte)
+ return NULL;
+ page = virt_to_page(pte);
+ pgtable_page_ctor(page);
+ return page;
}
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
@@ -104,8 +113,9 @@
free_page((unsigned long)pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *ptepage)
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
{
+ pgtable_page_dtor(ptepage);
__free_page(ptepage);
}
@@ -136,9 +146,12 @@
extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
-#define __pte_free_tlb(tlb, ptepage) \
+#define __pte_free_tlb(tlb,ptepage) \
+do { \
+ pgtable_page_dtor(ptepage); \
pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
- PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1))
+ PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+} while (0)
#define __pmd_free_tlb(tlb, pmd) \
pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
diff --git a/include/asm-powerpc/posix_types.h b/include/asm-powerpc/posix_types.h
index 2f2288f..c4e396b 100644
--- a/include/asm-powerpc/posix_types.h
+++ b/include/asm-powerpc/posix_types.h
@@ -64,8 +64,7 @@
#else /* __GNUC__ */
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
- || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
+#if defined(__KERNEL__)
/* With GNU C, use inline functions instead so args are evaluated only once: */
#undef __FD_SET
@@ -124,6 +123,6 @@
}
}
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif /* __GNUC__ */
#endif /* _ASM_POWERPC_POSIX_TYPES_H */
diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h
index 1f4765d..fd98ca9 100644
--- a/include/asm-powerpc/processor.h
+++ b/include/asm-powerpc/processor.h
@@ -113,6 +113,25 @@
TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
#endif
+#ifdef __KERNEL__
+#ifdef __powerpc64__
+
+#define STACK_TOP_USER64 TASK_SIZE_USER64
+#define STACK_TOP_USER32 TASK_SIZE_USER32
+
+#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
+ STACK_TOP_USER32 : STACK_TOP_USER64)
+
+#define STACK_TOP_MAX STACK_TOP_USER64
+
+#else /* __powerpc64__ */
+
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+
+#endif /* __powerpc64__ */
+#endif /* __KERNEL__ */
+
typedef struct {
unsigned long seg;
} mm_segment_t;
diff --git a/include/asm-ppc/pgalloc.h b/include/asm-ppc/pgalloc.h
index 7c39a95..fd4d1d7 100644
--- a/include/asm-ppc/pgalloc.h
+++ b/include/asm-ppc/pgalloc.h
@@ -23,17 +23,19 @@
(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
#define pmd_populate(mm, pmd, pte) \
(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+#define pmd_pgtable(pmd) pmd_page(pmd)
#else
#define pmd_populate_kernel(mm, pmd, pte) \
(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
#define pmd_populate(mm, pmd, pte) \
(pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
+#define pmd_pgtable(pmd) pmd_page(pmd)
#endif
extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
-extern struct page *pte_alloc_one(struct mm_struct *mm, unsigned long addr);
+extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte);
-extern void pte_free(struct mm_struct *mm, struct page *pte);
+extern void pte_free(struct mm_struct *mm, pgtable_t pte);
#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
diff --git a/include/asm-s390/a.out.h b/include/asm-s390/a.out.h
index 46158dc..8d6bd9c 100644
--- a/include/asm-s390/a.out.h
+++ b/include/asm-s390/a.out.h
@@ -29,11 +29,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX DEFAULT_TASK_SIZE
-
-#endif
-
#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-s390/ioctls.h b/include/asm-s390/ioctls.h
index 07e19b2..40e481b 100644
--- a/include/asm-s390/ioctls.h
+++ b/include/asm-s390/ioctls.h
@@ -54,6 +54,10 @@
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
diff --git a/include/asm-s390/page.h b/include/asm-s390/page.h
index a55f9d9..7f29a98 100644
--- a/include/asm-s390/page.h
+++ b/include/asm-s390/page.h
@@ -109,6 +109,8 @@
#endif /* __s390x__ */
+typedef struct page *pgtable_t;
+
#define __pte(x) ((pte_t) { (x) } )
#define __pmd(x) ((pmd_t) { (x) } )
#define __pgd(x) ((pgd_t) { (x) } )
diff --git a/include/asm-s390/pgalloc.h b/include/asm-s390/pgalloc.h
index 6f6619b..900d448 100644
--- a/include/asm-s390/pgalloc.h
+++ b/include/asm-s390/pgalloc.h
@@ -132,7 +132,7 @@
}
static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *page)
+pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
{
pte_t *pte = (pte_t *)page_to_phys(page);
pmd_t *shadow_pmd = get_shadow_table(pmd);
@@ -142,6 +142,7 @@
if (shadow_pmd && shadow_pte)
pmd_populate_kernel(mm, shadow_pmd, shadow_pte);
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
/*
* page table entry allocation/free routines.
diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h
index 4f74460..e878563 100644
--- a/include/asm-s390/processor.h
+++ b/include/asm-s390/processor.h
@@ -78,6 +78,13 @@
#endif /* __s390x__ */
+#ifdef __KERNEL__
+
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX DEFAULT_TASK_SIZE
+
+#endif
+
#define HAVE_ARCH_PICK_MMAP_LAYOUT
typedef struct {
@@ -161,6 +168,7 @@
/* Forward declaration, a strange C thing */
struct task_struct;
struct mm_struct;
+struct seq_file;
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
@@ -177,7 +185,7 @@
/*
* Print register of task into buffer. Used in fs/proc/array.c.
*/
-extern char *task_show_regs(struct task_struct *task, char *buffer);
+extern void task_show_regs(struct seq_file *m, struct task_struct *task);
extern void show_registers(struct pt_regs *regs);
extern void show_code(struct pt_regs *regs);
diff --git a/include/asm-s390/termbits.h b/include/asm-s390/termbits.h
index 811b9a9..58731853 100644
--- a/include/asm-s390/termbits.h
+++ b/include/asm-s390/termbits.h
@@ -148,6 +148,7 @@
#define HUPCL 0002000
#define CLOCAL 0004000
#define CBAUDEX 0010000
+#define BOTHER 0010000
#define B57600 0010001
#define B115200 0010002
#define B230400 0010003
@@ -163,10 +164,12 @@
#define B3000000 0010015
#define B3500000 0010016
#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CIBAUD 002003600000 /* input baud rate */
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
/* c_lflag bits */
#define ISIG 0000001
#define ICANON 0000002
diff --git a/include/asm-s390/termios.h b/include/asm-s390/termios.h
index a3480e2..67f6627 100644
--- a/include/asm-s390/termios.h
+++ b/include/asm-s390/termios.h
@@ -57,6 +57,9 @@
*/
#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+
#include <asm-generic/termios.h>
#endif /* __KERNEL__ */
diff --git a/include/asm-s390/tlb.h b/include/asm-s390/tlb.h
index 985de2b..3c8177f 100644
--- a/include/asm-s390/tlb.h
+++ b/include/asm-s390/tlb.h
@@ -95,7 +95,7 @@
* pte_free_tlb frees a pte table and clears the CRSTE for the
* page table from the tlb.
*/
-static inline void pte_free_tlb(struct mmu_gather *tlb, struct page *page)
+static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
{
if (!tlb->fullmm) {
tlb->array[tlb->nr_ptes++] = page;
diff --git a/include/asm-sh/a.out.h b/include/asm-sh/a.out.h
index 685d0f6..1f93130 100644
--- a/include/asm-sh/a.out.h
+++ b/include/asm-sh/a.out.h
@@ -17,11 +17,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
-#endif
-
#endif /* __ASM_SH_A_OUT_H */
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
index e0fe029..134562d 100644
--- a/include/asm-sh/page.h
+++ b/include/asm-sh/page.h
@@ -100,6 +100,8 @@
#define __pgd(x) ((pgd_t) { (x) } )
#define __pgprot(x) ((pgprot_t) { (x) } )
+typedef struct page *pgtable_t;
+
#endif /* !__ASSEMBLY__ */
/*
diff --git a/include/asm-sh/pgalloc.h b/include/asm-sh/pgalloc.h
index 59ca16d..84dd2db 100644
--- a/include/asm-sh/pgalloc.h
+++ b/include/asm-sh/pgalloc.h
@@ -14,10 +14,11 @@
}
static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
- struct page *pte)
+ pgtable_t pte)
{
set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
static inline void pgd_ctor(void *x)
{
@@ -47,11 +48,18 @@
return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
}
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
- unsigned long address)
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
{
- void *pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
- return pg ? virt_to_page(pg) : NULL;
+ struct page *page;
+ void *pg;
+
+ pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+ if (!pg)
+ return NULL;
+ page = virt_to_page(pg);
+ pgtable_page_ctor(page);
+ return page;
}
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
@@ -59,12 +67,17 @@
quicklist_free(QUICK_PT, NULL, pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
quicklist_free_page(QUICK_PT, NULL, pte);
}
-#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb), (pte)); \
+} while (0)
/*
* allocating and freeing a pmd is trivial: the 1-entry pmd is
diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h
index a7edaa1..df2d5b0 100644
--- a/include/asm-sh/processor_32.h
+++ b/include/asm-sh/processor_32.h
@@ -50,6 +50,9 @@
*/
#define TASK_SIZE 0x7c000000UL
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h
index 99c22b1..eda4bef 100644
--- a/include/asm-sh/processor_64.h
+++ b/include/asm-sh/processor_64.h
@@ -83,6 +83,9 @@
*/
#define TASK_SIZE 0x7ffff000UL
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
diff --git a/include/asm-sparc/a.out-core.h b/include/asm-sparc/a.out-core.h
new file mode 100644
index 0000000..e8fd338
--- /dev/null
+++ b/include/asm-sparc/a.out-core.h
@@ -0,0 +1,52 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+ unsigned long first_stack_page;
+
+ dump->magic = SUNOS_CORE_MAGIC;
+ dump->len = sizeof(struct user);
+ dump->regs.psr = regs->psr;
+ dump->regs.pc = regs->pc;
+ dump->regs.npc = regs->npc;
+ dump->regs.y = regs->y;
+ /* fuck me plenty */
+ memcpy(&dump->regs.regs[0], ®s->u_regs[1], (sizeof(unsigned long) * 15));
+ dump->uexec = current->thread.core_exec;
+ dump->u_tsize = (((unsigned long) current->mm->end_code) -
+ ((unsigned long) current->mm->start_code)) & ~(PAGE_SIZE - 1);
+ dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1)));
+ dump->u_dsize -= dump->u_tsize;
+ dump->u_dsize &= ~(PAGE_SIZE - 1);
+ first_stack_page = (regs->u_regs[UREG_FP] & ~(PAGE_SIZE - 1));
+ dump->u_ssize = (TASK_SIZE - first_stack_page) & ~(PAGE_SIZE - 1);
+ memcpy(&dump->fpu.fpstatus.fregs.regs[0], ¤t->thread.float_regs[0], (sizeof(unsigned long) * 32));
+ dump->fpu.fpstatus.fsr = current->thread.fsr;
+ dump->fpu.fpstatus.flags = dump->fpu.fpstatus.extra = 0;
+ dump->fpu.fpstatus.fpq_count = current->thread.fpqdepth;
+ memcpy(&dump->fpu.fpstatus.fpq[0], ¤t->thread.fpqueue[0],
+ ((sizeof(unsigned long) * 2) * 16));
+ dump->sigcode = 0;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
diff --git a/include/asm-sparc/a.out.h b/include/asm-sparc/a.out.h
index 917e042..744cfe6c0 100644
--- a/include/asm-sparc/a.out.h
+++ b/include/asm-sparc/a.out.h
@@ -87,13 +87,4 @@
#define N_RELOCATION_INFO_DECLARED 1
-#ifdef __KERNEL__
-
-#include <asm/page.h>
-
-#define STACK_TOP (PAGE_OFFSET - PAGE_SIZE)
-#define STACK_TOP_MAX STACK_TOP
-
-#endif /* __KERNEL__ */
-
#endif /* __SPARC_A_OUT_H__ */
diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h
index cbc48c0..39ccf2d 100644
--- a/include/asm-sparc/page.h
+++ b/include/asm-sparc/page.h
@@ -123,6 +123,8 @@
#endif
+typedef struct page *pgtable_t;
+
extern unsigned long sparc_unmapped_base;
BTFIXUPDEF_SETHI(sparc_unmapped_base)
diff --git a/include/asm-sparc/param.h b/include/asm-sparc/param.h
index beaf02d..86ba59a 100644
--- a/include/asm-sparc/param.h
+++ b/include/asm-sparc/param.h
@@ -3,7 +3,7 @@
#define _ASMSPARC_PARAM_H
#ifdef __KERNEL__
-# define HZ 100 /* Internal kernel timer frequency */
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ)
#endif
diff --git a/include/asm-sparc/pgalloc.h b/include/asm-sparc/pgalloc.h
index b5fbdd3..6292cd0 100644
--- a/include/asm-sparc/pgalloc.h
+++ b/include/asm-sparc/pgalloc.h
@@ -50,10 +50,11 @@
BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
#define pmd_populate(MM, PMD, PTE) BTFIXUP_CALL(pmd_populate)(PMD, PTE)
+#define pmd_pgtable(pmd) pmd_page(pmd)
BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *)
#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE)
-BTFIXUPDEF_CALL(struct page *, pte_alloc_one, struct mm_struct *, unsigned long)
+BTFIXUPDEF_CALL(pgtable_t , pte_alloc_one, struct mm_struct *, unsigned long)
#define pte_alloc_one(mm, address) BTFIXUP_CALL(pte_alloc_one)(mm, address)
BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long)
#define pte_alloc_one_kernel(mm, addr) BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr)
@@ -61,7 +62,7 @@
BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
#define pte_free_kernel(mm, pte) BTFIXUP_CALL(free_pte_fast)(pte)
-BTFIXUPDEF_CALL(void, pte_free, struct page *)
+BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte)
#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
diff --git a/include/asm-sparc/posix_types.h b/include/asm-sparc/posix_types.h
index 62c8fa7..dcc07eb 100644
--- a/include/asm-sparc/posix_types.h
+++ b/include/asm-sparc/posix_types.h
@@ -39,14 +39,10 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
@@ -117,6 +113,6 @@
}
}
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */
diff --git a/include/asm-sparc/processor.h b/include/asm-sparc/processor.h
index 6fbb3f0..40b1e41 100644
--- a/include/asm-sparc/processor.h
+++ b/include/asm-sparc/processor.h
@@ -33,6 +33,10 @@
* we can make our access_ok test faster
*/
#define TASK_SIZE PAGE_OFFSET
+#ifdef __KERNEL__
+#define STACK_TOP (PAGE_OFFSET - PAGE_SIZE)
+#define STACK_TOP_MAX STACK_TOP
+#endif /* __KERNEL__ */
struct task_struct;
diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h
index 3cf132e..366b116 100644
--- a/include/asm-sparc/uaccess.h
+++ b/include/asm-sparc/uaccess.h
@@ -13,7 +13,6 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <asm/vac-ops.h>
-#include <asm/a.out.h>
#endif
#ifndef __ASSEMBLY__
diff --git a/include/asm-sparc64/a.out-core.h b/include/asm-sparc64/a.out-core.h
new file mode 100644
index 0000000..3499b3c
--- /dev/null
+++ b/include/asm-sparc64/a.out-core.h
@@ -0,0 +1,31 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+ /* Only should be used for SunOS and ancient a.out
+ * SparcLinux binaries... Not worth implementing.
+ */
+ memset(dump, 0, sizeof(struct user));
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
diff --git a/include/asm-sparc64/a.out.h b/include/asm-sparc64/a.out.h
index 902e07f..53c95bd 100644
--- a/include/asm-sparc64/a.out.h
+++ b/include/asm-sparc64/a.out.h
@@ -93,18 +93,6 @@
#define N_RELOCATION_INFO_DECLARED 1
-#ifdef __KERNEL__
-
-#define STACK_TOP32 ((1UL << 32UL) - PAGE_SIZE)
-#define STACK_TOP64 (0x0000080000000000UL - (1UL << 32UL))
-
-#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
- STACK_TOP32 : STACK_TOP64)
-
-#define STACK_TOP_MAX STACK_TOP64
-
-#endif
-
#endif /* !(__ASSEMBLY__) */
#endif /* !(__SPARC64_A_OUT_H__) */
diff --git a/include/asm-sparc64/page.h b/include/asm-sparc64/page.h
index cdf950e..e93a482 100644
--- a/include/asm-sparc64/page.h
+++ b/include/asm-sparc64/page.h
@@ -104,6 +104,8 @@
#endif /* (STRICT_MM_TYPECHECKS) */
+typedef struct page *pgtable_t;
+
#define TASK_UNMAPPED_BASE (test_thread_flag(TIF_32BIT) ? \
(_AC(0x0000000070000000,UL)) : \
(_AC(0xfffff80000000000,UL) + (1UL << 32UL)))
diff --git a/include/asm-sparc64/pgalloc.h b/include/asm-sparc64/pgalloc.h
index b48f73c..3ee2d40 100644
--- a/include/asm-sparc64/pgalloc.h
+++ b/include/asm-sparc64/pgalloc.h
@@ -43,11 +43,18 @@
return quicklist_alloc(0, GFP_KERNEL, NULL);
}
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
- unsigned long address)
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
{
- void *pg = quicklist_alloc(0, GFP_KERNEL, NULL);
- return pg ? virt_to_page(pg) : NULL;
+ struct page *page;
+ void *pg;
+
+ pg = quicklist_alloc(0, GFP_KERNEL, NULL);
+ if (!pg)
+ return NULL;
+ page = virt_to_page(pg);
+ pgtable_page_ctor(page);
+ return page;
}
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
@@ -55,8 +62,9 @@
quicklist_free(0, NULL, pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *ptepage)
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
{
+ pgtable_page_dtor(ptepage);
quicklist_free_page(0, NULL, ptepage);
}
@@ -64,6 +72,7 @@
#define pmd_populate_kernel(MM, PMD, PTE) pmd_set(PMD, PTE)
#define pmd_populate(MM,PMD,PTE_PAGE) \
pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE))
+#define pmd_pgtable(pmd) pmd_page(pmd)
static inline void check_pgt_cache(void)
{
diff --git a/include/asm-sparc64/posix_types.h b/include/asm-sparc64/posix_types.h
index 3426a65..4eaaa01 100644
--- a/include/asm-sparc64/posix_types.h
+++ b/include/asm-sparc64/posix_types.h
@@ -43,14 +43,10 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
@@ -121,6 +117,6 @@
}
}
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif /* !(__ARCH_SPARC64_POSIX_TYPES_H) */
diff --git a/include/asm-sparc64/processor.h b/include/asm-sparc64/processor.h
index 66dd2fa..8da484c 100644
--- a/include/asm-sparc64/processor.h
+++ b/include/asm-sparc64/processor.h
@@ -14,7 +14,6 @@
#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
#include <asm/asi.h>
-#include <asm/a.out.h>
#include <asm/pstate.h>
#include <asm/ptrace.h>
#include <asm/page.h>
@@ -36,7 +35,19 @@
#else
#define VPTE_SIZE (1 << (VA_BITS - PAGE_SHIFT + 3))
#endif
+
#define TASK_SIZE ((unsigned long)-VPTE_SIZE)
+#ifdef __KERNEL__
+
+#define STACK_TOP32 ((1UL << 32UL) - PAGE_SIZE)
+#define STACK_TOP64 (0x0000080000000000UL - (1UL << 32UL))
+
+#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
+ STACK_TOP32 : STACK_TOP64)
+
+#define STACK_TOP_MAX STACK_TOP64
+
+#endif
#ifndef __ASSEMBLY__
diff --git a/include/asm-sparc64/uaccess.h b/include/asm-sparc64/uaccess.h
index 93720e7..d8547b8 100644
--- a/include/asm-sparc64/uaccess.h
+++ b/include/asm-sparc64/uaccess.h
@@ -10,7 +10,6 @@
#include <linux/compiler.h>
#include <linux/sched.h>
#include <linux/string.h>
-#include <asm/a.out.h>
#include <asm/asi.h>
#include <asm/system.h>
#include <asm/spitfire.h>
diff --git a/include/asm-sparc64/user.h b/include/asm-sparc64/user.h
index fce4e85..02b1389 100644
--- a/include/asm-sparc64/user.h
+++ b/include/asm-sparc64/user.h
@@ -8,7 +8,7 @@
#ifndef _SPARC64_USER_H
#define _SPARC64_USER_H
-#include <asm/a.out.h>
+#include <linux/a.out.h>
struct sunos_regs {
unsigned int psr, pc, npc, y;
unsigned int regs[15];
diff --git a/include/asm-um/a.out-core.h b/include/asm-um/a.out-core.h
new file mode 100644
index 0000000..995643b
--- /dev/null
+++ b/include/asm-um/a.out-core.h
@@ -0,0 +1,27 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef __UM_A_OUT_CORE_H
+#define __UM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *u)
+{
+}
+
+#endif /* __KERNEL__ */
+#endif /* __UM_A_OUT_CORE_H */
diff --git a/include/asm-um/a.out.h b/include/asm-um/a.out.h
index f42ff145..754181e 100644
--- a/include/asm-um/a.out.h
+++ b/include/asm-um/a.out.h
@@ -8,15 +8,4 @@
#include "asm/arch/a.out.h"
-#undef STACK_TOP
-#undef STACK_TOP_MAX
-
-extern unsigned long stacksizelim;
-
-#define STACK_ROOM (stacksizelim)
-
-#define STACK_TOP (TASK_SIZE - 2 * PAGE_SIZE)
-
-#define STACK_TOP_MAX STACK_TOP
-
#endif
diff --git a/include/asm-um/fixmap.h b/include/asm-um/fixmap.h
index 89a87c1..9d2be52 100644
--- a/include/asm-um/fixmap.h
+++ b/include/asm-um/fixmap.h
@@ -1,6 +1,7 @@
#ifndef __UM_FIXMAP_H
#define __UM_FIXMAP_H
+#include <asm/processor.h>
#include <asm/system.h>
#include <asm/kmap_types.h>
#include <asm/archparam.h>
@@ -57,7 +58,7 @@
* at the top of mem..
*/
-#define FIXADDR_TOP (CONFIG_TOP_ADDR - 2 * PAGE_SIZE)
+#define FIXADDR_TOP (TASK_SIZE - 2 * PAGE_SIZE)
#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
index fe2374d..381f96b 100644
--- a/include/asm-um/page.h
+++ b/include/asm-um/page.h
@@ -79,6 +79,8 @@
typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
#define pgd_val(x) ((x).pgd)
#define pgprot_val(x) ((x).pgprot)
diff --git a/include/asm-um/pgalloc.h b/include/asm-um/pgalloc.h
index 4f3e62b..9062a6e 100644
--- a/include/asm-um/pgalloc.h
+++ b/include/asm-um/pgalloc.h
@@ -18,6 +18,7 @@
set_pmd(pmd, __pmd(_PAGE_TABLE + \
((unsigned long long)page_to_pfn(pte) << \
(unsigned long long) PAGE_SHIFT)))
+#define pmd_pgtable(pmd) pmd_page(pmd)
/*
* Allocate and free page tables.
@@ -26,19 +27,24 @@
extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
-extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
{
free_page((unsigned long) pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
__free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb),(pte)); \
+} while (0)
#ifdef CONFIG_3_LEVEL_PGTABLES
diff --git a/include/asm-um/processor-generic.h b/include/asm-um/processor-generic.h
index b7d9a16..bed6688 100644
--- a/include/asm-um/processor-generic.h
+++ b/include/asm-um/processor-generic.h
@@ -11,7 +11,6 @@
struct task_struct;
#include "asm/ptrace.h"
-#include "asm/pgtable.h"
#include "registers.h"
#include "sysdep/archsetjmp.h"
@@ -92,7 +91,18 @@
/*
* User space process size: 3GB (default).
*/
-#define TASK_SIZE (CONFIG_TOP_ADDR & PGDIR_MASK)
+extern unsigned long task_size;
+
+#define TASK_SIZE (task_size)
+
+#undef STACK_TOP
+#undef STACK_TOP_MAX
+
+extern unsigned long stacksizelim;
+
+#define STACK_ROOM (stacksizelim)
+#define STACK_TOP (TASK_SIZE - 2 * PAGE_SIZE)
+#define STACK_TOP_MAX STACK_TOP
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
diff --git a/include/asm-um/processor-x86_64.h b/include/asm-um/processor-x86_64.h
index d946bf2..e509331 100644
--- a/include/asm-um/processor-x86_64.h
+++ b/include/asm-um/processor-x86_64.h
@@ -26,7 +26,7 @@
#define cpu_relax() rep_nop()
#define INIT_ARCH_THREAD { .debugregs = { [ 0 ... 7 ] = 0 }, \
- .debugregs_seq = 0, \
+ .debugregs_seq = 0, \
.fs = 0, \
.faultinfo = { 0, 0, 0 } }
@@ -37,6 +37,7 @@
static inline void arch_copy_thread(struct arch_thread *from,
struct arch_thread *to)
{
+ to->fs = from->fs;
}
#include "asm/arch/user.h"
diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h
index 3be77d5..cd5eaee 100644
--- a/include/asm-v850/anna.h
+++ b/include/asm-v850/anna.h
@@ -134,10 +134,4 @@
#define V850E_TIMER_D_TMCD_CS_MIN 1 /* min 2^1 divider */
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ 100
-#endif
-
-
#endif /* __V850_ANNA_H__ */
diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h
index 659bc910..5a5ca90 100644
--- a/include/asm-v850/as85ep1.h
+++ b/include/asm-v850/as85ep1.h
@@ -149,10 +149,4 @@
#define V850E_TIMER_D_TMCD_CS_MIN 2 /* min 2^2 divider */
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ 100
-#endif
-
-
#endif /* __V850_AS85EP1_H__ */
diff --git a/include/asm-v850/fpga85e2c.h b/include/asm-v850/fpga85e2c.h
index d32f045..23aae66 100644
--- a/include/asm-v850/fpga85e2c.h
+++ b/include/asm-v850/fpga85e2c.h
@@ -79,10 +79,4 @@
#endif
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ 122 /* actually, 8.192ms ticks =~ 122.07 */
-#endif
-
-
#endif /* __V850_FPGA85E2C_H__ */
diff --git a/include/asm-v850/param.h b/include/asm-v850/param.h
index 3c65bd5..2818326 100644
--- a/include/asm-v850/param.h
+++ b/include/asm-v850/param.h
@@ -23,8 +23,7 @@
#define MAXHOSTNAMELEN 64 /* max length of hostname */
#ifdef __KERNEL__
-#include <asm/machdep.h> /* For HZ */
-
+# define HZ CONFIG_HZ
# define USER_HZ 100
# define CLOCKS_PER_SEC USER_HZ
#endif
diff --git a/include/asm-v850/posix_types.h b/include/asm-v850/posix_types.h
index ccb7297..7f403b7 100644
--- a/include/asm-v850/posix_types.h
+++ b/include/asm-v850/posix_types.h
@@ -44,15 +44,11 @@
typedef unsigned int __kernel_old_dev_t;
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
/* We used to include <asm/bitops.h> here, which seems the right thing, but
it caused nasty include-file definition order problems. Removing the
@@ -71,6 +67,6 @@
#define __FD_ZERO(fd_set) \
memset (fd_set, 0, sizeof (*(fd_set *)fd_set))
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif /* __V850_POSIX_TYPES_H__ */
diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h
index e85d261..db9879f 100644
--- a/include/asm-v850/rte_cb.h
+++ b/include/asm-v850/rte_cb.h
@@ -69,12 +69,6 @@
#endif /* CONFIG_RTE_MB_A_PCI */
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ 100
-#endif
-
-
#ifndef __ASSEMBLY__
extern void rte_cb_early_init (void);
extern void rte_cb_init_irqs (void);
diff --git a/include/asm-v850/sim.h b/include/asm-v850/sim.h
index 10236ab..026932d 100644
--- a/include/asm-v850/sim.h
+++ b/include/asm-v850/sim.h
@@ -40,11 +40,6 @@
#define R0_RAM_ADDR 0xFFFFF000
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ 24 /* Minimum supported frequency. */
-#endif
-
/* For <asm/irq.h> */
#define NUM_CPU_IRQS 6
diff --git a/include/asm-v850/sim85e2.h b/include/asm-v850/sim85e2.h
index 17dd4fa..8b4d697 100644
--- a/include/asm-v850/sim85e2.h
+++ b/include/asm-v850/sim85e2.h
@@ -66,10 +66,4 @@
#define R0_RAM_ADDR 0xFFFFE000
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ 24 /* Minimum supported frequency. */
-#endif
-
-
#endif /* __V850_SIM85E2_H__ */
diff --git a/include/asm-x86/a.out-core.h b/include/asm-x86/a.out-core.h
new file mode 100644
index 0000000..d2b6e11
--- /dev/null
+++ b/include/asm-x86/a.out-core.h
@@ -0,0 +1,71 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+#ifdef CONFIG_X86_32
+
+#include <linux/user.h>
+#include <linux/elfcore.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+ u16 gs;
+
+/* changed the size calculations - should hopefully work better. lbt */
+ dump->magic = CMAGIC;
+ dump->start_code = 0;
+ dump->start_stack = regs->sp & ~(PAGE_SIZE - 1);
+ dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
+ dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;
+ dump->u_dsize -= dump->u_tsize;
+ dump->u_ssize = 0;
+ dump->u_debugreg[0] = current->thread.debugreg0;
+ dump->u_debugreg[1] = current->thread.debugreg1;
+ dump->u_debugreg[2] = current->thread.debugreg2;
+ dump->u_debugreg[3] = current->thread.debugreg3;
+ dump->u_debugreg[4] = 0;
+ dump->u_debugreg[5] = 0;
+ dump->u_debugreg[6] = current->thread.debugreg6;
+ dump->u_debugreg[7] = current->thread.debugreg7;
+
+ if (dump->start_stack < TASK_SIZE)
+ dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
+
+ dump->regs.bx = regs->bx;
+ dump->regs.cx = regs->cx;
+ dump->regs.dx = regs->dx;
+ dump->regs.si = regs->si;
+ dump->regs.di = regs->di;
+ dump->regs.bp = regs->bp;
+ dump->regs.ax = regs->ax;
+ dump->regs.ds = (u16)regs->ds;
+ dump->regs.es = (u16)regs->es;
+ dump->regs.fs = (u16)regs->fs;
+ savesegment(gs,gs);
+ dump->regs.orig_ax = regs->orig_ax;
+ dump->regs.ip = regs->ip;
+ dump->regs.cs = (u16)regs->cs;
+ dump->regs.flags = regs->flags;
+ dump->regs.sp = regs->sp;
+ dump->regs.ss = (u16)regs->ss;
+
+ dump->u_fpvalid = dump_fpu (regs, &dump->i387);
+}
+
+#endif /* CONFIG_X86_32 */
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
diff --git a/include/asm-x86/a.out.h b/include/asm-x86/a.out.h
index a62443e..4684f97 100644
--- a/include/asm-x86/a.out.h
+++ b/include/asm-x86/a.out.h
@@ -17,14 +17,4 @@
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#ifdef __KERNEL__
-# include <linux/thread_info.h>
-# define STACK_TOP TASK_SIZE
-# ifdef CONFIG_X86_32
-# define STACK_TOP_MAX STACK_TOP
-# else
-# define STACK_TOP_MAX TASK_SIZE64
-# endif
-#endif
-
#endif /* _ASM_X86_A_OUT_H */
diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h
index a6fd10f..ba715d9 100644
--- a/include/asm-x86/page_32.h
+++ b/include/asm-x86/page_32.h
@@ -50,6 +50,8 @@
typedef union { pteval_t pte, pte_low; } pte_t;
typedef pte_t boot_pte_t;
+typedef struct page *pgtable_t;
+
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_X86_PAE */
diff --git a/include/asm-x86/page_64.h b/include/asm-x86/page_64.h
index dcf0c07..f7393bc 100644
--- a/include/asm-x86/page_64.h
+++ b/include/asm-x86/page_64.h
@@ -71,6 +71,8 @@
typedef unsigned long pgprotval_t;
typedef unsigned long phys_addr_t;
+typedef struct page *pgtable_t;
+
typedef struct { pteval_t pte; } pte_t;
#define vmemmap ((struct page *)VMEMMAP_START)
diff --git a/include/asm-x86/pgalloc_32.h b/include/asm-x86/pgalloc_32.h
index bab1271..6bea6e5 100644
--- a/include/asm-x86/pgalloc_32.h
+++ b/include/asm-x86/pgalloc_32.h
@@ -31,6 +31,7 @@
paravirt_alloc_pt(mm, pfn);
set_pmd(pmd, __pmd(((pteval_t)pfn << PAGE_SHIFT) | _PAGE_TABLE));
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
/*
* Allocate and free page tables.
@@ -39,15 +40,16 @@
extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
-extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
{
free_page((unsigned long)pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
__free_page(pte);
}
diff --git a/include/asm-x86/pgalloc_64.h b/include/asm-x86/pgalloc_64.h
index 4f6220d..8d67223 100644
--- a/include/asm-x86/pgalloc_64.h
+++ b/include/asm-x86/pgalloc_64.h
@@ -12,6 +12,8 @@
#define pgd_populate(mm, pgd, pud) \
set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(pud)))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
{
set_pmd(pmd, __pmd(_PAGE_TABLE | (page_to_pfn(pte) << PAGE_SHIFT)));
@@ -91,12 +93,17 @@
return (pte_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
}
-static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
{
- void *p = (void *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
+ struct page *page;
+ void *p;
+
+ p = (void *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT);
if (!p)
return NULL;
- return virt_to_page(p);
+ page = virt_to_page(p);
+ pgtable_page_ctor(page);
+ return page;
}
/* Should really implement gc for free page table pages. This could be
@@ -108,12 +115,17 @@
free_page((unsigned long)pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
+ pgtable_page_dtor(pte);
__free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte))
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor((pte)); \
+ tlb_remove_page((tlb), (pte)); \
+} while (0)
#define __pmd_free_tlb(tlb,x) tlb_remove_page((tlb),virt_to_page(x))
#define __pud_free_tlb(tlb,x) tlb_remove_page((tlb),virt_to_page(x))
diff --git a/include/asm-x86/posix_types_32.h b/include/asm-x86/posix_types_32.h
index 133e31e..015e539 100644
--- a/include/asm-x86/posix_types_32.h
+++ b/include/asm-x86/posix_types_32.h
@@ -39,14 +39,10 @@
#endif
typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
#undef __FD_SET
#define __FD_SET(fd,fdsetp) \
@@ -77,6 +73,6 @@
"2" ((__kernel_fd_set *) (fdsetp)) : "memory"); \
} while (0)
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
index ab4d0c2..149920d 100644
--- a/include/asm-x86/processor.h
+++ b/include/asm-x86/processor.h
@@ -719,6 +719,8 @@
* User space process size: 3GB (default).
*/
#define TASK_SIZE (PAGE_OFFSET)
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
#define INIT_THREAD { \
.sp0 = sizeof(init_stack) + (long)&init_stack, \
@@ -802,6 +804,9 @@
#define TASK_SIZE_OF(child) ((test_tsk_thread_flag(child, TIF_IA32)) ? \
IA32_PAGE_OFFSET : TASK_SIZE64)
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX TASK_SIZE64
+
#define INIT_THREAD { \
.sp0 = (unsigned long)&init_stack + sizeof(init_stack) \
}
diff --git a/include/asm-xtensa/a.out.h b/include/asm-xtensa/a.out.h
index 05a2f67..fdf1370 100644
--- a/include/asm-xtensa/a.out.h
+++ b/include/asm-xtensa/a.out.h
@@ -14,11 +14,6 @@
#ifndef _XTENSA_A_OUT_H
#define _XTENSA_A_OUT_H
-/* Note: the kernel needs the a.out definitions, even if only ELF is used. */
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-
struct exec
{
unsigned long a_info;
diff --git a/include/asm-xtensa/page.h b/include/asm-xtensa/page.h
index 1adedbf..80a6ae0 100644
--- a/include/asm-xtensa/page.h
+++ b/include/asm-xtensa/page.h
@@ -98,6 +98,7 @@
typedef struct { unsigned long pte; } pte_t; /* page table entry */
typedef struct { unsigned long pgd; } pgd_t; /* PGD table entry */
typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
#define pte_val(x) ((x).pte)
#define pgd_val(x) ((x).pgd)
diff --git a/include/asm-xtensa/param.h b/include/asm-xtensa/param.h
index ce3a336..82ad34d 100644
--- a/include/asm-xtensa/param.h
+++ b/include/asm-xtensa/param.h
@@ -12,7 +12,7 @@
#define _XTENSA_PARAM_H
#ifdef __KERNEL__
-# define HZ 100 /* internal timer frequency */
+# define HZ CONFIG_HZ /* internal timer frequency */
# define USER_HZ 100 /* for user interfaces in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* frequnzy at which times() counts */
#endif
diff --git a/include/asm-xtensa/pgalloc.h b/include/asm-xtensa/pgalloc.h
index 1d51ba5..8d1544e 100644
--- a/include/asm-xtensa/pgalloc.h
+++ b/include/asm-xtensa/pgalloc.h
@@ -24,6 +24,7 @@
(pmd_val(*(pmdp)) = ((unsigned long)ptep))
#define pmd_populate(mm, pmdp, page) \
(pmd_val(*(pmdp)) = ((unsigned long)page_to_virt(page)))
+#define pmd_pgtable(pmd) pmd_page(pmd)
static inline pgd_t*
pgd_alloc(struct mm_struct *mm)
@@ -46,10 +47,14 @@
return kmem_cache_alloc(pgtable_cache, GFP_KERNEL|__GFP_REPEAT);
}
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
- unsigned long addr)
+static inline pte_token_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long addr)
{
- return virt_to_page(pte_alloc_one_kernel(mm, addr));
+ struct page *page;
+
+ page = virt_to_page(pte_alloc_one_kernel(mm, addr));
+ pgtable_page_ctor(page);
+ return page;
}
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
@@ -57,10 +62,12 @@
kmem_cache_free(pgtable_cache, pte);
}
-static inline void pte_free(struct mm_struct *mm, struct page *page)
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
{
- kmem_cache_free(pgtable_cache, page_address(page));
+ pgtable_page_dtor(pte);
+ kmem_cache_free(pgtable_cache, page_address(pte));
}
+#define pmd_pgtable(pmd) pmd_page(pmd)
#endif /* __KERNEL__ */
#endif /* _XTENSA_PGALLOC_H */
diff --git a/include/asm-xtensa/posix_types.h b/include/asm-xtensa/posix_types.h
index 4ad77dd..43f9dd1 100644
--- a/include/asm-xtensa/posix_types.h
+++ b/include/asm-xtensa/posix_types.h
@@ -64,8 +64,7 @@
#else /* __GNUC__ */
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
- || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
+#if defined(__KERNEL__)
/* With GNU C, use inline functions instead so args are evaluated only once: */
#undef __FD_SET
@@ -118,6 +117,6 @@
}
}
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
#endif /* __GNUC__ */
#endif /* _XTENSA_POSIX_TYPES_H */
diff --git a/include/asm-xtensa/processor.h b/include/asm-xtensa/processor.h
index 35145bc..96408f4 100644
--- a/include/asm-xtensa/processor.h
+++ b/include/asm-xtensa/processor.h
@@ -34,6 +34,8 @@
*/
#define TASK_SIZE __XTENSA_UL_CONST(0x40000000)
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
/*
* General exception cause assigned to debug exceptions. Debug exceptions go
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 2ebf068..5cae9b5 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -338,7 +338,6 @@
unifdef-y += types.h
unifdef-y += udf_fs_i.h
unifdef-y += udp.h
-unifdef-y += ufs_fs.h
unifdef-y += uinput.h
unifdef-y += uio.h
unifdef-y += unistd.h
diff --git a/include/linux/a.out.h b/include/linux/a.out.h
index 82cd918..208f4e8 100644
--- a/include/linux/a.out.h
+++ b/include/linux/a.out.h
@@ -1,6 +1,8 @@
#ifndef __A_OUT_GNU_H__
#define __A_OUT_GNU_H__
+#ifdef CONFIG_ARCH_SUPPORTS_AOUT
+
#define __GNU_EXEC_MACROS__
#ifndef __STRUCT_EXEC_OVERRIDE__
@@ -9,6 +11,8 @@
#endif /* __STRUCT_EXEC_OVERRIDE__ */
+#ifndef __ASSEMBLY__
+
/* these go in the N_MACHTYPE field */
enum machine_type {
#if defined (M_OLDSUN2)
@@ -272,5 +276,11 @@
};
#endif /* no N_RELOCATION_INFO_DECLARED. */
-
+#endif /*__ASSEMBLY__ */
+#else /* CONFIG_ARCH_SUPPORTS_AOUT */
+#ifndef __ASSEMBLY__
+struct exec {
+};
+#endif
+#endif /* CONFIG_ARCH_SUPPORTS_AOUT */
#endif /* __A_OUT_GNU_H__ */
diff --git a/include/linux/atmel_pwm.h b/include/linux/atmel_pwm.h
new file mode 100644
index 0000000..ea04abb
--- /dev/null
+++ b/include/linux/atmel_pwm.h
@@ -0,0 +1,70 @@
+#ifndef __LINUX_ATMEL_PWM_H
+#define __LINUX_ATMEL_PWM_H
+
+/**
+ * struct pwm_channel - driver handle to a PWM channel
+ * @regs: base of this channel's registers
+ * @index: number of this channel (0..31)
+ * @mck: base clock rate, which can be prescaled and maybe subdivided
+ *
+ * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
+ * Then they configure its clock rate (derived from MCK), alignment,
+ * polarity, and duty cycle by writing directly to the channel registers,
+ * before enabling the channel by calling pwm_channel_enable().
