| /* |
| * Marvell Wireless LAN device driver: CFG80211 |
| * |
| * Copyright (C) 2011-2014, Marvell International Ltd. |
| * |
| * This software file (the "File") is distributed by Marvell International |
| * Ltd. under the terms of the GNU General Public License Version 2, June 1991 |
| * (the "License"). You may use, redistribute and/or modify this File in |
| * accordance with the terms and conditions of the License, a copy of which |
| * is available by writing to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the |
| * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. |
| * |
| * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| * ARE EXPRESSLY DISCLAIMED. The License provides additional details about |
| * this warranty disclaimer. |
| */ |
| |
| #include "cfg80211.h" |
| #include "main.h" |
| #include "11n.h" |
| #include "wmm.h" |
| |
| static char *reg_alpha2; |
| module_param(reg_alpha2, charp, 0); |
| |
| static const struct ieee80211_iface_limit mwifiex_ap_sta_limits[] = { |
| { |
| .max = 3, .types = BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_P2P_GO) | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | |
| BIT(NL80211_IFTYPE_AP), |
| }, |
| }; |
| |
| static const struct ieee80211_iface_combination |
| mwifiex_iface_comb_ap_sta = { |
| .limits = mwifiex_ap_sta_limits, |
| .num_different_channels = 1, |
| .n_limits = ARRAY_SIZE(mwifiex_ap_sta_limits), |
| .max_interfaces = MWIFIEX_MAX_BSS_NUM, |
| .beacon_int_infra_match = true, |
| .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | |
| BIT(NL80211_CHAN_WIDTH_20) | |
| BIT(NL80211_CHAN_WIDTH_40), |
| }; |
| |
| static const struct ieee80211_iface_combination |
| mwifiex_iface_comb_ap_sta_vht = { |
| .limits = mwifiex_ap_sta_limits, |
| .num_different_channels = 1, |
| .n_limits = ARRAY_SIZE(mwifiex_ap_sta_limits), |
| .max_interfaces = MWIFIEX_MAX_BSS_NUM, |
| .beacon_int_infra_match = true, |
| .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | |
| BIT(NL80211_CHAN_WIDTH_20) | |
| BIT(NL80211_CHAN_WIDTH_40) | |
| BIT(NL80211_CHAN_WIDTH_80), |
| }; |
| |
| static const struct |
| ieee80211_iface_combination mwifiex_iface_comb_ap_sta_drcs = { |
| .limits = mwifiex_ap_sta_limits, |
| .num_different_channels = 2, |
| .n_limits = ARRAY_SIZE(mwifiex_ap_sta_limits), |
| .max_interfaces = MWIFIEX_MAX_BSS_NUM, |
| .beacon_int_infra_match = true, |
| }; |
| |
| /* |
| * This function maps the nl802.11 channel type into driver channel type. |
| * |
| * The mapping is as follows - |
| * NL80211_CHAN_NO_HT -> IEEE80211_HT_PARAM_CHA_SEC_NONE |
| * NL80211_CHAN_HT20 -> IEEE80211_HT_PARAM_CHA_SEC_NONE |
| * NL80211_CHAN_HT40PLUS -> IEEE80211_HT_PARAM_CHA_SEC_ABOVE |
| * NL80211_CHAN_HT40MINUS -> IEEE80211_HT_PARAM_CHA_SEC_BELOW |
| * Others -> IEEE80211_HT_PARAM_CHA_SEC_NONE |
| */ |
| u8 mwifiex_chan_type_to_sec_chan_offset(enum nl80211_channel_type chan_type) |
| { |
| switch (chan_type) { |
| case NL80211_CHAN_NO_HT: |
| case NL80211_CHAN_HT20: |
| return IEEE80211_HT_PARAM_CHA_SEC_NONE; |
| case NL80211_CHAN_HT40PLUS: |
| return IEEE80211_HT_PARAM_CHA_SEC_ABOVE; |
| case NL80211_CHAN_HT40MINUS: |
| return IEEE80211_HT_PARAM_CHA_SEC_BELOW; |
| default: |
| return IEEE80211_HT_PARAM_CHA_SEC_NONE; |
| } |
| } |
| |
| /* This function maps IEEE HT secondary channel type to NL80211 channel type |
| */ |
| u8 mwifiex_sec_chan_offset_to_chan_type(u8 second_chan_offset) |
| { |
| switch (second_chan_offset) { |
| case IEEE80211_HT_PARAM_CHA_SEC_NONE: |
| return NL80211_CHAN_HT20; |
| case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: |
| return NL80211_CHAN_HT40PLUS; |
| case IEEE80211_HT_PARAM_CHA_SEC_BELOW: |
| return NL80211_CHAN_HT40MINUS; |
| default: |
| return NL80211_CHAN_HT20; |
| } |
| } |
| |
| /* |
| * This function checks whether WEP is set. |
| */ |
| static int |
| mwifiex_is_alg_wep(u32 cipher) |
| { |
| switch (cipher) { |
| case WLAN_CIPHER_SUITE_WEP40: |
| case WLAN_CIPHER_SUITE_WEP104: |
| return 1; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function retrieves the private structure from kernel wiphy structure. |
| */ |
| static void *mwifiex_cfg80211_get_adapter(struct wiphy *wiphy) |
| { |
| return (void *) (*(unsigned long *) wiphy_priv(wiphy)); |
| } |
| |
| /* |
| * CFG802.11 operation handler to delete a network key. |
| */ |
| static int |
| mwifiex_cfg80211_del_key(struct wiphy *wiphy, struct net_device *netdev, |
| u8 key_index, bool pairwise, const u8 *mac_addr) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev); |
| const u8 bc_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; |
| const u8 *peer_mac = pairwise ? mac_addr : bc_mac; |
| |
| if (mwifiex_set_encode(priv, NULL, NULL, 0, key_index, peer_mac, 1)) { |
| mwifiex_dbg(priv->adapter, ERROR, "deleting the crypto keys\n"); |
| return -EFAULT; |
| } |
| |
| mwifiex_dbg(priv->adapter, INFO, "info: crypto keys deleted\n"); |
| return 0; |
| } |
| |
| /* |
| * This function forms an skb for management frame. |
| */ |
| static int |
| mwifiex_form_mgmt_frame(struct sk_buff *skb, const u8 *buf, size_t len) |
| { |
| u8 addr[ETH_ALEN] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; |
| u16 pkt_len; |
| u32 tx_control = 0, pkt_type = PKT_TYPE_MGMT; |
| |
| pkt_len = len + ETH_ALEN; |
| |
| skb_reserve(skb, MWIFIEX_MIN_DATA_HEADER_LEN + |
| MWIFIEX_MGMT_FRAME_HEADER_SIZE + sizeof(pkt_len)); |
| memcpy(skb_push(skb, sizeof(pkt_len)), &pkt_len, sizeof(pkt_len)); |
| |
| memcpy(skb_push(skb, sizeof(tx_control)), |
| &tx_control, sizeof(tx_control)); |
| |
| memcpy(skb_push(skb, sizeof(pkt_type)), &pkt_type, sizeof(pkt_type)); |
| |
| /* Add packet data and address4 */ |
| memcpy(skb_put(skb, sizeof(struct ieee80211_hdr_3addr)), buf, |
| sizeof(struct ieee80211_hdr_3addr)); |
| memcpy(skb_put(skb, ETH_ALEN), addr, ETH_ALEN); |
| memcpy(skb_put(skb, len - sizeof(struct ieee80211_hdr_3addr)), |
| buf + sizeof(struct ieee80211_hdr_3addr), |
| len - sizeof(struct ieee80211_hdr_3addr)); |
| |
| skb->priority = LOW_PRIO_TID; |
| __net_timestamp(skb); |
| |
| return 0; |
| } |
| |
| /* |
| * CFG802.11 operation handler to transmit a management frame. |
| */ |
| static int |
| mwifiex_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, |
| struct cfg80211_mgmt_tx_params *params, u64 *cookie) |
| { |
| const u8 *buf = params->buf; |
| size_t len = params->len; |
| struct sk_buff *skb; |
| u16 pkt_len; |
| const struct ieee80211_mgmt *mgmt; |
| struct mwifiex_txinfo *tx_info; |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); |
| |
| if (!buf || !len) { |
| mwifiex_dbg(priv->adapter, ERROR, "invalid buffer and length\n"); |
| return -EFAULT; |
| } |
| |
| mgmt = (const struct ieee80211_mgmt *)buf; |
| if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA && |
| ieee80211_is_probe_resp(mgmt->frame_control)) { |
| /* Since we support offload probe resp, we need to skip probe |
| * resp in AP or GO mode */ |
| mwifiex_dbg(priv->adapter, INFO, |
| "info: skip to send probe resp in AP or GO mode\n"); |
| return 0; |
| } |
| |
| pkt_len = len + ETH_ALEN; |
| skb = dev_alloc_skb(MWIFIEX_MIN_DATA_HEADER_LEN + |
| MWIFIEX_MGMT_FRAME_HEADER_SIZE + |
| pkt_len + sizeof(pkt_len)); |
| |
| if (!skb) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "allocate skb failed for management frame\n"); |
| return -ENOMEM; |
| } |
| |
| tx_info = MWIFIEX_SKB_TXCB(skb); |
| memset(tx_info, 0, sizeof(*tx_info)); |
| tx_info->bss_num = priv->bss_num; |
| tx_info->bss_type = priv->bss_type; |
| tx_info->pkt_len = pkt_len; |
| |
| mwifiex_form_mgmt_frame(skb, buf, len); |
| *cookie = prandom_u32() | 1; |
| |
| if (ieee80211_is_action(mgmt->frame_control)) |
| skb = mwifiex_clone_skb_for_tx_status(priv, |
| skb, |
| MWIFIEX_BUF_FLAG_ACTION_TX_STATUS, cookie); |
| else |
| cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true, |
| GFP_ATOMIC); |
| |
| mwifiex_queue_tx_pkt(priv, skb); |
| |
| mwifiex_dbg(priv->adapter, INFO, "info: management frame transmitted\n"); |
| return 0; |
| } |
| |
| /* |
| * CFG802.11 operation handler to register a mgmt frame. |
| */ |
| static void |
| mwifiex_cfg80211_mgmt_frame_register(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| u16 frame_type, bool reg) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); |
| u32 mask; |
| |
| if (reg) |
| mask = priv->mgmt_frame_mask | BIT(frame_type >> 4); |
| else |
| mask = priv->mgmt_frame_mask & ~BIT(frame_type >> 4); |
| |
| if (mask != priv->mgmt_frame_mask) { |
| priv->mgmt_frame_mask = mask; |
| mwifiex_send_cmd(priv, HostCmd_CMD_MGMT_FRAME_REG, |
| HostCmd_ACT_GEN_SET, 0, |
| &priv->mgmt_frame_mask, false); |
| mwifiex_dbg(priv->adapter, INFO, "info: mgmt frame registered\n"); |
| } |
| } |
| |
| /* |
| * CFG802.11 operation handler to remain on channel. |
| */ |
| static int |
| mwifiex_cfg80211_remain_on_channel(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| struct ieee80211_channel *chan, |
| unsigned int duration, u64 *cookie) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); |
| int ret; |
| |
| if (!chan || !cookie) { |
| mwifiex_dbg(priv->adapter, ERROR, "Invalid parameter for ROC\n"); |
| return -EINVAL; |
| } |
| |
| if (priv->roc_cfg.cookie) { |
| mwifiex_dbg(priv->adapter, INFO, |
| "info: ongoing ROC, cookie = 0x%llx\n", |
| priv->roc_cfg.cookie); |
| return -EBUSY; |
| } |
| |
| ret = mwifiex_remain_on_chan_cfg(priv, HostCmd_ACT_GEN_SET, chan, |
| duration); |
| |
| if (!ret) { |
| *cookie = prandom_u32() | 1; |
| priv->roc_cfg.cookie = *cookie; |
| priv->roc_cfg.chan = *chan; |
| |
| cfg80211_ready_on_channel(wdev, *cookie, chan, |
| duration, GFP_ATOMIC); |
| |
| mwifiex_dbg(priv->adapter, INFO, |
| "info: ROC, cookie = 0x%llx\n", *cookie); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * CFG802.11 operation handler to cancel remain on channel. |
| */ |
| static int |
| mwifiex_cfg80211_cancel_remain_on_channel(struct wiphy *wiphy, |
| struct wireless_dev *wdev, u64 cookie) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); |
| int ret; |
| |
| if (cookie != priv->roc_cfg.cookie) |
| return -ENOENT; |
| |
| ret = mwifiex_remain_on_chan_cfg(priv, HostCmd_ACT_GEN_REMOVE, |
| &priv->roc_cfg.chan, 0); |
| |
| if (!ret) { |
| cfg80211_remain_on_channel_expired(wdev, cookie, |
| &priv->roc_cfg.chan, |
| GFP_ATOMIC); |
| |
| memset(&priv->roc_cfg, 0, sizeof(struct mwifiex_roc_cfg)); |
| |
| mwifiex_dbg(priv->adapter, INFO, |
| "info: cancel ROC, cookie = 0x%llx\n", cookie); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * CFG802.11 operation handler to set Tx power. |
| */ |
| static int |
| mwifiex_cfg80211_set_tx_power(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| enum nl80211_tx_power_setting type, |
| int mbm) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| struct mwifiex_private *priv; |
| struct mwifiex_power_cfg power_cfg; |
| int dbm = MBM_TO_DBM(mbm); |
| |
| if (type == NL80211_TX_POWER_FIXED) { |
| power_cfg.is_power_auto = 0; |
| power_cfg.power_level = dbm; |
| } else { |
| power_cfg.is_power_auto = 1; |
| } |
| |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); |
| |
| return mwifiex_set_tx_power(priv, &power_cfg); |
| } |
| |
| /* |
| * CFG802.11 operation handler to get Tx power. |
| */ |
| static int |
| mwifiex_cfg80211_get_tx_power(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| int *dbm) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| struct mwifiex_private *priv = mwifiex_get_priv(adapter, |
| MWIFIEX_BSS_ROLE_ANY); |
| int ret = mwifiex_send_cmd(priv, HostCmd_CMD_RF_TX_PWR, |
| HostCmd_ACT_GEN_GET, 0, NULL, true); |
| |
| if (ret < 0) |
| return ret; |
| |
| /* tx_power_level is set in HostCmd_CMD_RF_TX_PWR command handler */ |
| *dbm = priv->tx_power_level; |
| |
| return 0; |
| } |
| |
| /* |
| * CFG802.11 operation handler to set Power Save option. |
| * |
| * The timeout value, if provided, is currently ignored. |
| */ |
| static int |
| mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy, |
| struct net_device *dev, |
| bool enabled, int timeout) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| u32 ps_mode; |
| |
| if (timeout) |
| mwifiex_dbg(priv->adapter, INFO, |
| "info: ignore timeout value for IEEE Power Save\n"); |
| |
| ps_mode = enabled; |
| |
| return mwifiex_drv_set_power(priv, &ps_mode); |
| } |
| |
| /* |
| * CFG802.11 operation handler to set the default network key. |
| */ |
| static int |
| mwifiex_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *netdev, |
| u8 key_index, bool unicast, |
| bool multicast) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev); |
| |
| /* Return if WEP key not configured */ |
| if (!priv->sec_info.wep_enabled) |
| return 0; |
| |
| if (priv->bss_type == MWIFIEX_BSS_TYPE_UAP) { |
| priv->wep_key_curr_index = key_index; |
| } else if (mwifiex_set_encode(priv, NULL, NULL, 0, key_index, |
| NULL, 0)) { |
| mwifiex_dbg(priv->adapter, ERROR, "set default Tx key index\n"); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * CFG802.11 operation handler to add a network key. |
| */ |
| static int |
| mwifiex_cfg80211_add_key(struct wiphy *wiphy, struct net_device *netdev, |
| u8 key_index, bool pairwise, const u8 *mac_addr, |
| struct key_params *params) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev); |
| struct mwifiex_wep_key *wep_key; |
| const u8 bc_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; |
| const u8 *peer_mac = pairwise ? mac_addr : bc_mac; |
| |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP && |
| (params->cipher == WLAN_CIPHER_SUITE_WEP40 || |
| params->cipher == WLAN_CIPHER_SUITE_WEP104)) { |
| if (params->key && params->key_len) { |
| wep_key = &priv->wep_key[key_index]; |
| memset(wep_key, 0, sizeof(struct mwifiex_wep_key)); |
| memcpy(wep_key->key_material, params->key, |
| params->key_len); |
| wep_key->key_index = key_index; |
| wep_key->key_length = params->key_len; |
| priv->sec_info.wep_enabled = 1; |
| } |
| return 0; |
| } |
| |
| if (mwifiex_set_encode(priv, params, params->key, params->key_len, |
| key_index, peer_mac, 0)) { |
| mwifiex_dbg(priv->adapter, ERROR, "crypto keys added\n"); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * CFG802.11 operation handler to set default mgmt key. |
| */ |
| static int |
| mwifiex_cfg80211_set_default_mgmt_key(struct wiphy *wiphy, |
| struct net_device *netdev, |
| u8 key_index) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(netdev); |
| struct mwifiex_ds_encrypt_key encrypt_key; |
| |
| wiphy_dbg(wiphy, "set default mgmt key, key index=%d\n", key_index); |
| |
| memset(&encrypt_key, 0, sizeof(struct mwifiex_ds_encrypt_key)); |
| encrypt_key.key_len = WLAN_KEY_LEN_CCMP; |
| encrypt_key.key_index = key_index; |
| encrypt_key.is_igtk_def_key = true; |
| eth_broadcast_addr(encrypt_key.mac_addr); |
| |
| return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL, |
| HostCmd_ACT_GEN_SET, true, &encrypt_key, true); |
| } |
| |
| /* |
| * This function sends domain information to the firmware. |
| * |
| * The following information are passed to the firmware - |
| * - Country codes |
| * - Sub bands (first channel, number of channels, maximum Tx power) |
| */ |
| int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy) |
| { |
| u8 no_of_triplet = 0; |
| struct ieee80211_country_ie_triplet *t; |
| u8 no_of_parsed_chan = 0; |
| u8 first_chan = 0, next_chan = 0, max_pwr = 0; |
| u8 i, flag = 0; |
| enum nl80211_band band; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *ch; |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| struct mwifiex_private *priv; |
| struct mwifiex_802_11d_domain_reg *domain_info = &adapter->domain_reg; |
| |
| /* Set country code */ |
| domain_info->country_code[0] = adapter->country_code[0]; |
| domain_info->country_code[1] = adapter->country_code[1]; |
| domain_info->country_code[2] = ' '; |
| |
| band = mwifiex_band_to_radio_type(adapter->config_bands); |
| if (!wiphy->bands[band]) { |
| mwifiex_dbg(adapter, ERROR, |
| "11D: setting domain info in FW\n"); |
| return -1; |
| } |
| |
| sband = wiphy->bands[band]; |
| |
| for (i = 0; i < sband->n_channels ; i++) { |
| ch = &sband->channels[i]; |
| if (ch->flags & IEEE80211_CHAN_DISABLED) |
| continue; |
| |
| if (!flag) { |
| flag = 1; |
| first_chan = (u32) ch->hw_value; |
| next_chan = first_chan; |
| max_pwr = ch->max_power; |
| no_of_parsed_chan = 1; |
| continue; |
| } |
| |
| if (ch->hw_value == next_chan + 1 && |
| ch->max_power == max_pwr) { |
| next_chan++; |
| no_of_parsed_chan++; |
| } else { |
