[SCSI] qla2xxx: Refactor qla data structures
Following changes have been made to the qla2xxx FC driver in
preparation for the multi- queue and future SR IOV hardware.
1. scsi_qla_host structure has been changed to contain scsi host
specific data only.
2. A new structure, qla_hw_data is created to contain HBA specific
hardware data.
3. Request and response IO specific data strucures are created.
4. The global list of fcports for the hba is not maintained anymore,
instead a fcport list is construted on per scsi_qla_host.
Signed-of-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index b971940..edead28 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -185,7 +185,7 @@
* SCSI Request Block
*/
typedef struct srb {
- struct scsi_qla_host *ha; /* HA the SP is queued on */
+ struct scsi_qla_host *vha; /* HA the SP is queued on */
struct fc_port *fcport;
struct scsi_cmnd *cmd; /* Linux SCSI command pkt */
@@ -1524,7 +1524,7 @@
*/
typedef struct fc_port {
struct list_head list;
- struct scsi_qla_host *ha;
+ struct scsi_qla_host *vha;
uint8_t node_name[WWN_SIZE];
uint8_t port_name[WWN_SIZE];
@@ -1550,7 +1550,6 @@
unsigned long last_queue_full;
unsigned long last_ramp_up;
- struct list_head vp_fcport;
uint16_t vp_idx;
} fc_port_t;
@@ -2037,6 +2036,8 @@
#define VP_RET_CODE_NO_MEM 5
#define VP_RET_CODE_NOT_FOUND 6
+struct qla_hw_data;
+
/*
* ISP operations
*/
@@ -2055,8 +2056,8 @@
char * (*fw_version_str) (struct scsi_qla_host *, char *);
irq_handler_t intr_handler;
- void (*enable_intrs) (struct scsi_qla_host *);
- void (*disable_intrs) (struct scsi_qla_host *);
+ void (*enable_intrs) (struct qla_hw_data *);
+ void (*disable_intrs) (struct qla_hw_data *);
int (*abort_command) (struct scsi_qla_host *, srb_t *);
int (*target_reset) (struct fc_port *, unsigned int);
@@ -2089,6 +2090,7 @@
uint32_t);
int (*get_flash_version) (struct scsi_qla_host *, void *);
+ int (*start_scsi) (srb_t *);
};
/* MSI-X Support *************************************************************/
@@ -2160,208 +2162,108 @@
uint64_t output_bytes;
};
+/* Response queue data structure */
+struct rsp_que {
+ dma_addr_t dma;
+ response_t *ring;
+ response_t *ring_ptr;
+ uint16_t ring_index;
+ uint16_t out_ptr;
+ uint16_t length;
+ uint16_t options;
+ uint16_t msix_vector;
+ uint16_t rid;
+ struct qla_hw_data *hw;
+};
+
+/* Request queue data structure */
+struct req_que {
+ dma_addr_t dma;
+ request_t *ring;
+ request_t *ring_ptr;
+ uint16_t ring_index;
+ uint16_t in_ptr;
+ uint16_t cnt;
+ uint16_t length;
+ uint16_t options;
+ uint16_t rid;
+ uint16_t qos;
+ uint16_t vp_idx;
+ struct rsp_que *asso_que;
+ /* Outstandings ISP commands. */
+ srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS];
+ uint32_t current_outstanding_cmd;
+ int max_q_depth;
+};
+
/*
- * Linux Host Adapter structure
- */
-typedef struct scsi_qla_host {
- struct list_head list;
-
- /* Commonly used flags and state information. */
- struct Scsi_Host *host;
- struct pci_dev *pdev;
-
- unsigned long host_no;
+ * Qlogic host adapter specific data structure.
