| /* |
| * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC |
| * |
| * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| * |
| * Licensed under GPLv2 only. |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <dt-bindings/pinctrl/at91.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/clock/at91.h> |
| |
| / { |
| model = "Atmel AT91SAM9263 family SoC"; |
| compatible = "atmel,at91sam9263"; |
| interrupt-parent = <&aic>; |
| |
| aliases { |
| serial0 = &dbgu; |
| serial1 = &usart0; |
| serial2 = &usart1; |
| serial3 = &usart2; |
| gpio0 = &pioA; |
| gpio1 = &pioB; |
| gpio2 = &pioC; |
| gpio3 = &pioD; |
| gpio4 = &pioE; |
| tcb0 = &tcb0; |
| i2c0 = &i2c0; |
| ssc0 = &ssc0; |
| ssc1 = &ssc1; |
| pwm0 = &pwm0; |
| }; |
| |
| cpus { |
| #address-cells = <0>; |
| #size-cells = <0>; |
| |
| cpu { |
| compatible = "arm,arm926ej-s"; |
| device_type = "cpu"; |
| }; |
| }; |
| |
| memory { |
| reg = <0x20000000 0x08000000>; |
| }; |
| |
| clocks { |
| main_xtal: main_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| |
| slow_xtal: slow_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| ahb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| apb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| aic: interrupt-controller@fffff000 { |
| #interrupt-cells = <3>; |
| compatible = "atmel,at91rm9200-aic"; |
| interrupt-controller; |
| reg = <0xfffff000 0x200>; |
| atmel,external-irqs = <30 31>; |
| }; |
| |
| pmc: pmc@fffffc00 { |
| compatible = "atmel,at91rm9200-pmc"; |
| reg = <0xfffffc00 0x100>; |
| interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| interrupt-controller; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #interrupt-cells = <1>; |
| |
| main_osc: main_osc { |
| compatible = "atmel,at91rm9200-clk-main-osc"; |
| #clock-cells = <0>; |
| interrupts-extended = <&pmc AT91_PMC_MOSCS>; |
| clocks = <&main_xtal>; |
| }; |
| |
| main: mainck { |
| compatible = "atmel,at91rm9200-clk-main"; |
| #clock-cells = <0>; |
| clocks = <&main_osc>; |
| }; |
| |
| plla: pllack { |
| compatible = "atmel,at91rm9200-clk-pll"; |
| #clock-cells = <0>; |
| interrupts-extended = <&pmc AT91_PMC_LOCKA>; |
| clocks = <&main>; |
| reg = <0>; |
| atmel,clk-input-range = <1000000 32000000>; |
| #atmel,pll-clk-output-range-cells = <4>; |
| atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, |
| <190000000 240000000 2 1>; |
| }; |
| |
| pllb: pllbck { |
| compatible = "atmel,at91rm9200-clk-pll"; |
| #clock-cells = <0>; |
| interrupts-extended = <&pmc AT91_PMC_LOCKB>; |
| clocks = <&main>; |
| reg = <1>; |
| atmel,clk-input-range = <1000000 32000000>; |
| #atmel,pll-clk-output-range-cells = <4>; |
| atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, |
| <190000000 240000000 2 1>; |
| }; |
| |
| mck: masterck { |
| compatible = "atmel,at91rm9200-clk-master"; |
| #clock-cells = <0>; |
| interrupts-extended = <&pmc AT91_PMC_MCKRDY>; |
| clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; |
| atmel,clk-output-range = <0 120000000>; |
| atmel,clk-divisors = <1 2 4 0>; |
| }; |
| |
| usb: usbck { |
| compatible = "atmel,at91rm9200-clk-usb"; |
| #clock-cells = <0>; |
| atmel,clk-divisors = <1 2 4 0>; |
| clocks = <&pllb>; |
| }; |
| |
| prog: progck { |
| compatible = "atmel,at91rm9200-clk-programmable"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <&pmc>; |
| clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; |
| |
| prog0: prog0 { |
| #clock-cells = <0>; |
| reg = <0>; |
| interrupts = <AT91_PMC_PCKRDY(0)>; |
| }; |
| |
| prog1: prog1 { |
| #clock-cells = <0>; |
| reg = <1>; |
| interrupts = <AT91_PMC_PCKRDY(1)>; |
| }; |
| |
| prog2: prog2 { |
| #clock-cells = <0>; |
| reg = <2>; |
| interrupts = <AT91_PMC_PCKRDY(2)>; |
| }; |
| |
| prog3: prog3 { |
| #clock-cells = <0>; |
| reg = <3>; |
| interrupts = <AT91_PMC_PCKRDY(3)>; |
| }; |
| }; |
| |
| systemck { |
| compatible = "atmel,at91rm9200-clk-system"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| uhpck: uhpck { |
| #clock-cells = <0>; |
| reg = <6>; |
| clocks = <&usb>; |
| }; |
| |
| udpck: udpck { |
| #clock-cells = <0>; |
| reg = <7>; |
| clocks = <&usb>; |
| }; |