+ *
+ * After emitting a PWM signal for the desired length of time, drivers
+ * may then pwm_channel_disable() or pwm_channel_free(). Both of these
+ * disable the channel, but when it's freed the IRQ is deconfigured and
+ * the channel must later be re-allocated and reconfigured.
+ *
+ * Note that if the period or duty cycle need to be changed while the
+ * PWM channel is operating, drivers must use the PWM_CUPD double buffer
+ * mechanism, either polling until they change or getting implicitly
+ * notified through a once-per-period interrupt handler.
+ */
+struct pwm_channel {
+ void __iomem *regs;
+ unsigned index;
+ unsigned long mck;
+};
+
+extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
+extern int pwm_channel_free(struct pwm_channel *ch);
+
+extern int pwm_clk_alloc(unsigned prescale, unsigned div);
+extern void pwm_clk_free(unsigned clk);
+
+extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
+
+#define pwm_channel_enable(ch) __pwm_channel_onoff((ch), 1)
+#define pwm_channel_disable(ch) __pwm_channel_onoff((ch), 0)
+
+/* periodic interrupts, mostly for CUPD changes to period or cycle */
+extern int pwm_channel_handler(struct pwm_channel *ch,
+ void (*handler)(struct pwm_channel *ch));
+
+/* per-channel registers (banked at pwm_channel->regs) */
+#define PWM_CMR 0x00 /* mode register */
+#define PWM_CPR_CPD (1 << 10) /* set: CUPD modifies period */
+#define PWM_CPR_CPOL (1 << 9) /* set: idle high */
+#define PWM_CPR_CALG (1 << 8) /* set: center align */
+#define PWM_CPR_CPRE (0xf << 0) /* mask: rate is mck/(2^pre) */
+#define PWM_CPR_CLKA (0xb << 0) /* rate CLKA */
+#define PWM_CPR_CLKB (0xc << 0) /* rate CLKB */
+#define PWM_CDTY 0x04 /* duty cycle (max of CPRD) */
+#define PWM_CPRD 0x08 /* period (count up from zero) */
+#define PWM_CCNT 0x0c /* counter (20 bits?) */
+#define PWM_CUPD 0x10 /* update CPRD (or CDTY) next period */
+
+static inline void
+pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
+{
+ __raw_writel(val, pwmc->regs + offset);
+}
+
+static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
+{
+ return __raw_readl(pwmc->regs + offset);
+}
+
+#endif /* __LINUX_ATMEL_PWM_H */
diff --git a/include/linux/byteorder/generic.h b/include/linux/byteorder/generic.h
index 3dc715b..d377155 100644
--- a/include/linux/byteorder/generic.h
+++ b/include/linux/byteorder/generic.h
@@ -146,6 +146,36 @@
#define htons(x) ___htons(x)
#define ntohs(x) ___ntohs(x)
+static inline void le16_add_cpu(__le16 *var, u16 val)
+{
+ *var = cpu_to_le16(le16_to_cpu(*var) + val);
+}
+
+static inline void le32_add_cpu(__le32 *var, u32 val)
+{
+ *var = cpu_to_le32(le32_to_cpu(*var) + val);
+}
+
+static inline void le64_add_cpu(__le64 *var, u64 val)
+{
+ *var = cpu_to_le64(le64_to_cpu(*var) + val);
+}
+
+static inline void be16_add_cpu(__be16 *var, u16 val)
+{
+ *var = cpu_to_be16(be16_to_cpu(*var) + val);
+}
+
+static inline void be32_add_cpu(__be32 *var, u32 val)
+{
+ *var = cpu_to_be32(be32_to_cpu(*var) + val);
+}
+
+static inline void be64_add_cpu(__be64 *var, u64 val)
+{
+ *var = cpu_to_be64(be64_to_cpu(*var) + val);
+}
+
#endif /* KERNEL */
#endif /* _LINUX_BYTEORDER_GENERIC_H */
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index ecae585..f8c9a27 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -57,7 +57,9 @@
extern void __cpuset_memory_pressure_bump(void);
extern const struct file_operations proc_cpuset_operations;
-extern char *cpuset_task_status_allowed(struct task_struct *task, char *buffer);
+struct seq_file;
+extern void cpuset_task_status_allowed(struct seq_file *m,
+ struct task_struct *task);
extern void cpuset_lock(void);
extern void cpuset_unlock(void);
@@ -126,10 +128,9 @@
static inline void cpuset_memory_pressure_bump(void) {}
-static inline char *cpuset_task_status_allowed(struct task_struct *task,
- char *buffer)
+static inline void cpuset_task_status_allowed(struct seq_file *m,
+ struct task_struct *task)
{
- return buffer;
}
static inline void cpuset_lock(void) {}
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index ffb6439..56c73b8 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -28,7 +28,7 @@
#ifdef CONFIG_DMAR
struct intel_iommu;
-extern char *dmar_get_fault_reason(u8 fault_reason);
+extern const char *dmar_get_fault_reason(u8 fault_reason);
/* Can't use the common MSI interrupt functions
* since DMAR is not a pci device
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index bbc9992..325acdf 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -35,8 +35,11 @@
DMI_DEV_TYPE_ETHERNET,
DMI_DEV_TYPE_TOKENRING,
DMI_DEV_TYPE_SOUND,
+ DMI_DEV_TYPE_PATA,
+ DMI_DEV_TYPE_SATA,
+ DMI_DEV_TYPE_SAS,
DMI_DEV_TYPE_IPMI = -1,
- DMI_DEV_TYPE_OEM_STRING = -2
+ DMI_DEV_TYPE_OEM_STRING = -2,
};
struct dmi_header {
diff --git a/include/linux/elf-em.h b/include/linux/elf-em.h
index 5834e84..18bea78 100644
--- a/include/linux/elf-em.h
+++ b/include/linux/elf-em.h
@@ -31,6 +31,7 @@
#define EM_V850 87 /* NEC v850 */
#define EM_M32R 88 /* Renesas M32R */
#define EM_H8_300 46 /* Renesas H8/300,300H,H8S */
+#define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */
#define EM_BLACKFIN 106 /* ADI Blackfin Processor */
#define EM_FRV 0x5441 /* Fujitsu FR-V */
#define EM_AVR32 0x18ad /* Atmel AVR32 */
@@ -47,6 +48,8 @@
#define EM_CYGNUS_M32R 0x9041
/* This is the old interim value for S/390 architecture */
#define EM_S390_OLD 0xA390
+/* Also Panasonic/MEI MN10300, AM33 */
+#define EM_CYGNUS_MN10300 0xbeef
#endif /* _LINUX_ELF_EM_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 36b7abe..18cfbf7 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1038,6 +1038,12 @@
* in /proc/mounts will be "type.subtype"
*/
char *s_subtype;
+
+ /*
+ * Saved mount options for lazy filesystems using
+ * generic_show_options()
+ */
+ char *s_options;
};
extern struct timespec current_fs_time(struct super_block *sb);
@@ -1618,7 +1624,6 @@
const struct file_operations *);
extern void unregister_chrdev(unsigned int, const char *);
extern void unregister_chrdev_region(dev_t, unsigned);
-extern int chrdev_open(struct inode *, struct file *);
extern void chrdev_show(struct seq_file *,off_t);
/* fs/block_dev.c */
@@ -1807,9 +1812,6 @@
unsigned long, loff_t, loff_t *, size_t, ssize_t);
extern ssize_t do_sync_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos);
extern ssize_t do_sync_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos);
-extern void do_generic_mapping_read(struct address_space *mapping,
- struct file_ra_state *, struct file *,
- loff_t *, read_descriptor_t *, read_actor_t);
extern int generic_segment_checks(const struct iovec *iov,
unsigned long *nr_segs, size_t *count, int access_flags);
@@ -1847,18 +1849,6 @@
}
#endif
-static inline void do_generic_file_read(struct file * filp, loff_t *ppos,
- read_descriptor_t * desc,
- read_actor_t actor)
-{
- do_generic_mapping_read(filp->f_mapping,
- &filp->f_ra,
- filp,
- ppos,
- desc,
- actor);
-}
-
#ifdef CONFIG_BLOCK
ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
struct block_device *bdev, const struct iovec *iov, loff_t offset,
@@ -1985,6 +1975,9 @@
extern void file_update_time(struct file *file);
+extern int generic_show_options(struct seq_file *m, struct vfsmount *mnt);
+extern void save_mount_options(struct super_block *sb, char *options);
+
static inline ino_t parent_ino(struct dentry *dentry)
{
ino_t res;
@@ -2056,7 +2049,7 @@
static struct file_operations __fops = { \
.owner = THIS_MODULE, \
.open = __fops ## _open, \
- .release = simple_attr_close, \
+ .release = simple_attr_release, \
.read = simple_attr_read, \
.write = simple_attr_write, \
};
@@ -2068,9 +2061,9 @@
}
int simple_attr_open(struct inode *inode, struct file *file,
- u64 (*get)(void *), void (*set)(void *, u64),
+ int (*get)(void *, u64 *), int (*set)(void *, u64),
const char *fmt);
-int simple_attr_close(struct inode *inode, struct file *file);
+int simple_attr_release(struct inode *inode, struct file *file);
ssize_t simple_attr_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos);
ssize_t simple_attr_write(struct file *file, const char __user *buf,
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 203591e..600fc3b 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -78,7 +78,7 @@
* as otherwise the timer could be removed before the softirq code finishes the
* the handling of the timer.
*
- * The HRTIMER_STATE_ENQUEUE bit is always or'ed to the current state to
+ * The HRTIMER_STATE_ENQUEUED bit is always or'ed to the current state to
* preserve the HRTIMER_STATE_CALLBACK bit in the above scenario.
*
* All state transitions are protected by cpu_base->lock.
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 30d606a..7ca198b 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -17,6 +17,7 @@
}
int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
+int hugetlb_overcommit_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, unsigned long *, int *, int, int);
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
index 408696e..b882610 100644
--- a/include/linux/ipc.h
+++ b/include/linux/ipc.h
@@ -100,58 +100,6 @@
void *security;
};
-struct ipc_ids;
-struct ipc_namespace {
- struct kref kref;
- struct ipc_ids *ids[3];
-
- int sem_ctls[4];
- int used_sems;
-
- int msg_ctlmax;
- int msg_ctlmnb;
- int msg_ctlmni;
- atomic_t msg_bytes;
- atomic_t msg_hdrs;
-
- size_t shm_ctlmax;
- size_t shm_ctlall;
- int shm_ctlmni;
- int shm_tot;
-};
-
-extern struct ipc_namespace init_ipc_ns;
-
-#ifdef CONFIG_SYSVIPC
-#define INIT_IPC_NS(ns) .ns = &init_ipc_ns,
-extern void free_ipc_ns(struct kref *kref);
-extern struct ipc_namespace *copy_ipcs(unsigned long flags,
- struct ipc_namespace *ns);
-#else
-#define INIT_IPC_NS(ns)
-static inline struct ipc_namespace *copy_ipcs(unsigned long flags,
- struct ipc_namespace *ns)
-{
- return ns;
-}
-#endif
-
-static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns)
-{
-#ifdef CONFIG_SYSVIPC
- if (ns)
- kref_get(&ns->kref);
-#endif
- return ns;
-}
-
-static inline void put_ipc_ns(struct ipc_namespace *ns)
-{
-#ifdef CONFIG_SYSVIPC
- kref_put(&ns->kref, free_ipc_ns);
-#endif
-}
-
#endif /* __KERNEL__ */
#endif /* _LINUX_IPC_H */
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
new file mode 100644
index 0000000..e4451d1
--- /dev/null
+++ b/include/linux/ipc_namespace.h
@@ -0,0 +1,81 @@
+#ifndef __IPC_NAMESPACE_H__
+#define __IPC_NAMESPACE_H__
+
+#include <linux/err.h>
+#include <linux/idr.h>
+#include <linux/rwsem.h>
+
+struct ipc_ids {
+ int in_use;
+ unsigned short seq;
+ unsigned short seq_max;
+ struct rw_semaphore rw_mutex;
+ struct idr ipcs_idr;
+};
+
+struct ipc_namespace {
+ struct kref kref;
+ struct ipc_ids ids[3];
+
+ int sem_ctls[4];
+ int used_sems;
+
+ int msg_ctlmax;
+ int msg_ctlmnb;
+ int msg_ctlmni;
+ atomic_t msg_bytes;
+ atomic_t msg_hdrs;
+
+ size_t shm_ctlmax;
+ size_t shm_ctlall;
+ int shm_ctlmni;
+ int shm_tot;
+};
+
+extern struct ipc_namespace init_ipc_ns;
+
+#ifdef CONFIG_SYSVIPC
+#define INIT_IPC_NS(ns) .ns = &init_ipc_ns,
+#else
+#define INIT_IPC_NS(ns)
+#endif
+
+#if defined(CONFIG_SYSVIPC) && defined(CONFIG_IPC_NS)
+extern void free_ipc_ns(struct kref *kref);
+extern struct ipc_namespace *copy_ipcs(unsigned long flags,
+ struct ipc_namespace *ns);
+extern void free_ipcs(struct ipc_namespace *ns, struct ipc_ids *ids,
+ void (*free)(struct ipc_namespace *,
+ struct kern_ipc_perm *));
+
+static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns)
+{
+ if (ns)
+ kref_get(&ns->kref);
+ return ns;
+}
+
+static inline void put_ipc_ns(struct ipc_namespace *ns)
+{
+ kref_put(&ns->kref, free_ipc_ns);
+}
+#else
+static inline struct ipc_namespace *copy_ipcs(unsigned long flags,
+ struct ipc_namespace *ns)
+{
+ if (flags & CLONE_NEWIPC)
+ return ERR_PTR(-EINVAL);
+
+ return ns;
+}
+
+static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns)
+{
+ return ns;
+}
+
+static inline void put_ipc_ns(struct ipc_namespace *ns)
+{
+}
+#endif
+#endif
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 4669be0..bfd9efb 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -25,7 +25,7 @@
#include <asm/irq_regs.h>
struct irq_desc;
-typedef void fastcall (*irq_flow_handler_t)(unsigned int irq,
+typedef void (*irq_flow_handler_t)(unsigned int irq,
struct irq_desc *desc);
@@ -276,19 +276,19 @@
* Built-in IRQ handlers for various IRQ types,
* callable via desc->chip->handle_irq()
*/
-extern void fastcall handle_level_irq(unsigned int irq, struct irq_desc *desc);
-extern void fastcall handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc);
-extern void fastcall handle_edge_irq(unsigned int irq, struct irq_desc *desc);
-extern void fastcall handle_simple_irq(unsigned int irq, struct irq_desc *desc);
-extern void fastcall handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
-extern void fastcall handle_bad_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_level_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_edge_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
/*
* Monolithic do_IRQ implementation.
* (is an explicit fastcall, because i386 4KSTACKS calls it from assembly)
*/
#ifndef CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ
-extern fastcall unsigned int __do_IRQ(unsigned int irq);
+extern unsigned int __do_IRQ(unsigned int irq);
#endif
/*
@@ -367,6 +367,9 @@
__set_irq_handler(irq, handle, 1, NULL);
}
+extern void set_irq_noprobe(unsigned int irq);
+extern void set_irq_probe(unsigned int irq);
+
/* Handle dynamic irq creation and destruction */
extern int create_irq(void);
extern void destroy_irq(unsigned int irq);
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 7ba9e47..e0b5b68 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -42,7 +42,7 @@
/* LATCH is used in the interval timer and ftape setup. */
#define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */
-/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can
+/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, then we can
* improve accuracy by shifting LSH bits, hence calculating:
* (NOM << LSH) / DEN
* This however means trouble for large NOM, because (NOM << LSH) may no
@@ -160,7 +160,7 @@
* We want to do realistic conversions of time so we need to use the same
* values the update wall clock code uses as the jiffies size. This value
* is: TICK_NSEC (which is defined in timex.h). This
- * is a constant and is in nanoseconds. We will used scaled math
+ * is a constant and is in nanoseconds. We will use scaled math
* with a set of scales defined here as SEC_JIFFIE_SC, USEC_JIFFIE_SC and
* NSEC_JIFFIE_SC. Note that these defines contain nothing but
* constants and so are computed at compile time. SHIFT_HZ (computed in
@@ -204,7 +204,7 @@
* operator if the result is a long long AND at least one of the
* operands is cast to long long (usually just prior to the "*" so as
* not to confuse it into thinking it really has a 64-bit operand,
- * which, buy the way, it can do, but it take more code and at least 2
+ * which, buy the way, it can do, but it takes more code and at least 2
* mpys).
* We also need to be aware that one second in nanoseconds is only a
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 9e01f37..2df44e7 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -133,7 +133,7 @@
extern void oops_enter(void);
extern void oops_exit(void);
extern int oops_may_print(void);
-fastcall NORET_TYPE void do_exit(long error_code)
+NORET_TYPE void do_exit(long error_code)
ATTRIB_NORET;
NORET_TYPE void complete_and_exit(struct completion *, long)
ATTRIB_NORET;
@@ -141,6 +141,10 @@
extern long simple_strtol(const char *,char **,unsigned int);
extern unsigned long long simple_strtoull(const char *,char **,unsigned int);
extern long long simple_strtoll(const char *,char **,unsigned int);
+extern int strict_strtoul(const char *, unsigned int, unsigned long *);
+extern int strict_strtol(const char *, unsigned int, long *);
+extern int strict_strtoull(const char *, unsigned int, unsigned long long *);
+extern int strict_strtoll(const char *, unsigned int, long long *);
extern int sprintf(char * buf, const char * fmt, ...)
__attribute__ ((format (printf, 2, 3)));
extern int vsprintf(char *buf, const char *, va_list)
@@ -172,8 +176,6 @@
struct pid;
extern struct pid *session_of_pgrp(struct pid *pgrp);
-extern void dump_thread(struct pt_regs *regs, struct user *dump);
-
#ifdef CONFIG_PRINTK
asmlinkage int vprintk(const char *fmt, va_list args)
__attribute__ ((format (printf, 1, 0)));
@@ -182,6 +184,13 @@
extern int log_buf_get_len(void);
extern int log_buf_read(int idx);
extern int log_buf_copy(char *dest, int idx, int len);
+
+extern int printk_ratelimit_jiffies;
+extern int printk_ratelimit_burst;
+extern int printk_ratelimit(void);
+extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+ unsigned int interval_msec);
#else
static inline int vprintk(const char *s, va_list args)
__attribute__ ((format (printf, 1, 0)));
@@ -192,6 +201,12 @@
static inline int log_buf_get_len(void) { return 0; }
static inline int log_buf_read(int idx) { return 0; }
static inline int log_buf_copy(char *dest, int idx, int len) { return 0; }
+static inline int printk_ratelimit(void) { return 0; }
+static inline int __printk_ratelimit(int ratelimit_jiffies, \
+ int ratelimit_burst) { return 0; }
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
+ unsigned int interval_msec) \
+ { return false; }
#endif
extern void __attribute__((format(printf, 1, 2)))
@@ -199,11 +214,6 @@
unsigned long int_sqrt(unsigned long);
-extern int printk_ratelimit(void);
-extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
-extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
- unsigned int interval_msec);
-
static inline void console_silent(void)
{
console_loglevel = 0;
@@ -224,6 +234,7 @@
extern int tainted;
extern const char *print_tainted(void);
extern void add_taint(unsigned);
+extern int root_mountflags;
/* Values used for system_state */
extern enum system_states {
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 89d7c69..e8abb38 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -894,6 +894,18 @@
#define pte_lockptr(mm, pmd) ({(void)(pmd); &(mm)->page_table_lock;})
#endif /* NR_CPUS < CONFIG_SPLIT_PTLOCK_CPUS */
+static inline void pgtable_page_ctor(struct page *page)
+{
+ pte_lock_init(page);
+ inc_zone_page_state(page, NR_PAGETABLE);
+}
+
+static inline void pgtable_page_dtor(struct page *page)
+{
+ pte_lock_deinit(page);
+ dec_zone_page_state(page, NR_PAGETABLE);
+}
+
#define pte_offset_map_lock(mm, pmd, address, ptlp) \
({ \
spinlock_t *__ptl = pte_lockptr(mm, pmd); \
@@ -1136,7 +1148,7 @@
#define FOLL_GET 0x04 /* do get_page on page */
#define FOLL_ANON 0x08 /* give ZERO_PAGE if no pgtable */
-typedef int (*pte_fn_t)(pte_t *pte, struct page *pmd_page, unsigned long addr,
+typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr,
void *data);
extern int apply_to_page_range(struct mm_struct *mm, unsigned long address,
unsigned long size, pte_fn_t fn, void *data);
diff --git a/include/linux/module.h b/include/linux/module.h
index ac481e2..ac28e87 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -449,7 +449,7 @@
/* For kallsyms to ask for address resolution. namebuf should be at
* least KSYM_NAME_LEN long: a pointer to namebuf is returned if
* found, otherwise NULL. */
-char *module_address_lookup(unsigned long addr,
+const char *module_address_lookup(unsigned long addr,
unsigned long *symbolsize,
unsigned long *offset,
char **modname,
@@ -519,7 +519,7 @@
#define module_name(mod) "kernel"
/* For kallsyms to ask for address resolution. NULL means not found. */
-static inline char *module_address_lookup(unsigned long addr,
+static inline const char *module_address_lookup(unsigned long addr,
unsigned long *symbolsize,
unsigned long *offset,
char **modname,
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
index 05c5903..bc6da10 100644
--- a/include/linux/mutex.h
+++ b/include/linux/mutex.h
@@ -112,7 +112,7 @@
*
* Returns 1 if the mutex is locked, 0 if unlocked.
*/
-static inline int fastcall mutex_is_locked(struct mutex *lock)
+static inline int mutex_is_locked(struct mutex *lock)
{
return atomic_read(&lock->count) != 1;
}
@@ -132,9 +132,9 @@
#define mutex_lock_interruptible(lock) mutex_lock_interruptible_nested(lock, 0)
#define mutex_lock_killable(lock) mutex_lock_killable_nested(lock, 0)
#else
-extern void fastcall mutex_lock(struct mutex *lock);
-extern int __must_check fastcall mutex_lock_interruptible(struct mutex *lock);
-extern int __must_check fastcall mutex_lock_killable(struct mutex *lock);
+extern void mutex_lock(struct mutex *lock);
+extern int __must_check mutex_lock_interruptible(struct mutex *lock);
+extern int __must_check mutex_lock_killable(struct mutex *lock);
# define mutex_lock_nested(lock, subclass) mutex_lock(lock)
# define mutex_lock_interruptible_nested(lock, subclass) mutex_lock_interruptible(lock)
@@ -145,7 +145,7 @@
* NOTE: mutex_trylock() follows the spin_trylock() convention,
* not the down_trylock() convention!
*/
-extern int fastcall mutex_trylock(struct mutex *lock);
-extern void fastcall mutex_unlock(struct mutex *lock);
+extern int mutex_trylock(struct mutex *lock);
+extern void mutex_unlock(struct mutex *lock);
#endif
diff --git a/include/linux/nbd.h b/include/linux/nbd.h
index cc2b472..9865720 100644
--- a/include/linux/nbd.h
+++ b/include/linux/nbd.h
@@ -35,7 +35,6 @@
};
#define nbd_cmd(req) ((req)->cmd[0])
-#define MAX_NBD 128
/* userspace doesn't need the nbd_device structure */
#ifdef __KERNEL__
diff --git a/include/linux/pid.h b/include/linux/pid.h
index e29a900..f84d532 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -118,18 +118,17 @@
*/
extern struct pid *find_get_pid(int nr);
extern struct pid *find_ge_pid(int nr, struct pid_namespace *);
+int next_pidmap(struct pid_namespace *pid_ns, int last);
extern struct pid *alloc_pid(struct pid_namespace *ns);
extern void FASTCALL(free_pid(struct pid *pid));
-extern void zap_pid_ns_processes(struct pid_namespace *pid_ns);
/*
* the helpers to get the pid's id seen from different namespaces
*
* pid_nr() : global id, i.e. the id seen from the init namespace;
- * pid_vnr() : virtual id, i.e. the id seen from the namespace this pid
- * belongs to. this only makes sence when called in the
- * context of the task that belongs to the same namespace;
+ * pid_vnr() : virtual id, i.e. the id seen from the pid namespace of
+ * current.
* pid_nr_ns() : id seen from the ns specified.
*
* see also task_xid_nr() etc in include/linux/sched.h
@@ -144,14 +143,7 @@
}
pid_t pid_nr_ns(struct pid *pid, struct pid_namespace *ns);
-
-static inline pid_t pid_vnr(struct pid *pid)
-{
- pid_t nr = 0;
- if (pid)
- nr = pid->numbers[pid->level].nr;
- return nr;
-}
+pid_t pid_vnr(struct pid *pid);
#define do_each_pid_task(pid, type, task) \
do { \
@@ -160,7 +152,13 @@
hlist_for_each_entry_rcu((task), pos___, \
&pid->tasks[type], pids[type].node) {
+ /*
+ * Both old and new leaders may be attached to
+ * the same pid in the middle of de_thread().
+ */
#define while_each_pid_task(pid, type, task) \
+ if (type == PIDTYPE_PID) \
+ break; \
} \
} while (0)
diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
index 1689e28..fcd61fa 100644
--- a/include/linux/pid_namespace.h
+++ b/include/linux/pid_namespace.h
@@ -39,6 +39,7 @@
extern struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *ns);
extern void free_pid_ns(struct kref *kref);
+extern void zap_pid_ns_processes(struct pid_namespace *pid_ns);
static inline void put_pid_ns(struct pid_namespace *ns)
{
@@ -66,6 +67,11 @@
{
}
+
+static inline void zap_pid_ns_processes(struct pid_namespace *ns)
+{
+ BUG();
+}
#endif /* CONFIG_PID_NS */
static inline struct pid_namespace *task_active_pid_ns(struct task_struct *tsk)
diff --git a/include/linux/preempt.h b/include/linux/preempt.h
index 484988e..23f0c54 100644
--- a/include/linux/preempt.h
+++ b/include/linux/preempt.h
@@ -11,8 +11,8 @@
#include <linux/list.h>
#ifdef CONFIG_DEBUG_PREEMPT
- extern void fastcall add_preempt_count(int val);
- extern void fastcall sub_preempt_count(int val);
+ extern void add_preempt_count(int val);
+ extern void sub_preempt_count(int val);
#else
# define add_preempt_count(val) do { preempt_count() += (val); } while (0)
# define sub_preempt_count(val) do { preempt_count() -= (val); } while (0)
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index e435515..d6a4f69 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -118,13 +118,17 @@
int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir);
unsigned long task_vsize(struct mm_struct *);
int task_statm(struct mm_struct *, int *, int *, int *, int *);
-char *task_mem(struct mm_struct *, char *);
+void task_mem(struct seq_file *, struct mm_struct *);
+void clear_refs_smap(struct mm_struct *mm);
struct proc_dir_entry *de_get(struct proc_dir_entry *de);
void de_put(struct proc_dir_entry *de);
extern struct proc_dir_entry *create_proc_entry(const char *name, mode_t mode,
struct proc_dir_entry *parent);
+struct proc_dir_entry *proc_create(const char *name, mode_t mode,
+ struct proc_dir_entry *parent,
+ const struct file_operations *proc_fops);
extern void remove_proc_entry(const char *name, struct proc_dir_entry *parent);
extern struct vfsmount *proc_mnt;
@@ -219,7 +223,12 @@
static inline struct proc_dir_entry *create_proc_entry(const char *name,
mode_t mode, struct proc_dir_entry *parent) { return NULL; }
-
+static inline struct proc_dir_entry *proc_create(const char *name,
+ mode_t mode, struct proc_dir_entry *parent,
+ const struct file_operations *proc_fops)
+{
+ return NULL;
+}
#define remove_proc_entry(name, parent) do {} while (0)
static inline struct proc_dir_entry *proc_symlink(const char *name,
@@ -262,6 +271,9 @@
union proc_op {
int (*proc_get_link)(struct inode *, struct dentry **, struct vfsmount **);
int (*proc_read)(struct task_struct *task, char *page);
+ int (*proc_show)(struct seq_file *m,
+ struct pid_namespace *ns, struct pid *pid,
+ struct task_struct *task);
};
struct proc_inode {
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 6ab8071..ebe0c17 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -67,7 +67,6 @@
#define PT_TRACE_EXEC 0x00000080
#define PT_TRACE_VFORK_DONE 0x00000100
#define PT_TRACE_EXIT 0x00000200
-#define PT_ATTACHED 0x00000400 /* parent != real_parent */
#define PT_TRACE_MASK 0x000003f4
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
index ece8eb3..60c2a03 100644
--- a/include/linux/rcupreempt.h
+++ b/include/linux/rcupreempt.h
@@ -46,8 +46,8 @@
#define rcu_bh_qsctr_inc(cpu)
#define call_rcu_bh(head, rcu) call_rcu(head, rcu)
-extern void __rcu_read_lock(void);
-extern void __rcu_read_unlock(void);
+extern void __rcu_read_lock(void) __acquires(RCU);
+extern void __rcu_read_unlock(void) __releases(RCU);
extern int rcu_pending(int cpu);
extern int rcu_needs_cpu(int cpu);
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 422eab4..8e7eff2 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -287,7 +287,7 @@
/* Don't trust REISERFS_SB(sb)->s_bmap_nr, it's a u16
* which overflows on large file systems. */
-static inline u32 reiserfs_bmap_count(struct super_block *sb)
+static inline __u32 reiserfs_bmap_count(struct super_block *sb)
{
return (SB_BLOCK_COUNT(sb) - 1) / (sb->s_blocksize * 8) + 1;
}
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8a4812c1..00e1441 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -460,7 +460,7 @@
/* ITIMER_REAL timer for the process */
struct hrtimer real_timer;
- struct task_struct *tsk;
+ struct pid *leader_pid;
ktime_t it_real_incr;
/* ITIMER_PROF and ITIMER_VIRTUAL timers for the process */
@@ -1332,9 +1332,8 @@
* from various namespaces
*
* task_xid_nr() : global id, i.e. the id seen from the init namespace;
- * task_xid_vnr() : virtual id, i.e. the id seen from the namespace the task
- * belongs to. this only makes sence when called in the
- * context of the task that belongs to the same namespace;
+ * task_xid_vnr() : virtual id, i.e. the id seen from the pid namespace of
+ * current.
* task_xid_nr_ns() : id seen from the ns specified;
*
* set_task_vxid() : assigns a virtual id to a task;
@@ -1632,7 +1631,7 @@
extern struct task_struct *find_task_by_pid_ns(pid_t nr,
struct pid_namespace *ns);
-extern void __set_special_pids(pid_t session, pid_t pgrp);
+extern void __set_special_pids(struct pid *pid);
/* per-UID process charging. */
extern struct user_struct * alloc_uid(struct user_namespace *, uid_t);
@@ -1687,11 +1686,9 @@
extern void unblock_all_signals(void);
extern void release_task(struct task_struct * p);
extern int send_sig_info(int, struct siginfo *, struct task_struct *);
-extern int send_group_sig_info(int, struct siginfo *, struct task_struct *);
extern int force_sigsegv(int, struct task_struct *);
extern int force_sig_info(int, struct siginfo *, struct task_struct *);
extern int __kill_pgrp_info(int sig, struct siginfo *info, struct pid *pgrp);
-extern int kill_pgrp_info(int sig, struct siginfo *info, struct pid *pgrp);
extern int kill_pid_info(int sig, struct siginfo *info, struct pid *pid);
extern int kill_pid_info_as_uid(int, struct siginfo *, struct pid *, uid_t, uid_t, u32);
extern int kill_pgrp(struct pid *pid, int sig, int priv);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 9963f81..1a0b6cf 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -150,6 +150,10 @@
#define PORT_MCF 78
+/* MN10300 on-chip UART numbers */
+#define PORT_MN10300 80
+#define PORT_MN10300_CTS 81
+
#ifdef __KERNEL__
#include <linux/compiler.h>
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index f3c5189..8d5fb36 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -30,9 +30,12 @@
unsigned long free_blocks; /* How many are left for allocation */
unsigned long max_inodes; /* How many inodes are allowed */
unsigned long free_inodes; /* How many are left for allocation */
+ spinlock_t stat_lock; /* Serialize shmem_sb_info changes */
+ uid_t uid; /* Mount uid for root directory */
+ gid_t gid; /* Mount gid for root directory */
+ mode_t mode; /* Mount mode for root directory */
int policy; /* Default NUMA memory alloc policy */
nodemask_t policy_nodes; /* nodemask for preferred and bind */
- spinlock_t stat_lock;
};
static inline struct shmem_inode_info *SHMEM_I(struct inode *inode)
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 7e09514..42d2e0a 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -241,6 +241,7 @@
struct pt_regs;
extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie);
+extern void exit_signals(struct task_struct *tsk);
extern struct kmem_cache *sighand_cachep;
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 1244497..576a5f7 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -71,7 +71,7 @@
#define LOCK_SECTION_END \
".previous\n\t"
-#define __lockfunc fastcall __attribute__((section(".spinlock.text")))
+#define __lockfunc __attribute__((section(".spinlock.text")))
/*
* Pull the raw_spinlock_t and raw_rwlock_t definitions:
diff --git a/include/linux/time.h b/include/linux/time.h
index ceaab9f..2091a19 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -120,7 +120,7 @@
extern void monotonic_to_bootbased(struct timespec *ts);
extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
-extern int timekeeping_is_continuous(void);
+extern int timekeeping_valid_for_hres(void);
extern void update_wall_time(void);
extern void update_xtime_cache(u64 nsec);
diff --git a/include/linux/timer.h b/include/linux/timer.h
index de0e713..979fefd 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -35,8 +35,8 @@
struct timer_list _name = \
TIMER_INITIALIZER(_function, _expires, _data)
-void fastcall init_timer(struct timer_list * timer);
-void fastcall init_timer_deferrable(struct timer_list *timer);
+void init_timer(struct timer_list *timer);
+void init_timer_deferrable(struct timer_list *timer);
static inline void setup_timer(struct timer_list * timer,
void (*function)(unsigned long),
@@ -124,8 +124,6 @@
}
#endif
-extern void delayed_work_timer_fn(unsigned long __data);
-
/**
* add_timer - start a timer
* @timer: the timer to be added
diff --git a/include/linux/types.h b/include/linux/types.h
index b94c0e4..9dc2346 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -53,7 +53,7 @@
typedef __kernel_gid_t gid_t;
#endif /* __KERNEL__ */
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+#if defined(__GNUC__)
typedef __kernel_loff_t loff_t;
#endif
@@ -119,7 +119,7 @@
typedef __u16 uint16_t;
typedef __u32 uint32_t;
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+#if defined(__GNUC__)
typedef __u64 uint64_t;
typedef __u64 u_int64_t;
typedef __s64 int64_t;
@@ -181,7 +181,7 @@
typedef __u16 __bitwise __be16;
typedef __u32 __bitwise __le32;
typedef __u32 __bitwise __be32;
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+#if defined(__GNUC__)
typedef __u64 __bitwise __le64;
typedef __u64 __bitwise __be64;
#endif
diff --git a/include/linux/udf_fs.h b/include/linux/udf_fs.h
index 36c684e..aa88654 100644
--- a/include/linux/udf_fs.h
+++ b/include/linux/udf_fs.h
@@ -32,18 +32,15 @@
#define UDF_PREALLOCATE
#define UDF_DEFAULT_PREALLOC_BLOCKS 8
-#define UDFFS_DATE "2004/29/09"
-#define UDFFS_VERSION "0.9.8.1"
-
#undef UDFFS_DEBUG
#ifdef UDFFS_DEBUG
#define udf_debug(f, a...) \
- { \
+ do { \
printk (KERN_DEBUG "UDF-fs DEBUG %s:%d:%s: ", \
__FILE__, __LINE__, __FUNCTION__); \
printk (f, ##a); \
- }
+ } while (0)
#else
#define udf_debug(f, a...) /**/
#endif
diff --git a/include/linux/udf_fs_sb.h b/include/linux/udf_fs_sb.h
index 80ae9ef..9bc4735 100644
--- a/include/linux/udf_fs_sb.h
+++ b/include/linux/udf_fs_sb.h
@@ -75,7 +75,7 @@
struct udf_sb_info
{
struct udf_part_map *s_partmaps;
- __u8 s_volident[32];
+ __u8 s_volume_ident[32];
/* Overall info */
__u16 s_partitions;
@@ -84,9 +84,9 @@
/* Sector headers */
__s32 s_session;
__u32 s_anchor[4];
- __u32 s_lastblock;
+ __u32 s_last_block;
- struct buffer_head *s_lvidbh;
+ struct buffer_head *s_lvid_bh;
/* Default permissions */
mode_t s_umask;
@@ -94,10 +94,10 @@
uid_t s_uid;
/* Root Info */
- struct timespec s_recordtime;
+ struct timespec s_record_time;
/* Fileset Info */
- __u16 s_serialnum;
+ __u16 s_serial_number;
/* highest UDF revision we have recorded to this media */
__u16 s_udfrev;
@@ -109,7 +109,7 @@
struct nls_table *s_nls_map;
/* VAT inode */
- struct inode *s_vat;
+ struct inode *s_vat_inode;
struct mutex s_alloc_mutex;
};
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index 923db99..1123267 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -35,6 +35,7 @@
#include <linux/sched.h>
#include <linux/kref.h>
#include <linux/nsproxy.h>
+#include <linux/err.h>
#include <asm/atomic.h>
struct uts_namespace {
@@ -43,6 +44,7 @@
};
extern struct uts_namespace init_uts_ns;
+#ifdef CONFIG_UTS_NS
static inline void get_uts_ns(struct uts_namespace *ns)
{
kref_get(&ns->kref);
@@ -56,6 +58,25 @@
{
kref_put(&ns->kref, free_uts_ns);
}
+#else
+static inline void get_uts_ns(struct uts_namespace *ns)
+{
+}
+
+static inline void put_uts_ns(struct uts_namespace *ns)
+{
+}
+
+static inline struct uts_namespace *copy_utsname(unsigned long flags,
+ struct uts_namespace *ns)
+{
+ if (flags & CLONE_NEWUTS)
+ return ERR_PTR(-EINVAL);
+
+ return ns;
+}
+#endif
+
static inline struct new_utsname *utsname(void)
{
return ¤t->nsproxy->uts_ns->name;
diff --git a/init/Kconfig b/init/Kconfig
index 95ac265..455170e 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -214,27 +214,6 @@
Say N if unsure.