+*/
+struct qla_hw_data {
+ struct pci_dev *pdev;
+ /* SRB cache. */
+#define SRB_MIN_REQ 128
+ mempool_t *srb_mempool;
volatile struct {
- uint32_t init_done :1;
- uint32_t online :1;
uint32_t mbox_int :1;
uint32_t mbox_busy :1;
- uint32_t rscn_queue_overflow :1;
- uint32_t reset_active :1;
-
- uint32_t management_server_logged_in :1;
- uint32_t process_response_queue :1;
uint32_t disable_risc_code_load :1;
uint32_t enable_64bit_addressing :1;
uint32_t enable_lip_reset :1;
- uint32_t enable_lip_full_login :1;
uint32_t enable_target_reset :1;
+ uint32_t enable_lip_full_login :1;
uint32_t enable_led_scheme :1;
uint32_t inta_enabled :1;
uint32_t msi_enabled :1;
uint32_t msix_enabled :1;
uint32_t disable_serdes :1;
uint32_t gpsc_supported :1;
- uint32_t vsan_enabled :1;
+ uint32_t vsan_enabled :1;
uint32_t npiv_supported :1;
uint32_t fce_enabled :1;
- uint32_t hw_event_marker_found :1;
+ uint32_t hw_event_marker_found:1;
} flags;
- atomic_t loop_state;
-#define LOOP_TIMEOUT 1
-#define LOOP_DOWN 2
-#define LOOP_UP 3
-#define LOOP_UPDATE 4
-#define LOOP_READY 5
-#define LOOP_DEAD 6
-
- unsigned long dpc_flags;
-#define RESET_MARKER_NEEDED 0 /* Send marker to ISP. */
-#define RESET_ACTIVE 1
-#define ISP_ABORT_NEEDED 2 /* Initiate ISP abort. */
-#define ABORT_ISP_ACTIVE 3 /* ISP abort in progress. */
-#define LOOP_RESYNC_NEEDED 4 /* Device Resync needed. */
-#define LOOP_RESYNC_ACTIVE 5
-#define LOCAL_LOOP_UPDATE 6 /* Perform a local loop update. */
-#define RSCN_UPDATE 7 /* Perform an RSCN update. */
-#define MAILBOX_RETRY 8
-#define ISP_RESET_NEEDED 9 /* Initiate a ISP reset. */
-#define FAILOVER_EVENT_NEEDED 10
-#define FAILOVER_EVENT 11
-#define FAILOVER_NEEDED 12
-#define SCSI_RESTART_NEEDED 13 /* Processes SCSI retry queue. */
-#define PORT_RESTART_NEEDED 14 /* Processes Retry queue. */
-#define RESTART_QUEUES_NEEDED 15 /* Restarts the Lun queue. */
-#define ABORT_QUEUES_NEEDED 16
-#define RELOGIN_NEEDED 17
-#define LOGIN_RETRY_NEEDED 18 /* Initiate required fabric logins. */
-#define REGISTER_FC4_NEEDED 19 /* SNS FC4 registration required. */
-#define ISP_ABORT_RETRY 20 /* ISP aborted. */
-#define FCPORT_RESCAN_NEEDED 21 /* IO descriptor processing needed */
-#define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */
-#define IOCTL_ERROR_RECOVERY 23
-#define LOOP_RESET_NEEDED 24
-#define BEACON_BLINK_NEEDED 25
-#define REGISTER_FDMI_NEEDED 26
-#define FCPORT_UPDATE_NEEDED 27
-#define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */
-#define UNLOADING 29
-#define NPIV_CONFIG_NEEDED 30
-
- uint32_t device_flags;
-#define DFLG_LOCAL_DEVICES BIT_0
-#define DFLG_RETRY_LOCAL_DEVICES BIT_1
-#define DFLG_FABRIC_DEVICES BIT_2
-#define SWITCH_FOUND BIT_3