| t = &domain_info->triplet[no_of_triplet]; |
| t->chans.first_channel = first_chan; |
| t->chans.num_channels = no_of_parsed_chan; |
| t->chans.max_power = max_pwr; |
| no_of_triplet++; |
| first_chan = (u32) ch->hw_value; |
| next_chan = first_chan; |
| max_pwr = ch->max_power; |
| no_of_parsed_chan = 1; |
| } |
| } |
| |
| if (flag) { |
| t = &domain_info->triplet[no_of_triplet]; |
| t->chans.first_channel = first_chan; |
| t->chans.num_channels = no_of_parsed_chan; |
| t->chans.max_power = max_pwr; |
| no_of_triplet++; |
| } |
| |
| domain_info->no_of_triplet = no_of_triplet; |
| |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); |
| |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_802_11D_DOMAIN_INFO, |
| HostCmd_ACT_GEN_SET, 0, NULL, false)) { |
| mwifiex_dbg(adapter, INFO, |
| "11D: setting domain info in FW\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * CFG802.11 regulatory domain callback function. |
| * |
| * This function is called when the regulatory domain is changed due to the |
| * following reasons - |
| * - Set by driver |
| * - Set by system core |
| * - Set by user |
| * - Set bt Country IE |
| */ |
| static void mwifiex_reg_notifier(struct wiphy *wiphy, |
| struct regulatory_request *request) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| struct mwifiex_private *priv = mwifiex_get_priv(adapter, |
| MWIFIEX_BSS_ROLE_ANY); |
| mwifiex_dbg(adapter, INFO, |
| "info: cfg80211 regulatory domain callback for %c%c\n", |
| request->alpha2[0], request->alpha2[1]); |
| |
| switch (request->initiator) { |
| case NL80211_REGDOM_SET_BY_DRIVER: |
| case NL80211_REGDOM_SET_BY_CORE: |
| case NL80211_REGDOM_SET_BY_USER: |
| case NL80211_REGDOM_SET_BY_COUNTRY_IE: |
| break; |
| default: |
| mwifiex_dbg(adapter, ERROR, |
| "unknown regdom initiator: %d\n", |
| request->initiator); |
| return; |
| } |
| |
| /* Don't send world or same regdom info to firmware */ |
| if (strncmp(request->alpha2, "00", 2) && |
| strncmp(request->alpha2, adapter->country_code, |
| sizeof(request->alpha2))) { |
| memcpy(adapter->country_code, request->alpha2, |
| sizeof(request->alpha2)); |
| mwifiex_send_domain_info_cmd_fw(wiphy); |
| mwifiex_dnld_txpwr_table(priv); |
| } |
| } |
| |
| /* |
| * This function sets the fragmentation threshold. |
| * |
| * The fragmentation threshold value must lie between MWIFIEX_FRAG_MIN_VALUE |
| * and MWIFIEX_FRAG_MAX_VALUE. |
| */ |
| static int |
| mwifiex_set_frag(struct mwifiex_private *priv, u32 frag_thr) |
| { |
| if (frag_thr < MWIFIEX_FRAG_MIN_VALUE || |
| frag_thr > MWIFIEX_FRAG_MAX_VALUE) |
| frag_thr = MWIFIEX_FRAG_MAX_VALUE; |
| |
| return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, |
| HostCmd_ACT_GEN_SET, FRAG_THRESH_I, |
| &frag_thr, true); |
| } |
| |
| /* |
| * This function sets the RTS threshold. |
| |
| * The rts value must lie between MWIFIEX_RTS_MIN_VALUE |
| * and MWIFIEX_RTS_MAX_VALUE. |
| */ |
| static int |
| mwifiex_set_rts(struct mwifiex_private *priv, u32 rts_thr) |
| { |
| if (rts_thr < MWIFIEX_RTS_MIN_VALUE || rts_thr > MWIFIEX_RTS_MAX_VALUE) |
| rts_thr = MWIFIEX_RTS_MAX_VALUE; |
| |
| return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, |
| HostCmd_ACT_GEN_SET, RTS_THRESH_I, |
| &rts_thr, true); |
| } |
| |
| /* |
| * CFG802.11 operation handler to set wiphy parameters. |
| * |
| * This function can be used to set the RTS threshold and the |
| * Fragmentation threshold of the driver. |
| */ |
| static int |
| mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| struct mwifiex_private *priv; |
| struct mwifiex_uap_bss_param *bss_cfg; |
| int ret; |
| |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); |
| |
| switch (priv->bss_role) { |
| case MWIFIEX_BSS_ROLE_UAP: |
| if (priv->bss_started) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot change wiphy params when bss started"); |
| return -EINVAL; |
| } |
| |
| bss_cfg = kzalloc(sizeof(*bss_cfg), GFP_KERNEL); |
| if (!bss_cfg) |
| return -ENOMEM; |
| |
| mwifiex_set_sys_config_invalid_data(bss_cfg); |
| |
| if (changed & WIPHY_PARAM_RTS_THRESHOLD) |
| bss_cfg->rts_threshold = wiphy->rts_threshold; |
| if (changed & WIPHY_PARAM_FRAG_THRESHOLD) |
| bss_cfg->frag_threshold = wiphy->frag_threshold; |
| if (changed & WIPHY_PARAM_RETRY_LONG) |
| bss_cfg->retry_limit = wiphy->retry_long; |
| |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_UAP_SYS_CONFIG, |
| HostCmd_ACT_GEN_SET, |
| UAP_BSS_PARAMS_I, bss_cfg, |
| false); |
| |
| kfree(bss_cfg); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, |
| "Failed to set wiphy phy params\n"); |
| return ret; |
| } |
| break; |
| |
| case MWIFIEX_BSS_ROLE_STA: |
| if (priv->media_connected) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot change wiphy params when connected"); |
| return -EINVAL; |
| } |
| if (changed & WIPHY_PARAM_RTS_THRESHOLD) { |
| ret = mwifiex_set_rts(priv, |
| wiphy->rts_threshold); |
| if (ret) |
| return ret; |
| } |
| if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { |
| ret = mwifiex_set_frag(priv, |
| wiphy->frag_threshold); |
| if (ret) |
| return ret; |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| mwifiex_cfg80211_deinit_p2p(struct mwifiex_private *priv) |
| { |
| u16 mode = P2P_MODE_DISABLE; |
| |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG, |
| HostCmd_ACT_GEN_SET, 0, &mode, true)) |
| return -1; |
| |
| return 0; |
| } |
| |
| /* |
| * This function initializes the functionalities for P2P client. |
| * The P2P client initialization sequence is: |
| * disable -> device -> client |
| */ |
| static int |
| mwifiex_cfg80211_init_p2p_client(struct mwifiex_private *priv) |
| { |
| u16 mode; |
| |
| if (mwifiex_cfg80211_deinit_p2p(priv)) |
| return -1; |
| |
| mode = P2P_MODE_DEVICE; |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG, |
| HostCmd_ACT_GEN_SET, 0, &mode, true)) |
| return -1; |
| |
| mode = P2P_MODE_CLIENT; |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG, |
| HostCmd_ACT_GEN_SET, 0, &mode, true)) |
| return -1; |
| |
| return 0; |
| } |
| |
| /* |
| * This function initializes the functionalities for P2P GO. |
| * The P2P GO initialization sequence is: |
| * disable -> device -> GO |
| */ |
| static int |
| mwifiex_cfg80211_init_p2p_go(struct mwifiex_private *priv) |
| { |
| u16 mode; |
| |
| if (mwifiex_cfg80211_deinit_p2p(priv)) |
| return -1; |
| |
| mode = P2P_MODE_DEVICE; |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG, |
| HostCmd_ACT_GEN_SET, 0, &mode, true)) |
| return -1; |
| |
| mode = P2P_MODE_GO; |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG, |
| HostCmd_ACT_GEN_SET, 0, &mode, true)) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int mwifiex_deinit_priv_params(struct mwifiex_private *priv) |
| { |
| struct mwifiex_adapter *adapter = priv->adapter; |
| unsigned long flags; |
| |
| priv->mgmt_frame_mask = 0; |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_MGMT_FRAME_REG, |
| HostCmd_ACT_GEN_SET, 0, |
| &priv->mgmt_frame_mask, false)) { |
| mwifiex_dbg(adapter, ERROR, |
| "could not unregister mgmt frame rx\n"); |
| return -1; |
| } |
| |
| mwifiex_deauthenticate(priv, NULL); |
| |
| spin_lock_irqsave(&adapter->main_proc_lock, flags); |
| adapter->main_locked = true; |
| if (adapter->mwifiex_processing) { |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); |
| flush_workqueue(adapter->workqueue); |
| } else { |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); |
| } |
| |
| spin_lock_irqsave(&adapter->rx_proc_lock, flags); |
| adapter->rx_locked = true; |
| if (adapter->rx_processing) { |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); |
| flush_workqueue(adapter->rx_workqueue); |
| } else { |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); |
| } |
| |
| mwifiex_free_priv(priv); |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; |
| priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM; |
| |
| return 0; |
| } |
| |
| static int |
| mwifiex_init_new_priv_params(struct mwifiex_private *priv, |
| struct net_device *dev, |
| enum nl80211_iftype type) |
| { |
| struct mwifiex_adapter *adapter = priv->adapter; |
| unsigned long flags; |
| |
| mwifiex_init_priv(priv); |
| |
| priv->bss_mode = type; |
| priv->wdev.iftype = type; |
| |
| mwifiex_init_priv_params(priv, priv->netdev); |
| priv->bss_started = 0; |
| |
| switch (type) { |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_ADHOC: |
| priv->bss_num = mwifiex_get_unused_bss_num(adapter, |
| MWIFIEX_BSS_TYPE_STA); |
| priv->bss_role = MWIFIEX_BSS_ROLE_STA; |
| priv->bss_type = MWIFIEX_BSS_TYPE_STA; |
| break; |
| case NL80211_IFTYPE_P2P_CLIENT: |
| priv->bss_num = mwifiex_get_unused_bss_num(adapter, |
| MWIFIEX_BSS_TYPE_P2P); |
| priv->bss_role = MWIFIEX_BSS_ROLE_STA; |
| priv->bss_type = MWIFIEX_BSS_TYPE_P2P; |
| break; |
| case NL80211_IFTYPE_P2P_GO: |
| priv->bss_num = mwifiex_get_unused_bss_num(adapter, |
| MWIFIEX_BSS_TYPE_P2P); |
| priv->bss_role = MWIFIEX_BSS_ROLE_UAP; |
| priv->bss_type = MWIFIEX_BSS_TYPE_P2P; |
| break; |
| case NL80211_IFTYPE_AP: |
| priv->bss_num = mwifiex_get_unused_bss_num(adapter, |
| MWIFIEX_BSS_TYPE_UAP); |
| priv->bss_type = MWIFIEX_BSS_TYPE_UAP; |
| priv->bss_role = MWIFIEX_BSS_ROLE_UAP; |
| break; |
| default: |
| mwifiex_dbg(adapter, ERROR, |
| "%s: changing to %d not supported\n", |
| dev->name, type); |
| return -EOPNOTSUPP; |
| } |
| |
| spin_lock_irqsave(&adapter->main_proc_lock, flags); |
| adapter->main_locked = false; |
| spin_unlock_irqrestore(&adapter->main_proc_lock, flags); |
| |
| spin_lock_irqsave(&adapter->rx_proc_lock, flags); |
| adapter->rx_locked = false; |
| spin_unlock_irqrestore(&adapter->rx_proc_lock, flags); |
| |
| return 0; |
| } |
| |
| static int |
| mwifiex_change_vif_to_p2p(struct net_device *dev, |
| enum nl80211_iftype curr_iftype, |
| enum nl80211_iftype type, u32 *flags, |
| struct vif_params *params) |
| { |
| struct mwifiex_private *priv; |
| struct mwifiex_adapter *adapter; |
| |
| priv = mwifiex_netdev_get_priv(dev); |
| |
| if (!priv) |
| return -1; |
| |
| adapter = priv->adapter; |
| |
| if (adapter->curr_iface_comb.p2p_intf == |
| adapter->iface_limit.p2p_intf) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot create multiple P2P ifaces\n"); |
| return -1; |
| } |
| |
| mwifiex_dbg(adapter, INFO, |
| "%s: changing role to p2p\n", dev->name); |
| |
| if (mwifiex_deinit_priv_params(priv)) |
| return -1; |
| if (mwifiex_init_new_priv_params(priv, dev, type)) |
| return -1; |
| |
| switch (type) { |
| case NL80211_IFTYPE_P2P_CLIENT: |
| if (mwifiex_cfg80211_init_p2p_client(priv)) |
| return -EFAULT; |
| break; |
| case NL80211_IFTYPE_P2P_GO: |
| if (mwifiex_cfg80211_init_p2p_go(priv)) |
| return -EFAULT; |
| break; |
| default: |
| mwifiex_dbg(adapter, ERROR, |
| "%s: changing to %d not supported\n", |
| dev->name, type); |
| return -EOPNOTSUPP; |
| } |
| |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, |
| HostCmd_ACT_GEN_SET, 0, NULL, true)) |
| return -1; |
| |
| if (mwifiex_sta_init_cmd(priv, false, false)) |
| return -1; |
| |
| switch (curr_iftype) { |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_ADHOC: |
| adapter->curr_iface_comb.sta_intf--; |
| break; |
| case NL80211_IFTYPE_AP: |
| adapter->curr_iface_comb.uap_intf--; |
| break; |
| default: |
| break; |
| } |
| |
| adapter->curr_iface_comb.p2p_intf++; |
| dev->ieee80211_ptr->iftype = type; |
| |
| return 0; |
| } |
| |
| static int |
| mwifiex_change_vif_to_sta_adhoc(struct net_device *dev, |
| enum nl80211_iftype curr_iftype, |
| enum nl80211_iftype type, u32 *flags, |
| struct vif_params *params) |
| { |
| struct mwifiex_private *priv; |
| struct mwifiex_adapter *adapter; |
| |
| priv = mwifiex_netdev_get_priv(dev); |
| |
| if (!priv) |
| return -1; |
| |
| adapter = priv->adapter; |
| |
| if ((curr_iftype != NL80211_IFTYPE_P2P_CLIENT && |
| curr_iftype != NL80211_IFTYPE_P2P_GO) && |
| (adapter->curr_iface_comb.sta_intf == |
| adapter->iface_limit.sta_intf)) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot create multiple station/adhoc ifaces\n"); |
| return -1; |
| } |
| |
| if (type == NL80211_IFTYPE_STATION) |
| mwifiex_dbg(adapter, INFO, |
| "%s: changing role to station\n", dev->name); |
| else |
| mwifiex_dbg(adapter, INFO, |
| "%s: changing role to adhoc\n", dev->name); |
| |
| if (mwifiex_deinit_priv_params(priv)) |
| return -1; |
| if (mwifiex_init_new_priv_params(priv, dev, type)) |
| return -1; |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, |
| HostCmd_ACT_GEN_SET, 0, NULL, true)) |
| return -1; |
| if (mwifiex_sta_init_cmd(priv, false, false)) |
| return -1; |
| |
| switch (curr_iftype) { |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_P2P_GO: |
| adapter->curr_iface_comb.p2p_intf--; |
| break; |
| case NL80211_IFTYPE_AP: |
| adapter->curr_iface_comb.uap_intf--; |
| break; |
| default: |
| break; |
| } |
| |
| adapter->curr_iface_comb.sta_intf++; |
| dev->ieee80211_ptr->iftype = type; |
| return 0; |
| } |
| |
| static int |
| mwifiex_change_vif_to_ap(struct net_device *dev, |
| enum nl80211_iftype curr_iftype, |
| enum nl80211_iftype type, u32 *flags, |
| struct vif_params *params) |
| { |
| struct mwifiex_private *priv; |
| struct mwifiex_adapter *adapter; |
| |
| priv = mwifiex_netdev_get_priv(dev); |
| |
| if (!priv) |
| return -1; |
| |
| adapter = priv->adapter; |
| |
| if (adapter->curr_iface_comb.uap_intf == |
| adapter->iface_limit.uap_intf) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot create multiple AP ifaces\n"); |
| return -1; |
| } |
| |
| mwifiex_dbg(adapter, INFO, |
| "%s: changing role to AP\n", dev->name); |
| |
| if (mwifiex_deinit_priv_params(priv)) |
| return -1; |
| if (mwifiex_init_new_priv_params(priv, dev, type)) |
| return -1; |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, |
| HostCmd_ACT_GEN_SET, 0, NULL, true)) |
| return -1; |
| if (mwifiex_sta_init_cmd(priv, false, false)) |
| return -1; |
| |
| switch (curr_iftype) { |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_P2P_GO: |
| adapter->curr_iface_comb.p2p_intf--; |
| break; |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_ADHOC: |
| adapter->curr_iface_comb.sta_intf--; |
| break; |
| default: |
| break; |
| } |
| |
| adapter->curr_iface_comb.uap_intf++; |
| dev->ieee80211_ptr->iftype = type; |
| return 0; |
| } |
| /* |
| * CFG802.11 operation handler to change interface type. |
| */ |
| static int |
| mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy, |
| struct net_device *dev, |
| enum nl80211_iftype type, u32 *flags, |
| struct vif_params *params) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| enum nl80211_iftype curr_iftype = dev->ieee80211_ptr->iftype; |
| |
| if (priv->scan_request) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "change virtual interface: scan in process\n"); |
| return -EBUSY; |
| } |
| |
| switch (curr_iftype) { |
| case NL80211_IFTYPE_ADHOC: |
| switch (type) { |
| case NL80211_IFTYPE_STATION: |
| priv->bss_mode = type; |
| priv->sec_info.authentication_mode = |
| NL80211_AUTHTYPE_OPEN_SYSTEM; |
| dev->ieee80211_ptr->iftype = type; |
| mwifiex_deauthenticate(priv, NULL); |
| return mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, |
| HostCmd_ACT_GEN_SET, 0, NULL, |
| true); |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_P2P_GO: |
| return mwifiex_change_vif_to_p2p(dev, curr_iftype, |
| type, flags, params); |
| case NL80211_IFTYPE_AP: |
| return mwifiex_change_vif_to_ap(dev, curr_iftype, type, |
| flags, params); |
| case NL80211_IFTYPE_UNSPECIFIED: |
| mwifiex_dbg(priv->adapter, INFO, |
| "%s: kept type as IBSS\n", dev->name); |
| case NL80211_IFTYPE_ADHOC: /* This shouldn't happen */ |
| return 0; |
| default: |
| mwifiex_dbg(priv->adapter, ERROR, |
| "%s: changing to %d not supported\n", |
| dev->name, type); |
| return -EOPNOTSUPP; |
| } |
| break; |
| case NL80211_IFTYPE_STATION: |
| switch (type) { |
| case NL80211_IFTYPE_ADHOC: |
| priv->bss_mode = type; |
| priv->sec_info.authentication_mode = |
| NL80211_AUTHTYPE_OPEN_SYSTEM; |
| dev->ieee80211_ptr->iftype = type; |
| mwifiex_deauthenticate(priv, NULL); |
| return mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, |
| HostCmd_ACT_GEN_SET, 0, NULL, |
| true); |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_P2P_GO: |
| return mwifiex_change_vif_to_p2p(dev, curr_iftype, |
| type, flags, params); |
| case NL80211_IFTYPE_AP: |
| return mwifiex_change_vif_to_ap(dev, curr_iftype, type, |
| flags, params); |
| case NL80211_IFTYPE_UNSPECIFIED: |
| mwifiex_dbg(priv->adapter, INFO, |