| |
| pck0: pck0 { |
| #clock-cells = <0>; |
| reg = <8>; |
| clocks = <&prog0>; |
| }; |
| |
| pck1: pck1 { |
| #clock-cells = <0>; |
| reg = <9>; |
| clocks = <&prog1>; |
| }; |
| |
| pck2: pck2 { |
| #clock-cells = <0>; |
| reg = <10>; |
| clocks = <&prog2>; |
| }; |
| |
| pck3: pck3 { |
| #clock-cells = <0>; |
| reg = <11>; |
| clocks = <&prog3>; |
| }; |
| }; |
| |
| periphck { |
| compatible = "atmel,at91rm9200-clk-peripheral"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&mck>; |
| |
| pioA_clk: pioA_clk { |
| #clock-cells = <0>; |
| reg = <2>; |
| }; |
| |
| pioB_clk: pioB_clk { |
| #clock-cells = <0>; |
| reg = <3>; |
| }; |
| |
| pioCDE_clk: pioCDE_clk { |
| #clock-cells = <0>; |
| reg = <4>; |
| }; |
| |
| usart0_clk: usart0_clk { |
| #clock-cells = <0>; |
| reg = <7>; |
| }; |
| |
| usart1_clk: usart1_clk { |
| #clock-cells = <0>; |
| reg = <8>; |
| }; |
| |
| usart2_clk: usart2_clk { |
| #clock-cells = <0>; |
| reg = <9>; |
| }; |
| |
| mci0_clk: mci0_clk { |
| #clock-cells = <0>; |
| reg = <10>; |
| }; |
| |
| mci1_clk: mci1_clk { |
| #clock-cells = <0>; |
| reg = <11>; |
| }; |
| |
| can_clk: can_clk { |
| #clock-cells = <0>; |
| reg = <12>; |
| }; |
| |
| twi0_clk: twi0_clk { |
| #clock-cells = <0>; |
| reg = <13>; |
| }; |
| |
| spi0_clk: spi0_clk { |
| #clock-cells = <0>; |
| reg = <14>; |
| }; |
| |
| spi1_clk: spi1_clk { |
| #clock-cells = <0>; |
| reg = <15>; |
| }; |
| |
| ssc0_clk: ssc0_clk { |
| #clock-cells = <0>; |
| reg = <16>; |
| }; |
| |
| ssc1_clk: ssc1_clk { |
| #clock-cells = <0>; |
| reg = <17>; |
| }; |
| |
| ac91_clk: ac97_clk { |
| #clock-cells = <0>; |
| reg = <18>; |
| }; |
| |
| tcb_clk: tcb_clk { |
| #clock-cells = <0>; |
| reg = <19>; |
| }; |
| |
| pwm_clk: pwm_clk { |
| #clock-cells = <0>; |
| reg = <20>; |
| }; |
| |
| macb0_clk: macb0_clk { |
| #clock-cells = <0>; |
| reg = <21>; |
| }; |
| |
| g2de_clk: g2de_clk { |
| #clock-cells = <0>; |
| reg = <23>; |
| }; |
| |
| udc_clk: udc_clk { |
| #clock-cells = <0>; |
| reg = <24>; |
| }; |
| |
| isi_clk: isi_clk { |
| #clock-cells = <0>; |
| reg = <25>; |
| }; |
| |
| lcd_clk: lcd_clk { |
| #clock-cells = <0>; |
| reg = <26>; |
| }; |
| |
| dma_clk: dma_clk { |
| #clock-cells = <0>; |
| reg = <27>; |
| }; |
| |
| ohci_clk: ohci_clk { |
| #clock-cells = <0>; |
| reg = <29>; |
| }; |
| }; |
| }; |
| |
| ramc0: ramc@ffffe200 { |
| compatible = "atmel,at91sam9260-sdramc"; |
| reg = <0xffffe200 0x200>; |
| }; |
| |
| ramc1: ramc@ffffe800 { |
| compatible = "atmel,at91sam9260-sdramc"; |
| reg = <0xffffe800 0x200>; |
| }; |
| |
| pit: timer@fffffd30 { |
| compatible = "atmel,at91sam9260-pit"; |
| reg = <0xfffffd30 0xf>; |
| interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&mck>; |
| }; |
| |
| tcb0: timer@fff7c000 { |
| compatible = "atmel,at91rm9200-tcb"; |
| reg = <0xfff7c000 0x100>; |
| interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&tcb_clk>; |
| clock-names = "t0_clk"; |
| }; |
| |
| rstc@fffffd00 { |
| compatible = "atmel,at91sam9260-rstc"; |
| reg = <0xfffffd00 0x10>; |
| }; |
| |
| shdwc@fffffd10 { |
| compatible = "atmel,at91sam9260-shdwc"; |
| reg = <0xfffffd10 0x10>; |
| }; |
| |
| pinctrl@fffff200 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; |
| ranges = <0xfffff200 0xfffff200 0xa00>; |
| |
| atmel,mux-mask = < |
| /* A B */ |
| 0xfffffffb 0xffffe07f /* pioA */ |
| 0x0007ffff 0x39072fff /* pioB */ |
| 0xffffffff 0x3ffffff8 /* pioC */ |
| 0xfffffbff 0xffffffff /* pioD */ |
| 0xffe00fff 0xfbfcff00 /* pioE */ |
| >; |
| |
| /* shared pinctrl settings */ |
| dbgu { |
| pinctrl_dbgu: dbgu-0 { |
| atmel,pins = |
| <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC30 periph A */ |
| AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC31 periph with pullup */ |
| }; |
| }; |
| |
| usart0 { |
| pinctrl_usart0: usart0-0 { |
| atmel,pins = |
| <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA26 periph A with pullup */ |
| AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ |
| }; |
| |
| pinctrl_usart0_rts: usart0_rts-0 { |
| atmel,pins = |
| <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA28 periph A */ |