-config USER_NS
- bool "User Namespaces (EXPERIMENTAL)"
- default n
- depends on EXPERIMENTAL
- help
- Support user namespaces. This allows containers, i.e.
- vservers, to use user namespaces to provide different
- user info for different servers. If unsure, say N.
-
-config PID_NS
- bool "PID Namespaces (EXPERIMENTAL)"
- default n
- depends on EXPERIMENTAL
- help
- Suport process id namespaces. This allows having multiple
- process with the same pid as long as they are in different
- pid namespaces. This is a building block of containers.
-
- Unless you want to work with an experimental feature
- say N here.
-
config AUDIT
bool "Auditing support"
depends on NET
@@ -420,6 +399,49 @@
If unsure, say N.
+config NAMESPACES
+ bool "Namespaces support" if EMBEDDED
+ default !EMBEDDED
+ help
+ Provides the way to make tasks work with different objects using
+ the same id. For example same IPC id may refer to different objects
+ or same user id or pid may refer to different tasks when used in
+ different namespaces.
+
+config UTS_NS
+ bool "UTS namespace"
+ depends on NAMESPACES
+ help
+ In this namespace tasks see different info provided with the
+ uname() system call
+
+config IPC_NS
+ bool "IPC namespace"
+ depends on NAMESPACES && SYSVIPC
+ help
+ In this namespace tasks work with IPC ids which correspond to
+ different IPC objects in different namespaces
+
+config USER_NS
+ bool "User namespace (EXPERIMENTAL)"
+ depends on NAMESPACES && EXPERIMENTAL
+ help
+ This allows containers, i.e. vservers, to use user namespaces
+ to provide different user info for different servers.
+ If unsure, say N.
+
+config PID_NS
+ bool "PID Namespaces (EXPERIMENTAL)"
+ default n
+ depends on NAMESPACES && EXPERIMENTAL
+ help
+ Suport process id namespaces. This allows having multiple
+ process with the same pid as long as they are in different
+ pid namespaces. This is a building block of containers.
+
+ Unless you want to work with an experimental feature
+ say N here.
+
config BLK_DEV_INITRD
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
depends on BROKEN || !FRV
diff --git a/init/main.c b/init/main.c
index 2a78932..c59859b 100644
--- a/init/main.c
+++ b/init/main.c
@@ -238,22 +238,18 @@
static int __init debug_kernel(char *str)
{
- if (*str)
- return 0;
console_loglevel = 10;
- return 1;
+ return 0;
}
static int __init quiet_kernel(char *str)
{
- if (*str)
- return 0;
console_loglevel = 4;
- return 1;
+ return 0;
}
-__setup("debug", debug_kernel);
-__setup("quiet", quiet_kernel);
+early_param("debug", debug_kernel);
+early_param("quiet", quiet_kernel);
static int __init loglevel(char *str)
{
@@ -261,7 +257,7 @@
return 1;
}
-__setup("loglevel=", loglevel);
+early_param("loglevel", loglevel);
/*
* Unknown boot options get handed to init, unless they look like
@@ -833,7 +829,6 @@
*/
init_pid_ns.child_reaper = current;
- __set_special_pids(1, 1);
cad_pid = task_pid(current);
smp_prepare_cpus(setup_max_cpus);
diff --git a/ipc/Makefile b/ipc/Makefile
index b93bba6..5fc5e33 100644
--- a/ipc/Makefile
+++ b/ipc/Makefile
@@ -7,4 +7,5 @@
obj-$(CONFIG_SYSVIPC_SYSCTL) += ipc_sysctl.o
obj_mq-$(CONFIG_COMPAT) += compat_mq.o
obj-$(CONFIG_POSIX_MQUEUE) += mqueue.o msgutil.o $(obj_mq-y)
+obj-$(CONFIG_IPC_NS) += namespace.o
diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c
index 79e24e8..7f4235b 100644
--- a/ipc/ipc_sysctl.c
+++ b/ipc/ipc_sysctl.c
@@ -14,6 +14,7 @@
#include <linux/nsproxy.h>
#include <linux/sysctl.h>
#include <linux/uaccess.h>
+#include <linux/ipc_namespace.h>
static void *get_ipc(ctl_table *table)
{
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 6ca7b97..60f7a27 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -332,8 +332,7 @@
(info->notify_owner &&
info->notify.sigev_notify == SIGEV_SIGNAL) ?
info->notify.sigev_signo : 0,
- pid_nr_ns(info->notify_owner,
- current->nsproxy->pid_ns));
+ pid_vnr(info->notify_owner));
spin_unlock(&info->lock);
buffer[sizeof(buffer)-1] = '\0';
slen = strlen(buffer)+1;
@@ -510,7 +509,7 @@
sig_i.si_errno = 0;
sig_i.si_code = SI_MESGQ;
sig_i.si_value = info->notify.sigev_value;
- sig_i.si_pid = task_pid_vnr(current);
+ sig_i.si_pid = task_tgid_vnr(current);
sig_i.si_uid = current->uid;
kill_pid_info(info->notify.sigev_signo,
diff --git a/ipc/msg.c b/ipc/msg.c
index ec0c724..46585a0 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -36,6 +36,7 @@
#include <linux/seq_file.h>
#include <linux/rwsem.h>
#include <linux/nsproxy.h>
+#include <linux/ipc_namespace.h>
#include <asm/current.h>
#include <asm/uaccess.h>
@@ -66,72 +67,37 @@
#define SEARCH_NOTEQUAL 3
#define SEARCH_LESSEQUAL 4
-static struct ipc_ids init_msg_ids;
-
-#define msg_ids(ns) (*((ns)->ids[IPC_MSG_IDS]))
+#define msg_ids(ns) ((ns)->ids[IPC_MSG_IDS])
#define msg_unlock(msq) ipc_unlock(&(msq)->q_perm)
#define msg_buildid(id, seq) ipc_buildid(id, seq)
-static void freeque(struct ipc_namespace *, struct msg_queue *);
+static void freeque(struct ipc_namespace *, struct kern_ipc_perm *);
static int newque(struct ipc_namespace *, struct ipc_params *);
#ifdef CONFIG_PROC_FS
static int sysvipc_msg_proc_show(struct seq_file *s, void *it);
#endif
-static void __msg_init_ns(struct ipc_namespace *ns, struct ipc_ids *ids)
+void msg_init_ns(struct ipc_namespace *ns)
{
- ns->ids[IPC_MSG_IDS] = ids;
ns->msg_ctlmax = MSGMAX;
ns->msg_ctlmnb = MSGMNB;
ns->msg_ctlmni = MSGMNI;
atomic_set(&ns->msg_bytes, 0);
atomic_set(&ns->msg_hdrs, 0);
- ipc_init_ids(ids);
+ ipc_init_ids(&ns->ids[IPC_MSG_IDS]);
}
-int msg_init_ns(struct ipc_namespace *ns)
-{
- struct ipc_ids *ids;
-
- ids = kmalloc(sizeof(struct ipc_ids), GFP_KERNEL);
- if (ids == NULL)
- return -ENOMEM;
-
- __msg_init_ns(ns, ids);
- return 0;
-}
-
+#ifdef CONFIG_IPC_NS
void msg_exit_ns(struct ipc_namespace *ns)
{
- struct msg_queue *msq;
- struct kern_ipc_perm *perm;
- int next_id;
- int total, in_use;
-
- down_write(&msg_ids(ns).rw_mutex);
-
- in_use = msg_ids(ns).in_use;
-
- for (total = 0, next_id = 0; total < in_use; next_id++) {
- perm = idr_find(&msg_ids(ns).ipcs_idr, next_id);
- if (perm == NULL)
- continue;
- ipc_lock_by_ptr(perm);
- msq = container_of(perm, struct msg_queue, q_perm);
- freeque(ns, msq);
- total++;
- }
-
- up_write(&msg_ids(ns).rw_mutex);
-
- kfree(ns->ids[IPC_MSG_IDS]);
- ns->ids[IPC_MSG_IDS] = NULL;
+ free_ipcs(ns, &msg_ids(ns), freeque);
}
+#endif
void __init msg_init(void)
{
- __msg_init_ns(&init_ipc_ns, &init_msg_ids);
+ msg_init_ns(&init_ipc_ns);
ipc_init_proc_interface("sysvipc/msg",
" key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime\n",
IPC_MSG_IDS, sysvipc_msg_proc_show);
@@ -289,9 +255,10 @@
* msg_ids.rw_mutex (writer) and the spinlock for this message queue are held
* before freeque() is called. msg_ids.rw_mutex remains locked on exit.
*/
-static void freeque(struct ipc_namespace *ns, struct msg_queue *msq)
+static void freeque(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
{
struct list_head *tmp;
+ struct msg_queue *msq = container_of(ipcp, struct msg_queue, q_perm);
expunge_all(msq, -EIDRM);
ss_wakeup(&msq->q_senders, 1);
@@ -597,7 +564,7 @@
break;
}
case IPC_RMID:
- freeque(ns, msq);
+ freeque(ns, &msq->q_perm);
break;
}
err = 0;
diff --git a/ipc/namespace.c b/ipc/namespace.c
new file mode 100644
index 0000000..1b96765
--- /dev/null
+++ b/ipc/namespace.c
@@ -0,0 +1,86 @@
+/*
+ * linux/ipc/namespace.c
+ * Copyright (C) 2006 Pavel Emelyanov <xemul@openvz.org> OpenVZ, SWsoft Inc.
+ */
+
+#include <linux/ipc.h>
+#include <linux/msg.h>
+#include <linux/ipc_namespace.h>
+#include <linux/rcupdate.h>
+#include <linux/nsproxy.h>
+#include <linux/slab.h>
+
+#include "util.h"
+
+static struct ipc_namespace *clone_ipc_ns(struct ipc_namespace *old_ns)
+{
+ struct ipc_namespace *ns;
+
+ ns = kmalloc(sizeof(struct ipc_namespace), GFP_KERNEL);
+ if (ns == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ sem_init_ns(ns);
+ msg_init_ns(ns);
+ shm_init_ns(ns);
+
+ kref_init(&ns->kref);
+ return ns;
+}
+
+struct ipc_namespace *copy_ipcs(unsigned long flags, struct ipc_namespace *ns)
+{
+ struct ipc_namespace *new_ns;
+
+ BUG_ON(!ns);
+ get_ipc_ns(ns);
+
+ if (!(flags & CLONE_NEWIPC))
+ return ns;
+
+ new_ns = clone_ipc_ns(ns);
+
+ put_ipc_ns(ns);
+ return new_ns;
+}
+
+/*
+ * free_ipcs - free all ipcs of one type
+ * @ns: the namespace to remove the ipcs from
+ * @ids: the table of ipcs to free
+ * @free: the function called to free each individual ipc
+ *
+ * Called for each kind of ipc when an ipc_namespace exits.
+ */
+void free_ipcs(struct ipc_namespace *ns, struct ipc_ids *ids,
+ void (*free)(struct ipc_namespace *, struct kern_ipc_perm *))
+{
+ struct kern_ipc_perm *perm;
+ int next_id;
+ int total, in_use;
+
+ down_write(&ids->rw_mutex);
+
+ in_use = ids->in_use;
+
+ for (total = 0, next_id = 0; total < in_use; next_id++) {
+ perm = idr_find(&ids->ipcs_idr, next_id);
+ if (perm == NULL)
+ continue;
+ ipc_lock_by_ptr(perm);
+ free(ns, perm);
+ total++;
+ }
+ up_write(&ids->rw_mutex);
+}
+
+void free_ipc_ns(struct kref *kref)
+{
+ struct ipc_namespace *ns;
+
+ ns = container_of(kref, struct ipc_namespace, kref);
+ sem_exit_ns(ns);
+ msg_exit_ns(ns);
+ shm_exit_ns(ns);
+ kfree(ns);
+}
diff --git a/ipc/sem.c b/ipc/sem.c
index d65e285..0b45a4d 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -82,20 +82,19 @@
#include <linux/seq_file.h>
#include <linux/rwsem.h>
#include <linux/nsproxy.h>
+#include <linux/ipc_namespace.h>
#include <asm/uaccess.h>
#include "util.h"
-#define sem_ids(ns) (*((ns)->ids[IPC_SEM_IDS]))
+#define sem_ids(ns) ((ns)->ids[IPC_SEM_IDS])
#define sem_unlock(sma) ipc_unlock(&(sma)->sem_perm)
#define sem_checkid(sma, semid) ipc_checkid(&sma->sem_perm, semid)
#define sem_buildid(id, seq) ipc_buildid(id, seq)
-static struct ipc_ids init_sem_ids;
-
static int newary(struct ipc_namespace *, struct ipc_params *);
-static void freeary(struct ipc_namespace *, struct sem_array *);
+static void freeary(struct ipc_namespace *, struct kern_ipc_perm *);
#ifdef CONFIG_PROC_FS
static int sysvipc_sem_proc_show(struct seq_file *s, void *it);
#endif
@@ -117,58 +116,26 @@
#define sc_semopm sem_ctls[2]
#define sc_semmni sem_ctls[3]
-static void __sem_init_ns(struct ipc_namespace *ns, struct ipc_ids *ids)
+void sem_init_ns(struct ipc_namespace *ns)
{
- ns->ids[IPC_SEM_IDS] = ids;
ns->sc_semmsl = SEMMSL;
ns->sc_semmns = SEMMNS;
ns->sc_semopm = SEMOPM;
ns->sc_semmni = SEMMNI;
ns->used_sems = 0;
- ipc_init_ids(ids);
+ ipc_init_ids(&ns->ids[IPC_SEM_IDS]);
}
-int sem_init_ns(struct ipc_namespace *ns)
-{
- struct ipc_ids *ids;
-
- ids = kmalloc(sizeof(struct ipc_ids), GFP_KERNEL);
- if (ids == NULL)
- return -ENOMEM;
-
- __sem_init_ns(ns, ids);
- return 0;
-}
-
+#ifdef CONFIG_IPC_NS
void sem_exit_ns(struct ipc_namespace *ns)
{
- struct sem_array *sma;
- struct kern_ipc_perm *perm;
- int next_id;
- int total, in_use;
-
- down_write(&sem_ids(ns).rw_mutex);
-
- in_use = sem_ids(ns).in_use;
-
- for (total = 0, next_id = 0; total < in_use; next_id++) {
- perm = idr_find(&sem_ids(ns).ipcs_idr, next_id);
- if (perm == NULL)
- continue;
- ipc_lock_by_ptr(perm);
- sma = container_of(perm, struct sem_array, sem_perm);
- freeary(ns, sma);
- total++;
- }
- up_write(&sem_ids(ns).rw_mutex);
-
- kfree(ns->ids[IPC_SEM_IDS]);
- ns->ids[IPC_SEM_IDS] = NULL;
+ free_ipcs(ns, &sem_ids(ns), freeary);
}
+#endif
void __init sem_init (void)
{
- __sem_init_ns(&init_ipc_ns, &init_sem_ids);
+ sem_init_ns(&init_ipc_ns);
ipc_init_proc_interface("sysvipc/sem",
" key semid perms nsems uid gid cuid cgid otime ctime\n",
IPC_SEM_IDS, sysvipc_sem_proc_show);
@@ -557,10 +524,11 @@
* as a writer and the spinlock for this semaphore set hold. sem_ids.rw_mutex
* remains locked on exit.
*/
-static void freeary(struct ipc_namespace *ns, struct sem_array *sma)
+static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
{
struct sem_undo *un;
struct sem_queue *q;
+ struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
/* Invalidate the existing undo structures for this semaphore set.
* (They will be freed without any further action in exit_sem()
@@ -614,8 +582,8 @@
}
}
-static int semctl_nolock(struct ipc_namespace *ns, int semid, int semnum,
- int cmd, int version, union semun arg)
+static int semctl_nolock(struct ipc_namespace *ns, int semid,
+ int cmd, int version, union semun arg)
{
int err = -EINVAL;
struct sem_array *sma;
@@ -654,14 +622,23 @@
return -EFAULT;
return (max_id < 0) ? 0: max_id;
}
+ case IPC_STAT:
case SEM_STAT:
{
struct semid64_ds tbuf;
int id;
- sma = sem_lock(ns, semid);
- if (IS_ERR(sma))
- return PTR_ERR(sma);
+ if (cmd == SEM_STAT) {
+ sma = sem_lock(ns, semid);
+ if (IS_ERR(sma))
+ return PTR_ERR(sma);
+ id = sma->sem_perm.id;
+ } else {
+ sma = sem_lock_check(ns, semid);
+ if (IS_ERR(sma))
+ return PTR_ERR(sma);
+ id = 0;
+ }
err = -EACCES;
if (ipcperms (&sma->sem_perm, S_IRUGO))
@@ -671,8 +648,6 @@
if (err)
goto out_unlock;
- id = sma->sem_perm.id;
-
memset(&tbuf, 0, sizeof(tbuf));
kernel_to_ipc64_perm(&sma->sem_perm, &tbuf.sem_perm);
@@ -807,19 +782,6 @@
err = 0;
goto out_unlock;
}
- case IPC_STAT:
- {
- struct semid64_ds tbuf;
- memset(&tbuf,0,sizeof(tbuf));
- kernel_to_ipc64_perm(&sma->sem_perm, &tbuf.sem_perm);
- tbuf.sem_otime = sma->sem_otime;
- tbuf.sem_ctime = sma->sem_ctime;
- tbuf.sem_nsems = sma->sem_nsems;
- sem_unlock(sma);
- if (copy_semid_to_user (arg.buf, &tbuf, version))
- return -EFAULT;
- return 0;
- }
/* GETVAL, GETPID, GETNCTN, GETZCNT, SETVAL: fall-through */
}
err = -EINVAL;
@@ -947,7 +909,7 @@
switch(cmd){
case IPC_RMID:
- freeary(ns, sma);
+ freeary(ns, ipcp);
err = 0;
break;
case IPC_SET:
@@ -986,15 +948,15 @@
switch(cmd) {
case IPC_INFO:
case SEM_INFO:
+ case IPC_STAT:
case SEM_STAT:
- err = semctl_nolock(ns,semid,semnum,cmd,version,arg);
+ err = semctl_nolock(ns, semid, cmd, version, arg);
return err;
case GETALL:
case GETVAL:
case GETPID:
case GETNCNT:
case GETZCNT:
- case IPC_STAT:
case SETVAL:
case SETALL:
err = semctl_main(ns,semid,semnum,cmd,version,arg);
diff --git a/ipc/shm.c b/ipc/shm.c
index 65c3a29..c47e872 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -38,6 +38,7 @@
#include <linux/rwsem.h>
#include <linux/nsproxy.h>
#include <linux/mount.h>
+#include <linux/ipc_namespace.h>
#include <asm/uaccess.h>
@@ -55,9 +56,7 @@
static const struct file_operations shm_file_operations;
static struct vm_operations_struct shm_vm_ops;
-static struct ipc_ids init_shm_ids;
-
-#define shm_ids(ns) (*((ns)->ids[IPC_SHM_IDS]))
+#define shm_ids(ns) ((ns)->ids[IPC_SHM_IDS])
#define shm_unlock(shp) \
ipc_unlock(&(shp)->shm_perm)
@@ -71,22 +70,24 @@
static int sysvipc_shm_proc_show(struct seq_file *s, void *it);
#endif
-static void __shm_init_ns(struct ipc_namespace *ns, struct ipc_ids *ids)
+void shm_init_ns(struct ipc_namespace *ns)
{
- ns->ids[IPC_SHM_IDS] = ids;
ns->shm_ctlmax = SHMMAX;
ns->shm_ctlall = SHMALL;
ns->shm_ctlmni = SHMMNI;
ns->shm_tot = 0;
- ipc_init_ids(ids);
+ ipc_init_ids(&ns->ids[IPC_SHM_IDS]);
}
/*
* Called with shm_ids.rw_mutex (writer) and the shp structure locked.
* Only shm_ids.rw_mutex remains locked on exit.
*/
-static void do_shm_rmid(struct ipc_namespace *ns, struct shmid_kernel *shp)
+static void do_shm_rmid(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
{
+ struct shmid_kernel *shp;
+ shp = container_of(ipcp, struct shmid_kernel, shm_perm);
+
if (shp->shm_nattch){
shp->shm_perm.mode |= SHM_DEST;
/* Do not find it any more */
@@ -96,47 +97,16 @@
shm_destroy(ns, shp);
}
-int shm_init_ns(struct ipc_namespace *ns)
-{
- struct ipc_ids *ids;
-
- ids = kmalloc(sizeof(struct ipc_ids), GFP_KERNEL);
- if (ids == NULL)
- return -ENOMEM;
-
- __shm_init_ns(ns, ids);
- return 0;
-}
-
+#ifdef CONFIG_IPC_NS
void shm_exit_ns(struct ipc_namespace *ns)
{
- struct shmid_kernel *shp;
- struct kern_ipc_perm *perm;
- int next_id;
- int total, in_use;
-
- down_write(&shm_ids(ns).rw_mutex);
-
- in_use = shm_ids(ns).in_use;
-
- for (total = 0, next_id = 0; total < in_use; next_id++) {
- perm = idr_find(&shm_ids(ns).ipcs_idr, next_id);
- if (perm == NULL)
- continue;
- ipc_lock_by_ptr(perm);
- shp = container_of(perm, struct shmid_kernel, shm_perm);
- do_shm_rmid(ns, shp);
- total++;
- }
- up_write(&shm_ids(ns).rw_mutex);
-
- kfree(ns->ids[IPC_SHM_IDS]);
- ns->ids[IPC_SHM_IDS] = NULL;
+ free_ipcs(ns, &shm_ids(ns), do_shm_rmid);
}
+#endif
void __init shm_init (void)
{
- __shm_init_ns(&init_ipc_ns, &init_shm_ids);
+ shm_init_ns(&init_ipc_ns);
ipc_init_proc_interface("sysvipc/shm",
" key shmid perms size cpid lpid nattch uid gid cuid cgid atime dtime ctime\n",
IPC_SHM_IDS, sysvipc_shm_proc_show);
@@ -847,7 +817,7 @@
if (err)
goto out_unlock_up;
- do_shm_rmid(ns, shp);
+ do_shm_rmid(ns, &shp->shm_perm);
up_write(&shm_ids(ns).rw_mutex);
goto out;
}
diff --git a/ipc/util.c b/ipc/util.c
index 76c1f34..fd1b50d 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -33,6 +33,7 @@
#include <linux/audit.h>
#include <linux/nsproxy.h>
#include <linux/rwsem.h>
+#include <linux/ipc_namespace.h>
#include <asm/unistd.h>
@@ -51,66 +52,6 @@
},
};
-static struct ipc_namespace *clone_ipc_ns(struct ipc_namespace *old_ns)
-{
- int err;
- struct ipc_namespace *ns;
-
- err = -ENOMEM;
- ns = kmalloc(sizeof(struct ipc_namespace), GFP_KERNEL);
- if (ns == NULL)
- goto err_mem;
-
- err = sem_init_ns(ns);
- if (err)
- goto err_sem;
- err = msg_init_ns(ns);
- if (err)
- goto err_msg;
- err = shm_init_ns(ns);
- if (err)
- goto err_shm;
-
- kref_init(&ns->kref);
- return ns;
-
-err_shm:
- msg_exit_ns(ns);
-err_msg:
- sem_exit_ns(ns);
-err_sem:
- kfree(ns);
-err_mem:
- return ERR_PTR(err);
-}
-
-struct ipc_namespace *copy_ipcs(unsigned long flags, struct ipc_namespace *ns)
-{
- struct ipc_namespace *new_ns;
-
- BUG_ON(!ns);
- get_ipc_ns(ns);
-
- if (!(flags & CLONE_NEWIPC))
- return ns;
-
- new_ns = clone_ipc_ns(ns);
-
- put_ipc_ns(ns);
- return new_ns;
-}
-
-void free_ipc_ns(struct kref *kref)
-{
- struct ipc_namespace *ns;
-
- ns = container_of(kref, struct ipc_namespace, kref);
- sem_exit_ns(ns);
- msg_exit_ns(ns);
- shm_exit_ns(ns);
- kfree(ns);
-}
-
/**
* ipc_init - initialise IPC subsystem
*
@@ -307,7 +248,7 @@
* This routine is called by sys_msgget, sys_semget() and sys_shmget()
* when the key is IPC_PRIVATE.
*/
-int ipcget_new(struct ipc_namespace *ns, struct ipc_ids *ids,
+static int ipcget_new(struct ipc_namespace *ns, struct ipc_ids *ids,
struct ipc_ops *ops, struct ipc_params *params)
{
int err;
@@ -371,7 +312,7 @@
*
* On success, the ipc id is returned.
*/
-int ipcget_public(struct ipc_namespace *ns, struct ipc_ids *ids,
+static int ipcget_public(struct ipc_namespace *ns, struct ipc_ids *ids,
struct ipc_ops *ops, struct ipc_params *params)
{
struct kern_ipc_perm *ipcp;
@@ -769,6 +710,57 @@
return out;
}
+struct kern_ipc_perm *ipc_lock_check_down(struct ipc_ids *ids, int id)
+{
+ struct kern_ipc_perm *out;
+
+ out = ipc_lock_down(ids, id);
+ if (IS_ERR(out))
+ return out;
+
+ if (ipc_checkid(out, id)) {
+ ipc_unlock(out);
+ return ERR_PTR(-EIDRM);
+ }
+
+ return out;
+}
+
+struct kern_ipc_perm *ipc_lock_check(struct ipc_ids *ids, int id)
+{
+ struct kern_ipc_perm *out;
+
+ out = ipc_lock(ids, id);
+ if (IS_ERR(out))
+ return out;
+
+ if (ipc_checkid(out, id)) {
+ ipc_unlock(out);
+ return ERR_PTR(-EIDRM);
+ }
+
+ return out;
+}
+
+/**
+ * ipcget - Common sys_*get() code
+ * @ns : namsepace
+ * @ids : IPC identifier set
+ * @ops : operations to be called on ipc object creation, permission checks
+ * and further checks
+ * @params : the parameters needed by the previous operations.
+ *
+ * Common routine called by sys_msgget(), sys_semget() and sys_shmget().
+ */
+int ipcget(struct ipc_namespace *ns, struct ipc_ids *ids,
+ struct ipc_ops *ops, struct ipc_params *params)
+{
+ if (params->key == IPC_PRIVATE)
+ return ipcget_new(ns, ids, ops, params);
+ else
+ return ipcget_public(ns, ids, ops, params);
+}
+
#ifdef __ARCH_WANT_IPC_PARSE_VERSION
@@ -841,7 +833,7 @@
if (ipc && ipc != SEQ_START_TOKEN)
ipc_unlock(ipc);
- return sysvipc_find_ipc(iter->ns->ids[iface->ids], *pos, pos);
+ return sysvipc_find_ipc(&iter->ns->ids[iface->ids], *pos, pos);
}
/*
@@ -854,7 +846,7 @@
struct ipc_proc_iface *iface = iter->iface;
struct ipc_ids *ids;
- ids = iter->ns->ids[iface->ids];
+ ids = &iter->ns->ids[iface->ids];
/*
* Take the lock - this will be released by the corresponding
@@ -885,7 +877,7 @@
if (ipc && ipc != SEQ_START_TOKEN)
ipc_unlock(ipc);
- ids = iter->ns->ids[iface->ids];
+ ids = &iter->ns->ids[iface->ids];
/* Release the lock we took in start() */
up_read(&ids->rw_mutex);
}
diff --git a/ipc/util.h b/ipc/util.h
index 9ffea40..f37d160 100644
--- a/ipc/util.h
+++ b/ipc/util.h
@@ -10,7 +10,6 @@
#ifndef _IPC_UTIL_H
#define _IPC_UTIL_H
-#include <linux/idr.h>
#include <linux/err.h>
#define USHRT_MAX 0xffff
@@ -20,22 +19,16 @@
void msg_init (void);
void shm_init (void);
-int sem_init_ns(struct ipc_namespace *ns);
-int msg_init_ns(struct ipc_namespace *ns);
-int shm_init_ns(struct ipc_namespace *ns);
+struct ipc_namespace;
+
+void sem_init_ns(struct ipc_namespace *ns);
+void msg_init_ns(struct ipc_namespace *ns);
+void shm_init_ns(struct ipc_namespace *ns);
void sem_exit_ns(struct ipc_namespace *ns);
void msg_exit_ns(struct ipc_namespace *ns);
void shm_exit_ns(struct ipc_namespace *ns);
-struct ipc_ids {
- int in_use;
- unsigned short seq;
- unsigned short seq_max;
- struct rw_semaphore rw_mutex;
- struct idr ipcs_idr;
-};
-
/*
* Structure that holds the parameters needed by the ipc operations
* (see after)
@@ -66,6 +59,7 @@
};
struct seq_file;
+struct ipc_ids;
void ipc_init_ids(struct ipc_ids *);
#ifdef CONFIG_PROC_FS
@@ -129,10 +123,6 @@
extern void free_msg(struct msg_msg *msg);
extern struct msg_msg *load_msg(const void __user *src, int len);
extern int store_msg(void __user *dest, struct msg_msg *msg, int len);
-extern int ipcget_new(struct ipc_namespace *, struct ipc_ids *,
- struct ipc_ops *, struct ipc_params *);
-extern int ipcget_public(struct ipc_namespace *, struct ipc_ids *,
- struct ipc_ops *, struct ipc_params *);
static inline int ipc_buildid(int id, int seq)
{
@@ -161,57 +151,9 @@
rcu_read_unlock();
}
-static inline struct kern_ipc_perm *ipc_lock_check_down(struct ipc_ids *ids,
- int id)
-{
- struct kern_ipc_perm *out;
-
- out = ipc_lock_down(ids, id);
- if (IS_ERR(out))
- return out;
-
- if (ipc_checkid(out, id)) {
- ipc_unlock(out);
- return ERR_PTR(-EIDRM);
- }
-
- return out;
-}
-
-static inline struct kern_ipc_perm *ipc_lock_check(struct ipc_ids *ids,
- int id)
-{
- struct kern_ipc_perm *out;
-
- out = ipc_lock(ids, id);
- if (IS_ERR(out))
- return out;
-
- if (ipc_checkid(out, id)) {
- ipc_unlock(out);
- return ERR_PTR(-EIDRM);
- }
-
- return out;
-}
-
-/**
- * ipcget - Common sys_*get() code
- * @ns : namsepace
- * @ids : IPC identifier set
- * @ops : operations to be called on ipc object creation, permission checks
- * and further checks
- * @params : the parameters needed by the previous operations.
- *
- * Common routine called by sys_msgget(), sys_semget() and sys_shmget().
- */
-static inline int ipcget(struct ipc_namespace *ns, struct ipc_ids *ids,
- struct ipc_ops *ops, struct ipc_params *params)
-{
- if (params->key == IPC_PRIVATE)
- return ipcget_new(ns, ids, ops, params);
- else
- return ipcget_public(ns, ids, ops, params);
-}
+struct kern_ipc_perm *ipc_lock_check_down(struct ipc_ids *ids, int id);
+struct kern_ipc_perm *ipc_lock_check(struct ipc_ids *ids, int id);
+int ipcget(struct ipc_namespace *ns, struct ipc_ids *ids,
+ struct ipc_ops *ops, struct ipc_params *params);
#endif
diff --git a/kernel/Makefile b/kernel/Makefile
index 685697c..6c584c5 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -4,12 +4,12 @@
obj-y = sched.o fork.o exec_domain.o panic.o printk.o profile.o \
exit.o itimer.o time.o softirq.o resource.o \
- sysctl.o capability.o ptrace.o timer.o user.o user_namespace.o \
+ sysctl.o capability.o ptrace.o timer.o user.o \
signal.o sys.o kmod.o workqueue.o pid.o \
rcupdate.o extable.o params.o posix-timers.o \
kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \
hrtimer.o rwsem.o nsproxy.o srcu.o \
- utsname.o notifier.o ksysfs.o pm_qos_params.o
+ notifier.o ksysfs.o pm_qos_params.o
obj-$(CONFIG_SYSCTL) += sysctl_check.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
@@ -42,6 +42,9 @@
obj-$(CONFIG_CGROUP_DEBUG) += cgroup_debug.o
obj-$(CONFIG_CPUSETS) += cpuset.o
obj-$(CONFIG_CGROUP_NS) += ns_cgroup.o
+obj-$(CONFIG_UTS_NS) += utsname.o
+obj-$(CONFIG_USER_NS) += user_namespace.o
+obj-$(CONFIG_PID_NS) += pid_namespace.o
obj-$(CONFIG_IKCONFIG) += configs.o
obj-$(CONFIG_RESOURCE_COUNTERS) += res_counter.o
obj-$(CONFIG_STOP_MACHINE) += stop_machine.o
@@ -88,3 +91,11 @@
targets += config_data.h
$(obj)/config_data.h: $(obj)/config_data.gz FORCE
$(call if_changed,ikconfiggz)
+
+$(obj)/time.o: $(obj)/timeconst.h
+
+quiet_cmd_timeconst = TIMEC $@
+ cmd_timeconst = $(PERL) $< $(CONFIG_HZ) > $@
+targets += timeconst.h
+$(obj)/timeconst.h: $(src)/timeconst.pl FORCE
+ $(call if_changed,timeconst)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index e0d3a4f..2eff3f6 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -389,7 +389,7 @@
return error;
}
-void enable_nonboot_cpus(void)
+void __ref enable_nonboot_cpus(void)
{
int cpu, error;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 67b2bfe..3e296ed 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2255,13 +2255,14 @@
#endif /* CONFIG_PROC_PID_CPUSET */
/* Display task cpus_allowed, mems_allowed in /proc/<pid>/status file. */
-char *cpuset_task_status_allowed(struct task_struct *task, char *buffer)
+void cpuset_task_status_allowed(struct seq_file *m, struct task_struct *task)
{
- buffer += sprintf(buffer, "Cpus_allowed:\t");
- buffer += cpumask_scnprintf(buffer, PAGE_SIZE, task->cpus_allowed);
- buffer += sprintf(buffer, "\n");
- buffer += sprintf(buffer, "Mems_allowed:\t");
- buffer += nodemask_scnprintf(buffer, PAGE_SIZE, task->mems_allowed);
- buffer += sprintf(buffer, "\n");
- return buffer;
+ seq_printf(m, "Cpus_allowed:\t");
+ m->count += cpumask_scnprintf(m->buf + m->count, m->size - m->count,
+ task->cpus_allowed);
+ seq_printf(m, "\n");
+ seq_printf(m, "Mems_allowed:\t");
+ m->count += nodemask_scnprintf(m->buf + m->count, m->size - m->count,
+ task->mems_allowed);
+ seq_printf(m, "\n");
}
diff --git a/kernel/exit.c b/kernel/exit.c
index eb9934a..3b893e7 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -293,26 +293,27 @@
switch_uid(INIT_USER);
}
-void __set_special_pids(pid_t session, pid_t pgrp)
+void __set_special_pids(struct pid *pid)
{
struct task_struct *curr = current->group_leader;
+ pid_t nr = pid_nr(pid);
- if (task_session_nr(curr) != session) {
+ if (task_session(curr) != pid) {
detach_pid(curr, PIDTYPE_SID);
- set_task_session(curr, session);
- attach_pid(curr, PIDTYPE_SID, find_pid(session));
+ attach_pid(curr, PIDTYPE_SID, pid);
+ set_task_session(curr, nr);
}
- if (task_pgrp_nr(curr) != pgrp) {
+ if (task_pgrp(curr) != pid) {
detach_pid(curr, PIDTYPE_PGID);
- set_task_pgrp(curr, pgrp);
- attach_pid(curr, PIDTYPE_PGID, find_pid(pgrp));
+ attach_pid(curr, PIDTYPE_PGID, pid);
+ set_task_pgrp(curr, nr);
}
}
-static void set_special_pids(pid_t session, pid_t pgrp)
+static void set_special_pids(struct pid *pid)
{
write_lock_irq(&tasklist_lock);
- __set_special_pids(session, pgrp);
+ __set_special_pids(pid);
write_unlock_irq(&tasklist_lock);
}
@@ -383,7 +384,11 @@
*/
current->flags |= PF_NOFREEZE;
- set_special_pids(1, 1);
+ if (current->nsproxy != &init_nsproxy) {
+ get_nsproxy(&init_nsproxy);
+ switch_task_namespaces(current, &init_nsproxy);
+ }
+ set_special_pids(&init_struct_pid);
proc_clear_tty(current);
/* Block and flush all signals */
@@ -398,11 +403,6 @@
current->fs = fs;
atomic_inc(&fs->count);
- if (current->nsproxy != init_task.nsproxy) {
- get_nsproxy(init_task.nsproxy);
- switch_task_namespaces(current, init_task.nsproxy);
- }
-
exit_files(current);
current->files = init_task.files;
atomic_inc(¤t->files->count);
@@ -458,7 +458,7 @@
return files;
}
-void fastcall put_files_struct(struct files_struct *files)
+void put_files_struct(struct files_struct *files)
{
struct fdtable *fdt;
@@ -745,24 +745,6 @@
struct task_struct *t;
struct pid *pgrp;
- if (signal_pending(tsk) && !(tsk->signal->flags & SIGNAL_GROUP_EXIT)
- && !thread_group_empty(tsk)) {
- /*
- * This occurs when there was a race between our exit
- * syscall and a group signal choosing us as the one to
- * wake up. It could be that we are the only thread
- * alerted to check for pending signals, but another thread
- * should be woken now to take the signal since we will not.
- * Now we'll wake all the threads in the group just to make
- * sure someone gets all the pending signals.