| "%s: kept type as STA\n", dev->name); |
| case NL80211_IFTYPE_STATION: /* This shouldn't happen */ |
| return 0; |
| default: |
| mwifiex_dbg(priv->adapter, ERROR, |
| "%s: changing to %d not supported\n", |
| dev->name, type); |
| return -EOPNOTSUPP; |
| } |
| break; |
| case NL80211_IFTYPE_AP: |
| switch (type) { |
| case NL80211_IFTYPE_ADHOC: |
| case NL80211_IFTYPE_STATION: |
| return mwifiex_change_vif_to_sta_adhoc(dev, curr_iftype, |
| type, flags, |
| params); |
| break; |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_P2P_GO: |
| return mwifiex_change_vif_to_p2p(dev, curr_iftype, |
| type, flags, params); |
| case NL80211_IFTYPE_UNSPECIFIED: |
| mwifiex_dbg(priv->adapter, INFO, |
| "%s: kept type as AP\n", dev->name); |
| case NL80211_IFTYPE_AP: /* This shouldn't happen */ |
| return 0; |
| default: |
| mwifiex_dbg(priv->adapter, ERROR, |
| "%s: changing to %d not supported\n", |
| dev->name, type); |
| return -EOPNOTSUPP; |
| } |
| break; |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_P2P_GO: |
| switch (type) { |
| case NL80211_IFTYPE_STATION: |
| if (mwifiex_cfg80211_deinit_p2p(priv)) |
| return -EFAULT; |
| priv->adapter->curr_iface_comb.p2p_intf--; |
| priv->adapter->curr_iface_comb.sta_intf++; |
| dev->ieee80211_ptr->iftype = type; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| if (mwifiex_cfg80211_deinit_p2p(priv)) |
| return -EFAULT; |
| return mwifiex_change_vif_to_sta_adhoc(dev, curr_iftype, |
| type, flags, |
| params); |
| break; |
| case NL80211_IFTYPE_AP: |
| if (mwifiex_cfg80211_deinit_p2p(priv)) |
| return -EFAULT; |
| return mwifiex_change_vif_to_ap(dev, curr_iftype, type, |
| flags, params); |
| case NL80211_IFTYPE_UNSPECIFIED: |
| mwifiex_dbg(priv->adapter, INFO, |
| "%s: kept type as P2P\n", dev->name); |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_P2P_GO: |
| return 0; |
| default: |
| mwifiex_dbg(priv->adapter, ERROR, |
| "%s: changing to %d not supported\n", |
| dev->name, type); |
| return -EOPNOTSUPP; |
| } |
| break; |
| default: |
| mwifiex_dbg(priv->adapter, ERROR, |
| "%s: unknown iftype: %d\n", |
| dev->name, dev->ieee80211_ptr->iftype); |
| return -EOPNOTSUPP; |
| } |
| |
| |
| return 0; |
| } |
| |
| static void |
| mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo, |
| struct rate_info *rate) |
| { |
| struct mwifiex_adapter *adapter = priv->adapter; |
| |
| if (adapter->is_hw_11ac_capable) { |
| /* bit[1-0]: 00=LG 01=HT 10=VHT */ |
| if (tx_htinfo & BIT(0)) { |
| /* HT */ |
| rate->mcs = priv->tx_rate; |
| rate->flags |= RATE_INFO_FLAGS_MCS; |
| } |
| if (tx_htinfo & BIT(1)) { |
| /* VHT */ |
| rate->mcs = priv->tx_rate & 0x0F; |
| rate->flags |= RATE_INFO_FLAGS_VHT_MCS; |
| } |
| |
| if (tx_htinfo & (BIT(1) | BIT(0))) { |
| /* HT or VHT */ |
| switch (tx_htinfo & (BIT(3) | BIT(2))) { |
| case 0: |
| rate->bw = RATE_INFO_BW_20; |
| break; |
| case (BIT(2)): |
| rate->bw = RATE_INFO_BW_40; |
| break; |
| case (BIT(3)): |
| rate->bw = RATE_INFO_BW_80; |
| break; |
| case (BIT(3) | BIT(2)): |
| rate->bw = RATE_INFO_BW_160; |
| break; |
| } |
| |
| if (tx_htinfo & BIT(4)) |
| rate->flags |= RATE_INFO_FLAGS_SHORT_GI; |
| |
| if ((priv->tx_rate >> 4) == 1) |
| rate->nss = 2; |
| else |
| rate->nss = 1; |
| } |
| } else { |
| /* |
| * Bit 0 in tx_htinfo indicates that current Tx rate |
| * is 11n rate. Valid MCS index values for us are 0 to 15. |
| */ |
| if ((tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) { |
| rate->mcs = priv->tx_rate; |
| rate->flags |= RATE_INFO_FLAGS_MCS; |
| rate->bw = RATE_INFO_BW_20; |
| if (tx_htinfo & BIT(1)) |
| rate->bw = RATE_INFO_BW_40; |
| if (tx_htinfo & BIT(2)) |
| rate->flags |= RATE_INFO_FLAGS_SHORT_GI; |
| } |
| } |
| } |
| |
| /* |
| * This function dumps the station information on a buffer. |
| * |
| * The following information are shown - |
| * - Total bytes transmitted |
| * - Total bytes received |
| * - Total packets transmitted |
| * - Total packets received |
| * - Signal quality level |
| * - Transmission rate |
| */ |
| static int |
| mwifiex_dump_station_info(struct mwifiex_private *priv, |
| struct mwifiex_sta_node *node, |
| struct station_info *sinfo) |
| { |
| u32 rate; |
| |
| sinfo->filled = BIT(NL80211_STA_INFO_RX_BYTES) | BIT(NL80211_STA_INFO_TX_BYTES) | |
| BIT(NL80211_STA_INFO_RX_PACKETS) | BIT(NL80211_STA_INFO_TX_PACKETS) | |
| BIT(NL80211_STA_INFO_TX_BITRATE) | |
| BIT(NL80211_STA_INFO_SIGNAL) | BIT(NL80211_STA_INFO_SIGNAL_AVG); |
| |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) { |
| if (!node) |
| return -ENOENT; |
| |
| sinfo->filled |= BIT(NL80211_STA_INFO_INACTIVE_TIME) | |
| BIT(NL80211_STA_INFO_TX_FAILED); |
| sinfo->inactive_time = |
| jiffies_to_msecs(jiffies - node->stats.last_rx); |
| |
| sinfo->signal = node->stats.rssi; |
| sinfo->signal_avg = node->stats.rssi; |
| sinfo->rx_bytes = node->stats.rx_bytes; |
| sinfo->tx_bytes = node->stats.tx_bytes; |
| sinfo->rx_packets = node->stats.rx_packets; |
| sinfo->tx_packets = node->stats.tx_packets; |
| sinfo->tx_failed = node->stats.tx_failed; |
| |
| mwifiex_parse_htinfo(priv, node->stats.last_tx_htinfo, |
| &sinfo->txrate); |
| sinfo->txrate.legacy = node->stats.last_tx_rate * 5; |
| |
| return 0; |
| } |
| |
| /* Get signal information from the firmware */ |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_RSSI_INFO, |
| HostCmd_ACT_GEN_GET, 0, NULL, true)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "failed to get signal information\n"); |
| return -EFAULT; |
| } |
| |
| if (mwifiex_drv_get_data_rate(priv, &rate)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "getting data rate error\n"); |
| return -EFAULT; |
| } |
| |
| /* Get DTIM period information from firmware */ |
| mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, |
| HostCmd_ACT_GEN_GET, DTIM_PERIOD_I, |
| &priv->dtim_period, true); |
| |
| mwifiex_parse_htinfo(priv, priv->tx_htinfo, &sinfo->txrate); |
| |
| sinfo->signal_avg = priv->bcn_rssi_avg; |
| sinfo->rx_bytes = priv->stats.rx_bytes; |
| sinfo->tx_bytes = priv->stats.tx_bytes; |
| sinfo->rx_packets = priv->stats.rx_packets; |
| sinfo->tx_packets = priv->stats.tx_packets; |
| sinfo->signal = priv->bcn_rssi_avg; |
| /* bit rate is in 500 kb/s units. Convert it to 100kb/s units */ |
| sinfo->txrate.legacy = rate * 5; |
| |
| if (priv->bss_mode == NL80211_IFTYPE_STATION) { |
| sinfo->filled |= BIT(NL80211_STA_INFO_BSS_PARAM); |
| sinfo->bss_param.flags = 0; |
| if (priv->curr_bss_params.bss_descriptor.cap_info_bitmap & |
| WLAN_CAPABILITY_SHORT_PREAMBLE) |
| sinfo->bss_param.flags |= |
| BSS_PARAM_FLAGS_SHORT_PREAMBLE; |
| if (priv->curr_bss_params.bss_descriptor.cap_info_bitmap & |
| WLAN_CAPABILITY_SHORT_SLOT_TIME) |
| sinfo->bss_param.flags |= |
| BSS_PARAM_FLAGS_SHORT_SLOT_TIME; |
| sinfo->bss_param.dtim_period = priv->dtim_period; |
| sinfo->bss_param.beacon_interval = |
| priv->curr_bss_params.bss_descriptor.beacon_period; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * CFG802.11 operation handler to get station information. |
| * |
| * This function only works in connected mode, and dumps the |
| * requested station information, if available. |
| */ |
| static int |
| mwifiex_cfg80211_get_station(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *mac, struct station_info *sinfo) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| if (!priv->media_connected) |
| return -ENOENT; |
| if (memcmp(mac, priv->cfg_bssid, ETH_ALEN)) |
| return -ENOENT; |
| |
| return mwifiex_dump_station_info(priv, NULL, sinfo); |
| } |
| |
| /* |
| * CFG802.11 operation handler to dump station information. |
| */ |
| static int |
| mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev, |
| int idx, u8 *mac, struct station_info *sinfo) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| static struct mwifiex_sta_node *node; |
| |
| if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) && |
| priv->media_connected && idx == 0) { |
| ether_addr_copy(mac, priv->cfg_bssid); |
| return mwifiex_dump_station_info(priv, NULL, sinfo); |
| } else if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) { |
| mwifiex_send_cmd(priv, HOST_CMD_APCMD_STA_LIST, |
| HostCmd_ACT_GEN_GET, 0, NULL, true); |
| |
| if (node && (&node->list == &priv->sta_list)) { |
| node = NULL; |
| return -ENOENT; |
| } |
| |
| node = list_prepare_entry(node, &priv->sta_list, list); |
| list_for_each_entry_continue(node, &priv->sta_list, list) { |
| ether_addr_copy(mac, node->mac_addr); |
| return mwifiex_dump_station_info(priv, node, sinfo); |
| } |
| } |
| |
| return -ENOENT; |
| } |
| |
| static int |
| mwifiex_cfg80211_dump_survey(struct wiphy *wiphy, struct net_device *dev, |
| int idx, struct survey_info *survey) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| struct mwifiex_chan_stats *pchan_stats = priv->adapter->chan_stats; |
| enum nl80211_band band; |
| |
| mwifiex_dbg(priv->adapter, DUMP, "dump_survey idx=%d\n", idx); |
| |
| memset(survey, 0, sizeof(struct survey_info)); |
| |
| if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) && |
| priv->media_connected && idx == 0) { |
| u8 curr_bss_band = priv->curr_bss_params.band; |
| u32 chan = priv->curr_bss_params.bss_descriptor.channel; |
| |
| band = mwifiex_band_to_radio_type(curr_bss_band); |
| survey->channel = ieee80211_get_channel(wiphy, |
| ieee80211_channel_to_frequency(chan, band)); |
| |
| if (priv->bcn_nf_last) { |
| survey->filled = SURVEY_INFO_NOISE_DBM; |
| survey->noise = priv->bcn_nf_last; |
| } |
| return 0; |
| } |
| |
| if (idx >= priv->adapter->num_in_chan_stats) |
| return -ENOENT; |
| |
| if (!pchan_stats[idx].cca_scan_dur) |
| return 0; |
| |
| band = pchan_stats[idx].bandcfg; |
| survey->channel = ieee80211_get_channel(wiphy, |
| ieee80211_channel_to_frequency(pchan_stats[idx].chan_num, band)); |
| survey->filled = SURVEY_INFO_NOISE_DBM | |
| SURVEY_INFO_TIME | |
| SURVEY_INFO_TIME_BUSY; |
| survey->noise = pchan_stats[idx].noise; |
| survey->time = pchan_stats[idx].cca_scan_dur; |
| survey->time_busy = pchan_stats[idx].cca_busy_dur; |
| |
| return 0; |
| } |
| |
| /* Supported rates to be advertised to the cfg80211 */ |
| static struct ieee80211_rate mwifiex_rates[] = { |
| {.bitrate = 10, .hw_value = 2, }, |
| {.bitrate = 20, .hw_value = 4, }, |
| {.bitrate = 55, .hw_value = 11, }, |
| {.bitrate = 110, .hw_value = 22, }, |
| {.bitrate = 60, .hw_value = 12, }, |
| {.bitrate = 90, .hw_value = 18, }, |
| {.bitrate = 120, .hw_value = 24, }, |
| {.bitrate = 180, .hw_value = 36, }, |
| {.bitrate = 240, .hw_value = 48, }, |
| {.bitrate = 360, .hw_value = 72, }, |
| {.bitrate = 480, .hw_value = 96, }, |
| {.bitrate = 540, .hw_value = 108, }, |
| }; |
| |
| /* Channel definitions to be advertised to cfg80211 */ |
| static struct ieee80211_channel mwifiex_channels_2ghz[] = { |
| {.center_freq = 2412, .hw_value = 1, }, |
| {.center_freq = 2417, .hw_value = 2, }, |
| {.center_freq = 2422, .hw_value = 3, }, |
| {.center_freq = 2427, .hw_value = 4, }, |
| {.center_freq = 2432, .hw_value = 5, }, |
| {.center_freq = 2437, .hw_value = 6, }, |
| {.center_freq = 2442, .hw_value = 7, }, |
| {.center_freq = 2447, .hw_value = 8, }, |
| {.center_freq = 2452, .hw_value = 9, }, |
| {.center_freq = 2457, .hw_value = 10, }, |
| {.center_freq = 2462, .hw_value = 11, }, |
| {.center_freq = 2467, .hw_value = 12, }, |
| {.center_freq = 2472, .hw_value = 13, }, |
| {.center_freq = 2484, .hw_value = 14, }, |
| }; |
| |
| static struct ieee80211_supported_band mwifiex_band_2ghz = { |
| .channels = mwifiex_channels_2ghz, |
| .n_channels = ARRAY_SIZE(mwifiex_channels_2ghz), |
| .bitrates = mwifiex_rates, |
| .n_bitrates = ARRAY_SIZE(mwifiex_rates), |
| }; |
| |
| static struct ieee80211_channel mwifiex_channels_5ghz[] = { |
| {.center_freq = 5040, .hw_value = 8, }, |
| {.center_freq = 5060, .hw_value = 12, }, |
| {.center_freq = 5080, .hw_value = 16, }, |
| {.center_freq = 5170, .hw_value = 34, }, |
| {.center_freq = 5190, .hw_value = 38, }, |
| {.center_freq = 5210, .hw_value = 42, }, |
| {.center_freq = 5230, .hw_value = 46, }, |
| {.center_freq = 5180, .hw_value = 36, }, |
| {.center_freq = 5200, .hw_value = 40, }, |
| {.center_freq = 5220, .hw_value = 44, }, |
| {.center_freq = 5240, .hw_value = 48, }, |
| {.center_freq = 5260, .hw_value = 52, }, |
| {.center_freq = 5280, .hw_value = 56, }, |
| {.center_freq = 5300, .hw_value = 60, }, |
| {.center_freq = 5320, .hw_value = 64, }, |
| {.center_freq = 5500, .hw_value = 100, }, |
| {.center_freq = 5520, .hw_value = 104, }, |
| {.center_freq = 5540, .hw_value = 108, }, |
| {.center_freq = 5560, .hw_value = 112, }, |
| {.center_freq = 5580, .hw_value = 116, }, |
| {.center_freq = 5600, .hw_value = 120, }, |
| {.center_freq = 5620, .hw_value = 124, }, |
| {.center_freq = 5640, .hw_value = 128, }, |
| {.center_freq = 5660, .hw_value = 132, }, |
| {.center_freq = 5680, .hw_value = 136, }, |
| {.center_freq = 5700, .hw_value = 140, }, |
| {.center_freq = 5745, .hw_value = 149, }, |
| {.center_freq = 5765, .hw_value = 153, }, |
| {.center_freq = 5785, .hw_value = 157, }, |
| {.center_freq = 5805, .hw_value = 161, }, |
| {.center_freq = 5825, .hw_value = 165, }, |
| }; |
| |
| static struct ieee80211_supported_band mwifiex_band_5ghz = { |
| .channels = mwifiex_channels_5ghz, |
| .n_channels = ARRAY_SIZE(mwifiex_channels_5ghz), |
| .bitrates = mwifiex_rates + 4, |
| .n_bitrates = ARRAY_SIZE(mwifiex_rates) - 4, |
| }; |
| |
| |
| /* Supported crypto cipher suits to be advertised to cfg80211 */ |
| static const u32 mwifiex_cipher_suites[] = { |
| WLAN_CIPHER_SUITE_WEP40, |
| WLAN_CIPHER_SUITE_WEP104, |
| WLAN_CIPHER_SUITE_TKIP, |
| WLAN_CIPHER_SUITE_CCMP, |
| WLAN_CIPHER_SUITE_SMS4, |
| WLAN_CIPHER_SUITE_AES_CMAC, |
| }; |
| |
| /* Supported mgmt frame types to be advertised to cfg80211 */ |
| static const struct ieee80211_txrx_stypes |
| mwifiex_mgmt_stypes[NUM_NL80211_IFTYPES] = { |
| [NL80211_IFTYPE_STATION] = { |
| .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| BIT(IEEE80211_STYPE_PROBE_RESP >> 4), |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), |
| }, |
| [NL80211_IFTYPE_AP] = { |
| .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| BIT(IEEE80211_STYPE_PROBE_RESP >> 4), |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), |
| }, |
| [NL80211_IFTYPE_P2P_CLIENT] = { |
| .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| BIT(IEEE80211_STYPE_PROBE_RESP >> 4), |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), |
| }, |
| [NL80211_IFTYPE_P2P_GO] = { |
| .tx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| BIT(IEEE80211_STYPE_PROBE_RESP >> 4), |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), |
| }, |
| }; |
| |
| /* |
| * CFG802.11 operation handler for setting bit rates. |
| * |
| * Function configures data rates to firmware using bitrate mask |
| * provided by cfg80211. |
| */ |
| static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy, |
| struct net_device *dev, |
| const u8 *peer, |
| const struct cfg80211_bitrate_mask *mask) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| u16 bitmap_rates[MAX_BITMAP_RATES_SIZE]; |
| enum nl80211_band band; |
| struct mwifiex_adapter *adapter = priv->adapter; |
| |
| if (!priv->media_connected) { |
| mwifiex_dbg(adapter, ERROR, |
| "Can not set Tx data rate in disconnected state\n"); |
| return -EINVAL; |
| } |
| |
| band = mwifiex_band_to_radio_type(priv->curr_bss_params.band); |
| |
| memset(bitmap_rates, 0, sizeof(bitmap_rates)); |
| |
| /* Fill HR/DSSS rates. */ |
| if (band == NL80211_BAND_2GHZ) |
| bitmap_rates[0] = mask->control[band].legacy & 0x000f; |
| |
| /* Fill OFDM rates */ |
| if (band == NL80211_BAND_2GHZ) |
| bitmap_rates[1] = (mask->control[band].legacy & 0x0ff0) >> 4; |
| else |
| bitmap_rates[1] = mask->control[band].legacy; |
| |
| /* Fill HT MCS rates */ |
| bitmap_rates[2] = mask->control[band].ht_mcs[0]; |
| if (adapter->hw_dev_mcs_support == HT_STREAM_2X2) |
| bitmap_rates[2] |= mask->control[band].ht_mcs[1] << 8; |
| |
| /* Fill VHT MCS rates */ |
| if (adapter->fw_api_ver == MWIFIEX_FW_V15) { |
| bitmap_rates[10] = mask->control[band].vht_mcs[0]; |
| if (adapter->hw_dev_mcs_support == HT_STREAM_2X2) |
| bitmap_rates[11] = mask->control[band].vht_mcs[1]; |
| } |
| |
| return mwifiex_send_cmd(priv, HostCmd_CMD_TX_RATE_CFG, |
| HostCmd_ACT_GEN_SET, 0, bitmap_rates, true); |
| } |
| |
| /* |
| * CFG802.11 operation handler for connection quality monitoring. |
| * |
| * This function subscribes/unsubscribes HIGH_RSSI and LOW_RSSI |
| * events to FW. |
| */ |