-#define DFLG_NO_CABLE BIT_4
-
-#define PCI_DEVICE_ID_QLOGIC_ISP2532 0x2532
-#define PCI_DEVICE_ID_QLOGIC_ISP8432 0x8432
- uint32_t device_type;
-#define DT_ISP2100 BIT_0
-#define DT_ISP2200 BIT_1
-#define DT_ISP2300 BIT_2
-#define DT_ISP2312 BIT_3
-#define DT_ISP2322 BIT_4
-#define DT_ISP6312 BIT_5
-#define DT_ISP6322 BIT_6
-#define DT_ISP2422 BIT_7
-#define DT_ISP2432 BIT_8
-#define DT_ISP5422 BIT_9
-#define DT_ISP5432 BIT_10
-#define DT_ISP2532 BIT_11
-#define DT_ISP8432 BIT_12
-#define DT_ISP_LAST (DT_ISP8432 << 1)
-
-#define DT_IIDMA BIT_26
-#define DT_FWI2 BIT_27
-#define DT_ZIO_SUPPORTED BIT_28
-#define DT_OEM_001 BIT_29
-#define DT_ISP2200A BIT_30
-#define DT_EXTENDED_IDS BIT_31
-
-#define DT_MASK(ha) ((ha)->device_type & (DT_ISP_LAST - 1))
-#define IS_QLA2100(ha) (DT_MASK(ha) & DT_ISP2100)
-#define IS_QLA2200(ha) (DT_MASK(ha) & DT_ISP2200)
-#define IS_QLA2300(ha) (DT_MASK(ha) & DT_ISP2300)
-#define IS_QLA2312(ha) (DT_MASK(ha) & DT_ISP2312)
-#define IS_QLA2322(ha) (DT_MASK(ha) & DT_ISP2322)
-#define IS_QLA6312(ha) (DT_MASK(ha) & DT_ISP6312)
-#define IS_QLA6322(ha) (DT_MASK(ha) & DT_ISP6322)
-#define IS_QLA2422(ha) (DT_MASK(ha) & DT_ISP2422)
-#define IS_QLA2432(ha) (DT_MASK(ha) & DT_ISP2432)
-#define IS_QLA5422(ha) (DT_MASK(ha) & DT_ISP5422)
-#define IS_QLA5432(ha) (DT_MASK(ha) & DT_ISP5432)
-#define IS_QLA2532(ha) (DT_MASK(ha) & DT_ISP2532)
-#define IS_QLA8432(ha) (DT_MASK(ha) & DT_ISP8432)
-
-#define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \
- IS_QLA6312(ha) || IS_QLA6322(ha))
-#define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha))
-#define IS_QLA54XX(ha) (IS_QLA5422(ha) || IS_QLA5432(ha))
-#define IS_QLA25XX(ha) (IS_QLA2532(ha))
-#define IS_QLA84XX(ha) (IS_QLA8432(ha))
-#define IS_QLA24XX_TYPE(ha) (IS_QLA24XX(ha) || IS_QLA54XX(ha) || \
- IS_QLA84XX(ha))
-
-#define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA)
-#define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2)
-#define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED)
-#define IS_OEM_001(ha) ((ha)->device_type & DT_OEM_001)
-#define HAS_EXTENDED_IDS(ha) ((ha)->device_type & DT_EXTENDED_IDS)
-
- /* SRB cache. */
-#define SRB_MIN_REQ 128
- mempool_t *srb_mempool;
-
/* This spinlock is used to protect "io transactions", you must
- * acquire it before doing any IO to the card, eg with RD_REG*() and
- * WRT_REG*() for the duration of your entire commandtransaction.
- *
- * This spinlock is of lower priority than the io request lock.
- */
+ * acquire it before doing any IO to the card, eg with RD_REG*() and
+ * WRT_REG*() for the duration of your entire commandtransaction.
+ *
+ * This spinlock is of lower priority than the io request lock.