- */
- spin_lock_irq(&tsk->sighand->siglock);
- for (t = next_thread(tsk); t != tsk; t = next_thread(t))
- if (!signal_pending(t) && !(t->flags & PF_EXITING))
- recalc_sigpending_and_wake(t);
- spin_unlock_irq(&tsk->sighand->siglock);
- }
-
/*
* This does two things:
*
@@ -905,7 +887,7 @@
zap_pid_ns_processes(tsk->nsproxy->pid_ns);
}
-fastcall NORET_TYPE void do_exit(long code)
+NORET_TYPE void do_exit(long code)
{
struct task_struct *tsk = current;
int group_dead;
@@ -947,7 +929,7 @@
schedule();
}
- tsk->flags |= PF_EXITING;
+ exit_signals(tsk); /* sets PF_EXITING */
/*
* tsk->flags are checked in the futex code to protect against
* an exiting task cleaning up the robust pi futexes.
@@ -1108,20 +1090,23 @@
do_group_exit((error_code & 0xff) << 8);
}
-static int eligible_child(pid_t pid, int options, struct task_struct *p)
+static struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
+{
+ struct pid *pid = NULL;
+ if (type == PIDTYPE_PID)
+ pid = task->pids[type].pid;
+ else if (type < PIDTYPE_MAX)
+ pid = task->group_leader->pids[type].pid;
+ return pid;
+}
+
+static int eligible_child(enum pid_type type, struct pid *pid, int options,
+ struct task_struct *p)
{
int err;
- struct pid_namespace *ns;
- ns = current->nsproxy->pid_ns;
- if (pid > 0) {
- if (task_pid_nr_ns(p, ns) != pid)
- return 0;
- } else if (!pid) {
- if (task_pgrp_nr_ns(p, ns) != task_pgrp_vnr(current))
- return 0;
- } else if (pid != -1) {
- if (task_pgrp_nr_ns(p, ns) != -pid)
+ if (type < PIDTYPE_MAX) {
+ if (task_pid_type(p, type) != pid)
return 0;
}
@@ -1140,18 +1125,16 @@
if (((p->exit_signal != SIGCHLD) ^ ((options & __WCLONE) != 0))
&& !(options & __WALL))
return 0;
- /*
- * Do not consider thread group leaders that are
- * in a non-empty thread group:
- */
- if (delay_group_leader(p))
- return 2;
err = security_task_wait(p);
- if (err)
- return err;
+ if (likely(!err))
+ return 1;
- return 1;
+ if (type != PIDTYPE_PID)
+ return 0;
+ /* This child was explicitly requested, abort */
+ read_unlock(&tasklist_lock);
+ return err;
}
static int wait_noreap_copyout(struct task_struct *p, pid_t pid, uid_t uid,
@@ -1191,20 +1174,13 @@
{
unsigned long state;
int retval, status, traced;
- struct pid_namespace *ns;
-
- ns = current->nsproxy->pid_ns;
+ pid_t pid = task_pid_vnr(p);
if (unlikely(noreap)) {
- pid_t pid = task_pid_nr_ns(p, ns);
uid_t uid = p->uid;
int exit_code = p->exit_code;
int why, status;
- if (unlikely(p->exit_state != EXIT_ZOMBIE))
- return 0;
- if (unlikely(p->exit_signal == -1 && p->ptrace == 0))
- return 0;
get_task_struct(p);
read_unlock(&tasklist_lock);
if ((exit_code & 0x7f) == 0) {
@@ -1315,11 +1291,11 @@
retval = put_user(status, &infop->si_status);
}
if (!retval && infop)
- retval = put_user(task_pid_nr_ns(p, ns), &infop->si_pid);
+ retval = put_user(pid, &infop->si_pid);
if (!retval && infop)
retval = put_user(p->uid, &infop->si_uid);
if (!retval)
- retval = task_pid_nr_ns(p, ns);
+ retval = pid;
if (traced) {
write_lock_irq(&tasklist_lock);
@@ -1351,21 +1327,38 @@
* the lock and this task is uninteresting. If we return nonzero, we have
* released the lock and the system call should return.
*/
-static int wait_task_stopped(struct task_struct *p, int delayed_group_leader,
+static int wait_task_stopped(struct task_struct *p,
int noreap, struct siginfo __user *infop,
int __user *stat_addr, struct rusage __user *ru)
{
- int retval, exit_code;
+ int retval, exit_code, why;
+ uid_t uid = 0; /* unneeded, required by compiler */
pid_t pid;
- if (!p->exit_code)
- return 0;
- if (delayed_group_leader && !(p->ptrace & PT_PTRACED) &&
- p->signal->group_stop_count > 0)
+ exit_code = 0;
+ spin_lock_irq(&p->sighand->siglock);
+
+ if (unlikely(!task_is_stopped_or_traced(p)))
+ goto unlock_sig;
+
+ if (!(p->ptrace & PT_PTRACED) && p->signal->group_stop_count > 0)
/*
* A group stop is in progress and this is the group leader.
* We won't report until all threads have stopped.
*/
+ goto unlock_sig;
+
+ exit_code = p->exit_code;
+ if (!exit_code)
+ goto unlock_sig;
+
+ if (!noreap)
+ p->exit_code = 0;
+
+ uid = p->uid;
+unlock_sig:
+ spin_unlock_irq(&p->sighand->siglock);
+ if (!exit_code)
return 0;
/*
@@ -1375,65 +1368,15 @@
* keep holding onto the tasklist_lock while we call getrusage and
* possibly take page faults for user memory.
*/
- pid = task_pid_nr_ns(p, current->nsproxy->pid_ns);
get_task_struct(p);
+ pid = task_pid_vnr(p);
+ why = (p->ptrace & PT_PTRACED) ? CLD_TRAPPED : CLD_STOPPED;
read_unlock(&tasklist_lock);
- if (unlikely(noreap)) {
- uid_t uid = p->uid;
- int why = (p->ptrace & PT_PTRACED) ? CLD_TRAPPED : CLD_STOPPED;
-
- exit_code = p->exit_code;
- if (unlikely(!exit_code) || unlikely(p->exit_state))
- goto bail_ref;
+ if (unlikely(noreap))
return wait_noreap_copyout(p, pid, uid,
why, exit_code,
infop, ru);
- }
-
- write_lock_irq(&tasklist_lock);
-
- /*
- * This uses xchg to be atomic with the thread resuming and setting
- * it. It must also be done with the write lock held to prevent a
- * race with the EXIT_ZOMBIE case.
- */
- exit_code = xchg(&p->exit_code, 0);
- if (unlikely(p->exit_state)) {
- /*
- * The task resumed and then died. Let the next iteration
- * catch it in EXIT_ZOMBIE. Note that exit_code might
- * already be zero here if it resumed and did _exit(0).
- * The task itself is dead and won't touch exit_code again;
- * other processors in this function are locked out.
- */
- p->exit_code = exit_code;
- exit_code = 0;
- }
- if (unlikely(exit_code == 0)) {
- /*
- * Another thread in this function got to it first, or it
- * resumed, or it resumed and then died.
- */
- write_unlock_irq(&tasklist_lock);
-bail_ref:
- put_task_struct(p);
- /*
- * We are returning to the wait loop without having successfully
- * removed the process and having released the lock. We cannot
- * continue, since the "p" task pointer is potentially stale.
- *
- * Return -EAGAIN, and do_wait() will restart the loop from the
- * beginning. Do _not_ re-acquire the lock.
- */
- return -EAGAIN;
- }
-
- /* move to end of parent's list to avoid starvation */
- remove_parent(p);
- add_parent(p);
-
- write_unlock_irq(&tasklist_lock);
retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
if (!retval && stat_addr)
@@ -1443,15 +1386,13 @@
if (!retval && infop)
retval = put_user(0, &infop->si_errno);
if (!retval && infop)
- retval = put_user((short)((p->ptrace & PT_PTRACED)
- ? CLD_TRAPPED : CLD_STOPPED),
- &infop->si_code);
+ retval = put_user(why, &infop->si_code);
if (!retval && infop)
retval = put_user(exit_code, &infop->si_status);
if (!retval && infop)
retval = put_user(pid, &infop->si_pid);
if (!retval && infop)
- retval = put_user(p->uid, &infop->si_uid);
+ retval = put_user(uid, &infop->si_uid);
if (!retval)
retval = pid;
put_task_struct(p);
@@ -1473,7 +1414,6 @@
int retval;
pid_t pid;
uid_t uid;
- struct pid_namespace *ns;
if (!(p->signal->flags & SIGNAL_STOP_CONTINUED))
return 0;
@@ -1488,8 +1428,7 @@
p->signal->flags &= ~SIGNAL_STOP_CONTINUED;
spin_unlock_irq(&p->sighand->siglock);
- ns = current->nsproxy->pid_ns;
- pid = task_pid_nr_ns(p, ns);
+ pid = task_pid_vnr(p);
uid = p->uid;
get_task_struct(p);
read_unlock(&tasklist_lock);
@@ -1500,7 +1439,7 @@
if (!retval && stat_addr)
retval = put_user(0xffff, stat_addr);
if (!retval)
- retval = task_pid_nr_ns(p, ns);
+ retval = pid;
} else {
retval = wait_noreap_copyout(p, pid, uid,
CLD_CONTINUED, SIGCONT,
@@ -1511,101 +1450,63 @@
return retval;
}
-
-static inline int my_ptrace_child(struct task_struct *p)
-{
- if (!(p->ptrace & PT_PTRACED))
- return 0;
- if (!(p->ptrace & PT_ATTACHED))
- return 1;
- /*
- * This child was PTRACE_ATTACH'd. We should be seeing it only if
- * we are the attacher. If we are the real parent, this is a race
- * inside ptrace_attach. It is waiting for the tasklist_lock,
- * which we have to switch the parent links, but has already set
- * the flags in p->ptrace.
- */
- return (p->parent != p->real_parent);
-}
-
-static long do_wait(pid_t pid, int options, struct siginfo __user *infop,
- int __user *stat_addr, struct rusage __user *ru)
+static long do_wait(enum pid_type type, struct pid *pid, int options,
+ struct siginfo __user *infop, int __user *stat_addr,
+ struct rusage __user *ru)
{
DECLARE_WAITQUEUE(wait, current);
struct task_struct *tsk;
int flag, retval;
- int allowed, denied;
add_wait_queue(¤t->signal->wait_chldexit,&wait);
repeat:
+ /* If there is nothing that can match our critier just get out */
+ retval = -ECHILD;
+ if ((type < PIDTYPE_MAX) && (!pid || hlist_empty(&pid->tasks[type])))
+ goto end;
+
/*
* We will set this flag if we see any child that might later
* match our criteria, even if we are not able to reap it yet.
*/
- flag = 0;
- allowed = denied = 0;
+ flag = retval = 0;
current->state = TASK_INTERRUPTIBLE;
read_lock(&tasklist_lock);
tsk = current;
do {
struct task_struct *p;
- int ret;
list_for_each_entry(p, &tsk->children, sibling) {
- ret = eligible_child(pid, options, p);
+ int ret = eligible_child(type, pid, options, p);
if (!ret)
continue;
if (unlikely(ret < 0)) {
- denied = ret;
- continue;
- }
- allowed = 1;
-
- if (task_is_stopped_or_traced(p)) {
+ retval = ret;
+ } else if (task_is_stopped_or_traced(p)) {
/*
* It's stopped now, so it might later
* continue, exit, or stop again.
- *
- * When we hit the race with PTRACE_ATTACH, we
- * will not report this child. But the race
- * means it has not yet been moved to our
- * ptrace_children list, so we need to set the
- * flag here to avoid a spurious ECHILD when
- * the race happens with the only child.
*/
flag = 1;
+ if (!(p->ptrace & PT_PTRACED) &&
+ !(options & WUNTRACED))
+ continue;
- if (!my_ptrace_child(p)) {
- if (task_is_traced(p))
- continue;
- if (!(options & WUNTRACED))
- continue;
- }
-
- retval = wait_task_stopped(p, ret == 2,
+ retval = wait_task_stopped(p,
(options & WNOWAIT), infop,
stat_addr, ru);
- if (retval == -EAGAIN)
- goto repeat;
- if (retval != 0) /* He released the lock. */
- goto end;
- } else if (p->exit_state == EXIT_ZOMBIE) {
+ } else if (p->exit_state == EXIT_ZOMBIE &&
+ !delay_group_leader(p)) {
/*
- * Eligible but we cannot release it yet:
+ * We don't reap group leaders with subthreads.
*/
- if (ret == 2)
- goto check_continued;
if (!likely(options & WEXITED))
continue;
retval = wait_task_zombie(p,
(options & WNOWAIT), infop,
stat_addr, ru);
- /* He released the lock. */
- if (retval != 0)
- goto end;
} else if (p->exit_state != EXIT_DEAD) {
-check_continued:
/*
* It's running now, so it might later
* exit, stop, or stop and then continue.
@@ -1616,17 +1517,20 @@
retval = wait_task_continued(p,
(options & WNOWAIT), infop,
stat_addr, ru);
- if (retval != 0) /* He released the lock. */
- goto end;
}
+ if (retval != 0) /* tasklist_lock released */
+ goto end;
}
if (!flag) {
list_for_each_entry(p, &tsk->ptrace_children,
- ptrace_list) {
- if (!eligible_child(pid, options, p))
+ ptrace_list) {
+ flag = eligible_child(type, pid, options, p);
+ if (!flag)
continue;
- flag = 1;
- break;
+ if (likely(flag > 0))
+ break;
+ retval = flag;
+ goto end;
}
}
if (options & __WNOTHREAD)
@@ -1634,10 +1538,9 @@
tsk = next_thread(tsk);
BUG_ON(tsk->signal != current->signal);
} while (tsk != current);
-
read_unlock(&tasklist_lock);
+
if (flag) {
- retval = 0;
if (options & WNOHANG)
goto end;
retval = -ERESTARTSYS;
@@ -1647,14 +1550,12 @@
goto repeat;
}
retval = -ECHILD;
- if (unlikely(denied) && !allowed)
- retval = denied;
end:
current->state = TASK_RUNNING;
remove_wait_queue(¤t->signal->wait_chldexit,&wait);
if (infop) {
if (retval > 0)
- retval = 0;
+ retval = 0;
else {
/*
* For a WNOHANG return, clear out all the fields
@@ -1678,10 +1579,12 @@
return retval;
}
-asmlinkage long sys_waitid(int which, pid_t pid,
+asmlinkage long sys_waitid(int which, pid_t upid,
struct siginfo __user *infop, int options,
struct rusage __user *ru)
{
+ struct pid *pid = NULL;
+ enum pid_type type;
long ret;
if (options & ~(WNOHANG|WNOWAIT|WEXITED|WSTOPPED|WCONTINUED))
@@ -1691,37 +1594,58 @@
switch (which) {
case P_ALL:
- pid = -1;
+ type = PIDTYPE_MAX;
break;
case P_PID:
- if (pid <= 0)
+ type = PIDTYPE_PID;
+ if (upid <= 0)
return -EINVAL;
break;
case P_PGID:
- if (pid <= 0)
+ type = PIDTYPE_PGID;
+ if (upid <= 0)
return -EINVAL;
- pid = -pid;
break;
default:
return -EINVAL;
}
- ret = do_wait(pid, options, infop, NULL, ru);
+ if (type < PIDTYPE_MAX)
+ pid = find_get_pid(upid);
+ ret = do_wait(type, pid, options, infop, NULL, ru);
+ put_pid(pid);
/* avoid REGPARM breakage on x86: */
prevent_tail_call(ret);
return ret;
}
-asmlinkage long sys_wait4(pid_t pid, int __user *stat_addr,
+asmlinkage long sys_wait4(pid_t upid, int __user *stat_addr,
int options, struct rusage __user *ru)
{
+ struct pid *pid = NULL;
+ enum pid_type type;
long ret;
if (options & ~(WNOHANG|WUNTRACED|WCONTINUED|
__WNOTHREAD|__WCLONE|__WALL))
return -EINVAL;
- ret = do_wait(pid, options | WEXITED, NULL, stat_addr, ru);
+
+ if (upid == -1)
+ type = PIDTYPE_MAX;
+ else if (upid < 0) {
+ type = PIDTYPE_PGID;
+ pid = find_get_pid(-upid);
+ } else if (upid == 0) {
+ type = PIDTYPE_PGID;
+ pid = get_pid(task_pgrp(current));
+ } else /* upid > 0 */ {
+ type = PIDTYPE_PID;
+ pid = find_get_pid(upid);
+ }
+
+ ret = do_wait(type, pid, options | WEXITED, NULL, stat_addr, ru);
+ put_pid(pid);
/* avoid REGPARM breakage on x86: */
prevent_tail_call(ret);
diff --git a/kernel/fork.c b/kernel/fork.c
index b2ef8e4..4363a4e 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -390,7 +390,7 @@
* is dropped: either by a lazy thread or by
* mmput. Free the page directory and the mm.
*/
-void fastcall __mmdrop(struct mm_struct *mm)
+void __mmdrop(struct mm_struct *mm)
{
BUG_ON(mm == &init_mm);
mm_free_pgd(mm);
@@ -909,7 +909,6 @@
hrtimer_init(&sig->real_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
sig->it_real_incr.tv64 = 0;
sig->real_timer.function = it_real_fn;
- sig->tsk = tsk;
sig->it_virt_expires = cputime_zero;
sig->it_virt_incr = cputime_zero;
@@ -1338,6 +1337,7 @@
if (clone_flags & CLONE_NEWPID)
p->nsproxy->pid_ns->child_reaper = p;
+ p->signal->leader_pid = pid;
p->signal->tty = current->signal->tty;
set_task_pgrp(p, task_pgrp_nr(current));
set_task_session(p, task_session_nr(current));
@@ -1488,13 +1488,7 @@
if (!IS_ERR(p)) {
struct completion vfork;
- /*
- * this is enough to call pid_nr_ns here, but this if
- * improves optimisation of regular fork()
- */
- nr = (clone_flags & CLONE_NEWPID) ?
- task_pid_nr_ns(p, current->nsproxy->pid_ns) :
- task_pid_vnr(p);
+ nr = task_pid_vnr(p);
if (clone_flags & CLONE_PARENT_SETTID)
put_user(nr, parent_tidptr);
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 44019ce..cc54c62 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -286,7 +286,7 @@
* Note: The caller is expected to handle the ack, clear, mask and
* unmask issues if necessary.
*/
-void fastcall
+void
handle_simple_irq(unsigned int irq, struct irq_desc *desc)
{
struct irqaction *action;
@@ -327,7 +327,7 @@
* it after the associated handler has acknowledged the device, so the
* interrupt line is back to inactive.
*/
-void fastcall
+void
handle_level_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned int cpu = smp_processor_id();
@@ -375,7 +375,7 @@
* for modern forms of interrupt handlers, which handle the flow
* details in hardware, transparently.
*/
-void fastcall
+void
handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned int cpu = smp_processor_id();
@@ -434,7 +434,7 @@
* the handler was running. If all pending interrupts are handled, the
* loop is left.
*/
-void fastcall
+void
handle_edge_irq(unsigned int irq, struct irq_desc *desc)
{
const unsigned int cpu = smp_processor_id();
@@ -505,7 +505,7 @@
*
* Per CPU interrupts on SMP machines without locking requirements
*/
-void fastcall
+void
handle_percpu_irq(unsigned int irq, struct irq_desc *desc)
{
irqreturn_t action_ret;
@@ -589,3 +589,39 @@
set_irq_chip(irq, chip);
__set_irq_handler(irq, handle, 0, name);
}
+
+void __init set_irq_noprobe(unsigned int irq)
+{
+ struct irq_desc *desc;
+ unsigned long flags;
+
+ if (irq >= NR_IRQS) {
+ printk(KERN_ERR "Trying to mark IRQ%d non-probeable\n", irq);
+
+ return;
+ }
+
+ desc = irq_desc + irq;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ desc->status |= IRQ_NOPROBE;
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+
+void __init set_irq_probe(unsigned int irq)
+{
+ struct irq_desc *desc;
+ unsigned long flags;
+
+ if (irq >= NR_IRQS) {
+ printk(KERN_ERR "Trying to mark IRQ%d probeable\n", irq);
+
+ return;
+ }
+
+ desc = irq_desc + irq;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ desc->status &= ~IRQ_NOPROBE;
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index dc335ad..5fa6198 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -25,7 +25,7 @@
*
* Handles spurious and unhandled IRQ's. It also prints a debugmessage.
*/
-void fastcall
+void
handle_bad_irq(unsigned int irq, struct irq_desc *desc)
{
print_irq_desc(irq, desc);
@@ -163,7 +163,7 @@
* This is the original x86 implementation which is used for every
* interrupt type.
*/
-fastcall unsigned int __do_IRQ(unsigned int irq)
+unsigned int __do_IRQ(unsigned int irq)
{
struct irq_desc *desc = irq_desc + irq;
struct irqaction *action;
diff --git a/kernel/itimer.c b/kernel/itimer.c
index 2fab344..ab98274 100644
--- a/kernel/itimer.c
+++ b/kernel/itimer.c
@@ -132,7 +132,7 @@
struct signal_struct *sig =
container_of(timer, struct signal_struct, real_timer);
- send_group_sig_info(SIGALRM, SEND_SIG_PRIV, sig->tsk);
+ kill_pid_info(SIGALRM, SEND_SIG_PRIV, sig->leader_pid);
return HRTIMER_NORESTART;
}
diff --git a/kernel/module.c b/kernel/module.c
index bd60278e..4202da9 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -46,6 +46,7 @@
#include <asm/semaphore.h>
#include <asm/cacheflush.h>
#include <linux/license.h>
+#include <asm/sections.h>
#if 0
#define DEBUGP printk
@@ -290,7 +291,7 @@
}
}
DEBUGP("Failed to find symbol %s\n", name);
- return 0;
+ return -ENOENT;
}
/* Search for module by name: must hold module_mutex. */
@@ -343,9 +344,6 @@
return val;
}
-/* Created by linker magic */
-extern char __per_cpu_start[], __per_cpu_end[];
-
static void *percpu_modalloc(unsigned long size, unsigned long align,
const char *name)
{
@@ -783,7 +781,7 @@
const unsigned long *crc;
preempt_disable();
- if (!__find_symbol(symbol, &owner, &crc, 1))
+ if (IS_ERR_VALUE(__find_symbol(symbol, &owner, &crc, 1)))
BUG();
module_put(owner);
preempt_enable();
@@ -929,7 +927,8 @@
const unsigned long *crc;
struct module *owner;
- if (!__find_symbol("struct_module", &owner, &crc, 1))
+ if (IS_ERR_VALUE(__find_symbol("struct_module",
+ &owner, &crc, 1)))
BUG();
return check_version(sechdrs, versindex, "struct_module", mod,
crc);
@@ -978,12 +977,12 @@
ret = __find_symbol(name, &owner, &crc,
!(mod->taints & TAINT_PROPRIETARY_MODULE));
- if (ret) {
+ if (!IS_ERR_VALUE(ret)) {
/* use_module can fail due to OOM,
or module initialization or unloading */
if (!check_version(sechdrs, versindex, name, mod, crc) ||
!use_module(mod, owner))
- ret = 0;
+ ret = -EINVAL;
}
return ret;
}
@@ -1371,7 +1370,9 @@
preempt_disable();
value = __find_symbol(symbol, &owner, &crc, 1);
- if (value && strong_try_module_get(owner) != 0)
+ if (IS_ERR_VALUE(value))
+ value = 0;
+ else if (strong_try_module_get(owner))
value = 0;
preempt_enable();
@@ -1391,14 +1392,16 @@
const unsigned long *crc;
for (i = 0; i < mod->num_syms; i++)
- if (__find_symbol(mod->syms[i].name, &owner, &crc, 1)) {
+ if (!IS_ERR_VALUE(__find_symbol(mod->syms[i].name,
+ &owner, &crc, 1))) {
name = mod->syms[i].name;
ret = -ENOEXEC;
goto dup;
}
for (i = 0; i < mod->num_gpl_syms; i++)
- if (__find_symbol(mod->gpl_syms[i].name, &owner, &crc, 1)) {
+ if (!IS_ERR_VALUE(__find_symbol(mod->gpl_syms[i].name,
+ &owner, &crc, 1))) {
name = mod->gpl_syms[i].name;
ret = -ENOEXEC;
goto dup;
@@ -1448,7 +1451,7 @@
strtab + sym[i].st_name, mod);
/* Ok if resolved. */
- if (sym[i].st_value != 0)
+ if (!IS_ERR_VALUE(sym[i].st_value))
break;
/* Ok if weak. */
if (ELF_ST_BIND(sym[i].st_info) == STB_WEAK)
@@ -2250,7 +2253,7 @@
/* For kallsyms to ask for address resolution. NULL means not found. Careful
* not to lock to avoid deadlock on oopses, simply disable preemption. */
-char *module_address_lookup(unsigned long addr,
+const char *module_address_lookup(unsigned long addr,
unsigned long *size,
unsigned long *offset,
char **modname,
@@ -2275,7 +2278,7 @@
ret = namebuf;
}
preempt_enable();
- return (char *)ret;
+ return ret;
}
int lookup_module_symbol_name(unsigned long addr, char *symname)
diff --git a/kernel/mutex-debug.c b/kernel/mutex-debug.c
index d17436c..3aaa06c 100644
--- a/kernel/mutex-debug.c
+++ b/kernel/mutex-debug.c
@@ -107,7 +107,7 @@
* use of the mutex is forbidden. The mutex must not be locked when
* this function is called.
*/
-void fastcall mutex_destroy(struct mutex *lock)
+void mutex_destroy(struct mutex *lock)
{
DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock));
lock->magic = NULL;
diff --git a/kernel/mutex.c b/kernel/mutex.c
index d9ec9b6..d046a34 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -58,7 +58,7 @@
* We also put the fastpath first in the kernel image, to make sure the
* branch is predicted by the CPU as default-untaken.
*/
-static void fastcall noinline __sched
+static void noinline __sched
__mutex_lock_slowpath(atomic_t *lock_count);
/***
@@ -82,7 +82,7 @@
*
* This function is similar to (but not equivalent to) down().
*/
-void inline fastcall __sched mutex_lock(struct mutex *lock)
+void inline __sched mutex_lock(struct mutex *lock)
{
might_sleep();
/*
@@ -95,8 +95,7 @@
EXPORT_SYMBOL(mutex_lock);
#endif
-static void fastcall noinline __sched
-__mutex_unlock_slowpath(atomic_t *lock_count);
+static noinline void __sched __mutex_unlock_slowpath(atomic_t *lock_count);
/***
* mutex_unlock - release the mutex
@@ -109,7 +108,7 @@
*
* This function is similar to (but not equivalent to) up().
*/
-void fastcall __sched mutex_unlock(struct mutex *lock)
+void __sched mutex_unlock(struct mutex *lock)
{
/*
* The unlocking fastpath is the 0->1 transition from 'locked'
@@ -234,7 +233,7 @@
/*
* Release the lock, slowpath:
*/
-static fastcall inline void
+static inline void
__mutex_unlock_common_slowpath(atomic_t *lock_count, int nested)
{
struct mutex *lock = container_of(lock_count, struct mutex, count);
@@ -271,7 +270,7 @@
/*
* Release the lock, slowpath:
*/
-static fastcall noinline void
+static noinline void
__mutex_unlock_slowpath(atomic_t *lock_count)
{
__mutex_unlock_common_slowpath(lock_count, 1);
@@ -282,10 +281,10 @@
* Here come the less common (and hence less performance-critical) APIs:
* mutex_lock_interruptible() and mutex_trylock().
*/
-static int fastcall noinline __sched
+static noinline int __sched
__mutex_lock_killable_slowpath(atomic_t *lock_count);
-static noinline int fastcall __sched
+static noinline int __sched
__mutex_lock_interruptible_slowpath(atomic_t *lock_count);
/***
@@ -299,7 +298,7 @@
*
* This function is similar to (but not equivalent to) down_interruptible().
*/
-int fastcall __sched mutex_lock_interruptible(struct mutex *lock)
+int __sched mutex_lock_interruptible(struct mutex *lock)
{
might_sleep();
return __mutex_fastpath_lock_retval
@@ -308,7 +307,7 @@
EXPORT_SYMBOL(mutex_lock_interruptible);
-int fastcall __sched mutex_lock_killable(struct mutex *lock)
+int __sched mutex_lock_killable(struct mutex *lock)
{
might_sleep();
return __mutex_fastpath_lock_retval
@@ -316,7 +315,7 @@
}
EXPORT_SYMBOL(mutex_lock_killable);
-static void fastcall noinline __sched
+static noinline void __sched
__mutex_lock_slowpath(atomic_t *lock_count)
{
struct mutex *lock = container_of(lock_count, struct mutex, count);
@@ -324,7 +323,7 @@
__mutex_lock_common(lock, TASK_UNINTERRUPTIBLE, 0, _RET_IP_);
}
-static int fastcall noinline __sched
+static noinline int __sched
__mutex_lock_killable_slowpath(atomic_t *lock_count)
{
struct mutex *lock = container_of(lock_count, struct mutex, count);
@@ -332,7 +331,7 @@
return __mutex_lock_common(lock, TASK_KILLABLE, 0, _RET_IP_);
}
-static noinline int fastcall __sched
+static noinline int __sched
__mutex_lock_interruptible_slowpath(atomic_t *lock_count)
{
struct mutex *lock = container_of(lock_count, struct mutex, count);
@@ -381,7 +380,7 @@
* This function must not be used in interrupt context. The
* mutex must be released by the same task that acquired it.
*/
-int fastcall __sched mutex_trylock(struct mutex *lock)
+int __sched mutex_trylock(struct mutex *lock)
{
return __mutex_fastpath_trylock(&lock->count,
__mutex_trylock_slowpath);
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index 79f871b..f5d332c 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -21,6 +21,7 @@
#include <linux/utsname.h>
#include <linux/pid_namespace.h>
#include <net/net_namespace.h>
+#include <linux/ipc_namespace.h>
static struct kmem_cache *nsproxy_cachep;
diff --git a/kernel/params.c b/kernel/params.c
index e28c706..afc46a2 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -180,12 +180,12 @@
#define STANDARD_PARAM_DEF(name, type, format, tmptype, strtolfn) \
int param_set_##name(const char *val, struct kernel_param *kp) \
{ \
- char *endp; \
tmptype l; \
+ int ret; \
\
if (!val) return -EINVAL; \
- l = strtolfn(val, &endp, 0); \
- if (endp == val || ((type)l != l)) \
+ ret = strtolfn(val, 0, &l); \
+ if (ret == -EINVAL || ((type)l != l)) \
return -EINVAL; \
*((type *)kp->arg) = l; \
return 0; \
@@ -195,13 +195,13 @@
return sprintf(buffer, format, *((type *)kp->arg)); \
}
-STANDARD_PARAM_DEF(byte, unsigned char, "%c", unsigned long, simple_strtoul);
-STANDARD_PARAM_DEF(short, short, "%hi", long, simple_strtol);
-STANDARD_PARAM_DEF(ushort, unsigned short, "%hu", unsigned long, simple_strtoul);
-STANDARD_PARAM_DEF(int, int, "%i", long, simple_strtol);
-STANDARD_PARAM_DEF(uint, unsigned int, "%u", unsigned long, simple_strtoul);
-STANDARD_PARAM_DEF(long, long, "%li", long, simple_strtol);
-STANDARD_PARAM_DEF(ulong, unsigned long, "%lu", unsigned long, simple_strtoul);
+STANDARD_PARAM_DEF(byte, unsigned char, "%c", unsigned long, strict_strtoul);
+STANDARD_PARAM_DEF(short, short, "%hi", long, strict_strtol);
+STANDARD_PARAM_DEF(ushort, unsigned short, "%hu", unsigned long, strict_strtoul);
+STANDARD_PARAM_DEF(int, int, "%i", long, strict_strtol);
+STANDARD_PARAM_DEF(uint, unsigned int, "%u", unsigned long, strict_strtoul);
+STANDARD_PARAM_DEF(long, long, "%li", long, strict_strtol);
+STANDARD_PARAM_DEF(ulong, unsigned long, "%lu", unsigned long, strict_strtoul);
int param_set_charp(const char *val, struct kernel_param *kp)
{
diff --git a/kernel/pid.c b/kernel/pid.c
index 3b30bcc..4776915 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -41,7 +41,6 @@
static struct hlist_head *pid_hash;
static int pidhash_shift;
struct pid init_struct_pid = INIT_STRUCT_PID;
-static struct kmem_cache *pid_ns_cachep;
int pid_max = PID_MAX_DEFAULT;
@@ -112,7 +111,7 @@
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(pidmap_lock);
-static fastcall void free_pidmap(struct pid_namespace *pid_ns, int pid)
+static void free_pidmap(struct pid_namespace *pid_ns, int pid)
{
struct pidmap *map = pid_ns->pidmap + pid / BITS_PER_PAGE;
int offset = pid & BITS_PER_PAGE_MASK;
@@ -181,7 +180,7 @@
return -1;
}
-static int next_pidmap(struct pid_namespace *pid_ns, int last)
+int next_pidmap(struct pid_namespace *pid_ns, int last)
{
int offset;
struct pidmap *map, *end;
@@ -199,7 +198,7 @@
return -1;
}
-fastcall void put_pid(struct pid *pid)
+void put_pid(struct pid *pid)
{
struct pid_namespace *ns;
@@ -221,7 +220,7 @@
put_pid(pid);
}
-fastcall void free_pid(struct pid *pid)
+void free_pid(struct pid *pid)
{
/* We can be called with write_lock_irq(&tasklist_lock) held */
int i;
@@ -287,7 +286,7 @@
goto out;
}
-struct pid * fastcall find_pid_ns(int nr, struct pid_namespace *ns)
+struct pid *find_pid_ns(int nr, struct pid_namespace *ns)
{
struct hlist_node *elem;
struct upid *pnr;
@@ -317,7 +316,7 @@
/*
* attach_pid() must be called with the tasklist_lock write-held.
*/
-int fastcall attach_pid(struct task_struct *task, enum pid_type type,
+int attach_pid(struct task_struct *task, enum pid_type type,
struct pid *pid)
{
struct pid_link *link;
@@ -329,7 +328,7 @@
return 0;
}
-void fastcall detach_pid(struct task_struct *task, enum pid_type type)
+void detach_pid(struct task_struct *task, enum pid_type type)
{
struct pid_link *link;
struct pid *pid;
@@ -349,7 +348,7 @@
}
/* transfer_pid is an optimization of attach_pid(new), detach_pid(old) */
-void fastcall transfer_pid(struct task_struct *old, struct task_struct *new,
+void transfer_pid(struct task_struct *old, struct task_struct *new,
enum pid_type type)
{
new->pids[type].pid = old->pids[type].pid;
@@ -357,7 +356,7 @@
old->pids[type].pid = NULL;
}
-struct task_struct * fastcall pid_task(struct pid *pid, enum pid_type type)
+struct task_struct *pid_task(struct pid *pid, enum pid_type type)
{
struct task_struct *result = NULL;
if (pid) {
@@ -409,7 +408,7 @@
return pid;
}
-struct task_struct *fastcall get_pid_task(struct pid *pid, enum pid_type type)
+struct task_struct *get_pid_task(struct pid *pid, enum pid_type type)
{
struct task_struct *result;
rcu_read_lock();
@@ -444,6 +443,12 @@
return nr;
}
+pid_t pid_vnr(struct pid *pid)
+{
+ return pid_nr_ns(pid, current->nsproxy->pid_ns);
+}
+EXPORT_SYMBOL_GPL(pid_vnr);
+
pid_t task_pid_nr_ns(struct task_struct *tsk, struct pid_namespace *ns)
{
return pid_nr_ns(task_pid(tsk), ns);
@@ -488,180 +493,6 @@
}
EXPORT_SYMBOL_GPL(find_get_pid);
-struct pid_cache {
- int nr_ids;
- char name[16];
- struct kmem_cache *cachep;
- struct list_head list;
-};
-
-static LIST_HEAD(pid_caches_lh);
-static DEFINE_MUTEX(pid_caches_mutex);
-
-/*
- * creates the kmem cache to allocate pids from.
- * @nr_ids: the number of numerical ids this pid will have to carry
- */
-
-static struct kmem_cache *create_pid_cachep(int nr_ids)
-{
- struct pid_cache *pcache;
- struct kmem_cache *cachep;
-
- mutex_lock(&pid_caches_mutex);
- list_for_each_entry (pcache, &pid_caches_lh, list)
- if (pcache->nr_ids == nr_ids)
- goto out;
-
- pcache = kmalloc(sizeof(struct pid_cache), GFP_KERNEL);
- if (pcache == NULL)
- goto err_alloc;
-
- snprintf(pcache->name, sizeof(pcache->name), "pid_%d", nr_ids);
- cachep = kmem_cache_create(pcache->name,
- sizeof(struct pid) + (nr_ids - 1) * sizeof(struct upid),
- 0, SLAB_HWCACHE_ALIGN, NULL);
- if (cachep == NULL)
- goto err_cachep;
-
- pcache->nr_ids = nr_ids;
- pcache->cachep = cachep;
- list_add(&pcache->list, &pid_caches_lh);
-out:
- mutex_unlock(&pid_caches_mutex);
- return pcache->cachep;
-
-err_cachep:
- kfree(pcache);
-err_alloc:
- mutex_unlock(&pid_caches_mutex);
- return NULL;
-}
-
-#ifdef CONFIG_PID_NS
-static struct pid_namespace *create_pid_namespace(int level)
-{
- struct pid_namespace *ns;
- int i;
-
- ns = kmem_cache_alloc(pid_ns_cachep, GFP_KERNEL);
- if (ns == NULL)
- goto out;
-
- ns->pidmap[0].page = kzalloc(PAGE_SIZE, GFP_KERNEL);
- if (!ns->pidmap[0].page)
- goto out_free;
-
- ns->pid_cachep = create_pid_cachep(level + 1);
- if (ns->pid_cachep == NULL)
- goto out_free_map;
-
- kref_init(&ns->kref);
- ns->last_pid = 0;
- ns->child_reaper = NULL;
- ns->level = level;
-
- set_bit(0, ns->pidmap[0].page);
- atomic_set(&ns->pidmap[0].nr_free, BITS_PER_PAGE - 1);
-
- for (i = 1; i < PIDMAP_ENTRIES; i++) {
- ns->pidmap[i].page = 0;
- atomic_set(&ns->pidmap[i].nr_free, BITS_PER_PAGE);
- }
-
- return ns;
-
-out_free_map:
- kfree(ns->pidmap[0].page);
-out_free:
- kmem_cache_free(pid_ns_cachep, ns);
-out:
- return ERR_PTR(-ENOMEM);
-}
-
-static void destroy_pid_namespace(struct pid_namespace *ns)
-{
- int i;
-
- for (i = 0; i < PIDMAP_ENTRIES; i++)
- kfree(ns->pidmap[i].page);
- kmem_cache_free(pid_ns_cachep, ns);
-}
-
-struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *old_ns)
-{
- struct pid_namespace *new_ns;
-
- BUG_ON(!old_ns);
- new_ns = get_pid_ns(old_ns);
- if (!(flags & CLONE_NEWPID))
- goto out;
-
- new_ns = ERR_PTR(-EINVAL);
- if (flags & CLONE_THREAD)
- goto out_put;
-
- new_ns = create_pid_namespace(old_ns->level + 1);
- if (!IS_ERR(new_ns))
- new_ns->parent = get_pid_ns(old_ns);
-
-out_put:
- put_pid_ns(old_ns);
-out:
- return new_ns;
-}
-
-void free_pid_ns(struct kref *kref)
-{
- struct pid_namespace *ns, *parent;
-
- ns = container_of(kref, struct pid_namespace, kref);
-
- parent = ns->parent;
- destroy_pid_namespace(ns);
-
- if (parent != NULL)
- put_pid_ns(parent);
-}
-#endif /* CONFIG_PID_NS */
-
-void zap_pid_ns_processes(struct pid_namespace *pid_ns)
-{
- int nr;
- int rc;
-
- /*
- * The last thread in the cgroup-init thread group is terminating.