| static int mwifiex_cfg80211_set_cqm_rssi_config(struct wiphy *wiphy, |
| struct net_device *dev, |
| s32 rssi_thold, u32 rssi_hyst) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| struct mwifiex_ds_misc_subsc_evt subsc_evt; |
| |
| priv->cqm_rssi_thold = rssi_thold; |
| priv->cqm_rssi_hyst = rssi_hyst; |
| |
| memset(&subsc_evt, 0x00, sizeof(struct mwifiex_ds_misc_subsc_evt)); |
| subsc_evt.events = BITMASK_BCN_RSSI_LOW | BITMASK_BCN_RSSI_HIGH; |
| |
| /* Subscribe/unsubscribe low and high rssi events */ |
| if (rssi_thold && rssi_hyst) { |
| subsc_evt.action = HostCmd_ACT_BITWISE_SET; |
| subsc_evt.bcn_l_rssi_cfg.abs_value = abs(rssi_thold); |
| subsc_evt.bcn_h_rssi_cfg.abs_value = abs(rssi_thold); |
| subsc_evt.bcn_l_rssi_cfg.evt_freq = 1; |
| subsc_evt.bcn_h_rssi_cfg.evt_freq = 1; |
| return mwifiex_send_cmd(priv, |
| HostCmd_CMD_802_11_SUBSCRIBE_EVENT, |
| 0, 0, &subsc_evt, true); |
| } else { |
| subsc_evt.action = HostCmd_ACT_BITWISE_CLR; |
| return mwifiex_send_cmd(priv, |
| HostCmd_CMD_802_11_SUBSCRIBE_EVENT, |
| 0, 0, &subsc_evt, true); |
| } |
| |
| return 0; |
| } |
| |
| /* cfg80211 operation handler for change_beacon. |
| * Function retrieves and sets modified management IEs to FW. |
| */ |
| static int mwifiex_cfg80211_change_beacon(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_beacon_data *data) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| struct mwifiex_adapter *adapter = priv->adapter; |
| |
| mwifiex_cancel_scan(adapter); |
| |
| if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "%s: bss_type mismatched\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (!priv->bss_started) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "%s: bss not started\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (mwifiex_set_mgmt_ies(priv, data)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "%s: setting mgmt ies failed\n", __func__); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| /* cfg80211 operation handler for del_station. |
| * Function deauthenticates station which value is provided in mac parameter. |
| * If mac is NULL/broadcast, all stations in associated station list are |
| * deauthenticated. If bss is not started or there are no stations in |
| * associated stations list, no action is taken. |
| */ |
| static int |
| mwifiex_cfg80211_del_station(struct wiphy *wiphy, struct net_device *dev, |
| struct station_del_parameters *params) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| struct mwifiex_sta_node *sta_node; |
| u8 deauth_mac[ETH_ALEN]; |
| unsigned long flags; |
| |
| if (!priv->bss_started && priv->wdev.cac_started) { |
| mwifiex_dbg(priv->adapter, INFO, "%s: abort CAC!\n", __func__); |
| mwifiex_abort_cac(priv); |
| } |
| |
| if (list_empty(&priv->sta_list) || !priv->bss_started) |
| return 0; |
| |
| if (!params->mac || is_broadcast_ether_addr(params->mac)) |
| return 0; |
| |
| mwifiex_dbg(priv->adapter, INFO, "%s: mac address %pM\n", |
| __func__, params->mac); |
| |
| eth_zero_addr(deauth_mac); |
| |
| spin_lock_irqsave(&priv->sta_list_spinlock, flags); |
| sta_node = mwifiex_get_sta_entry(priv, params->mac); |
| if (sta_node) |
| ether_addr_copy(deauth_mac, params->mac); |
| spin_unlock_irqrestore(&priv->sta_list_spinlock, flags); |
| |
| if (is_valid_ether_addr(deauth_mac)) { |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_STA_DEAUTH, |
| HostCmd_ACT_GEN_SET, 0, |
| deauth_mac, true)) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| mwifiex_cfg80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| struct mwifiex_private *priv = mwifiex_get_priv(adapter, |
| MWIFIEX_BSS_ROLE_ANY); |
| struct mwifiex_ds_ant_cfg ant_cfg; |
| |
| if (!tx_ant || !rx_ant) |
| return -EOPNOTSUPP; |
| |
| if (adapter->hw_dev_mcs_support != HT_STREAM_2X2) { |
| /* Not a MIMO chip. User should provide specific antenna number |
| * for Tx/Rx path or enable all antennas for diversity |
| */ |
| if (tx_ant != rx_ant) |
| return -EOPNOTSUPP; |
| |
| if ((tx_ant & (tx_ant - 1)) && |
| (tx_ant != BIT(adapter->number_of_antenna) - 1)) |
| return -EOPNOTSUPP; |
| |
| if ((tx_ant == BIT(adapter->number_of_antenna) - 1) && |
| (priv->adapter->number_of_antenna > 1)) { |
| tx_ant = RF_ANTENNA_AUTO; |
| rx_ant = RF_ANTENNA_AUTO; |
| } |
| } else { |
| struct ieee80211_sta_ht_cap *ht_info; |
| int rx_mcs_supp; |
| enum nl80211_band band; |
| |
| if ((tx_ant == 0x1 && rx_ant == 0x1)) { |
| adapter->user_dev_mcs_support = HT_STREAM_1X1; |
| if (adapter->is_hw_11ac_capable) |
| adapter->usr_dot_11ac_mcs_support = |
| MWIFIEX_11AC_MCS_MAP_1X1; |
| } else { |
| adapter->user_dev_mcs_support = HT_STREAM_2X2; |
| if (adapter->is_hw_11ac_capable) |
| adapter->usr_dot_11ac_mcs_support = |
| MWIFIEX_11AC_MCS_MAP_2X2; |
| } |
| |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { |
| if (!adapter->wiphy->bands[band]) |
| continue; |
| |
| ht_info = &adapter->wiphy->bands[band]->ht_cap; |
| rx_mcs_supp = |
| GET_RXMCSSUPP(adapter->user_dev_mcs_support); |
| memset(&ht_info->mcs, 0, adapter->number_of_antenna); |
| memset(&ht_info->mcs, 0xff, rx_mcs_supp); |
| } |
| } |
| |
| ant_cfg.tx_ant = tx_ant; |
| ant_cfg.rx_ant = rx_ant; |
| |
| return mwifiex_send_cmd(priv, HostCmd_CMD_RF_ANTENNA, |
| HostCmd_ACT_GEN_SET, 0, &ant_cfg, true); |
| } |
| |
| static int |
| mwifiex_cfg80211_get_antenna(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| struct mwifiex_private *priv = mwifiex_get_priv(adapter, |
| MWIFIEX_BSS_ROLE_ANY); |
| mwifiex_send_cmd(priv, HostCmd_CMD_RF_ANTENNA, |
| HostCmd_ACT_GEN_GET, 0, NULL, true); |
| |
| *tx_ant = priv->tx_ant; |
| *rx_ant = priv->rx_ant; |
| |
| return 0; |
| } |
| |
| /* cfg80211 operation handler for stop ap. |
| * Function stops BSS running at uAP interface. |
| */ |
| static int mwifiex_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| mwifiex_abort_cac(priv); |
| |
| if (mwifiex_del_mgmt_ies(priv)) |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Failed to delete mgmt IEs!\n"); |
| |
| priv->ap_11n_enabled = 0; |
| memset(&priv->bss_cfg, 0, sizeof(priv->bss_cfg)); |
| |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP, |
| HostCmd_ACT_GEN_SET, 0, NULL, true)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Failed to stop the BSS\n"); |
| return -1; |
| } |
| |
| if (mwifiex_send_cmd(priv, HOST_CMD_APCMD_SYS_RESET, |
| HostCmd_ACT_GEN_SET, 0, NULL, true)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Failed to reset BSS\n"); |
| return -1; |
| } |
| |
| if (netif_carrier_ok(priv->netdev)) |
| netif_carrier_off(priv->netdev); |
| mwifiex_stop_net_dev_queue(priv->netdev, priv->adapter); |
| |
| return 0; |
| } |
| |
| /* cfg80211 operation handler for start_ap. |
| * Function sets beacon period, DTIM period, SSID and security into |
| * AP config structure. |
| * AP is configured with these settings and BSS is started. |
| */ |
| static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_ap_settings *params) |
| { |
| struct mwifiex_uap_bss_param *bss_cfg; |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP) |
| return -1; |
| |
| bss_cfg = kzalloc(sizeof(struct mwifiex_uap_bss_param), GFP_KERNEL); |
| if (!bss_cfg) |
| return -ENOMEM; |
| |
| mwifiex_set_sys_config_invalid_data(bss_cfg); |
| |
| if (params->beacon_interval) |
| bss_cfg->beacon_period = params->beacon_interval; |
| if (params->dtim_period) |
| bss_cfg->dtim_period = params->dtim_period; |
| |
| if (params->ssid && params->ssid_len) { |
| memcpy(bss_cfg->ssid.ssid, params->ssid, params->ssid_len); |
| bss_cfg->ssid.ssid_len = params->ssid_len; |
| } |
| if (params->inactivity_timeout > 0) { |
| /* sta_ao_timer/ps_sta_ao_timer is in unit of 100ms */ |
| bss_cfg->sta_ao_timer = 10 * params->inactivity_timeout; |
| bss_cfg->ps_sta_ao_timer = 10 * params->inactivity_timeout; |
| } |
| |
| switch (params->hidden_ssid) { |
| case NL80211_HIDDEN_SSID_NOT_IN_USE: |
| bss_cfg->bcast_ssid_ctl = 1; |
| break; |
| case NL80211_HIDDEN_SSID_ZERO_LEN: |
| bss_cfg->bcast_ssid_ctl = 0; |
| break; |
| case NL80211_HIDDEN_SSID_ZERO_CONTENTS: |
| /* firmware doesn't support this type of hidden SSID */ |
| default: |
| kfree(bss_cfg); |
| return -EINVAL; |
| } |
| |
| mwifiex_uap_set_channel(priv, bss_cfg, params->chandef); |
| mwifiex_set_uap_rates(bss_cfg, params); |
| |
| if (mwifiex_set_secure_params(priv, bss_cfg, params)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Failed to parse secuirty parameters!\n"); |
| goto out; |
| } |
| |
| mwifiex_set_ht_params(priv, bss_cfg, params); |
| |
| if (priv->adapter->is_hw_11ac_capable) { |
| mwifiex_set_vht_params(priv, bss_cfg, params); |
| mwifiex_set_vht_width(priv, params->chandef.width, |
| priv->ap_11ac_enabled); |
| } |
| |
| if (priv->ap_11ac_enabled) |
| mwifiex_set_11ac_ba_params(priv); |
| else |
| mwifiex_set_ba_params(priv); |
| |
| mwifiex_set_wmm_params(priv, bss_cfg, params); |
| |
| if (mwifiex_is_11h_active(priv)) |
| mwifiex_set_tpc_params(priv, bss_cfg, params); |
| |
| if (mwifiex_is_11h_active(priv) && |
| !cfg80211_chandef_dfs_required(wiphy, ¶ms->chandef, |
| priv->bss_mode)) { |
| mwifiex_dbg(priv->adapter, INFO, |
| "Disable 11h extensions in FW\n"); |
| if (mwifiex_11h_activate(priv, false)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Failed to disable 11h extensions!!"); |
| goto out; |
| } |
| priv->state_11h.is_11h_active = false; |
| } |
| |
| if (mwifiex_config_start_uap(priv, bss_cfg)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Failed to start AP\n"); |
| goto out; |
| } |
| |
| if (mwifiex_set_mgmt_ies(priv, ¶ms->beacon)) |
| goto out; |
| |
| if (!netif_carrier_ok(priv->netdev)) |
| netif_carrier_on(priv->netdev); |
| mwifiex_wake_up_net_dev_queue(priv->netdev, priv->adapter); |
| |
| memcpy(&priv->bss_cfg, bss_cfg, sizeof(priv->bss_cfg)); |
| kfree(bss_cfg); |
| return 0; |
| |
| out: |
| kfree(bss_cfg); |
| return -1; |
| } |
| |
| /* |
| * CFG802.11 operation handler for disconnection request. |
| * |
| * This function does not work when there is already a disconnection |
| * procedure going on. |
| */ |
| static int |
| mwifiex_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev, |
| u16 reason_code) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| if (!mwifiex_stop_bg_scan(priv)) |
| cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy); |
| |
| if (mwifiex_deauthenticate(priv, NULL)) |
| return -EFAULT; |
| |
| eth_zero_addr(priv->cfg_bssid); |
| priv->hs2_enabled = false; |
| |
| return 0; |
| } |
| |
| /* |
| * This function informs the CFG802.11 subsystem of a new IBSS. |
| * |
| * The following information are sent to the CFG802.11 subsystem |
| * to register the new IBSS. If we do not register the new IBSS, |
| * a kernel panic will result. |
| * - SSID |
| * - SSID length |
| * - BSSID |
| * - Channel |
| */ |
| static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv) |
| { |
| struct ieee80211_channel *chan; |
| struct mwifiex_bss_info bss_info; |
| struct cfg80211_bss *bss; |
| int ie_len; |
| u8 ie_buf[IEEE80211_MAX_SSID_LEN + sizeof(struct ieee_types_header)]; |
| enum nl80211_band band; |
| |
| if (mwifiex_get_bss_info(priv, &bss_info)) |
| return -1; |
| |
| ie_buf[0] = WLAN_EID_SSID; |
| ie_buf[1] = bss_info.ssid.ssid_len; |
| |
| memcpy(&ie_buf[sizeof(struct ieee_types_header)], |
| &bss_info.ssid.ssid, bss_info.ssid.ssid_len); |
| ie_len = ie_buf[1] + sizeof(struct ieee_types_header); |
| |
| band = mwifiex_band_to_radio_type(priv->curr_bss_params.band); |
| chan = __ieee80211_get_channel(priv->wdev.wiphy, |
| ieee80211_channel_to_frequency(bss_info.bss_chan, |
| band)); |
| |
| bss = cfg80211_inform_bss(priv->wdev.wiphy, chan, |
| CFG80211_BSS_FTYPE_UNKNOWN, |
| bss_info.bssid, 0, WLAN_CAPABILITY_IBSS, |
| 0, ie_buf, ie_len, 0, GFP_KERNEL); |
| if (bss) { |
| cfg80211_put_bss(priv->wdev.wiphy, bss); |
| ether_addr_copy(priv->cfg_bssid, bss_info.bssid); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function connects with a BSS. |
| * |
| * This function handles both Infra and Ad-Hoc modes. It also performs |
| * validity checking on the provided parameters, disconnects from the |
| * current BSS (if any), sets up the association/scan parameters, |
| * including security settings, and performs specific SSID scan before |
| * trying to connect. |
| * |
| * For Infra mode, the function returns failure if the specified SSID |
| * is not found in scan table. However, for Ad-Hoc mode, it can create |
| * the IBSS if it does not exist. On successful completion in either case, |
| * the function notifies the CFG802.11 subsystem of the new BSS connection. |
| */ |
| static int |
| mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, |
| const u8 *ssid, const u8 *bssid, int mode, |
| struct ieee80211_channel *channel, |
| struct cfg80211_connect_params *sme, bool privacy) |
| { |
| struct cfg80211_ssid req_ssid; |
| int ret, auth_type = 0; |
| struct cfg80211_bss *bss = NULL; |
| u8 is_scanning_required = 0; |
| |
| memset(&req_ssid, 0, sizeof(struct cfg80211_ssid)); |
| |
| req_ssid.ssid_len = ssid_len; |
| if (ssid_len > IEEE80211_MAX_SSID_LEN) { |
| mwifiex_dbg(priv->adapter, ERROR, "invalid SSID - aborting\n"); |
| return -EINVAL; |
| } |
| |
| memcpy(req_ssid.ssid, ssid, ssid_len); |
| if (!req_ssid.ssid_len || req_ssid.ssid[0] < 0x20) { |
| mwifiex_dbg(priv->adapter, ERROR, "invalid SSID - aborting\n"); |
| return -EINVAL; |
| } |
| |
| /* As this is new association, clear locally stored |
| * keys and security related flags */ |
| priv->sec_info.wpa_enabled = false; |
| priv->sec_info.wpa2_enabled = false; |
| priv->wep_key_curr_index = 0; |
| priv->sec_info.encryption_mode = 0; |
| priv->sec_info.is_authtype_auto = 0; |
| ret = mwifiex_set_encode(priv, NULL, NULL, 0, 0, NULL, 1); |
| |
| if (mode == NL80211_IFTYPE_ADHOC) { |
| /* "privacy" is set only for ad-hoc mode */ |
| if (privacy) { |
| /* |
| * Keep WLAN_CIPHER_SUITE_WEP104 for now so that |
| * the firmware can find a matching network from the |
| * scan. The cfg80211 does not give us the encryption |
| * mode at this stage so just setting it to WEP here. |
| */ |
| priv->sec_info.encryption_mode = |
| WLAN_CIPHER_SUITE_WEP104; |
| priv->sec_info.authentication_mode = |
| NL80211_AUTHTYPE_OPEN_SYSTEM; |
| } |
| |
| goto done; |
| } |
| |
| /* Now handle infra mode. "sme" is valid for infra mode only */ |
| if (sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC) { |
| auth_type = NL80211_AUTHTYPE_OPEN_SYSTEM; |
| priv->sec_info.is_authtype_auto = 1; |
| } else { |
| auth_type = sme->auth_type; |
| } |
| |
| if (sme->crypto.n_ciphers_pairwise) { |
| priv->sec_info.encryption_mode = |
| sme->crypto.ciphers_pairwise[0]; |
| priv->sec_info.authentication_mode = auth_type; |
| } |
| |
| if (sme->crypto.cipher_group) { |
| priv->sec_info.encryption_mode = sme->crypto.cipher_group; |
| priv->sec_info.authentication_mode = auth_type; |
| } |
| if (sme->ie) |
| ret = mwifiex_set_gen_ie(priv, sme->ie, sme->ie_len); |
| |
| if (sme->key) { |
| if (mwifiex_is_alg_wep(priv->sec_info.encryption_mode)) { |
| mwifiex_dbg(priv->adapter, INFO, |
| "info: setting wep encryption\t" |
| "with key len %d\n", sme->key_len); |
| priv->wep_key_curr_index = sme->key_idx; |
| ret = mwifiex_set_encode(priv, NULL, sme->key, |
| sme->key_len, sme->key_idx, |
| NULL, 0); |
| } |
| } |
| done: |
| /* |
| * Scan entries are valid for some time (15 sec). So we can save one |
| * active scan time if we just try cfg80211_get_bss first. If it fails |
| * then request scan and cfg80211_get_bss() again for final output. |
| */ |
| while (1) { |
| if (is_scanning_required) { |
| /* Do specific SSID scanning */ |
| if (mwifiex_request_scan(priv, &req_ssid)) { |
| mwifiex_dbg(priv->adapter, ERROR, "scan error\n"); |
| return -EFAULT; |
| } |
| } |
| |
| /* Find the BSS we want using available scan results */ |
| if (mode == NL80211_IFTYPE_ADHOC) |
| bss = cfg80211_get_bss(priv->wdev.wiphy, channel, |
| bssid, ssid, ssid_len, |
| IEEE80211_BSS_TYPE_IBSS, |
| IEEE80211_PRIVACY_ANY); |
| else |
| bss = cfg80211_get_bss(priv->wdev.wiphy, channel, |
| bssid, ssid, ssid_len, |
| IEEE80211_BSS_TYPE_ESS, |
| IEEE80211_PRIVACY_ANY); |
| |
| if (!bss) { |
| if (is_scanning_required) { |
| mwifiex_dbg(priv->adapter, WARN, |
| "assoc: requested bss not found in scan results\n"); |
| break; |
| } |
| is_scanning_required = 1; |
| } else { |
| mwifiex_dbg(priv->adapter, MSG, |
| "info: trying to associate to '%.*s' bssid %pM\n", |
| req_ssid.ssid_len, (char *)req_ssid.ssid, |
| bss->bssid); |
| memcpy(&priv->cfg_bssid, bss->bssid, ETH_ALEN); |