+ */
- spinlock_t hardware_lock ____cacheline_aligned;
-
+ spinlock_t hardware_lock ____cacheline_aligned;
int bars;
int mem_only;
- device_reg_t __iomem *iobase; /* Base I/O address */
+ device_reg_t __iomem *iobase; /* Base I/O address */
resource_size_t pio_address;
-#define MIN_IOBASE_LEN 0x100
- /* ISP ring lock, rings, and indexes */
- dma_addr_t request_dma; /* Physical address. */
- request_t *request_ring; /* Base virtual address */
- request_t *request_ring_ptr; /* Current address. */
- uint16_t req_ring_index; /* Current index. */
- uint16_t req_q_cnt; /* Number of available entries. */
- uint16_t request_q_length;
+#define MIN_IOBASE_LEN 0x100
+ struct req_que *req;
+ struct rsp_que *rsp;
- dma_addr_t response_dma; /* Physical address. */
- response_t *response_ring; /* Base virtual address */
- response_t *response_ring_ptr; /* Current address. */
- uint16_t rsp_ring_index; /* Current index. */
- uint16_t response_q_length;
+ uint16_t switch_cap;
+#define FLOGI_SEQ_DEL BIT_8
+#define FLOGI_MID_SUPPORT BIT_10
+#define FLOGI_VSAN_SUPPORT BIT_12
+#define FLOGI_SP_SUPPORT BIT_13
+ /* Timeout timers. */
+ uint8_t loop_down_abort_time; /* port down timer */
+ atomic_t loop_down_timer; /* loop down timer */
+ uint8_t link_down_timeout; /* link down timeout */
+ uint16_t max_loop_id;
- struct isp_operations *isp_ops;
-
- /* Outstandings ISP commands. */
- srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS];
- uint32_t current_outstanding_cmd;
- srb_t *status_srb; /* Status continuation entry. */
-
- /* ISP configuration data. */
- uint16_t loop_id; /* Host adapter loop id */
- uint16_t switch_cap;
-#define FLOGI_SEQ_DEL BIT_8
-#define FLOGI_MID_SUPPORT BIT_10
-#define FLOGI_VSAN_SUPPORT BIT_12
-#define FLOGI_SP_SUPPORT BIT_13
uint16_t fb_rev;
-
- port_id_t d_id; /* Host adapter port id */
uint16_t max_public_loop_ids;
- uint16_t min_external_loopid; /* First external loop Id */
+ uint16_t min_external_loopid; /* First external loop Id */
#define PORT_SPEED_UNKNOWN 0xFFFF
-#define PORT_SPEED_1GB 0x00
-#define PORT_SPEED_2GB 0x01
-#define PORT_SPEED_4GB 0x03
-#define PORT_SPEED_8GB 0x04
- uint16_t link_data_rate; /* F/W operating speed */
+#define PORT_SPEED_1GB 0x00
+#define PORT_SPEED_2GB 0x01
+#define PORT_SPEED_4GB 0x03
+#define PORT_SPEED_8GB 0x04
+ uint16_t link_data_rate; /* F/W operating speed */
uint8_t current_topology;
uint8_t prev_topology;
@@ -2370,15 +2272,69 @@
#define ISP_CFG_FL 4
#define ISP_CFG_F 8
- uint8_t operating_mode; /* F/W operating mode */
+ uint8_t operating_mode; /* F/W operating mode */
#define LOOP 0
#define P2P 1
#define LOOP_P2P 2
#define P2P_LOOP 3
-
- uint8_t marker_needed;
-
uint8_t interrupts_on;
+ uint32_t isp_abort_cnt;
+
+#define PCI_DEVICE_ID_QLOGIC_ISP2532 0x2532
+#define PCI_DEVICE_ID_QLOGIC_ISP8432 0x8432
+ uint32_t device_type;
+#define DT_ISP2100 BIT_0
+#define DT_ISP2200 BIT_1
+#define DT_ISP2300 BIT_2
+#define DT_ISP2312 BIT_3
+#define DT_ISP2322 BIT_4
+#define DT_ISP6312 BIT_5
+#define DT_ISP6322 BIT_6
+#define DT_ISP2422 BIT_7
+#define DT_ISP2432 BIT_8
+#define DT_ISP5422 BIT_9
+#define DT_ISP5432 BIT_10
+#define DT_ISP2532 BIT_11
+#define DT_ISP8432 BIT_12
+#define DT_ISP_LAST (DT_ISP8432 << 1)
+
+#define DT_IIDMA BIT_26
+#define DT_FWI2 BIT_27
+#define DT_ZIO_SUPPORTED BIT_28
+#define DT_OEM_001 BIT_29
+#define DT_ISP2200A BIT_30
+#define DT_EXTENDED_IDS BIT_31
+#define DT_MASK(ha) ((ha)->device_type & (DT_ISP_LAST - 1))
+#define IS_QLA2100(ha) (DT_MASK(ha) & DT_ISP2100)
+#define IS_QLA2200(ha) (DT_MASK(ha) & DT_ISP2200)
+#define IS_QLA2300(ha) (DT_MASK(ha) & DT_ISP2300)
+#define IS_QLA2312(ha) (DT_MASK(ha) & DT_ISP2312)
+#define IS_QLA2322(ha) (DT_MASK(ha) & DT_ISP2322)
+#define IS_QLA6312(ha) (DT_MASK(ha) & DT_ISP6312)
+#define IS_QLA6322(ha) (DT_MASK(ha) & DT_ISP6322)
+#define IS_QLA2422(ha) (DT_MASK(ha) & DT_ISP2422)
+#define IS_QLA2432(ha) (DT_MASK(ha) & DT_ISP2432)
+#define IS_QLA5422(ha) (DT_MASK(ha) & DT_ISP5422)
+#define IS_QLA5432(ha) (DT_MASK(ha) & DT_ISP5432)
+#define IS_QLA2532(ha) (DT_MASK(ha) & DT_ISP2532)
+#define IS_QLA8432(ha) (DT_MASK(ha) & DT_ISP8432)
+
+#define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \
+ IS_QLA6312(ha) || IS_QLA6322(ha))
+#define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha))
+#define IS_QLA54XX(ha) (IS_QLA5422(ha) || IS_QLA5432(ha))
+#define IS_QLA25XX(ha) (IS_QLA2532(ha))
+#define IS_QLA84XX(ha) (IS_QLA8432(ha))
+#define IS_QLA24XX_TYPE(ha) (IS_QLA24XX(ha) || IS_QLA54XX(ha) || \
+ IS_QLA84XX(ha))
+#define IS_QLA2XXX_MIDTYPE(ha) (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \
+ IS_QLA25XX(ha))
+
+#define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA)
+#define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2)
+#define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED)
+#define IS_OEM_001(ha) ((ha)->device_type & DT_OEM_001)
+#define HAS_EXTENDED_IDS(ha) ((ha)->device_type & DT_EXTENDED_IDS)
/* HBA serial number */
uint8_t serial0;
@@ -2386,8 +2342,8 @@
uint8_t serial2;
/* NVRAM configuration data */
-#define MAX_NVRAM_SIZE 4096
-#define VPD_OFFSET MAX_NVRAM_SIZE / 2
+#define MAX_NVRAM_SIZE 4096
+#define VPD_OFFSET MAX_NVRAM_SIZE / 2
uint16_t nvram_size;
uint16_t nvram_base;
void *nvram;
@@ -2401,22 +2357,8 @@
uint16_t r_a_tov;
int port_down_retry_count;
uint8_t mbx_count;
- uint16_t last_loop_id;
- uint16_t mgmt_svr_loop_id;
- uint32_t login_retry_count;
- int max_q_depth;
-
- struct list_head work_list;
-
- /* Fibre Channel Device List. */
- struct list_head fcports;
-
- /* RSCN queue. */
