usb: musb: add Kconfig options for each glue layer
This will make things simpler when choosing which
glue layer to compile. It avoids a lot of magic
around the "default" Kconfig option and lets the
user choose what exactly s/he wants to compile.
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 341a37a..7119d90 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -32,55 +32,35 @@
To compile this driver as a module, choose M here; the
module will be called "musb_hdrc".
-config USB_MUSB_SOC
- boolean
+choice
+ prompt "Platform Glue Layer"
depends on USB_MUSB_HDRC
- default y if ARCH_DAVINCI
- default y if ARCH_OMAP2430
- default y if ARCH_OMAP3
- default y if ARCH_OMAP4
- default y if (BF54x && !BF544)
- default y if (BF52x && !BF522 && !BF523)
-comment "DaVinci 35x and 644x USB support"
- depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx
+config USB_MUSB_DAVINCI
+ bool "DaVinci"
+ depends on ARCH_DAVINCI_DMx
-comment "DA8xx/OMAP-L1x USB support"
- depends on USB_MUSB_HDRC && ARCH_DAVINCI_DA8XX
+config USB_MUSB_DA8XX
+ bool "DA8xx/OMAP-L1x"
+ depends on ARCH_DAVINCI_DA8XX
-comment "OMAP 243x high speed USB support"
- depends on USB_MUSB_HDRC && ARCH_OMAP2430
+config USB_MUSB_TUSB6010
+ bool "TUSB6010"
+ depends on ARCH_OMAP
-comment "OMAP 343x high speed USB support"
- depends on USB_MUSB_HDRC && ARCH_OMAP3
-
-comment "OMAP 44xx high speed USB support"
- depends on USB_MUSB_HDRC && ARCH_OMAP4
-
-comment "Blackfin high speed USB Support"
- depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
+config USB_MUSB_OMAP2PLUS
+ bool "OMAP2430 and onwards"
+ depends on ARCH_OMAP2PLUS
config USB_MUSB_AM35X
- bool
- depends on USB_MUSB_HDRC && !ARCH_OMAP2430 && !ARCH_OMAP4
- select NOP_USB_XCEIV
- default MACH_OMAP3517EVM
- help
- Select this option if your platform is based on AM35x. As
- AM35x has an updated MUSB with CPPI4.1 DMA so this config
- is introduced to differentiate musb ip between OMAP3x and
- AM35x platforms.
+ bool "AM35x"
+ depends on ARCH_OMAP
-config USB_TUSB6010
- boolean "TUSB 6010 support"
- depends on USB_MUSB_HDRC && !USB_MUSB_SOC
- select NOP_USB_XCEIV
- default y
- help
- The TUSB 6010 chip, from Texas Instruments, connects a discrete
- HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
- (a high speed serial link). It can use system-specific external
- DMA controllers.
+config USB_MUSB_BLACKFIN
+ bool "Blackfin"
+ depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
+
+endchoice
choice
prompt "Driver Mode"
@@ -158,7 +138,7 @@
config MUSB_PIO_ONLY
bool 'Disable DMA (always use PIO)'
depends on USB_MUSB_HDRC
- default USB_TUSB6010 || ARCH_DAVINCI_DA8XX || USB_MUSB_AM35X
+ default USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X
help
All data is copied between memory and FIFO by the CPU.
DMA controllers are ignored.
@@ -171,21 +151,21 @@
config USB_INVENTRA_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
- default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN || ARCH_OMAP4
+ default USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
help
Enable DMA transfers using Mentor's engine.
config USB_TI_CPPI_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
- default ARCH_DAVINCI
+ default USB_MUSB_DAVINCI
help
Enable DMA transfers when TI CPPI DMA is available.
config USB_TUSB_OMAP_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
- depends on USB_TUSB6010
+ depends on USB_MUSB_TUSB6010
depends on ARCH_OMAP
default y
help