| break; |
| } |
| } |
| |
| ret = mwifiex_bss_start(priv, bss, &req_ssid); |
| if (ret) |
| return ret; |
| |
| if (mode == NL80211_IFTYPE_ADHOC) { |
| /* Inform the BSS information to kernel, otherwise |
| * kernel will give a panic after successful assoc */ |
| if (mwifiex_cfg80211_inform_ibss_bss(priv)) |
| return -EFAULT; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * CFG802.11 operation handler for association request. |
| * |
| * This function does not work when the current mode is set to Ad-Hoc, or |
| * when there is already an association procedure going on. The given BSS |
| * information is used to associate. |
| */ |
| static int |
| mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_connect_params *sme) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| struct mwifiex_adapter *adapter = priv->adapter; |
| int ret; |
| |
| if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: reject infra assoc request in non-STA role\n", |
| dev->name); |
| return -EINVAL; |
| } |
| |
| if (priv->wdev.current_bss) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: already connected\n", dev->name); |
| return -EALREADY; |
| } |
| |
| if (priv->scan_block) |
| priv->scan_block = false; |
| |
| if (adapter->surprise_removed || adapter->is_cmd_timedout) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: Ignore connection.\t" |
| "Card removed or FW in bad state\n", |
| dev->name); |
| return -EFAULT; |
| } |
| |
| mwifiex_dbg(adapter, INFO, |
| "info: Trying to associate to %.*s and bssid %pM\n", |
| (int)sme->ssid_len, (char *)sme->ssid, sme->bssid); |
| |
| if (!mwifiex_stop_bg_scan(priv)) |
| cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy); |
| |
| ret = mwifiex_cfg80211_assoc(priv, sme->ssid_len, sme->ssid, sme->bssid, |
| priv->bss_mode, sme->channel, sme, 0); |
| if (!ret) { |
| cfg80211_connect_result(priv->netdev, priv->cfg_bssid, NULL, 0, |
| NULL, 0, WLAN_STATUS_SUCCESS, |
| GFP_KERNEL); |
| mwifiex_dbg(priv->adapter, MSG, |
| "info: associated to bssid %pM successfully\n", |
| priv->cfg_bssid); |
| if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && |
| priv->adapter->auto_tdls && |
| priv->bss_type == MWIFIEX_BSS_TYPE_STA) |
| mwifiex_setup_auto_tdls_timer(priv); |
| } else { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "info: association to bssid %pM failed\n", |
| priv->cfg_bssid); |
| eth_zero_addr(priv->cfg_bssid); |
| |
| if (ret > 0) |
| cfg80211_connect_result(priv->netdev, priv->cfg_bssid, |
| NULL, 0, NULL, 0, ret, |
| GFP_KERNEL); |
| else |
| cfg80211_connect_result(priv->netdev, priv->cfg_bssid, |
| NULL, 0, NULL, 0, |
| WLAN_STATUS_UNSPECIFIED_FAILURE, |
| GFP_KERNEL); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function sets following parameters for ibss network. |
| * - channel |
| * - start band |
| * - 11n flag |
| * - secondary channel offset |
| */ |
| static int mwifiex_set_ibss_params(struct mwifiex_private *priv, |
| struct cfg80211_ibss_params *params) |
| { |
| struct mwifiex_adapter *adapter = priv->adapter; |
| int index = 0, i; |
| u8 config_bands = 0; |
| |
| if (params->chandef.chan->band == NL80211_BAND_2GHZ) { |
| if (!params->basic_rates) { |
| config_bands = BAND_B | BAND_G; |
| } else { |
| for (i = 0; i < mwifiex_band_2ghz.n_bitrates; i++) { |
| /* |
| * Rates below 6 Mbps in the table are CCK |
| * rates; 802.11b and from 6 they are OFDM; |
| * 802.11G |
| */ |
| if (mwifiex_rates[i].bitrate == 60) { |
| index = 1 << i; |
| break; |
| } |
| } |
| |
| if (params->basic_rates < index) { |
| config_bands = BAND_B; |
| } else { |
| config_bands = BAND_G; |
| if (params->basic_rates % index) |
| config_bands |= BAND_B; |
| } |
| } |
| |
| if (cfg80211_get_chandef_type(¶ms->chandef) != |
| NL80211_CHAN_NO_HT) |
| config_bands |= BAND_G | BAND_GN; |
| } else { |
| if (cfg80211_get_chandef_type(¶ms->chandef) == |
| NL80211_CHAN_NO_HT) |
| config_bands = BAND_A; |
| else |
| config_bands = BAND_AN | BAND_A; |
| } |
| |
| if (!((config_bands | adapter->fw_bands) & ~adapter->fw_bands)) { |
| adapter->config_bands = config_bands; |
| adapter->adhoc_start_band = config_bands; |
| |
| if ((config_bands & BAND_GN) || (config_bands & BAND_AN)) |
| adapter->adhoc_11n_enabled = true; |
| else |
| adapter->adhoc_11n_enabled = false; |
| } |
| |
| adapter->sec_chan_offset = |
| mwifiex_chan_type_to_sec_chan_offset( |
| cfg80211_get_chandef_type(¶ms->chandef)); |
| priv->adhoc_channel = ieee80211_frequency_to_channel( |
| params->chandef.chan->center_freq); |
| |
| mwifiex_dbg(adapter, INFO, |
| "info: set ibss band %d, chan %d, chan offset %d\n", |
| config_bands, priv->adhoc_channel, |
| adapter->sec_chan_offset); |
| |
| return 0; |
| } |
| |
| /* |
| * CFG802.11 operation handler to join an IBSS. |
| * |
| * This function does not work in any mode other than Ad-Hoc, or if |
| * a join operation is already in progress. |
| */ |
| static int |
| mwifiex_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_ibss_params *params) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| int ret = 0; |
| |
| if (priv->bss_mode != NL80211_IFTYPE_ADHOC) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "request to join ibss received\t" |
| "when station is not in ibss mode\n"); |
| goto done; |
| } |
| |
| mwifiex_dbg(priv->adapter, MSG, |
| "info: trying to join to %.*s and bssid %pM\n", |
| params->ssid_len, (char *)params->ssid, params->bssid); |
| |
| mwifiex_set_ibss_params(priv, params); |
| |
| ret = mwifiex_cfg80211_assoc(priv, params->ssid_len, params->ssid, |
| params->bssid, priv->bss_mode, |
| params->chandef.chan, NULL, |
| params->privacy); |
| done: |
| if (!ret) { |
| cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid, |
| params->chandef.chan, GFP_KERNEL); |
| mwifiex_dbg(priv->adapter, MSG, |
| "info: joined/created adhoc network with bssid\t" |
| "%pM successfully\n", priv->cfg_bssid); |
| } else { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "info: failed creating/joining adhoc network\n"); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * CFG802.11 operation handler to leave an IBSS. |
| * |
| * This function does not work if a leave operation is |
| * already in progress. |
| */ |
| static int |
| mwifiex_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| mwifiex_dbg(priv->adapter, MSG, "info: disconnecting from essid %pM\n", |
| priv->cfg_bssid); |
| if (mwifiex_deauthenticate(priv, NULL)) |
| return -EFAULT; |
| |
| eth_zero_addr(priv->cfg_bssid); |
| |
| return 0; |
| } |
| |
| /* |
| * CFG802.11 operation handler for scan request. |
| * |
| * This function issues a scan request to the firmware based upon |
| * the user specified scan configuration. On successful completion, |
| * it also informs the results. |
| */ |
| static int |
| mwifiex_cfg80211_scan(struct wiphy *wiphy, |
| struct cfg80211_scan_request *request) |
| { |
| struct net_device *dev = request->wdev->netdev; |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| int i, offset, ret; |
| struct ieee80211_channel *chan; |
| struct ieee_types_header *ie; |
| struct mwifiex_user_scan_cfg *user_scan_cfg; |
| |
| mwifiex_dbg(priv->adapter, CMD, |
| "info: received scan request on %s\n", dev->name); |
| |
| /* Block scan request if scan operation or scan cleanup when interface |
| * is disabled is in process |
| */ |
| if (priv->scan_request || priv->scan_aborting) { |
| mwifiex_dbg(priv->adapter, WARN, |
| "cmd: Scan already in process..\n"); |
| return -EBUSY; |
| } |
| |
| if (!priv->wdev.current_bss && priv->scan_block) |
| priv->scan_block = false; |
| |
| if (!mwifiex_stop_bg_scan(priv)) |
| cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy); |
| |
| user_scan_cfg = kzalloc(sizeof(*user_scan_cfg), GFP_KERNEL); |
| if (!user_scan_cfg) |
| return -ENOMEM; |
| |
| priv->scan_request = request; |
| |
| if (request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) { |
| ether_addr_copy(priv->random_mac, request->mac_addr); |
| for (i = 0; i < ETH_ALEN; i++) { |
| priv->random_mac[i] &= request->mac_addr_mask[i]; |
| priv->random_mac[i] |= get_random_int() & |
| ~(request->mac_addr_mask[i]); |
| } |
| ether_addr_copy(user_scan_cfg->random_mac, priv->random_mac); |
| } else { |
| eth_zero_addr(priv->random_mac); |
| } |
| |
| user_scan_cfg->num_ssids = request->n_ssids; |
| user_scan_cfg->ssid_list = request->ssids; |
| |
| if (request->ie && request->ie_len) { |
| offset = 0; |
| for (i = 0; i < MWIFIEX_MAX_VSIE_NUM; i++) { |
| if (priv->vs_ie[i].mask != MWIFIEX_VSIE_MASK_CLEAR) |
| continue; |
| priv->vs_ie[i].mask = MWIFIEX_VSIE_MASK_SCAN; |
| ie = (struct ieee_types_header *)(request->ie + offset); |
| memcpy(&priv->vs_ie[i].ie, ie, sizeof(*ie) + ie->len); |
| offset += sizeof(*ie) + ie->len; |
| |
| if (offset >= request->ie_len) |
| break; |
| } |
| } |
| |
| for (i = 0; i < min_t(u32, request->n_channels, |
| MWIFIEX_USER_SCAN_CHAN_MAX); i++) { |
| chan = request->channels[i]; |
| user_scan_cfg->chan_list[i].chan_number = chan->hw_value; |
| user_scan_cfg->chan_list[i].radio_type = chan->band; |
| |
| if ((chan->flags & IEEE80211_CHAN_NO_IR) || !request->n_ssids) |
| user_scan_cfg->chan_list[i].scan_type = |
| MWIFIEX_SCAN_TYPE_PASSIVE; |
| else |
| user_scan_cfg->chan_list[i].scan_type = |
| MWIFIEX_SCAN_TYPE_ACTIVE; |
| |
| user_scan_cfg->chan_list[i].scan_time = 0; |
| } |
| |
| if (priv->adapter->scan_chan_gap_enabled && |
| mwifiex_is_any_intf_active(priv)) |
| user_scan_cfg->scan_chan_gap = |
| priv->adapter->scan_chan_gap_time; |
| |
| ret = mwifiex_scan_networks(priv, user_scan_cfg); |
| kfree(user_scan_cfg); |
| if (ret) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "scan failed: %d\n", ret); |
| priv->scan_aborting = false; |
| priv->scan_request = NULL; |
| return ret; |
| } |
| |
| if (request->ie && request->ie_len) { |
| for (i = 0; i < MWIFIEX_MAX_VSIE_NUM; i++) { |
| if (priv->vs_ie[i].mask == MWIFIEX_VSIE_MASK_SCAN) { |
| priv->vs_ie[i].mask = MWIFIEX_VSIE_MASK_CLEAR; |
| memset(&priv->vs_ie[i].ie, 0, |
| MWIFIEX_MAX_VSIE_LEN); |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /* CFG802.11 operation handler for sched_scan_start. |
| * |
| * This function issues a bgscan config request to the firmware based upon |
| * the user specified sched_scan configuration. On successful completion, |
| * firmware will generate BGSCAN_REPORT event, driver should issue bgscan |
| * query command to get sched_scan results from firmware. |
| */ |
| static int |
| mwifiex_cfg80211_sched_scan_start(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_sched_scan_request *request) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| int i, offset; |
| struct ieee80211_channel *chan; |
| struct mwifiex_bg_scan_cfg *bgscan_cfg; |
| struct ieee_types_header *ie; |
| |
| if (!request || (!request->n_ssids && !request->n_match_sets)) { |
| wiphy_err(wiphy, "%s : Invalid Sched_scan parameters", |
| __func__); |
| return -EINVAL; |
| } |
| |
| wiphy_info(wiphy, "sched_scan start : n_ssids=%d n_match_sets=%d ", |
| request->n_ssids, request->n_match_sets); |
| wiphy_info(wiphy, "n_channels=%d interval=%d ie_len=%d\n", |
| request->n_channels, request->scan_plans->interval, |
| (int)request->ie_len); |
| |
| bgscan_cfg = kzalloc(sizeof(*bgscan_cfg), GFP_KERNEL); |
| if (!bgscan_cfg) |
| return -ENOMEM; |
| |
| if (priv->scan_request || priv->scan_aborting) |
| bgscan_cfg->start_later = true; |
| |
| bgscan_cfg->num_ssids = request->n_match_sets; |
| bgscan_cfg->ssid_list = request->match_sets; |
| |
| if (request->ie && request->ie_len) { |
| offset = 0; |
| for (i = 0; i < MWIFIEX_MAX_VSIE_NUM; i++) { |
| if (priv->vs_ie[i].mask != MWIFIEX_VSIE_MASK_CLEAR) |
| continue; |
| priv->vs_ie[i].mask = MWIFIEX_VSIE_MASK_BGSCAN; |
| ie = (struct ieee_types_header *)(request->ie + offset); |
| memcpy(&priv->vs_ie[i].ie, ie, sizeof(*ie) + ie->len); |
| offset += sizeof(*ie) + ie->len; |
| |
| if (offset >= request->ie_len) |
| break; |
| } |
| } |
| |
| for (i = 0; i < min_t(u32, request->n_channels, |
| MWIFIEX_BG_SCAN_CHAN_MAX); i++) { |
| chan = request->channels[i]; |
| bgscan_cfg->chan_list[i].chan_number = chan->hw_value; |
| bgscan_cfg->chan_list[i].radio_type = chan->band; |
| |
| if ((chan->flags & IEEE80211_CHAN_NO_IR) || !request->n_ssids) |
| bgscan_cfg->chan_list[i].scan_type = |
| MWIFIEX_SCAN_TYPE_PASSIVE; |
| else |
| bgscan_cfg->chan_list[i].scan_type = |
| MWIFIEX_SCAN_TYPE_ACTIVE; |
| |
| bgscan_cfg->chan_list[i].scan_time = 0; |
| } |
| |
| bgscan_cfg->chan_per_scan = min_t(u32, request->n_channels, |
| MWIFIEX_BG_SCAN_CHAN_MAX); |
| |
| /* Use at least 15 second for per scan cycle */ |
| bgscan_cfg->scan_interval = (request->scan_plans->interval > |
| MWIFIEX_BGSCAN_INTERVAL) ? |
| request->scan_plans->interval : |
| MWIFIEX_BGSCAN_INTERVAL; |
| |
| bgscan_cfg->repeat_count = MWIFIEX_BGSCAN_REPEAT_COUNT; |
| bgscan_cfg->report_condition = MWIFIEX_BGSCAN_SSID_MATCH | |
| MWIFIEX_BGSCAN_WAIT_ALL_CHAN_DONE; |
| bgscan_cfg->bss_type = MWIFIEX_BSS_MODE_INFRA; |
| bgscan_cfg->action = MWIFIEX_BGSCAN_ACT_SET; |
| bgscan_cfg->enable = true; |
| if (request->min_rssi_thold != NL80211_SCAN_RSSI_THOLD_OFF) { |
| bgscan_cfg->report_condition |= MWIFIEX_BGSCAN_SSID_RSSI_MATCH; |
| bgscan_cfg->rssi_threshold = request->min_rssi_thold; |
| } |
| |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_802_11_BG_SCAN_CONFIG, |
| HostCmd_ACT_GEN_SET, 0, bgscan_cfg, true)) { |
| kfree(bgscan_cfg); |
| return -EFAULT; |
| } |
| |
| priv->sched_scanning = true; |
| |
| kfree(bgscan_cfg); |
| return 0; |
| } |
| |
| /* CFG802.11 operation handler for sched_scan_stop. |
| * |
| * This function issues a bgscan config command to disable |
| * previous bgscan configuration in the firmware |
| */ |
| static int mwifiex_cfg80211_sched_scan_stop(struct wiphy *wiphy, |
| struct net_device *dev) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| wiphy_info(wiphy, "sched scan stop!"); |
| mwifiex_stop_bg_scan(priv); |
| |
| return 0; |
| } |
| |
| static void mwifiex_setup_vht_caps(struct ieee80211_sta_vht_cap *vht_info, |
| struct mwifiex_private *priv) |
| { |
| struct mwifiex_adapter *adapter = priv->adapter; |
| |
| vht_info->vht_supported = true; |
| |
| vht_info->cap = adapter->hw_dot_11ac_dev_cap; |
| /* Update MCS support for VHT */ |
| vht_info->vht_mcs.rx_mcs_map = cpu_to_le16( |
| adapter->hw_dot_11ac_mcs_support & 0xFFFF); |
| vht_info->vht_mcs.rx_highest = 0; |
| vht_info->vht_mcs.tx_mcs_map = cpu_to_le16( |
| adapter->hw_dot_11ac_mcs_support >> 16); |
| vht_info->vht_mcs.tx_highest = 0; |
| } |
| |
| /* |
| * This function sets up the CFG802.11 specific HT capability fields |
| * with default values. |
| * |
| * The following default values are set - |
| * - HT Supported = True |
| * - Maximum AMPDU length factor = IEEE80211_HT_MAX_AMPDU_64K |
| * - Minimum AMPDU spacing = IEEE80211_HT_MPDU_DENSITY_NONE |
| * - HT Capabilities supported by firmware |
| * - MCS information, Rx mask = 0xff |
| * - MCD information, Tx parameters = IEEE80211_HT_MCS_TX_DEFINED (0x01) |
| */ |
| static void |
| mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info, |
| struct mwifiex_private *priv) |
| { |
| int rx_mcs_supp; |
| struct ieee80211_mcs_info mcs_set; |
| u8 *mcs = (u8 *)&mcs_set; |
| struct mwifiex_adapter *adapter = priv->adapter; |
| |
| ht_info->ht_supported = true; |
| ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; |
| ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE; |
| |
| memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); |
| |
| /* Fill HT capability information */ |
| if (ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap)) |
| ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| else |
| ht_info->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| |
| if (ISSUPP_SHORTGI20(adapter->hw_dot_11n_dev_cap)) |
| ht_info->cap |= IEEE80211_HT_CAP_SGI_20; |
| else |
| ht_info->cap &= ~IEEE80211_HT_CAP_SGI_20; |
| |
| if (ISSUPP_SHORTGI40(adapter->hw_dot_11n_dev_cap)) |
| ht_info->cap |= IEEE80211_HT_CAP_SGI_40; |
| else |
| ht_info->cap &= ~IEEE80211_HT_CAP_SGI_40; |
| |
| if (adapter->user_dev_mcs_support == HT_STREAM_2X2) |
| ht_info->cap |= 2 << IEEE80211_HT_CAP_RX_STBC_SHIFT; |
| else |
| ht_info->cap |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT; |
| |
| if (ISSUPP_TXSTBC(adapter->hw_dot_11n_dev_cap)) |
| ht_info->cap |= IEEE80211_HT_CAP_TX_STBC; |
| else |
| ht_info->cap &= ~IEEE80211_HT_CAP_TX_STBC; |
| |
| if (ISSUPP_GREENFIELD(adapter->hw_dot_11n_dev_cap)) |
| ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD; |
| else |
| ht_info->cap &= ~IEEE80211_HT_CAP_GRN_FLD; |
| |
| if (ISENABLED_40MHZ_INTOLERANT(adapter->hw_dot_11n_dev_cap)) |
| ht_info->cap |= IEEE80211_HT_CAP_40MHZ_INTOLERANT; |
| else |
| ht_info->cap &= ~IEEE80211_HT_CAP_40MHZ_INTOLERANT; |
| |
| if (ISSUPP_RXLDPC(adapter->hw_dot_11n_dev_cap)) |
| ht_info->cap |= IEEE80211_HT_CAP_LDPC_CODING; |
| else |
| ht_info->cap &= ~IEEE80211_HT_CAP_LDPC_CODING; |
| |
| ht_info->cap &= ~IEEE80211_HT_CAP_MAX_AMSDU; |
| ht_info->cap |= IEEE80211_HT_CAP_SM_PS; |
| |
| rx_mcs_supp = GET_RXMCSSUPP(adapter->user_dev_mcs_support); |
| /* Set MCS for 1x1/2x2 */ |
| memset(mcs, 0xff, rx_mcs_supp); |
| /* Clear all the other values */ |
| memset(&mcs[rx_mcs_supp], 0, |
| sizeof(struct ieee80211_mcs_info) - rx_mcs_supp); |
| if (priv->bss_mode == NL80211_IFTYPE_STATION || |
| ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap)) |
| /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */ |
| SETHT_MCS32(mcs_set.rx_mask); |
| |
| memcpy((u8 *) &ht_info->mcs, mcs, sizeof(struct ieee80211_mcs_info)); |
| |
| ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; |
| } |
| |
| /* |
| * create a new virtual interface with the given name and name assign type |
| */ |
| struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy, |
| const char *name, |
| unsigned char name_assign_type, |
| enum nl80211_iftype type, |
| u32 *flags, |
| struct vif_params *params) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| struct mwifiex_private *priv; |
| struct net_device *dev; |
| void *mdev_priv; |
| int ret; |
| |
| if (!adapter) |
| return ERR_PTR(-EFAULT); |
| |
| switch (type) { |
| case NL80211_IFTYPE_UNSPECIFIED: |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_ADHOC: |
| if (adapter->curr_iface_comb.sta_intf == |
| adapter->iface_limit.sta_intf) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot create multiple sta/adhoc ifaces\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| priv = mwifiex_get_unused_priv_by_bss_type( |
| adapter, MWIFIEX_BSS_TYPE_STA); |
| if (!priv) { |
| mwifiex_dbg(adapter, ERROR, |
| "could not get free private struct\n"); |
| return ERR_PTR(-EFAULT); |
| } |
| |
| priv->wdev.wiphy = wiphy; |
| priv->wdev.iftype = NL80211_IFTYPE_STATION; |
| |
| if (type == NL80211_IFTYPE_UNSPECIFIED) |
| priv->bss_mode = NL80211_IFTYPE_STATION; |
| else |
| priv->bss_mode = type; |
| |
| priv->bss_type = MWIFIEX_BSS_TYPE_STA; |
| priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II; |
| priv->bss_priority = 0; |
| priv->bss_role = MWIFIEX_BSS_ROLE_STA; |
| |
| break; |
| case NL80211_IFTYPE_AP: |
| if (adapter->curr_iface_comb.uap_intf == |
| adapter->iface_limit.uap_intf) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot create multiple AP ifaces\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| priv = mwifiex_get_unused_priv_by_bss_type( |
| adapter, MWIFIEX_BSS_TYPE_UAP); |
| if (!priv) { |
| mwifiex_dbg(adapter, ERROR, |
| "could not get free private struct\n"); |
| return ERR_PTR(-EFAULT); |
| } |
| |
| priv->wdev.wiphy = wiphy; |
| priv->wdev.iftype = NL80211_IFTYPE_AP; |
| |
| priv->bss_type = MWIFIEX_BSS_TYPE_UAP; |
| priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II; |
| priv->bss_priority = 0; |
| priv->bss_role = MWIFIEX_BSS_ROLE_UAP; |
| priv->bss_started = 0; |
| priv->bss_mode = type; |
| |
| break; |
| case NL80211_IFTYPE_P2P_CLIENT: |
| if (adapter->curr_iface_comb.p2p_intf == |
| adapter->iface_limit.p2p_intf) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot create multiple P2P ifaces\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| priv = mwifiex_get_unused_priv_by_bss_type( |
| adapter, MWIFIEX_BSS_TYPE_P2P); |
| if (!priv) { |
| mwifiex_dbg(adapter, ERROR, |
| "could not get free private struct\n"); |
| return ERR_PTR(-EFAULT); |
| } |
| |
| priv->wdev.wiphy = wiphy; |
| /* At start-up, wpa_supplicant tries to change the interface |
| * to NL80211_IFTYPE_STATION if it is not managed mode. |
| */ |
| priv->wdev.iftype = NL80211_IFTYPE_P2P_CLIENT; |
| priv->bss_mode = NL80211_IFTYPE_P2P_CLIENT; |
| |
| /* Setting bss_type to P2P tells firmware that this interface |
| * is receiving P2P peers found during find phase and doing |
| * action frame handshake. |
| */ |
| priv->bss_type = MWIFIEX_BSS_TYPE_P2P; |
| |
| priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II; |
| priv->bss_priority = MWIFIEX_BSS_ROLE_STA; |
| priv->bss_role = MWIFIEX_BSS_ROLE_STA; |
| priv->bss_started = 0; |
| |
| if (mwifiex_cfg80211_init_p2p_client(priv)) { |
| memset(&priv->wdev, 0, sizeof(priv->wdev)); |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; |
| return ERR_PTR(-EFAULT); |
| } |
| |
| break; |
| default: |
| mwifiex_dbg(adapter, ERROR, "type not supported\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| dev = alloc_netdev_mqs(sizeof(struct mwifiex_private *), name, |
| name_assign_type, ether_setup, |
| IEEE80211_NUM_ACS, 1); |
| if (!dev) { |
| mwifiex_dbg(adapter, ERROR, |
| "no memory available for netdevice\n"); |
| memset(&priv->wdev, 0, sizeof(priv->wdev)); |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| mwifiex_init_priv_params(priv, dev); |
| priv->netdev = dev; |
| |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE, |
| HostCmd_ACT_GEN_SET, 0, NULL, true); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| ret = mwifiex_sta_init_cmd(priv, false, false); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| mwifiex_setup_ht_caps(&wiphy->bands[NL80211_BAND_2GHZ]->ht_cap, priv); |
| if (adapter->is_hw_11ac_capable) |
| mwifiex_setup_vht_caps( |
| &wiphy->bands[NL80211_BAND_2GHZ]->vht_cap, priv); |
| |
| if (adapter->config_bands & BAND_A) |
| mwifiex_setup_ht_caps( |
| &wiphy->bands[NL80211_BAND_5GHZ]->ht_cap, priv); |
| |
| if ((adapter->config_bands & BAND_A) && adapter->is_hw_11ac_capable) |
| mwifiex_setup_vht_caps( |
| &wiphy->bands[NL80211_BAND_5GHZ]->vht_cap, priv); |
| |
| dev_net_set(dev, wiphy_net(wiphy)); |
| dev->ieee80211_ptr = &priv->wdev; |
| dev->ieee80211_ptr->iftype = priv->bss_mode; |
| memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN); |
| SET_NETDEV_DEV(dev, wiphy_dev(wiphy)); |
| |
| dev->flags |= IFF_BROADCAST | IFF_MULTICAST; |
| dev->watchdog_timeo = MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT; |
| dev->hard_header_len += MWIFIEX_MIN_DATA_HEADER_LEN; |
| dev->ethtool_ops = &mwifiex_ethtool_ops; |
| |
| mdev_priv = netdev_priv(dev); |
| *((unsigned long *) mdev_priv) = (unsigned long) priv; |
| |
| SET_NETDEV_DEV(dev, adapter->dev); |
| |
| /* Register network device */ |
| if (register_netdevice(dev)) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot register virtual network device\n"); |
| free_netdev(dev); |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; |
| priv->netdev = NULL; |
| memset(&priv->wdev, 0, sizeof(priv->wdev)); |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; |
| return ERR_PTR(-EFAULT); |
| } |
| |
| priv->dfs_cac_workqueue = alloc_workqueue("MWIFIEX_DFS_CAC%s", |
| WQ_HIGHPRI | |
| WQ_MEM_RECLAIM | |
| WQ_UNBOUND, 1, name); |
| if (!priv->dfs_cac_workqueue) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot register virtual network device\n"); |
| free_netdev(dev); |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; |
| priv->netdev = NULL; |
| memset(&priv->wdev, 0, sizeof(priv->wdev)); |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| INIT_DELAYED_WORK(&priv->dfs_cac_work, mwifiex_dfs_cac_work_queue); |
| |
| priv->dfs_chan_sw_workqueue = alloc_workqueue("MWIFIEX_DFS_CHSW%s", |
| WQ_HIGHPRI | WQ_UNBOUND | |
| WQ_MEM_RECLAIM, 1, name); |
| if (!priv->dfs_chan_sw_workqueue) { |
| mwifiex_dbg(adapter, ERROR, |
| "cannot register virtual network device\n"); |
| free_netdev(dev); |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; |
| priv->netdev = NULL; |
| memset(&priv->wdev, 0, sizeof(priv->wdev)); |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| INIT_DELAYED_WORK(&priv->dfs_chan_sw_work, |
| mwifiex_dfs_chan_sw_work_queue); |
| |
| sema_init(&priv->async_sem, 1); |
| |
| mwifiex_dbg(adapter, INFO, |
| "info: %s: Marvell 802.11 Adapter\n", dev->name); |
| |
| #ifdef CONFIG_DEBUG_FS |
| mwifiex_dev_debugfs_init(priv); |
| #endif |
| |
| switch (type) { |
| case NL80211_IFTYPE_UNSPECIFIED: |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_ADHOC: |
| adapter->curr_iface_comb.sta_intf++; |
| break; |
| case NL80211_IFTYPE_AP: |
| adapter->curr_iface_comb.uap_intf++; |
| break; |
| case NL80211_IFTYPE_P2P_CLIENT: |
| adapter->curr_iface_comb.p2p_intf++; |
| break; |
| default: |
| mwifiex_dbg(adapter, ERROR, "type not supported\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| return &priv->wdev; |
| } |
| EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf); |
| |
| /* |
| * del_virtual_intf: remove the virtual interface determined by dev |
| */ |
| int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); |
| struct mwifiex_adapter *adapter = priv->adapter; |
| struct sk_buff *skb, *tmp; |
| |
| #ifdef CONFIG_DEBUG_FS |
| mwifiex_dev_debugfs_remove(priv); |
| #endif |
| |
| if (priv->sched_scanning) |
| priv->sched_scanning = false; |
| |
| mwifiex_stop_net_dev_queue(priv->netdev, adapter); |
| |
| skb_queue_walk_safe(&priv->bypass_txq, skb, tmp) |
| mwifiex_write_data_complete(priv->adapter, skb, 0, -1); |
| |
| if (netif_carrier_ok(priv->netdev)) |
| netif_carrier_off(priv->netdev); |
| |
| if (wdev->netdev->reg_state == NETREG_REGISTERED) |
| unregister_netdevice(wdev->netdev); |
| |
| if (priv->dfs_cac_workqueue) { |
| flush_workqueue(priv->dfs_cac_workqueue); |
| destroy_workqueue(priv->dfs_cac_workqueue); |
| priv->dfs_cac_workqueue = NULL; |
| } |
| |
| if (priv->dfs_chan_sw_workqueue) { |
| flush_workqueue(priv->dfs_chan_sw_workqueue); |
| destroy_workqueue(priv->dfs_chan_sw_workqueue); |
| priv->dfs_chan_sw_workqueue = NULL; |
| } |
| /* Clear the priv in adapter */ |
| priv->netdev->ieee80211_ptr = NULL; |
| priv->netdev = NULL; |
| priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED; |
| |
| priv->media_connected = false; |
| |
| switch (priv->bss_mode) { |
| case NL80211_IFTYPE_UNSPECIFIED: |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_ADHOC: |
| adapter->curr_iface_comb.sta_intf--; |
| break; |
| case NL80211_IFTYPE_AP: |
| adapter->curr_iface_comb.uap_intf--; |
| break; |
| case NL80211_IFTYPE_P2P_CLIENT: |
| case NL80211_IFTYPE_P2P_GO: |
| adapter->curr_iface_comb.p2p_intf--; |
| break; |
| default: |
| mwifiex_dbg(adapter, ERROR, |
| "del_virtual_intf: type not supported\n"); |
| break; |
| } |
| |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; |
| |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA || |
| GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) |
| kfree(priv->hist_data); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mwifiex_del_virtual_intf); |
| |
| static bool |
| mwifiex_is_pattern_supported(struct cfg80211_pkt_pattern *pat, s8 *byte_seq, |
| u8 max_byte_seq) |
| { |
| int j, k, valid_byte_cnt = 0; |
| bool dont_care_byte = false; |
| |
| for (j = 0; j < DIV_ROUND_UP(pat->pattern_len, 8); j++) { |
| for (k = 0; k < 8; k++) { |
| if (pat->mask[j] & 1 << k) { |
| memcpy(byte_seq + valid_byte_cnt, |
| &pat->pattern[j * 8 + k], 1); |
| valid_byte_cnt++; |
| if (dont_care_byte) |
| return false; |
| } else { |
| if (valid_byte_cnt) |
| dont_care_byte = true; |
| } |
| |
| /* wildcard bytes record as the offset |
| * before the valid byte |
| */ |
| if (!valid_byte_cnt && !dont_care_byte) |
| pat->pkt_offset++; |
| |
| if (valid_byte_cnt > max_byte_seq) |
| return false; |
| } |
| } |
| |
| byte_seq[max_byte_seq] = valid_byte_cnt; |
| |
| return true; |
| } |
| |
| #ifdef CONFIG_PM |
| static void mwifiex_set_auto_arp_mef_entry(struct mwifiex_private *priv, |
| struct mwifiex_mef_entry *mef_entry) |
| { |
| int i, filt_num = 0, num_ipv4 = 0; |
| struct in_device *in_dev; |
| struct in_ifaddr *ifa; |
| __be32 ips[MWIFIEX_MAX_SUPPORTED_IPADDR]; |
| struct mwifiex_adapter *adapter = priv->adapter; |
| |
| mef_entry->mode = MEF_MODE_HOST_SLEEP; |
| mef_entry->action = MEF_ACTION_AUTO_ARP; |
| |
| /* Enable ARP offload feature */ |
| memset(ips, 0, sizeof(ips)); |
| for (i = 0; i < MWIFIEX_MAX_BSS_NUM; i++) { |
| if (adapter->priv[i]->netdev) { |
| in_dev = __in_dev_get_rtnl(adapter->priv[i]->netdev); |
| if (!in_dev) |
| continue; |
| ifa = in_dev->ifa_list; |
| if (!ifa || !ifa->ifa_local) |
| continue; |
| ips[i] = ifa->ifa_local; |
| num_ipv4++; |
| } |
| } |
| |
| for (i = 0; i < num_ipv4; i++) { |
| if (!ips[i]) |
| continue; |
| mef_entry->filter[filt_num].repeat = 1; |
| memcpy(mef_entry->filter[filt_num].byte_seq, |
| (u8 *)&ips[i], sizeof(ips[i])); |
| mef_entry->filter[filt_num]. |
| byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] = |
| sizeof(ips[i]); |
| mef_entry->filter[filt_num].offset = 46; |
| mef_entry->filter[filt_num].filt_type = TYPE_EQ; |
| if (filt_num) { |
| mef_entry->filter[filt_num].filt_action = |
| TYPE_OR; |
| } |
| filt_num++; |
| } |
| |
| mef_entry->filter[filt_num].repeat = 1; |
| mef_entry->filter[filt_num].byte_seq[0] = 0x08; |
| mef_entry->filter[filt_num].byte_seq[1] = 0x06; |
| mef_entry->filter[filt_num].byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] = 2; |
| mef_entry->filter[filt_num].offset = 20; |
| mef_entry->filter[filt_num].filt_type = TYPE_EQ; |
| mef_entry->filter[filt_num].filt_action = TYPE_AND; |
| } |
| |
| static int mwifiex_set_wowlan_mef_entry(struct mwifiex_private *priv, |
| struct mwifiex_ds_mef_cfg *mef_cfg, |
| struct mwifiex_mef_entry *mef_entry, |
| struct cfg80211_wowlan *wowlan) |
| { |
| int i, filt_num = 0, ret = 0; |
| bool first_pat = true; |
| u8 byte_seq[MWIFIEX_MEF_MAX_BYTESEQ + 1]; |
| const u8 ipv4_mc_mac[] = {0x33, 0x33}; |
| const u8 ipv6_mc_mac[] = {0x01, 0x00, 0x5e}; |
| |
| mef_entry->mode = MEF_MODE_HOST_SLEEP; |
| mef_entry->action = MEF_ACTION_ALLOW_AND_WAKEUP_HOST; |
| |
| for (i = 0; i < wowlan->n_patterns; i++) { |
| memset(byte_seq, 0, sizeof(byte_seq)); |
| if (!mwifiex_is_pattern_supported(&wowlan->patterns[i], |
| byte_seq, |
| MWIFIEX_MEF_MAX_BYTESEQ)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Pattern not supported\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| if (!wowlan->patterns[i].pkt_offset) { |
| if (!(byte_seq[0] & 0x01) && |
| (byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] == 1)) { |
| mef_cfg->criteria |= MWIFIEX_CRITERIA_UNICAST; |
| continue; |
| } else if (is_broadcast_ether_addr(byte_seq)) { |
| mef_cfg->criteria |= MWIFIEX_CRITERIA_BROADCAST; |
| continue; |
| } else if ((!memcmp(byte_seq, ipv4_mc_mac, 2) && |
| (byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] == 2)) || |
| (!memcmp(byte_seq, ipv6_mc_mac, 3) && |
| (byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] == 3))) { |
| mef_cfg->criteria |= MWIFIEX_CRITERIA_MULTICAST; |
| continue; |
| } |
| } |
| mef_entry->filter[filt_num].repeat = 1; |
| mef_entry->filter[filt_num].offset = |
| wowlan->patterns[i].pkt_offset; |
| memcpy(mef_entry->filter[filt_num].byte_seq, byte_seq, |
| sizeof(byte_seq)); |
| mef_entry->filter[filt_num].filt_type = TYPE_EQ; |
| |
| if (first_pat) { |
| first_pat = false; |
| mwifiex_dbg(priv->adapter, INFO, "Wake on patterns\n"); |
| } else { |
| mef_entry->filter[filt_num].filt_action = TYPE_AND; |
| } |
| |
| filt_num++; |
| } |
| |
| if (wowlan->magic_pkt) { |
| mef_cfg->criteria |= MWIFIEX_CRITERIA_UNICAST; |
| mef_entry->filter[filt_num].repeat = 16; |
| memcpy(mef_entry->filter[filt_num].byte_seq, priv->curr_addr, |
| ETH_ALEN); |
| mef_entry->filter[filt_num].byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] = |
| ETH_ALEN; |
| mef_entry->filter[filt_num].offset = 28; |
| mef_entry->filter[filt_num].filt_type = TYPE_EQ; |
| if (filt_num) |
| mef_entry->filter[filt_num].filt_action = TYPE_OR; |
| |
| filt_num++; |
| mef_entry->filter[filt_num].repeat = 16; |
| memcpy(mef_entry->filter[filt_num].byte_seq, priv->curr_addr, |
| ETH_ALEN); |
| mef_entry->filter[filt_num].byte_seq[MWIFIEX_MEF_MAX_BYTESEQ] = |
| ETH_ALEN; |
| mef_entry->filter[filt_num].offset = 56; |
| mef_entry->filter[filt_num].filt_type = TYPE_EQ; |
| mef_entry->filter[filt_num].filt_action = TYPE_OR; |
| mwifiex_dbg(priv->adapter, INFO, "Wake on magic packet\n"); |
| } |
| return ret; |
| } |
| |
| static int mwifiex_set_mef_filter(struct mwifiex_private *priv, |
| struct cfg80211_wowlan *wowlan) |
| { |