| }; |
| |
| pinctrl_usart0_cts: usart0_cts-0 { |
| atmel,pins = |
| <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA29 periph A */ |
| }; |
| }; |
| |
| usart1 { |
| pinctrl_usart1: usart1-0 { |
| atmel,pins = |
| <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A with pullup */ |
| AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD1 periph A */ |
| }; |
| |
| pinctrl_usart1_rts: usart1_rts-0 { |
| atmel,pins = |
| <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD7 periph B */ |
| }; |
| |
| pinctrl_usart1_cts: usart1_cts-0 { |
| atmel,pins = |
| <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD8 periph B */ |
| }; |
| }; |
| |
| usart2 { |
| pinctrl_usart2: usart2-0 { |
| atmel,pins = |
| <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A with pullup */ |
| AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD3 periph A */ |
| }; |
| |
| pinctrl_usart2_rts: usart2_rts-0 { |
| atmel,pins = |
| <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD5 periph B */ |
| }; |
| |
| pinctrl_usart2_cts: usart2_cts-0 { |
| atmel,pins = |
| <AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD6 periph B */ |
| }; |
| }; |
| |
| nand { |
| pinctrl_nand: nand-0 { |
| atmel,pins = |
| <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA22 gpio RDY pin pull_up*/ |
| AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD15 gpio enable pin pull_up */ |
| }; |
| }; |
| |
| macb { |
| pinctrl_macb_rmii: macb_rmii-0 { |
| atmel,pins = |
| <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ |
| AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */ |
| AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */ |
| AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */ |
| AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */ |
| AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */ |
| AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */ |
| AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */ |
| AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */ |
| AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ |
| }; |
| |
| pinctrl_macb_rmii_mii: macb_rmii_mii-0 { |
| atmel,pins = |
| <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ |
| AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ |
| AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC22 periph B */ |
| AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC23 periph B */ |
| AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC24 periph B */ |
| AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC25 periph B */ |
| AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ |
| AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE22 periph B */ |
| }; |
| }; |
| |
| mmc0 { |
| pinctrl_mmc0_clk: mmc0_clk-0 { |
| atmel,pins = |
| <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA12 periph A */ |
| }; |
| |
| pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { |
| atmel,pins = |
| <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */ |
| AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA0 periph A with pullup */ |
| }; |
| |
| pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { |
| atmel,pins = |
| <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */ |
| AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */ |
| AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA5 periph A with pullup */ |
| }; |
| |
| pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { |
| atmel,pins = |
| <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ |
| AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA17 periph A with pullup */ |
| }; |
| |
| pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { |
| atmel,pins = |
| <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ |
| AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ |
| AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ |
| }; |
| }; |
| |
| mmc1 { |
| pinctrl_mmc1_clk: mmc1_clk-0 { |
| atmel,pins = |
| <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ |
| }; |
| |
| pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { |
| atmel,pins = |