- * Find remaining pid_ts in the namespace, signal and wait for them
- * to exit.
- *
- * Note: This signals each threads in the namespace - even those that
- * belong to the same thread group, To avoid this, we would have
- * to walk the entire tasklist looking a processes in this
- * namespace, but that could be unnecessarily expensive if the
- * pid namespace has just a few processes. Or we need to
- * maintain a tasklist for each pid namespace.
- *
- */
- read_lock(&tasklist_lock);
- nr = next_pidmap(pid_ns, 1);
- while (nr > 0) {
- kill_proc_info(SIGKILL, SEND_SIG_PRIV, nr);
- nr = next_pidmap(pid_ns, nr);
- }
- read_unlock(&tasklist_lock);
-
- do {
- clear_thread_flag(TIF_SIGPENDING);
- rc = sys_wait4(-1, NULL, __WALL, NULL);
- } while (rc != -ECHILD);
-
-
- /* Child reaper for the pid namespace is going away */
- pid_ns->child_reaper = NULL;
- return;
-}
-
/*
* The pid hash table is scaled according to the amount of memory in the
* machine. From a minimum of 16 slots up to 4096 slots at one gigabyte or
@@ -694,9 +525,6 @@
set_bit(0, init_pid_ns.pidmap[0].page);
atomic_dec(&init_pid_ns.pidmap[0].nr_free);
- init_pid_ns.pid_cachep = create_pid_cachep(1);
- if (init_pid_ns.pid_cachep == NULL)
- panic("Can't create pid_1 cachep\n");
-
- pid_ns_cachep = KMEM_CACHE(pid_namespace, SLAB_PANIC);
+ init_pid_ns.pid_cachep = KMEM_CACHE(pid,
+ SLAB_HWCACHE_ALIGN | SLAB_PANIC);
}
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
new file mode 100644
index 0000000..6d792b6
--- /dev/null
+++ b/kernel/pid_namespace.c
@@ -0,0 +1,197 @@
+/*
+ * Pid namespaces
+ *
+ * Authors:
+ * (C) 2007 Pavel Emelyanov <xemul@openvz.org>, OpenVZ, SWsoft Inc.
+ * (C) 2007 Sukadev Bhattiprolu <sukadev@us.ibm.com>, IBM
+ * Many thanks to Oleg Nesterov for comments and help
+ *
+ */
+
+#include <linux/pid.h>
+#include <linux/pid_namespace.h>
+#include <linux/syscalls.h>
+#include <linux/err.h>
+
+#define BITS_PER_PAGE (PAGE_SIZE*8)
+
+struct pid_cache {
+ int nr_ids;
+ char name[16];
+ struct kmem_cache *cachep;
+ struct list_head list;
+};
+
+static LIST_HEAD(pid_caches_lh);
+static DEFINE_MUTEX(pid_caches_mutex);
+static struct kmem_cache *pid_ns_cachep;
+
+/*
+ * creates the kmem cache to allocate pids from.
+ * @nr_ids: the number of numerical ids this pid will have to carry
+ */
+
+static struct kmem_cache *create_pid_cachep(int nr_ids)
+{
+ struct pid_cache *pcache;
+ struct kmem_cache *cachep;
+
+ mutex_lock(&pid_caches_mutex);
+ list_for_each_entry(pcache, &pid_caches_lh, list)
+ if (pcache->nr_ids == nr_ids)
+ goto out;
+
+ pcache = kmalloc(sizeof(struct pid_cache), GFP_KERNEL);
+ if (pcache == NULL)
+ goto err_alloc;
+
+ snprintf(pcache->name, sizeof(pcache->name), "pid_%d", nr_ids);
+ cachep = kmem_cache_create(pcache->name,
+ sizeof(struct pid) + (nr_ids - 1) * sizeof(struct upid),
+ 0, SLAB_HWCACHE_ALIGN, NULL);
+ if (cachep == NULL)
+ goto err_cachep;
+
+ pcache->nr_ids = nr_ids;
+ pcache->cachep = cachep;
+ list_add(&pcache->list, &pid_caches_lh);
+out:
+ mutex_unlock(&pid_caches_mutex);
+ return pcache->cachep;
+
+err_cachep:
+ kfree(pcache);
+err_alloc:
+ mutex_unlock(&pid_caches_mutex);
+ return NULL;
+}
+
+static struct pid_namespace *create_pid_namespace(int level)
+{
+ struct pid_namespace *ns;
+ int i;
+
+ ns = kmem_cache_alloc(pid_ns_cachep, GFP_KERNEL);
+ if (ns == NULL)
+ goto out;
+
+ ns->pidmap[0].page = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!ns->pidmap[0].page)
+ goto out_free;
+
+ ns->pid_cachep = create_pid_cachep(level + 1);
+ if (ns->pid_cachep == NULL)
+ goto out_free_map;
+
+ kref_init(&ns->kref);
+ ns->last_pid = 0;
+ ns->child_reaper = NULL;
+ ns->level = level;
+
+ set_bit(0, ns->pidmap[0].page);
+ atomic_set(&ns->pidmap[0].nr_free, BITS_PER_PAGE - 1);
+
+ for (i = 1; i < PIDMAP_ENTRIES; i++) {
+ ns->pidmap[i].page = 0;
+ atomic_set(&ns->pidmap[i].nr_free, BITS_PER_PAGE);
+ }
+
+ return ns;
+
+out_free_map:
+ kfree(ns->pidmap[0].page);
+out_free:
+ kmem_cache_free(pid_ns_cachep, ns);
+out:
+ return ERR_PTR(-ENOMEM);
+}
+
+static void destroy_pid_namespace(struct pid_namespace *ns)
+{
+ int i;
+
+ for (i = 0; i < PIDMAP_ENTRIES; i++)
+ kfree(ns->pidmap[i].page);
+ kmem_cache_free(pid_ns_cachep, ns);
+}
+
+struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *old_ns)
+{
+ struct pid_namespace *new_ns;
+
+ BUG_ON(!old_ns);
+ new_ns = get_pid_ns(old_ns);
+ if (!(flags & CLONE_NEWPID))
+ goto out;
+
+ new_ns = ERR_PTR(-EINVAL);
+ if (flags & CLONE_THREAD)
+ goto out_put;
+
+ new_ns = create_pid_namespace(old_ns->level + 1);
+ if (!IS_ERR(new_ns))
+ new_ns->parent = get_pid_ns(old_ns);
+
+out_put:
+ put_pid_ns(old_ns);
+out:
+ return new_ns;
+}
+
+void free_pid_ns(struct kref *kref)
+{
+ struct pid_namespace *ns, *parent;
+
+ ns = container_of(kref, struct pid_namespace, kref);
+
+ parent = ns->parent;
+ destroy_pid_namespace(ns);
+
+ if (parent != NULL)
+ put_pid_ns(parent);
+}
+
+void zap_pid_ns_processes(struct pid_namespace *pid_ns)
+{
+ int nr;
+ int rc;
+
+ /*
+ * The last thread in the cgroup-init thread group is terminating.
+ * Find remaining pid_ts in the namespace, signal and wait for them
+ * to exit.
+ *
+ * Note: This signals each threads in the namespace - even those that
+ * belong to the same thread group, To avoid this, we would have
+ * to walk the entire tasklist looking a processes in this
+ * namespace, but that could be unnecessarily expensive if the
+ * pid namespace has just a few processes. Or we need to
+ * maintain a tasklist for each pid namespace.
+ *
+ */
+ read_lock(&tasklist_lock);
+ nr = next_pidmap(pid_ns, 1);
+ while (nr > 0) {
+ kill_proc_info(SIGKILL, SEND_SIG_PRIV, nr);
+ nr = next_pidmap(pid_ns, nr);
+ }
+ read_unlock(&tasklist_lock);
+
+ do {
+ clear_thread_flag(TIF_SIGPENDING);
+ rc = sys_wait4(-1, NULL, __WALL, NULL);
+ } while (rc != -ECHILD);
+
+
+ /* Child reaper for the pid namespace is going away */
+ pid_ns->child_reaper = NULL;
+ return;
+}
+
+static __init int pid_namespaces_init(void)
+{
+ pid_ns_cachep = KMEM_CACHE(pid_namespace, SLAB_PANIC);
+ return 0;
+}
+
+__initcall(pid_namespaces_init);
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 0b7c82ac..2eae91f 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -20,7 +20,7 @@
return 0;
read_lock(&tasklist_lock);
- p = find_task_by_pid(pid);
+ p = find_task_by_vpid(pid);
if (!p || !(CPUCLOCK_PERTHREAD(which_clock) ?
same_thread_group(p, current) : thread_group_leader(p))) {
error = -EINVAL;
@@ -305,7 +305,7 @@
*/
struct task_struct *p;
rcu_read_lock();
- p = find_task_by_pid(pid);
+ p = find_task_by_vpid(pid);
if (p) {
if (CPUCLOCK_PERTHREAD(which_clock)) {
if (same_thread_group(p, current)) {
@@ -354,7 +354,7 @@
if (pid == 0) {
p = current;
} else {
- p = find_task_by_pid(pid);
+ p = find_task_by_vpid(pid);
if (p && !same_thread_group(p, current))
p = NULL;
}
@@ -362,7 +362,7 @@
if (pid == 0) {
p = current->group_leader;
} else {
- p = find_task_by_pid(pid);
+ p = find_task_by_vpid(pid);
if (p && !thread_group_leader(p))
p = NULL;
}
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 122d5c7..ce26896 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -404,7 +404,7 @@
struct task_struct *rtn = current->group_leader;
if ((event->sigev_notify & SIGEV_THREAD_ID ) &&
- (!(rtn = find_task_by_pid(event->sigev_notify_thread_id)) ||
+ (!(rtn = find_task_by_vpid(event->sigev_notify_thread_id)) ||
!same_thread_group(rtn, current) ||
(event->sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_SIGNAL))
return NULL;
diff --git a/kernel/printk.c b/kernel/printk.c
index 4a09062..bee3610 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -32,7 +32,6 @@
#include <linux/security.h>
#include <linux/bootmem.h>
#include <linux/syscalls.h>
-#include <linux/jiffies.h>
#include <asm/uaccess.h>
@@ -567,19 +566,6 @@
#endif
module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR);
-static int __init printk_time_setup(char *str)
-{
- if (*str)
- return 0;
- printk_time = 1;
- printk(KERN_NOTICE "The 'time' option is deprecated and "
- "is scheduled for removal in early 2008\n");
- printk(KERN_NOTICE "Use 'printk.time=<value>' instead\n");
- return 1;
-}
-
-__setup("time", printk_time_setup);
-
/* Check if we have any console registered that can be called early in boot. */
static int have_callable_console(void)
{
@@ -1265,6 +1251,7 @@
return;
}
+#if defined CONFIG_PRINTK
/*
* printk rate limiting, lifted from the networking subsystem.
*
@@ -1334,3 +1321,4 @@
return false;
}
EXPORT_SYMBOL(printk_timed_ratelimit);
+#endif
diff --git a/kernel/profile.c b/kernel/profile.c
index e64c2da..3b7a1b0 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -20,7 +20,6 @@
#include <linux/mm.h>
#include <linux/cpumask.h>
#include <linux/cpu.h>
-#include <linux/profile.h>
#include <linux/highmem.h>
#include <linux/mutex.h>
#include <asm/sections.h>
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 628b03a..fdb34e8 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -99,10 +99,12 @@
* be changed by us so it's not changing right after this.
*/
read_lock(&tasklist_lock);
- if ((child->ptrace & PT_PTRACED) && child->parent == current &&
- (!(child->ptrace & PT_ATTACHED) || child->real_parent != current)
- && child->signal != NULL) {
+ if ((child->ptrace & PT_PTRACED) && child->parent == current) {
ret = 0;
+ /*
+ * child->sighand can't be NULL, release_task()
+ * does ptrace_unlink() before __exit_signal().
+ */
spin_lock_irq(&child->sighand->siglock);
if (task_is_stopped(child))
child->state = TASK_TRACED;
@@ -200,8 +202,7 @@
goto bad;
/* Go */
- task->ptrace |= PT_PTRACED | ((task->real_parent != current)
- ? PT_ATTACHED : 0);
+ task->ptrace |= PT_PTRACED;
if (capable(CAP_SYS_PTRACE))
task->ptrace |= PT_PTRACE_CAP;
diff --git a/kernel/rtmutex-debug.c b/kernel/rtmutex-debug.c
index 56d73cb..5fcb4fe 100644
--- a/kernel/rtmutex-debug.c
+++ b/kernel/rtmutex-debug.c
@@ -130,7 +130,7 @@
task = rt_mutex_owner(act_waiter->lock);
if (task && task != current) {
- act_waiter->deadlock_task_pid = task->pid;
+ act_waiter->deadlock_task_pid = get_pid(task_pid(task));
act_waiter->deadlock_lock = lock;
}
}
@@ -142,9 +142,12 @@
if (!waiter->deadlock_lock || !rt_trace_on)
return;
- task = find_task_by_pid(waiter->deadlock_task_pid);
- if (!task)
+ rcu_read_lock();
+ task = pid_task(waiter->deadlock_task_pid, PIDTYPE_PID);
+ if (!task) {
+ rcu_read_unlock();
return;
+ }
TRACE_OFF_NOLOCK();
@@ -173,6 +176,7 @@
current->comm, task_pid_nr(current));
dump_stack();
debug_show_all_locks();
+ rcu_read_unlock();
printk("[ turning off deadlock detection."
"Please report this trace. ]\n\n");
@@ -203,10 +207,12 @@
memset(waiter, 0x11, sizeof(*waiter));
plist_node_init(&waiter->list_entry, MAX_PRIO);
plist_node_init(&waiter->pi_list_entry, MAX_PRIO);
+ waiter->deadlock_task_pid = NULL;
}
void debug_rt_mutex_free_waiter(struct rt_mutex_waiter *waiter)
{
+ put_pid(waiter->deadlock_task_pid);
TRACE_WARN_ON(!plist_node_empty(&waiter->list_entry));
TRACE_WARN_ON(!plist_node_empty(&waiter->pi_list_entry));
TRACE_WARN_ON(waiter->task);
diff --git a/kernel/rtmutex_common.h b/kernel/rtmutex_common.h
index 2d3b835..e124bf5 100644
--- a/kernel/rtmutex_common.h
+++ b/kernel/rtmutex_common.h
@@ -51,7 +51,7 @@
struct rt_mutex *lock;
#ifdef CONFIG_DEBUG_RT_MUTEXES
unsigned long ip;
- pid_t deadlock_task_pid;
+ struct pid *deadlock_task_pid;
struct rt_mutex *deadlock_lock;
#endif
};
diff --git a/kernel/sched.c b/kernel/sched.c
index 9474b23..3eedd52 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1893,13 +1893,13 @@
return success;
}
-int fastcall wake_up_process(struct task_struct *p)
+int wake_up_process(struct task_struct *p)
{
return try_to_wake_up(p, TASK_ALL, 0);
}
EXPORT_SYMBOL(wake_up_process);
-int fastcall wake_up_state(struct task_struct *p, unsigned int state)
+int wake_up_state(struct task_struct *p, unsigned int state)
{
return try_to_wake_up(p, state, 0);
}
@@ -1986,7 +1986,7 @@
* that must be done for every newly created context, then puts the task
* on the runqueue and wakes it.
*/
-void fastcall wake_up_new_task(struct task_struct *p, unsigned long clone_flags)
+void wake_up_new_task(struct task_struct *p, unsigned long clone_flags)
{
unsigned long flags;
struct rq *rq;
@@ -3753,7 +3753,7 @@
#if defined(CONFIG_PREEMPT) && defined(CONFIG_DEBUG_PREEMPT)
-void fastcall add_preempt_count(int val)
+void add_preempt_count(int val)
{
/*
* Underflow?
@@ -3769,7 +3769,7 @@
}
EXPORT_SYMBOL(add_preempt_count);
-void fastcall sub_preempt_count(int val)
+void sub_preempt_count(int val)
{
/*
* Underflow?
@@ -4067,7 +4067,7 @@
* @nr_exclusive: how many wake-one or wake-many threads to wake up
* @key: is directly passed to the wakeup function
*/
-void fastcall __wake_up(wait_queue_head_t *q, unsigned int mode,
+void __wake_up(wait_queue_head_t *q, unsigned int mode,
int nr_exclusive, void *key)
{
unsigned long flags;
@@ -4081,7 +4081,7 @@
/*
* Same as __wake_up but called with the spinlock in wait_queue_head_t held.
*/
-void fastcall __wake_up_locked(wait_queue_head_t *q, unsigned int mode)
+void __wake_up_locked(wait_queue_head_t *q, unsigned int mode)
{
__wake_up_common(q, mode, 1, 0, NULL);
}
@@ -4099,7 +4099,7 @@
*
* On UP it can prevent extra preemption.
*/
-void fastcall
+void
__wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr_exclusive)
{
unsigned long flags;
diff --git a/kernel/signal.c b/kernel/signal.c
index 5d30ff5..2c1f08d 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1018,7 +1018,7 @@
}
/*
- * kill_pgrp_info() sends a signal to a process group: this is what the tty
+ * __kill_pgrp_info() sends a signal to a process group: this is what the tty
* control characters do (^C, ^Z etc)
*/
@@ -1037,30 +1037,28 @@
return success ? 0 : retval;
}
-int kill_pgrp_info(int sig, struct siginfo *info, struct pid *pgrp)
-{
- int retval;
-
- read_lock(&tasklist_lock);
- retval = __kill_pgrp_info(sig, info, pgrp);
- read_unlock(&tasklist_lock);
-
- return retval;
-}
-
int kill_pid_info(int sig, struct siginfo *info, struct pid *pid)
{
- int error;
+ int error = -ESRCH;
struct task_struct *p;
rcu_read_lock();
if (unlikely(sig_needs_tasklist(sig)))
read_lock(&tasklist_lock);
+retry:
p = pid_task(pid, PIDTYPE_PID);
- error = -ESRCH;
- if (p)
+ if (p) {
error = group_send_sig_info(sig, info, p);
+ if (unlikely(error == -ESRCH))
+ /*
+ * The task was unhashed in between, try again.
+ * If it is dead, pid_task() will return NULL,
+ * if we race with de_thread() it will find the
+ * new leader.
+ */
+ goto retry;
+ }
if (unlikely(sig_needs_tasklist(sig)))
read_unlock(&tasklist_lock);
@@ -1125,14 +1123,22 @@
static int kill_something_info(int sig, struct siginfo *info, int pid)
{
int ret;
- rcu_read_lock();
- if (!pid) {
- ret = kill_pgrp_info(sig, info, task_pgrp(current));
- } else if (pid == -1) {
+
+ if (pid > 0) {
+ rcu_read_lock();
+ ret = kill_pid_info(sig, info, find_vpid(pid));
+ rcu_read_unlock();
+ return ret;
+ }
+
+ read_lock(&tasklist_lock);
+ if (pid != -1) {
+ ret = __kill_pgrp_info(sig, info,
+ pid ? find_vpid(-pid) : task_pgrp(current));
+ } else {
int retval = 0, count = 0;
struct task_struct * p;
- read_lock(&tasklist_lock);
for_each_process(p) {
if (p->pid > 1 && !same_thread_group(p, current)) {
int err = group_send_sig_info(sig, info, p);
@@ -1141,14 +1147,10 @@
retval = err;
}
}
- read_unlock(&tasklist_lock);
ret = count ? retval : -ESRCH;
- } else if (pid < 0) {
- ret = kill_pgrp_info(sig, info, find_vpid(-pid));
- } else {
- ret = kill_pid_info(sig, info, find_vpid(pid));
}
- rcu_read_unlock();
+ read_unlock(&tasklist_lock);
+
return ret;
}
@@ -1196,20 +1198,6 @@
return send_sig_info(sig, __si_special(priv), p);
}
-/*
- * This is the entry point for "process-wide" signals.
- * They will go to an appropriate thread in the thread group.
- */
-int
-send_group_sig_info(int sig, struct siginfo *info, struct task_struct *p)
-{
- int ret;
- read_lock(&tasklist_lock);
- ret = group_send_sig_info(sig, info, p);
- read_unlock(&tasklist_lock);
- return ret;
-}
-
void
force_sig(int sig, struct task_struct *p)
{
@@ -1237,7 +1225,13 @@
int kill_pgrp(struct pid *pid, int sig, int priv)
{
- return kill_pgrp_info(sig, __si_special(priv), pid);
+ int ret;
+
+ read_lock(&tasklist_lock);
+ ret = __kill_pgrp_info(sig, __si_special(priv), pid);
+ read_unlock(&tasklist_lock);
+
+ return ret;
}
EXPORT_SYMBOL(kill_pgrp);
@@ -1556,11 +1550,6 @@
{
if (!likely(current->ptrace & PT_PTRACED))
return 0;
-
- if (unlikely(current->parent == current->real_parent &&
- (current->ptrace & PT_ATTACHED)))
- return 0;
-
/*
* Are we in the middle of do_coredump?
* If so and our tracer is also part of the coredump stopping
@@ -1596,10 +1585,10 @@
* That makes it a way to test a stopped process for
* being ptrace-stopped vs being job-control-stopped.
*
- * If we actually decide not to stop at all because the tracer is gone,
- * we leave nostop_code in current->exit_code.
+ * If we actually decide not to stop at all because the tracer
+ * is gone, we keep current->exit_code unless clear_code.
*/
-static void ptrace_stop(int exit_code, int nostop_code, siginfo_t *info)
+static void ptrace_stop(int exit_code, int clear_code, siginfo_t *info)
{
int killed = 0;
@@ -1643,11 +1632,12 @@
} else {
/*
* By the time we got the lock, our tracer went away.
- * Don't stop here.
+ * Don't drop the lock yet, another tracer may come.
*/
+ __set_current_state(TASK_RUNNING);
+ if (clear_code)
+ current->exit_code = 0;
read_unlock(&tasklist_lock);
- set_current_state(TASK_RUNNING);
- current->exit_code = nostop_code;
}
/*
@@ -1680,7 +1670,7 @@
/* Let the debugger run. */
spin_lock_irq(¤t->sighand->siglock);
- ptrace_stop(exit_code, 0, &info);
+ ptrace_stop(exit_code, 1, &info);
spin_unlock_irq(¤t->sighand->siglock);
}
@@ -1743,7 +1733,7 @@
* stop is always done with the siglock held,
* so this check has no races.
*/
- if (!t->exit_state &&
+ if (!(t->flags & PF_EXITING) &&
!task_is_stopped_or_traced(t)) {
stop_count++;
signal_wake_up(t, 0);
@@ -1787,7 +1777,7 @@
ptrace_signal_deliver(regs, cookie);
/* Let the debugger run. */
- ptrace_stop(signr, signr, info);
+ ptrace_stop(signr, 0, info);
/* We're back. Did the debugger cancel the sig? */
signr = current->exit_code;
@@ -1904,6 +1894,48 @@
return signr;
}
+void exit_signals(struct task_struct *tsk)
+{
+ int group_stop = 0;
+ struct task_struct *t;
+
+ if (thread_group_empty(tsk) || signal_group_exit(tsk->signal)) {
+ tsk->flags |= PF_EXITING;
+ return;
+ }
+
+ spin_lock_irq(&tsk->sighand->siglock);
+ /*
+ * From now this task is not visible for group-wide signals,
+ * see wants_signal(), do_signal_stop().
+ */
+ tsk->flags |= PF_EXITING;
+ if (!signal_pending(tsk))
+ goto out;
+
+ /* It could be that __group_complete_signal() choose us to
+ * notify about group-wide signal. Another thread should be
+ * woken now to take the signal since we will not.
+ */
+ for (t = tsk; (t = next_thread(t)) != tsk; )
+ if (!signal_pending(t) && !(t->flags & PF_EXITING))
+ recalc_sigpending_and_wake(t);
+
+ if (unlikely(tsk->signal->group_stop_count) &&
+ !--tsk->signal->group_stop_count) {
+ tsk->signal->flags = SIGNAL_STOP_STOPPED;
+ group_stop = 1;
+ }
+out:
+ spin_unlock_irq(&tsk->sighand->siglock);
+
+ if (unlikely(group_stop)) {
+ read_lock(&tasklist_lock);
+ do_notify_parent_cldstop(tsk, CLD_STOPPED);
+ read_unlock(&tasklist_lock);
+ }
+}
+
EXPORT_SYMBOL(recalc_sigpending);
EXPORT_SYMBOL_GPL(dequeue_signal);
EXPORT_SYMBOL(flush_signals);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index d7837d4..5b3aea5 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -320,7 +320,7 @@
/*
* This function must run with irqs disabled!
*/
-inline fastcall void raise_softirq_irqoff(unsigned int nr)
+inline void raise_softirq_irqoff(unsigned int nr)
{
__raise_softirq_irqoff(nr);
@@ -337,7 +337,7 @@
wakeup_softirqd();
}
-void fastcall raise_softirq(unsigned int nr)
+void raise_softirq(unsigned int nr)
{
unsigned long flags;
@@ -363,7 +363,7 @@
static DEFINE_PER_CPU(struct tasklet_head, tasklet_vec) = { NULL };
static DEFINE_PER_CPU(struct tasklet_head, tasklet_hi_vec) = { NULL };
-void fastcall __tasklet_schedule(struct tasklet_struct *t)
+void __tasklet_schedule(struct tasklet_struct *t)
{
unsigned long flags;
@@ -376,7 +376,7 @@
EXPORT_SYMBOL(__tasklet_schedule);
-void fastcall __tasklet_hi_schedule(struct tasklet_struct *t)
+void __tasklet_hi_schedule(struct tasklet_struct *t)
{
unsigned long flags;
diff --git a/kernel/sys.c b/kernel/sys.c
index e3c08d4..a626116 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -916,8 +916,8 @@
{
struct task_struct *p;
struct task_struct *group_leader = current->group_leader;
- int err = -EINVAL;
- struct pid_namespace *ns;
+ struct pid *pgrp;
+ int err;
if (!pid)
pid = task_pid_vnr(group_leader);
@@ -929,12 +929,10 @@
/* From this point forward we keep holding onto the tasklist lock
* so that our parent does not change from under us. -DaveM
*/
- ns = current->nsproxy->pid_ns;
-
write_lock_irq(&tasklist_lock);
err = -ESRCH;
- p = find_task_by_pid_ns(pid, ns);
+ p = find_task_by_vpid(pid);
if (!p)
goto out;
@@ -942,7 +940,7 @@
if (!thread_group_leader(p))
goto out;
- if (p->real_parent->tgid == group_leader->tgid) {
+ if (same_thread_group(p->real_parent, group_leader)) {
err = -EPERM;
if (task_session(p) != task_session(group_leader))
goto out;
@@ -959,10 +957,12 @@
if (p->signal->leader)
goto out;
+ pgrp = task_pid(p);
if (pgid != pid) {
struct task_struct *g;
- g = find_task_by_pid_type_ns(PIDTYPE_PGID, pgid, ns);
+ pgrp = find_vpid(pgid);
+ g = pid_task(pgrp, PIDTYPE_PGID);
if (!g || task_session(g) != task_session(group_leader))
goto out;
}
@@ -971,13 +971,10 @@
if (err)
goto out;
- if (task_pgrp_nr_ns(p, ns) != pgid) {
- struct pid *pid;
-
+ if (task_pgrp(p) != pgrp) {
detach_pid(p, PIDTYPE_PGID);
- pid = find_vpid(pgid);
- attach_pid(p, PIDTYPE_PGID, pid);
- set_task_pgrp(p, pid_nr(pid));
+ attach_pid(p, PIDTYPE_PGID, pgrp);
+ set_task_pgrp(p, pid_nr(pgrp));
}
err = 0;
@@ -994,17 +991,14 @@
else {
int retval;
struct task_struct *p;
- struct pid_namespace *ns;
-
- ns = current->nsproxy->pid_ns;
read_lock(&tasklist_lock);
- p = find_task_by_pid_ns(pid, ns);
+ p = find_task_by_vpid(pid);
retval = -ESRCH;
if (p) {
retval = security_task_getpgid(p);
if (!retval)
- retval = task_pgrp_nr_ns(p, ns);
+ retval = task_pgrp_vnr(p);
}
read_unlock(&tasklist_lock);
return retval;
@@ -1028,19 +1022,16 @@
else {
int retval;
struct task_struct *p;
- struct pid_namespace *ns;
- ns = current->nsproxy->pid_ns;
-
- read_lock(&tasklist_lock);
- p = find_task_by_pid_ns(pid, ns);
+ rcu_read_lock();
+ p = find_task_by_vpid(pid);
retval = -ESRCH;
if (p) {
retval = security_task_getsid(p);
if (!retval)
- retval = task_session_nr_ns(p, ns);
+ retval = task_session_vnr(p);
}
- read_unlock(&tasklist_lock);
+ rcu_read_unlock();
return retval;
}
}
@@ -1048,35 +1039,29 @@
asmlinkage long sys_setsid(void)
{
struct task_struct *group_leader = current->group_leader;
- pid_t session;
+ struct pid *sid = task_pid(group_leader);
+ pid_t session = pid_vnr(sid);
int err = -EPERM;
write_lock_irq(&tasklist_lock);
-
/* Fail if I am already a session leader */
if (group_leader->signal->leader)
goto out;
- session = group_leader->pid;
/* Fail if a process group id already exists that equals the
* proposed session id.
- *
- * Don't check if session id == 1 because kernel threads use this
- * session id and so the check will always fail and make it so
- * init cannot successfully call setsid.