| int ret = 0, num_entries = 1; |
| struct mwifiex_ds_mef_cfg mef_cfg; |
| struct mwifiex_mef_entry *mef_entry; |
| |
| if (wowlan->n_patterns || wowlan->magic_pkt) |
| num_entries++; |
| |
| mef_entry = kcalloc(num_entries, sizeof(*mef_entry), GFP_KERNEL); |
| if (!mef_entry) |
| return -ENOMEM; |
| |
| memset(&mef_cfg, 0, sizeof(mef_cfg)); |
| mef_cfg.criteria |= MWIFIEX_CRITERIA_BROADCAST | |
| MWIFIEX_CRITERIA_UNICAST; |
| mef_cfg.num_entries = num_entries; |
| mef_cfg.mef_entry = mef_entry; |
| |
| mwifiex_set_auto_arp_mef_entry(priv, &mef_entry[0]); |
| |
| if (wowlan->n_patterns || wowlan->magic_pkt) { |
| ret = mwifiex_set_wowlan_mef_entry(priv, &mef_cfg, |
| &mef_entry[1], wowlan); |
| if (ret) |
| goto err; |
| } |
| |
| if (!mef_cfg.criteria) |
| mef_cfg.criteria = MWIFIEX_CRITERIA_BROADCAST | |
| MWIFIEX_CRITERIA_UNICAST | |
| MWIFIEX_CRITERIA_MULTICAST; |
| |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_MEF_CFG, |
| HostCmd_ACT_GEN_SET, 0, |
| &mef_cfg, true); |
| |
| err: |
| kfree(mef_entry); |
| return ret; |
| } |
| |
| static int mwifiex_cfg80211_suspend(struct wiphy *wiphy, |
| struct cfg80211_wowlan *wowlan) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| struct mwifiex_ds_hs_cfg hs_cfg; |
| int i, ret = 0, retry_num = 10; |
| struct mwifiex_private *priv; |
| struct mwifiex_private *sta_priv = |
| mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA); |
| |
| sta_priv->scan_aborting = true; |
| for (i = 0; i < adapter->priv_num; i++) { |
| priv = adapter->priv[i]; |
| mwifiex_abort_cac(priv); |
| } |
| |
| mwifiex_cancel_all_pending_cmd(adapter); |
| |
| for (i = 0; i < adapter->priv_num; i++) { |
| priv = adapter->priv[i]; |
| if (priv && priv->netdev) { |
| mwifiex_stop_net_dev_queue(priv->netdev, adapter); |
| if (netif_carrier_ok(priv->netdev)) |
| netif_carrier_off(priv->netdev); |
| } |
| } |
| |
| for (i = 0; i < retry_num; i++) { |
| if (!mwifiex_wmm_lists_empty(adapter) || |
| !mwifiex_bypass_txlist_empty(adapter) || |
| !skb_queue_empty(&adapter->tx_data_q)) |
| usleep_range(10000, 15000); |
| else |
| break; |
| } |
| |
| if (!wowlan) { |
| mwifiex_dbg(adapter, ERROR, |
| "None of the WOWLAN triggers enabled\n"); |
| ret = 0; |
| goto done; |
| } |
| |
| if (!sta_priv->media_connected && !wowlan->nd_config) { |
| mwifiex_dbg(adapter, ERROR, |
| "Can not configure WOWLAN in disconnected state\n"); |
| ret = 0; |
| goto done; |
| } |
| |
| ret = mwifiex_set_mef_filter(sta_priv, wowlan); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, "Failed to set MEF filter\n"); |
| goto done; |
| } |
| |
| memset(&hs_cfg, 0, sizeof(hs_cfg)); |
| hs_cfg.conditions = le32_to_cpu(adapter->hs_cfg.conditions); |
| |
| if (wowlan->nd_config) { |
| mwifiex_dbg(adapter, INFO, "Wake on net detect\n"); |
| hs_cfg.conditions |= HS_CFG_COND_MAC_EVENT; |
| mwifiex_cfg80211_sched_scan_start(wiphy, sta_priv->netdev, |
| wowlan->nd_config); |
| } |
| |
| if (wowlan->disconnect) { |
| hs_cfg.conditions |= HS_CFG_COND_MAC_EVENT; |
| mwifiex_dbg(sta_priv->adapter, INFO, "Wake on device disconnect\n"); |
| } |
| |
| hs_cfg.is_invoke_hostcmd = false; |
| hs_cfg.gpio = adapter->hs_cfg.gpio; |
| hs_cfg.gap = adapter->hs_cfg.gap; |
| ret = mwifiex_set_hs_params(sta_priv, HostCmd_ACT_GEN_SET, |
| MWIFIEX_SYNC_CMD, &hs_cfg); |
| if (ret) |
| mwifiex_dbg(adapter, ERROR, "Failed to set HS params\n"); |
| |
| done: |
| sta_priv->scan_aborting = false; |
| return ret; |
| } |
| |
| static int mwifiex_cfg80211_resume(struct wiphy *wiphy) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| struct mwifiex_private *priv; |
| struct mwifiex_ds_wakeup_reason wakeup_reason; |
| struct cfg80211_wowlan_wakeup wakeup_report; |
| int i; |
| bool report_wakeup_reason = true; |
| |
| for (i = 0; i < adapter->priv_num; i++) { |
| priv = adapter->priv[i]; |
| if (priv && priv->netdev) { |
| if (!netif_carrier_ok(priv->netdev)) |
| netif_carrier_on(priv->netdev); |
| mwifiex_wake_up_net_dev_queue(priv->netdev, adapter); |
| } |
| } |
| |
| if (!wiphy->wowlan_config) |
| goto done; |
| |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA); |
| mwifiex_get_wakeup_reason(priv, HostCmd_ACT_GEN_GET, MWIFIEX_SYNC_CMD, |
| &wakeup_reason); |
| memset(&wakeup_report, 0, sizeof(struct cfg80211_wowlan_wakeup)); |
| |
| wakeup_report.pattern_idx = -1; |
| |
| switch (wakeup_reason.hs_wakeup_reason) { |
| case NO_HSWAKEUP_REASON: |
| break; |
| case BCAST_DATA_MATCHED: |
| break; |
| case MCAST_DATA_MATCHED: |
| break; |
| case UCAST_DATA_MATCHED: |
| break; |
| case MASKTABLE_EVENT_MATCHED: |
| break; |
| case NON_MASKABLE_EVENT_MATCHED: |
| if (wiphy->wowlan_config->disconnect) |
| wakeup_report.disconnect = true; |
| if (wiphy->wowlan_config->nd_config) |
| wakeup_report.net_detect = adapter->nd_info; |
| break; |
| case NON_MASKABLE_CONDITION_MATCHED: |
| break; |
| case MAGIC_PATTERN_MATCHED: |
| if (wiphy->wowlan_config->magic_pkt) |
| wakeup_report.magic_pkt = true; |
| if (wiphy->wowlan_config->n_patterns) |
| wakeup_report.pattern_idx = 1; |
| break; |
| case GTK_REKEY_FAILURE: |
| if (wiphy->wowlan_config->gtk_rekey_failure) |
| wakeup_report.gtk_rekey_failure = true; |
| break; |
| default: |
| report_wakeup_reason = false; |
| break; |
| } |
| |
| if (report_wakeup_reason) |
| cfg80211_report_wowlan_wakeup(&priv->wdev, &wakeup_report, |
| GFP_KERNEL); |
| |
| done: |
| if (adapter->nd_info) { |
| for (i = 0 ; i < adapter->nd_info->n_matches ; i++) |
| kfree(adapter->nd_info->matches[i]); |
| kfree(adapter->nd_info); |
| adapter->nd_info = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static void mwifiex_cfg80211_set_wakeup(struct wiphy *wiphy, |
| bool enabled) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| |
| device_set_wakeup_enable(adapter->dev, enabled); |
| } |
| |
| static int mwifiex_set_rekey_data(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_gtk_rekey_data *data) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| return mwifiex_send_cmd(priv, HostCmd_CMD_GTK_REKEY_OFFLOAD_CFG, |
| HostCmd_ACT_GEN_SET, 0, data, true); |
| } |
| |
| #endif |
| |
| static int mwifiex_get_coalesce_pkt_type(u8 *byte_seq) |
| { |
| const u8 ipv4_mc_mac[] = {0x33, 0x33}; |
| const u8 ipv6_mc_mac[] = {0x01, 0x00, 0x5e}; |
| const u8 bc_mac[] = {0xff, 0xff, 0xff, 0xff}; |
| |
| if ((byte_seq[0] & 0x01) && |
| (byte_seq[MWIFIEX_COALESCE_MAX_BYTESEQ] == 1)) |
| return PACKET_TYPE_UNICAST; |
| else if (!memcmp(byte_seq, bc_mac, 4)) |
| return PACKET_TYPE_BROADCAST; |
| else if ((!memcmp(byte_seq, ipv4_mc_mac, 2) && |
| byte_seq[MWIFIEX_COALESCE_MAX_BYTESEQ] == 2) || |
| (!memcmp(byte_seq, ipv6_mc_mac, 3) && |
| byte_seq[MWIFIEX_COALESCE_MAX_BYTESEQ] == 3)) |
| return PACKET_TYPE_MULTICAST; |
| |
| return 0; |
| } |
| |
| static int |
| mwifiex_fill_coalesce_rule_info(struct mwifiex_private *priv, |
| struct cfg80211_coalesce_rules *crule, |
| struct mwifiex_coalesce_rule *mrule) |
| { |
| u8 byte_seq[MWIFIEX_COALESCE_MAX_BYTESEQ + 1]; |
| struct filt_field_param *param; |
| int i; |
| |
| mrule->max_coalescing_delay = crule->delay; |
| |
| param = mrule->params; |
| |
| for (i = 0; i < crule->n_patterns; i++) { |
| memset(byte_seq, 0, sizeof(byte_seq)); |
| if (!mwifiex_is_pattern_supported(&crule->patterns[i], |
| byte_seq, |
| MWIFIEX_COALESCE_MAX_BYTESEQ)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Pattern not supported\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| if (!crule->patterns[i].pkt_offset) { |
| u8 pkt_type; |
| |
| pkt_type = mwifiex_get_coalesce_pkt_type(byte_seq); |
| if (pkt_type && mrule->pkt_type) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Multiple packet types not allowed\n"); |
| return -EOPNOTSUPP; |
| } else if (pkt_type) { |
| mrule->pkt_type = pkt_type; |
| continue; |
| } |
| } |
| |
| if (crule->condition == NL80211_COALESCE_CONDITION_MATCH) |
| param->operation = RECV_FILTER_MATCH_TYPE_EQ; |
| else |
| param->operation = RECV_FILTER_MATCH_TYPE_NE; |
| |
| param->operand_len = byte_seq[MWIFIEX_COALESCE_MAX_BYTESEQ]; |
| memcpy(param->operand_byte_stream, byte_seq, |
| param->operand_len); |
| param->offset = crule->patterns[i].pkt_offset; |
| param++; |
| |
| mrule->num_of_fields++; |
| } |
| |
| if (!mrule->pkt_type) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Packet type can not be determined\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int mwifiex_cfg80211_set_coalesce(struct wiphy *wiphy, |
| struct cfg80211_coalesce *coalesce) |
| { |
| struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); |
| int i, ret; |
| struct mwifiex_ds_coalesce_cfg coalesce_cfg; |
| struct mwifiex_private *priv = |
| mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA); |
| |
| memset(&coalesce_cfg, 0, sizeof(coalesce_cfg)); |
| if (!coalesce) { |
| mwifiex_dbg(adapter, WARN, |
| "Disable coalesce and reset all previous rules\n"); |
| return mwifiex_send_cmd(priv, HostCmd_CMD_COALESCE_CFG, |
| HostCmd_ACT_GEN_SET, 0, |
| &coalesce_cfg, true); |
| } |
| |
| coalesce_cfg.num_of_rules = coalesce->n_rules; |
| for (i = 0; i < coalesce->n_rules; i++) { |
| ret = mwifiex_fill_coalesce_rule_info(priv, &coalesce->rules[i], |
| &coalesce_cfg.rule[i]); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, |
| "Recheck the patterns provided for rule %d\n", |
| i + 1); |
| return ret; |
| } |
| } |
| |
| return mwifiex_send_cmd(priv, HostCmd_CMD_COALESCE_CFG, |
| HostCmd_ACT_GEN_SET, 0, &coalesce_cfg, true); |
| } |
| |
| /* cfg80211 ops handler for tdls_mgmt. |
| * Function prepares TDLS action frame packets and forwards them to FW |
| */ |
| static int |
| mwifiex_cfg80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *peer, u8 action_code, u8 dialog_token, |
| u16 status_code, u32 peer_capability, |
| bool initiator, const u8 *extra_ies, |
| size_t extra_ies_len) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| int ret; |
| |
| if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)) |
| return -ENOTSUPP; |
| |
| /* make sure we are in station mode and connected */ |
| if (!(priv->bss_type == MWIFIEX_BSS_TYPE_STA && priv->media_connected)) |
| return -ENOTSUPP; |
| |
| switch (action_code) { |
| case WLAN_TDLS_SETUP_REQUEST: |
| mwifiex_dbg(priv->adapter, MSG, |
| "Send TDLS Setup Request to %pM status_code=%d\n", |
| peer, status_code); |
| mwifiex_add_auto_tdls_peer(priv, peer); |
| ret = mwifiex_send_tdls_data_frame(priv, peer, action_code, |
| dialog_token, status_code, |
| extra_ies, extra_ies_len); |
| break; |
| case WLAN_TDLS_SETUP_RESPONSE: |
| mwifiex_add_auto_tdls_peer(priv, peer); |
| mwifiex_dbg(priv->adapter, MSG, |
| "Send TDLS Setup Response to %pM status_code=%d\n", |
| peer, status_code); |
| ret = mwifiex_send_tdls_data_frame(priv, peer, action_code, |
| dialog_token, status_code, |
| extra_ies, extra_ies_len); |
| break; |
| case WLAN_TDLS_SETUP_CONFIRM: |
| mwifiex_dbg(priv->adapter, MSG, |
| "Send TDLS Confirm to %pM status_code=%d\n", peer, |
| status_code); |
| ret = mwifiex_send_tdls_data_frame(priv, peer, action_code, |
| dialog_token, status_code, |
| extra_ies, extra_ies_len); |
| break; |
| case WLAN_TDLS_TEARDOWN: |
| mwifiex_dbg(priv->adapter, MSG, |
| "Send TDLS Tear down to %pM\n", peer); |
| ret = mwifiex_send_tdls_data_frame(priv, peer, action_code, |
| dialog_token, status_code, |
| extra_ies, extra_ies_len); |
| break; |
| case WLAN_TDLS_DISCOVERY_REQUEST: |
| mwifiex_dbg(priv->adapter, MSG, |
| "Send TDLS Discovery Request to %pM\n", peer); |
| ret = mwifiex_send_tdls_data_frame(priv, peer, action_code, |
| dialog_token, status_code, |
| extra_ies, extra_ies_len); |
| break; |
| case WLAN_PUB_ACTION_TDLS_DISCOVER_RES: |
| mwifiex_dbg(priv->adapter, MSG, |
| "Send TDLS Discovery Response to %pM\n", peer); |
| ret = mwifiex_send_tdls_action_frame(priv, peer, action_code, |
| dialog_token, status_code, |
| extra_ies, extra_ies_len); |
| break; |
| default: |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Unknown TDLS mgmt/action frame %pM\n", peer); |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int |
| mwifiex_cfg80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *peer, enum nl80211_tdls_operation action) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) || |
| !(wiphy->flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP)) |
| return -ENOTSUPP; |
| |
| /* make sure we are in station mode and connected */ |
| if (!(priv->bss_type == MWIFIEX_BSS_TYPE_STA && priv->media_connected)) |
| return -ENOTSUPP; |
| |
| mwifiex_dbg(priv->adapter, MSG, |
| "TDLS peer=%pM, oper=%d\n", peer, action); |
| |
| switch (action) { |
| case NL80211_TDLS_ENABLE_LINK: |
| action = MWIFIEX_TDLS_ENABLE_LINK; |
| break; |
| case NL80211_TDLS_DISABLE_LINK: |
| action = MWIFIEX_TDLS_DISABLE_LINK; |
| break; |
| case NL80211_TDLS_TEARDOWN: |
| /* shouldn't happen!*/ |
| mwifiex_dbg(priv->adapter, ERROR, |
| "tdls_oper: teardown from driver not supported\n"); |
| return -EINVAL; |
| case NL80211_TDLS_SETUP: |
| /* shouldn't happen!*/ |
| mwifiex_dbg(priv->adapter, ERROR, |
| "tdls_oper: setup from driver not supported\n"); |
| return -EINVAL; |
| case NL80211_TDLS_DISCOVERY_REQ: |
| /* shouldn't happen!*/ |
| mwifiex_dbg(priv->adapter, ERROR, |
| "tdls_oper: discovery from driver not supported\n"); |
| return -EINVAL; |
| default: |
| mwifiex_dbg(priv->adapter, ERROR, |
| "tdls_oper: operation not supported\n"); |
| return -ENOTSUPP; |
| } |
| |
| return mwifiex_tdls_oper(priv, peer, action); |
| } |
| |
| static int |
| mwifiex_cfg80211_tdls_chan_switch(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *addr, u8 oper_class, |
| struct cfg80211_chan_def *chandef) |
| { |
| struct mwifiex_sta_node *sta_ptr; |
| unsigned long flags; |
| u16 chan; |
| u8 second_chan_offset, band; |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| spin_lock_irqsave(&priv->sta_list_spinlock, flags); |
| sta_ptr = mwifiex_get_sta_entry(priv, addr); |
| spin_unlock_irqrestore(&priv->sta_list_spinlock, flags); |
| |
| if (!sta_ptr) { |
| wiphy_err(wiphy, "%s: Invalid TDLS peer %pM\n", |
| __func__, addr); |
| return -ENOENT; |
| } |
| |
| if (!(sta_ptr->tdls_cap.extcap.ext_capab[3] & |
| WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH)) { |
| wiphy_err(wiphy, "%pM do not support tdls cs\n", addr); |
| return -ENOENT; |
| } |
| |
| if (sta_ptr->tdls_status == TDLS_CHAN_SWITCHING || |
| sta_ptr->tdls_status == TDLS_IN_OFF_CHAN) { |
| wiphy_err(wiphy, "channel switch is running, abort request\n"); |
| return -EALREADY; |
| } |
| |
| chan = chandef->chan->hw_value; |
| second_chan_offset = mwifiex_get_sec_chan_offset(chan); |
| band = chandef->chan->band; |
| mwifiex_start_tdls_cs(priv, addr, chan, second_chan_offset, band); |
| |
| return 0; |
| } |
| |
| static void |
| mwifiex_cfg80211_tdls_cancel_chan_switch(struct wiphy *wiphy, |
| struct net_device *dev, |
| const u8 *addr) |
| { |
| struct mwifiex_sta_node *sta_ptr; |
| unsigned long flags; |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| spin_lock_irqsave(&priv->sta_list_spinlock, flags); |
| sta_ptr = mwifiex_get_sta_entry(priv, addr); |
| spin_unlock_irqrestore(&priv->sta_list_spinlock, flags); |
| |
| if (!sta_ptr) { |
| wiphy_err(wiphy, "%s: Invalid TDLS peer %pM\n", |
| __func__, addr); |
| } else if (!(sta_ptr->tdls_status == TDLS_CHAN_SWITCHING || |
| sta_ptr->tdls_status == TDLS_IN_BASE_CHAN || |
| sta_ptr->tdls_status == TDLS_IN_OFF_CHAN)) { |
| wiphy_err(wiphy, "tdls chan switch not initialize by %pM\n", |
| addr); |
| } else |
| mwifiex_stop_tdls_cs(priv, addr); |
| } |
| |
| static int |
| mwifiex_cfg80211_add_station(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *mac, struct station_parameters *params) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) |
| return -ENOTSUPP; |
| |
| /* make sure we are in station mode and connected */ |
| if ((priv->bss_type != MWIFIEX_BSS_TYPE_STA) || !priv->media_connected) |
| return -ENOTSUPP; |
| |
| return mwifiex_tdls_oper(priv, mac, MWIFIEX_TDLS_CREATE_LINK); |
| } |
| |
| static int |
| mwifiex_cfg80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_csa_settings *params) |
| { |
| struct ieee_types_header *chsw_ie; |
| struct ieee80211_channel_sw_ie *channel_sw; |
| int chsw_msec; |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| if (priv->adapter->scan_processing) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "radar detection: scan in process...\n"); |
| return -EBUSY; |
| } |
| |
| if (priv->wdev.cac_started) |
| return -EBUSY; |
| |
| if (cfg80211_chandef_identical(¶ms->chandef, |