| <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ |
| AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA8 periph A with pullup */ |
| }; |
| |
| pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { |
| atmel,pins = |
| <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */ |
| AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA10 periph A with pullup */ |
| AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA11 periph A with pullup */ |
| }; |
| |
| pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { |
| atmel,pins = |
| <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA21 periph A with pullup */ |
| AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA22 periph A with pullup */ |
| }; |
| |
| pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { |
| atmel,pins = |
| <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA23 periph A with pullup */ |
| AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA24 periph A with pullup */ |
| AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA25 periph A with pullup */ |
| }; |
| }; |
| |
| ssc0 { |
| pinctrl_ssc0_tx: ssc0_tx-0 { |
| atmel,pins = |
| <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB0 periph B */ |
| AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB1 periph B */ |
| AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ |
| }; |
| |
| pinctrl_ssc0_rx: ssc0_rx-0 { |
| atmel,pins = |
| <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B */ |
| AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B */ |
| AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B */ |
| }; |
| }; |
| |
| ssc1 { |
| pinctrl_ssc1_tx: ssc1_tx-0 { |
| atmel,pins = |
| <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ |
| AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ |
| AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ |
| }; |
| |
| pinctrl_ssc1_rx: ssc1_rx-0 { |
| atmel,pins = |
| <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ |
| AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A */ |
| AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ |
| }; |
| }; |
| |
| spi0 { |
| pinctrl_spi0: spi0-0 { |
| atmel,pins = |
| <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA0 periph B SPI0_MISO pin */ |
| AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA1 periph B SPI0_MOSI pin */ |
| AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA2 periph B SPI0_SPCK pin */ |
| }; |
| }; |
| |
| spi1 { |
| pinctrl_spi1: spi1-0 { |
| atmel,pins = |
| <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A SPI1_MISO pin */ |
| AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A SPI1_MOSI pin */ |
| AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A SPI1_SPCK pin */ |
| }; |
| }; |
| |
| tcb0 { |
| pinctrl_tcb0_tclk0: tcb0_tclk0-0 { |
| atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| }; |
| |
| pinctrl_tcb0_tclk1: tcb0_tclk1-0 { |
| atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| }; |
| |
| pinctrl_tcb0_tclk2: tcb0_tclk2-0 { |
| atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| }; |
| |
| pinctrl_tcb0_tioa0: tcb0_tioa0-0 { |
| atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| }; |
| |
| pinctrl_tcb0_tioa1: tcb0_tioa1-0 { |
| atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| }; |
| |
| pinctrl_tcb0_tioa2: tcb0_tioa2-0 { |
| atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| }; |
| |
| pinctrl_tcb0_tiob0: tcb0_tiob0-0 { |
| atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| }; |
| |
| pinctrl_tcb0_tiob1: tcb0_tiob1-0 { |
| atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| }; |
| |
| pinctrl_tcb0_tiob2: tcb0_tiob2-0 { |
| atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| }; |
| }; |
| |
| fb { |
| pinctrl_fb: fb-0 { |
| atmel,pins = |
| <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A */ |
| AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A */ |
| AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A */ |
| AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB9 periph B */ |
| AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A */ |
| AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A */ |
| AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A */ |
| AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 periph A */ |
| AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 periph A */ |
| AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A */ |
| AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A */ |
| AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A */ |
| AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A */ |
| AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC12 periph B */ |
| AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC18 periph A */ |
| AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A */ |
| AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A */ |
| AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A */ |
| AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC24 periph A */ |
| AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC17 periph B */ |
| AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC26 periph A */ |
| AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC27 periph A */ |
| }; |
| }; |
| |
| can { |
| pinctrl_can_rx_tx: can_rx_tx { |
| atmel,pins = |
| <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* CANRX, conflicts with IRQ0 */ |
| AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* CANTX, conflicts with PCK0 */ |
| }; |
| }; |
| |
| pioA: gpio@fffff200 { |
| compatible = "atmel,at91rm9200-gpio"; |
| reg = <0xfffff200 0x200>; |
| interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pioA_clk>; |
| }; |
| |
| pioB: gpio@fffff400 { |
| compatible = "atmel,at91rm9200-gpio"; |
| reg = <0xfffff400 0x200>; |
| interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pioB_clk>; |
| }; |
| |
| pioC: gpio@fffff600 { |
| compatible = "atmel,at91rm9200-gpio"; |
| reg = <0xfffff600 0x200>; |
| interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pioCDE_clk>; |
| }; |
| |
| pioD: gpio@fffff800 { |
| compatible = "atmel,at91rm9200-gpio"; |
| reg = <0xfffff800 0x200>; |
| interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pioCDE_clk>; |
| }; |
| |
| pioE: gpio@fffffa00 { |
| compatible = "atmel,at91rm9200-gpio"; |
| reg = <0xfffffa00 0x200>; |
| interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&pioCDE_clk>; |
| }; |
| }; |
| |
| dbgu: serial@ffffee00 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xffffee00 0x200>; |
| interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_dbgu>; |
| clocks = <&mck>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| usart0: serial@fff8c000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xfff8c000 0x200>; |
| interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usart0>; |
| clocks = <&usart0_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| usart1: serial@fff90000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xfff90000 0x200>; |
| interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usart1>; |
| clocks = <&usart1_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| usart2: serial@fff94000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xfff94000 0x200>; |
| interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usart2>; |
| clocks = <&usart2_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| ssc0: ssc@fff98000 { |
| compatible = "atmel,at91rm9200-ssc"; |
| reg = <0xfff98000 0x4000>; |
| interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; |
| clocks = <&ssc0_clk>; |
| clock-names = "pclk"; |
| status = "disabled"; |
| }; |
| |
| ssc1: ssc@fff9c000 { |
| compatible = "atmel,at91rm9200-ssc"; |
| reg = <0xfff9c000 0x4000>; |
| interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; |
| clocks = <&ssc1_clk>; |
| clock-names = "pclk"; |
| status = "disabled"; |
| }; |
| |
| macb0: ethernet@fffbc000 { |
| compatible = "cdns,at32ap7000-macb", "cdns,macb"; |
| reg = <0xfffbc000 0x100>; |
| interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_macb_rmii>; |
| clocks = <&macb0_clk>, <&macb0_clk>; |
| clock-names = "hclk", "pclk"; |
| status = "disabled"; |
| }; |
| |
| usb1: gadget@fff78000 { |