*/
- if (session > 1 && find_task_by_pid_type_ns(PIDTYPE_PGID,
- session, &init_pid_ns))
+ if (pid_task(sid, PIDTYPE_PGID))
goto out;
group_leader->signal->leader = 1;
- __set_special_pids(session, session);
+ __set_special_pids(sid);
spin_lock(&group_leader->sighand->siglock);
group_leader->signal->tty = NULL;
spin_unlock(&group_leader->sighand->siglock);
- err = task_pgrp_vnr(group_leader);
+ err = session;
out:
write_unlock_irq(&tasklist_lock);
return err;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 8c98d81..d41ef6b 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -37,7 +37,6 @@
#include <linux/highuid.h>
#include <linux/writeback.h>
#include <linux/hugetlb.h>
-#include <linux/security.h>
#include <linux/initrd.h>
#include <linux/times.h>
#include <linux/limits.h>
@@ -74,8 +73,6 @@
extern char core_pattern[];
extern int pid_max;
extern int min_free_kbytes;
-extern int printk_ratelimit_jiffies;
-extern int printk_ratelimit_burst;
extern int pid_max_min, pid_max_max;
extern int sysctl_drop_caches;
extern int percpu_pagelist_fraction;
@@ -491,14 +488,6 @@
.mode = 0644,
.proc_handler = &proc_dointvec,
},
- {
- .ctl_name = KERN_PRINTK,
- .procname = "printk",
- .data = &console_loglevel,
- .maxlen = 4*sizeof(int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
#ifdef CONFIG_KMOD
{
.ctl_name = KERN_MODPROBE,
@@ -645,6 +634,15 @@
.mode = 0644,
.proc_handler = &proc_dointvec,
},
+#if defined CONFIG_PRINTK
+ {
+ .ctl_name = KERN_PRINTK,
+ .procname = "printk",
+ .data = &console_loglevel,
+ .maxlen = 4*sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
{
.ctl_name = KERN_PRINTK_RATELIMIT,
.procname = "printk_ratelimit",
@@ -662,6 +660,7 @@
.mode = 0644,
.proc_handler = &proc_dointvec,
},
+#endif
{
.ctl_name = KERN_NGROUPS_MAX,
.procname = "ngroups_max",
@@ -982,7 +981,7 @@
.data = &nr_overcommit_huge_pages,
.maxlen = sizeof(nr_overcommit_huge_pages),
.mode = 0644,
- .proc_handler = &proc_doulongvec_minmax,
+ .proc_handler = &hugetlb_overcommit_handler,
},
#endif
{
@@ -2488,7 +2487,7 @@
pid_t tmp;
int r;
- tmp = pid_nr_ns(cad_pid, current->nsproxy->pid_ns);
+ tmp = pid_vnr(cad_pid);
r = __do_proc_dointvec(&tmp, table, write, filp, buffer,
lenp, ppos, NULL, NULL);
diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c
index 006365b..c09350d 100644
--- a/kernel/sysctl_check.c
+++ b/kernel/sysctl_check.c
@@ -8,10 +8,10 @@
struct trans_ctl_table {
int ctl_name;
const char *procname;
- struct trans_ctl_table *child;
+ const struct trans_ctl_table *child;
};
-static struct trans_ctl_table trans_random_table[] = {
+static const struct trans_ctl_table trans_random_table[] = {
{ RANDOM_POOLSIZE, "poolsize" },
{ RANDOM_ENTROPY_COUNT, "entropy_avail" },
{ RANDOM_READ_THRESH, "read_wakeup_threshold" },
@@ -21,13 +21,13 @@
{}
};
-static struct trans_ctl_table trans_pty_table[] = {
+static const struct trans_ctl_table trans_pty_table[] = {
{ PTY_MAX, "max" },
{ PTY_NR, "nr" },
{}
};
-static struct trans_ctl_table trans_kern_table[] = {
+static const struct trans_ctl_table trans_kern_table[] = {
{ KERN_OSTYPE, "ostype" },
{ KERN_OSRELEASE, "osrelease" },
/* KERN_OSREV not used */
@@ -107,7 +107,7 @@
{}
};
-static struct trans_ctl_table trans_vm_table[] = {
+static const struct trans_ctl_table trans_vm_table[] = {
{ VM_OVERCOMMIT_MEMORY, "overcommit_memory" },
{ VM_PAGE_CLUSTER, "page-cluster" },
{ VM_DIRTY_BACKGROUND, "dirty_background_ratio" },
@@ -139,7 +139,7 @@
{}
};
-static struct trans_ctl_table trans_net_core_table[] = {
+static const struct trans_ctl_table trans_net_core_table[] = {
{ NET_CORE_WMEM_MAX, "wmem_max" },
{ NET_CORE_RMEM_MAX, "rmem_max" },
{ NET_CORE_WMEM_DEFAULT, "wmem_default" },
@@ -165,14 +165,14 @@
{},
};
-static struct trans_ctl_table trans_net_unix_table[] = {
+static const struct trans_ctl_table trans_net_unix_table[] = {
/* NET_UNIX_DESTROY_DELAY unused */
/* NET_UNIX_DELETE_DELAY unused */
{ NET_UNIX_MAX_DGRAM_QLEN, "max_dgram_qlen" },
{}
};
-static struct trans_ctl_table trans_net_ipv4_route_table[] = {
+static const struct trans_ctl_table trans_net_ipv4_route_table[] = {
{ NET_IPV4_ROUTE_FLUSH, "flush" },
{ NET_IPV4_ROUTE_MIN_DELAY, "min_delay" },
{ NET_IPV4_ROUTE_MAX_DELAY, "max_delay" },
@@ -195,7 +195,7 @@
{}
};
-static struct trans_ctl_table trans_net_ipv4_conf_vars_table[] = {
+static const struct trans_ctl_table trans_net_ipv4_conf_vars_table[] = {
{ NET_IPV4_CONF_FORWARDING, "forwarding" },
{ NET_IPV4_CONF_MC_FORWARDING, "mc_forwarding" },
@@ -222,14 +222,14 @@
{}
};
-static struct trans_ctl_table trans_net_ipv4_conf_table[] = {
+static const struct trans_ctl_table trans_net_ipv4_conf_table[] = {
{ NET_PROTO_CONF_ALL, "all", trans_net_ipv4_conf_vars_table },
{ NET_PROTO_CONF_DEFAULT, "default", trans_net_ipv4_conf_vars_table },
{ 0, NULL, trans_net_ipv4_conf_vars_table },
{}
};
-static struct trans_ctl_table trans_net_neigh_vars_table[] = {
+static const struct trans_ctl_table trans_net_neigh_vars_table[] = {
{ NET_NEIGH_MCAST_SOLICIT, "mcast_solicit" },
{ NET_NEIGH_UCAST_SOLICIT, "ucast_solicit" },
{ NET_NEIGH_APP_SOLICIT, "app_solicit" },
@@ -251,13 +251,13 @@
{}
};
-static struct trans_ctl_table trans_net_neigh_table[] = {
+static const struct trans_ctl_table trans_net_neigh_table[] = {
{ NET_PROTO_CONF_DEFAULT, "default", trans_net_neigh_vars_table },
{ 0, NULL, trans_net_neigh_vars_table },
{}
};
-static struct trans_ctl_table trans_net_ipv4_netfilter_table[] = {
+static const struct trans_ctl_table trans_net_ipv4_netfilter_table[] = {
{ NET_IPV4_NF_CONNTRACK_MAX, "ip_conntrack_max" },
{ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT, "ip_conntrack_tcp_timeout_syn_sent" },
@@ -294,7 +294,7 @@
{}
};
-static struct trans_ctl_table trans_net_ipv4_table[] = {
+static const struct trans_ctl_table trans_net_ipv4_table[] = {
{ NET_IPV4_FORWARD, "ip_forward" },
{ NET_IPV4_DYNADDR, "ip_dynaddr" },
@@ -393,13 +393,13 @@
{}
};
-static struct trans_ctl_table trans_net_ipx_table[] = {
+static const struct trans_ctl_table trans_net_ipx_table[] = {
{ NET_IPX_PPROP_BROADCASTING, "ipx_pprop_broadcasting" },
/* NET_IPX_FORWARDING unused */
{}
};
-static struct trans_ctl_table trans_net_atalk_table[] = {
+static const struct trans_ctl_table trans_net_atalk_table[] = {
{ NET_ATALK_AARP_EXPIRY_TIME, "aarp-expiry-time" },
{ NET_ATALK_AARP_TICK_TIME, "aarp-tick-time" },
{ NET_ATALK_AARP_RETRANSMIT_LIMIT, "aarp-retransmit-limit" },
@@ -407,7 +407,7 @@
{},
};
-static struct trans_ctl_table trans_net_netrom_table[] = {
+static const struct trans_ctl_table trans_net_netrom_table[] = {
{ NET_NETROM_DEFAULT_PATH_QUALITY, "default_path_quality" },
{ NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER, "obsolescence_count_initialiser" },
{ NET_NETROM_NETWORK_TTL_INITIALISER, "network_ttl_initialiser" },
@@ -423,7 +423,7 @@
{}
};
-static struct trans_ctl_table trans_net_ax25_param_table[] = {
+static const struct trans_ctl_table trans_net_ax25_param_table[] = {
{ NET_AX25_IP_DEFAULT_MODE, "ip_default_mode" },
{ NET_AX25_DEFAULT_MODE, "ax25_default_mode" },
{ NET_AX25_BACKOFF_TYPE, "backoff_type" },
@@ -441,12 +441,12 @@
{}
};
-static struct trans_ctl_table trans_net_ax25_table[] = {
+static const struct trans_ctl_table trans_net_ax25_table[] = {
{ 0, NULL, trans_net_ax25_param_table },
{}
};
-static struct trans_ctl_table trans_net_bridge_table[] = {
+static const struct trans_ctl_table trans_net_bridge_table[] = {
{ NET_BRIDGE_NF_CALL_ARPTABLES, "bridge-nf-call-arptables" },
{ NET_BRIDGE_NF_CALL_IPTABLES, "bridge-nf-call-iptables" },
{ NET_BRIDGE_NF_CALL_IP6TABLES, "bridge-nf-call-ip6tables" },
@@ -455,7 +455,7 @@
{}
};
-static struct trans_ctl_table trans_net_rose_table[] = {
+static const struct trans_ctl_table trans_net_rose_table[] = {
{ NET_ROSE_RESTART_REQUEST_TIMEOUT, "restart_request_timeout" },
{ NET_ROSE_CALL_REQUEST_TIMEOUT, "call_request_timeout" },
{ NET_ROSE_RESET_REQUEST_TIMEOUT, "reset_request_timeout" },
@@ -469,7 +469,7 @@
{}
};
-static struct trans_ctl_table trans_net_ipv6_conf_var_table[] = {
+static const struct trans_ctl_table trans_net_ipv6_conf_var_table[] = {
{ NET_IPV6_FORWARDING, "forwarding" },
{ NET_IPV6_HOP_LIMIT, "hop_limit" },
{ NET_IPV6_MTU, "mtu" },
@@ -497,14 +497,14 @@
{}
};
-static struct trans_ctl_table trans_net_ipv6_conf_table[] = {
+static const struct trans_ctl_table trans_net_ipv6_conf_table[] = {
{ NET_PROTO_CONF_ALL, "all", trans_net_ipv6_conf_var_table },
{ NET_PROTO_CONF_DEFAULT, "default", trans_net_ipv6_conf_var_table },
{ 0, NULL, trans_net_ipv6_conf_var_table },
{}
};
-static struct trans_ctl_table trans_net_ipv6_route_table[] = {
+static const struct trans_ctl_table trans_net_ipv6_route_table[] = {
{ NET_IPV6_ROUTE_FLUSH, "flush" },
{ NET_IPV6_ROUTE_GC_THRESH, "gc_thresh" },
{ NET_IPV6_ROUTE_MAX_SIZE, "max_size" },
@@ -518,12 +518,12 @@
{}
};
-static struct trans_ctl_table trans_net_ipv6_icmp_table[] = {
+static const struct trans_ctl_table trans_net_ipv6_icmp_table[] = {
{ NET_IPV6_ICMP_RATELIMIT, "ratelimit" },
{}
};
-static struct trans_ctl_table trans_net_ipv6_table[] = {
+static const struct trans_ctl_table trans_net_ipv6_table[] = {
{ NET_IPV6_CONF, "conf", trans_net_ipv6_conf_table },
{ NET_IPV6_NEIGH, "neigh", trans_net_neigh_table },
{ NET_IPV6_ROUTE, "route", trans_net_ipv6_route_table },
@@ -538,7 +538,7 @@
{}
};
-static struct trans_ctl_table trans_net_x25_table[] = {
+static const struct trans_ctl_table trans_net_x25_table[] = {
{ NET_X25_RESTART_REQUEST_TIMEOUT, "restart_request_timeout" },
{ NET_X25_CALL_REQUEST_TIMEOUT, "call_request_timeout" },
{ NET_X25_RESET_REQUEST_TIMEOUT, "reset_request_timeout" },
@@ -548,13 +548,13 @@
{}
};
-static struct trans_ctl_table trans_net_tr_table[] = {
+static const struct trans_ctl_table trans_net_tr_table[] = {
{ NET_TR_RIF_TIMEOUT, "rif_timeout" },
{}
};
-static struct trans_ctl_table trans_net_decnet_conf_vars[] = {
+static const struct trans_ctl_table trans_net_decnet_conf_vars[] = {
{ NET_DECNET_CONF_DEV_FORWARDING, "forwarding" },
{ NET_DECNET_CONF_DEV_PRIORITY, "priority" },
{ NET_DECNET_CONF_DEV_T2, "t2" },
@@ -562,12 +562,12 @@
{}
};
-static struct trans_ctl_table trans_net_decnet_conf[] = {
+static const struct trans_ctl_table trans_net_decnet_conf[] = {
{ 0, NULL, trans_net_decnet_conf_vars },
{}
};
-static struct trans_ctl_table trans_net_decnet_table[] = {
+static const struct trans_ctl_table trans_net_decnet_table[] = {
{ NET_DECNET_CONF, "conf", trans_net_decnet_conf },
{ NET_DECNET_NODE_ADDRESS, "node_address" },
{ NET_DECNET_NODE_NAME, "node_name" },
@@ -585,7 +585,7 @@
{}
};
-static struct trans_ctl_table trans_net_sctp_table[] = {
+static const struct trans_ctl_table trans_net_sctp_table[] = {
{ NET_SCTP_RTO_INITIAL, "rto_initial" },
{ NET_SCTP_RTO_MIN, "rto_min" },
{ NET_SCTP_RTO_MAX, "rto_max" },
@@ -606,7 +606,7 @@
{}
};
-static struct trans_ctl_table trans_net_llc_llc2_timeout_table[] = {
+static const struct trans_ctl_table trans_net_llc_llc2_timeout_table[] = {
{ NET_LLC2_ACK_TIMEOUT, "ack" },
{ NET_LLC2_P_TIMEOUT, "p" },
{ NET_LLC2_REJ_TIMEOUT, "rej" },
@@ -614,23 +614,23 @@
{}
};
-static struct trans_ctl_table trans_net_llc_station_table[] = {
+static const struct trans_ctl_table trans_net_llc_station_table[] = {
{ NET_LLC_STATION_ACK_TIMEOUT, "ack_timeout" },
{}
};
-static struct trans_ctl_table trans_net_llc_llc2_table[] = {
+static const struct trans_ctl_table trans_net_llc_llc2_table[] = {
{ NET_LLC2, "timeout", trans_net_llc_llc2_timeout_table },
{}
};
-static struct trans_ctl_table trans_net_llc_table[] = {
+static const struct trans_ctl_table trans_net_llc_table[] = {
{ NET_LLC2, "llc2", trans_net_llc_llc2_table },
{ NET_LLC_STATION, "station", trans_net_llc_station_table },
{}
};
-static struct trans_ctl_table trans_net_netfilter_table[] = {
+static const struct trans_ctl_table trans_net_netfilter_table[] = {
{ NET_NF_CONNTRACK_MAX, "nf_conntrack_max" },
{ NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT, "nf_conntrack_tcp_timeout_syn_sent" },
{ NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV, "nf_conntrack_tcp_timeout_syn_recv" },
@@ -667,12 +667,12 @@
{}
};
-static struct trans_ctl_table trans_net_dccp_table[] = {
+static const struct trans_ctl_table trans_net_dccp_table[] = {
{ NET_DCCP_DEFAULT, "default" },
{}
};
-static struct trans_ctl_table trans_net_irda_table[] = {
+static const struct trans_ctl_table trans_net_irda_table[] = {
{ NET_IRDA_DISCOVERY, "discovery" },
{ NET_IRDA_DEVNAME, "devname" },
{ NET_IRDA_DEBUG, "debug" },
@@ -690,7 +690,7 @@
{}
};
-static struct trans_ctl_table trans_net_table[] = {
+static const struct trans_ctl_table trans_net_table[] = {
{ NET_CORE, "core", trans_net_core_table },
/* NET_ETHER not used */
/* NET_802 not used */
@@ -716,7 +716,7 @@
{}
};
-static struct trans_ctl_table trans_fs_quota_table[] = {
+static const struct trans_ctl_table trans_fs_quota_table[] = {
{ FS_DQ_LOOKUPS, "lookups" },
{ FS_DQ_DROPS, "drops" },
{ FS_DQ_READS, "reads" },
@@ -729,7 +729,7 @@
{}
};
-static struct trans_ctl_table trans_fs_xfs_table[] = {
+static const struct trans_ctl_table trans_fs_xfs_table[] = {
{ XFS_RESTRICT_CHOWN, "restrict_chown" },
{ XFS_SGID_INHERIT, "irix_sgid_inherit" },
{ XFS_SYMLINK_MODE, "irix_symlink_mode" },
@@ -750,24 +750,24 @@
{}
};
-static struct trans_ctl_table trans_fs_ocfs2_nm_table[] = {
+static const struct trans_ctl_table trans_fs_ocfs2_nm_table[] = {
{ 1, "hb_ctl_path" },
{}
};
-static struct trans_ctl_table trans_fs_ocfs2_table[] = {
+static const struct trans_ctl_table trans_fs_ocfs2_table[] = {
{ 1, "nm", trans_fs_ocfs2_nm_table },
{}
};
-static struct trans_ctl_table trans_inotify_table[] = {
+static const struct trans_ctl_table trans_inotify_table[] = {
{ INOTIFY_MAX_USER_INSTANCES, "max_user_instances" },
{ INOTIFY_MAX_USER_WATCHES, "max_user_watches" },
{ INOTIFY_MAX_QUEUED_EVENTS, "max_queued_events" },
{}
};
-static struct trans_ctl_table trans_fs_table[] = {
+static const struct trans_ctl_table trans_fs_table[] = {
{ FS_NRINODE, "inode-nr" },
{ FS_STATINODE, "inode-state" },
/* FS_MAXINODE unused */
@@ -793,11 +793,11 @@
{}
};
-static struct trans_ctl_table trans_debug_table[] = {
+static const struct trans_ctl_table trans_debug_table[] = {
{}
};
-static struct trans_ctl_table trans_cdrom_table[] = {
+static const struct trans_ctl_table trans_cdrom_table[] = {
{ DEV_CDROM_INFO, "info" },
{ DEV_CDROM_AUTOCLOSE, "autoclose" },
{ DEV_CDROM_AUTOEJECT, "autoeject" },
@@ -807,12 +807,12 @@
{}
};
-static struct trans_ctl_table trans_ipmi_table[] = {
+static const struct trans_ctl_table trans_ipmi_table[] = {
{ DEV_IPMI_POWEROFF_POWERCYCLE, "poweroff_powercycle" },
{}
};
-static struct trans_ctl_table trans_mac_hid_files[] = {
+static const struct trans_ctl_table trans_mac_hid_files[] = {
/* DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES unused */
/* DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES unused */
{ DEV_MAC_HID_MOUSE_BUTTON_EMULATION, "mouse_button_emulation" },
@@ -822,35 +822,35 @@
{}
};
-static struct trans_ctl_table trans_raid_table[] = {
+static const struct trans_ctl_table trans_raid_table[] = {
{ DEV_RAID_SPEED_LIMIT_MIN, "speed_limit_min" },
{ DEV_RAID_SPEED_LIMIT_MAX, "speed_limit_max" },
{}
};
-static struct trans_ctl_table trans_scsi_table[] = {
+static const struct trans_ctl_table trans_scsi_table[] = {
{ DEV_SCSI_LOGGING_LEVEL, "logging_level" },
{}
};
-static struct trans_ctl_table trans_parport_default_table[] = {
+static const struct trans_ctl_table trans_parport_default_table[] = {
{ DEV_PARPORT_DEFAULT_TIMESLICE, "timeslice" },
{ DEV_PARPORT_DEFAULT_SPINTIME, "spintime" },
{}
};
-static struct trans_ctl_table trans_parport_device_table[] = {
+static const struct trans_ctl_table trans_parport_device_table[] = {
{ DEV_PARPORT_DEVICE_TIMESLICE, "timeslice" },
{}
};
-static struct trans_ctl_table trans_parport_devices_table[] = {
+static const struct trans_ctl_table trans_parport_devices_table[] = {
{ DEV_PARPORT_DEVICES_ACTIVE, "active" },
{ 0, NULL, trans_parport_device_table },
{}
};
-static struct trans_ctl_table trans_parport_parport_table[] = {
+static const struct trans_ctl_table trans_parport_parport_table[] = {
{ DEV_PARPORT_SPINTIME, "spintime" },
{ DEV_PARPORT_BASE_ADDR, "base-addr" },
{ DEV_PARPORT_IRQ, "irq" },
@@ -864,13 +864,13 @@
{ DEV_PARPORT_AUTOPROBE + 4, "autoprobe3" },
{}
};
-static struct trans_ctl_table trans_parport_table[] = {
+static const struct trans_ctl_table trans_parport_table[] = {
{ DEV_PARPORT_DEFAULT, "default", trans_parport_default_table },
{ 0, NULL, trans_parport_parport_table },
{}
};
-static struct trans_ctl_table trans_dev_table[] = {
+static const struct trans_ctl_table trans_dev_table[] = {
{ DEV_CDROM, "cdrom", trans_cdrom_table },
/* DEV_HWMON unused */
{ DEV_PARPORT, "parport", trans_parport_table },
@@ -881,19 +881,19 @@
{}
};
-static struct trans_ctl_table trans_bus_isa_table[] = {
+static const struct trans_ctl_table trans_bus_isa_table[] = {
{ BUS_ISA_MEM_BASE, "membase" },
{ BUS_ISA_PORT_BASE, "portbase" },
{ BUS_ISA_PORT_SHIFT, "portshift" },
{}
};
-static struct trans_ctl_table trans_bus_table[] = {
+static const struct trans_ctl_table trans_bus_table[] = {
{ CTL_BUS_ISA, "isa", trans_bus_isa_table },
{}
};
-static struct trans_ctl_table trans_arlan_conf_table0[] = {
+static const struct trans_ctl_table trans_arlan_conf_table0[] = {
{ 1, "spreadingCode" },
{ 2, "channelNumber" },
{ 3, "scramblingDisable" },
@@ -964,7 +964,7 @@
{}
};
-static struct trans_ctl_table trans_arlan_conf_table1[] = {
+static const struct trans_ctl_table trans_arlan_conf_table1[] = {
{ 1, "spreadingCode" },
{ 2, "channelNumber" },
{ 3, "scramblingDisable" },
@@ -1035,7 +1035,7 @@
{}
};
-static struct trans_ctl_table trans_arlan_conf_table2[] = {
+static const struct trans_ctl_table trans_arlan_conf_table2[] = {
{ 1, "spreadingCode" },
{ 2, "channelNumber" },
{ 3, "scramblingDisable" },
@@ -1106,7 +1106,7 @@
{}
};
-static struct trans_ctl_table trans_arlan_conf_table3[] = {
+static const struct trans_ctl_table trans_arlan_conf_table3[] = {
{ 1, "spreadingCode" },
{ 2, "channelNumber" },
{ 3, "scramblingDisable" },
@@ -1177,7 +1177,7 @@
{}
};
-static struct trans_ctl_table trans_arlan_table[] = {
+static const struct trans_ctl_table trans_arlan_table[] = {
{ 1, "arlan0", trans_arlan_conf_table0 },
{ 2, "arlan1", trans_arlan_conf_table1 },
{ 3, "arlan2", trans_arlan_conf_table2 },
@@ -1185,13 +1185,13 @@
{}
};
-static struct trans_ctl_table trans_s390dbf_table[] = {
+static const struct trans_ctl_table trans_s390dbf_table[] = {
{ 5678 /* CTL_S390DBF_STOPPABLE */, "debug_stoppable" },
{ 5679 /* CTL_S390DBF_ACTIVE */, "debug_active" },
{}
};
-static struct trans_ctl_table trans_sunrpc_table[] = {
+static const struct trans_ctl_table trans_sunrpc_table[] = {
{ CTL_RPCDEBUG, "rpc_debug" },
{ CTL_NFSDEBUG, "nfs_debug" },
{ CTL_NFSDDEBUG, "nfsd_debug" },
@@ -1203,7 +1203,7 @@
{}
};
-static struct trans_ctl_table trans_pm_table[] = {
+static const struct trans_ctl_table trans_pm_table[] = {
{ 1 /* CTL_PM_SUSPEND */, "suspend" },
{ 2 /* CTL_PM_CMODE */, "cmode" },
{ 3 /* CTL_PM_P0 */, "p0" },
@@ -1211,13 +1211,13 @@
{}
};
-static struct trans_ctl_table trans_frv_table[] = {
+static const struct trans_ctl_table trans_frv_table[] = {
{ 1, "cache-mode" },
{ 2, "pin-cxnr" },
{}
};
-static struct trans_ctl_table trans_root_table[] = {
+static const struct trans_ctl_table trans_root_table[] = {
{ CTL_KERN, "kernel", trans_kern_table },
{ CTL_VM, "vm", trans_vm_table },
{ CTL_NET, "net", trans_net_table },
@@ -1261,15 +1261,14 @@
return table;
}
-static struct trans_ctl_table *sysctl_binary_lookup(struct ctl_table *table)
+static const struct trans_ctl_table *sysctl_binary_lookup(struct ctl_table *table)
{
struct ctl_table *test;
- struct trans_ctl_table *ref;
- int depth, cur_depth;
+ const struct trans_ctl_table *ref;
+ int cur_depth;
- depth = sysctl_depth(table);
+ cur_depth = sysctl_depth(table);
- cur_depth = depth;
ref = trans_root_table;
repeat:
test = sysctl_parent(table, cur_depth);
@@ -1437,7 +1436,7 @@
static void sysctl_check_bin_path(struct ctl_table *table, const char **fail)
{
- struct trans_ctl_table *ref;
+ const struct trans_ctl_table *ref;
ref = sysctl_binary_lookup(table);
if (table->ctl_name && !ref)
diff --git a/kernel/time.c b/kernel/time.c
index 33af3e5..a5ec013b6 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -39,6 +39,8 @@
#include <asm/uaccess.h>
#include <asm/unistd.h>
+#include "timeconst.h"
+
/*
* The timezone where the local system is located. Used as a default by some
* programs who obtain this value by using gettimeofday.
@@ -93,7 +95,8 @@
#endif /* __ARCH_WANT_SYS_TIME */
-asmlinkage long sys_gettimeofday(struct timeval __user *tv, struct timezone __user *tz)
+asmlinkage long sys_gettimeofday(struct timeval __user *tv,
+ struct timezone __user *tz)
{
if (likely(tv != NULL)) {
struct timeval ktv;
@@ -118,7 +121,7 @@
* hard to make the program warp the clock precisely n hours) or
* compile in the timezone information into the kernel. Bad, bad....
*
- * - TYT, 1992-01-01
+ * - TYT, 1992-01-01
*
* The best thing to do is to keep the CMOS clock in universal time (UTC)
* as real UNIX machines always do it. This avoids all headaches about
@@ -240,7 +243,11 @@
#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC);
#else
- return (j * MSEC_PER_SEC) / HZ;
+# if BITS_PER_LONG == 32
+ return ((u64)HZ_TO_MSEC_MUL32 * j) >> HZ_TO_MSEC_SHR32;
+# else
+ return (j * HZ_TO_MSEC_NUM) / HZ_TO_MSEC_DEN;
+# endif
#endif
}
EXPORT_SYMBOL(jiffies_to_msecs);
@@ -252,7 +259,11 @@
#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
return (j + (HZ / USEC_PER_SEC) - 1)/(HZ / USEC_PER_SEC);
#else
- return (j * USEC_PER_SEC) / HZ;
+# if BITS_PER_LONG == 32
+ return ((u64)HZ_TO_USEC_MUL32 * j) >> HZ_TO_USEC_SHR32;
+# else
+ return (j * HZ_TO_USEC_NUM) / HZ_TO_USEC_DEN;
+# endif
#endif
}
EXPORT_SYMBOL(jiffies_to_usecs);
@@ -267,7 +278,7 @@
*
* This function should be only used for timestamps returned by
* current_kernel_time() or CURRENT_TIME, not with do_gettimeofday() because
- * it doesn't handle the better resolution of the later.
+ * it doesn't handle the better resolution of the latter.
*/
struct timespec timespec_trunc(struct timespec t, unsigned gran)
{
@@ -315,7 +326,7 @@
* This algorithm was first published by Gauss (I think).
*
* WARNING: this function will overflow on 2106-02-07 06:28:16 on
- * machines were long is 32-bit! (However, as time_t is signed, we
+ * machines where long is 32-bit! (However, as time_t is signed, we
* will already get problems at other places on 2038-01-19 03:14:08)
*/
unsigned long
@@ -352,7 +363,7 @@
* normalize to the timespec storage format
*
* Note: The tv_nsec part is always in the range of
- * 0 <= tv_nsec < NSEC_PER_SEC
+ * 0 <= tv_nsec < NSEC_PER_SEC
* For negative values only the tv_sec field is negative !
*/
void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec)
@@ -453,12 +464,13 @@
/*
* Generic case - multiply, round and divide. But first
* check that if we are doing a net multiplication, that
- * we wouldnt overflow:
+ * we wouldn't overflow:
*/
if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
return MAX_JIFFY_OFFSET;
- return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC;
+ return ((u64)MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32)
+ >> MSEC_TO_HZ_SHR32;
#endif
}
EXPORT_SYMBOL(msecs_to_jiffies);
@@ -472,7 +484,8 @@
#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
return u * (HZ / USEC_PER_SEC);
#else
- return (u * HZ + USEC_PER_SEC - 1) / USEC_PER_SEC;
+ return ((u64)USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)
+ >> USEC_TO_HZ_SHR32;
#endif
}
EXPORT_SYMBOL(usecs_to_jiffies);
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 3e59fce..3d1e3e1 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -133,7 +133,7 @@
}
/*
- * Called after a notify add to make devices availble which were
+ * Called after a notify add to make devices available which were
* released from the notifier call.
*/
static void clockevents_notify_released(void)
@@ -218,6 +218,8 @@
*/
void clockevents_notify(unsigned long reason, void *arg)
{
+ struct list_head *node, *tmp;
+
spin_lock(&clockevents_lock);
clockevents_do_notify(reason, arg);
@@ -227,13 +229,8 @@
* Unregister the clock event devices which were
* released from the users in the notify chain.
*/
- while (!list_empty(&clockevents_released)) {
- struct clock_event_device *dev;
-
- dev = list_entry(clockevents_released.next,
- struct clock_event_device, list);
- list_del(&dev->list);
- }
+ list_for_each_safe(node, tmp, &clockevents_released)
+ list_del(node);
break;
default:
break;
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 81afb39..548c436 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -91,7 +91,6 @@
cs->name, delta);
cs->flags &= ~(CLOCK_SOURCE_VALID_FOR_HRES | CLOCK_SOURCE_WATCHDOG);
clocksource_change_rating(cs, 0);
- cs->flags &= ~CLOCK_SOURCE_WATCHDOG;
list_del(&cs->wd_list);
}
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 88267f0..fa9bb73 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -681,7 +681,7 @@
if (ts->nohz_mode != NOHZ_MODE_INACTIVE)
return 0;
- if (!timekeeping_is_continuous() || !tick_is_oneshot_available())
+ if (!timekeeping_valid_for_hres() || !tick_is_oneshot_available())
return 0;
if (!allow_nohz)
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index cd5dbc4..1af9fb0 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -201,9 +201,9 @@
#endif
/**
- * timekeeping_is_continuous - check to see if timekeeping is free running
+ * timekeeping_valid_for_hres - Check if timekeeping is suitable for hres
*/
-int timekeeping_is_continuous(void)
+int timekeeping_valid_for_hres(void)
{
unsigned long seq;
int ret;
@@ -364,7 +364,7 @@
* with losing too many ticks, otherwise we would overadjust and
* produce an even larger error. The smaller the adjustment the
* faster we try to adjust for it, as lost ticks can do less harm
- * here. This is tuned so that an error of about 1 msec is adusted
+ * here. This is tuned so that an error of about 1 msec is adjusted
* within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
*/
error2 = clock->error >> (TICK_LENGTH_SHIFT + 22 - 2 * SHIFT_HZ);
diff --git a/kernel/timeconst.pl b/kernel/timeconst.pl
new file mode 100644
index 0000000..62b1287
--- /dev/null
+++ b/kernel/timeconst.pl
@@ -0,0 +1,402 @@
+#!/usr/bin/perl
+# -----------------------------------------------------------------------
+#
+# Copyright 2007 rPath, Inc. - All Rights Reserved
+#
+# This file is part of the Linux kernel, and is made available under
+# the terms of the GNU General Public License version 2 or (at your
+# option) any later version; incorporated herein by reference.
+#
+# -----------------------------------------------------------------------
+#
+
+#
+# Usage: timeconst.pl HZ > timeconst.h
+#
+
+# Precomputed values for systems without Math::BigInt
+# Generated by:
+# timeconst.pl --can 24 32 48 64 100 122 128 200 250 256 300 512 1000 1024 1200
+%canned_values = (
+ 24 => [
+ '0xa6aaaaab','0x2aaaaaa',26,
+ '0xa6aaaaaaaaaaaaab','0x2aaaaaaaaaaaaaa',58,
+ 125,3,
+ '0xc49ba5e4','0x1fbe76c8b4',37,
+ '0xc49ba5e353f7ceda','0x1fbe76c8b439581062',69,
+ 3,125,
+ '0xa2c2aaab','0xaaaa',16,
+ '0xa2c2aaaaaaaaaaab','0xaaaaaaaaaaaa',48,
+ 125000,3,
+ '0xc9539b89','0x7fffbce4217d',47,
+ '0xc9539b8887229e91','0x7fffbce4217d2849cb25',79,
+ 3,125000,
+ ], 32 => [
+ '0xfa000000','0x6000000',27,
+ '0xfa00000000000000','0x600000000000000',59,
+ 125,4,
+ '0x83126e98','0xfdf3b645a',36,
+ '0x83126e978d4fdf3c','0xfdf3b645a1cac0831',68,
+ 4,125,
+ '0xf4240000','0x0',17,
+ '0xf424000000000000','0x0',49,
+ 31250,1,
+ '0x8637bd06','0x3fff79c842fa',46,
+ '0x8637bd05af6c69b6','0x3fff79c842fa5093964a',78,
+ 1,31250,
+ ], 48 => [
+ '0xa6aaaaab','0x6aaaaaa',27,
+ '0xa6aaaaaaaaaaaaab','0x6aaaaaaaaaaaaaa',59,
+ 125,6,
+ '0xc49ba5e4','0xfdf3b645a',36,
+ '0xc49ba5e353f7ceda','0xfdf3b645a1cac0831',68,
+ 6,125,
+ '0xa2c2aaab','0x15555',17,
+ '0xa2c2aaaaaaaaaaab','0x1555555555555',49,
+ 62500,3,
+ '0xc9539b89','0x3fffbce4217d',46,
+ '0xc9539b8887229e91','0x3fffbce4217d2849cb25',78,
+ 3,62500,
+ ], 64 => [
+ '0xfa000000','0xe000000',28,
+ '0xfa00000000000000','0xe00000000000000',60,
+ 125,8,
+ '0x83126e98','0x7ef9db22d',35,
+ '0x83126e978d4fdf3c','0x7ef9db22d0e560418',67,
+ 8,125,
+ '0xf4240000','0x0',18,
+ '0xf424000000000000','0x0',50,
+ 15625,1,
+ '0x8637bd06','0x1fff79c842fa',45,
+ '0x8637bd05af6c69b6','0x1fff79c842fa5093964a',77,
+ 1,15625,
+ ], 100 => [
+ '0xa0000000','0x0',28,
+ '0xa000000000000000','0x0',60,
+ 10,1,
+ '0xcccccccd','0x733333333',35,
+ '0xcccccccccccccccd','0x73333333333333333',67,
+ 1,10,
+ '0x9c400000','0x0',18,
+ '0x9c40000000000000','0x0',50,
+ 10000,1,
+ '0xd1b71759','0x1fff2e48e8a7',45,
+ '0xd1b71758e219652c','0x1fff2e48e8a71de69ad4',77,
+ 1,10000,
+ ], 122 => [
+ '0x8325c53f','0xfbcda3a',28,
+ '0x8325c53ef368eb05','0xfbcda3ac10c9714',60,
+ 500,61,
+ '0xf9db22d1','0x7fbe76c8b',35,
+ '0xf9db22d0e560418a','0x7fbe76c8b43958106',67,
+ 61,500,
+ '0x8012e2a0','0x3ef36',18,
+ '0x8012e29f79b47583','0x3ef368eb04325',50,
+ 500000,61,
+ '0xffda4053','0x1ffffbce4217',45,
+ '0xffda4052d666a983','0x1ffffbce4217d2849cb2',77,
+ 61,500000,
+ ], 128 => [
+ '0xfa000000','0x1e000000',29,
+ '0xfa00000000000000','0x1e00000000000000',61,
+ 125,16,
+ '0x83126e98','0x3f7ced916',34,
+ '0x83126e978d4fdf3c','0x3f7ced916872b020c',66,
+ 16,125,
+ '0xf4240000','0x40000',19,
+ '0xf424000000000000','0x4000000000000',51,
+ 15625,2,
+ '0x8637bd06','0xfffbce4217d',44,
+ '0x8637bd05af6c69b6','0xfffbce4217d2849cb25',76,
+ 2,15625,
+ ], 200 => [
+ '0xa0000000','0x0',29,
+ '0xa000000000000000','0x0',61,
+ 5,1,
+ '0xcccccccd','0x333333333',34,
+ '0xcccccccccccccccd','0x33333333333333333',66,
+ 1,5,
+ '0x9c400000','0x0',19,
+ '0x9c40000000000000','0x0',51,
+ 5000,1,
+ '0xd1b71759','0xfff2e48e8a7',44,
+ '0xd1b71758e219652c','0xfff2e48e8a71de69ad4',76,
+ 1,5000,
+ ], 250 => [
+ '0x80000000','0x0',29,
+ '0x8000000000000000','0x0',61,
+ 4,1,
+ '0x80000000','0x180000000',33,
+ '0x8000000000000000','0x18000000000000000',65,
+ 1,4,
+ '0xfa000000','0x0',20,
+ '0xfa00000000000000','0x0',52,
+ 4000,1,
+ '0x83126e98','0x7ff7ced9168',43,
+ '0x83126e978d4fdf3c','0x7ff7ced916872b020c4',75,
+ 1,4000,
+ ], 256 => [
+ '0xfa000000','0x3e000000',30,
+ '0xfa00000000000000','0x3e00000000000000',62,
+ 125,32,
+ '0x83126e98','0x1fbe76c8b',33,
+ '0x83126e978d4fdf3c','0x1fbe76c8b43958106',65,
+ 32,125,
+ '0xf4240000','0xc0000',20,
+ '0xf424000000000000','0xc000000000000',52,
+ 15625,4,
+ '0x8637bd06','0x7ffde7210be',43,
+ '0x8637bd05af6c69b6','0x7ffde7210be9424e592',75,
+ 4,15625,
+ ], 300 => [
+ '0xd5555556','0x2aaaaaaa',30,
+ '0xd555555555555556','0x2aaaaaaaaaaaaaaa',62,
+ 10,3,
+ '0x9999999a','0x1cccccccc',33,
+ '0x999999999999999a','0x1cccccccccccccccc',65,
+ 3,10,
+ '0xd0555556','0xaaaaa',20,
+ '0xd055555555555556','0xaaaaaaaaaaaaa',52,
+ 10000,3,
+ '0x9d495183','0x7ffcb923a29',43,
+ '0x9d495182a9930be1','0x7ffcb923a29c779a6b5',75,
+ 3,10000,
+ ], 512 => [
+ '0xfa000000','0x7e000000',31,
+ '0xfa00000000000000','0x7e00000000000000',63,
+ 125,64,
+ '0x83126e98','0xfdf3b645',32,
+ '0x83126e978d4fdf3c','0xfdf3b645a1cac083',64,
+ 64,125,
+ '0xf4240000','0x1c0000',21,
+ '0xf424000000000000','0x1c000000000000',53,
+ 15625,8,
+ '0x8637bd06','0x3ffef39085f',42,
+ '0x8637bd05af6c69b6','0x3ffef39085f4a1272c9',74,
+ 8,15625,
+ ], 1000 => [
+ '0x80000000','0x0',31,
+ '0x8000000000000000','0x0',63,
+ 1,1,
+ '0x80000000','0x0',31,
+ '0x8000000000000000','0x0',63,
+ 1,1,
+ '0xfa000000','0x0',22,
+ '0xfa00000000000000','0x0',54,
+ 1000,1,
+ '0x83126e98','0x1ff7ced9168',41,
+ '0x83126e978d4fdf3c','0x1ff7ced916872b020c4',73,
+ 1,1000,
+ ], 1024 => [
+ '0xfa000000','0xfe000000',32,
+ '0xfa00000000000000','0xfe00000000000000',64,
+ 125,128,
+ '0x83126e98','0x7ef9db22',31,
+ '0x83126e978d4fdf3c','0x7ef9db22d0e56041',63,
+ 128,125,
+ '0xf4240000','0x3c0000',22,
+ '0xf424000000000000','0x3c000000000000',54,
+ 15625,16,
+ '0x8637bd06','0x1fff79c842f',41,
+ '0x8637bd05af6c69b6','0x1fff79c842fa5093964',73,
+ 16,15625,
+ ], 1200 => [
+ '0xd5555556','0xd5555555',32,
+ '0xd555555555555556','0xd555555555555555',64,
+ 5,6,
+ '0x9999999a','0x66666666',31,
+ '0x999999999999999a','0x6666666666666666',63,
+ 6,5,
+ '0xd0555556','0x2aaaaa',22,
+ '0xd055555555555556','0x2aaaaaaaaaaaaa',54,
+ 2500,3,
+ '0x9d495183','0x1ffcb923a29',41,
+ '0x9d495182a9930be1','0x1ffcb923a29c779a6b5',73,
+ 3,2500,
+ ]
+);
+
+$has_bigint = eval 'use Math::BigInt qw(bgcd); 1;';
+
+sub bint($)
+{
+ my($x) = @_;
+ return Math::BigInt->new($x);
+}
+
+#
+# Constants for division by reciprocal multiplication.
+# (bits, numerator, denominator)
+#
+sub fmul($$$)
+{
+ my ($b,$n,$d) = @_;
+
+ $n = bint($n);
+ $d = bint($d);
+
+ return scalar (($n << $b)+$d-bint(1))/$d;
+}
+
+sub fadj($$$)
+{
+ my($b,$n,$d) = @_;
+
+ $n = bint($n);
+ $d = bint($d);
+
+ $d = $d/bgcd($n, $d);
+ return scalar (($d-bint(1)) << $b)/$d;
+}
+
+sub fmuls($$$) {
+ my($b,$n,$d) = @_;
+ my($s,$m);
+ my($thres) = bint(1) << ($b-1);
+
+ $n = bint($n);
+ $d = bint($d);
+
+ for ($s = 0; 1; $s++) {
+ $m = fmul($s,$n,$d);
+ return $s if ($m >= $thres);
+ }
+ return 0;
+}
+
+# Provides mul, adj, and shr factors for a specific
+# (bit, time, hz) combination
+sub muladj($$$) {
+ my($b, $t, $hz) = @_;
+ my $s = fmuls($b, $t, $hz);
+ my $m = fmul($s, $t, $hz);
+ my $a = fadj($s, $t, $hz);
+ return ($m->as_hex(), $a->as_hex(), $s);
+}
+
+# Provides numerator, denominator values
+sub numden($$) {
+ my($n, $d) = @_;
+ my $g = bgcd($n, $d);
+ return ($n/$g, $d/$g);
+}
+
+# All values for a specific (time, hz) combo
+sub conversions($$) {
+ my ($t, $hz) = @_;
+ my @val = ();
+
+ # HZ_TO_xx
+ push(@val, muladj(32, $t, $hz));
+ push(@val, muladj(64, $t, $hz));
+ push(@val, numden($t, $hz));
+
+ # xx_TO_HZ
+ push(@val, muladj(32, $hz, $t));
+ push(@val, muladj(64, $hz, $t));
+ push(@val, numden($hz, $t));
+
+ return @val;
+}
+
+sub compute_values($) {
+ my($hz) = @_;
+ my @val = ();
+ my $s, $m, $a, $g;
+
+ if (!$has_bigint) {
+ die "$0: HZ == $hz not canned and ".
+ "Math::BigInt not available\n";
+ }
+
+ # MSEC conversions
+ push(@val, conversions(1000, $hz));
+
+ # USEC conversions
+ push(@val, conversions(1000000, $hz));
+
+ return @val;
+}
+
+sub output($@)
+{
+ my($hz, @val) = @_;
+ my $pfx, $bit, $suf, $s, $m, $a;
+
+ print "/* Automatically generated by kernel/timeconst.pl */\n";
+ print "/* Conversion constants for HZ == $hz */\n";
+ print "\n";
+ print "#ifndef KERNEL_TIMECONST_H\n";
+ print "#define KERNEL_TIMECONST_H\n";
+ print "\n";
+
+ print "#include <linux/param.h>\n";
+
+ print "\n";
+ print "#if HZ != $hz\n";
+ print "#error \"kernel/timeconst.h has the wrong HZ value!\"\n";
+ print "#endif\n";
+ print "\n";
+
+ foreach $pfx ('HZ_TO_MSEC','MSEC_TO_HZ',
+ 'USEC_TO_HZ','HZ_TO_USEC') {
+ foreach $bit (32, 64) {
+ foreach $suf ('MUL', 'ADJ', 'SHR') {
+ printf "#define %-23s %s\n",
+ "${pfx}_$suf$bit", shift(@val);
+ }
+ }
+ foreach $suf ('NUM', 'DEN') {
+ printf "#define %-23s %s\n",
+ "${pfx}_$suf", shift(@val);
+ }
+ }
+
+ print "\n";
+ print "#endif /* KERNEL_TIMECONST_H */\n";
+}
+
+($hz) = @ARGV;
+
+# Use this to generate the %canned_values structure
+if ($hz eq '--can') {
+ shift(@ARGV);
+ @hzlist = sort {$a <=> $b} (@ARGV);
+
+ print "# Precomputed values for systems without Math::BigInt\n";
+ print "# Generated by:\n";
+ print "# timeconst.pl --can ", join(' ', @hzlist), "\n";
+ print "\%canned_values = (\n";
+ my $pf = "\t";
+ foreach $hz (@hzlist) {
+ my @values = compute_values($hz);
+ print "$pf$hz => [\n";
+ while (scalar(@values)) {
+ my $bit;
+ foreach $bit (32, 64) {
+ my $m = shift(@values);
+ my $a = shift(@values);
+ my $s = shift(@values);
+ print "\t\t\'",$m,"\',\'",$a,"\',",$s,",\n";
+ }
+ my $n = shift(@values);
+ my $d = shift(@values);
+ print "\t\t",$n,',',$d,",\n";
+ }
+ print "\t]";
+ $pf = ', ';
+ }
+ print "\n);\n";
+} else {
+ $hz += 0; # Force to number
+ if ($hz < 1) {
+ die "Usage: $0 HZ\n";
+ }
+
+ @val = @{$canned_values{$hz}};
+ if (!defined(@val)) {
+ @val = compute_values($hz);
+ }
+ output($hz, @val);
+}
+exit 0;
diff --git a/kernel/timer.c b/kernel/timer.c
index 70b29b5..99b00a2 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -327,7 +327,7 @@
* init_timer() must be done to a timer prior calling *any* of the
* other timer functions.