| &priv->dfs_chandef)) |
| return -EINVAL; |
| |
| chsw_ie = (void *)cfg80211_find_ie(WLAN_EID_CHANNEL_SWITCH, |
| params->beacon_csa.tail, |
| params->beacon_csa.tail_len); |
| if (!chsw_ie) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Could not parse channel switch announcement IE\n"); |
| return -EINVAL; |
| } |
| |
| channel_sw = (void *)(chsw_ie + 1); |
| if (channel_sw->mode) { |
| if (netif_carrier_ok(priv->netdev)) |
| netif_carrier_off(priv->netdev); |
| mwifiex_stop_net_dev_queue(priv->netdev, priv->adapter); |
| } |
| |
| if (mwifiex_del_mgmt_ies(priv)) |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Failed to delete mgmt IEs!\n"); |
| |
| if (mwifiex_set_mgmt_ies(priv, ¶ms->beacon_csa)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "%s: setting mgmt ies failed\n", __func__); |
| return -EFAULT; |
| } |
| |
| memcpy(&priv->dfs_chandef, ¶ms->chandef, sizeof(priv->dfs_chandef)); |
| memcpy(&priv->beacon_after, ¶ms->beacon_after, |
| sizeof(priv->beacon_after)); |
| |
| chsw_msec = max(channel_sw->count * priv->bss_cfg.beacon_period, 100); |
| queue_delayed_work(priv->dfs_chan_sw_workqueue, &priv->dfs_chan_sw_work, |
| msecs_to_jiffies(chsw_msec)); |
| return 0; |
| } |
| |
| static int mwifiex_cfg80211_get_channel(struct wiphy *wiphy, |
| struct wireless_dev *wdev, |
| struct cfg80211_chan_def *chandef) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); |
| struct mwifiex_bssdescriptor *curr_bss; |
| struct ieee80211_channel *chan; |
| u8 second_chan_offset; |
| enum nl80211_channel_type chan_type; |
| enum nl80211_band band; |
| int freq; |
| int ret = -ENODATA; |
| |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP && |
| cfg80211_chandef_valid(&priv->bss_chandef)) { |
| *chandef = priv->bss_chandef; |
| ret = 0; |
| } else if (priv->media_connected) { |
| curr_bss = &priv->curr_bss_params.bss_descriptor; |
| band = mwifiex_band_to_radio_type(priv->curr_bss_params.band); |
| freq = ieee80211_channel_to_frequency(curr_bss->channel, band); |
| chan = ieee80211_get_channel(wiphy, freq); |
| |
| if (priv->ht_param_present) { |
| second_chan_offset = priv->assoc_resp_ht_param & |
| IEEE80211_HT_PARAM_CHA_SEC_OFFSET; |
| chan_type = mwifiex_sec_chan_offset_to_chan_type |
| (second_chan_offset); |
| cfg80211_chandef_create(chandef, chan, chan_type); |
| } else { |
| cfg80211_chandef_create(chandef, chan, |
| NL80211_CHAN_NO_HT); |
| } |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_NL80211_TESTMODE |
| |
| enum mwifiex_tm_attr { |
| __MWIFIEX_TM_ATTR_INVALID = 0, |
| MWIFIEX_TM_ATTR_CMD = 1, |
| MWIFIEX_TM_ATTR_DATA = 2, |
| |
| /* keep last */ |
| __MWIFIEX_TM_ATTR_AFTER_LAST, |
| MWIFIEX_TM_ATTR_MAX = __MWIFIEX_TM_ATTR_AFTER_LAST - 1, |
| }; |
| |
| static const struct nla_policy mwifiex_tm_policy[MWIFIEX_TM_ATTR_MAX + 1] = { |
| [MWIFIEX_TM_ATTR_CMD] = { .type = NLA_U32 }, |
| [MWIFIEX_TM_ATTR_DATA] = { .type = NLA_BINARY, |
| .len = MWIFIEX_SIZE_OF_CMD_BUFFER }, |
| }; |
| |
| enum mwifiex_tm_command { |
| MWIFIEX_TM_CMD_HOSTCMD = 0, |
| }; |
| |
| static int mwifiex_tm_cmd(struct wiphy *wiphy, struct wireless_dev *wdev, |
| void *data, int len) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev); |
| struct mwifiex_ds_misc_cmd *hostcmd; |
| struct nlattr *tb[MWIFIEX_TM_ATTR_MAX + 1]; |
| struct mwifiex_adapter *adapter; |
| struct sk_buff *skb; |
| int err; |
| |
| if (!priv) |
| return -EINVAL; |
| adapter = priv->adapter; |
| |
| err = nla_parse(tb, MWIFIEX_TM_ATTR_MAX, data, len, |
| mwifiex_tm_policy); |
| if (err) |
| return err; |
| |
| if (!tb[MWIFIEX_TM_ATTR_CMD]) |
| return -EINVAL; |
| |
| switch (nla_get_u32(tb[MWIFIEX_TM_ATTR_CMD])) { |
| case MWIFIEX_TM_CMD_HOSTCMD: |
| if (!tb[MWIFIEX_TM_ATTR_DATA]) |
| return -EINVAL; |
| |
| hostcmd = kzalloc(sizeof(*hostcmd), GFP_KERNEL); |
| if (!hostcmd) |
| return -ENOMEM; |
| |
| hostcmd->len = nla_len(tb[MWIFIEX_TM_ATTR_DATA]); |
| memcpy(hostcmd->cmd, nla_data(tb[MWIFIEX_TM_ATTR_DATA]), |
| hostcmd->len); |
| |
| if (mwifiex_send_cmd(priv, 0, 0, 0, hostcmd, true)) { |
| dev_err(priv->adapter->dev, "Failed to process hostcmd\n"); |
| return -EFAULT; |
| } |
| |
| /* process hostcmd response*/ |
| skb = cfg80211_testmode_alloc_reply_skb(wiphy, hostcmd->len); |
| if (!skb) |
| return -ENOMEM; |
| err = nla_put(skb, MWIFIEX_TM_ATTR_DATA, |
| hostcmd->len, hostcmd->cmd); |
| if (err) { |
| kfree_skb(skb); |
| return -EMSGSIZE; |
| } |
| |
| err = cfg80211_testmode_reply(skb); |
| kfree(hostcmd); |
| return err; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| #endif |
| |
| static int |
| mwifiex_cfg80211_start_radar_detection(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_chan_def *chandef, |
| u32 cac_time_ms) |
| { |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| struct mwifiex_radar_params radar_params; |
| |
| if (priv->adapter->scan_processing) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "radar detection: scan already in process...\n"); |
| return -EBUSY; |
| } |
| |
| if (!mwifiex_is_11h_active(priv)) { |
| mwifiex_dbg(priv->adapter, INFO, |
| "Enable 11h extensions in FW\n"); |
| if (mwifiex_11h_activate(priv, true)) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Failed to activate 11h extensions!!"); |
| return -1; |
| } |
| priv->state_11h.is_11h_active = true; |
| } |
| |
| memset(&radar_params, 0, sizeof(struct mwifiex_radar_params)); |
| radar_params.chandef = chandef; |
| radar_params.cac_time_ms = cac_time_ms; |
| |
| memcpy(&priv->dfs_chandef, chandef, sizeof(priv->dfs_chandef)); |
| |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_CHAN_REPORT_REQUEST, |
| HostCmd_ACT_GEN_SET, 0, &radar_params, true)) |
| return -1; |
| |
| queue_delayed_work(priv->dfs_cac_workqueue, &priv->dfs_cac_work, |
| msecs_to_jiffies(cac_time_ms)); |
| return 0; |
| } |
| |
| static int |
| mwifiex_cfg80211_change_station(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *mac, |
| struct station_parameters *params) |
| { |
| int ret; |
| struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); |
| |
| /* we support change_station handler only for TDLS peers*/ |
| if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) |
| return -ENOTSUPP; |
| |
| /* make sure we are in station mode and connected */ |
| if ((priv->bss_type != MWIFIEX_BSS_TYPE_STA) || !priv->media_connected) |
| return -ENOTSUPP; |
| |
| priv->sta_params = params; |
| |
| ret = mwifiex_tdls_oper(priv, mac, MWIFIEX_TDLS_CONFIG_LINK); |
| priv->sta_params = NULL; |
| |
| return ret; |
| } |
| |
| /* station cfg80211 operations */ |
| static struct cfg80211_ops mwifiex_cfg80211_ops = { |
| .add_virtual_intf = mwifiex_add_virtual_intf, |
| .del_virtual_intf = mwifiex_del_virtual_intf, |
| .change_virtual_intf = mwifiex_cfg80211_change_virtual_intf, |
| .scan = mwifiex_cfg80211_scan, |
| .connect = mwifiex_cfg80211_connect, |
| .disconnect = mwifiex_cfg80211_disconnect, |
| .get_station = mwifiex_cfg80211_get_station, |
| .dump_station = mwifiex_cfg80211_dump_station, |
| .dump_survey = mwifiex_cfg80211_dump_survey, |
| .set_wiphy_params = mwifiex_cfg80211_set_wiphy_params, |
| .join_ibss = mwifiex_cfg80211_join_ibss, |
| .leave_ibss = mwifiex_cfg80211_leave_ibss, |
| .add_key = mwifiex_cfg80211_add_key, |
| .del_key = mwifiex_cfg80211_del_key, |
| .set_default_mgmt_key = mwifiex_cfg80211_set_default_mgmt_key, |
| .mgmt_tx = mwifiex_cfg80211_mgmt_tx, |
| .mgmt_frame_register = mwifiex_cfg80211_mgmt_frame_register, |
| .remain_on_channel = mwifiex_cfg80211_remain_on_channel, |
| .cancel_remain_on_channel = mwifiex_cfg80211_cancel_remain_on_channel, |
| .set_default_key = mwifiex_cfg80211_set_default_key, |
| .set_power_mgmt = mwifiex_cfg80211_set_power_mgmt, |
| .set_tx_power = mwifiex_cfg80211_set_tx_power, |
| .get_tx_power = mwifiex_cfg80211_get_tx_power, |
| .set_bitrate_mask = mwifiex_cfg80211_set_bitrate_mask, |
| .start_ap = mwifiex_cfg80211_start_ap, |
| .stop_ap = mwifiex_cfg80211_stop_ap, |
| .change_beacon = mwifiex_cfg80211_change_beacon, |
| .set_cqm_rssi_config = mwifiex_cfg80211_set_cqm_rssi_config, |
| .set_antenna = mwifiex_cfg80211_set_antenna, |
| .get_antenna = mwifiex_cfg80211_get_antenna, |
| .del_station = mwifiex_cfg80211_del_station, |
| .sched_scan_start = mwifiex_cfg80211_sched_scan_start, |
| .sched_scan_stop = mwifiex_cfg80211_sched_scan_stop, |
| #ifdef CONFIG_PM |
| .suspend = mwifiex_cfg80211_suspend, |
| .resume = mwifiex_cfg80211_resume, |
| .set_wakeup = mwifiex_cfg80211_set_wakeup, |
| .set_rekey_data = mwifiex_set_rekey_data, |
| #endif |
| .set_coalesce = mwifiex_cfg80211_set_coalesce, |
| .tdls_mgmt = mwifiex_cfg80211_tdls_mgmt, |
| .tdls_oper = mwifiex_cfg80211_tdls_oper, |
| .tdls_channel_switch = mwifiex_cfg80211_tdls_chan_switch, |
| .tdls_cancel_channel_switch = mwifiex_cfg80211_tdls_cancel_chan_switch, |
| .add_station = mwifiex_cfg80211_add_station, |
| .change_station = mwifiex_cfg80211_change_station, |
| CFG80211_TESTMODE_CMD(mwifiex_tm_cmd) |
| .get_channel = mwifiex_cfg80211_get_channel, |
| .start_radar_detection = mwifiex_cfg80211_start_radar_detection, |
| .channel_switch = mwifiex_cfg80211_channel_switch, |
| }; |
| |
| #ifdef CONFIG_PM |
| static const struct wiphy_wowlan_support mwifiex_wowlan_support = { |
| .flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT | |
| WIPHY_WOWLAN_NET_DETECT | WIPHY_WOWLAN_SUPPORTS_GTK_REKEY | |
| WIPHY_WOWLAN_GTK_REKEY_FAILURE, |
| .n_patterns = MWIFIEX_MEF_MAX_FILTERS, |
| .pattern_min_len = 1, |
| .pattern_max_len = MWIFIEX_MAX_PATTERN_LEN, |
| .max_pkt_offset = MWIFIEX_MAX_OFFSET_LEN, |
| .max_nd_match_sets = MWIFIEX_MAX_ND_MATCH_SETS, |
| }; |
| #endif |
| |
| static bool mwifiex_is_valid_alpha2(const char *alpha2) |
| { |
| if (!alpha2 || strlen(alpha2) != 2) |
| return false; |
| |
| if (isalpha(alpha2[0]) && isalpha(alpha2[1])) |
| return true; |
| |
| return false; |
| } |
| |
| static const struct wiphy_coalesce_support mwifiex_coalesce_support = { |
| .n_rules = MWIFIEX_COALESCE_MAX_RULES, |
| .max_delay = MWIFIEX_MAX_COALESCING_DELAY, |
| .n_patterns = MWIFIEX_COALESCE_MAX_FILTERS, |
| .pattern_min_len = 1, |
| .pattern_max_len = MWIFIEX_MAX_PATTERN_LEN, |
| .max_pkt_offset = MWIFIEX_MAX_OFFSET_LEN, |
| }; |
| |
| int mwifiex_init_channel_scan_gap(struct mwifiex_adapter *adapter) |
| { |
| u32 n_channels_bg, n_channels_a = 0; |
| |
| n_channels_bg = mwifiex_band_2ghz.n_channels; |
| |
| if (adapter->config_bands & BAND_A) |
| n_channels_a = mwifiex_band_5ghz.n_channels; |
| |
| adapter->num_in_chan_stats = n_channels_bg + n_channels_a; |
| adapter->chan_stats = vmalloc(sizeof(*adapter->chan_stats) * |
| adapter->num_in_chan_stats); |
| |
| if (!adapter->chan_stats) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| /* |
| * This function registers the device with CFG802.11 subsystem. |
| * |
| * The function creates the wireless device/wiphy, populates it with |
| * default parameters and handler function pointers, and finally |
| * registers the device. |
| */ |
| |
| int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter) |
| { |
| int ret; |
| void *wdev_priv; |
| struct wiphy *wiphy; |
| struct mwifiex_private *priv = adapter->priv[MWIFIEX_BSS_TYPE_STA]; |
| u8 *country_code; |
| u32 thr, retry; |
| |
| /* create a new wiphy for use with cfg80211 */ |
| wiphy = wiphy_new(&mwifiex_cfg80211_ops, |
| sizeof(struct mwifiex_adapter *)); |
| if (!wiphy) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: creating new wiphy\n", __func__); |
| return -ENOMEM; |
| } |
| wiphy->max_scan_ssids = MWIFIEX_MAX_SSID_LIST_LENGTH; |
| wiphy->max_scan_ie_len = MWIFIEX_MAX_VSIE_LEN; |
| wiphy->mgmt_stypes = mwifiex_mgmt_stypes; |
| wiphy->max_remain_on_channel_duration = 5000; |
| wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_ADHOC) | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | |
| BIT(NL80211_IFTYPE_P2P_GO) | |
| BIT(NL80211_IFTYPE_AP); |
| |
| wiphy->bands[NL80211_BAND_2GHZ] = &mwifiex_band_2ghz; |
| if (adapter->config_bands & BAND_A) |
| wiphy->bands[NL80211_BAND_5GHZ] = &mwifiex_band_5ghz; |
| else |
| wiphy->bands[NL80211_BAND_5GHZ] = NULL; |
| |
| if (adapter->drcs_enabled && ISSUPP_DRCS_ENABLED(adapter->fw_cap_info)) |
| wiphy->iface_combinations = &mwifiex_iface_comb_ap_sta_drcs; |
| else if (adapter->is_hw_11ac_capable) |
| wiphy->iface_combinations = &mwifiex_iface_comb_ap_sta_vht; |
| else |
| wiphy->iface_combinations = &mwifiex_iface_comb_ap_sta; |
| wiphy->n_iface_combinations = 1; |
| |
| /* Initialize cipher suits */ |
| wiphy->cipher_suites = mwifiex_cipher_suites; |
| wiphy->n_cipher_suites = ARRAY_SIZE(mwifiex_cipher_suites); |
| |
| if (adapter->regd) { |
| wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | |
| REGULATORY_DISABLE_BEACON_HINTS | |
| REGULATORY_COUNTRY_IE_IGNORE; |
| wiphy_apply_custom_regulatory(wiphy, adapter->regd); |
| } |
| |
| ether_addr_copy(wiphy->perm_addr, adapter->perm_addr); |
| wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; |
| wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME | |
| WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD | |
| WIPHY_FLAG_AP_UAPSD | |
| WIPHY_FLAG_SUPPORTS_SCHED_SCAN | |
| WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL | |
| WIPHY_FLAG_HAS_CHANNEL_SWITCH | |
| WIPHY_FLAG_PS_ON_BY_DEFAULT; |
| |
| if (ISSUPP_TDLS_ENABLED(adapter->fw_cap_info)) |
| wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS | |
| WIPHY_FLAG_TDLS_EXTERNAL_SETUP; |
| |
| #ifdef CONFIG_PM |
| wiphy->wowlan = &mwifiex_wowlan_support; |
| #endif |
| |
| wiphy->coalesce = &mwifiex_coalesce_support; |
| |
| wiphy->probe_resp_offload = NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 | |
| NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P; |
| |
| wiphy->max_sched_scan_ssids = MWIFIEX_MAX_SSID_LIST_LENGTH; |
| wiphy->max_sched_scan_ie_len = MWIFIEX_MAX_VSIE_LEN; |
| wiphy->max_match_sets = MWIFIEX_MAX_SSID_LIST_LENGTH; |
| |
| wiphy->available_antennas_tx = BIT(adapter->number_of_antenna) - 1; |
| wiphy->available_antennas_rx = BIT(adapter->number_of_antenna) - 1; |
| |
| wiphy->features |= NL80211_FEATURE_HT_IBSS | |
| NL80211_FEATURE_INACTIVITY_TIMER | |
| NL80211_FEATURE_LOW_PRIORITY_SCAN | |
| NL80211_FEATURE_NEED_OBSS_SCAN | |
| NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR | |
| NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR | |
| NL80211_FEATURE_ND_RANDOM_MAC_ADDR; |
| |
| if (ISSUPP_TDLS_ENABLED(adapter->fw_cap_info)) |
| wiphy->features |= NL80211_FEATURE_TDLS_CHANNEL_SWITCH; |
| |
| if (adapter->fw_api_ver == MWIFIEX_FW_V15) |
| wiphy->features |= NL80211_FEATURE_SK_TX_STATUS; |
| |
| /* Reserve space for mwifiex specific private data for BSS */ |
| wiphy->bss_priv_size = sizeof(struct mwifiex_bss_priv); |
| |
| wiphy->reg_notifier = mwifiex_reg_notifier; |
| |
| /* Set struct mwifiex_adapter pointer in wiphy_priv */ |
| wdev_priv = wiphy_priv(wiphy); |
| *(unsigned long *)wdev_priv = (unsigned long)adapter; |
| |
| set_wiphy_dev(wiphy, priv->adapter->dev); |
| |
| ret = wiphy_register(wiphy); |
| if (ret < 0) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: wiphy_register failed: %d\n", __func__, ret); |
| wiphy_free(wiphy); |
| return ret; |
| } |
| |
| if (!adapter->regd) { |
| if (reg_alpha2 && mwifiex_is_valid_alpha2(reg_alpha2)) { |
| mwifiex_dbg(adapter, INFO, |
| "driver hint alpha2: %2.2s\n", reg_alpha2); |
| regulatory_hint(wiphy, reg_alpha2); |
| } else { |
| if (adapter->region_code == 0x00) { |
| mwifiex_dbg(adapter, WARN, |
| "Ignore world regulatory domain\n"); |
| } else { |
| wiphy->regulatory_flags |= |
| REGULATORY_DISABLE_BEACON_HINTS | |
| REGULATORY_COUNTRY_IE_IGNORE; |
| country_code = |
| mwifiex_11d_code_2_region( |
| adapter->region_code); |
| if (country_code && |
| regulatory_hint(wiphy, country_code)) |
| mwifiex_dbg(priv->adapter, ERROR, |
| "regulatory_hint() failed\n"); |
| } |
| } |
| } |
| |
| mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, |
| HostCmd_ACT_GEN_GET, FRAG_THRESH_I, &thr, true); |
| wiphy->frag_threshold = thr; |
| mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, |
| HostCmd_ACT_GEN_GET, RTS_THRESH_I, &thr, true); |
| wiphy->rts_threshold = thr; |
| mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, |
| HostCmd_ACT_GEN_GET, SHORT_RETRY_LIM_I, &retry, true); |
| wiphy->retry_short = (u8) retry; |
| mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, |
| HostCmd_ACT_GEN_GET, LONG_RETRY_LIM_I, &retry, true); |
| wiphy->retry_long = (u8) retry; |
| |
| adapter->wiphy = wiphy; |
| return ret; |
| } |