| compatible = "atmel,at91rm9200-udc"; |
| reg = <0xfff78000 0x4000>; |
| interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; |
| clocks = <&udc_clk>, <&udpck>; |
| clock-names = "pclk", "hclk"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@fff88000 { |
| compatible = "atmel,at91sam9260-i2c"; |
| reg = <0xfff88000 0x100>; |
| interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&twi0_clk>; |
| status = "disabled"; |
| }; |
| |
| mmc0: mmc@fff80000 { |
| compatible = "atmel,hsmci"; |
| reg = <0xfff80000 0x600>; |
| interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&mci0_clk>; |
| clock-names = "mci_clk"; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@fff84000 { |
| compatible = "atmel,hsmci"; |
| reg = <0xfff84000 0x600>; |
| interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&mci1_clk>; |
| clock-names = "mci_clk"; |
| status = "disabled"; |
| }; |
| |
| watchdog@fffffd40 { |
| compatible = "atmel,at91sam9260-wdt"; |
| reg = <0xfffffd40 0x10>; |
| interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| atmel,watchdog-type = "hardware"; |
| atmel,reset-type = "all"; |
| atmel,dbg-halt; |
| atmel,idle-halt; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@fffa4000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0xfffa4000 0x200>; |
| interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spi0>; |
| clocks = <&spi0_clk>; |
| clock-names = "spi_clk"; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@fffa8000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0xfffa8000 0x200>; |
| interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spi1>; |
| clocks = <&spi1_clk>; |
| clock-names = "spi_clk"; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@fffb8000 { |
| compatible = "atmel,at91sam9rl-pwm"; |
| reg = <0xfffb8000 0x300>; |
| interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>; |
| #pwm-cells = <3>; |
| clocks = <&pwm_clk>; |
| clock-names = "pwm_clk"; |
| status = "disabled"; |
| }; |
| |
| can: can@fffac000 { |
| compatible = "atmel,at91sam9263-can"; |
| reg = <0xfffac000 0x300>; |
| interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_can_rx_tx>; |
| clocks = <&can_clk>; |
| clock-names = "can_clk"; |
| }; |
| |
| rtc@fffffd20 { |
| compatible = "atmel,at91sam9260-rtt"; |
| reg = <0xfffffd20 0x10>; |
| interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&slow_xtal>; |
| status = "disabled"; |
| }; |
| |
| rtc@fffffd50 { |
| compatible = "atmel,at91sam9260-rtt"; |
| reg = <0xfffffd50 0x10>; |
| interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&slow_xtal>; |
| status = "disabled"; |
| }; |
| |
| gpbr: syscon@fffffd60 { |
| compatible = "atmel,at91sam9260-gpbr", "syscon"; |
| reg = <0xfffffd60 0x50>; |
| status = "disabled"; |
| }; |
| }; |
| |
| fb0: fb@0x00700000 { |
| compatible = "atmel,at91sam9263-lcdc"; |
| reg = <0x00700000 0x1000>; |
| interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fb>; |
| clocks = <&lcd_clk>, <&lcd_clk>; |
| clock-names = "lcdc_clk", "hclk"; |
| status = "disabled"; |
| }; |
| |
| nand0: nand@40000000 { |
| compatible = "atmel,at91rm9200-nand"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x40000000 0x10000000 |
| 0xffffe000 0x200 |
| >; |
| atmel,nand-addr-offset = <21>; |
| atmel,nand-cmd-offset = <22>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_nand>; |
| gpios = <&pioA 22 GPIO_ACTIVE_HIGH |
| &pioD 15 GPIO_ACTIVE_HIGH |
| 0 |
| >; |
| status = "disabled"; |
| }; |
| |
| usb0: ohci@00a00000 { |
| compatible = "atmel,at91rm9200-ohci", "usb-ohci"; |
| reg = <0x00a00000 0x100000>; |
| interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; |
| clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; |
| clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; |
| status = "disabled"; |
| }; |
| }; |
| |
| i2c@0 { |
| compatible = "i2c-gpio"; |
| gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ |
| &pioB 5 GPIO_ACTIVE_HIGH /* scl */ |
| >; |
| i2c-gpio,sda-open-drain; |
| i2c-gpio,scl-open-drain; |
| i2c-gpio,delay-us = <2>; /* ~100 kHz */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |