sc1200: remove pointless hwif lookup loop
Save PCI regs values for both IDE ports in one buffer, in order to eliminate
a needless and ugly loop across all hwifs, searching for our PCI device.
Partially based on the previous patch by Jeff Garzik.
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 707d5ff..f0029b3 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -260,66 +260,39 @@
}
#ifdef CONFIG_PM
-static ide_hwif_t *lookup_pci_dev (ide_hwif_t *prev, struct pci_dev *dev)
-{
- int h;
-
- for (h = 0; h < MAX_HWIFS; h++) {
- ide_hwif_t *hwif = &ide_hwifs[h];
- if (prev) {
- if (hwif == prev)
- prev = NULL; // found previous, now look for next match
- } else {
- if (hwif && hwif->pci_dev == dev)
- return hwif; // found next match
- }
- }
- return NULL; // not found
-}
-
-typedef struct sc1200_saved_state_s {
- __u32 regs[4];
-} sc1200_saved_state_t;
-
+struct sc1200_saved_state {
+ u32 regs[8];
+};
static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
{
- ide_hwif_t *hwif = NULL;
-
printk("SC1200: suspend(%u)\n", state.event);
+ /*
+ * we only save state when going from full power to less
+ */
if (state.event == PM_EVENT_ON) {
- // we only save state when going from full power to less
+ struct sc1200_saved_state *ss;
+ unsigned int r;
- //
- // Loop over all interfaces that are part of this PCI device:
- //
- while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
- sc1200_saved_state_t *ss;
- unsigned int basereg, r;
- //
- // allocate a permanent save area, if not already allocated
- //
- ss = (sc1200_saved_state_t *)hwif->config_data;
- if (ss == NULL) {
- ss = kmalloc(sizeof(sc1200_saved_state_t), GFP_KERNEL);
- if (ss == NULL)
- return -ENOMEM;
- hwif->config_data = (unsigned long)ss;
- }
- ss = (sc1200_saved_state_t *)hwif->config_data;
- //
- // Save timing registers: this may be unnecessary if
- // BIOS also does it
- //
- basereg = hwif->channel ? 0x50 : 0x40;
- for (r = 0; r < 4; ++r) {
- pci_read_config_dword (hwif->pci_dev, basereg + (r<<2), &ss->regs[r]);
- }
+ /*
+ * allocate a permanent save area, if not already allocated
+ */
+ ss = (struct sc1200_saved_state *)pci_get_drvdata(dev);
+ if (ss == NULL) {
+ ss = kmalloc(sizeof(*ss), GFP_KERNEL);
+ if (ss == NULL)
+ return -ENOMEM;
+ pci_set_drvdata(dev, ss);
}
- }
- /* You don't need to iterate over disks -- sysfs should have done that for you already */
+ /*
+ * save timing registers
+ * (this may be unnecessary if BIOS also does it)
+ */
+ for (r = 0; r < 8; r++)
+ pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
+ }
pci_disable_device(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
@@ -328,30 +301,25 @@
static int sc1200_resume (struct pci_dev *dev)
{
- ide_hwif_t *hwif = NULL;
- int i;
+ struct sc1200_saved_state *ss;
+ unsigned int r;
+ int i;
i = pci_enable_device(dev);
if (i)
return i;
- //
- // loop over all interfaces that are part of this pci device:
- //
- while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) {
- unsigned int basereg, r;
- sc1200_saved_state_t *ss = (sc1200_saved_state_t *)hwif->config_data;
+ ss = (struct sc1200_saved_state *)pci_get_drvdata(dev);
- //
- // Restore timing registers: this may be unnecessary if BIOS also does it
- //
- basereg = hwif->channel ? 0x50 : 0x40;
- if (ss != NULL) {
- for (r = 0; r < 4; ++r) {
- pci_write_config_dword(hwif->pci_dev, basereg + (r<<2), ss->regs[r]);
- }
- }
+ /*
+ * restore timing registers
+ * (this may be unnecessary if BIOS also does it)
+ */
+ if (ss) {
+ for (r = 0; r < 8; r++)
+ pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]);
}
+
return 0;
}
#endif