igb: increase minimum rx buffer size to 1K
This update increases the minimum rx buffer size to 1K. The reason for this
change is to support SR-IOV and avoid any conflicts with the rings being able
to set their own MTU sizes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index e1d1c0c..6146f5d 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2233,18 +2233,8 @@
rctl |= E1000_RCTL_LPE;
/* Setup buffer sizes */
- switch (adapter->rx_buffer_len) {
- case IGB_RXBUFFER_256:
- rctl |= E1000_RCTL_SZ_256;
- break;
- case IGB_RXBUFFER_512:
- rctl |= E1000_RCTL_SZ_512;
- break;
- default:
- srrctl = ALIGN(adapter->rx_buffer_len, 1024)
- >> E1000_SRRCTL_BSIZEPKT_SHIFT;
- break;
- }
+ srrctl = ALIGN(adapter->rx_buffer_len, 1024)
+ >> E1000_SRRCTL_BSIZEPKT_SHIFT;
/* 82575 and greater support packet-split where the protocol
* header is placed in skb->data and the packet data is
@@ -3755,11 +3745,7 @@
* i.e. RXBUFFER_2048 --> size-4096 slab
*/
- if (max_frame <= IGB_RXBUFFER_256)
- adapter->rx_buffer_len = IGB_RXBUFFER_256;
- else if (max_frame <= IGB_RXBUFFER_512)
- adapter->rx_buffer_len = IGB_RXBUFFER_512;
- else if (max_frame <= IGB_RXBUFFER_1024)
+ if (max_frame <= IGB_RXBUFFER_1024)
adapter->rx_buffer_len = IGB_RXBUFFER_1024;
else if (max_frame <= IGB_RXBUFFER_2048)
adapter->rx_buffer_len = IGB_RXBUFFER_2048;
@@ -3770,11 +3756,6 @@
adapter->rx_buffer_len = PAGE_SIZE / 2;
#endif
- /* if sr-iov is enabled we need to force buffer size to 1K or larger */
- if (adapter->vfs_allocated_count &&
- (adapter->rx_buffer_len < IGB_RXBUFFER_1024))
- adapter->rx_buffer_len = IGB_RXBUFFER_1024;
-
/* adjust allocation if LPE protects us, and we aren't using SBP */
if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
(max_frame == MAXIMUM_ETHERNET_VLAN_SIZE))