- uint32_t rscn_queue[MAX_RSCN_COUNT];
- uint8_t rscn_in_ptr;
- uint8_t rscn_out_ptr;
-
+ uint32_t login_retry_count;
/* SNS command interfaces. */
ms_iocb_entry_t *ms_iocb;
dma_addr_t ms_iocb_dma;
@@ -2426,28 +2368,20 @@
struct sns_cmd_pkt *sns_cmd;
dma_addr_t sns_cmd_dma;
-#define SFP_DEV_SIZE 256
-#define SFP_BLOCK_SIZE 64
- void *sfp_data;
- dma_addr_t sfp_data_dma;
+#define SFP_DEV_SIZE 256
+#define SFP_BLOCK_SIZE 64
+ void *sfp_data;
+ dma_addr_t sfp_data_dma;
struct task_struct *dpc_thread;
uint8_t dpc_active; /* DPC routine is active */
- /* Timeout timers. */
- uint8_t loop_down_abort_time; /* port down timer */
- atomic_t loop_down_timer; /* loop down timer */
- uint8_t link_down_timeout; /* link down timeout */
-
- uint32_t timer_active;
- struct timer_list timer;
-
dma_addr_t gid_list_dma;
struct gid_list_info *gid_list;
int gid_list_info_size;
/* Small DMA pool allocations -- maximum 256 bytes in length. */
-#define DMA_POOL_SIZE 256
+#define DMA_POOL_SIZE 256
struct dma_pool *s_dma_pool;
dma_addr_t init_cb_dma;
@@ -2459,17 +2393,17 @@
mbx_cmd_t *mcp;
unsigned long mbx_cmd_flags;
-#define MBX_INTERRUPT 1
-#define MBX_INTR_WAIT 2
+#define MBX_INTERRUPT 1
+#define MBX_INTR_WAIT 2
#define MBX_UPDATE_FLASH_ACTIVE 3
- struct mutex vport_lock; /* Virtual port synchronization */
- struct completion mbx_cmd_comp; /* Serialize mbx access */
+ struct mutex vport_lock; /* Virtual port synchronization */
+ struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
uint32_t mbx_flags;
#define MBX_IN_PROGRESS BIT_0
-#define MBX_BUSY BIT_1 /* Got the Access */
+#define MBX_BUSY BIT_1 /* Got the Access */
#define MBX_SLEEPING_ON_SEM BIT_2
#define MBX_POLLING_FOR_COMP BIT_3
#define MBX_COMPLETED BIT_4
@@ -2488,7 +2422,7 @@
#define RISC_START_ADDRESS_2300 0x800
#define RISC_START_ADDRESS_2400 0x100000
- uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */
+ uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */
uint8_t fw_seriallink_options[4];
uint16_t fw_seriallink_options24[4];
@@ -2509,10 +2443,10 @@
uint64_t fce_wr, fce_rd;
struct mutex fce_mutex;
+ uint32_t hw_event_start;
uint32_t hw_event_ptr;
uint32_t hw_event_pause_errors;
- uint8_t host_str[16];
uint32_t pci_attr;
uint16_t chip_revision;
@@ -2523,11 +2457,6 @@
char model_desc[80];
uint8_t adapter_id[16+1];
- uint8_t *node_name;
- uint8_t *port_name;
- uint8_t fabric_node_name[WWN_SIZE];
- uint32_t isp_abort_cnt;
-
/* Option ROM information. */
char *optrom_buffer;
uint32_t optrom_size;
@@ -2538,13 +2467,13 @@
uint32_t optrom_region_start;
uint32_t optrom_region_size;
- /* PCI expansion ROM image information. */
+/* PCI expansion ROM image information. */
#define ROM_CODE_TYPE_BIOS 0
#define ROM_CODE_TYPE_FCODE 1
#define ROM_CODE_TYPE_EFI 3
- uint8_t bios_revision[2];