*/
-void fastcall init_timer(struct timer_list *timer)
+void init_timer(struct timer_list *timer)
{
timer->entry.next = NULL;
timer->base = __raw_get_cpu_var(tvec_bases);
@@ -339,7 +339,7 @@
}
EXPORT_SYMBOL(init_timer);
-void fastcall init_timer_deferrable(struct timer_list *timer)
+void init_timer_deferrable(struct timer_list *timer)
{
init_timer(timer);
timer_set_deferrable(timer);
@@ -979,7 +979,7 @@
int pid;
rcu_read_lock();
- pid = task_tgid_nr_ns(current->real_parent, current->nsproxy->pid_ns);
+ pid = task_tgid_vnr(current->real_parent);
rcu_read_unlock();
return pid;
@@ -1042,7 +1042,7 @@
*
* In all cases the return value is guaranteed to be non-negative.
*/
-fastcall signed long __sched schedule_timeout(signed long timeout)
+signed long __sched schedule_timeout(signed long timeout)
{
struct timer_list timer;
unsigned long expire;
diff --git a/kernel/user.c b/kernel/user.c
index bc1c48d..7d7900c 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -17,6 +17,14 @@
#include <linux/module.h>
#include <linux/user_namespace.h>
+struct user_namespace init_user_ns = {
+ .kref = {
+ .refcount = ATOMIC_INIT(2),
+ },
+ .root_user = &root_user,
+};
+EXPORT_SYMBOL_GPL(init_user_ns);
+
/*
* UID task count cache, to get fast user lookup in "alloc_uid"
* when changing user ID's (ie setuid() and friends).
@@ -427,6 +435,7 @@
suid_keys(current);
}
+#ifdef CONFIG_USER_NS
void release_uids(struct user_namespace *ns)
{
int i;
@@ -451,6 +460,7 @@
free_uid(ns->root_user);
}
+#endif
static int __init uid_cache_init(void)
{
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index 7af90fc..4c90062 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -10,17 +10,6 @@
#include <linux/nsproxy.h>
#include <linux/user_namespace.h>
-struct user_namespace init_user_ns = {
- .kref = {
- .refcount = ATOMIC_INIT(2),
- },
- .root_user = &root_user,
-};
-
-EXPORT_SYMBOL_GPL(init_user_ns);
-
-#ifdef CONFIG_USER_NS
-
/*
* Clone a new ns copying an original user ns, setting refcount to 1
* @old_ns: namespace to clone
@@ -84,5 +73,3 @@
release_uids(ns);
kfree(ns);
}
-
-#endif /* CONFIG_USER_NS */
diff --git a/kernel/wait.c b/kernel/wait.c
index f987688..c275c56 100644
--- a/kernel/wait.c
+++ b/kernel/wait.c
@@ -18,7 +18,7 @@
EXPORT_SYMBOL(init_waitqueue_head);
-void fastcall add_wait_queue(wait_queue_head_t *q, wait_queue_t *wait)
+void add_wait_queue(wait_queue_head_t *q, wait_queue_t *wait)
{
unsigned long flags;
@@ -29,7 +29,7 @@
}
EXPORT_SYMBOL(add_wait_queue);
-void fastcall add_wait_queue_exclusive(wait_queue_head_t *q, wait_queue_t *wait)
+void add_wait_queue_exclusive(wait_queue_head_t *q, wait_queue_t *wait)
{
unsigned long flags;
@@ -40,7 +40,7 @@
}
EXPORT_SYMBOL(add_wait_queue_exclusive);
-void fastcall remove_wait_queue(wait_queue_head_t *q, wait_queue_t *wait)
+void remove_wait_queue(wait_queue_head_t *q, wait_queue_t *wait)
{
unsigned long flags;
@@ -63,7 +63,7 @@
* stops them from bleeding out - it would still allow subsequent
* loads to move into the critical region).
*/
-void fastcall
+void
prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait, int state)
{
unsigned long flags;
@@ -82,7 +82,7 @@
}
EXPORT_SYMBOL(prepare_to_wait);
-void fastcall
+void
prepare_to_wait_exclusive(wait_queue_head_t *q, wait_queue_t *wait, int state)
{
unsigned long flags;
@@ -101,7 +101,7 @@
}
EXPORT_SYMBOL(prepare_to_wait_exclusive);
-void fastcall finish_wait(wait_queue_head_t *q, wait_queue_t *wait)
+void finish_wait(wait_queue_head_t *q, wait_queue_t *wait)
{
unsigned long flags;
@@ -157,7 +157,7 @@
* waiting, the actions of __wait_on_bit() and __wait_on_bit_lock() are
* permitted return codes. Nonzero return codes halt waiting and return.
*/
-int __sched fastcall
+int __sched
__wait_on_bit(wait_queue_head_t *wq, struct wait_bit_queue *q,
int (*action)(void *), unsigned mode)
{
@@ -173,7 +173,7 @@
}
EXPORT_SYMBOL(__wait_on_bit);
-int __sched fastcall out_of_line_wait_on_bit(void *word, int bit,
+int __sched out_of_line_wait_on_bit(void *word, int bit,
int (*action)(void *), unsigned mode)
{
wait_queue_head_t *wq = bit_waitqueue(word, bit);
@@ -183,7 +183,7 @@
}
EXPORT_SYMBOL(out_of_line_wait_on_bit);
-int __sched fastcall
+int __sched
__wait_on_bit_lock(wait_queue_head_t *wq, struct wait_bit_queue *q,
int (*action)(void *), unsigned mode)
{
@@ -201,7 +201,7 @@
}
EXPORT_SYMBOL(__wait_on_bit_lock);
-int __sched fastcall out_of_line_wait_on_bit_lock(void *word, int bit,
+int __sched out_of_line_wait_on_bit_lock(void *word, int bit,
int (*action)(void *), unsigned mode)
{
wait_queue_head_t *wq = bit_waitqueue(word, bit);
@@ -211,7 +211,7 @@
}
EXPORT_SYMBOL(out_of_line_wait_on_bit_lock);
-void fastcall __wake_up_bit(wait_queue_head_t *wq, void *word, int bit)
+void __wake_up_bit(wait_queue_head_t *wq, void *word, int bit)
{
struct wait_bit_key key = __WAIT_BIT_KEY_INITIALIZER(word, bit);
if (waitqueue_active(wq))
@@ -236,13 +236,13 @@
* may need to use a less regular barrier, such fs/inode.c's smp_mb(),
* because spin_unlock() does not guarantee a memory barrier.
*/
-void fastcall wake_up_bit(void *word, int bit)
+void wake_up_bit(void *word, int bit)
{
__wake_up_bit(bit_waitqueue(word, bit), word, bit);
}
EXPORT_SYMBOL(wake_up_bit);
-fastcall wait_queue_head_t *bit_waitqueue(void *word, int bit)
+wait_queue_head_t *bit_waitqueue(void *word, int bit)
{
const int shift = BITS_PER_LONG == 32 ? 5 : 6;
const struct zone *zone = page_zone(virt_to_page(word));
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 52db48e..ff06611 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -161,7 +161,7 @@
* We queue the work to the CPU it was submitted, but there is no
* guarantee that it will be processed by that CPU.
*/
-int fastcall queue_work(struct workqueue_struct *wq, struct work_struct *work)
+int queue_work(struct workqueue_struct *wq, struct work_struct *work)
{
int ret = 0;
@@ -175,7 +175,7 @@
}
EXPORT_SYMBOL_GPL(queue_work);
-void delayed_work_timer_fn(unsigned long __data)
+static void delayed_work_timer_fn(unsigned long __data)
{
struct delayed_work *dwork = (struct delayed_work *)__data;
struct cpu_workqueue_struct *cwq = get_wq_data(&dwork->work);
@@ -192,7 +192,7 @@
*
* Returns 0 if @work was already on a queue, non-zero otherwise.
*/
-int fastcall queue_delayed_work(struct workqueue_struct *wq,
+int queue_delayed_work(struct workqueue_struct *wq,
struct delayed_work *dwork, unsigned long delay)
{
timer_stats_timer_set_start_info(&dwork->timer);
@@ -388,7 +388,7 @@
* This function used to run the workqueues itself. Now we just wait for the
* helper threads to do it.
*/
-void fastcall flush_workqueue(struct workqueue_struct *wq)
+void flush_workqueue(struct workqueue_struct *wq)
{
const cpumask_t *cpu_map = wq_cpu_map(wq);
int cpu;
@@ -546,7 +546,7 @@
*
* This puts a job in the kernel-global workqueue.
*/
-int fastcall schedule_work(struct work_struct *work)
+int schedule_work(struct work_struct *work)
{
return queue_work(keventd_wq, work);
}
@@ -560,7 +560,7 @@
* After waiting for a given time this puts a job in the kernel-global
* workqueue.
*/
-int fastcall schedule_delayed_work(struct delayed_work *dwork,
+int schedule_delayed_work(struct delayed_work *dwork,
unsigned long delay)
{
timer_stats_timer_set_start_info(&dwork->timer);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4f4008f..ce0bb26 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -404,7 +404,8 @@
config DEBUG_BUGVERBOSE
bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED
depends on BUG
- depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG || BLACKFIN
+ depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || \
+ FRV || SUPERH || GENERIC_BUG || BLACKFIN || MN10300
default !EMBEDDED
help
Say Y here to make BUG() panics output the file name and line number
@@ -454,7 +455,9 @@
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH || BLACKFIN)
+ depends on DEBUG_KERNEL && \
+ (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
+ AVR32 || SUPERH || BLACKFIN || MN10300)
default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
diff --git a/lib/fault-inject.c b/lib/fault-inject.c
index 23985a2..a50a311 100644
--- a/lib/fault-inject.c
+++ b/lib/fault-inject.c
@@ -134,23 +134,26 @@
#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
-static void debugfs_ul_set(void *data, u64 val)
+static int debugfs_ul_set(void *data, u64 val)
{
*(unsigned long *)data = val;
+ return 0;
}
#ifdef CONFIG_FAULT_INJECTION_STACKTRACE_FILTER
-static void debugfs_ul_set_MAX_STACK_TRACE_DEPTH(void *data, u64 val)
+static int debugfs_ul_set_MAX_STACK_TRACE_DEPTH(void *data, u64 val)
{
*(unsigned long *)data =
val < MAX_STACK_TRACE_DEPTH ?
val : MAX_STACK_TRACE_DEPTH;
+ return 0;
}
#endif /* CONFIG_FAULT_INJECTION_STACKTRACE_FILTER */
-static u64 debugfs_ul_get(void *data)
+static int debugfs_ul_get(void *data, u64 *val)
{
- return *(unsigned long *)data;
+ *val = *(unsigned long *)data;
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_ul, debugfs_ul_get, debugfs_ul_set, "%llu\n");
@@ -174,14 +177,16 @@
}
#endif /* CONFIG_FAULT_INJECTION_STACKTRACE_FILTER */
-static void debugfs_atomic_t_set(void *data, u64 val)
+static int debugfs_atomic_t_set(void *data, u64 val)
{
atomic_set((atomic_t *)data, val);
+ return 0;
}
-static u64 debugfs_atomic_t_get(void *data)
+static int debugfs_atomic_t_get(void *data, u64 *val)
{
- return atomic_read((atomic_t *)data);
+ *val = atomic_read((atomic_t *)data);
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_atomic_t, debugfs_atomic_t_get,
diff --git a/lib/iomap.c b/lib/iomap.c
index 72c4268..db004a9 100644
--- a/lib/iomap.c
+++ b/lib/iomap.c
@@ -69,27 +69,27 @@
#define mmio_read32be(addr) be32_to_cpu(__raw_readl(addr))
#endif
-unsigned int fastcall ioread8(void __iomem *addr)
+unsigned int ioread8(void __iomem *addr)
{
IO_COND(addr, return inb(port), return readb(addr));
return 0xff;
}
-unsigned int fastcall ioread16(void __iomem *addr)
+unsigned int ioread16(void __iomem *addr)
{
IO_COND(addr, return inw(port), return readw(addr));
return 0xffff;
}
-unsigned int fastcall ioread16be(void __iomem *addr)
+unsigned int ioread16be(void __iomem *addr)
{
IO_COND(addr, return pio_read16be(port), return mmio_read16be(addr));
return 0xffff;
}
-unsigned int fastcall ioread32(void __iomem *addr)
+unsigned int ioread32(void __iomem *addr)
{
IO_COND(addr, return inl(port), return readl(addr));
return 0xffffffff;
}
-unsigned int fastcall ioread32be(void __iomem *addr)
+unsigned int ioread32be(void __iomem *addr)
{
IO_COND(addr, return pio_read32be(port), return mmio_read32be(addr));
return 0xffffffff;
@@ -110,23 +110,23 @@
#define mmio_write32be(val,port) __raw_writel(be32_to_cpu(val),port)
#endif
-void fastcall iowrite8(u8 val, void __iomem *addr)
+void iowrite8(u8 val, void __iomem *addr)
{
IO_COND(addr, outb(val,port), writeb(val, addr));
}
-void fastcall iowrite16(u16 val, void __iomem *addr)
+void iowrite16(u16 val, void __iomem *addr)
{
IO_COND(addr, outw(val,port), writew(val, addr));
}
-void fastcall iowrite16be(u16 val, void __iomem *addr)
+void iowrite16be(u16 val, void __iomem *addr)
{
IO_COND(addr, pio_write16be(val,port), mmio_write16be(val, addr));
}
-void fastcall iowrite32(u32 val, void __iomem *addr)
+void iowrite32(u32 val, void __iomem *addr)
{
IO_COND(addr, outl(val,port), writel(val, addr));
}
-void fastcall iowrite32be(u32 val, void __iomem *addr)
+void iowrite32be(u32 val, void __iomem *addr)
{
IO_COND(addr, pio_write32be(val,port), mmio_write32be(val, addr));
}
@@ -193,15 +193,15 @@
}
#endif
-void fastcall ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
+void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
{
IO_COND(addr, insb(port,dst,count), mmio_insb(addr, dst, count));
}
-void fastcall ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
+void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
{
IO_COND(addr, insw(port,dst,count), mmio_insw(addr, dst, count));
}
-void fastcall ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
+void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
{
IO_COND(addr, insl(port,dst,count), mmio_insl(addr, dst, count));
}
@@ -209,15 +209,15 @@
EXPORT_SYMBOL(ioread16_rep);
EXPORT_SYMBOL(ioread32_rep);
-void fastcall iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
{
IO_COND(addr, outsb(port, src, count), mmio_outsb(addr, src, count));
}
-void fastcall iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
{
IO_COND(addr, outsw(port, src, count), mmio_outsw(addr, src, count));
}
-void fastcall iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
{
IO_COND(addr, outsl(port, src,count), mmio_outsl(addr, src, count));
}
diff --git a/lib/rwsem-spinlock.c b/lib/rwsem-spinlock.c
index c4cfd6c..9df3ca5 100644
--- a/lib/rwsem-spinlock.c
+++ b/lib/rwsem-spinlock.c
@@ -125,7 +125,7 @@
/*
* get a read lock on the semaphore
*/
-void fastcall __sched __down_read(struct rw_semaphore *sem)
+void __sched __down_read(struct rw_semaphore *sem)
{
struct rwsem_waiter waiter;
struct task_struct *tsk;
@@ -168,7 +168,7 @@
/*
* trylock for reading -- returns 1 if successful, 0 if contention
*/
-int fastcall __down_read_trylock(struct rw_semaphore *sem)
+int __down_read_trylock(struct rw_semaphore *sem)
{
unsigned long flags;
int ret = 0;
@@ -191,7 +191,7 @@
* get a write lock on the semaphore
* - we increment the waiting count anyway to indicate an exclusive lock
*/
-void fastcall __sched __down_write_nested(struct rw_semaphore *sem, int subclass)
+void __sched __down_write_nested(struct rw_semaphore *sem, int subclass)
{
struct rwsem_waiter waiter;
struct task_struct *tsk;
@@ -231,7 +231,7 @@
;
}
-void fastcall __sched __down_write(struct rw_semaphore *sem)
+void __sched __down_write(struct rw_semaphore *sem)
{
__down_write_nested(sem, 0);
}
@@ -239,7 +239,7 @@
/*
* trylock for writing -- returns 1 if successful, 0 if contention
*/
-int fastcall __down_write_trylock(struct rw_semaphore *sem)
+int __down_write_trylock(struct rw_semaphore *sem)
{
unsigned long flags;
int ret = 0;
@@ -260,7 +260,7 @@
/*
* release a read lock on the semaphore
*/
-void fastcall __up_read(struct rw_semaphore *sem)
+void __up_read(struct rw_semaphore *sem)
{
unsigned long flags;
@@ -275,7 +275,7 @@
/*
* release a write lock on the semaphore
*/
-void fastcall __up_write(struct rw_semaphore *sem)
+void __up_write(struct rw_semaphore *sem)
{
unsigned long flags;
@@ -292,7 +292,7 @@
* downgrade a write lock into a read lock
* - just wake up any readers at the front of the queue
*/
-void fastcall __downgrade_write(struct rw_semaphore *sem)
+void __downgrade_write(struct rw_semaphore *sem)
{
unsigned long flags;
diff --git a/lib/semaphore-sleepers.c b/lib/semaphore-sleepers.c
index 1281805..0198782 100644
--- a/lib/semaphore-sleepers.c
+++ b/lib/semaphore-sleepers.c
@@ -48,12 +48,12 @@
* we cannot lose wakeup events.
*/
-fastcall void __up(struct semaphore *sem)
+void __up(struct semaphore *sem)
{
wake_up(&sem->wait);
}
-fastcall void __sched __down(struct semaphore * sem)
+void __sched __down(struct semaphore *sem)
{
struct task_struct *tsk = current;
DECLARE_WAITQUEUE(wait, tsk);
@@ -90,7 +90,7 @@
tsk->state = TASK_RUNNING;
}
-fastcall int __sched __down_interruptible(struct semaphore * sem)
+int __sched __down_interruptible(struct semaphore *sem)
{
int retval = 0;
struct task_struct *tsk = current;
@@ -153,7 +153,7 @@
* single "cmpxchg" without failure cases,
* but then it wouldn't work on a 386.
*/
-fastcall int __down_trylock(struct semaphore * sem)
+int __down_trylock(struct semaphore *sem)
{
int sleepers;
unsigned long flags;
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 7b481ce..419993f 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -126,6 +126,129 @@
return simple_strtoull(cp,endp,base);
}
+
+/**
+ * strict_strtoul - convert a string to an unsigned long strictly
+ * @cp: The string to be converted
+ * @base: The number base to use
+ * @res: The converted result value
+ *
+ * strict_strtoul converts a string to an unsigned long only if the
+ * string is really an unsigned long string, any string containing
+ * any invalid char at the tail will be rejected and -EINVAL is returned,
+ * only a newline char at the tail is acceptible because people generally
+ * change a module parameter in the following way:
+ *
+ * echo 1024 > /sys/module/e1000/parameters/copybreak
+ *
+ * echo will append a newline to the tail.
+ *
+ * It returns 0 if conversion is successful and *res is set to the converted
+ * value, otherwise it returns -EINVAL and *res is set to 0.
+ *
+ * simple_strtoul just ignores the successive invalid characters and
+ * return the converted value of prefix part of the string.
+ */
+int strict_strtoul(const char *cp, unsigned int base, unsigned long *res);
+
+/**
+ * strict_strtol - convert a string to a long strictly
+ * @cp: The string to be converted
+ * @base: The number base to use
+ * @res: The converted result value
+ *
+ * strict_strtol is similiar to strict_strtoul, but it allows the first
+ * character of a string is '-'.
+ *
+ * It returns 0 if conversion is successful and *res is set to the converted
+ * value, otherwise it returns -EINVAL and *res is set to 0.
+ */
+int strict_strtol(const char *cp, unsigned int base, long *res);
+
+/**
+ * strict_strtoull - convert a string to an unsigned long long strictly
+ * @cp: The string to be converted
+ * @base: The number base to use
+ * @res: The converted result value
+ *
+ * strict_strtoull converts a string to an unsigned long long only if the
+ * string is really an unsigned long long string, any string containing
+ * any invalid char at the tail will be rejected and -EINVAL is returned,
+ * only a newline char at the tail is acceptible because people generally
+ * change a module parameter in the following way:
+ *
+ * echo 1024 > /sys/module/e1000/parameters/copybreak
+ *
+ * echo will append a newline to the tail of the string.
+ *
+ * It returns 0 if conversion is successful and *res is set to the converted
+ * value, otherwise it returns -EINVAL and *res is set to 0.
+ *
+ * simple_strtoull just ignores the successive invalid characters and
+ * return the converted value of prefix part of the string.
+ */
+int strict_strtoull(const char *cp, unsigned int base, unsigned long long *res);
+
+/**
+ * strict_strtoll - convert a string to a long long strictly
+ * @cp: The string to be converted
+ * @base: The number base to use
+ * @res: The converted result value
+ *
+ * strict_strtoll is similiar to strict_strtoull, but it allows the first
+ * character of a string is '-'.
+ *
+ * It returns 0 if conversion is successful and *res is set to the converted
+ * value, otherwise it returns -EINVAL and *res is set to 0.
+ */
+int strict_strtoll(const char *cp, unsigned int base, long long *res);
+
+#define define_strict_strtoux(type, valtype) \
+int strict_strtou##type(const char *cp, unsigned int base, valtype *res)\
+{ \
+ char *tail; \
+ valtype val; \
+ size_t len; \
+ \
+ *res = 0; \
+ len = strlen(cp); \
+ if (len == 0) \
+ return -EINVAL; \
+ \
+ val = simple_strtoul(cp, &tail, base); \
+ if ((*tail == '\0') || \
+ ((len == (size_t)(tail - cp) + 1) && (*tail == '\n'))) {\
+ *res = val; \
+ return 0; \
+ } \
+ \
+ return -EINVAL; \
+} \
+
+#define define_strict_strtox(type, valtype) \
+int strict_strto##type(const char *cp, unsigned int base, valtype *res) \
+{ \
+ int ret; \
+ if (*cp == '-') { \
+ ret = strict_strtou##type(cp+1, base, res); \
+ if (ret != 0) \
+ *res = -(*res); \
+ } else \
+ ret = strict_strtou##type(cp, base, res); \
+ \
+ return ret; \
+} \
+
+define_strict_strtoux(l, unsigned long)
+define_strict_strtox(l, long)
+define_strict_strtoux(ll, unsigned long long)
+define_strict_strtox(ll, long long)
+
+EXPORT_SYMBOL(strict_strtoul);
+EXPORT_SYMBOL(strict_strtol);
+EXPORT_SYMBOL(strict_strtoll);
+EXPORT_SYMBOL(strict_strtoull);
+
static int skip_atoi(const char **s)
{
int i=0;
diff --git a/mm/filemap.c b/mm/filemap.c
index 5357fcc..b7b1be6 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -875,9 +875,7 @@
}
/**
- * do_generic_mapping_read - generic file read routine
- * @mapping: address_space to be read
- * @ra: file's readahead state
+ * do_generic_file_read - generic file read routine
* @filp: the file to read
* @ppos: current file position
* @desc: read_descriptor
@@ -888,18 +886,13 @@
*
* This is really ugly. But the goto's actually try to clarify some
* of the logic when it comes to error handling etc.
- *
- * Note the struct file* is only passed for the use of readpage.
- * It may be NULL.
*/
-void do_generic_mapping_read(struct address_space *mapping,
- struct file_ra_state *ra,
- struct file *filp,
- loff_t *ppos,
- read_descriptor_t *desc,
- read_actor_t actor)
+static void do_generic_file_read(struct file *filp, loff_t *ppos,
+ read_descriptor_t *desc, read_actor_t actor)
{
+ struct address_space *mapping = filp->f_mapping;
struct inode *inode = mapping->host;
+ struct file_ra_state *ra = &filp->f_ra;
pgoff_t index;
pgoff_t last_index;
pgoff_t prev_index;
@@ -1091,7 +1084,6 @@
if (filp)
file_accessed(filp);
}
-EXPORT_SYMBOL(do_generic_mapping_read);
int file_read_actor(read_descriptor_t *desc, struct page *page,
unsigned long offset, unsigned long size)
@@ -1332,7 +1324,7 @@
struct file_ra_state *ra = &file->f_ra;
struct inode *inode = mapping->host;
struct page *page;
- unsigned long size;
+ pgoff_t size;
int did_readaround = 0;
int ret = 0;
diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 0420a02..5e598c4 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -56,7 +56,8 @@
read_actor_t actor)
{
struct inode *inode = mapping->host;
- unsigned long index, end_index, offset;
+ pgoff_t index, end_index;
+ unsigned long offset;
loff_t isize;
BUG_ON(!mapping->a_ops->get_xip_page);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 1a56420..d9a3803 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -605,6 +605,16 @@
return 0;
}
+int hugetlb_overcommit_handler(struct ctl_table *table, int write,
+ struct file *file, void __user *buffer,
+ size_t *length, loff_t *ppos)
+{
+ spin_lock(&hugetlb_lock);
+ proc_doulongvec_minmax(table, write, file, buffer, length, ppos);
+ spin_unlock(&hugetlb_lock);
+ return 0;
+}
+
#endif /* CONFIG_SYSCTL */
int hugetlb_report_meminfo(char *buf)
diff --git a/mm/memory.c b/mm/memory.c
index 153a54b..e5628a5 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -134,11 +134,9 @@
*/
static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd)
{
- struct page *page = pmd_page(*pmd);
+ pgtable_t token = pmd_pgtable(*pmd);
pmd_clear(pmd);
- pte_lock_deinit(page);
- pte_free_tlb(tlb, page);
- dec_zone_page_state(page, NR_PAGETABLE);
+ pte_free_tlb(tlb, token);
tlb->mm->nr_ptes--;
}
@@ -309,21 +307,19 @@
int __pte_alloc(struct mm_struct *mm, pmd_t *pmd, unsigned long address)
{
- struct page *new = pte_alloc_one(mm, address);
+ pgtable_t new = pte_alloc_one(mm, address);
if (!new)
return -ENOMEM;
- pte_lock_init(new);
spin_lock(&mm->page_table_lock);
- if (pmd_present(*pmd)) { /* Another has populated it */
- pte_lock_deinit(new);
- pte_free(mm, new);
- } else {
+ if (!pmd_present(*pmd)) { /* Has another populated it ? */
mm->nr_ptes++;
- inc_zone_page_state(new, NR_PAGETABLE);
pmd_populate(mm, pmd, new);
+ new = NULL;
}
spin_unlock(&mm->page_table_lock);
+ if (new)
+ pte_free(mm, new);
return 0;
}
@@ -334,11 +330,13 @@
return -ENOMEM;
spin_lock(&init_mm.page_table_lock);
- if (pmd_present(*pmd)) /* Another has populated it */
- pte_free_kernel(&init_mm, new);
- else
+ if (!pmd_present(*pmd)) { /* Has another populated it ? */
pmd_populate_kernel(&init_mm, pmd, new);
+ new = NULL;
+ }
spin_unlock(&init_mm.page_table_lock);
+ if (new)
+ pte_free_kernel(&init_mm, new);
return 0;
}
@@ -1390,7 +1388,7 @@
{
pte_t *pte;
int err;
- struct page *pmd_page;
+ pgtable_t token;
spinlock_t *uninitialized_var(ptl);
pte = (mm == &init_mm) ?
@@ -1401,10 +1399,10 @@
BUG_ON(pmd_huge(*pmd));
- pmd_page = pmd_page(*pmd);
+ token = pmd_pgtable(*pmd);
do {
- err = fn(pte, pmd_page, addr, data);
+ err = fn(pte, token, addr, data);
if (err)
break;
} while (pte++, addr += PAGE_SIZE, addr != end);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 26a54a1..75b9793 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1451,7 +1451,7 @@
/*
* This is the 'heart' of the zoned buddy allocator.
*/
-struct page * fastcall
+struct page *
__alloc_pages(gfp_t gfp_mask, unsigned int order,
struct zonelist *zonelist)
{
diff --git a/mm/shmem.c b/mm/shmem.c
index 85bed94..90b576c 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -49,6 +49,7 @@
#include <linux/ctype.h>
#include <linux/migrate.h>
#include <linux/highmem.h>
+#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include <asm/div64.h>
@@ -84,6 +85,18 @@
SGP_WRITE, /* may exceed i_size, may allocate page */
};
+#ifdef CONFIG_TMPFS
+static unsigned long shmem_default_max_blocks(void)
+{
+ return totalram_pages / 2;
+}
+
+static unsigned long shmem_default_max_inodes(void)
+{
+ return min(totalram_pages - totalhigh_pages, totalram_pages / 2);
+}
+#endif
+
static int shmem_getpage(struct inode *inode, unsigned long idx,
struct page **pagep, enum sgp_type sgp, int *type);
@@ -1068,7 +1081,8 @@
}
#ifdef CONFIG_NUMA
-static inline int shmem_parse_mpol(char *value, int *policy, nodemask_t *policy_nodes)
+#ifdef CONFIG_TMPFS
+static int shmem_parse_mpol(char *value, int *policy, nodemask_t *policy_nodes)
{
char *nodelist = strchr(value, ':');
int err = 1;
@@ -1117,6 +1131,42 @@
return err;
}
+static void shmem_show_mpol(struct seq_file *seq, int policy,
+ const nodemask_t policy_nodes)
+{
+ char *policy_string;
+
+ switch (policy) {
+ case MPOL_PREFERRED:
+ policy_string = "prefer";
+ break;
+ case MPOL_BIND:
+ policy_string = "bind";
+ break;
+ case MPOL_INTERLEAVE:
+ policy_string = "interleave";
+ break;
+ default:
+ /* MPOL_DEFAULT */
+ return;
+ }
+
+ seq_printf(seq, ",mpol=%s", policy_string);
+
+ if (policy != MPOL_INTERLEAVE ||
+ !nodes_equal(policy_nodes, node_states[N_HIGH_MEMORY])) {
+ char buffer[64];
+ int len;
+
+ len = nodelist_scnprintf(buffer, sizeof(buffer), policy_nodes);
+ if (len < sizeof(buffer))
+ seq_printf(seq, ":%s", buffer);
+ else
+ seq_printf(seq, ":?");
+ }
+}
+#endif /* CONFIG_TMPFS */
+
static struct page *shmem_swapin(swp_entry_t entry, gfp_t gfp,
struct shmem_inode_info *info, unsigned long idx)
{
@@ -1148,13 +1198,20 @@
mpol_free(pvma.vm_policy);
return page;
}
-#else
+#else /* !CONFIG_NUMA */
+#ifdef CONFIG_TMPFS
static inline int shmem_parse_mpol(char *value, int *policy,
nodemask_t *policy_nodes)
{
return 1;
}
+static inline void shmem_show_mpol(struct seq_file *seq, int policy,
+ const nodemask_t policy_nodes)
+{
+}
+#endif /* CONFIG_TMPFS */
+
static inline struct page *shmem_swapin(swp_entry_t entry, gfp_t gfp,
struct shmem_inode_info *info, unsigned long idx)
{
@@ -1166,7 +1223,7 @@
{
return alloc_page(gfp);
}
-#endif
+#endif /* CONFIG_NUMA */
/*
* shmem_getpage - either get the page from swap or allocate a new one
@@ -2077,9 +2134,8 @@
.fh_to_dentry = shmem_fh_to_dentry,
};
-static int shmem_parse_options(char *options, int *mode, uid_t *uid,
- gid_t *gid, unsigned long *blocks, unsigned long *inodes,
- int *policy, nodemask_t *policy_nodes)
+static int shmem_parse_options(char *options, struct shmem_sb_info *sbinfo,
+ bool remount)
{
char *this_char, *value, *rest;
@@ -2122,35 +2178,37 @@
}
if (*rest)
goto bad_val;
- *blocks = DIV_ROUND_UP(size, PAGE_CACHE_SIZE);
+ sbinfo->max_blocks =
+ DIV_ROUND_UP(size, PAGE_CACHE_SIZE);
} else if (!strcmp(this_char,"nr_blocks")) {
- *blocks = memparse(value,&rest);
+ sbinfo->max_blocks = memparse(value, &rest);
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"nr_inodes")) {
- *inodes = memparse(value,&rest);
+ sbinfo->max_inodes = memparse(value, &rest);
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"mode")) {
- if (!mode)
+ if (remount)
continue;
- *mode = simple_strtoul(value,&rest,8);
+ sbinfo->mode = simple_strtoul(value, &rest, 8) & 07777;
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"uid")) {
- if (!uid)
+ if (remount)
continue;
- *uid = simple_strtoul(value,&rest,0);
+ sbinfo->uid = simple_strtoul(value, &rest, 0);
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"gid")) {
- if (!gid)
+ if (remount)
continue;
- *gid = simple_strtoul(value,&rest,0);
+ sbinfo->gid = simple_strtoul(value, &rest, 0);
if (*rest)
goto bad_val;
} else if (!strcmp(this_char,"mpol")) {
- if (shmem_parse_mpol(value,policy,policy_nodes))
+ if (shmem_parse_mpol(value, &sbinfo->policy,
+ &sbinfo->policy_nodes))
goto bad_val;
} else {
printk(KERN_ERR "tmpfs: Bad mount option %s\n",
@@ -2170,24 +2228,20 @@
static int shmem_remount_fs(struct super_block *sb, int *flags, char *data)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
- unsigned long max_blocks = sbinfo->max_blocks;
- unsigned long max_inodes = sbinfo->max_inodes;
- int policy = sbinfo->policy;
- nodemask_t policy_nodes = sbinfo->policy_nodes;
+ struct shmem_sb_info config = *sbinfo;
unsigned long blocks;
unsigned long inodes;
int error = -EINVAL;
- if (shmem_parse_options(data, NULL, NULL, NULL, &max_blocks,
- &max_inodes, &policy, &policy_nodes))
+ if (shmem_parse_options(data, &config, true))
return error;
spin_lock(&sbinfo->stat_lock);
blocks = sbinfo->max_blocks - sbinfo->free_blocks;
inodes = sbinfo->max_inodes - sbinfo->free_inodes;
- if (max_blocks < blocks)
+ if (config.max_blocks < blocks)
goto out;
- if (max_inodes < inodes)
+ if (config.max_inodes < inodes)
goto out;
/*
* Those tests also disallow limited->unlimited while any are in
@@ -2195,23 +2249,42 @@
* but we must separately disallow unlimited->limited, because
* in that case we have no record of how much is already in use.
*/
- if (max_blocks && !sbinfo->max_blocks)
+ if (config.max_blocks && !sbinfo->max_blocks)
goto out;
- if (max_inodes && !sbinfo->max_inodes)
+ if (config.max_inodes && !sbinfo->max_inodes)
goto out;
error = 0;
- sbinfo->max_blocks = max_blocks;
- sbinfo->free_blocks = max_blocks - blocks;
- sbinfo->max_inodes = max_inodes;
- sbinfo->free_inodes = max_inodes - inodes;
- sbinfo->policy = policy;
- sbinfo->policy_nodes = policy_nodes;
+ sbinfo->max_blocks = config.max_blocks;
+ sbinfo->free_blocks = config.max_blocks - blocks;
+ sbinfo->max_inodes = config.max_inodes;
+ sbinfo->free_inodes = config.max_inodes - inodes;
+ sbinfo->policy = config.policy;
+ sbinfo->policy_nodes = config.policy_nodes;
out:
spin_unlock(&sbinfo->stat_lock);
return error;
}
-#endif
+
+static int shmem_show_options(struct seq_file *seq, struct vfsmount *vfs)
+{
+ struct shmem_sb_info *sbinfo = SHMEM_SB(vfs->mnt_sb);
+
+ if (sbinfo->max_blocks != shmem_default_max_blocks())
+ seq_printf(seq, ",size=%luk",
+ sbinfo->max_blocks << (PAGE_CACHE_SHIFT - 10));
+ if (sbinfo->max_inodes != shmem_default_max_inodes())
+ seq_printf(seq, ",nr_inodes=%lu", sbinfo->max_inodes);
+ if (sbinfo->mode != (S_IRWXUGO | S_ISVTX))
+ seq_printf(seq, ",mode=%03o", sbinfo->mode);
+ if (sbinfo->uid != 0)
+ seq_printf(seq, ",uid=%u", sbinfo->uid);
+ if (sbinfo->gid != 0)
+ seq_printf(seq, ",gid=%u", sbinfo->gid);
+ shmem_show_mpol(seq, sbinfo->policy, sbinfo->policy_nodes);
+ return 0;
+}
+#endif /* CONFIG_TMPFS */
static void shmem_put_super(struct super_block *sb)
{
@@ -2224,15 +2297,23 @@
{
struct inode *inode;
struct dentry *root;
- int mode = S_IRWXUGO | S_ISVTX;
- uid_t uid = current->fsuid;
- gid_t gid = current->fsgid;
- int err = -ENOMEM;
struct shmem_sb_info *sbinfo;
- unsigned long blocks = 0;
- unsigned long inodes = 0;
- int policy = MPOL_DEFAULT;
- nodemask_t policy_nodes = node_states[N_HIGH_MEMORY];
+ int err = -ENOMEM;
+
+ /* Round up to L1_CACHE_BYTES to resist false sharing */
+ sbinfo = kmalloc(max((int)sizeof(struct shmem_sb_info),
+ L1_CACHE_BYTES), GFP_KERNEL);
+ if (!sbinfo)
+ return -ENOMEM;
+
+ sbinfo->max_blocks = 0;
+ sbinfo->max_inodes = 0;
+ sbinfo->mode = S_IRWXUGO | S_ISVTX;
+ sbinfo->uid = current->fsuid;
+ sbinfo->gid = current->fsgid;
+ sbinfo->policy = MPOL_DEFAULT;
+ sbinfo->policy_nodes = node_states[N_HIGH_MEMORY];
+ sb->s_fs_info = sbinfo;
#ifdef CONFIG_TMPFS
/*
@@ -2241,34 +2322,22 @@
* but the internal instance is left unlimited.
*/
if (!(sb->s_flags & MS_NOUSER)) {
- blocks = totalram_pages / 2;
- inodes = totalram_pages - totalhigh_pages;
- if (inodes > blocks)
- inodes = blocks;
- if (shmem_parse_options(data, &mode, &uid, &gid, &blocks,
- &inodes, &policy, &policy_nodes))
- return -EINVAL;
+ sbinfo->max_blocks = shmem_default_max_blocks();
+ sbinfo->max_inodes = shmem_default_max_inodes();
+ if (shmem_parse_options(data, sbinfo, false)) {
+ err = -EINVAL;
+ goto failed;
+ }
}
sb->s_export_op = &shmem_export_ops;
#else
sb->s_flags |= MS_NOUSER;
#endif
- /* Round up to L1_CACHE_BYTES to resist false sharing */
- sbinfo = kmalloc(max((int)sizeof(struct shmem_sb_info),
- L1_CACHE_BYTES), GFP_KERNEL);
- if (!sbinfo)
- return -ENOMEM;
-
spin_lock_init(&sbinfo->stat_lock);
- sbinfo->max_blocks = blocks;
- sbinfo->free_blocks = blocks;
- sbinfo->max_inodes = inodes;
- sbinfo->free_inodes = inodes;
- sbinfo->policy = policy;
- sbinfo->policy_nodes = policy_nodes;
+ sbinfo->free_blocks = sbinfo->max_blocks;
+ sbinfo->free_inodes = sbinfo->max_inodes;
- sb->s_fs_info = sbinfo;
sb->s_maxbytes = SHMEM_MAX_BYTES;
sb->s_blocksize = PAGE_CACHE_SIZE;
sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
@@ -2280,11 +2349,11 @@
sb->s_flags |= MS_POSIXACL;
#endif
- inode = shmem_get_inode(sb, S_IFDIR | mode, 0);
+ inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0);
if (!inode)
goto failed;
- inode->i_uid = uid;
- inode->i_gid = gid;
+ inode->i_uid = sbinfo->uid;
+ inode->i_gid = sbinfo->gid;
root = d_alloc_root(inode);
if (!root)
goto failed_iput;
@@ -2420,6 +2489,7 @@
#ifdef CONFIG_TMPFS
.statfs = shmem_statfs,
.remount_fs = shmem_remount_fs,
+ .show_options = shmem_show_options,
#endif
.delete_inode = shmem_delete_inode,
.drop_inode = generic_delete_inode,
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 0536dde..950c0be 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -820,7 +820,7 @@
}
-static int f(pte_t *pte, struct page *pmd_page, unsigned long addr, void *data)
+static int f(pte_t *pte, pgtable_t table, unsigned long addr, void *data)
{
/* apply_to_page_range() does all the hard work. */
return 0;
diff --git a/net/Kconfig b/net/Kconfig
index b6a5d45..6627c6a 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -30,7 +30,7 @@
config NET_NS
bool "Network namespace support"
default n
- depends on EXPERIMENTAL && !SYSFS
+ depends on EXPERIMENTAL && !SYSFS && NAMESPACES
help
Allow user space to create what appear to be multiple instances
of the network stack.