- uint8_t efi_revision[2];
- uint8_t fcode_revision[16];
+ uint8_t bios_revision[2];
+ uint8_t efi_revision[2];
+ uint8_t fcode_revision[16];
uint32_t fw_revision[4];
uint32_t fdt_wrt_disable;
@@ -2553,39 +2482,145 @@
uint32_t fdt_unprotect_sec_cmd;
uint32_t fdt_protect_sec_cmd;
- uint32_t flt_region_flt;
- uint32_t flt_region_fdt;
- uint32_t flt_region_boot;
- uint32_t flt_region_fw;
- uint32_t flt_region_vpd_nvram;
- uint32_t flt_region_hw_event;
- uint32_t flt_region_npiv_conf;
+ uint32_t flt_region_flt;
+ uint32_t flt_region_fdt;
+ uint32_t flt_region_boot;
+ uint32_t flt_region_fw;
+ uint32_t flt_region_vpd_nvram;
+ uint32_t flt_region_hw_event;
+ uint32_t flt_region_npiv_conf;
/* Needed for BEACON */
- uint16_t beacon_blink_led;
- uint8_t beacon_color_state;
+ uint16_t beacon_blink_led;
+ uint8_t beacon_color_state;
#define QLA_LED_GRN_ON 0x01
#define QLA_LED_YLW_ON 0x02
#define QLA_LED_ABR_ON 0x04
#define QLA_LED_ALL_ON 0x07 /* yellow, green, amber. */
/* ISP2322: red, green, amber. */
-
- uint16_t zio_mode;
- uint16_t zio_timer;
+ uint16_t zio_mode;
+ uint16_t zio_timer;
struct fc_host_statistics fc_host_stat;
struct qla_msix_entry msix_entries[QLA_MSIX_ENTRIES];
- struct list_head vp_list; /* list of VP */
+ struct list_head vp_list; /* list of VP */
+ unsigned long vp_idx_map[(MAX_MULTI_ID_FABRIC / 8) /
+ sizeof(unsigned long)];
+ uint16_t num_vhosts; /* number of vports created */
+ uint16_t num_vsans; /* number of vsan created */
+ uint16_t max_npiv_vports; /* 63 or 125 per topoloty */
+ int cur_vport_count;
+
+ struct qla_chip_state_84xx *cs84xx;
+ struct qla_statistics qla_stats;
+ struct isp_operations *isp_ops;
+};
+
+/*
+ * Qlogic scsi host structure
+ */
+typedef struct scsi_qla_host {
+ struct list_head list;
+ struct list_head vp_fcports; /* list of fcports */
+ struct list_head work_list;
+
+ /* Commonly used flags and state information. */
+ struct Scsi_Host *host;
+ unsigned long host_no;
+ uint8_t host_str[16];
+
+ volatile struct {
+ uint32_t init_done :1;
+ uint32_t online :1;
+ uint32_t rscn_queue_overflow :1;
+ uint32_t reset_active :1;
+
+ uint32_t management_server_logged_in :1;
+ uint32_t process_response_queue :1;
+ } flags;
+
+ atomic_t loop_state;
+#define LOOP_TIMEOUT 1
+#define LOOP_DOWN 2
+#define LOOP_UP 3
+#define LOOP_UPDATE 4
+#define LOOP_READY 5
+#define LOOP_DEAD 6
+
+ unsigned long dpc_flags;
+#define RESET_MARKER_NEEDED 0 /* Send marker to ISP. */
+#define RESET_ACTIVE 1
+#define ISP_ABORT_NEEDED 2 /* Initiate ISP abort. */
+#define ABORT_ISP_ACTIVE 3 /* ISP abort in progress. */
+#define LOOP_RESYNC_NEEDED 4 /* Device Resync needed. */
+#define LOOP_RESYNC_ACTIVE 5
+#define LOCAL_LOOP_UPDATE 6 /* Perform a local loop update. */
+#define RSCN_UPDATE 7 /* Perform an RSCN update. */
+#define MAILBOX_RETRY 8
+#define ISP_RESET_NEEDED 9 /* Initiate a ISP reset. */
+#define FAILOVER_EVENT_NEEDED 10
+#define FAILOVER_EVENT 11
+#define FAILOVER_NEEDED 12
+#define SCSI_RESTART_NEEDED 13 /* Processes SCSI retry queue. */
+#define PORT_RESTART_NEEDED 14 /* Processes Retry queue. */
+#define RESTART_QUEUES_NEEDED 15 /* Restarts the Lun queue. */
+#define ABORT_QUEUES_NEEDED 16
+#define RELOGIN_NEEDED 17
+#define LOGIN_RETRY_NEEDED 18 /* Initiate required fabric logins. */
+#define REGISTER_FC4_NEEDED 19 /* SNS FC4 registration required. */
+#define ISP_ABORT_RETRY 20 /* ISP aborted. */
+#define FCPORT_RESCAN_NEEDED 21 /* IO descriptor processing needed */
+#define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */
+#define IOCTL_ERROR_RECOVERY 23
+#define LOOP_RESET_NEEDED 24
+#define BEACON_BLINK_NEEDED 25
+#define REGISTER_FDMI_NEEDED 26
+#define FCPORT_UPDATE_NEEDED 27
+#define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */
+#define UNLOADING 29
+#define NPIV_CONFIG_NEEDED 30
+
+ uint32_t device_flags;
+#define DFLG_LOCAL_DEVICES BIT_0
+#define DFLG_RETRY_LOCAL_DEVICES BIT_1
+#define DFLG_FABRIC_DEVICES BIT_2
+#define SWITCH_FOUND BIT_3
+#define DFLG_NO_CABLE BIT_4
+
+ srb_t *status_srb; /* Status continuation entry. */
+
+ /* ISP configuration data. */
+ uint16_t loop_id; /* Host adapter loop id */
+
+ port_id_t d_id; /* Host adapter port id */
+ uint8_t marker_needed;
+ uint16_t mgmt_svr_loop_id;
+
+
+
+ /* RSCN queue. */
+ uint32_t rscn_queue[MAX_RSCN_COUNT];
+ uint8_t rscn_in_ptr;
+ uint8_t rscn_out_ptr;
+
+ /* Timeout timers. */
+ uint8_t loop_down_abort_time; /* port down timer */
+ atomic_t loop_down_timer; /* loop down timer */
+ uint8_t link_down_timeout; /* link down timeout */
+
+ uint32_t timer_active;
+ struct timer_list timer;
+
+ uint8_t node_name[WWN_SIZE];
+ uint8_t port_name[WWN_SIZE];
+ uint8_t fabric_node_name[WWN_SIZE];
+ uint32_t vp_abort_cnt;
+
struct fc_vport *fc_vport; /* holds fc_vport * for each vport */
- unsigned long vp_idx_map[(MAX_MULTI_ID_FABRIC / 8) / sizeof(unsigned long)];
- uint16_t num_vhosts; /* number of vports created */
- uint16_t num_vsans; /* number of vsan created */
uint16_t vp_idx; /* vport ID */
- struct scsi_qla_host *parent; /* holds pport */
unsigned long vp_flags;
- struct list_head vp_fcports; /* list of fcports */
#define VP_IDX_ACQUIRED 0 /* bit no 0 */
#define VP_CREATE_NEEDED 1
#define VP_BIND_NEEDED 2
@@ -2604,11 +2639,7 @@
#define VP_ERR_FAB_NORESOURCES 3
#define VP_ERR_FAB_LOGOUT 4
#define VP_ERR_ADAP_NORESOURCES 5
- uint16_t max_npiv_vports; /* 63 or 125 per topoloty */
- int cur_vport_count;
-
- struct qla_chip_state_84xx *cs84xx;
- struct qla_statistics qla_stats;
+ struct qla_hw_data *hw;
} scsi_qla_host_t;