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 579f50f..2086a85 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -9,7 +9,7 @@
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.12';
+my $V = '0.14';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -24,13 +24,14 @@
my $check = 0;
my $summary = 1;
my $mailback = 0;
+my $summary_file = 0;
my $root;
+my %debug;
GetOptions(
'q|quiet+' => \$quiet,
'tree!' => \$tree,
'signoff!' => \$chk_signoff,
'patch!' => \$chk_patch,
- 'test-type!' => \$tst_type,
'emacs!' => \$emacs,
'terse!' => \$terse,
'file!' => \$file,
@@ -39,6 +40,10 @@
'root=s' => \$root,
'summary!' => \$summary,
'mailback!' => \$mailback,
+ 'summary-file!' => \$summary_file,
+
+ 'debug=s' => \%debug,
+ 'test-type!' => \$tst_type,
) or exit;
my $exit = 0;
@@ -46,16 +51,24 @@
if ($#ARGV < 0) {
print "usage: $P [options] patchfile\n";
print "version: $V\n";
- print "options: -q => quiet\n";
- print " --no-tree => run without a kernel tree\n";
- print " --terse => one line per report\n";
- print " --emacs => emacs compile window format\n";
- print " --file => check a source file\n";
- print " --strict => enable more subjective tests\n";
- print " --root => path to the kernel tree root\n";
+ print "options: -q => quiet\n";
+ print " --no-tree => run without a kernel tree\n";
+ print " --terse => one line per report\n";
+ print " --emacs => emacs compile window format\n";
+ print " --file => check a source file\n";
+ print " --strict => enable more subjective tests\n";
+ print " --root => path to the kernel tree root\n";
+ print " --no-summary => suppress the per-file summary\n";
+ print " --summary-file => include the filename in summary\n";
exit(1);
}
+my $dbg_values = 0;
+my $dbg_possible = 0;
+for my $key (keys %debug) {
+ eval "\${dbg_$key} = '$debug{$key}';"
+}
+
if ($terse) {
$emacs = 1;
$quiet++;
@@ -110,7 +123,7 @@
our $Operators = qr{
<=|>=|==|!=|
=>|->|<<|>>|<|>|!|~|
- &&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/
+ &&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%
}x;
our $NonptrType;
@@ -152,7 +165,7 @@
$Type = qr{
\b$NonptrType\b
(?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
- (?:\s+$Sparse|\s+$Attribute)*
+ (?:\s+$Inline|\s+$Sparse|\s+$Attribute)*
}x;
$Declare = qr{(?:$Storage\s+)?$Type};
}
@@ -181,6 +194,8 @@
}
my @rawlines = ();
+my @lines = ();
+my $vname;
for my $filename (@ARGV) {
if ($file) {
open(FILE, "diff -u /dev/null $filename|") ||
@@ -189,15 +204,21 @@
open(FILE, "<$filename") ||
die "$P: $filename: open failed - $!\n";
}
+ if ($filename eq '-') {
+ $vname = 'Your patch';
+ } else {
+ $vname = $filename;
+ }
while (<FILE>) {
chomp;
push(@rawlines, $_);
}
close(FILE);
- if (!process($filename, @rawlines)) {
+ if (!process($filename)) {
$exit = 1;
}
@rawlines = ();
+ @lines = ();
}
exit($exit);
@@ -274,20 +295,30 @@
my $l = '';
my $quote = '';
+ my $qlen = 0;
foreach my $c (split(//, $line)) {
+ # The second backslash of a pair is not a "quote".
+ if ($l eq "\\" && $c eq "\\") {
+ $c = 'X';
+ }
if ($l ne "\\" && ($c eq "'" || $c eq '"')) {
if ($quote eq '') {
$quote = $c;
$res .= $c;
$l = $c;
+ $qlen = 0;
next;
} elsif ($quote eq $c) {
$quote = '';
}
}
+ if ($quote eq "'" && $qlen > 1) {
+ $quote = '';
+ }
if ($quote && $c ne "\t") {
$res .= "X";
+ $qlen++;
} else {
$res .= $c;
}
@@ -295,6 +326,28 @@
$l = $c;
}
+ # Clear out the comments.
+ while ($res =~ m@(/\*.*?\*/)@g) {
+ substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
+ }
+ if ($res =~ m@(/\*.*)@) {
+ substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
+ }
+ if ($res =~ m@^.(.*\*/)@) {
+ substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
+ }
+
+ # The pathname on a #include may be surrounded by '<' and '>'.
+ if ($res =~ /^.#\s*include\s+\<(.*)\>/) {
+ my $clean = 'X' x length($1);
+ $res =~ s@\<.*\>@<$clean>@;
+
+ # The whole of a #error is a string.
+ } elsif ($res =~ /^.#\s*(?:error|warning)\s+(.*)\b/) {
+ my $clean = 'X' x length($1);
+ $res =~ s@(#\s*(?:error|warning)\s+).*@$1$clean@;
+ }
+
return $res;
}
@@ -305,30 +358,36 @@
my $soff = $off;
my $coff = $off - 1;
+ my $loff = 0;
+
my $type = '';
my $level = 0;
my $c;
my $len = 0;
+
+ my $remainder;
while (1) {
#warn "CSB: blk<$blk>\n";
# If we are about to drop off the end, pull in more
# context.
if ($off >= $len) {
for (; $remain > 0; $line++) {
- next if ($rawlines[$line] =~ /^-/);
+ next if ($lines[$line] =~ /^-/);
$remain--;
- $blk .= sanitise_line($rawlines[$line]) . "\n";
+ $loff = $len;
+ $blk .= $lines[$line] . "\n";
$len = length($blk);
$line++;
last;
}
# Bail if there is no further context.
#warn "CSB: blk<$blk> off<$off> len<$len>\n";
- if ($off == $len) {
+ if ($off >= $len) {
last;
}
}
$c = substr($blk, $off, 1);
+ $remainder = substr($blk, $off);
#warn "CSB: c<$c> type<$type> level<$level>\n";
# Statement ends at the ';' or a close '}' at the
@@ -337,6 +396,12 @@
last;
}
+ # An else is really a conditional as long as its not else if
+ if ($level == 0 && $remainder =~ /(\s+else)(?:\s|{)/ &&
+ $remainder !~ /\s+else\s+if\b/) {
+ $coff = $off + length($1);
+ }
+
if (($type eq '' || $type eq '(') && $c eq '(') {
$level++;
$type = '(';
@@ -363,6 +428,10 @@
}
$off++;
}
+ if ($off == $len) {
+ $line++;
+ $remain--;
+ }
my $statement = substr($blk, $soff, $off - $soff + 1);
my $condition = substr($blk, $soff, $coff - $soff + 1);
@@ -370,7 +439,30 @@
#warn "STATEMENT<$statement>\n";
#warn "CONDITION<$condition>\n";
- return ($statement, $condition);
+ #print "off<$off> loff<$loff>\n";
+
+ return ($statement, $condition,
+ $line, $remain + 1, $off - $loff + 1, $level);
+}
+
+sub ctx_statement_full {
+ my ($linenr, $remain, $off) = @_;
+ my ($statement, $condition, $level);
+
+ my (@chunks);
+
+ ($statement, $condition, $linenr, $remain, $off, $level) =
+ ctx_statement_block($linenr, $remain, $off);
+ #print "F: c<$condition> s<$statement>\n";
+ for (;;) {
+ push(@chunks, [ $condition, $statement ]);
+ last if (!($remain > 0 && $condition =~ /^.\s*(?:if|else|do)/));
+ ($statement, $condition, $linenr, $remain, $off, $level) =
+ ctx_statement_block($linenr, $remain, $off);
+ #print "C: c<$condition> s<$statement>\n";
+ }
+
+ return ($level, $linenr, @chunks);
}
sub ctx_block_get {
@@ -500,103 +592,110 @@
return $res;
}
+my $av_preprocessor = 0;
+my $av_paren = 0;
+my @av_paren_type;
+
+sub annotate_reset {
+ $av_preprocessor = 0;
+ $av_paren = 0;
+ @av_paren_type = ();
+}
+
sub annotate_values {
my ($stream, $type) = @_;
my $res;
my $cur = $stream;
- my $debug = 0;
-
- print "$stream\n" if ($debug);
-
- ##my $type = 'N';
- my $pos = 0;
- my $preprocessor = 0;
- my $paren = 0;
- my @paren_type;
+ print "$stream\n" if ($dbg_values > 1);
while (length($cur)) {
- print " <$type> " if ($debug);
+ print " <$type> " if ($dbg_values > 1);
if ($cur =~ /^(\s+)/o) {
- print "WS($1)\n" if ($debug);
- if ($1 =~ /\n/ && $preprocessor) {
- $preprocessor = 0;
+ print "WS($1)\n" if ($dbg_values > 1);
+ if ($1 =~ /\n/ && $av_preprocessor) {
+ $av_preprocessor = 0;
$type = 'N';
}
} elsif ($cur =~ /^($Type)/) {
- print "DECLARE($1)\n" if ($debug);
+ print "DECLARE($1)\n" if ($dbg_values > 1);
$type = 'T';
} elsif ($cur =~ /^(#\s*define\s*$Ident)(\(?)/o) {
- print "DEFINE($1)\n" if ($debug);
- $preprocessor = 1;
- $paren_type[$paren] = 'N';
+ print "DEFINE($1)\n" if ($dbg_values > 1);
+ $av_preprocessor = 1;
+ $av_paren_type[$av_paren] = 'N';
- } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if|else|endif))/o) {
- print "PRE($1)\n" if ($debug);
- $preprocessor = 1;
+ } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if|else|elif|endif))/o) {
+ print "PRE($1)\n" if ($dbg_values > 1);
+ $av_preprocessor = 1;
$type = 'N';
} elsif ($cur =~ /^(\\\n)/o) {
- print "PRECONT($1)\n" if ($debug);
+ print "PRECONT($1)\n" if ($dbg_values > 1);
} elsif ($cur =~ /^(sizeof)\s*(\()?/o) {
- print "SIZEOF($1)\n" if ($debug);
+ print "SIZEOF($1)\n" if ($dbg_values > 1);
if (defined $2) {
- $paren_type[$paren] = 'V';
+ $av_paren_type[$av_paren] = 'V';
}
$type = 'N';
- } elsif ($cur =~ /^(if|while|typeof|for)\b/o) {
- print "COND($1)\n" if ($debug);
- $paren_type[$paren] = 'N';
+ } elsif ($cur =~ /^(if|while|typeof|__typeof__|for)\b/o) {
+ print "COND($1)\n" if ($dbg_values > 1);
+ $av_paren_type[$av_paren] = 'N';
$type = 'N';
} elsif ($cur =~/^(return|case|else)/o) {
- print "KEYWORD($1)\n" if ($debug);
+ print "KEYWORD($1)\n" if ($dbg_values > 1);
$type = 'N';
} elsif ($cur =~ /^(\()/o) {
- print "PAREN('$1')\n" if ($debug);
- $paren++;
+ print "PAREN('$1')\n" if ($dbg_values > 1);
+ $av_paren++;
$type = 'N';
} elsif ($cur =~ /^(\))/o) {
- $paren-- if ($paren > 0);
- if (defined $paren_type[$paren]) {
- $type = $paren_type[$paren];
- undef $paren_type[$paren];
- print "PAREN('$1') -> $type\n" if ($debug);
+ $av_paren-- if ($av_paren > 0);
+ if (defined $av_paren_type[$av_paren]) {
+ $type = $av_paren_type[$av_paren];
+ undef $av_paren_type[$av_paren];
+ print "PAREN('$1') -> $type\n"
+ if ($dbg_values > 1);
} else {
- print "PAREN('$1')\n" if ($debug);
+ print "PAREN('$1')\n" if ($dbg_values > 1);
}
} elsif ($cur =~ /^($Ident)\(/o) {
- print "FUNC($1)\n" if ($debug);
- $paren_type[$paren] = 'V';
+ print "FUNC($1)\n" if ($dbg_values > 1);
+ $av_paren_type[$av_paren] = 'V';
} elsif ($cur =~ /^($Ident|$Constant)/o) {
- print "IDENT($1)\n" if ($debug);
+ print "IDENT($1)\n" if ($dbg_values > 1);
$type = 'V';
} elsif ($cur =~ /^($Assignment)/o) {
- print "ASSIGN($1)\n" if ($debug);
+ print "ASSIGN($1)\n" if ($dbg_values > 1);
$type = 'N';
+ } elsif ($cur =~/^(;)/) {
+ print "END($1)\n" if ($dbg_values > 1);
+ $type = 'E';
+
} elsif ($cur =~ /^(;|{|}|\?|:|\[)/o) {
- print "END($1)\n" if ($debug);
+ print "CLOSE($1)\n" if ($dbg_values > 1);
$type = 'N';
} elsif ($cur =~ /^($Operators)/o) {
- print "OP($1)\n" if ($debug);
+ print "OP($1)\n" if ($dbg_values > 1);
if ($1 ne '++' && $1 ne '--') {
$type = 'N';
}
} elsif ($cur =~ /(^.)/o) {
- print "C($1)\n" if ($debug);
+ print "C($1)\n" if ($dbg_values > 1);
}
if (defined $1) {
$cur = substr($cur, length($1));
@@ -608,7 +707,7 @@
}
sub possible {
- my ($possible) = @_;
+ my ($possible, $line) = @_;
#print "CHECK<$possible>\n";
if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
@@ -616,7 +715,7 @@
$possible ne 'struct' && $possible ne 'enum' &&
$possible ne 'case' && $possible ne 'else' &&
$possible ne 'typedef') {
- #print "POSSIBLE<$possible>\n";
+ warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
push(@typeList, $possible);
build_types();
}
@@ -624,16 +723,15 @@
my $prefix = '';
-my @report = ();
sub report {
my $line = $prefix . $_[0];
$line = (split('\n', $line))[0] . "\n" if ($terse);
- push(@report, $line);
+ push(our @report, $line);
}
sub report_dump {
- @report;
+ our @report;
}
sub ERROR {
report("ERROR: $_[0]\n");
@@ -655,11 +753,12 @@
sub process {
my $filename = shift;
- my @lines = @_;
my $linenr=0;
my $prevline="";
+ my $prevrawline="";
my $stashline="";
+ my $stashrawline="";
my $length;
my $indent;
@@ -670,6 +769,7 @@
my $signoff = 0;
my $is_patch = 0;
+ our @report = ();
our $cnt_lines = 0;
our $cnt_error = 0;
our $cnt_warn = 0;
@@ -681,14 +781,29 @@
my $realcnt = 0;
my $here = '';
my $in_comment = 0;
+ my $comment_edge = 0;
my $first_line = 0;
- my $prev_values = 'N';
+ my $prev_values = 'E';
+ # suppression flags
+ my $suppress_ifbraces = 0;
+
+ # Pre-scan the patch sanitizing the lines.
# Pre-scan the patch looking for any __setup documentation.
+ #
my @setup_docs = ();
my $setup_docs = 0;
- foreach my $line (@lines) {
+ my $line;
+ foreach my $rawline (@rawlines) {
+ # Standardise the strings and chars within the input to
+ # simplify matching.
+ $line = sanitise_line($rawline);
+ push(@lines, $line);
+
+ ##print "==>$rawline\n";
+ ##print "-->$line\n";
+
if ($line=~/^\+\+\+\s+(\S+)/) {
$setup_docs = 0;
if ($1 =~ m@Documentation/kernel-parameters.txt$@) {
@@ -707,8 +822,7 @@
foreach my $line (@lines) {
$linenr++;
- my $rawline = $line;
-
+ my $rawline = $rawlines[$linenr - 1];
#extract the filename as it passes
if ($line=~/^\+\+\+\s+(\S+)/) {
@@ -728,7 +842,10 @@
} else {
$realcnt=1+1;
}
- $prev_values = 'N';
+ annotate_reset();
+ $prev_values = 'E';
+
+ $suppress_ifbraces = $linenr - 1;
next;
}
@@ -746,7 +863,7 @@
if ($linenr == $first_line) {
my $edge;
for (my $ln = $first_line; $ln < ($linenr + $realcnt); $ln++) {
- ($edge) = ($lines[$ln - 1] =~ m@(/\*|\*/)@);
+ ($edge) = ($rawlines[$ln - 1] =~ m@(/\*|\*/)@);
last if (defined $edge);
}
if (defined $edge && $edge eq '*/') {
@@ -757,25 +874,30 @@
# Guestimate if this is a continuing comment. If this
# is the start of a diff block and this line starts
# ' *' then it is very likely a comment.
- if ($linenr == $first_line and $line =~ m@^.\s*\*@) {
+ if ($linenr == $first_line and $rawline =~ m@^.\s* \*(?:\s|$)@) {
$in_comment = 1;
}
# Find the last comment edge on _this_ line.
- while (($line =~ m@(/\*|\*/)@g)) {
+ $comment_edge = 0;
+ while (($rawline =~ m@(/\*|\*/)@g)) {
if ($1 eq '/*') {
$in_comment = 1;
} else {
$in_comment = 0;
}
+ $comment_edge = 1;
}
# Measure the line length and indent.
- ($length, $indent) = line_stats($line);
+ ($length, $indent) = line_stats($rawline);
# Track the previous line.
($prevline, $stashline) = ($stashline, $line);
($previndent, $stashindent) = ($stashindent, $indent);
+ ($prevrawline, $stashrawline) = ($stashrawline, $rawline);
+
+ #warn "ic<$in_comment> ce<$comment_edge> line<$line>\n";
} elsif ($realcnt == 1) {
$realcnt--;
@@ -786,9 +908,9 @@
$here = "#$realline: " if ($file);
$here .= "FILE: $realfile:$realline:" if ($realcnt != 0);
- my $hereline = "$here\n$line\n";
- my $herecurr = "$here\n$line\n";
- my $hereprev = "$here\n$prevline\n$line\n";
+ my $hereline = "$here\n$rawline\n";
+ my $herecurr = "$here\n$rawline\n";
+ my $hereprev = "$here\n$prevrawline\n$rawline\n";
$prefix = "$filename:$realline: " if ($emacs && $file);
$prefix = "$filename:$linenr: " if ($emacs && !$file);
@@ -816,7 +938,7 @@
# UTF-8 regex found at http://www.w3.org/International/questions/qa-forms-utf-8.en.php
if (($realfile =~ /^$/ || $line =~ /^\+/) &&
- !($line =~ m/^(
+ !($rawline =~ m/^(
[\x09\x0A\x0D\x20-\x7E] # ASCII
| [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte
| \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs
@@ -826,7 +948,7 @@
| [\xF1-\xF3][\x80-\xBF]{3} # planes 4-15
| \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16
)*$/x )) {
- ERROR("Invalid UTF-8\n" . $herecurr);
+ ERROR("Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $herecurr);
}
#ignore lines being removed
@@ -837,15 +959,15 @@
#trailing whitespace
if ($line =~ /^\+.*\015/) {
- my $herevet = "$here\n" . cat_vet($line) . "\n";
+ my $herevet = "$here\n" . cat_vet($rawline) . "\n";
ERROR("DOS line endings\n" . $herevet);
- } elsif ($line =~ /^\+.*\S\s+$/ || $line =~ /^\+\s+$/) {
- my $herevet = "$here\n" . cat_vet($line) . "\n";
+ } elsif ($rawline =~ /^\+.*\S\s+$/ || $rawline =~ /^\+\s+$/) {
+ my $herevet = "$here\n" . cat_vet($rawline) . "\n";
ERROR("trailing whitespace\n" . $herevet);
}
#80 column limit
- if ($line =~ /^\+/ && !($prevline=~/\/\*\*/) && $length > 80) {
+ if ($line =~ /^\+/ && !($prevrawline=~/\/\*\*/) && $length > 80) {
WARN("line over 80 characters\n" . $herecurr);
}
@@ -859,46 +981,48 @@
# at the beginning of a line any tabs must come first and anything
# more than 8 must use tabs.
- if ($line=~/^\+\s* \t\s*\S/ or $line=~/^\+\s* \s*/) {
- my $herevet = "$here\n" . cat_vet($line) . "\n";
+ if ($rawline =~ /^\+\s* \t\s*\S/ ||
+ $rawline =~ /^\+\s* \s*/) {
+ my $herevet = "$here\n" . cat_vet($rawline) . "\n";
ERROR("use tabs not spaces\n" . $herevet);
}
-# Remove comments from the line before processing.
- my $comment_edge = ($line =~ s@/\*.*\*/@@g) +
- ($line =~ s@/\*.*@@) +
- ($line =~ s@^(.).*\*/@$1@);
+# check for RCS/CVS revision markers
+ if ($rawline =~ /\$(Revision|Log|Id)(?:\$|)/) {
+ WARN("CVS style keyword markers, these will _not_ be updated\n". $herecurr);
+ }
# The rest of our checks refer specifically to C style
# only apply those _outside_ comments. Only skip
# lines in the middle of comments.
next if (!$comment_edge && $in_comment);
-# Standardise the strings and chars within the input to simplify matching.
- $line = sanitise_line($line);
-
# Check for potential 'bare' types
- if ($realcnt &&
- $line !~ /$Ident:\s*$/ &&
- ($line =~ /^.\s*$Ident\s*\(\*+\s*$Ident\)\s*\(/ ||
- $line !~ /^.\s*$Ident\s*\(/)) {
+ if ($realcnt) {
+ # Ignore goto labels.
+ if ($line =~ /$Ident:\*$/) {
+
+ # Ignore functions being called
+ } elsif ($line =~ /^.\s*$Ident\s*\(/) {
+
# definitions in global scope can only start with types
- if ($line =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/) {
- possible($1);
+ } elsif ($line =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/) {
+ possible($1, $line);
# declarations always start with types
- } elsif ($prev_values eq 'N' && $line =~ /^.\s*(?:$Storage\s+)?($Ident)\b\s*\**\s*$Ident\s*(?:;|=)/) {
+ } elsif ($prev_values eq 'E' && $line =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/) {
possible($1);
+ }
# any (foo ... *) is a pointer cast, and foo is a type
- } elsif ($line =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/) {
- possible($1);
+ while ($line =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/g) {
+ possible($1, $line);
}
# Check for any sort of function declaration.
# int foo(something bar, other baz);
# void (*store_gdt)(x86_descr_ptr *);
- if ($prev_values eq 'N' && $line =~ /^(.(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/) {
+ if ($prev_values eq 'E' && $line =~ /^(.(?:typedef\s*)?(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/) {
my ($name_len) = length($1);
my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, $name_len);
my $ctx = join("\n", @ctx);
@@ -909,7 +1033,7 @@
for my $arg (split(/\s*,\s*/, $ctx)) {
if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/ || $arg =~ /^($Ident)$/) {
- possible($1);
+ possible($1, $line);
}
}
}
@@ -974,8 +1098,11 @@
my $opline = $line; $opline =~ s/^./ /;
my $curr_values = annotate_values($opline . "\n", $prev_values);
$curr_values = $prev_values . $curr_values;
- #warn "--> $opline\n";
- #warn "--> $curr_values ($prev_values)\n";
+ if ($dbg_values) {
+ my $outline = $opline; $outline =~ s/\t/ /g;
+ warn "--> .$outline\n";
+ warn "--> $curr_values\n";
+ }
$prev_values = substr($curr_values, -1);
#ignore lines not being added
@@ -1004,9 +1131,6 @@
ERROR("malformed #include filename\n" .
$herecurr);
}
- # Sanitise this special form of string.
- $path = 'X' x length($path);
- $line =~ s{\<.*\>}{<$path>};
}
# no C99 // comments
@@ -1074,7 +1198,7 @@
# }
if ($line =~ /\bLINUX_VERSION_CODE\b/) {
- WARN("LINUX_VERSION_CODE should be avoided, code should be for the version to which it is merged" . $herecurr);
+ WARN("LINUX_VERSION_CODE should be avoided, code should be for the version to which it is merged\n" . $herecurr);
}
# printk should use KERN_* levels. Note that follow on printk's on the
@@ -1102,7 +1226,7 @@
# function brace can't be on same line, except for #defines of do while,
# or if closed on same line
- if (($line=~/$Type\s*[A-Za-z\d_]+\(.*\).* {/) and
+ if (($line=~/$Type\s*[A-Za-z\d_]+\(.*\).*\s{/) and
!($line=~/\#define.*do\s{/) and !($line=~/}/)) {
ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr);
}
@@ -1115,8 +1239,22 @@
# check for spaces between functions and their parentheses.
while ($line =~ /($Ident)\s+\(/g) {
- if ($1 !~ /^(?:if|for|while|switch|return|volatile|__volatile__|__attribute__|format|__extension__|Copyright|case)$/ &&
- $line !~ /$Type\s+\(/ && $line !~ /^.\#\s*define\b/) {
+ my $name = $1;
+ my $ctx = substr($line, 0, $-[1]);
+
+ # Ignore those directives where spaces _are_ permitted.
+ if ($name =~ /^(?:if|for|while|switch|return|volatile|__volatile__|__attribute__|format|__extension__|Copyright|case|__asm__)$/) {
+
+ # cpp #define statements have non-optional spaces, ie
+ # if there is a space between the name and the open
+ # parenthesis it is simply not a parameter group.
+ } elsif ($ctx =~ /^.\#\s*define\s*$/) {
+
+ # If this whole things ends with a type its most
+ # likely a typedef for a function.
+ } elsif ("$ctx$name" =~ /$Type$/) {
+
+ } else {
WARN("no space between function name and open parenthesis '('\n" . $herecurr);
}
}
@@ -1126,9 +1264,9 @@
<<=|>>=|<=|>=|==|!=|
\+=|-=|\*=|\/=|%=|\^=|\|=|&=|
=>|->|<<|>>|<|>|=|!|~|
- &&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/
+ &&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%
}x;
- my @elements = split(/($ops|;)/, $opline);
+ my @elements = split(/($;+|$ops|;)/, $opline);
my $off = 0;
my $blank = copy_spacing($opline);
@@ -1188,8 +1326,15 @@
# print "UNARY: <$op_left$op_type $is_unary $a:$op:$c> <$ca:$op:$cc> <$unary_ctx>\n";
#}
+ # Ignore operators passed as parameters.
+ if ($op_type ne 'V' &&
+ $ca =~ /\s$/ && $cc =~ /^\s*,/) {
+
+ # Ignore comments
+ } elsif ($op =~ /^$;+$/) {
+
# ; should have either the end of line or a space or \ after it
- if ($op eq ';') {
+ } elsif ($op eq ';') {
if ($ctx !~ /.x[WEB]/ && $cc !~ /^\\/ &&
$cc !~ /^;/) {
ERROR("need space after that '$op' $at\n" . $hereptr);
@@ -1231,7 +1376,7 @@
if ($ctx !~ /[WOB]x[^W]/ && $ctx !~ /[^W]x[WOBE]/) {
ERROR("need space one side of that '$op' $at\n" . $hereptr);
}
- if ($ctx =~ /Wx./ && $cc =~ /^;/) {
+ if ($ctx =~ /WxB/ || ($ctx =~ /Wx./ && $cc =~ /^;/)) {
ERROR("no space before that '$op' $at\n" . $hereptr);
}
@@ -1239,7 +1384,8 @@
} elsif ($op eq '<<' or $op eq '>>' or
$op eq '&' or $op eq '^' or $op eq '|' or
$op eq '+' or $op eq '-' or
- $op eq '*' or $op eq '/')
+ $op eq '*' or $op eq '/' or
+ $op eq '%')
{
if ($ctx !~ /VxV|WxW|VxE|WxE|VxO/) {
ERROR("need consistent spacing around '$op' $at\n" .
@@ -1303,7 +1449,7 @@
$line !~ /for\s*\(\s+;/) {
ERROR("no space after that open parenthesis '('\n" . $herecurr);
}
- if ($line =~ /\s\)/ && $line !~ /^.\s*\)/ &&
+ if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ &&
$line !~ /for\s*\(.*;\s+\)/) {
ERROR("no space before that close parenthesis ')'\n" . $herecurr);
}
@@ -1324,23 +1470,41 @@
my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0);
if ($c =~ /\bif\s*\(.*[^<>!=]=[^=].*/) {
- ERROR("do not use assignment in if condition ($c)\n" . $herecurr);
+ ERROR("do not use assignment in if condition\n" . $herecurr);
}
# Find out what is on the end of the line after the
# conditional.
substr($s, 0, length($c)) = '';
$s =~ s/\n.*//g;
-
- if (length($c) && $s !~ /^\s*({|;|\/\*.*\*\/)?\s*\\*\s*$/) {
+ $s =~ s/$;//g; # Remove any comments
+ if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/) {
ERROR("trailing statements should be on next line\n" . $herecurr);
}
}
+# Check for bitwise tests written as boolean
+ if ($line =~ /
+ (?:
+ (?:\[|\(|\&\&|\|\|)
+ \s*0[xX][0-9]+\s*
+ (?:\&\&|\|\|)
+ |
+ (?:\&\&|\|\|)
+ \s*0[xX][0-9]+\s*
+ (?:\&\&|\|\||\)|\])
+ )/x)
+ {
+ WARN("boolean test with hexadecimal, perhaps just 1 \& or \|?\n" . $herecurr);
+ }
+
# if and else should not have general statements after it
- if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/ &&
- $1 !~ /^\s*(?:\sif|{|\\|$)/) {
- ERROR("trailing statements should be on next line\n" . $herecurr);
+ if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/) {
+ my $s = $1;
+ $s =~ s/$;//g; # Remove any comments
+ if ($s !~ /^\s*(?:\sif|(?:{|)\s*\\?\s*$)/) {
+ ERROR("trailing statements should be on next line\n" . $herecurr);
+ }
}
# Check for }<nl>else {, these must be at the same
@@ -1350,6 +1514,20 @@
ERROR("else should follow close brace '}'\n" . $hereprev);
}
+ if ($prevline=~/}\s*$/ and $line=~/^.\s*while\s*/ and
+ $previndent == $indent) {
+ my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0);
+
+ # Find out what is on the end of the line after the
+ # conditional.
+ substr($s, 0, length($c)) = '';
+ $s =~ s/\n.*//g;
+
+ if ($s =~ /^\s*;/) {
+ ERROR("while should follow close brace '}'\n" . $hereprev);
+ }
+ }
+
#studly caps, commented out until figure out how to distinguish between use of existing and adding new
# if (($line=~/[\w_][a-z\d]+[A-Z]/) and !($line=~/print/)) {
# print "No studly caps, use _\n";
@@ -1419,7 +1597,48 @@
}
# check for redundant bracing round if etc
- if ($line =~ /\b(if|while|for|else)\b/) {
+ if ($line =~ /(^.*)\bif\b/ && $1 !~ /else\s*$/) {
+ my ($level, $endln, @chunks) =
+ ctx_statement_full($linenr, $realcnt, 0);
+ #print "chunks<$#chunks> linenr<$linenr> endln<$endln> level<$level>\n";
+ if ($#chunks > 1 && $level == 0) {
+ my $allowed = 0;
+ my $seen = 0;
+ for my $chunk (@chunks) {
+ my ($cond, $block) = @{$chunk};
+
+ substr($block, 0, length($cond)) = '';
+
+ $seen++ if ($block =~ /^\s*{/);
+
+ $block =~ s/(^|\n)./$1/g;
+ $block =~ s/^\s*{//;
+ $block =~ s/}\s*$//;
+ $block =~ s/^\s*//;
+ $block =~ s/\s*$//;
+
+ my @lines = ($block =~ /\n/g);
+ my @statements = ($block =~ /;/g);
+
+ #print "cond<$cond> block<$block> lines<" . scalar(@lines) . "> statements<" . scalar(@statements) . "> seen<$seen> allowed<$allowed>\n";
+ if (scalar(@lines) != 0) {
+ $allowed = 1;
+ }
+ if ($block =~/\b(?:if|for|while)\b/) {
+ $allowed = 1;
+ }
+ if (scalar(@statements) > 1) {
+ $allowed = 1;
+ }
+ }
+ if ($seen && !$allowed) {
+ WARN("braces {} are not necessary for any arm of this statement\n" . $herecurr);
+ $suppress_ifbraces = $endln;
+ }
+ }
+ }
+ if ($linenr > $suppress_ifbraces &&
+ $line =~ /\b(if|while|for|else)\b/) {
# Locate the end of the opening statement.
my @control = ctx_statement($linenr, $realcnt, 0);
my $nr = $linenr + (scalar(@control) - 1);
@@ -1442,13 +1661,16 @@
my $after = $1;
#print "block<" . join(' ', @block) . "><" . scalar(@block) . ">\n";
- #print "stmt<$stmt>\n\n";
+ #print "before<$before> stmt<$stmt> after<$after>\n\n";
# Count the newlines, if there is only one
# then the block should not have {}'s.
my @lines = ($stmt =~ /\n/g);
+ my @statements = ($stmt =~ /;/g);
#print "lines<" . scalar(@lines) . ">\n";
+ #print "statements<" . scalar(@statements) . ">\n";
if ($lvl == 0 && scalar(@lines) == 0 &&
+ scalar(@statements) < 2 &&
$stmt !~ /{/ && $stmt !~ /\bif\b/ &&
$before !~ /}/ && $after !~ /{/) {
my $herectx = "$here\n" . join("\n", @control, @block[1 .. $#block]) . "\n";
@@ -1557,6 +1779,17 @@
if ($line =~ /\*\s*\)\s*k[czm]alloc\b/) {
WARN("unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html\n" . $herecurr);
}
+
+# check for gcc specific __FUNCTION__
+ if ($line =~ /__FUNCTION__/) {
+ WARN("__func__ should be used instead of gcc specific __FUNCTION__\n" . $herecurr);
+ }
+ }
+
+ # If we have no input at all, then there is nothing to report on
+ # so just keep quiet.
+ if ($#rawlines == -1) {
+ exit(0);
}
# In mailback mode only produce a report in the negative, for
@@ -1579,7 +1812,8 @@
}
print report_dump();
- if ($summary) {
+ if ($summary && !($clean == 1 && $quiet == 1)) {
+ print "$filename " if ($summary_file);
print "total: $cnt_error errors, $cnt_warn warnings, " .
(($check)? "$cnt_chk checks, " : "") .
"$cnt_lines lines checked\n";
@@ -1587,12 +1821,22 @@
}
if ($clean == 1 && $quiet == 0) {
- print "Your patch has no obvious style problems and is ready for submission.\n"
+ print "$vname has no obvious style problems and is ready for submission.\n"
}
if ($clean == 0 && $quiet == 0) {
- print "Your patch has style problems, please review. If any of these errors\n";
+ print "$vname has style problems, please review. If any of these errors\n";
print "are false positives report them to the maintainer, see\n";
print "CHECKPATCH in MAINTAINERS.\n";
}
+ print <<EOL if ($file == 1 && $quiet == 0);
+
+WARNING: Using --file mode. Please do not send patches to linux-kernel
+that change whole existing files if you did not significantly change most
+of the the file for other reasons anyways or just wrote the file newly
+from scratch. Pure code style patches have a significant cost in a
+quickly changing code base like Linux because they cause rejects
+with other changes.
+EOL
+
return $clean;
}
diff --git a/sound/oss/swarm_cs4297a.c b/sound/oss/swarm_cs4297a.c
index a8057f2..044453a 100644
--- a/sound/oss/swarm_cs4297a.c
+++ b/sound/oss/swarm_cs4297a.c
@@ -1580,7 +1580,7 @@
// ******************************************************************************************
// Mixer file operations struct.
// ******************************************************************************************
-static /*const */ struct file_operations cs4297a_mixer_fops = {
+static const struct file_operations cs4297a_mixer_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.ioctl = cs4297a_ioctl_mixdev,
@@ -2491,7 +2491,7 @@
// ******************************************************************************************
// Wave (audio) file operations struct.
// ******************************************************************************************
-static /*const */ struct file_operations cs4297a_audio_fops = {
+static const struct file_operations cs4297a_audio_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = cs4297a_read,
diff --git a/sound/oss/trident.c b/sound/oss/trident.c
index 6959ee1..d6af906 100644
--- a/sound/oss/trident.c
+++ b/sound/oss/trident.c
@@ -2878,7 +2878,7 @@
return 0;
}
-static /*const */ struct file_operations trident_audio_fops = {
+static const struct file_operations trident_audio_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = trident_read,
@@ -4104,7 +4104,7 @@
return codec->mixer_ioctl(codec, cmd, arg);
}
-static /*const */ struct file_operations trident_mixer_fops = {
+static const struct file_operations trident_mixer_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.ioctl = trident_ioctl_mixdev,
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 3c4fe26..32fbf80 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1186,38 +1186,38 @@
.priority = 20, /* must be > scheduler priority */
};
-static u64 vm_stat_get(void *_offset)
+static int vm_stat_get(void *_offset, u64 *val)
{
unsigned offset = (long)_offset;
- u64 total = 0;
struct kvm *kvm;
+ *val = 0;
spin_lock(&kvm_lock);
list_for_each_entry(kvm, &vm_list, vm_list)
- total += *(u32 *)((void *)kvm + offset);
+ *val += *(u32 *)((void *)kvm + offset);
spin_unlock(&kvm_lock);
- return total;
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(vm_stat_fops, vm_stat_get, NULL, "%llu\n");
-static u64 vcpu_stat_get(void *_offset)
+static int vcpu_stat_get(void *_offset, u64 *val)
{
unsigned offset = (long)_offset;
- u64 total = 0;
struct kvm *kvm;
struct kvm_vcpu *vcpu;
int i;
+ *val = 0;
spin_lock(&kvm_lock);
list_for_each_entry(kvm, &vm_list, vm_list)
for (i = 0; i < KVM_MAX_VCPUS; ++i) {
vcpu = kvm->vcpus[i];
if (vcpu)
- total += *(u32 *)((void *)vcpu + offset);
+ *val += *(u32 *)((void *)vcpu + offset);
}
spin_unlock(&kvm_lock);
- return total;
+ return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(vcpu_stat_fops, vcpu_stat_get, NULL, "%llu\n");